IE Irodov Solutions Chapter 27 Photometry And Geometrical Optics Part 1

Step-by-Step IE Irodov Solutions for JEE Physics Chapter 27 Photometry And Geometrical Optics

Review structured textbook solutions for JEE Physics Chapter 27 Photometry And Geometrical Optics prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 27 Photometry And Geometrical Optics Textbook Solutions PDF

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Photometry and Geometrical Optics - Questions 1 to 31

Photometry and Geometrical Optics

Question 1. Making use of the spectral response curve for an eye (see Fig. 5.1), find: (a) the energy flux corresponding to the luminous flux of 1.0 lm at the wavelengths 0.51 and 0.64 μm; (b) the luminous flux corresponding to the wavelength interval from 0.58 to 0.63 μm if the respective energy flux, equal to Φe = 4.5 mW, is uniformly distributed over all wavelengths of the interval. The function V(λ) is assumed to be linear in the given spectral interval.

Solution. (a) The relative spectral response V(λ) is defined so that A/V(λ) is the energy flux of wavelength λ needed to produce a unit luminous flux (A = 1.6 mW/lm is the conversion factor). At λ = 0.51 μm, from the curve V(λ) = 0.50, so the energy flux per lumen = 1.6/0.50 = 3.2 mW. At λ = 0.64 μm, V(λ) = 0.17, so the energy flux per lumen = 1.6/0.17 = 9.4 mW.

(b) The energy is spread uniformly: dΦe(λ) = Φe dλ/(λ2 − λ1) for λ1 ≤ λ ≤ λ2. Then Φ = ∫V(λ) dΦe/A = Φe/(A(λ2 − λ1)) ∫λ1λ2 V(λ) dλ. Since V is linear in the interval, (1/(λ2 − λ1)) ∫V dλ = ½(V(λ1) + V(λ2)). Hence Φ = Φe/(2A) · (V(λ1) + V(λ2)). With V(0.58 μm) = 0.85 and V(0.63 μm) = 0.25: Φ = (4.5/(2 × 1.6)) × 1.1 = 1.55 lm.

Answers: (a) 3.2 mW and 9.4 mW; (b) 1.55 lm.

Teacher's Note: Reading V(λ) from the curve and the trapezoid-average trick for a linear V.

Exam Note: Show formula, curve readings, then arithmetic.

Question 2. A point isotropic source emits a luminous flux Φ = 10 lm with wavelength λ = 0.59 μm. Find the peak strength values of electric and magnetic fields in the luminous flux at a distance r = 1.0 m from the source. Make use of the curve illustrated in Fig. 5.1.

Solution. Φe = ΦA/V(λ). Also Φe = ½√(ε0/μ0) Em² × 4πr² (mean energy flux density times area). So Em² = (ΦA/(2πr²V(λ))) √(μ0/ε0). For λ = 0.59 μm, V(λ) = 0.74. Thus Em = 1.14 V/m. Also Hm = √(ε0/μ0) Em = 3.02 mA/m.

Answers: Em = 1.14 V/m, Hm = 3.02 mA/m.

Teacher's Note: Convert lumens to watts via V(λ), then equate to the Poynting flux over a sphere.

Exam Note: Quote A = 1.6 mW/lm and the √(μ0/ε0) step.

Question 3. Find the mean illuminance of the irradiated part of an opaque sphere receiving (a) a parallel luminous flux resulting in illuminance E0 at the point of normal incidence; (b) light from a point isotropic source located at a distance l = 100 cm from the centre of the sphere; the radius of the sphere is R = 60 cm and the luminous intensity is I = 36 cd.

Solution. (a) Mean illuminance = total luminous flux incident / total area illuminated. The incident flux is E0·πR² (the cross-section of the sphere), and the illuminated area is a hemisphere, 2πR². Hence ⟨E⟩ = πR²E0/(2πR²) = ½E0.

(b) The tangent cone from the source to the sphere has half-angle α, with sin α = R/l, and tangent length √(l² − R²). The sphere subtends the solid angle 2π(1 − cos α) = 2π(1 − √(l² − R²)/l), so it receives the flux 2πI(1 − √(l² − R²)/l). The irradiated cap has area 2πR²∫090°−α sin θ dθ = 2πR²(1 − sin α) = 2πR²(1 − R/l). Therefore ⟨E⟩ = (I/R²)·(1 − √(1 − (R/l)²))/(1 − R/l). Substituting I = 36 cd, R = 0.6 m, l = 1.0 m: (36/0.36) × (1 − 0.8)/(1 − 0.6) = 100 × 0.5 = 50 lux.

Answers: (a) ⟨E⟩ = E0/2; (b) ⟨E⟩ = 50 lx. (Figure in the book: tangent cone from the source touching the sphere, half-angle α, tangent length √(l² − R²).)

Teacher's Note: Flux over illuminated area; for a point source use the solid angle of the tangent cone.

Exam Note: Part (a) is a two-line answer, E0/2.

Question 4. Determine the luminosity of a surface whose luminance depends on direction as L = L0 cos θ, where θ is the angle between the radiation direction and the normal to the surface.

