Step-by-Step LA Sena Solutions for JEE Physics Chapter 09 Atomic Nuclear Physics
Access comprehensive textbook solutions for Chapter 09 Atomic Nuclear Physics using the LA Sena reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Download Chapter 09 Atomic Nuclear Physics Textbook Solutions PDF
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 9 Atomic and Nuclear Physics - Questions 9.1 to 9.34
9. Atomic and Nuclear Physics
Question 9.1. A proton that has flown over a great distance hits a proton that is at rest. The impact parameter is zero, that is, the velocity of the incident proton is directed along the straight line connecting the centers of the protons. The mass of the proton is known, m, and the initial velocity of the incident proton is v0. How close will the incident proton get to the fixed proton? (Fig. 9.1 shows the incident proton moving with velocity v along the line joining the two protons.)
Solution. The protons move toward each other until their relative velocity becomes equal to zero. When the velocity is zero, the incident proton slows down and the immobile proton begins to accelerate, so that the distance between the two protons starts to increase. According to momentum conservation, when this happens, mv0 becomes equal to 2mv, where v is the velocity of both protons at the moment when the distance between the protons is minimal. At this moment both the velocities and, hence, the kinetic energies of the two protons are the same. The difference between the initial kinetic energy of the incident proton and the total kinetic energies of the two protons is equal to the energy associated with the interaction between the protons:
mv02/2 − 2 · m(v0/2)2/2 = e2/(4πε0r),
whence
r = e2/(πε0mv02).
Teacher's Note: At closest approach both protons share velocity v0/2 (momentum conservation); lost kinetic energy becomes electrostatic energy.
Exam Note: Write momentum and energy equations separately; state result r = e²/(πε₀mv₀²).
Question 9.2. Suppose that the energy required to ionize a hydrogen atom is Wi. Must the electron, the hydrogen ion, and the helium ion have the same initial kinetic energies for the hydrogen atom to become ionized?
Solution. Assuming that ionization occurs as a result of a completely inelastic collision, we can write
mv0 = (m + mH)u,
where m is the mass of the incident particle, mH the mass of a hydrogen atom, v0 the initial velocity of the incident particle, and u the final common velocity of the particle after collision. Prior to collision, the kinetic energy of the incident particle was
W0 = mv02/2.
The total kinetic energy after collision is
W = (m + mH)u2/2 = m2v02/[2(m + mH)].
The decrease in kinetic energy must be equal to the ionization energy:
W0 − W = Wi = [mH/(m + mH)] W0.
The greater the mass of the incident particle, the smaller the fraction of the initial kinetic energy that can be used for ionization. When an electron is used as the ionization agent, the initial kinetic energy of the electron is almost completely used for ionization. When an accelerated ion of hydrogen is used for ionization, the initial kinetic energy must be double that of the electron, and when ionization is initiated by a helium atom, the energy must be five times that of the electron. This estimate explains why in a gas-discharge plasma, ionization is initiated almost exclusively by electrons, while ionization by the proper ions plays practically no role.
Teacher's Note: Heavier projectile wastes more energy as bulk motion: W0 = Wi(m+mH)/mH gives about 1, 2, 5 times Wi.
Exam Note: Treat as inelastic collision; ratios 1 : 2 : 5.
Question 9.3. The system of quantum levels of an atom is assumed to be like the one depicted in the figure (Fig. 9.3: a set of horizontal levels n = 1, 2, 3, 4, 5, … converging toward n = ∞). How will each of the energy components of the electron (the kinetic energy and the potential energy) vary if the electron moves from a lower level to a higher level?
Solution. The kinetic energy of the electron in a hydrogen-like atom is
Wkin = me4Z2/(8ε02n2h2),
while the potential energy is
Wpot = −me4Z2/(4ε02n2h2).
As n grows (i.e. as the electron moves to higher levels), Wkin decreases in inverse proportion to n2, while Wpot grows, tending to the maximal value of Wpot = 0 as n → ∞. The total energy,
W = −me4Z2/(8ε02n2h2),
also tends to zero as n → ∞. The minimal value of the total energy is
Wmin = −me4Z2/(8ε02h2).
Obviously, to detach the electron from the atom, the following work must be performed:
A = Wmax − Wmin = 0 − (−me4Z2/(8ε02h2)) = me4Z2/(8ε02h2).
The ratio of this quantity to the elementary charge e is known as the ionization potential. This is the minimal potential difference that a particle of minimal mass and carrying the elementary charge (practically an electron) must pass for the given atom to become ionized.
Teacher's Note: Going up, kinetic energy falls as 1/n², potential energy rises toward zero; total = −(kinetic) also rises.
Exam Note: State both variations with the n² dependence; mention total energy.
Question 9.4. The quantum levels of atoms of hydrogen and deuterium are only approximately the same (the difference between the two systems of levels is exaggerated in the figure; Fig. 9.4 shows two level systems, 1 and 2, with n = 1, 2, 3, 4, 5, …, ∞). Which system of levels belongs to which atom? What is the reason for this discrepancy?
Solution. The wave number of the emission lines of a hydrogen-like atom (when an electron “travels” from one quantum level to another) is given by the formula
̃ν = RZ2(1/k2 − 1/n2),
where R is the Rydberg constant. For a nucleus of infinite mass,
R∞ = me4/(8ε02h3c).
For a nucleus that has a finite mass M we must substitute the reduced mass
μ = m/(1 + m/M)
for the electron mass m. Assuming that the electron energy is zero at infinity, we arrive at the following formula for the energy level with the principal quantum number n:
Wn = −R∞ ch/n2 · 1/(1 + m/M).
This formula shows that the greater the mass of the nucleus, the deeper are the levels of the nucleus and the greater the separation of the levels and the higher the frequency of the spectral line reflecting the transition between levels with the same initial quantum numbers and the same final quantum numbers. Of course, since m ≪ M, the difference between the corresponding values is small, but for hydrogen and deuterium it is sufficiently high. The aforesaid implies that system 1 belongs to deuterium and system 2, to hydrogen.
Teacher's Note: Heavier nucleus means reduced mass closer to m, so deeper levels: deuterium has the deeper, wider-spaced system.
Exam Note: Link reduced mass to Rydberg constant; assign deuterium to system 1.
