IE Irodov Solutions for JEE Physics: Chapter 21 Electromagnetic Induction Maxwells Equations
Access comprehensive textbook solutions for Chapter 21 Electromagnetic Induction Maxwells Equations using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice JEE Physics Solutions: Chapter 21 Electromagnetic Induction Maxwells Equations
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Electromagnetic Induction Maxwell’s Equations - Problems 288 to 343
Chapter 21 Electromagnetic Induction Maxwell’s Equations (Part 1)
Question 288. A wire bent as a parabola y = ax2 is located in a uniform magnetic field of induction B, the vector B being perpendicular to the plane x, y. At the moment t = 0 a connector starts sliding translation-wise from the parabola apex with a constant acceleration w (Fig. 3.78: the parabola opens upward along y, the field points into the plane, the connector moves up along +y). Find the emf of electromagnetic induction in the loop thus formed as a function of y.
Solution. By Lenz's law the induced current, and hence the induced emf in the loop, is anticlockwise. From Faraday's law, εin = |dΦ/dt|. Here dΦ = B·dS = 2Bx dy (magnitude), and from y = ax2, x = √(y/a). Hence εin = 2B√(y/a)·(dy/dt). Using dy/dt = √(2wy) (constant acceleration from rest), εin = 2B y√(2w/a) = By√(8w/a).
Teacher's Note: Chord length at height y is 2x = 2√(y/a); flux grows as the connector rises, so use dy/dt = √(2wy).
Exam Note: Show dΦ = 2Bx dy, substitute x and dy/dt; final By√(8w/a).
Question 289. A rectangular loop with a sliding connector of length l is located in a uniform magnetic field perpendicular to the loop plane (Fig. 3.79). The magnetic induction is equal to B. The connector has an electric resistance R, the sides AB and CD have resistances R1 and R2 respectively. Neglecting the self-inductance of the loop, find the current flowing in the connector during its motion with a constant velocity v. (Figure: the connector of resistance R moves to the right between the two vertical sides AB, with resistance R1, and CD, with resistance R2.)
Solution. Let B be directed into the plane of the loop. The motional emf is εin = |∫ (v×B)·dl| = vBl, directed along (v×B). The sides R1 and R2 are in parallel, so their combined resistance is R1R2/(R1+R2). Hence the current in the connector is i = εin / [R + R1R2/(R1+R2)] = Bvl(R1+R2) / [R(R1+R2) + R1R2]. (Corrected: the printed final expression, Bvl/(R+Ru), is garbled; the full expression is given here.)
Teacher's Note: The moving rod is the source; the two side resistors act in parallel as its load.
Exam Note: Identify parallel combination; write full denominator R + R1R2/(R1+R2).
Question 290. A metal disc of radius a = 25 cm rotates with a constant angular velocity ω = 130 rad/s about its axis. Find the potential difference between the centre and the rim of the disc if
(a) the external magnetic field is absent;
(b) the external uniform magnetic field of induction B = 5.0 mT is directed perpendicular to the disc.
Solution. (a) As the disc rotates, every free electron moves in a circle with the same angular velocity ω, so it needs a centripetal acceleration ω2r directed towards the centre. With no magnetic field, this net force can only come from an electric field, directed opposite to the acceleration of the electron. From Newton's second law, eE = mω2r, so E = mω2r/e. The potential difference is φcen − φrim = ∫0a E·dr = ∫0a (mω2r/e) dr = mω2a2/(2e) = 3.0 nV.
(b) With the field present, by the definition of motional emf, φ1 − φ2 = ∫12 (v×B)·dr. Hence φcen − φrim = −∫0a vB dr = −∫0a ωrB dr, so φrim − φcen = ½ωBa2 = 20 mV. (In general ω < eB/m, so the effect discussed in (a) can be neglected in (b).)
Teacher's Note: Part (a) is a pure electron-inertia effect; part (b) is motional emf of a rotating radius, ½ωBa2.
Exam Note: Give both numbers: 3.0 nV and 20 mV.
Question 291. A thin wire AC shaped as a semi-circle of diameter d = 20 cm rotates with a constant angular velocity ω = 100 rad/s in a uniform magnetic field of induction B = 5.0 mT, with ω ↑↑ B. The rotation axis passes through the end A of the wire and is perpendicular to the diameter AC. Find the value of the line integral ∫E·dr along the wire from point A to point C. Generalize the obtained result.
Solution. By definition, E = −(v×B) in the rotating wire, so ∫AC E·dr = −∫AC (v×B)·dr. Here v = ωr, where r is the perpendicular distance of the point from the axis through A, and the effective integral runs over the distance d from A to C: ∫AC E·dr = −∫0d ωBr dr = −½ωBd2 = −10 mV.
Generalization: for a wire AC of arbitrary planar shape, ∫AC E·dr = −∫ ((ω×r)×B)·dr = −∫ (B·r ω − B·ω r)·dr = −½Bωd2, where d is the straight-line distance AC and r is measured from A. The result depends only on the end points, not on the shape of the wire.
Teacher's Note: With ω ∥ B, the result depends only on the chord AC, not on the wire's shape.
