Chapter-wise Worksheets for Class 10 Physics: Physics Practical Viva Questions
Review targeted academic worksheets with the Physics Practical Viva Questions CBSE Class 10 Physics Worksheets Set 05. Built according to official educational standards for the 2026-27 term, these downloadable Class 10 Physics resources support effective daily practice and detailed self-evaluation for Physics Practical Viva Questions.
Practice Class 10 Physics Worksheets: Physics Practical Viva Questions
View or download the dedicated Physics Practical Viva Questions CBSE Class 10 Physics Worksheets Set 05 resource below. Engaging with these practice papers under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Physics Practical Viva Questions.
Questions with Answers
Question 1. The vernier of a pair of calipers has 10 divisions equal to 9 divisions of the main scale, and one main scale division is 1 mm. Find its least count.
Answer:
Value of 1 vernier division = 9/10 mm = 0.9 mm. Least count = 1 mm \( - \) 0.9 mm = 0.1 mm = 0.01 cm.
In simple words: Least count = difference between a main scale division and a vernier division: 0.01 cm.
Teacher's Note:
1. Least count = 1 main scale division / number of vernier divisions.
2. It is the smallest length the instrument can measure.
Question 2. A vernier reads 3.1 cm on the main scale and the 8th vernier division coincides with a main scale line. The instrument has a least count of 0.01 cm and a zero error of +0.04 cm. Find the true length.
Answer:
Observed reading = 3.1 + 8 \( \times \) 0.01 = 3.18 cm.
The zero error is positive (the instrument reads +0.04 cm with jaws closed), so the correction is \( - \)0.04 cm.
True length = 3.18 \( - \) 0.04 = 3.14 cm.
In simple words: Subtract a positive zero error from the reading.
Teacher's Note:
1. True reading = observed reading \( - \) zero error.
2. A negative zero error is added.
Question 3. When the jaws of a vernier calipers are closed, the 6th division of a vernier of 10 divisions and least count 0.01 cm coincides with a main scale line, and the zero of the vernier lies to the right of the main scale zero. What is the zero error?
Answer:
The zero of the vernier is to the right of the zero of the main scale, so the error is positive.
Positive zero error is the number of the coinciding division times the least count = 6 \( \times \) 0.01 = +0.06 cm.
(If the zero lay to the left, the error would be negative: \( - \)(10 \( - \) 6) \( \times \) 0.01 = \( - \)0.04 cm.)
In simple words: Zero error is +0.06 cm.
Teacher's Note:
1. Read the coinciding division and check the side of the main scale zero.
2. Zero error is found before measuring.
Question 4. A screw gauge has a pitch of 1 mm and 100 divisions on its head scale. Find its least count. A wire gives a pitch scale reading of 2 mm and a head scale reading of 45, with a zero error of +5 divisions. Find the diameter of the wire.
Answer:
Least count = 1 mm / 100 = 0.01 mm.
Observed reading = 2 + 45 \( \times \) 0.01 = 2.45 mm.
Zero error = +5 \( \times \) 0.01 = +0.05 mm, to be subtracted.
Diameter = 2.45 \( - \) 0.05 = 2.40 mm.
In simple words: Least count 0.01 mm and corrected diameter 2.40 mm.
Teacher's Note:
1. Diameter of a wire is the mean of readings in two perpendicular directions.
2. Use the ratchet to avoid squeezing the wire.
Question 5. In a simple pendulum experiment, the length of the pendulum is 1.00 m and 20 oscillations take 40.2 s. Find the value of g.
Answer:
T = 40.2/20 = 2.01 s.
g = 4\( \pi ^2 \)l/T\( ^2 \) = 39.48 \( \times \) 1.00 / (2.01)\( ^2 \) = 39.48/4.040.
g \( \approx \) 9.77 m/s\( ^2 \).
In simple words: Find T, then use g = 4\( \pi ^2 \)l/T\( ^2 \): 9.77 m/s\( ^2 \).
Teacher's Note:
1. Timing many oscillations reduces the error in T.
2. The accepted value of g is about 9.8 m/s\( ^2 \).
Question 6. What is the length of a seconds pendulum at a place where g = 9.8 m/s\( ^2 \)?
Answer:
A seconds pendulum has period T = 2 s.
l = gT\( ^2 \)/4\( \pi ^2 \) = 9.8 \( \times \) 4 / 39.48.
l = 0.993 m, about 99.3 cm.
In simple words: A pendulum of length about 99.3 cm ticks seconds.
Teacher's Note:
1. Each swing from one side to the other takes one second.
2. Length is measured to the centre of the bob.
Question 7. A copper block of mass 200 g at 100 \( ^\circ \)C is dropped into a calorimeter containing water, the water equivalent of water and calorimeter together being 200 g at 25 \( ^\circ \)C. The final temperature is 31.2 \( ^\circ \)C. Find the specific heat of copper.
Answer:
Heat lost by copper = 200 \( \times \) c \( \times \) (100 \( - \) 31.2) = 200 \( \times \) c \( \times \) 68.8.
Heat gained by water and calorimeter = 200 \( \times \) (31.2 \( - \) 25) = 200 \( \times \) 6.2 = 1240 cal.
c = 1240/13760 = 0.090 cal/g \( ^\circ \)C.
