Download JEE Physics IE Irodov Textbook Solutions: Chapter 23 Mechanical Oscillations
Explore reliable textbook solutions for Chapter 23 Mechanical Oscillations tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access IE Irodov Textbook Answers and Solutions
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 23 Mechanical Oscillations - Problems 62 to 93
Damped and Forced Oscillations
Question 62. In a cylinder filled up with ideal gas and closed from both ends there is a piston of mass m and cross-sectional area S (Fig. 4.21). In equilibrium the piston divides the cylinder into two equal parts, each with volume V0. The gas pressure is p0. The piston was slightly displaced from the equilibrium position and released. Find its oscillation frequency, assuming the processes in the gas to be adiabatic and the friction negligible.
Solution.
(Fig. 4.21: a closed cylinder with the piston dividing it into two equal parts; the piston is displaced a small distance x towards the right.) Let us displace the piston through a small distance x towards the right. From Fx = m wx:
(p1 − p2)S = −m ẍ (1)
The process is adiabatic, so from pVγ = const, with the new volumes of the left and right parts (V0 + Sx) and (V0 − Sx):
p1 = p0V0γ/(V0 + Sx)γ and p2 = p0V0γ/(V0 − Sx)γ
So Eqn (1) becomes
(p0V0γS/m){1/(V0 − Sx)γ − 1/(V0 + Sx)γ} = −ẍ
or (p0V0γS/m)·[(1 + γSx/V0) − (1 − γSx/V0)] / [V0γ(1 − γS²x²/V0²)] = −ẍ.
Neglecting the term γS²x²/V0² in the denominator, as it is very small, we get
ẍ = −(2p0S²γ/(mV0)) x,
which is the equation of S.H.M., and hence the oscillation (angular) frequency is
ω0 = S √(2p0γ/(mV0)), i.e. ν = ω0/2π.
Teacher's Note: Displacing the piston compresses one side and expands the other; both pressure changes add to the restoring force.
Exam Note: Show adiabatic p V^γ = const and linearise for small x.
Question 63. A small ball of mass m = 21 g suspended by an insulating thread at a height h = 12 cm from a large horizontal conducting plane performs small oscillations (Fig. 4.22). After a charge q had been imparted to the ball, the oscillation period changed η = 2.0 times. Find q.
Solution.
In the absence of the charge, the oscillation period of the ball is T = 2π√(l/g).
When we impart the charge q to the ball, it will be influenced by the induced charges on the conducting plane. From the electric image method the electric force on the ball by the plane is q²/(4πε0(2h)²) and is directed downward. Thus in this case the effective acceleration of the ball is
g′ = g + q²/(16πε0mh²)
and the corresponding time period
T′ = 2π√(l/g′) = 2π√( l / (g + q²/(16πε0mh²)) ).
From the condition of the problem T = ηT′, so T² = η²T′², or
1/g = η² · 1/(g + q²/(16πε0mh²)).
Thus on solving
q = 4h √(πε0mg(η² − 1)) = 2 μC.
Teacher's Note: The grounded plane acts as an image charge −q at distance 2h, adding a downward force and shortening the period.
Exam Note: Use image-charge force; effective g′ = g + F/m.
Question 64. A small magnetic needle performs small oscillations about an axis perpendicular to the magnetic induction vector. On changing the magnetic induction the needle's oscillation period decreased η = 5.0 times. How much and in what way was the magnetic induction changed? The oscillation damping is assumed to be negligible.
Solution.
In a magnetic field of induction B the couple on the magnet is −MB sinθ ≈ −MBθ. Equating this to I θ̈ we get
I θ̈ + MBθ = 0, or ω² = MB/I, T = 2π√(I/(MB)).
Given T2 = T1/η:
√(1/B2) = √(1/B1)·(1/η), or 1/B2 = (1/B1)(1/η²), or B2 = η²B1.
The induction of the field increased η² = 25 times.
Teacher's Note: T ∝ 1/√B, so a period reduced by η needs B increased by η².
Exam Note: State both the factor (η²) and the direction (increase).
Question 65. A loop (Fig. 4.23) is formed by two parallel conductors connected by a solenoid with inductance L and a conducting rod of mass m which can freely (without friction) slide over the conductors. The conductors are located in a horizontal plane in a uniform vertical magnetic field with induction B. The distance between the conductors is equal to l. At the moment t = 0 the rod is imparted an initial velocity v0 directed to the right. Find the law of its motion x(t) if the electric resistance of the loop is negligible.
Solution.
We have in the circuit at a certain instant of time t, from Faraday's law of electromagnetic induction:
L di/dt = Bl dx/dt, or L di = Bl dx.
As at t = 0, x = 0 and i = 0, so Li = Blx, or i = (Bl/L)x (1)
For the rod, from the second law of motion Fx = m wx: −ilB = m ẍ.
Using Eqn (1), we get
ẍ = −(l²B²/(mL)) x = −ω0²x (2), where ω0 = lB/√(mL).
The solution of the above differential equation is of the form x = a sin(ω0t + α). From the initial condition, at t = 0, x = 0, so α = 0. Hence x = a sin ω0t (3).
Differentiating w.r.t. time, ẋ = aω0 cos ω0t. But at t = 0, ẋ = v0, thus v0 = aω0 or a = v0/ω0 (4).
Putting the value of a from Eqn (4) into Eqn (3), we obtain
x = (v0/ω0) sin ω0t, where ω0 = lB/√(mL).
Teacher's Note: With zero resistance, induced emf is balanced by L di/dt, so the loop acts like a spring: harmonic motion.
Exam Note: Write i = Blx/L first; then SHM with ω0 = Bl/√(mL).
