Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 11 Hydrogen Part 2

Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 11 Hydrogen

Review structured textbook solutions for Class 11 Chemistry Chapter 11 Hydrogen prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 11 Chemistry Solutions: Chapter 11 Hydrogen

Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 11 Hydrogen - Part 2 (Hydrogen Peroxide, Hydrogen Economy and Practice Questions)

Numerical Problems on the Strength of Hydrogen Peroxide Solutions

Question Example 11.1. Calculate the normality of 20 volume hydrogen peroxide solution.

Solution. Step 1. Strength in g/L of 20 volume H2O2. 1 litre of 20 volume H2O2 gives 20 litres of O2 at N.T.P. 2H2O2 → 2H2O + O2; 2 × 34 = 68 g H2O2 gives 22.4 litres O2. So H2O2 needed = (68 × 20)/22.4 g = 60.7 g. Strength = 60.7 g/L. Step 2. Equivalent weight of H2O2: 32 parts by weight of O2 come from 68 parts of H2O2, so 8 parts of O2 come from (68/32) × 8 = 17 parts. Eq. wt. = 17. Step 3. Normality = Strength / Eq. wt. = 60.7/17 = 3.57. Hence the normality of 20 volume H2O2 = 3.57 N.

Teacher's Note: Volume strength gives litres of O2 per litre; convert to grams, then divide by equivalent weight 17.

Exam Note: Show all three steps; equivalent weight 17 earns a mark.

Question Example 11.2. Find the volume strength of 1.6 N H2O2 solution.

Solution. Strength = Normality × Eq. wt., and Eq. wt. of H2O2 = 17. Strength of 1.6 N solution = 1.6 × 17 g/L. 68 g of H2O2 gives 22400 ml O2 at N.T.P., so 1.6 × 17 g gives (22400/68) × 1.6 × 17 = 8960 ml O2. These are present in 1000 ml of solution, so 1000 ml gives 8960 ml O2; 1 ml gives 8960/1000 = 8.96 ml O2 at N.T.P. Hence the volume strength of 1.6 N H2O2 = 8.96 volume.

Teacher's Note: Reverse of Example 11.1: normality to g/L, then to volume of O2 per ml.

Exam Note: Cross-check: 5.6 × 1.6 = 8.96.

Question Example 11.3. Calculate the volume strength of a 3% solution of H2O2.

Solution. Step 1. 100 ml of solution contains 3 g H2O2, so 1000 ml contains (3/100) × 1000 = 30 g. Step 2. 68 g of H2O2 gives 22.4 litres O2 at N.T.P., so 30 g gives (22.4/68) × 30 = 9.88 litres = 9880 ml. These are present in 1000 ml, so 1 ml of solution gives 9880/1000 = 9.88 ml O2 at N.T.P. Hence the volume strength of 3% H2O2 = 9.88.

Teacher's Note: Percentage strength is g per 100 ml; scale to 1 litre before finding O2 evolved.

Exam Note: Answer is about 10 volume; state it with units.

Question Example 11.4. What is the mass of hydrogen peroxide present in 1 litre of 2M solution? Calculate the volume of oxygen at STP liberated upon complete decomposition of 100 cm3 of the above solution.

Solution. Step 1. Molecular mass of H2O2 = 2 × 1 + 2 × 16 = 34 a.m.u. 1 litre of 1M H2O2 contains 34 g, so 1 litre of 2M contains 34 × 2 = 68 g. Step 2. 100 cm3 of 2M solution contains (68/1000) × 100 = 6.8 g H2O2. 2H2O2 → 2H2O + O2; 2 × 34 = 68 g gives 22400 cm3 O2 at STP. So 6.8 g gives (22400/68) × 6.8 = 2240 cm3 = 2.24 litres.

Teacher's Note: Molarity gives mass per litre; 68 g H2O2 always gives 22.4 L O2.

Exam Note: Mass answer 68 g and volume 2.24 L, both with units.

Question Example 11.5. 30 ml of a H2O2 solution after acidification required 30 ml of N/10 KMnO4 solution for complete oxidation. Calculate the percentage and volume strength of H2O2 solution.

Solution. Step 1. Normality of H2O2: N1V1 = N2V2, 30 × N1 = 30 × 1/10, so N1 = 0.1 N. Step 2. Percentage strength: H2O2 → 2H+ + O2 + 2e-, so Eq. wt. = 34/2 = 17. Strength = Normality × Eq. wt. = 0.1 × 17 = 1.7 g/litre. % strength = (1.7 × 100)/1000 = 0.17%. Step 3. Volume strength: 68 g H2O2 gives 22400 ml O2 at N.T.P., so 1.7 g gives (22400/68) × 1.7 = 560 ml. These are present in 1000 ml, so 1 ml gives 560/1000 = 0.56 ml O2. Volume strength = 0.56.

Teacher's Note: Titration gives normality via N1V1 = N2V2; from it get g/L, %, then volume strength.

Exam Note: Equal volumes and 0.1 N: write the formula before substituting.

Problems for Practice

Question Practice 1. Calculate the concentration in gram/litre of a 20 volume H2O2 solution.

Solution. 60.7 g/L. (Answer printed in the book; working as in Example 11.1: (68 × 20)/22.4 = 60.7 g/L.)

Teacher's Note: 20 volume means 20 L O2 per litre; 68 g H2O2 gives 22.4 L.

Exam Note: Give unit g/L.

Question Practice 2. Find the volume strength of 2N H2O2 solution.

Solution. 11.2 volume. (Answer printed in the book; working: 2 × 17 = 34 g/L, (22400/68) × 34 = 11200 ml per litre.)

Teacher's Note: Normality × 5.6 gives volume strength directly: 2 × 5.6 = 11.2.

Exam Note: Memorise the factor 5.6.

Question Practice 3. Calculate the normality of a solution of 1 litre of hydrogen peroxide labelled 30 volumes.

Solution. 5.357 N. (Answer printed in the book; working: strength = (68 × 30)/22.4 = 91.07 g/L; N = 91.07/17 = 5.357.)

Teacher's Note: Convert volume strength to g/L, then divide by 17; or divide 30 by 5.6.

Exam Note: 30/5.6 = 5.357 N.

Question Practice 4. Calculate the amount per litre of 10 ml of a solution of hydrogen peroxide labelled 20 volumes.

Solution. 60.7 g/litre. (Answer printed in the book.)

Teacher's Note: Labelled 20 volume means 20 ml O2 per ml of solution, about 60.7 g H2O2 per litre.

Exam Note: Strength is independent of sample volume taken.

Conceptual Questions

Question Conceptual 1. Which isotope of hydrogen is used as a tracer in organic reactions?

Solution. Hydrogen has three isotopes, viz. H, D and T. Due to the difference in masses, the rate constants of these isotopes with the same substrate are different. In other words, both D and T show isotope effect. But since T is not only radioactive but also least abundant hydrogen isotope, therefore D is used as a tracer to study the mechanism of organic reactions.

Teacher's Note: Deuterium is stable and fairly abundant, so it is the practical tracer.

Exam Note: Name deuterium and give two reasons.

Question Conceptual 2. Name one example of a reaction in which dihydrogen acts (i) as an oxidising agent and (ii) as a reducing agent.

Solution. (i) In the reaction of dihydrogen with metals to form metal hydrides, it acts as an oxidising agent: 2Na(s) + H2(g) → 2Na+H-(s) on heating. Here Na has been oxidised to Na+ while dihydrogen has been reduced to hydride (H-) ion. (ii) In the reaction of heated cupric oxide with dihydrogen to form H2O and copper metal, dihydrogen acts as a reducing agent: CuO(s) + H2(g) → Cu(s) + H2O(g) on heating. Here CuO is reduced to Cu while dihydrogen is oxidised to H2O.

Teacher's Note: H2 gains electrons with metals (H goes to -1) and loses them with oxides (H goes to +1).

