Step-by-Step IE Irodov Solutions for JEE Physics Chapter 09 Equation Of The Gas State Processes
Review structured textbook solutions for JEE Physics Chapter 09 Equation Of The Gas State Processes prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 09 Equation Of The Gas State Processes Textbook Solutions PDF
View or download the dedicated Chapter 09 Equation Of The Gas State Processes solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Equation Of The Gas State Processes - Questions 1 to 25
Equation Of The Gas State Processes
Question 1. A vessel of volume V = 30 l contains ideal gas at the temperature 0°C. After a portion of the gas has been let out, the pressure in the vessel decreased by Δp = 0.78 atm (the temperature remaining constant). Find the mass of the released gas. The gas density under the normal conditions ρ = 1.3 g/l.
Solution.
Let m1 and m2 be the masses of the gas in the vessel before and after the gas is released. Hence the mass of gas released is Δm = m1 − m2.
From the ideal gas equation: p1V = m1(R/M)T0 and p2V = m2(R/M)T0, since V and T are the same before and after.
So (p1 − p2)V = (m1 − m2)(R/M)T0 = Δm(R/M)T0, or Δm = (p1 − p2)VM/(RT0) = ΔpVM/(RT0) (1)
We also know p = ρ(R/M)T, so M/(RT0) = ρ/p0 (2) (where p0 = standard atmospheric pressure and T0 = 273 K).
From Eqs. (1) and (2): Δm = ρV(Δp/p0) = 1.3 × 30 × (0.78/1) = 30 g
Teacher's Note: Mass released = density at normal conditions × volume × (Δp/p₀), valid at constant temperature.
Exam Note: Use ρ at normal conditions; keep Δp/p₀ dimensionless.
Question 2. Two identical vessels are connected by a tube with a valve letting the gas pass from one vessel into the other if the pressure difference Δp ≥ 1.10 atm. Initially there was a vacuum in one vessel while the other contained ideal gas at a temperature t1 = 27°C and pressure p1 = 1.00 atm. Then both vessels were heated to a temperature t2 = 107°C. Up to what value will the pressure in the first vessel (which had vacuum initially) increase?
Solution.
Let ν1 be the number of moles enclosed. Then p1V = ν1RT1.
When heated, some gas passes into the evacuated vessel till the pressure difference becomes Δp. Let p′1 and p′2 be the pressures on the two sides of the valve. Then p′1V = ν′1RT2 and p′2V = ν′2RT2 = (ν1 − ν′1)RT2.
So p′2V = (p1V/(RT1) − p′1V/(RT2))RT2, i.e. p′2 = (p1/T1 − p′1/T2)T2.
But p′1 − p′2 = Δp, so p′2 = (p1/T1 − (p′2 + Δp)/T2)T2 = p1T2/T1 − p′2 − Δp.
Or p′2 = ½(p1T2/T1 − Δp) = 0.08 atm
Teacher's Note: Mole conservation across both vessels at T₂ plus the valve condition p₁′ − p₂′ = Δp gives p₂′.
Exam Note: Heating alone gives 1.27 atm; valve opens since it exceeds 1.10.
Question 3. A vessel of volume V = 20 l contains a mixture of hydrogen and helium at a temperature t = 20°C and pressure p = 2.0 atm. The mass of the mixture is equal to m = 5.0 g. Find the ratio of the mass of hydrogen to that of helium in the given mixture.
Solution.
Let the mixture contain ν1 and ν2 moles of H2 and He respectively. If molecular weights of H2 and He are M1 and M2, the respective masses are m1 = ν1M1 and m2 = ν2M2.
Therefore the total mass is m = m1 + m2 or m = ν1M1 + ν2M2 (1)
Also, if ν is the total number of moles of the mixture, ν = ν1 + ν2 (2)
Solving (1) and (2): ν1 = (νM2 − m)/(M2 − M1), ν2 = (m − νM1)/(M2 − M1).
Therefore m1 = M1(νM2 − m)/(M2 − M1) and m2 = M2(m − νM1)/(M2 − M1), or m1/m2 = M1(νM2 − m)/(M2(m − νM1)).
In terms of the effective molecular weight of the mixture, M = m/ν = mRT/(pV), we get m1/m2 = (M1/M2)·(M2 − M)/(M − M1) = (1 − M/M2)/(M/M1 − 1).