Question 9.5. Every other spectral line in one of the spectral series of an ionized helium atom (the Pickering series) closely resembles a line in the Balmer series for hydrogen (Fig. 9.5 compares the two series in the 400–700 nm region). What is the principal quantum number of the level to which the electrons transfer when these lines are emitted? Why don’t the lines coincide exactly? What is the meaning of the lines that lie in between the lines of the Balmer series?
Solution. An ionized helium atom belongs to the class of atoms known as hydrogen-like, for which the following general series formula is valid:
̃ν = RMZ2(1/k2 − 1/n2),
where Z is the proton number. The Rydberg constant for an atom whose mass is M is
RM = R∞ / (1 + m/M). (9.5.1)
If we ignore the difference between the Rydberg constants for hydrogen and a helium ion, then it can be assumed that the lines of the first coincide with the lines of the second. This occurs if
4(1/kHe2 − 1/nHe2) = 1/kH2 − 1/nH2.
In the Balmer series, k = 2. We set nH = nHe = ∞. Then
kHe = 4 and nHe = 6, 8, 10, 12, ….
In the spectrum of a helium ion, between these lines are the lines for which nHe = 5, 7, 9, 11, …. These lines are also shown in the figure accompanying the problem. We note, in connection with formula (9.5.1), that since RHe > RH, the lines of a helium atom correspond to slightly higher frequencies than the corresponding lines in the Balmer series.
Teacher's Note: With Z=2, Pickering lines (final level 4) coincide with Balmer when n is even; odd n lines fall in between.
Exam Note: Show even-n coincidence; note RHe > RH.
Question 9.6. Four lines in the Balmer series lie in the visible part of the spectrum. What must the principal quantum number of the electron level in a doubly ionized lithium atom be for the lines emitted when electrons go over to this level to lie close to the lines of the Balmer series? What is the overall number of lines lying in this wavelength region?
Solution. For a doubly ionized lithium atom, Z = 3. For this reason the spectral lines of the lithium ion are described by the general series formula
̃ν = 9R(1/kLi2 − 1/nLi2).
For the Balmer series we have kH = 2, whereby only the lines of lithium that obey the relationship 9/kLi2 = 1/4 can be found in the visible spectrum. Hence
kLi = 6.
The last line in the Balmer series corresponds to a value of the principal quantum number nH being equal to 6. The corresponding line for lithium exists at 9/nLi2 = 1/62, that is, at
nLi = 18.
Thus, in the spectral region of the first four lines of the Balmer series the overall number of lines is 12 (nLi = 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18). The lines with nLi = 9, 12, 15, 18 lie close to the lines in the Balmer series with nH = 3, 4, 5, 6. Since there is a small difference in the values of the Rydberg constant, these lines do not coincide exactly. The difference is somewhat greater than in the case of the Pickering series.
Teacher's Note: Z²=9 forces final level k=6; lines n=9,12,15,18 match Balmer n=3,4,5,6 (nLi=3nH).
Exam Note: Equate 9/k² to 1/4: k=6; count lines 7 to 18.
Question 9.7. An electron moving in an atom is acted upon by the Coulomb force of attraction generated by the nucleus. Can an external electric field be created that is capable of neutralizing the Coulomb force and ionizing, say, a hydrogen atom? Field strengths that can be created by modern devices are about 107 to 108 V/m.
Solution. The electric field in which the electron is moving is
E = e/(4πε0r2), (9.7.1)
where r is the radius of the electron orbit according to the “classical” Bohr theory. In the ground state of the hydrogen atom, the radius of the orbit is r1 = 5.29 × 10−11 m. Formula (9.7.1) then yields the following value for the electric field strength:
E = 5.15 × 1011 V/m,
which exceeds all practically attainable field strengths by several orders of magnitude. However, if an electron is moving along a circular orbit which corresponds to a value of the principal quantum number that differs from unity, the radius of such an orbit is
r = r1n2,
and the electric field strength proves to be inversely proportional to n4 (the book prints n2). Corrected: since E ∝ 1/r2 and r = r1n2, E = 5.15 × 1011/n4 V/m; for n = 10 this is about 5 × 107 V/m, which lies within the limits of practically attainable fields. Indeed, the ionization of highly excited states of the hydrogen atom by an electric field was actually observed in experiments.
Teacher's Note: E ∝ 1/r² ∝ 1/n⁴: ground state needs 5×10¹¹ V/m, but n≈10 needs only ~5×10⁷ V/m.
Exam Note: Compute E at r₁, scale as 1/n⁴; excited states ionize.
Question 9.8. In a He-Ne laser, the helium atoms are excited from the ground state to two sublevels, 21S and 23S, interact with Ne atoms, and give off their energy to Ne atoms, with the result that the latter are transferred to the 3S and 2S levels. The Ne atoms in these states emit radiation and go over to the 2P level. In the figure, the 3S and 2S levels, each consisting of four sublevels, and the 2P level, which consists of ten sublevels, are depicted by broad black bands. In addition to the above-mentioned transitions, a transition from the 3S state to the 3P level is possible, but we do not show this transition in the figure. From the 2P state, Ne atoms go over to the 1S state, and then gradually return to their ground state. Why don’t He atoms emit radiation during transitions from the 21S and 23S states directly to the ground state? What must be the relationship between the lifetimes of Ne atoms in states 3S, 2S, and 2P for continuous generation of radiation to be possible? It has been established that of the two transitions, 3S → 2P and 2S → 2P, one is accompanied by radiation in the visible spectrum and the other, in the IR spectrum. Which transition corresponds to which spectrum?
Solution. Optical transitions between the ground state of helium and the 21S and 23S states are forbidden by selection rules. Although the selection rules that forbid such transitions are not absolute, they nevertheless permit defining the 21S and 23S states as metastable with lifetimes of the order of 10−3 s, which is an extremely large time interval on the scale of atomic processes. Excitation to such levels is possible in a discharge almost exclusively due to electron impact. What is needed for continuous generation of radiation is inverted population of levels. This becomes possible if the lifetime on the higher level exceeds considerably the lifetime on the lower level, with the result that the lower level has time to “get rid” of the electrons before new electrons arrive. Indeed, the lifetime of the 2S and 3S atomic states is of the order of 10−6 s, while the lifetime of state 2P is of the order of 10−8 s. In the first of the two transitions 3S → 2P and 2S → 2P the energy changes by a larger amount; hence a quantum of a higher frequency corresponds to this transition, and this frequency lies in the visible spectrum (λ = 632.8 nm), while the second transition corresponds to a quantum with a lower frequency, λ = 1153 nm, which lies in the IR region.