Question 66. A coil of inductance L connects the upper ends of two vertical copper bars separated by a distance l. A horizontal conducting connector of mass m starts falling with zero initial velocity along the bars without losing contact with them. The whole system is located in a uniform magnetic field with induction B perpendicular to the plane of the bars. Find the law of motion x(t) of the connector.
Solution.
(Figure: two vertical bars joined at the top by the coil L, the field B directed into the plane, and the connector sliding down; x is the distance fallen.) As the connector moves, an emf is set up in the circuit and a current flows. Since the emf is ξ = −Bl ẋ, we must have −Bl ẋ + L dI/dt = 0, so I = Blx/L, provided x is measured from the initial position.
We then have m ẍ = −(Blx/L)·B·l + mg, for by Lenz's law the induced current will oppose downward sliding. Finally
ẍ + ((Bl)²/(mL)) x = g.
On putting ω0 = Bl/√(mL): ẍ + ω0²x = g.
A solution of this equation is x = g/ω0² + A cos(ω0t + α). But x = 0 and ẋ = 0 at t = 0. This gives
x = (g/ω0²)(1 − cos ω0t).
Teacher's Note: Gravity gives a constant force; the magnetic back-force acts as a spring, so the connector oscillates about x = g/ω0².
Exam Note: Add particular solution g/ω0²; use x = ẋ = 0 initially.
Question 67. A point performs damped oscillations according to the law x = a0e−βt sin ωt. Find: (a) the oscillation amplitude and the velocity of the point at the moment t = 0; (b) the moments of time at which the point reaches the extreme positions.
Solution.
We are given x = a0e−βt sin ωt.
(a) The velocity of the point at t = 0 is v0 = (ẋ)t=0 = ωa0.
The term "oscillation amplitude at the moment t = 0" is meaningless. Probably the implication is the amplitude for t ≪ 1/β. Then x ≈ a0 sin ωt and the amplitude is a0.
(b) ẋ = (−βa0 sin ωt + ωa0 cos ωt)e−βt = 0 when the displacement is an extremum. Then
tan ωt = ω/β, or ωt = tan−1(ω/β) + nπ, n = 0, 1, 2, …
Teacher's Note: Extremes are where velocity vanishes, not where sin ωt = ±1, because the exponential factor shifts them.
Exam Note: Set ẋ = 0 and write t_n = [arctan(ω/β) + nπ]/ω.
Question 68. A body performs torsional oscillations according to the law φ = φ0e−βt cos ωt. Find: (a) the angular velocity φ̇ and the angular acceleration φ̈ of the body at the moment t = 0; (b) the moments of time at which the angular velocity becomes maximum.
Solution.
Given φ = φ0e−βt cos ωt, we have
φ̇ = −βφ − ωφ0e−βt sin ωt
φ̈ = −βφ̇ + βωφ0e−βt sin ωt − ω²φ0e−βt cos ωt = β²φ + 2βωφ0e−βt sin ωt − ω²φ
(a) (φ̇)0 = −βφ0, (φ̈)0 = (β² − ω²)φ0.
(b) φ̇ = −φ0e−βt(β cos ωt + ω sin ωt) becomes maximum (or minimum) when
φ̈ = φ0(β² − ω²)e−βt cos ωt + 2βωφ0e−βt sin ωt = 0,
or tan ωt = (ω² − β²)/(2βω), and
tn = (1/ω)[tan−1((ω² − β²)/(2βω)) + nπ], n = 0, 1, 2, …
Teacher's Note: Maximum angular velocity means φ̈ = 0; differentiate twice, carefully keeping the product-rule terms.
Exam Note: Give φ̇(0), φ̈(0) and the tan ωt condition.
Question 69. A point performs damped oscillations with frequency ω and damping coefficient β according to the law (4.1b), x = a0e−βt cos(ωt + α). Find the initial amplitude a0 and the initial phase α if at the moment t = 0 the displacement of the point and its velocity projection are equal to: (a) x(0) = 0 and vx(0) = ẋ0; (b) x(0) = x0 and vx(0) = 0.
Solution.
We write x = a0e−βt cos(ωt + α).
(a) x(0) = 0 ⇒ α = ±π/2 ⇒ x = ∓a0e−βt sin ωt, and ẋ(0) = ∓ωa0.
Since a0 is positive, we must choose the upper sign if ẋ(0) < 0 and the lower sign if ẋ(0) > 0. Thus
a0 = |ẋ(0)|/ω and α = +π/2 if ẋ(0) < 0; α = −π/2 if ẋ(0) > 0.
(b) We write x = Re A e(−β+iω)t, A = a0eiα. Then ẋ = vx = Re (−β + iω)A e(−β+iω)t.
From vx(0) = 0 we get Re (−β + iω)A = 0. This implies A = ±i(β + iω)B where B is real and positive. Also x0 = Re A = ∓ωB, so
B = |x0|/ω, with the + sign in A if x0 < 0 and the − sign in A if x0 > 0.
So A = ±i((β + iω)/ω)|x0| = (∓1 ± iβ/ω)|x0|. Finally
a0 = √(1 + (β/ω)²) |x0|, tan α = −β/ω, α = tan−1(−β/ω).
α is in the 4th quadrant (−π/2 < α < 0) if x0 > 0 and in the 2nd quadrant (π/2 < α < π) if x0 < 0.
Teacher's Note: Zero displacement fixes α = ±π/2; zero velocity gives tan α = −β/ω and a0 = x0 √(1 + β²/ω²).
Exam Note: Choose the sign of α from the sign of the initial velocity.
Question 70. A point performs damped oscillations with frequency ω = 25 s−1. Find the damping coefficient β if at the initial moment the velocity of the point is equal to zero and its displacement from the equilibrium position is η = 1.020 times less than the amplitude at that moment.
