Official Pradeep's KL Gogia Textbook Solutions: Class 11 Chemistry Chapter 10 Principles And Processes Of Extraction Of Elements
Access comprehensive textbook solutions for Chapter 10 Principles And Processes Of Extraction Of Elements using the Pradeep's KL Gogia reference material for Class 11 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Chemistry: Chapter 10 Principles And Processes Of Extraction Of Elements
Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 10 Principles And Processes Of Extraction Of Elements - Pages 1-30
Conceptual Questions
Question Conceptual 1. Why is Fe an abundant element on earth and why are the elements with high atomic numbers increasingly rare? (N.C.E.R.T.)
Solution. Fe, because of its high nuclear binding energy, is very stable and hence is an abundant element on the earth. As the atomic number increases, the neutron/proton, i.e., n/p ratio increases. As a result, the nuclear binding energy decreases and hence the abundance of elements with high atomic numbers decreases.
Teacher's Note: Abundance follows nuclear stability: Fe has the highest binding energy per nucleon; heavy nuclei have high n/p and are unstable.
Exam Note: Link binding energy and n/p ratio.
Question Conceptual 2. Give examples of igneous and sedimentary rocks. What is the origin of igneous rocks and what is the origin of sedimentary rocks?
Solution. Igneous rocks: granite, basalt, gabbro etc.
Sedimentary rocks: limestone, sandstone, shale, dolomite etc.
Origin. Igneous rocks are formed by gradual cooling and solidification of magma. Sediments are obtained by weathering of igneous rocks. These are brought by rain water, wind, CO2 and humic acid to river banks, sea and lake beds where they get deposited to form sedimentary rocks.
Teacher's Note: Igneous = cooled magma; sedimentary = deposited weathered material. Give two named examples of each.
Exam Note: Examples plus origin each carry marks.
Question Conceptual 3. Metals like Cu, Ag, Zn, Hg and Pb occur in nature as sulphides rather than oxides. Why?
Solution. The cations of these metals, i.e., Cu+, Zn2+, Ag+ and Hg2+ (pseudo inert gas configuration, (n−1)s2p6d10) and Pb2+ (inert pair configuration, ((n−1)s2p6d10ns2) have high polarizing power and hence can easily polarize the bigger sulphide ion than the smaller oxide ion. As a result, sulphides of these metals are more stable than the oxides and hence these metals occur in nature in form of their sulphides rather than oxides.
Teacher's Note: Fajans' rule: highly polarizing d10/inert-pair cations favour the more polarizable, larger S2− ion.
Exam Note: Quote polarizing power and ion size.
Question Conceptual 4. In general which metals do you expect to occur in the native state in nature? Give examples. (N.C.E.R.T.)
Solution. Metals such as Cu, Ag, Au, Pt etc. which lie below hydrogen in the electrochemical series are not readily attacked by oxygen, moisture and CO2 of the atmosphere and hence occur in the native state in nature.
Teacher's Note: Native state needs low reactivity: metals below hydrogen in the electrochemical series resist air and moisture.
Exam Note: State the reason and name examples.
Question Conceptual 5. Copper and silver lie below in the electrochemical series and yet they are found in the combined state as sulphides in nature. Comment. (N.C.E.R.T.)
Solution. As explained in Q. 3, due to high polarising power of their cations, their sulphides are even more stable than the metals.
Teacher's Note: Position in the series is not the only factor; Cu+ and Ag+ strongly polarize S2−.
Exam Note: Refer to polarizing power of cations.
Question Conceptual 6. Metals usually do not occur in nature as nitrates. Why?
Solution. Nitrates of all metals are soluble in water. Therefore, if metal nitrates were present in the crust of earth, these would be slowly and gradually washed by rain water into the sea. It is because of this reason that metals usually do not occur in nature as nitrates.
Teacher's Note: Solubility decides occurrence: soluble nitrates would be leached away by rain into the sea.
Exam Note: Key word: all nitrates are soluble.
Question Conceptual 7. How does NaCN act as a depressant in preventing ZnS from forming the froth? (N.C.E.R.T.)
Solution. NaCN combines with ZnS to form a complex, Na2[Zn(CN)4] on the surface of ZnS and thus prevents it from forming the froth.
ZnS + 4NaCN → Na2[Zn(CN)4] + Na2S (sod. tetracyanozincate(II))
Teacher's Note: In froth floatation of PbS/ZnS, NaCN selectively depresses ZnS by complexing its surface.
Exam Note: Write the equation with complex name.
Question Conceptual 8. Why is it advantageous to roast a sulphide ore to the oxide before reduction? (N.C.E.R.T.)
Solution. The standard free energies (ΔG°) of formation of most of the sulphides are greater than those of CS2 and H2S (CS2 is, in fact, an endothermic compound). Therefore, neither carbon nor hydrogen can reduce metal sulphide to metal. In contrast, the standard free energies of formation of oxides are much lower than those of SO2 and hence oxidation of metal sulphides to metal oxides is thermodynamically favourable. Therefore, it is the common practice to roast sulphide ore to the oxide before reduction.
Teacher's Note: Compare ΔfG° values: sulphides cannot be reduced by C or H2, oxides can.
Exam Note: Argue from free energies, not just 'easier'.
Question Conceptual 9. What is the thermodynamic consideration in the choice of a reducing agent in metallurgy? (N.C.E.R.T.)
Solution. For any spontaneous reaction, the free energy change (ΔG) must be negative: ΔG = ΔH − TΔS. ΔH is the enthalpy change during the reaction, T is the absolute temperature and ΔS is the change in entropy during the reaction.
