IE Irodov Solutions Chapter 24 Electric Oscillations Part 1

Step-by-Step IE Irodov Solutions for JEE Physics Chapter 24 Electric Oscillations

Explore reliable textbook solutions for Chapter 24 Electric Oscillations tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 24 Electric Oscillations Textbook Solutions PDF

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Electric Oscillations - Questions 94 to 122

Electric Oscillations

Question 94. Due to a certain cause the free electrons in a plane copper plate shifted over a small distance x at right angles to its surface. As a result, a surface charge and a corresponding restoring force emerged, giving rise to so-called plasma oscillations. Find the angular frequency of these oscillations if the free electron concentration in copper is n = 0.85·1029 m-3.

Solution. If the electrons (charge of each electron = −e) are shifted by the same distance x, a net positive charge density (per unit area) σ = nex is induced on the surface. This results in an electric field E = nex/ε0 in the direction of x and a restoring force on an electron of −ne2x/ε0.

Thus m ẍ = −ne2x/ε0, or ẍ + (ne2/mε0) x = 0.

This gives ωp = √(ne2/mε0) = 1.645 × 1016 s-1, the plasma frequency for the problem.

Teacher's Note: Surface charge makes a uniform field E = nex/ε0, giving a linear restoring force, hence SHM.

Exam Note: Show the force law, then the formula; substitute numbers carefully.

Question 95. An oscillating circuit consisting of a capacitor with capacitance C and a coil of inductance L maintains free undamped oscillations with voltage amplitude across the capacitor equal to Vm. For an arbitrary moment of time find the relation between the current I in the circuit and the voltage V across the capacitor. Solve this problem using Ohm's law and then the energy conservation law.

Solution. Since there are no sources of emf in the circuit, Ohm's law reads q/C = −L dI/dt, where q is the charge on the capacitor and I = dq/dt is the current through the coil. Then

d2q/dt2 + ω02q = 0, ω02 = 1/LC.

The solution of this equation is q = qm cos(ω0t + α). From the problem Vm = qm/C. Then

I = −ω0CVm sin(ω0t + α) and V = Vm cos(ω0t + α),

so V2 + I2/(ω02C2) = Vm2, or V2 + LI2/C = Vm2.

By energy conservation: ½LI2 + q2/2C = constant. When the potential difference across the capacitor takes its maximum value Vm, the current I must be zero. Thus the constant = ½CVm2. Hence LI2/C + V2 = Vm2 once again.

Teacher's Note: Both methods give the same ellipse relation; at V = Vm the current is zero.

Exam Note: Name both methods; give final relation.

Question 96. An oscillating circuit consists of a capacitor with capacitance C, a coil of inductance L with negligible resistance, and a switch. With the switch disconnected, the capacitor was charged to a voltage Vm, and then at the moment t = 0 the switch was closed. Find: (a) the current I(t) in the circuit as a function of time; (b) the emf of self-inductance in the coil at the moments when the electric energy of the capacitor is equal to that of the current in the coil.

Solution. After the switch was closed, the circuit satisfies −L dI/dt = q/C, or d2q/dt2 + ω02q = 0, ω0 = 1/√(LC), so q = CVm cos ω0t, where we have used the fact that when the switch is closed V = q/C = Vm, I = dq/dt = 0 at t = 0.

(a) I = dq/dt = −CVmω0 sin ω0t = −Vm√(C/L) sin ω0t.

(b) The electrical energy of the capacitor is (qm2/2C) cos2ω0t and that of the inductor is ½LIm2 sin2ω0t. The two are equal when ω0t = π/4. At that instant the emf of self-inductance is −L dI/dt = Vm cos ω0t = Vm/√2.

Teacher's Note: Initial conditions V = Vm, I = 0 fix the phase; equal energies mean tan2ω0t = 1.

Exam Note: State initial conditions; note minus sign shows current direction.

Question 97. In an oscillating circuit consisting of a parallel-plate capacitor and an inductance coil with negligible active resistance the oscillations with energy W are sustained. The capacitor plates were slowly drawn apart to increase the oscillation frequency η-fold. What work was done in the process?

Solution. Corrected: the printed solution ends with A = (η2 − 1)W, which is wrong (it keeps qm fixed and uses twice the true force on a plate). The book's set-up is as follows: q = qm cos ωt, ω2 = 1/LC, C = ε0S/y, so ω2 = y/(ε0SL); an η-fold rise in ω needs y to change from y0 to η2y0. The correct working follows.

