Official IE Irodov Textbook Solutions: JEE Physics Chapter 28 Interference Of Light
Access comprehensive textbook solutions for Chapter 28 Interference Of Light using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Physics: Chapter 28 Interference Of Light
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Interference of Light - Problems 64 to 96
Interference of Light
Question 64. Demonstrate that when two harmonic oscillations are added, the time-averaged energy of the resultant oscillation is equal to the sum of the energies of the constituent oscillations, if both of them
(a) have the same direction and are incoherent, and all the values of the phase difference between the oscillations are equally probable;
(b) are mutually perpendicular, have the same frequency and an arbitrary phase difference.
Solution. (a) The net vibration is x = a1 cos ωt + a2 cos(ωt + δ), where δ is the phase difference between the two vibrations, which varies rapidly and randomly in the interval (0, 2π). This is what is meant by incoherence. Then
x = (a1 + a2 cos δ) cos ωt − a2 sin δ sin ωt.
Corrected: the book prints + a2 sin δ sin ωt; the sign should be minus. It does not affect the result because the term is squared.
The total energy is taken proportional to the time average of the square of the displacement:
E = ⟨(a1 + a2 cos δ)2 + a22 sin2 δ⟩ = a12 + a22,
as ⟨cos δ⟩ = 0. The factor ⟨cos2 ωt⟩ = ⟨sin2 ωt⟩ = 1/2 has been absorbed in the overall constant of proportionality. In the same units the energies of the two oscillations are a12 and a22 respectively, so the proposition is proved.
(b) Here r = a1 cos ωt i + a2 cos(ωt + δ) j, and the mean square displacement is ∝ a12 + a22 for any fixed δ (the cross term vanishes because i·j = 0). Hence E = E1 + E2.
Teacher's Note: Incoherent: the cross term averages to zero. Perpendicular components never interfere, so energies simply add.
Exam Note: Show cross term vanishing in each case.
Question 65. By means of plotting find the amplitude of the oscillation resulting from the addition of the following three oscillations of the same direction: ξ1 = a cos ωt, ξ2 = 2a sin ωt, ξ3 = 1.5a cos(ωt + π/3).
Solution. It is easier to do it analytically. ξ1 = a cos ωt, ξ2 = 2a sin ωt,
ξ3 = (3/2) a (cos(π/3) cos ωt − sin(π/3) sin ωt).
The resultant vibration is
ξ = (7a/4) cos ωt + a (2 − 3√3/4) sin ωt.
This has amplitude = (a/4) √(49 + (8 − 3√3)2) = 1.89 a.
Teacher's Note: Split each term into cos ωt and sin ωt parts, add components, then root-sum-square.
Exam Note: Add cos and sin coefficients separately; amplitude 1.89a.
Question 66. A certain oscillation results from the addition of coherent oscillations of the same direction ξk = a cos[ωt + (k − 1)φ], where k is the number of the oscillation (k = 1, 2, …, N), φ is the phase difference between the kth and (k − 1)th oscillations. Find the amplitude of the resultant oscillation.
Solution. Use the method of complex amplitudes. The amplitudes are A1 = a, A2 = a eiφ, …, AN = a ei(N−1)φ, and the resultant complex amplitude is
A = A1 + … + AN = a (1 + eiφ + e2iφ + … + ei(N−1)φ) = a (1 − eiNφ)/(1 − eiφ).
The corresponding ordinary amplitude is
|A| = a |(1 − eiNφ)/(1 − eiφ)| = a [(2 − 2 cos Nφ)/(2 − 2 cos φ)]1/2 = a sin(Nφ/2) / sin(φ/2).
Teacher's Note: Geometric series of phasors; modulus gives the grating-like factor sin(Nφ/2)/sin(φ/2).
Exam Note: Sum the geometric series, then take modulus.
Question 67. A system illustrated in Fig. 5.12 consists of two coherent point sources 1 and 2 located in a certain plane so that their dipole moments are oriented at right angles to that plane. The sources are separated by a distance d, the radiation wavelength is equal to λ. Taking into account that the oscillations of source 2 lag in phase behind the oscillations of source 1 by φ (φ < π), find:
(a) the angles θ at which the radiation intensity is maximum;
(b) the conditions under which the radiation intensity in the direction θ = π is maximum and in the opposite direction, minimum.
(Fig. 5.12: sources 1 and 2 lie on a line; θ is the angle of the direction of radiation measured from the line, from source 2 towards source 1.)
Solution.
