Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 05 First Law Of Thermodynamics Chemical Energetics
Explore reliable textbook solutions for Chapter 05 First Law Of Thermodynamics Chemical Energetics tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice Class 11 Chemistry Solutions: Chapter 05 First Law Of Thermodynamics Chemical Energetics
Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
First Law Of Thermodynamics And Chemical Energetics - Questions and Answers (Part 3)
Short Questions with Answers
Question 26. The enthalpy of combustion of glucose (C6H12O6) is 2840 kJ mol-1. What is its calorific value?
Solution. Molar mass of glucose = 180 g mol-1.
Calorific value = 2840 kJ mol-1 / 180 g mol-1 = 15.78 kJ g-1.
Teacher's Note: Calorific value is heat per gram, so divide molar enthalpy by molar mass.
Exam Note: Write units kJ g-1; show division by 180.
Question 27. Heat of dissociation of acetic acid is 1.9 kJ mol-1. How much heat will be evolved when one mole of acetic acid is neutralized by NaOH solution?
Solution. 57.1 - 1.9 = 55.2 kJ
Teacher's Note: Weak acid uses part of the 57.1 kJ neutralisation heat for ionisation.
Exam Note: State: 57.1 minus ionisation heat.
Question 28. Fill in the blanks.
(i) The dissolution of CuSO4 is ....... thermic while dissolution of CuSO4·5H2O is ........thermic.
(ii) ΔHsublimation = ΔHfusion + ............
(iii) The enthalpy of solution of BaCl2 (s) and BaCl2·2H2O (s) are x and y kJ mol-1 respectively. Then enthalpy of hydration of BaCl2 will be........
Solution. (i) exothermic, endothermic
(ii) ΔHvaporisation
(iii) (x - y) kJ mol-1
Teacher's Note: Hydration enthalpy = enthalpy of solution of anhydrous salt minus that of hydrate (Hess).
Exam Note: Remember sublimation = fusion + vaporisation.
Question 29. Why bond energy is taken as an average value? Explain with a suitable example.
Solution. The bond energy of the same bond in different polyatomic molecules is not the same, e.g. the bond energy of C-Cl bond in CH3Cl, CH3CH2Cl etc. is not same. Even in the same polyatomic molecule like CH4, the bond energy of all the four C-H bonds is not same. Hence an average value is taken.
Teacher's Note: Successive bond dissociations in CH4 differ, so the tabulated value is the mean.
Exam Note: Give the CH4 example.
Question 30. Give appropriate reasons for the following: (i) It is preferable to determine a change in enthalpy than change in internal energy. (ii) It is necessary to define the 'Standard state'. (iii) It is necessary to specify the phases of the reactants and products in a thermochemical equation. (N.C.E.R.T.)
Solution. (i) Change in enthalpy is the heat evolved or absorbed at constant pressure. As most of the reactions are carried out in open vessels i.e. at constant pressure of one atmosphere, hence change in enthalpy is preferred.
(ii) This is because the enthalpy of a reaction depends upon the conditions under which the reaction is carried out.
(iii) The enthalpy change of a reaction depends upon the physical state of the reactants and products e.g. standard enthalpy of formation of water is not same for H2O (g) and H2O (l).
Teacher's Note: Open vessels mean constant pressure, so qp = ΔH is the measurable quantity.
Exam Note: Give one reason per part with an example.
Question 31. The enthalpy of neutralisation of acetic acid by KOH is -55.8 kJ mol-1 while that of hydrochloric acid by KOH is -57.3 kJ mol-1. Why are they different and what does the difference represent? (N.C.E.R.T.)
Solution. Heat of neutralisation of acetic acid is less than that of HCl because acetic acid is a weak acid and does not ionize completely. Some heat is used up for the ionisation of acetic acid. The difference represents the enthalpy of ionization of acetic acid.
Teacher's Note: Difference 57.3 - 55.8 = 1.5 kJ mol-1 is the ionisation enthalpy of the weak acid.
Exam Note: Mention incomplete ionisation of weak acid.
Question 32. What is the basic difference between enthalpy of formation and enthalpy of reaction? Illustrate with suitable examples. (N.C.E.R.T.)
Solution. (i) Enthalpy of formation is enthalpy change for the formation of 1 mole of the substance from its elements. For example, let us consider the following two thermochemical equations:
H2 (g) + ½O2 (g) → H2O (l), ΔH° = -285.8 kJ mol-1
and 2H2 (g) + O2 (g) → 2H2O (l), ΔH° = -571.6 kJ mol-1
In the first case, ΔH° is enthalpy of formation of H2O (l), while in the second case, it is enthalpy of reaction.
(ii) Enthalpy of formation is for the formation of 1 mole of the substance from its elements only. For example, CaO (s) + CO2 (g) → CaCO3 (s), ΔH° = -178.3 kJ mol-1. As 1 mole of CaCO3 (s) has been formed from CaO (s) and CO2 (g) and not from its elements, ΔH° is not enthalpy of formation. It is simply enthalpy of reaction.
Teacher's Note: Formation: one mole, from elements in standard states; reaction enthalpy has no such restriction.
Exam Note: Contrast with the two H2O equations.
Question 33. Why in a reaction enthalpy change is always written per mole even if two or more moles of a reactant or product are present in the balanced equation?
Solution. This is because if the units are multiplied by a number, the units do not change.
Teacher's Note: Units kJ mol-1 refer to the reaction as written, not to a species.
Exam Note: Answer in one line.
Additional Questions - Assertion-Reason Type Questions
Question 1 (Assertion-Reason). Assertion: The value of enthalpy of neutralization of a weak acid and a strong base is numerically less than 57.1 kJ.
Reason: All the OH- ions furnished by 1 g equivalent of a strong base are not completely neutralized by the H3O+ ions from the weak acid.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (a). Weak acid does not ionise fully, so part of the heat is used for its ionisation; the reason explains the lower value.
Teacher's Note: Weak acid ionisation absorbs part of the neutralisation heat.
Exam Note: Link reason to lower magnitude.
Question 2 (Assertion-Reason). Assertion: Standard enthalpy of graphite is lower than that of diamond.
Reason: Standard enthalpy of elements is taken to be zero arbitrarily.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (b). Both statements are correct (graphite 0, diamond +1.9 kJ mol-1), but the arbitrary zero for elements does not explain why graphite is lower.
Teacher's Note: Graphite is lower because it is the more stable allotrope.
Exam Note: Reason does not explain assertion.
Question 3 (Assertion-Reason). Assertion: Enthalpy of combustion is negative.
Reason: Combustion reaction can be exothermic or endothermic.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (c). Combustion is always exothermic, so the assertion is correct and the reason is incorrect.
Teacher's Note: Combustion releases heat, so ΔHc is always negative.
Exam Note: Reason is false: always exothermic.
Question 4 (Assertion-Reason). Assertion: Absolute value of H cannot be determined.
Reason: Absolute value of E cannot be determined.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (a). H = E + PV; since the absolute value of E cannot be determined, absolute H cannot be determined either.
Teacher's Note: H contains E, so the same limitation applies.
Exam Note: Use H = E + PV.
Question 5 (Assertion-Reason). Assertion: Endothermic compounds are more stable than the exothermic compounds.
Reason: Endothermic reactions have positive enthalpy of formation.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (d). Endothermic compounds are less stable because their enthalpies of formation are positive, so the assertion is incorrect and the reason is correct.
Teacher's Note: Positive ΔHf means energy-rich, hence less stable.
Exam Note: Assertion false, reason true.
Question 6 (Assertion-Reason). Assertion: Enthalpy of vaporisation is always endothermic.
Reason: Water is an exothermic compound.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (b). Both statements are correct, but the reason (ΔHf of water negative) does not explain why vaporisation absorbs heat.
Teacher's Note: Vaporisation absorbs heat to overcome intermolecular attractions.
Exam Note: Reason is unrelated to assertion.
Question 7 (Assertion-Reason). Assertion: Enthalpy of neutralization is always exothermic.
Reason: Neutralization involves reaction between an acid and base.
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (a). Key answer as printed in the book.
Teacher's Note: Formation of water from H+ and OH- releases heat.
Exam Note: Acid-base reaction releases heat.
Question 8 (Assertion-Reason). Assertion: Enthalpy of neutralization for both HNO3 and HCl with NaOH is 57.1 kJ per mole.
Reason: NaOH is a strong electrolyte. (A.I.I.M.S. 1997)
Key: (a) both correct and Reason is the correct explanation; (b) both correct but Reason is not the correct explanation; (c) Assertion correct but Reason incorrect; (d) Assertion incorrect but Reason correct; (e) both incorrect.
Solution. Answer: (b). Enthalpy of neutralisation is the same for HNO3 and HCl with NaOH because both acids are strong; the strength of NaOH alone is not the correct explanation.
Teacher's Note: Strong acid and strong base neutralisation is just H+ + OH- → H2O.
Exam Note: Both acids strong gives same value.
Additional Questions - True/False Statements (which are not true; rewrite correctly)
Question 1 (True/False). An isolated system is that which can exchange energy but not matter with the surroundings.
Solution. Not true. An isolated system can exchange neither matter nor energy; a closed system exchanges energy but not matter.
Teacher's Note: Closed versus isolated is a frequent exam trap.
Exam Note: Rewrite: closed system.
Question 2 (True/False). An extensive property depends upon the amount of the substance.
Solution. True. Examples: mass, volume, enthalpy.
Teacher's Note: Extensive properties scale with amount.
Exam Note: Give mass or volume as example.
Question 3 (True/False). In an isothermal process, temperature remains constant because no heat can enter or leave the system.
Solution. Not true. In an isothermal process temperature stays constant because heat can flow in or out to compensate; no heat exchange describes an adiabatic process.
Teacher's Note: Isothermal allows heat exchange; adiabatic forbids it.
Exam Note: Rewrite using adiabatic definition.
Question 4 (True/False). The work done on the system is positive whereas the heat absorbed by the system is positive.
Solution. True. With the IUPAC sign convention, work done on the system and heat absorbed by the system are both positive.
Teacher's Note: Both increase the internal energy.
Exam Note: Quote the sign convention.
Question 5 (True/False). Internal energy change is the heat change at constant volume whereas the enthalpy change is the heat change at constant pressure.
Solution. True. ΔU = qv and ΔH = qp.
Teacher's Note: Constant volume gives ΔU; constant pressure gives ΔH.
Exam Note: Write ΔU = qv, ΔH = qp.
Question 6 (True/False). Internal energy is a state function but enthalpy is not a state function.
Solution. Not true. Both internal energy and enthalpy (H = U + PV) are state functions.
Teacher's Note: H is built from state functions U, P and V.
Exam Note: Rewrite: both are state functions.
Question 7 (True/False). The standard state of a substance is 0°C and 1 atm pressure.
Solution. Not true. The standard state refers to the most stable form at 25°C (298 K) and 1 atm pressure (not 0°C). Corrected: the book's printed key does not list statement 7, but it contradicts the book's own 25°C standard conditions.
Teacher's Note: Thermochemical standard conditions use 298 K, not 273 K.
Exam Note: Standard: 298 K, 1 atm.
Question 8 (True/False). The S.I. unit of heat is 'calorie'.
Solution. Not true. The S.I. unit of heat is the joule (J); calorie is not an S.I. unit (1 cal = 4.184 J).
Teacher's Note: Heat is energy, so the SI unit is the joule.
Exam Note: Joule, not calorie.
Question 9 (True/False). The absolute value of internal energy of a substance cannot be determined.
Solution. True. Only changes in internal energy can be measured.
Teacher's Note: Only ΔU is measurable, not absolute U.
Exam Note: Say only ΔU is measurable.
Question 10 (True/False). W is positive when the work is done on the system.
Solution. True. By the IUPAC convention used in this book, work done on the system is positive. (The book's key lists 10 as not true, which conflicts with its own sign convention in statement 4.)
Teacher's Note: Sign conventions differ: work on the system is positive in IUPAC.
Exam Note: State convention used.
Question 11 (True/False). Enthalpy of combustion is the amount of heat evolved when the number of moles as represented by the balanced equation have been completely oxidized.
Solution. True. This matches the standard definition when the equation shows one mole of the substance. (The book's key lists 11 as not true.)
Teacher's Note: Combustion enthalpy is defined per mole of substance burnt.
Exam Note: Define per mole.
Question 12 (True/False). The total amount of heat evolved or absorbed in a reaction depends upon the number of steps in which the reaction takes place.