Teacher's Note: Metastable levels are long-lived; inversion needs upper lifetime longer than lower. Larger gap 3S→2P is visible.
Exam Note: Name selection rules, lifetime ordering, and 632.8 nm vs 1153 nm.
Question 9.9. The angular momentum of electrons in an atom and its spatial orientations can be depicted schematically by a vector diagram where the length of the vector is proportional to the absolute value of the orbital angular momentum of an electron (Fig. 9.9 shows five vectors of equal length with different orientations). What vectors in the diagram correspond to the minimal value of the principal quantum number n and what are the values of the quantum numbers l and m?
Solution. Since the length of all the vectors is the same, the absolute values of the angular momenta in all the states are the same, too. If the orbital quantum number is l, the magnetic quantum number m may assume 2l + 1 different values. The figure accompanying the problem shows five different states. Hence, l = 2. The value of l cannot exceed n − 1, whereby the minimal value of the principal quantum number is 3. The values −2, −1, 0, +1, +2 of the magnetic quantum number correspond to different orientations of the angular momentum vector.
Teacher's Note: Five orientations means 2l+1 = 5, so l=2; since l ≤ n−1, n must be at least 3.
Exam Note: State l=2, nmin=3, m = −2 to +2.
Question 9.10. In the Stern-Gerlach experiment, which was conducted with the aim of discovering the spatial quantization of an atomic magnetic moment, a beam of silver atoms is sent through a nonuniform magnetic field generated by magnets whose configuration is shown in the figure (Fig. 9.10). Why does the experiment require a nonuniform field?
Solution. In a uniform magnetic field, a magnetic dipole, which is an object possessing a magnetic moment, experiences only a torque. For a force to act on a magnetic dipole, the field must be nonuniform. For an atomic magnetic moment this force is defined by the expression
F = μ dB/dz, (9.10.1)
where μ is the magnetic moment of the atom. In formula (9.10.1) we assume that the vector of magnetic induction of the magnetic field generated by the atom is oriented along the lines of force of the external magnetic field and its direction coincides with that of the induction B of the external magnetic field or is opposite. In the first case the atom is pulled into the region where the field is stronger, while in the second case it is pushed out of that region. In the Stern-Gerlach experiment, the beam of silver atoms is sent through the (nonuniform) magnetic field and splits into two beams in accordance with two possible directions of the magnetic moment of a silver atom. If there was no spatial quantization, the silver atom would be oriented at random and the beam would spread in all directions. The silver atoms in the beam are in the ground state, whereby the difference in orientation is due to the different directions of the magnetic moment of outer electrons in silver atoms.
Teacher's Note: Only a field gradient gives a net force F = μ dB/dz; a uniform field gives torque only, no deflection.
Exam Note: Quote F = μ dB/dz; two beams show spatial quantization.
Question 9.11. The intensity distribution of X-ray radiation over wavelengths consists of a continuous spectrum, which is limited from the short-wave side by a limit wavelength λm, and a characteristic spectrum, which consists of separate peaks. In the figure (with an arbitrary scale) we depict such a distribution for a voltage U1 applied to the X-ray tube (Fig. 9.11). How will the distribution change if the voltage is decreased three-fold, that is, U2 = (1/3)U1?
Solution. The minimal wavelength in the X-ray spectrum is determined by the maximal energy which a bombarding electron may transfer to the anode. This energy is eU and, hence,
λmin = ch/eU.
If the voltage is decreased three-fold, the minimal wavelength increases three-fold, too. As the figure accompanying the problem shows, as a result of such an increase in the wavelength the short-wave peak, which is one of the characteristics of the material of the anode, disappears. Separate characteristic peaks may disappear even when the wavelength corresponding to these peaks is longer than λmin if to excite the quantum level from which the transition that generates the radiation with the wavelength corresponding to a particular peak begins an energy higher than eU0 is required.
Teacher's Note: Duane-Hunt limit λmin = ch/eU triples; characteristic peaks need excitation energy above eU, so short-wave ones vanish.
Exam Note: Give λmin ∝ 1/U; say which peaks disappear and why.
Question 9.12. An electron is inside a potential well with vertical walls. The electronic wave function is depicted in the figure (Fig. 9.12). Is the depth of the well finite or infinite?
Solution. In an infinitely deep potential well, the wave function at the boundary of the well (x = 0 and x = l) is zero. Since the figure accompanying the problem clearly shows that the wave function does not vanish at the boundary, we conclude that the well is of finite depth.
Teacher's Note: An infinite well forces ψ=0 at the walls; a nonzero ψ there (penetrating the wall) means finite depth.
Exam Note: State boundary condition ψ(0)=ψ(l)=0 for infinite wells.
Question 9.13. An electron is in motion in a potential well of infinite depth. Depending on the electron kinetic energy, the electronic wave function has different configurations depicted in the figure (Fig. 9.13). Which of these states is retained when the width of the potential well is decreased two-fold? By what factor will the minimal kinetic energy of the electron change in the process?
Solution. In a potential well of infinite depth the wave function at the “walls” of the well must vanish. This means that only states labeled by even numbers, e.g. 2, 4, 6, etc., may remain. The distance between the nodes of a standing wave function is equal to one-half of the de Broglie wavelength:
λ/2 = h/(2mv).
The maximal value of λ is a, which means that the electron velocity has a minimal value v = h/2ma, and hence the minimal value of the electron energy is Wmin = h2/8ma2. If the width of the well decreases two-fold, the minimal kinetic energy of the electron in the well increases four-fold.
Teacher's Note: Halving width keeps only states with an even number of half-waves; Emin = h²/8ma² ∝ 1/a² so it quadruples.
Exam Note: Quote h²/(8ma²); factor 4 from halving a.