Solution.
x = a0e−βt cos(ωt + α). Then (ẋ)t=0 = −βa0 cos α − ωa0 sin α = 0, or tan α = −β/ω.
Also (x)t=0 = a0 cos α = a0/η, so sec²α = η², tan α = −√(η² − 1). Thus
β = ω√(η² − 1)
(We have taken the amplitude at t = 0 to be a0.) Numerically β = 25 × √(1.020² − 1) = 25 × 0.2010 ≈ 5.0 s−1.
Teacher's Note: Zero initial velocity gives tan α = −β/ω; displacement ratio 1/η gives cos α, so β = ω√(η² − 1).
Exam Note: Final numerical value with unit: β ≈ 5.0 s⁻¹.
Question 71. A point performs damped oscillations with frequency ω and damping coefficient β. Find the velocity amplitude of the point as a function of time t if at the moment t = 0: (a) its displacement amplitude is equal to a0; (b) the displacement of the point x(0) = 0 and its velocity projection vx(0) = ẋ0.
Solution.
We write x = a0e−βt cos(ωt + α) = Re A e(−β+iω)t, A = a0eiα, so ẋ = Re A(−β + iω)e(−β+iω)t.
The velocity amplitude as a function of time is defined in the following manner. Put t = t0 + τ. Then x = Re A e−β(t0+τ) eiω(t0+τ) ≈ Re A e−βt0 eiωt0+iωτ for τ ≪ 1/β. This means that the displacement amplitude around the time t0 is a0e−βt0, and we can say that the displacement amplitude at time t is a0e−βt. Similarly for the velocity amplitude.
(a) Since A(−β + iω) = a0eiα(−β + iω) = a0√(β² + ω²) eiγ (γ is another constant), the velocity amplitude at time t is
a0√(β² + ω²) e−βt.
(b) x(0) = 0 ⇒ Re A = 0, or A = ±ia0, where a0 is real and positive. Also vx(0) = ẋ0 = Re[±ia0(−β + iω)] = ∓ωa0.
Thus a0 = |ẋ0|/ω, and we take the − (+) sign if ẋ0 is positive (negative). Finally the velocity amplitude is obtained as
(|ẋ0|/ω) √(β² + ω²) e−βt.
Teacher's Note: Velocity amplitude is displacement amplitude times √(β² + ω²), decaying with the same e^(−βt).
Exam Note: Part (b): replace a0 by |ẋ0|/ω.
Question 72. There are two damped oscillations with the following periods T and damping coefficients β: T1 = 0.10 ms, β1 = 100 s−1 and T2 = 10 ms, β2 = 10 s−1. Which of them decays faster?
Solution.
The first oscillation decays faster in time. But if one takes the natural time scale, the period T for each oscillation, the second oscillation attenuates faster during that period.
(Check: β1T1 = 100 × 10−4 = 0.01, β2T2 = 10 × 10−2 = 0.1.)
Teacher's Note: Decay in time is set by β; decay per cycle by βT, the log decrement.
Exam Note: Give both comparisons: β per second, βT per period.
Question 73. A mathematical pendulum oscillates in a medium for which the logarithmic damping decrement is equal to λ0 = 1.50. What will be the logarithmic damping decrement if the resistance of the medium increases n = 2.00 times? How many times has the resistance of the medium to be increased for the oscillations to become impossible?
Solution.
By definition of the logarithmic decrement (λ = β·2π/ω) we get for the original decrement λ0 = 2πβ/√(ω0² − β²), and finally, with β → nβ,
λ = 2πnβ/√(ω0² − n²β²).
Now β/√(ω0² − β²) = λ0/2π, or β/ω0 = (λ0/2π)/√(1 + (λ0/2π)²), so
(λ/2π)/√(1 + (λ/2π)²) = n(λ0/2π)/√(1 + (λ0/2π)²).
Hence
λ/2π = n(λ0/2π)/√(1 − (n² − 1)(λ0/2π)²).
For critical damping ω0 = ncβ:
1/nc = β/ω0 = (λ0/2π)/√(1 + (λ0/2π)²), or nc = √(1 + (2π/λ0)²).
Numerically: λ ≈ 3.3 (for n = 2.00) and nc ≈ 4.3.
Teacher's Note: Resistance scales β, not λ directly; oscillations vanish when β reaches ω0 (critical damping).
Exam Note: Express λ through β/ω0; critical case ω0 = n_c β.
Question 74. A dead weight suspended from a weightless spring extends it by Δx = 9.8 cm. What will be the oscillation period of the dead weight when it is pushed slightly in the vertical direction? The logarithmic damping decrement is equal to λ = 3.1.
Solution.
The equation of the dead weight is m ẍ + 2βm ẋ + mω0²x = mg, so Δx = g/ω0², or ω0² = g/Δx.
Now λ = 2πβ/ω = 2πβ/√(ω0² − β²), or ω0/√(ω0² − β²) = √(1 + (λ/2π)²).
Thus T = 2π/√(ω0² − β²) = (2π/ω0)√(1 + (λ/2π)²)
= 2π√(Δx/g) √(1 + (λ/2π)²) = √((Δx/g)(4π² + λ²)) = 0.70 s.
Teacher's Note: Static extension gives ω0² = g/Δx; damping lengthens the period by √(1 + (λ/2π)²).
Exam Note: Find ω0 from Δx, then T = √((Δx/g)(4π² + λ²)).
Question 75. Find the quality factor of the oscillator whose displacement amplitude decreases η = 2.0 times every n = 110 oscillations.
Solution.
The displacement amplitude decreases η times every n oscillations. Thus
1/η = e−β(2π/ω)n, or 2πnβ/ω = ln η, or β/ω = ln η/(2πn).