Solution. Luminance L is the light energy emitted per unit area in a given direction per unit solid angle divided by cos θ. Luminosity M is the energy emitted per unit area, so M = ∫L cos θ dΩ, the integration being over the forward hemisphere. With L = L0 cos θ: M = ∫L0 cos²θ dΩ = 2π L0 ∫0π/2 cos²θ sin θ dθ = (2/3)π L0.

Answer: M = (2/3)πL0.

Teacher's Note: M = ∫L cosθ dΩ over a hemisphere, with dΩ = 2π sinθ dθ.

Exam Note: Do not forget the extra cosθ from L = L0 cosθ.

Question 5. A certain luminous surface obeys Lambert's law. Its luminance is equal to L. Find: (a) the luminous flux emitted by an element ΔS of this surface into a cone whose axis is normal to the given element and whose aperture angle is equal to θ; (b) the luminosity of such a source.

Solution. For a Lambert source L = constant. The flux emitted into the cone is Φ = ∫L ΔS cos α dΩ = L ΔS ∫0θ 2π cos α sin α dα = πL ΔS (1 − cos²θ) = πL ΔS sin²θ.

(b) The luminosity follows by putting θ = 90°: M = Φ(θ = 90°)/ΔS = πL.

Answers: (a) Φ = πL ΔS sin²θ; (b) M = πL.

Teacher's Note: Integrate L cosα dΩ over the cone; luminosity is the θ = 90° case.

Exam Note: Remember M = πL for Lambert sources.

Question 6. An illuminant shaped as a plane horizontal disc S = 100 cm² in area is suspended over the centre of a round table of radius R = 1.0 m. Its luminance does not depend on direction and is equal to L = 1.6×104 cd/m². At what height over the table should the illuminant be suspended to provide maximum illuminance at the circumference of the table? How great will that illuminance be? The illuminant is assumed to be a point source.

Solution. The equivalent luminous intensity in the direction OP (making angle θ with the vertical) is LS cos θ. The illuminance at the edge point P is E = (LS cos θ/(R² + h²)) cos θ = LS h²/(R² + h²)², since cos θ = h/√(R² + h²). Writing this as LS/(R²/h + h)², the denominator is smallest when R²/h + h is least, i.e. when h = R. (Equivalently, d/dh of h²/(R² + h²)² = 0 gives h = R.) Then the maximum illuminance is Emax = LS/(4R²) = (1.6×104 × 0.01)/4 = 40 lx.

Answers: h = R = 1.0 m; Emax = 40 lx. (Figure: lamp at height h above table centre, angle θ at the lamp between the vertical and the ray to the table edge P at distance R.)

Teacher's Note: Intensity LS cosθ, inverse-square plus cosθ for the surface; maximise over h.

Exam Note: Show the maximisation clearly; answer h = R.

Question 7. A point source is suspended at a height h = 1.0 m over the centre of a round table of radius R = 1.0 m. The luminous intensity I of the source depends on direction so that illuminance at all points of the table is the same. Find the function I(θ), where θ is the angle between the radiation direction and the vertical, as well as the luminous flux reaching the table if I(0) = I0 = 100 cd.

Solution. The illuminance at a point P at distance x from the table centre is EP = (I(θ)/(x² + h²)) cos θ = I(θ) cos³θ/h², because x² + h² = h²/cos²θ. For this to be the same at every x we need I(θ) cos³θ = constant = I0 (value at θ = 0). Hence I(θ) = I0/cos³θ.

The illuminance is E = I0/h² everywhere, so the flux reaching the table is Φ = πR² · I0/h² = π × 100 = 314 lm.

Answers: I(θ) = I0/cos³θ; Φ = 314 lm.

Teacher's Note: Uniform E forces I(θ)cos³θ constant; flux = E × table area.

Exam Note: Use x² + h² = h²/cos²θ to reach cos³θ.

Question 8. A vertical shaft of light from a projector forms a light spot S = 100 cm² in area on the ceiling of a round room of radius R = 2.0 m. The illuminance of the spot is equal to E = 1000 lx. The reflection coefficient of the ceiling is equal to ρ = 0.80. Find the maximum illuminance of the wall produced by the light reflected from the ceiling. The reflection is assumed to obey Lambert's law.

Solution. The illuminated spot acts as a Lambert source of luminosity M = πL, where MS = ρES is the total reflected light. Thus the luminance is L = ρE/π. The equivalent luminous intensity in a direction making angle θ with the vertical is LS cos θ = (ρES/π) cos θ. A point P on the wall (at the foot of the wall) lies at distance R/sin θ from the spot, and the ray meets the wall at an angle whose cosine is sin θ. So the illuminance at P is EP = (ρES/π) cos θ · sin θ · sin²θ/R² = (ρES/(πR²)) cos θ sin³θ.

This is maximum when d/dθ (cos θ sin³θ) = −sin⁴θ + 3 sin²θ cos²θ = 0, i.e. tan²θ = 3, tan θ = √3, θ = 60°. Then cos θ sin³θ = ½ × (3√3/8) = 3√3/16, so Emax = (3√3/(16π)) ρES/R². This occurs at a distance R cot θ = R/√3 below the ceiling. Substituting ρES = 0.80 × 1000 × 0.01 = 8 lm and R² = 4 m²: Emax = 0.21 lx.

