Official IE Irodov Textbook Solutions: JEE Physics Chapter 08 Relativistic Mechanics
Access comprehensive textbook solutions for Chapter 08 Relativistic Mechanics using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Physics: Chapter 08 Relativistic Mechanics
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 8 Relativistic Mechanics - Questions 340 to 388
Part 1 (Questions 340 to 355)
Question 340. A rod moves lengthwise with a constant velocity v relative to the inertial reference frame K. At what value of v will the length of the rod in this frame be η = 0.5% less than its proper length?
Solution. From the formula for length contraction
l0 − l0√(1 − v²/c²) = η l0
So, 1 − v²/c² = (1 − η)², or v = c√(η(2 − η)).
Numerically, with η = 0.005: v = c√(0.005 × 1.995) = 0.0999c ≈ 0.10c ≈ 3.0 × 107 m/s.
Teacher's Note: Length contraction l = l₀√(1−β²); a small η gives v about 0.1c, not tiny.
Exam Note: Set l = l₀(1−η), square, solve for v.
Question 341. In a triangle the proper length of each side equals a. Find the perimeter of this triangle in the reference frame moving relative to it with a constant velocity V along one of its
(a) bisectors;
(b) sides.
Solution. (a) In the frame in which the triangle is at rest the space coordinates of the vertices are (0, 0, 0), (a√3/2, +a/2, 0), (a√3/2, −a/2, 0), all measured at the same time t. In the moving frame the corresponding coordinates at time t′ are
A: (Vt′, 0, 0), B: ((a/2)√3·√(1 − β²) + Vt′, a/2, 0) and C: ((a/2)√3·√(1 − β²) + Vt′, −a/2, 0).
The perimeter P is then P = a + 2a[(3/4)(1 − β²) + 1/4]1/2 = a(1 + √(4 − 3β²)).
(b) The vertices at rest are A (0, 0, 0), B (a/2, a√3/2, 0), C (a, 0, 0). In the moving frame (side AC along the motion) the coordinates at time t′ are A: (Vt′, 0, 0), B: ((a/2)√(1 − β²) + Vt′, a√3/2, 0), C: (a√(1 − β²) + Vt′, 0, 0).
The perimeter P is then P = a√(1 − β²) + 2 × (a/2)[1 − β² + 3]1/2 = a(√(1 − β²) + √(4 − β²)), where β = V/c.
(The printed figure showing the two triangles is not redrawn; the coordinates above describe it.)
Teacher's Note: Only lengths along the motion contract; transverse coordinates stay unchanged. Add the three side lengths.
Exam Note: Write vertex coordinates, contract x only, sum sides.
Question 342. Find the proper length of a rod if in the laboratory frame of reference its velocity is v = c/2, the length l = 1.00 m, and the angle between the rod and its direction of motion is θ = 45°.
Solution. In the rest frame, the coordinates of the ends of the rod in terms of proper length l0 are A: (0, 0, 0), B: (l0 cos θ0, l0 sin θ0, 0) at time t. In the laboratory frame the coordinates at time t′ are A: (Vt′, 0, 0), B: (l0 cos θ0 √(1 − β²) + vt′, l0 sin θ0, 0).
Therefore we can write l cos θ = l0 cos θ0 √(1 − β²) and l sin θ = l0 sin θ0.
Hence l0² = l²(cos²θ + (1 − β²) sin²θ)/(1 − β²), or l0 = l √((1 − β² sin²θ)/(1 − β²)).
Numerically: β = 1/2, θ = 45°: l0 = 1.00 × √((1 − 0.125)/0.75) = 1.08 m.
Teacher's Note: Longitudinal component contracts, transverse does not; combine components to get l₀.
Exam Note: Quote the formula, then substitute: 1.08 m.
Question 343. A stationary upright cone has a taper angle θ = 45°, and the area of the lateral surface S0 = 4.0 m². Find: (a) its taper angle; (b) its lateral surface area, in the reference frame moving with a velocity v = (4/5)c along the axis of the cone.
Solution. In the frame K in which the cone is at rest the coordinates of A (apex) are (0, 0, 0) and of B (a point on the rim) are (h, h tan θ, 0). In the frame K′, which is moving with velocity v along the axis of the cone, the coordinates of A and B at time t′ are A: (−vt′, 0, 0), B: (h√(1 − β²) − vt′, h tan θ, 0).
Thus the taper angle in the frame K′ is tan θ′ = tan θ/√(1 − β²), and the lateral surface area is
S = π h′² sec θ′ tan θ′ = π h²(1 − β²)·(tan θ/√(1 − β²))·√(1 + tan²θ/(1 − β²)) = S0√(1 − β² cos²θ).
Here S0 = π h² sec θ tan θ is the lateral surface area in the rest frame, h′ = h√(1 − β²), β = v/c.
Numerically: β = 0.8, θ = 45°: tan θ′ = 1/0.6 = 1.667, so θ′ ≈ 59°; S = 4.0 × √(1 − 0.64 × 0.5) = 4.0 × 0.825 ≈ 3.3 m². (Numerical values worked out from the printed formulas.)
Teacher's Note: Only the height along the axis contracts, so the cone gets wider-angled and smaller in area.
Exam Note: Use tanθ′ = tanθ/√(1−β²); area formula; numbers.
Question 344. With what velocity (relative to the reference frame K) did the clock move, if during the time interval t = 5.0 s, measured by the clock of the frame K, it became slow by Δt = 0.10 s?
Solution. Because of time dilation, a moving clock reads less time. We write t − Δt = t√(1 − β²), β = v/c.
Thus 1 − 2Δt/t + (Δt/t)² = 1 − β², or v = c√((Δt/t)(2 − Δt/t)).
Numerically: Δt/t = 0.02, v = c√(0.02 × 1.98) = 0.199c ≈ 6.0 × 107 m/s.
Teacher's Note: Moving clock reads t√(1−β²); lag Δt fixes β. Square carefully.
Exam Note: Equate t−Δt to t√(1−β²); numbers give 0.2c.
Question 345. A rod flies with constant velocity past a mark which is stationary in the reference frame K. In the frame K it takes Δt = 20 ns for the rod to fly past the mark. In the reference frame fixed to the rod the mark moves past the rod for Δt′ = 25 ns. Find the proper length of the rod.
Solution. In the frame K the length l of the rod is related to the time of flight Δt by l = vΔt. In the reference frame fixed to the rod (frame K′) the proper length l0 of the rod is given by l0 = vΔt′.
But l0 = l/√(1 − β²) = vΔt/√(1 − β²), β = v/c. Thus vΔt′ = vΔt/√(1 − β²).