Exam Note: Mention oxidation-state change for each case.

Question Conceptual 3. Hydrogen forms three types of bonds in its compounds. Describe each type of bonding with suitable examples. (N.C.E.R.T.)

Solution. Hydrogen forms compounds in three different ways: (i) by loss of electrons, as in the reactions of H2 with metal oxides, i.e. heated CuO and Fe3O4: CuO(s) + H2(g) → Cu(s) + H2O(g); Fe3O4(s) + 4H2(g) → 3Fe(s) + 4H2O(g). (ii) by gain of electrons, as in the reactions of H2 with metals: 2Na(s) + H2(g) → 2Na+H-(s) on heating; Ca(s) + H2(g) → Ca2+(H-)2 on heating. (iii) by sharing of electrons, as in the reactions of H2 with halogens: H2(g) + F2(g) → 2H-F(l) in the dark at 23 K; H2(g) + Cl2(g) → 2H-Cl(g) in diffused sunlight.

Teacher's Note: Three modes: loss (H+-type), gain (H-, ionic hydrides), sharing (covalent).

Exam Note: Give one equation per type.

Question Conceptual 4. Conc. H2SO4 cannot be used for drying H2. Why?

Solution. Conc. H2SO4 on absorbing H2O from moist H2 produces so much heat that hydrogen catches fire.

Teacher's Note: Strongly exothermic dilution plus flammable gas is dangerous.

Exam Note: One line: heat of hydration ignites hydrogen.

Question Conceptual 5. Why is dioxygen paramagnetic?

Solution. M.O. diagram shows that O2 has two unpaired electrons and thus shows paramagnetism.

Teacher's Note: Two unpaired electrons in antibonding π* orbitals, which Lewis structure fails to show.

Exam Note: Quote M.O. theory.

Question Conceptual 6. Can marine species live in distilled water?

Solution. No, because distilled H2O does not contain dissolved O2.

Teacher's Note: Aquatic life breathes dissolved oxygen, which distillation removes.

Exam Note: Reason is absence of dissolved O2.

Question Conceptual 7. A sample of hard water is allowed to pass through an anion exchanger. Will it produce lather with soap easily?

Solution. No, because Ca2+ and Mg2+ ions are still present and these will react with soap to form curdy white ppt. Therefore, it will not produce lather with soap easily.

Teacher's Note: Hardness is due to cations, so an anion exchanger leaves it hard.

Exam Note: Cation exchanger is needed to soften.

Question Conceptual 8. Can distilled water be called as deionised water?

Solution. Yes. Distilled water does not contain any cations and anions and hence can be called as deionized water.

Teacher's Note: Both remove dissolved ions, by different methods.

Exam Note: Distillation also removes non-volatile impurities.

Question Conceptual 9. Explain why oxide ion is called a hard ion?

Solution. Oxide ion is very small in size and thus cannot be easily polarized and hence it is called a hard ion.

Teacher's Note: Small size gives high charge density, so low polarisability.

Exam Note: Link small size to low polarisability.

Question Conceptual 10. Anhydrous BaO2 is not used for preparing H2O2. Why?

Solution. Anhydrous BaO2 is not used because the BaSO4 formed during the reaction forms a protective layer around unreacted BaO2 and the reaction stops after some time.

Teacher's Note: Insoluble BaSO4 coats the solid, so hydrated BaO2 is used.

Exam Note: Mention the protective BaSO4 layer.

Very Short Answer Questions (Carrying 1 Mark)

Question VSA 1. Which isotope of hydrogen (i) does not contain neutrons, (ii) contains equal number of protons and neutrons, (iii) is radioactive?

Solution. (i) protium (ii) deuterium (iii) tritium.

Teacher's Note: Protium has 1 proton, 0 neutrons; deuterium 1 and 1; tritium 1 and 2.

Exam Note: Three names, one word each.

Question VSA 2. Why is dihydrogen not preferred in balloons these days?

Solution. Dihydrogen is highly combustible and hence is likely to catch fire in presence of excess of air.

Teacher's Note: Helium is non-flammable, so it replaced hydrogen.

Exam Note: Say flammability.

Question VSA 3. Name one compound each in which hydrogen exists in (i) +1 and (ii) -1 oxidation state.

Solution. (i) HCl or H2O or NH3 (ii) NaH or CaH2.

Teacher's Note: Hydrogen is -1 only with metals in ionic hydrides.

Exam Note: Give compounds, not just states.

Question VSA 4. What is the importance of heavy water with regard to nuclear power generation?

Solution. It is used as a moderator to slow down the neutrons produced as a result of fission and thus helps to control the nuclear reactions.

Teacher's Note: D2O slows neutrons without absorbing them much.

Exam Note: Key word: moderator.

Question VSA 5. How is heavy water produced from ordinary water?

Solution. It is obtained by repeated electrolysis of ordinary water containing 3% NaOH.

Teacher's Note: H2O electrolyses faster, so D2O accumulates in the residue.

Exam Note: Mention repeated electrolysis.

Question VSA 6. What do you mean by 15 volume H2O2 solution?

Solution. 1 cm3 of a 15 volume H2O2 solution gives 15 cm3 of O2 at NTP.

Teacher's Note: Volume strength is O2 released per unit volume of solution at NTP.

Exam Note: State volume of O2 and NTP.

Question VSA 7. Name two compounds which retard the decomposition of H2O2 solution.

Solution. Acetanilide, glycerol.

Teacher's Note: These negative catalysts are added as stabilisers.

Exam Note: Two names suffice.

Question VSA 8. Calculate the amount of H2O2 present in 10 ml of 25 volume H2O2 solution.

Solution. 10 ml of 25 volume H2O2 liberate O2 = 10 × 25 = 250 ml at NTP. 2H2O2 → 2H2O + O2; 68 g gives 22400 ml at NTP. Amount of H2O2 that will liberate 250 ml of O2 at NTP = (68 × 250)/22400 = 0.759 g.

Teacher's Note: Find O2 volume first, then use 68 g : 22400 ml.

Exam Note: Final answer 0.759 g.

Question VSA 9. Hydrogen peroxide is used to restore the colour of old oil paintings containing lead oxide. Write a balanced equation of the reaction that takes place in this process.

Solution. The book refers to the answer of Q. 2 of the C.B.S.E.-P.M.T. (Mains) Special: the black lead sulphide (PbS) formed on the painting is oxidised by H2O2 to white lead sulphate: PbS + 4H2O2 → PbSO4 + 4H2O.

Teacher's Note: Black PbS becomes white PbSO4, restoring the paint colour.

Exam Note: Balance: 4H2O2 supplies four O.

Question VSA 10. 10 ml of a given solution of H2O2 contains 0.91 g of H2O2. Express its strength in volume.

Solution. 68 g of H2O2 produce O2 = 22400 ml at NTP. So 0.91 g of H2O2 will produce O2 = (22400 × 0.91)/68 = 300 ml at NTP. Volume strength = 300/10 = 30.

Teacher's Note: Volume strength is ml O2 per ml solution; here 300/10.

Exam Note: Answer: 30 volume.

Question VSA 11. What is the chemical composition of zeolite?

Solution. Hydrated sodium aluminium silicate, Na2Al2Si2O8·xH2O.

Teacher's Note: Zeolite (permutit) exchanges Na+ for Ca2+/Mg2+.

Exam Note: Write the formula.

Question VSA 12. What is water gas? How is it prepared?

Solution. An equimolar mixture of CO and H2 is called water gas. It is prepared by passing steam over red hot coke: C(s) + H2O(g) → CO(g) + H2(g) at 1270 K.

Teacher's Note: Water gas (syngas) feeds the water-gas shift reaction for H2.

Exam Note: Include equation and 1270 K.

Question VSA 13. Name one example of a reaction in which dihydrogen acts (i) as an oxidising agent (ii) as a reducing agent.

