IE Irodov Solutions Chapter 23 Mechanical Oscillations Part 2

IE Irodov Solutions for JEE Physics: Chapter 23 Mechanical Oscillations

Review structured textbook solutions for JEE Physics Chapter 23 Mechanical Oscillations prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Physics Solutions: Chapter 23 Mechanical Oscillations

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 23 Mechanical Oscillations - Questions 36 to 61

Mechanical Oscillations (Parts 4 and 5)

Question 36. A body of mass m was suspended by a non-stretched spring, and then set free without push. The stiffness of the spring is κ. Neglecting the mass of the spring, find: (a) the law of motion y(t), where y is the displacement of the body from the equilibrium position; (b) the maximum and minimum tensions of the spring in the process of motion.

Solution.

(a) Let y(t) be the displacement of the body from the end of the unstretched position of the spring (not from the equilibrium position). Then

mÿ = −κy + mg

This equation has a solution of the form y = A + B cos(ωt + α), which satisfies it if

−mω2B cos(ωt + α) = −κ[A + B cos(ωt + α)] + mg

Then ω2 = κ/m and A = mg/κ.

We have y = 0 and ẏ = 0 at t = 0. So −ωB sin α = 0 and A + B cos α = 0. Since B > 0 and A > 0, we must have α = π, and B = A = mg/κ. Hence

y = (mg/κ)(1 − cos ωt), ω = √(κ/m).

(Measured from the equilibrium position the displacement is −(mg/κ) cos ωt.)

(b) Tension in the spring is T = κy = mg(1 − cos ωt), so Tmax = 2mg, Tmin = 0.

Teacher's Note: Released from the natural length, amplitude equals the static stretch mg/κ, so the spring swings between 0 and twice that.

Exam Note: Write ODE, state initial conditions, then T = κy.

Question 37. A particle of mass m moves due to the force F = −αmr, where α is a positive constant, r is the radius vector of the particle relative to the origin of coordinates. Find the trajectory of its motion if at the initial moment r = r0i and the velocity v = v0j, where i and j are the unit vectors of the x and y axes.

Solution.

In accordance with the problem F = −αmr, so m(ẍi + ÿj) = −αm(xi + yj). Thus ẍ = −αx and ÿ = −αy.

The solution of ẍ = −αx is x = a cos(ω0t + δ), where ω02 = α (1), so ẋ = −aω0 sin(ω0t + δ) (2).

From the initial conditions, vx = 0 and x = r0 at t = 0. So from (2) δ = 0, and (1) takes the form x = r0 cos ω0t, i.e. cos ω0t = x/r0 (3).

For ÿ = −αy the solution is y = a′ sin(ω0t + δ′). Since y = 0 at t = 0, δ′ = 0 and y = a′ sin ω0t, so ẏ = a′ω0 cos ω0t. But ẏ = v0 at t = 0, so v0 = a′ω0, a′ = v0/ω0. Hence

y = (v0/ω0) sin ω0t, i.e. sin ω0t = ω0y/v0 (4).

Squaring and adding (3) and (4): sin2ω0t + cos2ω0t = ω02y2/v02 + x2/r02, or

(x/r0)2 + α(y/v0)2 = 1 (as α = ω02), an ellipse.

Teacher's Note: Each axis is independent SHM with the same ω; different amplitudes give an ellipse.

Exam Note: Eliminate t using sin²+cos²=1.

Question 38. A body of mass m is suspended from a spring fixed to the ceiling of an elevator car. The stiffness of the spring is κ. At the moment t = 0 the car starts going up with an acceleration w. Neglecting the mass of the spring, find the law of motion y(t) of the body relative to the elevator car if y(0) = 0 and ẏ(0) = 0. Consider the following two cases: (a) w = const; (b) w = αt, where α is a constant.

Solution.

(a) The elevator car is a translating non-inertial frame, so the body m experiences an inertial force mw directed downward in addition to the real forces. From Newton's second law in projection form Fy = mwy for the body in the frame of the car (y measured downward from the initial position, where the spring is already stretched by mg/κ):

−κ(mg/κ + y) + mg + mw = mÿ (A)

so mÿ = −κy + mw = −κ(y − mw/κ), or

d2/dt2(y − mw/κ) = −(κ/m)(y − mw/κ) (1)

This is S.H.M. and its solution is y − mw/κ = a sin(√(κ/m) t + α′) (2). Differentiating, ẏ = a√(κ/m) cos(√(κ/m) t + α′) (3).

Using y(0) = 0 in (2): a sin α′ = −mw/κ. Using ẏ(0) = 0 in (3): a cos α′ = 0. Thus α′ = −π/2 and a = mw/κ. Hence

y = (mw/κ)(1 − cos √(κ/m) t).

(b) Proceed up to (1). With w = αt and ω0 = √(κ/m), the solution is of the form

y − αt/ω02 = a sin(ω0t + δ) (4).

From y(0) = 0: 0 = a sin δ, so δ = 0. Then y − αt/ω02 = a sin ω0t (5). Differentiating, ẏ − α/ω02 = aω0 cos ω0t (6). From ẏ(0) = 0: −α/ω02 = aω0, so a = −α/ω03. Putting this in (5):

y = (α/ω03)(ω0t − sin ω0t).