So Q = ω/(2β) = πn/ln η ≈ 499.
Teacher's Note: Q = ω/2β (for weak damping) = π/λ; amplitude ratio over n cycles fixes the log decrement.
Exam Note: Use ln η = nλ, then Q = π/λ.
Question 76. A particle was displaced from the equilibrium position by a distance l = 1.0 cm and then left alone. What is the distance that the particle covers in the process of oscillations till the complete stop, if the logarithmic damping decrement is equal to λ = 0.020?
Solution.
From x = a0e−βt cos(ωt + α), using (x)t=0 = l = a0 cos α and 0 = (ẋ)t=0 = −βa0 cos α − ωa0 sin α, we get tan α = −β/ω, or cos α = ω/√(ω² + β²), and
x = (l√(ω² + β²)/ω) e−βt cos(ωt − tan−1(β/ω)).
(Sketch in the book: the x–t curve starting at x = l and swinging with decreasing loops 1, 2, 3, …) x = 0 at t = (1/ω)(nπ + π/2 + tan−1(β/ω)). The total distance travelled in the first lap = l.
To get the maximum displacement in the second lap we note that ẋ = 0 at ωt = π, 2π, 3π, … etc. Thus xmax = −a0e−πβ/ω cos α = −l e−πβ/ω for t = π/ω, so the distance traversed in the 2nd lap = 2l e−πβ/ω. Continuing, the total distance traversed is
l + 2l e−πβ/ω + 2l e−2πβ/ω + … = l + 2l e−πβ/ω/(1 − e−πβ/ω) = l + 2l/(eπβ/ω − 1)
= l (eπβ/ω + 1)/(eπβ/ω − 1) = l (1 + eλ/2)/(eλ/2 − 1),
where λ = 2πβ/ω is the logarithmic decrement. Substitution gives 2 metres (l coth(λ/4) ≈ 200 cm).
Teacher's Note: Successive extremes form a geometric series with ratio e^(−λ/2); sum it to get l·coth(λ/4).
Exam Note: Write the geometric series and sum it before substituting.
Question 77. Find the quality factor of a mathematical pendulum l = 50 cm long if during the time interval τ = 5.2 min its total mechanical energy decreases η = 4.0·104 times.
Solution.
For an undamped oscillator the mechanical energy E = ½mẋ² + ½mω0²x² is conserved. For a damped oscillator x = a0e−βt cos(ωt + α), ω = √(ω0² − β²), and
E(t) = ½m a0²e−2βt[β² cos²(ωt + α) + 2βω cos(ωt + α) sin(ωt + α) + ω² sin²(ωt + α)] + ½m a0²ω0²e−2βt cos²(ωt + α)
= ½m a0²ω0²e−2βt + ½m a0²β²e−2βt cos(2ωt + 2α) + ½m a0²βω e−2βt sin(2ωt + 2α).
If β ≪ ω, then the average of the last two terms over many oscillations about the time t will vanish and ⟨E(t)⟩ = ½m a0²ω0²e−2βt, which is the relevant mechanical energy.
In time τ this decreases by a factor 1/η, so e−2βτ = 1/η, or β = ln η/(2τ), and
λ = 2πβ/√(ω0² − β²) = 2π/√((ω0/β)² − 1) = 2π/√(4gτ²/(l ln²η) − 1), since ω0² = g/l,
and Q = π/λ = ½√(4gτ²/(l ln²η) − 1) ≈ 130.
Teacher's Note: Energy decays as e^(−2βt); the time for an η-fold fall gives β, then Q = π/λ.
Exam Note: Use ω0² = g/l and keep the −1 under the root.
Question 78. A uniform disc of radius R = 13 cm can rotate about a horizontal axis perpendicular to its plane and passing through the edge of the disc. Find the period of small oscillations of that disc if the logarithmic damping decrement is equal to λ = 1.00.
Solution.
The restoring couple is Γ = −mgR sin φ ≈ −mgRφ (Fig.: the disc hangs from a point on its rim, φ is the angle of the line to the centre from the vertical). The moment of inertia is I = 3mR²/2. Thus for undamped oscillations
(3mR²/2) φ̈ + mgRφ = 0, so ω0² = 2g/(3R).
Also λ = 2πβ/ω = 2πβ/√(ω0² − β²). Hence β/√(ω0² − β²) = λ/2π, or ω0/√(ω0² − β²) = √(1 + (λ/2π)²).
Hence finally the period T of small oscillations comes to
T = 2π/ω = (2π/ω0) · ω0/√(ω0² − β²) = 2π√(3R/(2g) · (1 + (λ/2π)²)) = √((3R/2g)(4π² + λ²)) = 0.90 s.
Teacher's Note: Axis at the rim gives I = 3mR²/2 by the parallel-axis theorem, hence ω0² = 2g/3R.
Exam Note: Find ω0 first, then correct for damping using λ.
Question 79. A thin uniform disc of mass m and radius R suspended by an elastic thread in the horizontal plane performs torsional oscillations in a liquid. The moment of elastic forces emerging in the thread is equal to N = aφ, where a is a constant and φ is the angle of rotation from the equilibrium position. The resistance force acting on a unit area of the disc is equal to F1 = ηv, where η is a constant and v is the velocity of the given element of the disc relative to the liquid. Find the frequency of small oscillations.
Solution.
Let us calculate the moment G1 of all the resistive forces on the disc. When the disc rotates, an element (r dr dθ) with coordinates (r, θ) has a velocity rφ̇, where φ is the instantaneous angle of rotation from the equilibrium position and r is measured from the centre. Then
G1 = ∫02π dθ ∫0R dr · r · (F1 × r) = ∫0R ηrφ̇ r² dr × 2π = (πηR⁴/2) φ̇.