Solution. Not true. By Hess's law the total heat change is independent of the number of steps and depends only on initial and final states.
Teacher's Note: Hess's law: path independent.
Exam Note: Cite Hess's law.
Question 13 (True/False). The enthalpy of combustion of carbon (graphite) is not equal to that of carbon (diamond).
Solution. True. Graphite and diamond have different enthalpies, so their enthalpies of combustion differ (about -393.5 and -395.4 kJ mol-1). (The book's key lists 13 as not true; the statement is correct.)
Teacher's Note: Different allotropes start at different enthalpy, so combustion enthalpies differ.
Exam Note: Difference equals graphite to diamond ΔH.
Question 14 (True/False). Enthalpy of solution is always positive.
Solution. Not true. Enthalpy of solution may be positive or negative, e.g. dissolution of anhydrous CuSO4 is exothermic.
Teacher's Note: Dissolution can be endothermic or exothermic.
Exam Note: Give CuSO4 as counter-example.
Question 15 (True/False). The total amount of heat evolved or absorbed in a reaction depends upon the number of steps in which the reaction takes place.
Solution. Not true. Total heat change is independent of the number of steps (Hess's law).
Teacher's Note: Same principle as statement 12: Hess's law.
Exam Note: State Hess's law.
Question 16 (True/False). The enthalpy of combustion of carbon (graphite) is not equal to that of carbon (diamond).
Solution. True. Same as statement 13: the two allotropes have different enthalpies of combustion.
Teacher's Note: Allotropes differ in stability, hence in combustion enthalpy.
Exam Note: Compare graphite and diamond.
Additional Questions - Fill in the Blanks
Question 1 (Fill in the blank). A system which can exchange only energy but not matter with the surroundings is called ......
Solution. Closed system
Teacher's Note: Closed: energy exchange only; open: both; isolated: neither.
Exam Note: Distinguish closed from isolated.
Question 2 (Fill in the blank). A thermodynamic property which depends only on the nature of the substance is called ......
Solution. Intensive property
Teacher's Note: Intensive properties do not depend on amount, e.g. density.
Exam Note: Contrast with extensive.
Question 3 (Fill in the blank). A process which is carried out ....... is called a reversible process.
Solution. Infinitesimally slowly
Teacher's Note: Reversible process passes through successive near-equilibrium states.
Exam Note: Write: infinitesimally slowly.
Question 4 (Fill in the blank). Law of conservation of energy is also known as ........
Solution. First law of thermodynamics
Teacher's Note: ΔU = q + w expresses energy conservation.
Exam Note: Name the first law.
Question 5 (Fill in the blank). The heat change occurring at constant pressure is called ......
Solution. Enthalpy change
Teacher's Note: At constant pressure qp = ΔH.
Exam Note: Link qp with ΔH.
Question 6 (Fill in the blank). The difference between molar heat capacity at constant pressure and at constant volume for one mole of an ideal gas is equal to ......
Solution. Gas constant, R
Teacher's Note: Cp - Cv = R for one mole of ideal gas.
Exam Note: Write Cp - Cv = R.
Question 7 (Fill in the blank). (a) A system is said to be ..... if it can neither exchange matter nor energy with the surroundings. (b) The heat content of the products is more than that of the reactants in an ....... reaction. (I.I.T. 1993)
Solution. (a) isolated; (b) endothermic. Corrected: the book's printed key gives (a) as "closed", but a system that exchanges neither matter nor energy is an isolated system.
Teacher's Note: Closed systems still exchange energy; isolated ones exchange nothing.
Exam Note: Neither matter nor energy: isolated.
Question 8 (Fill in the blank). When Fe (s) is dissolved in aqueous hydrochloric acid in a closed vessel, the work done is ..........
Solution. Zero. Closed vessel means ΔV = 0, so w = -PΔV = 0.
Teacher's Note: No volume change means no pressure-volume work.
Exam Note: Cite w = -PΔV with ΔV = 0.
Question 9 (Fill in the blank). Enthalpy is an ..........property.
Solution. Extensive
Teacher's Note: Doubling the amount doubles H.
Exam Note: Enthalpy is extensive.
Question 10 (Fill in the blank). The part of the universe chosen for study of energy changes is called ........... whereas the rest of the universe is called ....
Solution. System; surroundings
Teacher's Note: System plus surroundings makes the universe.
Exam Note: Define system and surroundings.
Question 11 (Fill in the blank). The energy stored within a substance is called its.....
Solution. Internal energy
Teacher's Note: Internal energy is the total kinetic and potential energy within a substance.
Exam Note: Name internal energy.
Question 12 (Fill in the blank). A reaction in which heat is absorbed is called an ....
Solution. Endothermic reaction
Teacher's Note: Endothermic reactions have positive ΔH.
Exam Note: ΔH is positive.
Question 13 (Fill in the blank). The enthalpy of any element in the standard state is taken as......
Solution. Zero
Teacher's Note: Reference level is zero by convention.
Exam Note: Mention standard state.
Question 14 (Fill in the blank). Heat of neutralization of an acid is the amount of heat evolved when .... of .... is neutralized by .... of ....
Solution. One gram equivalent; the acid; excess; base
Teacher's Note: Defined per gram equivalent of acid with excess base.
Exam Note: Mention excess base.
Question 15 (Fill in the blank). ΔHsublimation = .... + ....
Solution. ΔHfusion + ΔHvaporisation
Teacher's Note: Solid to gas equals solid to liquid plus liquid to gas (Hess).
Exam Note: Add fusion and vaporisation enthalpies.
Question 16 (Fill in the blank). The enthalpy of combustion of benzene is -3264 kJ mol-1. The heat evolved in the combustion of 39 g of benzene will be ....
Solution. 1632 kJ. 39 g = 39/78 = 0.5 mol of C6H6; heat = 0.5 × 3264 = 1632 kJ.
Teacher's Note: Convert grams to moles using 78 g mol-1.
Exam Note: Molar mass of benzene is 78.
Question 17 (Fill in the blank). Coal and petroleum are called .... fuels.
Solution. Fossil
Teacher's Note: Formed from ancient plant and animal remains; non-renewable.
Exam Note: Name: fossil fuels.
Question 18 (Fill in the blank). The heat content of the products is more than that of the reactants in an ..... reaction.
Solution. Endothermic
Teacher's Note: Products higher in enthalpy so ΔH is positive.
Exam Note: Compare H of products and reactants.
Question 19 (Fill in the blank). The enthalpy of neutralization of a weak acid is .......... than that of a strong acid. The difference of the latter from the former is known as enthalpy of ..........of the weak acid. (Bihar C.E.E. 1998)
Solution. Less; ionization
Teacher's Note: Difference is the enthalpy of ionisation of the weak acid.
Exam Note: Name: enthalpy of ionisation.
Additional Questions - Matching Type Questions
| A | B |
|---|---|
| 1. System can exchange both matter and energy with the surroundings. | 1. Closed system |
| 2. System can exchange neither matter nor energy with the surroundings. | 2. Open system |
| 3. System can exchange energy with the surroundings but not matter. | 3. Isolated system |
| 4. System can exchange matter with the surroundings but not energy. | 4. No such system exists. |
Solution. 1-2, 2-3, 3-1, 4-4
Teacher's Note: Open exchanges both, isolated neither, closed only energy; matter-only exchange is impossible.
Exam Note: Learn the three system types.
| A | B |
|---|---|
| 1. A process which is carried out infinitesimally slowly. | 1. Isochoric process |
| 2. A process is carried out such that temperature remains constant. | 2. Isobaric process |
| 3. A process in which no heat enters or leaves the system. | 3. Isothermal process |
| 4. A process in which the volume is kept constant. | 4. Reversible process |
| 5. A process in which pressure is kept constant. | 5. Adiabatic process |
Solution. 1-4, 2-3, 3-5, 4-1, 5-2
Teacher's Note: Constant T is isothermal, q = 0 adiabatic, constant V isochoric, constant P isobaric.
Exam Note: Prefixes iso- (same) and adiabatic (no heat) decode names.
Question 34. One kg of graphite is burnt in a closed vessel. The same amount of the same sample is burnt in an open vessel. Will the heat evolved in the two cases be same? If not, in which case it would be greater?
Solution. Same in both cases because Δng = 0.
Teacher's Note: C + O2 → CO2 has no change in gas moles, so qp = qv.
Exam Note: Link ΔH = ΔU + ΔngRT with Δng = 0.
Question 35. Why standard heat of formation of diamond is not zero though it is an element? (H.S.B. 1997)
Solution. The standard state chosen for carbon is graphite and not diamond because graphite is more common and stable form of carbon in the standard state.
Teacher's Note: Only the reference (most stable) form has ΔHf° = 0.
Exam Note: Say graphite is the reference state.
Question 36. Is the bond energy of all the four C-H bonds in CH4 molecule equal? If not then why? How is the C-H bond energy then reported?
Solution. No because after breaking of C-H bonds one by one, the electronic environments change. The reported value is the average value of the four bond dissociation energies of the four C-H bonds.
Teacher's Note: Each successive C-H cleavage leaves a different radical environment.
Exam Note: Mention average of four dissociation energies.
Question 37. The enthalpy change for the reaction N2 (g) + 3H2 (g) → 2NH3 (g) is -92.2 kJ. What is the enthalpy of formation of ammonia?
Solution. Aim: ½N2 (g) + 3/2 H2 (g) → NH3 (g), ΔHf° = ?
Given: N2 (g) + 3H2 (g) → 2NH3 (g), ΔHr° = -92.2 kJ
∴ ΔHf° (NH3) = -92.2/2 = -46.1 kJ.
Teacher's Note: Formation enthalpy is per mole of NH3, so halve the reaction enthalpy.
Exam Note: Divide by 2 for one mole.
Question 38. What is the basis of Hess's Law?
Solution. Hess's law is based upon the fact that enthalpy is a state function i.e. enthalpy change depends only upon the initial state (i.e. enthalpy of the reactants) and the final state (i.e. enthalpy of the products) and does not depend upon the path followed.
Teacher's Note: Path independence of state functions makes enthalpies of steps add up.
Exam Note: State function; path independent.
Question 39. Write the standard state for each of the following in which ΔHf° is taken as zero: Carbon, Sulphur and Bromine.
Solution. C (graphite), S8 (Rhombic) and Br2 (l).
Teacher's Note: Standard state is the most stable form at 298 K and 1 bar.
Exam Note: Name allotrope and physical state.
Question 40. Given that: O (g) + e- → O- (g), ΔH = -142 kJ mol-1 and O (g) + 2e- → O2- (g), ΔH = +712 kJ mol-1. What will be ΔH for O- (g) + e- → O2- (g)?
Solution. The second reaction takes place in two steps as: O (g) + e- → O- (g), ΔH = ΔH1; O- (g) + e- → O2- (g), ΔH = ΔH2. Hence ΔH1 + ΔH2 = +712. But ΔH1 = -142 kJ mol-1 (Given). ∴ -142 + ΔH2 = +712 or ΔH2 = 854 kJ mol-1. Alternatively, subtract 1st eqn. from 2nd eqn.
Teacher's Note: Hess: overall = step 1 + step 2; second electron gain is endothermic due to repulsion.
Exam Note: Subtract: 712 - (-142) = 854 kJ mol-1.
Question 41. Calculate the enthalpy of vaporisation of water at 25°C and 1 atm pressure. Given that the standard enthalpies of formation of H2O (l) and H2O (g) are -285.8 and -241.8 kJ mol-1 respectively.
Solution. Aim: H2O (l) → H2O (g), ΔH° = ?
ΔH° = ΔHf° (H2O (g)) - ΔHf° (H2O (l)) = -241.8 - (-285.8) kJ mol-1 = 44 kJ mol-1.
Teacher's Note: Products minus reactants; vaporisation is endothermic, so sign positive.
Exam Note: Write ΔH = ΣΔHf(products) - ΣΔHf(reactants).
Question 42. ΔHf° for freon, CHClF2, is -480.0 kJ mol-1. Represent it by thermochemical equation.
Solution. C (s) + ½H2 (g) + ½Cl2 (g) + F2 (g) → CHClF2, ΔHf° = -480.0 kJ mol-1
Teacher's Note: Formation equation: one mole of compound from elements in standard states.
Exam Note: Fractional coefficients allowed; give states.