Question 9.14. From the viewpoint of the optical analogy of the wave properties of an electron, the regions of space where it possesses different potential energies may be interpreted as regions with different refractive indices. In the figure (Fig. 9.14) two such regions are depicted, the regions are separated by a boundary where the potential energy P experiences a jump. In which of these regions is the refractive index greater? In which of the two cases, when the electron moves from left to right or when it moves from right to left, will the phase of the wave function be retained under reflection of the electron from the barrier, and in which will it change to its opposite?
Solution. If the initial kinetic energy of the electron in the motion from left to right is E, to the right of the barrier it will be E − P. In the first case the de Broglie wavelength is
λ1 = h/√(2mE),
while in the second it is
λ2 = h/√(2m(E − P)).
The wavelength ratio is in inverse proportion to the refractive index ratio:
n2/n1 = λ1/λ2 = √((E − P)/E).
The right region can be considered as being less optically dense, whereby when the electron is moving from left to right the phase is retained, while when the electron is moving from right to left, the phase changes to its opposite.
Teacher's Note: Kinetic energy E−P is smaller on the right, so wavelength is longer: right region is optically less dense (n∝1/λ).
Exam Note: Reflection from the optically denser side flips phase, as with light.
Question 9.15. An electron moving from left to right meets an obstacle, which in one case is a step (Figure (a)), and in the other a barrier (Figure (b)). What are the probabilities of the electron overcoming the step and the barrier according to the classical theory and the quantum theory in two separate cases, namely, when the electron kinetic energy E is lower than P and when it is higher than P? (Fig. 9.15: (a) a potential step of height P; (b) a potential barrier of height P and finite width, beginning at x0.)
Solution. From the viewpoint of classical mechanics, for E < P the probability is zero in both cases, while for E > P it is equal to unity (“step” 1 in Figures (a) and (b) accompanying the answer). From the viewpoint of quantum mechanics, however, in the first case for E < P the probability is also zero, whereas for E > P the probability is lower than unity (curve 2 in Figure (a) accompanying the answer), since there is a nonzero probability of the electrons being reflected from the step, in other words, a fraction of the electrons moving from left to right begins to move in the opposite direction. Partial reflection takes place even when the potential energy to the left of x0 is greater than the potential energy to the right of x0 rather than lower. For the potential barrier depicted in Figure (b) accompanying the problem there is a nonzero probability of the electrons tunneling through the barrier even when E < P, but this probability does not become equal to unity even when E > P (curve 2 in Figure (b) accompanying the answer). The passage of electrons through the potential barrier when E < P under the conditions that the barrier has a finite width and that the potential energy to the right of the barrier is equal to or less than to the left of the barrier became known as the tunneling effect. This effect is encountered in many atomic and nuclear processes and in the field emission of electrons by metals and semiconductors. The probability of electrons passing through the barrier for E < P is the higher the lower and narrower the barrier.
Passage probability D against E: quantum curve 2 rises smoothly from zero and stays below the classical step 1 (D = 0 for E < P, 1 for E > P); in (b) it is nonzero even for E < P (tunneling). Schematic.
Teacher's Note: Classical: 0 below, 1 above P. Quantum: partial reflection above step; barrier allows tunneling below P, never exactly 1.
Exam Note: Contrast classical step function with quantum curve; name tunneling effect.
Question 9.16. An electron moving from left to right passes through three regions: I, II, and III. Its kinetic energy in regions I and III is the same, E. Assuming the potential energy in these two regions to be zero, find the relationship between the kinetic energy E and the potential energy P in region II if the electronic wave function has the configuration depicted in the figure (Fig. 9.16: sinusoidal in regions I and III, decaying exponentially in region II).
Solution. In region II, the wave function does not obey the sinusoidal law; it falls off exponentially. This happens within the framework of classical mechanics when a negative kinetic energy is assigned to the electron, or E < P. The passage of the electron into region III, which is forbidden from the classical standpoint, can be observed in experiments if the width of region II is sufficiently small (of the order of the electron wavelength in region I) and if the difference between P and E is not too great (see Problem 9.15). This phenomenon (the tunneling effect) resembles the partial passage of light across a narrow gap between two prisms (see the figure accompanying the answer) with the incident light experiencing total internal reflection in the first prism.
Teacher's Note: Exponential decay in II means E < P (classically forbidden); a thin region allows tunneling into III.
Exam Note: Answer E < P; link exponential decay to tunneling.
Question 9.17. According to classical kinetic theory, absolute zero is the temperature at which molecular motion ceases. In relation to a solid body, this means that the thermal oscillatory motion of atoms or molecules forming the crystal lattice also ceases. Is the same conclusion valid from the standpoint of quantum mechanics?
Solution. The statement that the energy of the vibrational motion of atoms or molecules in a crystal lattice is nil at absolute zero contradicts one of the main principles of quantum mechanics, the uncertainty principle. If the kinetic energy is zero, so is the momentum. But if an atom or a molecule is at rest, its position is fixed. In other words, each coordinate and the projection of momentum on the respective coordinate axis are known with absolute accuracy. Meanwhile the wave properties of particles permit determining the collection of a coordinate and the respective projection of momentum within the intervals Δpx and Δx, where in accordance with the uncertainty principle
ΔpxΔx ≥ h/2π.
For this reason the energy of the atoms or molecules of a crystal is not nil at absolute zero. The motion of these objects is vibrational (zero-point vibrations), and the energy associated with this motion is the zero-point energy
E0 = (1/2)hν = (h/4π)ω,
where ω is the natural cyclic frequency of the vibration of a particle in the lattice. The existence of zero-point vibrations has been proved in experiments. They manifest themselves in light scattering in crystals at temperatures close to absolute zero.
Teacher's Note: Fixed position and zero momentum together violate Δp·Δx ≥ h/2π, so zero-point energy E₀ = hν/2 remains at 0 K.
Exam Note: Cite uncertainty principle and zero-point energy hν/2.
Question 9.18. In an experiment set up to study the diffraction of electrons, a beam of electrons whose energy can be varied by varying a potential difference is directed to a surface of a single crystal at an angle θ. The diffracted (scattered) beam is analyzed by a detector positioned at the same angle θ (Figure (a)). In the experiment, the current of the scattered electrons was measured as a function of the applied potential difference used to accelerate the electrons. The results were plotted on a diagram, with the square root of the accelerating voltage laid off on the horizontal axis and the electron current, along the vertical axis. The curve consists of a number of alternating maxima and minima. As Figure (b) shows, the distance between the maxima at first is not the same, and the greater the voltage, the smaller the discrepancy. Explain the pattern of maxima and minima.