Exam Note: Quote −10 mV and the shape-independent general result −½Bωd2.
Question 292. A wire loop enclosing a semi-circle of radius a is located on the boundary of a uniform magnetic field of induction B (Fig. 3.80). At the moment t = 0 the loop is set into rotation with a constant angular acceleration β about an axis O coinciding with a line of vector B on the boundary. Find the emf induced in the loop as a function of time t. Draw the approximate plot of this function. The arrow in the figure shows the emf direction taken to be positive.
Solution. The flux at any moment is |Φ| = B·(½a2φ), where φ is the angle of the sector enclosed by the field. The magnitude of the induced emf is εin = |dΦ/dt| = (Ba2/2)(dφ/dt) = (Ba2/2)ω. The loop starts from rest at t = 0 with angular acceleration β, so ω = βt and εin = ½Ba2βt. By Lenz's law, during the first half revolution the current is anticlockwise and in the next half revolution it is clockwise, so in general εin = (−1)n·½Ba2βt, where n is the number of half revolutions completed. The sign changes at tn = √(2πn/β). Plot: a saw-tooth made of straight line segments through the origin with slope ½Ba2β, which flips sign after each half revolution at tn = √(2πn/β), so the teeth become narrower with time while their height grows. (The book gives this plot in its answer sheet; it is described here in words.)
Teacher's Note: Flux changes only through the sector inside the field; ω = βt, and the emf reverses each half turn.
Exam Note: Give ε = ½Ba2βt, the sign flip times and the sketch.
Question 293. A long straight wire carrying a current I and a Π-shaped conductor with sliding connector are located in the same plane as shown in Fig. 3.81. The connector of length l and resistance R slides to the right with a constant velocity v. Find the current induced in the loop as a function of separation r between the connector and the straight wire. The resistance of the Π-shaped conductor and the self-inductance of the loop are assumed to be negligible.
Solution. The field of the current-carrying wire to the right of it is directed into the plane of the paper, with magnitude B = μ0I/(2πr), where r is the perpendicular distance from the wire. As B is the same along the whole length of the connector, the motional emf is εin = |∫ (v×B)·dl| = vBl, directed along (v×B). So the induced current in the loop is iin = εin/R = μ0Ivl/(2πRr).
Teacher's Note: Connector is perpendicular to the wire, so B is uniform along it at distance r.
Exam Note: Write B = μ0I/(2πr) first, then ε = vBl.
Question 294. A square frame with side a and a long straight wire carrying a current I are located in the same plane as shown in Fig. 3.82. The frame translates to the right with a constant velocity v. Find the emf induced in the frame as a function of distance x. (Figure: the frame's nearer side is at distance x from the wire.)
Solution. The field of the current-carrying wire at a perpendicular distance x is B(x) = μ0I/(2πx). The motional emf is |∫ (v×B)·dl|. There is no induced emf in the sides parallel to v (segments 2 and 4), since v ∥ dl there. The emfs induced in the sides 1 and 3 are ε1 = v(μ0I/(2πx))a and ε2 = v(μ0I/(2π(a+x)))a, which act in opposite senses around the loop. Since ε1 > ε2, the emf induced in the frame is ε1 − ε2 = (avμ0I/(2π))[1/x − 1/(a+x)] = μ0Iva2/(2πx(x+a)).
Teacher's Note: Only the two sides perpendicular to the velocity, at x and x+a, contribute; subtract their emfs.
Exam Note: Subtract the two side emfs; a2 in numerator.
Question 295. A metal rod of mass m can rotate about a horizontal axis O, sliding along a circular conductor of radius a (Fig. 3.83). The arrangement is located in a uniform magnetic field of induction B directed perpendicular to the ring plane. The axis and the ring are connected to an emf source to form a circuit of resistance R. Neglecting the friction, circuit inductance, and ring resistance, find the law according to which the source emf must vary to make the rod rotate with a constant angular velocity ω.
Solution. As the rod rotates, an emf (d/dt)(½a2θB) = ½a2Bω is induced in it. The net current in the circuit is then i = (ε(t) − ½a2Bω)/R. The magnetic force on the rod is BI per unit length, normal to B and to the rod, so its torque about O is ∫0a i B x dx = iBa2/2. For uniform rotation this torque must balance the torque of gravity about O, which is ½mga sin ωt. So [(ε(t) − ½a2Bω)/R]·(Ba2/2) = ½mga sin ωt, giving ε(t) = ½a2Bω + (mgR/(aB)) sin ωt = (1/(2aB))(a3B2ω + 2mgR sin ωt).
Teacher's Note: Balance magnetic torque iBa2/2 against gravity torque ½mga sin ωt; add back the back-emf.
Exam Note: Two terms: back-emf ½Ba2ω plus the term driving the current.
Question 296. A copper connector of mass m slides down two smooth copper bars, set at an angle α to the horizontal, due to gravity (Fig. 3.84). At the top the bars are interconnected through a resistance R. The separation between the bars is equal to l. The system is located in a uniform magnetic field of induction B, perpendicular to the plane in which the connector slides. The resistances of the bars, the connector and the sliding contacts, as well as the self-inductance of the loop, are assumed to be negligible. Find the steady-state velocity of the connector.