So 1 − β² = (Δt/Δt′)², or v = c√(1 − (Δt/Δt′)²), and l0 = c√((Δt′)² − (Δt)²) = cΔt′√(1 − (Δt/Δt′)²).
Numerically: l0 = 3.0 × 108 × 25 × 10−9 × 0.6 = 4.5 m.
Teacher's Note: Mark-passing time is l/v in K but l₀/v in K′; their ratio gives √(1−β²).
Exam Note: Use l = vΔt and l₀ = vΔt′; answer 4.5 m.
Question 346. The proper lifetime of an unstable particle is equal to Δt0 = 10 ns. Find the distance this particle will traverse till its decay in the laboratory frame of reference, where its lifetime is equal to Δt = 20 ns.
Solution. The distance travelled in the laboratory frame of reference is vΔt where v is the velocity of the particle. But by time dilation Δt = Δt0/√(1 − v²/c²), so v = c√(1 − (Δt0/Δt)²).
Thus the distance traversed is cΔt√(1 − (Δt0/Δt)²).
Numerically: = 3.0 × 108 × 20 × 10−9 × √(1 − 1/4) = 6.0 × 0.866 ≈ 5.2 m.
Teacher's Note: Time dilation gives v from the lifetime ratio; distance is v times the lab lifetime.
Exam Note: Find v from Δt/Δt₀ first; then s = vΔt.
Question 347. In the reference frame K a muon moving with a velocity v = 0.990c travelled a distance l = 3.0 km from its birthplace to the point where it decayed. Find: (a) the proper lifetime of this muon; (b) the distance travelled by the muon in the frame K "from the muon's standpoint".
Solution. (a) If τ0 is the proper life time of the muon the life time in the moving frame is τ0/√(1 − v²/c²) and hence l = vτ0/√(1 − v²/c²).
Thus τ0 = (l/v)√(1 − v²/c²) = (3000/(0.990 × 3.0 × 108)) × 0.141 ≈ 1.4 μs.
(The words "from the muon's stand point" are not part of any standard terminology.)
(b) The path length in the muon's own frame is the contracted distance l√(1 − v²/c²) = 3.0 km × 0.141 ≈ 0.42 km. (Part (b) value worked out here; the printed solution only comments on the wording.)
Teacher's Note: Proper time is shorter than lab time; equivalently the muon sees a contracted path.
Exam Note: Quote τ₀ = (l/v)√(1−β²); state contracted distance too.
Question 348. Two particles moving in a laboratory frame of reference along the same straight line with the same velocity v = (3/4)c strike against a stationary target with the time interval Δt = 50 ns. Find the proper distance between the particles prior to their hitting the target.
Solution. In the frame K in which the particles are at rest, their positions are A and B whose coordinates may be taken as A: (0, 0, 0), B: (l0, 0, 0). In the frame K′ with respect to which K is moving with a velocity v the coordinates of A and B at time t′ in the moving frame are A: (vt′, 0, 0), B: (l0√(1 − β²) + vt′, 0, 0), β = v/c.
Suppose B hits a stationary target in K′ after time t′B while A hits it after time t′B + Δt. Then l0√(1 − β²) + vt′B = v(t′B + Δt).
So l0 = vΔt/√(1 − v²/c²).
Numerically: vΔt = 0.75 × 3.0 × 108 × 50 × 10−9 = 11.25 m; √(1 − 9/16) = 0.661; l0 ≈ 17 m.
Teacher's Note: Lab gap vΔt is the contracted distance; divide by √(1−β²) for the proper gap.
Exam Note: Gap in lab = vΔt; l₀ = that over √(1−β²).
Question 349. A rod moves along a ruler with a constant velocity. When the positions of both ends of the rod are marked simultaneously in the reference frame fixed to the ruler, the difference of readings on the ruler is equal to Δx1 = 4.0 m. But when the positions of the rod's ends are marked simultaneously in the reference frame fixed to the rod, the difference of readings on the same ruler is equal to Δx2 = 9.0 m. Find the proper length of the rod and its velocity relative to the ruler.
Solution. In the reference frame fixed to the ruler the rod is moving with a velocity v and suffers Lorentz contraction. If l0 is the proper length of the rod, its measured length will be Δx1 = l0√(1 − β²), β = v/c.
In the reference frame fixed to the rod the ruler suffers Lorentz contraction and we must have Δx2√(1 − β²) = l0, thus l0 = √(Δx1Δx2) and 1 − β² = Δx1/Δx2, or v = c√(1 − Δx1/Δx2).
Numerically: l0 = √(4.0 × 9.0) = 6.0 m; v = c√(1 − 4/9) = 0.745c ≈ 2.2 × 108 m/s.
Teacher's Note: Each frame sees the other's lengths contracted; multiply and divide the two relations.
Exam Note: Contraction both ways: l₀ = √(Δx₁Δx₂) = 6 m.
Question 350. Two rods of the same proper length l0 move toward each other parallel to a common horizontal axis. In the reference frame fixed to one of the rods the time interval between the moments, when the right and left ends of the rods coincide, is equal to Δt. What is the velocity of one rod relative to the other?
Solution. The coordinates of the ends of the rods in the frame fixed to the left rod are: A (0, 0, 0), B (l0, 0, 0), D (c1 − vt, 0, 0), E (c1 + l0√(1 − β²) − vt, 0, 0). The points B and D coincide when l0 = c1 − vt0, or t0 = (c1 − l0)/v.
The points A and E coincide when 0 = c1 + l0√(1 − β²) − vt1, t1 = (c1 + l0√(1 − β²))/v.
Thus Δt = t1 − t0 = (l0/v)(1 + √(1 − β²)), or (vΔt/l0 − 1)² = 1 − β² = 1 − v²/c².
From this v = (2c²Δt/l0)/(1 + c²Δt²/l0²) = (2l0/Δt)/(1 + (l0/(cΔt))²).
Teacher's Note: First rod is at rest; second is contracted. Time between two coincidences gives an equation for v.
Exam Note: Isolate the root, square, solve for v.
Question 351. Two unstable particles move in the reference frame K along a straight line in the same direction with a velocity v = 0.990c. The distance between them in this reference frame is equal to l = 120 m. At a certain moment both particles decay simultaneously in the reference frame fixed to them. What time interval between the moments of decay of the two particles will be observed in the frame K? Which particle decays later in the frame K?
Solution. In K0, the rest frame of the particles, the events corresponding to the decay of the particles are A: (0, 0, 0, 0) and B: (0, l0, 0, 0). In the reference frame K the corresponding coordinates are by Lorentz transformation A: (0, 0, 0, 0), B: (vl0/(c²√(1 − β²)), l0/√(1 − β²), 0, 0).