(a) With the dipole moments perpendicular to the plane there is no variation with θ of the individual radiation amplitude, so the intensity variation is due to interference only. In the direction θ the wave from 2 travels an extra path d cos θ compared with that from 1, so it lags further behind. The condition for maxima is
(2π/λ) d cos θ + φ = 2kπ, i.e. d cos θ = (k − φ/2π) λ, k = 0, ±1, ±2, …
(b) Maximum for θ = π gives −d = (k − φ/2π) λ.
Minimum for θ = 0 gives d = (k′ − φ/2π + 1/2) λ.
Adding: (k + k′ − φ/π + 1/2) λ = 0. This can be true only if k′ = −k and φ = π/2, since 0 < φ < π. Then −d = (k − 1/4) λ with k = 0, −1, −2, … (otherwise the right side becomes positive). Putting k = −k̄, k̄ = 0, 1, 2, …:
d = (k̄ + 1/4) λ, with φ = π/2.
Teacher's Note: Phase lag of source 2 plus path difference d cos θ gives the maxima condition; opposite directions fix φ.
Exam Note: Write total phase = 2kπ; for (b) add both conditions.
Question 68. A stationary radiating system consists of a linear chain of parallel oscillators separated by a distance d, with the oscillation phase varying linearly along the chain. Find the time dependence of the phase difference Δφ between the neighbouring oscillators at which the principal radiation maximum of the system will be "scanning" the surroundings with the constant angular velocity ω.
Solution. If Δφ is the phase difference between neighbouring radiators, then for a maximum in the direction θ we must have
(2π/λ) d cos θ + Δφ = 2πk.
For constant angular velocity, θ = ωt + β. Thus (d/λ) cos(ωt + β) + Δφ/2π = k, or
Δφ = 2π [k − (d/λ) cos(ωt + β)].
To get the answer of the book, put β = α − π/2, which gives Δφ = 2πk − (2πd/λ) sin(ωt + α).
Teacher's Note: Maximum direction θ = ωt + β inserted into the interference condition gives Δφ as a cosine in time.
Exam Note: Put θ = ωt + β into the maximum condition.
Question 69. In Lloyd's mirror experiment (Fig. 5.13) a light wave emitted directly by the source S (narrow slit) interferes with the wave reflected from a mirror M. As a result, an interference fringe pattern is formed on the screen Sc. The source and the mirror are separated by a distance l = 100 cm. At a certain position of the source the fringe width on the screen was equal to Δx = 0.25 mm, and after the source was moved away from the mirror plane by Δh = 0.60 mm, the fringe width decreased η = 1.5 times. Find the wavelength of light.
Solution. From the general formula Δx = lλ/d we find that Δx/η = lλ/(d + 2Δh), since d increases to d + 2Δh when the source is moved away from the mirror plane by Δh. Thus ηd = d + 2Δh, or d = 2Δh/(η − 1). Finally
λ = 2ΔhΔx / ((η − 1) l) = 0.6 μm.
Teacher's Note: Source and its mirror image act as two sources; moving the source by Δh changes d by 2Δh.
Exam Note: Image separation d = 2h; use fringe width ratio.
Question 70. Two coherent plane light waves propagating with a divergence angle ψ ≪ 1 fall almost normally on a screen. The amplitudes of the waves are equal. Demonstrate that the distance between the neighbouring maxima on the screen is equal to Δx = λ/ψ, where λ is the wavelength.
Solution. We can think of the two coherent plane waves as emitted from two coherent point sources very far away. Then Δx = lλ/d = λ/(d/l). But d/l = ψ (if ψ ≪ 1). So Δx = λ/ψ.
Teacher's Note: Plane waves at a small angle behave like two distant sources; d/l is the angular separation ψ.
Exam Note: Use Δx = lλ/d and d/l = ψ.
Question 71. Figure 5.14 illustrates the interference experiment with Fresnel mirrors. The angle between the mirrors is α = 12′, the distances from the mirrors' intersection line to the narrow slit S and the screen Sc are equal to r = 10.0 cm and b = 130 cm respectively. The wavelength of light is λ = 0.55 μm. Find:
(a) the width of a fringe on the screen and the number of possible maxima;
(b) the shift of the interference pattern on the screen when the slit is displaced by δl = 1.0 mm along the arc of radius r with centre at the point O;
(c) at what maximum width δmax of the slit the interference fringes on the screen are still observed sufficiently sharp.
