Solubility and Electrolysis CBSE Class 10 Chemistry Worksheets Set 12

Download Class 10 Chemistry Practice Worksheets

Access comprehensive chapter-wise worksheets for Solubility and Electrolysis using the Solubility and Electrolysis CBSE Class 10 Chemistry Worksheets Set 12. Designed to align with the 2026-27 academic syllabus for Class 10 Chemistry, these printable practice sets help students reinforce key concepts and improve their overall exam readiness.

Access Solubility and Electrolysis Practice Papers and Solutions

Access the complete worksheet PDF for Class 10 Chemistry below. Regular practice with these targeted academic tasks builds familiarity with standard question patterns and helps secure higher marks in final school examinations.

Conventional Questions with Answers

Question 1. Why should temperature be specified when referring to the solubility of a substance?
Answer:
Solubility changes with temperature: for most solids it increases when temperature rises, while for gases and a few salts it decreases.
So a solubility value has no meaning unless the temperature is stated.
In simple words: The amount that dissolves depends on the temperature.

Teacher's Note:
1. Solubility is the grams of solute that saturate 100 g of solvent at a given temperature.
2. Always quote solubility with its temperature.

 

Question 2. Pick out the electrolytes and non-electrolytes: urea, nitric acid, glucose, potassium chloride, zinc sulphate, benzene, acetic acid and carbon tetrachloride.
Answer:
Electrolytes: nitric acid (strong), potassium chloride (strong), zinc sulphate (strong), acetic acid (weak).
Non-electrolytes: urea, glucose, benzene, carbon tetrachloride.
In simple words: Substances that make ions are electrolytes.

Teacher's Note:
1. Ionic compounds and acids are electrolytes.
2. Covalent organic compounds are usually non-electrolytes.

 

Question 3. What is electrolysis? Give the products of electrolysis of (a) aqueous NaOH (b) aqueous H₂SO₄ (c) fused sodium chloride (d) aqueous sodium chloride solution.
Answer:
Electrolysis is the chemical decomposition of an electrolyte by passing an electric current through its molten state or solution.
(a) Aqueous NaOH: hydrogen at the cathode and oxygen at the anode (water is decomposed).
(b) Aqueous H₂SO₄ (dilute): hydrogen at the cathode and oxygen at the anode.
(c) Fused NaCl: sodium at the cathode and chlorine at the anode.
(d) Concentrated aqueous NaCl: hydrogen at the cathode and chlorine at the anode, leaving NaOH in solution.
In simple words: Positive ions go to the cathode and negative ions to the anode, where they are discharged.

Teacher's Note:
1. Ions lower in the discharge series are discharged first.
2. In dilute acids and alkalis the net result is electrolysis of water.

 

Question 4. Account for the following: (a) Solid NaCl is a non-conductor but its aqueous solution conducts. (b) HCl gas is a non-conductor but its aqueous solution is a good conductor. (c) NaCl solution gives a white precipitate with AgNO₃ but CCl₄ does not. (d) When an acidified solution of copper sulphate is electrolysed with platinum electrodes, the remaining solution is colourless.
Answer:
(a) In solid NaCl the ions are fixed in the crystal. In water they become free to move and carry current.
(b) HCl is covalent gas and has no ions. In water it ionises to H⁺ (H₃O⁺) and Cl⁻.
(c) NaCl gives free Cl⁻ ions which form white AgCl; CCl₄ is covalent and has no Cl⁻ ions.
(d) Cu²⁺ ions (which give the blue colour) are discharged as copper at the cathode, so the solution loses its colour and becomes dilute sulphuric acid.
In simple words: Free ions are needed for conduction and for precipitation reactions.

Teacher's Note:
1. Always say whether ions are free to move.
2. The blue colour of copper sulphate is due to Cu²⁺.

 

Question 5. How does dilution affect the degree of ionisation?
Answer:
On dilution the ions are farther apart and the solvent separates more molecules.
The degree of ionisation increases with dilution and tends to 1 (complete ionisation) at infinite dilution (Ostwald's dilution law).
In simple words: More water means more ions in proportion.

Teacher's Note:
1. This matters most for weak electrolytes.
2. Strong electrolytes are almost fully ionised at all concentrations.

