CBSE Class 8 Mathematics Construction Of Quadrilaterals Worksheet Set 01

Download Class 8 Mathematics Practice Worksheets

Review targeted academic worksheets with the CBSE Class 8 Mathematics Construction Of Quadrilaterals Worksheet Set 01. Built according to official educational standards for the 2026-27 term, these downloadable Class 8 Mathematics resources support effective daily practice and detailed self-evaluation for Construction Of Quadrilaterals.

Access Construction Of Quadrilaterals Practice Papers and Solutions

View or download the dedicated CBSE Class 8 Mathematics Construction Of Quadrilaterals Worksheet Set 01 resource below. Engaging with these practice papers under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Construction Of Quadrilaterals.

Q1 Construct a quadrilateral ABCD in which AB=3.6 cm, BC=5.5 cm ,CD = 4.9 cm ,DA=5.3 cm and AC=7.2 cm.
Answer: Steps of Construction:
1. Draw a line segment \(AC = 7.2\) cm.
2. With A as center and radius equal to 3.6 cm, draw an arc.
3. With C as center and radius equal to 5.5 cm, draw another arc to intersect the previous arc at B.
4. Join AB and CB.
5. With A as center and radius equal to 5.3 cm, draw an arc on the other side of AC.
6. With C as center and radius equal to 4.9 cm, draw another arc to intersect the previous arc at D.
7. Join AD and CD.
\(ABCD\) is the required quadrilateral.
In simple words: First draw the diagonal AC, then use compass to mark point B using sides AB and BC, and point D using sides AD and CD.
Exam Tip: Always draw a rough sketch first to correctly position the vertices and avoid intersecting arcs incorrectly.

 

Q2 Construct a quadrilateral PQRS in which PQ=3.5 cm, QR=5.5 cm PS = 4.5cm QS=5.5cm and SR =4.5 cm.
Answer: Steps of Construction:
1. Draw a line segment \(QS = 5.5\) cm as diagonal.
2. With Q as center and radius 3.5 cm, draw an arc.
3. With S as center and radius 4.5 cm, draw an arc to intersect at P.
4. Join QP and SP.
5. With Q as center and radius 5.5 cm, draw an arc on the other side of QS.
6. With S as center and radius 4.5 cm, draw an arc to intersect at R.
7. Join QR and SR.
\(PQRS\) is the required quadrilateral.
In simple words: Draw diagonal QS first, then construct triangle QPS and triangle QSR on opposite sides of QS using given side lengths.

Exam Tip: Double check compass width with a ruler before drawing arcs to ensure high accuracy.

 

Case 2 Four sides and one angle are given

Q3 Construct a quadrilateral WXYZ in which WX = 4 cm, XY = 3.5 cm, YZ= 5cm, WZ = 5.5cm and \(\angle X = 75^\circ\)
Answer: Steps of Construction:
1. Draw a line segment \(WX = 4\) cm.
2. At point X, construct an angle of \(75^\circ\) using a compass and ruler.
3. With X as center and radius 3.5 cm, draw an arc on the ray of the angle to locate point Y.
4. With W as center and radius 5.5 cm, draw an arc.
5. With Y as center and radius 5 cm, draw an arc to intersect the previous arc at Z.
6. Join WZ and YZ.
\(WXYZ\) is the required quadrilateral.
In simple words: Draw base WX, construct the given angle at X to find point Y, and then use compass intersections from W and Y to locate Z.
Exam Tip: Construct \(75^\circ\) by bisecting the angle between \(60^\circ\) and \(90^\circ\).

 

Q4 Construct a quadrilateral PQRS in which PQ=QR=3.5 cm ,PS=RS=5.2 cm and \(\angle PQR = 120^\circ\)
Answer: Steps of Construction:
1. Draw a line segment \(PQ = 3.5\) cm.
2. At point Q, construct an angle of \(120^\circ\).
3. With Q as center and radius 3.5 cm, draw an arc along the angle ray to mark point R.
4. Join QR.
5. With P as center and radius 5.2 cm, draw an arc.
6. With R as center and radius 5.2 cm, draw an arc to intersect the previous arc at S.
7. Join PS and RS.
\(PQRS\) is the required quadrilateral.
In simple words: Draw PQ, make \(120^\circ\) at Q to locate R, and then use radii from P and R to find S.