Answer: Emax = (3√3/16π) ρES/R² ≈ 0.21 lx.

Teacher's Note: Treat the spot as a Lambert source, then maximise cosθ sin³θ over the wall height.

Exam Note: Condition tanθ = √3 earns the key mark.

Question 9. A luminous dome shaped as a hemisphere rests on a horizontal plane. Its luminosity is uniform. Determine the illuminance at the centre of that plane if its luminance equals L and is independent of direction.

Solution. The flux emitted in the radial direction by an element dS of the dome is dΦ = L dS dΩ cos θ, where the solid angle dΩ = dA cos θ/R² for an area dA on the plane at the centre O, and θ is the angle from the vertical. Then dΦ = (L dS dA/R²) cos θ. The illuminance at O is E = ∫dΦ/dA = ∫0π/2 (L/R²) 2πR² sin θ cos θ dθ = 2πL ∫01 x dx = πL, with x = sin θ.

Answer: E = πL. (Figure: hemispherical dome with centre O on the plane; ray from a dome element to O at angle θ to the vertical.)

Teacher's Note: Ring of dome at angle θ has area 2πR² sinθ dθ; integrate L cosθ dΩ.

Exam Note: Final result πL; show the sinθ cosθ integral.

Question 10. A Lambert source has the form of an infinite plane. Its luminance is equal to L. Find the illuminance of an area element oriented parallel to the given source.

Solution. Consider an element dS of the source plane at P and an element dA at O, at perpendicular distance h, with the line PO making angle θ with the normal. The flux from dS towards dA is dΦ = L dS dΩ cos θ = L dS (dA cos θ/(h² sec²θ)) cos θ = (L dS dA/h²) cos⁴θ. The total illuminance at O is E = ∫(L dS/h²) cos⁴θ. Here dS = 2πr dr = 2πh² sec²θ tan θ dθ. Substituting: E = 2πL ∫0π/2 sin θ cos θ dθ = πL.

Answer: E = πL.

Teacher's Note: Integrate cos⁴θ over rings of the source plane: dS = 2πh² sec²θ tanθ dθ.

Exam Note: Same result πL as the dome; mention it.

Question 11. An illuminant shaped as a plane horizontal disc of radius R = 25 cm is suspended over a table at a height h = 75 cm. The illuminance of the table below the centre of the illuminant is equal to E0 = 70 lx. Assuming the source to obey Lambert's law, find its luminosity.

Solution. Consider an annular element of the disc, 2πx dx = 2πh² tan θ sec²θ dθ, where θ is the angle at the table point below the centre. The light it sends there is dΦ = L dΩ (2πh² tan θ sec²θ dθ) cos θ, which leads to E0 = ∫0α 2πL sin θ cos θ dθ = πL sin²α, where sin α = R/√(h² + R²). Using luminosity M = πL: E0 = M sin²α = M R²/(h² + R²). Hence M = E0(1 + h²/R²) = 70 × (1 + 9) = 700 lm/m².

Answer: M = E0(1 + h²/R²) = 700 lm/m².

Teacher's Note: Disc below Lambert law: E0 = M sin²α, with sinα = R/√(R²+h²).

Exam Note: Check units: lux equals lm/m².

Question 12. A small lamp having the form of a uniformly luminous sphere of radius R = 6.0 cm is suspended at a height h = 3.0 m above the floor. The luminance of the lamp is equal to L = 2.0×104 cd/m² and is independent of direction. Find the illuminance of the floor directly below the lamp.

Solution. Let O be the floor point below the lamp centre. A surface element dS = 2πR² sin α dα of the sphere (α measured from the downward vertical through the centre) sends towards O the flux dΦ = L dS dΩ cos(α + β), where β is the angle at O between the vertical and the line OA, and cos(α + β) = (h cos α − R)/OA. Here OA = (h² + R² − 2hR cos α)1/2 and cos β = (h − R cos α)/OA. For a small area dΣ at O, dΩ = dΣ cos β/OA². Hence E = ∫L 2πR² sin α dα (h cos α − R)(h − R cos α)/(OA)⁴.

The limit of α runs from 0 to the value for which α + β = 90° (tangential emission): αmax = cos⁻¹(R/h). Put y = h² + R² − 2hR cos α, dy = 2hR sin α dα. The integral becomes E = (πL/(4h²)) ∫ [(h² − R²)²/y² − 1] dy from y = (h − R)² to y = h² − R², which equals (πL/(4h²)) [−(h² − R²)²/y − y] between these limits = (πL/(4h²)) [(h + R)² + (h − R)² − 2(h² − R²)] = (πL/(4h²)) · 4R² = πLR²/h². Substituting: E = π × 2.0×104 × (0.06)²/9 = 25.1 lx.

Answer: E = πLR²/h² = 25 lx.

Teacher's Note: A uniform-luminance sphere acts like a Lambert point source of luminosity πL.

Exam Note: Mention the tangent limit αmax = cos⁻¹(R/h).

Question 13. Write the law of reflection of a light beam from a mirror in vector form, using the directing unit vectors e and e′ of the incident and reflected beams and the unit vector n of the outside normal to the mirror surface.