The field of one plate acting on the other is E/2, so the force on a plate is F = qE/2 = (q2/2ε0S) = (qm2/2ε0S) cos2ωt. The plates move slowly, so use the average over a period: F̄ = qm2/(4ε0S). The oscillation energy is W = qm2/2C = qm2y/(2ε0S), so F̄ = W/(2y).

The work done in a small displacement dy equals the change in oscillation energy: dW = F̄ dy = W dy/(2y), so dW/W = dy/(2y), i.e. W ∝ √y ∝ ω. Hence the final energy is ηW and the work done is

A = (η − 1)W.

Teacher's Note: Slow change keeps W/ω constant (adiabatic invariant), so energy grows η-fold; work equals the energy gain.

Exam Note: Printed answer wrong; correct is (η − 1)W.

Question 98. In an oscillating circuit shown in Fig. 4.27 the coil inductance is equal to L = 2.5 mH and the capacitors have capacitances C1 = 2.0 μF and C2 = 3.0 μF. The capacitors were charged to a voltage V = 180 V, and then the switch Sw was closed. Find: (a) the natural oscillation frequency; (b) the peak value of the current flowing through the coil.

C1C2SwL

Solution. The equations of the L-C circuit (I1, I2 are the currents from C1, C2; the coil carries I = I1 + I2) are

L d(I1 + I2)/dt = (C1V − ∫I1dt)/C1 = (C2V − ∫I2dt)/C2.

Differentiating again, L d2(I1 + I2)/dt2 = −I1/C1 = −I2/C2. Then I1 = C1I/(C1 + C2), I2 = C2I/(C1 + C2) (Corrected: the printed solution has C1 − C2 in the denominator of I1, a misprint), so

L(C1 + C2) Ï + I = 0, or I = I0 sin(ω0t + α), where

(a) ω02 = 1/[L(C1 + C2)], i.e. ω0 = 8.9 × 103 s-1 (ν = ω0/2π = 1.4 kHz, T = 2π/ω0 = 0.7 ms).

(b) At t = 0, I = 0 so α = 0 and I = I0 sin ω0t. The peak value I0 is related to V by the first equation: LI = V − ∫I dt/(C1 + C2), i.e. Lω0I0 cos ω0t = V + [I0/(ω0(C1 + C2))](cos ω0t − 1) (the P.D. across the inductance is V at t = 0). Hence

I0 = (C1 + C2)ω0V = V√[(C1 + C2)/L] = 8.05 A.

Teacher's Note: Capacitors charged to the same V behave as one capacitor C1 + C2 in parallel with the coil.

Exam Note: Add capacitances before using 1/√(LC); check numbers.

Question 99. An electric circuit shown in Fig. 4.28 has a negligibly small active resistance. The left-hand capacitor was charged to a voltage V0 and then at the moment t = 0 the switch Sw was closed. Find the time dependence of the voltages in left and right capacitors.

CCSwL

Solution. Initially q1 = CV0 and q2 = 0. After the switch is closed charge flows and we get

q1 + q2 = CV0 ... (1a), q1/C + L dI/dt − q2/C = 0 ... (1)

Also I = q̇1 = −q̇2. Thus LÏ + 2I/C = 0. Hence Ï + ω02I = 0, ω02 = 2/LC. The solution of this equation subject to I = 0 at t = 0 is I = I0 sin ω0t.

Integrating: q1 = A − (I0/ω0) cos ω0t, q2 = B + (I0/ω0) cos ω0t.

Finally substituting in (1): (A − B)/C − (2I0/ω0C) cos ω0t + LI0ω0 cos ω0t = 0. Thus A = B = CV0/2 and CV0/2 + I0/ω0 = 0. So

q1 = (CV0/2)(1 + cos ω0t), q2 = (CV0/2)(1 − cos ω0t).

Dividing by C, the voltages are V1 = (V0/2)(1 + cos ω0t) and V2 = (V0/2)(1 − cos ω0t), with ω0 = √(2/LC).

Teacher's Note: Two equal capacitors in series act as C/2, so ω0 = √(2/LC); total charge CV0 is conserved.

Exam Note: Convert charges to voltages by dividing by C; state ω0.