Teacher's Note: Pseudo force mw shifts the equilibrium to mw/κ; solve SHM about the shifted point using initial conditions.

Exam Note: Add pseudo force −mw; w is acceleration, not ω.

Question 39. A body of mass m = 0.50 kg is suspended from a rubber cord with elasticity coefficient κ = 50 N/m. Find the maximum distance over which the body can be pulled down for the body's oscillations to remain harmonic. What is the energy of oscillation in this case?

Solution.

There is an important difference between a rubber cord and a spring. A spring can be stretched or compressed and in both cases obeys Hooke's law. But a rubber cord becomes loose when one tries to compress it and does not then obey Hooke's law. Thus if we suspend a body by a rubber cord it stretches by a distance mg/κ in reaching the equilibrium configuration. If we further stretch it by a distance Δh and release it, the body will execute harmonic oscillations if Δh ≤ mg/κ, because only in this case will the cord remain taut and obey Hooke's law. Thus

Δhmax = mg/κ

The energy of oscillation in this case is

½κ(Δhmax)2 = ½ m2g2/κ.

Numerically (g = 9.8 m/s2): Δhmax = 0.50 × 9.8/50 = 0.098 m ≈ 10 cm and the energy ≈ 0.24 J.

Teacher's Note: Harmonic only while the cord stays taut: amplitude cannot exceed the static extension mg/κ.

Exam Note: Give the symbolic result and the numbers 10 cm, 0.24 J.

Question 40. A body of mass m fell from a height h onto the pan of a spring balance (Fig. 4.10). The masses of the pan and the spring are negligible, the stiffness of the latter is κ. Having stuck to the pan, the body starts performing harmonic oscillations in the vertical direction. Find the amplitude and the energy of these oscillations.

mhFig. 4.10

Solution.

As the pan is of negligible mass, there is no loss of kinetic energy even though the collision is inelastic. The mechanical energy of the body m in the field generated by the joint action of the gravity force and the elastic force is conserved, i.e. ΔE = 0. Between the initial position and the final position (maximum compression of the spring) ΔT = 0, and therefore ΔU = ΔUgr + ΔUsp = 0, or

−mg(h + x) + ½κx2 = 0.

On solving this quadratic equation: x = mg/κ ± √(m2g2/κ2 + 2mgh/κ). As the minus sign is not acceptable,

x = mg/κ + √(m2g2/κ2 + 2mgh/κ).

If the body were at rest on the spring, the position of m would be its equilibrium position, where the resultant force is zero. The equilibrium compression is given by κΔx = mg, Δx = mg/κ. Therefore the separation between the equilibrium position and an extreme position, i.e. the amplitude, is

a = x − Δx = √(m2g2/κ2 + 2mgh/κ) = (mg/κ)√(1 + 2κh/(mg)).

The mechanical energy of oscillation, which is conserved, equals E = Uextreme, because at the extreme position the kinetic energy is zero. Although the weight of the body is a conservative force, it is not restoring in this problem, hence Uextreme is concerned only with the spring force. Therefore

E = ½κa2 = mgh + m2g2/(2κ).

Teacher's Note: Energy conservation gives maximum compression; amplitude is that minus the static compression mg/κ.

Exam Note: Amplitude is measured from equilibrium, not from the natural length.

Question 41. Solve the foregoing problem for the case of the pan having a mass M. Find the oscillation amplitude in this case.

Solution.

Unlike the previous problem (4.40), the kinetic energy of the body m decreases due to the perfectly inelastic collision with the pan. The body strikes the pan with velocity v0 = √(2gh). If v is the common velocity of the body + pan system just after the collision, then from conservation of linear momentum

mv0 = (M + m)v, so v = mv0/(M + m) = m√(2gh)/(M + m). (1)

At the moment the body strikes the pan, the spring is compressed by Mg/κ due to the weight of the pan. If l is the further compression of the spring, then from conservation of mechanical energy of the system in the field of gravity and spring force

½(M + m)v2 + (M + m)gl = ½κ(Mg/κ + l)2 − ½κ(Mg/κ)2

Using (1) this reduces to ½κl2 − mgl − m2gh/(m + M) = 0. Thus

l = [mg ± √(m2g2 + 2κm2gh/(M + m))]/κ.

The minus sign is not acceptable, so l = mg/κ + (1/κ)√(m2g2 + 2κm2gh/(M + m)).

If the oscillating system were at rest, it would correspond to its equilibrium position, where the spring is compressed by (M + m)g/κ. Therefore the amplitude of oscillation is a = Mg/κ + l − (M + m)g/κ = l − mg/κ, i.e.

a = (mg/κ)√(1 + 2κh/((M + m)g)).

Corrected: the printed answer has 1 + 2hκ/(mg) under the root, which omits the factor (M + m); the working above gives the form shown (it reduces to Problem 40 for M = 0).

The oscillation energy is E = Uextreme = ½κa2 (the spring force is the only restoring force, not the weight). Alternatively E = Tmean = ½(M + m)a2ω2 = ½(M + m)a2·κ/(M + m) = ½κa2.