Using the data, M = 3.0 g and m1/m2 = 0.50
Teacher's Note: Find the mixture molar mass M = mRT/pV, then apply the weighted-average (mixing) relation for the two gases.
Exam Note: Compute M first; small errors in M change the ratio strongly.
Question 4. A vessel contains a mixture of nitrogen (m1 = 7.0 g) and carbon dioxide (m2 = 11 g) at a temperature T = 290 K and pressure p0 = 1.0 atm. Find the density of this mixture, assuming the gases to be ideal.
Solution.
For the mixture of N2 and CO2 (regarded as ideal gases, their mixture too behaves like an ideal gas) pV = νRT, so p0V = νRT, where ν is the total number of moles present and V is the volume of the vessel.
If ν1 and ν2 are the moles of N2 and CO2, then ν = ν1 + ν2, with ν1 = m1/M1 and ν2 = m2/M2.
Therefore the density of the mixture is ρ = (m1 + m2)/V = (m1 + m2)/(νRT/p0) = (p0/RT)·(m1 + m2)/(ν1 + ν2) = p0(m1 + m2)M1M2/(RT(m1M2 + m2M1)) = 1.5 kg/m3 on substitution.
Teacher's Note: Total moles = 0.25 + 0.25 = 0.5; mixture molar mass 36 g/mol; then ρ = pM/RT.
Exam Note: Add moles; use M(N₂) = 28, M(CO₂) = 44.
Question 5. A vessel of volume V = 7.5 l contains a mixture of ideal gases at a temperature T = 300 K: ν1 = 0.10 mole of oxygen, ν2 = 0.20 mole of nitrogen, and ν3 = 0.30 mole of carbon dioxide. Assuming the gases to be ideal, find: (a) the pressure of the mixture; (b) the mean molar mass M of the given mixture which enters its equation of state pV = (m/M)RT, where m is the mass of the mixture.
Solution.
(a) The mixture contains ν1, ν2 and ν3 moles of O2, N2 and CO2 respectively. The total number of moles is ν = ν1 + ν2 + ν3. For the mixture pV = νRT, so p = νRT/V = (ν1 + ν2 + ν3)RT/V = 1.968 atm on substitution.
(b) Masses: m1 = ν1M1, m2 = ν2M2, m3 = ν3M3. So the mass of the mixture is m = ν1M1 + ν2M2 + ν3M3.
Molecular mass of the mixture: M = (mass of the mixture)/(total number of moles) = (ν1M1 + ν2M2 + ν3M3)/(ν1 + ν2 + ν3) = 36.7 g/mol on substitution.
Teacher's Note: Partial pressures add (Dalton), so p = (Σν)RT/V; mean M = total mass / total moles.
Exam Note: Convert 7.5 l to m³ or use R = 0.082 l·atm/(mol·K).
Question 6. A vertical cylinder closed from both ends is equipped with an easily moving piston dividing the volume into two parts, each containing one mole of air. In equilibrium at T0 = 300 K the volume of the upper part is η = 4.0 times greater than that of the lower part. At what temperature will the ratio of these volumes be equal to η′ = 3.0?
Solution.
Let p1 and p2 be the pressures in the upper and lower parts at temperature T0. At equilibrium of the piston: p1S + mg = p2S, or p1 + mg/S = p2 (m is the mass of the piston).
But p1 = RT0/(ηV0) (V0 is the initial volume of the lower part). So RT0/(ηV0) + mg/S = RT0/V0, or mg/S = (RT0/V0)(1 − 1/η) (1)
Let T′ be the sought temperature and V′ the volume of the lower part then; the upper part is η′V′. Hence mg/S = (RT′/V′)(1 − 1/η′) (2)
From (1) and (2): (RT0/V0)(1 − 1/η) = (RT′/V′)(1 − 1/η′), or T′ = T0(1 − 1/η)V′/(V0(1 − 1/η′)) (3)
The total volume is constant: V0(1 + η) = V′(1 + η′), or V′ = V0(1 + η)/(1 + η′).
Putting V′ in Eq. (3): T′ = T0(η2 − 1)η′/((η′2 − 1)η) = 300 × 15 × 3/(8 × 4) ≈ 0.42 kK (about 420 K).