 

Question 6. In an experiment 55.22 g of a saturated solution of nitre on evaporation to dryness left 14.26 g of KNO₃. What is the solubility of KNO₃ at that temperature?
Answer:
Mass of water = 55.22 − 14.26 = 40.96 g.
Solubility = (14.26 / 40.96) × 100 = 34.8 g per 100 g of water.
In simple words: Solubility is the mass of solute per 100 g of water.

Teacher's Note:
1. Find the mass of solvent by subtraction first.
2. Do not divide by the mass of the solution.

 

Question 7. How will you show that the properties of an electrolytic solution are the properties of the ions of the electrolyte?
Answer:
Copper sulphate, copper chloride and copper nitrate solutions are all blue because they contain Cu²⁺ ions.
All chloride solutions (NaCl, KCl, BaCl₂) give a white precipitate with silver nitrate because they contain Cl⁻ ions.
Hence the properties depend on the ions present and not on the compound as a whole.
In simple words: Solutions with the same ion show the same property.

Teacher's Note:
1. Choose two or three examples with a common ion.
2. Chemical tests for ions work on this principle.

 

Question 8. The solubility of a substance at 15°C is 34.2 (g per 100 g of water). A saturated solution containing 267 g of water at 15°C is evaporated to dryness. What weight of substance is left?
Answer:
In 100 g of water 34.2 g dissolve.
In 267 g of water: (34.2 / 100) × 267 = 91.3 g.
In simple words: Use proportion between water and solute.

Teacher's Note:
1. Solubility is per 100 g of water.
2. Check: 91.3 / 267 ≈ 0.342.

 

Question 9. A solution of sodium chloride contains 40 g of the salt in 2 litres of solution. Calculate the molarity. (Na = 23, Cl = 35.5)
Answer:
Molar mass of NaCl = 58.5 g/mol, so 40 g = 0.684 mol.
Molarity = 0.684 mol / 2 L = 0.342 M.
In simple words: Molarity is moles of solute per litre of solution.

Teacher's Note:
1. Convert mass to moles first.
2. Divide by volume in litres.

 

Question 10. The density of a 3 molar solution of Na₂S₂O₃ (molecular weight 158) is 1.25 g/mL. Calculate the molality.
Answer:
Take 1 L of solution: mass = 1250 g and it contains 3 mol = 474 g of solute.
Mass of water = 1250 − 474 = 776 g = 0.776 kg.
Molality = 3 / 0.776 = 3.87 m.
In simple words: Use density to find the mass of the solution, then subtract the solute.

Teacher's Note:
1. Molality needs the mass of the solvent.
2. Start with a convenient 1 L sample.

CBSE Class 10 Chemistry Worksheets for Solubility and Electrolysis

Daily Practice Questions for Class 10 Chemistry

Review targeted practice exercises for Class 10 Chemistry Solubility and Electrolysis. Curated to match official CBSE guidelines, these printable problem sets support daily revision and improve overall test readiness.

Detailed Answers for Class 10 Chemistry Solubility and Electrolysis

Each worksheet draws directly from authorized standard textbooks to maintain academic accuracy. Evaluating your finished exercises against expert-verified solutions helps master the formal presentation standards expected in school evaluations.

Complete Your Chapter Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of free, up-to-date printable assignments to maximize your academic results in upcoming CBSE evaluations.

FAQs

Where can I download the 2026-27 CBSE printable worksheets for Class 10 Chemistry Solubility and Electrolysis?

You can download the latest chapter-wise printable worksheets for Class 10 Chemistry Solubility and Electrolysis for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.

Are these Solubility and Electrolysis Chemistry worksheets based on the new competency-based education (CBE) model?

Yes, Class 10 Chemistry worksheets for Solubility and Electrolysis focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.

Do the Class 10 Chemistry Solubility and Electrolysis worksheets have answers?

Yes, we have provided solved worksheets for Class 10 Chemistry Solubility and Electrolysis to help students verify their answers instantly.

Can I print these Solubility and Electrolysis Chemistry test sheets?

Yes, our Class 10 Chemistry test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.

What is the benefit of solving chapter-wise worksheets for Chemistry Class 10 Solubility and Electrolysis?

For Solubility and Electrolysis, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.