Solution. Oxidising agent: 2Na + H2 → 2Na+H-. Reducing agent: CuO + H2 → Cu + H2O (on heating).

Teacher's Note: Same as Conceptual 2: H2 gains electrons with metals, loses with oxides.

Exam Note: One equation each.

Question VSA 14. What happens when heavy water is added to calcium carbide?

Solution. Deuteroacetylene is formed: CaC2 + 2D2O → Ca(OD)2 + DC≡CD.

Teacher's Note: Analogue of CaC2 + 2H2O giving C2H2.

Exam Note: Name C2D2 and balance.

Question VSA 15. What is demineralized water? How is it obtained?

Solution. Water which does not contain cations and anions is called demineralized water. It is obtained by passing ordinary water through ion exchange resins.

Teacher's Note: Cation resin gives H+, anion resin gives OH-; they combine to water.

Exam Note: Mention both resins.

Question VSA 16. The boiling point of H2O is higher than that of H2S. Explain.

Solution. Due to extensive intermolecular H-bonding in H2O, the b.p. of H2O is much higher than that of H2S.

Teacher's Note: Oxygen is small and electronegative; sulphur does not H-bond appreciably.

Exam Note: Cite intermolecular H-bonding.

Question VSA 17. What is hydrolith? How is it prepared?

Solution. Ca + H2 → CaH2 (hydrolith), on heating.

Teacher's Note: Hydrolith is calcium hydride, a field source of H2 with water.

Exam Note: Name CaH2 and equation.

Question VSA 18. Write the structures of two complex metal hydrides which are used as reducing agent in organic synthesis.

Solution. LiAlH4 and NaBH4.

Teacher's Note: Both contain tetrahedral AlH4- or BH4- ions.

Exam Note: Write both formulas.

Question VSA 19. What type of elements form interstitial hydrides?

Solution. d- and f-block elements.

Teacher's Note: Transition metals trap H atoms in lattice gaps.

Exam Note: d- and f-block.

Question VSA 20. Write two uses of interstitial hydrides.

Solution. (i) Storing H2 and (ii) catalysts for hydrogenation reactions.

Teacher's Note: Metal lattices absorb and release hydrogen reversibly.

Exam Note: Two uses.

Question VSA 21. What happens when chloroform is treated with heavy water in presence of an alkali?

Solution. Deuterochloroform (CDCl3) is formed: CHCl3 + D2O → CDCl3 + DOH (in presence of OH-).

Teacher's Note: Base-catalysed H/D exchange at the acidic C-H of CHCl3.

Exam Note: Give product CDCl3.

Question VSA 22. Why is sodium chloride less soluble in heavy water than in ordinary water?

Solution. Due to lower dielectric constant of D2O over H2O, NaCl is less soluble in D2O than in H2O.

Teacher's Note: Lower dielectric constant means weaker ion separation.

Exam Note: Link to dielectric constant.

Question VSA 23. Explain why beryllium forms a covalent hydride while calcium forms an ionic hydride.

Solution. Because of higher electronegativity (E.N. = 1.5), Be forms covalent hydride while due to lower electronegativity (E.N. = 1.0) Ca forms ionic hydride.

Teacher's Note: Small electronegativity gap with H gives covalent character (Fajans-type reasoning).

Exam Note: Compare electronegativities.

Question VSA 24. Give two advantages of using hydrogen as a fuel over gasoline.

Solution. High heat of combustion and no pollutants like SO2, NO2, CO2 etc.

Teacher's Note: Hydrogen releases about 115 MJ/kg and burns to water.

Exam Note: Give two points.

Question VSA 25. Explain why electrolysis of ordinary water occurs faster than heavy water.

Solution. Due to higher bond dissociation energy of protium bonds in H-O-H than deuterium bonds in D-O-D, electrolysis of H2O occurs much faster than that of D2O.

Teacher's Note: The text states the bond-energy reason; kinetic isotope effect governs the rate.

Exam Note: Cite isotope effect.

Question VSA 26. What is meant by autoprotolysis of water? (N.C.E.R.T.)

Solution. Autoprotolysis of water means that two molecules of water react with each other through proton transfer i.e. one acts as the acid while the other acts as the base. The molecule which accepts a proton is converted into H3O+ while that which loses a proton is converted into OH- ion. Thus, H2O(l) + H2O(l) ⇌ H3O+(aq) + OH-(aq) (acid1, base2, acid2, base1).

Teacher's Note: Water acting as both acid and base is amphoteric.

Exam Note: Write the equation with conjugate pairs.

Question VSA 27. What is understood by hydrogenation? (N.C.E.R.T.)

Solution. Hydrogenation means addition of H2 in presence of a catalyst to multiple bonds to form saturated compounds. For example, CH2=CH2 + H2 → CH3-CH3 (Ni or Pt or Pd, 473 K); ethene gives ethane.

Teacher's Note: Catalyst (Ni, Pt, Pd) is essential; used for vegetable ghee.

Exam Note: Define with catalyst and example.

Question VSA 28. Is it correct to say that hydrogen can behave as a metal? State the conditions under which such behaviour can be possible. (N.C.E.R.T.)

Solution. Yes, H2 can act as a metal under very very high pressures.

Teacher's Note: Metallic hydrogen exists at extreme pressure, e.g. inside giant planets.

Exam Note: Say very high pressure.

Question VSA 29. Ionic hydrides are frequently used to remove traces of water from organic compounds. What is underlying basis of this process? (N.C.E.R.T.)

Solution. H- is a strong Bronsted base and hence reacts with H2O readily liberating H2 gas: H2O(l) + H-(s) → H2(g) + OH-(aq).

Teacher's Note: Hydride accepts a proton from water, removing it as H2.

Exam Note: Mention Bronsted base action.

Question VSA 30. Although D2O resembles H2O, chemically yet it is a toxic substance. Explain. (N.C.E.R.T.)

Solution. D2O is toxic since D+ reacts at a much slower rate as compared to H+ in enzyme-catalyzed reactions.

Teacher's Note: Kinetic isotope effect slows biochemical reactions.

Exam Note: Cite slow enzyme reactions.

Question VSA 31. Give an example each of an ionic hydride and a covalent hydride. (N.C.E.R.T.)

Solution. Ionic: NaH or CaH2. Covalent: H2O, B2H6, CH4 etc.

Teacher's Note: s-block metals give ionic hydrides, p-block nonmetals covalent.

Exam Note: One example each.

Question VSA 32. What is the difference between hydrolysis and hydration? (N.C.E.R.T.)

Solution. Interaction of H+ and OH- ions of H2O with the anion and the cation of a salt respectively to give the original acid and the original base is called hydrolysis. For example, Na2CO3 + 2H2O → 2NaOH + H2CO3 (base, acid). Hydration, on the other hand, means addition of H2O to ions or molecules to form hydrated ions or hydrated salts. For example, Na+Cl- + H2O → Na+(aq) + Cl-(aq); CuSO4 + 5H2O → CuSO4·5H2O (colourless to blue).

Teacher's Note: Hydrolysis breaks salt into acid and base; hydration just attaches water.

Exam Note: Give one example each.

C.B.S.E.-P.M.T. (Mains) Special - A. Subjective Questions (Common with I.I.T.)

Question CBSE-PMT 1. The process 1/2 H2(g) + e- → H-(g) is endothermic (ΔH = +151 kJ mol-1), yet salt like hydrides are known. How do you account for this?

Solution. It is true that formation of hydride (H-) ion is an endothermic process, yet alkali and alkaline earth metals form salt like hydrides. This is due to the reason that high lattice energy released (energy released during the formation of solid metal hydrides from their corresponding gases ions, i.e., M+ and H-) more than compensates the energy needed for the formation of H- ions from H2 gas.

Teacher's Note: Overall stability depends on lattice energy outweighing the endothermic H- formation.

Exam Note: Compare lattice energy with 151 kJ/mol.