Consider the conversion of a metal into its oxide, M + O2 → MO2. Here dioxygen, a gas, is used up and a solid metal oxide is formed. Since gases have higher entropy than liquids and solids, ΔS becomes negative. Thus, if temperature is raised, TΔS becomes more negative. Since TΔS is subtracted in the equation, ΔG becomes less negative. Thus, the free energy change increases with an increase in temperature.
Consider the Ellingham diagram (Fig. 10.14) for some metal oxides. (Figure described in words: ΔG° (kJ mol−1) of formation of oxides, per mole of O2, is plotted against temperature, 773 K to 2773 K, as nearly straight lines sloping upwards for Ag, Hg, Ni, Fe, Cr, Ti, Al, Mg and Ca from top to bottom, i.e., the lines for Ag and Hg are the highest, near zero, and those of Mg and Ca the lowest, near −1000 kJ and below; the line for carbon (C → CO) slopes downwards and crosses the others.) From the diagram it is evident that metals for which free energy of formation of their oxides is more negative can reduce those metal oxides for which the free energy of formation of their oxides is less negative. In other words, any metal will reduce the oxide of other metals which lie above it in the Ellingham diagram because the free energy change will become more negative by an amount equal to the difference between the two graphs at that particular temperature. Thus Al reduces FeO, CrO and NiO in Thermite reaction but Al will not reduce MgO at temperature below 1773 K. From the above discussion, it is clear that thermodynamic considerations help us in choosing a suitable reducing agent in metallurgy.
Teacher's Note: Ellingham diagram: a reductant whose oxide line lies lower reduces oxides whose lines lie above it.
Exam Note: Write ΔG = ΔH − TΔS and the diagram rule.
Question Conceptual 10. Carbon monoxide is a more effective reducing agent than carbon below 983 K but above this temperature, reverse is true. How will you explain this? (N.C.E.R.T.)
Solution. When carbon reacts with dioxygen two reactions are possible: C + O2 → CO2 and 2C + O2 → 2CO.
In the first reaction, the volume of CO2 produced is the same as that of O2 used, therefore, ΔS is very small and ΔG does not change with temperature. Thus, the graph of ΔG against T is almost horizontal (Fig. 10.15). The second reaction produces two volumes of CO for every one volume of O2 used. Thus, ΔS is positive and hence ΔG becomes increasingly negative as the temperature increases. Consequently its line on the Ellingham diagram slopes downwards. The two lines for the reactions, C → CO2 and C → CO cross at 983 K. Below this temperature, the reaction leading to the formation of CO2 is energetically more favourable but above 983 K, the formation of CO is preferred. In other words, below 983 K both C and CO can act as a reducing agent but since CO can be more easily oxidised to CO2 than C to CO2, therefore, below 983, CO is a more effective reducing agent than carbon. However, above 983 K, CO is more stable and hence its oxidation to CO2 is less rapid than that of C to CO2, therefore, above 983 K, carbon is a better reducing agent than CO.
(Fig. 10.15, described in words: ΔG° against T from 773 K to 2773 K; the C → CO2 line is nearly horizontal near −400 kJ mol−1, the 2C + O2 → 2CO line slopes steeply downward and crosses it at 983 K; the composite curve is the lower of the two.)
Teacher's Note: C→CO2 line is flat, C→CO slopes down; they cross at 983 K, reversing which reductant is better.
Exam Note: Mention the crossing point at 983 K.
Question Conceptual 11. Which metals are generally extracted by electrolytic processes? Which positions these metals generally occupy in the periodic table? (N.C.E.R.T.)
Solution. Electrolytic process is used for the extraction of active metals like Na, Ca, Mg, Al etc. where all other methods fail. Except Al and few other metals, these metals belong to s-block elements.
Teacher's Note: Highly electropositive metals, whose oxides resist chemical reduction, need electrolysis; most are s-block.
Exam Note: Name examples and mention s-block.
Question Conceptual 12. You are provided with a sample of some impure metals such as zinc, copper and germanium. Which methods would you recommend for the purification of each of these metals? (N.C.E.R.T.)
Solution. (i) Impure zinc contains impurities of cadmium (b.p. 1073 K), lead (b.p. 2024 K) and iron (b.p. 3273 K). The boiling point of zinc is 1180 K. The impure metal is distilled when zinc and cadmium with low boiling points distil over leaving behind lead and iron. The boiling points of Zn and Cd differ by about 100 K, therefore, the mixture of Zn and Cd is again subjected to fractional distillation when low boiling Cd distils over leaving behind zinc metal in the distillation flask.
(ii) The metal zinc may be further purified by electrolytic refining as explained on page 10/17.
(iii) The metal copper is refined by poling.
(iv) The metal germanium may be purified by zone refining as explained on page 10/17-10/18.
Teacher's Note: Match method to impurity: distillation for low-boiling Zn, poling for Cu, zone refining for semiconductor Ge.
Exam Note: Name one method per metal.
Question Conceptual 13. Which method would you suggest for the separation of the metals in the following mixtures? (i) Zn from iron (ii) Copper from magnesium (iii) Rare earths. Give reasons for your choice. (N.C.E.R.T.)
Solution. (i) Zn (b.p. 1180 K) can be easily separated from iron (b.p. 3273 K) by distillation.
(ii) A mixture of Cu and Mg metals is treated with dil. HCl when Mg dissolves forming MgCl2 while copper remains unreacted. The impure copper thus obtained is purified by electrolytic refining. The MgCl2 obtained above is made anhydrous by heating in a current of HCl gas. The anhydrous MgCl2 thus obtained is added to a mixture of molten NaCl and CaCl2 (973–1025 K) and electrolysed when pure Mg gets deposited on the cathode.