Teacher's Note: Piston weight per area mg/S is fixed; equate it at both states and use constant total volume.
Exam Note: Final T′ ≈ 422 K; state units (book gives 0.42 kK).
Question 7. A vessel of volume V is evacuated by means of a piston air pump. One piston stroke captures the volume ΔV. How many strokes are needed to reduce the pressure in the vessel η times? The process is assumed to be isothermal, and the gas ideal.
Solution.
Let ρ1 be the density after the first stroke. The mass remains constant: Vρ0 = (V + ΔV)ρ1, or ρ1 = Vρ0/(V + ΔV).
Similarly, if ρ2 is the density after the second stroke: Vρ1 = (V + ΔV)ρ2, or ρ2 = (V/(V + ΔV))ρ1 = (V/(V + ΔV))2ρ0.
In this way after the n-th stroke ρn = (V/(V + ΔV))nρ0. Since pressure ∝ density (temperature constant), pn = (V/(V + ΔV))np0.
It is required that pn/p0 = 1/η. So 1/η = (V/(V + ΔV))n, or η = ((V + ΔV)/V)n.
Hence n = ln η / ln(1 + ΔV/V)
Teacher's Note: Each stroke multiplies pressure by V/(V+ΔV); set the product equal to 1/η and take logs.
Exam Note: Round n up to a whole number of strokes.
Question 8. Find the pressure of air in a vessel being evacuated as a function of evacuation time t. The vessel volume is V, the initial pressure is p0. The process is assumed to be isothermal, and the evacuation rate equal to C and independent of pressure. Note. The evacuation rate is the gas volume being evacuated per unit time, with that volume being measured under the gas pressure attained by that moment.
Solution.
From the ideal gas equation p = (m/M)(RT/V), so dp/dt = (RT/(MV))(dm/dt) (1)
In each stroke, a volume v of gas is ejected. In the case of continuous ejection, if m(t) is the mass of gas in the vessel at time t, then m(t + Δt) is the mass at time t + Δt, where Δt is the time in which volume v of the gas has come out. The rate of evacuation is therefore C = v/Δt = −(V/m(t + Δt))·(m(t + Δt) − m(t))/Δt.
In the limit Δt → 0, C = −(V/m)(dm/dt) (2)
From (1) and (2): dp/dt = −(C/V)(mRT/(MV)) = −(C/V)p, or dp/p = −(C/V)dt.
Integrating: ∫p0p dp/p = −(C/V)∫0t dt, or ln(p/p0) = −Ct/V.
Thus p = p0 e−Ct/V
Teacher's Note: Rate C = volume removed per time at current pressure gives dp/dt = −(C/V)p, an exponential decay.
Exam Note: Quote p = p₀e^(−Ct/V); show the dm/dt = −(C/V)m step.
Question 9. A chamber of volume V = 87 l is evacuated by a pump whose evacuation rate (see Note to the foregoing problem) equals C = 10 l/s. How soon will the pressure in the chamber decrease by η = 1000 times?
Solution.
Let ρ be the instantaneous density; then the instantaneous mass is Vρ. In a short interval dt the volume increases by C dt. So Vρ = (V + C dt)(ρ + dρ) (the mass remains constant in a short interval dt).
So dρ/ρ = −(C/V)dt. Since pressure ∝ density, dp/p = −(C/V)dt.
Or ∫p1p2 (−dp/p) = (C/V)t, or t = (V/C) ln(p1/p2) = (V/C) ln η = (87/10) ln 1000 ≈ 1.0 min
Teacher's Note: Same exponential law as Q8: t = (V/C) ln η with C in l/s.
Exam Note: Check: 8.7 s × 6.91 ≈ 60 s.
Question 10. A smooth vertical tube having two different sections is open from both ends and equipped with two pistons of different areas (Fig. 2.1). Each piston slides within a respective tube section. One mole of ideal gas is enclosed between the pistons tied with a non-stretchable thread. The cross-sectional area of the upper piston is ΔS = 10 cm2 greater than that of the lower one. The combined mass of the two pistons is equal to m = 5.0 kg. The outside air pressure is p0 = 1.0 atm. By how many kelvins must the gas between the pistons be heated to shift the pistons through l = 5.0 cm?
Solution.
