IE Irodov Solutions for JEE Physics: Chapter 27 Photometry And Geometrical Optics
Explore reliable textbook solutions for Chapter 27 Photometry And Geometrical Optics tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Physics Solutions: Chapter 27 Photometry And Geometrical Optics
View or download the dedicated Chapter 27 Photometry And Geometrical Optics solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Photometry and Geometrical Optics - Questions 32 to 63
Photometry and Geometrical Optics (Part - 2)
Question 32. An object is placed in front of convex surface of a glass plano-convex lens of thickness d = 9.0 cm. The image of that object is formed on the plane surface of the lens serving as a screen. Find:
(a) the transverse magnification if the curvature radius of the lens's convex surface is R = 2.5 cm;
(b) the image illuminance if the luminance of the object is L = 7700 cd/m² and the entrance aperture diameter of the lens is D = 5.0 mm; losses of light are negligible.
Solution. (a) The image of a source placed at a distance s from the pole of the convex surface of a plano-convex lens of thickness d is formed on the plane face (figure: object O on the axis, rays refracted at the curved surface N, plane face at distance d behind it). Applying the refraction formula for a spherical surface (n2 = n, n1 = 1):
n/s′ − 1/s = (n − 1)/R, with s′ = d: n/d − 1/s = (n − 1)/R, so 1/s = n/d − (n − 1)/R and s′/s = s′{n/d − (n − 1)/R}.
But here the optical path of the light corresponding to the distance v in the medium is v/n, so the magnification is
β = s′/(ns) = (s′/n){n/d − (n − 1)/R} = (d/n){n/d − (n − 1)/R} = 1 − d(n − 1)/(nR).
Substituting the values (n = 1.5), β = −0.20.
(b) If the transverse area of the object is A (assumed small), the area of the image is β²A. We assume that πD²/4 > A. Then the light falling on the lens is LA·(πD²/4)/s², from the definition of luminance (cos θ ≈ 1 if D² << s² and dΩ = (πD²/4)/s²). Then the illuminance of the image is
E = [LA(πD²/4)/s²] / (β²A) = L n² πD²/(4d²).
Substitution gives E = 42 lx.
Teacher's Note: Magnification at a single refracting surface needs the n factor; illuminance scales with n² and the aperture.
Exam Note: Show the β formula, then E = Ln²πD²/4d². Write units (lx).
Question 33. Find the optical power and the focal lengths
(a) of a thin glass lens in liquid with refractive index n0 = 1.7 if its optical power in air is Φ0 = −5.0 D;
(b) of a thin symmetrical biconvex glass lens, with air on one side and water on the other, if the optical power of that lens in air is Φ0 = +10 D.
Solution. (a) The optical power of a thin lens of refractive index n in a medium of refractive index n0 is Φ = (n − n0)(1/R1 − 1/R2) (A).
In air: Φ0 = (n − 1)(1/R1 − 1/R2) (1). In the liquid: Φ = (n − n0)(1/R1 − 1/R2) (2).
Thus from (1) and (2): Φ = [(n − n0)/(n − 1)]·Φ0 = 2 D (n = 1.5 for glass).
The second focal length is f′ = n′/Φ, where n′ is the refractive index of the medium in which the lens is placed: f′ = n0/Φ = 85 cm.
(b) For a biconvex lens in air, from (A): Φ0 = (n − 1)(1/R − 1/(−R)) = 2(n − 1)/R (1), where R is the radius of each curved surface.
The optical power of a spherical refracting surface is Φ = (n′ − n)/R (B).
For the rear surface (air and glass): Φa = (n − 1)/R. For the front surface (water and glass): Φl = (n − n0)/R (3).
Hence the optical power of the system Φ = Φa + Φl = (n − 1)/R + (n − n0)/R = (2n − n0 − 1)/R (4).
From (1) and (4): Φ/Φ0 = (2n − n0 − 1)/(2(n − 1)), so Φ = [(2n − n0 − 1)/(2(n − 1))]·Φ0 ≈ 6.7 D.
Focal length in air f = 1/Φ = 15 cm, and focal length in water = n0/Φ = 20 cm for n0 = 4/3.
Teacher's Note: Power of a thin lens scales with (n − n0); focal length on the far side is n′/Φ, not 1/Φ.
Exam Note: State n = 1.5; give Φ in D, f in cm.
Question 34. By means of plotting find: (a) the path of a ray of light beyond thin converging and diverging lenses (Fig. 5.7, where OO′ is the optical axis, F and F′ are the front and rear focal points);
(b) the position of a thin lens and its focal points if the position of the optical axis OO′ and the positions of the conjugate points P, P′ (see Fig. 5.5) are known; the media on both sides of the lenses are identical;
(c) the path of ray 2 beyond the converging and diverging lenses (Fig. 5.8) if the path of ray 1 and the positions of the lens and of its optical axis OO′ are all known; the media on both sides of the lenses are identical.
(The figures 5.5, 5.7 and 5.8 are not reproduced here; each shows a lens, its axis OO′ and the given rays or points.)
Solution. (a) The front focus F is the position of the object (virtual or real) for which the image is formed at infinity. The rear focus F′ is the position of the image (virtual or real) of an object at infinity. Construction (Fig. 5.7): draw a line through the optical centre of the lens parallel to the given ray; this line passes undeviated. Through F′ draw a line perpendicular to the axis (the rear focal plane); the refracted ray passes through the point where the undeviated line meets that plane (for the diverging lens the refracted ray appears to come from the corresponding point on the focal plane, shown dashed). This construction ensures that the second of the equations (5.1g) is obeyed.