Solution. (a) Here S′S″ = d = 2rα. Then Δx = (b + r)λ/(2rα). Putting b = 1.3 m, r = 0.1 m, λ = 0.55 μm, α = 12′ = 1/(5 × 57) radian, we get Δx = 1.1 mm.
Number of possible maxima = 2bα/Δx + 1 ≈ 8.3 + 1 ≈ 9. (2bα is the length of the part of the screen that receives light after reflection from both mirrors. We add 1 because in a distance Δx there are two maxima.)
(b) When the slit moves by δl along the arc of radius r, the incident ray on the mirror rotates by δl/r; this is also the rotation of the reflected ray. There is then a shift of the fringes of magnitude b δl/r = 13 mm.
(c) If the width of the slit is δ, imagine the slit to consist of two narrow slits with separation δ. The fringe pattern due to the wide slit is the superposition of the patterns due to these two narrow slits. The full pattern will not be sharp at all if the patterns due to the two narrow slits are Δx/2 apart, because then the maxima due to one fill the minima due to the other. Thus we demand that
b δmax/r = Δx/2 = (b + r)λ/(4rα), so δmax = (1 + r/b) λ/(4α) = 42 μm.
Teacher's Note: Two virtual sources separated by 2rα; slit width smears fringes when shift reaches half a fringe width.
Exam Note: Quote d = 2rα; sharpness limit is half a fringe.
Question 72. A plane light wave falls on Fresnel mirrors with an angle α = 2.0′ between them. Determine the wavelength of light if the width of the fringe on the screen Δx = 0.55 mm.
Solution. To get this case we must let r → ∞ in the formula for Δx of the last example. So Δx = (b + r)λ/(2αr) → λ/(2α). (A plane wave is like light emitted from a point source at ∞.) Then
λ = 2αΔx = 0.64 μm.
Teacher's Note: Plane incident wave means source at infinity, so (b + r)/r → 1 and Δx = λ/2α.
Exam Note: Let r → ∞ in the Fresnel-mirror formula.
Question 73. A lens of diameter 5.0 cm and focal length f = 25.0 cm was cut along the diameter into two identical halves. In the process, the layer of the lens a = 1.00 mm in thickness was lost. Then the halves were put together to form a composite lens. In this focal plane a narrow slit was placed, emitting monochromatic light with wavelength λ = 0.60 μm. Behind the lens a screen was located at a distance b = 50 cm from it. Find:
(a) the width of a fringe on the screen and the number of possible maxima;
(b) the maximum width of the slit δmax at which the fringes on the screen will be still observed sufficiently sharp.
Solution. (a) Consider the upper half of the lens (the axis of this half lies a/2 from the slit's axis). The emergent light is at an angle a/2f from the axis. Thus the divergence angle of the two emergent beams is ψ = a/f. When they interfere, the fringes have width
Δx = λ/ψ = fλ/a = 0.15 mm.
The patch on the screen illuminated by both beams has width bψ and contains
bψ/Δx = b a2/(f2λ) = 13 fringes
(ignoring the 1 compared with it, as in Q.71 (a)).
(b) We follow the logic of Q.71 (c). From one edge of the slit to the other the distance is δ. If we imagine the edge to shift by this distance, the angle ψ/2 will increase by Δψ/2 = δ/2f and the light will shift by b δ/2f on each side; the fringe pattern will therefore shift by δb/f. Equating this to Δx/2 = fλ/(2a) we get
δmax = f2λ/(2ab) = 37.5 μm.
Teacher's Note: Two half-lenses send plane waves at angle a/f; fringes then follow Δx = λ/ψ.
Exam Note: Quote ψ = a/f; fringes N ≈ bψ/Δx.
Question 74. The distances from a Fresnel biprism to a narrow slit and a screen are equal to a = 25 cm and b = 100 cm respectively. The refracting angle of the glass biprism is equal to θ = 20′. Find the wavelength of light if the width of the fringe on the screen is Δx = 0.55 mm.
Solution. Δx = lλ/d, with l = a + b, d = 2(n − 1)θa (each half deviates the rays by δ = (n − 1)θ, and d = 2δ·a), n = refractive index of glass. Thus
λ = 2(n − 1)θ a Δx/(a + b) = 0.64 μm
(taking n = 1.5 for glass, which the problem does not state).
Teacher's Note: Biprism makes two virtual sources 2(n − 1)θa apart; then use Δx = lλ/d.
Exam Note: State n = 1.5 assumed; d = 2(n − 1)θa.