Solution. From Lenz's law the current through the connector is directed from A to B, and the emf between A and B is εin = vBl, where v is the velocity of the rod at any moment. From Newton's second law along the incline, mg sin α − ilB = mw. In the steady state the acceleration is zero, so mg sin α = ilB (1). But i = εin/R = vBl/R (2). From (1) and (2), v = mgR sin α/(B2l2).
Teacher's Note: Steady state means acceleration zero: gravity component along incline equals Ampere force.
Exam Note: Equate mg sin α to B2l2v/R; answer with R in numerator.
Question 297. The system differs from the one examined in the foregoing problem (Fig. 3.84) by a capacitor of capacitance C replacing the resistance R. Find the acceleration of the connector.
Solution. From Lenz's law the induced current in the circuit is clockwise. The potential difference across the capacitor equals the induced emf, q/C = εin, so q = Cεin and the current is i = dq/dt = C dεin/dt. Since εin = Blv, dεin/dt = Blw, so i = CBlw. The Ampere force is Famp = ilB = CB2l2w. From Newton's second law, mg sin α − CB2l2w = mw, hence w = mg sin α/(m + CB2l2) = g sin α/(1 + B2l2C/m).
Teacher's Note: The capacitor current is proportional to acceleration, so the Ampere force acts like extra mass CB2l2.
Exam Note: Acceleration is constant; effective mass m + CB2l2 is the key step.
Question 298. A wire shaped as a semi-circle of radius a rotates about an axis OO′ with an angular velocity ω in a uniform magnetic field of induction B (Fig. 3.85). The rotation axis is perpendicular to the field direction. The total resistance of the circuit is equal to R. Neglecting the magnetic field of the induced current, find the mean amount of thermal power being generated in the loop during a rotation period.
Solution. The flux of B at time t is Φ = B·S = B(πa2/2) cos ωt. From Faraday's law, εin = −dΦ/dt = (Bπa2ω/2) sin ωt, and the induced current is iin = εin/R = (Bπa2ω/(2R)) sin ωt. The thermal power at time t is P(t) = εiniin = (Bπa2ω/2)2(1/R) sin2ωt. The mean power over a period is ⟨P⟩ = (1/T)∫0T P dt = (1/(2R))(πωa2B/2)2 = π2ω2a4B2/(8R). (The calculation of εin can also be checked using motional emf: it is correct even though the conductor is not a closed semicircle, since the flux linked to the rectangular part containing R does not change. The answer printed in the book differs by a factor 1/4; the value above has been rechecked.)
Teacher's Note: Flux through a semicircle is (πa2/2)B cos ωt; average of sin2 over a period is ½.
Exam Note: Use mean of sin2 = ½; amplitude emf is Bπa2ω/2.
Question 299. A small coil is introduced between the poles of an electromagnet so that its axis coincides with the magnetic field direction. The cross-sectional area of the coil is equal to S = 3.0 mm2, the number of turns is N = 60. When the coil turns through 180° about its diameter, a ballistic galvanometer connected to the coil indicates a charge q = 4.5 μC flowing through it. Find the magnetic induction magnitude between the poles provided the total resistance of the electric circuit equals R = 40 Ω.
Solution. The flux through the coil changes sign: initially it is BS per turn, finally −BS per turn. If Φ is the flux at an intermediate state, the current at that moment is i = −N(dΦ/dt)/R. So the charge that flows during the sudden turning of the coil is q = ∫i dt = −(N/R)[Φ − (−Φ)] with magnitude 2NBS/R. Hence B = qR/(2NS) = (4.5×10−6 × 40)/(2 × 60 × 3.0×10−6) = 0.5 T.
Teacher's Note: Charge depends only on total flux change 2NBS and resistance, not on how fast the coil turns.
Exam Note: Write q = NΔΦ/R with ΔΦ = 2BS; answer 0.5 T.
Question 300. A square wire frame with side a and a straight conductor carrying a constant current I are located in the same plane (Fig. 3.86). The inductance and the resistance of the frame are equal to L and R respectively. The frame was turned through 180° about the axis OO′ separated from the current-carrying conductor by a distance b. Find the electric charge having flown through the frame. (Figure: the frame lies between distances b − a and b from the wire, and OO′ is its side at distance b; after the turn the frame lies between b and b + a.)
Solution. According to Ohm's law and Faraday's law, the current i0 in the frame during its rotation is determined by i0R = −dΦ/dt − L di0/dt. Hence the required charge is q = ∫i0dt = −(1/R)∫(dΦ + L di0) = −(1/R)(ΔΦ + LΔi0). Since the frame is at rest before and after the rotation, the current vanishes at both ends, so Δi0 = 0, and it remains to find the increment of flux ΔΦ = Φ2 − Φ1. Choose the normal n so that in the final position it points along B. Then Φ2 > 0 while in the initial position Φ1 < 0 (the normal is opposite to B), and ΔΦ is simply the flux through the surface bounded by the final and initial positions of the frame: ΔΦ = Φ2 + |Φ1| = ∫b−ab+a B a dr, with B = μ0I/(2πr) from the circulation theorem. Omitting the sign, q = ΔΦ/R = (μ0Ia/(2πR)) ln((b+a)/(b−a)).