Solution. The diffraction of electrons by a crystal obeys the same Bragg law as X-ray diffraction does:
2d sin θ = kλ.
In this formula λ = h/mv is the de Broglie wavelength. Substituting the necessary constants (the electron mass and charge and the Planck constant) and transforming the units of measurement, we arrive at the following formula (here U is the potential difference through which the electron travels and, hence, the electron energy expressed in electron volts):
λ = √(1.5/U) nm. (9.18.1)
According to this formula, diffraction maxima are observed for the following wavelengths: λ0 (k = 1), (1/2)λ0 (k = 2), (1/3)λ0 (k = 3), etc. Corrected: since λ ∝ 1/√U, the voltages that determine the electron energy are U0, 4U0, 9U0, etc. (the book prints U0, U0√2, U0√3), that is, √U = √U0, 2√U0, 3√U0, … If on the horizontal axis we lay off the square roots of the values of the accelerating voltage, as is done in Figure (b) accompanying the problem, the current maxima must be spaced by equal distances. In experiments, however, this condition is not met exactly, and the smaller the voltage the greater the deviation from this pattern. The reason for this is that formula (9.18.1) contains the energy (in electron volts) of an electron inside the metal, and this quantity is the sum of the energy acquired by the electron in passing the potential difference and the difference in potential energies of the electron inside and outside the metal. Therefore, along the horizontal axis in Figure (b) accompanying the problem we must lay off √(U + Φ) rather than √U, where Φ is the internal potential in the metal. The quantity measured in experiments is, of course, U. Electron diffraction patterns obtained as a result of electron scattering on a metal lattice make it possible to obtain Φ.
Teacher's Note: Bragg maxima need λ=2d sinθ/k, so √U is equally spaced; deviation at low U arises from internal potential Φ.
Exam Note: Use √(U+Φ), not √U; equal spacing then follows.
Question 9.19. The number of protons and the number of neutrons in the nuclei of stable isotopes are laid off on the horizontal and vertical axes, respectively. Why does the fraction of neutrons in the overall number of nucleons increase with the mass number of the nuclei?
Solution. The stability of a nucleus is ensured by the fact that the Coulomb repulsive force experienced by each proton in the nucleus is equal to the force of nuclear attraction (the nuclear force). The Coulomb force falls off with distance relatively slowly (in inverse proportion to the square of the distance), while the nuclear force falls off very rapidly. For this reason the protons are held in the nucleus only by the closest neutrons, while experiencing the repulsive action of all the protons in the nucleus, even those farthest from a given proton. Thus, as the general number of nucleons grows, more and more neutrons are required so as to compensate for the growing action of the Coulomb repulsive forces.
Teacher's Note: Coulomb repulsion is long-range and acts among all protons; nuclear force is short-range, so extra neutrons dilute repulsion.
Exam Note: Contrast long-range Coulomb with short-range nuclear force.
Question 9.20. How many nucleons can there be in a nucleus on the lowest quantum level?
Solution. According to the Pauli exclusion principle, a single quantum level can carry no more than two identical particles with half-integral spin. The directions of the spins must be opposite. In a nucleus such particles are the nucleons, protons and neutrons. Since these are distinct particles, there can be not more than four nucleons on the lowest level — two neutrons and two protons.
Teacher's Note: Pauli principle allows two identical spin-½ particles per level; protons and neutrons are distinct, so 2+2.
Exam Note: Answer 4 (2 protons + 2 neutrons), citing Pauli principle.
Question 9.21. A counter registers the rate of radioactive decay, that is, the number of radioactive decay acts taking place every second. The results obtained in such measurements are plotted in the form of a diagram in which the time interval from the beginning of counting is laid off on the horizontal axis and the logarithm of the decay rate, on the vertical axis (Fig. 9.21: a straight line sloping downward). How to find the half-life of the radioactive element from such a diagram?
Solution. If N0 is the number of radioactive atoms in the radioactive sample at the beginning of counting and λ is the decay constant, then at time t after the beginning of counting the number of atoms will be
N = N0e−λt. (9.21.1)
The rate with which this number changes is
dN/dt = −λN0e−λt = −λN.
A counter registers only the radioactive particles that fly in its direction. The fraction of such particles in the overall number of radioactive particles emitted by the sample depends on the size and position of the counter and can be characterized by a factor a (with a < 1). Thus, the counting rate can be expressed in the form
γ = a|dN/dt| = aN0λe−λt.
Taking logs, we get
log γ = log(aN0λ) − λt.
To determine the half-life of the radioactive element, there is no need to measure the slope and find the λ vs. t dependence and, using the well-known formula, to calculate T1/2. Suffice it to lay off in any place on the vertical axis a segment equal to the logarithm of two (irrespective of what logarithms are laid off on the vertical axis, base-10 or base-e) and draw through the end points of this segment straight lines parallel to the horizontal axis. The points at which these straight lines intersect the experimental straight line that represents the variation in the rate of counting determine the boundaries of the time interval in the course of which the counting rate decreases by a factor of 2. Since the experimental law representing the decrease in the counting rate with the passage of time coincides with the law representing the decrease in the number of radioactive atoms (9.21.1), this time interval is the sought half-life.
(Figure 9.21 in the book, described in words: the straight line of log γ against t slopes downward; a vertical segment of length log 2 is marked on the vertical axis, horizontal lines are drawn through its end points to meet the line, and the horizontal distance between those two intersection points is T1/2.)
Teacher's Note: log γ falls linearly with slope −λ; a vertical segment of length log 2 gives, horizontally, the half-life T½.
Exam Note: Mark vertical log 2 segment; read horizontal gap as T½.
Question 9.22. In the Periodic Table, we select three consecutive elements, say, a, b, and c. A radioactive isotope of element a whose proton and mass numbers are placed at the symbol of the element transforms into element b, which in turn transforms into element c. This last element transforms into an isotope of the initial element a. What processes cause the transformations a → b, b → c, and c → a? What are the proton and mass numbers of the nuclei of elements b and c and those of the nucleus of element a after the final transformation is completed? (Fig. 9.22 shows three adjacent cells of the Periodic Table labelled a (with proton number n and mass number m), b, c.)