(b) Join P and P′ by a straight line; the point where it meets the axis OO′ is the optical centre, and the lens is the line through it perpendicular to the axis. Then draw a ray from P parallel to the axis up to the lens; the line joining the point where it meets the lens to P′ cuts the axis at the focal point. (For a convex lens, P′ is a real image; for a concave lens, P′ is virtual and the construction is done with dashed lines.)
(c) Clearly the important case is when rays (1) and (2) are not symmetric about the principal axis, otherwise the figure can be completed by reflection in the principal axis. Knowing one path, we know the path of all rays connecting the two points. For a different object we proceed as shown in the figure: use the fact that a ray incident at a given height above the optic centre suffers a definite deviation. The concave lens can be discussed similarly.
Teacher's Note: Central ray is undeviated; every parallel bundle meets in the focal plane.
Exam Note: Draw neat ray diagrams with arrows; label F, F′, optic centre.
Question 35. A thin converging lens with focal length f = 25 cm projects the image of an object on a screen removed from the lens by a distance l = 5.0 m. Then the screen was drawn closer to the lens by a distance Δl = 18 cm. By what distance should the object be shifted for its image to become sharp again?
Solution. Since the image is formed on the screen, it is real, so for a converging lens the object is on the incident side. Let s1 and s2 be the magnitudes of the object distance in the first and second case respectively. We have the lens formula 1/s′ − 1/s = 1/f (1).
In the first case, 1/(+l) − 1/(−s1) = 1/f, or s1 = fl/(l − f) = 26.31 cm.
Similarly in the second case, 1/(l − Δl) − 1/(−s2) = 1/f, or s2 = (l − Δl)f/((l − Δl) − f) = 26.36 cm.
Thus the sought distance Δx = s2 − s1 = 0.5 mm ≈ Δl·f²/(l − f)² (the object is moved away from the lens).
Teacher's Note: Shift of the screen needs the object to move by about (f/(l−f))² times Δl.
Exam Note: Give direction (away from lens) and 0.5 mm. Use real-is-positive convention.
Question 36. A source of light is located at a distance l = 90 cm from a screen. A thin converging lens provides the sharp image of the source when placed between the source of light and the screen at two positions. Determine the focal length of the lens if (a) the distance between the two positions of the lens is Δl = 30 cm; (b) the transverse dimensions of the image at one position of the lens are η = 4.0 times greater than those at the other position.
Solution. The distance between the object and the image is l. Let x = distance between the object and the lens. Then, since the image is real, in our convention u = −x, v = l − x, so 1/x + 1/(l − x) = 1/f, or x(l − x) = lf, or x² − xl + lf = 0. Solving, we get the roots x = ½[l ± √(l² − 4lf)]. (We must have l > 4f for real roots.)
(a) If the distance between the two positions of the lens is Δl, then clearly Δl = x2 − x1 = difference between roots = √(l² − 4lf), so f = (l² − Δl²)/(4l) = 20 cm.
(b) The two roots are conjugate in the sense that if one gives the object distance the other gives the corresponding image distance (in both cases). Thus the magnifications are −[l + √(l² − 4lf)]/[l − √(l² − 4lf)] (enlarged) and −[l − √(l² − 4lf)]/[l + √(l² − 4lf)] (diminished).
The ratio of these magnifications being η we have
[l + √(l² − 4lf)]/[l − √(l² − 4lf)] = √η, or √(l² − 4lf)/l = (√η − 1)/(√η + 1),
or 1 − 4f/l = ((√η − 1)/(√η + 1))² = 1 − 4√η/(1 + √η)².
Hence f = l√η/(1 + √η)² = 20 cm.
Teacher's Note: Two lens positions are conjugate (displacement method); a quadratic in x gives both.
Exam Note: Note l > 4f; answer 20 cm in both parts.
Question 37. A thin converging lens is placed between an object and a screen whose positions are fixed. There are two positions of the lens at which the sharp image of the object is formed on the screen. Find the transverse dimension of the object if at one position of the lens the image dimension equals h′ = 2.0 mm and at the other, h″ = 4.5 mm.
Solution. We know from the previous problem that the two magnifications are reciprocals of each other (β′β″ = 1). If h is the size of the object then h′ = β′h and h″ = β″h. Hence h = √(h′h″) = √(2.0 × 4.5) = 3.0 mm.
Teacher's Note: Conjugate lens positions give reciprocal magnifications, so object size is the geometric mean.
Exam Note: Quote β′β″ = 1 from problem 36; numerical value 3.0 mm.
Question 38. A thin converging lens with aperture ratio D : f = 1 : 3.5 (D is the lens diameter, f is its focal length) provides the image of a sufficiently distant object on a photographic plate. The object luminance is L = 260 cd/m². The losses of light in the lens amount to α = 0.10. Find the illuminance of the image.
Solution. Refer to problem 32 (b). If A is the area of the object, then provided the angular diameter of the object at the lens is much smaller than other relevant angles like D/f, we calculate the light falling on the lens as LA·πD²/(4s²), where s² is the object distance squared. If β is the transverse magnification (β = s′/s), then the area of the image is β²A. Hence the illuminance of the image (also taking account of the light lost in the lens) is
E = (1 − α)LA·(πD²/4s²)·1/(β²A) = (1 − α)πD²L/(4f²).
Since s′ = f for a distant object, substitution gives E = 15 lx.
Teacher's Note: For distant objects image distance equals f, so E depends only on L and the aperture ratio D/f.
Exam Note: Include (1 − α) loss factor; E = 15 lx.
Question 39. How does the luminance of a real image depend on diameter D of a thin converging lens if that image is observed (a) directly; (b) on a white screen backscattering according to Lambert's law?