 

Q5 Construct a quadrilateral ABCD in which AB=4.6 cm, BC = 5.3 cm, \(\angle A = 60^\circ\), \(\angle B = 100^\circ\) and \(\angle C = 120^\circ\)
Answer: Steps of Construction:
1. Draw line segment \(AB = 4.6\) cm.
2. At A, construct an angle of \(60^\circ\).
3. At B, construct an angle of \(100^\circ\).
4. With B as center and radius 5.3 cm, draw an arc to cut the ray at B at point C.
5. At C, construct an angle of \(120^\circ\) such that its ray intersects the ray from A at point D.
\(ABCD\) is the required quadrilateral.
In simple words: Draw base AB, construct angle at A and B, locate C using side BC, and construct angle at C to find point D.

Exam Tip: Ensure the protractor or compass is aligned precisely when measuring obtuse angles like \(100^\circ\) and \(120^\circ\).

 

Q6 Is it possible to construct ABCD in which AB=5 cm, BC=7.5 cm, \(\angle A = 80^\circ\), \(\angle B = 140^\circ\) and \(\angle C = 145^\circ\)
Answer: No, it is not possible to construct this quadrilateral.
Reason: The sum of the interior angles of a quadrilateral is always \(360^\circ\). Here, given angles are \(\angle A = 80^\circ\), \(\angle B = 140^\circ\), and \(\angle C = 145^\circ\). The sum of these three angles is \(80^\circ + 140^\circ + 145^\circ = 365^\circ\), which already exceeds the total angle sum of a quadrilateral (\(360^\circ\)).
In simple words: The sum of three given angles is greater than \(360^\circ\), which violates the angle sum property of quadrilaterals.

Exam Tip: Always check angle sums before starting geometric constructions to verify if the polygon is geometrically possible.

 

Case 4 Three sides and two included angles are given

Q7 Construct a quadrilateral ABCD in which BC=6 cm, CD=6 cm, DA = 4 cm, \(\angle C = 60^\circ\) and \(\angle D = 75^\circ\)
Answer: Steps of Construction:
1. Draw a line segment \(CD = 6\) cm.
2. At C, construct an angle of \(60^\circ\).
3. With C as center and radius 6 cm, draw an arc on the angle ray to locate point B.
4. At D, construct an angle of \(75^\circ\).
5. With D as center and radius 4 cm, draw an arc on this angle ray to locate point A.
6. Join AB.
\(ABCD\) is the required quadrilateral.
In simple words: Start with base CD, construct angles at both C and D, mark points B and A along the respective rays, and join AB.
Exam Tip: Make sure the included angles are built directly on the endpoints of the given base segment.

 

Q8 Construct a quadrilateral PQRS in which PQ=PS=5cm RS = 5.5cm \(\angle P = 90^\circ\), \(\angle S = 120^\circ\)
Answer: Steps of Construction:
1. Draw a line segment \(PS = 5\) cm.
2. At P, construct an angle of \(90^\circ\).
3. With P as center and radius 5 cm, draw an arc on the ray to locate point Q.
4. At S, construct an angle of \(120^\circ\).
5. With S as center and radius 5.5 cm, draw an arc on this angle ray to locate point R.
6. Join QR.
\(PQRS\) is the required quadrilateral.
In simple words: Draw side PS, construct \(90^\circ\) at P and \(120^\circ\) at S, cut off lengths for Q and R, and connect QR.

Exam Tip: Verify the \(90^\circ\) and \(120^\circ\) constructions using perpendicular checks or geometric properties.