Teacher's Note: Inductance drops out because current is zero at start and end; field direction reverses across the wire side.
Exam Note: L drops out; ΔΦ spans b−a to b+a.
Question 301. A long straight wire carries a current I0. At distances a and b from it there are two other wires, parallel to the former one, which are interconnected by a resistance R (Fig. 3.87). A connector slides without friction along the wires with a constant velocity v. Assuming the resistances of the wires, the connector, the sliding contacts, and the self-inductance of the frame to be negligible, find:
(a) the magnitude and the direction of the current induced in the connector;
(b) the force required to maintain the connector's velocity constant.
Solution. As B due to the straight current-carrying wire varies along the connector, take its average value over [a, b]: ⟨B⟩ = ∫abB dr/∫abdr = (μ0I0/(2π(b−a))) ln(b/a).
(a) The flux through the loop changes due to the movement of the connector. By Lenz's law the current in the loop is anticlockwise. The magnitude of the motional emf is εin = v⟨B⟩(b−a) = (μ0I0v/(2π)) ln(b/a). So the induced current is iin = εin/R = (μ0I0v/(2πR)) ln(b/a).
(b) The force required to maintain constant velocity equals in magnitude the Ampere force on the connector, in the opposite direction: Fext = iinl⟨B⟩ = (v/R)((μ0I0/(2π)) ln(b/a))2, directed along the velocity as shown in the figure.
Teacher's Note: Averaging B over the rod gives ε = ∫vB dr exactly; external force just cancels the Ampere force.
Exam Note: Both answers contain ln(b/a); F is proportional to v and I02.
Question 302. A conducting rod AB of mass m slides without friction over two long conducting rails separated by a distance l (Fig. 3.88). At the left end the rails are interconnected by a resistance R. The system is located in a uniform magnetic field perpendicular to the plane of the loop. At the moment t = 0 the rod AB starts moving to the right with an initial velocity v0. Neglecting the resistances of the rails and the rod AB, as well as the self-inductance, find:
(a) the distance covered by the rod until it comes to a standstill;
(b) the amount of heat generated in the resistance R during this process.
Solution. (a) The flux through the loop changes due to the movement of the rod AB. By Lenz's law the current is anticlockwise for B directed into the plane of the loop. The motional emf is εin(t) = Blv and the induced current is iin = vBl/R. The Ampere force opposes the motion: Famp = iinlB = vB2l2/R. From Newton's law, −Famp = m v dv/dx, so −vB2l2/R = mv dv/dx. Integrating, ∫0x dx = −(mR/(B2l2))∫v00 dv, so x = mRv0/(B2l2).
(b) From energy conservation, the change in kinetic energy plus the heat liberated is zero: (0 − ½mv02) + heat = 0. So the heat liberated is ½mv02.
Teacher's Note: Write m v dv/dx so the force depends on v and x integrates directly; all kinetic energy becomes heat.
Exam Note: Part (a) uses v dv/dx; part (b) needs no integration.
Question 303. A connector AB can slide without friction along a Π-shaped conductor located in a horizontal plane (Fig. 3.89). The connector has a length l, mass m, and resistance R. The whole system is located in a uniform magnetic field of induction B directed vertically. At the moment t = 0 a constant horizontal force F starts acting on the connector shifting it translation-wise to the right. Find how the velocity of the connector varies with time t. The inductance of the loop and the resistance of the Π-shaped conductor are assumed to be negligible.
Solution. From the previous problem, the Ampere force on the connector is Famp = vB2l2/R, directed to the left. From Newton's second law, F − Famp = m dv/dt, so F = vB2l2/R + m dv/dt. Then ∫0t dt = m∫0v dv/(F − vB2l2/R), giving t/m = −(R/(B2l2)) ln[(F − vB2l2/R)/F]. Thus v = (RF/(B2l2))(1 − e−tB2l2/(Rm)).
Teacher's Note: Magnetic drag grows with v, so velocity rises exponentially to the terminal value RF/(B2l2).
Exam Note: State the terminal velocity and the time constant mR/(B2l2).
Question 304. Fig. 3.90 illustrates plane figures made of thin conductors which are located in a uniform magnetic field directed away from a reader beyond the plane of the drawing. The magnetic induction starts diminishing. Find how the currents induced in these loops are directed. (Figure: (a) a circular ring with a straight diameter connector; (b) a thin ring open at a gap, joined to a smaller concentric ring so that the wire forms a spiral of two turns; (c) two concentric circular rings joined by a short radial connector; (d) a figure-of-eight loop, a large loop on the left and a small loop on the right, with the wire crossing at the middle.)
Solution. According to Lenz's law, the sense of the induced emf is such that it opposes the cause of the change of flux. Here the field is directed away from the reader and is diminishing, so the induced current tends to maintain the field and is clockwise in each closed loop.
(a) In the round conductor the current is clockwise and there is no current in the connector.
(b) In the outside conductor the current is clockwise (the inner turn, being traversed the other way round as the wire returns, carries it anticlockwise).