The system consists of one mole of gas confined in the smooth vertical tube. Let m1 and m2 be the masses of the upper and lower pistons and S1 and S2 their respective areas. Let T be the tension in the thread.
For the lower piston: pS2 + m2g = p0S2 + T, or T = (p − p0)S2 + m2g (1)
Similarly for the upper piston: p0S1 + T + m1g = pS1, or T = (p − p0)S1 − m1g (2)
From (1) and (2): (p − p0)(S1 − S2) = (m1 + m2)g, or (p − p0)ΔS = mg.
So p = mg/ΔS + p0 = constant.
From the gas law pV = νRT, so pΔV = νRΔT (because p is constant). So (p0 + mg/ΔS)ΔS·l = RΔT.
Hence ΔT = (1/R)(p0ΔS + mg)l = 0.9 K
Teacher's Note: Pistons joined by a thread: net force balance fixes p, so heating is isobaric with ΔV = ΔS·l.
Exam Note: Use SI units; ΔT ≈ 0.90 K.
Question 11. Find the maximum attainable temperature of ideal gas in each of the following processes: (a) p = p0 − αV2; (b) p = p0e−βV, where p0, α and β are positive constants, and V is the volume of one mole of gas.
Solution.
(a) p = p0 − αV2 = p0 − α(RT/p)2 (as V = RT/p for one mole of gas).
Thus T = (1/(R√α)) p√(p0 − p) = (1/(R√α))√(p0p2 − p3) (1)
For Tmax, d(p0p2 − p3)/dp must be zero, which yields p = (2/3)p0 (2)
Hence Tmax = (1/(R√α))·(2/3)p0√(p0 − (2/3)p0) = (2/3)(p0/R)√(p0/(3α))
(b) p = p0e−βV = p0e−βRT/p. So (βRT/p) = ln(p0/p), and T = (p/(βR)) ln(p0/p) (1)
For Tmax the condition is dT/dp = 0, which yields p = p0/e. Using this value of p in Eq. (1): Tmax = p0/(eβR)
Teacher's Note: Express T as a function of one variable (p), set dT/dp = 0, and substitute back.
Exam Note: Eliminate V using V = RT/p before differentiating.
Question 12. Find the minimum attainable pressure of ideal gas in the process T = T0 + αV2, where T0 and α are positive constants, and V is the volume of one mole of gas. Draw the approximate p vs V plot of this process.
Solution.
T = T0 + αV2 = T0 + αR2T2/p2 (as V = RT/p for one mole of gas).
So p = √α·RT(T − T0)−1/2 (1)
For pmin, dp/dT = 0, which gives T = 2T0 (2)
From (1) and (2): pmin = √α R·2T0(2T0 − T0)−1/2 = 2R√(αT0)
Plot (added to complete the question; the printed solution gives no sketch): since p = RT/V = R(T0/V + αV), p falls like a hyperbola for small V, reaches the minimum 2R√(αT0) at V = √(T0/α), then rises almost linearly with V.
Teacher's Note: Minimise p(T) with T eliminated; the plot follows from p = R(T₀/V + αV).
Exam Note: Show T = 2T₀ at minimum; sketch has a single minimum.
Question 13. A tall cylindrical vessel with gaseous nitrogen is located in a uniform gravitational field in which the free-fall acceleration is equal to g. The temperature of the nitrogen varies along the height h so that its density is the same throughout the volume. Find the temperature gradient dT/dh.
Solution.
Consider a thin layer at height h and thickness dh. Let p and p + dp be the pressures on the two sides of the layer. The mass of the layer is Sρ dh. Equating the vertical downward force to the upward force acting on the layer (pS upward; (p + dp)S and the weight Sρ dh·g downward):
dp/dh = −ρg (1)
But p = (ρ/M)RT, so with ρ constant dp = (ρR/M)dT, or −(ρR/M)dT = ρg dh.
So dT/dh = −gM/R = −34 K/km
That means the temperature of the gas drops by 34 K at a height of 1 km above the bottom.
Teacher's Note: Hydrostatic balance dp/dh = −ρg combined with p = ρRT/M at constant ρ.
Exam Note: Use M = 28 g/mol for nitrogen; answer about −34 K/km.
Question 14. Suppose the pressure p and the density ρ of air are related as p/ρn = const regardless of height (n is a constant here). Find the corresponding temperature gradient.