(iii) Rare earth metals (i.e., lanthanides abbreviated as Ln) can be separated by fractional crystallization of their simple salts such as nitrates, sulphates, bromates, perchlorates, oxalates or preferably double salts such as Ln(NO3)3·3Mg(NO3)2·24H2O because they crystallize well. Since the solubilities decrease from La to Lu, therefore, salts at the Lu end of the series will crystallize first. The process has to be repeated a number of times to obtain good separations. Non-aqueous solvents such as diethyl ether have been used to separate Nd(NO3)3 and Pr(NO3)3.
Teacher's Note: Use differences in volatility, chemical reactivity (Mg dissolves in HCl, Cu does not) and solubility.
Exam Note: Give method and reason for each part.
Very Short Answer Questions (Carrying 1 Mark)
Question Very Short Answer 1. What is a mineral? How does it differ from an ore?
Solution. The natural materials or the chemical compounds in which the metals occur in the earth are called minerals. The mineral from which the metal is conveniently and economically extracted is called an ore. Thus, all ores are minerals but all minerals are not ores.
Teacher's Note: Ore = mineral that is commercially and economically viable for extraction; bauxite is an ore, clay is not.
Exam Note: Say 'all ores are minerals, not conversely'.
Question Very Short Answer 2. What types of ores are roasted?
Solution. Sulphide ores are roasted to convert them into their oxides.
Teacher's Note: Roasting means heating in excess air below the melting point; it suits sulphides, giving oxide and SO2.
Exam Note: One-line answer: sulphide ores.
Question Very Short Answer 3. Metal sulphides occur mainly in rocks and metal halides in lakes and seas. Explain.
Solution. Metal halides being soluble in water, get dissolved in rain water and are carried to lakes and seas during weathering of rocks. On the other hand, metal sulphides being insoluble are left behind in the rocks as residue.
Teacher's Note: Solubility explains location: soluble halides are washed into water bodies, insoluble sulphides stay in rocks.
Exam Note: Contrast solubility of halides and sulphides.
Question Very Short Answer 4. What are fluxes? How are they useful?
Solution. Flux is a substance which combines with gangue which may still be present in the roasted or calcined ore to form an easily fusible material called the slag.
Teacher's Note: A flux converts infusible gangue into fusible slag that floats and is removed from the molten metal.
Exam Note: Define flux and name its product, slag.
Question Very Short Answer 5. What is a slag?
Solution. A slag is an easily fusible material which is formed when gangue still present in the roasted or the calcined ore combines with the flux. For example, in the metallurgy of iron, CaO (flux) combines with silica gangue to form easily fusible calcium silicate (CaSiO3) slag.
CaCO3 → CaO + CO2 ; CaO + SiO2 → CaSiO3 (slag)
Teacher's Note: Slag = flux + gangue. Acidic gangue (SiO2) needs basic flux (CaO).
Exam Note: Write both equations for full marks.
Question Very Short Answer 6. Why do some metals occur in the native state?
Solution. Metals like Au and Pt, which are not reactive, i.e., are not attacked by O2, moisture and CO2 of the air occur in the native state.
Teacher's Note: Unreactive metals low in the electrochemical series are found free in nature.
Exam Note: Give Au and Pt as examples.
Question Very Short Answer 7. What do you mean by benefaction process?
Solution. The process used to concentrate an ore is called the benefaction (beneficiation) process.
Teacher's Note: Beneficiation = ore dressing: removing gangue before metal extraction, e.g. hydraulic washing, froth floatation.
Exam Note: One-line definition suffices.
Question Very Short Answer 8. What is gangue?
Solution. The earthy and siliceous impurities associated with the ores is called gangue.
Teacher's Note: Gangue is the unwanted earthy matter (sand, clay) that comes with the ore.
Exam Note: Definition: earthy and siliceous impurities.
Question Very Short Answer 9. Define aluminothermy.
Solution. The reduction of oxides of metals like Cr2O3, Fe2O3, Mn3O4 etc. to their metals by aluminium is called aluminothermy.
Teacher's Note: Aluminium's very negative ΔG for Al2O3 lets it reduce less stable oxides (Goldschmidt process).
Exam Note: Quote Al as reductant with examples.
Question Very Short Answer 10. What is cupellation?
Solution. Cupellation is a method used for refining of such silver metals which contain impurities of other metals which form volatile oxides. For example removal of last traces of Pb from Ag.
Teacher's Note: Impure silver is heated in air on a bone-ash cupel; Pb oxidizes and is absorbed or removed.
Exam Note: Mention Pb from Ag.
Question Very Short Answer 11. What is poling?
Solution. Poling is a method used for refining of such metals which contain impurity of the oxide of the metal itself. For example, CuO in crude Cu.
Teacher's Note: Green wood poles release hydrocarbons that reduce Cu2O/CuO in molten blister copper.
Exam Note: Link poling with copper.
Question Very Short Answer 12. What is the principle of zone refining?
Solution. When the molten solution of an impure metal is allowed to cool, the pure metal crystallizes out while the impurities remain in solution.
Teacher's Note: Impurities are more soluble in the melt, so a moving heater sweeps them to one end; used for Ge, Si.
Exam Note: State impurity solubility in melt versus solid.
Question Very Short Answer 13. What is Van Arkel method of obtaining ultrapure metals?
