Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 9 Redox Reactions Part 2

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Chemistry Chapter 09 Redox Reactions

Explore reliable textbook solutions for Chapter 09 Redox Reactions tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 09 Redox Reactions Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Redox Reactions - Pages 36-70

9.15 Electromotive Series: Problems

Question Example 9.19. The standard electrode potential corresponding to the reaction Au3+(aq) + 3e− → Au(s) is 1.50 V. Predict if gold can be dissolved in 1 M HCl solution and on passing hydrogen gas through gold salt solution, metallic gold will be precipitated or not.

Solution. Consider the half reactions: 2H+(aq) + 2e− → H2(g); E° = 0.0 V and Au3+(aq) + 3e− → Au(s); E° = 1.50 V. Since E° for Au3+/Au is higher than that for H+/½H2 (0.0 V), Au3+ can be more easily reduced than H+ ions. This implies that Au3+ ions can be reduced to metallic gold by H2 gas, but H+ ions cannot oxidise metallic gold to Au3+. In other words, metallic gold does not dissolve in 1 M HCl. Instead H2 gas can reduce Au3+ to gold, so metallic gold will be precipitated from gold salt solution.

Teacher's Note: Metals dissolve in acid only if E° is below 0 V; gold is +1.50 V.

Exam Note: Compare E° with 0.00 V and state both conclusions.

Question Problems for Practice 1(a). With the help of Table 9.1 select the oxidant which can oxidise Cl−(aq) to Cl2(g).

Solution. All species having E° higher than Cl−/Cl2 electrode, i.e., F2, MnO4−, Au3+, acidified H2O2, Co3+ etc.

Teacher's Note: An oxidant works only if its reduction potential exceeds that of the couple being oxidised (1.36 V).

Exam Note: Quote E° comparison from the table.

Question Problems for Practice 1(b). With the help of Table 9.1 select the oxidant which can oxidise Fe(s) to Fe2+(aq).

Solution. All species having E° higher than Fe2+/Fe, i.e., Ni2+, Sn2+, Cu2+, I2, O2, Ag+, Hg2+, NO3−, Br2, Cr2O72− and all other oxidants listed under Ans. 1(a).

Teacher's Note: Fe/Fe2+ is at −0.44 V, so every couple above it in value can oxidise iron.

Exam Note: List several species with E° greater than −0.44 V.

Question Problems for Practice 1(c). With the help of Table 9.1 select the oxidant which can oxidise I−(aq) to I2(aq).

Solution. All species having E° higher than I−/I2 couple, i.e., Br2, Cr2O72−, Cl2, and other oxidants listed under Ans. 1(a).

Teacher's Note: Iodide is oxidised by any couple with E° above +0.54 V.

Exam Note: Name at least two oxidants with E° above 0.54 V.

Question Problems for Practice 2(a). With the help of Table 9.1 select the reducing agent which can reduce Ag+(aq) to its metallic state.

Solution. All metals having E° lower than Ag+/Ag electrode, i.e., Mg, Al, Zn, Fe, Sn etc.

Teacher's Note: A reducing agent must have a lower reduction potential than the ion to be reduced.

Exam Note: Compare E° values, lower one reduces higher one.

Question Problems for Practice 2(b). With the help of Table 9.1 select the reducing agent which can reduce Al3+(aq) to its metallic state.

Solution. All metals having E° lower than Al3+/Al, i.e., Li, K, Ca, Na, Mg etc.

Teacher's Note: Al3+/Al is −1.66 V, so only very reactive metals can reduce it.

Exam Note: Choose metals with E° below −1.66 V.

Question Problems for Practice 2(c). With the help of Table 9.1 select the reducing agent which can reduce Ni2+(aq) to its metallic state.

Solution. All metals having E° lower than Ni2+/Ni, i.e., Fe, Cr, Zn, Al, Mg, Na, Ca, K, Li etc.

Teacher's Note: Any metal below Ni2+/Ni (−0.25 V) in the series displaces nickel.

Exam Note: List metals with E° below −0.25 V.

Question Problems for Practice 3. Identify the strongest and weakest reducing agents from the following metals: Zn, Cu, Ag, Na, Sn.

Solution. Among the elements listed, Na has the most negative E° and hence it is the strongest reducing agent, while Ag has the highest E° and hence it is the weakest reducing agent.

Teacher's Note: Reducing power increases as E° (reduction) becomes more negative.

Exam Note: Order the five metals by E° first.

9.16 EMF of an Electrochemical Cell

Question Example 9.20. A cell is prepared by dipping a chromium rod in 1 M Cr2(SO4)3 solution and an iron rod in 1 M FeSO4 solution. The standard reduction potentials of chromium and iron electrodes are −0.75 V and −0.45 V respectively. (a) What will be the cell reaction? (b) What will be the standard EMF of the cell? (c) Which electrode will act as anode? (d) Which electrode will act as cathode?

Solution. The two half cell reduction equations are: Fe2+(aq) + 2e− → Fe(s); E° = −0.45 V ...(i); Cr3+(aq) + 3e− → Cr(s); E° = −0.75 V ...(ii). Since Cr3+/Cr electrode has lower reduction potential, it acts as the anode while Fe2+/Fe electrode with higher electrode potential acts as the cathode. To equalise the number of electrons, multiply Eq. (i) by 3 and Eq. (ii) by 2 (but do not multiply their E° values): 3Fe2+(aq) + 6e− → 3Fe(s); E° = −0.45 V ...(iii); 2Cr3+(aq) + 6e− → 2Cr(s); E° = −0.75 V ...(iv). Subtracting Eq. (iv) from Eq. (iii) gives the cell reaction: 2Cr(s) + 3Fe2+(aq) → 2Cr3+(aq) + 3Fe(s); E°cell = −0.45 − (−0.75) = +0.30 V. Thus, the EMF of the cell is +0.30 V. (a) 2Cr + 3Fe2+ → 2Cr3+ + 3Fe; (b) +0.30 V; (c) chromium electrode is the anode; (d) iron electrode is the cathode.

Teacher's Note: E° is an intensive property: never multiply it by the stoichiometric factor when balancing electrons.

Exam Note: Lower E° is anode; E°cell = E°cathode − E°anode.

Question Example 9.21. The half cell reactions with their oxidation potentials are: Pb(s) → Pb2+(aq) + 2e−; E°oxi = +0.13 V; Ag(s) → Ag+(aq) + e−; E°oxi = −0.80 V. Write the cell reaction and calculate its EMF.

Solution. Rewrite the two equations in the reduction form: Pb2+(aq) + 2e− → Pb(s); E° = −0.13 V ...(i); Ag+(aq) + e− → Ag(s); E° = +0.80 V ...(ii). To obtain the equation for the cell reaction, multiply Eq. (ii) by 2 and subtract from Eq. (i): Pb(s) + 2Ag+(aq) → Pb2+(aq) + 2Ag(s); E°cell = +0.80 − (−0.13) = +0.93 V.

Teacher's Note: Convert oxidation potentials to reduction potentials by reversing the sign before using E°cell = E°R − E°L.

Exam Note: Doubling the Ag equation changes the electrons, not its E°.

Problems for Practice (EMF of Cells)

Question EMF Problems for Practice 1. Calculate the standard e.m.f. of the cells formed by different combinations of the following half cells: Zn(s) | Zn2+(aq), Cu(s) | Cu2+(aq), Ni(s) | Ni2+(aq), and Ag(s) | Ag+(aq).

Solution. (i) Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s): E°cell = +0.34 − (−0.76) = +1.1 V. (ii) Zn(s) | Zn2+(aq) || Ni2+(aq) | Ni(s): E°cell = −0.44 − (−0.76) = +0.22 V. (iii) Zn(s) | Zn2+(aq) || Ag+(aq) | Ag(s): E°cell = +0.80 − (−0.76) = +1.56 V. (iv) Ni(s) | Ni2+(aq) || Cu2+(aq) | Cu(s): E°cell = +0.340 − (−0.44) = +0.78 V. (v) Ni(s) | Ni2+(aq) || Ag+(aq) | Ag(s): E°cell = +0.80 − (−0.44) = +1.24 V. (vi) Cu(s) | Cu2+(aq) || Ag+(aq) | Ag(s): E°cell = +0.80 − (+0.34) = +0.46 V.

Teacher's Note: Four half cells give six combinations; in each, the higher E° electrode is the cathode.

Exam Note: Write each cell notation, then subtract anode from cathode E°.

Question EMF Problems for Practice 2. A cell is prepared by dipping a copper rod in 1 M copper sulphate solution and a zinc rod in 1 M ZnSO4 solution. The standard reduction potentials of copper and zinc are 0.34 V and −0.76 V respectively. (i) What is the cell reaction? (ii) What will be the standard electromotive force (EMF) of the cell? (iii) Which electrode will be positive? (iv) How will the cell be represented?

Solution. (i) Zn(s) + CuSO4(aq) → ZnSO4(aq) + Cu(s). (ii) E°cell = 1.1 V. (iii) Cu electrode is positive. (iv) Zn | ZnSO4(1 M) || CuSO4(1 M) | Cu.

Teacher's Note: Cathode (reduction, higher E°) is the positive pole in a galvanic cell; anode is negative.

Exam Note: Write the cell notation with anode on the left.

Question EMF Problems for Practice 3. The following cell is set up between copper and silver electrodes: Cu | Cu2+ || Ag+ | Ag. If its two half cells work under standard conditions, calculate the e.m.f. of the cell. [Given E°Cu2+/Cu(E°red) = +0.34 volt; E°Ag+/Ag(E°red) = +0.80 volt] (A.I.S.B. 1986, P.S.B. 1988, 1989)

Solution. E°cell = E°cathode − E°anode = 0.80 − 0.34 = 0.46 volt.

Teacher's Note: Silver is at the right (cathode), so it is the larger E° term.

Exam Note: Show subtraction with sign and unit.

Question EMF Problems for Practice 4. Write the cell reaction and calculate the standard E° of the cell: Zn | Zn2+(1 M) || Cd2+(1 M) | Cd. Given E°Zn2+, Zn = −0.763 V, E°Cd2+, Cd = −0.403 V.

Solution. Cell reaction: Zn + Cd2+ → Zn2+ + Cd. E°cell = −0.403 − (−0.763) = 0.360 volt.

Teacher's Note: Both potentials are negative; subtract carefully, the result is positive.

Exam Note: Give reaction and E° with units.

Question EMF Problems for Practice 5. The standard EMF of the cell Ni | Ni2+ || Cu2+ | Cu is 0.59 V. The standard electrode potential (reduction potential) of copper electrode is 0.34 V. Calculate the standard potential of nickel electrode.

Solution. E°cell = E°Cu − E°Ni, so 0.59 = 0.34 − E°Ni, giving E°Ni2+/Ni = −0.25 V.

Teacher's Note: Rearrange E°cell = E°R − E°L to find the unknown electrode.

Exam Note: Check sign: nickel is the anode, so negative.

Question EMF Problems for Practice 6. Calculate the e.m.f. (E°) of the following half cells: Ag | Ag+(1 M) || Cu2+(1 M) | Cu; E° = −0.46 V. Zn | Zn2+(1 M) || Cu2+(1 M) | Cu; E° = +1.10 V. Calculate the e.m.f. of the cell Zn | Zn2+(1 M) || Ag+(1 M) | Ag. (A.I.S.B. 1989)

Solution. E°Zn|Ag = E°Zn|Cu − E°Ag|Cu = 1.10 − (−0.46) = 1.56 V.

Teacher's Note: Cell potentials with a common electrode add or subtract like electrode potentials.

Exam Note: Chain the two given cells through copper.

Question EMF Problems for Practice 7. Two half cells Al3+(aq)/Al and Mg2+(aq)/Mg. The reduction potentials of these half cells are −1.66 V and −2.36 V respectively. Calculate the cell potential. Write the cell reaction also. (P.S.B. 1997)

Solution. Mg has the lower reduction potential, so it is the anode. E°cell = −1.66 − (−2.36) = 0.70 V. Cell reaction: 3Mg + 2Al3+ → 3Mg2+ + 2Al.

Teacher's Note: Balance electrons (6 e−) in the reaction but leave E° unmultiplied.

Exam Note: Identify anode first, then write balanced reaction.

Question EMF Problems for Practice 8. Calculate E° for the cell Al | Al3+(1 M) || Cu2+(1 M) | Cu. Given E°Al3+/Al and E°Cu2+/Cu as −1.66 V and 0.34 V respectively. (H.P.S.B. 1997)

Solution. E°cell = 0.34 − (−1.66) = 2.0 V.