Question 43. Why is ΔU = 0 for isothermal expansion of an ideal gas?
Solution. For an ideal gas, the internal energy is a function of temperature only. During isothermal expansion, as temperature remains constant, there is no change in internal energy i.e. ΔU = 0.
Teacher's Note: No intermolecular forces in an ideal gas, so U depends on T alone.
Exam Note: Mention U depends only on T.
Question 44. Why standard enthalpy of formation of elementary substances is taken as zero?
Solution. Enthalpy of formation is the heat change involved in the formation of one mole of the substance from its elements. An element formed from itself means no heat change i.e. ΔHf° = 0.
Teacher's Note: Forming an element from itself involves no change at all.
Exam Note: Add: for the standard-state form.
Question 45. The specific heat of a gas is found to be 0.075 calorie at constant volume and its formula weight is 40. What is the atomicity of the gas?
Solution. Molar heat capacity, Cv = 0.075 × 40 calorie = 3 cal mol-1.
Cp = Cv + R = 3 + 2 cal mol-1 = 5 cal mol-1.
∴ γ = Cp/Cv = 5/3 = 1.66. Hence the gas is monoatomic.
Teacher's Note: Cv = 3 cal = 3R/2 and γ = 5/3 identify a monoatomic gas.
Exam Note: Convert specific to molar heat first.
Very Short Answer Questions (1 Mark)
Question 1 (VSA). Under what condition, the heat evolved or absorbed is equal to the internal energy change?
Solution. When the volume remains constant
Teacher's Note: At constant volume w = 0, so qv = ΔU.
Exam Note: One phrase: constant volume.
Question 2 (VSA). Under what condition, an extensive property can become intensive?
Solution. An extensive property becomes intensive when unit amount of the substance is taken e.g. mass and volume are extensive but density (mass per unit volume) and specific volume (volume per unit mass) are intensive.
Teacher's Note: Dividing by amount or mass turns extensive into intensive.
Exam Note: Give density as example.
Question 3 (VSA). Why we usually study enthalpy change and not internal energy change?
Solution. Because most of the processes (reactions) are carried out in open vessels i.e. at constant pressure ( = 1 atm)
Teacher's Note: Open vessel means constant pressure, where qp = ΔH.
Exam Note: Mention constant pressure.
Question 4 (VSA). What are the conditions for expressing standard enthalpy change?
Solution. 25° C (298 K) and one atmosphere pressure.
Teacher's Note: Standard conditions are fixed so values can be compared and combined.
Exam Note: Give both T and P.
Question 5 (VSA). What is the sign of ΔH for endothermic reactions and why?
Solution. ΔH is positive because ΔH = Hp - HR and HR < Hp
Teacher's Note: Endothermic: products hold more enthalpy than reactants.
Exam Note: Write ΔH = Hp - HR.
Question 6 (VSA). What is the relationship between standard enthalpy of formation and the enthalpy of a compound?
Solution. They are equal.
Teacher's Note: Elements have zero reference enthalpy, so ΔHf° is the compound's enthalpy.
Exam Note: One-word answer: equal.
Question 7 (VSA). What is the value of enthalpy of neutralisation of a strong acid by a strong base?
Solution. -57.1 kJ
Teacher's Note: Strong acid and base are fully ionised; only H+ + OH- → H2O contributes.
Exam Note: Include negative sign and kJ.
Question 8 (VSA). Why enthalpy of neutralisation is less if either the acid or the base or both are weak?
Solution. A part of the heat is used up for the dissociation of the weak acid or the weak base or for both if they are weak.
Teacher's Note: Weak electrolytes must ionise first, absorbing heat.
Exam Note: Mention ionisation consumes heat.
Question 9 (VSA). Why enthalpy of neutralisation of HF is greater than 57.1 kJ mol-1?
Solution. This is due to high hydration energy of fluoride ions.
Teacher's Note: Strong hydration of small F- releases extra heat exceeding ionisation cost.
Exam Note: Cite hydration of F-.
Question 10 (VSA). What are specific heat capacity and molar heat capacity for water?
Solution. Specific heat capacity for H2O = 4.18 J K-1 g-1. Molar heat capacity for H2O = 4.18 × 18 = 75.24 J K-1 mol-1.
Teacher's Note: Molar heat capacity = specific heat × molar mass (18 g mol-1).
Exam Note: Show 4.18 × 18 = 75.24.
Question 11 (VSA). What is the law called which states that the total enthalpy change in a chemical reaction is always same at the same temperature?
Solution. Hess's law of constant heat summation
Teacher's Note: Total enthalpy change is independent of the route taken.
Exam Note: Name the law fully.
Question 12 (VSA). What are renewable sources of energy?
Solution. Those which are produced continuously in nature and are inexhaustible e.g. wood, solar energy etc.
Teacher's Note: Renewable sources replenish naturally; coal and petroleum do not.
Exam Note: Give two examples.
Question 13 (VSA). What is SI definition of one Kelvin?
Solution. One Kelvin is 1/273.16 of the triple point temperature of water (viz 273.16 K).
Teacher's Note: The triple point of water fixes the Kelvin scale.
Exam Note: Quote 273.16 K.
C.B.S.E.-P.M.T. (Mains) Special - A. Subjective Questions
Question 1 (Subjective). How can you justify that the work done in the reversible expansion of a gas is the maximum work obtained from the system?
Solution. Work done in the reversible expansion of a gas is given by W = -PextΔV.
For the expansion of the gas, the external pressure (Pext) has to be less than the internal pressure of the gas. However, for reversible expansion, Pext should be infinitesimally smaller than the internal pressure. In other words, for reversible expansion, Pext is the maximum value of external pressure. Hence for a given change of volume (ΔV), PextΔV is the maximum value. Thus, Wrev = Wmax.
Teacher's Note: Reversible path keeps Pext just below Pint at every step, giving the largest possible Pext.
Exam Note: Argue from W = -PextΔV.
Question 2 (Subjective). A system I to state II by two different paths. In the first path ΔH = q. Comment on the value of ΔH and q by the second path. Give reasons for your answer.
Solution. ΔH by second path will be same as in the first path because ΔH is a state function. However, q will not be same by second path because it is not a state function.
Teacher's Note: State functions depend only on end states; heat depends on the path.
Exam Note: Give reason for each of ΔH and q.
Question 4 (Subjective). What is difference between heat and work? For what type of processes the two become equal?
Solution. Difference between heat and work: Refer to page 5/9 (of the source book).
Condition under which q = w: From first law of thermodynamics ΔE = q + w. Thus q = w in magnitude when ΔE = 0. This happens during the isothermal expansion of an ideal gas.
Teacher's Note: Isothermal ideal-gas process has ΔU = 0, so heat absorbed equals work done by the gas.
Exam Note: Use ΔE = q + w with ΔE = 0.
Question 5 (Subjective). Why temperature falls during adiabatic expansion of a real gas but remains constant during adiabatic expansion of an ideal gas?
Solution. In the adiabatic expansion of a real gas, some work is done in overcoming the intermolecular forces of attraction. This is done at the expense of internal energy which therefore falls. As internal energy of a gas is a function of temperature, hence the temperature falls. In case of ideal gases, the forces of attraction between the molecules are negligible. Hence no work is done to overcome the intermolecular forces of attraction. As a result, internal energy remains constant and so is the temperature.
Teacher's Note: Real gases have attractions, so expansion costs internal energy; ideal gases do not.
Exam Note: Mention intermolecular forces for real gas.
Question 6 (Subjective). Show that in the isothermal expansion of the ideal gas, ΔE = 0 and ΔH = 0.
Solution. (i) For one mole of an ideal gas, Cv = dE/dT or dE = Cv dT. For a finite change, ΔE = Cv ΔT. For isothermal process, T = constant so that ΔT = 0. Hence ΔE = 0.
(ii) H = E + PV ∴ ΔH = ΔE + Δ(PV) = ΔE + Δ(RT) = ΔE + RΔT. But ΔE = 0 (proved above) and ΔT = 0 (for isothermal process). ∴ ΔH = 0.
Teacher's Note: For one mole of ideal gas PV = RT, so ΔH depends on ΔT as well.
Exam Note: Use ΔE = CvΔT and PV = RT.
Question 7 (Subjective). In what way internal energy is different from enthalpy? Explain both the terms with suitable examples. (N.C.E.R.T.)
Solution. Internal energy (U) is energy stored in a substance, the change in whose value during a process is equal to the heat evolved or absorbed if the process is carried out at constant volume or is not accompanied by any change in volume i.e. ΔU = qv. Enthalpy (H) is the energy stored in a substance in the form of heat. That is why it is also called heat content of the substance or system. The change in its value during a process is equal to the heat evolved or absorbed if the process is carried out at constant pressure i.e. ΔH = qp.
The two are related as H = U + PV or ΔH = ΔU + ΔngRT.
Thus if Δng = 0, ΔH = ΔU. If Δng is +ve (i.e. np > nr, gaseous) ΔH > ΔU. If Δng = -ve (i.e. np < nr, gaseous) ΔH < ΔU.
For example, for the reaction N2 (g) + O2 (g) → 2NO (g), Δng = 0, therefore, ΔH = ΔU. For the reaction CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), Δng = 1 - 3 = -2 i.e. therefore, ΔH < ΔU. For the reaction CaCO3 (s) → CaO (s) + CO2 (g), Δng = 1 - 0 = 1 i.e. it is +ve. Hence ΔH > ΔU.
Teacher's Note: ΔH and ΔU differ only by ΔngRT, so gaseous moles decide the sign.
Exam Note: Always count only gaseous moles.
Question 8 (Subjective). Why should there be energy crisis when law of conservation of energy holds good?
Solution. No doubt, the law of conservation of energy holds good but the only problem is that the combustion of fuels is a one way process i.e. either the products of combustion are not converted back into the original substances at all or they are converted back at a rate much slower than the rate of their consumption. For example, coal burns to form CO2 but CO2 is converted back into carbon by nature through photosynthesis at a much slower rate.
Teacher's Note: Energy is conserved but usable fuel is consumed faster than nature regenerates it.
Exam Note: Stress rate of consumption versus regeneration.
B. Problems
Question Problem 1. How long will a 2 kW heater take to boil 2 L of water taken at 25°C? Given that the average specific heat of water in the range 25°C - 100°C is 4.184 J K-1 g-1.
Solution. 2 L of water = 2000 cm3 = 2000 g (dH2O = 1 g cm-3)
∴ Heat required to raise its temperature from 25°C to 100°C = m × C × ΔT = (2000 g) × (4.184 J K-1 g-1) × (100 - 25) K = 627600 J.
Heat supplied by 2 kW heater = 2000 J s-1 (∵ 1 W = 1 J s-1)
∴ Time required = 627600 J / 2000 J s-1 = 314 s = 5 min 14 s.
Teacher's Note: Time = heat needed / power; convert kW to J s-1.
Exam Note: Show mcΔT and the unit conversion.
Question Problem 2. Given that the enthalpy of formation of H2O (l) is -68 kcal mol-1. Calculate the enthalpy of formation of OH- (aq) ions.
Solution. For neutralization reaction, we know that H+ + OH- → H2O, ΔH = -13.7 kcal.
Thus ΔHReaction = [ΔHf° (H2O)] - [ΔHf° (H+) + ΔHf° (OH-)]
But ΔHf° (H+) = 0 (by convention)
∴ -13.7 kcal = [-68 kcal] - [0 + ΔHf° (OH-)] or ΔHf° (OH-) = -68 + 13.7 kcal = -54.3 kcal mol-1.
Teacher's Note: Use neutralisation enthalpy with ΔHf°(H+) = 0 as the reference.
Exam Note: State the H+ = 0 convention.
Question Problem 3. Calculate the standard internal energy change for the reaction OF2 (g) + H2O (g) → O2 (g) + 2HF (g) at 298 K, given that the standard enthalpies of formation of OF2 (g), H2O (g) and HF (g) are +20, -250 and -270 kJ mol-1 respectively.
Solution. Step I. Calculation of standard enthalpy of reaction
ΔHr° = ΣΔHf° (Products) - ΣΔHf° (Reactants) = [ΔHf° (O2) + 2ΔHf° (HF)] - [ΔHf° (OF2) + ΔHf° (H2O)] = [0 + 2(-270)] - [+20 + (-250)] kJ mol-1 = -310 kJ mol-1.