Solution. By the law of reflection, the component of the incident unit vector e along n changes sign on reflection, while the component parallel to the mirror remains unchanged. Write e = e∥ + e⊥, where e⊥ = n(e·n) and e∥ = e − n(e·n). The reflected unit vector is e′ = e∥ − e⊥ = e − 2n(e·n).

Answer: e′ = e − 2n(n·e).

Teacher's Note: Flip only the normal component of e.

Exam Note: Final form e' = e - 2n(n.e) is the answer.

Question 14. Demonstrate that a light beam reflected from three mutually perpendicular plane mirrors in succession reverses its direction.

Solution. Choose the unit vectors perpendicular to the mirrors as the x, y, z axes. After reflection from the mirror with normal along x: e′ = e − 2i(i·e) = −exi + eyj + ezk. After a second reflection from the mirror with normal along y: e″ = e′ − 2j(j·e′) = −exi − eyj + ezk. After the third reflection: e‴ = −exi − eyj − ezk = −e.

So the beam is reversed (a corner-cube reflector).

Teacher's Note: Each mirror flips one Cartesian component of the direction vector.

Exam Note: Use the Q.13 vector law, one axis per mirror.

Question 15. At what value of the angle of incidence θ1 is a shaft of light reflected from the surface of water perpendicular to the refracted shaft?

Solution. Let n be the refractive index of water, θ1 the angle of incidence and θ2 the angle of refraction. The reflected and refracted rays are perpendicular, and the reflected ray makes angle θ1 with the normal, so θ1 + θ2 = π/2, i.e. θ2 = π/2 − θ1. Snell's law gives n = sin θ1/sin θ2 = sin θ1/sin(π/2 − θ1) = tan θ1. Hence θ1 = tan⁻¹ n.

Answer: θ1 = tan⁻¹ n (Brewster's angle; about 53° for water, n = 1.33).

Teacher's Note: Reflected ⟂ refracted gives θ1 + θ2 = 90°, so n = tanθ1.

Exam Note: Quote tanθ1 = n; this is Brewster's law.

Question 16. Two optical media have a plane boundary between them. Suppose θ1cr is the critical angle of incidence of a beam and θ1 is the angle of incidence at which the refracted beam is perpendicular to the reflected one (the beam is assumed to come from an optically denser medium). Find the relative refractive index of these media if sin θ1cr/sin θ1 = η = 1.28.

Solution. Let the two media have refractive indices n1 and n2 with n1 > n2. At the critical angle of incidence, Snell's law gives n1 sin θ1cr = n2 (1). At angle of incidence θ1, n1 sin θ1 = n2 sin θ2, but the reflected and refracted beams are perpendicular, so θ2 = π/2 − θ1 and n1 sin θ1 = n2 cos θ1 (2). Dividing (1) by (2): sin θ1cr/sin θ1 = 1/cos θ1, so η = 1/cos θ1, cos θ1 = 1/η and sin θ1 = √(η² − 1)/η (3). But n1/n2 = cos θ1/sin θ1 = (1/η)(η/√(η² − 1)) = 1/√(η² − 1).

Answer: n1/n2 = 1/√(η² − 1) = 1.25, i.e. the relative index of the rarer to the denser medium is n2/n1 = √(η² − 1) = 0.80. (Figure: ray in medium n1 meeting boundary PQ at the critical angle, refracted ray grazing along the boundary.)

Teacher's Note: Use critical-angle and perpendicular-ray conditions together, then divide the equations.

Exam Note: State clearly whether you give n1/n2 or n2/n1.

Question 17. A light beam falls upon a plane-parallel glass plate d = 6.0 cm in thickness. The angle of incidence is θ = 60°. Find the value of deflection of the beam which passed through that plate.

Solution. From the figure, the lateral shift is x = OM sin(θ − β) = d sec β sin(θ − β) = d sec β (sin θ cos β − cos θ sin β) = d(sin θ − cos θ tan β) (1), where β is the angle of refraction in the plate. From the law of refraction sin θ = n sin β, so sin β = sin θ/n, cos β = √(n² − sin²θ)/n and tan β = sin θ/√(n² − sin²θ). Thus x = d(sin θ − cos θ sin θ/√(n² − sin²θ)) = d sin θ [1 − √((1 − sin²θ)/(n² − sin²θ))].

Numerical value (the statement does not give n; taking n = 1.5 for glass): x = 6.0 × 0.866 × [1 − √(0.25/1.5)] = 5.196 × 0.592 ≈ 3.1 cm.

Answer: x = d sin θ [1 − √((1 − sin²θ)/(n² − sin²θ))] ≈ 3.1 cm for n = 1.5.

Teacher's Note: Lateral shift of a slab: x = d(sinθ − cosθ tanβ), with sinθ = n sinβ.

Exam Note: Numerical answer needs n; state n = 1.5 assumed.

Question 18. A man standing on the edge of a swimming pool looks at a stone lying on the bottom. The depth of the swimming pool is equal to h. At what distance from the surface of water is the image of the stone formed if the line of vision makes an angle θ with the normal to the surface?