Solution.
We have dp/dh = −ρg (see Q. 13) (1)
But from p = Cρn (C a constant), dp/dρ = Cnρn−1 (2)
From the gas law p = ρ(R/M)T, so using (2): Cρn = ρ(R/M)T, or T = (M/R)Cρn−1. Thus dT/dρ = (M/R)C(n − 1)ρn−2.
But dT/dh = (dT/dρ)(dρ/dp)(dp/dh). So dT/dh = (M/R)C(n − 1)ρn−2·(1/(Cnρn−1))·(−ρg) = −Mg(n − 1)/(nR)
Teacher's Note: Chain rule: dT/dh = (dT/dρ)(dρ/dp)(dp/dh) with p = Cρⁿ and p = ρRT/M.
Exam Note: For n = 1 the gradient is zero (isothermal); say so.
Question 15. Let us assume that air is under standard conditions close to the Earth's surface. Presuming that the temperature and the molar mass of air are independent of height, find the air pressure at the height 5.0 km over the surface and in a mine at the depth 5.0 km below the surface.
Solution.
We have dp = −ρg dh and from the gas law ρ = (M/RT)p, so dp/p = −(Mg/RT)dh.
Integrating, ∫p0p dp/p = −(Mg/RT)∫0h dh, or ln(p/p0) = −Mgh/(RT), i.e. p = p0e−Mgh/RT (where p0 is the pressure at the surface of the Earth).
Under standard conditions p0 = 1 atm, T = 273 K.
Pressure at a height of 5 km: p = 1 × e−28×9.81×5000/(8314×273) = 0.5 atm.
Pressure in a mine at a depth of 5 km: p = 1 × e−28×9.81×(−5000)/(8314×273) = 2 atm.
(Rounded values as printed; the exponent is 0.605, so more precisely about 0.55 atm and 1.8 atm.)
Teacher's Note: Barometric formula p = p₀e^(−Mgh/RT); use negative h for a mine.
Exam Note: Put h negative below the surface; pressure increases.
Question 16. Assuming the temperature and the molar mass of air, as well as the free-fall acceleration, to be independent of the height, find the difference in heights at which the air densities at the temperature 0°C differ (a) e times; (b) by η = 1.0%.
Solution.
We have dp = −ρg dh but from the gas law p = (ρ/M)RT. Thus dp = (dρ/M)RT at constant temperature. So dρ/ρ = −(gM/RT)dh.
Integrating within limits: ln(ρ/ρ0) = −(gM/RT)h. So ρ = ρ0e−Mgh/RT and h = −(RT/Mg) ln(ρ/ρ0).
(a) Given T = 273 K, ρ0/ρ = e. Thus h = −(RT/Mg) ln e−1 = RT/Mg = 8 km.
(b) T = 273 K and (ρ0 − ρ)/ρ0 = 0.01, or ρ/ρ0 = 0.99. Thus h = −(RT/Mg) ln 0.99 = 0.08 km.
Corrected: the book prints 0.09 km; redoing the numbers, RT/Mg = 7.98 km and −ln 0.99 = 0.01005, so h = 0.080 km = 80 m.
Teacher's Note: Density falls exponentially with height; scale height RT/Mg ≈ 8 km at 0 °C.
Exam Note: Small change: h ≈ η × 8 km.
Question 17. An ideal gas of molar mass M is contained in a tall vertical cylindrical vessel whose base area is S and height h. The temperature of the gas is T, its pressure on the bottom base is p0. Assuming the temperature and the free-fall acceleration g to be independent of the height, find the mass of gas in the vessel.
Solution.
From the barometric formula, p = p0e−Mgh/RT. And from the gas law ρ = pM/(RT). So, at constant temperature, ρ = (Mp0/RT)e−Mgh/RT = ρ0e−Mgh/RT (1)
Eq. (1) shows that the density varies with height in the same manner as the pressure. Consider the mass element of the gas contained in the column: dm = ρ(S dh) = (Mp0/RT)e−Mgh/RTS dh.
Hence the sought mass is m = (Mp0S/RT)∫0h e−Mgh/RT dh = (p0S/g)(1 − e−Mgh/RT)
Teacher's Note: Integrate dm = ρS dh over the column with the barometric density.
Exam Note: As h → ∞, m → p₀S/g: the weight equals base force.