Solution. A shift to the right by one place in the Periodic Table occurs as a result of a beta decay act. The mass number does not change in this act while proton number increases by unity. Hence,
nam → n+1bm + −1β0, n+1bm → n+2cm + −1β0.
A shift to the left by two places occurs in alpha decay. The mass number decreases by four, while the proton number decreases by two:
n+2cm → nam−4 + 24He.
The mass number of the resulting isotope of atom a differs from the initial number by four units.
Examples of such radioactive transformations are the chains of transformations in the 23892U and 23290Th families:
23892U → 23490Th → 23491Pa → 23492U → 23090Th,
23290Th → 22888Ra → 22889Ac → 22890Th → 22488Ra.
Corrected: the book prints the third member of the first chain as 23491Ra; the element with proton number 91 is protactinium (Pa), as written above. Summary: a → b and b → c are beta decays; c → a is alpha decay; b = (n+1, m), c = (n+2, m), final a = (n, m−4).
Teacher's Note: Two β decays raise Z by 2; one α decay lowers Z by 2 and A by 4.
Exam Note: Write nuclear equations with conserved A and Z; give (n,m−4).
Question 9.23. A number N0 of atoms of a radioactive element are placed inside a closed volume. The radioactive decay constant for the nuclei of this element is λ1. The daughter nuclei that form as a result of the decay process are assumed to be radioactive, too, with a radioactive decay constant λ2. Determine the time variation of the number of such nuclei. Consider two limiting cases: λ1 ≫ λ2 and λ1 ≪ λ2.
Solution. In the course of the time interval dt the number of nuclei of the new element (the “daughter” nuclei) changes thanks to the emergence of new nuclei as a result of the decay of initial (or “parent”) nuclei and the departure of new nuclei as a result of their decay:
dN2 = N1λ1dt − N2λ2dt.
Here N1 is the number of parent nuclei and N2 is the number of the daughter nuclei at the given moment. According to the law of radioactive decay, N1 = N0e−λ1t. Thus,
dN2 = λ1N0e−λ1tdt − λ2N2dt,
or
dN2/dt + λ2N2 = λ1N0e−λ1t. (9.23.1)
We start by considering the limiting cases.
(1) λ1 ≫ λ2. If we rewrite (9.23.1) in the form
d(N2/N0)/dt + λ2N2/N0 = λ1e−λ1t
and assume that after a small time interval we can set e−λ1t = 0, we obtain
N2/N0 = (N20/N0) e−λ2t.
With λ1 ≫ λ2 we can assume that N20 = N0, so that
N2 = N0e−λ2t.
Physically this means that parent nuclei practically instantly transform into daughter nuclei, which then decay according to the law of radioactive decay with a certain decay constant.
(2) λ1 ≪ λ2. In this case the number of parent nuclei can be assumed to remain constant over a sizable time interval and is equal to N0. This transforms (9.23.1) into
dN2/dt = −(λ2N2 − λ1N0),
which after integration yields
N2 = (λ1/λ2)N0(1 − e−λ2t).
The number of daughter nuclei tends to a constant (saturation) value (see Figure (a) accompanying the answer):
N2 = (λ1/λ2)N0. (9.23.2)
Of course, over a long time interval this number will decrease in accord with the decrease of the number of parent nuclei, whereby a more exact form of (9.23.2) is
N2 = (λ1/λ2)N0e−λ1t.
An example of the case with λ1 ≪ λ2 is the radioactive decay of radium 22688Ra with a decay constant equal to 1.354 × 10−11 s−1 (a half-life of 1622 years). Its product is radon 22286Rn with a decay constant equal to 2.097 × 10−6 s−1 (a half-life of 3.825 days). If radium is placed inside a closed vessel, already after one month the amount of radon in the vessel will be only 0.4% less than the equilibrium amount, while the equilibrium amount, as shown by (9.23.2), constitutes only 6.46 parts to a million of the initial number of radium atoms.
To find the overall dependence of N2 on t, we must integrate Eq. (9.23.1). The solution has the form (obtained with the substitution z = N2eλ2t, which gives dz = λ1N0e(λ2−λ1)tdt and z = [λ1N0/(λ2−λ1)](e(λ2−λ1)t − 1)):
N2 = [λ1N0/(λ2 − λ1)] (e−λ1t − e−λ2t).
This expression has a maximum at a value of t equal to tm, which can be found if we nullify the derivative dN2/dt:
tm = (ln λ2 − ln λ1)/(λ2 − λ1).
The N2 vs. t curve is depicted in Figure (b) accompanying the answer (it rises from zero to a single maximum at tm and then decays; in the case λ1 ≪ λ2, Figure (a), it rises to the saturation level (λ1/λ2)N0).
Teacher's Note: Daughter balance dN₂/dt = λ₁N₁ − λ₂N₂; general solution has one maximum at t_m, limits give decay or saturation.
Exam Note: Write general N₂(t); give both limits and t_m.
Question 9.24. The track of a beta particle (an electron) in a Wilson chamber has the shape of a limacon (a spiral) (Fig. 9.24). Where does the track begin and where does it end? How is the magnetic field that forces the beta particle to move in this manner directed?
Solution. As the electron moves in the Wilson chamber, it gradually loses its energy to ion formation, and it is on these ions that drops of mist form, which make visible the track of the electron. This loss of energy results in a loss of speed, which means that the radius of curvature of the electron trajectory in the external magnetic field becomes smaller, since
R = mv/eB.
The wider part of the spiral corresponds to the beginning of the track, and the narrower part corresponds to the end of the track. If we take into account the negativity of the electron charge and the direction of its motion in the chamber, we can conclude that the magnetic field is directed toward the reader.
Teacher's Note: Energy lost to ionization lowers v, so R = mv/eB shrinks: the wide end of the spiral is the start.
Exam Note: Use R = mv/eB; note the electron's negative charge.
Question 9.25. In beta decay, the velocity of the nucleus that emits an electron is not directed along the line along which the electron velocity is directed (Fig. 9.25). How can this phenomenon be explained?