Teacher's Note: Subtracting a negative anode potential increases the cell EMF.

Exam Note: Write formula, substitute, state 2.0 V.

Question MCQ 49. The pair of compounds having metals in their highest oxidation state is (a) MnO2, FeCl3 (b) MnO4−, CrO2Cl2 (c) [Fe(CN)6]3−, [Co(CN)3] (d) [NiCl4]2−, [CoCl4]− (I.I.T. 2004)

Solution. Correct option: (b) MnO4−, CrO2Cl2.

Teacher's Note: Mn is +7 in MnO4− and Cr is +6 in CrO2Cl2, both equal to their group numbers.

Exam Note: Highest state equals group number for Mn and Cr.

Question MCQ 50. Consider the following E° values: E°Fe3+/Fe2+ = 0.77 V, E°Sn2+/Sn = −0.14 V. Under standard conditions, the potential for the reaction Sn(s) + 2Fe3+(aq) → 2Fe2+(aq) + Sn2+(aq) is (a) 0.63 V (b) 1.40 V (c) 0.91 V (d) 1.68 V (A.I.E.E.E. 2004)

Solution. Correct option: (c) 0.91 V.

Teacher's Note: E° = 0.77 − (−0.14) = 0.91 V.

Exam Note: Do not multiply E° by the factor 2.

Question MCQ 51. The E°M3+/M2+ values for Cr, Mn, Fe and Co are −0.41, +1.57, +0.77 and +1.97 V respectively. For which one of these metals, the change in oxidation state from +2 to +3 is easiest? (a) Co (b) Mn (c) Fe (d) Cr (A.I.E.E.E. 2004)

Solution. Correct option: (d) Cr.

Teacher's Note: The lowest E° (−0.41 V, Cr) means M2+ is oxidised to M3+ most easily.

Exam Note: Lowest reduction potential, easiest oxidation.

Question MCQ 52. Excess of KI reacts with CuSO4 solution and then Na2S2O3 solution is added to it. Which of the statements is incorrect for this reaction? (a) Evolved I2 is reduced (b) CuI2 is formed (c) Na2S2O3 is oxidised (d) Cu2I2 is formed (A.I.E.E.E. 2004)

Solution. Correct option: (b) CuI2 is formed.

Teacher's Note: Cu(II) with iodide gives Cu2I2 and I2; CuI2 is not stable.

Exam Note: Cu2+ oxidises I−, so cuprous iodide forms.

Question MCQ 53. The oxidation number of carbon in CH2Cl2 is (a) 0 (b) 2 (c) 3 (d) 5 (A.F.M.C. 2004)

Solution. Correct option: (a) 0.

Teacher's Note: x + 2(+1) + 2(−1) = 0 gives x = 0.

Exam Note: Cl is −1 and H is +1.

Question MCQ 54. What is the equivalent mass of IO4− when it is converted into I2 in acid medium? (a) M/6 (b) M/7 (c) M/5 (d) M/4 (e) none of these (Kerala M.E.E. 2004)

Solution. Correct option: (b) M/7.

Teacher's Note: Iodine falls from +7 to 0, gaining 7 e−, so equivalent mass is M/7.

Exam Note: Divide by the oxidation number change.

Question MCQ 55. aK2Cr2O7 + bKCl + cH2SO4 → xCrO2Cl2 + yKHSO4 + zH2O. The above equation balances when (a) a = 2, b = 4, c = 6 and x = 2, y = 6, z = 3 (b) a = 4, b = 2, c = 6 and x = 6, y = 2, z = 3 (c) a = 6, b = 4, c = 2 and x = 6, y = 3, z = 2 (d) a = 1, b = 4, c = 6 and x = 2, y = 6, z = 3 (e) a = 1, b = 6, c = 4 and x = 6, y = 2, z = 3 (Kerala E.E.E. 2004)

Solution. Correct option: (d) a = 1, b = 4, c = 6 and x = 2, y = 6, z = 3.

Teacher's Note: Balanced: K2Cr2O7 + 4KCl + 6H2SO4 → 2CrO2Cl2 + 6KHSO4 + 3H2O (chromyl chloride test).

Exam Note: Check K, Cl, S and O counts for the chosen option.

Question MCQ 56. Aluminium displaces hydrogen from dilute HCl whereas silver does not. The E.M.F. of the cell prepared by combining Al/Al3+ and Ag/Ag+ is 2.46 V. The reduction potential of silver electrode is +0.80 V. The reduction potential of aluminium electrode is (a) +1.66 V (b) −3.26 V (c) 3.26 V (d) −1.66 V (Karnataka C.E.T. 2004)

Solution. Correct option: (d) −1.66 V.

Teacher's Note: E°cell = 0.80 − E°Al = 2.46, so E°Al = −1.66 V.

Exam Note: Al displaces H2, so its E° must be negative.

Question MCQ 57. Which of the following statements is true for the electrochemical Daniell cell? (a) Electrons flow from copper electrode to zinc electrode (b) Current flows from zinc electrode to copper electrode (c) Cations move towards copper electrode (d) Cations move towards zinc electrode (A.I.I.M.S. 2004)

Solution. Correct option: (c) Cations move towards copper electrode.

Teacher's Note: Electrons flow Zn to Cu externally (current Cu to Zn); cations move towards the cathode (copper) inside the cell.

Exam Note: Cathode attracts cations; current opposes electron flow.

Question MCQ 58. Which is the best description of the behaviour of bromine in the reaction given below? H2O + Br2 → HOBr + HBr (a) Proton acceptor only (b) Both oxidised and reduced (c) Oxidised only (d) Reduced only (C.B.S.E. P.M.T. 2004)

Solution. Correct option: (b) Both oxidised and reduced.

Teacher's Note: Br goes 0 to +1 (HOBr) and 0 to −1 (HBr): disproportionation.

Exam Note: Same element forms higher and lower oxidation states.

Question MCQ 59. In a galvanic cell, the electrons flow from (a) anode to cathode through the solution (b) cathode to anode through the solution (c) anode to cathode through the external circuit (d) cathode to anode through the external circuit (Karnataka C.E.T. 2004)

Solution. Correct option: (c) anode to cathode through the external circuit.

Teacher's Note: Oxidation at the anode releases electrons that travel through the wire to the cathode; ions carry charge in solution.

Exam Note: Electrons never cross the electrolyte.

Question MCQ 60. An aqueous solution containing one mole per litre of each Cu(NO3)2, AgNO3, Hg2(NO3)2, Mg(NO3)2 is being electrolysed using inert electrodes. The values of standard electrode potential (reduction potential) are Ag+/Ag = +0.80, Hg+/Hg = +0.79, Cu2+/Cu = +0.34 V, Mg2+/Mg = −2.37. With increasing voltage, the sequence of deposition of metals on cathode will be (a) Ag, Hg, Cu, Mg (b) Mg, Cu, Hg, Ag (c) Ag, Hg, Cu (d) Cu, Hg, Ag (e) Cu, Hg, Ag, Mg (I.I.T. 1984; Kerala M.E.E. 2004)

Solution. Correct option: (c) Ag, Hg, Cu.

Teacher's Note: Higher E° deposits first: Ag, Hg, Cu; Mg2+ is not discharged from water (H2 evolves instead).

Exam Note: Order by decreasing E° and drop Mg.

Question MCQ 61. Cr2O72− + X (H+) → Cr3+ + H2O + oxidised product. X in the above reaction cannot be (a) C2O42− (b) Fe2+ (c) SO42− (d) S2− (C.P.M.T. 2004)

Solution. Correct option: (c) SO42−.

Teacher's Note: Sulphate has S at its maximum +6 and cannot be oxidised; the others are reductants.

Exam Note: X must be a reducing agent.

Additional Questions: Assertion-Reason Type Questions

Question Assertion-Reason 1. Assertion: Blue colour of CuSO4 solution fades away when iron plate is placed in it. Reason: Cu2+ ion is oxidised by Fe. (Key: (a) both correct and reason explains; (b) both correct but reason does not explain; (c) assertion correct, reason incorrect; (d) both incorrect.)

Solution. Option (c): the assertion is correct but the reason is incorrect. Correct reason: Cu2+ is reduced by Fe.

Teacher's Note: Fe displaces Cu: Cu2+ gains electrons (reduced), and the blue colour of Cu2+ fades.

Exam Note: State assertion true; correct the reason to reduction.

Question Assertion-Reason 2. Assertion: Copper liberates hydrogen from a dilute solution of hydrochloric acid. Reason: Hydrogen is below copper in the electrochemical series. (A.I.I.M.S. 1995)

Solution. Option (d): both assertion and reason are incorrect. Correct assertion: Copper does not liberate hydrogen from a dilute solution of hydrochloric acid. Correct reason: Copper lies below hydrogen in the electrochemical series.

Teacher's Note: Cu (+0.34 V) is above H+/H2 (0.00 V) in E° value, so it cannot reduce H+.

Exam Note: Correct both statements, do not just say false.

Question Assertion-Reason 3. Assertion: Zinc displaces copper from copper sulphate solution. Reason: E° of Zn is −0.76 V and that of Cu is +0.34 V. (A.I.I.M.S. 1999)

Solution. Option (a): both assertion and reason are correct and the reason is the correct explanation of the assertion.

Teacher's Note: Lower E° of Zn explains displacement; cell E° = 0.34 + 0.76 = 1.10 V.

Exam Note: Link the E° values to spontaneity.

Additional Questions: True/False Statements

Question True/False 1. Oxidation is a process which involves loss of electrons.

Solution. True.

Teacher's Note: Oxidation is loss of electrons and rise in oxidation number.

Exam Note: State true, with a reason.

Question True/False 2. Reducing agents are electron acceptors.

Solution. False. Corrected statement: Reducing agents are electron donors.

Teacher's Note: Reducing agents donate electrons; oxidising agents accept them.

Exam Note: Rewrite the false statement correctly.

Question True/False 3. Copper metal can be oxidised by Zn2+ ions.

Solution. False. Corrected statement: Zinc metal can be oxidised by Cu2+ ions (Cu cannot be oxidised by Zn2+, since E° of Zn is lower).

Teacher's Note: Zn2+ (−0.76 V) is a weaker oxidant than Cu2+ (+0.34 V).

Exam Note: Reverse the roles of Zn and Cu.

Question True/False 4. Cl2 can oxidise Br− ion to Br2.

Solution. True.

Teacher's Note: E° of Cl2/Cl− (1.36 V) exceeds Br2/Br− (1.09 V).

Exam Note: Compare the two halogen E° values.

Question True/False 5. Copper sulphate solution can be placed in a vessel made of zinc.

Solution. False. Corrected statement: Copper sulphate solution cannot be placed in a vessel made of zinc, because zinc displaces copper.

Teacher's Note: Zn reduces Cu2+ (cell E° +1.10 V), so the vessel would corrode.

Exam Note: Mention displacement reaction Zn + Cu2+.

Question True/False 6. Stock notation is used to name compounds of metals which involve variable oxidation states.

Solution. True.

Teacher's Note: Stock notation gives the oxidation number in Roman numerals, e.g. iron(III) chloride.

Exam Note: State what Stock notation shows.

Question True/False 7. The oxidation number of N in NF3 is +3.

Solution. True.

Teacher's Note: F is more electronegative: x + 3(−1) = 0 gives N = +3.

Exam Note: Show the algebraic sum.

Question True/False 8. Metals whose electrode potentials are lower than that of standard hydrogen electrode react with aqueous mineral acids to evolve H2 gas.

Solution. True.

Teacher's Note: Negative E° means the metal reduces H+ to H2.

Exam Note: Compare E° with 0.00 V of SHE.

Question True/False 9. HgCl2 and SnCl2 cannot exist as such if present together in an aqueous solution.

Solution. True.

Teacher's Note: Sn(II) reduces Hg(II) to Hg2Cl2 (or Hg), so they react together.

Exam Note: Name the redox reaction between them.

Additional Questions: Fill in the Blanks

Question Fill in the Blanks 1. Oxidising agents are ............ while reducing agents are ............ .

Solution. Electron acceptors; electron donors.

Teacher's Note: An oxidant gains electrons, a reductant loses them.

Exam Note: Fill both blanks in order.

Question Fill in the Blanks 2. In oxidation, the oxidation number of an element ............ while in reduction, it ............ .

Solution. Increases; decreases.

Teacher's Note: Oxidation raises, reduction lowers the oxidation number.

Exam Note: Order matters: increases, then decreases.