Solution. Consider two neighbouring rays from the stone at O that emerge at points M and N of the surface, with angles of incidence α and α + dα in water and angles θ and θ + dθ in air; MN is small. From the figure, dα ≈ MN cos²α/h (1) and similarly dθ = MN cos²θ/h′ (2), where h′ is the apparent depth (the image is where the backward-extended emerging rays meet). From (1) and (2): dα/dθ = h′ cos²α/(h cos²θ), so h′ = (h cos²θ/cos²α)(dα/dθ) (3). Snell's law n sin α = sin θ (A) gives cos α = √(n² − sin²θ)/n (B), and differentiating, n cos α dα = cos θ dθ, so dα/dθ = cos θ/(n cos α) (4). Using (4) in (3): h′ = h cos³θ/(n cos³α). Hence with (B), h′ = n² h cos³θ/(n² − sin²θ)3/2.

Answer: h′ = n² h cos³θ/(n² − sin²θ)3/2 (reduces to h/n for normal viewing, θ = 0). (Figure: stone O at depth h, rays ON and OM leaving the surface, the backward extensions meeting at depth h′.)

Teacher's Note: Image position is where neighbouring refracted rays diverge from; differentiate Snell's law.

Exam Note: Check the θ = 0 limit gives h/n.

Question 19. Demonstrate that in a prism with small refracting angle θ the shaft of light deviates through the angle α ≈ (n − 1)θ regardless of the angle of incidence, provided that the latter is also small.

Solution. Consider a monochromatic ray through the prism in air. Let α1, α2 be the angles of incidence and emergence and β1, β2 the angles of refraction inside at the two faces. From the figure, θ = β1 + β2 (A) and the deviation α = (α1 + α2) − (β1 + β2) = (α1 + α2) − θ (1). Snell's law: sin α1 = n sin β1, so α1 = nβ1 for small angles (2); sin α2 = n sin β2, so α2 = nβ2 (3). From (1), (2) and (3): α = n(β1 + β2) − θ = nθ − θ = (n − 1)θ, using (A).

Hence α ≈ (n − 1)θ, independent of the angle of incidence.

Teacher's Note: For small angles replace sines by angles; deviation = nθ − θ.

Exam Note: Show θ = β1 + β2 and deviation sum.

Question 20. A shaft of light passes through a prism with refracting angle θ and refractive index n. Let α be the diffraction angle of the shaft. Demonstrate that if the shaft of light passes through the prism symmetrically, (a) the angle α is the least; (b) the relationship between the angles α and θ is defined by Eq. (5.1e), sin((α + θ)/2) = n sin(θ/2).

Solution. (a) In general α = (α1 + α2) − θ (1). Snell's law gives α1 = sin⁻¹(n sin β1) and α2 = sin⁻¹(n sin β2) = sin⁻¹[n sin(θ − β1)] since θ = β1 + β2 (2). So α = [sin⁻¹(n sin β1) + sin⁻¹(n sin(θ − β1))] − θ. For α to be an extremum, dα/dβ1 = 0: n cos β1/√(1 − n² sin²β1) − n cos(θ − β1)/√(1 − n² sin²(θ − β1)) = 0, i.e. cos²β1/(1 − n² sin²β1) = cos²(θ − β1)/(1 − n² sin²(θ − β1)). Cross-multiplying and using cos² = 1 − sin²: 1 − n² sin²(θ − β1) − sin²β1 + n² sin²β1 sin²(θ − β1) = 1 − n² sin²β1 − sin²(θ − β1) + n² sin²β1 sin²(θ − β1). Hence sin²(θ − β1)(1 − n²) = sin²β1(1 − n²), so θ − β1 = β1, i.e. β1 = θ/2 and β2 = θ/2 = β1. This is the symmetric passage of the ray, where the deviation is stationary (and it is a minimum).

(b) For symmetric passage α1 = α2 = α′ and β1 = β2 = β = θ/2. The total deviation is α = 2α′ − θ, so α′ = (α + θ)/2 (1). Snell's law sin α′ = n sin β gives sin((α + θ)/2) = n sin(θ/2).

Teacher's Note: Set dα/dβ1 = 0 to get β1 = β2 = θ/2; then apply Snell's law at one face.

Exam Note: Marks: symmetric condition, then sin((α+θ)/2) = n sin(θ/2).

Question 21. The least deflection angle of a certain glass prism is equal to its refracting angle. Find the latter.

Solution. For least deflection, sin((α + θ)/2) = n sin(θ/2) (see the solution of 5.20). Here α = θ, so sin θ = n sin(θ/2), i.e. 2 sin(θ/2) cos(θ/2) = n sin(θ/2). Hence cos(θ/2) = n/2, and θ = 2 cos⁻¹(n/2) = 83°, where n = 1.5.

Answer: θ = 2 cos⁻¹(n/2) ≈ 83° (taking n = 1.5 for glass).

Teacher's Note: Substitute α = θ in the minimum-deviation relation; the sin(θ/2) cancels.

Exam Note: State that n = 1.5 is assumed for glass.

Question 22. Find the minimum and maximum deflection angles for a light ray passing through a glass prism with refracting angle θ = 60°.

Solution. Minimum deviation: sin((α + θ)/2) = n sin(θ/2), so αmin = 2 sin⁻¹(n sin(θ/2)) − θ = 37°, for n = 1.5.

