Download Class 11 Chemistry Pradeep's KL Gogia Textbook Solutions: Chapter 12 S Block Elements
Explore reliable textbook solutions for Chapter 12 S Block Elements tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Pradeep's KL Gogia Textbook Answers and Solutions
Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
S Block Elements - Pages 12/32 to 12/62
Conceptual Questions
Question 1. Sodium fire in the laboratory should not be extinguished by pouring water. Why?
Solution. Sodium reacts violently with water producing H2 gas which also catches fire. As a result, the fire spreads rather than being extinguished. Therefore, H2O should not be used for extinguishing sodium fire. Instead pyrene (CCl4) should be used.
Teacher's Note: Na + H2O gives flammable H2; water feeds the fire.
Exam Note: Name the gas formed and the safe extinguisher.
Question 2. Why does table salt get wet in rainy season?
Solution. Pure NaCl is not hygroscopic but table salt is impure NaCl containing impurities of Na2SO4, CaSO4, MgCl2 and CaCl2. All of these being hygroscopic absorb moisture from air in rainy season. As a result, table salt gets wet.
Teacher's Note: Deliquescent impurities, not NaCl itself, absorb atmospheric moisture.
Exam Note: Mention MgCl2/CaCl2 impurities for full marks.
Question 3. Alkali metals are paramagnetic but their salts are diamagnetic. Explain.
Solution. Alkali metals contain one unpaired electron (ns1) and hence are paramagnetic. However, during salt formation, this unpaired electron is transferred to the non-metallic atom forming its anion. As a result, salt has paired electrons both in the cation as well as in the anion and hence alkali metal salts are diamagnetic in nature.
Teacher's Note: Magnetism depends on unpaired electrons; ionisation removes the ns1 electron.
Exam Note: State ns1 unpaired versus all paired in ions.
Question 4. Which out of sodium or potassium has higher melting point?
Solution. On going from Na to K, the size of the atom increases and hence the metallic bonding weakens. In other words sodium has higher melting point than potassium because of stronger metallic bonding.
Teacher's Note: Smaller atoms give stronger metallic bonding, hence higher melting point.
Exam Note: Link size to metallic bond strength.
Question 5. Why cesium can be used in photoelectric cell while lithium cannot be?
Solution. Cesium has the lowest while lithium has the highest ionization enthalpy. Hence Cs can lose electrons very easily while lithium cannot.
Teacher's Note: Low ionisation enthalpy allows photoemission with visible light.
Exam Note: Compare lowest versus highest ionisation enthalpy.
Question 6. Why do alkali metals impart colour to the flame?
Solution. Alkali metals have low ionization enthalpies. Their valence electrons easily absorb energy from the flame and are excited to higher energy levels. When these electrons return to the ground state, the energy is emitted in form of light.
Teacher's Note: Excitation then de-excitation emits visible radiation in the flame.
Exam Note: Write excitation and emission steps in order.
Question 7. Why alkali metals are normally kept in kerosene oil?
Solution. This is because in the air they are easily oxidized to oxides which may dissolve in the moisture of the air to form hydroxides, they also combine directly with water vapours present in moisture to form hydroxides.
Teacher's Note: Kerosene excludes air and moisture from highly reactive metals.
Exam Note: Mention oxidation and reaction with moisture.
Question 8. Among alkali metals in aqueous solution, Li+ ion has the lowest mobility. Why?
Solution. Because of smallest size among alkali metals, Li+ ions are most highly hydrated in aqueous solution. As a result, among alkali metals, mass of hydrated lithium ion is the highest and thus has lowest ionic mobility.
Teacher's Note: Smallest bare ion has largest hydrated radius, so it moves slowest.
Exam Note: Hydration extent, not bare size, decides mobility.
Question 9. Lithium has highest ionization enthalpy in group I elements, yet it is the strongest reducing agent. Why?
Solution. This is because lithium has the highest oxidation potential.
Teacher's Note: In water, high hydration enthalpy of Li+ outweighs ionisation enthalpy.
Exam Note: Cite oxidation potential and hydration energy.
Question 10. Give reasons for the following: (i) LiCl is more covalent than KCl. (ii) LiI has lower melting point than LiF. (iii) MgCl2 is more covalent than NaCl. (iv) CuCl is more covalent than NaCl.
Solution. (i) Due to smaller size, Li+ is more polarising than K+ and hence LiCl is more covalent than KCl. (The book prints "Na+ ... NaCl" here; Corrected to K+ and KCl to match the question.) (ii) Due to bigger size, I- is more polarizable than F- and hence LiI is more covalent than LiF. (iii) Due to higher charge, Mg2+ is more polarising than Na+ and hence MgCl2 is more covalent than NaCl. (iv) Due to pseudo inert gas configuration, Cu+ is more polarising than Na+ and hence CuCl is more covalent than NaCl.
Teacher's Note: Apply Fajans rules: small, highly charged cation and large anion raise covalent character.
Exam Note: Quote Fajans rule for each part.
Question 11. What makes lithium to show properties uncommon to the rest of the alkali metals? (N.C.E.R.T.)
Solution. The unusual properties of lithium as compared to other alkali metals is due to (i) the exceptionally small size of its atom and ion and (ii) high polarizing power (charge/size ratio).
Teacher's Note: Small size gives high charge density, hence anomalous covalent behaviour.
Exam Note: Give both reasons: size and polarising power.
Question 12. When is a cation highly polarising? Which alkali metal has the highest polarizing power? (N.C.E.R.T.)
Solution. A cation is highly polarising if its charge/size ratio is very high. Li+ ion has the highest polarizing power among the alkali metal ions.
Teacher's Note: Polarising power rises with charge and falls with ionic size.
Exam Note: Define via charge/size ratio.
Question 13. The enthalpy of formation of hypothetical CaCl(s) is theoretically found to be -188 kJ mol-1 and ΔfH° for CaCl2(s) is -795 kJ mol-1. Calculate ΔfH° for the disproportionation reaction 2 CaCl(s) → CaCl2(s) + Ca(s). (N.C.E.R.T.)
Solution. ΔfH° for the above reaction = ΔfH° (products) - ΔfH° (reactants) = ΔfH°(CaCl2) + ΔfH°(Ca) - 2 ΔfH°(CaCl) = -795 + 0 - 2 × (-188) kJ mol-1 = -419 kJ mol-1. (Check: -795 + 376 = -419.)
Teacher's Note: Elements in standard state have zero formation enthalpy; products minus reactants.
Exam Note: Show substitution; strongly negative means CaCl disproportionates.
Question 14. Why does the reaction >C-Cl + MF → >C-F + MCl proceed better with KF than with NaF? (N.C.E.R.T.)
Solution. The standard enthalpies of formation of alkali metal chlorides become more and more negative as we move down the group, i.e. ΔfH° of KCl is more negative (-428 kJ mol-1) than that of NaCl (-400 kJ mol-1). Therefore, the above reaction proceeds better with KF than with NaF.
Teacher's Note: More negative ΔfH of KCl drives the exchange forward.
Exam Note: Compare formation enthalpies of KCl and NaCl.
Question 15. Why is it that on being heated in excess supply of air, K, Rb and Cs form superoxides in preference to oxides and peroxides? (N.C.E.R.T.)
Solution. K+, Rb+ and Cs+ are large cations and superoxide (O2-) is larger than oxide (O2-) and peroxide (O22-) ion. Since a large cation stabilizes a large anion, therefore, these metals form superoxides in preference to oxides and peroxides.
Teacher's Note: Large cation stabilises large anion through better lattice energy.
Exam Note: State "large cation stabilises large anion".
Question 16. Why solutions of alkali metals in liquid ammonia are conducting, paramagnetic and blue in colour? (P.S.B. 1991 S)
Solution. Book only says: Refer to Sec. 12.5.7 on page 12/9. Corrected (answer supplied): alkali metals dissolve in liquid ammonia giving M+ and ammoniated electrons, M + (x+y) NH3 → [M(NH3)x]+ + [e(NH3)y]-. The ammoniated electrons absorb light in the visible region (red), giving blue colour; they are free to move, so the solution conducts; and the unpaired electrons make it paramagnetic.
Teacher's Note: Ammoniated electrons give blue colour, paramagnetism and conductance.
Exam Note: Mention ammoniated electrons.
Question 17. Magnesium metal burns in air to give a white ash. When this ash is treated with water, the odour of ammonia can be detected. Explain.
Solution. Mg burns in air to form MgO and Mg3N2. 2 Mg + O2 → 2 MgO ; 3 Mg + N2 → Mg3N2. Magnesium nitride on hydrolysis with H2O gives NH3. Mg3N2 + 6 H2O → 3 Mg(OH)2 + 2 NH3
Teacher's Note: The white ash contains Mg3N2, which hydrolyses to NH3.
Exam Note: Give both combustion equations and the hydrolysis.
Question 18. Why is calcium preferred over sodium to remove last traces of moisture from alcohol?
Solution. Both Na and Ca react with water to form their respective hydroxides. But Na readily reacts with alcohol to form sodium ethoxide but Ca reacts only very slowly. 2 C2H5OH + 2 Na → 2 C2H5ONa + H2. Therefore, Ca is preferred over Na to remove the last traces of moisture from alcohol.
Teacher's Note: Na would consume the alcohol itself; Ca reacts slowly with alcohol.