Question 18. An ideal gas of molar mass M is contained in a very tall vertical cylindrical vessel in the uniform gravitational field in which the free-fall acceleration equals g. Assuming the gas temperature to be the same and equal to T, find the height at which the centre of gravity of the gas is located.
Solution.
As the gravitational field is constant, the centre of gravity and the centre of mass coincide. The location of the C.M.: hc = ∫0∞ h dm / ∫0∞ dm = ∫0∞ hρ dh / ∫0∞ ρ dh.
But from the barometric formula and gas law ρ = ρ0e−Mgh/RT. So hc = ∫0∞ h e−Mgh/RT dh / ∫0∞ e−Mgh/RT dh = RT/Mg
Teacher's Note: Mass-weighted mean height with exponential density equals the scale height RT/Mg.
Exam Note: Use ∫h e^(−ah)dh = 1/a² and ∫e^(−ah)dh = 1/a.
Question 19. An ideal gas of molar mass M is located in the uniform gravitational field in which the free-fall acceleration is equal to g. Find the gas pressure as a function of height h, if p = p0 at h = 0, and the temperature varies with height as (a) T = T0(1 − ah); (b) T = T0(1 + ah), where a is a positive constant.
Solution.
(a) The variation of pressure with height is dp = −ρg dh. From the gas law ρ = pM/(RT). From these two: dp = −(pMg/RT)dh (1)
Or dp/p = −Mg dh/(RT0(1 − ah)). Integrating, ∫p0p dp/p = −(Mg/RT0)∫0h dh/(1 − ah), we get ln(p/p0) = ln(1 − ah)Mg/aRT0.
Hence p = p0(1 − ah)Mg/aRT0. Obviously h < 1/a.
(b) Proceed up to Eq. (1) of part (a), then put T = T0(1 + ah) and proceed in the same fashion to get p = p0/(1 + ah)Mg/aRT0
Teacher's Note: Use dp/p = −Mg dh/(RT(h)) and integrate with the given linear T(h).
Exam Note: State validity: in (a) ah must stay below 1.
Question 20. A horizontal cylinder closed from one end is rotated with a constant angular velocity ω about a vertical axis passing through the open end of the cylinder. The outside air pressure is equal to p0, the temperature to T, and the molar mass of air to M. Find the air pressure as a function of the distance r from the rotation axis. The molar mass is assumed to be independent of r.
Solution.
Consider a mass element of the gas (thin layer) in the cylinder at a distance r from its open end as shown in the figure. Using Newton's second law for the element, Fn = mwn: (p + dp)S − pS = (ρS dr)ω2r
or dp = ρω2r dr = (pM/RT)ω2r dr. So dp/p = (Mω2/RT) r dr, or ∫p0p dp/p = (Mω2/RT)∫0r r dr.
Thus ln(p/p0) = Mω2r2/(2RT), or p = p0eMω²r²/2RT
Teacher's Note: Net radial force on a gas layer provides centripetal acceleration: dp = ρω²r dr.
Exam Note: Pressure rises outward; mention the exponential with r².
Question 21. Under what pressure will carbon dioxide have the density ρ = 500 g/l at the temperature T = 300 K? Carry out the calculations both for an ideal and for a Van der Waals gas.
Solution.
For an ideal gas p = (ρ/M)RT, so p = 0.082 × 300 × (500/44) atm = 279.5 atm.
For a Van der Waals gas (p + ν2a/V2)(V − νb) = νRT, where V = νVM. So p = νRT/(V − νb) − aν2/V2 = (m RT/M)/(V − mb/M) − am2/(V2M2), or p = ρRT/(M − ρb) − aρ2/M2 = 79.2 atm.
Teacher's Note: Ideal: p = ρRT/M. Van der Waals: use molar volume M/ρ in p = RT/(V−b) − a/V².
Exam Note: Use CO₂ a, b from the table; units l·atm.
Question 22. One mole of nitrogen is contained in a vessel of volume V = 1.00 l. Find: (a) the temperature of the nitrogen at which the pressure can be calculated from an ideal gas law with an error η = 10% (as compared with the pressure calculated from the Van der Waals equation of state); (b) the gas pressure at this temperature.
Solution.