Maximum deviation occurs for grazing incidence (angle of incidence 90° on the first face). Corrected: the printed working (α = π − θ = π − 2θcr) assumes grazing emergence as well, which is impossible for θ = 60° (it needs θ = 2θcr = 83.6°), and its formula would give 96°, not the quoted 58°. Correct working: at grazing incidence the refraction angle inside is the critical angle, β1 = sin⁻¹(1/n) = 41.8°. Then β2 = θ − β1 = 18.2°, and sin α2 = n sin β2 = 0.468, α2 = 27.9°. The deviation is αmax = 90° + 27.9° − 60° = 57.9° ≈ 58°, as printed.

Answers: αmin = 37°, αmax ≈ 58° (n = 1.5).

Teacher's Note: Maximum deviation is at grazing incidence: use critical angle inside, then Snell at the exit face.

Exam Note: Both answers need n = 1.5 stated.

Question 23. A trihedral prism with refracting angle 60° provides the least deflection angle 37° in air. Find the least deflection angle of that prism in water.

Solution. The least deflection angle is δ = 2α − θ, where α is the angle of incidence at the first surface and θ is the prism angle. By Snell's law n1 sin α = n2 sin(θ/2), as the angle of refraction at the first surface equals half the prism angle for least deflection. So sin α = (n2/n1) sin(θ/2) = (1.5/1.33) sin 30° = 0.5639, hence α = sin⁻¹(0.5639) = 34.33°, and δ = 2α − θ = 8.65°.

Answer: δ ≈ 8.65° ≈ 8.7°. (The glass index 1.5 follows from 37° in air: n = sin 48.5°/sin 30° = 1.5.)

Teacher's Note: In water use relative index n_glass/n_water in the minimum-deviation relation.

Exam Note: Get n of glass from the air case first.

Question 24. A light ray composed of two monochromatic components passes through a trihedral prism with refracting angle θ = 60°. Find the angle Δα between the components of the ray after its passage through the prism if their respective indices of refraction are equal to 1.515 and 1.520. The prism is oriented to provide the least deflection angle.

Solution. The refractive index of a medium depends on the wavelength, n = f(λ). For least deviation of a monochromatic ray, n sin(θ/2) = sin((α + θ)/2) (1). So n = n(α) and Δn = (dn/dα) Δα (2). Differentiating (1): dn sin(θ/2) = ½ cos((α + θ)/2) dα, so dn/dα = cos((α + θ)/2)/(2 sin(θ/2)) (3). Hence Δn = [cos((α + θ)/2)/(2 sin(θ/2))] Δα = [√(1 − sin²((α + θ)/2))/(2 sin(θ/2))] Δα = [√(1 − n² sin²(θ/2))/(2 sin(θ/2))] Δα, using (1). Thus Δα = 2 sin(θ/2) Δn/√(1 − n² sin²(θ/2)) = 0.44°.

Answer: Δα = 2 sin(θ/2) Δn/√(1 − n² sin²(θ/2)) ≈ 0.44° (with n ≈ 1.5175, Δn = 0.005; check: 1.0 × 0.005/0.651 = 7.7×10−3 rad = 0.44°).

Teacher's Note: Differentiate n sin(θ/2) = sin((α+θ)/2) to relate Δα to Δn.

Exam Note: Convert radians to degrees at the end.

Question 25. Using Fermat's principle derive the laws of reflection and refraction of light on the plane interface between two media.

Solution. Fermat's principle: the actual path of a light ray is the path that light can follow in the least time compared with all other hypothetical paths between the same two points.

Law of refraction. Let the plane S be the interface between medium 1 and medium 2 with refractive indices n1 = c/v1 and n2 = c/v2. Two points are given: A above S and B below S. Drop perpendiculars AA1 = h1 and BB1 = h2 to S, with A1B1 = l. The quickest path consists of two straight lines AO in medium 1 and OB in medium 2, where the point O in the plane S must be found.

First, O must lie on the intersection of S with the plane P perpendicular to S and passing through A and B. Indeed, suppose O were a point O1 not in P; drop the perpendicular O1O2 onto P. Since AO2 < AO1 and BO2 < BO1, the time needed to traverse AO2B is less than that for AO1B. So the incident and refracted rays lie in the same plane as the normal to the interface (the plane of incidence).

Now consider the rays in the plane of incidence. Let A1O = x and OB1 = l − x. The time from A to O to B is T = AO/v1 + OB/v2 = √(h1² + x²)/v1 + √(h2² + (l − x)²)/v2 (1). The value of x must minimise T, so dT/dx = x/(v1√(h1² + x²)) − (l − x)/(v2√(h2² + (l − x)²)) = 0 (2). With x/√(h1² + x²) = sin α and (l − x)/√(h2² + (l − x)²) = sin β, this gives sin α/v1 − sin β/v2 = 0, i.e. sin α/sin β = v1/v2 = (c/n1)/(c/n2) = n2/n1.