Exam Note: Write the Na-ethanol equation.
Question 19. What is the difference between milk of lime and lime water?
Solution. A suspension of slaked lime, i.e., Ca(OH)2 in water is called milk of lime but a clear decanted solution of slaked lime in water is called lime water.
Teacher's Note: Milk of lime is a suspension; lime water is the clear filtrate.
Exam Note: Suspension versus clear solution.
Question 20. A piece of burning magnesium ribbon continues to burn in sulphur dioxide. Explain.
Solution. A piece of magnesium ribbon continues to burn in SO2 since it reacts to form MgO and S. 2 Mg + SO2 → 2 MgO + S (heat). This reaction is so much exothermic that heat evolved keeps the magnesium ribbon burning.
Teacher's Note: Strongly exothermic reaction sustains burning; Mg reduces SO2.
Exam Note: Write equation and note exothermic nature.
Question 21. Alkaline earth metals always form divalent cations even though their second ionization enthalpies are almost double that their first ionization enthalpies. Explain.
Solution. The higher enthalpy of lattice formation by M2+ ions more than compensates the higher second ionization enthalpy of metals.
Teacher's Note: Greater lattice energy of M2+ compounds outweighs the second ionisation cost.
Exam Note: Mention lattice enthalpy compensation.
Question 22. Halides of Be dissolve in organic solvents while those of Ba do not. Why is it so?
Solution. Halides of Be are covalent because of high IE of Be while those of Ba are ionic due to low IE of Ba.
Teacher's Note: Covalent BeX2 dissolves in organic solvents; ionic BaX2 does not.
Exam Note: Covalent versus ionic character is the key.
Question 23. Explain why halides of beryllium fume in moist air but other alkaline earth metal halides do not. (P.S.B. 1992)
Solution. BeCl2 being a salt of a weak base, Be(OH)2 and a strong acid, HCl undergoes hydrolysis by water to form HCl which fumes in air. BaCl2, on the other hand, being salt of a strong base, Ba(OH)2 and strong acid, HCl does not undergo hydrolysis by water to form HCl and hence does not fume in air. BeCl2 + 2 H2O → Be(OH)2 + 2 HCl ; BaCl2 + H2O does not give Ba(OH)2 + 2 HCl.
Teacher's Note: Hydrolysis of salt of weak base releases HCl fumes.
Exam Note: Give hydrolysis equation of BeCl2.
Question 24. Why Be and Mg do not give characteristic colour to the flame whereas other alkaline earth metals do give. (H.P.S.B. 1993)
Solution. Be and Mg have high ionization enthalpies and hence their valence electrons are not easily excited.
Teacher's Note: High ionisation enthalpy prevents excitation by the cool Bunsen flame.
Exam Note: Relate flame test to ease of excitation.
Question 25. Why superoxides of alkali metals are paramagnetic while normal oxides are diamagnetic?
Solution. Superoxides contain the ion O2- which has the structure (:O···O:)- containing a three electron bond, i.e., it has one unpaired electron and hence is paramagnetic. Normal oxides containing the ion O2- do not have any unpaired electrons and hence are diamagnetic.
Teacher's Note: O2- has one unpaired electron; O2- has none.
Exam Note: Count unpaired electrons in each anion.
Very Short Answer Questions (1 mark)
Question 1. Name the alkali metals which form superoxides when heated in excess of air? (N.C.E.R.T.)
Solution. K, Rb and Cs.
Teacher's Note: Large cations stabilise the large superoxide ion.
Exam Note: Answer with three symbols.
Question 2. Name the metal which floats on water without any apparent reaction with it. (N.C.E.R.T.)
Solution. Li.
Teacher's Note: Li is least dense metal and reacts only mildly with water.
Exam Note: One-word answer: Li.
Question 3. Name the chief factor responsible for the anomalous behaviour of lithium. (N.C.E.R.T.)
Solution. Small size, high electronegativity and high ionization enthalpy.
Teacher's Note: Small size gives high polarising power, hence diagonal resemblance with Mg.
Exam Note: List size as the main factor.
Question 4. Name the element which is invariably bivalent and whose oxide is soluble in excess of NaOH and its dipositive ion has noble gas core. (N.C.E.R.T.)
Solution. Be ; BeO dissolves in alkali to form beryllates.
Teacher's Note: Amphoteric BeO + 2 NaOH gives Na2BeO2 (sodium beryllate).
Exam Note: Name Be and amphoteric oxide.
Question 5. Mention the main constituents of Portland cement? (N.C.E.R.T.)
Solution. Dicalcium silicate, tricalcium silicate and tricalcium aluminate.
Teacher's Note: Calcium silicates and aluminate set and harden cement.
Exam Note: Name the three calcium compounds.
Question 6. Draw the structure of (i) BeCl2 (vapour) (ii) BeCl2 (s). (N.C.E.R.T.)
Solution. Refer to the text. (The structures are drawn in the book text: BeCl2 vapour is a chlorine-bridged dimer, and solid BeCl2 is a polymeric chain with bridging chlorines, each Be tetrahedral.)
Teacher's Note: Bridging Cl atoms give Be electron-pair acceptance; vapour dimer, solid chain.
Exam Note: Draw bridged dimer and chain structure.
Question 7. What happens when KO2 reacts with water? Write the balance chemical equation for the reaction. (N.C.E.R.T.)
Solution. 2 KO2 + 2 H2O → 2 KOH + H2O2 + O2.
Teacher's Note: Superoxide gives KOH, H2O2 and O2.
Exam Note: Balance atoms: 2 K, 6 O, 4 H.
Question 8. Predict giving reason the outcome of the reaction, LiI + KF → (N.C.E.R.T.)
Solution. LiI + KF → LiF + KI ; larger cation stabilizes larger anion.
Teacher's Note: Small Li+ pairs with small F-; large K+ with large I-.
Exam Note: Quote "large cation stabilises large anion".
Question 9. Name one reagent or one operation to distinguish between (i) BeSO4 and BaSO4 (ii) Be(OH)2 and Ba(OH)2 (N.C.E.R.T.)
Solution. (i) BeSO4 is soluble in H2O while BaSO4 is not (ii) Be(OH)2 dissolves in alkali but Ba(OH)2 does not.
Teacher's Note: Amphoteric Be(OH)2 dissolves in NaOH; solubility trend down the group.
Exam Note: Name one test per pair.
Question 10. Why does beryllium show similarities with aluminium? (N.C.E.R.T.)
Solution. Due to same electronegativity (1.5) and very similar polarizing power (Be2+ = 0.064 and Al3+ = 0.060) of their ions.
Teacher's Note: Diagonal relationship: similar charge/size ratio and electronegativity.
Exam Note: Quote the polarising power values.
Question 11. Arrange the following in order of the increasing covalent character: MCl, MBr, MF, MI (where M = alkali metal). (N.C.E.R.T.)
Solution. As the size of the anion increases, covalent character increases and hence the order is MF < MCl < MBr < MI.
Teacher's Note: Larger anion is more polarisable, hence more covalent character (Fajans).
Exam Note: State the order with reason.
Question 12. What is the general name for elements of group I?
Solution. Alkali metals.
Teacher's Note: Group 1 hydroxides are strongly alkaline.
Exam Note: One-word answer.
Question 13. Which alkali metal is radioactive? Give its atomic number also. (H.P.S.B. 2004)
Solution. Fr, Z = 87.
Teacher's Note: Francium is the radioactive last member of group 1.
Exam Note: Give symbol and Z.
Question 14. Name the alkali metal which shows diagonal relationship with magnesium.
Solution. Li.
Teacher's Note: Li and Mg: similar charge/size ratio.
Exam Note: Li with Mg; Be with Al.
Question 15. Which alkali metal acts as the strongest reducing agent in aqueous solution?
Solution. Li.
Teacher's Note: Highest hydration enthalpy gives the most negative E° for Li.
Exam Note: Li, due to hydration energy.
Question 16. Name the alkaline earth metal which forms covalent compounds.
Solution. Be.
Teacher's Note: Small size and high charge density of Be2+ polarise anions.
Exam Note: Be, by Fajans rules.
Question 17. Which alkaline earth metal is radioactive?
Solution. Ra.
Teacher's Note: Radium is the last, radioactive, member of group 2.
Exam Note: Answer: Ra.
Question 18. Name the alkaline earth metal hydroxide which is amphoteric.
Solution. Be(OH)2.
Teacher's Note: Be(OH)2 reacts with both acids and bases.
Exam Note: Be(OH)2 dissolves in NaOH giving beryllate.
Question 19. Why do the elements of second row (first short period) show a number of differences in properties from other members of their respective families?
Solution. The difference in the properties of the first member of a group from those of the other members is due to (i) smaller size of the atom (ii) presence of one inner shell of only two electrons and (iii) absence of d-orbitals.
Teacher's Note: Small size, high charge density and no d-orbitals explain anomalous behaviour.
Exam Note: List the three reasons.
Question 20. What is diagonal relationship due to?
Solution. Similar size of atoms or ions, similar electronegativity or similar polarizing power.
Teacher's Note: Diagonal pairs have similar charge/size ratio.
Exam Note: Give similar polarising power.
Question 21. Why alkaline earth metals have a greater tendency to form complexes than the alkali metals.
Solution. Due to higher nuclear charge.