Solution. The impure metal (Ti or Zr) is first converted into its volatile iodide by heating with I2 at some low temperature and then decomposing the volatile iodide at a suitable high temperature to give the pure metal. For example,
Zr(s) + 2I2(g) → ZrI4(g) (at 870 K, impure Zr) and ZrI4(g) → Zr(s) + 2I2(g) (at 2075 K, on a tungsten filament, pure Zr)
Teacher's Note: Reversible iodide formation: low T forms volatile iodide, hot filament decomposes it, giving pure metal.
Exam Note: Write both steps with temperatures.
Question Very Short Answer 14. Give the chemical formula of dolomite and carnallite.
Solution. Dolomite: CaCO3·MgCO3; carnallite: KCl·MgCl2·6H2O.
Teacher's Note: Both are Mg ores; dolomite is a double carbonate and carnallite a hydrated double chloride.
Exam Note: Write formulae exactly with 6H2O.
Question Very Short Answer 15. Give one important ore of aluminium.
Solution. Bauxite (Al2O3·2H2O).
Teacher's Note: Bauxite is the chief ore; cryolite and corundum are other Al minerals.
Exam Note: Give formula with 2H2O.
Question Very Short Answer 16. What is a depressant? Give one example.
Solution. Compounds which prevent the formation of froth in froth-flotation process are called depressants. For example NaCN, can be used as a depressant for ZnS in the separation of ZnS ore from PbS ore. It forms a layer of zinc complex, Na2[Zn(CN)4] on the surface of ZnS and thus prevents it from forming the froth.
Teacher's Note: Depressants let one sulphide float while the other stays in the pulp.
Exam Note: Name NaCN with ZnS/PbS example.
Question Very Short Answer 17. What is the role of a stabilizer in froth-flotation process? (N.C.E.R.T.)
Solution. Chemical compounds like cresols and aniline which tend to stabilize the froth are called froth stabilizers.
Teacher's Note: Stabilizers keep the froth from collapsing so mineral particles can be skimmed off.
Exam Note: Name cresol or aniline.
Question Very Short Answer 18. Which is a better reducing agent at 983 K (or 710°C), carbon or carbon monoxide? (N.C.E.R.T.)
Solution. CO. Above 983, CO being more stable does not act as a good reducing agent but carbon does.
Teacher's Note: 983 K is the crossover in the Ellingham diagram where C and CO lines intersect.
Exam Note: Answer CO; above 983 K carbon is better.
Question Very Short Answer 19. Indicate the temperature at which carbon can be used as a reducing agent for FeO. (N.C.E.R.T.)
Solution. Above 1123 K, carbon can reduce FeO to Fe.
Teacher's Note: Below ~1123 K the C→CO line lies above the FeO line, so reduction is not feasible.
Exam Note: Give 1123 K.
Question Very Short Answer 20. Is it true that under certain conditions Mg can reduce SiO2 and Si can reduce MgO? (N.C.E.R.T.)
Solution. Below 1773 K, Mg can reduce SiO2 but above 1773 K Si can reduce Mg.
Teacher's Note: The Mg and Si oxide lines in the Ellingham diagram cross at 1773 K, reversing the reducing power.
Exam Note: Quote 1773 K crossover.
Question Very Short Answer 21. How is 14C obtained in the atmosphere?
Solution. Due to nuclear reaction between cosmic rays and atmospheric nitrogen, i.e., 147N + 10n → 146C + 11H
Teacher's Note: Cosmic-ray neutrons strike N-14; conserve mass number 15 and atomic number 7 on both sides.
Exam Note: Write the balanced nuclear equation.
Question Very Short Answer 22. Why is the cosmic abundance of Fe very high?
Solution. Due to its very high nuclear binding energy.
Teacher's Note: Fe-56 sits at the peak of binding energy per nucleon, so it is highly stable.
Exam Note: Binding energy is the keyword.
CBSE-PMT (Mains) Special
Question CBSE-PMT Special 1. Define amalgamation? Discuss its use in the purification of gold and silver. Can Fe be purified by this method?
Solution. Iron cannot be purified by this method since Fe does not form amalgam.
(The printed answer covers only the last part. From the chapter's 'Additional Useful Information', p. 10/26: amalgamation is applied in the extraction of noble metals like Au and Ag from their native ores. The principle is that these metals combine with Hg to form amalgams. The crushed ore in the form of slurry is brought in contact with mercury coated over copper or brass plates. The metal particles of Au and Ag form an amalgam with mercury and are retained over the plates. The amalgam is scrapped off from the plates and distilled in iron retorts. Hg distils over leaving behind the metal.)
Teacher's Note: Amalgamation works only for metals that dissolve in Hg; Fe does not, even though iron retorts are used.
Exam Note: Define, give Au/Ag use, then Fe exception.
Question CBSE-PMT Special 2. Cinnabar (HgS) and galena (PbS) on roasting often give their respective metals but zinc blende (ZnS) does not. Explain.
Solution. On roasting all these sulphide ores are partly converted into their respective oxides. Since the oxides of mercury and lead are unstable while that of zinc is stable, therefore, oxides of mercury and lead bring about the reduction of their respective sulphides to the corresponding metals but zinc oxides does not reduce ZnS to Zn metal.
HgS + 2HgO → 3Hg + SO2 (on heating; HgO unstable)
PbS + 2PbO → 3Pb + SO2 (on heating; PbO unstable)
ZnS + 2ZnO → 3Zn + SO2 (ZnO stable, so this does not occur)
Teacher's Note: Self-reduction: partly roasted sulphide reacts with its own oxide; works only if the oxide is thermally unstable.
Exam Note: Stability of HgO, PbO versus ZnO.