Question CBSE-PMT 2. Statues coated with white lead on long exposure to atmosphere turn black and the original colour can be restored on treatment with H2O2. Why? (Roorkee 1987)

Solution. On long exposure to atmosphere, white lead is converted into black PbS due to the action of H2S present in the atmosphere. As a result, statues turn black. PbO2 + 2H2S → PbS + 2H2O (as printed in the book). On treatment of these blackened statues with H2O2, the black PbS gets oxidised to white PbSO4 and the colour is restored. PbS + 4H2O2 → PbSO4 + 4H2O. Corrected: the printed first equation is not balanced (sulphur is not conserved) and white lead is not PbO2; with white lead (basic lead carbonate) the balanced equation is 2PbCO3·Pb(OH)2 + 3H2S → 3PbS + 2CO2 + 4H2O. The restoring reaction PbS + 4H2O2 → PbSO4 + 4H2O is correct.

Teacher's Note: Black PbS turns to white PbSO4 by oxidation with H2O2; this is a standard reaction.

Exam Note: Learn PbS + 4H2O2 equation.

Question CBSE-PMT 3. A mixture of hydrazine and H2O2 with Cu(II) catalyst is used as a rocket propellant. Why?

Solution. The reaction between hydrazine and H2O2 is highly exothermic and is accompanied by a large increase in the volume of the products and hence this mixture is used as a rocket propellant. NH2-NH2(l) + 2H2O2(l) → N2(g) ↑ + 4H2O(g) ↑ (Cu(II) catalyst).

Teacher's Note: Large heat plus gaseous N2 and steam give thrust.

Exam Note: Mention exothermic and gaseous products.

Question CBSE-PMT 4. Hydrogen peroxide acts both as an oxidising agent and as a reducing agent in alkaline solution towards certain first row transition metal ions. Illustrate both these properties of H2O2 using chemical equations. (I.I.T. 1998)

Solution. Oxidising agent: 2Cr(OH)3 + 4NaOH + 3H2O2 → 2Na2CrO4 + 8H2O. Here Cr3+ gets oxidised to Cr6+. Reducing agent: 2K3[Fe(CN)6] + 2KOH + H2O2 → 2K4[Fe(CN)6] + 2H2O + O2. Here Fe3+ gets reduced to Fe2+.

Teacher's Note: H2O2 oxidises Cr(III) but reduces Fe(III) in alkaline medium.

Exam Note: Balanced equations and changed oxidation states.

Question CBSE-PMT 5. A white solid is either Na2O or Na2O2. A piece of red litmus paper turns white when it is dipped into a freshly made aqueous solution of the white solid. (i) Identify the substance and explain with balanced equation. (ii) Explain what would happen to the red litmus paper if the white solid were the other compound. (I.I.T. 1999)

Solution. (i) Na2O2 + 2H2O → 2NaOH + H2O2. H2O2 thus produced turns red litmus paper white by its bleaching action. (ii) Na2O + H2O → 2NaOH. NaOH thus produced will turn red litmus blue.

Teacher's Note: Peroxide gives H2O2 (bleach); oxide gives only base.

Exam Note: Bleaching points to peroxide.

Question CBSE-PMT 6. An element has its maximum oxidation states as +m and minimum oxidation state as -m and it does not have the possibility of undergoing disproportionation in any of its compounds. What is the value of m? (West Bengal J.E.E. 2003)

Solution. Hydrogen has maximum and minimum oxidation states as +1 and -1 respectively. Elements of group 14, i.e., C, Si, Ge, Sn & Pb can also have maximum and minimum oxidation states of +4 and -4 respectively. But all these elements undergo disproportionation reactions in some of their compounds. For example, 2H-C(=O)-H + NaOH → CH3OH + HCOONa (O.N. of C = 0; -2 and +2). Therefore, the value of m is 1.

Teacher's Note: Disproportionation is possible for carbon (Cannizzaro), not for hydrogen.

Exam Note: Answer m = 1 (hydrogen).

Question CBSE-PMT 7. (a) Is it possible to remove completely by boiling the temporary hardness due to Mg(HCO3)2? (b) Calculate the molarity strength of H2O2 solution marked '30 volume'. (West Bengal J.E.E. 2004)

Solution. (a) Temporary hardness of H2O due to Mg(HCO3)2 can be completely removed by boiling because soluble Mg(HCO3)2 is converted into insoluble MgCO3 which can be removed by filtration. Mg(HCO3)2 → MgCO3↓ + CO2↑ + H2O (on boiling). (b) Molarity = Volume strength / 11.2 = 30/11.2 = 2.68 M.

Teacher's Note: Part (b): 1 M H2O2 is 11.2 volume.

Exam Note: Answer 2.68 M, state formula 11.2.

B. Problems

Question Problem 1. Calculate the volume of 10 volume H2O2 solution that will react with 200 ml of 2 N KMnO4 in acidic medium.

Solution. Normality of 10 volume H2O2 = (10 × 68)/(22.4 × 17) = 10/5.6 N. Applying the normality equation N1V1 = N2V2 (H2O2, KMnO4): (10/5.6) × V1 = 2 × 200, so V1 = (2 × 200 × 5.6)/10 = 224 cm3.

Teacher's Note: Convert volume strength to normality (divide by 5.6), then N1V1 = N2V2.

Exam Note: Answer 224 cm3.

Question Problem 2. The degree of hardness of a given sample of hard water is 40 ppm. If the entire hardness is due to MgSO4, how much of MgSO4 is present per kg of water?

Solution. Degree of hardness of H2O is 40 ppm i.e., 106 g of water contain 40 g CaCO3. Since 1 mole of CaCO3 ≡ 1 mole of MgSO4, 100 g of CaCO3 ≡ 120 g of MgSO4. So 106 g of water contain MgSO4 = (40 × 120)/100 = 48 g, i.e. 103 g of water will contain (48 × 103)/106 g = 48 mg. 1 kg of water will contain MgSO4 = 48 mg.

Teacher's Note: Hardness is expressed as CaCO3 equivalents; scale by molar masses 120/100.

Exam Note: Answer 48 mg per kg.

I.I.T. (Mains) Special

Question IIT 1. A 5.0 cm3 solution of H2O2 liberates 0.508 g of iodine from an acidified KI solution. Calculate the strength of H2O2 solution in terms of volume strength at STP. (I.I.T. 1995)

Solution. (a) 2KI + H2SO4 + H2O2 → K2SO4 + 2H2O + I2. From the equation, H2O2 ≡ I2, i.e. 34 g of H2O2 ≡ 254 g of I2. So 0.508 g of I2 will be liberated from (34/254) × 0.508 = 0.068 g of H2O2. (b) The decomposition occurs as 2H2O2 → 2H2O + O2; 2 × 34 = 68 g ≡ 22400 cm3 at NTP. So 0.068 g of H2O2 upon decomposition will give O2 = (22400/68) × 0.068 = 22.4 ml. (c) Now 5.0 cm3 of H2O2 solution gives O2 = 22.4 cm3 at NTP, so 1.0 cm3 gives 22.4/5 = 4.48 cm3 at NTP. Thus, volume strength of given H2O2 solution = 4.48.

Teacher's Note: Chain: I2 liberated, then H2O2 mass (1:1 mole ratio), then O2 volume per cm3.

Exam Note: Answer 4.48 volume; show 34 g : 254 g.