Teacher's Note: Smaller size and higher charge attract ligands more strongly.
Exam Note: Higher charge density is the key.
Question 22. Alkali and alkaline earth metals cannot be obtained by chemical reduction method. Explain.
Solution. Since they are themselves stronger reducing agents than majority of the common reducing agents.
Teacher's Note: Highly electropositive metals; electrolysis of fused salts is used instead.
Exam Note: Say they are stronger reducers than reagents.
Question 23. Why does table salt get wet in rainy season?
Solution. Table salt contains impurities of CaCl2 and MgCl2 which being deliquescent compounds absorb moisture from the air in rainy season.
Teacher's Note: Pure NaCl is not deliquescent; its impurities are.
Exam Note: Name CaCl2 and MgCl2 impurities.
Question 24. Why is sodium metal kept under kerosene oil?
Solution. Na metal is highly reactive and combines with moisture, O2 and CO2 of the air forming NaOH, Na2O and Na2CO3 etc. Therefore, to protect Na from moisture and air, it is kept under kerosene oil.
Teacher's Note: Kerosene is an inert barrier to air and moisture.
Exam Note: Mention reaction with moisture and oxygen.
Question 25. What are the raw materials used for the manufacture of washing soda by Solvay process?
Solution. NaCl, CaCO3 and NH3.
Teacher's Note: Brine, limestone and ammonia; NH3 is recycled.
Exam Note: List all three raw materials.
Question 26. Why is calcium preferred over sodium to remove last traces of moisture from alcohol?
Solution. Both Na and Ca react with water forming their respective hydroxides. In contrast, Na reacts with alcohol to form sodium alkoxide but Ca does not.
Teacher's Note: Calcium does not consume the alcohol, so it dries it without loss.
Exam Note: Contrast reactions with alcohol.
Question 27. Bones contain calcium ions. What do you think would be the anion associated with them?
Solution. PO43- ion.
Teacher's Note: Bone mineral is largely calcium phosphate.
Exam Note: Answer: phosphate ion.
Question 28. Give one important ore of each of sodium and potassium.
Solution. Na : NaCl and K : KCl.
Teacher's Note: Rock salt and sylvine are the common chloride ores.
Exam Note: Give formula for each.
Question 29. Give two ores of magnesium.
Solution. Carnallite (KCl.MgCl2.6H2O) and magnesium chloride (MgCl2).
Teacher's Note: Carnallite is a double chloride found in Stassfurt deposits.
Exam Note: Write formulae with ores.
Question 30. The second ionization enthalpy of calcium is more than that of the first and yet calcium forms CaCl2 and not CaCl. Why? (N.C.E.R.T.)
Solution. The higher enthalpy of lattice formation by Ca2+ ions more than compensates the higher ionization enthalpy of calcium.
Teacher's Note: Lattice enthalpy of CaCl2 outweighs the extra ionisation energy.
Exam Note: Quote lattice enthalpy compensation.
Question 31. Give the chemical formula of dolomite and carnallite.
Solution. CaCO3.MgCO3 and KCl.MgCl2.6H2O.
Teacher's Note: Dolomite is a double carbonate; carnallite a double chloride.
Exam Note: Write both formulae exactly.
Question 32. What is the formula of gypsum? What happens when it is heated?
Solution. CaSO4.2H2O. When heated to 393 K, it gives Plaster of Paris (CaSO4.1/2H2O) but at 473 K it gives dead burnt plaster (CaSO4).
Teacher's Note: Temperature controls the extent of dehydration.
Exam Note: Give both temperatures and products.
Question 33. What is quick lime? What happens when we add water to it?
Solution. CaO, slaked lime, Ca(OH)2 is formed.
Teacher's Note: Slaking is highly exothermic.
Exam Note: CaO + H2O gives Ca(OH)2.
Question 34. What is the formula of Plaster of Paris?
Solution. CaSO4.½H2O.
Teacher's Note: It is the hemihydrate of calcium sulphate.
Exam Note: Write as (CaSO4)2.H2O also.
Question 35. What is dead burnt plaster?
Solution. Anhydrous CaSO4 which has no tendency to absorb H2O is called dead burnt plaster.
Teacher's Note: Overheated gypsum loses the ability to set.
Exam Note: Define with formula CaSO4.
Question 36. What is Epsom salt? What is the action of heat on it?
Solution. MgSO4.7H2O ; MgSO4.7H2O →(423 K, -6H2O) MgSO4.H2O →(573 K, -H2O) MgSO4 →(heat) MgO + SO3.
Teacher's Note: Stepwise dehydration, then decomposition to oxide.
Exam Note: Give temperatures of each stage.
Question 37. Why is it necessary to add gypsum in the final stage of preparation of cement?
Solution. Gypsum is added to slow down the process of setting of cement and thus imparting greater strength to it.
Teacher's Note: Gypsum retards flash setting of tricalcium aluminate.
Exam Note: Say gypsum controls setting time.
Question 38. What is fly ash?
Solution. It is a waste product from steel industry and has properties similar to those of cement. It mainly consists of calcium silicate.
Teacher's Note: Fly ash is a cement substitute added to cement.
Exam Note: Mention use as cement substitute.
Question 39. Why cannot sodium and potassium be prepared by the electrolysis of their aqueous solutions?
Solution. The electrode potential i.e. reduction potential of Na (-2.71 V) or K (-2.92 V) is much lower than that of H2O (-0.83 V), therefore, upon electrolysis, water gets reduced in preference to Na+ or K+ ions. In other words, sodium and potassium cannot be obtained by electrolytic reduction of Na+ or K+ ions in aqueous solution.
Teacher's Note: Water is reduced first; fused salts are electrolysed instead.
Exam Note: Compare reduction potentials with water.
Question 40. Amongst alkali metals, why is lithium regarded as most apt reducing agent in aqueous solutions? (D.S.B. 2001)
Solution. Amongst alkali metals, Li+ has the smallest size and hence has the highest hydration energy. In other words, it has the lowest electrode potential (E° = -3.04 V), i.e., it has the maximum tendency to lose electrons and hence is the strongest (most apt) reducing agent amongst alkali metals.
Teacher's Note: Hydration energy of Li+ makes its E° most negative.
Exam Note: Link hydration energy to E° = -3.04 V.
Question 41. State any one reason for alkaline earth metals having a greater tendency to form complexes than alkali metals. (D.S.B. 2001)
Solution. Because of smaller size and higher charge on alkaline earth metal cations as compared to the corresponding alkali metal cations, alkaline earth metal cations have a greater tendency to form complexes.
Teacher's Note: Higher charge density attracts ligands more strongly.
Exam Note: Cite small size and higher charge.
C.B.S.E.-P.M.T. (Mains) Special
Question 1. How is anhydrous magnesium chloride prepared from magnesium chloride hexahydrate?
Solution. Anhydrous MgCl2 cannot be prepared by simply heating MgCl2.6H2O because it gets hydrolysed by its own water of crystallization. MgCl2.6H2O → MgO + 2 HCl + 5 H2O. However, if hydrated magnesium chloride is heated in an atmosphere of HCl gas at 650 K, it checks the above hydrolysis reaction and the hydrated magnesium chloride now loses water of crystallization to form anhydrous magnesium chloride. MgCl2.6H2O →(HCl gas, 650 K) MgCl2 + 6 H2O.
Teacher's Note: Dry HCl suppresses hydrolysis (common-ion effect) while the water is driven off.
Exam Note: Explain why plain heating gives MgO.
Question 2. Account for the following: (i) Be(OH)2 is insoluble but Ba(OH)2 is fairly soluble in water. (ii) Be(OH)2 is amphoteric while Mg(OH)2 is basic.
Solution. (i) This is because with increase in size (from Be to Ba) the lattice enthalpy decreases significantly but hydration enthalpy remains almost constant. (ii) Because of higher sum of IE1 + IE2 of Be than that of Mg, the M-OH bond can break less easily in Be(OH)2 than in Mg(OH)2. In other words, Be(OH)2 acts as a weak base even weaker than Mg(OH)2. Further because of smaller size and higher electronegativity than that of Mg, Be(OH)2 can accept OH- ions from alkalies to form beryllate ion but Mg(OH)2 does not. Be(OH)2 + 2 OH- → Be(OH)42- (→ BeO22- + 2 H2O, beryllate ion); Mg(OH)2 + 2 OH- does not give Mg(OH)42-. Thus, Be(OH)2 acts as a weak acid but Mg(OH)2 does not. Combining both the facts, we conclude that Be(OH)2 is amphoteric but Mg(OH)2 is basic.
Teacher's Note: Solubility is a lattice versus hydration enthalpy balance; amphoterism comes from small, polarising Be2+.
Exam Note: Show beryllate equation for part (ii).
Question 3. It is necessary to add gypsum in the final stages of preparation of cement. Explain why?
Solution. Gypsum (CaSO4.2H2O) is added in the final stages of preparation of cement since when H2O is added to cement it slows down the process of setting of cement so that it gets sufficiently hardened thereby imparting greater strength to it.
Teacher's Note: Gypsum retards setting, allowing proper hardening and strength.
Exam Note: Say gypsum controls setting time.
Question 4. What is fly ash?
Solution. It is a waste product from iron industry and has properties similar to cement. It mainly consists calcium silicate (CaSiO3).