Teacher's Note: Perfectly inelastic collision first (momentum), then energy conservation; the pan's weight shifts the starting compression.

Exam Note: Momentum for collision, energy for compression; do not mix them.

Question 42. A particle of mass m moves in the plane xy due to the force varying with velocity as F = a(ẏi − ẋj), where a is a positive constant, i and j are the unit vectors of the x and y axes. At the initial moment t = 0 the particle was located at the point x = y = 0 and possessed a velocity v0 directed along the unit vector j. Find the law of motion x(t), y(t) of the particle, and also the equation of its trajectory.

Solution.

F = a(ẏi − ẋj), so m(ẍi + ÿj) = a(ẏi − ẋj). So mẍ = aẏ and mÿ = −aẋ (1).

From the initial conditions, at t = 0, ẋ = 0 and y = 0. Integrating mẍ = aẏ gives ẋ = (a/m)y (2). Using (2) in mÿ = −aẋ: ÿ = −(a/m)2y (3).

One solution of (3) is y = A sin(ω0t + α), where ω0 = a/m. As y = 0 at t = 0, y = A sin ω0t, so ẏ = Aω0 cos ω0t. At t = 0, ẏ = v0, so A = v0/ω0. Thus

y = (v0/ω0) sin ω0t (4).

From (2), ẋ = v0 sin ω0t; integrating, x = B − (v0/ω0) cos ω0t. With x = 0 at t = 0, B = v0/ω0. Hence

x = (v0/ω0)(1 − cos ω0t) (6), with ω0 = a/m.

From (4) and (6): [x − v0/ω0]2 + y2 = (v0/ω0)2, a circle of radius v0/ω0 = mv0/a with centre at x0 = v0/ω0, y0 = 0.

Teacher's Note: Force perpendicular to velocity does no work: speed constant, path a circle of radius mv0/a.

Exam Note: Integrate once to link ẋ and y, then solve SHM.

Question 43. A pendulum is constructed as a light thin-walled sphere of radius R filled up with water and suspended at the point O from a light rigid rod. The distance between the point O and the centre of the sphere is equal to l. How many times will the small oscillations of such a pendulum change after the water freezes? The viscosity of water and the change of its volume on freezing are to be neglected.

Solution.

If the water has frozen, the system of the light rod and the frozen water in the hollow sphere constitutes a compound (physical) pendulum to a very good approximation, because we can take the whole system to be rigid. For such systems the time period is

T1 = 2π√(l/g) √(1 + k2/l2), where k2 = (2/5)R2 is the square of the radius of gyration of the sphere.

The situation is different when the water is unfrozen. When dissipative forces (viscosity) are neglected, we are dealing with an ideal fluid. Such fluids respond instantaneously to unbalanced internal stresses. Suppose the sphere with liquid water actually executes small rigid oscillations. Then the portion of the fluid above the centre of the sphere would have a greater acceleration than the portion below the centre, because the linear acceleration of any element equals its angular acceleration multiplied by its distance from the centre of suspension. Then, in a frame moving with the centre of mass, an unbalanced couple appears (not negated by any pseudo forces) which causes the fluid to move rotationally so as to destroy the differences in acceleration. Thus for ideal fluids the pendulum must move in such a way that all elements of the fluid undergo the same acceleration. This implies a simple (mathematical) pendulum with time period

T0 = 2π√(l/g).

Thus T1 = T0 √(1 + (2/5)(R/l)2), i.e. the period increases by this factor after freezing.

(One expects that a liquid with very small viscosity will have a period close to T0, while one with high viscosity will have a period closer to T1.)

Teacher's Note: Frozen sphere is a physical pendulum with I = ml² + (2/5)mR²; ideal liquid behaves as a point-mass pendulum.

Exam Note: Factor is √(1 + 2R²/5l²); state period increases.

Question 44. Find the frequency of small oscillations of a thin uniform vertical rod of mass m and length l hinged at the point O (Fig. 4.12). The combined stiffness of the springs is equal to κ. The mass of the springs is negligible. (The rod hangs from the hinge O at its upper end; the springs act horizontally at its lower end.)

Solution.

Let the rod make a small angle θ with the vertical. Both gravity and the spring forces are restoring conservative forces, so the mechanical energy of the oscillating system is conserved:

½(ml2/3)θ̇2 + (mgl/2)(1 − cos θ) + ½κ(lθ)2 = constant.

Differentiating with respect to time and using sin θ ≈ θ:

(ml2/3)θ̈ + (mgl/2)θ + κl2θ = 0, so θ̈ = −(3g/2l + 3κ/m)θ = −(3g/2l)(1 + 2κl/(mg))θ.

Hence ω0 = √[(3g/2l)(1 + 2κl/(mg))] = √(3g/2l + 3κ/m).

Corrected: the printed answer has (1 + κl/mg); the printed intermediate equation itself gives 3g/2l + 3κ/m, i.e. the factor 2κl/(mg), as shown above.

Teacher's Note: Restoring torques from gravity (mgl/2) and springs (κl²) add; moment of inertia about the hinge is ml²/3.

Exam Note: Spring term is 3κ/m; do not drop the factor 2.