Question IIT 2. To a 25 ml H2O2 solution, excess of acidified solution of potassium iodide was added. The iodine liberated required 20 ml of 0.3 N sodium thiosulphate solution. Calculate the volume strength of H2O2 solution. (I.I.T. 1997)

Solution. Step 1. Normality of H2O2: let it be N1. 25 ml of N1 H2O2 ≡ 20 ml of 0.3 N Na2S2O3, so 25 × N1 = 20 × 0.3, N1 = (20 × 0.3)/25 = 0.24 N. Step 2. Amount of H2O2 in 25 ml: 1000 ml of 1 N H2O2 contains 17 g, so 25 ml of 0.24 N solution contains (17 × 25 × 24)/(1000 × 100) = 0.102 g. Step 3. Volume strength: 68 g of H2O2 gives 22.4 litres O2 at N.T.P., so 0.102 g gives (22.4 × 1000 × 0.102)/68 = 33.6 ml at N.T.P. Now 25 ml of H2O2 solution gives 33.6 ml O2 at N.T.P., so 1 ml gives 33.6/25 = 1.344. Thus, the volume strength of the given H2O2 solution = 1.344.

Teacher's Note: Iodometry: equivalents of thiosulphate equal equivalents of H2O2; then 0.24 × 5.6.

Exam Note: Cross-check: 0.24 × 5.6 = 1.344 volume.

Question IIT 3. Hydrogen peroxide solution (20 ml) reacts quantitatively with a solution of KMnO4 (20 ml) acidified with dilute H2SO4. The same volume of KMnO4 solution is just decolourised by 10 ml of MnSO4 in neutral medium simultaneously forming a dark brown precipitate of hydrated MnO2. The brown precipitate is dissolved in 10 ml of 0.2 M sodium oxalate under boiling condition in the presence of dilute H2SO4. Write the balanced equations involved in the reactions and calculate the molarity of H2O2. (I.I.T. 2001)

Solution. Step 1. Balanced equations. (i) In acidic medium, MnO4- oxidises H2O2 to O2: [MnO4- + 8H+ + 5e- → Mn2+ + 4H2O] × 2; [H2O2 → O2 + 2H+ + 2e-] × 5; so 2MnO4- + 5H2O2 + 6H+ → 2Mn2+ + 5O2 + 8H2O. (ii) In neutral medium, MnO4- oxidises Mn2+ to MnO2: [MnO4- + 2H2O + 3e- → MnO2 + 4OH-] × 2; [Mn2+ + 4OH- → MnO2 + 2H2O + 2e-] × 3; so 2MnO4- + 3Mn2+ + 4OH- → 5MnO2 + 2H2O. (iii) In acidic medium, MnO2 oxidises sodium oxalate to CO2: MnO2 + C2O42- + 4H+ → Mn2+ + 2CO2 + 2H2O, or 5MnO2 + 5C2O42- + 20H+ → 5Mn2+ + 10CO2 + 10H2O. (iv) From these equations, 5C2O42- ≡ 2MnO4- ≡ 5H2O2, i.e. C2O42- ≡ H2O2 mole for mole. Step 2. Moles of C2O42- in 10 ml of 0.2 M sodium oxalate = 0.2 × 10/1000 = 2 × 10-3 mol. Step 3. Hence 2 × 10-3 mol of H2O2 is present in the H2O2 sample. The book writes "in 10 ml" and obtains molarity = (2 × 10-3/10) × 1000 = 0.2 M. Corrected: the H2O2 sample taken is 20 ml (as stated in the question), not 10 ml (10 ml is the MnSO4 volume). Molarity of H2O2 = (2 × 10-3/20) × 1000 = 0.1 M.

Teacher's Note: Link by stoichiometry: oxalate : MnO2 : H2O2 moles; divide by the 20 ml H2O2 volume.

Exam Note: Use sample volume 20 ml, not 10 ml.

Multiple Choice Questions (For CBSE-PMT Preliminary, AIIMS, AFMC, DPMT, CPMT, BHU and other Medical Entrance Examinations)

Question MCQ 1. Which of the following statements is most applicable to hydrogen? It can act (a) as a reducing agent (b) as an oxidising agent (c) both as oxidising and reducing agents (d) neither as an oxidising nor as a reducing agent.

Solution. Answer: (c).

Teacher's Note: H2 reduces CuO and is itself reduced by Na to NaH.

Exam Note: Quote both roles.

Question MCQ 2. Hydrogen combines with other elements by (a) losing an electron (b) gaining an electron (c) sharing an electron (d) losing, gaining and sharing of an electron.

Solution. Answer: (d).

Teacher's Note: Gives H+-type (oxides), H- (NaH) and covalent bonds (HCl).

Exam Note: All three modes qualify.

Question MCQ 3. The first ionization energy (kJ mol-1) for H, Li, F, Na has one of the following values: 1681, 520, 1312, 495. Which of these values corresponds to that of hydrogen? (a) 1681 (b) 1312 (c) 520 (d) 495.

Solution. Answer: (b). Hint: IE of H is more than that of alkali metals but less than that of F.

Teacher's Note: Li 520, Na 495 (alkali metals), F 1681 (most electronegative), so H is 1312.

Exam Note: Rank by group position.

Question MCQ 4. The correct increasing order of the acidity of CO2, H2O and H2O2 is (a) CO2 < H2O2 < H2O (b) H2O < H2O2 < CO2 (c) H2O < H2O2 > CO2 (d) H2O2 > CO2 > H2O.

Solution. Answer: (b). Hint: a stronger acid displaces a weaker acid from its salts: BaO2 + H2O + CO2 → BaCO3 + H2O2 (CO2 stronger acid, H2O2 weaker acid).

Teacher's Note: CO2 (as H2CO3) displaces H2O2 from BaO2; H2O2 is slightly more acidic than water.

Exam Note: Use displacement reaction as evidence.

Question MCQ 5. The volume of 10 volume H2O2 solution that decolourises 200 ml of 2N KMnO4 solution in acidic medium is (a) 112 ml (b) 336 ml (c) 200 ml (d) 224 ml.

Solution. Answer: (d) 224 ml. (Hint in the book: refer to Problem 1 on page 11/48: 10 volume = 10/5.6 N, so V = (2 × 200 × 5.6)/10 = 224 ml.)

Teacher's Note: Equivalents of H2O2 equal equivalents of KMnO4.

Exam Note: Convert 10 volume to N first.

Question MCQ 6. Which of the following metals cannot be used for liberating dihydrogen from dilute hydrochloric acid? (a) Zinc (b) Copper (c) Iron (d) Magnesium.

Solution. Answer: (b) Copper.

Teacher's Note: Copper lies below hydrogen in the electrochemical series.

Exam Note: Cite electrochemical series.

Question MCQ 7. Which of the following is used as a moderator in nuclear reactors? (a) Hard water (b) Heavy water (c) Deionized water (d) Mineral water.

Solution. Answer: (b) Heavy water.

Teacher's Note: D2O slows fission neutrons with little absorption.

Exam Note: Moderator means neutron slowing.

Question MCQ 8. The temporary hardness of water due to calcium bicarbonate can be removed by adding (a) CaCO3 (b) Ca(OH)2 (c) CaCl2 (d) HCl.

Solution. Answer: (b) Ca(OH)2.

Teacher's Note: Clark's method: Ca(HCO3)2 + Ca(OH)2 → 2CaCO3 + 2H2O.

Exam Note: Name Clark's process.

Question MCQ 9. In the calgon process of softening of water, which of the following is used? (a) Sodium polymetaphosphate (b) Hydrated sodium aluminium silicate (c) Cation exchange resins (d) Anion exchange resins.

Solution. Answer: (a) Sodium polymetaphosphate.

Teacher's Note: Calgon sequesters Ca2+, Mg2+ as soluble complexes; (b) is permutit.

Exam Note: Do not confuse with permutit.

Question MCQ 10. Hydrogen will not reduce (a) heated cupric oxide (b) heated ferric oxide (c) heated stannic oxide (d) heated aluminium oxide. (I.I.T. 1985)

Solution. Answer: (d). Hint: Al-O bond is very strong.

Teacher's Note: Al is highly electropositive, so its oxide resists reduction by H2.

Exam Note: Link to bond strength.

Question MCQ 11. The oxidation states exhibited by hydrogen in its various compounds are (a) -1 only (b) zero only (c) +1, -1 and zero (d) +1 only. (Ph. I.E.T. 1988)

Solution. Answer: (c).

