IE Irodov Solutions Chapter 20 Constant Magnetic Field Magnetics Part 2

Official IE Irodov Textbook Solutions: JEE Physics Chapter 20 Constant Magnetic Field Magnetics

Access comprehensive textbook solutions for Chapter 20 Constant Magnetic Field Magnetics using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Physics: Chapter 20 Constant Magnetic Field Magnetics

View or download the dedicated Chapter 20 Constant Magnetic Field Magnetics solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Constant Magnetic Field - Questions 252 to 287

Questions 252-287

Question 252. A coil carrying a current I = 10 mA is placed in a uniform magnetic field so that its axis coincides with the field direction. The single-layer winding of the coil is made of copper wire with diameter d = 0.10 mm, radius of turns is equal to R = 30 mm. At what value of the induction of the external magnetic field can the coil winding be ruptured?

Solution. Each element of length dl experiences a force BI dl (radially outward, since the field is along the axis). This causes a tension T in the wire. (Figure: a circular turn with the field into the page; an element dl subtending angle dα at the centre, with the force BI dl outward and tension T acting at each end of the element.)

For equilibrium, T dα = BI dl, where dα is the angle subtended by the element at the centre. Then, T = BI dl/dα = BIR.

The wire experiences a stress BIR/(πd2/4). This must equal the breaking stress σm for rupture. Thus,

Bmax = πd2σm/(4IR).

Teacher's Note: Hoop-tension balance: force BI dl is resisted by 2T sin(dα/2), so T = BIR.

Exam Note: Derive T = BIR, then stress = T/area.

Question 253. A copper wire with cross-sectional area S = 2.5 mm2 bent to make three sides of a square can turn about a horizontal axis OO' (Fig. 3.69). The wire is located in uniform vertical magnetic field. Find the magnetic induction if on passing a current I = 16 A through the wire the latter deflects by an angle θ = 20°.

Solution. The Ampere forces on the sides OP and O'P' are directed along the same line, in opposite directions and have equal values, hence the net force as well as the net torque of these forces about the axis OO' is zero. The Ampere force on the segment PP' and the corresponding moment of this force about the axis OO' is effective and is deflecting in nature. (Figure: the frame hangs from the axis OO' with the field B vertical; the weights Slρg act on each of the three sides and the Ampere force IlB acts on the lower side PP'.)

In equilibrium (in the dotted position) the deflecting torque must be equal to the restoring torque, developed due to the weight of the shape. Let the length of each side be l and ρ be the density of the material, then,

iB(l cos θ) = (Slρ)g (l/2) sin θ + (Slρ)g (l/2) sin θ + (Slρ)gl sin θ

or, il2B cos θ = 2Sρgl2 sin θ

Hence, B = (2Sρg/i) tan θ.

Putting ρ = 8.9 g/cm3 (copper): B = 2 × 8.9×103 × 2.5×10-6 × 9.8 × tan 20° / 16 ≈ 10 mT.

Teacher's Note: Net torque from the two vertical sides' forces about OO' is zero; balance IlB torque against weight torque.

Exam Note: Equate magnetic torque with the three weight torques.

Question 254. A small coil C with N = 200 turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in Fig. 3.70. The cross-sectional area of the coil is S = 1.0 cm2, the length of the arm OA of the balance beam is l = 30 cm. When there is no current in the coil the balance is in equilibrium. On passing a current I = 22 mA through the coil the equilibrium is restored by putting the additional counterweight of mass Δm = 60 mg on the balance pan. Find the magnetic induction at the spot where the coil is located.

Solution. We know that the torque acting on a magnetic dipole is N = pm × B. But pm = iSn, where n is the unit normal to the plane of the loop, directed along the advance of a right-handed screw rotated in the sense of the current in the loop. (Figure: coil C between the poles N and S at the left end of the beam pivoted at O, pan at the right end A.)

On passing a current through the coil, this torque acting on the magnetic dipole is counterbalanced by the moment of the additional weight about O. Hence, the direction of current in the loop must be as shown in the figure.

pm × B = −l × Δmg, or NiSB = Δmgl.

So, B = Δmgl/(NiS) = 0.4 T on putting the values.