Solution. (a) If s = object distance, s′ = image distance, L = luminance of the source, ΔS = area of the source assumed to be a plane surface held normal to the principal axis, then for the flux ΔΦ incident on the lens we find
ΔΦ = ∫L ΔS cos θ dΩ = L ΔS ∫0α cos θ·2π sin θ dθ = L ΔS π sin²α ≈ L ΔS πD²/(4s²).
Here we are assuming D << s, and ignoring the variation of L since α is small. Then if L′ is the luminance of the image, and ΔS′ = (s′/s)²ΔS is the area of the image, then similarly
L′ ΔS′ (πD²/4s′²) = L ΔS (πD²/4s²), or L′ = L irrespective of D.
(b) In this case the image is on a white screen that is a Lambert source. If its luminance is L0 its luminosity will be πL0, and πL0(s′²/s²)ΔS = L ΔS πD²/(4s²), or L0 ∝ D², since s′ depends on f and s but not on D.
Teacher's Note: Direct viewing: luminance is conserved; on a Lambertian screen it follows the collected flux, so ∝ D².
Exam Note: Answer both: (a) independent of D, (b) proportional to D².
Question 40. There are two thin symmetrical lenses: one is converging, with refractive index n1 = 1.70, and the other is diverging with refractive index n2 = 1.51. Both lenses have the same curvature radius of their surfaces equal to R = 10 cm. The lenses were put close together and submerged into water. What is the focal length of this system in water?
Solution. The focal length of the converging lens, when submerged in water of refractive index n0:
1/f1 = (n1/n0 − 1)(1/R − 1/(−R)) = 2(n1 − n0)/(n0R) (1).
Similarly, for the diverging lens in water: 1/f2 = (n2/n0 − 1)(1/(−R) − 1/R) = −2(n2 − n0)/(n0R) (2).
Now, when they are put together in water, 1/f = 1/f1 + 1/f2 = 2(n1 − n0)/(n0R) − 2(n2 − n0)/(n0R) = 2(n1 − n2)/(n0R).
Or, f = −n0R/(2(n1 − n2)) ≈ −35 cm (n0 = 4/3; the system is diverging).
Teacher's Note: Powers add for close lenses; water index cancels from the sum except as a divisor.
Exam Note: Keep the minus sign: system is diverging, f ≈ −35 cm.
Photometry and Geometrical Optics (Part - 3)
Question 41. Determine the focal length of a concave spherical mirror which is manufactured in the form of a thin symmetric biconvex glass lens one of whose surfaces is silvered. The curvature radius of the lens surface is R = 40 cm.
Solution. C is the centre of curvature of the silvered surface and O is the effective centre of the equivalent mirror in the sense that an object at O forms a coincident image (figure: a ray from C refracts at the front surface, reflects at the silvered back surface and returns through the same point). From the figure, using the formula for refraction at a spherical surface, we have
n/(−R) − 1/(2f) = (n − 1)/R, or f = −R/(2(2n − 1)) (in our convention f is negative).
Substitution (n = 1.5) gives f = −10 cm.
Teacher's Note: Equivalent mirror power = two refractions plus one reflection: 2(n−1)/R + 2n/R.
Exam Note: Give the minus sign (concave mirror); f = −10 cm.
Question 42. Figure 5.9 illustrates an aligned system consisting of three thin lenses (optical powers +10.0 D, −10.0 D and +10.0 D, placed 5.0 cm apart). The system is located in air. Determine:
(a) the position of the point of convergence of a parallel ray incoming from the left after passing through the system;
(b) the distance between the first lens and a point lying on the axis to the left of the system, at which that point and its image are located symmetrically with respect to the lens system.
Solution. (a) The path of a ray as it passes through the lens system is shown in the figure (a parallel ray bends towards the axis at lens 1, bends slightly away at lens 2 and converges again at lens 3). The focal length of all the three lenses is f = 1/10 m = 10 cm, neglecting their signs.
Applying the lens formula for the first lens, considering a ray coming from infinity, 1/s′ − 1/∞ = 1/f, or s′ = f = 10 cm, and so the position of the image is 5 cm to the right of the second lens when only the first one is present. But the ray again gets refracted while passing through the second lens, so
1/s′ − 1/5 = 1/f = 1/(−10), or s′ = 10 cm,
which is now 5 cm to the left of the third lens (i.e. 5 cm beyond it, as a virtual object), so for this lens
1/s″ − 1/5 = 1/10, or 1/s″ = 3/10, so s″ = 10/3 = 3.33 cm from the last lens.
(b) This means that if the object is x cm to the left of the first lens on the axis OO′, then the image is x cm to the right of the third (last) lens. Call the lenses 1, 2, 3 from the left, let O be the object, O1 its image by the first lens, O2 the image of O1 by the second lens, and O3 the image of O2 by the third lens.
O1 and O2 must be symmetrically located with respect to the lens L2, and since this lens is concave, O1 must be at a distance 2|f2| to the right of L2 and O2 must be 2|f2| to the left of L2. One can check that this satisfies the lens equation for the third lens L3:
u = −(2|f2| + 5) = −25 cm, s′ = x, f3 = 10 cm.
Hence 1/x + 1/25 = 1/10, so x = 16.67 cm.
Teacher's Note: Track each image as the next lens's object; a virtual object lies beyond the lens.
Exam Note: Stage-wise lens formula with signs; (a) 3.33 cm.
Question 43. A Galilean telescope of 10-fold magnification has the length of 45 cm when adjusted to infinity. Determine:
(a) the focal lengths of the telescope's objective and ocular;
(b) by what distance the ocular should be displaced to adjust the telescope to the distance of 50 m.