Question 100. An oscillating circuit consists of an inductance coil L and a capacitor with capacitance C. The resistance of the coil and the lead wires is negligible. The coil is placed in a permanent magnetic field so that the total flux passing through all the turns of the coil is equal to Φ. At the moment t = 0 the magnetic field was switched off. Assuming the switching off time to be negligible compared to the natural oscillation period of the circuit, find the circuit current as a function of time t.

Solution. The flux in the coil is Φ(t) = Φ for t < 0 and 0 for t > 0. The equation of the current is

−L dI/dt = (∫0t I dt)/C ... (1)

This means LC d2I/dt2 + I = 0, or with ω02 = 1/LC, I = I0 sin(ω0t + α).

Putting in (1): −LI0ω0 cos(ω0t + α) = −(I0/ω0C)[cos(ω0t + α) − cos α]. This implies cos α = 0, so I = ±I0 cos ω0t.

From Faraday's law ε = −dΦ/dt = −L dI/dt; integrating from t = −ε to +ε (ε → 0) gives Φ = LI0 with the + sign in I. So

I = (Φ/L) cos ω0t.

Teacher's Note: Flux linkage cannot change instantly in a sudden switch-off: the current jumps to Φ/L, with the capacitor uncharged.

Exam Note: Use Φ = LI at t = 0 as the initial condition.

Question 101. The free damped oscillations are maintained in a circuit, such that the voltage across the capacitor varies as V = Vme−βt cos ωt. Find the moments of time when the modulus of the voltage across the capacitor reaches (a) peak values; (b) maximum (extremum) values.

Solution. Given V = Vm e−βt cos ωt.

(a) The phrase 'peak values' is not clear. The answer is obtained on taking |cos ωt| = 1, i.e. t = πn/ω.

(b) For extrema dV/dt = 0, i.e. −β cos ωt − ω sin ωt = 0, or tan ωt = −β/ω, i.e. ωt = nπ + tan−1(−β/ω).

Teacher's Note: Peaks of the cosine factor differ from true extrema of V because the decay factor shifts them slightly.

Exam Note: Differentiate V and set zero for extrema; state both sets of times.

Question 102. A certain oscillating circuit consists of a capacitor with capacitance C, a coil with inductance L and active resistance R, and a switch. When the switch was disconnected, the capacitor was charged; then the switch was closed and oscillations set in. Find the ratio of the voltage across the capacitor to its peak value at the moment immediately after closing the switch.

Solution. The equation of the circuit is L d2Q/dt2 + R dQ/dt + Q/C = 0. This has the solution Q = Qme−βt sin(ωt + α), where β = R/2L, ω = √(ω02 − β2), ω02 = 1/LC.

Now I = dQ/dt = 0 at t = 0, so Qme−βt(−β sin(ωt + α) + ω cos(ωt + α)) = 0 at t = 0. Thus ω cos α = β sin α, or α = tan−1(ω/β).

Now Vm = Qm/C and V0 = P.D. at t = 0 = (Qm/C) sin α. Therefore

V0/Vm = sin α = ω/√(ω2 + β2) = ω/ω0 = √(1 − β2/ω02) = √(1 − R2C/4L).

Teacher's Note: Current is zero at t = 0 fixes the phase α; the voltage ratio is sin α = ω/ω0.

Exam Note: I = 0 at t = 0 gives α; then sin α.

Question 103. A circuit with capacitance C and inductance L generates free damped oscillations with current varying with time as I = Ime−βt sin ωt. Find the voltage across the capacitor as a function of time, and in particular, at the moment t = 0.

Solution. We write −dQ/dt = I = Ime−βt sin ωt = Im(Ime−βt + iωt) (Im means imaginary part). Then, integrating (Q = −∫I dt),

Q = Im[Im e−βt + iωt/(β − iω)] = Im[Im(β + iω)e−βt + iωt/(β2 + ω2)] = Ime−βt (β sin ωt + ω cos ωt)/(β2 + ω2) = Ime−βt sin(ωt + δ)/√(β2 + ω2), tan δ = ω/β.

(An arbitrary constant of integration has been put equal to zero.) Since β2 + ω2 = ω02 = 1/LC, thus

V = Q/C = Im√(L/C) e−βt sin(ωt + δ).

V(0) = Im√(L/C) sin δ = Im√(L/C) ω/√(ω2 + β2) = Im√[L/(C(1 + β2/ω2))].

Teacher's Note: Capacitor charge is the (negative) time integral of current; β2 + ω2 = 1/LC simplifies the amplitude.