Teacher's Note: Torque on dipole pmB balances weight torque Δm g l about the pivot; N turns multiply pm.

Exam Note: State NiSB = Δmgl, then substitute (SI units).

Question 255. A square frame carrying a current I = 0.90 A is located in the same plane as a long straight wire carrying a current I0 = 5.0 A. The frame side has a length a = 8.0 cm. The axis of the frame passing through the midpoints of opposite sides is parallel to the wire and is separated from it by the distance which is η = 1.5 times greater than the side of the frame. Find: (a) Ampere force acting on the frame; (b) the mechanical work to be performed in order to turn the frame through 180° about its axis, with the currents maintained constant.

Solution. (a) As is clear from the condition, Ampere's forces on the sides (2) and (4) are equal in magnitude but opposite in direction. Hence the net effective force on the frame is the resultant of the forces experienced by the sides (1) and (3). (Figure: the wire carrying i0 upward at the left; the frame lies to its right, side 1 nearer the wire carrying i upward, side 3 farther carrying i downward; the dashed axis is at distance ηa from the wire.)

Now, the Ampere force on (1), F1 = (μ0/2π) i i0/(η − 1/2) (the side length a cancels), and that on (3), F3 = (μ0/2π) i0 i/(η + 1/2).

So, the resultant force on the frame = F1 − F3 (as they are opposite in nature)

= 2μ0 i i0/(π(4η2 − 1)).

Corrected: the book prints 0.40 μN, but substituting the given values, 2 × 4π×10-7 × 0.9 × 5.0/(π × 8) = 0.45 μN (attractive, towards the wire).

(b) Work done in turning the frame through some angle, A = ∫ i dΦ = i(Φf − Φi), where Φf is the flux through the frame in the final position, and Φi that in the initial position.

Here, |Φf| = |Φi| = Φ and Φi = −Φf, so ΔΦ = 2Φ and A = i·2Φ.

Hence, A = 2i ∫ B·dS = 2i ∫a(η−1/2)a(η+1/2) (μ0 i0/2πr) a dr = (μ0 i i0 a/π) ln((2η+1)/(2η−1)).

Numerically, A = 4×10-7 × 0.9 × 5.0 × 0.08 × ln 2 ≈ 0.10 μJ.

Teacher's Note: Opposite sides 2 and 4 cancel; nearer side 1 outweighs side 3. Work equals i times flux change.

Exam Note: Net force F1−F3; work A = iΔΦ with ΔΦ = 2Φ.

Question 256. Two long parallel wires of negligible resistance are connected at one end to a resistance R and at the other end to a dc voltage source. The distance between the axes of the wires is η = 20 times greater than the cross-sectional radius of each wire. At what value of resistance R does the resultant force of interaction between the wires turn into zero?

Solution. There are excess surface charges on each wire (irrespective of whether the current is flowing through them or not). Hence in addition to the magnetic force Fm we must take into account the electric force Fe. Suppose that an excess charge λ corresponds to a unit length of the wire, then electric force exerted per unit length of the wire by the other wire can be found with the help of Gauss's theorem. (Figure: the upper wire carries + charges, the lower wire − charges, connected through R at the right; E points from upper to lower wire.)

Fe = λE = λ (1/4πε0)(2λ/l) = 2λ2/(4πε0l), (1)

where l is the distance between the axes of the wires. The magnetic force acting per unit length of the wire can be found with the help of the theorem on circulation of vector B,

Fm = (μ0/4π)(2i2/l), (2)

where i is the current in the wire.

Now, from the relation λ = Cφ, where C is the capacitance of the wires per unit length and is given in Problem Q.108, and φ = iR,

λ = (πε0/ln η) iR, or i/λ = ln η/(πε0R). (3)

Dividing (2) by (1) and then substituting the value of i/λ from (3), we get,

Fm/Fe = (μ0/ε0)(ln η)2/(π2R2).

The resultant force of interaction vanishes when this ratio equals unity. This is possible when R = R0, where

R0 = √(μ0/ε0) · ln η/π = 0.36 kΩ.

Teacher's Note: Opposite wire charges attract, antiparallel currents repel; zero net force needs Fm = Fe.