Also the moment of inertia = mR²/2. Thus
(mR²/2) φ̈ + (πηR⁴/2) φ̇ + aφ = 0, or φ̈ + 2(πηR²/(2m)) φ̇ + (2a/(mR²)) φ = 0.
Hence ω0² = 2a/(mR²) and β = πηR²/(2m), and the angular frequency is
ω = √( 2a/(mR²) − (πηR²/(2m))² ).
Note: normally by frequency we mean ω/2π.
Teacher's Note: Integrate viscous torque over the disc to get a φ̇ term; read off β and ω0.
Exam Note: Quote ω = √(ω0² − β²); note ν = ω/2π.
Question 80. A disc A of radius R suspended by an elastic thread between two stationary planes (Fig. 4.24) performs torsional oscillations about its axis OO′. The moment of inertia of the disc relative to that axis is equal to I, the clearance between the disc and each of the planes is equal to h, with h ≪ R. Find the viscosity of the gas surrounding the disc A if the oscillation period of the disc equals T and the logarithmic damping decrement, λ.
Solution.
(Fig. 4.24: a thin disc A hangs on a thread OO′ in the gap between two fixed horizontal planes, with clearance h on each side.) From the law of viscosity, force per unit area = η dv/dx. So when the disc executes torsional oscillations the resistive couple on it is
−∫0R η · 2πr · (rφ̇/h) · r dr × 2 = −(ηπR⁴/h) φ̇
(factor 2 for the two sides of the disc), where φ is the torsion angle. The equation of motion is
I φ̈ + (ηπR⁴/h) φ̇ + cφ = 0.
Comparing with φ̈ + 2βφ̇ + ω0²φ = 0 we get β = ηπR⁴/(2hI).
Now the logarithmic decrement is given by λ = βT, T = time period. Thus
η = 2λhI/(πR⁴T).
Teacher's Note: Velocity gradient in each gap is rφ̇/h; two gaps double the couple, giving β = ηπR⁴/2hI.
Exam Note: Remember factor 2 for two faces and λ = βT.
Question 81. A conductor in the shape of a square frame with side a suspended by an elastic thread is located in a uniform horizontal magnetic field with induction B. In equilibrium the plane of the frame is parallel to the vector B (Fig. 4.25). Having been displaced from the equilibrium position, the frame performs small oscillations about a vertical axis passing through its centre. The moment of inertia of the frame relative to that axis is equal to I, its electric resistance is R. Neglecting the inductance of the frame, find the time interval after which the amplitude of the frame's deviation angle decreases e-fold.
Solution.
If φ is the angle of deviation of the frame from its normal position, then an e.m.f. ε = Ba²φ̇ is induced in the frame in the displaced position and a current ε/R = Ba²φ̇/R flows in it. A couple
(Ba²φ̇/R)·B·a·a = (B²a⁴/R) φ̇
then acts on the frame in addition to any elastic restoring couple cφ. We write the equation of the frame as
I φ̈ + (B²a⁴/R) φ̇ + cφ = 0.
Thus β = B²a⁴/(2IR), where β is defined in the book. Amplitude of oscillation dies out according to e−βt, so the time required for the oscillations to decrease to 1/e of its value is
1/β = 2IR/(B²a⁴).
Teacher's Note: Eddy current in the frame gives a braking couple proportional to φ̇; the e-fold time is 1/β.
Exam Note: Derive β = B²a⁴/(2IR); answer is τ = 1/β.
Question 82. A bar of mass m = 0.50 kg lying on a horizontal plane with a friction coefficient k = 0.10 is attached to the wall by means of a horizontal non-deformed spring. The stiffness of the spring is equal to κ = 2.45 N/cm, its mass is negligible. The bar was displaced so that the spring was stretched by x0 = 3.0 cm, and then released. Find: (a) the period of oscillation of the bar; (b) the total number of oscillations that the bar performs until it stops completely.
Solution.
We shall denote the stiffness constant by κ. Suppose the spring is stretched by x0. The bar is then subject to two horizontal forces: (1) restoring force −κx and (2) friction kmg opposing motion. If x0 > kmg/κ = Δ, the bar will come back. (If x0 ≤ Δ, the bar will stay put.) The equation of the bar when it is moving to the left is
m ẍ = −κx + kmg.
This equation has the solution x = Δ + (x0 − Δ) cos√(κ/m) t, where we have used x = x0, ẋ = 0 at t = 0. This solution is only valid till the bar comes to rest. This happens at t1 = π/√(κ/m), and at that time x = x1 = 2Δ − x0. If x0 > 2Δ the tendency of the bar will now be to move to the right (if Δ < x0 < 2Δ the bar will stay put now). Now the equation for rightward motion becomes m ẍ = −κx − kmg (the friction force has reversed).
We notice that the bar will move to the right only if κ(x0 − 2Δ) > kmg, i.e. x0 > 3Δ. In this case the solution is x = −Δ + (x0 − 3Δ) cos√(κ/m) t (with t measured from t1), since x = 2Δ − x0 and ẋ = 0 at t = t1. The bar will next come to rest at t = t2 = 2π/√(κ/m), and at that instant x = x2 = x0 − 4Δ. However the bar will stay put unless x0 > 5Δ. Thus:
(a) the time period of one full oscillation = 2π/√(κ/m) = 2π√(m/κ) = 0.28 s.
(b) There is no oscillation if 0 < x0 < Δ; one half oscillation if Δ < x0 < 3Δ; two half oscillations if 3Δ < x0 < 5Δ, etc. The number of half oscillations is the integer nhalf = [(x0 − Δ)/(2Δ)], rounded up to the next whole number of half-swings (the bar stops when the amplitude falls to Δ or less).