Exam Note: Integrate with complex exponential; use ω02 = ω2 + β2.

Question 104. An oscillating circuit consists of a capacitor with capacitance C = 4.0 μF and a coil with inductance L = 2.0 mH and active resistance R = 10 Ω. Find the ratio of the energy of the coil's magnetic field to that of the capacitor's electric field at the moment when the current has the maximum value.

Solution. I = Ime−βt sin ωt, β = R/2L, ω0 = √(1/LC), ω = √(ω02 − β2). With I = −q̇, q = charge on the capacitor. Then q = Ime−βt sin(ωt + δ)/√(ω2 + β2), tan δ = ω/β.

Thus WM = ½LIm2e−2βt sin2ωt and WE = (Im2/2C)e−2βt sin2(ωt + δ)/(ω2 + β2) = (LIm2/2)e−2βt sin2(ωt + δ).

Current is maximum when d/dt(e−βt sin ωt) = 0, i.e. −β sin ωt + ω cos ωt = 0, or tan ωt = ω/β = tan δ, i.e. ωt = nπ + δ. Hence

WM/WE = sin2(ωt)/sin2(ωt + δ) = sin2δ/sin22δ = 1/(4cos2δ) = 1/(4β2/ω02) = ω02/4β2 = (1/LC)(L2/R2) = L/(CR2) = 5.

(WM is the magnetic energy of the inductance coil and WE is the electric energy of the capacitor.)

Teacher's Note: At maximum current, tan ωt = tan δ; the ratio reduces to L/(CR2) = 5.

Exam Note: Condition dI/dt = 0 gives ωt = nπ + δ; then substitute.

Question 105. An oscillating circuit consists of two coils connected in series whose inductances are L1 and L2, active resistances are R1 and R2, and mutual inductance is negligible. These coils are to be replaced by one, keeping the frequency and the quality factor of the circuit constant. Find the inductance and the active resistance of such a coil.

Solution. Clearly L = L1 + L2, R = R1 + R2.

Teacher's Note: Series coils add inductance and resistance; same L and R keep ω and Q unchanged.

Exam Note: State both sums; mention negligible mutual inductance.

Question 106. How soon does the current amplitude in an oscillating circuit with quality factor Q = 5000 decrease η = 2.0 times if the oscillation frequency is ν = 2.2 MHz?

Solution. Q = π/(βT), or β = π/(QT). Now βt = ln η, so t = (ln η/π) QT = Q ln η/(πν) = 0.5 ms.

Teacher's Note: Amplitude falls as e−βt, so t = ln η/β, with β = π/(QT).

Exam Note: Substitute Q, η, ν: 5000 × 0.693/(π × 2.2×106).

Question 107. An oscillating circuit consists of capacitance C = 10 μF, inductance L = 25 mH, and active resistance R = 1.0 Ω. How many oscillation periods does it take for the current amplitude to decrease e-fold?

Solution. Current decreases e-fold in time t = 1/β = 2L/R seconds = 2L/(RT) oscillations = (2L/R)(ω/2π) = (L/πR)√(1/LC − R2/4L2) = (1/2π)√(4L/(R2C) − 1) = 15.9 oscillations.

Teacher's Note: Amplitude decays as e−βt, so e-fold time is 1/β = 2L/R; divide by T = 2π/ω.

Exam Note: Use damped ω, not ω0; count N = t/T.

Question 108. How much (in per cent) does the free oscillation frequency ω of a circuit with quality factor Q = 5.0 differ from the natural oscillation frequency ω0 of that circuit?

Solution. Q = π/(βT) = ω/2β, so ω = 2βQ, β = ω/2Q. Now ω0 = ω√(1 + 1/4Q2), or ω = ω0/√(1 + 1/4Q2), so

|ω0 − ω|/ω × 100% = (1/8Q2) × 100% = 0.5%.

Teacher's Note: Binomial expansion: √(1 + 1/4Q2) ≈ 1 + 1/8Q2 for large Q.

Exam Note: Express ω0 in terms of Q, expand, then substitute.

Question 109. In a circuit shown in Fig. 4.29 the battery emf is equal to ℰ = 2.0 V, its internal resistance is r = 9.0 Ω, the capacitance of the capacitor is C = 10 μF, the coil inductance is L = 100 mH, and the resistance is R = 1.0 Ω. At a certain moment the switch Sw was disconnected. Find the energy of oscillations in the circuit (a) immediately after the switch was disconnected; (b) t = 0.30 s after the switch was disconnected.