Question CBSE-PMT Special 3. Which of the following metals cannot be extracted by the smelting process? Al, Zn, Fe, Pb (West Bengal J.E.E. 2003)
Solution. Aluminium cannot be extracted by the smelting process for the following reasons:
(i) Al is a highly electropositive element having very strong affinity for oxygen. Therefore, Al2O3 is a very stable compound and hence cannot be reduced by carbon.
(ii) Al2O3 when heated with carbon forms aluminium carbide: 2Al2O3 + 9C → Al4C3 + 6CO.
Corrected: the book prints '2Al2O3 + 6C → Al4C3 + 6CO', which is not balanced (6 C on the left, 9 on the right); the balanced equation needs 9C.
Teacher's Note: Al2O3 is too stable for carbon; Al is obtained by electrolysis of molten alumina in cryolite.
Exam Note: Answer Al; give stability reason.
Multiple Choice Questions
Question MCQ 1. During smelting, an additional substance is added which combines with impurities to form a fusible mass. The additional substance is called
(a) Flux (b) Slag (c) Gangue (d) Ore.
Solution. Correct option: (a) Flux.
Teacher's Note: Flux plus gangue gives slag; do not confuse the two.
Exam Note: Flux is added; slag is formed.
Question MCQ 2. The process of isolation of metals by dissolving the ore in a suitable chemical reagent followed by precipitation of the metal by a more electropositive metal is called
(a) Electrometallurgy (b) Hydrometallurgy (c) Electro-refining (d) Zone-refining.
Solution. Correct option: (b) Hydrometallurgy.
Teacher's Note: Cyanide leaching of Ag/Au followed by zinc displacement is hydrometallurgy.
Exam Note: Leaching then displacement: hydrometallurgy.
Question MCQ 3. Smelting involves reduction of metal oxide with
(a) Carbon (b) Carbon monoxide (c) Magnesium (d) Aluminium.
Solution. Correct option: (a) Carbon.
Teacher's Note: Smelting is high-temperature reduction with coke in a furnace.
Exam Note: Smelting uses carbon (coke).
Question MCQ 4. Zone-refining has been employed for preparing ultrapure samples of
(a) Cu (b) Zn (c) Ge (d) Ag.
Solution. Correct option: (c) Ge.
Teacher's Note: Semiconductor-grade Ge, Si, Ga need extreme purity, obtained by zone refining.
Exam Note: Ge, Si, Ga are zone-refined.
Question MCQ 5. Which of the following is an ore of aluminium?
(a) Na3AlF6 (b) Al2O3·2H2O (c) Al2O3 (d) Al2O3·H2O
Solution. Correct option: (b) Al2O3·2H2O.
Teacher's Note: Bauxite is the ore; cryolite is only a mineral.
Exam Note: Bauxite is Al2O3·2H2O.
Question MCQ 6. In the aluminothermite process, aluminium acts as
(a) an oxidising agent (b) a flux (c) a reducing agent (d) a solder.
Solution. Correct option: (c) a reducing agent.
Teacher's Note: Al reduces Fe2O3/Cr2O3 and is itself oxidized (I.I.T. 1983).
Exam Note: Al is the reductant in thermite.
Question MCQ 7. In which of the following minerals, aluminium is not present?
(a) Cryolite (b) Mica (c) Feldspar (d) Fluorspar.
Solution. Correct option: (d) Fluorspar..
Teacher's Note: Fluorspar is CaF2.
Exam Note: Fluorspar CaF2 has no Al (I.I.T. 1993).
Question MCQ 8. An important ore of magnesium is
(a) Malachite (b) Cassiterite (c) Carnallite (d) Galena.
Solution. Correct option: (c) Carnallite.
Teacher's Note: Carnallite KCl·MgCl2·6H2O; malachite is Cu, cassiterite Sn, galena Pb.
Exam Note: Carnallite is the Mg ore (D.P.M.T. 1993).
Question MCQ 9. The salt which is least likely to be found in minerals is
(a) Chloride (b) Sulphate (c) Sulphide (d) Nitrate.
Solution. Correct option: (d) Nitrate..
Teacher's Note: All nitrates are soluble in water.
Exam Note: Soluble nitrates get washed away (D.P.M.T. 1994).
Question MCQ 10. The extraction of which of the following metals involves bessemerisation.
(a) Fe (b) Ag (c) Al (d) Cu.
Solution. Correct option: (d) Cu..
Teacher's Note: Bessemerisation of copper matte blows air through molten Cu2S/FeS.
Exam Note: Bessemer converter: copper (B.H.U. 1994).
Question MCQ 11. Which of the following metals is obtained by leaching the ore with dilute cyanide solution?
(a) Silver (b) Titanium (c) Vanadium (d) Zinc.
Solution. Correct option: (a) Silver.
Teacher's Note: Silver dissolves in NaCN as Na[Ag(CN)2] (A.I.I.M.S. 1994).
Exam Note: Ag and Au are leached with NaCN.
Question MCQ 12. Which method of purification is represented by the equations. Ti + 2I2 (500 K, impure) → TiI4 (1675 K) → Ti + 2I2 (pure)
(a) Cupellation (b) Poling (c) Van Arkel (d) Zone refining.
Solution. Correct option: (c) Van Arkel.
Teacher's Note: Volatile iodide formed and decomposed on hot filament: Van Arkel process (A.I.I.M.S. 1994).
Exam Note: Iodide route means Van Arkel.
Question MCQ 13. Which of the following benefaction processes is used for the mineral Al2O3·2H2O?
(a) Froth-floatation (b) Leaching (c) Liquation (d) Magnetic separation.
Solution. Correct option: (b) Leaching.