Now l0√(1 − β²) = l by the Lorentz-Fitzgerald contraction formula. Thus the time lag of the decay time of B is
Δt = vl0/(c²√(1 − β²)) = vl/(c²(1 − β²)) = vl/(c² − v²).
B decays later (B is the forward particle in the direction of motion).
Numerically: Δt = 0.990 × 120/(3.0 × 108 × 0.0199) ≈ 2.0 × 10−5 s = 20 μs. (Numerical value worked out from the printed formula.)
Teacher's Note: Events simultaneous in the particles' frame are not simultaneous in K; the front one lags.
Exam Note: Use Δt = vl/(c²(1−β²)); front particle decays later.
Question 352. A rod AB oriented along the x axis of the reference frame K moves in the positive direction of the x axis with a constant velocity v. The point A is the forward end of the rod, and the point B its rear end. Find:
(a) the proper length of the rod, if at the moment tA the coordinate of the point A is equal to xA, and at the moment tB the coordinate of the point B is equal to xB;
(b) what time interval should separate the markings of coordinates of the rod's ends in the frame K for the difference of coordinates to become equal to the proper length of the rod.
Solution. (a) In the reference frame K with respect to which the rod is moving with velocity v, the coordinates of A and B at a common time t are A: xA + v(t − tA), B: xB + v(t − tB).
Thus l = xA − xB − v(tA − tB) = l0√(1 − β²). So l0 = [xA − xB − v(tA − tB)]/√(1 − v²/c²).
(b) ±l0 − v(tA − tB) = l = l0√(1 − v²/c²) (since xA − xB can be either +l0 or −l0).
Thus v(tA − tB) = (±1 − √(1 − v²/c²)) l0, i.e. tA − tB = (l0/v)(1 − √(1 − v²/c²)), or tB − tA = (l0/v)(1 + √(1 − v²/c²)).
Teacher's Note: Length needs simultaneous end positions; correct for the time gap by the rod's own motion.
Exam Note: Subtract v(tA−tB) first, then divide by √(1−β²).
Question 353. The rod A′B′ moves with a constant velocity v relative to the rod AB (Fig. 1.91). Both rods have the same proper length l0 and at the ends of each of them clocks are mounted, which are synchronized pairwise: A with B and A′ with B′. Suppose the moment when the clock B′ gets opposite the clock A is taken for the beginning of the time count in the reference frames fixed to each of the rods. Determine:
(a) the readings of the clocks B and B′ at the moment when they are opposite each other;
(b) the same for the clocks A and A′.
Solution. At the instant the picture is taken the coordinates (t, x, y, z) of A, B, A′, B′ in the rest frame of AB are A: (0, 0, 0, 0), B: (0, l0, 0, 0), B′: (0, 0, 0, 0), A′: (0, −l0√(1 − v²/c²), 0, 0).
(a) In this frame the coordinates of B′ at other times are B′: (t, vt, 0, 0). So B′ is opposite to B at time t(B) = l0/v. In the frame in which B′, A′ are at rest the time corresponding to this is by Lorentz transformation t′(B′) = (1/√(1 − v²/c²))(l0/v − vl0/c²) = (l0/v)√(1 − v²/c²).
(b) Similarly in the rest frame of A, B, the coordinates of A′ at other times are A′: (t, −l0√(1 − v²/c²) + vt, 0, 0). A′ is opposite to A at time t(A) = (l0/v)√(1 − v²/c²). The corresponding time in the frame in which A′, B′ are at rest is t′(A′) = γ t(A) = l0/v.
Teacher's Note: Moving frame is contracted and clocks lag; Lorentz transformation converts event times between rod frames.
Exam Note: Convert event times by Lorentz transformation; compare B/B′ and A/A′.
Question 354. There are two groups of mutually synchronized clocks K and K′ moving relative to each other with a velocity v as shown in Fig. 1.92. The moment when the clock A′ gets opposite the clock A is taken for the beginning of the time count. Draw the approximate position of hands of all the clocks at this moment "in terms of the K clocks"; "in terms of the K′ clocks".
Solution. By Lorentz transformation t′ = (1/√(1 − v²/c²))(t − vx/c²). So at time t = 0, t′ = −(vx/c²)/√(1 − v²/c²). If x > 0, t′ < 0; if x < 0, t′ > 0, and we get the diagram below "in terms of the K clocks": all K clocks show the same time (hands up), while the K′ clocks show a time that is ahead towards the rear (x < 0) and behind towards the front (x > 0).
The situation in terms of the K′ clocks is reversed (all K′ clocks show the same time, and the K clocks are out of step in the opposite sense).
(Figure redrawn; positions of the hands are approximate, as in the book.)
Teacher's Note: Clocks synchronised in one frame are out of step in the other: t′ = −γvx/c².
Exam Note: Show hands rotated in proportion to x, opposite on each side.
Question 355. The reference frame K′ moves in the positive direction of the x axis of the frame K with a relative velocity V. Suppose that at the moment when the origins of coordinates O and O′ coincide, the clock readings at these points are equal to zero in both frames. Find the displacement velocity ẋ of the point (in the frame K) at which the readings of the clocks of both reference frames will be permanently identical. Demonstrate that ẋ < V.
Solution. Suppose x(t) is the locus of points in the frame K at which the readings of the clocks of both reference systems are permanently identical, then by Lorentz transformation t′ = (1/√(1 − V²/c²))(t − Vx(t)/c²) = t.
So x(t) = (c²/V)(1 − √(1 − V²/c²)) t, and differentiating, ẋ = (c²/V)(1 − √(1 − V²/c²)) = (c/β)(1 − √(1 − β²)), β = V/c.
Let β = tanh θ, 0 ≤ θ < ∞. Then ẋ = (c/tanh θ)(1 − √(1 − tanh²θ)) = c (cosh θ/sinh θ)(1 − 1/cosh θ) = c (cosh θ − 1)/sinh θ = c√((cosh θ − 1)/(cosh θ + 1)) = c tanh(θ/2) ≤ V (tanh θ is a monotonically increasing function of θ).
So ẋ < V for every V > 0 (for small V, ẋ ≈ V/2).
Teacher's Note: Set t′ = t, solve x(t); rapidity substitution shows ẋ = c tanh(θ/2) < c tanh θ = V.
Exam Note: Use β = tanhθ; half-angle identity gives the inequality.
Part 2 (Questions 356 to 370)
Question 356. At two points of the reference frame K two events occurred separated by a time interval Δt. Demonstrate that if these events obey the cause-and-effect relationship in the frame K (e.g. a shot fired and a bullet hitting a target), they obey that relationship in any other inertial reference frame K′.