Teacher's Note: Fly ash is used as a cement substitute.
Exam Note: Mention composition and use as substitute.
Question 5. Give briefly the isolation of magnesium from sea water by the Dow process. Give equations for the steps involved. (I.I.T. 1993)
Solution. Book only says: See pages 12/30. Corrected (answer supplied): sea water is treated with lime (slaked lime) so that Mg2+ is precipitated as Mg(OH)2: MgCl2 + Ca(OH)2 → Mg(OH)2 + CaCl2. The precipitate is treated with HCl: Mg(OH)2 + 2 HCl → MgCl2 + 2 H2O. The solution is evaporated to give MgCl2.6H2O, which is dehydrated in a current of dry HCl, and anhydrous MgCl2 is electrolysed in the fused state (with NaCl and CaCl2 to lower the melting point): at cathode Mg2+ + 2e- → Mg; at anode 2 Cl- → Cl2 + 2e-.
Teacher's Note: Precipitate Mg(OH)2, convert to anhydrous MgCl2, electrolyse the melt.
Exam Note: Write the four steps with equations.
Question 6. Mg3N2 when reacted with water gives off NH3 but HCl is not obtained from MgCl2 on reaction with water at room temperature. (I.I.T. 1997)
Solution. Mg3N2 is a salt of a strong base, Mg(OH)2 and a weak acid (NH3) and hence gets hydrolysed to give NH3. In contrast, MgCl2 is a salt of a strong base, Mg(OH)2 and a strong acid, HCl and hence does not undergo hydrolysis to give HCl.
Teacher's Note: Salt of strong base and strong acid does not hydrolyse; nitride does.
Exam Note: Mention nature of the base and acid.
Question 7. The crystalline salts of alkaline earth metals contain more water of crystallisation than the corresponding alkali metal salts. Why? (I.I.T. 1997)
Solution. Due to smaller size and higher nuclear charge, alkaline earth metals have a higher tendency than alkali metals to attract H2O molecules and thus contain more water of crystallisation than alkali metals. For example, LiCl.2H2O and MgCl2.6H2O.
Teacher's Note: Higher charge density of M2+ holds more water molecules.
Exam Note: Cite NaCl versus MgCl2.6H2O type example.
Question 8. Chlorination of calcium hydroxide produces bleaching powder. Write its chemical equation. (I.I.T. 1998)
Solution. Bleaching powder is obtained by passing Cl2 into Ca(OH)2. Though bleaching powder is often written as Ca(OCl)2, it is actually a mixture. 3 Ca(OH)2 + 2 Cl2 → Ca(OCl)2.Ca(OH)2.CaCl2.2H2O (bleaching powder). (Check: balanced, 3 Ca, 4 Cl, 6 O, 6 H on both sides.)
Teacher's Note: Slaked lime absorbs chlorine to give a mixed hypochlorite-chloride salt.
Exam Note: Balance and give composition of bleaching powder.
I.I.T. (Mains) Special
Question 1. Calcium burns in nitrogen to produce a white powder which dissolves in sufficient water to produce a gas (A) and an alkaline solution. The solution on exposure to air produces a thin solid layer of (B) on the surface. Identify the compounds A and B. (I.I.T. 1996)
Solution. Ca burns in air to form CaO and Ca3N2. 2 Ca + O2 → 2 CaO ; 3 Ca + N2 → Ca3N2. Calcium nitride on hydrolysis with H2O gives ammonia (A): Ca3N2 + 6 H2O → 3 Ca(OH)2 + 2 NH3. The alkaline solution of Ca(OH)2 thus formed reacts with CO2 present in the air to form CaCO3 (B): Ca(OH)2 + CO2 → CaCO3 + H2O. Thus, A = NH3 and B = CaCO3 (white powder).
Teacher's Note: Nitride hydrolyses to NH3; limewater turns milky as CaCO3 forms.
Exam Note: Identify A and B with equations.
Question 2. The Haber-process can be represented by the following scheme. (Scheme as printed in the book: CaCO3 is heated to CaO + CO2; CaO reacts with H2O to give A; CO2 with NH3 + H2O gives B; B with NaCl gives NaHCO3 + D; NaHCO3 on heating gives C + H2O (+ CO2); D with A gives NH3 + H2O + E. Figure described in words.) Identify A, B, C, D and E. (I.I.T. 1999)
Solution. (i) CaO + H2O → Ca(OH)2 (A). (ii) NH3 + H2O + CO2 → NH4HCO3 (B). (iii) 2 NaHCO3 → Na2CO3 + CO2 + H2O (C). (iv) NH4HCO3 + NaCl → NaHCO3 + NH4Cl (D). (v) 2 NH4Cl + Ca(OH)2 → 2 NH3 + 2 H2O + CaCl2 (E). Thus, A = Ca(OH)2, B = NH4HCO3, C = Na2CO3, D = NH4Cl and E = CaCl2. (This scheme is actually the Solvay process, not the Haber process, as the book titles it.)
Teacher's Note: Scheme is the Solvay ammonia-soda process with NH3 recycled.
Exam Note: Identify five compounds with equations.
Multiple Choice Questions (CBSE-PMT, IIT Screening, AIEEE, AIIMS, AFMC, DPMT, CPMT, BHU and other competitive examinations)
Question 1. The raw materials used in the manufacture of sodium carbonate by Solvay's process are: (a) Ammonia and carbon dioxide (b) Sodium chloride and carbon dioxide (c) Sodium chloride, limestone and carbon dioxide (d) Sodium chloride, limestone and ammonia
Solution. Answer: (d) Sodium chloride, limestone and ammonia.
Teacher's Note: Brine, limestone and ammonia; NH3 is recycled, CO2 comes from limestone.
Exam Note: Name all three raw materials.
Question 2. Glauber's salt is (a) FeSO4.7H2O (b) MgSO4.7H2O (c) Na2CO3.10H2O (d) Na2SO4.10H2O
Solution. Answer: (d) Na2SO4.10H2O.
Teacher's Note: Do not confuse with green vitriol, Epsom salt or washing soda.
Exam Note: Memorise common hydrated salts.
Question 3. Plaster of Paris is (a) (CaSO4)2.H2O (b) CaSO4.2H2O (c) CaSO4.H2O (d) CaSO4
Solution. Answer: (a) (CaSO4)2.H2O.
Teacher's Note: Hemihydrate: 2 CaSO4 per H2O.
Exam Note: Remember 1/2 H2O of crystallisation.
Question 4. Which of the following is not present in cement? (a) Gypsum (b) Clay (c) Alumina (d) Alum
Solution. Answer: (d) Alum.
Teacher's Note: Gypsum, clay and alumina are cement ingredients; alum is not.
Exam Note: Know cement composition.
Question 5. Which of the following has the lowest melting point? (a) LiCl (b) NaCl (c) KCl (d) RbCl
Solution. Answer: (a) LiCl. LiCl being covalent has the lowest m.p.
Teacher's Note: Covalent character lowers melting point.
Exam Note: Cite Fajans rule for LiCl.
Question 6. Which of the following alkaline earth metal sulphates is least soluble in water? (a) BaSO4 (b) MgSO4 (c) SrSO4 (d) CaSO4
Solution. Answer: (a) BaSO4.
Teacher's Note: Sulphate solubility falls down group 2 as lattice energy outweighs hydration energy.
Exam Note: Solubility of sulphates decreases down the group.
Question 7. The basic character of the oxides, MgO, SrO, K2O, NiO and Cs2O increases in the order: (a) MgO > SrO > K2O > NiO > Cs2O (b) Cs2O < K2O < MgO < SrO < NiO (c) NiO < MgO < SrO < K2O < Cs2O (d) K2O < NiO < MgO < SrO < Cs2O
Solution. Answer: (c) NiO < MgO < SrO < K2O < Cs2O. Alkali metal oxides are most basic followed by alkaline earth metal oxides while transition metal oxides are least basic. Amongst alkali and alkaline earth metal oxides, basicity increases down the group. Thus, Cs2O is more basic than K2O and SrO is more basic than MgO. Therefore, the overall order is NiO < MgO < SrO < K2O < Cs2O.
Teacher's Note: Basicity: transition < group 2 < group 1; increases down groups.
Exam Note: Order by group, then by size.
Question 8. Which of the following are arranged in increasing order of solubilities? (a) CaCO3 < KHCO3 < NaHCO3 (b) NaHCO3 < KHCO3 < CaCO3 (c) KHCO3 < NaHCO3 < CaCO3 (d) CaCO3 < NaHCO3 < KHCO3
Solution. Answer: (d) CaCO3 < NaHCO3 < KHCO3. The solubility of bicarbonates of alkali metals increases down the group. But alkaline earth metal carbonates are insoluble in H2O.
Teacher's Note: Alkali bicarbonates dissolve more down the group; CaCO3 is insoluble.
Exam Note: State solubility trend of bicarbonates.
Question 9. The thermal stability of alkaline earth metal carbonates decreases in the order: (a) BaCO3 > SrCO3 > CaCO3 > MgCO3 (b) BaCO3 > SrCO3 > MgCO3 > CaCO3 (c) CaCO3 > SrCO3 > MgCO3 > BaCO3 (d) MgCO3 > CaCO3 > SrCO3 > BaCO3
Solution. Answer: (a) BaCO3 > SrCO3 > CaCO3 > MgCO3.