Question Fill in the Blanks 3. A substance which increases the oxidation number of some other substance in a chemical reaction is called an ............ .

Solution. Oxidising agent.

Teacher's Note: The oxidising agent itself is reduced.

Exam Note: Name the agent, not the process.

Question Fill in the Blanks 4. The oxidation number of N in NI3 is ............ .

Solution. −3.

Teacher's Note: Nitrogen (3.0) is more electronegative than iodine (2.5), so it takes the negative number.

Exam Note: Give sign as well as value.

Question Fill in the Blanks 5. The tendency of an electrode to gain or lose electrons is called ............ .

Solution. Electrode potential.

Teacher's Note: Electrode potential measures tendency to lose (oxidation) or gain (reduction) electrons.

Exam Note: Two words: electrode potential.

Question Fill in the Blanks 6. Standard electrode potentials are measured under ............ concentration of metal ions and a temperature of ............ .

Solution. 1.0 molar; 298 K.

Teacher's Note: Standard conditions are 1 M, 298 K (and 1 bar for gases).

Exam Note: Write units with both values.

Question Fill in the Blanks 7. The standard electrode potentials of single electrodes are measured with reference to ............ .

Solution. Standard hydrogen electrode.

Teacher's Note: SHE is assigned 0.00 V as the reference.

Exam Note: Use full name; SHE alone is acceptable.

Question Fill in the Blanks 8. In the electrochemical series, the elements are arranged in order of their increasing ............ .

Solution. Electrode potentials.

Teacher's Note: Increasing reduction potential runs from Li to F2.

Exam Note: Write reduction (electrode) potentials.

Question Fill in the Blanks 9. The compound YbBa2Cu3O7, which shows superconductivity, has copper in oxidation state ............ . Assume that the rare earth element ytterbium is in the usual +3 oxidation state. (I.I.T. 1994)

Solution. 7/3 (average oxidation state of copper).

Teacher's Note: Neutral compound: 3 + 4 + 3x = 14, so x = 7/3.

Exam Note: Set up the neutral compound equation.

Additional Questions: Matching Type Questions

Question Matching 1. Match the appropriate entries in columns X and Y. X: 1. Fluorine; 2. Zinc, magnesium, iron etc. react with dil. H2SO4 to evolve; 3. Stannous chloride. Y: (a) Liberates Cl2 from Cl− ions; (b) Reduces HgCl2 to Hg2Cl2; (c) Hydrogen gas.

Solution. 1 → (a); 2 → (c); 3 → (b).

Teacher's Note: F2 is the strongest oxidant; SnCl2 is a reductant; active metals evolve H2.

Exam Note: Give all three pairs.

9.16.1 To Predict the Spontaneity of a Redox Reaction

Question Example 9.22. Predict whether zinc and silver react with 1 M sulphuric acid to give out hydrogen. Given that the standard potentials of zinc and silver are −0.76 volt and +0.80 volt respectively.

Solution. (a) To predict the reaction of zinc with sulphuric acid: if Zn reacts, the reaction would be Zn + H2SO4 → ZnSO4 + H2, i.e., Zn + 2H+ → Zn2+ + H2. The cell is Zn | Zn2+ || H+ | H2. Standard EMF of the cell E°cell = E°right − E°left = 0 − (−0.76) = +0.76 volt. Thus the EMF of the cell comes out to be positive. Hence the reaction takes place. (b) Similarly, to predict the reaction of silver with sulphuric acid: if Ag reacts, 2Ag + H2SO4 → Ag2SO4 + H2, i.e., 2Ag + 2H+ → 2Ag+ + H2. The cell is Ag | Ag+ || H+ | H2. E°cell = 0 − 0.80 = −0.80 volt. Thus the EMF of the supposed cell comes out to be negative. Hence this reaction does not take place.

Teacher's Note: A redox reaction is spontaneous only when the E°cell of the supposed cell is positive.

Exam Note: Write the supposed cell, compute E°cell, then state the sign.

Question Example 9.23. Can a solution of 1 M copper sulphate be stored in a vessel made of nickel metal? Given that E°Ni, Ni2+ = +0.25 volt, E°Cu, Cu2+ = −0.34 volt; or is it possible to store copper sulphate solution in a nickel vessel? (N.C.E.R.T.)

Solution. We want to see whether the reaction Ni + CuSO4 → NiSO4 + Cu, i.e., Ni + Cu2+ → Ni2+ + Cu, takes place or not. By convention the cell is Ni | Ni2+ || Cu2+ | Cu. The oxidation potentials are E°Ni, Ni2+ = +0.25 V and E°Cu, Cu2+ = −0.34 V. Hence the reduction potentials are E°Ni2+, Ni = −0.25 V and E°Cu2+, Cu = +0.34 V. Now E°cell = E°right − E°left = +0.34 − (−0.25) = +0.59 V. Thus EMF comes out to be positive. This implies that CuSO4 reacts with nickel. Hence CuSO4 solution cannot be stored in a nickel vessel.

Teacher's Note: A vessel metal with lower E° than the stored ion is attacked and displaces the ion.

Exam Note: Positive E°cell means vessel reacts; answer "cannot be stored".

Question Spontaneity Problems for Practice 1(i). Predict reaction of 1 N sulphuric acid with copper. Given E°Cu2+, Cu = 0.34 volt; E°Pb2+, Pb = −0.13 V; and E°Fe2+, Fe = −0.44 V.

Solution. No (reaction does not take place).

Teacher's Note: Metals with positive E° cannot liberate H2 from dilute acids.

Exam Note: Compare with 0.00 V of hydrogen.

Question Spontaneity Problems for Practice 1(ii). Predict reaction of 1 N sulphuric acid with lead. Given E°Pb2+, Pb = −0.13 V.

Solution. Yes (reaction takes place).

Teacher's Note: Lead has negative E° so it lies below hydrogen and can reduce H+.

Exam Note: State the E° sign, then yes or no.

Question Spontaneity Problems for Practice 1(iii). Predict reaction of 1 N sulphuric acid with iron. Given E°Fe2+, Fe = −0.44 V.

Solution. Yes (reaction takes place).

Teacher's Note: Iron at −0.44 V is well below hydrogen, so it liberates H2.

Exam Note: Link negative E° to hydrogen evolution.

Question Spontaneity Problems for Practice 2. Can a solution of 1 M ZnSO4 be stored in a vessel made of copper? Given that E°Zn, Zn2+ = +0.76 volt, E°Cu, Cu2+ = 0.34 volt.

Solution. Yes.

Teacher's Note: Copper cannot reduce Zn2+: the supposed reaction has negative E°cell (−1.10 V).

Exam Note: Compute the supposed cell EMF to justify.

Question Spontaneity Problems for Practice 3. Is it safe to stir 1 M AgNO3 solution with a copper spoon? Given E°Ag+, Ag = 0.80 volt, E°Cu, Cu2+ = −0.34 V. Explain.

Solution. No.

Teacher's Note: Copper (E° 0.34 V) displaces silver (0.80 V) from Ag+, so the spoon dissolves.

Exam Note: Give E°cell = +0.46 V as explanation.

Question Spontaneity Problems for Practice 4. Can we use a copper vessel to store 1 M AgNO3 solution? Given that E°Cu2+/Cu = +0.34 V and E°Ag+/Ag = +0.80 V.

Solution. No.

Teacher's Note: Same displacement as in Q3: Cu reduces Ag+ to silver.

Exam Note: State that Cu is oxidised and Ag deposited.

Conceptual Questions

Question Conceptual Q. 1. What are the maximum and minimum oxidation numbers of N, S and Cl?

Solution. (i) The highest oxidation number (O.N.) of N is +5 since it has five electrons in the valence shell (2s2 2p3) and its minimum O.N. is −3 since it can accept three more electrons to acquire the nearest inert gas (Ne) configuration. (ii) Similarly, the highest O.N. of S is +6 since it has six electrons in the valence shell (3s2 3p4) and its minimum O.N. is −2 since it needs two more electrons to acquire the nearest inert gas (Ar) configuration. (iii) Likewise the maximum O.N. of Cl is +7 since it has seven electrons in the valence shell (3s2 3p5) and its minimum O.N. is −1 since it needs only one more electron to acquire the nearest inert gas (Ar) configuration.

Teacher's Note: Maximum O.N. = number of valence electrons; minimum = valence electrons minus 8.

Exam Note: Give values with the valence configuration reason.

Question Conceptual Q. 2. Nitric acid acts only as an oxidising agent while nitrous acid acts both as an oxidising agent as well as a reducing agent. Why?

Solution. (i) HNO3: Oxidation number of N in HNO3 = +5. Maximum oxidation number of N = +5; minimum oxidation number of N = −3. Since the oxidation number of N in HNO3 is maximum (+5), therefore, it can only decrease. Hence HNO3 acts only as an oxidising agent. (ii) HNO2: Oxidation number of N in HNO2 = +3. Maximum oxidation number of N = +5; minimum oxidation number of N = −3. Thus, the oxidation number of N can increase by losing electrons or can decrease by accepting electrons. Therefore, HNO2 acts both as an oxidising as well as a reducing agent.

Teacher's Note: An element in its highest oxidation state can only be reduced; in an intermediate state it can do both.

Exam Note: Quote O.N. of N in each acid.

Question Conceptual Q. 3. Can the reaction Cr2O72− + H2O ⇌ 2CrO42− + 2H+ be regarded as a redox reaction?

Solution. Oxidation number of Cr in Cr2O72− = +6. Oxidation number of Cr in CrO42− = +6. Since during this reaction, the oxidation number of Cr has neither decreased nor increased, therefore, the above reaction cannot be regarded as a redox reaction.

Teacher's Note: It is an acid-base (pH dependent) equilibrium of dichromate and chromate; no O.N. changes.

Exam Note: Show O.N. of Cr on both sides.

Question Conceptual Q. 4(a). Identify the oxidants and reductants in the reaction: CH4(g) + 4Cl2(g) → CCl4(g) + 4HCl(g). (N.C.E.R.T.)

Solution. Writing the O.N. of all the atoms: C is −4 in CH4 (H is +1), Cl is 0 in Cl2; C is +4 in CCl4 and Cl is −1 in CCl4 and HCl. O.N. of C increases from −4 in CH4 to +4 in CCl4 and that of Cl decreases from 0 in Cl2 to −1 in CCl4 or HCl, therefore, Cl2 acts as the oxidant and CH4 acts as the reductant.

Teacher's Note: The species whose element gains electrons (O.N. falls) is the oxidant.

Exam Note: Name oxidant and reductant with O.N. change.

Question Conceptual Q. 4(b). Identify the oxidants and reductants in the reaction: C2H2O4(aq) + 2H+(aq) + MnO2(s) → Mn2+(aq) + 2CO2(g) + 2H2O(l).

Solution. O.N. of C increases from +3 in C2H2O4 to +4 in CO2 and that of Mn decreases from +4 in MnO2 to +2 in Mn2+, therefore, MnO2 acts as the oxidant while C2H2O4 acts as the reductant.

Teacher's Note: Oxalic acid carbon is +3; it rises to +4 while Mn(IV) drops to Mn(II).

Exam Note: Show both O.N. changes.

Question Conceptual Q. 4(c). Identify the oxidants and reductants in the reaction: I2(aq) + 2S2O32−(aq) → 2I−(aq) + S4O62−(aq).

Solution. Here, O.N. of I decreases from 0 in I2 to −1 in I− and that of S increases from +2 in S2O32− to +2.5 in S4O62−, therefore, I2 acts as the oxidant while S2O32− acts as the reductant.

Teacher's Note: Average O.N. of S in tetrathionate is +2.5; this is the iodometric titration reaction.

Exam Note: Mention the fractional average O.N. of sulphur.

Question Conceptual Q. 4(d). Identify the oxidants and reductants in the reaction: Cl2(g) + 2Br−(aq) → 2Cl−(aq) + Br2(aq).

Solution. Here O.N. of Cl2 decreases from 0 in Cl2 to −1 in Cl− ion while that of Br increases from −1 in Br− ion to 0 in Br2, therefore, Cl2 acts as the oxidant while Br− ion acts as the reductant.

Teacher's Note: A halogen displaces a heavier halide because it is the stronger oxidant.

Exam Note: State oxidant is Cl2, reductant Br−.

Question Conceptual Q. 5. The electrode potential of four metallic elements (A, B, C and D) are +0.80, −0.76, +0.12 and +0.34 V respectively. Arrange them in order of decreasing electropositive character.