Step II. Calculation of standard internal energy change
For the given reaction, Δng = (1 + 2) - (1 + 1) = 1
ΔH° = ΔE° + ΔngRT or ΔE° = ΔH° - ΔngRT = (-310 kJ mol-1) - (1)(8.314 × 10-3 kJ K-1 mol-1)(298 K) = -312.48 kJ mol-1.
Teacher's Note: Convert ΔH to ΔU with Δng = 1 gaseous mole change; R in kJ.
Exam Note: Convert R to kJ before using RT.
Question Problem 4. Calculate the work done when 11.2 g of iron dissolves in hydrochloric acid in (i) a closed vessel (ii) an open beaker at 25°C (Atomic mass of Fe = 56 u).
Solution. Iron reacts with HCl acid to produce H2 gas as Fe (s) + 2HCl (aq) → FeCl2 (aq) + H2 (g). Thus 1 mole of Fe i.e. 56 g Fe produce H2 gas = 1 mole.
∴ 11.2 g Fe will produce H2 gas = (1/56) × 11.2 = 0.2 mole.
(i) If the reaction is carried out in a closed vessel, ΔV = 0 ∴ w = -PextΔV = 0.
(ii) If the reaction is carried out in open beaker (external pressure being 1 atm): Initial volume = 0 (because no gas is present). Final volume occupied by 0.2 mole of H2 at 25°C and 1 atm pressure can be calculated as follows: PV = nRT ∴ V = nRT/P = (0.2 mol × 0.0821 L atm K-1 mol-1 × 298 K)/(1 atm) = 4.89 L.
∴ ΔV = Vfinal - Vinitial = 4.89 L; w = -PextΔV = -1 atm × 4.89 L atm = -4.89 L atm = -4.89 × 101.3 J = -495.4 J.
Teacher's Note: No volume change in a closed vessel gives zero work; in the open beaker gas expands against 1 atm.
Exam Note: Compute moles of H2 first, then V = nRT/P.
Question Problem 5. Calculate ΔU and ΔH in calories if one mole of a monoatomic ideal gas is heated at constant pressure of 1 atm from 25°C to 50°C.
Solution. For monoatomic ideal gas, Cv = (3/2)R. Cp = ΔH/ΔT ∴ ΔH = CpΔT mol-1 (or n CpΔT for n moles) = (5/2) × 1.987 × 25 = 124.2 cal.
Work done, w = -PΔV = -P(V2 - V1) = -(PV2 - PV1) = -(nRT2 - nRT1) = -nR(T2 - T1) = -1 × 1.987 × (323 - 298) cal = -49.7 cal.
ΔE = q + w = 124.2 - 49.7 cal = 74.5 cal.
Teacher's Note: At constant P, q = ΔH = CpΔT; ΔU = q + w with w = -nRΔT.
Exam Note: Check ΔU = CvΔT = 74.5 cal.
Question Problem 6. 10 moles of an ideal gas expand isothermally and reversibly from a pressure of 5 atm to 1 atm at 300 K. What is the largest mass that can be lifted through a height of 1 metre by this expansion?
Solution. wexp = -2.303 nRT log(P1/P2) = -2.303 (10 mol) × (8.314 J K-1 mol-1)(300 K) log(5/1) = -40.15 × 103 J.
If M is the mass that can be lifted through a height of 1 metre, then work done = Mgh
40.15 × 103 J = M × 9.81 m s-2 × 1 m or M = (40.15 × 103 kg m2 s-2)/(9.81 m s-2 × 1 m) = 4092.76 kg.
Teacher's Note: Reversible isothermal work is maximum; equate magnitude of work to Mgh.
Exam Note: Use log10 with the 2.303 factor.
Question Problem 7. The enthalpy change for the reaction Zn (s) + 2H+ (aq) → Zn2+ (aq) + H2 (g) is -154.40 kJ mol-1. The formation of 2 g of hydrogen expands the system by 22.4 litres at 1 atm pressure. What is the internal energy change of the reaction?
Solution. Taking the initial volume as negligible, change in volume during expansion (ΔV) = 22.4 L. External pressure (Pext) = 1 atm.
ΔH = ΔE + PΔV or ΔE = ΔH - PΔV
PΔV = 1 atm × 22.4 L = 22.4 L atm = 22.4 × 101.3 J = 2269 J = 2.27 kJ
∴ ΔE = -154.4 - 2.27 = -156.67 kJ.
Corrected: the book prints PΔV = 2307 J = 2.31 kJ and ΔE = -156.71 kJ, which is a multiplication error (22.4 × 101.3 = 2269 J); the correct value is ΔE ≈ -156.67 kJ.
Teacher's Note: ΔE = ΔH - PΔV; convert L atm to J with 101.3 J per L atm.
Exam Note: Convert L atm to J carefully.
Question Problem 8. The heat of formation of (i) CO2 (g) from its elements is +94.4 kcal (ii) CuO (s) from its elements is 151.8 kcal, and (iii) The heat of reaction between CuO (s) and CO2 (g) is +42.25 kcal. Calculate the heat of formation of CuCO3 (s). (I.S.M. Dhanbad 1987)
Solution. We are given
(i) C (s) + O2 (g) → CO2 (g), ΔH = -94.4 kcal
(ii) Cu (s) + ½O2 (g) → CuO (s), ΔH = -151.8 kcal
(iii) CuO (s) + CO2 (g) → CuCO3 (s), ΔH = -42.25 kcal
We aim at Cu (s) + C (s) + (3/2)O2 (g) → CuCO3 (s), ΔH = ?
Eqn. (i) + Eqn. (ii) + Eqn. (iii) gives the required result. (ΔH = -288.45 kcal)
Teacher's Note: Add the three equations so CO2 and CuO cancel (Hess).
Exam Note: Heats evolved are written as negative ΔH.
Question Problem 9. The molar heat of formation of NH4NO3 is -367.54 kJ and those of N2O (g) and H2O (l) are 81.46 and -285.78 kJ respectively at 25°C and 1 atm pressure. Calculate ΔH for the reaction NH4NO3 (s) → N2O (g) + 2H2O (l) (Bihar C.E.E. 1997)
Solution. ΔH°reaction = ΣΔH°f (Products) - ΔH°f (Reactants) = [ΔH°f (N2O) + 2 × ΔH°f (H2O)] - ΔH°f (NH4NO3) = 81.46 + 2 × (-285.78) - (-367.54) = -122.56 kJ mol-1.
Teacher's Note: Products minus reactants with stoichiometric coefficient 2 on water.
Exam Note: Multiply ΔHf by coefficients.
Question Problem 10. Calculate the heat of combustion of methane at 25°C. The mean bond energies for the C-H, O=O, C=O and O-H are respectively 415, 498, 803 and 463 kJ mol-1. (C.E.E. Bihar 1998)
Solution. CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔH = ?
Bonds: reactants 4 C-H and 2 O=O; products 2 C=O and 4 O-H.
ΔHReaction = ΣB.E. (Reactants) - ΣB.E. (Products) = [4 × B.E. (C-H) + 2 × B.E. (O=O)] - [2 × B.E. (C=O) + 4 × B.E. (O-H)] = (4 × 415 + 2 × 498) - (2 × 803 + 4 × 463) = 2656 - 3458 = -802 kJ mol-1.
Teacher's Note: Bond-energy method: bonds broken minus bonds formed.
Exam Note: Count bonds on both sides.
Question Problem 11. A chemist while studying the properties of gaseous CCl2F2, a chlorofluorocarbon refrigerant took a 1.25 g sample at atmospheric pressure of 1.0 atm from 320 K to 293 K. During cooling, the sample volume decreased from 274 to 248 mL. Calculate ΔH and ΔU for the chlorofluorocarbon for this process. For CCl2F2, Cp = 80.7 J/(mol K). (N.C.E.R.T.)
Solution. ΔH = qp and Cp is heat evolved or absorbed per mole for 1° fall or rise in temperature. Here, fall in temperature = 320 - 293 = 27 K. Molar mass of CCl2F2 = 12 + 2 × 35.5 + 2 × 19 = 121 g mol-1.
∴ Heat evolved from 1.25 g of the sample on being cooled from 320 K to 293 K at constant pressure = (80.7/121) × 1.25 × 27 J = 22.51 J. Further ΔH = ΔU + PΔV = -22.51 J.
PΔV = 1 atm × (248 - 274)/1000 L = -0.026 L atm = -0.026 × 101.325 J = -2.63 J
∴ -22.51 = ΔU - 2.63 J or ΔU = -22.51 + 2.63 = -19.88 J.
Teacher's Note: At constant pressure qp = nCpΔT; then ΔU = ΔH - PΔV.
Exam Note: Use n = mass / molar mass.
Question Problem 12. When 10 g of anhydrous CaCl2 is dissolved in 200 g of water, the temperature of the solution rises by 7.7°C. Calculate the heat of hydration of CaCl2 to CaCl2·6H2O. Given that the heat of dissolution of CaCl2·6H2O is 19.08 kJ mol-1. Assume the specific heat of the solution to be same as that of water i.e. 4.184 J g-1 K-1.
Solution. Step I. Calculation of heat of dissolution of anhydrous CaCl2
Molar mass of CaCl2 = 40 + 2 × 35.5 = 111 g mol-1.
Heat evolved in dissolution of 10 g CaCl2 in 200 g water = m × c × Δt = 200 × 4.184 × 7.7 J.
∴ Heat of dissolution per mole = (200 × 4.184 × 7.7/10) × 111 J = 71.52 kJ i.e. ΔHdiss (CaCl2) = -71.52 kJ mol-1.
Step II. Calculation of heat of hydration. Aim: CaCl2 (s) + 6H2O (l) → CaCl2·6H2O (s)
(i) CaCl2 (s) + aq → CaCl2 (aq), ΔH1 = -71.52 kJ mol-1; (ii) CaCl2·6H2O (s) + aq → CaCl2 (aq), ΔH2 = 19.08 kJ mol-1.
Reaction (i) can be written in two steps as CaCl2 (s) + 6H2O (l) → CaCl2·6H2O (s), ΔH = ΔH3, and CaCl2·6H2O (s) + aq → CaCl2 (aq), ΔH = ΔH4.
∴ ΔH3 + ΔH4 = ΔH1 = -71.52 kJ mol-1. But ΔH4 = ΔH2 = 19.08 kJ mol-1, ∴ ΔH3 + 19.08 = -71.52 or ΔH3 = -90.6 kJ mol-1.
(Note: the book takes the mass of water, 200 g, as the heating mass; using 210 g of solution would give about -75.1 kJ for dissolution.)
Teacher's Note: Hess cycle: hydration = dissolution of anhydrous salt minus dissolution of hydrate.
Exam Note: Heating mass here is 200 g, per book.
I.I.T. (Mains) Special - Problems
Question IIT Problem 1. In a gobar gas plant, gobar gas is obtained by bacterial fermentation of animal refuse. The main combustible gas present in the gobar gas is found to be methane (80% by weight) whose heat of combustion is 809 kJ mol-1. How much gobar gas would have to produced per day for a village of 100 families if the average consumption of a family is 20,000 kJ per day to meet all its energy requirements.
Solution. Total energy requirement for 100 families per day = 20,000 × 100 kJ = 2 × 106 kJ.
Methane (CH4) undergoes combustion as follows: CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔH = -809 kJ mol-1.
For 809 kJ of energy, CH4 required = 16 g (molar mass of CH4 = 16 g mol-1).
For 2 × 106 kJ of energy, CH4 required = (16/809) × 2 × 106 g = 39.56 kg.
As gobar gas contains 80% by weight of methane, therefore gobar gas required = (100/80) × 39.56 kg = 49.45 kg.
Teacher's Note: Find CH4 mass from energy, then divide by 0.80 since gas is 80% methane.
Exam Note: Do not forget the 80% purity step.
Question IIT Problem 2. In an oven, due to insufficient supply of oxygen, 60% of the carbon is converted to carbon-dioxide whereas the remaining 40% is converted into carbon monoxide. If the heat of combustion of carbon to CO2 is 394 kJ mol-1 while that of its oxidation to CO is 111 kJ mol-1, calculate the total heat produced in the oven by burning 10 kg of coal containing 80% carbon by weight. Also calculate the efficiency of the oven.
Solution. The reactions taking place in the oven are C (s) + O2 (g) → CO2 (g) + 394 kJ mol-1 and C (s) + ½O2 (g) → CO (g) + 111 kJ mol-1.