ℰrCRL

Solution. At t = 0 (before opening the switch) the current through the coil is ℰ/(R + r) and the P.D. across the capacitor is ℰR/(R + r) (the voltage drop across R, as the book's formula uses).

(a) At t = 0 the energy stored is W0 = ½L[ℰ/(R + r)]2 + ½C[ℰR/(R + r)]2 = ½ℰ2(L + CR2)/(R + r)2 = 2.0 mJ.

(b) The current and the charge stored decrease as e−tR/2L, so the energy decreases as e−tR/L. Therefore W = W0e−tR/L = 0.10 mJ.

Teacher's Note: Steady state before opening: coil current ℰ/(R+r); energy then decays as e−Rt/L.

Exam Note: Compute initial L and C energies separately; coil energy dominates.

Question 110. Damped oscillations are induced in a circuit whose quality factor is Q = 50 and natural oscillation frequency is ν0 = 5.5 kHz. How soon will the energy stored in the circuit decrease η = 2.0 times?

Solution. Q = π/(βT) = πν/β = ω/2β = √(ω02 − β2)/2β, or ω0/β = √(1 + 4Q2), or β = ω0/√(1 + 4Q2). (The printed '1 + Q2' in the last form is a misprint.)

Now W = W0e−2βt. Thus the energy decreases η times in t = ln η/2β = ln η √(1 + 4Q2)/(2ω0) ≈ Q ln η/(2πν0) = 1.0 ms.

Corrected: the printed numerical value 1.033 ms is an arithmetic slip; recomputing gives 50 × 0.693/(2π × 5500) = 1.003 ms ≈ 1.0 ms.

Teacher's Note: Energy decays as e−2βt, twice the amplitude rate; Q = ω/2β links β to Q.

Exam Note: Use energy (not amplitude) decay: t = ln η/2β.

Question 111. An oscillating circuit incorporates a leaking capacitor. Its capacitance is equal to C and active resistance to R. The coil inductance is L. The resistance of the coil and the wires is negligible. Find: (a) the damped oscillation frequency of such a circuit; (b) its quality factor.

Solution. In a leaky capacitor, dq/dt = I − I′ where I′ = V/R is the leak current. Now V = q/C = −L dI/dt = −L d/dt(dq/dt + V/R) = −L d2q/dt2 − (L/RC) dq/dt, or

q̈ + (1/RC) q̇ + (1/LC) q = 0. Then q = qme−βt sin(ωt + α).

(a) β = 1/2RC, ω02 = 1/LC, ω = √(ω02 − β2) = √(1/LC − 1/4R2C2).

(b) Q = ω/2β = RC√(1/LC − 1/4R2C2) = ½√(4CR2/L − 1).

Teacher's Note: The leak resistance acts in parallel, so damping is β = 1/2RC, not R/2L.

Exam Note: Leak current V/R enters the charge balance; then identify β and ω.

Question 112. Find the quality factor of a circuit with capacitance C = 2.0 μF and inductance L = 5.0 mH if the maintenance of undamped oscillations in the circuit with the voltage amplitude across the capacitor being equal to Vm = 1.0 V requires a power ⟨P⟩ = 0.10 mW. The damping of oscillations is sufficiently low.

Solution. Given V = Vme−βt sin ωt, ω ≈ ω0, βT << 1. Power loss = (energy loss per cycle)/T = ½CVm2 × 2β (energy decreases as W0e−2βt so loss per cycle is W0 × 2βT).

Thus ⟨P⟩ = ½CVm2 × R/L, or R = (2⟨P⟩/Vm2)(L/C). Hence

Q = (1/R)√(L/C) = √(C/L) Vm2/(2⟨P⟩) = 100 on putting the values.

Teacher's Note: Power needed equals loss rate: ½CVm2·2β with 2β = R/L; then Q = (1/R)√(L/C).

Exam Note: Link P to R, then R to Q; check numbers.

Question 113. What mean power should be fed to an oscillating circuit with active resistance R = 0.45 Ω to maintain undamped harmonic oscillations with current amplitude Im = 30 mA?

Solution. Energy is lost across the resistance and the mean power loss is ⟨P⟩ = R⟨I2⟩ = ½RIm2 = 0.2 mW. This power should be fed to the circuit to maintain undamped oscillations.