(c) In both the conductors the current is clockwise; there is no current in the connector, to obey conservation of charge.
(d) In the left side of the figure the current is clockwise (and, since the wire crosses at the middle, anticlockwise in the right loop).
Teacher's Note: Lenz: the flux into the page decreases, so induced current is clockwise to restore it.
Exam Note: Give the sense in every loop and say the connector carries none.
Question 305. A plane loop shown in Fig. 3.91 is shaped as two squares with sides a = 20 cm and b = 10 cm and is introduced into a uniform magnetic field at right angles to the loop's plane. The magnetic induction varies with time as B = B0 sin ωt, where B0 = 10 mT and ω = 100 s−1. Find the amplitude of the current induced in the loop if its resistance per unit length is equal to ρ = 50 mΩ/m. The inductance of the loop is to be neglected. (Figure: two squares touching at a corner, the wire crossing at the junction.)
Solution. The loops are connected in such a way that if the current is clockwise in one, it is anticlockwise in the other. Hence the emf in loop b opposes the emf in loop a. The emf in loop a is d(a2B)/dt = a2B0ω cos ωt, and similarly the emf in loop b is b2B0ω cos ωt. Hence the net emf in the circuit is (a2 − b2)B0ω cos ωt, as the two emfs are in opposite sense, and the resistance of the circuit is 4(a + b)ρ. Therefore the amplitude of the current is Im = (a2 − b2)B0ω/(4(a + b)ρ) = (a − b)B0ω/(4ρ) = 0.5 A.
Teacher's Note: Figure-eight crossing makes the two emfs oppose; wire length is 4(a+b).
Exam Note: Subtract the emfs; resistance uses total perimeter 4(a+b).
Question 306. A plane spiral with a great number N of turns wound tightly to one another is located in a uniform magnetic field perpendicular to the spiral's plane. The outside radius of the spiral's turns is equal to a. The magnetic induction varies with time as B = B0 sin ωt, where B0 and ω are constants. Find the amplitude of emf induced in the spiral.
Solution. The flat shape is made up of concentric loops with radii varying from 0 to a. For an elementary loop of radius r, the induced emf is −d(B·S)/dt = πr2B0ω cos ωt. The total induced emf is εind = ∫0a (πr2B0ω cos ωt) dN (1), where πr2ω cos ωt is the contribution of one turn of radius r and dN is the number of turns in the interval [r, r + dr]. So dN = (N/a) dr (2). From (1) and (2), ε = ∫0a (πr2B0ω cos ωt)(N/a) dr = πB0ωN a2 cos ωt/3. The amplitude is εmax = (1/3)πB0ωNa2.
Teacher's Note: Turns are spread uniformly in radius, dN = (N/a)dr; integrate r2, giving the factor 1/3.
Exam Note: Integral of r2 gives a3/3; amplitude is πB0ωNa2/3.
Question 307. A H-shaped conductor is located in a uniform magnetic field perpendicular to the plane of the conductor and varying with time at the rate Ḃ = 0.10 T/s. A conducting connector starts moving with an acceleration w = 10 cm/s2 along the parallel bars of the conductor. The length of the connector is equal to l = 20 cm. Find the emf induced in the loop t = 2.0 s after the beginning of the motion, if at the moment t = 0 the loop area and the magnetic induction are equal to zero. The inductance of the loop is to be neglected.
Solution. The flux through the loop changes due to the variation of B with time and also due to the movement of the connector. So εin = |d(B·S)/dt| = |d(BS)/dt|, as S and B are collinear. After t seconds from the beginning of the motion, B = Ḃt, and the area becomes S = l·½wt2, as the connector starts from rest with constant acceleration w. So BS = ½Ḃlwt3 and εind = (3/2)Ḃlwt2. Numerically, ε = 1.5 × 0.10 × 0.20 × 0.10 × (2.0)2 = 12 mV. (The printed solution stops at the formula; the numerical value has been added.)
Teacher's Note: Both B and area grow with time, so differentiate the product BS, not each factor alone.
Exam Note: BS ∝ t3, so the emf ∝ t2; substitute numbers.
Question 308. In a long straight solenoid with cross-sectional radius a and number of turns per unit length n a current varies with a constant velocity İ A/s. Find the magnitude of the eddy current field strength as a function of the distance r from the solenoid axis. Draw the approximate plot of this function.
Solution. We use B = μ0nI. From the law of electromagnetic induction, ∮E·dl = −dΦ/dt. For r < a: Eφ·2πr = −πr2μ0nİ, so Eφ = −½μ0nrİ (where İ = dI/dt). For r > a: Eφ·2πr = −πa2μ0nİ, so Eφ = −μ0nİa2/(2r). The meaning of the minus sign can be deduced from Lenz's law. Plot of |E|: a straight line rising from zero at r = 0 to the maximum ½μ0nİa at r = a, then falling as a hyperbola 1/r for r > a.
Teacher's Note: Inside, flux enclosed grows as r2, so E ∝ r; outside, flux stays fixed, so E ∝ 1/r.
Exam Note: Give both regions and the peak ½μ0nİa at r = a.