 

Case 5 Three sides and two diagonals are given

Q9 Construct a quadrilateral PQRS in which QR=7 cm PR=PS=5.5cm RS = 4.5cm and QS=9.5 cm.
Answer: Steps of Construction:
1. Draw line segment \(QR = 7\) cm.
2. With Q as center and radius 9.5 cm (diagonal QS), draw an arc.
3. With R as center and radius 4.5 cm (side RS), draw an arc to intersect at S.
4. Join QS and RS.
5. With R as center and radius 5.5 cm (diagonal PR), draw an arc.
6. With S as center and radius 5.5 cm (side PS), draw an arc to intersect at P.
7. Join QP, PR, and PS.
\(PQRS\) is the required quadrilateral.
In simple words: Construct triangle QRS using side QR, diagonal QS, and side RS first. Then use S and R as centers to locate vertex P.
Exam Tip: When two diagonals and three sides are given, identify the triangle whose all three sides are known (or can be formed) to start the base structure.

 

Q10 Is it possible to construct a quadrilateral in ABCD which AB=3cm, CD = 5.5cm , DA=6 cm BC =4 cm and BD=9 cm ? If not, give reason.
Answer: No, it is not possible to construct this quadrilateral.
Reason: Consider triangle ABD formed by sides AB (\(3\) cm), DA (\(6\) cm), and diagonal BD (\(9\) cm). According to the triangle inequality theorem, the sum of any two sides of a triangle must be strictly greater than the third side.
Here, \(AB + AD = 3 + 6 = 9\) cm, which is equal to diagonal BD (\(9\) cm), not greater than it. Thus, triangle ABD cannot be formed.
In simple words: The sum of two sides AB and DA equals the diagonal BD, violating the triangle inequality rule.

Exam Tip: Always test triangle inequality (\(a + b > c\)) for component triangles before constructing quadrilaterals involving diagonals.

 

Q11 Construct a quadrilateral LMNO ,given that MN=4.5 cm, LO=5.5 cm ,NO=5 cm, LN=5.5 cm and MO=7 cm
Answer: Steps of Construction:
1. Consider triangle MNO with sides \(MN = 4.5\) cm, \(NO = 5\) cm, and diagonal \(MO = 7\) cm.
2. Draw base \(MO = 7\) cm.
3. With M as center and radius 4.5 cm, draw an arc.
4. With O as center and radius 5 cm, draw an arc to intersect at N.
5. Join MN and ON.
6. Now locate vertex L using diagonals and remaining sides: With O as center and radius 5.5 cm (\(LO\)), draw an arc.
7. With N as center and radius 5.5 cm (\(LN\)), draw an arc to intersect at L.
8. Join OL, NL, and ML.
\(LMNO\) is the required quadrilateral.
In simple words: Draw triangle MNO first using MO as base, then locate point L using radii from O and N.

 

Q12 Draw a rhombus PQRS where PR=7 cm and QS=5 cm.
Answer: Steps of Construction:
1. Draw diagonal \(PR = 7\) cm.
2. Construct the perpendicular bisector of PR, intersecting PR at midpoint O.
3. With O as center, draw arcs of radius \(\frac{5}{2} = 2.5\) cm above and below PR on the perpendicular bisector to mark points Q and S.
4. Join PQ, QR, RS, and SP.
\(PQRS\) is the required rhombus.
In simple words: Draw diagonal PR, find its perpendicular bisector, and mark off half the length of the second diagonal on both sides of the center.
Exam Tip: Diagonals of a rhombus bisect each other at right angles (\(90^\circ\)), which is the key property used for construction.

 

Q13 Draw a square whose one diagonal is 5 cm.
Answer: Steps of Construction:
1. Draw diagonal \(AC = 5\) cm.
2. Draw the perpendicular bisector of AC, intersecting it at midpoint O.
3. With O as center, cut arcs of length equal to half the diagonal (\(2.5\) cm) along the perpendicular bisector in both directions to get vertices B and D.
4. Join AB, BC, CD, and DA.
\(ABCD\) is the required square.
In simple words: A square is a special rhombus whose diagonals are equal and perpendicular. Use the same diagonal bisector method as a rhombus.