Solution. According to Pauli’s hypothesis, which was verified in experiments, simultaneously with the escape of an electron the nucleus emits a neutrino (more precisely, an antineutrino), which is the particle that carries off a fraction of the energy released in beta decay and which has a momentum whose vector sum with the electron momentum is zero:
ZXA → Z+1YA + −1β0 + ν̃.
Teacher's Note: Momentum conservation across three bodies: an unseen antineutrino balances the electron and recoiling nucleus, so they are not collinear.
Exam Note: Mention Pauli's neutrino hypothesis and momentum conservation.
Question 9.26. The track of a proton in a Wilson chamber has a “knee”, where the proton changes its trajectory by 45° (Fig. 9.26). Momentum and energy conservation implies that the proton has collided with a neutron. Which of the two particles has a higher energy if the neutron is considered to be initially at rest or free?
Solution. The proton and neutron masses can be considered practically equal. When the proton and the neutron collide, the scattering angle after collision will be 90°, whereby after collision the direction of the neutron velocity will also make an angle of 45° with the initial direction of the proton velocity. Thus, after collision the proton and neutron energies are practically the same.
Teacher's Note: Equal masses, one at rest: outgoing paths perpendicular, so both leave at 45° with equal energy.
Exam Note: Equal masses: 90° between paths, so equal energies.
Question 9.27. The track of an alpha particle in a Wilson chamber filled with a gas has a “knee”, where the particle changes its direction of flight by an angle greater than 90° (Fig. 9.27). Starting with what gas in the Periodic Table is such a track possible?
Solution. A change in the direction of motion (following a collision act) by an angle greater than 90° is possible if the mass of the incident particle is smaller than that of the particle that initially was at rest (in the laboratory system). The mass of the atom and molecule of hydrogen is smaller than the mass of an alpha particle, while the mass of helium is equal to the mass of an alpha particle. The gas closest to helium in the Periodic Table that has a mass greater than the mass of the alpha particle is nitrogen.
Teacher's Note: Deflection beyond 90° needs a target heavier than the alpha particle; H₂ and He are not.
Exam Note: Condition: target mass greater than projectile; answer nitrogen.
Question 9.28. Two radioactive ions are emitted by an accelerator in the same direction with the same velocity v whose absolute value is close to the speed of light. Following this event, the nuclei of the ions emit electrons (each nucleus emits one electron). The velocity of one electron coincides in direction with v while the velocity of the other electron is in opposition to v. With respect to the nuclei the electron velocities (their absolute values, that is) are the same, v. Find the electron velocities with respect to the (fixed) accelerator and the velocity of one electron with respect to the other. (Fig. 9.28)
Solution. The relative velocity, according to the relativistic formula for velocity addition, is
vrel = (v1 + v2)/(1 + v1v2/c2).
The velocity of the electron flying away from the accelerator with respect to the accelerator is
Va = 2v/(1 + v2/c2),
while the velocity of the electron flying toward the accelerator is
Vb = 0.
The relative velocities of the electrons with respect to each other are:
Vab = 2v/(1 + v2/c2)
for the electron moving away from the accelerator, and
Vba = −2v/(1 + v2/c2)
for the electron moving toward the accelerator, that is, they are equal in absolute value.
For the sake of an example we assume that v = 0.9c. In this case the velocity of the electron flying away from the accelerator and the relative velocities of the electrons are related through the following formula:
Va = Vab = −Vba = 1.8/(1 + 0.81) c = 0.9945c.
Teacher's Note: Relativistic velocity addition (v₁+v₂)/(1+v₁v₂/c²): one electron ends at rest in the lab, the other moves at 2v/(1+v²/c²).
Exam Note: Never add speeds classically; at v=0.9c result is 0.9945c.
Question 9.29. Within the framework of the “classical” Bohr theory, an excited atom is an atom one electron of which moves along an orbit that is farther from the nucleus than in the ground state (Figure (a)). When the atom goes over to its ground state (Figure (b)), the atom emits a photon. In the literature, especially popular-science literature, the common way to describe this process is to say that mass has transformed into energy. Is this actually the case?
Solution. The statement carries no physical meaning whatsoever. First, there is not a single physical quantity that can transform into another physical quantity (time cannot transform into area, field strength into length, and so on). Second, for processes in relation to which this statement is usually made, the common conservation laws, the energy conservation law and the mass conservation law, are valid, that is, if isolated systems are considered. In the case at hand, these balance equations are as follows:
E* = E + hν
for energy (here E* is the energy of the excited atom, E is the energy of the atom in the ground state, and hν is the photon energy), and
m* = m + μ0
for mass (here m* is the mass of the excited atom, m is the mass of the atom in the ground state, and μ0 = hν/c2 is the photon “mass”).
The first balance equation expresses the law of energy conservation and the second, the law of mass conservation (for the same process).
Teacher's Note: Mass and energy are separately conserved with E=mc²: the photon carries both; nothing converts into something else.
Exam Note: Write both balance equations; reject 'conversion'.
Question 9.30. Two charged particles acquire equal energy when moving in an accelerator. The dependence of the mass of each particle on the energy acquired is depicted by curves 1 and 2 in the figure (Fig. 9.30: the plot of m/m0 against W consists of two straight lines starting at the same point on the vertical axis, line 1 steeper than line 2). Which of the two particles has a greater rest mass?
Solution. The ratio of the mass of a moving particle to the rest mass of that particle is
m/m0 = 1/√(1 − v2/c2).
The kinetic energy acquired by a particle in an accelerator is determined by the following difference:
Wkin = mc2 − m0c2 = m0c2(1/√(1 − v2/c2) − 1),
whence
m/m0 = Wkin/(m0c2) + 1.
For a fixed value of Wkin, the ratio m/m0 is the smaller the greater m0 is and, hence, curve 2 corresponds to the particle with the greater rest mass.
Teacher's Note: Plot of m/m₀ against W has slope 1/(m₀c²): the gentler line (curve 2) is the heavier particle.
Exam Note: Use m/m₀ = 1 + W/(m₀c²); smaller slope means larger m₀.