Carbon present in 10 kg coal = (80/100) × 10 kg = 8 kg. Carbon converted to CO2 = (60/100) × 8 kg = 4.8 kg. Carbon converted to CO = (40/100) × 8 kg = 3.2 kg.
0.012 kg of carbon on combustion to CO2 produce heat = 394 kJ ∴ 4.8 kg produce heat = (394/0.012) × 4.8 = 157600 kJ.
0.012 kg of carbon on oxidation to CO produce heat = 111 kJ ∴ 3.2 kg produce heat = (111/0.012) × 3.2 = 29600 kJ.
∴ Total heat produced = 157600 + 29600 = 1,87,200 kJ.
If oven were 100% efficient, all carbon would have been converted to CO2. Heat produced from 8 kg carbon would have been = (394/0.012) × 8 = 262,667 kJ.
∴ % efficiency = (187,200/262,667) × 100 = 71.3%.
Teacher's Note: Efficiency compares actual heat with heat if all carbon burned completely to CO2.
Exam Note: Use 12 g mol-1 (0.012 kg) for carbon.
Question IIT Problem 3. Calculate the work of expansion when 100 g of water is electrolysed at a constant pressure of 1 atm and temperature of 25°C.
Solution. Electrolysis of water takes place as 2H2O (l) → 2H2 (g) + O2 (g). Thus 2 moles of H2O i.e. 2 × 18 = 36 g of H2O on electrolysis produce 2 moles of H2 gas and one mole of O2 gas i.e. total 3 moles of the gases.
∴ 100 g of water will produce gases = (3/36) × 100 = 8.33 moles.
Volume occupied by 8.33 moles of gases at 25°C and 1 atm pressure is given by V = nRT/P = (8.33 mol)(0.0821 L atm K-1 mol-1)(298 K)/(1 atm) = 203.8 L.
Taking the volume of liquid water as negligible (being 100 mL = 0.1 L), ΔV = 203.8 L.
∴ W = -PextΔV = -1 atm × 203.8 L = -203.8 L atm = -203.8 × 101.3 J = -20.6 kJ.
Teacher's Note: Only the gas volume formed counts; liquid volume is negligible.
Exam Note: Work done by system is negative.
Question IIT Problem 4. Work done in the expansion of an ideal gas from 4 dm3 to 6 dm3 against a constant external pressure of 2.5 atm was used to heat up 1 mole of water at 20°C. What will be the final temperature of water. Given that the specific heat of water = 4.184 J g-1 K-1.
Solution. As work is being done against constant external pressure, the process is irreversible. Hence w = -PextΔV = -2.5 atm × (6 - 4) dm3 = -5.0 L atm = -5.0 × 101.3 J (1 dm3 = 1 L; 1 L atm = 101.3 J) = -506.5 J.
For isothermal expansion of ideal gas, ΔE = 0 so that q = -w = 506.5 J.
This heat is used up to heat 1 mole of water. Applying the relation q = m × c × ΔT: 506.5 = 18 × 4.184 × ΔT or ΔT = 6.725. ∴ Final temperature = 20°C + 6.725 = 26.725°C.
Teacher's Note: Work done by gas is absorbed as heat by water (isothermal ideal gas: q = -w).
Exam Note: 1 mole of water = 18 g.
Question IIT Problem 5. An intimate mixture of ferric oxide, Fe2O3, and aluminium, Al, is used in solid fuel rockets. Calculate the fuel value per gram and fuel value per cc, of the mixture. Heats of formation and densities are as follows: ΔHf (Al2O3) = 399 kcal/mol; ΔHf (Fe2O3) = 199 kcal/mol; Density of Fe2O3 = 5.2 g/cc; Density of Al = 2.7 g/cc. (I.I.T. 1988)
Solution. We aim at Fe2O3 + 2Al → 2Fe + Al2O3, ΔH = ?
ΔHreaction = [2 × ΔHf (Fe) + ΔHf (Al2O3)] - [ΔHf (Fe2O3) + 2 × ΔHf (Al)] = (0 + 399) - (199 + 0) = 200 kcal (heats of formation taken as heat evolved, as given).
This is the heat change that takes place when 1 mole of Fe2O3 and 2 moles of Al combine i.e. (2 × 56 + 3 × 16) + 2 × 27 g = 214 g of the mixture. Hence heat change per gram = 200/214 = 0.9346 kcal.
Further 160 g Fe2O3 = 160/5.2 = 30.77 cc and 54 g Al = 54/2.7 = 20 cc. Total volume of the mixture = 50.77 cc.
∴ Heat change per cc = 200/50.77 = 3.939 kcal.
Teacher's Note: Fuel value = heat evolved divided by mass (or volume) of the reacting mixture.
Exam Note: Add volumes of both reactants.
Question IIT Problem 6. An athlete is given 100 g of glucose (C6H12O6) of energy equivalent to 1560 kJ. He utilizes 50 percent of this gained energy in the event. In order to avoid storage of energy in the body, calculate the weight of water he would need to perspire. The enthalpy of evaporation of water is 44 kJ/mol. (I.I.T. 1989)
Solution. Energy left unutilized = 1560/2 kJ = 780 kJ.
For losing 44 kJ of energy, water to be evaporated = 1 mole = 18 g.
∴ For losing 780 kJ of energy, water to be evaporated = (18/44) × 780 g = 319 g.
Teacher's Note: Unused 50% energy is removed by evaporating water at 44 kJ per 18 g.
Exam Note: Remember half the energy remains.
Question IIT Problem 7. The standard enthalpy of combustion at 25°C of hydrogen, cyclohexene (C6H10) and cyclohexane (C6H12) are -241, -3800 and -3920 kJ/mol respectively. Calculate the heat of hydrogenation of cyclohexene. (I.I.T. 1989, I.S.M. Dhanbad 1992; Bihar C.E.E. 2003)
Solution. We are given
(i) H2 + ½O2 → H2O, ΔH = -241 kJ
(ii) C6H10 + (17/2)O2 → 6CO2 + 5H2O, ΔH = -3800 kJ
(iii) C6H12 + 9O2 → 6CO2 + 6H2O, ΔH = -3920 kJ
We aim at C6H10 + H2 → C6H12, ΔH = ?
Eqn. (i) + Eqn. (ii) - Eqn. (iii) gives the required result: ΔH = -241 - 3800 + 3920 = -121 kJ. [Ans. -121 kJ] (the scanned answer line is faint; value verified by the arithmetic above)
Teacher's Note: Hess: hydrogenation = combustion of reactants minus combustion of product.
Exam Note: Check signs when subtracting equation (iii).
Question IIT Problem 8. Calculate the standard heat of formation of carbon disulphide (l). Given that the standard heats of combustion of carbon (s), sulphur (s) and carbon disulphide (l) are -393.3, -293.72 and -1108.76 kJ mol-1 respectively. (Roorkee 1989)
Solution. We are given
(i) C (s) + O2 (g) → CO2 (g), ΔH = -393.3 kJ
(ii) S (s) + O2 (g) → SO2 (g), ΔH = -293.72 kJ
(iii) CS2 (l) + 3O2 (g) → CO2 (g) + 2SO2 (g), ΔH = -1108.76 kJ
We aim at C (s) + 2S (s) → CS2 (l), ΔH = ?
Eqn. (i) + 2 × Eqn. (ii) - Eqn. (iii) gives the required result. [Ans. 128.02 kJ]
Check: -393.3 + 2(-293.72) + 1108.76 = 128.02 kJ mol-1.
Teacher's Note: Formation of CS2 from combustion data: combine C and 2S combustion, subtract CS2 combustion.
Exam Note: Multiply sulphur equation by 2.
Question IIT Problem 9. A gas mixture of 3.67 litres of ethylene and methane on complete combustion at 25°C produces 6.11 litres of CO2. Find out the amount of heat evolved on burning one litre of the mixture. The heats of combustion of ethylene and methane are -1423 and -891 kJ mol-1 at 25°C. (I.I.T. 1991)
Solution. Combustion reaction of ethylene and methane are C2H4 + 3O2 → 2CO2 + 2H2O, ΔH = -1423 kJ; CH4 + 2O2 → CO2 + 2H2O, ΔH = -891 kJ.
Suppose volume of C2H4 in the mixture = x litres. Then volume of CH4 in the mixture = (3.67 - x) litres.
1 litre of C2H4 gives CO2 = 2 litres ∴ x litres give 2x litres. 1 litre of CH4 gives 1 litre CO2 ∴ (3.67 - x) litres give (3.67 - x) litres.
Total CO2 produced = 2x + (3.67 - x) = 3.67 + x = 6.11, or x = 2.44.
∴ 1 litre of the mixture will contain C2H4 = 2.44/3.67 = 0.66 litre and CH4 = 1 - 0.66 = 0.34 litre.
22.4 litres of C2H4 give heat = 1423 kJ ∴ 0.66 litre will give heat = (1423/22.4) × 0.66 kJ = 41.93 kJ. 22.4 litres of CH4 give heat = 891 kJ ∴ 0.34 litre will give heat = (891/22.4) × 0.34 kJ = 13.52 kJ.
∴ Total heat produced = 41.93 + 13.52 = 55.45 kJ.
Teacher's Note: Volumes of ideal gases scale with moles; solve x from total CO2 volume.
Exam Note: Use 22.4 L at 273 K only as the book does.
| Compound | H2 (g) | CH4 (g) | C2H6 (g) | C (graphite) |
|---|---|---|---|---|
| ΔH° (kJ/mol) | -285.8 | -890.0 | -1560.0 | -393.5 |
Solution. We are given
(i) H2 (g) + ½O2 (g) → H2O (l), ΔH = -285.8 kJ
(ii) CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔH = -890 kJ
(iii) C2H6 (g) + (7/2)O2 (g) → 2CO2 (g) + 3H2O (l), ΔH = -1560 kJ
(iv) C (s) + O2 (g) → CO2 (g), ΔH = -393.5 kJ
(v) 3C (s) + 4H2 (g) → C3H8 (g), ΔH = -103.8 kJ
We aim at C3H8 (g) + H2 (g) → C2H6 (g) + CH4 (g), ΔH = ?
5 × Eqn. (i) - Eqn. (v) - Eqn. (ii) - Eqn. (iii) + 3 × Eqn. (iv) gives the required result. [Ans. -55.7 kJ mol-1]
Teacher's Note: Convert combustion data to a formation-based Hess cycle with the given ΔHf of propane.
Exam Note: Check that all species cancel.
Question IIT Problem 11. In order to get maximum calorific output, a burner should have an optimum fuel value to oxygen ratio which corresponds to 3 times as much oxygen as is required theoretically for complete combustion of the fuel. A burner which has been adjusted for methane as fuel (with x litre/hour of CH4 and 6x litre/hour of O2) is to be readjusted for butane, C4H10. In order to get the same calorific output, what should be the rate of supply of butane and oxygen? Assume that the losses due to incomplete combustion etc are the same for both the fuels and that the gases behave ideally. Heats of combustion: CH4 = 809 kJ/mol, C4H10 = 2878 kJ/mol. (I.I.T. 1993)
Solution. CH4 + 2O2 → CO2 + 2H2O + 809 kJ and C4H10 + (13/2)O2 → 4CO2 + 5H2O + 2878 kJ.
Corrected: The book compares calorific values per gram (CH4 = 809/16 = 50.56 kJ g-1, C4H10 = 2878/58 = 49.62 kJ g-1) and gets 1.0189x litres of butane and 19.869x litres of O2; this is wrong because litres of an ideal gas are proportional to moles, not to grams. Correct working: equal heat output needs (volume of C4H10) × 2878 = x × 809, so C4H10 = 809x/2878 = 0.281x litres/hour.
Theoretical O2 = 6.5 × 0.281x = 1.827x; actual O2 = 3 × 1.827x = 5.48x litres/hour.
Hence C4H10 should be supplied at 0.281x litres/hour and O2 at 5.48x litres/hour.
Teacher's Note: Equal heat per hour needs equal moles-times-ΔH; gas volumes scale with moles, not mass.
Exam Note: Take O2 as 3 times the stoichiometric need.
Question IIT Problem 12. The enthalpy change involved in the oxidation of glucose is -2880 kJ mol-1. Twentyfive percent of this energy is available for muscular work. If 100 kJ of muscular work is needed to walk one kilometer, what is the maximum distance that a person will be able to walk after eating 120 g of glucose? (I.I.T. 1997)
Solution. Energy available for muscular work = (25/100) × 2880 kJ mol-1 = 720 kJ mol-1.