Teacher's Note: Stability rises down the group as polarising power of M2+ falls.
Exam Note: Thermal stability increases down group 2.
Question 10. Which of the following alkali metal halides has the lowest lattice energy? (a) LiF (b) NaCl (c) KBr (d) CsI
Solution. Answer: (d) CsI. Bigger the size of the ions, larger is the distance (r) between their centres and lower is the lattice energy (q1q2/r2).
Teacher's Note: Lattice energy falls as ionic radii rise; CsI has the largest ions.
Exam Note: Use lattice energy ∝ 1/r.
Question 11. A solution of sodium metal in liquid ammonia is strongly reducing due to the presence of (a) sodium atoms (b) sodium hydride (c) sodium amide (d) solvated electrons
Solution. Answer: (d) solvated electrons.
Teacher's Note: Ammoniated electrons are the reducing species and give the blue colour.
Exam Note: Name solvated electrons.
Question 12. Sodium reacts with water more vigorously than lithium because, it (a) has higher atomic weight (b) is a metal (c) is more electropositive (d) more electronegative
Solution. Answer: (c) is more electropositive.
Teacher's Note: Na has lower ionisation enthalpy, so reaction is more vigorous.
Exam Note: Relate reactivity to electropositivity.
Question 13. The hydration energy of Mg2+ is greater than that of (a) Al3+ (b) Na+ (c) Be2+ (d) Mg3+
Solution. Answer: (b) Na+. Na+ has +1 unit charge, Mg2+ and Be2+ have +2 unit charge while Mg3+ and Al3+ have +3 unit charge, therefore, hydration energy of Al3+ and Mg3+ is expected to be higher than those of Mg2+ and Be2+, which in turn, are expected to be higher than that of Na+. Further the hydration energy of Be2+ is higher than that of Mg2+ due to its smaller size. In other words, hydration energy of Mg2+ is expected to be higher than that of Na+.
Teacher's Note: Hydration energy rises with charge and falls with size.
Exam Note: Compare charge/size ratios.
Question 14. The compound insoluble in acetic acid is (a) calcium oxide (b) calcium carbonate (c) calcium oxalate (d) calcium hydroxide
Solution. Answer: (c) calcium oxalate. CaO, CaCO3 and Ca(OH)2 are all bases and hence must dissolve in acetic acid to form calcium acetate. Only calcium oxalate does not dissolve in CH3COOH.
Teacher's Note: Oxalate of a weak-acid anion is not attacked by weak acetic acid.
Exam Note: Used in qualitative test for Ca2+.
Question 15. The metallic lustre exhibited by sodium is explained by (a) diffusion of sodium ions (b) oscillation of loose electrons (c) excitation of free electrons (d) existence of body centred cubic lattice
Solution. Answer: (b) oscillation of loose electrons.
Teacher's Note: Mobile electrons oscillate with incident light and re-emit it, giving lustre.
Exam Note: Link lustre to free electrons.
Question 16. Gypsum on heating to 390 K gives (a) CaSO4.2H2O (b) CaSO4 (c) CaSO4.1/2H2O (d) SO3 and CaO
Solution. Answer: (c) CaSO4.1/2H2O.
Teacher's Note: Mild heating gives the hemihydrate, Plaster of Paris; higher heating gives anhydrite.
Exam Note: Remember 393 K gives Plaster of Paris.
Question 17. The by-product of Solvay ammonia process is (a) carbon dioxide (b) ammonia (c) calcium chloride (d) calcium carbonate
Solution. Answer: (c) calcium chloride.
Teacher's Note: NH3 is recovered with Ca(OH)2 leaving CaCl2 as waste.
Exam Note: CaCl2 is formed in ammonia recovery.
Question 18. The drying agent which absorbs carbon dioxide and reacts violently with water is (a) sodium carbonate (b) alcohol (c) conc. H2SO4 (d) calcium oxide
Solution. Answer: (d) calcium oxide.
Teacher's Note: CaO is basic: it reacts with H2O and with acidic CO2.
Exam Note: Quicklime absorbs both water and CO2.
Question 19. Metallic calcium is prepared by (a) displacement of calcium by iron from calcium sulphate solution (b) electrolysis of molten calcium chloride (c) reduction of lime by coke (d) electrolysis of aqueous solution of calcium nitrate
Solution. Answer: (b) electrolysis of molten calcium chloride.
Teacher's Note: Highly electropositive Ca needs electrolysis of fused salt, not chemical reduction.
Exam Note: Electrolysis of fused CaCl2 (with CaF2).
Question 20. The following compounds have been arranged in order of their increasing thermal stabilities. Identify the correct order: K2CO3 (I), MgCO3 (II), CaCO3 (III), BeCO3 (IV) (a) I < II < III < IV (b) IV < II < III < I (c) IV < II < I < III (d) II < IV < III < I
Solution. Answer: (b) IV < II < III < I.
Teacher's Note: Group 1 carbonate is most stable; stability rises down group 2.
Exam Note: BeCO3 least, K2CO3 most stable.
Question 21. Among KO2, AlO2-, BaO2 and NO2+, unpaired electron is present in (a) NO2+ and BaO2 (b) KO2 and AlO2- (c) KO2 only (d) BaO2 only
Solution. Answer: (c) KO2 only. Only KO2 has an unpaired electron, K+ [:O-O:]- (superoxide ion).
Teacher's Note: Superoxide O2- has one unpaired electron; peroxide has none.
Exam Note: Count electrons in O2- versus O22-.
Question 22. Property of alkaline earth metals that increases with their atomic number is (a) ionization energy (b) solubility of their hydroxides (c) solubility of their sulphates (d) electronegativity
Solution. Answer: (b) solubility of their hydroxides.
Teacher's Note: Hydroxide solubility increases down group 2; the other three fall.
Exam Note: Hydroxides become more soluble down the group.
Question 23. Calcium is obtained by the (a) Roasting of limestone (b) Electrolysis of a solution of calcium chloride in H2O (c) Reduction of calcium chloride with carbon (d) Electrolysis of molten anhydrous calcium chloride
Solution. Answer: (d) Electrolysis of molten anhydrous calcium chloride.
Teacher's Note: Aqueous electrolysis gives H2; only fused CaCl2 gives Ca.
Exam Note: Fused anhydrous CaCl2, not aqueous.
Question 24. For two ionic solids CaO and KI, identify the wrong statement among the following: (a) Lattice energy of CaO is much higher than that of KI (b) KI is soluble in benzene (c) CaO has high m.p. (d) KI has high m.p.
Solution. Answer: (d) KI has high m.p.. Book answer (d): due to lower lattice energy of KI as compared to that of CaO, the m.p. of KI is much lower than that of CaO. (Flag: statement (b) is also false, since ionic KI is insoluble in benzene; the book key is kept and flagged for human check.)
Teacher's Note: Compare lattice energies: CaO (M2+, O2-) far exceeds KI.
Exam Note: Charge product decides lattice energy and m.p.
Question 25. The compounds of alkaline earth metals have the following magnetic nature (a) Diamagnetic (b) Paramagnetic (c) Ferromagnetic (d) Antiferromagnetic
Solution. Answer: (a) Diamagnetic.
Teacher's Note: M2+ ions have noble gas configuration, no unpaired electrons.
Exam Note: Noble gas core means diamagnetic.
Question 26. The stability of the following alkali metal chlorides follows the order: (a) LiCl > KCl > NaCl > CsCl (b) CsCl > KCl > NaCl > LiCl (c) NaCl > KCl > LiCl > CsCl (d) KCl > CsCl > NaCl > LiCl
Solution. Answer: (d) KCl > CsCl > NaCl > LiCl. The stability of a compound depends upon its enthalpy of formation, ΔH°f. Evidently more negative the value of ΔH°f, more stable is the compound. (Refer to Table 12.3 on page 12/10). Thus, option (d) is correct, i.e., KCl (-428) > CsCl (-424) > NaCl (-400) > LiCl (-399). The values given in parentheses are in kJ mol-1. (Flag: other data books give CsCl slightly more negative than KCl; the book key is kept.)
Teacher's Note: Stability follows how negative the enthalpy of formation is.
Exam Note: Use ΔfH values from the table.
Question 27. Which of the following substances can be used for drying gases? (a) Calcium carbonate (b) Sodium carbonate (c) Sodium bicarbonate (d) Calcium oxide
Solution. Answer: (d) Calcium oxide.
Teacher's Note: Basic CaO is used for drying neutral and basic gases like NH3.
Exam Note: Quicklime is a drying agent.
Question 28. Epsom salt is (a) MgSO4.7H2O (b) CaSO4.H2O (c) MgSO4.2H2O (d) BaSO4.2H2O
Solution. Answer: (a) MgSO4.7H2O.
Teacher's Note: Epsom salt is magnesium sulphate heptahydrate.
Exam Note: Write formula with 7H2O.
Question 29. Among the alkaline earth metals, the element forming predominantly covalent compound is (a) Barium (b) Strontium (c) Calcium (d) Beryllium
Solution. Answer: (d) Beryllium.
Teacher's Note: Smallest, most polarising Be2+ gives covalent compounds.
Exam Note: Apply Fajans rules to Be.
Question 30. The solubility in water of sulphates down the Be group is: Be > Mg > Ca > Sr > Ba. This is due to (a) Increase in melting point (b) High ionization energy (c) Higher coordination number (d) All of these.