Solution. (a) The angular magnification of a Galilean telescope in normal adjustment is Γ = fo/fe, or 10 = fo/fe, i.e. fo = 10 fe (1) (magnitudes; the ocular is diverging).
The length of the telescope in this case is l = fo − fe = 45 cm (given). So, using (1), we get fe = 5 cm and fo = 50 cm.
(b) Using the lens formula for the objective with the object 50 m away: 1/s′o + 1/so = 1/fo, i.e. s′o = sofo/(so − fo) = 50.5 cm (so = 5000 cm in magnitude).
From the figure it is clear that s′o = l′ + fe, where l′ is the new tube length, or l′ = s′o − fe = 50.5 − 5 = 45.5 cm.
So the displacement of the ocular is Δl = l′ − l = 45.5 − 45 = 0.5 cm (away from the objective).
Teacher's Note: Galilean tube length is fo − fe; a nearer object pushes the objective's image beyond fo.
Exam Note: Show both f values and Δl = 0.5 cm outward.
Question 44. Find the magnification of a Keplerian telescope adjusted to infinity if the mounting of the objective has a diameter D and the image of that mounting formed by the telescope's ocular has a diameter d.
Solution. In the Keplerian telescope, in normal adjustment, the distance between the objective and eyepiece is fo + fe. The image of the mounting produced by the eyepiece is formed at a distance s′ to the right where 1/s′ − 1/s = 1/fe. But s = −(fo + fe), so
1/s′ = 1/fe − 1/(fo + fe) = fo/(fe(fo + fe)).
The linear magnification produced by the eyepiece of the mounting is, in magnitude, |β| = |s′/s| = fe/fo.
This equals d/D according to the problem, so Γ = fo/fe = D/d.
Teacher's Note: The exit pupil is the image of the objective mount; its size ratio gives Γ.
Exam Note: Final result Γ = D/d; show |β| = fe/fo first.
Question 45. On passing through a telescope a flux of light increases its intensity η = 4.0·104 times. Find the angular dimension of a distant object if its image formed by that telescope has an angular dimension ψ′ = 2.0°.
Solution. It is clear from the figure (a parallel beam passes through objective and eyepiece and emerges narrower) that a parallel beam of light, originally of intensity I0, has on emerging from the telescope an intensity I = I0(fo/fe)², because it is concentrated over a section whose diameter is fe/fo of the diameter of the cross section of the incident beam.
Thus η = (fo/fe)², so Γ = fo/fe = √η.
Now Γ = tan ψ′/tan ψ ≈ ψ′/ψ.
Hence ψ = ψ′/√η = 2.0°/200 = 0.6′ on substitution.
Teacher's Note: Beam width shrinks by 1/Γ, so intensity rises by Γ²; hence Γ = √η.
Exam Note: √η = 200; convert 0.01° to 0.6′.
Question 46. A Keplerian telescope with magnification Γ = 15 was submerged into water which filled up the inside of the telescope. To make the system work as a telescope again within the former dimensions, the objective was replaced. What has the magnification of the telescope become equal to? The refractive index of the glass of which the ocular is made is equal to n = 1.50.
Solution. When a glass lens is immersed in water its focal length increases approximately four times. We check this as follows: in air 1/fa = (n − 1)(1/R1 − 1/R2); in water 1/fw = (n/n0 − 1)(1/R1 − 1/R2) = [(n/n0 − 1)/(n − 1)]·(1/fa) = [(n − n0)/(n0(n − 1))]·(1/fa).
Now back to the problem. Originally in air Γ = fo/fe = 15, so l = fo + fe = fe(Γ + 1).
In water, f′e = [n0(n − 1)/(n − n0)]·fe, and the focal length of the replaced objective is given by the condition f′o + f′e = l = (Γ + 1)fe, or f′o = (Γ + 1)fe − f′e.
Hence Γ′ = f′o/f′e = (Γ + 1)(n − n0)/(n0(n − 1)) − 1.
Substitution gives (n = 1.5, n0 = 1.33), Γ′ = 3.09.
Teacher's Note: Water stretches the ocular's focal length; tube length is fixed, so the new objective must be shorter.
Exam Note: Use n0 = 1.33; answer Γ′ ≈ 3.1.
Question 47. At what magnification Γ of a telescope with a diameter of the objective D = 6.0 cm is the illuminance of the image of an object on the retina not less than without the telescope? The pupil diameter is assumed to be equal to d0 = 3.0 mm. The losses of light in the telescope are negligible.
Solution. If L is the luminance of the object, A is its area, s = distance of the object, then the light falling on the objective is LπD²A/(4s²).
The area of the image formed by the telescope (assuming that the image coincides with the object) is Γ²A, and the area of the final image on the retina is (f/s)²Γ²A, where f = focal length of the eye lens. Thus the illuminance of the image on the retina (when the object is observed through the telescope) is
[LπD²A/(4s²)] / [(f/s)²Γ²A] = LπD²/(4f²Γ²).
When the object is viewed directly, the illuminance is similarly Lπd0²/(4f²).
We want LπD²/(4f²Γ²) ≥ Lπd0²/(4f²), so Γ ≤ D/d0 = 20 on substitution of the values.
Teacher's Note: Telescope helps only while its exit pupil is not smaller than the eye pupil.
Exam Note: State the inequality Γ ≤ D/d0 = 20, not equality.
Question 48. The optical powers of the objective and the ocular of a microscope are equal to 100 and 20 D respectively. The microscope magnification is equal to 50. What will the magnification of the microscope be when the distance between the objective and the ocular is increased by 2.0 cm?
Solution. Obviously fo = 1 cm and fe = 5 cm. Now, we know that the magnification of a microscope for distinct vision is Γ = (s′o/fo − 1)(D/fe), where D = 25 cm.