Question 45. A uniform rod of mass m = 1.5 kg suspended by two identical threads l = 90 cm in length (Fig. 4.13) was turned through a small angle about the vertical axis passing through its middle point C. The threads deviated in the process through an angle α = 5.0°. Then the rod was released to start performing small oscillations. Find: (a) the oscillation period; (b) the rod's oscillation energy. (The rod hangs horizontally from the lower ends of two vertical threads of length l attached to the ceiling.)

Solution.

(a) Let the threads be deviated through an angle α′ < α during the oscillations. From conservation of mechanical energy:

½(mL2/12)θ̇2 + mgl(1 − cos α′) = constant (1)

where L is the length of the rod and θ is the angular deviation of the rod from its equilibrium position. Differentiating with respect to time:

(L2/12)θ̇θ̈ + glα′α̇′ = 0 (for small α′, sin α′ ≈ α′) (2)

From the figure, (L/2)θ = lα′, or α′ = Lθ/(2l), so α̇′ = Lθ̇/(2l). Putting these in (2): d2θ/dt2 = −(3g/l)θ. Thus the period is

T = 2π/ω0 = 2π√(l/3g) ≈ 1.1 s.

(b) The oscillation energy is E = Uextreme = mgl(1 − cos α) = 2mgl sin2(α/2) ≈ 2mgl·α2/4, so

E = mglα2/2 ≈ 50 mJ (α = 5.0° = 0.0873 rad; 1.5 × 9.8 × 0.90 × 0.08732/2 = 0.050 J).

Teacher's Note: Twisting the rod lifts it; restoring torque gives ω² = 3g/l independent of rod mass and length.

Exam Note: Relate thread angle to twist angle: α′ = Lθ/2l.

Question 46. An arrangement illustrated in Fig. 4.14 consists of a horizontal uniform disc D of mass m and radius R and a thin rod AO whose torsional coefficient is equal to k. Find the amplitude and the energy of small torsional oscillations if at the initial moment the disc was deviated through an angle φ0 from the equilibrium position and then imparted an angular velocity φ̇0. (The disc hangs horizontally from the lower end of the vertical rod AO, whose upper end A is fixed.)

Solution.

The kinetic energy of the disc is ½Iφ̇2 = ½(mR2/2)φ̇2 = ¼mR2φ̇2. The torsional potential energy is ½kφ2. Thus the total energy is

¼mR2φ̇2 + ½kφ2 = ¼mR2φ̇02 + ½kφ02.

By definition of the amplitude, φ̇ = 0 when φ = φm. Thus the total energy is

E = ½kφm2 = ¼mR2φ̇02 + ½kφ02,

or φm = φ0√(1 + mR2φ̇02/(2kφ02)) = √(φ02 + mR2φ̇02/(2k)).

Teacher's Note: Total energy is conserved; at the turning point all of it is torsional potential energy ½kφm².

Exam Note: Use I = mR²/2 for a disc about its axis.

Question 47. A uniform rod of mass m and length l performs small oscillations about the horizontal axis passing through its upper end. Find the mean kinetic energy of the rod averaged over one oscillation period if at the initial moment it was deflected from the vertical by an angle θ0 and then imparted an angular velocity θ̇0.

Solution.

The moment of inertia of the rod about one end, perpendicular to its length, is ml2/3. Thus the rotational kinetic energy is ½(ml2/3)θ̇2 = (ml2/6)θ̇2.

When the rod is displaced by an angle θ its centre of gravity goes up by (l/2)(1 − cos θ) ≈ lθ2/4 for small θ, so the potential energy is mglθ2/4. As the mechanical energy is conserved,

½(ml2/3)θ̇2 + ½(mgl/2)θ2 = constant.

Differentiating with respect to time and simplifying, θ̈ = −(3g/2l)θ for small θ, so the angular frequency is ω = √(3g/2l). The general solution is θ = A cos ωt + B sin ωt. But θ = θ0 at t = 0, so A = θ0; and θ̇ = θ̇0 at t = 0, so B = θ̇0/ω. Thus θ = θ0 cos ωt + (θ̇0/ω) sin ωt.

Kinetic energy T = (ml2/6)θ̇2 = (ml2/6)[−ωθ0 sin ωt + θ̇0 cos ωt]2 = (ml2/6)[θ̇02 cos2ωt + ω2θ02 sin2ωt − 2ωθ0θ̇0 sin ωt cos ωt].

On averaging over one period the last term vanishes and ⟨sin2ωt⟩ = ⟨cos2ωt⟩ = 1/2. Thus

⟨T⟩ = (1/12)ml2θ̇02 + (1/8)mglθ02 (where ω2 = 3g/2l).

Teacher's Note: Mean of sin² and cos² over a period is 1/2 and the cross term averages to zero.

Exam Note: Use ω² = 3g/2l to convert ω²θ0² into g l terms.

Question 48. A physical pendulum is positioned so that its centre of gravity is above the suspension point. From that position the pendulum started moving toward the stable equilibrium and passed it with an angular velocity ω. Neglecting the friction find the period of small oscillations of the pendulum.

Solution.