Q14 Construct a parallelogram ABCD in which AB=4 cm , BC=3 cm and \(\angle A=60^\circ\).
Answer: Steps of Construction:
1. Draw line segment \(AB = 4\) cm.
2. At point A, construct an angle of \(60^\circ\).
3. With A as center and radius 3 cm (\(AD = BC = 3\) cm in a parallelogram), draw an arc on the ray to locate point D.
4. With D as center and radius 4 cm (\(DC = AB = 4\) cm), draw an arc.
5. With B as center and radius 3 cm (\(BC = 3\) cm), draw an arc to intersect at C.
6. Join DC and BC.
\(ABCD\) is the required parallelogram.
In simple words: Use opposite sides equal property of parallelograms (\(AB = CD\) and \(AD = BC\)) along with angle A to complete the figure.
Exam Tip: Opposite sides of a parallelogram are equal in length, allowing you to use compass measurements for the remaining sides.

 

Kite - when adjacent sides and a diagonal are given.

Q15 Construct a kite EASY in which AY=8 cm , EY=4 cm and SY=6 cm. Mention the properties that shall be used for the construction?
Answer: Properties used for construction:
1. In a kite, two pairs of adjacent sides are equal in length. Here, let adjacent sides be \(EA = EY = 4\) cm and \(SA = SY = 6\) cm, with AY acting as the main diagonal.
Steps of Construction:
1. Draw diagonal \(AY = 8\) cm.
2. With A as center and radius 4 cm, draw an arc on one side of AY.
3. With Y as center and radius 4 cm, draw an arc to intersect at E.
4. Join AE and EY.
5. With A as center and radius 6 cm, draw an arc on the opposite side of AY.
6. With Y as center and radius 6 cm, draw an arc to intersect at S.
7. Join AS and YS.
\(EASY\) is the required kite.
In simple words: Construct two triangles (EAY and SAY) on opposite sides of diagonal AY using the equal adjacent side lengths of a kite.

Exam Tip: A kite has two pairs of equal adjacent sides meeting at the endpoints of its diagonals.

Download Class 8 Mathematics Construction Of Quadrilaterals Practice Worksheets

Practice Exercises for Class 8 Mathematics Construction Of Quadrilaterals

Review targeted practice exercises for Class 8 Mathematics Construction Of Quadrilaterals. Curated to match official CBSE guidelines, these printable problem sets support daily revision and improve overall test readiness.

Step-by-Step Solutions and Practice Guidelines

Designed around the official curriculum for Class 8 Mathematics, these practice sheets guarantee standard compliance. Reviewing step-by-step solutions after completion sharpens your accuracy and clarifies complex sub-topics within Construction Of Quadrilaterals.

Enhance Speed with Online Practice

Consistent engagement with these exercises builds familiarity with recurring exam themes. If specific areas within Construction Of Quadrilaterals cause trouble, utilize our dedicated NCERT solutions for Class 8 Mathematics to clear up doubts immediately.

FAQs

Where can I download the 2026-27 CBSE printable worksheets for Class 8 Mathematics Construction Of Quadrilaterals?

You can download the latest chapter-wise printable worksheets for Class 8 Mathematics Construction Of Quadrilaterals for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.

Are these Construction Of Quadrilaterals Mathematics worksheets based on the new competency-based education (CBE) model?

Yes, Class 8 Mathematics worksheets for Construction Of Quadrilaterals focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.

Do the Class 8 Mathematics Construction Of Quadrilaterals worksheets have answers?

Yes, we have provided solved worksheets for Class 8 Mathematics Construction Of Quadrilaterals to help students verify their answers instantly.

Can I print these Construction Of Quadrilaterals Mathematics test sheets?

Yes, our Class 8 Mathematics test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.

What is the benefit of solving chapter-wise worksheets for Mathematics Class 8 Construction Of Quadrilaterals?

For Construction Of Quadrilaterals, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.