Solution. Answer: (c) Higher coordination number. As the size increases, the extent of hydration, i.e., coordination number decreases and hence the solubility decreases accordingly.
Teacher's Note: Hydration decreases down the group, lowering solubility of sulphates.
Exam Note: Hydration versus lattice energy decides solubility.
Question 31. Which of the following is the correct order of gradually decreasing basic nature of the oxides? (a) Al2O3, MgO, Cl2O7, SO3 (b) Cl2O7, SO3, Al2O3, MgO (c) SO3, Cl2O7, MgO, Al2O3 (d) MgO, Al2O3, SO3, Cl2O7
Solution. Answer: (d) MgO, Al2O3, SO3, Cl2O7. MgO is basic, Al2O3 is amphoteric while SO3 and Cl2O7 both are acidic but Cl2O7 is more acidic than SO3. Therefore, option (d) is correct.
Teacher's Note: Basic to amphoteric to acidic across a period; Cl2O7 most acidic.
Exam Note: Order by metallic to non-metallic character.
Question 32. Which one is used as an air purifier in space craft? (a) Quick lime (b) Slaked lime (c) Potassium superoxide (d) Anhydrous CaCl2
Solution. Answer: (c) Potassium superoxide.
Teacher's Note: KO2 absorbs CO2 and releases O2.
Exam Note: Superoxide regenerates oxygen while removing CO2.
Question 33. The active constituent of bleaching powder is (a) Ca(OCl)2 (b) Ca(OCl)Cl (c) Ca(ClO2)2 (d) Ca(ClO2)Cl
Solution. Answer: (b) Ca(OCl)Cl.
Teacher's Note: Bleaching powder is Ca(OCl)Cl, i.e. CaOCl2.
Exam Note: Write bleaching powder as CaOCl2.
Question 34. Bleaching powder loses its power on keeping for a long time because (a) it changes into calcium hypochlorite (b) it changes into calcium chloride and calcium hydroxide (c) it absorbs moisture (d) it changes into calcium chloride and calcium chlorate.
Solution. Answer: (d) it changes into calcium chloride and calcium chlorate..
Teacher's Note: Slow disproportionation: 6 CaOCl2 gives 5 CaCl2 + Ca(ClO3)2.
Exam Note: Chlorate formation destroys bleaching action.
Question 35. The correct order of increasing ionic character is (a) BeCl2 < MgCl2 < CaCl2 < BaCl2 (b) BeCl2 < MgCl2 < BaCl2 < CaCl2 (c) BeCl2 < BaCl2 < MgCl2 < CaCl2 (d) BaCl2 < CaCl2 < MgCl2 < BeCl2
Solution. Answer: (a) BeCl2 < MgCl2 < CaCl2 < BaCl2. As the size of the cation increases, electronegativity decreases and hence the electronegativity difference increases and hence ionic character increases accordingly.
Teacher's Note: Larger cation gives greater electronegativity difference with Cl.
Exam Note: Link ionic character to cation size.
Question 36. KO2 (potassium superoxide) is used in oxygen cylinders in space craft and submarines because it (a) absorbs CO2 and increases O2 content (b) eliminates moisture (c) absorbs CO2 (d) produces ozone
Solution. Answer: (a) absorbs CO2 and increases O2 content. 4 KO2 + 2 CO2 → 2 K2CO3 + 3 O2. Although KO2 also reacts with moisture of the breath but does not completely eliminate it. 4 KO2 + 2 H2O → 4 KOH + 3 O2.
Teacher's Note: KO2 removes exhaled CO2 and releases O2.
Exam Note: Write the KO2 + CO2 equation.
Question 37. A metal M readily forms water soluble sulphate MSO4, water insoluble hydroxide M(OH)2 and oxide MO which becomes inert on heating. The hydroxide is soluble in NaOH. The metal M is (a) Be (b) Mg (c) Ca (d) Sr
Solution. Answer: (a) Be. BeO being amphoteric dissolves in NaOH.
Teacher's Note: Soluble sulphate, insoluble amphoteric hydroxide points to Be.
Exam Note: Amphoteric hydroxide soluble in NaOH is Be.
Question 38. Which of the following process is used in the extractive metallurgy of magnesium? (a) fused salt electrolysis (b) self reduction (c) aqueous solution electrolysis (d) thermite reduction
Solution. Answer: (a) fused salt electrolysis.
Teacher's Note: Mg is obtained by electrolysis of fused anhydrous MgCl2.
Exam Note: Fused salt electrolysis for reactive metals.
Question 39. Identify the correct order of acidic strengths of CO2, CuO, CaO, H2O (a) CaO < CuO < H2O < CO2 (b) H2O < CuO < CaO < CO2 (c) CaO < H2O < CuO < CO2 (d) H2O < CO2 < CaO < CuO
Solution. Answer: (a) CaO < CuO < H2O < CO2. H2O is a neutral oxide. Non-metallic oxides (i.e. CO2) are acidic while metallic oxides (i.e. CaO and CuO) are basic. However, oxides of alkaline earth metals are more basic than oxides of transition metals. Thus, the overall acid strength decreases in the order: CaO < CuO < H2O < CO2. (As printed in the book; written as listed, the order is of increasing acid strength.)
Teacher's Note: Metal oxides basic, H2O neutral, CO2 acidic.
Exam Note: Arrange from strongly basic to acidic.
Question 40. The paramagnetic species is (a) KO2 (b) SiO2 (c) TiO2 (d) BaO2
Solution. Answer: (a) KO2. KO2 contains the O2- ion with one unpaired electron.
Teacher's Note: Superoxide is paramagnetic; others have no unpaired electrons.
Exam Note: Spot the superoxide.
Question 41. On dissolving moderate amount of sodium metal in liquid NH3 at low temperature, which one of the following does not occur? (a) Blue coloured solution is obtained (b) Na+ ions are formed in the solution (c) Liquid ammonia becomes good conductor of electricity (d) Liquid ammonia remains diamagnetic.
Solution. Answer: (d) Liquid ammonia remains diamagnetic.. The solution is paramagnetic because of free ammoniated electrons.
Teacher's Note: Free electrons make the solution paramagnetic.
Exam Note: Recall blue, conducting, paramagnetic.
Question 42. The substance not likely to contain CaCO3 is (a) dolomite (b) a marble statue (c) calcined gypsum (d) sea shells
Solution. Answer: (c) calcined gypsum. Calcined gypsum is CaSO4.1/2H2O, not carbonate.
Teacher's Note: Gypsum is a sulphate mineral.
Exam Note: Distinguish carbonate and sulphate minerals.
Question 43. Solubilities of carbonates decrease down the magnesium group due to decrease in (a) entropy of solution formation (b) lattice energies of solids (c) hydration energy of cations (d) inter-ionic attraction
Solution. Answer: (c) hydration energy of cations. Hydration energy of cations falls faster than lattice energy down the group.
Teacher's Note: Hydration energy decreases down the group.
Exam Note: Compare hydration and lattice energies.
Question 44. In curing cement plasters, water is sprinkled from time to time. This helps in (a) converting sand into silicic acid (b) keeping it cool (c) developing interlocking needle like crystals of hydrated silicates (d) hydrating sand and gravel mixed with cement
Solution. Answer: (c) developing interlocking needle like crystals of hydrated silicates. Setting is hydration of silicates and aluminates forming interlocked crystals.
Teacher's Note: Curing sustains hydration for strength.
Exam Note: Link water to hydrated silicate crystals.
Question 45. Mg and Li are similar in their properties due to (a) same e/m ratio (b) same electron affinity (c) same group (d) same ionic potential
Solution. Answer: (d) same ionic potential. Li+ and Mg2+ ions have similar polarising power or ionic potential.
Teacher's Note: Diagonal relationship: equal charge/size (ionic potential).
Exam Note: Quote similar polarising power.
Question 46. Photoelectric effect is maximum in (a) Cs (b) Na (c) K (d) Li
Solution. Answer: (a) Cs. Cs has the lowest ionisation enthalpy and work function.
Teacher's Note: Lowest ionisation enthalpy gives easy photoemission.
Exam Note: Cs is used in photocells.
Question 47. Which of the following metal has stable carbonates? (a) Na (b) Mg (c) Al (d) Si
Solution. Answer: (a) Na. Group 1 carbonates (except Li) do not decompose on heating.
Teacher's Note: Na2CO3 is thermally stable.
Exam Note: Alkali carbonates resist heating.
Question 48. A sodium salt of unknown anion when treated with MgCl2 gives white precipitate only on boiling. The anion is (a) SO42- (b) HCO3- (c) CO32- (d) NO3-
Solution. Answer: (b) HCO3-. Bicarbonates on heating form insoluble carbonates. MgCl2 + 2 NaHCO3 → 2 NaCl + Mg(HCO3)2 ; Mg(HCO3)2 →(heat) MgCO3↓ + CO2 + H2O.
Teacher's Note: Soluble Mg(HCO3)2 gives MgCO3 only on boiling.
Exam Note: Contrast with carbonate precipitating in cold.