Question 75. A plane light wave with wavelength λ = 0.70 μm falls normally on the base of a biprism made of glass (n = 1.520) with refracting angle θ = 5.0°. Behind the biprism (Fig. 5.15) there is a plane-parallel plate, with the space between them filled up with benzene (n′ = 1.500). Find the width of a fringe on the screen Sc placed behind this system.
Solution. It will be assumed that the benzene between the biprism and the glass plate forms two prisms complementary to the biprism, with their bases opposite. The net deviation produced by the two oppositely placed prisms is
δ = (n − 1)θ − (n′ − 1)θ = (n − n′)θ.
Hence as in the previous problem d = 2aδ = 2aθ(n − n′), so Δx = (a + b)λ/(2aθ(n − n′)). For a plane incident wave let a → ∞, so
Δx = λ/(2θ(n − n′)) = 0.2 mm.
Teacher's Note: Benzene prisms deviate oppositely, so net deviation is only (n − n′)θ, giving wide fringes.
Exam Note: Net deviation (n − n′)θ; a → ∞ for plane wave.
Question 76. A plane monochromatic light wave falls normally on a diaphragm with two narrow slits separated by a distance d = 2.5 mm. A fringe pattern is formed on a screen placed at a distance l = 100 cm behind the diaphragm. By what distance and in which direction will these fringes be displaced when one of the slits is covered by a glass plate of thickness h = 10 μm?
Solution. The extra phase difference introduced by the glass plate is (2π/λ)(n − 1)h. This will cause a shift equal to (n − 1)h/λ fringe widths, i.e. by
((n − 1)h/λ) × (lλ/d) = (n − 1)hl/d = 2 mm
(taking n = 1.5 for glass, which the problem does not state). The fringes move down if the lower slit is covered by the plate, to compensate for the extra phase shift introduced by the plate; that is, they move towards the covered slit.
Teacher's Note: Plate adds optical path (n − 1)h; the pattern shifts toward the covered slit.
Exam Note: Shift = (n − 1)hl/d, towards covered slit.
Question 77. Figure 5.16 illustrates an interferometer used in measurements of refractive indices of transparent substances. Here S is a narrow slit illuminated by monochromatic light with wavelength λ = 589 nm, 1 and 2 are identical tubes with air of length l = 10.0 cm each, D is a diaphragm with two slits. After the air in tube 1 was replaced with ammonia gas, the interference pattern on the screen Sc was displaced upward by N = 17 fringes. The refractive index of air is equal to n = 1.000277. Determine the refractive index of ammonia gas.
Solution. The number of fringes shifted = (n′ − n) l/λ = N. So
n′ = n + Nλ/l = 1.000377.
Teacher's Note: Each fringe shift equals one wavelength of extra optical path (n′ − n)l.
Exam Note: Set (n′ − n)l = Nλ.
Question 78. An electromagnetic wave falls normally on the boundary between two isotropic dielectrics with refractive indices n1 and n2. Making use of the continuity condition for the tangential components E and H across the boundary, demonstrate that at the interface the electric field vector E
(a) of the transmitted wave experiences no phase jump;
(b) of the reflected wave is subjected to the phase jump equal to π if it is reflected from a medium of higher optical density.
Solution. (a) Let E, E′, E″ correspond to the incident, reflected and transmitted waves. Due to the continuity of the tangential component of the electric field across the interface,
Eτ + E′τ = E″τ (1)
where the subscript τ means tangential. The energy flux density is S = E × H. Since H√(μμ0) = E√(εε0), H = E √(ε0/μ0) √(ε/μ) = n √(ε0/μ0) E. Now S ∝ nE2, and since the light is incident normally,
n1Eτ2 = n1E′τ2 + n2E″τ2 (2)
So n1(Eτ − E′τ) = n2E″τ (3), and E″τ = 2n1Eτ/(n1 + n2). Since E″τ and Eτ have the same sign, there is no phase change in this case.
(b) From (1) and (3): (n2 + n1)E′τ + (n2 − n1)Eτ = 0, or E′τ = ((n1 − n2)/(n1 + n2)) Eτ. If n2 > n1, then E′τ and Eτ have opposite signs. Thus the reflected wave has an abrupt change of phase by π if n2 > n1, i.e. on reflection when light is incident from the rarer to the denser medium.
Teacher's Note: Tangential E and H continuity gives the coefficients; the sign of n1 − n2 decides the phase jump.
Exam Note: State boundary conditions first; sign of reflection coefficient.
Question 79. A parallel beam of white light falls on a thin film whose refractive index is equal to n = 1.33. The angle of incidence is θ1 = 52°. What must the film thickness be equal to for the reflected light to be coloured yellow (λ = 0.60 μm) most intensively?