Exam Note: Equate magnetic and electric force per length; use λ = Cφ.

Question 257. A direct current I flows in a long straight conductor whose cross-section has the form of a thin half-ring of radius R. The same current flows in the opposite direction along a thin conductor located on the "axis" of the first conductor (point O in Fig. 3.61). Find the magnetic interaction force between the given conductors reduced to a unit of their length.

Solution. (Fig. 3.61: a thin half-ring conductor of radius R with its centre O, where the second thin conductor lies.) Use Q.225. The magnetic field at the axis due to the conductor with semicircular cross section is B = μ0I/(π2R).

Then ∂F/∂l = BI = μ0I2/(π2R).

Teacher's Note: Field on the axis of a half-ring conductor is μ0I/(π2R); force per length is BI.

Exam Note: Use the field from Q.225, then F/l = BI.

Question 258. Two long thin parallel conductors of the shape shown in Fig. 3.71 carry direct currents I1 and I2. The separation between the conductors is a, the width of the right-hand conductor is equal to b. With both conductors lying in one plane, find the magnetic interaction force between them reduced to a unit of their length.

Solution. (Fig. 3.71: a thin wire carrying I1 upward; to its right, at distance a, a flat strip of width b carrying I2 upward.) We know that Ampere's force per unit length on a wire element in a magnetic field is given by dFn = i(n × B), where n is the unit vector along the direction of current. (1)

Now, let us take a strip element of the conductor i2 of width dr at distance r from the wire. This element is in the magnetic field produced by the current i1, which is directed normally into the plane of the paper and whose magnitude is given by |B| = μ0I1/(2πr). (2)

From Eqs. (1) and (2), dFn = (I2/b) dr (n × B) (because the current through the element equals (I2/b) dr).

So, dFn = (μ0/2π)(I1I2/b)(dr/r), towards left (as n ⊥ B).

Hence the magnetic force on the conductor:

Fn = (μ0/2π)(I1I2/b) ∫aa+b dr/r = (μ0I1I2/2πb) ln((a+b)/a) (towards left).

Then according to Newton's third law the magnitude of the sought magnetic interaction force is

F = (μ0I1I2/2πb) ln((a+b)/a).

Teacher's Note: Split the strip into filaments carrying (I2/b)dr, each in field μ0I1/2πr, then integrate.

Exam Note: Integrate filament forces from a to a+b; get a log.

Question 259. A system consists of two parallel planes carrying currents producing a uniform magnetic field of induction B between the planes. Outside this space there is no magnetic field. Find the magnetic force acting per unit area of each plane.

Solution. By the circulation theorem B = μ0i, where i = current per unit length along the plane perpendicular to the paper. Currents flow in the opposite sense in the two planes and produce the given field B by superposition.

The field due to one of the plates is just B/2. The force on the plate is

(1/2) B × i × Length × Breadth = B2/(2μ0) per unit area.

(Recall the formula F = BIl on a straight wire.)

Teacher's Note: Each sheet feels only the other sheet's field B/2, not its own.

Exam Note: Use B/2 on each plane: F = B²/2μ0 per area.

Question 260. A conducting current-carrying plane is placed in an external uniform magnetic field. As a result, the magnetic induction becomes equal to B1 on one side of the plane and to B2, on the other. Find the magnetic force acting per unit area of the plane in the cases illustrated in Fig. 3.72. Determine the direction of the current in the plane in each case.

Solution. (Fig. 3.72: the plane is vertical; B1 is on its left and B2 on its right. (a) both fields point upward, B1 > B2; (b) B1 points upward, B2 downward; (c) both fields are inclined to the plane, at angles θ1 and θ2 to it.)

(a) The external field must be (B1 + B2)/2, which when superposed with the internal field (B1 − B2)/2 (of opposite sign on the two sides of the plate) must give the actual field. Now

(B1 − B2)/2 = (1/2)μ0i, or i = (B1 − B2)/μ0.

Thus, F = (B12 − B22)/(2μ0).

(b) Here, the external field must be (B1 − B2)/2 upward with an internal field (B1 + B2)/2, upward on the left and downward on the right. Thus,

i = (B1 + B2)/μ0 and F = (B12 − B22)/(2μ0).