(a) p = [RT/(VM − b) − a/VM2](1 + η) = RT/VM (the pressure is less for a Van der Waals gas than for an ideal gas).
Or a(1 + η)/VM2 = RT[−1/VM + (1 + η)/(VM − b)] = RT(ηVM + b)/(VM(VM − b)).
Or T = a(1 + η)(VM − b)/(RVM(ηVM + b)) (here VM is the molar volume) = 1.35 × 1.1 × (1 − 0.039)/(0.082 × 0.139) ≈ 125 K.
(b) The corresponding pressure is p = RT/(VM − b) − a/VM2 = a(1 + η)/(VM(ηVM + b)) − a/VM2 = (a/VM2)(VM − b)/(ηVM + b) = (1.35/1)(0.961/0.139) ≈ 9.3 atm.
Teacher's Note: Set p_ideal = 1.1 × p_vdW and solve for T; then substitute back to get p.
Exam Note: Use N₂: a = 1.35 l²·atm/mol², b = 0.039 l/mol.
Question 23. One mole of a certain gas is contained in a vessel of volume V = 0.250 l. At a temperature T1 = 300 K the gas pressure is p1 = 90 atm, and at a temperature T2 = 350 K the pressure is p2 = 110 atm. Find the Van der Waals parameters for this gas.
Solution.
p1 = RT1/(V − b) − a/V2, p2 = RT2/(V − b) − a/V2.
So p2 − p1 = R(T2 − T1)/(V − b), or V − b = R(T2 − T1)/(p2 − p1), i.e. b = V − R(T2 − T1)/(p2 − p1).
Also p1 = T1(p2 − p1)/(T2 − T1) − a/V2, so a/V2 = T1(p2 − p1)/(T2 − T1) − p1 = (T1p2 − p1T2)/(T2 − T1), or a = V2(T1p2 − p1T2)/(T2 − T1).
Using T1 = 300 K, p1 = 90 atm, T2 = 350 K, p2 = 110 atm, V = 0.250 l: a = 1.87 atm·l2/mol2, b = 0.045 l/mol.
Teacher's Note: Subtract the two vdW equations to get b, then back-substitute to get a.
Exam Note: Keep units consistent: R = 0.082 l·atm/(mol·K).
Question 24. Find the isothermal compressibility κ of a Van der Waals gas as a function of volume V at temperature T. Note. By definition κ = −(1/V)(∂V/∂p).
Solution.
p = RT/(V − b) − a/V2, so −V(∂p/∂V)T = RTV/(V − b)2 − 2a/V2.
Or κ = −(1/V)(∂V/∂p)T = [RTV3 − 2a(V − b)2]−1·V2(V − b)2, i.e. κ = V2(V − b)2 / [RTV3 − 2a(V − b)2]
(The square on (V − b) in the numerator is the correct form, following from the inverse of the bracket above; it is hard to read in the scan.)
Teacher's Note: κ = 1/(−V ∂p/∂V); differentiate the vdW pressure at constant T and invert.
Exam Note: For a = b = 0 this reduces to V/RT.
Question 25. Making use of the result obtained in the foregoing problem, find at what temperature the isothermal compressibility κ of a Van der Waals gas is greater than that of an ideal gas. Examine the case when the molar volume is much greater than the parameter b.
Solution.
For an ideal gas κ0 = V/(RT).
Now κ = ((V − b)2/(RTV)){1 − 2a(V − b)2/(RTV3)}−1 = κ0(1 − b/V)2{1 − (2a/RTV)(1 − b/V)2}−1 ≈ κ0{1 − 2b/V + 2a/(RTV)}, to leading order in a, b.
Now κ > κ0 if 2a/(RTV) > 2b/V, or T < a/(bR).
If a, b do not vary much with temperature, then the effect at high temperature is clearly determined by b and its effect is repulsive, so the compressibility is less.
Teacher's Note: Expand κ for V ≫ b: attraction (a) raises compressibility, size (b) lowers it.
Exam Note: Condition 2a/RTV > 2b/V gives T < a/(bR); state it.
Download IE Irodov Solutions for JEE Math PDF
Complete Math Solutions for IE Irodov Solutions Chapter 9 Equation Of The Gas State Processes
Explore reliable mathematical solutions for IE Irodov Solutions Chapter 9 Equation Of The Gas State Processes tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for JEE Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.