Or 50 = (s′o/1 − 1)(25/5), or s′o = 11 cm.
Since the distance between the objective and the ocular has increased by 2 cm, it will cause the increase of tube length by 2 cm, so s′o = 11 + 2 = 13 cm.
And hence Γ′ = (s′o/fo − 1)(D/fe) = (13 − 1)(5) = 60.
Teacher's Note: Microscope magnification grows with tube length through the objective's image distance.
Exam Note: Convert powers to f first (1 cm, 5 cm); answer 60.
Question 49. A microscope has a numerical aperture sin α = 0.12, where α is the aperture angle subtended by the entrance pupil of the microscope. Assuming the diameter of an eye's pupil to be equal to d0 = 4.0 mm, determine the microscope magnification at which
(a) the diameter of the beam of light coming from the microscope is equal to the diameter of the eye's pupil;
(b) the illuminance of the image on the retina is independent of magnification (consider the case when the beam of light passing through the system "microscope-eye" is bounded by the mounting of the objective).
Solution. It is implied in the problem that the final image of the object is at infinity (otherwise light coming out of the eyepiece will not have a definite diameter).
(a) We see (figure) that s′o·2β = |so|·2α, then β = (|so|/s′o)α. Then, from the figure, d = 2feβ = 2feα/(s′o/|so|).
But when the final image is at infinity, the magnification in a microscope is given by Γ = (s′o/|so|)(l/fe) (l = least distance of distinct vision), so d = 2lα/Γ. So d = d0 when Γ = Γ0 = 2lα/d0 = 15 on putting the values (l = 25 cm).
(b) If Γ is the magnification produced by the microscope, then the area of the image produced on the retina (when we observe an object through the microscope) is Γ²(f/u)²A, where u = distance of the image produced by the microscope from the eye lens, f = focal length of the eye lens and A = area of the object. If Φ = luminous flux reaching the objective from the object and d = d0 so that the entire flux is admitted into the eye, then the illuminance of the final image on the retina = Φ/[Γ²(f/u)²A].
But if d ≥ d0, then only a fraction (d0/d)² of light is admitted into the eye and the illuminance becomes
(Φ/(A(f/u)²Γ²))(d0/d)² = Φd0²/(A(f/u)²(2lα)²),
independent of Γ. The condition for this is then d ≥ d0, or Γ ≤ Γ0 = 15.
Teacher's Note: Exit-beam diameter d = 2lα/Γ; compare it with the pupil.
Exam Note: Use l = 25 cm; (a) 15, (b) Γ ≤ 15.
Question 50. Find the positions of the principal planes, the focal and nodal points of a thin biconvex symmetric glass lens with curvature radius of its surfaces equal to R = 7.50 cm. There is air on one side of the lens and water on the other.
Solution. The primary and secondary focal lengths of a thick lens are given as f = −(n/Φ)[1 − (d/n′)Φ2] and f′ = +(n″/Φ)[1 − (d/n′)Φ1], where Φ is the lens power, n, n′ and n″ are the refractive indices of the first medium, the lens material and the second medium beyond the lens; Φ1 and Φ2 are the powers of the first and second spherical surface of the lens.
Here n = 1 (air), n′ = n (glass) and n″ = n0 (water). For a thin lens d ≈ 0, so f = −1/Φ and f′ = +n0/Φ (1).
Now the power of a thin lens is Φ = Φ1 + Φ2, where Φ1 = (n − 1)/R and Φ2 = (n0 − n)/(−R), so Φ = (2n − n0 − 1)/R (2).
From (1) and (2), with n = 1.5 and n0 = 1.33: f = −R/(2n − n0 − 1) = −11.2 cm and f′ = n0R/(2n − n0 − 1) = +14.9 cm.
Both principal planes coincide with the lens (thin lens). Since the distance between the primary principal point and the primary nodal point is x = f′(n″ − n)/n″ = (n0/Φ)(n0 − 1)/n0 = (n0 − 1)/Φ = n0/Φ − 1/Φ = f′ + f, in this case x = 3.7 cm. (The nodal points are therefore displaced by 3.7 cm from the lens, towards the water side.)
Teacher's Note: Different media either side shift the nodal points away from the principal points by f + f′.
Exam Note: f = −11.2 cm, f′ = 14.9 cm, shift 3.7 cm.
Question 52. An optical system is located in air. Let OO′ be its optical axis, F and F′ are the front and rear focal points, H and H′ are the front and rear principal planes, P and P′ are the conjugate points. By means of plotting find:
(a) the positions F′ and H′ (Fig. 5.11a);
(b) the position of the point S′ conjugate to the point S (Fig. 5.11b);
(c) the positions F, F′, and H′ (Fig. 5.11c, where the path of the ray of light is shown before and after passing through the system).
(Fig. 5.11 is not reproduced; (a) gives F, P and P′, (b) gives H, P, P′ and S, (c) gives H and one ray before and after the system.)
Solution. (a) Draw P′X parallel to the axis OO′ and let PF intersect it at X. That determines the principal plane H (the perpendicular from X to the axis). As the medium on both sides of the system is the same, the principal points coincide with the nodal points. Draw a ray through P′ parallel to PH; that determines H′. Draw a ray PX′ parallel to the axis and join P′X′. That gives F′.
(b) We let H stand for the principal point (on the axis). Determine H′ by drawing a ray P′H′ passing through P′ and parallel to PH. One ray (conjugate to SH) can be obtained from this. To get the other ray one needs to know F or F′. This is easy because P and F are known. Finally we get S′ (the intersection of the two rays).