Solution. We can take the coordinates of the two events to be A: (0, 0, 0, 0), B: (Δt, a, 0, 0). For B to be the effect and A to be the cause we must have Δt > |a|/c.
In the moving frame the coordinates of A and B become A: (0, 0, 0, 0), B: [γ(Δt − aV/c²), γ(a − VΔt), 0, 0] where γ = 1/√(1 − V²/c²).
Since (Δt′)² − a′²/c² = γ²[(Δt − aV/c²)² − (1/c²)(a − VΔt)²] = (Δt)² − a²/c² > 0, we must have Δt′ > |a′|/c.
The sign of Δt′ is also unchanged: Δt′ = γ(Δt − aV/c²) > γΔt(1 − V/c) > 0 because |a| < cΔt and V < c.
Teacher's Note: The interval Δt² − a²/c² is invariant; a signal slower than light stays so.
Exam Note: Show invariance of the interval; also sign of Δt′.
Question 357. The space-time diagram of Fig. 1.93 shows three events A, B, and C which occurred on the x axis of some inertial reference frame. Find:
(a) the time interval between the events A and B in the reference frame where the two events occurred at the same point;
(b) the distance between the points at which the events A and C occurred in the reference frame where these two events are simultaneous.
Solution. From the figure, A = (x = 2 m, ct = 1 m), B = (5 m, 6 m), C = (7 m, 4 m).
(a) The four-dimensional interval between A and B (assuming Δy = Δz = 0) is c²Δt² − Δx² = 5² − 3² = 16 (units m²). Therefore the time interval between these two events in the reference frame in which the events occurred at the same place is c(t′B − t′A) = √16 = 4 m, or t′B − t′A = 4/c = (4/3) × 10−8 s.
(b) The four dimensional interval between A and C is 3² − 5² = −16. So the distance between the two events in the frame in which they are simultaneous is 4 units = 4 m.
Teacher's Note: The interval c²Δt²−Δx² is frame-independent: read Δx, cΔt off the grid.
Exam Note: Read grid values carefully; use invariant interval.
Question 358. The velocity components of a particle moving in the xy plane of the reference frame K are equal to vx and vy. Find the velocity v′ of this particle in the frame K′ which moves with the velocity V relative to the frame K in the positive direction of its x axis.
Solution. By the velocity addition formula v′x = (vx − V)/(1 − Vvx/c²), v′y = vy√(1 − V²/c²)/(1 − vxV/c²) and
v′ = √(v′x² + v′y²) = √((vx − V)² + vy²(1 − V²/c²))/(1 − vxV/c²).
Teacher's Note: Transverse velocity also changes because dt′ changes; use both transformation laws.
Exam Note: Write v′x, v′y then combine in quadrature.
Question 359. Two particles move toward each other with velocities v1 = 0.50c and v2 = 0.75c relative to a laboratory frame of reference. Find:
(a) the approach velocity of the particles in the laboratory frame of reference;
(b) their relative velocity.
Solution. (a) By definition the velocity of approach is vapproach = dx1/dt − dx2/dt = v1 − (−v2) = v1 + v2 in the reference frame K. Numerically: 0.50c + 0.75c = 1.25c.
(b) The relative velocity is obtained by the transformation law vr = (v1 − (−v2))/(1 − v1(−v2)/c²) = (v1 + v2)/(1 + v1v2/c²) = 1.25c/1.375 = 0.91c.
Teacher's Note: Approach speed may exceed c (lab view); relative velocity never can.
Exam Note: Distinguish approach speed (1.25c) from relative speed (0.91c).
Question 360. Two rods having the same proper length l0 move lengthwise toward each other parallel to a common axis with the same velocity v relative to the laboratory frame of reference. What is the length of each rod in the reference frame fixed to the other rod?
Solution. The velocity of one of the rods in the reference frame fixed to the other rod is V = (v + v)/(1 + v²/c²) = 2v/(1 + β²).
The length of the moving rod in this frame is l = l0√(1 − 4v²/c²/(1 + β²)²) = l0(1 − β²)/(1 + β²), β = v/c.
Teacher's Note: Use relativistic addition for the relative speed, then contract: 1 − V²/c² is a perfect square.
Exam Note: V = 2v/(1+β²), then l = l₀√(1−V²/c²).
Question 361. Two relativistic particles move at right angles to each other in a laboratory frame of reference, one with the velocity v1 and the other with the velocity v2. Find their relative velocity.
Solution. The approach velocity is defined by vapproach = dr1/dt − dr2/dt = v1 − v2 in the laboratory frame. So vapproach = √(v1² + v2²).
On the other hand, the relative velocity can be obtained by using the velocity addition formula and has the components [−v1, v2√(1 − v1²/c²)], so vr = √(v1² + v2² − v1²v2²/c²).
Teacher's Note: Go to the rest frame of one particle: its perpendicular partner's velocity is reduced by √(1−v₁²/c²).
Exam Note: Do not confuse approach speed with relative speed.
Question 362. An unstable particle moves in the reference frame K′ along its y′ axis with a velocity v′. In its turn, the frame K′ moves relative to the frame K in the positive direction of its x axis with a velocity V. The x′ and x axes of the two reference frames coincide, the y′ and y axes are parallel. Find the distance which the particle traverses in the frame K, if its proper lifetime is equal to Δt0.
Solution. The components of the velocity of the unstable particle in the frame K are (V, v′√(1 − V²/c²), 0), so the speed relative to K is u = √(V² + v′² − v′²V²/c²).
The life time in this frame dilates to Δt0/√(1 − V²/c² − v′²/c² + v′²V²/c⁴) = Δt0/√((1 − V²/c²)(1 − v′²/c²)), and the distance traversed is
Δt0 √(V² + v′² − v′²V²/c²)/(√(1 − V²/c²) √(1 − v′²/c²)).
Teacher's Note: Speed in K combines both components; dilation factor uses that total speed.
Exam Note: Compute u, then distance = u × dilated lifetime.
Question 363. A particle moves in the frame K with a velocity v at an angle θ to the x axis. Find the corresponding angle in the frame K′ moving with a velocity V relative to the frame K in the positive direction of its x axis, if the x and x′ axes of the two frames coincide.
Solution. In the frame K′ the components of the velocity of the particle are v′x = (v cos θ − V)/(1 − vV cos θ/c²), v′y = v sin θ √(1 − V²/c²)/(1 − (vV/c²) cos θ).
Hence tan θ′ = v′y/v′x = v sin θ √(1 − V²/c²)/(v cos θ − V).
Teacher's Note: Aberration of direction: ratio of transformed components; the common denominator cancels.