Let l be the distance between the centre of gravity C of the pendulum and its point of suspension O. Originally the pendulum is inverted and its centre of gravity is above O. When it falls to the normal (stable) equilibrium position its centre of gravity has fallen by 2l. In the equilibrium position the total energy equals the kinetic energy ½Iω2, so from energy conservation

½Iω2 = mg·2l, or I = 4mgl/ω2.

The angular frequency of small oscillations of a physical pendulum is given by ω02 = mgl/I. Hence

T = 2π√(I/mgl) = 2π√((4mgl/ω2)/(mgl)) = 4π/ω.

Teacher's Note: Energy conservation from the inverted position fixes I in terms of ω; then T = 2π√(I/mgl).

Exam Note: Centre of gravity falls 2l, not l.

Question 49. A physical pendulum performs small oscillations about the horizontal axis with frequency ω1 = 15.0 s−1. When a small body of mass m = 50 g is fixed to the pendulum at a distance l = 20 cm below the axis, the oscillation frequency becomes equal to ω2 = 10.0 s−1. Find the moment of inertia of the pendulum relative to the oscillation axis.

Solution.

Let the moment of inertia of the pendulum about the axis be I, its mass M, and let x be the distance of its centre of gravity from the axis. From the torque equation for small θ:

−Mgx sin θ = Iθ̈, or θ̈ = −(Mgx/I)θ.

This is the equation of S.H.M., so ω1 = √(Mgx/I), or Mgx = Iω12 (1).

Now, when the mass m is attached at a distance l below the axis,

−Mgx sin θ′ − mgl sin θ′ = (I + ml2) d2θ′/dt2, so θ̈′ = −[g(Mx + ml)/(I + ml2)]θ′ (small θ′),

which is again S.H.M. with ω2 = √(g(Mx + ml)/(I + ml2)) (2).

Solving (1) and (2): ω22 = (Iω12 + mgl)/(I + ml2), or I(ω22 − ω12) = mgl − ml2ω22, and hence

I = ml2(ω22 − g/l)/(ω12 − ω22) = 0.8 g·m2 (= 8 × 10−4 kg·m2; check: 0.05 × 0.04 × (100 − 49)/(225 − 100) = 8.2 × 10−4 kg·m2, with g = 9.8 m/s2).

Teacher's Note: Eliminate M·x using ω1²: the added body contributes torque mgl and inertia ml².

Exam Note: Eliminate Mgx between the two frequency equations.

Question 50. Two physical pendulums perform small oscillations about the same horizontal axis with frequencies ω1 and ω2. Their moments of inertia relative to the given axis are equal to I1 and I2 respectively. In a state of stable equilibrium the pendulums were fastened rigidly together. What will be the frequency of small oscillations of the compound pendulum?

Solution.

I1θ̈ = −ω12I1θ + G and I2θ̈ = −ω22I2θ − G, where ±G is the torque of mutual interactions. We have written the restoring torques on each pendulum in the absence of the other as −ω12I1θ and −ω22I2θ respectively. Adding, (I1 + I2)θ̈ = −(I1ω12 + I2ω22)θ, so

θ̈ = −[(I1ω12 + I2ω22)/(I1 + I2)]θ = −ω2θ.

Hence ω = √[(I1ω12 + I2ω22)/(I1 + I2)].

Teacher's Note: Restoring torques and moments of inertia both add; the internal torques G cancel.

Exam Note: Each ω² I is the restoring torque coefficient; sum them.

Question 51. A uniform rod of length l performs small oscillations about the horizontal axis OO′ perpendicular to the rod and passing through one of its points. Find the distance between the centre of inertia of the rod and the axis OO′ at which the oscillation period is the shortest. What is it equal to?

Solution.

Let the rod be at a small angular position θ relative to its equilibrium position and let a be the sought distance. From conservation of mechanical energy of oscillation:

mga(1 − cos θ) + ½IOO′θ̇2 = constant.

Differentiating with respect to time, mga sin θ θ̇ + IOO′θ̇θ̈ = 0. But IOO′ = ml2/12 + ma2 and for small θ, sin θ ≈ θ, so

θ̈ = −[ga/(l2/12 + a2)]θ.

Hence the period of one full oscillation is T = 2π√[(l2/12 + a2)/(ag)], or T2 = (4π2/g)(l2/(12a) + a).

For Tmin, d/da[l2/(12a) + a] = 0, so −l2/(12a2) + 1 = 0, giving a = l/(2√3). Hence

Tmin = 2π√(l/(g√3)).

Teacher's Note: Parallel-axis theorem gives I = ml²/12 + ma²; minimise T² with respect to a.

Exam Note: Differentiate T² (not T) and quote both a and Tmin.

Question 52. A thin uniform plate shaped as an equilateral triangle with a height h performs small oscillations about the horizontal axis coinciding with one of its sides. Find the oscillation period and the reduced length of the given pendulum.

Solution.

Consider the moment of inertia of the triangular plate about the side AB (the plate hangs with AB at the top and vertex C at distance h below). Taking a strip of thickness dx at distance x from AB, its length is ((h − x)/h)(2h/√3), so

I = ∬x2 dm = ∫0h x2ρ dx ((h − x)/h)(2h/√3) = (2ρ/√3)∫0h x2(h − x) dx = (2ρ/√3)(h4/3 − h4/4) = ρh4/(6√3) = mh2/6,

using the area of the triangle h2/√3 and m = ρ × area.