Teacher's Note: +1 in HCl, -1 in NaH, 0 in H2.

Exam Note: Give one example each.

Question MCQ 12. The oxidation states of the most electronegative element in the products of the reaction, BaO2 with dil. H2SO4 are (a) 0 and -1 (b) -1 and -2 (c) -2 and 0 (d) -2 and +1. (I.I.T. 1991)

Solution. Answer: (b). Hint: BaO2 + H2SO4 → BaSO4 + H2O2.

Teacher's Note: Oxygen is -2 in BaSO4 and -1 in H2O2.

Exam Note: Identify products first.

Question MCQ 13. 30 volumes H2O2 means (a) 30% H2O2 (b) 30 cm3 of the solution contains 1 g of H2O2 (c) 1 cm3 of the solution liberates 30 cm3 of O2 at STP (d) 30 cm3 of the solution contain one mole of H2O2. (Haryana C.E.E.T. 1992)

Solution. Answer: (c).

Teacher's Note: Volume strength is O2 volume from unit volume at STP.

Exam Note: Definition, not percentage.

Question MCQ 14. An oxide which gives H2O2 on treatment with dilute acid is (a) PbO2 (b) Na2O2 (c) MnO2 (d) TiO2. (A.F.M.C. 1994)

Solution. Answer: (b) Na2O2.

Teacher's Note: Only true peroxides contain O22-; PbO2 and MnO2 are dioxides.

Exam Note: Peroxide versus dioxide.

Question MCQ 15. Nascent hydrogen consists of (a) Hydrogen atoms with excess energy (b) Hydrogen molecules with excess energy (c) Hydrogen ions in the excited state (d) Solvated protons. (A.I.I.M.S. 1994)

Solution. Answer: (b), as printed in the book (hint: Hydrogen molecules with excess energy).

Teacher's Note: Nascent hydrogen is H2 produced in situ with extra energy; the exact nature is debated.

Exam Note: Follow the book's key.

Question MCQ 16. The oxidation number of O in H2O2 is: (a) -2 (b) -1 (c) +1 (d) +2.

Solution. Answer: (b) -1.

Teacher's Note: Peroxide O-O bond; each O is -1 with H as +1.

Exam Note: Peroxide oxidation state is -1.

Question MCQ 17. The O-O-H bond angle in H2O2 is (a) 106° (b) 109° 28' (c) 120° (d) 94.8°.

Solution. Answer: (d) 94.8°.

Teacher's Note: Gas-phase H2O2 is non-planar with O-O-H angle 94.8°.

Exam Note: Remember 94.8° and dihedral 111.5°.

Question MCQ 18. Hydrolysis of one mole of peroxodisulphuric acid produces (a) two moles of sulphuric acid (b) two moles of peroxomonosulphuric acid (c) one mole of sulphuric acid and one mole of peroxomonosulphuric acid (d) one mole of sulphuric acid, one mole of peroxomonosulphuric acid and one mole of hydrogen peroxide. (I.I.T. 1996)

Solution. Answer: (c). Hint: HO-SO2-O-O-SO2-OH + H2O → HOSO2OH (sulphuric acid) + HOOSO2OH (permonosulphuric acid).

Teacher's Note: One step of hydrolysis breaks the O-S bond giving H2SO4 and H2SO5.

Exam Note: Complete hydrolysis would add H2O2.

Question MCQ 19. Which contains both polar and non-polar bonds? (a) NH4Cl (b) HCN (c) H2O2 (d) CH4. (I.I.T. 1997)

Solution. Answer: (c) H2O2. Hint: the O-O bond is non-polar while O-H bonds are polar.

Teacher's Note: O-O is between identical atoms so non-polar.

Exam Note: Look for same-atom bond.

Question MCQ 20. The critical temperature of water is higher than that of O2 because the H2O molecule has (a) fewer electrons than oxygen (b) two covalent bonds (c) V-shape (d) dipole moment. (I.I.T. 1997)

Solution. Answer: (d) dipole moment.

Teacher's Note: Polar H2O has strong intermolecular forces; non-polar O2 has weak ones.

Exam Note: Strong forces mean higher critical temperature.

Question MCQ 21. Among KO2, AlO2-, BaO2 and NO2+, unpaired electron is present in (a) NO2+ and BaO2 (b) KO2 and AlO2- (c) KO2 only (d) BaO2 only. (I.I.T. 1997)

Solution. Answer: (c) KO2 only. Hint: KO2 contains the superoxide ion O2- with an odd number of electrons (13), K+[:O-O:]-.

Teacher's Note: O2- has one unpaired electron; peroxide O22- has none.

Exam Note: Superoxide is paramagnetic.

Question MCQ 22. Which of the following statements is correct? (a) Hydrogen has same ionization potential as alkali metals (b) H- has same electronegativity as halogens (c) H- has oxidation number -1 (d) H- will not be liberated at anode. (A.F.M.C. 1997)

Solution. Answer: (c).

Teacher's Note: Hydride ion has -1 charge; H- is liberated at the anode on electrolysis of molten NaH.

Exam Note: Check (d) against molten hydride electrolysis.

Question MCQ 23. What is heavy water? (a) H218O (b) H216O (c) H2O3 (d) D2O. (A.F.M.C. 1997)

Solution. Answer: (d) D2O.

Teacher's Note: Heavy water has deuterium, not heavier oxygen.

Exam Note: Deuterium oxide.

Question MCQ 24. The high density of water as compared to ice is due to (a) hydrogen bonding interactions (b) dipole-dipole interactions (c) dipole-induced dipole interactions (d) induced dipole-induced dipole interactions. (C.B.S.E. P.M.T. 1997)

Solution. Answer: (a).

Teacher's Note: Open cage structure of ice due to H-bonding collapses on melting.

Exam Note: H-bond cage in ice.

Question MCQ 25. The volume strength of 1.5 N H2O2 solution is (a) 4.8 (b) 5.2 (c) 8.8 (d) 8.4. (I.I.T. 1991, C.B.S.E. P.M.T. 1997)

Solution. Answer: (d) 8.4. Hint: multiply normality by 5.6, i.e. 5.6 × 1.5 = 8.4.

Teacher's Note: Volume strength = 5.6 × N.

Exam Note: Use the 5.6 factor.

Question MCQ 26. The hydride ion H- is a stronger base than hydroxide ion. Which of the following reactions will occur if sodium hydride (NaH) is dissolved in water? (a) H-(aq) + H2O(l) → H3O+(aq) (b) H-(aq) + H2O(l) → OH-(aq) + H2(g) (c) H- + H2O → no reaction (d) None of these. (C.B.S.E. P.M.T. 1997)

Solution. Answer: (b).

Teacher's Note: H- deprotonates water, giving OH- and H2.

Exam Note: Stronger base takes proton.

Question MCQ 27. When a substance A reacts with water, it produces a combustible gas B and a solution of substance C in water. When another substance D reacts with this solution of C, it produces the same gas B on warming but D can produce gas B on reaction with dilute sulphuric acid at room temperature. A imparts a deep golden yellow colour to a smokeless flame of Bunsen burner. A, B, C and D respectively are: (a) Na, H2, NaOH, Zn (b) K, H2, KOH, Al (c) Ca, H2, Ca(OH)2, Sn (d) CaC2, C2H2, Ca(OH)2, Fe. (C.B.S.E. P.M.T. 1998)

Solution. Answer: (a). Hint: 2Na + 2H2O → H2 + 2NaOH (A, B, C); and Zn + 2NaOH → Na2ZnO2 + H2 (D, C, B).

Teacher's Note: Golden yellow flame means sodium; zinc is amphoteric.

Exam Note: Flame colour fixes A.

Question MCQ 28. Which of the following pairs of substances on reaction will not evolve H2 gas? (a) Fe and H2SO4 (aqueous) (b) Copper and HCl (aqueous) (c) Sodium and ethyl alcohol (d) Iron and steam. (C.B.S.E. P.M.T. 1998)

Solution. Answer: (b).