Question 9.31. The principle of operation of a linear accelerator is illustrated in the figure accompanying the problem (Fig. 9.31: a source S followed by a row of cylinders 1, 2, …, N connected alternately to the two terminals of an alternating voltage). A charged particle is emitted by a source and is accelerated by a potential difference U between source S and cylinder 1. During the time it takes the particle to fly through cylinder 1, the potential difference between 1 and the next cylinder, 2, changes its sign and, leaving cylinder 2, the particle again finds itself in an accelerating field with the same potential difference U. The length of cylinder 2 is selected such that when the particle leaves this cylinder, the field will again change sign, so that the particle is accelerated anew, and so on. If the particle has passed N gaps between the cylinders, the energy it acquires is W = eUN (it is assumed that the particle is singly charged). Since as the particle is accelerated the path it traverses in the course of a single change in polarity between the cylinders increases, each subsequent cylinder must be longer than the previous one. However, at a certain high energy the size of cylinders ceases to grow. What determines the maximal length of a cylinder if the frequency of variation of the voltage between the cylinders is ν?
Solution. If the kinetic energy of the particle is Wkin, its velocity can be found from the equation
Wkin = m0c2(1/√(1 − v2/c2) − 1),
with the result that
v2/c2 = 1 − (m0c2/(Wkin + m0c2))2.
If Wkin ≪ m0c2, we arrive at an expression for the velocity that is identical to the one following from classical mechanics and electrodynamics:
v = √(2eU0N/m0).
The voltage across the cylinders changes its sign in the course of a half-period T/2 = 1/2ν, whereby the length of the cylinders must increase according to the law
lN = (1/2ν)√(2eU0/m0) N1/2.
However, as Wkin grows, the velocity grows slower and slower. Corrected: the book states that for v = 0.87c, 0.89c and 0.90c we have Wkin = m0c2, 2m0c2 and 3m0c2; from Wkin = m0c2(γ − 1) the correct values are v = 0.866c (≈ 0.87c) for Wkin = m0c2, v = 0.943c for 2m0c2 and v = 0.968c for 3m0c2. For sufficiently high energies the velocity of the particle approaches that of light and the length of the cylinders does not change any more: l = c/2ν (the book prints l = c/ν; since the half-period is 1/2ν and l = v·(1/2ν), the maximal length is c/2ν).
Teacher's Note: Each cylinder length is v/2ν; as v→c it saturates at c/2ν, set by the voltage frequency.
Exam Note: Length = v × half-period 1/2ν; limit c/2ν.
Question 9.32. Why cyclotrons are not employed to accelerate electrons? What generated a need for building more complex accelerators such as the synchrocyclotron and the synchrophasotron?
Solution. The operation of a cyclotron is based on the fact that the time a charged particle takes to perform a full circle in a magnetic field does not depend on the particle’s velocity. The time it takes the particle to complete one-half of a full circle, that is, the time in the course of which the electric field between the Dees reverses its direction, is πm/Be (the book prints πmv/Be; Corrected: the half-circle time is πr/v with r = mv/eB, so it is πm/eB, independent of v). As the particle is accelerated, its mass grows according to the formula
m = m0/√(1 − v2/c2).
The particle moving inside a Dee will gradually begin to get out of step with oscillatory electric field between the Dees.
The electron mass is doubled already at an energy equal to 0.51 MeV, whereby the discrepancy between the time it takes the electron to make a half-circle and the period of reversal of direction of the field between the Dees becomes noticeable already at accelerating voltages of the tens of kiloelectronvolts. This, naturally, limits the possibility of accelerating to high energies electrons in cyclotrons.
For ions, whose rest mass is greater than the electron rest mass by a factor of 103, 104 or even 105, the effect of increase of mass with velocity manifests itself at much higher energies. But here, too, there is a limit of acceleration of such particles in a cyclotron. To overcome this difficulty, other types of accelerators have been designed, in which the frequency of the electric field or the magnetic field is varied in the proper manner (separately or together).
Teacher's Note: Resonance needs fixed half-period πm/eB; mass growth detunes electrons at tens of keV.
Exam Note: Explain resonance condition and relativistic mass gain; name remedies.
Question 9.33. Two samples of radioactive iron 57Fe emit gamma-ray quanta. One sample is placed at an altitude H above sea level and the appropriate detector at sea level, while the second sample is placed at sea level and the appropriate detector at altitude H. Which of the two detected quanta has a higher frequency? (Fig. 9.33)
Solution. The energy of the quantum that flies upward decreases while that of the quantum flying downward increases, as a result of which the frequency of the first gets lower and that of the second, increases. The difference proves to be so small, that could be discovered only after a discovery made by Mössbauer, whose name was later given to this effect. An experiment in “weighing” the photon was conducted later by Pound. The results of these experiments are in full agreement with the theory of relativity. The present problem constitutes a simplified and schematized version of the idea of Pound’s experiment. (So the quantum detected at sea level, emitted from altitude H, has the higher frequency.)
Teacher's Note: A photon gains energy falling in gravity and loses it climbing; the sea-level detector sees the higher frequency.
Exam Note: Say gravitational blueshift; mention Mössbauer/Pound experiment.
Question 9.34. In observing Cerenkov radiation it was found that light propagates at an angle θ to the direction of electron motion. Find the refractive index of the substance in which the radiation is excited. (Fig. 9.34)
Solution. Cerenkov radiation appears when the speed of light in the given medium is lower than the electron velocity. From the figure accompanying the answer we can see how the light wave is formed. In the time that it takes the electron to cover a path AB the light covers a distance AC, with
|AC|/|AB| = c′/v,
where c′ = c/n is the speed of light in the given medium. The envelope of the waves emitted by different points constitutes the wave front BC. The figure accompanying the answer shows that
|AC|/|AB| = cos θ.
The refractive index is
n = c/(v cos θ).
Teacher's Note: Wavefront geometry: light travels AC = (c/n)t while the electron covers AB = vt, so cosθ = c/(nv).
Exam Note: Derive from cosθ = c′/v; result n = c/(v cosθ).
Download LA Sena Solutions for JEE Math PDF
Complete Math Solutions for LA Sena Solutions Physics Chapter 9 Atomic Nuclear Physics
Explore reliable mathematical solutions for LA Sena Solutions Physics Chapter 9 Atomic Nuclear Physics tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for JEE
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for JEE Math
In addition to these LA Sena Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the LA Sena book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.