Solution. The path difference between rays (1) and (2) reflected from the two faces is
2nd sec θ2 − 2d tan θ2 sin θ1 = 2d (n − sin2θ1/n)/√(1 − sin2θ1/n2) = 2d √(n2 − sin2θ1).
For bright fringes this must equal (k + 1/2)λ, where 1/2 comes from the phase change of π for ray (1). Here k = 0, 1, 2, … Thus 4d√(n2 − sin2θ1) = (2k + 1)λ, or
d = λ(1 + 2k)/(4√(n2 − sin2θ1)) = 0.14 (1 + 2k) μm.
Teacher's Note: Optical path difference 2d√(n² − sin²θ) plus half-wave loss at the top surface fixes bright thickness.
Exam Note: Include the λ/2 reflection loss; k = 0, 1, 2, …
Question 80. Find the minimum thickness of a film with refractive index 1.33 at which light with wavelength 0.64 μm experiences maximum reflection while light with wavelength 0.40 μm is not reflected at all. The incidence angle of light is equal to 30°.
Solution. Given: 2d√(n2 − 1/4) = (k + 1/2) × 0.64 μm (bright), and 2d√(n2 − 1/4) = k′ × 0.40 μm (dark), where k, k′ are integers. Thus 64(k + 1/2) = 40k′, or 4(2k + 1) = 5k′. The least solution is k = 2, k′ = 4. Hence
d = 4 × 0.40/(2√(n2 − 1/4)) = 0.65 μm.
Teacher's Note: Bright for one wavelength and dark for the other gives an integer condition; smallest solution is minimum.
Exam Note: Equate both conditions; find smallest integer pair.
Question 81. To decrease light losses due to reflection from the glass surface the latter is coated with a thin layer of substance whose refractive index n′ = √n, where n is the refractive index of the glass. In this case the amplitudes of electromagnetic oscillations reflected from both coated surfaces are equal. At what thickness of that coating is the glass reflectivity in the direction of the normal equal to zero for light with wavelength λ?
Solution. When the glass surface is coated with a material of R.I. n′ = √n (n = R.I. of glass) of appropriate thickness, reflection is zero because of interference between various multiply reflected waves. We show this below.
Let a wave of unit amplitude be normally incident from the left. The reflected amplitude at the first surface is −r, where r = (√n − 1)/(√n + 1) (the minus sign shows the phase jump). The transmitted wave has amplitude t = 2/(1 + √n). This wave is reflected at the second face and has amplitude −tr (because (n − √n)/(n + √n) = (√n − 1)/(√n + 1)). The emergent wave has amplitude −tt′r. We prove below that tt′ = 1 − r2. There is also a reflected part of amplitude trr′ = −tr2, where r′ is the reflection coefficient for a ray incident from the coating towards air (r′ = +r). After reflection from the second face a wave of amplitude +tt′r3 = +(1 − r2)r3 emerges. Let δ be the phase of the wave after traversing the coating both ways. Then the complete reflected wave is
−r − (1 − r2) r eiδ + (1 − r2) r3 e2iδ − (1 − r2) r5 e3iδ + …
= −r − (1 − r2) r eiδ/(1 + r2eiδ) = −r [1 + r2eiδ + (1 − r2)eiδ]/(1 + r2eiδ) = −r (1 + eiδ)/(1 + r2eiδ).
This vanishes if δ = (2k + 1)π. But δ = (2π/λ) 2√n d, so
d = (λ/(4√n)) (2k + 1).
We now deduce tt′ = 1 − r2 and r′ = +r. This follows from the principle of reversibility of light paths: tt′ + r2 = 1 and −rt + r′t = 0, so tt′ = 1 − r2 and r′ = +r. (−r is the reflection ratio for a wave entering a denser medium.)
Teacher's Note: Sum multiply reflected waves as a geometric series; zero reflection needs optical thickness an odd number of quarter-wavelengths.
Exam Note: Quarter-wave coating: d = (2k + 1)λ/(4√n).
Question 82. Diffused monochromatic light with wavelength λ = 0.60 μm falls on a thin film with refractive index n = 1.5. Determine the film thickness if the angular separation of neighbouring maxima observed in reflected light at the angles close to θ = 45° to the normal is equal to δθ = 3.00°.