Thus K.E. = ½(mh2/6)θ̇2. The centre of mass is at distance h/3 below AB, so P.E. = mg(h/3)(1 − cos θ) ≈ ½(mgh/3)θ2, where θ is the angle the instantaneous plane of the plate makes with the vertical equilibrium position (the plate rotates as a rigid body). Thus

E = ½(mh2/6)θ̇2 + ½(mgh/3)θ2, hence ω2 = (mgh/3)/(mh2/6) = 2g/h.

T = 2π√(h/2g) = π√(2h/g) and lreduced = h/2.

Teacher's Note: Triangle about its side has I = mh²/6 and centre of mass h/3 below; reduced length is I/(m·h/3).

Exam Note: Reduced length h/2 follows from ω² = g/l_reduced.

Question 53. A smooth horizontal disc rotates about the vertical axis O (Fig. 4.15) with a constant angular velocity ω. A thin uniform rod AB of length l performs small oscillations about the vertical axis A fixed to the disc at a distance a from the axis of the disc. Find the frequency ω0 of these oscillations.

Solution.

Go to the rotating frame in which the disc is stationary. In this frame the rod is subjected to Coriolis and centrifugal forces: Fcor = ∫2dm(v′ × ω) and Fcf = ∫dm ω2r, where r = OP = OA + AP is the position of an elemental mass of the rod relative to the disc centre O, and v′ = dr/dt = d(AP)/dt (since OA is constant).

As the rod vibrates transversely, v′ is perpendicular to the length of the rod. Hence 2dm(v′ × ω) for each element is directed along PA, so the net torque of the Coriolis force about A is zero.

The torque of the centrifugal force about A (with the rod turned by a small angle θ from the line OA extended, an element at distance s from A, mass (m/l)ds):

τcf(A) = ∫AP × (m/l)ds ω2(OA + AP) = ∫AP × (m/l)ds ω2OA (the term with AP × AP vanishes) = (m/l)ω2a sin θ (−k)∫0ls ds = mω2a(l/2) sin θ (−k).

So τcf(z) = −mω2a(l/2) sin θ. From the equation of rotational dynamics τA(z) = IAβz:

−mω2a(l/2) sin θ = (ml2/3)θ̈, or θ̈ = −(3/2)(ω2a/l) sin θ.

For small θ, θ̈ = −(3ω2a/2l)θ. This implies that the frequency of oscillation is

ω0 = √(3ω2a/2l) = ω√(3a/2l).

Teacher's Note: In the disc frame the centrifugal torque about A acts like gravity on a physical pendulum; the Coriolis torque vanishes.

Exam Note: State that Coriolis torque is zero; use I = ml²/3 about A.

Question 54. Find the frequency of small oscillations of the arrangement illustrated in Fig. 4.16. The radius of the pulley is R, its moment of inertia relative to the rotation axis is I, the mass of the body is m, and the spring stiffness is κ. The mass of the thread and the spring is negligible, the thread does not slide over the pulley, there is no friction in the axis of the pulley. (The body hangs from a thread passing over the pulley; the other end of the thread is tied to a spring whose lower end is fixed to the floor.)

Solution.

The system consists of the pulley and the block. Choose an inertial frame and direct the x-axis vertically downward from the equilibrium position of the block.

Initially the system is in equilibrium. For the block, T0 = mg (1). For the rotational equilibrium of the pulley, κΔl·R = T0R, or T0 = κΔl (2). From (1) and (2), Δl = mg/κ (3).

Now disturb the equilibrium. At an arbitrary position, from Newton's second law for the block: mg − T = mẍ (4). For the pulley, Nz = Iβz: TR − κ(Δl + x)R = Iθ̈ (5). But ẍ = Rθ̈ (6), so TR − κ(Δl + x)R = (I/R)ẍ (7).

Solving (4) and (7) using (3): −κRx = (mR + I/R)ẍ, or ẍ = −[κ/(m + I/R2)]x. Hence the sought angular frequency and period are

ω0 = √[κ/(m + I/R2)], T = 2π/ω0 = 2π√[(m + I/R2)/κ].

(The problem may also be solved using conservation of mechanical energy.)

Teacher's Note: Pulley adds an effective mass I/R² to the block; the weight cancels against the initial spring stretch.

Exam Note: Effective mass is m + I/R²; ω0 = √(κ/that).

Question 55. A uniform cylindrical pulley of mass M and radius R can freely rotate about the horizontal axis O (Fig. 4.17). The free end of a thread tightly wound on the pulley carries a deadweight A. At a certain angle α it counterbalances a point mass m fixed at the rim of the pulley. Find the frequency of small oscillations of the arrangement. (α is the angle between the vertical through O and the radius to the point mass, which is on the side of the pulley opposite to the hanging weight.)

Solution.

At the equilibrium position the net torque about O is zero: mAgR − mgR sin α = 0, or mA = m sin α (1), where mA is the mass of the deadweight A.