(c) Our boundary condition following from Gauss' law is B1 cos θ1 = B2 cos θ2. Also, (B1 sin θ1 + B2 sin θ2) = μ0i where i = current per unit length.

The external field parallel to the plate must be (B1 sin θ1 − B2 sin θ2)/2. (The perpendicular component B1 cos θ1 does not matter since the corresponding force is tangential.)

Thus, F = (B12 sin2 θ1 − B22 sin2 θ2)/(2μ0) per unit area = (B12 − B22)/(2μ0) per unit area.

The direction of the current in the plane conductor is perpendicular to the paper and beyond the drawing.

Teacher's Note: Split actual field into external (average) plus the sheet's own (half-difference); only the external part exerts force.

Exam Note: Use boundary conditions; F = (B1²−B2²)/2μ0.

Question 261. In an electromagnetic pump designed for transferring molten metals a pipe section with metal is located in a uniform magnetic field of induction B (Fig. 3.73). A current I is made to flow across this pipe section in the direction perpendicular both to the vector B and to the axis of the pipe. Find the gauge pressure produced by the pump if B = 0.10 T, I = 100 A, and a = 2.0 cm.

Solution. (Fig. 3.73: a rectangular pipe section with B vertical, the current I horizontal across the section, and a the vertical height of the section; the pipe axis is perpendicular to both.) The current density is I/(aL), where L is the length of the section along the current. The difference in pressure produced must be

Δp = (1/aL) × B × (abL)/(ab) = IB/a.

Numerically, Δp = 100 × 0.10/0.020 = 500 Pa = 0.5 kPa.

Teacher's Note: Force density jB acts on the metal; pressure = force over cross-section area ab gives IB/a.

Exam Note: Pressure = IB/a; check units give pascals.

Question 262. A current I flows in a long thin walled cylinder of radius R. What pressure do the walls of the cylinder experience?

Solution. Let t be the thickness of the wall of the cylinder. Then J = I/(2πRt) along the z axis. The magnetic field due to this at a distance r (R − t/2 < r < R + t/2) is given by

Bφ(2πr) = μ0 (I/(2πRt)) π {r2 − (R − t/2)2}

or, Bφ = (μ0I/(4πRrt)) {r2 − (R − t/2)2}.

Now, F = ∫ J × B dV and

p = Fr/(2πRL) = (1/(2πRL)) ∫R−t/2R+t/2 (μ0I2/(8π2R2t2r)) {r2 − (R − t/2)2} × 2πrL dr

= (μ0I2/(8π2R3t2)) ∫ {r2 − (R − t/2)2} dr

= (μ0I2/(8π2R3t2)) [ ((R + t/2)3 − (R − t/2)3)/3 − (R − t/2)2 t ]

= (μ0I2/(8π2R3t)) [Rt + O(t2)] = μ0I2/(8π2R2).

Teacher's Note: Field rises from 0 to μ0I/2πR across the wall; effective field is half the surface value.

Exam Note: Integrate J×B through thin wall; answer μ0I²/8π²R².

Question 263. What pressure does the lateral surface of a long straight solenoid with n turns per unit length experience when a current I flows through it?

Solution. When self-forces are involved, a typical factor of 1/2 comes into play. For example, the force on a current carrying straight wire in a magnetic induction B is BIl. If the magnetic induction B is due to the current itself then the force can be written as F = ∫0I B(I') dI' l. If B(I') ∝ I', then this becomes F = (1/2) B(I) I l.

In the present case, B(I) = μ0nI and this acts on nl ampere-turns per unit length, so,

pressure p = F/Area = (1/2) μ0n (I × nI × 1 × l)/(1 × l) = (1/2) μ0n2I2.

Teacher's Note: Self-field acts with a factor 1/2: the winding sits in the average of inside and outside fields.

Exam Note: State p = ½μ0n²I² (= B²/2μ0).

Question 264. A current I flows in a long single-layer solenoid with cross-sectional radius R. The number of turns per unit length of the solenoid equals n. Find the limiting current at which the winding may rupture if the tensile strength of the wire is equal to Flim.