Solution. The condition for maxima is 2d√(n2 − sin2θ1) = (k + 1/2)λ. This must hold for angles θ ± δθ/2 with successive values of k:
2d√(n2 − sin2(θ + δθ/2)) = (k − 1/2)λ, 2d√(n2 − sin2(θ − δθ/2)) = (k + 1/2)λ.
Thus λ = 2d {√(n2 − sin2θ + δθ sin θ cos θ) − √(n2 − sin2θ − δθ sin θ cos θ)} = 2d δθ sin θ cos θ/√(n2 − sin2θ). Thus
d = √(n2 − sin2θ) λ/(sin 2θ δθ) = 15.2 μm
(δθ in radians).
Teacher's Note: Neighbouring maxima differ by one order; expand the condition for small δθ about θ.
Exam Note: Express δθ in radians before substituting.
Question 83. Monochromatic light passes through an orifice in a screen Sc (Fig. 5.17) and being reflected from a thin transparent plate P produces fringes of equal inclination on the screen. The thickness of the plate is equal to d, the distance between the plate and the screen is l, the radii of the ith and kth dark rings are ri and rk. Find the wavelength of light taking into account that ri,k ≪ l.
Solution. For small angles θ we write for dark fringes 2d√(n2 − sin2θ) = 2d(n − sin2θ/2n) = (k + 0)λ. For the first dark fringe θ = 0 and 2dn = (k0 + 0)λ. For the ith dark fringe
2d(n − sin2θi/2n) = (k0 − i + 1)λ,
so sin2θi = (nλ/d)(i − 1) = ri2/4l2 (the light reflected from the plate appears to come from a point at distance 2l, so θ ≈ r/2l). Finally
(nλ/d)(i − k) = (ri2 − rk2)/4l2, so λ = d(ri2 − rk2)/(4l2 n (i − k)),
where n is the refractive index of the plate.
Teacher's Note: Small-angle expansion of the dark-ring condition; ring radius relates to angle by r = 2lθ.
Exam Note: Use sin θ ≈ r/2l and count rings i − k.
Question 84. A plane monochromatic light wave with wavelength λ falls on the surface of a glass wedge whose faces form an angle α ≪ 1. The plane of incidence is perpendicular to the edge, the angle of incidence is θ1. Find the distance between the neighbouring fringe maxima on the screen placed at right angles to reflected light.
Solution. We have the usual equation for maxima: 2hkα√(n2 − sin2θ1) = (k + 1/2)λ. Here hk = distance of the fringe from the top (edge), and hkα = dk = thickness of the film. Thus on the screen placed at right angles to the reflected light
Δx = (hk − hk−1) cos θ1 = λ cos θ1/(2α√(n2 − sin2θ1)).
Teacher's Note: Thickness at k-th fringe is hkα; projecting fringe spacing on a screen gives cos θ1.
Exam Note: Spacing along wedge, then project by cos θ1.
Question 85. Light with wavelength λ = 0.55 μm from a distant point source falls normally on the surface of a glass wedge. A fringe pattern whose neighbouring maxima on the surface of the wedge are separated by a distance Δx = 0.21 mm is observed in reflected light. Find:
(a) the angle between the wedge faces;
(b) the degree of light monochromatism (Δλ/λ) if the fringes disappear at a distance l ≈ 1.5 cm from the wedge's edge.
Solution. (a) For normal incidence, using the above formula, Δx = λ/(2nα), so α = λ/(2nΔx) = 3′ on putting the values (n = 1.5 for glass).
(b) In a distance l on the wedge there are N = l/Δx fringes. If the fringes disappear there, it must be due to the maxima due to the component of wavelength λ coinciding with the minima due to the component of wavelength λ + Δλ. Thus Nλ = (N − 1/2)(λ + Δλ), or Δλ = λ/2N, so
Δλ/λ = 1/2N = Δx/2l = 0.21/30 = 0.007.
(The solution notes that the answer given in the book is off by a factor of 2.)
Teacher's Note: Fringes vanish when order difference between the two wavelengths reaches one half.
Exam Note: Condition: N·Δλ/λ = 1/2 at the vanishing point.
Question 86. The convex surface of a plano-convex glass lens comes into contact with a glass plate. The curvature radius of the lens's convex surface is R, the wavelength of light is equal to λ. Find the width Δr of a Newton ring as a function of its radius r in the region where Δr ≪ r.
Solution. We have r2 = (1/2) kλR. For k differing by 1 (Δk = 1): 2rΔr = (1/2)Δk λR = (1/2)λR, or
Δr = λR/(4r).
Teacher's Note: Differentiate r² = kλR/2 with respect to k; rings crowd together as r grows.