Exam Note: Divide v′y by v′x; denominator cancels.
Question 364. The rod AB oriented parallel to the x′ axis of the reference frame K′ moves in this frame with a velocity v′ along its y′ axis. In its turn, the frame K′ moves with a velocity V relative to the frame K as shown in Fig. 1.94. Find the angle θ between the rod and the x axis in the frame K.
Solution. (Fig. 1.94 shows the rod AB parallel to x′, moving downward along y′ with velocity v′ while K′ moves along +x with velocity V; not redrawn.) In K′ the coordinates (t′, x′, y′, z′) of A and B are A: (t′, 0, −v′t′, 0); B: (t′, l, −v′t′, 0).
After performing Lorentz transformation to the frame K we get A: t = γt′, x = γVt′, y = −v′t′; B: t = γ(t′ + Vl/c²), x = γ(l + Vt′), y = −v′t′, z = 0.
By translating t′ → t′ − Vl/c², we can write the coordinates of B at the same time t = γt′ as x = γl(1 − V²/c²) + γVt′ = l√(1 − V²/c²) + γVt′, y = −v′(t′ − Vl/c²), z = 0.
Thus Δx = l√(1 − V²/c²), Δy = v′Vl/c². Hence tan θ = v′V/(c²√(1 − V²/c²)).
Corrected: the printed final line has a garbled root (√(1 − v′V/c²)); the correct result follows from Δy/Δx above.
Teacher's Note: Rod ends are marked at different K′ times, so simultaneity in K tilts the rod.
Exam Note: Relativity of simultaneity tilts the rod; tanθ = Δy/Δx.
Question 365. The frame K′ moves with a constant velocity V relative to the frame K. Find the acceleration w′ of a particle in the frame K′, if in the frame K this particle moves with a velocity v and acceleration w along a straight line
(a) in the direction of the vector V;
(b) perpendicular to the vector V.
Solution. (a) In K the velocities at time t and t + dt are respectively v and v + w dt along the x-axis which is parallel to the vector V. In the frame K′ moving with velocity V with respect to K, the velocities are respectively (v − V)/(1 − vV/c²) and (v + w dt − V)/(1 − (v + w dt)V/c²).
The latter velocity is written as (v − V)/(1 − vV/c²) + w dt (1 − V²/c²)/(1 − vV/c²)². Also by Lorentz transformation dt′ = (dt − V dx/c²)/√(1 − V²/c²) = dt (1 − vV/c²)/√(1 − V²/c²).
Thus the acceleration in the K′ frame is w′ = dv′/dt′ = w (1 − V²/c²)3/2/(1 − vV/c²)³.
(b) In the K frame the velocities of the particle at the time t and t + dt are respectively (0, v, 0) and (0, v + w dt, 0), where V is along the x-axis. In the K′ frame the velocities are (−V, v√(1 − V²/c²), 0) and (−V, (v + w dt)√(1 − V²/c²), 0) respectively.
Thus the acceleration w′ = w dt √(1 − V²/c²)/dt′ = w(1 − V²/c²) along the y-axis. We have used dt′ = dt/√(1 − V²/c²).
Teacher's Note: Acceleration transforms through both dv′ and dt′; parallel and perpendicular cases differ by powers.
Exam Note: Differentiate velocity law, divide by dt′; (a) power 3/2, (b) full factor.
Question 366. An imaginary space rocket launched from the Earth moves with an acceleration w′ = 10g which is the same in every instantaneous co-moving inertial reference frame. The boost stage lasted τ = 1.0 year of terrestrial time. Find how much (in per cent) does the rocket velocity differ from the velocity of light at the end of the boost stage. What distance does the rocket cover by that moment?
Solution. In the instantaneous rest frame v = V and w′ = w/(1 − V²/c²)3/2 (from 1.365a). So dv/(1 − v²/c²)3/2 = w′ dt, where w′ is constant by assumption. Thus integration gives
v = w′t/√(1 + (w′t/c)²). Integrating once again x = (c²/w′)(√(1 + (w′t/c)²) − 1).
Numerically: w′τ/c = (98.1 × 3.156 × 107)/(3.0 × 108) ≈ 10.3. Then (c − v)/c ≈ 1/(2(w′τ/c)²) ≈ 0.47%, and x = (c²/w′)(√(1 + 10.3²) − 1) ≈ 8.6 × 1015 m ≈ 0.91 light-year. (Numerical values worked out from the printed formulas.)
Teacher's Note: Constant proper acceleration gives hyperbolic motion; 1−v/c ≈ ½(c/w′t)² for large w′t/c.
Exam Note: Integrate twice; substitute w′τ/c ≈ 10.3 for numbers.
Question 367. From the conditions of the foregoing problem determine the boost time τ0 in the reference frame fixed to the rocket. Remember that this time is defined by the formula τ0 = ∫0τ √(1 − (v/c)²) dt, where dt is the time in the geocentric reference frame.
Solution. The boost time τ0 in the reference frame fixed to the rocket is related to the time τ elapsed on the earth by
τ0 = ∫0τ √(1 − v²/c²) dt = ∫0τ [1 − (w′t/c)²/(1 + (w′t/c)²)]1/2 dt = ∫0τ dt/√(1 + (w′t/c)²) = (c/w′) ∫0w′τ/c dξ/√(1 + ξ²) = (c/w′) ln[w′τ/c + √(1 + (w′τ/c)²)].
Numerically: τ0 = (3.0 × 108/98.1) × ln(10.3 + 10.4) ≈ 3.06 × 106 s × 3.03 ≈ 9.3 × 106 s ≈ 0.29 year. (Numerical value worked out from the printed formula.)
Teacher's Note: Proper time of the rocket is much shorter than Earth time; integral gives an inverse hyperbolic sine.
Exam Note: Substitute ξ = w′t/c; ∫dξ/√(1+ξ²) = asinh ξ.
Question 368. How many times does the relativistic mass of a particle whose velocity differs from the velocity of light by 0.010% exceed its rest mass?
Solution. m = m0/√(1 − β²). For β ≈ 1, m/m0 = 1/√(2(1 − β)) = 1/√(2η), where η = (c − v)/c = 1.0 × 10−4.
Numerically: m/m0 = 1/√(2 × 10−4) ≈ 71.
Teacher's Note: 1−β² = (1−β)(1+β) ≈ 2(1−β) near light speed; mass ratio is about 71.
Exam Note: Use 1−β² ≈ 2η, then 1/√(2η).
Question 369. The density of a stationary body is equal to ρ0. Find the velocity (relative to the body) of the reference frame in which the density of the body is η = 25% greater than ρ0.