(c) From the incident ray we determine Q. A line parallel to OO′ through Q determines Q′ and hence H′. H and H′ are then also the nodal points. A ray parallel to the incident ray through H will emerge parallel to it itself through H′. That determines F′. Similarly a ray parallel to the emergent ray through H determines F.
(Each part is illustrated by a ray diagram in the book; they are described in words above.)
Teacher's Note: In air the principal and nodal points coincide, so a ray through H leaves H′ parallel to itself.
Exam Note: Draw rays with arrows and mark H, H′, F, F′ clearly.
Question 53. Suppose F and F′ are the front and rear focal points of an optical system, and H and H′ are its front and rear principal points. By means of plotting find the position of the image S′ of the point S for the following relative positions of the points S, F, F′, H, and H′: (a) FSHH′F′; (b) HSF′FH′; (c) H′SF′FH; (d) F′H′SHF.
Solution. Here we do not assume that the media on the two sides of the system are the same.
In each case use two rays from S: (i) a ray from S parallel to the axis, which meets the rear principal plane H′ at the height at which it entered the front plane H and then passes through the rear focal point F′ (or appears to come from it); (ii) a ray from S directed towards the front focal point F (or appearing to come from F), which meets the front principal plane H and then leaves the rear plane H′ parallel to the axis. The point where the two emergent rays (or their backward extensions) intersect is the image S′. The four constructions for (a), (b), (c) and (d) are shown in the book's figure; the principal planes H and H′ are drawn as vertical lines in the order given in each case.
Teacher's Note: A ray crosses from plane H to H′ at the same height; parallel rays go through the focal point.
Exam Note: Use two standard rays; mark S′ where they (or extensions) meet.
Question 54. A telephoto lens consists of two thin lenses, the front converging lens and the rear diverging lens with optical powers Φ1 = +10 D and Φ2 = −10 D. Find:
(a) the focal length and the positions of principal planes of that system if the lenses are separated by a distance d = 4.0 cm;
(b) the distance d between the lenses at which the ratio of a focal length f of the system to a distance l between the converging lens and the rear principal focal point is the highest. What is this ratio equal to?
Solution. (a) The optical power of the combination of two lenses is Φ = Φ1 + Φ2 − dΦ1Φ2. On putting the values, Φ = 4 D, or f = 1/Φ = 25 cm.
The position of the primary principal plane with respect to the vertex of the converging lens is x = dΦ2/Φ, of magnitude 10 cm (in front of the lens, i.e. on its left, since Φ2 < 0).
Similarly, the position of the secondary principal plane with respect to the vertex of the diverging lens is x′ = −dΦ1/Φ = −10 cm, i.e. 10 cm to the left of it.
(b) The distance between the rear principal focal point F′ and the vertex of the converging lens is l = d + (1/Φ)(1 − dΦ1) = d + 1/Φ − dΦ1/Φ. Hence
l/f = dΦ + 1 − dΦ1 = 1 + dΦ2 − d²Φ1Φ2.
Corrected: the printed solution omits the term 1 in this expression (it writes f/l = 1/(dΦ2 − d²Φ1Φ2)); with the term restored the maximum is found as follows.
Now, f/l is a maximum for the value of d at which l/f is a minimum. For minimum l/f, d(l/f)/dd = Φ2 − 2dΦ1Φ2 = 0, or d = 1/(2Φ1) = 5 cm.
Then l/f = 1 − 10(0.05) + 100(0.05)² = 0.75, so the required maximum ratio is f/l = 4/3.
Teacher's Note: Principal planes of a telephoto pair lie in front of the lenses; f/l measures telephoto compactness.
Exam Note: Set d(l/f)/dd = 0: d = 5 cm; ratio 4/3.
Question 55. Calculate the positions of the principal planes and focal points of a thick convex-concave glass lens if the curvature radius of the convex surface is equal to R1 = 10.0 cm and of the concave surface to R2 = 5.0 cm and the lens thickness is d = 3.0 cm.
Solution. The optical power of the first convex surface is Φ1 = (n − 1)/R1 = 5 D, as R1 = 10 cm (n = 1.5).
The optical power of the second concave surface is Φ2 = (1 − n)/R2 = −10 D.
So the optical power of the system is Φ = Φ1 + Φ2 − (d/n)Φ1Φ2 = −4 D.
Now the distance of the primary principal plane from the vertex of the convex surface is x = (1/Φ)(d/n)Φ2 (here n1 = 1 and n2 = n) = dΦ2/(Φn) = 5 cm, and the distance of the secondary principal plane from the vertex of the second concave surface is x′ = −(1/Φ)(d/n)Φ1 = −dΦ1/(Φn) = 2.5 cm (both measured in the direction of the light, i.e. to the right).
Completion (focal points were asked but not printed): f = −1/Φ = +25 cm and f′ = 1/Φ = −25 cm, so the front focal point F is 25 cm to the right of the primary principal plane (30 cm from the convex vertex) and the rear focal point F′ is 25 cm to the left of the secondary principal plane (19.5 cm to the left of the convex vertex); both are virtual, as the system is diverging.
Teacher's Note: Thick-lens formulas: power with (d/n)Φ1Φ2 correction; planes measured from the vertices.
Exam Note: Sign convention: right positive; Φ = −4 D.
Question 56. An aligned optical system consists of two thin lenses with focal lengths f1 and f2, the distance between the lenses being equal to d. The given system has to be replaced by one thin lens which, at any position of an object, would provide the same transverse magnification as the system. What must the focal length of this lens be equal to and in what position must it be placed with respect to the two-lens system?
Solution. The optical power of a system of two thin lenses placed in air is Φ = Φ1 + Φ2 − dΦ1Φ2, or 1/f = 1/f1 + 1/f2 − d/(f1f2), where f is the equivalent focal length. So 1/f = (f2 + f1 − d)/(f1f2), or
f = f1f2/(f1 + f2 − d) (1).