Numerically: Δ = kmg/κ = 0.10 × 0.50 × 9.8/245 m = 0.20 cm, so x0 = 15Δ and (x0 − Δ)/(2Δ) = 7. The bar makes 7 half-oscillations (the amplitude after the 7th is exactly Δ, where it stops), i.e. 3.5 full oscillations.
Teacher's Note: Friction is constant and reverses each half-cycle, so amplitude drops by 2Δ per half-swing; motion stops once amplitude ≤ Δ.
Exam Note: Period unaffected by friction; count half-swings using Δ = kmg/κ.
Question 83. A ball of mass m can perform undamped harmonic oscillations about the point x = 0 with natural frequency ω0. At the moment t = 0, when the ball was in equilibrium, a force Fx = F0 cos ωt coinciding with the x axis was applied to it. Find the law of forced oscillation x(t) for that ball.
Solution.
The equation of motion of the ball is m(ẍ + ω0²x) = F0 cos ωt. This equation has the solution
x = A cos(ω0t + α) + B cos ωt,
where A and α are arbitrary and B is obtained by substitution in the above equation: B = (F0/m)/(ω0² − ω²).
The conditions x = 0, ẋ = 0 at t = 0 give A cos α + (F0/m)/(ω0² − ω²) = 0 and −ω0A sin α = 0. This gives α = 0, A = −(F0/m)/(ω0² − ω²) = (F0/m)/(ω² − ω0²). Finally,
x = ((F0/m)/(ω² − ω0²)) (cos ω0t − cos ωt).
Teacher's Note: General solution = free oscillation + driven term; starting from rest at equilibrium fixes the free part.
Exam Note: Use x(0) = 0 and ẋ(0) = 0 for A, α.
Question 84. A particle of mass m can perform undamped harmonic oscillations due to an elastic force with coefficient k. When the particle was in equilibrium, a permanent force F was applied to it for τ seconds. Find the oscillation amplitude that the particle acquired after the action of the force ceased. Draw the approximate plot x(t) of oscillations. Investigate possible cases.
Solution.
We have to look for solutions of the equation m ẍ + kx = F, 0 < t < τ, and m ẍ + kx = 0, t > τ, subject to x(0) = ẋ(0) = 0, where F is constant. The solution will be sought in the form
x = F/k + A cos(ω0t + α), 0 ≤ t ≤ τ; x = B cos(ω0(t − τ) + β), t > τ.
A and α are determined from the boundary condition at t = 0: 0 = F/k + A cos α, 0 = −ω0A sin α. Thus α = 0, A = −F/k and x = (F/k)(1 − cos ω0t), 0 ≤ t < τ.
B and β are determined by the continuity of x and ẋ at t = τ. Thus
(F/k)(1 − cos ω0τ) = B cos β and ω0(F/k) sin ω0τ = −ω0B sin β.
Thus B² = (F/k)²(2 − 2 cos ω0τ), or
B = 2(F/k) |sin(ω0τ/2)|.
(Plot in the book: x(t) rises from 0 as (F/k)(1 − cos ω0t) up to t = τ, then continues as a cosine of constant amplitude B about x = 0.)
Cases (added): the amplitude is 0 if τ = nT (n = 1, 2, …), where T = 2π/ω0; it is maximum, 2F/k, if τ = (n + ½)T; and for τ ≪ T, B ≈ Fω0τ/k, i.e. proportional to the impulse Fτ.
Teacher's Note: After the force stops, continuity of x and velocity at t = τ gives the new amplitude 2(F/k)|sin(ω0τ/2)|.
Exam Note: Match x, ẋ at t = τ; discuss τ = nT, (n+½)T.
Question 85. A ball of mass m, when suspended by a spring, stretches the latter by Δl. Due to an external vertical force varying according to a harmonic law with amplitude F0 the ball performs forced oscillations. The logarithmic damping decrement is equal to λ. Neglecting the mass of the spring, find the angular frequency of the external force at which the displacement amplitude of the ball is maximum. What is the magnitude of that amplitude?
Solution.
For the spring mg = κΔl, where κ is its stiffness coefficient. Thus ω0² = κ/m = g/Δl. The equation of motion of the ball is
ẍ + 2βẋ + ω0²x = (F0/m) cos ωt.
Here λ = 2πβ/√(ω0² − β²), or β/ω0 = (λ/2π)/√(1 + (λ/2π)²).
To find the steady solution we write the complex equation z̈ + 2βż + ω0²z = (F0/m)eiωt, with Re z = x, and look for a particular integral z = Aeiωt. Substitution gives z = (F0/m)eiωt/(ω0² − ω² + 2iβω). Taking the real part,
x = (F0/m) [(ω0² − ω²) cos ωt + 2βω sin ωt]/[(ω0² − ω²)² + 4β²ω²] = (F0/m) cos(ωt − φ)/√((ω0² − ω²)² + 4β²ω²), φ = tan−1(2βω/(ω0² − ω²)).
The amplitude is maximum when the denominator is minimum: ω⁴ − 2ω0²ω² + 4β²ω² + ω0⁴ = (ω² − ω0² + 2β²)² + 4β²ω0² − 4β⁴ is minimum, i.e. for ω² = ω0² − 2β². Thus
ωres² = ω0²(1 − 2β²/ω0²) = (g/Δl)[1 − 2(λ/2π)²/(1 + (λ/2π)²)] = (g/Δl)·(1 − (λ/2π)²)/(1 + (λ/2π)²),
and ares = (F0/m)/√(4β²ω0² − 4β⁴) = (F0/m)/(2β√(ω0² − β²)) = (F0/m)(1/(2β²))(λ/2π)
= (F0/(2mω0²)) · (1 + (λ/2π)²)/(λ/2π) = (F0Δl λ/(4πmg))(1 + 4π²/λ²).