Solution. Higher the electrode potential (E°) lower is the tendency of the metal to lose electrons and hence lower is the electropositive character of the metal. Since the electrode potentials increase in the order: −0.76 (B), +0.12 (C), +0.34 (D) and +0.80 (A), therefore, electropositive character decreases in the same order: B, C, D, A.

Teacher's Note: Electropositive character rises as reduction potential becomes more negative.

Exam Note: Rank by increasing E° and state the order.

Question Conceptual Q. 6. I2 and Br2 are added to a solution containing Br− and I− ions. What reaction will occur if I2 + 2e− → 2I−; E° = +0.54 V and Br2 + 2e− → 2Br−; E° = +1.09 V?

Solution. Since E° of Br2 is higher than that of I2, therefore, Br2 has a higher tendency to accept electrons than I2. Conversely, I− ion has a higher tendency to lose electrons than Br− ion. Therefore, the following reaction will occur: 2I− → I2 + 2e−; Br2 + 2e− → 2Br−; overall 2I− + Br2 → I2 + 2Br−. In other words I− ion will be oxidised to I2 while Br2 will be reduced to Br− ions.

Teacher's Note: The couple with the higher E° (Br2/Br−) is the oxidant.

Exam Note: Write the overall ionic equation.

Question Conceptual Q. 7. Is it possible to store: (i) copper sulphate solution in a zinc vessel? (ii) copper sulphate solution in a nickel vessel? (iii) copper sulphate solution in a silver vessel? (iv) copper sulphate solution in a gold vessel? (N.C.E.R.T.)

Solution. (i) We cannot store CuSO4 solution in a zinc vessel because the following redox reaction occurs: Zn + CuSO4 → ZnSO4 + Cu, or Zn + Cu2+ → Zn2+ + Cu. By convention, the cell may be represented as Zn | Zn2+ || Cu2+ | Cu. E°cell = E°Cu2+, Cu − E°Zn2+, Zn = 0.34 − (−0.76) = +1.10 V. Since EMF comes out to be positive, CuSO4 reacts with zinc. In other words, CuSO4 solution cannot be stored in a zinc vessel. (ii) Same as solved in Example 9.23 on page 9/46: CuSO4 solution cannot be stored in a nickel vessel. (iii) We cannot store CuSO4 in a silver vessel if the redox reaction 2Ag + Cu2+ → 2Ag+ + Cu occurs. The cell is Ag | Ag+ || Cu2+ | Cu and E°cell = E°Cu2+, Cu − E°Ag+, Ag = 0.34 − 0.80 = −0.46 V (Corrected: the book prints −0.56 V; 0.34 − 0.80 = −0.46 V). Since the EMF of the cell is negative, CuSO4 does not react with silver. In other words, CuSO4 solution can be stored in a silver vessel. (iv) The reaction 2Au + 3Cu2+ → 2Au3+ + 3Cu would be represented by the cell Au | Au3+ || Cu2+ | Cu and E°cell = E°Cu2+, Cu − E°Au3+, Au = 0.34 − 1.50 = −1.16 V (Corrected: the book prints −1.26 V). Since the EMF of the reaction is negative, CuSO4 solution does not react with gold. In other words, CuSO4 solution can be stored in a gold vessel.

Teacher's Note: Storage is safe only when the vessel metal has higher E° than the solution ion (negative E°cell).

Exam Note: Answer for each metal: zinc no, nickel no, silver yes, gold yes.

Very Short Answer Questions (1 mark)

Question VSA Q. 1. Define oxidation and reduction in terms of electrons.

Solution. Oxidation involves loss and reduction involves gain of electrons.

Teacher's Note: Remember OIL RIG: Oxidation Is Loss, Reduction Is Gain of electrons.

Exam Note: One line each, with the word electrons.

Question VSA Q. 2. What is a redox reaction? Give one example.

Solution. Oxidation-reduction reactions are called redox reactions, Mg + F2 → Mg2+(F−)2.

Teacher's Note: Oxidation and reduction always occur together, so electrons lost equal electrons gained.

Exam Note: Define, then give the example with the half reactions.

Question VSA Q. 3. Define oxidising and reducing agents in terms of electrons.

Solution. Oxidising agents are electron acceptors while reducing agents are electron donors.

Teacher's Note: The oxidising agent is itself reduced; the reducing agent is itself oxidised.

Exam Note: Use the words acceptor and donor.

Question VSA Q. 4. What is a standard hydrogen electrode? (Refer to the text on page 9/38.)

Solution. Refer to the text on page 9/38: it consists of a platinised platinum electrode (platinum coated with platinum black) dipped in 1 M solution of H+ ions (1 M HCl) at 298 K, with pure hydrogen gas at 1 bar pressure bubbled over it. Its electrode potential is taken as zero. It is represented as Pt | H2(g, 1 bar), H+(aq, conc = c).

Teacher's Note: The SHE is the reference against which all other electrode potentials are measured.

Exam Note: Mention Pt black, 1 M H+, 1 bar H2, E° = 0.

Question VSA Q. 5. The standard electrode potentials of a few metals are given below: Al (−1.66 V), Cu (+0.34 V), Li (−3.05 V), Ag (+0.80 V) and Zn (−0.76 V). Which of these will behave as the strongest oxidising agent and which as the strongest reducing agent?

Solution. Li is the strongest reducing agent while Ag+ is the strongest oxidising agent.

Teacher's Note: The most negative E° metal is the best reductant; the most positive E° ion is the best oxidant.

Exam Note: Name both: Li and Ag+.

Question VSA Q. 6. In the reaction MnO2 + 4HCl → MnCl2 + Cl2 + 2H2O which species is oxidised? (B.I.T. Ranchi 1990)

Solution. HCl is oxidised to Cl2.

Teacher's Note: Chlorine rises from −1 to 0, while Mn falls from +4 to +2 in MnO2.

Exam Note: State the species and the O.N. change.

Question VSA Q. 7(i). What is the oxidation number of C in CH2O? (M.L.N.R. Allahabad 1990)

Solution. Zero.

Teacher's Note: Let C be x: x + 2(+1) + (−2) = 0 gives x = 0.

Exam Note: Show the algebraic sum for marks.

Question VSA Q. 7(ii). What is the oxidation number of Pt in [Pt(C2H4)Cl3]−? (M.L.N.R. Allahabad 1993)

Solution. +2.

Teacher's Note: Ethene is neutral; x + 0 + 3(−1) = −1 gives x = +2.

Exam Note: Treat the neutral ligand as zero.

Question VSA Q. 8. What is the oxidation state of Ni in Ni(CO)4? (A.I.S.B. 1995)

Solution. Zero.

Teacher's Note: CO is a neutral ligand and the complex is neutral, so Ni is 0.

Exam Note: Mention CO is neutral.

Question VSA Q. 9. Why is it not possible to measure the voltage of an isolated reduction half reaction? (H.S.B. 1995)

Solution. Consult Sec. 9.14.3 on page 9/38: a half cell reaction cannot take place independently; it is a relative tendency to lose or gain electrons, and as soon as another metal conductor is put into the solution it will set up its own potential. Therefore the electrode potential is measured against a reference electrode, the standard hydrogen electrode.

Teacher's Note: A single electrode potential needs a second electrode to complete the circuit.

Exam Note: Say potential is relative; use a reference electrode.

Question VSA Q. 10. What is a redox couple? (N.C.E.R.T.)

Solution. A redox couple consists of oxidised and reduced form of the same substance taking part in an oxidation or reduction half reaction. For example, Zn2+(aq)/Zn, Cl2(g)/Cl−(aq) etc.

Teacher's Note: The couple is written oxidised form/reduced form, e.g. Cu2+/Cu.

Exam Note: Define and give an example.

Question VSA Q. 11(i). On the basis of stoichiometry, determine the oxidation number of Fe in Fe3O4 and Fe4[Fe(CN)6]3. (N.C.E.R.T.)

Solution. The composition of Fe3O4 is FeO·Fe2O3. The O.N. of Fe in FeO is +2 while in Fe2O3 it is +3. In Fe4[Fe(CN)6]3, the O.N. of Fe inside the coordination sphere is +2 while that of Fe outside the coordination sphere is +3.

Teacher's Note: Fe3O4 is a mixed oxide, average +8/3; Fe(II) and Fe(III) coexist.

Exam Note: Give both oxidation states and where each Fe sits.

Question VSA Q. 11(ii). On the basis of stoichiometry, determine the oxidation number of Cl in CaOCl2.

Solution. The composition of CaOCl2 is Ca(OCl)Cl. Hence, O.N. of Cl in OCl− is +1 while in Cl− ion, it is −1.

Teacher's Note: Bleaching powder has two different chlorines, so one single O.N. is wrong.

Exam Note: Split into OCl− and Cl−.

Short Answer Questions (2 or 3 marks)

Question SAQ 8. Write the following redox reactions using half equations: (i) Zn(s) + PbCl2(aq) → Pb(s) + ZnCl2(aq); (ii) 2Fe3+(aq) + 2I−(aq) → I2(s) + 2Fe2+(aq); (iii) 2Na(s) + Cl2(g) → 2NaCl(s); (iv) Mg(s) + Cl2(g) → MgCl2(s); (v) Zn(s) + 2H+(aq) → Zn2+(aq) + H2(g). In each of the reactions given above, mention (i) which reactant is oxidised? To what? (ii) which reactant is the oxidiser? (iii) which reactant is reduced? To what? (iv) which reactant is the reducer?

Solution. (i) Zn(s) → Zn2+ + 2e− (oxidation), Pb2+(aq) + 2e− → Pb(s) (reduction). Zn is oxidised to Zn2+, Pb2+ is reduced to Pb; Pb2+ is the oxidiser and Zn is the reducer. (ii) 2Fe3+ + 2e− → 2Fe2+ (reduction), 2I− → I2 + 2e− (oxidation). Fe3+ is reduced to Fe2+, I− is oxidised to I2; I− is the reducer and Fe3+ is the oxidiser. (iii) 2Na → 2Na+ + 2e− (oxidation), Cl2 + 2e− → 2Cl− (reduction). Na is oxidised to Na+ and Cl2 is reduced to Cl−; Na is the reducer and Cl2 is the oxidiser. (iv) Mg → Mg2+ + 2e− (oxidation), Cl2 + 2e− → 2Cl− (reduction). Mg is oxidised to Mg2+ while Cl2 is reduced to Cl−; Mg is the reducer and Cl2 is the oxidiser. (v) Zn → Zn2+ + 2e− (oxidation), 2H+ + 2e− → H2 (reduction). Zn is oxidised to Zn2+ while H+ is reduced to H2; Zn is the reducer and H+ is the oxidiser.

Teacher's Note: Split each reaction into an electron-losing and an electron-gaining half; the oxidised species is the reducer.

Exam Note: Write both half equations, then name oxidiser and reducer.

Question SAQ 15(i). Starting with the correctly balanced half reactions, write the overall net ionic reaction: chloride ion is oxidised to Cl2 by MnO4− (in acid solution). Also find out the change in the oxidation number of the underlined atom (Mn).

Solution. 2MnO4− + 16H+ + 10Cl− → 5Cl2 + 2Mn2+ + 8H2O. Oxidation number of Mn changes from +7 in MnO4− to +2 in Mn2+.

Teacher's Note: Multiply the 5e− permanganate half by 2 and the 2e− chloride half by 5.

Exam Note: Balance atoms, charge and electrons (10 e−).

Question SAQ 15(ii). Starting with the correctly balanced half reactions, write the overall net ionic reaction: nitrous acid (HNO2) reduces MnO4− (in acid solution). Find the change in oxidation number of N.

Solution. 2MnO4− + 6H+ + 5NO2− → 5NO3− + 3H2O + 2Mn2+. Oxidation number of N changes from +3 in NO2− ion to +5 in NO3− ion.

Teacher's Note: Nitrite loses 2e− each, permanganate gains 5e−: ratio 5 : 2.

Exam Note: Show the 10-electron balance.

Question SAQ 15(iii). Starting with the correctly balanced half reactions, write the overall net ionic reaction: nitrous acid (HNO2) oxidises I− to I2 (in acid solution). Find the change in oxidation number of N.

Solution. 2I− + 4H+ + 2NO2− → I2 + 2NO + 2H2O. Oxidation number of N changes from +3 in NO2− to +2 in NO.

Teacher's Note: Here nitrite is the oxidant (+3 to +2), unlike its role in part (ii).

Exam Note: Equal 2e− on each side; check charge.