Question 309. A long straight solenoid of cross-sectional diameter d = 5 cm and with n = 20 turns per one cm of its length has a round turn of copper wire of cross-sectional area S = 1.0 mm2 tightly put on its winding. Find the current flowing in the turn if the current in the solenoid winding is increased with a constant velocity İ = 100 A/s. The inductance of the turn is to be neglected.
Solution. The emf induced in the turn is ε = μ0nİπd2/4. The resistance of the turn is R = (πd/S)ρ, where ρ is the resistivity of copper. So the current is I = ε/R = μ0nİSd/(4ρ). Corrected: with n = 2000 m−1, S = 1.0×10−6 m2, d = 0.05 m, ρ = 1.7×10−8 Ω·m, I = (4π×10−7 × 2000 × 100 × 10−6 × 0.05)/(4 × 1.7×10−8) ≈ 0.19 A, i.e. about 0.2 A (the book's printed value of 2 mA is wrong).
Teacher's Note: The turn length πd and its resistance πdρ/S depend on the wire; the emf depends on the solenoid flux.
Exam Note: Convert 20 turns/cm to 2000 per m; answer about 0.2 A.
Question 331. Two thin concentric wires shaped as circles with radii a and b lie in the same plane. Allowing for a ≪ b, find:
(a) their mutual inductance;
(b) the magnetic flux through the surface enclosed by the outside wire, when the inside wire carries a current I.
Solution. The direct calculation of the flux Φ2 through the large loop is rather complicated, since the field configuration is complicated. The reciprocity theorem simplifies the solution. Let the same current i flow through loop 2 (the outside loop). The magnetic flux created by this current through loop 1 (the small loop) is easily found: the induction at the centre is B = μ0i/(2b), so Φ12 = πa2·μ0i/(2b). From the reciprocity theorem, Φ12 = Φ21 = μ0πa2i/(2b).
(a) L12 = Φ21/i = μ0πa2/(2b).
(b) With the current I in the inside wire, the flux through the outside wire is Φ = L12I = μ0πa2I/(2b).
Teacher's Note: Reciprocity: M is the same either way, so find the easy flux (large ring's field at the small ring's centre).
Exam Note: Treat the small loop's area as uniform field; state M = μ0πa2/(2b).
Question 332. A small cylindrical magnet M (Fig. 3.95) is placed in the centre of a thin coil of radius a consisting of N turns. The coil is connected to a ballistic galvanometer. The active resistance of the whole circuit is equal to R. Find the magnetic moment of the magnet if its removal from the coil results in a charge q flowing through the galvanometer.
Solution. Let pm be the magnetic moment of the magnet M. The field of the magnet is B = (μ0/4π)[3(pm·r)r/r5 − pm/r3]. The flux through the coil when the magnet lies on the axis at a distance x from the centre is Φ = Φ1 − Φ2, where Φ2 = (μ0pm/4π)∫0a 2πρ dρ/(x2+ρ2)3/2 = (μ0pm/2)(1/x − 1/√(x2+a2)) and Φ1 = (3μ0pmx2/4π)∫0a 2πρ dρ/(x2+ρ2)5/2 = (μ0pmx2/2)(1/x3 − 1/(x2+a2)3/2). So Φ = −μ0pma2/(2(x2+a2)3/2). When the flux changes, an emf −N dΦ/dt is induced and a current −N(dΦ/dt)/R flows. The total charge q flowing as the magnet is removed to infinity from x = 0 is q = (N/R)Φ(x = 0) = (N/R)·μ0pm/(2a) in magnitude. Or, pm = 2aqR/(Nμ0).
Teacher's Note: Charge depends only on total flux change; at the centre the flux is μ0pm/(2a), and at infinity it is zero.
Exam Note: Use q = NΔΦ/R with ΔΦ = μ0pm/(2a).
Question 333. Find the approximate formula expressing the mutual inductance of two thin coaxial loops of the same radius a if their centres are separated by a distance l, with l ≫ a.
Solution. If a current I flows in one of the coils, the magnetic field at the centre of the other coil is B = μ0a2I/(2(l2+a2)3/2) ≈ μ0a2I/(2l3), as l ≫ a. The flux associated with the second coil is then approximately πa2B = μ0πa4I/(2l3). Hence L12 = μ0πa4/(2l3).
Teacher's Note: For l ≫ a, the second loop sees the first loop's on-axis field as uniform over its small area.
Exam Note: Use binomial approximation (l2+a2)3/2 ≈ l3.
Question 334. There are two stationary loops with mutual inductance L12. The current in one of the loops starts to be varied as I1 = αt, where α is a constant, t is time. Find the time dependence I2(t) of the current in the other loop whose inductance is L2 and resistance R.
Solution. When the current in one of the loops is I1 = αt, an emf L12dI1/dt = L12α is induced in the other loop. Then if the current in the other loop is I2, we must have L2dI2/dt + RI2 = L12α. This familiar equation has the solution I2 = (L12α/R)(1 − e−Rt/L2), which is the required current. (Corrected: the printed exponent is garbled; it is −Rt/L2.)