In simple words: Heat lost by copper equals heat gained by water, giving c = 0.09.
Teacher's Note:
1. Specific heat of water is 1 cal/g \( ^\circ \)C.
2. Insulate the calorimeter to reduce heat loss.
Question 8. 40 g of dry ice at 0 \( ^\circ \)C is added to a calorimeter in which the water equivalent of the water and calorimeter is 220 g at 40 \( ^\circ \)C. The final temperature is 21.5 \( ^\circ \)C. Find the latent heat of fusion of ice.
Answer:
Heat lost by water and calorimeter = 220 \( \times \) (40 \( - \) 21.5) = 220 \( \times \) 18.5 = 4070 cal.
Heat gained by the ice = 40L (melting) + 40 \( \times \) 21.5 (warming the water from 0 to 21.5 \( ^\circ \)C) = 40L + 860.
40L + 860 = 4070, so L = 3210/40 = 80.25 cal/g, about 80 cal/g.
In simple words: The latent heat of fusion of ice is about 80 cal/g.
Teacher's Note:
1. The ice must be wiped dry before it is added.
2. The result agrees with the standard value of 80 cal/g.
Question 9. 10 g of dry steam at 100 \( ^\circ \)C is passed into a calorimeter whose water equivalent (water and calorimeter) is 200 g at 20 \( ^\circ \)C. The final temperature is 49.5 \( ^\circ \)C. Find the latent heat of steam.
Answer:
Heat gained by water and calorimeter = 200 \( \times \) (49.5 \( - \) 20) = 5900 cal.
Heat lost by steam = 10L + 10 \( \times \) 1 \( \times \) (100 \( - \) 49.5) = 10L + 505.
10L + 505 = 5900, so L = 539.5 cal/g, about 540 cal/g.
In simple words: The latent heat of steam is about 540 cal/g.
Teacher's Note:
1. The steam condenses and the water formed then cools to the final temperature.
2. Use a steam trap to avoid carrying water into the calorimeter.
Question 10. In a resonance column experiment a tuning fork of frequency 512 Hz gives the first resonance at 16.0 cm and the second at 49.5 cm. Find the speed of sound and the wavelength.
Answer:
\( \lambda \)/2 = l\( _2 \) \( - \) l\( _1 \) = 49.5 \( - \) 16.0 = 33.5 cm, so \( \lambda \) = 67.0 cm = 0.67 m.
v = n\( \lambda \) = 512 \( \times \) 0.67 = 343 m/s.
In simple words: Wavelength 0.67 m and speed 343 m/s.
Teacher's Note:
1. The end correction cancels when l\( _2 \) \( - \) l\( _1 \) is used.
2. The speed of sound is about 343 m/s at 20 \( ^\circ \)C.
Question 11. A bar magnet is placed on a sheet of paper with its north pole pointing south. Where are the neutral points found, and why?
Answer:
The neutral points lie on the axis of the magnet, one near each end. The earth's horizontal field points north. On the axis, the field of the magnet points southward at a point beyond its north pole and also on the other side of the south pole, in direction opposite to the earth's field. At a certain distance the two fields are equal and opposite, so the resultant field is zero.
In simple words: On the axial line, where the magnet's field cancels the earth's field.
Teacher's Note:
1. With the north pole pointing north, the neutral points are on the equatorial line.
2. A compass needle does not point in any particular direction at a neutral point.
Question 12. What is the effect of the position of the zero mark on the reading of a vernier calipers?
Answer:
If the zero mark of the vernier is to the right of that of the main scale when the jaws are closed, every reading is too large by the zero error, which must be subtracted. If the zero mark is to the left, the readings are too small and the error must be added. The correction is found before the experiment and applied to all readings.
In simple words: A positive error is subtracted and a negative error is added.
Teacher's Note:
1. Zero errors are not mistakes of the observer but defects of the instrument.
2. The correction is the same for all readings.
Free study material for Science
Download Class 10 Physics Physics Practical Viva Questions Practice Worksheets
Daily Practice Questions for Class 10 Physics
Review targeted practice exercises for Class 10 Physics Physics Practical Viva Questions. Curated to match official CBSE guidelines, these printable problem sets support daily revision and improve overall test readiness.
Detailed Answers for Class 10 Physics Physics Practical Viva Questions
Designed around the official curriculum for Class 10 Physics, these practice sheets guarantee standard compliance. Reviewing step-by-step solutions after completion sharpens your accuracy and clarifies complex sub-topics within Physics Practical Viva Questions.
Complete Your Chapter Revision
Follow up your worksheet practice by attempting the interactive online MCQ tests for Physics Practical Viva Questions to evaluate your execution speed. All printable assignments and revision sheets on our platform are updated for the 2026 session and available free of charge.
FAQs
You can download the latest chapter-wise printable worksheets for Class 10 Physics Physics Practical Viva Questions for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.
Yes, Class 10 Physics worksheets for Physics Practical Viva Questions focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.
Yes, we have provided solved worksheets for Class 10 Physics Physics Practical Viva Questions to help students verify their answers instantly.
Yes, our Class 10 Physics test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.
For Physics Practical Viva Questions, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.