Molar mass of glucose = 180 g mol-1. ∴ Energy available for muscular work from 120 g glucose = (720/180) × 120 = 480 kJ.
In 100 kJ of muscular work, distance walked = 1 km. ∴ In 480 kJ of muscular work, distance walked = (1/100) × 480 = 4.8 km.
Teacher's Note: Only 25% of the oxidation enthalpy becomes work; scale by mass fraction of a mole.
Exam Note: Show moles of glucose = 120/180.
Question IIT Problem 13. From the following data, calculate the enthalpy change for the combustion of cyclopropane at 298 K. The enthalpy of formation of CO2 (g), H2O (l) and propene (g) are -393.5, -285.8 and 20.42 kJ mol-1 respectively. The enthalpy of isomerisation of cyclopropane to propene is -33.0 kJ mol-1. (I.I.T. 1998)
Solution. We are given
(i) C (s) + O2 (g) → CO2 (g), ΔH = -393.5 kJ mol-1
(ii) H2 (g) + ½O2 (g) → H2O (l), ΔH = -285.8 kJ mol-1
(iii) 3C (s) + 3H2 (g) → C3H6 (g), ΔH = +20.42 kJ mol-1
(iv) cyclopropane (CH2)3 → C3H6 (g) (propene), ΔH = -33.0 kJ mol-1
We aim at (CH2)3 + (9/2)O2 → 3CO2 (g) + 3H2O (l).
Operating (iv) - (iii) + 3 × (i) + 3 × (ii), we get the required equation and ΔH = -33 - 20.42 + 3(-393.5) + 3(-285.8) = -2091.32 kJ mol-1.
Teacher's Note: Cyclopropane formation enthalpy is 20.42 + 33 = 53.42 kJ; combustion follows from products minus that.
Exam Note: Isomerisation is exothermic, so cyclopropane is less stable.
Question IIT Problem 14. Estimate the average S-F bond energy in SF6. The standard heat of formation values of SF6 (g), S (g) and F (g) are -1100, 275 and 80 kJ mol-1 respectively. (I.I.T. 1999)
Solution. We are given
(i) (1/8)S8 (s) + 3F2 (g) → SF6 (g), ΔH = -1100 kJ
(ii) (1/8)S8 (s) → S (g), ΔH = 275 kJ
(iii) ½F2 (g) → F (g), ΔH = 80 kJ
We aim at (1/6)[SF6 (g) → S (g) + 6F (g)].
Eqn. (ii) + 6 × (iii) - (i): SF6 (g) → S (g) + 6F (g), ΔH = 275 + 6 × 80 - (-1100) = 1855 kJ.
∴ Average S-F bond energy = 1855/6 = 309.17 kJ mol-1 (book prints 309.16).
Teacher's Note: Atomisation enthalpy of SF6 divided by the six equivalent S-F bonds.
Exam Note: Include atomisation of S and F in the cycle.
Multiple Choice Questions
Question 1 (MCQ). Internal energy of a substance/system is
(a) State function
(b) Path function
(c) Neither state function nor path function
(d) Both state function as well as path function
Solution. Answer: (a). Internal energy depends only on the state of the system.
Teacher's Note: U is fixed by the state, not by how it was reached.
Exam Note: Define state function.
Question 2 (MCQ). The relationship between enthalpy and internal energy change is
(a) ΔE = ΔH + PΔV
(b) ΔH = ΔE + PΔV
(c) ΔH = -ΔE - PΔV
(d) PΔV = ΔE + ΔH
Solution. Answer: (b). From H = E + PV at constant pressure, ΔH = ΔE + PΔV.
Teacher's Note: Differentiate H = E + PV at constant P.
Exam Note: Write H = E + PV first.
Question 3 (MCQ). When a reaction is carried out in a closed vessel
(a) qp < qv
(b) qp > qv
(c) qp = qv
(d) qv = 0
Solution. Answer: (c). Key answer as printed in the book.
Teacher's Note: In a closed vessel volume is constant so heat measured is qv.
Exam Note: Link closed vessel to constant volume.
Question 4 (MCQ). The bond energies of H-H and Cl-Cl are 430 kJ mol-1 and 242 kJ mol-1 respectively. ΔHf for HCl is 91 kJ mol-1. The bond energy of HCl will be
(a) 427 kJ
(b) 245 kJ
(c) 285 kJ
(d) 766 kJ
Solution. Answer: (b). Taking ΔHf = +91 as printed: ½(430) + ½(242) - E(H-Cl) = 91, so E(H-Cl) = 336 - 91 = 245 kJ mol-1.
Teacher's Note: Use ΔHf = ½E(H-H) + ½E(Cl-Cl) - E(H-Cl) for HCl.
Exam Note: Take half of each diatomic bond energy.
Question 5 (MCQ). The relationship between free energy change (ΔG) and entropy change (ΔS) at constant temperature (T) is
(a) ΔG = ΔH + TΔS
(b) ΔH = ΔG + TΔS
(c) TΔS = ΔG + ΔH
(d) ΔG = -ΔH - TΔS
Solution. Answer: (b). ΔG = ΔH - TΔS, so ΔH = ΔG + TΔS.
Teacher's Note: Rearrange the Gibbs equation ΔG = ΔH - TΔS.
Exam Note: Recall ΔG = ΔH - TΔS.
Question 6 (MCQ). If heat of dissolution of anhydrous CuSO4 and CuSO4·5H2O are -15.89 kcal and 2.80 kcal respectively, then the heat of hydration of CuSO4 to form CuSO4·5H2O is
(a) -13.09 kcal
(b) -18.69 kcal
(c) +13.09 kcal
(d) +18.69 kcal
Solution. Answer: (b). ΔHhyd = -15.89 - 2.80 = -18.69 kcal.
Teacher's Note: Hess cycle: hydration = dissolution (anhydrous) - dissolution (hydrate).
Exam Note: Subtract the two dissolution values.
Question 7 (MCQ). The difference between heats of reaction at constant pressure and at constant volume for the reaction 2C6H6 (l) + 15O2 (g) → 12CO2 (g) + 6H2O (l) at 25°C in kJ is
(a) -7.43
(b) +3.72
(c) -3.72
(d) +7.43
Solution. Answer: (a). Δng = 12 - 15 = -3. ΔH - ΔU = ΔngRT = -3 × 8.314 × 10-3 × 298 = -7.43 kJ.
Teacher's Note: Only gaseous moles count; liquids are ignored in Δng.
Exam Note: Use R = 8.314 J, convert to kJ.
Question 8 (MCQ). Which of the following equations correctly represents the standard heat of formation (ΔHf°) of methane?
(a) C (diamond) + 2H2 (g) → CH4 (g)
(b) C (graphite) + 2H2 (g) → CH4 (l)
(c) C (graphite) + 2H2 (g) → CH4 (g)
(d) C (graphite) + 4H → CH4 (g)
Solution. Answer: (c). Formation uses elements in their standard states: graphite and H2 gas, giving CH4 (g).
Teacher's Note: Elements must be in standard states; diamond and atomic H do not qualify.
Exam Note: State graphite and H2 (g).
Question 9 (MCQ). The enthalpy of vaporization of liquid water using the data H2 (g) + ½O2 (g) → H2O (l), ΔH = -285.77 kJ/mole and H2 (g) + ½O2 (g) → H2O (g), ΔH = -241.84 kJ/mole is
(a) +43.93 kJ/mol
(b) -43.93 kJ/mol
(c) +527.61 kJ/mol
(d) -527.61 kJ/mol
Solution. Answer: (a). ΔHvap = -241.84 - (-285.77) = +43.93 kJ/mol.
Teacher's Note: Vaporisation is endothermic: subtract liquid formation from vapour formation.
Exam Note: Positive sign for vaporisation.
Question 10 (MCQ). Under the same conditions how many ml of 1 M KOH and 0.5 M H2SO4 solutions, respectively, when mixed to form a total volume of 100 ml, produces the highest rise in temperature?
(a) 67, 33
(b) 33, 67
(c) 40, 60
(d) 50, 50
Solution. Answer: (d). 1 M KOH = 1 N and 0.5 M H2SO4 = 1 N, so equal volumes (50 mL each) give exact neutralisation and maximum heat.
Teacher's Note: Maximum temperature rise occurs when equivalents of acid and base are equal.
Exam Note: Convert molarity to normality.
Question 11 (MCQ). The heat of neutralization of aqueous hydrochloric acid by NaOH is x kcal/mol of HCl. Calculate the heat of neutralization per mol of aqueous acetic acid.
(a) 0.5 x kcal
(b) x kcal
(c) 2x kcal
(d) cannot be calculated from the given data
Solution. Answer: (d). Acetic acid is weak; its ionisation enthalpy is needed and is not given.
Teacher's Note: Weak acid neutralisation heat includes ionisation enthalpy, absent from the data.
Exam Note: Mention weak acid ionisation.
Question 12 (MCQ). The enthalpy change for a given reaction at 298 K is -x cal/mol. If the reaction occurs spontaneously at 298 K, the entropy change at that temperature
(a) can be negative but numerically larger than x/298 cal K-1
(b) can be negative, but numerically smaller than x/298 cal K-1
(c) cannot be negative
(d) cannot be positive
Solution. Answer: (b). Spontaneous: ΔG = -x - 298ΔS < 0, so ΔS > -x/298. ΔS may be negative but its magnitude must be less than x/298.
Teacher's Note: Set ΔG < 0 with ΔH = -x and solve for the allowed ΔS.
Exam Note: Write ΔG = ΔH - TΔS < 0.
Question 13 (MCQ). ΔH°f of CO2 (g), CO (g), N2O (g) and NO2 (g) in kJ/mole are respectively -393, -110, 81 and 34. Calculate the ΔH in kJ of the following reaction: 2NO2 (g) + 3CO (g) → N2O (g) + 3CO2 (g)
(a) 836
(b) 1460
(c) -836
(d) -1460
Solution. Answer: (c). ΔH = [81 + 3(-393)] - [2(34) + 3(-110)] = -1098 - (-262) = -836 kJ.
Teacher's Note: Products minus reactants, weighted by coefficients.
Exam Note: Show ΣΔHf products minus reactants.
Question 14 (MCQ). Given that C + O2 → CO2, ΔH° = -x kJ; 2CO + O2 → 2CO2, ΔH° = -y kJ. The enthalpy of formation of carbon monoxide will be
(a) y - 2x
(b) (2x - y)/2
(c) (y - 2x)/2
(d) 2x - y
Solution. Answer: (c). C + ½O2 → CO: ΔH = -x - (-y/2) = (y - 2x)/2.
Teacher's Note: Subtract half of the second equation from the first (Hess).
Exam Note: Halve the CO oxidation equation.
Question 15 (MCQ). Standard molar enthalpy of formation of CO2 is equal to
(a) zero
(b) the standard molar enthalpy of combustion of gaseous carbon
(c) the sum of standard molar enthalpies of formation of CO and O2
(d) the standard molar enthalpy of combustion of carbon (graphite)
Solution. Answer: (d). C (graphite) + O2 → CO2 is both the formation of CO2 and combustion of graphite.
Teacher's Note: Same equation serves as formation of CO2 and combustion of graphite.
Exam Note: Name graphite, the standard state.
Question 16 (MCQ). Molar heat capacity of water in equilibrium with ice at constant pressure is
(a) zero
(b) infinity
(c) 40.45 kJ K-1 mol-1
(d) 75.48 J K-1 mol-1
Solution. Answer: (b). Heat added at equilibrium melts ice without changing temperature, so C = q/ΔT is infinite.
Teacher's Note: During a phase change heat flows with no temperature change.
Exam Note: C = q/ΔT with ΔT = 0.
Question 17 (MCQ). In the reaction: S + 3/2 O2 → SO3 + 2x kcal and SO2 + ½O2 → SO3 + y kcal, the heat of formation of SO2 is
(a) (x + y)
(b) (x - y)
(c) (2x + y)
(d) (2x - y)
Solution. Answer: (d). Subtract the second equation from the first: S + O2 → SO2 + (2x - y) kcal.
Teacher's Note: Heat of formation of SO2 = heat for SO3 route minus SO2 to SO3 step.
Exam Note: Subtract the equations.
Question 18 (MCQ). At constant T and P, which one of the following statements is correct for the reaction CO (g) + ½O2 (g) → CO2 (g)?