Question 49. A solid compound 'X' on heating gives CO2 gas and a residue. The residue mixed with water forms 'Y'. On passing an excess of CO2 through 'Y' in water, a clear solution 'Z' is obtained. On boiling 'Z', compound 'X' is reformed. The compound 'X' is (a) Ca(HCO3)2 (b) CaCO3 (c) Na2CO3 (d) K2CO3
Solution. Answer: (b) CaCO3. CaCO3 →(heat) CO2 + CaO (X); CaO + H2O → Ca(OH)2 (Y); Ca(OH)2 + 2 CO2 (excess) → Ca(HCO3)2 (Z); Ca(HCO3)2 →(heat) CaCO3 + CO2 + H2O. (The book labels CaCO3 as X in these steps.)
Teacher's Note: Limestone cycle: CaCO3, CaO, Ca(OH)2, Ca(HCO3)2.
Exam Note: Identify X, Y, Z with equations.
Question 50. One mole of magnesium nitride on reaction with an excess of water gives (a) one mole of ammonia (b) one mole of nitric acid (c) two moles of ammonia (d) two moles of nitric acid
Solution. Answer: (c) two moles of ammonia. Mg3N2 + 6 H2O → 3 Mg(OH)2 + 2 NH3. (Book prints "Mg3H2" and "Mg(CH)2" through typographical errors; equation corrected.)
Teacher's Note: Balanced hydrolysis gives 2 mol NH3 per mol nitride.
Exam Note: Balance N: two NH3.
Question 51. Which of the following is not a Mg ore? (a) Gypsum (b) Magnesite (c) Dolomite (d) Carnallite
Solution. Answer: (a) Gypsum. Gypsum is CaSO4.2H2O, a calcium mineral.
Teacher's Note: Magnesium ores: magnesite, dolomite, carnallite.
Exam Note: Gypsum is calcium, not magnesium.
Assertion-Reason Type Questions
Question 1. Assertion (Column 1): Magnesium can be obtained by the electrolysis of aqueous MgCl2. Reason (Column 2): The reduction potential of Mg2+ is far lower than that of H+.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (d). Correct assertion: Mg can be obtained by electrolysis of fused MgCl2.
Teacher's Note: Water is reduced in preference, so only fused salt gives Mg.
Exam Note: State fused versus aqueous electrolysis.
Question 2. Assertion (Column 1): Common salt becomes damp after some time on keeping in air. Reason (Column 2): Common salt is NaCl which is hygroscopic in nature.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (c). Correct reason: NaCl contains impurities of MgCl2, CaCl2, MgSO4, CaSO4 etc. which are hygroscopic.
Teacher's Note: Impurities, not pure NaCl, absorb moisture.
Exam Note: Name hygroscopic impurities.
Question 3. Assertion (Column 1): Magnesium keeps on burning in CO2. Reason (Column 2): Magnesium reduces CO2 to C.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: 2 Mg + CO2 gives 2 MgO + C, strongly exothermic.
Exam Note: Write the equation for reasoning.
Question 4. Assertion (Column 1): Calcium and magnesium oxides are not reduced by carbon. Reason (Column 2): Calcium and magnesium oxides react with carbon to form their respective carbides.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Book key: reason explains the assertion; oxides are too stable for carbon reduction.
Exam Note: Metal oxides are very stable.
Question 5. Assertion (Column 1): Li+ (aq) has larger ionic radius than that of Na+ (aq). Reason (Column 2): Li+ (aq) is relatively more extensively hydrated compared to Na+ (aq).
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Extensive hydration makes hydrated Li+ bigger than hydrated Na+.
Exam Note: Compare hydrated, not bare, radii.
Question 6. Assertion (Column 1): Potassium can be obtained by the electrolysis of fused KCl in molten CaCl2. Reason (Column 2): Metallic potassium is soluble in melt (molten CaCl2). Thus, the cell for electrolysis gets short circuited.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (d). Correct assertion: K cannot be obtained by the electrolysis of fused KCl in molten CaCl2.
Teacher's Note: Dissolved K makes the melt conducting, short-circuiting the cell.
Exam Note: Mention K dissolving in the melt.
Question 7. Assertion (Column 1): The alkali metals are strong reducing agents. Reason (Column 2): They have only one electron to be lost from their valence shells.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Book key: reason explains the assertion.
Exam Note: Ease of losing the ns1 electron.
Question 8. Assertion (Column 1): Potassium carbonate cannot be manufactured by a process similar to the Solvay's soda ammonia process. Reason (Column 2): Potassium hydrogen carbonate is less soluble in water than sodium hydrogen carbonate.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (c). Correct reason: KHCO3 is more soluble in H2O than NaHCO3.
Teacher's Note: KHCO3 does not precipitate, so the Solvay route fails for K.
Exam Note: Solubility of KHCO3 is the issue.
Question 9. Assertion (Column 1): Li resembles Mg. (A.I.I.M.S. 1997) Reason (Column 2): Li+ has same size as Mg2+.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Diagonal relationship rests on similar polarising power.
Exam Note: Book key; link to ionic potential.
Question 10. Assertion (Column 1): Na2SO4 is soluble in water while BaSO4 is insoluble. (A.I.I.M.S. 1997) Reason (Column 2): Lattice energy of barium sulphate exceeds its hydration energy.
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Solubility needs hydration energy greater than lattice energy.
Exam Note: Compare lattice and hydration energies.
Question 11. Assertion (Column 1): The alkali metals can form ionic hydrides which contain the hydride ion, H-. Reason (Column 2): The alkali metals have low electronegativity; their hydrides conduct electricity when fused and liberate hydrogen at the anode. (I.I.T. 1995)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Electrolysis of fused hydride giving H2 at anode proves H-.
Exam Note: Cite H2 at the anode.
Question 12. Assertion (Column 1): Sodium ions are discharged in preference to hydrogen ions at a mercury cathode. Reason (Column 2): The nature of cathode can affect the order of discharge of cations. (A.I.I.M.S. 1996)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: High hydrogen overvoltage on mercury lets Na+ discharge.
Exam Note: Mention overvoltage in Castner-Kellner cell.
Question 13. Assertion (Column 1): Alkali metals impart colour to the flame. Reason (Column 2): Their ionization energies are low. (A.I.I.M.S. 1998)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Easy excitation of the valence electron gives flame colour.
Exam Note: Excitation then emission explains colour.
Question 14. Assertion (Column 1): Sulphur is estimated as BaSO4 and not as MgSO4. Reason (Column 2): The ionic radius of Mg2+ is smaller than that of Ba2+. (I.I.T. 1998)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (b). Correct explanation: BaSO4 is insoluble while MgSO4 is soluble.
Teacher's Note: Insolubility of BaSO4 allows quantitative precipitation.
Exam Note: Gravimetric analysis needs an insoluble product.
Question 15. Assertion (Column 1): LiCl is predominantly covalent compound. Reason (Column 2): Electronegativity difference between Li and Cl is too small. (I.I.T. 1998)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (c). Correct reason: because of small size Li prefers to share rather than donating electrons.
Teacher's Note: Fajans rules, not electronegativity difference, explain it.
Exam Note: State small size and high polarising power.
Question 16. Assertion (Column 1): Al(OH)3 is amphoteric in nature. Reason (Column 2): Al-O and O-H bonds can be broken with equal ease in Al(OH)3. (I.I.T. 1998)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Equal ease of M-O and O-H cleavage gives acid and base behaviour.
Exam Note: Link bond cleavage to amphoterism.
Question 17. Assertion (Column 1): Barium is not required for normal biological function in human. Reason (Column 2): Barium does not show variable oxidation state. (A.I.I.M.S. 2003)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (b).
Teacher's Note: Book key: both true; reason does not explain assertion.
Exam Note: Ba2+ is toxic, though non-essential.
Question 18. Assertion (Column 1): Barium carbonate is more soluble in HNO3 than in plain water. Reason (Column 2): Carbonate is a weak base and reacts with the H+ from the strong acid causing the barium salt to dissociate. (A.I.I.M.S. 2003)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (a).
Teacher's Note: Weak-base carbonate is protonated by strong acid.
Exam Note: Salts of weak acids dissolve in strong acids.
Question 19. Assertion (Column 1): Mg is not present in enamel of human teeth. Reason (Column 2): Mg is an essential element for biological functions of human. (A.I.I.M.S. 2004)
Key: (a) both correct, reason explains assertion; (b) both correct, reason does not explain; (c) assertion correct, reason incorrect; (d) assertion incorrect, reason correct.
Solution. Answer: (b).
Teacher's Note: Book key: both true; the reason does not explain the assertion.
Exam Note: Mg is essential though absent from enamel.
True/False Statements
Question 1. Elements found in the combined state are often present as oxides, carbonates, sulphides and silicates.
Solution. True.
Teacher's Note: Reactive metals occur as stable oxides, carbonates, sulphides and silicates.
Exam Note: Name common combined forms.
Question 2. All alkali metal hydroxides are strong bases.
Solution. True.
Teacher's Note: Alkali hydroxides ionise completely in water.
Exam Note: Basicity rises down group 1.
Question 3. Sodium carbonate is called soda ash.
Solution. True.
Teacher's Note: Anhydrous Na2CO3 is soda ash; the decahydrate is washing soda.
Exam Note: Distinguish soda ash and washing soda.
Question 4. Magnesium imparts pink colour to the flame.
Solution. False, does not impart any colour.
Teacher's Note: High ionisation enthalpy of Mg prevents flame excitation.