Teacher's Note: Displacement resonance occurs below ω0: minimise the denominator to get ω² = ω0² − 2β².
Exam Note: Give ω_res and a_res both in terms of λ and Δl.
Question 86. The forced harmonic oscillations have equal displacement amplitudes at frequencies ω1 = 400 s−1 and ω2 = 600 s−1. Find the resonance frequency at which the displacement amplitude is maximum.
Solution.
Since a = (F0/m)/√((ω² − ω0² + 2β²)² + 4β²(ω0² − β²)), we must have
ω1² − ω0² + 2β² = −(ω2² − ω0² + 2β²),
or ω0² − 2β² = (ω1² + ω2²)/2 = ωres².
Numerically ωres = √((400² + 600²)/2) = √260000 ≈ 510 s−1.
Teacher's Note: Amplitude depends on (ω² − ω0² + 2β²)²; equal amplitudes means the two brackets are equal and opposite.
Exam Note: Result: ω_res = √((ω1² + ω2²)/2).
Question 87. The velocity amplitude of a particle is equal to half the maximum value at the frequencies ω1 and ω2 of external harmonic force. Find: (a) the frequency corresponding to the velocity resonance; (b) the damping coefficient β and the damped oscillation frequency ω of the particle.
Solution.
The displacement is x = (F0/m)[(ω0² − ω²) cos ωt + 2βω sin ωt]/√((ω0² − ω²)² + 4β²ω²). Then
ẋ = (F0ω/m)[2βω cos ωt + (ω² − ω0²) sin ωt]/((ω0² − ω²)² + 4β²ω²).
Thus the velocity amplitude is
V0 = F0ω/(m√((ω0² − ω²)² + 4β²ω²)) = F0/(m√((ω0²/ω − ω)² + 4β²)).
This is maximum when ω² = ω0², and then V0,res = F0/(2mβ).
Now at half maximum, (ω0²/ω − ω)² = 12β², or ω² ± 2√3βω − ω0² = 0, so ω = ∓β√3 + √(ω0² + 3β²), where we have rejected the solution with the negative sign before the radical. Writing
ω1 = √(ω0² + 3β²) + β√3, ω2 = √(ω0² + 3β²) − β√3,
we get (a) ωres = ω0 = √(ω1ω2) (velocity resonance frequency);
(b) β = |ω1 − ω2|/(2√3), and the damped oscillation frequency
√(ω0² − β²) = √(ω1ω2 − (ω1 − ω2)²/12).
Teacher's Note: Velocity resonance sits exactly at ω0 (unlike displacement resonance); half-power points are symmetric in the product ω1ω2 = ω0².
Exam Note: Half-maximum condition gives (ω0²/ω − ω)² = 12β².
Question 88. A certain resonance curve describes a mechanical oscillating system with logarithmic damping decrement λ = 1.60. For this curve find the ratio of the maximum displacement amplitude to the displacement amplitude at a very low frequency.
Solution.
In general for displacement amplitude a = (F0/m)/√((ω0² − ω²)² + 4β²ω²) = (F0/m)/√((ω² − ω0² + 2β²)² + 4β²(ω0² − β²)).
Thus η = ares/alow = ω0²/√(4β²(ω0² − β²)) = ω0²/(2β√(ω0² − β²)).
But β/ω0 = (λ/2π)/√(1 + (λ/2π)²) and λ/2π = β/√(ω0² − β²). Hence
η = (ω0²/(2β²))(λ/2π) = ½ (1 + (λ/2π)²)/(λ/2π).
Corrected: the book prints 2.90; evaluating with λ = 1.60 gives λ/2π = 0.2546, so η = ½(1 + 0.0648)/0.2546 = 2.09 ≈ 2.1.
Teacher's Note: Low-frequency amplitude is F0/(mω0²); divide the resonance peak by it and express through λ.
Exam Note: Evaluate η = (1 + (λ/2π)²)/(2λ/2π) carefully: 2.09.
Question 89. Due to the external vertical force Fx = F0 cos ωt a body suspended by a spring performs forced steady-state oscillations according to the law x = a cos(ωt − φ). Find the work performed by the force F during one oscillation period.
Solution.
The work done in one cycle is
A = ∫F dx = ∫0T F v dt = ∫0T F0 cos ωt (−ωa sin(ωt − φ)) dt
= ∫0T F0ωa (−cos ωt sin ωt cos φ + cos² ωt sin φ) dt = πaF0 sin φ.
(Explicitly: ∫0T cos ωt sin ωt dt = 0 and ∫0T cos² ωt dt = T/2, so A = F0ωa sin φ · T/2 = πaF0 sin φ.)
Teacher's Note: Only the component of force in phase with velocity does work; the cos-sin cross term averages to zero.
Exam Note: Final result A = π a F0 sin φ.
Question 90. A ball of mass m = 50 g is suspended by a weightless spring with stiffness κ = 20.0 N/m. Due to external vertical harmonic force with frequency ω = 25.0 s−1 the ball performs steady-state oscillations with amplitude a = 1.3 cm. In this case the displacement of the ball lags in phase behind the external force by φ = 3π/4. Find: (a) the quality factor of the given oscillator; (b) the work performed by the external force during one oscillation period.
Solution.
In the formula x = a cos(ωt − φ) we have a = (F0/m)/√((ω0² − ω²)² + 4β²ω²) and tan φ = 2βω/(ω0² − ω²). Thus β = (ω0² − ω²) tan φ/(2ω).
Hence ω0 = √(κ/m) = 20 s−1, and β = (400 − 625)(−1)/(2 × 25) = 4.5 s−1.