Solution. The magnetic induction B in the solenoid is given by B = μ0nI. The force on an element dl of the current carrying conductor is

dF = (1/2) μ0n I I dl = (1/2) μ0nI2 dl.

This is radially outwards. The factor 1/2 is explained above (Q.263).

To relate dF to the tensile strength Flim we proceed as follows. Consider the equilibrium of the element dl. The longitudinal forces F (tension at each end of the element) have a radial component equal to dF = 2F sin(dθ/2) = F dθ.

Thus using dl = R dθ, F = (1/2) μ0nI2R.

This equals Flim when I = Ilim = √(2Flim/(μ0nR)).

Note that Flim, here, is actually a force and not a stress.

Teacher's Note: Outward magnetic force per length is ½μ0nI²; ring tension is that force times R.

Exam Note: Balance tension F against ½μ0nI²R; solve for I.

Question 265. A parallel-plate capacitor with area of each plate equal to S and the separation between them equal to d is put into a stream of conducting liquid with resistivity ρ. The liquid moves parallel to the plates with a constant velocity v. The whole system is located in a uniform magnetic field of induction B, vector B being parallel to the plates and perpendicular to the stream direction. The capacitor plates are interconnected by means of an external resistance R. What amount of power is generated in that resistance? At what value of R is the generated power the highest? What is this highest power equal to?

Solution. Resistance of the liquid between the plates = ρd/S.

Voltage between the plates = Ed = vBd.

Current through the plates = vBd/(R + ρd/S).

Power generated in the external resistance R,

P = v2B2d2R/(R + ρd/S)2 = v2B2d2/(√R + ρd/(S√R))2 = v2B2d2/[ (R1/4 − (ρd/(S√R))1/2)2 + 2√(ρd/S) ]2.

This is maximum when R = ρd/S and Pmax = v2B2Sd/(4ρ).

Teacher's Note: The moving liquid is a source of emf vBd with internal resistance ρd/S; maximum power at R = internal resistance.

Exam Note: Apply maximum power transfer: R equals internal resistance ρd/S.

Question 266. A straight round copper conductor of radius R = 5.0 mm carries a current I = 50 A. Find the potential difference between the axis of the conductor and its surface. The concentration of the conduction electrons in copper is equal to n = 0.9×1023 cm-3.

Solution. The electrons in the conductor are drifting with a speed of vd = J/(ne) = I/(πR2ne), where e = magnitude of the charge on the electron, n = concentration of the conduction electrons.

The magnetic field inside the conductor due to this current is given by Bφ(2πr) = πr2 (I/πR2) μ0, or Bφ = μ0Ir/(2πR2).

A radial electric field vBφ must come into being in equilibrium. Its P.D. is

Δφ = ∫0R (I/(πR2ne)) (μ0Ir/(2πR2)) dr = (I/(πR2ne)) (μ0I/4π) = μ0I2/(4π2R2ne).

Corrected: the book prints the last denominator as 4πR2ne, which is inconsistent with the preceding step; the correct result is as above. Numerically, Δφ = 1.2566×10-6 × 2500/(4π2 × 2.5×10-5 × 0.9×1029 × 1.6×10-19) ≈ 0.22 nV.

Teacher's Note: Magnetic force on drifting electrons is balanced by a radial Hall-type field; integrate vB from axis to surface.

Exam Note: Set eE = evB, integrate over r; keep π2.

Question 267. In Hall effect measurements in a sodium conductor the strength of a transverse field was found to be equal to E = 5.0 μV/cm with a current density j = 200 A/cm2 and magnetic induction B = 1.00 T. Find the concentration of the conduction electrons and its ratio to the total number of atoms in the given conductor.

Solution. Here, vd = E/B and j = nevd,

so, n = jB/(eE) = (200×104 A/m2 × 1 T)/(1.6×10-19 C × 5×10-4 V/m) = 2.5×1028 per m3 = 2.5×1022 per c.c.

Atomic weight of Na being 23 and its density ≈ 1 g/cm3, molar volume is 23 c.c. Thus number of atoms per unit volume is 6×1023/23 = 2.6×1022 per c.c.

Thus there is almost one conduction electron per atom.