Solution. We define the density ρ in the frame K in such a way that ρ dx dy dz is the rest mass dm0 of the element. That is ρ dx dy dz = ρ0 dx0 dy0 dz0, where ρ0 is the proper density, dx0, dy0, dz0 are the dimensions of the element in the rest frame K0. Now dy = dy0, dz = dz0, dx = dx0√(1 − v²/c²) if the frame K is moving with velocity v relative to the frame K0. Thus ρ = ρ0/√(1 − v²/c²).
Defining η by ρ = ρ0(1 + η) we get 1 + η = 1/√(1 − v²/c²), or v²/c² = 1 − 1/(1 + η)² = η(2 + η)/(1 + η)², or v = c√(η(2 + η))/(1 + η).
Numerically: η = 0.25: v = c√(0.25 × 2.25)/1.25 = 0.60c.
Teacher's Note: Only the length along motion contracts, so density rises by γ: 1+η = γ.
Exam Note: Set γ = 1.25; then β = 0.6.
Question 370. A proton moves with a momentum p = 10.0 GeV/c, where c is the velocity of light. How much (in per cent) does the proton velocity differ from the velocity of light?
Solution. We have m0v/√(1 − v²/c²) = p, or m0/√(1 − v²/c²) = √(m0² + p²/c²). Or 1 − v²/c² = m0²c²/(m0²c² + p²) = 1 − p²/(p² + m0²c²), or v = cp/√(p² + m0²c²) = c/√(1 + (m0c/p)²).
So (c − v)/c = [1 − (1 + (m0c/p)²)−1/2] × 100% ≈ (1/2)(m0c/p)² × 100%.
Numerically: m0c² = 0.938 GeV, m0c/p = 0.0938: (c − v)/c ≈ 0.5 × 0.0088 × 100% ≈ 0.44%.
Teacher's Note: For p ≫ m₀c, 1−v/c ≈ ½(m₀c/p)²; use proton rest energy 0.938 GeV.
Exam Note: Expand to ½(m₀c/p)²; answer 0.44%.
Part 3 (Questions 371 to 388)
Question 371. Find the velocity at which the relativistic momentum of a particle exceeds its Newtonian momentum η = 2 times.
Solution. By definition of η, m0v/√(1 − v²/c²) = η m0v, or 1 − v²/c² = 1/η², or v = c√(1 − 1/η²) = (c/η)√(η² − 1).
Numerically: η = 2: v = (√3/2)c = 0.87c.
Teacher's Note: Momentum ratio is simply γ; set γ = 2.
Exam Note: γ = η, so v = (c/η)√(η²−1).
Question 372. What work has to be performed in order to increase the velocity of a particle of rest mass m0 from 0.60c to 0.80c? Compare the result obtained with the value calculated from the classical formula.
Solution. The work done is equal to the change in kinetic energy which is different in the two cases. Classically i.e. in nonrelativistic mechanics, the change in kinetic energy is (1/2)m0c²((0.8)² − (0.6)²) = (1/2)m0c² × 0.28 = 0.14 m0c².
Relativistically: m0c²/√(1 − (0.8)²) − m0c²/√(1 − (0.6)²) = m0c²/0.6 − m0c²/0.8 = m0c²(1.666 − 1.250) = 0.416 m0c² = 0.42 m0c².
So the relativistic work is about three times the classical value.
Teacher's Note: Work equals change in total (relativistic) energy: ΔE = m₀c²(γ₂−γ₁).
Exam Note: Do both calculations; relativistic is 3 times classical.
Question 373. Find the velocity at which the kinetic energy of a particle equals its rest energy.
Solution. The total energy is then twice the rest energy: m0c²/√(1 − v²/c²) = 2m0c², or √(1 − v²/c²) = 1/2, or 1 − v²/c² = 1/4, or v/c = √3/2, i.e. v = c√3/2 ≈ 0.87c.
Teacher's Note: T = E − m₀c² = m₀c² means γ = 2.
Exam Note: Total energy = 2 × rest energy; γ = 2.
Question 374. At what values of the ratio of the kinetic energy to rest energy can the velocity of a particle be calculated from the classical formula with the relative error less than ε = 0.010?
Solution. Relativistically T/(m0c²) = 1/√(1 − β²) − 1 ≈ (1/2)β² + (3/8)β⁴. So βrel² ≈ 2T/(m0c²) − (3/4)(βrel²)² ≈ 2T/(m0c²) − (3/4)(2T/(m0c²))².
Thus βrel ≈ [2T/(m0c²) − 3T²/(m0²c⁴)]1/2 = √(2T/(m0c²)) (1 − (3/4) T/(m0c²)).
But classically βcl = √(2T/(m0c²)), so |βrel − βcl|/βcl = (3/4) T/(m0c²) = ε.
Hence if T/(m0c²) < 4ε/3 (= 0.013 for ε = 0.010) the velocity β is given by the classical formula with an error less than ε.
Teacher's Note: Expand γ for small β; the relative error in β is (3/4)T/m₀c².
Exam Note: Series expansion; condition T/m₀c² < 4ε/3 ≈ 0.013.
Question 375. Find how the momentum of a particle of rest mass m0 depends on its kinetic energy. Calculate the momentum of a proton whose kinetic energy equals 500 MeV.
Solution. From the formula E² = c²p² + m0²c⁴ or (m0c² + T)² = c²p² + m0²c⁴ we find T(2m0c² + T) = c²p², i.e. p = (1/c)√(T(2m0c² + T)).
Numerically: m0c² = 938 MeV, T = 500 MeV: p = √(500 × 2376)/c ≈ 1.09 GeV/c.
Teacher's Note: Combine E = T + m₀c² with E² = c²p² + m₀²c⁴.
Exam Note: Use p = √(T(T+2m₀c²))/c; proton gives 1.09 GeV/c.
Question 376. A beam of relativistic particles with kinetic energy T strikes against an absorbing target. The beam current equals I, the charge and rest mass of each particle are equal to e and m0 respectively. Find the pressure developed by the beam on the target surface, and the power liberated there.
Solution. Let the total force exerted by the beam on the target surface be F and the power liberated there be P. Then, using the result of the previous problem we see F = Np = (N/c)√(T(T + 2m0c²)) = (I/(ec))√(T(T + 2m0c²)), since I = Ne, N being the number of particles striking the target per second.
Also P = N(m0c²/√(1 − v²/c²) − m0c²) = (I/e)T.
These will be, respectively, equal to the pressure and power developed per unit area of the target if I is current density.
Teacher's Note: Absorbed beam: force = rate of momentum arrival; power = rate of kinetic energy arrival.
Exam Note: Use p from the previous result and N = I/e.