Question SAQ 15(iv). Starting with the correctly balanced half reactions, write the overall net ionic reaction: chlorate ion (ClO3−) oxidises Mn2+ to MnO2(s) (in acid solution). Find the change in oxidation number of Cl.

Solution. Corrected: 3Mn2+ + ClO3− + 3H2O → 3MnO2 + Cl− + 6H+ (the book prints 3Mn2+ + ClO3− + 6H+ → 3Mn4+ + Cl− + 3H2O, which does not give MnO2). Oxidation number of Cl changes from +5 in ClO3− to −1 in Cl−.

Teacher's Note: Mn goes +2 to +4 (6e− for 3 Mn); Cl goes +5 to −1 (6e−).

Exam Note: Product must be solid MnO2, not Mn4+.

Question SAQ 15(v). Starting with the correctly balanced half reactions, write the overall net ionic reaction: chromite ion (CrO2−; printed as CrO3− in the book) is oxidised by H2O2 (in strongly basic medium). Find the change in oxidation number of Cr.

Solution. Corrected: 2CrO2− + 3H2O2 + 2OH− → 2CrO42− + 4H2O. Oxidation number of Cr changes from +3 in CrO2− to +6 in CrO42−. (The book prints 2CrO3− + H2O2 + 2OH− → 2CrO42− + 2H2O with Cr changing from +5 to +6, which is not balanced in oxygen.)

Teacher's Note: Chromite CrO2− has Cr(+3); each Cr gives 3e−, each H2O2 takes 2e−.

Exam Note: Balance O and H in basic medium using OH−.

C.B.S.E.-P.M.T. (Mains) Special: A. Subjective Questions (Common with I.I.T.)

Question PMT Q. 1. Copper dissolves in dilute nitric acid but not in dilute HCl. Explain.

Solution. Since E° of Cu2+/Cu electrode (+0.34 V) is higher than that of H+/H2 electrode (0.0 V), therefore, H+ ions cannot oxidise Cu to Cu2+ ions and hence Cu does not dissolve in dil. HCl. In contrast, the electrode potential of NO3− ion, i.e., NO3−/NO, i.e., (+0.97 V) is higher than that of copper electrode and hence it can oxidise Cu to Cu2+ ions and thus Cu dissolves in dil. HNO3. Thus, Cu dissolves in dil. HNO3 due to oxidation of Cu by NO3− ions and not by H+ ions.

Teacher's Note: The oxidising agent in HNO3 is the nitrate ion, not H+.

Exam Note: Compare E° of H+/H2 and NO3−/NO with Cu.

Question PMT Q. 2. Arrange A, B, C, D, E and H in order of increasing electrode potential in the electrochemical series if: A + H2SO4 → ASO4 + H2; ACl2 + C → CCl2 + A; ECl2 + C → no reaction; 2BCl + D → DCl2 + 2B; H2SO4 + D → no reaction.

Solution. (i) Since A reacts with H2SO4 to liberate H2 but D does not, therefore, A lies above and D lies below H in the electrochemical series. (ii) Further since D displaces B from BCl, therefore, E° of D is lower than that of B, i.e., D lies above B in the electrochemical series. (iii) Since C displaces A from ACl2 but not E from ECl2, therefore, E° of C is lower than that of A and that of E is lower than that of C. From (i), (ii) and (iii), it is evident that the overall order of increasing electrode potentials of these five elements is: E, C, A, H, D, B.

Teacher's Note: A metal displaces another from its salt only if its E° is lower; chain the clues.

Exam Note: Give final order E, C, A, H, D, B with reasons.

Question PMT Q. 3. What is the difference in the definition of an equivalent in an acid-base reaction and an equivalent in an oxidation-reduction reaction? (B.I.T. Ranchi 1990)

Solution. Equivalent weight in acid-base reaction is the weight in grams which supplies or accepts one mole of H+ ions. Equivalent weight in oxidation-reduction reaction is the weight of the substance which gains or loses one mole of electrons.

Teacher's Note: Same substance can have different equivalent weights in acid-base and redox reactions.

Exam Note: Define both clearly, one line each.

Question PMT Q. 4. Find out the ratio of equivalent weight of H2C2O4·2H2O as an acid and its equivalent weight as a reductant. (West Bengal J.E.E. 2004)

Solution. (i) Mol. wt. of H2C2O4·2H2O (oxalic acid) = 126. Eq. wt. of acid = Mol. wt. of acid/Basicity = 126/2 = 63. (ii) Oxidation of oxalic acid involves 2e− change, i.e., C2O42− → 2CO2 + 2e−. Thus, Eq. wt. of H2C2O4·2H2O = Mol. wt./No. of electrons lost = 126/2 = 63.0. Ratio of Eq. wt. of oxalic acid as an acid to its Eq. wt. as a reductant is 63/63 = 1.

Teacher's Note: Oxalic acid has basicity 2 and also loses 2 electrons, so both equivalent weights equal M/2.

Exam Note: Compute each equivalent weight, then the ratio 1.

Question PMT Q. 5. How does Cu2O act as both oxidant and reductant? Explain with proper reactions showing the change in oxidation numbers in each case. (West Bengal J.E.E. 2004)

Solution. Cu2O undergoes disproportionation to form Cu2+ and Cu: 2Cu+(aq) ⇌ Cu2+(aq) + Cu(s). Thus Cu+ or Cu2O acts both as an oxidant as well as a reductant. (i) When heated in air, Cu2O is oxidised to CuO: Cu2O + ½O2 → 2CuO (Cu: +1 → +2) and Cu2O acts as a reductant and reduces O2 to O2−. (ii) When heated with Cu2S, it oxidises S2− to SO2 and hence Cu2O acts as an oxidant: 2Cu2O + Cu2S → 6Cu + SO2 (Cu: +1 → 0; S: −2 → +4).

Teacher's Note: Cu(I) is intermediate between Cu(0) and Cu(II), so it can both gain and lose electrons.

Exam Note: Give one reaction for each role with O.N. changes.

Question PMT Q. 6. Balance the following equations by oxidation number method: (i) S + HNO3 → SO2 + NO2 + H2O; (ii) P4 + NaOH + H2O → PH3 + NaH2PO2. (West Bengal J.E.E. 2004)

Solution. (i) S + 4HNO3 → SO2 + 4NO2 + 2H2O. (ii) P4 + 3NaOH + 3H2O → PH3 + 3NaH2PO2.

Teacher's Note: (i) S rises by 4, N falls by 1; (ii) P4 disproportionates to P3− and P+.

Exam Note: Show total increase equals total decrease in O.N.

B. Problems

Question Problem 1. 6.70 g of an alkali metal oxalate was dissolved per litre of the solution. 10 cm3 of this solution required 20 cm3 of 0.01 M potassium permanganate solution in acidic medium. What is the atomic weight of the alkali metal?

Solution. The balanced chemical equation for the redox reaction is 2KMnO4 + 5(COOM)2 + 8H2SO4 → K2SO4 + 2MnSO4 + 5M2SO4 + 10CO2 + 8H2O, where M is the alkali metal. Let M1 be the molarity of the alkali metal oxalate solution. Applying molarity equation, M1 × 10/5 = 20 × 0.01/2 or M1 = 0.05 M. Let A be the atomic weight of the alkali metal. Mol. wt. of (COOM)2 = 2A + 88. Thus, amount of metal oxalate present per litre of the solution = (2A + 88) × 0.05 g. But the amount of alkali metal oxalate solution = 6.7 g L−1 (given). Therefore (2A + 88) × 0.05 = 6.7 or A = 23.

Teacher's Note: Oxalate:permanganate is 5:2, so use M1V1/5 = M2V2/2; A = 23 is sodium.

Exam Note: Write balanced equation, mole ratio, then solve for A.

Question Problem 2. 1.5 g of pyrolusite ore were treated with 10 g of Mohr's salt and dilute H2SO4. After the reaction, the solution was diluted to 250 cm3. 50 cm3 of diluted solution required 10 cm3 of 0.1 N K2Cr2O7 solution. Find out percentage of pure MnO2 in pyrolusite.

Solution. Pure MnO2 present in pyrolusite oxidises Fe2+ of Mohr's salt ((NH4)2SO4·FeSO4·6H2O) to Fe3+. Unreacted Fe2+ of Mohr's salt is determined by K2Cr2O7. Chemical equations: MnO2 + 2Fe2+ + 4H+ → Mn2+ + 2Fe3+ + 2H2O; Cr2O72− + 6Fe2+ + 14H+ → 2Cr3+ + 6Fe3+ + 7H2O. Step 1. To determine unreacted Mohr's salt: 50 cm3 of diluted Mohr's salt = 10 cm3 of 0.1 N K2Cr2O7; normality of diluted solution = 0.02 N. Mol. wt. of Mohr's salt = 392. Amount of unreacted Mohr's salt present in 250 cm3 solution = 0.02 × 392/4 = 1.96 g. Amount of Mohr's salt used = 10 − 1.96 = 8.04 g. From balanced equation, 2 moles of Mohr's salt (i.e. 2 × 392 g) react with one mole of MnO2 = 87 g. So 8.04 g of Mohr's salt will react with MnO2 = 87/(2 × 392) × 8.04 g = 0.892 g. Now 0.892 g of pure MnO2 are present in 1.5 g of pyrolusite; % age of MnO2 in pyrolusite = (0.0892/1.5) × 100 = 59.48%.

Teacher's Note: This is a back titration: Mohr's salt in excess, leftover found with dichromate.

Exam Note: Find unreacted Fe2+, then moles used by MnO2.

Question Problem 3. 25 cm3 of a solution containing ferrous sulphate and ferric sulphate acidified with H2SO4 is reduced by metallic zinc. The solution required 34.25 cm3 of 0.1 N K2Cr2O7 solution for oxidation. However, before reduction with zinc, 25 cm3 of the same solution required 22.45 cm3 of the same K2Cr2O7 solution. Calculate the amount of ferrous sulphate and ferric sulphate present per litre of the solution.

Solution. Titration before reduction gives only FeSO4. After reduction, Fe2(SO4)3 is also reduced to FeSO4 and titration gives total concentration of FeSO4 and Fe2(SO4)3. Milliequivalents of K2Cr2O7 used after reduction = 34.25 × 0.1 = 3.425. Milliequivalents of K2Cr2O7 used before reduction = 22.45 × 0.1 = 2.245. So milliequivalents of FeSO4 in 25 cm3 = 2.245 and milliequivalents of Fe2(SO4)3 in 25 cm3 = 3.425 − 2.245 = 1.180. Eq. wt. of FeSO4 = 152/1 = 152. Eq. wt. of Fe2(SO4)3 = 400/2 = 200. Hence FeSO4 (g L−1) = (2.245/1000) × 152 × (1000/25) = 13.65; Fe2(SO4)3 (g L−1) = (1.180/1000) × 200 × (1000/25) = 9.44.

Teacher's Note: The difference between the two titres is due to Fe(III) reduced by zinc.

Exam Note: Subtract milliequivalents before and after reduction.

Question Problem 4. 12.53 cm3 of 0.051 M SeO2 reacts exactly with 25.5 cm3 of 0.1 M CrSO4 which is oxidised to Cr2(SO4)3. To what oxidation state is the selenium converted during the reaction?

Solution. Let O.N. of Se in the new compound = x. SeO2 + (4 − x)Cr2+ → Sex+ + Cr3+ (Se is reduced from +4 to x; Cr is oxidised from +2 to +3). Now 12.53 cm3 of 0.051 M SeO2 = 12.53 × 0.051 = 0.64 millimoles of SeO2 and 25.5 cm3 of 0.1 M CrSO4 = 25.5 × 0.1 = 2.55 millimoles of CrSO4. But according to balanced equation, (4 − x) moles of CrSO4 reduce 1 mole of SeO2. Thus 2.55 millimoles of CrSO4 will reduce 2.55/(4 − x) millimoles of SeO2. But SeO2 actually reduced = 0.64 millimoles. Equating the two values, 2.55/(4 − x) = 0.64 giving 4 − x ≈ 4, i.e., x = 0. The oxidation state of selenium in the product is 0 (elemental Se).

Teacher's Note: Electrons lost by Cr2+ equal electrons gained by SeO2; 2.55/0.64 ≈ 4 electrons per Se.

Exam Note: Use mmol ratio to get electrons per Se, then final O.N.

Question Problem 5. 1.1 g of a sample of copper ore is dissolved and Cu2+(aq) is treated with KI. The iodine thus liberated required 12.12 cm3 of 0.1 M Na2S2O3 solution for titration. What is the percentage of copper in the ore?