Teacher's Note: Bauxite is concentrated by leaching with NaOH (A.I.I.M.S. 1996).
Exam Note: Bauxite: leaching (Bayer process).
Question MCQ 14. The process of concentrating Au and Ag ores is based upon their solubility in
(a) NH3 (b) HNO3 (c) HCl (d) KCN.
Solution. Correct option: (d) KCN..
Teacher's Note: Cyanide forms soluble complexes with Au and Ag (C.B.S.E. P.M.T. 1994).
Exam Note: Cyanide complexation concentrates Au/Ag.
Question MCQ 15. Malachite is an ore of
(a) Iron (b) Zinc (c) Copper (d) Mercury
Solution. Correct option: (c) Copper.
Teacher's Note: Malachite is CuCO3·Cu(OH)2 (M.P.P.M.T. 1998).
Exam Note: Malachite is green copper carbonate.
Question MCQ 16. Which of the following metals is sometimes found in native state in nature?
(a) Aluminium (b) Copper (c) Iron (d) Magnesium.
Solution. Correct option: (b) Copper.
Teacher's Note: Copper is very slowly attacked by air, moisture and CO2 and hence sometimes occurs in native state (M.P.C.E.E. 1999).
Exam Note: Cu is native; Al, Fe, Mg are reactive.
Question MCQ 17. Which of the following metals is most abundant in the earth's crust?
(a) Mg (b) Na (c) Al (d) Fe.
Solution. Correct option: (c) Al.
Teacher's Note: Al is the most abundant metal, after O and Si overall (D.C.E. 1999).
Exam Note: Al is the most abundant metal.
Question MCQ 18. Heating pyrites to remove sulphur is called
(a) Smelting (b) Calcination (c) Liquation (d) Roasting.
Solution. Correct option: (d) Roasting..
Teacher's Note: Pyrites are heated in air, oxidizing S to SO2 (M.P.P.M.T. 2000).
Exam Note: Roasting is heating in excess air.
Question MCQ 19. In the metallurgy of which of the following, cupellation process is used?
(a) Copper (b) Silver (c) Iron (d) Aluminium.
Solution. Correct option: (b) Silver.
Teacher's Note: Cupellation removes Pb traces from silver (M.P.P.M.T. 2000).
Exam Note: Cupellation purifies silver.
Question MCQ 20. In the equation, 4M + 8CN− + 2H2O + O2 → 4[M(CN)2]− + 4OH−, the metal M is
(a) Copper (b) Iron (c) Gold (d) Zinc.
Solution. Correct option: (c) Gold.
Teacher's Note: The cyanide leaching reaction is for Au (and Ag); among the options only gold fits (M.P.C.E.E. 2000).
Exam Note: Au/Ag form [M(CN)2]−.
Question MCQ 21. Which of the following metals is leached by cyanide process.
(a) Ag (b) Na (c) Al (d) Cu.
Solution. Correct option: (a) Ag.
Teacher's Note: Ag is extracted by cyanide leaching (A.I.E.E.E. 2002).
Exam Note: Cyanide process: Ag and Au.
Question MCQ 22. Pyrolusite is a/an
(a) Oxide ore (b) Sulphide ore (c) Carbide ore (d) Not an ore
Solution. Correct option: (a) Oxide ore.
Teacher's Note: Pyrolusite is MnO2 (D.P.M.T. 2002).
Exam Note: Pyrolusite MnO2: oxide ore.
Question MCQ 23. In the extraction of copper from its sulphide ore, the metal is formed by reduction of Cu2O with
(a) FeS (b) CO (c) Cu2S (d) SO2
Solution. Correct option: (c) Cu2S.
Teacher's Note: Self-reduction: 2Cu2O + Cu2S → 6Cu + SO2 (A.I.I.M.S. 2003).
Exam Note: Cu2S reduces Cu2O in the converter.
Question MCQ 24. In the process of extraction of gold, Roasted gold ore + CN− + H2O → [X] + OH− (O2); [X] + Zn → [Y] + Au. Identify the complexes [X] and [Y]
(a) X = [Au(CN)2]−, Y = [Zn(CN)4]2− (b) X = [Au(CN)4]2−, Y = [Zn(CN)4]2− (c) X = [Au(CN)2]−, Y = [Zn(CN)6]4− (d) X = [Au(CN)4]−, Y = [Zn(CN)4]2−
Solution. Correct option: (a) X = [Au(CN)2]−, Y = [Zn(CN)4]2−. Write charges correctly on both complexes.
Teacher's Note: 2[Au(CN)2]− + Zn → [Zn(CN)4]2− + 2Au (I.I.T. 2003).
Exam Note: Au(I) is dicyano; Zn forms tetracyano.
Question MCQ 25. The method of zone refining of metals is based on the principle of
(a) greater mobility of the pure metal than that of the impurity. (b) higher melting point of the impurity than that of the pure metal. (c) greater noble character of the solid metal than that of the impurity. (d) greater solubility of the impurity in the molten state than in the solid.
Solution. Correct option: (d) greater solubility of the impurity in the molten state than in the solid..
Teacher's Note: Impurities are more soluble in the molten zone, so the moving heater carries them to one end.
Exam Note: Zone refining rests on impurity solubility in melt.
Question MCQ 26. The methods chiefly used for the extraction of lead and tin from their ores are respectively
(a) Self reduction and Carbon reduction (b) Self reduction and Electrolytic reduction (c) Carbon reduction and self reduction (d) Cyanide process and Carbon reduction.
Solution. Correct option: (a) Self reduction and Carbon reduction.