Question 377. A sphere moves with a relativistic velocity v through a gas whose unit volume contains n slowly moving particles, each of mass m. Find the pressure p exerted by the gas on a spherical surface element perpendicular to the velocity of the sphere, provided that the particles scatter elastically. Show that the pressure is the same both in the reference frame fixed to the sphere and in the reference frame fixed to the gas.
Solution. In the frame fixed to the sphere the momentum transferred to the elastically scattered particle is 2mv/√(1 − v²/c²). The density of the moving element is, from 1.369, n/√(1 − v²/c²), and the momentum transferred per unit time per unit area is
p = (2mv/√(1 − v²/c²)) · (n/√(1 − v²/c²)) · v = 2mnv²/(1 − v²/c²).
In the frame fixed to the gas, when the sphere hits a stationary particle, the latter recoils with a velocity (v + v)/(1 + v²/c²) = 2v/(1 + v²/c²). The momentum transferred is m·(2v/(1 + v²/c²))/√(1 − 4v²/c²/(1 + v²/c²)²) = 2mv/(1 − v²/c²) and the pressure is (2mv/(1 − v²/c²)) · n · v = 2mnv²/(1 − v²/c²), the same as before.
Teacher's Note: Pressure = momentum per hit × hit rate per area; time dilation and contraction cancel between frames.
Exam Note: Do both frames; both give 2mnv²/(1−β²).
Question 378. A particle of rest mass m0 starts moving at a moment t = 0 due to a constant force F. Find the time dependence of the particle's velocity and of the distance covered.
Solution. The equation of motion is d/dt (m0v/√(1 − v²/c²)) = F. Integrating, (v/c)/√(1 − v²/c²) = β/√(1 − β²) = Ft/(m0c), using v = 0 for t = 0.
β²/(1 − β²) = (Ft/(m0c))², or β² = (Ft)²/((Ft)² + (m0c)²), or v = Fct/√((m0c)² + (Ft)²).
Then x = ∫ Fct dt/√(F²t² + m0²c²) = (c/F)√(F²t² + m0²c²) + constant, or using x = 0 at t = 0, we get x = √(c²t² + (m0c²/F)²) − m0c²/F.
Teacher's Note: Constant force means momentum grows linearly: p = Ft; then v = pc²/E.
Exam Note: Integrate F = dp/dt first; v then x.
Question 379. A particle of rest mass m0 moves along the x axis of the frame K in accordance with the law x = √(a² + c²t²), where a is a constant, c is the velocity of light, and t is time. Find the force acting on the particle in this reference frame.
Solution. x = √(a² + c²t²), so ẋ = v = c²t/√(a² + c²t²), or v/√(1 − v²/c²) = c²t/a. Thus d/dt (m0v/√(1 − v²/c²)) = m0c²/a = F.
So the force is constant: F = m0c²/a.
Teacher's Note: Hyperbolic motion means constant force: p = m₀γv grows linearly with t.
Exam Note: Compute γv = c²t/a; differentiate.
Question 380. Proceeding from the fundamental equation of relativistic dynamics, find:
(a) under what circumstances the acceleration of a particle coincides in direction with the force F acting on it;
(b) the proportionality factors relating the force F and the acceleration w in the cases when F ⊥ v and F ∥ v, where v is the velocity of the particle.
Solution. F = d/dt (m0v/√(1 − v²/c²)) = m0 v̇/√(1 − v²/c²) + m0 (v·v̇)v/(c²(1 − v²/c²)3/2).
(a) The second term is along v, so w = v̇ is parallel to F only when F ⊥ v or F ∥ v.
(b) Thus for F ⊥ v (w ⊥ v): F⊥ = m0w/√(1 − β²); for F ∥ v (w ∥ v): F∥ = m0w/(1 − β²)3/2.
(Part (a) is stated here from the printed derivation; the book does not write it out explicitly.)
Teacher's Note: Transverse mass γm₀, longitudinal mass γ³m₀; force and acceleration are parallel only in these two cases.
Exam Note: Differentiate p = γm₀v; separate parallel and perpendicular parts.
Question 381. A relativistic particle with momentum p and total energy E moves along the x axis of the frame K. Demonstrate that in the frame K′ moving with a constant velocity V relative to the frame K in the positive direction of its axis x the momentum and the total energy of the given particle are defined by the formulas: p′x = (px − EV/c²)/√(1 − β²), E′ = (E − pxV)/√(1 − β²), where β = V/c.
Solution. By definition, E = m0c²/√(1 − v²/c²) = m0c³ dt/ds, px = m0vx/√(1 − v²/c²) = c m0 dx/ds, where ds² = c²dt² − dx² is the invariant interval (dy = dz = 0).
Thus, p′x = c m0 dx′/ds = c m0γ (dx − V dt)/ds = (px − VE/c²)/√(1 − V²/c²),
E′ = m0c³ dt′/ds = c³m0γ (dt − V dx/c²)/ds = (E − Vpx)/√(1 − V²/c²).
Teacher's Note: (E/c, p) transforms like (ct, x) because ds is invariant and m₀ is a constant.
Exam Note: Write E and p via ds; apply Lorentz transformation to dx, dt.
Question 382. The photon energy in the frame K is equal to ε. Making use of the transformation formulas cited in the foregoing problem, find the energy ε′ of this photon in the frame K′ moving with a velocity V relative to the frame K in the photon's motion direction. At what value of V is the energy of the photon equal to ε′ = ε/2?
Solution. For a photon moving in the x direction ε = cpx, py = pz = 0. In the moving frame, ε′ = (1/√(1 − β²))(ε − Vε/c) = ε√((1 − V/c)/(1 + V/c)).
Note that ε′ = ε/2 if (1 − β)/(1 + β) = 1/4, or β = 3/5, V = 3c/5.
Teacher's Note: Use E′ = γ(E − Vp) with p = ε/c: Doppler red shift for a receding observer.
Exam Note: Substitute p = ε/c; set factor = 1/2.
Question 383. Demonstrate that the quantity E² − p²c² for a particle is an invariant, i.e. it has the same magnitude in all inertial reference frames. What is the magnitude of this invariant?
Solution. As before E = m0c³ dt/ds, px = m0c dx/ds. Similarly py = m0c dy/ds, pz = m0c dz/ds.
Then E² − c²p² = E² − c²(px² + py² + pz²) = m0²c⁴ (c²dt² − dx² − dy² − dz²)/ds² = m0²c⁴ is invariant (ds² = c²dt² − dx² − dy² − dz²).
Teacher's Note: ds is invariant, and so is rest mass, hence E²−p²c² = m₀²c⁴ in all frames.
Exam Note: Express E and p through ds; the ratio equals 1.