Teacher's Note: Mean of I2 over a cycle is Im2/2, so the mean Joule loss is ½RIm2.

Exam Note: Do not forget the factor ½ for the mean.

Question 114. An oscillating circuit consists of a capacitor with capacitance C = 1.2 nF and a coil with inductance L = 6.0 μH and active resistance R = 0.50 Ω. What mean power should be fed to the circuit to maintain undamped harmonic oscillations with voltage amplitude across the capacitor being equal to Vm = 10 V?

Solution. ⟨P⟩ = RCVm2/2L as in (4.112). We get ⟨P⟩ = 5 mW.

Teacher's Note: Reuse the loss formula ⟨P⟩ = ½CVm2·R/L derived for Problem 112.

Exam Note: Check units: nF and μH; result in mW.

Question 115. Find the damped oscillation frequency of the circuit shown in Fig. 4.30. The capacitance C, inductance L, and active resistance R are supposed to be known. Find how must C, L, and R be interrelated to make oscillations possible.

LRC

Solution. Let q1, q2 be defined as in the book with q = q1 + q2, I1 = −q̇1, I2 = −q̇2, where the coil, resistor and capacitor are in parallel (same P.D. V = q/C across each). Then Lİ1 = RI2 = q/C.

Thus CLq̈1 + (q1 + q2) = 0 and RCq̇2 + q1 + q2 = 0. Putting q1 = Aeiωt, q2 = Beiωt:

(1 − ω2LC)A + B = 0, A + (1 + iωRC)B = 0.

A solution exists only if (1 − ω2LC)(1 + iωRC) = 1, or LRC2ω2 − iωLC − RC = 0, or ω2 − iω/(RC) − 1/(LC) = 0. Hence

ω = i/(2RC) ± √(1/LC − 1/4R2C2) = iβ ± ω0 (β = 1/2RC).

Thus q1 = (A1 cos ω0t + A2 sin ω0t)e−βt etc. The damped oscillation frequency is ω0 = √(1/LC − 1/4R2C2). Oscillations are possible only if ω02 > 0, i.e. 1/4R2 < C/L (R > ½√(L/C)).

Teacher's Note: Coil, R and C share one voltage; the parallel R damps with β = 1/2RC, as for a leaky capacitor.

Exam Note: Oscillations need real frequency: 1/4R2 < C/L; state it.

Question 116. There are two oscillating circuits (Fig. 4.31) with capacitors of equal capacitances. How must inductances and active resistances of the coils be interrelated for the frequencies and damping of free oscillations in both circuits to be equal? The mutual inductance of coils in the left circuit is negligible.

L1,R1L2,R2CCL,R(a)(b)

Solution. We have L1İ1 + R1I1 = L2İ2 + R2I2 = −∫I dt/C, I = I1 + I2.

Then differentiating we have the equations

L1C Ï1 + R1C İ1 + (I1 + I2) = 0,
L2C Ï2 + R2C İ2 + (I1 + I2) = 0.

Look for a solution I1 = A1eαt, I2 = A2eαt. Then (1 + α2L1C + αR1C)A1 + A2 = 0 and A1 + (1 + α2L2C + αR2C)A2 = 0.

This set has a nontrivial solution only if (1 + α2L1C + αR1C)(1 + α2L2C + αR2C) = 1, or

α3 + α2(L1R2 + L2R1)/(L1L2) + α(L1 + L2 + R1R2C)/(L1L2C) + (R1 + R2)/(L1L2C) = 0.

This cubic has one real root which we ignore and two complex conjugate roots. We require this pair to be identical with the roots of the equation of the right circuit, α2LC + αRC + 1 = 0.

The general solution is not easy. Special cases: if R1 = R2 = 0, then R = 0 and L = L1L2/(L1 + L2); if L1 = L2 = 0, then L = 0 and R = R1R2/(R1 + R2). (These are the quoted solutions but they are misleading as general results.)

For small R1, R2 put α = −β + iω with β small, neglecting β2, βR1, βR2. Then (1 − ω2L1C)(1 − ω2L2C) = 1, giving ω2 = (L1 + L2)/(L1L2C), identical with ω2 = 1/LC if

L = L1L2/(L1 + L2).