Teacher's Note: Galena is partly roasted then self-reduced; cassiterite SnO2 is reduced with carbon.
Exam Note: Pb self-reduction, Sn carbon reduction.
Question MCQ 27. Vapour phase refining of nickel is carried out using
(a) I2 (b) Cl2 (c) HCl (d) CO (e) NO
Solution. Correct option: (d) CO.
Teacher's Note: Mond process: Ni + 4CO → Ni(CO)4, which decomposes to pure Ni (Kerala E.E.E. 2004).
Exam Note: Mond process uses CO.
Question MCQ 28. Thomas slag is
(a) Calcium silicate (b) Calcium phosphate (c) Barium phosphate (d) Strontium silicate (e) Barium silicate
Solution. Correct option: (b) Calcium phosphate.
Teacher's Note: Calcium phosphate is called Thomas slag (Kerala E.E.E. 2004).
Exam Note: Thomas slag: Ca3(PO4)2, a fertilizer.
Question MCQ 29. Silver is obtained from Na[Ag(CN)2] by reaction with
(a) Fe (b) Na (c) Zn (d) Au
Solution. Correct option: (c) Zn.
Teacher's Note: Zn displaces silver from the cyanide complex (C.P.M.T. 2004).
Exam Note: Zinc is the displacing metal.
Question MCQ 30. Which one of the following ores is best concentrated by froth-flotation method?
(a) Malachite (b) Cassiterite (c) Galena (d) Magnetite
Solution. Correct option: (c) Galena.
Teacher's Note: Sulphide ores such as galena are concentrated by froth flotation (A.I.E.E.E. 2004).
Exam Note: Sulphide ores: froth floatation.
Question MCQ 31. During the extraction of iron, slag produced is
(a) CO (b) FeSiO3 (c) MgSiO3 (d) CaSiO3
Solution. Correct option: (d) CaSiO3.
Teacher's Note: CaO + SiO2 → CaSiO3 (J & K C.E.T. 2004).
Exam Note: Blast furnace slag: CaSiO3.
Question MCQ 32. Silver containing lead as an impurity is purified by
(a) Poling (b) Cupellation (c) Levigation (d) distillation
Solution. Correct option: (b) Cupellation.
Teacher's Note: Cupellation oxidizes lead traces in silver on a bone-ash cupel, leaving pure silver.
Exam Note: Cupellation removes Pb from Ag.
Question MCQ 33. Out of the following metals that cannot be obtained by electrolysis of the aqueous solution of their salts is
(a) Ag (b) Cr (c) Cu (d) Mg
Solution. Correct option: (d) Mg. Since the reduction potential of Mg2+ (−2.37 V) is much lower than that of H2O (−0.83 V), therefore, H2O gets reduced in preference of Mg2+ ions (J & K C.E.T. 2004).
Teacher's Note: Compare reduction potentials: water is reduced before Mg2+ in aqueous solution.
Exam Note: Mg needs molten-salt electrolysis.
Question MCQ 34. In the froth-floatation process for benefaction of the ores, the ore particles float because
(a) they are light (b) their surface is not easily wetted by water (c) they bear electrostatic charge (d) they are insoluble.
Solution. Correct option: (b) their surface is not easily wetted by water.
Teacher's Note: Ore particles float because their surface is wetted by oil, not water.
Exam Note: Oil wets ore, water wets gangue.
Question MCQ 35. Mond's process is used for
(a) Ni (b) Al (c) Fe (d) Cu
Solution. Correct option: (a) Ni.
Teacher's Note: Mond process: Ni + 4CO gives volatile Ni(CO)4, decomposed at higher temperature to pure Ni.
Exam Note: Mond process refines nickel.
Additional Questions: Assertion-Reason Type Questions
Question Assertion-Reason 1. Assertion: Ti can be purified by van Arkel process. Reason: TiI4 is a volatile compound which decomposes at a high temperature.
(Key: (a) both assertion and reason are correct and reason is the correct explanation; (b) both are correct but reason is not the correct explanation; (c) assertion is correct but reason is incorrect; (d) assertion is incorrect but reason is correct.)
Solution. Correct option: (a). Both correct, and the reason explains the assertion.
Teacher's Note: Volatile iodide formation then decomposition at high T is the van Arkel principle.
Exam Note: Reason explains assertion: choose (a).
Question Assertion-Reason 2. Assertion: Aluminothermy is used for extraction of chromium from chromium oxide. Reason: Alumina has a high melting point.
(Key: (a) both assertion and reason are correct and reason is the correct explanation; (b) both are correct but reason is not the correct explanation; (c) assertion is correct but reason is incorrect; (d) assertion is incorrect but reason is correct.)
Solution. Correct option: (b). Correct explanation of the assertion: Al is a good reducing agent (not the high melting point of alumina).
Teacher's Note: Both statements true, but the real reason is Al's strong reducing power.
Exam Note: Spot true reason that does not explain.
Question Assertion-Reason 3. Assertion: Ag and Au are extracted by leaching their ores with a dilute solution of NaCN. Reason: Impurities associated with these ores dissolve in NaCN.
(Key: (a) both assertion and reason are correct and reason is the correct explanation; (b) both are correct but reason is not the correct explanation; (c) assertion is correct but reason is incorrect; (d) assertion is incorrect but reason is correct.)
Solution. Correct option: (c). Correct reason: Ag and Au dissolve in NaCN solution to form their soluble complexes.
Teacher's Note: Ag and Au themselves dissolve as cyanide complexes; impurities do not.
Exam Note: Assertion true, reason false: (c).