Teacher's Note: Steady Hall state: eE = evB, so v = E/B; then n = j/(ev). Compare with atom density.

Exam Note: Convert units first (μV/cm to V/m, A/cm² to A/m²).

Question 268. Find the mobility of the conduction electrons in a copper conductor if in Hall effect measurements performed in the magnetic field of induction B = 100 mT the transverse electric field strength of the given conductor turned out to be η = 3.1×103 times less than that of the longitudinal electric field.

Solution. By definition, mobility = (drift velocity)/(electric field component causing this drift), or μ = v/EL.

On the other hand, ET = vB = EL/η, as given, so

μ = 1/(ηB) = 3.2×10-3 m2/(V·s).

Teacher's Note: Mobility is drift speed per unit longitudinal field; the Hall field gives v = ET/B.

Exam Note: Write ET = vB = EL/η, then μ = 1/(ηB).

Question 269. A small current-carrying loop is located at a distance r from a long straight conductor with current I. The magnetic moment of the loop is equal to pm. Find the magnitude and direction of the force vector applied to the loop if the vector pm (a) is parallel to the straight conductor; (b) is oriented along the radius vector r; (c) coincides in direction with the magnetic field produced by the current I at the point where the loop is located.

Solution. Due to the straight conductor, Bφ = μ0I/(2πr). We use the formula F = (pm·∇)B.

(a) The vector pm is parallel to the straight conductor. F = pm ∂B/∂z = 0, because neither the direction nor the magnitude of B depends on z.

(b) The vector pm is oriented along the radius vector r. F = pm ∂B/∂r. The direction of B at r + dr is parallel to the direction at r. Thus only the φ component of F will survive.

Fφ = pm ∂/∂r (μ0I/2πr) = −μ0Ipm/(2πr2).

(c) The vector pm coincides in direction with the magnetic field produced by the conductor carrying current I.

F = pm (1/r) ∂/∂φ ((μ0I/2π) eφ) = (μ0Ipm/2πr2) ∂eφ/∂φ.

As ∂eφ/∂φ = −er, F = −(μ0Ipm/2πr2) er, i.e. magnitude μ0Ipm/(2πr2), directed towards the conductor.

Teacher's Note: Use F = (pm·∇)B; only the direction of derivative differs in each case; the field is uniform along z.

Exam Note: Choose the derivative direction; note ∂eφ/∂φ = −er.

Question 270. A small current-carrying coil having a magnetic moment pm is located at the axis of a round loop of radius R with current I flowing through it. Find the magnitude of the vector force applied to the coil if its distance from the centre of the loop is equal to x and the vector pm coincides in direction with the axis of the loop.

Solution. (Figure: a circular loop of radius R with the x-axis along its axis; the small coil at distance x with pm along the axis.)

Fx = pm ∂Bx/∂x. But, Bx = (μ0I/4π) ∫ R dl/(x2 + R2)3/2 = μ0IR2/(2(x2 + R2)3/2).

So, F = (μ0/4π) (I·2πR2/(x2 + R2)5/2) (3/2)·2x·pm = (μ0/4π) 6πR2Ipmx/(x2 + R2)5/2 = 3μ0IR2pmx/(2(x2 + R2)5/2) (magnitude; the force is directed towards the loop).

Teacher's Note: Axial field gradient dB/dx of a loop, multiplied by pm; the minus sign shows attraction.

Exam Note: Differentiate Bx(x) and multiply by pm.

Question 271. Find the interaction force of two coils with magnetic moments p1m = 4.0 mA·m2 and p2m = 6.0 mA·m2 and collinear axes if the separation between the coils is equal to l = 20 cm which exceeds considerably their linear dimensions.

Solution. F = p2m ∂/∂l [ (μ0/4π)(3(p1m·r)r − p1mr2)/r5 ] = p2m ∂/∂l [ (μ0/2π) p1m/l3 ] = −(3/2) μ0p1mp2m/(πl4) = 9 nN in magnitude (the coils attract when the moments point the same way).

Teacher's Note: Field on the axis of dipole 1 is μ0p/(2πl3); force is p2 times its gradient.