Teacher's Note: Copper is below hydrogen in the reactivity series and does not displace H2 from HCl.

Exam Note: Use reactivity series.

Question MCQ 29. Acidified solution of chromic acid on treatment with H2O2 yields (a) CrO3 + H2O + O2 (b) Cr2O3 + H2O + O2 (c) CrO5 + H2O (d) H2Cr2O7 + H2O + O2. (M.P.C.B.E. 1999)

Solution. Answer: (c) CrO5 + H2O.

Teacher's Note: This is the blue-coloured peroxide test for chromates/dichromates.

Exam Note: Blue chromium pentoxide.

Question MCQ 30. Amongst H2O, H2S, H2Se and H2Te, the one with the highest boiling point is (a) H2O because of hydrogen bonding (b) H2Te because of higher molecular weight (c) H2S because of hydrogen bonding (d) H2Se because of lower molecular weight. (I.I.T. 2000)

Solution. Answer: (a).

Teacher's Note: Strong H-bonding in water outweighs the molar-mass trend.

Exam Note: Reason must be H-bonding.

Question MCQ 31. Para and ortho hydrogen differ in (a) atomic number (b) atomic mass (c) spins of protons (d) number of neutrons. (A.F.M.C. 2001)

Solution. Answer: (c).

Teacher's Note: Ortho: parallel proton spins; para: antiparallel.

Exam Note: Nuclear spin isomers.

Question MCQ 32. Heavy water is obtained by (a) boiling water (b) fractional distillation of H2O (c) prolonged electrolysis of H2O (d) heating H2O2. (A.F.M.C. 2001)

Solution. Answer: (c) prolonged electrolysis of H2O.

Teacher's Note: H2O electrolyses faster, leaving D2O enriched.

Exam Note: Prolonged electrolysis.

Question MCQ 33. Polyphosphates are used as water softening agents because they (a) form soluble complexes with anionic species (b) precipitate anionic species (c) form soluble complexes with cationic species (d) precipitate cationic species. (I.I.T. 2002)

Solution. Answer: (c). Hint: 2Ca2+ + Na2[Na4(PO3)6] → 4Na+ + Na2[Ca2(PO3)6] (soluble complex). Sodium hexametaphosphate (calgon) combines with Ca2+, Mg2+ to form soluble complexes.

Teacher's Note: Calgon sequesters hardness cations without precipitation.

Exam Note: Soluble complex with Ca2+.

Question MCQ 34. Action of water or dilute mineral acids on metals can give (a) monohydrogen (b) tritium (c) dihydrogen (d) trihydrogen (e) D2. (Kerala M.E.E. 2002)

Solution. Answer: (c) dihydrogen.

Teacher's Note: Metal + acid gives H2, not other isotopic forms.

Exam Note: Dihydrogen, H2.

Question MCQ 35. Which one of the following processes will produce permanent hard water? (a) Addition of Na2SO4 to water (b) Saturation of water with CaCO3 (c) Saturation of water with MgCO3 (d) Saturation of water with CaSO4. (A.I.E.E.E. 2003)

Solution. Answer: (d). Hint: saturation of water with CaSO4 produces hardness.

Teacher's Note: Permanent hardness is from chlorides and sulphates of Ca/Mg; carbonates give temporary hardness.

Exam Note: Sulphates mean permanent hardness.

Question MCQ 36. The reagent commonly used to determine hardness of water titrimetrically is (a) oxalic acid (b) disodium salt of EDTA (c) sodium citrate (d) sodium thiosulphate. (A.I.E.E.E. 2003)

Solution. Answer: (b) disodium salt of EDTA.

Teacher's Note: EDTA forms stable complexes with Ca2+ and Mg2+.

Exam Note: Complexometric titration.

Question MCQ 37. The structure of H2O2 is (a) planar (b) non-planar (c) spherical (d) linear. (C.B.S.E. P.M.T. 1999)

Solution. Answer: (b) non-planar.

Teacher's Note: Open-book structure with dihedral angle 111.5° in the gas phase.

Exam Note: Say open book.

Question MCQ 38. H2O2 acts as an oxidising agent in (a) neutral medium (b) acidic medium (c) alkaline medium (d) alkaline and neutral medium (e) acidic and alkaline medium. (Kerala M.E.E. 2004, A.F.M.C. 2004)

Solution. Answer: (e) acidic and alkaline medium.

Teacher's Note: It oxidises in both acid (Fe2+) and alkali (Cr3+) media.

Exam Note: Two equations support the answer.

Question MCQ 39. Commercial 11.2 volume H2O2 solution has a molarity of (a) 1.0 (b) 0.5 (c) 11.2 (d) 1.12 (e) 0.75. (Kerala E.E.E. 2004)

Solution. Answer: (a) 1.0. Hint: molarity = volume strength/11.2 = 11.2/11.2 = 1.0.

Teacher's Note: 1 M H2O2 = 34 g/L, giving 11.2 L O2.

Exam Note: Use 11.2 factor.

Additional Questions for All Competitive Examinations - Assertion-Reason Type Questions

Question A-R 1. Assertion: Water is a good solvent for ionic compounds but poor for covalent compounds. Reason: Hydration energy of ions releases sufficient energy to overcome lattice energy and break hydrogen bonds in water while covalently bonded compounds interact so weakly that even van der Waals' forces between molecules of covalent compounds cannot be broken. (Options: (a) both true, Reason is correct explanation; (b) both true, Reason is not a correct explanation; (c) Assertion true, Reason false; (d) both false.)

Solution. Answer: (a).

Teacher's Note: Hydration energy pays for lattice and H-bond breaking in ionic solutes only.

Exam Note: Say both true and explanatory.

Question A-R 2. Assertion: H2O2 liberates O2 when it reacts with acidified KMnO4 solution. Reason: KMnO4 oxidises H2O2 to O2.

Solution. Answer: (a).

Teacher's Note: H2O2 reduces MnO4- to Mn2+ and is oxidised to O2.

Exam Note: Reason explains assertion directly.

Question A-R 3. Assertion: H2O2 has higher boiling point than water. Reason: The dipole moment of H2O2 is little more than that of H2O.

Solution. Answer: (b). Correct explanation: the extent of H-bonding in H2O2 is higher than that in H2O.

Teacher's Note: Both statements true, but extent of H-bonding is the cause.

Exam Note: Dipole moment is not the main reason.

Question A-R 4. Assertion: Beryllium hydride is a covalent hydride. Reason: The electronegativity difference between Be and H is very high.

Solution. Answer: (c). Correct reason: the electronegativity difference between Be (1.5) and H (2.1) is small.

Teacher's Note: Assertion true, reason false: small difference gives covalent character.

Exam Note: Quote Be 1.5 and H 2.1.

Question A-R 5. Assertion: D2O is called heavy water. Reason: Its degree of dissociation is high.

Solution. Corrected: Answer (c). The book's answer key prints (d), but its own hint states that the assertion is correct (D2O is called heavy water) and the reason is wrong: due to stronger D-O bonds, the degree of dissociation of D2O is lower than that of H2O. So Assertion is true and Reason is false, which is option (c).

Teacher's Note: D2O dissociates less than H2O because D-O bonds are stronger.

Exam Note: Assertion true, reason false.

Question A-R 6. Assertion: The O-O bond length in H2O2 is shorter than that of O2F2. Reason: H2O2 is an ionic compound. (A.I.I.M.S. 2003)

Solution. Answer: (d). Correct assertion: the O-O bond length in H2O2 is much longer than that of O2F2. The lone pairs on the O atoms are strongly attracted by the electronegative F atoms, so lone pair-lone pair repulsion of the two oxygen atoms is far less in O2F2 than in H2O2; as a result the O-O bond length in O2F2 (1.22 Å) is much shorter than in H2O2 (1.48 Å). The reason is also false since H2O2 is covalent.