Law of reflection (not printed in the source; added for completeness). If both A and B are in the same medium and the ray touches S at O, the time is proportional to AO + OB = √(h1² + x²) + √(h2² + (l − x)²). Setting the derivative to zero gives sin α = sin β, so the angle of reflection equals the angle of incidence; the same perpendicular-plane argument puts the reflected ray in the plane of incidence.

Teacher's Note: Minimise travel time over the crossing point; dT/dx = 0 gives Snell's law.

Exam Note: State the plane-of-incidence step and the derivative condition.

Question 26. By means of plotting find: (a) the path of a light ray after reflection from a concave and convex spherical mirrors (see Fig. 5.4, where F is the focal point, OO′ is the optical axis); (b) the positions of the mirror and its focal point in the cases illustrated in Fig. 5.5, where P and P′ are the conjugate points.

Solution. (a) Draw the focal plane through F perpendicular to the axis. Extend the incident ray (for a convex mirror, its extension beyond the mirror) until it meets the focal plane at a point Q. Join Q to the pole O of the mirror; a ray travelling along QO is reflected symmetrically about the axis (it makes the same angle α with the axis). All rays parallel to the incident ray pass through Q (concave mirror) or appear to come from Q (convex mirror), so after reflection they are parallel to the reflected ray of QO. Hence the actual reflected ray is the line through the point of incidence parallel to the symmetric ray. For the concave mirror this reflected ray goes on towards the axis; for the convex mirror it diverges, its backward extension passing through the corresponding point of the focal plane behind the mirror.

(b) Case (a) of Fig. 5.5: P and P′ lie on opposite sides of the axis, so the image is real and inverted and the mirror is concave. Look for a point O′ on the axis such that O′P and O′P′ make equal angles with the axis; this fixes the position of the mirror (its pole). Draw a ray from P parallel to the axis; on reflection it must pass through P′. Its intersection with the principal axis is the focus F.

Case (b) of Fig. 5.5: P′ is the image of P, virtual, erect and smaller (nearer the axis), so the mirror is convex. Look for a point X on the axis (between the feet of P and P′) such that PX and P′X make equal angles with the axis; X is the pole. A ray from P parallel to the axis is reflected so that its backward extension passes through P′; this extension meets the axis at the focal point F behind the mirror.

(The constructions are described in words; the diagrams depend on the plotted positions of P and P′ in Figs. 5.4 and 5.5.)

Teacher's Note: Rays through one focal-plane point become parallel after reflection; equal angles at the pole locate the mirror.

Exam Note: Draw construction lines neatly; justify concave versus convex.

Question 27. Determine the focal length of a concave mirror if: (a) with the distance between an object and its image being equal to l = 15 cm, the transverse magnification β = −2.0; (b) in a certain position of the object the transverse magnification is β1 = −0.50 and in another position displaced with respect to the former by a distance l = 5.0 cm the transverse magnification β2 = −0.25.

Solution. (a) From the mirror formula 1/s′ + 1/s = 1/f we get f = s′s/(s′ + s) (1). Writing the conditions of the problem (distance between object and image l, and s′/s = β), eliminating s and s′ and substituting in (1) gives f = lβ/(1 − β²) = 15 × (−2)/(1 − 4) = 10 cm in magnitude. In the book's sign convention (concave mirror: f negative) f = −10 cm. Corrected: the intermediate expressions for s and s′ printed in the source are inconsistent with each other, so the working below is given instead. With real-image distances u (object) and v (image) on the same side: |β| = v/u = 2 gives v = 2u, and v − u = 15 cm gives u = 15 cm, v = 30 cm; then 1/f = 1/15 + 1/30 = 1/10, so |f| = 10 cm.

(b) 1/s′ + 1/s = 1/f gives s/s′ + 1 = s/f, so 1/β1 = s/f − 1 = (s − f)/f, i.e. β1 = f/(s − f) (2). For smaller |β| the object must be farther from the mirror, so the second position is displaced away: β2 = f/(s + l − f) (3). Eliminating s from (2) and (3): f = lβ1β2/(β2 − β1) = 5 × 0.125/0.25 = 2.5 cm in magnitude (−2.5 cm in the book's convention). Check: |β| = f/(u − f) gives u = 3f for β = 0.50 and u = 5f for β = 0.25, so 2f = 5 cm, f = 2.5 cm.

Answers: (a) |f| = 10 cm; (b) |f| = 2.5 cm (printed as −10 cm and −2.5 cm in the book's sign convention).

Teacher's Note: Real inverted image: β = f/(s − f); for (b) eliminate s between two positions.

Exam Note: Signs: f is negative for concave in this convention.

Question 28. A point source with luminous intensity I0 = 100 cd is positioned at a distance s = 20.0 cm from the crest of a concave mirror with focal length f = 25.0 cm. Find the luminous intensity of the reflected ray if the reflection coefficient of the mirror is ρ = 0.80.

Solution. For a concave mirror 1/s′ + 1/s = 1/f, so s′ = sf/(s − f) (in the coordinate convention s is negative and f = −|f| is also negative). If A is the area of the mirror (assumed small) and the object is on the principal axis, the light incident on the mirror per second is I0A/s², since A/s² is the solid angle subtended by the mirror at the source. A fraction ρ is reflected, so if I is the luminous intensity of the image, I A/s′² = ρ I0 A/s². Hence I = ρ I0 (|f|/(|f| − s))² (because the book's convention makes f negative for a concave mirror, |f| must be written). Substituting: I = 0.80 × 100 × (25/5)² = 2.0×10³ cd.