Exam Note: Be and Mg give no flame colour.
Question 5. Dead burnt plaster can be used as a desiccant.
Solution. False.
Teacher's Note: Overheated anhydrous CaSO4 has lost its tendency to absorb water.
Exam Note: Compare with partly dehydrated gypsum.
Question 6. Calcium is present in the bones of animals and human beings as phosphates.
Solution. True.
Teacher's Note: Bone mineral is mainly calcium phosphate (hydroxyapatite).
Exam Note: Bones contain Ca3(PO4)2.
Question 7. Mg and Ca form dipositive ions due to their high hydration energies.
Solution. True.
Teacher's Note: Large hydration and lattice energies compensate the second ionisation enthalpy.
Exam Note: Link M2+ stability to hydration energy.
Question 8. Solvay-ammonia process is used for the manufacture of caustic soda.
Solution. False, washing soda.
Teacher's Note: Solvay process gives Na2CO3; caustic soda is made by electrolysis of brine.
Exam Note: Solvay gives soda ash, not NaOH.
Question 9. Lithium resembles magnesium since their electronegativities are almost the same.
Solution. True.
Teacher's Note: Diagonal relationship: similar electronegativity and polarising power.
Exam Note: Quote diagonal relationship.
Question 10. Lithium burns in nitrogen to give lithium nitride.
Solution. True.
Teacher's Note: Li is the only alkali metal forming a nitride directly.
Exam Note: Equation: 6 Li + N2 gives 2 Li3N.
Question 11. Beryllium is more electropositive than magnesium.
Solution. False, Mg is more electropositive than Be.
Teacher's Note: Electropositivity increases down the group; Be is smallest, hardest to ionise.
Exam Note: Trend increases down the group.
Question 12. Alkaline earth metals are better reducing agents than alkali metals.
Solution. False, alkali metals because of their more negative standard electrode potentials are better reducing agents than alkaline earth metals.
Teacher's Note: Alkali metals have lower ionisation enthalpy, so they reduce more readily.
Exam Note: Compare E° values of the groups.
Question 13. Beryllium resembles aluminium closely in its properties though it belongs to a different group.
Solution. True, diagonal relationship.
Teacher's Note: Similar charge/size ratio of Be2+ and Al3+ gives resemblance.
Exam Note: State diagonal relationship.
Question 14. Magnesium is an essential constituent of chlorophyll, the green colouring matter of plants.
Solution. True.
Teacher's Note: Mg2+ sits at the centre of the chlorophyll porphyrin ring.
Exam Note: Mg in chlorophyll, Ca in bones.
Question 15. Sodium when burnt in excess of oxygen gives sodium oxide. (I.I.T. 1987)
Solution. False, Na2O2.
Teacher's Note: Na forms the peroxide in excess oxygen; Li gives the oxide.
Exam Note: Na gives peroxide, K gives superoxide.
Question 16. In group 1 of alkali metals, the ionization potential decreases down the group. Therefore, Lithium is a powerful reducing agents.
Solution. False, electrode potential of Li is the most negative amongst the alkali metals and hence it is the strongest reducing agent.
Teacher's Note: Reducing power in water follows E°, not ionisation enthalpy, because of hydration.
Exam Note: Distinguish ionisation energy from E°.
Fill in the Blanks
Question 1. Highly electropositive metals like alkali metals are obtained by ....
Solution. Answer: electrolytic reduction.
Teacher's Note: Strong reducing metals need electrolysis of fused salts.
Exam Note: Fused salt electrolysis.
Question 2. Magnesium burns in air to give .... and ....
Solution. Answer: MgO, Mg3N2.
Teacher's Note: Mg combines with both oxygen and nitrogen of air.
Exam Note: Oxide and nitride both form.
Question 3. Lithium resembles more with ...... than with sodium.
Solution. Answer: magnesium.
Teacher's Note: Diagonal relationship Li-Mg.
Exam Note: Li resembles Mg.
Question 4. Be(OH)2 is ........ and thus dissolves in alkalies as well as acids.
Solution. Answer: amphoteric.
Teacher's Note: Be(OH)2 gives beryllate with alkali.
Exam Note: Amphoteric hydroxide.
Question 5. Lithium nitrate on heating gives ........ and ........
Solution. Answer: NO2, Li2O and O2.
Teacher's Note: LiNO3 decomposes like group 2 nitrates: 4 LiNO3 gives 2 Li2O + 4 NO2 + O2.
Exam Note: Li differs from other alkali nitrates.
Question 6. Na2CO3 is ........ in water but BaCO3 is ........
Solution. Answer: soluble, insoluble.
Teacher's Note: Alkali carbonates dissolve; alkaline earth carbonates do not.
Exam Note: Carbonate solubility contrast.
Question 7. In Solvay process, excess of ........ is passed through sodium chloride solution which has been previously saturated with ........
Solution. Answer: carbon dioxide, ammonia.
Teacher's Note: NH3-saturated brine absorbs CO2 giving NaHCO3.
Exam Note: Ammoniated brine then CO2.
Question 8. Sodium is obtained by the electrolysis of .... as well as .... in their molten state.
Solution. Answer: sodium chloride, sodium hydroxide.
Teacher's Note: Fused NaCl (Downs cell) or fused NaOH (Castner process).
Exam Note: Both are electrolysed fused.
Question 9. During electrolytic extraction of Mg from MgCl2, .... is added to lower the melting point of the electrolyte.
Solution. Answer: NaCl and CaCl2.
Teacher's Note: Mixed chlorides melt lower, saving energy.
Exam Note: Add NaCl/CaCl2 flux.
Question 10. Calcium oxide is commonly known ..... while calcium hydroxide is called .....
Solution. Answer: quick lime, slaked lime.
Teacher's Note: Slaking CaO with water gives Ca(OH)2.
Exam Note: Common names of lime compounds.
Question 11. The ........ of Be is highest among the alkali metals.
Solution. Answer: ionization energy or electronegativity. (The book prints "alkali metals"; Be belongs to the alkaline earth metals.)
Teacher's Note: Small size of Be gives highest ionisation energy in group 2.
Exam Note: Be is smallest, hence highest.
Question 12. The alkali metal hydroxides are ........ and the basicity of the hydroxides ........ with increase in size of the cation.
Solution. Answer: strong bases, increases.
Teacher's Note: Weaker M-OH bond with larger M gives more basic hydroxide.
Exam Note: Basicity rises down group.
Question 13. Among alkali metals, .... salts impart red colour while ..... salts do not impart any colour to the flame.
Solution. Answer: Ca2+, Mg2+. (As printed; these are alkaline earth metals.)
Teacher's Note: Ca gives brick red; Mg salts are not excited in the flame.
Exam Note: Ca brick-red, Mg colourless.
Question 14. Ca is extracted by the electrolysis of a fused mixture of ..... and ....
Solution. Answer: CaCl2, CaF2.
Teacher's Note: CaF2 lowers the melting point of CaCl2.
Exam Note: Fused CaCl2 with CaF2.
Question 15. Ca2+ has a smaller ionic radius than K+ because it has ...... (I.I.T. 1993)
Solution. Answer: higher effective nuclear charge.
Teacher's Note: Isoelectronic ions: more protons pull electrons closer.
Exam Note: Isoelectronic ions compare Zeff.
Question 16. On heating, Rb(ICl2) will decompose giving .......... and ......... (I.I.T. 1997)
Solution. Answer: RbCl and ICl.
Teacher's Note: Lattice energy favours the smaller halide anion, Cl-, giving RbCl.
Exam Note: Larger cation stabilises larger anion.
Question 17. A solution of sodium in liquid ammonia at -33°C conducts electricity. On cooling, the conductivity of this solution ........
Solution. Answer: increases.
Teacher's Note: Book key; ammoniated electrons and cations carry current.
Exam Note: Conductivity of metal-ammonia solution.
Matching Type Questions
Question 1. Match: Alkali metals are extracted by ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (e) Electrolytic method.
Teacher's Note: Reactive metals need electrolysis of fused salts.
Exam Note: Match extraction with method.
Question 2. Match: Sodium chloride ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (f) An ore of sodium.
Teacher's Note: NaCl (rock salt) is the main sodium source.
Exam Note: NaCl is Na ore.
Question 3. Match: Sodium bicarbonate is used in ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (c) Fire extinguishers.
Teacher's Note: NaHCO3 with acid releases CO2 to smother fire.
Exam Note: Soda-acid extinguisher.
Question 4. Match: Alkali metals are ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (d) Reducing agents.
Teacher's Note: Low ionisation enthalpy makes them strong reducers.
Exam Note: Alkali metals reduce readily.
Question 5. Match: Alkaline earth metals are ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (b) s-Block elements.
Teacher's Note: Both groups 1 and 2 are s-block.
Exam Note: Groups 1 and 2 are s-block.
Question 6. Match: Magnesium does not give ... Column B: (a) Flame test (b) s-Block elements (c) Fire extinguishers (d) Reducing agents (e) Electrolytic method (f) An ore of sodium.
Solution. Answer: (a) Flame test.
Teacher's Note: Mg has high ionisation enthalpy, so no flame colour.
Exam Note: Mg gives no flame test.
Free study material for Chemistry
Class 11 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 12 S Block Elements Part 2
Download Pradeep's KL Gogia Solutions for Class 11
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 12 S Block Elements Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.