Teacher's Note: Both statements false: O-O is 1.48 Å in H2O2 but 1.22 Å in O2F2.

Exam Note: Both false, option (d).

True/False Statements

Question T/F 1. Water can act as an oxidising as well as a reducing agent.

Solution. True.

Teacher's Note: Water is reduced to H2 by Na and oxidised to O2 by F2.

Exam Note: Cite both reactions.

Question T/F 2. Sequestration of Ca2+ and Mg2+ ions present in hard water is carried out by using zeolites.

Solution. False. Sodium polymetaphosphate (calgon) is used for sequestration.

Teacher's Note: Zeolites exchange ions; sequestration is complexation by calgon.

Exam Note: Distinguish exchange from sequestration.

Question T/F 3. Complete hydrolysis of one mole of peroxodisulphuric acid gives one mole of H2O2 and two moles of H2SO4.

Solution. True.

Teacher's Note: H2S2O8 + 2H2O → 2H2SO4 + H2O2 via H2SO5.

Exam Note: Industrial route to H2O2.

Question T/F 4. During electrolysis of aqueous hydrochloric acid, dihydrogen is liberated at the anode.

Solution. False. Dihydrogen is liberated at the cathode.

Teacher's Note: Cations are reduced at the cathode; H+ gives H2 there.

Exam Note: Cathode reduction, anode oxidation.

Question T/F 5. When treated with H2O2, lead dioxide is reduced to lead metal.

Solution. False. PbO2 is reduced to PbO (lead monoxide), not to the metal.

Teacher's Note: H2O2 is a mild reductant here: PbO2 + H2O2 → PbO + H2O + O2.

Exam Note: Product is PbO.

Question T/F 6. In copper sulphate pentahydrate, all the water molecules are attached to the Cu2+ ion by coordinate covalent bonds.

Solution. False. Four water molecules are bonded to Cu2+ by coordinate bonds while the fifth one is bonded to the SO42- ion by H-bonds.

Teacher's Note: [Cu(H2O)4]SO4·H2O has one lattice water.

Exam Note: Four coordinated plus one H-bonded.

Question T/F 7. Zinc hydroxide dissolves in excess of NaOH solution to evolve dihydrogen gas.

Solution. False. Zn(OH)2 + 2NaOH → Na2ZnO2 + 2H2O (no H2 is evolved; zinc metal, not the hydroxide, evolves H2).

Teacher's Note: Zn(OH)2 is amphoteric; it dissolves by acid-base reaction.

Exam Note: Distinguish Zn metal from Zn(OH)2.

Question T/F 8. Lead dioxide on reaction with dil. H2SO4 gives H2O2.

Solution. False. PbO2 is not a peroxide since it does not contain the -O-O- ion and hence it does not evolve H2O2 on treatment with dil. H2SO4.

Teacher's Note: In PbO2 each O is -2 and Pb is +4.

Exam Note: Dioxide differs from peroxide.

Question T/F 9. Deuterium is an isomer of protium.

Solution. False. Deuterium is an isotope of protium.

Teacher's Note: Same atomic number, different mass number.

Exam Note: Isotope, not isomer.

Question T/F 10. Water cannot be used to extinguish petrol fire.

Solution. True. Being lighter, petrol floats over water.

Teacher's Note: Burning petrol spreads on top of water.

Exam Note: Reason: petrol floats.

Fill in the Blanks

Question FIB 1. Dihydrogen acts as a reducing agent in its reaction with ........... while it acts as an oxidising agent in its reaction with ........... .

Solution. Heated CuO or Fe3O4; Na or Ca.

Teacher's Note: Reducing with metal oxides; oxidising with active metals.

Exam Note: One example each.

Question FIB 2. In the reaction of F2 with H2O, water acts as a ........... . (I.I.T. 1987)

Solution. Reducing agent.

Teacher's Note: F2 oxidises water to O2, as fluorine is the strongest oxidant.

Exam Note: Water is oxidised.

Question FIB 3. The bleaching action of hydrogen peroxide is due to ........... .

Solution. Nascent oxygen.

Teacher's Note: H2O2 → H2O + [O]; the [O] oxidises colouring matter.

Exam Note: Oxidative bleaching.

Question FIB 4. Temporary hardness of water is due to ........... .

Solution. Bicarbonates of Ca2+ and Mg2+.

Teacher's Note: Removed by boiling or by Clark's method.

Exam Note: Name both bicarbonates.

Question FIB 5. Hydrogen peroxide turns starch-potassium iodide paper blue due to the liberation of ........... .

Solution. I2.

Teacher's Note: Iodine forms a blue complex with starch.

Exam Note: Name iodine.

Question FIB 6. The chemical formula of permutit is ........... .

Solution. Na2Al2Si2O8·xH2O.

Teacher's Note: Hydrated sodium aluminium silicate, an ion exchanger.

Exam Note: Write the formula with xH2O.

Question FIB 7. Hydrogen gas is liberated by the action of aluminium with a concentrated solution of ........... . (I.I.T. 1987)

Solution. Sodium hydroxide.

Teacher's Note: 2Al + 2NaOH + 2H2O → 2NaAlO2 + 3H2.

Exam Note: Al is amphoteric.

Question FIB 8. The electrolysis of molten sodium hydride liberates ........... gas at the anode. (I.I.T. 1989)

Solution. Dihydrogen.

Teacher's Note: H- is oxidised at the anode: 2H- → H2 + 2e-.

Exam Note: Proof of the H- ion.

Question FIB 9. Calgon is the trade name of ........... .

Solution. Sodium hexametaphosphate.

Teacher's Note: Na6P6O18, a water softener.

Exam Note: Name the compound.

Question FIB 10. Hydrogen has ........... isotopes and ........... nuclear isomers.

Solution. Three (H, D, T); two (ortho and para).

Teacher's Note: Isotopes differ in neutrons; spin isomers in proton spin alignment.

Exam Note: Three and two.

Matching Type Questions

Question Match 1. Match items of column I with appropriate items of column II. Column I: 1. Deuterates are salts with. Column II: (c) D2O as water of crystallization.

Solution. 1 → (c).

Teacher's Note: Deuterates contain D2O of crystallisation in place of H2O.

Exam Note: Match by definition.

Question Match 2. Column I: 2. Cation exchange resins contain. Column II options: (a) Dihydrogen (b) Nuclear reactors (c) D2O as water of crystallization (d) Sod. polymetaphosphate (e) Non stoichiometric (f) acidic groups such as -COOH and -SO3H.

Solution. 2 → (f).

Teacher's Note: Cation resins are acidic polymers that exchange H+ for metal cations.

Exam Note: Acidic groups.

Question Match 3. Column I: 3. Palladium hydride. Column II: as in the list above.

Solution. 3 → (e) non stoichiometric.

Teacher's Note: Pd absorbs H2 to give variable composition.

Exam Note: Non-stoichiometric interstitial hydride.

Question Match 4. Column I: 4. Zn dissolves in NaOH. Column II: as in the list above.

Solution. 4 → (a) dihydrogen.

Teacher's Note: Zn + 2NaOH → Na2ZnO2 + H2.

Exam Note: Gas evolved is H2.

Question Match 5. Column I: 5. Calgon. Column II: as in the list above.

Solution. 5 → (d) sod. polymetaphosphate.

Teacher's Note: Calgon is the trade name of sodium hexametaphosphate.

Exam Note: Trade name to compound.

Question Match 6. Column I: 6. Heavy water. Column II: as in the list above.

Solution. 6 → (b) nuclear reactors.

Teacher's Note: D2O is the moderator in nuclear reactors.

Exam Note: Moderator use.

Class 11 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 11 Hydrogen Part 2

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 11 Hydrogen Part 2

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 11 Hydrogen Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for Class 11

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for Class 11 Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.