Question 384. A neutron with kinetic energy T = 2m0c², where m0 is its rest mass, strikes another, stationary, neutron. Determine:
(a) the combined kinetic energy T̃ of both neutrons in the frame of their centre of inertia and the momentum p̃ of each neutron in that frame;
(b) the velocity of the centre of inertia of this system of particles.
Instruction. Make use of the invariant E² − p²c² remaining constant on transition from one inertial reference frame to another (E is the total energy of the system, p is its composite momentum).
Solution. (b) & (a) In the CM frame, the total momentum is zero. Thus V/c = cp1x/(E1 + E2) = √(T(T + 2m0c²))/(T + 2m0c²) = √(T/(T + 2m0c²)), where we have used the result of problem 375.
Then 1/√(1 − V²/c²) = 1/√(1 − T/(T + 2m0c²)) = √((T + 2m0c²)/(2m0c²)). Total energy in the CM frame is 2m0c²/√(1 − V²/c²) = 2m0c²√((T + 2m0c²)/(2m0c²)) = √(2m0c²(T + 2m0c²)) = T̃ + 2m0c².
So T̃ = 2m0c²(√(1 + T/(2m0c²)) − 1). Also 2√(c²p̃² + m0²c⁴) = √(2m0c²(T + 2m0c²)), 4c²p̃² = 2m0c²T, or p̃ = √(m0T/2).
Numerically: T = 2m0c²: V = c/√2 = 0.71c; T̃ = 2m0c²(√2 − 1) = 0.83 m0c²; p̃ = m0c. (Numerical values worked out from the printed formulas.)
Teacher's Note: In the CM frame total momentum is zero; the invariant E²−p²c² links lab and CM energies.
Exam Note: Use V = pc²/E and the invariant; substitute T = 2m₀c².
Question 385. A particle of rest mass m0 with kinetic energy T strikes a stationary particle of the same rest mass. Find the rest mass and the velocity of the compound particle formed as a result of the collision.
Solution. M0c² = √(E² − c²p²) = √((2m0c² + T)² − T(2m0c² + T)) = √(2m0c²(2m0c² + T)) = c√(2m0(2m0c² + T)), i.e. M0 = √(2m0(2m0 + T/c²)).
Also cp = √(T(T + 2m0c²)), v = c²p/E = c√(T/(T + 2m0c²)).
Teacher's Note: Rest mass of the product from the invariant √(E²−p²c²); it exceeds 2m₀.
Exam Note: Total E = T+2m₀c², p from 375; velocity = pc²/E.
Question 386. How high must be the kinetic energy of a proton striking another, stationary, proton for their combined kinetic energy in the frame of the centre of inertia to be equal to the total kinetic energy of two protons moving toward each other with individual kinetic energies T = 25.0 GeV?
Solution. Let T′ = kinetic energy of a proton striking another stationary particle of the same rest mass. Then the combined kinetic energy in the CM frame = 2m0c²(√(1 + T′/(2m0c²)) − 1) = 2T, so (T/(m0c²) + 1)² = 1 + T′/(2m0c²).
T′/(2m0c²) = T(2m0c² + T)/(m0²c⁴), i.e. T′ = 2T(T + 2m0c²)/(m0c²).
Numerically: m0c² = 0.938 GeV, T = 25.0 GeV: T′ = 2 × 25.0 × 26.88/0.938 ≈ 1.4 × 103 GeV ≈ 1.4 TeV. (Numerical value worked out from the printed formula.)
Teacher's Note: Fixed-target needs far more energy than a collider for the same CM energy.
Exam Note: Equate CM kinetic energies; T′ = 2T(T+2m₀c²)/m₀c².
Question 387. A stationary particle of rest mass m0 disintegrates into three particles with rest masses m1, m2, and m3. Find the maximum total energy that, for example, the particle m1 may possess.
Solution. We have E1 + E2 + E3 = m0c², p1 + p2 + p3 = 0. Hence (m0c² − E1)² − c²p1² = (E2 + E3)² − (p2 + p3)²c².
The L.H.S. = (m0² + m1²)c⁴ − 2m0c²E1. The R.H.S. is an invariant. We can evaluate it in any frame. Choose the CM frame of the particles 2 and 3. In this frame R.H.S. = (E′2 + E′3)² ≥ (m2 + m3)²c⁴
or 2m0c²E1 ≤ {m0² + m1² − (m2 + m3)²}c⁴, or E1 ≤ (m0² + m1² − (m2 + m3)²)c²/(2m0).
Teacher's Note: Maximum when particles 2 and 3 move together as one body of mass m₂+m₃.
Exam Note: Use the invariant (E₂+E₃)²−(p₂+p₃)²c² ≥ (m₂+m₃)²c⁴.
Question 388. A relativistic rocket emits a gas jet with non-relativistic velocity u constant relative to the rocket. Find how the velocity v of the rocket depends on its rest mass m if the initial rest mass of the rocket equals m0.
Solution. The velocity of ejected gases is u relative to the rocket. In an earth centred frame it is (v − u)/(1 − vu/c²) in the direction of the rocket. The momentum conservation equation then reads (m + dm)(v + dv) + ((v − u)/(1 − uv/c²))(−dm) = mv, or m dv − [(v − u)/(1 − uv/c²) − v] dm = 0.
Here −dm is the mass of the ejected gases, so m dv − ((−u + uv²/c²)/(1 − uv/c²)) dm = 0, or m dv + u(1 − v²/c²) dm = 0 (neglecting uv/c², since u is non-relativistic).
Integrating (β = v/c): ∫ dβ/(1 − β²) + (u/c) ∫ dm/m = 0, i.e. (1/2) ln((1 + β)/(1 − β)) + (u/c) ln m = constant. The constant = (u/c) ln m0 since β = 0 initially.
Corrected: the printed text omits the factor 1/2 in ∫dβ/(1 − β²) = (1/2) ln((1 + β)/(1 − β)) and so gives the exponent u/c; the correct exponent is 2u/c (checked by numerical integration).
Thus (1 − β)/(1 + β) = (m/m0)2u/c, or β = (1 − (m/m0)2u/c)/(1 + (m/m0)2u/c), i.e. v = cβ.
Teacher's Note: Rocket equation relativistically: dv′ = −u dm/m in the instantaneous rest frame; rapidity adds linearly.
Exam Note: Integrate carefully: ∫dβ/(1−β²) has a factor ½; exponent 2u/c.
Download IE Irodov Solutions for JEE Math PDF
Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 8 Relativistic Mechanics
Explore reliable mathematical solutions for IE Irodov Solutions Chapter 8 Relativistic Mechanics tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with IE Irodov Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.