This equivalent focal length of the system of two lenses is measured from the primary principal plane.
As is clear from the figure, the distance of the primary principal plane from the optical centre of the first lens is O1H = x = (n/Φ)(d/n′)Φ1 = dΦ1/Φ (n = n′ = 1 for air) = df/f1 = (d/f1)·f1f2/(f1 + f2 − d) = df2/(f1 + f2 − d).
Now, if we place the equivalent lens at the primary principal plane of the lens system, it will provide the same transverse magnification as the system. So the distance of the equivalent lens from the vertex of the first lens is x = df2/(f1 + f2 − d).
Teacher's Note: Same magnification for all objects needs the lens at the front principal plane with the system's f.
Exam Note: Give f and x = df₂/(f₁+f₂−d) from lens 1.
Question 57. A system consists of a thin symmetrical converging glass lens with the curvature radius of its surfaces R = 38 cm and a plane mirror oriented at right angles to the optical axis of the lens. The distance between the lens and the mirror is l = 12 cm. What is the optical power of this system when the space between the lens and the mirror is filled up with water?
Solution. The plane mirror forms the image of the lens, and water fills the space between the two, behind the mirror, as shown in the figure. So the whole optical system is equivalent to two similar lenses L1, L2 separated by a distance 2l, and thus the power of this system is Φ = Φ1 + Φ2 − dΦ1Φ2/n0, where Φ1 = Φ2 = Φ′ = optical power of an individual lens and n0 = refractive index of water.
Now Φ′ = optical power of the first convex surface + optical power of the second concave surface = (n − 1)/R + (n0 − n)/R = (2n − n0 − 1)/R (1), where n is the refractive index of glass (1.5).
And so the optical power of the whole system is Φ = 2Φ′ − 2lΦ′²/n0 ≈ 3.0 D, on substituting the values (with d = 2l).
Teacher's Note: A mirror unfolds the system: lens plus its image, separated by 2l of water.
Exam Note: Use d = 2l, n0 = 4/3; Φ ≈ 3.0 D.
Question 58. At what thickness will a thick convex-concave glass lens in air
(a) serve as a telescope provided the curvature radius of its convex surface is ΔR = 1.5 cm greater than that of its concave surface?
(b) have the optical power equal to −1.0 D if the curvature radii of its convex and concave surfaces are equal to 10.0 and 7.5 cm respectively?
Solution. (a) A telescope in normal adjustment is a zero-power combination of lenses. Thus we require Φ = 0 = Φ1 + Φ2 − (d/n)Φ1Φ2.
But Φ1 = power of the convex surface = (n − 1)/(R0 + ΔR) and Φ2 = power of the concave surface = −(n − 1)/R0.
Thus 0 = −(n − 1)ΔR/(R0(R0 + ΔR)) + (d/n)(n − 1)²/(R0(R0 + ΔR)).
So d = nΔR/(n − 1) = 4.5 cm on putting the values (n = 1.5).
(b) Here Φ = −1 = 0.5/0.1 − 0.5/0.075 + (d/1.5)(0.5 × 0.5)/(0.1 × 0.075) = 5 − 20/3 + 200d/9 = −5/3 + 200d/9, so 200d/9 = 2/3 and d = 3/100 m = 3 cm.
Teacher's Note: Telescopic (afocal) condition means zero total power; thickness is fixed by Φ = 0.
Exam Note: Show Φ = 0 setup; (a) 4.5 cm, (b) 3 cm.
Question 59. Find the positions of the principal planes, the focal length and the sign of the optical power of a thick convex-concave glass lens
(a) whose thickness is equal to d and curvature radii of the surfaces are the same and equal to R;
(b) whose refractive surfaces are concentric and have the curvature radii R1 and R2 (R2 > R1).
Solution. (a) The power of the lens is (as in the previous problem) Φ = (n − 1)/R − (n − 1)/R − (d/n)((n − 1)/R)(−(n − 1)/R) = d(n − 1)²/(nR²) > 0.
The principal planes are located on the side of the convex surface at a distance d from each other, with the front principal plane being removed from the convex surface of the lens by a distance R/(n − 1). The focal length is f = 1/Φ = nR²/(d(n − 1)²) (completion).
(b) Here Φ = (n − 1)/R2 − (n − 1)/R1 + ((R2 − R1)/n)((n − 1)²/(R1R2)) = ((n − 1)(R2 − R1)/(R1R2))[−1 + (n − 1)/n] = −((n − 1)/n)(1/R1 − 1/R2) < 0.
Completion (not printed in the book): for the concentric surfaces both principal planes pass through the common centre of curvature, and the focal length is f = 1/Φ = −nR1R2/((n − 1)(R2 − R1)), i.e. the lens is diverging.
Note: the printed text of the first line of (b) shows (n + 1)/R2; it must be (n − 1)/R2, which has been used above.
Teacher's Note: A meniscus of equal radii is converging; a concentric meniscus is always diverging.
Exam Note: State sign of Φ and plane positions.
Question 60. A telescope system consists of two glass balls with radii R1 = 5.0 cm and R2 = 1.0 cm. What are the distance between the centres of the balls and the magnification of the system if the bigger ball serves as an objective?
Solution. Let the optical powers of the first and second surfaces of the ball of radius R1 be Φ′1 and Φ″1; then Φ′1 = (n − 1)/R1 and Φ″1 = (1 − n)/(−R1) = (n − 1)/R1.