Answer: I = 2.0×10³ cd.

Teacher's Note: Reflected flux ρ times incident flux, then divide by the image's solid angle.

Exam Note: Source is inside the focus, so the image is virtual.

Question 29. Proceeding from Fermat's principle derive the refraction formula for paraxial rays on a spherical boundary surface of radius R between media with refractive indices n and n′.

Solution. For O1 to be the image of O, the optical paths of all rays OAO1 must be equal up to terms of leading order in h. Thus n1·OA + n2·AO1 = constant. Here OP = |s| and O1P = |s′|, so OA = √(h² + (|s| + δ)²) ≈ |s| + δ + h²/(2|s|) and O1A = √(h² + (|s′| − δ)²) ≈ |s′| − δ + h²/(2|s′|) (neglecting products h²δ), where δ = PM is the sag of the surface at height h. Then n1|s| + n2|s′| + n1δ − n2δ + (h²/2)(n1/|s| + n2/|s′|) = constant.

Now (r − δ)² + h² = r², so h² = 2rδ and δ = h²/(2r), where r = CP is the radius of curvature. Hence n1|s| + n2|s′| + (h²/2){(n1 − n2)/r + n1/|s| + n2/|s′|} = constant. Since this must hold for all h, n2/|s′| + n1/|s| = (n2 − n1)/r. With the sign convention (s′ > 0, s < 0): n2/s′ − n1/s = (n2 − n1)/r.

With n1 = n and n2 = n′ this is n′/s′ − n/s = (n′ − n)/R. (Figure: object O and image O1 on the axis, ray hitting the surface at A at height h, centre of curvature C, vertex P.)

Teacher's Note: Equal optical paths for all paraxial rays; expand to order h² and set its coefficient to zero.

Exam Note: Sag δ = h²/2r is the key step.

Question 30. A parallel beam of light falls from vacuum on a surface enclosing a medium with refractive index n (Fig. 5.6). Find the shape of that surface, x(r), if the beam is brought into focus at the point F at a distance f from the crest O. What is the maximum radius of a beam that can still be focussed?

Solution. All rays focusing at a point must have traversed the same optical path. For a ray at distance r from the axis meeting the surface at P (at depth x from the plane through the crest O), the path in vacuum is x and in the medium is n·PF, so x + n√(r² + (f − x)²) = nf, or (nf − x)² = n²r² + n²(f − x)². Then n²r² = (nf − x)² − [n(f − x)]² = (nf − x + nf − nx)(nf − x − nf + nx) = x(n − 1)(2nf − (n + 1)x) = 2n(n − 1)fx − (n + 1)(n − 1)x². Thus (n + 1)(n − 1)x² − 2n(n − 1)fx + n²r² = 0, so x = [n(n − 1)f ± √(n²(n − 1)²f² − n²r²(n + 1)(n − 1))]/((n + 1)(n − 1)) = (nf/(n + 1))[1 ± √(1 − ((n + 1)/(n − 1)) r²/f²)].

The ray must move forward, so x < f; for the + sign x > f for small r, so the − sign is taken (also x → 0 as r → 0). Hence x = (nf/(n + 1))[1 − √(1 − ((n + 1)/(n − 1)) r²/f²)] (the surface is an ellipsoid). The expression under the radical must be non-negative; the limiting case (A) 1 − ((n + 1)/(n − 1)) r²/f² = 0 gives the maximum radius: rmax = f√((n − 1)/(n + 1)).

Answers: x = (nf/(n + 1))[1 − √(1 − ((n + 1)/(n − 1)) r²/f²)]; rmax = f√((n − 1)/(n + 1)).

Teacher's Note: Equal optical paths (Fermat) give a quadratic in x, an ellipse.

Exam Note: Choose the minus root: x→0 as r→0.

Question 31. A point source is located at a distance of 20 cm from the front surface of a symmetrical glass biconvex lens. The lens is 5.0 cm thick and the curvature radius of its surfaces is 5.0 cm. How far beyond the rear surface of this lens is the image of the source formed?

Solution. As the lens has significant thickness, the thin-lens formula cannot be used. For refraction at the front surface, n′/s′ − n/s = (n′ − n)/R: 1.5/s′ − 1/(−20) = (1.5 − 1)/5, which gives s′ = 30 cm. Thus the image produced by the front surface behaves as a virtual source for the rear surface at a distance 25 cm from it, because the lens is 5 cm thick. Again from the refraction formula at the curved rear surface: 1/s′ − 1.5/25 = (1 − 1.5)/(−5), which gives s′ = +6.25 cm.

Thus we get a real image at a distance 6.25 cm beyond the rear surface.

Answer: 6.25 cm (taking n = 1.5 for glass).

Teacher's Note: Refract surface by surface; first image becomes a virtual object for the rear face.

Exam Note: Thick lens: never use the thin-lens formula.

JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 27 Photometry And Geometrical Optics Part 1

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 27 Photometry And Geometrical Optics Part 1 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with IE Irodov Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.