Question Assertion-Reason 4. Assertion: Carbonates and hydroxide ores are concentrated by froth floatation process. Reason: In froth-floatation process pine oil is used because it preferentially wets the ore particles.
(Key: (a) both assertion and reason are correct and reason is the correct explanation; (b) both are correct but reason is not the correct explanation; (c) assertion is correct but reason is incorrect; (d) assertion is incorrect but reason is correct.)
Solution. Correct option: (d). Correct assertion: sulphide ores are concentrated by froth-floatation process.
Teacher's Note: Froth floatation suits sulphide ores, not carbonates or hydroxides.
Exam Note: Assertion false, reason true: (d).
Additional Questions: True/False Statements
Question True/False 1. Elements found in the combined state are often present as oxides, carbonates, sulphides and silicates.
Solution. True.
Teacher's Note: Combined-state ores are mainly oxides, carbonates, sulphides, halides and silicates.
Exam Note: State True.
Question True/False 2. A mixture of aluminium powder and the metallic oxide (Cr2O3, Fe2O3) etc. is called fusion mixture.
Solution. False. It is called thermite.
Teacher's Note: Al + oxide mixture is thermite; fusion mixture is Na2CO3 + K2CO3.
Exam Note: Correct term is thermite.
Question True/False 3. The naturally occurring material in which the metal is present as stable compound in the earth's crust is called an ore.
Solution. False. It is called a mineral.
Teacher's Note: An ore must also allow economical extraction; every ore is a mineral.
Exam Note: Mineral versus ore distinction.
Question True/False 4. The process employed to concentrate an ore is called the beneficiation process.
Solution. True.
Teacher's Note: Beneficiation means concentrating the ore: washing, floatation, leaching, magnetic separation.
Exam Note: State True.
Question True/False 5. Leaching is a process by which a particular mineral in an ore can be dissolved selectively by using certain acids, bases or other reagents.
Solution. True.
Teacher's Note: Leaching selectively dissolves the ore, e.g. bauxite in NaOH, silver in NaCN.
Exam Note: State True.
Question True/False 6. The removal of impurities from an ore by forming salts is called slagging operation.
Solution. True.
Teacher's Note: Flux combines with gangue to form fusible slag, a salt such as CaSiO3.
Exam Note: State True.
Question True/False 7. Metals which are highly reactive cannot be obtained by electrolytic reduction.
Solution. False.
Teacher's Note: Highly reactive metals (Na, Mg, Al) are obtained only by electrolytic reduction.
Exam Note: Reverse of the true statement.
Additional Questions: Fill In The Blanks
Question Fill in the Blank 1. An ore is a .... from which the metal can be extracted conveniently and economically.
Solution. Answer: mineral.
Teacher's Note: An ore is a mineral that is commercially worth extracting.
Exam Note: Ore is a type of mineral.
Question Fill in the Blank 2. The materials like stone, rock and earthy impurities present in naturally occurring ores are known as .....
Solution. Answer: gangue.
Teacher's Note: Gangue is the unwanted earthy matter removed during concentration.
Exam Note: Say gangue (matrix).
Question Fill in the Blank 3. A sulphide ore is generally roasted in order to convert it into ....
Solution. Answer: its oxide.
Teacher's Note: Roasting in air turns sulphides into oxides with SO2 evolved.
Exam Note: Roasting: sulphide to oxide.
Question Fill in the Blank 4. Highly electropositive metals like alkali metals are obtained by ....
Solution. Answer: electrolytic reduction.
Teacher's Note: Na, K, Ca are obtained by electrolysis of fused salts as no chemical reductant is strong enough.
Exam Note: Fused-salt electrolysis.
Question Fill in the Blank 5. Low melting metals like lead are refined by ....
Solution. Answer: liquation.
Teacher's Note: Low melting Pb or Sn flows off the sloping hearth leaving high melting impurities.
Exam Note: Liquation is for low melting metals.
Question Fill in the Blank 6. Process of heating the ore in excess of air is known as ....
Solution. Answer: roasting.
Teacher's Note: Roasting is done below the melting point in excess air; calcination is in limited air.
Exam Note: Roasting: excess air.
Question Fill in the Blank 7. Sodium cyanide solution is used to extract .... from its ores.
Solution. Answer: silver or gold.
Teacher's Note: NaCN leaching forms soluble Ag and Au cyanide complexes.
Exam Note: Ag and Au are leached.
Additional Questions: Matching Type Questions
Question Matching 1. Match items given in Column A against those given in Column B.
Column A: 1. Bauxite; 2. Galena; 3. Alkali metals are extracted by; 4. concentration of sulphide ore; 5. concentration of ore; 6. Sodium chloride; 7. Sodium bicarbonate is used in; 8. Alkali metals are; 9. Alkaline earth metals are; 10. Magnesium does not give
Column B: (a) Flame test; (b) s-Block elements; (c) Froth-floatation; (d) Fire extinguishers; (e) Reducing agents; (f) Electrolytic method; (g) Benefaction; (h) Al2O3·2H2O; (i) An ore of sodium; (j) PbS
Solution. 1 → (h); 2 → (j); 3 → (f); 4 → (c); 5 → (g); 6 → (i); 7 → (d); 8 → (e); 9 → (b); 10 → (a).
Teacher's Note: Match by chemistry: Mg's flame test is absent because its excitation energy is too high.
Exam Note: Write number-letter pairs clearly.
Free study material for Chemistry
Pradeep's KL Gogia Solutions for Class 11 Mathematics: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 10 Principles And Processes Of Extraction Of Elements
Access Class 11 Mathematics Solutions
Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 10 Principles And Processes Of Extraction Of Elements PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.