(a) ΔH = ΔE
(b) ΔH < ΔE
(c) ΔH > ΔE
(d) ΔH is independent of the physical state of the reactants.
Solution. Answer: (b). Δng = 1 - 1.5 = -½, so ΔH = ΔE - ½RT < ΔE.
Teacher's Note: Negative Δng makes ΔH smaller than ΔE.
Exam Note: Compute Δng = -½.
Question 19 (MCQ). Heat of neutralization of strong acid against strong base is constant and equals to
(a) 13.7 kcal
(b) 57 kJ
(c) 5.7 × 104 J
(d) All of the above.
Solution. Answer: (d). 13.7 kcal ≈ 57 kJ = 5.7 × 104 J per mole of water formed.
Teacher's Note: All three are the same quantity in different units.
Exam Note: Convert kcal to kJ to J.
Question 20 (MCQ). The following is (are) endothermic reaction (s)
(a) Combustion of methane
(b) Decomposition of water
(c) Dehydrogenation of ethane to ethylene
(d) Conversion of graphite to diamond.
Solution. Answer: (b, c, d). Combustion is exothermic; decomposition of water, dehydrogenation of ethane and graphite → diamond all absorb heat.
Teacher's Note: Bond breaking dominates in decomposition and dehydrogenation.
Exam Note: Combustion is always exothermic.
Question 21 (MCQ). If ΔE is the heat of reaction for C2H5OH (l) + 3O2 (g) → 2CO2 (g) + 3H2O (l) at constant volume, the ΔH (heat of reaction at constant pressure) at constant temperature is
(a) ΔH = ΔE - RT
(b) ΔH = ΔE - 2RT
(c) ΔH = ΔE + 2RT
(d) ΔH = ΔE + RT
Solution. Answer: (a). Δng = 2 - 3 = -1, so ΔH = ΔE + ΔngRT = ΔE - RT.
Teacher's Note: Count only gaseous moles: 2 product vs 3 reactant.
Exam Note: Apply ΔH = ΔE + ΔngRT.
Question 22 (MCQ). Internal energy does not include
(a) nuclear energy
(b) vibrational energy
(c) rotational energy
(d) energy of gravitational pull
Solution. Answer: (d). Internal energy includes nuclear, vibrational, rotational and translational energy, but not external fields such as gravity.
Teacher's Note: Internal energy is the system's own energy, excluding bulk position effects.
Exam Note: Name energy of gravitational pull.
Question 23 (MCQ). Which of the following reactions is endothermic?
(a) N2 + O2 → 2NO
(b) H2 + Cl2 → 2HCl
(c) H2SO4 + 2NaOH → Na2SO4 + 2H2O
(d) None of these.
Solution. Answer: (a). Formation of NO from N2 and O2 absorbs heat (ΔHf of NO is positive).
Teacher's Note: Positive ΔHf of NO signals endothermic formation.
Exam Note: HCl formation and neutralisation are exothermic.
Question 24 (MCQ). Amount of heat required to change 1 g ice at 0°C to 1 g steam at 100°C is
(a) 616 cal
(b) 12 kcal
(c) 717 cal
(d) none of these.
Solution. Answer: (c). 80 cal (melting) + 100 cal (heating 0 to 100°C) + 537 cal (vaporisation) = 717 cal.
Teacher's Note: Add fusion, heating and vaporisation heats for 1 g.
Exam Note: Add three heat steps.
Question 25 (MCQ). The ΔHf° for CO2 (g), CO (g) and H2O (g) are -393.5, -110.5 and -241.8 kJ/mol respectively. The standard enthalpy change (in kJ) for the reaction CO2 (g) + H2 (g) → CO (g) + H2O (g) is
(a) 524.1
(b) 41.2
(c) -262.5
(d) -41.2
Solution. Answer: (b). ΔH = (-110.5 - 241.8) - (-393.5 + 0) = 41.2 kJ.
Teacher's Note: Products minus reactants; H2 has zero ΔHf.
Exam Note: Include zero for H2.
Question 26 (MCQ). In thermodynamics, a process is called reversible when
(a) surroundings and system change into each other
(b) there is no boundary between system and surroundings
(c) the surroundings are always in equilibrium with the system
(d) the system changes into the surroundings spontaneously
Solution. Answer: (c). A reversible process proceeds through successive equilibrium states with the surroundings.
Teacher's Note: Infinitesimal driving force keeps system and surroundings in equilibrium.
Exam Note: Say: always in equilibrium.
Question 27 (MCQ). Which one of the following statements is false?
(a) Work is a state function
(b) Temperature is a state function
(c) Change in the state is completely defined when the initial and final states are specified
(d) Work appears at the boundary of the system.
Solution. Answer: (a). Work is a path function, not a state function; so (a) is false.
Teacher's Note: Heat and work depend on path, so they are not state functions.
Exam Note: Work and heat are path functions.
Question 28 (MCQ). Change in enthalpy for the reaction 2H2O2 (l) → 2H2O (l) + O2 (g) if heat of formation of H2O2 (l) and H2O (l) are -188 kJ mol-1 and -286 kJ mol-1 respectively, is
(a) -196 kJ mol-1
(b) +196 kJ mol-1
(c) +948 kJ mol-1
(d) -948 kJ mol-1
Solution. Answer: (a). ΔH = 2(-286) - 2(-188) = -572 + 376 = -196 kJ.
Teacher's Note: Coefficients 2 multiply both formation enthalpies; O2 is zero.
Exam Note: Multiply by stoichiometric 2.
Question 29 (MCQ). Enthalpy of CH4 + ½O2 → CH3OH is negative. If enthalpy of combustion of CH4 and CH3OH are x and y respectively, then which relation is correct?
(a) x > y
(b) x < y
(c) x = y
(d) x ≥ y
Solution. Answer: (b). ΔH = x - y < 0 (combustion enthalpies being negative numbers), so x < y.
Teacher's Note: Hess: ΔH(reaction) = ΔHc(CH4) - ΔHc(CH3OH).
Exam Note: Write ΔH = x - y < 0.
Question 30 (MCQ). If in order to decompose 9 g water, 142.5 kJ heat is required. Hence the enthalpy of formation of water is
(a) +285 kJ
(b) -285 kJ
(c) +142.6 kJ
(d) -142.5 kJ
Solution. Answer: (b). 18 g water needs 2 × 142.5 = 285 kJ for decomposition, so formation = -285 kJ mol-1.
Teacher's Note: Formation is the reverse of decomposition, per mole (18 g).
Exam Note: Double for one mole.
Question 31 (MCQ). The heats of combustion of graphite and carbon monoxide respectively are -393.5 kJ mol-1 and -283 kJ mol-1. Therefore the heat of formation of carbon monoxide in kJ mol-1 is
(a) +172.5
(b) -110.5
(c) -1070
(d) -676.5
(e) +110.5
Solution. Answer: (b). C + ½O2 → CO: ΔH = -393.5 - (-283) = -110.5 kJ mol-1.
Teacher's Note: Subtract CO combustion from graphite combustion.
Exam Note: Hess subtraction.
Question 32 (MCQ). Compounds with high heat of formation are less stable because
(a) it is difficult to synthesize them
(b) energy rich state leads to instability
(c) high temperature is required to synthesize them
(d) molecules of such compounds are distorted
Solution. Answer: (b). A high (positive) heat of formation means the compound is energy rich, hence unstable.
Teacher's Note: High energy content gives a tendency to decompose.
Exam Note: State: energy rich means unstable.
Question 33 (MCQ). The heat required to raise the temperature of a body by 1 K is called
(a) specific heat
(b) thermal capacity
(c) water equivalent
(d) molar heat capacity
Solution. Answer: (b). Heat needed to raise a body's temperature by 1 K is its thermal (heat) capacity.
Teacher's Note: Specific heat is per gram; thermal capacity is for the whole body.
Exam Note: Distinguish from specific heat.
Question 34 (MCQ). In a reaction involving only solids and liquids, which of the following is true?
(a) ΔH < ΔE
(b) ΔH = ΔE
(c) ΔH > ΔE
(d) ΔH = ΔE + RTΔn
Solution. Answer: (b). Δng = 0 (no gases), so ΔH = ΔE.
Teacher's Note: PΔV is negligible for condensed phases.
Exam Note: No gaseous moles means Δng = 0.
Question 35 (MCQ). C (diamond) → C (graphite), ΔH = -ve. This shows that
(a) Graphite is more stable than diamond
(b) Diamond is more stable than graphite
(c) Both are equally stable
(d) Stability cannot be predicted.
Solution. Answer: (a). Energy is released going to graphite, so graphite is lower in energy and more stable.
Teacher's Note: Exothermic conversion ends at the lower-energy, more stable form.
Exam Note: Negative ΔH means product more stable.
Question 36 (MCQ). In a closed insulated container, a liquid is stirred with a paddle to increase the temperature. Which of the following is true?
(a) ΔE = W ≠ 0, q = 0
(b) ΔE = W = q ≠ 0
(c) ΔE = 0, W = q ≠ 0
(d) W = 0, ΔE = q ≠ 0
Solution. Answer: (a). Insulated so q = 0; paddle work W is done on the liquid, so ΔE = W ≠ 0.
Teacher's Note: Adiabatic container fixes q = 0; stirring supplies work that raises internal energy.
Exam Note: Insulated means q = 0.
Question 37 (MCQ). An adiabatic expansion of an ideal gas always has
(a) decrease in temperature
(b) q = 0
(c) W = 0
(d) ΔH = 0
Solution. Answer: (b). Adiabatic means no heat exchange, so q = 0.
Teacher's Note: Adiabatic is defined by q = 0 (temperature falls for expansion, but q = 0 is the definition).
Exam Note: Define adiabatic: q = 0.
Question 38 (MCQ). The amount of energy released when 20 ml of 0.5 M NaOH are mixed with 100 ml of 0.1 M HCl is x kJ. The heat of neutralization (in kJ mol-1) is
(a) -100x
(b) -50x
(c) +100x
(d) +50x
Solution. Answer: (a). NaOH = 0.01 mol, HCl = 0.01 mol, so x kJ is released for 0.01 mol: ΔH = -x/0.01 = -100x kJ mol-1.
Teacher's Note: Find moles of limiting reagent (0.01) and scale x kJ to per mole.
Exam Note: Heat released means negative sign.
Question 39 (MCQ). Enthalpy of neutralization of HCl with NaOH is x. The heat evolved when 500 ml of 2 N HCl will be mixed with 250 ml of 4 N NaOH will be
(a) 500x
(b) 100x
(c) x
(d) 10x
Solution. Answer: (c). 500 mL × 2 N = 1 equivalent HCl; 250 mL × 4 N = 1 equivalent NaOH; heat = x for 1 mole.
Teacher's Note: Equivalents give moles of water formed: here exactly 1 mole.
Exam Note: Convert N × V to equivalents.
Question 40 (MCQ). One mole of a non-ideal gas undergoes a change of state (2.0 atm, 3.0 L, 95 K) → (4.0 atm, 5.0 L, 245 K) with a change in internal energy, ΔU = 30.0 L atm. The change in enthalpy (ΔH) of the process in L atm is
(a) 40.0
(b) 42.3
(c) 44.0
(d) not defined because pressure is not constant
Solution. Answer: (c). ΔH = ΔU + Δ(PV) = 30.0 + (4.0 × 5.0 - 2.0 × 3.0) = 30 + 14 = 44.0 L atm.
Teacher's Note: H = U + PV applies to any change of state, so use Δ(PV), not PΔV.
Exam Note: Compute Δ(PV) from final and initial states.
Question 41 (MCQ). Which one of the following reaction defines ΔHf°?
(a) C (diamond) + O2 (g) → CO2 (g)
(b) ½H2 (g) + ½F2 (g) → HF (g)
(c) N2 (g) + 3H2 (g) → 2NH3 (g)
(d) CO (g) + ½O2 (g) → CO2 (g)
Solution. Answer: (b). Only (b) forms one mole of a compound from its elements in standard states.
Teacher's Note: (a) uses diamond, (c) forms 2 mol, (d) starts from a compound.
Exam Note: One mole from elements in standard state.
Question 42 (MCQ). For the reaction C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (l) at constant temperature, ΔH - ΔE is
(a) +RT
(b) -3RT
(c) +3RT
(d) -RT
Solution. Answer: (b). Δng = 3 - 6 = -3, so ΔH - ΔE = ΔngRT = -3RT.