This ball may be treated as a thick spherical lens of thickness 2R1. So the optical power of this sphere is Φ1 = Φ′1 + Φ″1 − (2R1/n)Φ′1Φ″1 = 2(n − 1)/(nR1) (1).
Similarly, the optical power of the second ball is Φ2 = 2(n − 1)/(nR2).
If the distance between the centres of these balls is d, then the optical power of the whole system is
Φ = Φ1 + Φ2 − dΦ1Φ2 = 2(n − 1)/(nR1) + 2(n − 1)/(nR2) − 4d(n − 1)²/(n²R1R2) = [2(n − 1)/(nR1R2)]·[(R1 + R2) − 2d(n − 1)/n].
Now, since this system serves as a telescope, the optical power of the system must be equal to zero: (R1 + R2) = 2d(n − 1)/n, as 2(n − 1)/(nR1R2) ≠ 0.
d = n(R1 + R2)/(2(n − 1)) = 9 cm (n = 1.5).
Since the diameter D of the objective is 2R1 and that of the eye-piece is 2R2, the magnification is Γ = D/d′ = 2R1/(2R2) = R1/R2 = 5.
(The printed text has "= R1R2 = 5" and calls the eye-piece diameter d; both are typographical slips for R1/R2 and 2R2.)
Teacher's Note: Afocal pair: total power zero; angular magnification equals ratio of the ball radii.
Exam Note: Use n = 1.5; d = 9 cm, Γ = 5.
Question 61. Two identical thick symmetrical biconvex lenses are put close together. The thickness of each lens equals the curvature radius of its surfaces, i.e. d = R = 3.0 cm. Find the optical power of this system in air.
Solution. The optical powers of the two surfaces of each lens are Φ1 = (n − 1)/R and Φ2 = (1 − n)/(−R) = (n − 1)/R. So the power of a lens of thickness d is
Φ′ = Φ1 + Φ2 − dΦ1Φ2/n = 2(n − 1)/R − d(n − 1)²/(nR²) = (n² − 1)/(nR) (for d = R).
Corrected: the printed solution adds the two lens powers directly (Φ = 2Φ′) and divides by n; this is not a valid combination rule, although its final number is right. Correct working: for each thick lens the principal planes lie R/(n + 1) = 1.2 cm inside from the vertices (x = dΦ2/(nΦ′)). The lenses touch at their vertices, so the rear principal plane of the first lens and the front principal plane of the second are separated by D = 2R/(n + 1) = 2.4 cm. Hence
Φ = 2Φ′ − DΦ′² = 2Φ′(1 − RΦ′/(n + 1)) = 2Φ′/n = 2(n² − 1)/(n²R) ≈ 37 D (n = 1.5, R = 3.0 cm).
Teacher's Note: Two thick lenses combine through their principal planes, not vertex to vertex.
Exam Note: Principal-plane gap 2R/(n+1) = 2.4 cm matters; answer 37 D.
Question 62. A ray of light propagating in an isotropic medium with refractive index n varying gradually from point to point has a curvature radius ρ determined by the formula 1/ρ = ∂(ln n)/∂N, where the derivative is taken with respect to the principal normal to the ray. Derive this formula, assuming that in such a medium the law of refraction n sin θ = const holds. Here θ is the angle between the ray and the direction of the vector ∇n at a given point.
Solution. We consider a ray QPR in a medium of gradually varying refractive index n. At P, the gradient of n is a vector with the given direction, while it is nearly the same at neighbouring points Q, R. The arc length QR is ds. We apply Snell's formula n sin θ = constant, where θ is to be measured from the direction ∇n. The refractive indices at Q, R, whose mid-point is P, are n ∓ ½|∇n| ds cos θ, so
(n − ½|∇n| ds cos θ)(sin θ + ½ cos θ dθ) = (n + ½|∇n| ds cos θ)(sin θ − ½ cos θ dθ),
or n cos θ dθ = |∇n| ds cos θ sin θ
(we have used here sin(θ ± ½dθ) = sin θ ± ½ cos θ dθ).
Now using the definition of the radius of curvature, 1/ρ = dθ/ds, so 1/ρ = (1/n)|∇n| sin θ.
The quantity |∇n| sin θ can be called ∂n/∂N, i.e. the derivative of n along the normal N to the ray. Then 1/ρ = (∂/∂N) ln n.
(The printed text writes dθ in place of ds in the refractive-index lines; ds is correct and is used above.)
Teacher's Note: Differentiate Snell's invariant n sin θ along the ray; only the normal gradient bends it.
Exam Note: Expand sin(θ ± ½dθ); drop second-order terms.
Question 63. Find the curvature radius of a ray of light propagating in a horizontal direction close to the Earth's surface where the gradient of the refractive index in air is equal to approximately 3·10−8 m−1. At what value of that gradient would the ray of light propagate all the way round the Earth?
Solution. 1/ρ = (1/n) p̂·∇n ≈ p̂·∇n ≈ |∇n| = 3 × 10−8 m−1 (since p̂ ∥ ∇n, both being vertical; n ≈ 1). So ρ = 3.3 × 107 m.
For the ray to go all the way round the Earth (figure: the ray curves concentrically with the surface), ρ = R = 6400 km = 6.4 × 106 m. Thus |∇n| = 1.6 × 10−7 m−1.
Teacher's Note: Ray curvature 1/ρ equals the vertical gradient of n; match ρ to Earth's radius.
Exam Note: Use n ≈ 1; answers 3.3×107 m and 1.6×10−7 m−1.
Step-by-Step IE Irodov Solutions for JEE Math
Complete Math Solutions for IE Irodov Solutions Chapter 27 Photometry And Geometrical Optics Part 2
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 27 Photometry And Geometrical Optics Part 2 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with IE Irodov Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.