From the equation of rotational dynamics about the fixed axis, Nz = Iβz: when the pulley is rotated by a small angular displacement θ in the clockwise sense relative to the equilibrium position,

mAgR − mgR sin(α + θ) = [MR2/2 + mR2 + mAR2]θ̈.

Using (1): mg sin α − mg(sin α cos θ + cos α sin θ) = {[M + 2m(1 + sin α)]R/2}θ̈. For small θ, cos θ ≈ 1 and sin θ ≈ θ, so

−mg cos α·θ = {[M + 2m(1 + sin α)]R/2}θ̈, hence θ̈ = −{2mg cos α/([M + 2m(1 + sin α)]R)}θ.

Hence the sought angular frequency

ω0 = √{2mg cos α/(R[M + 2m(1 + sin α)])}.

Teacher's Note: Moment of inertia includes the pulley, the rim mass and the hanging weight; the restoring torque is mgR cosα·θ.

Exam Note: Use mA = m sin α to simplify the inertia term.

Question 56. A solid uniform cylinder of radius r rolls without sliding along the inside surface of a cylinder of radius R, performing small oscillations. Find their period.

Solution.

Let the solid cylinder be displaced from its stable equilibrium position by a small angle θ during its oscillations. If vc is the instantaneous speed of its centre of mass C (pure rolling), its angular velocity about its own centre is ω = vc/r (1). Since C moves in a circle of radius (R − r), vc = θ̇(R − r) (2). Thus ω = θ̇(R − r)/r (3).

The mechanical energy is conserved: ½mvc2 + ½Icω2 + mg(R − r)(1 − cos θ) = constant, where Ic = mr2/2. Using (1) and (3):

(3/4)(R − r)2θ̇2 + g(R − r)(1 − cos θ) = constant.

Differentiating with respect to time: (3/4)(R − r)·2θ̇θ̈ + g sin θ θ̇ = 0, so θ̈ = −[2g/(3(R − r))]θ for small θ. Thus ω0 = √(2g/(3(R − r))) and the period is

T = 2π/ω0 = 2π√(3(R − r)/(2g)).

Teacher's Note: Rolling adds rotational energy: total KE = (3/4) m v²; centre moves on a circle of radius R−r.

Exam Note: Use R−r, not R, and I = mr²/2.

Question 57. A solid uniform cylinder of mass m performs small oscillations due to the action of two springs whose combined stiffness is equal to κ (Fig. 4.18). Find the period of these oscillations in the absence of sliding. (The cylinder rolls on a horizontal floor; each spring is attached to the topmost point of the cylinder and to a fixed wall on its side.)

Solution.

Let κ1 and κ2 be the spring constants of the left and right springs. As the cylinder rolls without sliding, its lowest point is the instantaneous centre of rotation. If θ is the small angular displacement of the cylinder, its uppermost point is displaced by 2Rθ, so the deformation of each spring is 2Rθ. Since the mechanical energy is conserved, E = T + U = constant, i.e.

½IPθ̇2 + ½κ1(2Rθ)2 + ½κ2(2Rθ)2 = constant.

Differentiating with respect to time: IPθ̈ + 4R2κθ = 0 (κ = κ1 + κ2), where IP = IC + mR2 = mR2/2 + mR2 = 3mR2/2. Hence

θ̈ = −(8κ/3m)θ, so ω0 = √(8κ/3m) and the period is

T = 2π/ω0 = 2π√(3m/8κ) = π√(3m/2κ).

Teacher's Note: Pure rolling: use the contact point as instantaneous axis, I = 3mR²/2; spring ends move 2Rθ.

Exam Note: Spring deformation is 2Rθ, not Rθ.

Question 58. Two cubes with masses m1 and m2 were interconnected by a weightless spring of stiffness κ and placed on a smooth horizontal surface. Then the cubes were drawn closer to each other and released simultaneously. Find the natural oscillation frequency of the system.

Solution.

In the centre-of-mass frame (rigidly attached to the centre of mass of the two cubes) the cubes oscillate. The kinetic energy of a two-body system equals ½μvrel2, where μ is the reduced mass and vrel is the speed of either body relative to the other. From conservation of mechanical energy of oscillation:

½κx2 + ½μ{d(l0 + x)/dt}2 = constant,

where l0 is the natural length of the spring and x the deformation. Differentiating with respect to time (d(l0 + x)/dt = ẋ): κxẋ + μẋẍ = 0, thus ẍ = −(κ/μ)x, where μ = m1m2/(m1 + m2). Hence the natural frequency of oscillation is

ω0 = √(κ/μ) = √(κ(m1 + m2)/(m1m2)).

Teacher's Note: In the centre-of-mass frame the pair acts as one body of reduced mass μ on the spring.

Exam Note: Quote ω = √(κ/μ) with μ = m1m2/(m1+m2).

Question 59. Two balls with masses m1 = 1.0 kg and m2 = 2.0 kg are slipped on a thin smooth horizontal rod (Fig. 4.19). The balls are interconnected by a light spring of stiffness κ = 24 N/m. The left-hand ball is imparted the initial velocity v1 = 12 cm/s. Find: (a) the oscillation frequency of the system in the process of motion; (b) the energy and the amplitude of oscillations.

Solution.