Solution. The complete balanced equation for the redox reactions is 2Cu2+ + 4I− + 2S2O32− → Cu2I2 + S4O62− + 2I−. No. of moles of S2O32− used = (12.12/1000) × 0.1 = 1.212 × 10−3 moles. From the balanced equation, 2 moles of S2O32− reduce 2 moles of Cu2+; therefore 1.212 × 10−3 moles of S2O32− will reduce 1.212 × 10−3 moles of Cu2+. Wt. of pure Cu present in the ore = 1.212 × 10−3 × 63.5 = 0.077 g. Thus, % age of Cu in the ore = (0.077/1.1) × 100 = 7%.

Teacher's Note: Cu2+ and thiosulphate react in 1:1 mole ratio through liberated iodine.

Exam Note: Link Cu2+ to thiosulphate moles, then % of 1.1 g.

I.I.T. (Mains) Special

Question Q. 1 (IIT). 5.0 g of a sample of brass was dissolved in 1 litre dil. H2SO4. 20 cm3 of this solution was mixed with KI and liberated iodine required 20 cm3 of 0.0327 M hypo solution for titration. Calculate the percentage of copper in the alloy.

Solution. Brass is an alloy of Cu and Zn. When brass is treated with dil. H2SO4 in presence of air, CuSO4 and ZnSO4 are obtained: 2Cu + 2H2SO4 + O2 → 2CuSO4 + 2H2O; Zn + H2SO4 → ZnSO4 + H2. Out of CuSO4 and ZnSO4, only CuSO4 reacts with KI to form I2, which can be titrated against hypo solution: 2CuSO4 + 4KI → 2K2SO4 + 2CuI2; 2CuI2 → Cu2I2 + I2; I2 + 2Na2S2O3 → Na2S4O6 + 2NaI. Overall: 2CuSO4 + 4KI + 2Na2S2O3 → Cu2I2 + K2SO4 + Na2S4O6 + 2NaI. Step 1. Molarity of CuSO4 solution: let it be M1. Applying molarity equation, M1V1/2 (CuSO4) = M2V2/2 (Na2S2O3), or M1 × 20 = 0.0327 × 20, or M1 = 0.0327 M. Step 2. Percentage of copper in the alloy: volume of alloy solution = 1000 cm3; molarity of alloy solution w.r.t. Cu2+ = 0.0327 M. At. wt. of Cu = 63.5. Amount of Cu2+ formed = 0.0327 × 63.5 = 2.076 g. Amount of copper in the alloy = 2.076 g; amount of alloy taken = 5.0 g. Therefore % of copper in the alloy = (2.076/5) × 100 = 41.52%.

Teacher's Note: Zn does not liberate iodine from KI; only Cu2+ does, 1:1 with thiosulphate.

Exam Note: Equate moles Cu2+ and thiosulphate, scale to 1 litre.

Question Q. 2 (IIT). In an ore, the only oxidisable material is Sn2+. This ore is titrated with a dichromate solution containing 2.5 g of K2Cr2O7 in 0.50 litre. The 0.40 g sample of the ore required 10.0 cm3 of titrant to reach equivalent point. Calculate the percentage of tin in the ore. (K = 39.1, Cr = 52, Sn = 118.7) (Roorkee 1993)

Solution. Wt. of K2Cr2O7 present in 500 cm3 = 2.5 g. Wt. of K2Cr2O7 present in 10 cm3 = (2.5/500) × 10 g = 0.05 g. Mol. wt. of K2Cr2O7 = 294. No. of moles of K2Cr2O7 present in 10 cm3 solution = 2.5 × 10/(500 × 294) = 0.00017. The balanced chemical equation for the redox reaction is Cr2O72− + 14H+ + 3Sn2+ → 2Cr3+ + 3Sn4+ + 7H2O. From the balanced equation, 1 mole K2Cr2O7 oxidises Sn2+ = 3 moles. So 0.00017 mole K2Cr2O7 will oxidise Sn2+ = 3 × 0.00017 = 0.00051 mole. Amount of Sn2+ oxidised = 118.7 × 0.00051 = 0.06 g. Therefore % age of Sn in the ore = (0.06/0.40) × 100 = 15.

Teacher's Note: Dichromate takes 6 electrons and Sn2+ gives 2, so the mole ratio is 1 : 3.

Exam Note: Moles dichromate × 3 gives moles of tin.

Question Q. 3 (IIT). A sample of hydrazine sulphate (N2H6SO4) was dissolved in 250 ml of water. 10 ml of this solution was reacted with excess of ferric chloride solution and warmed to complete the reaction. Ferrous ion formed was estimated and it required 10 ml of M/25 potassium permanganate solution. Estimate the amount of hydrazine sulphate dissolved in 250 ml of the solution. 4Fe3+ + N2H4 → N2 + 4Fe2+ + 4H+; MnO4− + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O (M.L.N.R. Allahabad 1993)

Solution. Step 1. Moles of KMnO4 used: 10 ml of N2H6SO4 solution = 10 ml of M/25 KMnO4. So 250 ml of N2H6SO4 solution = 250 ml of M/25 KMnO4 = (1/25) × (1/1000) × 250 moles of KMnO4 = 0.01 mole of KMnO4. Step 2. Amount of N2H6SO4: Multiplying the first equation by 5 and the second by 4 to cancel Fe2+ and then adding, 4MnO4− + 5N2H4 + 12H+ → products. Thus 4 moles of KMnO4 react with 5 moles of N2H6SO4. So 0.01 mole KMnO4 will react with N2H6SO4 = (5/4) × 0.01 mole = 0.0125 mole. Amount = 0.0125 × 130 g (mol. wt. of N2H6SO4 = 130) = 1.625 g.

Teacher's Note: Ferrous ion is the intermediate; combine the two equations to get 4 MnO4− : 5 hydrazine.

Exam Note: Eliminate Fe2+, then scale from 10 ml to 250 ml.

Question Q. 4 (IIT). 0.5 g sample containing MnO2 is treated with HCl liberating Cl2. The chlorine is passed into a solution of KI and 30.0 cm3 of 0.1 M Na2S2O3 are required to titrate the liberated iodine. Calculate the percentage of MnO2 in the sample. (At. wt. of Mn = 55) (Roorkee 1994)

Solution. Step 1. Complete equation: MnO2 + 4HCl → MnCl2 + Cl2 + 2H2O; 2KI + Cl2 → 2KCl + I2; I2 + 2Na2S2O3 → Na2S4O6 + 2NaI. Overall: MnO2 + 4HCl + 2KI + 2Na2S2O3 → MnCl2 + 2KCl + Na2S4O6 + 2NaI + 2H2O. Step 2. No. of moles of Na2S2O3 in 30 cm3 of 0.1 M = (30/1000) × 0.1 = 0.003 mole. From the balanced equation, 2 moles of Na2S2O3 = 1 mole of MnO2. So 0.003 mole of Na2S2O3 = (1/2) × 0.003 = 0.0015 mole MnO2. Mol. wt. of MnO2 = 55 + 2 × 16 = 87. Wt. of MnO2 reacted = 0.0015 × 87 = 0.1305 g. % age of MnO2 in the sample = (0.1305/0.5) × 100 = 26.1%.

Teacher's Note: One MnO2 gives one Cl2, then one I2, which uses two thiosulphate.

Exam Note: Chain MnO2 → Cl2 → I2 → thiosulphate.

Question Q. 5 (IIT). 0.5 g mixture of K2Cr2O7 and KMnO4 was treated with excess KI in acidic medium. Iodine liberated required 100 cm3 of 0.15 N sodium thiosulphate solution for titration. Find the percent amount of each in the mixture. (At. wts. K = 39, Cr = 52, Mn = 55, Na = 23, S = 32) (Roorkee 1995)

Solution. The reactions involved are: K2Cr2O7 + 7H2SO4 + 6KI → 4K2SO4 + Cr2(SO4)3 + 7H2O + 3I2 ...(i) (294 g gives 3 × 254 = 762 g I2); 2KMnO4 + 3H2SO4 + 10KI → K2SO4 + 2MnSO4 + 8H2O + 5I2 ...(ii) (2 × 158 = 316 g gives 5 × 254 = 1270 g I2); I2 + 2Na2S2O3 → Na2S4O6 + 2NaI. Suppose weight of K2Cr2O7 in the mixture = x g. Then weight of KMnO4 in the mixture = (0.5 − x) g. Iodine produced from x g K2Cr2O7 = (762/294) × x g. Iodine produced from (0.5 − x) g KMnO4 = (1270/316) × (0.5 − x) g. Total iodine produced = (762x/294) + 1270(0.5 − x)/316 g. 100 cc of 0.15 N Na2S2O3 = 100 cc of 0.15 N I2 solution = (127 × 0.15/1000) × 100 g = 1.905 g. Hence 762x/294 + 1270(0.5 − x)/316 = 1.905, which on solving gives x = 0.073 g. Therefore % age of K2Cr2O7 in the mixture = (0.073/0.5) × 100 = 14.6% and % age of KMnO4 in the mixture = 100 − 14.6 = 85.4%.]

Teacher's Note: Each oxidant liberates a different amount of iodine, so use two unknowns tied by total mass 0.5 g.

Exam Note: Set total I2 equation with x and 0.5 − x.

Question Q. 7 (IIT). One litre of a mixture of O2 and O3 at NTP was allowed to react with an excess of acidified solution of KI. The iodine liberated required 40 ml of M/10 sodium thiosulphate solution for titration. What is the weight percent of ozone in the mixture? Ultraviolet radiations of wavelength 300 nm can decompose ozone. Assuming that one photon can decompose one ozone molecule, how many photons would be required for the complete decomposition of ozone in the original mixture? (I.I.T. 1997)

Solution. O3 → O2 + O; 2KI + H2SO4 + (O) → K2SO4 + H2O + I2; 2Na2S2O3 + I2 → Na2S4O6 + 2NaI. Overall: 2Na2S2O3 + 2KI + O3 + H2SO4 → O2 + K2SO4 + H2O + Na2S4O6 + 2NaI. 2 moles of Na2S2O3 react with one mole of O3. No. of moles of Na2S2O3 in 40 ml of (M/10) Na2S2O3 = (1/10) × (1/1000) × 40 = 4 × 10−3 mole. Therefore O3 reacted (present) = 2 × 10−3 mole (since 2 moles Na2S2O3 = 1 mole O3). Volume of O3 = 2 × 10−3 × 22.4 L = 0.0448 L. Volume of O2 = 1 − 0.0448 = 0.9552 L. Weight of O3 = 2 × 10−3 × 48 = 0.096 g. Weight of O2 = (0.9552/22.4) × 32 = 1.3646 g. Weight of mixture = 0.096 + 1.3646 = 1.4606 g. Therefore % of O3 by weight = (0.096/1.4606) × 100 = 6.573%. No. of molecules in 2 × 10−3 mole of O3 = 2 × 10−3 × 6.022 × 1023 = 1.2044 × 1021. Therefore the number of photons required = 1.2044 × 1021.

Teacher's Note: Ozone liberates iodine, 1 O3 : 1 I2 : 2 thiosulphate; one photon per molecule gives Avogadro scaling.

Exam Note: Give % by weight and photon count as NA × moles.

Question Q. 8 (IIT). An aqueous solution of 0.10 g KIO3 (formula weight = 214.0) was treated with an excess of KI solution. The solution was acidified with HCl. The liberated I2 consumed 45.0 ml of thiosulphate solution to decolourise the blue starch-iodine complex. Calculate the molarity of the sodium thiosulphate solution. (I.I.T. 1998)

Solution. The reactions involved are: 2IO3− + 12H+ + 10e− → 6H2O + I2 (as printed, per half-reaction); 10I− → 5I2 + 10e−; 2IO3− + 12H+ + 10I− → 6I2 + 6H2O; (2S2O32− + I2 → S4O62− + 2I−) × 6; overall 2IO3− + 12H+ + 12S2O32− → 6S4O62− + 2I− + 6H2O. No. of moles of KIO3 = 0.1/214. No. of moles of Na2S2O3 reacted = (0.1/214) × 6. These are present in 45.0 ml. Hence molarity of Na2S2O3 solution = (0.1 × 6/214) × (1000/45) = 0.0623 M.

Teacher's Note: One iodate gives 3 I2 and each I2 needs 2 thiosulphate, so 6 per iodate.

Exam Note: Convert grams to moles, apply factor 6, divide by litres.