Exam Note: Differentiate r² ∝ k with Δk = 1.
Question 87. The convex surface of a plano-convex glass lens with curvature radius R = 40 cm comes into contact with a glass plate. A certain ring observed in reflected light has a radius r = 2.5 mm. Watching the given ring, the lens was gradually removed from the plate by a distance Δh = 5.0 μm. What has the radius of that ring become equal to?
Solution. r2/R = (1/2)kλ. After the lens is raised, the air gap at each radius increases by Δh, so for the same ring (same k) r′2/R + 2Δh = (1/2)kλ. Hence
r′ = √(r2 − 2RΔh) = 1.5 mm.
Teacher's Note: Raising the lens adds 2Δh to the path difference, so the same ring moves inward.
Exam Note: Keep the order k fixed; add 2Δh to path.
Question 88. At the crest of a spherical surface of a plano-convex lens there is a ground-off plane spot of radius r0 = 3.0 mm through which the lens comes into contact with a glass plate. The curvature radius of the lens's convex surface is equal to R = 150 cm. Find the radius of the sixth bright ring when observed in reflected light with wavelength λ = 655 nm.
Solution. In this case the path difference is (r2 − r02)/R for r > r0 and zero for r ≤ r0. This must equal (k − 1/2)λ (where k = 6 for the sixth bright ring). Thus
r = √(r02 + (k − 1/2)λR) = 3.8 mm.
Teacher's Note: Flat spot makes air gap zero up to r0; gap grows as (r² − r0²)/2R beyond.
Exam Note: Use r² − r0², not r²; bright ring needs (k − 1/2)λ.
Question 89. A plano-convex glass lens with curvature radius of spherical surface R = 12.5 cm is pressed against a glass plate. The diameters of the tenth and fifteenth dark Newton's rings in reflected light are equal to d1 = 1.00 mm and d2 = 1.50 mm. Find the wavelength of light.
Solution. d12/4 = k1Rλ, d22/4 = k2Rλ, so
λ = (d22 − d12)/(4(k2 − k1)R).
Substituting the values, λ = 0.5 μm.
Teacher's Note: Subtracting two ring equations removes the unknown central-contact error and needs only k₂ − k₁.
Exam Note: Subtract the two ring equations; k₂ − k₁ = 5.
Question 90. Two plano-convex thin glass lenses are brought into contact with their spherical surfaces. Find the optical power of such a system if in reflected light with wavelength λ = 0.60 μm the diameter of the fifth bright ring is d = 1.50 mm.
Solution. The air gap at radius r is r2(1/R1 + 1/R2)/2, so the condition for bright rings is
r2(1/R1 + 1/R2) = (2k + 1)λ/2.
Thus (fifth bright ring, k = 4, r = d/2): 1/R1 + 1/R2 = (9/2)λ · 4/d2 = 18λ/d2. Now 1/f1 = (n − 1)/R1, 1/f2 = (n − 1)/R2, so
Φ = 1/f = 1/f1 + 1/f2 = (n − 1) 18λ/d2 = 2.40 D.
Here n = R.I. of glass = 1.5.
Teacher's Note: Air gap between two convex surfaces adds both curvatures; thin lenses in contact add their powers.
Exam Note: Fifth bright ring means k = 4; take n = 1.5.
Question 91. Two thin symmetric glass lenses, one biconvex and the other biconcave, are brought into contact to make a system with optical power Φ = 0.50 D. Newton's rings are observed in reflected light with wavelength λ = 0.61 μm. Determine:
(a) the radius of the tenth dark ring;
(b) how the radius of that ring will change when the space between the lenses is filled up with water.
Solution. (a) Here Φ = (n − 1)(2/R1 − 2/R2), so 1/R1 − 1/R2 = Φ/(2(n − 1)). Then rk2(1/R1 − 1/R2) = (Φ/(2(n − 1))) rk2 = kλ. k = 0 is the dark spot; excluding it, we take k = 10 here. Then
r = √(20λ(n − 1)/Φ) = 3.49 mm (n = 1.5).
(b) With water of index n0 in the gap the condition becomes n0 r̄2(1/R1 − 1/R2) = kλ, where r̄ is the new radius. Thus n0 r̄2 = r2, or
r̄ = r/√n0 = 3.03 mm, where n0 = R.I. of water = 1.33.
Teacher's Note: Gap thickness r²(1/R₁ − 1/R₂)/2 links ring radius to the system power; water multiplies path by n₀.