Suppose balls 1 and 2 are displaced by x1, x2 from their initial positions. Then the energy is

E = ½m1ẋ12 + ½m2ẋ22 + ½κ(x1 − x2)2 = ½m1v12,

and the total momentum is m1ẋ1 + m2ẋ2 = m1v1. Define X = (m1x1 + m2x2)/(m1 + m2) and x = x1 − x2. Then x1 = X + m2x/(m1 + m2), x2 = X − m1x/(m1 + m2), and

E = ½(m1 + m2)Ẋ2 + ½[m1m2/(m1 + m2)]ẋ2 + ½κx2.

Hence Ẋ = m1v1/(m1 + m2), so

½μẋ2 + ½κx2 = ½m1v12 − ½m12v12/(m1 + m2) = ½μv12.

(a) ω = √(κ/μ) = √(3 × 24/2) = 6 s−1, since μ = m1m2/(m1 + m2) = 2/3 kg.

(b) E = ½μv12 = ½ × (2/3) × (0.12)2 = 48 × 10−4 J = 4.8 mJ.

For the amplitude, x = a sin(ωt + α); initially x = 0 at t = 0, so α = 0, x = a sin ωt. Also ẋ = v1 at t = 0, so ωa = v1 and a = v1/ω = 12/6 = 2 cm.

Teacher's Note: Only relative motion oscillates: use reduced mass 2/3 kg; the centre-of-mass motion carries the rest of the energy.

Exam Note: Oscillation energy is ½μv₁² = 4.8 mJ, not ½m₁v₁².

Question 60. Find the period of small torsional oscillations of a system consisting of two discs slipped on a thin rod with torsional coefficient κ. The moments of inertia of the discs relative to the rod's axis are equal to I1 and I2.

Solution.

Suppose disc 1 rotates by angle θ1 and disc 2 by angle θ2 in the opposite sense. Then the total torsion of the rod is θ1 + θ2 and the torsional potential energy is ½κ(θ1 + θ2)2. The kinetic energy of the system (neglecting the moment of inertia of the rod) is ½I1θ̇12 + ½I2θ̇22. So the total energy is

E = ½I1θ̇12 + ½I2θ̇22 + ½κ(θ1 + θ2)2.

We can put the total angular momentum equal to zero, since the frequency associated with the rigid rotation of the whole system is zero. Thus I1θ̇1 = I2θ̇2, or θ̇1/(1/I1) = θ̇2/(1/I2) = (θ̇1 + θ̇2)/(1/I1 + 1/I2). So θ̇1 = [I2/(I1 + I2)](θ̇1 + θ̇2) and θ̇2 = [I1/(I1 + I2)](θ̇1 + θ̇2), and

E = ½[I1I2/(I1 + I2)](θ̇1 + θ̇2)2 + ½κ(θ1 + θ2)2.

The corresponding angular frequency is ω2 = κ/I′, and

T = 2π√(I′/κ), where I′ = I1I2/(I1 + I2).

Teacher's Note: Zero total angular momentum makes the two discs behave like one with reduced moment I1I2/(I1+I2).

Exam Note: Use the reduced moment of inertia, not the sum.

Question 61. A mock-up of a CO2 molecule consists of three balls interconnected by identical light springs and placed along a straight line in the state of equilibrium. Such a system can freely perform oscillations of two types, as shown by the arrows in Fig. 4.20. Knowing the masses of the atoms, find the ratio of frequencies of these oscillations. (Mode 1: the carbon atom stays at rest and the two oxygen atoms move in opposite directions symmetrically. Mode 2: the two oxygen atoms move together in one direction while the carbon atom moves the opposite way.)

Solution.

Mode 1. The carbon atom remains fixed and the oxygen atoms move in equal and opposite steps. Then the total energy is ½·2mOẋ2 + ½·2κx2, where x is the displacement of one of the O atoms. Thus ω12 = κ/mO.

Mode 2. The oxygen atoms move in equal steps in the same direction, but the carbon atom moves in such a way as to keep the centre of mass fixed. With x the displacement of each O atom and y that of the C atom (opposite direction): 2mOx + mCy = 0, i.e. y = −(2mO/mC)x.

K.E. = ½·2mOẋ2 + ½mC(2mO/mC)2ẋ2 = ½·2mO(1 + 2mO/mC)ẋ2.

P.E. = 2·½κ(1 + 2mO/mC)2x2 = ½·2κ(1 + 2mO/mC)2x2.

Thus ω22 = (κ/mO)(1 + 2mO/mC), and

ω2/ω1 = √(1 + 2mO/mC).

For CO2 (mO = 16, mC = 12): ω2 = ω1√(1 + 32/12) = ω1√(11/3) = 1.91 ω1.

Teacher's Note: Two normal modes: carbon fixed (ω² = κ/m_O) and centre-of-mass fixed (extra factor 1 + 2m_O/m_C).

Exam Note: Fix centre of mass in mode 2; use masses 16, 12.

Download IE Irodov Solutions for JEE Math PDF

Complete Math Solutions for IE Irodov Solutions Chapter 23 Mechanical Oscillations Part 2

Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 23 Mechanical Oscillations Part 2 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.