Also (2βL1 − R1)(1 − ω2L2C) + (2βL2 − R2)(1 − ω2L1C) = 0. This gives β = R/2L = (R1L22 + R2L12)/[2L1L2(L1 + L2)], so

R = (R1L22 + R2L12)/(L1 + L2)2 (for small resistances; checked numerically). If L1/R1 = L2/R2 this equals R1R2/(R1 + R2) exactly.

Teacher's Note: Parallel coils behave like one coil of L1L2/(L1+L2) when resistances are small; damping fixes R.

Exam Note: Say result holds for small R; give both L and R.

Question 117. A circuit consists of a capacitor with capacitance C and a coil of inductance L connected in series, as well as a switch and a resistance equal to the critical value for this circuit. With the switch disconnected, the capacitor was charged to a voltage V0, and at the moment t = 0 the switch was closed. Find the current I in the circuit as a function of time t. What is Imax equal to?

CLRSw

Solution. 0 = q/C + L dI/dt + RI, I = +dq/dt. For the critical case R = 2√(L/C). Thus LCq̈ + 2√(LC) q̇ + q = 0. Look for a solution with q ∝ eαt: α = −1/√(LC). An independent solution is teαt. Thus

q = (A + Bt)e−t/√(LC).

At t = 0, q = CV0, thus A = CV0. Also at t = 0, q̇ = I = 0: 0 = B − A/√(LC), so B = V0√(C/L). Finally

I = dq/dt = V0√(C/L) e−t/√(LC) − (1/√(LC))(CV0 + V0√(C/L) t)e−t/√(LC) = −(V0/L) t e−t/√(LC).

The current has been defined to increase the charge, hence the minus sign. The current is maximum when dI/dt = −(V0/L)e−t/√(LC)(1 − t/√(LC)) = 0. This gives t = √(LC) and the magnitude of the maximum current is |Imax| = (V0/e)√(C/L).

Teacher's Note: Critical damping gives a double root, so q = (A + Bt)e−t/√LC; no oscillation.

Exam Note: Apply q(0) and I(0) conditions; maximise I.

Question 118. A coil with active resistance R and inductance L was connected at the moment t = 0 to a source of voltage V = Vm cos ωt. Find the current in the coil as a function of time t.

Solution. The equation of the circuit is L dI/dt + RI = Vm cos ωt (I is the current). From the theory of differential equations I = IP + IC, where IP is a particular integral and IC is the complementary function (solution with RHS = 0). Now IC = IC0e−tR/L, and for IP we write IP = Im cos(ωt − φ). Substituting we get

Im = Vm/√(R2 + ω2L2), φ = tan−1(ωL/R).

Thus I = [Vm/√(R2 + ω2L2)] cos(ωt − φ) + IC0e−tR/L.

Now in an inductive circuit I = 0 at t = 0, because a current cannot change suddenly. Thus IC0 = −[Vm/√(R2 + ω2L2)] cos φ, and so

I = [Vm/√(R2 + ω2L2)] [cos(ωt − φ) − cos φ e−tR/L].

Teacher's Note: Total current = steady-state part + decaying transient; inductor forces I(0) = 0.

Exam Note: Find transient constant from I(0) = 0; state φ = tan−1(ωL/R).

Question 119. A circuit consisting of a capacitor with capacitance C and a resistance R connected in series was connected at the moment t = 0 to a source of ac voltage V = Vm cos ωt. Find the current in the circuit as a function of time t.

Solution. Here the equation is (Q is the charge on the capacitor) Q/C + R dQ/dt = Vm cos ωt. A solution subject to Q = 0 at t = 0 is of the form (as in the previous problem)

Q = Qm[cos(ωt − φ̄) − cos φ̄ e−t/RC].

Substituting back: (Qm/C) cos(ωt − φ̄) − ωRQm sin(ωt − φ̄) = Vm cos ωt = Vm{cos φ̄ cos(ωt − φ̄) − sin φ̄ sin(ωt − φ̄)}. So Qm = CVm cos φ̄ and ωRQm = Vm sin φ̄. This leads to Qm = CVm/√(1 + (ωRC)2), tan φ̄ = ωRC. Hence

I = dQ/dt = [Vm/√(R2 + (1/ωC)2)] [−sin(ωt − φ̄) + (cos2φ̄/sin φ̄) e−t/RC].

(The solution given in the book satisfies I = 0 at t = 0. Then Q = 0 at t = 0 but this will not satisfy the equation at t = 0, since the equation is satisfied with I = 0 only if Q ≠ 0 at t = 0.) With this I, I(t = 0) = Vm/R.