Multiple Choice Questions (CBSE-PMT, IIT Screening, AIEEE, AIIMS and other competitive examinations)

Question MCQ 1. Oxidation number of sodium in sodium amalgam is (a) +1 (b) 0 (c) −1 (d) +2

Solution. Correct option: (b) 0.

Teacher's Note: Amalgam is an alloy of Na with Hg, so Na stays in its elemental state.

Exam Note: Metallic solution means oxidation number zero.

Question MCQ 2. For the reaction, Mx+ + MnO4− → MO3− + Mn2+ + ½O2, if one mole of MnO4− oxidises 1.67 moles of Mx+ to MO3−, then the value of x in the reaction is (a) 5 (b) 3 (c) 2 (d) 1

Solution. Correct option: (c) 2.

Teacher's Note: Electrons: 1.67(5 − x) = 5 gives 5 − x = 3, so x = 2.

Exam Note: Equate electrons lost by M to 5 gained per Mn.

Question MCQ 3. The oxidation number of phosphorus in Ba(H2PO2)2 is (a) +3 (b) +2 (c) +1 (d) −1 (I.I.T. 1990)

Solution. Correct option: (c) +1.

Teacher's Note: Per H2PO2−: 2(+1) + x + 2(−2) = −1 gives x = +1.

Exam Note: Find the ion charge from Ba2+ first.

Question MCQ 4. For the redox reaction MnO4− + C2O42− + H+ → Mn2+ + CO2 + H2O, the correct coefficients of the reactants (MnO4−, C2O42−, H+) for the balanced reaction are: (a) 2, 5, 16 (b) 16, 5, 2 (c) 5, 16, 2 (d) 2, 16, 5 (I.I.T. 1992)

Solution. Correct option: (a) 2, 5, 16.

Teacher's Note: Balanced: 2MnO4− + 5C2O42− + 16H+ → 2Mn2+ + 10CO2 + 8H2O.

Exam Note: Electron ratio 5 : 2 fixes permanganate and oxalate.

Question MCQ 5. If a half cell reaction A + e− → A− has a large negative reduction potential, it follows that (a) A is easily reduced (b) A is easily oxidised (c) A− is readily reduced (d) A− is readily oxidised (M.L.N.R. Allahabad 1992)

Solution. Correct option: (d) A− is readily oxidised.

Teacher's Note: Large negative E° means A is hard to reduce, so A− readily gives its electron back.

Exam Note: Negative E° favours the reverse (oxidation) direction.

Question MCQ 6. The oxidation state of chromium in Cr(CO)6 is (a) 0 (b) +2 (c) −2 (d) +6 (A.I.I.M.S. 1993)

Solution. Correct option: (a) 0.

Teacher's Note: CO is a neutral ligand, so Cr in a neutral carbonyl is zero.

Exam Note: Neutral ligands contribute nothing to oxidation number.

Question MCQ 7. Which of the following is not a redox reaction? (a) CaCO3 → CaO + CO2 (b) O2 + 2H2 → 2H2O (c) Na + H2O → NaOH + ½H2 (d) MnCl3 → MnCl2 + ½Cl2 (A.I.I.M.S. 1993)

Solution. Correct option: (a) CaCO3 → CaO + CO2.

Teacher's Note: Thermal decomposition of CaCO3 has no change in any oxidation number.

Exam Note: Check for O.N. change in every element.

Question MCQ 8. A mole of N2H4 loses ten moles of electrons to form a new compound Y. Assuming that all the nitrogen appears in the new compound, what is the oxidation state of nitrogen in Y? (there is no change in oxidation number of hydrogen) (a) −1 (b) −3 (c) +3 (d) +5 (B.H.U. 1994)

Solution. Correct option: (c) +3.

Teacher's Note: N is −2 in N2H4; each of 2 N loses 5 e−, giving +3.

Exam Note: Divide 10 electrons by 2 nitrogen atoms.

Question MCQ 9. When copper is treated with a certain concentration of nitric acid, nitric oxide and nitrogen dioxide are liberated in equal volumes according to the equation, xCu + yHNO3 → Cu(NO3)2 + NO + NO2 + H2O. The coefficients of x and y are (a) 2 and 3 (b) 2 and 6 (c) 1 and 3 (d) 3 and 8 (C.B.S.E. P.M.T. 1994)

Solution. Correct option: (b) 2 and 6.

Teacher's Note: Balanced: 2Cu + 6HNO3 → 2Cu(NO3)2 + NO + NO2 + 3H2O; electrons 4 = 3 + 1.

Exam Note: Equal gases: 3 + 1 = 4 electrons per 2 Cu.

Question MCQ 10. In which of the following pairs, there is greatest difference in the oxidation number of the underlined elements? (a) N in NO2 and N2O4; (b) P in P2O5 and P4O10; (c) N in N2O and NO; (d) S in SO2 and SO3. (a) NO2 and N2O4 (b) P2O5 and P4O10 (c) N2O and NO (d) SO2 and SO3 (D.C.E. 1994)

Solution. Correct option: (d) SO2 and SO3.

Teacher's Note: Differences are 0, 0, 1 (+1 vs +2) and 2 (+4 vs +6).

Exam Note: Write O.N. for each pair and subtract.

Question MCQ 11. In the reaction, 2FeCl3 + H2S → 2FeCl2 + 2HCl + S (a) FeCl3 acts as an oxidising agent (b) Both H2S and FeCl3 are oxidised (c) FeCl3 is oxidised while H2S is reduced (d) H2S acts as an oxidising agent (U.P.S.E.A.T. 1996)

Solution. Correct option: (a) FeCl3 acts as an oxidising agent.

Teacher's Note: Fe(III) falls to Fe(II); S2− rises to S, so H2S is the reductant.

Exam Note: Species that gets reduced is the oxidising agent.

Question MCQ 12. Number of moles of KMnO4 required to oxidise one mole of Fe(C2O4) in acidic medium is (a) 0.6 (b) 1.67 (c) 0.2 (d) 0.4 (Haryana C.E.E.T. 1996)

Solution. Correct option: (a) 0.6.

Teacher's Note: Fe2+ gives 1 e− and C2O42− gives 2 e−: 3 e−/5 = 0.6.

Exam Note: Add electrons lost by both ions, divide by 5.

Question MCQ 13. In the reaction, 3Br2 + 6CO32− + 3H2O → 5Br− + BrO3− + 6HCO3− (a) Bromine is oxidised and carbonate is reduced (b) Bromine is reduced and water is oxidised (c) Bromine is neither reduced nor oxidised (d) Bromine is both reduced and oxidised (I.I.T. 1996)

Solution. Correct option: (d) Bromine is both reduced and oxidised.

Teacher's Note: Br2 goes to Br− (0 to −1) and BrO3− (0 to +5): disproportionation.

Exam Note: Same element in both oxidation and reduction products.

Question MCQ 14. A standard hydrogen electrode has zero electrode potential because (a) hydrogen is easiest to oxidise (b) this electrode potential is assumed to be zero (c) hydrogen atom has only one electron (d) hydrogen is the lightest element (I.I.T. 1997)

Solution. Correct option: (b) this electrode potential is assumed to be zero.

Teacher's Note: Zero is an arbitrary reference convention, not a property of hydrogen.

Exam Note: Say it is assumed by convention.

Question MCQ 15. Which of the following is a redox reaction? (a) H2SO4 with NaOH (b) In atmosphere, O3 from O2 by lightning (c) Nitrogen oxides from nitrogen and oxygen by lightning (d) Evaporation of H2O (C.B.S.E. P.M.T. 1997)

Solution. Correct option: (c) Nitrogen oxides from nitrogen and oxygen by lightning.

Teacher's Note: N2 + O2 → 2NO changes both from 0; O2 to O3 changes no O.N.

Exam Note: Allotrope formation is not redox.

Question MCQ 16. The oxidation potentials of A and B are +2.37 V and +1.66 V respectively. In a chemical reaction, (a) A will be replaced by B (b) A will replace B (c) A will not replace B (d) A and B will not replace each other (U.P.S.E.A.T. 1996; Pb.C.E.E. 1997)

Solution. Correct option: (b) A will replace B.

Teacher's Note: Higher oxidation potential means a stronger reductant that displaces the other.

Exam Note: Compare oxidation potentials, larger one displaces.

Question MCQ 17. Which among the following is the strongest reducing agent? Given Fe2+ + 2e− → Fe (−0.44 V); Ni2+ + 2e− → Ni (−0.25 V); Sn2+ + 2e− → Sn (−0.14 V) and Fe3+ + e− → Fe2+ (−0.77 V) (a) Fe (b) Fe2+ (c) Ni (d) Sn (B.H.U. 1998)

Solution. Correct option: (b) Fe2+.

Teacher's Note: Printed data: lowest potential (−0.77 V) is Fe3+/Fe2+, so Fe2+ reduces best.

Exam Note: Lowest reduction potential means strongest reducing agent.

Question MCQ 18. Without losing its concentration, ZnCl2 solution cannot be kept in contact with (a) Au (b) Al (c) Pb (d) Ag (C.B.S.E. P.M.T. 1998)

Solution. Correct option: (b) Al.

Teacher's Note: Al (−1.66 V) is below Zn (−0.76 V) and displaces zinc from its salt.

Exam Note: Only a metal with lower E° than zinc reacts.

Question MCQ 19. The standard reduction potential values of three metallic cations X, Y, Z are 0.52, −3.03 and −1.18 V respectively. The order of reducing power of the corresponding metal is (a) Y > Z > X (b) X > Y > Z (c) Z > Y > X (d) Z > X > Y (I.I.T. 1998)

Solution. Correct option: (a) Y > Z > X.

Teacher's Note: The more negative the reduction potential, the stronger the metal as a reductant.

Exam Note: Rank E° from most negative upward.

Question MCQ 20. The oxidation number of sulphur in S8, S2F2, H2S respectively, are (a) 0, +1 and −2 (b) +2, +1 and −2 (c) 0, +1 and +2 (d) −2, +1 and −2 (I.I.T. 1999)

Solution. Correct option: (a) 0, +1 and −2.

Teacher's Note: S8 is elemental (0); in S2F2 each F is −1 so S is +1; in H2S it is −2.

Exam Note: Use fluorine = −1 and hydrogen = +1.

Question MCQ 21. A gas at 1 atm is bubbled through a solution containing a mixture of 1 M Y− and 1 M Z− at 25°C. If the reduction potential of Z > Y > X, then (a) Y will oxidise X and not Z (b) Y will oxidise Z and not X (c) Y will oxidise both X and Z (d) Y will reduce both X and Z (I.I.T. 1999)

Solution. Correct option: (a) Y will oxidise X and not Z.

Teacher's Note: Higher reduction potential means stronger oxidant: Y oxidises X− but cannot oxidise Z−.

Exam Note: Compare reduction potentials of the three couples.

Question MCQ 22. A metal ion M3+ loses 3 electrons, its oxidation number will be (a) +3 (b) +6 (c) 0 (d) −3 (C.P.M.T. 1999)

Solution. Correct option: (b) +6.

Teacher's Note: Losing 3 more electrons raises the oxidation number from +3 to +6.

Exam Note: Losing electrons increases oxidation number.

Question MCQ 23. To an acid solution of an anion, a few drops of KMnO4 solution are added. Which of the following, if present, will not decolourise the KMnO4 solution? (a) CO32− (b) NO2− (c) S2− (d) Cl− (D.C.E. 1999)

Solution. Correct option: (a) CO32−.

Teacher's Note: Carbonate carbon is already +4 and cannot be oxidised; NO2−, S2−, Cl− reduce permanganate.

Exam Note: Only a reductant decolourises KMnO4.

Question MCQ 24. The partial ionic equation, Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O suggests that the equivalent weight of Cr2O72− will be equal to its formula weight divided by (a) 3 (b) 6 (c) 1 (d) 14 (D.C.E. 1999)

Solution. Correct option: (b) 6.

Teacher's Note: Equivalent weight = formula weight / electrons gained = M/6.

Exam Note: Divide by the electrons in the half equation.

Question MCQ 25. Oxidation state of osmium (Os) in OsO4 is (a) +7 (b) +6 (c) +4 (d) +8 (A.I.I.M.S. 1999)

Solution. Correct option: (d) +8.

Teacher's Note: Four O at −2 total −8, so Os = +8, the highest known oxidation state.

Exam Note: Neutral compound: sum of O.N. is zero.

Question MCQ 26. Fluorine is the best oxidising agent because it has (a) highest electron affinity (b) highest E°reduction (c) highest E°oxidation (d) lowest electron affinity (Haryana C.E.E.T. 1999)

Solution. Correct option: (b) highest E°reduction.