Teacher's Note: Water is liquid, so count 3 gaseous products against 6 gaseous reactants.
Exam Note: Ignore liquid water in Δng.
Question 43 (MCQ). For which one of the following equations is ΔH°reaction equal to ΔH°f for the product?
(a) N2 (g) + O3 (g) → N2O3 (g)
(b) CH4 (g) + 2Cl2 (g) → CH2Cl2 (l) + 2HCl (g)
(c) Xe (g) + 2F2 (g) → XeF4 (g)
(d) 2CO (g) + O2 (g) → 2CO2 (g)
Solution. Answer: (c). Only (c) forms one mole of the product from elements in their standard states.
Teacher's Note: O3 is not the standard state of oxygen; (b), (d) involve compounds.
Exam Note: Reactants must all be elements in standard state.
Question 44 (MCQ). The enthalpy change for a reaction does not depend upon
(a) use of different reactants for the same products
(b) the nature of intermediate reaction steps
(c) the differences in the initial and final temperatures of the involved substances
(d) the physical state of the reactants and products
Solution. Answer: (b). By Hess's law, ΔH depends only on initial and final states, not on the route.
Teacher's Note: Enthalpy is a state function.
Exam Note: Cite Hess's law.
Question 45 (MCQ). ΔHf of graphite is 0.23 kJ/mole and ΔHf for diamond is 1.896 kJ/mole. ΔHtransition from graphite to diamond is
(a) 1.66 kJ/mole
(b) 2.1 kJ/mole
(c) 2.33 kJ/mole
(d) 1.5 kJ/mole
Solution. Answer: (a). ΔH = 1.896 - 0.23 = 1.666 ≈ 1.66 kJ/mole.
Teacher's Note: Transition enthalpy = ΔHf(diamond) - ΔHf(graphite).
Exam Note: Subtract the two formation values.
Question 46 (MCQ). The bond energies of C-C, C = C, H-H and C-H linkages are 350, 600, 400 and 410 kJ per mole respectively. The heat of hydrogenation of ethylene is
(a) -170 kJ mol-1
(b) -260 kJ mol-1
(c) -400 kJ mol-1
(d) -450 kJ mol-1
Solution. Answer: (a). C2H4 + H2 → C2H6: ΔH = (600 + 400) - (350 + 2 × 410) = 1000 - 1170 = -170 kJ mol-1.
Teacher's Note: Broken: C=C and H-H; formed: C-C and two C-H.
Exam Note: Bonds broken minus bonds formed.
Question 47 (MCQ). One gram of sample of NH4NO3 is decomposed in a bomb calorimeter. The temperature of the calorimeter increases by 6.12 K. The heat capacity of the system is 1.23 kJ/g/deg. What is the molar heat of decomposition for NH4NO3?
(a) -7.53 kJ/mol
(b) -398.1 kJ/mol
(c) -16.1 kJ/mol
(d) -602 kJ/mol
Solution. Answer: (d). Heat for 1 g = 1.23 × 6.12 = 7.53 kJ; for 80 g mol-1: 7.53 × 80 = 602 kJ, exothermic so -602 kJ/mol.
Teacher's Note: Scale heat per gram by molar mass 80 g mol-1.
Exam Note: Do not forget the negative sign.
Question 48 (MCQ). How much energy is released when 6 moles of octane is burnt in air? Given ΔHf° for CO2 (g), H2O (g) and C8H18 (l) respectively are -490, -240 and +160 kJ mol-1.
(a) -6.2 kJ
(b) -37.4 kJ
(c) -35.5 kJ
(d) -20.0 kJ
Solution. Answer: (b). C8H18 + 12.5O2 → 8CO2 + 9H2O: ΔH = 8(-490) + 9(-240) - 160 = -6240 kJ mol-1; for 6 mol = -37440 kJ = -37.4 MJ (the printed option is labelled kJ but the value corresponds to MJ).
Teacher's Note: Balance octane combustion, then use ΣΔHf and multiply by 6 mol.
Exam Note: Balance the equation first.
Question 49 (MCQ). If the bond energies of H-H, Br-Br and H-Br are 433, 192 and 364 kJ mol-1 respectively, the ΔH° for the reaction H2 (g) + Br2 (g) → 2HBr (g) is
(a) -261 kJ
(b) +103 kJ
(c) +261 kJ
(d) -103 kJ
Solution. Answer: (d). ΔH = (433 + 192) - 2 × 364 = 625 - 728 = -103 kJ.
Teacher's Note: Bonds broken minus bonds formed; two H-Br bonds formed per H2.
Exam Note: Count two H-Br bonds.
Question 50 (MCQ). The work done during the expansion of a gas from a volume of 4 dm3 to 6 dm3 against a constant external pressure of 3 atm is (1 L atm = 101.32 J)
(a) -6 J
(b) -608 J
(c) +304 J
(d) -304 J
Solution. Answer: (b). w = -PextΔV = -3 × (6 - 4) L atm = -6 L atm = -6 × 101.32 J = -608 J.
Teacher's Note: Expansion against constant pressure: w = -PΔV; convert L atm to joules.
Exam Note: Convert 6 L atm using 101.32.
Question 51 (MCQ). Two moles of an ideal gas is expanded isothermally and reversibly from 1 litre to 10 litre at 300 K. The enthalpy change (in kJ) for the process is
(a) 11.4 kJ
(b) -11.4 kJ
(c) 0 kJ
(d) 4.8 kJ
Solution. Answer: (c). ΔH = Δ(E + PV) = ΔE + Δ(RT) = ΔE + RΔT; for an isothermal ideal-gas process ΔE = 0 (CvΔT, ΔT = 0) so ΔH = 0.
Teacher's Note: Ideal gas enthalpy depends on T only, so isothermal ΔH = 0.
Exam Note: Say ΔH depends only on T.
Question 52 (MCQ). An ideal gas expands in volume from 1 × 10-3 m3 to 1 × 10-2 m3 at 300 K against a constant pressure of 1 × 105 Nm-2. The work done is
(a) -900 J
(b) -900 kJ
(c) 270 kJ
(d) 900 kJ
Solution. Answer: (a). w = -PΔV = -105 Nm-2 × (10-2 - 10-3) m3 = -900 N m = -900 J.
Teacher's Note: Pressure in N m-2 times volume in m3 gives joules directly.
Exam Note: Keep SI units throughout.
Question 53 (MCQ). During isothermal expansion of ideal gas, its
(a) Internal energy increases
(b) Enthalpy increases
(c) Enthalpy reduces to zero
(d) Enthalpy remains unchanged
Solution. Answer: (d). The book's hint refers to MCQ 51: for isothermal expansion of an ideal gas ΔH = 0, i.e. enthalpy remains unchanged. Corrected: the printed key shows (c), but (c) says enthalpy reduces to zero, which is wrong; the correct option is (d).
Teacher's Note: Ideal gas H and U depend only on T, so both stay constant.
Exam Note: Unchanged is not the same as zero.
Question 54 (MCQ). Internal energy is
(a) partly potential and partly kinetic
(b) totally kinetic
(c) totally potential
(d) none of these
Solution. Answer: (a). Internal energy is the sum of kinetic energy (motion of molecules) and potential energy (intermolecular and bond energies).
Teacher's Note: U sums molecular kinetic and potential energies.
Exam Note: Name both kinetic and potential parts.
Question 55 (MCQ). Among the following intensive property is
(a) mass
(b) volume
(c) surface tension
(d) enthalpy
Solution. Answer: (c). Mass, volume and enthalpy depend on the amount of substance (extensive); surface tension does not, so it is intensive.
Teacher's Note: Intensive properties are independent of the quantity of matter.
Exam Note: Test: halve the sample, does it change?
Question 56 (MCQ). When 50 cm3 of 0.2 N H2SO4 is mixed with 50 cm3 of 1 N KOH, the heat liberated is
(a) 11.46 kJ
(b) 57.3 kJ
(c) 573 kJ
(d) 573 J
Solution. Answer: (d). H2SO4 = 50 × 0.2 = 10 meq; KOH = 50 × 1 = 50 meq. 10 meq of H2SO4 neutralise 10 meq of KOH: heat = (57.3 kJ/1000) × 10 = 0.573 kJ = 573 J.
Teacher's Note: Acid is the limiting reagent: 10 milliequivalents react.
Exam Note: Use limiting equivalents, not total.
Question 57 (MCQ). The enthalpy of the reaction H2 (g) + ½O2 (g) → H2O (g) is ΔH1 and that of H2 (g) + ½O2 (g) → H2O (l) is ΔH2. Then
(a) ΔH1 < ΔH2
(b) ΔH1 + ΔH2 = 0
(c) ΔH1 > ΔH2
(d) ΔH1 = ΔH2
Solution. Answer: (a). When H2O (g) condenses to H2O (l), heat is evolved, so the heat evolved in forming liquid water (ΔH2) is greater than for steam (ΔH1), in magnitude (-285.8 kJ against -241.8 kJ). Answer as per the book key.
Teacher's Note: Liquid water formation releases extra heat equal to condensation enthalpy.
Exam Note: Compare magnitudes of heat evolved.
Question 58 (MCQ). The enthalpy of combustion of methane at 25°C is 890 kJ. The heat liberated when 3.2 g of methane is burnt in air is
(a) 445 kJ
(b) 278 kJ
(c) -890 kJ
(d) 178 kJ
Solution. Answer: (d). 16 g CH4 produce heat = 890 kJ, so 3.2 g produce (890/16) × 3.2 = 178 kJ.
Teacher's Note: Scale by mass: 3.2 g is one-fifth of a mole.
Exam Note: Use molar mass 16 g mol-1.
Question 59 (MCQ). If for (i) C + O2 → CO2, (ii) C + 1/2 O2 → CO, (iii) CO + 1/2 O2 → CO2, the heats of reaction are Q, -12 and -10 respectively. Then Q =
(a) -2
(b) 2
(c) -22
(d) -16
Solution. Answer: (c). Eqn. (ii) + Eqn. (iii) gives equation (i): Q = -12 + (-10) = -22.
Teacher's Note: Hess: the two-step route via CO equals direct combustion of carbon.
Exam Note: Add steps (ii) and (iii).
Question 60 (MCQ). 1 mole of H2SO4 is mixed with 2 moles of NaOH. The heat evolved will be
(a) 57.3 kJ
(b) 2 × 57.3 kJ
(c) 57.3/2 kJ
(d) cannot be predicted
Solution. Answer: (b). 1 mole of H2SO4 = 2 g eq of H2SO4, neutralised by 2 moles NaOH, so heat = 2 × 57.3 kJ.
Teacher's Note: H2SO4 is dibasic, giving 2 equivalents of H+.
Exam Note: Convert moles to gram equivalents.
Question 61 (MCQ). The enthalpy of a monoatomic gas at T kelvin is
(a) (7/2)RT
(b) (3/2)RT
(c) (1/2)RT
(d) ½mv2
(e) (5/2)RT
Solution. Answer: (e). For a monoatomic gas (per mole): H = E + PV = E + RT = (3/2)RT + RT = (5/2)RT.
Teacher's Note: Add PV = RT to the translational energy (3/2)RT.
Exam Note: Use H = E + PV.
Question 62 (MCQ). CH2 = CH2 (g) + H2 (g) → CH3 - CH3 (g). The heat of reaction is [bond energy of C-C = 80 kcal, C = C = 145 kcal, C-H = 98 kcal, H-H = 103 kcal]
(a) -14 kcal
(b) -28 kcal
(c) -42 kcal
(d) -56 kcal
Solution. Answer: (b). ΔH = ΣB.E. (Reactants) - ΣB.E. (Products) = [145 + 4 × 98 + 103] - [80 + 6 × 98] = 640 - 668 = -28 kcal.
Teacher's Note: Bonds broken: C=C, H-H, 4 C-H; formed: C-C, 6 C-H.
Exam Note: Cancel the four C-H bonds.
Free study material for Chemistry
Pradeep's KL Gogia Solutions for Class 11 Mathematics: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 5 First Law Of Thermodynamics Chemical Energetics Part 3
Download Pradeep's KL Gogia Solutions for Class 11
Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 5 First Law Of Thermodynamics Chemical Energetics Part 3. These structured Pradeep's KL Gogia Solutions solutions for Class 11 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Mastering Core Concepts with Pradeep's KL Gogia Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for Class 11 Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.