Teacher's Note: Second loop obeys an L-R equation driven by constant emf L12α, so it rises exponentially.
Exam Note: State the final value L12α/R and the time constant L2/R.
Question 335. A coil of inductance L = 2.0 μH and resistance R = 1.0 Ω is connected to a source of constant emf ℰ = 3.0 V (Fig. 3.96). A resistance R0 = 2.0 Ω is connected in parallel with the coil. Find the amount of heat generated in the coil after the switch Sw is disconnected. The internal resistance of the source is negligible. (Figure: the coil L, R and the resistor R0 are in parallel across the source ℰ in series with the switch Sw.)
Solution. Initially, after a steady current is set up, the currents are i20 = ℰ/R in the coil and i10 = ℰ/R0 in R0. When the switch is disconnected, the current through R0 changes from i10 to the right to i20 to the left. (The current in the inductance cannot change suddenly.) We then have L di2/dt + (R + R0)i2 = 0, with solution i2 = i20e−t(R+R0)/L. The heat dissipated in the coil is Q = ∫0∞ i22R dt = i202R ∫0∞ e−2t(R+R0)/L dt = Ri202·L/(2(R+R0)) = Lℰ2/(2R(R+R0)) = 3 μJ.
Teacher's Note: Coil current is continuous at switch-off; the whole stored energy splits between R and R0 in ratio of resistances.
Exam Note: Heat in coil is the fraction R/(R+R0) of ½Li202.
Question 336. An iron tore supports N = 500 turns. Find the magnetic field energy if a current I = 2.0 A produces a magnetic flux across the tore's cross-section equal to Φ = 1.0 mWb.
Solution. To find the magnetic field energy, recall that the flux varies linearly with current: when the flux is Φ for current i, we can write Φ = Ai. The total energy enclosed in the field when the current is I is W = ∫ε i dt = ∫N(dΦ/dt) i dt = ∫NdΦ i = ∫0I NAi di = ½NAI2 = ½NΦI. Numerically, W = ½ × 500 × 1.0×10−3 × 2.0 = 0.5 J. (The printed solution gives the formula only; the number has been added.)
Teacher's Note: The factor ½ arises because flux and current build up together from zero.
Exam Note: Use W = ½NΦI; do not forget the ½.
Question 337. An iron core shaped as a doughnut with round cross-section of radius a = 3.0 cm carries a winding of N = 1000 turns through which a current I = 1.0 A flows. The mean radius of the doughnut is b = 32 cm. Using the plot in Fig. 3.76, find the magnetic energy stored up in the core. A field strength H is supposed to be the same throughout the cross-section and equal to its magnitude in the centre of the cross-section. (Fig. 3.76 is the basic magnetization curve of commercial-purity iron: B rises steeply to about 1.0 T at H ≈ 0.1 kA/m, then flattens, reaching about 1.4 T near H = 0.5 kA/m.)
Solution. We apply the circulation theorem: H·2πb = NI, or H = NI/(2πb). Thus the total energy is W = ½BH·2πb·πa2 = π2a2bBH. Given N, I, b we know H and can find B from the B–H curve; then W can be calculated. Here H = 1000 × 1.0/(2π × 0.32) ≈ 0.50 kA/m, for which the curve gives B ≈ 1.4 T, so W ≈ π2 × (0.03)2 × 0.32 × 1.4 × 497 ≈ 2 J. (The printed solution does not work out the number; this value depends on reading the graph and is approximate.)
Teacher's Note: Field energy density ½BH times core volume 2πb·πa2; B must come from the curve, not B = μ0H.
Exam Note: Compute H first, read B off the curve, then W = π2a2bBH.
Question 338. A thin ring made of a magnetic has a mean diameter d = 30 cm and supports a winding of N = 800 turns. The cross-sectional area of the ring is equal to S = 5.0 cm2. The ring has a cross-cut of width b = 2.0 mm. When the winding carries a certain current, the permeability of the magnetic equals μ = 1400. Neglecting the dissipation of magnetic flux at the gap edges, find:
(a) the ratio of magnetic energies in the gap and in the magnetic;
(b) the inductance of the system; do it in two ways: using the flux and using the energy of the field.
Solution. From ∮H·dr = NI: H·πd + (B/μ0)·b = NI (d ≫ b), with B = μμ0H, so H = NI/(πd + μb). Since B is continuous across the gap, B = μμ0NI/(πd + μb) both in the magnetic and in the gap.
(a) Wgap/Wmagnetic = (B2/(2μ0))Sb / ((B2/(2μμ0))Sπd) = μb/(πd) ≈ 3.0 (= 1400 × 2.0 mm/(π × 30 cm) = 2.97).
(b) By flux: Φ_total = N∫B·dS = Nμμ0(NI/(πd+μb))S = μ0SN2I/(b + πd/μ), so L = μ0SN2/(b + πd/μ).
By energy: the total energy is (B2/(2μ0))(πd/μ + b)S = ½(μ0N2S/(b + πd/μ))I2 = ½LI2, giving the same L. Numerically, L ≈ 0.15 H (value added; the printed solution stops at the formula). The L found in one way agrees with that found in the other. Note that in calculating the flux we do not consider the field in the gap, since it is not linked to the winding, but the total energy includes that of the gap.