Teacher's Note: Series R lets current jump: with Q = 0 all voltage falls across R, so I(0) = Vm/R.

Exam Note: Use Q(0) = 0 (not I(0) = 0); check I(0) = Vm/R.

Question 120. A long one-layer solenoid tightly wound of wire with resistivity ρ has n turns per unit length. The thickness of the wire insulation is negligible. The cross-sectional radius of the solenoid is equal to a. Find the phase difference between current and alternating voltage fed to the solenoid with frequency ν.

Solution. The current lags behind the voltage by the phase angle φ = tan−1(ωL/R). Now L = μ0n2πa2l, l = length of the solenoid, and R = ρ·2πanl/(πb2), 2b = diameter of the wire. But 2bn = 1, so b = 1/2n. Then

ωL/R = (2πν)(μ0n2πa2l)(πb2)/(ρ·2πanl) with b2 = 1/4n2, so φ = tan−1(π2μ0aν/4ρn).

Teacher's Note: Tight winding gives wire diameter 1/n, so R = 8ρan3l and φ = arctan(ωL/R).

Exam Note: Express wire radius via n; current lags the voltage.

Question 121. A circuit consisting of a capacitor and an active resistance R = 110 Ω connected in series is fed an alternating voltage with amplitude Vm = 110 V. In this case the amplitude of steady-state current is equal to Im = 0.50 A. Find the phase difference between the current and the voltage fed.

Solution. Here V = Vm cos ωt, I = Im cos(ωt + φ), where Im = Vm/√(R2 + (1/ωC)2), tan φ = 1/ωRC. Now R2 + 1/(ωC)2 = (Vm/Im)2, so 1/ωRC = √((Vm/RIm)2 − 1). Thus the current is ahead of the voltage by

φ = tan−1(1/ωRC) = tan−1√((Vm/RIm)2 − 1) = 60°.

Teacher's Note: Vm/(RIm) = 2 gives tan φ = √3; in an RC circuit the current leads.

Exam Note: Eliminate ωC using the impedance; state current leads voltage.

Question 122. Fig. 4.32 illustrates the simplest ripple filter. A voltage V = V0(1 + cos ωt) is fed to the left input. Find: (a) the output voltage V′(t); (b) the magnitude of the product RC at which the output amplitude of alternating voltage component is η = 7.0 times less than the direct voltage component, if ω = 314 s−1.

RCVV′

Solution. Here V = IR + ∫I dt/C, or Rİ + I/C = V̇ = −ωV0 sin ωt. Ignoring transients, a solution has the form I = I0 sin(ωt − α). Substituting: ωRI0 cos(ωt − α) + (I0/C) sin(ωt − α) = −ωV0{sin(ωt − α) cos α + cos(ωt − α) sin α}, so RI0 = −V0 sin α and I0/ωC = −V0 cos α, α = π + tan−1(ωRC), I0 = V0/√(R2 + (1/ωC)2). Thus I = −I0 sin(ωt − tan−1ωRC).

Then Q = ∫0t I dt = Q0 + (I0/ω) cos(ωt − tan−1ωRC). It satisfies V0(1 + cos ωt) = R dQ/dt + Q/C if Q0 = CV0, and I0/ωC = V0/√(1 + (ωRC)2), RI0 = V0ωRC/√(1 + (ωRC)2) (this checks). Hence

(a) V′ = Q/C = V0 + [V0/√(1 + (ωRC)2)] cos(ωt − tan−1ωRC). Corrected: the printed final line writes cos(ωt − α) with α = π + tan−1(ωRC), which would reverse the sign of the ac term; the phase from the working above is tan−1(ωRC).

(b) V0/η = V0/√(1 + (ωRC)2), or η2 − 1 = ω2(RC)2, or RC = √(η2 − 1)/ω = 22 ms.

Teacher's Note: Output = dc part V0 plus ac part attenuated by 1/√(1 + (ωRC)2) and delayed in phase.

Exam Note: Compare ac amplitude with dc V0: η2 − 1 = (ωRC)2.

Download IE Irodov Solutions for JEE Math PDF

Complete Math Solutions for IE Irodov Solutions Chapter 24 Electric Oscillations Part 1

Explore reliable mathematical solutions for IE Irodov Solutions Chapter 24 Electric Oscillations Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.