Teacher's Note: F2/F− has E° = +2.87 V, the highest reduction potential.

Exam Note: Oxidising power is measured by reduction potential.

Question MCQ 27. A compound contains atoms of three elements A, B and C. If the oxidation number of A is +2, B is +5 and that of C is −2, the possible formula of the compound is (a) A3(BC4)2 (b) A3(B4C)2 (c) ABC2 (d) A3(BC3)2 (C.B.S.E. P.M.T. 2000)

Solution. Correct option: (a) A3(BC4)2.

Teacher's Note: A3(BC4)2: 3(+2) + 2(+5 − 8) = 6 − 6 = 0.

Exam Note: Total charge must be zero.

Question MCQ 28. In the given reaction, K2Cr2O7 + XH2SO4 + YSO2 → K2SO4 + Cr2(SO4)3 + ZH2O, X, Y, Z are (a) 1, 3, 1 (b) 4, 1, 4 (c) 3, 2, 3 (d) 2, 1, 2 (B.H.U. 1994, 2000)

Solution. Correct option: (a) 1, 3, 1.

Teacher's Note: Balanced: K2Cr2O7 + H2SO4 + 3SO2 → K2SO4 + Cr2(SO4)3 + H2O.

Exam Note: Cr gains 6 e−, each SO2 gives 2 e−: 3 SO2.

Question MCQ 29. The oxidation number of iron in Fe3O4 is (a) +2 (b) +3 (c) 8/3 (d) 2/3 (C.B.S.E. P.M.T. 1999; Haryana C.E.E.T. 2000)

Solution. Correct option: (c) 8/3.

Teacher's Note: 3x + 4(−2) = 0 gives x = 8/3, the average of Fe(II) and Fe(III).

Exam Note: Average value, since Fe3O4 is FeO·Fe2O3.

Question MCQ 30. Which will be the proper alternative in place of A in the following equation? 2Fe3+(aq) + Sn2+(aq) → 2Fe2+(aq) + A (a) Sn4+ (b) Sn3+ (c) Sn2+ (d) Sn (M.P.C.E.E. 2000)

Solution. Correct option: (a) Sn4+.

Teacher's Note: Two Fe3+ take 2 e− from Sn2+, which becomes Sn4+.

Exam Note: Balance charge: 6 + 2 = 4 + 4.

Question MCQ 31. Number of moles of K2Cr2O7 reduced by 1 mole of Sn2+ is (a) 1/6 (b) 1/3 (c) 2/3 (d) 1 (Haryana C.E.E.T. 1996, 2000)

Solution. Correct option: (b) 1/3.

Teacher's Note: Sn2+ gives 2 e−, dichromate takes 6 e−: 2/6 = 1/3 mole.

Exam Note: Electron ratio 2 : 6.

Question MCQ 32. Which of the following is not a reducing agent? (a) SO2 (b) H2O2 (c) CO2 (d) NO2 (D.C.E. 2000)

Solution. Correct option: (c) CO2.

Teacher's Note: Carbon in CO2 is at its highest oxidation state (+4), so it cannot be oxidised.

Exam Note: Highest oxidation state means no reducing action.

Question MCQ 33. Equivalent mass of oxidising agent in the reaction, SO2 + 2H2S → 3S + 2H2O is (a) 32 (b) 64 (c) 16 (d) 8 (D.C.E. 2000)

Solution. Correct option: (c) 16.

Teacher's Note: SO2 is reduced (S: +4 to 0, 4 e−); equivalent mass = 64/4 = 16.

Exam Note: Identify the oxidant first, then divide by electrons gained.

Question MCQ 34. The oxidation state of chromium in [Cr(PPh3)3(CO)3] is (a) +3 (b) +8 (c) zero (d) +5 (D.C.E. 2000)

Solution. Correct option: (c) zero.

Teacher's Note: PPh3 and CO are neutral ligands in a neutral complex, so Cr is 0.

Exam Note: Neutral ligands, neutral complex.

Question MCQ 35. The values of x and y in the following redox reaction, xCl2 + 6OH− → ClO3− + yCl− + 3H2O are (a) x = 2, y = 4 (b) x = 5, y = 3 (c) x = 3, y = 5 (d) x = 4, y = 2 (C.P.M.T. 2000)

Solution. Correct option: (c) x = 3, y = 5.

Teacher's Note: Balanced: 3Cl2 + 6OH− → ClO3− + 5Cl− + 3H2O.

Exam Note: Chlorine disproportionates: 5 e− lost, 5 gained.

Question MCQ 36. Amongst the following, identify the species with an atom in +6 oxidation state (a) MnO4− (b) Cr(CN)63− (c) NiF62− (d) CrO2Cl2 (I.I.T. 2000)

Solution. Correct option: (d) CrO2Cl2.

Teacher's Note: Others: Mn +7, Cr +3, Ni +4; CrO2Cl2 gives Cr +6.

Exam Note: Compute each central atom, do not guess from names.

Question MCQ 37. For the electrochemical cell, M | M+ || X− | X, E°M+/M = 0.44 V and E°X/X− = −0.33 V. From these data one can deduce that (a) M + X → M+ + X− is the spontaneous reaction (b) M+ + X− → M + X is the spontaneous reaction (c) Ecell = 0.77 V (d) Ecell = −0.77 V (I.I.T. 2000)

Solution. Correct option: (b) M+ + X− → M + X is the spontaneous reaction.

Teacher's Note: E°cell = −0.77 V, so the reverse reaction is spontaneous. (d) is also true; printed key is (b).

Exam Note: Negative E°cell means the written reaction is non-spontaneous.

Question MCQ 38. In the standardization of Na2S2O3 using K2Cr2O7 by iodometry, the equivalent weight of K2Cr2O7 is (a) (molecular weight)/2 (b) (molecular weight)/6 (c) (molecular weight)/3 (d) same as molecular weight (I.I.T. 2001)

Solution. Correct option: (b) (molecular weight)/6.

Teacher's Note: Dichromate takes 6 e− (Cr(VI) to Cr(III)), so equivalent weight is M/6.

Exam Note: Count electrons gained per formula unit.

Question MCQ 39. The reaction, 3ClO−(aq) → ClO3−(aq) + 2Cl−(aq) is an example of (a) Oxidation reaction (b) Reduction reaction (c) Disproportionation reaction (d) Decomposition reaction (I.I.T. 2001)

Solution. Correct option: (c) Disproportionation reaction.

Teacher's Note: Cl goes +1 to +5 and +1 to −1 simultaneously: the same species is oxidised and reduced.

Exam Note: One reactant, two oxidation-state changes.

Question MCQ 40. Standard electrode potentials are Fe2+/Fe, E° = −0.44 V; Fe3+/Fe2+, E° = 0.77 V. If Fe2+, Fe3+ and Fe blocks are kept together, then (a) Fe3+ increases (b) Fe3+ decreases (c) Fe2+/Fe3+ remains unchanged (d) Fe2+ decreases (C.B.S.E. P.M.T. 2001)

Solution. Correct option: (b) Fe3+ decreases.

Teacher's Note: Fe + 2Fe3+ → 3Fe2+ is spontaneous (E° = 0.77 + 0.44 = 1.21 V), so Fe3+ falls.

Exam Note: Iron metal reduces Fe3+ to Fe2+.

Question MCQ 41. The reduction potentials of Zn, Cu, Fe and Ag are in the order: (a) Ag, Cu, Fe, Zn (b) Cu, Ag, Fe, Zn (c) Zn, Cu, Fe, Ag (d) Fe, Zn, Cu, Ag (N.S.E. 2001)

Solution. Correct option: (a) Ag, Cu, Fe, Zn.

Teacher's Note: Order of decreasing E°: Ag (+0.80), Cu (+0.34), Fe (−0.44), Zn (−0.76).

Exam Note: Use the electrochemical series values.

Question MCQ 42. Standard electrode potential data are useful for understanding the suitability of an oxidant in a redox titration. Some half cell reactions and their standard potentials are: MnO4−(aq) + 8H+(aq) + 5e− → Mn2+(aq) + 4H2O(l), E° = 1.51 V; Cr2O72−(aq) + 14H+(aq) + 6e− → 2Cr3+(aq) + 7H2O(l), E° = 1.38 V; Fe3+(aq) + e− → Fe2+(aq), E° = 0.77 V; Cl2(g) + 2e− → 2Cl−(aq), E° = 1.40 V. Identify the only incorrect statement regarding the quantitative estimation of aqueous Fe(NO3)2 (a) MnO4− can be used in aqueous HCl (b) Cr2O72− can be used in aqueous HCl (c) MnO4− can be used in aqueous H2SO4 (d) Cr2O72− can be used in aqueous H2SO4 (I.I.T. 2002)

Solution. Correct option: (a) MnO4− can be used in aqueous HCl.

Teacher's Note: Permanganate (1.51 V) oxidises chloride (1.40 V); dichromate (1.38 V) does not.

Exam Note: An oxidant must not oxidise the acid medium.

Question MCQ 43. When KMnO4 acts as an oxidising agent and ultimately forms MnO42−, MnO2, Mn2O3 and Mn2+, then the number of electrons transferred in each case respectively is (a) 4, 3, 1, 5 (b) 1, 5, 3, 7 (c) 1, 3, 4, 5 (d) 3, 5, 7, 1 (A.I.E.E.E. 2002)

Solution. Correct option: (c) 1, 3, 4, 5.

Teacher's Note: Mn(VII) to Mn(VI), (IV), (III), (II) gains 1, 3, 4, 5 electrons respectively.

Exam Note: Subtract final O.N. from +7.

Question MCQ 44. Which of the following is a redox reaction? (a) NaCl + KNO3 → NaNO3 + KCl (b) CaC2O4 + 2HCl → CaCl2 + H2C2O4 (c) Mg(OH)2 + 2NH4Cl → MgCl2 + 2NH4OH (d) Zn + 2AgCN → 2Ag + Zn(CN)2 (A.I.E.E.E. 2002)

Solution. Correct option: (d) Zn + 2AgCN → 2Ag + Zn(CN)2.

Teacher's Note: Zn goes 0 to +2 and Ag +1 to 0; the others are double decomposition.

Exam Note: Look for an element changing oxidation number.

Question MCQ 45. A smuggler could not carry gold by depositing iron on the gold surface since (a) Gold is denser (b) Iron rusts (c) Gold has higher electrode potential than iron (d) Gold has lower electrode potential than iron (Karnataka C.E.T. 2002)

Solution. Correct option: (c) Gold has higher electrode potential than iron.

Teacher's Note: Gold (+1.50 V) oxidises Fe (−0.44 V) to Fe2+; the iron coating dissolves.

Exam Note: Compare standard electrode potentials of Au and Fe.

Question MCQ 46. The oxidation states of sulphur in the anions SO32−, S2O42− and S2O62− follow the order: (a) S2O42− < SO32− < S2O62− (b) SO32− < S2O42− < S2O62− (c) S2O42− < S2O62− < SO32− (d) S2O62− < S2O42− < SO32− (C.B.S.E. P.M.T. 2003)

Solution. Correct option: (a) S2O42− < SO32− < S2O62−.

Teacher's Note: S is +4 in SO32−, +3 in S2O42− and +5 in S2O62−.

Exam Note: Solve each ion algebraically.

Question MCQ 47. Which of the following is actually possible if oxidation potentials of Zn = +0.76 V and Ag = −0.80 V? (a) Zn + 2Ag+ → Zn2+ + 2Ag (b) Zn2+ + 2Ag → Zn + 2Ag+ (c) 2Zn + 2Ag → Zn2+ + 2Ag+ (d) Zn2+ + Ag+ → Zn + Ag (Wardha M.G.I.M.S. 2003)

Solution. Correct option: (a) Zn + 2Ag+ → Zn2+ + 2Ag.

Teacher's Note: E°cell = 0.76 + 0.80 = +1.56 V for zinc displacing silver.

Exam Note: Positive total potential means spontaneous.

Question MCQ 48. For decolourization of 1 mole of KMnO4, the moles of H2O2 required is (a) 1/2 (b) 3/2 (c) 5/2 (d) 7/2 (A.I.I.M.S. 2004)

Solution. Correct option: (c) 5/2.

Teacher's Note: 2KMnO4 + 5H2O2 (acid): 1 mole KMnO4 needs 5/2 mole H2O2.

Exam Note: Equate 5 e− gained to 2 e− per H2O2.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Complete Math Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 9 Redox Reactions Part 2

Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 9 Redox Reactions Part 2 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.