(a) The quality factor
Q = π/(βT) = √(ω0² − β²)/(2β) = ½√(4ω²ω0²/((ω0² − ω²)² tan²φ) − 1) = 2.17.
(b) The work done is
A = πaF0 sin φ = πma²√((ω0² − ω²)² + 4β²ω²) sin φ = πma² × 2βω = πma²(ω0² − ω²) tan φ = 6 mJ.
Teacher's Note: Phase lag fixes β through tan φ = 2βω/(ω0² − ω²); work per cycle equals dissipation, 2πmβωa².
Exam Note: Here φ > π/2, so ω > ω0; keep tan φ negative.
Question 91. A ball of mass m suspended by a weightless spring can perform vertical oscillations with damping coefficient β. The natural oscillation frequency is equal to ω0. Due to the external vertical force varying as Fx = F0 cos ωt the ball performs steady-state harmonic oscillations. Find: (a) the mean power ⟨P⟩ developed by the force F, averaged over one oscillation period; (b) the frequency ω of the force F at which ⟨P⟩ is maximum; what is ⟨P⟩max equal to?
Solution.
Here as usual tan φ = 2βω/(ω0² − ω²), where φ is the phase lag of the displacement x = a cos(ωt − φ), a = (F0/m)/√((ω0² − ω²)² + 4β²ω²).
(a) Mean power developed by the force over one oscillation period
⟨P⟩ = πF0a sin φ/T = ½F0aω sin φ = (F0²/m) βω²/((ω0² − ω²)² + 4β²ω²) = (F0²β/m) · 1/((ω0²/ω − ω)² + 4β²).
(b) Mean power ⟨P⟩ is maximum when ω = ω0 (for the denominator is then minimum). Also
⟨P⟩max = F0²/(4mβ).
Teacher's Note: Mean power ½F0aω sin φ peaks at ω = ω0, where force and velocity are in phase.
Exam Note: Show ⟨P⟩ = (F0²β/m)/[(ω0²/ω − ω)² + 4β²].
Question 92. An external harmonic force F whose frequency can be varied, with amplitude maintained constant, acts in a vertical direction on a ball suspended by a weightless spring. The damping coefficient is η times less than the natural oscillation frequency ω0 of the ball. How much, in per cent, does the mean power ⟨P⟩ developed by the force F at the frequency of displacement resonance differ from the maximum mean power ⟨P⟩max? Averaging is performed over one oscillation period.
Solution.
Given β = ω0/η. Then from the previous problem
⟨P⟩ = (F0²ω0/(ηm)) · 1/((ω0²/ω − ω)² + 4ω0²/η²).
At displacement resonance ω² = ω0² − 2β²:
⟨P⟩res = (F0²ω0/(ηm)) · 1/(4β⁴/(ω0² − 2β²) + 4ω0²/η²) = (F0²ω0/(ηm)) · 1/((4ω0⁴/η⁴)/(ω0²(1 − 2/η²)) + 4ω0²/η²)
= (F0²/(4ηmω0)) · η²/(1/(η² − 2) + 1) = (F0²η/(4mω0)) · (η² − 2)/(η² − 1),
while ⟨P⟩max = F0²η/(4mω0). Thus
(⟨P⟩max − ⟨P⟩res)/⟨P⟩max = 100/(η² − 1) %.
Teacher's Note: Displacement resonance (ω² = ω0² − 2β²) sits slightly below the power peak at ω0, so power is slightly lower.
Exam Note: Result: 100/(η² − 1) per cent.
Question 93. A uniform horizontal disc fixed at its centre to an elastic vertical rod performs forced torsional oscillations due to the moment of forces Nz = Nm cos ωt. The oscillations obey the law φ = φm cos(ωt − α). Find: (a) the work performed by the friction forces acting on the disc during one oscillation period; (b) the quality factor of the given oscillator if the moment of inertia of the disc relative to the axis is equal to I.
Solution.
The equation of the disc is φ̈ + 2βφ̇ + ω0²φ = Nm cos ωt/I. Then as before φ = φm cos(ωt − α), where
φm = Nm/(I[(ω0² − ω²)² + 4β²ω²]1/2), tan α = 2βω/(ω0² − ω²).
(a) Work performed by frictional forces = ∫Nfr dφ, where Nfr = −2Iβφ̇:
= −∫0T 2βIφ̇² dt = −2πβωIφm² = −πIφm²[(ω0² − ω²)² + 4β²ω²]1/2 sin α = −πNmφm sin α.
(b) The quality factor
Q = π/λ = π/(βT) = √(ω0² − β²)/(2β) = ω√(ω0² − β²)/((ω0² − ω²) tan α) = (1/(2 tan α)) {4ω²ω0²/(ω0² − ω²)² − 4β²ω²/(ω0² − ω²)²}1/2
= (1/(2 tan α)) {4ω²ω0²I²φm²/(Nm²cos²α) − tan²α}1/2, since ω0² = ω² + (Nm/(Iφm)) cos α,
= (1/(2 sin α)) {4ω²ω0²I²φm²/Nm² − sin²α}1/2
= (1/(2 sin α)) {(4I²φm²/Nm²)ω⁴ + (4Iφm/Nm)ω² cos α + cos²α − 1}1/2
= (1/(2 sin α)) {(2Iφmω²/Nm + cos α)² − 1}1/2.
Teacher's Note: Friction work per cycle is −πNmφm sin α, minus the driver's work; eliminate β, ω0.
Exam Note: Use (ω0² − ω²)φm = (Nm/I) cos α to eliminate ω0.
Download IE Irodov Solutions for JEE Math PDF
Complete Math Solutions for IE Irodov Solutions Chapter 23 Mechanical Oscillations Part 3
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 23 Mechanical Oscillations Part 3 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Detailed Calculation Guides for JEE
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.