Teacher's Note: Gap and ring carry the same B, so energies compare as length/μ: gap length b against πd/μ.
Exam Note: Do L twice: flux linkage and ½LI2; both give μ0SN2/(b+πd/μ).
Question 339. A long cylinder of radius a carrying a uniform surface charge rotates about its axis with an angular velocity ω. Find the magnetic field energy per unit length of the cylinder if the linear charge density equals λ, and μ = 1.
Solution. When the cylinder with a linear charge density λ rotates with angular frequency ω, a surface current density (charge/length × time) i = λω/(2π) is set up. The direction of the surface current is normal to the plane of the paper at Q, and its contribution to the magnetic field at an axial point P is dB = (μ0/4π)·i(e×r)/r3 dS, where e is the direction of the current; in magnitude |e×r| = r, since e is normal to r. The component dB∥ cancels out by cylindrical symmetry. The component that survives is |B⊥| = (μ0/4π)∫(i dS/r2) cos θ = (μ0i/4π)∫dΩ = μ0i, where we have used dS cos θ/r2 = dΩ and ∫dΩ = 4π, the total solid angle around any point. The magnetic field vanishes outside the cylinder by a similar argument. The total energy per unit length of the cylinder is W1 = (1/(2μ0))μ02(λω/(2π))2 × πa2 = μ0a2λ2ω2/(8π).
Teacher's Note: The rotating charged cylinder is a solenoid: B = μ0i inside, zero outside; energy = (B2/2μ0) × area.
Exam Note: Surface current is λω/2π; multiply energy density by πa2.
Question 340. At what magnitude of the electric field strength in vacuum the volume energy density of this field is the same as that of the magnetic field with induction B = 1.0 T (also in vacuum).
Solution. The energy density of the electric field is wE = ½ε0E2 and of the magnetic field wB = B2/(2μ0). Equating, B2/(2μ0) = ½ε0E2, so E = B/√(ε0μ0) = Bc = 3×108 V/m for B = 1.0 T.
Teacher's Note: Equal energy densities give E = cB, the same ratio as in an electromagnetic wave.
Exam Note: Quote E = B/√(ε0μ0) = 3×108 V/m.
Question 341. A thin uniformly charged ring of radius a = 10 cm rotates about its axis with an angular velocity ω = 100 rad/s. Find the ratio of volume energy densities of magnetic and electric fields on the axis of the ring at a point removed from its centre by a distance l = a.
Solution. The electric field at P on the axis is EP = ql/(4πε0(a2+l2)3/2). To get the magnetic field, note that the rotating ring constitutes a current i = qω/(2π), and the corresponding magnetic field at P is BP = μ0a2i/(2(a2+l2)3/2). Thus wE/wM = ε0μ0E2/B2 = ε0μ0(ql × 2/(4πε0μ0a2i))2 = (1/(ε0μ0))(l/(a2ω))2, or wM/wE = ε0μ0ω2a4/l2. For l = a this becomes (ωa/c)2 = (10 m/s / 3×108 m/s)2 ≈ 1.1×10−15 (value added; the printed solution stops at the formula).
Teacher's Note: Both fields share the same (a2+l2)3/2 factor, so only the ratio B/E matters.
Exam Note: Ratio is (ωa/c)2 at l = a; tiny, about 10−15.
Question 342. Using the expression for volume density of magnetic energy, demonstrate that the amount of work contributed to magnetization of a unit volume of para- or diamagnetic is equal to A = −JB/2.
Solution. The total energy of the magnetic field is ½∫(B·H)dV = ½∫B·(B/μ0 − J)dV = (1/(2μ0))∫B·B dV − ½∫J·B dV. The first term is the energy of the field B in vacuum. The second term can be interpreted as the energy of magnetization, and has the density −½J·B. Hence the work contributed to magnetization of a unit volume is A = −JB/2.
Teacher's Note: Use H = B/μ0 − J; the term beyond vacuum field energy is the magnetization work.
Exam Note: Show H = B/μ0 − J; identify the second term.
Question 343. Two identical coils, each of inductance L, are interconnected (a) in series, (b) in parallel. Assuming the mutual inductance of the coils to be negligible, find the inductance of the system in both cases.
Solution. (a) In series, the current I flows through both coils, and the total emf induced when the current changes is −2L dI/dt = −L′ dI/dt, or L′ = 2L.
(b) In parallel, the current flowing through either coil is I/2 and the emf induced is −L(½ dI/dt). Equating this to −L′ dI/dt, we find L′ = ½L.
Teacher's Note: Series: same current, emfs add. Parallel: same emf, each coil carries half the current.
Exam Note: Series 2L, parallel L/2, both valid only when mutual inductance is zero.
IE Irodov Solutions for JEE Mathematics: IE Irodov Solutions Chapter 21 Electromagnetic Induction Maxwells Equations Part 1
Complete Math Solutions for IE Irodov Solutions Chapter 21 Electromagnetic Induction Maxwells Equations Part 1
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 21 Electromagnetic Induction Maxwells Equations Part 1 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.