Exam Note: Do not count the central dark spot as k = 1.
Question 92. The spherical surface of a plano-convex lens comes into contact with a glass plate. The space between the lens and the plate is filled up with carbon dioxide. The refractive indices of the lens, carbon dioxide, and the plate are equal to n1 = 1.50, n2 = 1.63, and n3 = 1.70 respectively. The curvature radius of the spherical surface of the lens is equal to R = 100 cm. Determine the radius of the fifth dark Newton's ring in reflected light with wavelength λ = 0.50 μm.
Solution. Since n1 < n2 < n3, both reflections involve a phase jump of π, so they cancel. A dark ring then needs (r2/R) n2 = (k + 1/2)λ, so
r = √((2K − 1) λR/2n2), K = 5.
Numerically (added; the book gives only the formula): r = √(9 × 0.50 × 10−6 × 1/(2 × 1.63)) ≈ 1.2 mm.
Teacher's Note: Both reflections are from denser media, so no net half-wave shift; dark ring needs half-integer order.
Exam Note: Check phase jumps at both surfaces first.
Question 93. In a two-beam interferometer the orange mercury line composed of two wavelengths λ1 = 576.97 nm and λ2 = 579.03 nm is employed. What is the least order of interference at which the sharpness of the fringe pattern is the worst?
Solution. The pattern is worst when the maxima of one wavelength fall on the minima of the other: n1λ1 = (n1 − 1/2)λ2. Putting λ1 = λ, λ2 = λ + Δλ we get n1Δλ = λ/2, or
n1 = λ/(2Δλ) ≈ λ1/(2(λ2 − λ1)) = 140.
Teacher's Note: Fringes wash out when the two wavelengths' orders differ by one half.
Exam Note: Condition: order difference equals 1/2.
Question 94. In Michelson's interferometer the yellow sodium line composed of two wavelengths λ1 = 589.0 nm and λ2 = 589.6 nm is employed. In the process of translational displacement of one of the mirrors the interference pattern vanished periodically (why?). Find the displacement of the mirror between two successive appearances of the sharpest pattern.
Solution. (Why: the pattern vanishes when the maxima of one wavelength fall on the minima of the other. This explanation is added; the book solution does not state it.) The pattern is sharpest again when 2Δh = kλ2 = (k + 1)λ1, so k(λ2 − λ1) = λ1, k = λ1/(λ2 − λ1), and
Δh = λ1λ2/(2(λ2 − λ1)) ≈ λ2/(2Δλ) = 0.29 mm.
Teacher's Note: Two wavelengths drift in and out of step; the mirror shift gains exactly one extra fringe for one wavelength.
Exam Note: Condition: path difference differs by one full order.
Question 95. When a Fabry-Perot etalon is illuminated by monochromatic light with wavelength λ an interference pattern, the system of concentric rings, appears in the focal plane of a lens (Fig. 5.18). The thickness of the etalon is equal to d. Determine how (a) the position of rings; (b) the angular width of fringes depends on the order of interference.
Solution. (a) The path difference is Δ = 2d sec θ − 2d tan θ sin θ = 2d cos θ = kλ. So the angle θ of the kth ring is given by cos θ = kλ/2d: the order k is highest at the centre (θ = 0) and decreases as the ring angle increases.
(b) Differentiating, 2d sin θ δθ = λ on putting δk = −1. Thus
δθ = λ/(2d sin θ).
δθ decreases as θ increases.
Teacher's Note: Ring angle from cos θ = kλ/2d; differentiating with δk = −1 gives angular width.
Exam Note: Show 2d cos θ = kλ, then differentiate.
Question 96. For the Fabry-Perot etalon of thickness d = 2.5 cm find:
(a) the highest order of interference of light with wavelength λ = 0.50 μm;
(b) the dispersion region Δλ, i.e. the spectral interval of wavelengths, within which there is still no overlap with other orders of interference if the observation is carried out approximately at wavelength λ = 0.50 μm.
Solution. (a) We have kmax = 2d/λ (for θ = 0) = 105.
(b) 2d cos θ = kλ = (k − 1)(λ + Δλ). Thus Δλ = λ/k and, with k = 2d/λ,
Δλ = λ2/2d = 5 pm.
Teacher's Note: Highest order is at normal incidence; overlap occurs when the next wavelength's adjacent order coincides.
Exam Note: k_max = 2d/λ; free spectral range λ²/2d.
Download IE Irodov Solutions for JEE Math PDF
Access JEE Mathematics Solutions
Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 28 Interference Of Light. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.