Exam Note: Differentiate dipole axial field; substitute SI values (mA·m² = 10-3).

Question 272. A permanent magnet has the shape of a sufficiently thin disc magnetized along its axis. The radius of the disc is R = 1.0 cm. Evaluate the magnitude of a molecular current I' flowing along the rim of the disc if the magnetic induction at the point on the axis of the disc, lying at a distance x = 10 cm from its centre, is equal to B = 30 μT.

Solution. From Q.270, for x ≫ R, Bx ≈ μ0I'R2/(2x3), or,

I' ≈ 2Bxx3/(μ0R2) = 2 × 3×10-5 T × (10-1 m)3/(1.26×10-6 × (10-2 m)2) ≈ 0.5 kA.

Teacher's Note: A thin magnetised disc equals a surface current loop; far on-axis its field is μ0I'R²/2x³.

Exam Note: Use far-axis loop field; convert cm to metres before substituting.

Question 273. The magnetic induction in vacuum at a plane surface of a uniform isotropic magnetic is equal to B, the vector B forming an angle α with the normal of the surface. The permeability of the magnetic is equal to μ. Find the magnitude of the magnetic induction B' in the magnetic in the vicinity of its surface.

Solution. (Figure: the magnet occupies the left half-space with fields B' and H'; in vacuum on the right B makes angle α with the surface normal n.)

B'n = B cos α, H't = (1/μ0) B sin α, B't = μB sin α (taking H't = Ht continuous and B' = μμ0H').

So, B' = B √(μ2 sin2 α + cos2 α).

Teacher's Note: Normal B and tangential H are continuous across the boundary; then B't = μBt.

Exam Note: Apply boundary conditions: Bn and Ht continuous.

Question 274. The magnetic induction in vacuum at a plane surface of a magnetic is equal to B and the vector B forms an angle θ with the normal n of the surface (Fig. 3.74). The permeability of the magnetic is equal to μ. Find: (a) the flux of the vector H through the spherical surface S of radius R, whose centre lies on the surface of the magnetic; (b) the circulation of the vector B around the square path Γ with side l located as shown in the figure.

Solution. (Fig. 3.74: the magnetic fills the lower half-space; in vacuum above it B makes the angle θ with the upward normal n; the sphere S of radius R is centred on the surface; the small square path Γ of side l straddles the surface.)

(a) ∮ H·dS = ∮ (B/μ0 − J)·dS = −∮ J·dS, since ∮ B·dS = 0.

Now J is non-vanishing only in the bottom half of the sphere. Here, B'n = B cos θ, H't = (1/μ0) B sin θ, B't = μB sin θ, H'n = B cos θ/(μμ0).

Jn = (B cos θ/μ0)(1 − 1/μ) and Jt = ((μ − 1)/μ0) B sin θ.

Only Jn contributes to the surface integral and

−∮ J·dS = −∮lower J·dS = ∮lower Jn dS = (πR2B cos θ/μ0)(1 − 1/μ).

(b) ∮Γ B·dr = (Bt − B't) l = (1 − μ) B l sin θ.

Teacher's Note: H-flux equals minus J-flux; only normal J through the lower hemisphere counts.

Exam Note: Use boundary conditions; hemisphere cross-section is πR².

Question 275. A direct current I flows in a long round uniform cylindrical wire made of paramagnetic with susceptibility χ. Find: (a) the surface molecular current I's; (b) the volume molecular current I'v. How are these currents directed toward each other?

Solution. Inside the cylindrical wire there is an external current of density I/(πR2); this gives a magnetic field Hφ with Hφ·2πr = I r2/R2, or Hφ = Ir/(2πR2).

From this Bφ = μμ0Ir/(2πR2) and Jφ = ((μ − 1)/2π)(Ir/R2) = χIr/(2πR2) = magnetization.

Hence the total volume molecular current is ∮r=R Jφ·dr = ∫ (χI/2πR) dl = χI, i.e. I'v = χI.

The surface current is obtained by using the equivalence of the surface current density to J × n; this gives rise to a surface current density in the z-direction of −χI/(2πR).

The total molecular surface current is I's = −(χI/2πR)(2πR) = −χI.

The two currents have opposite signs (the volume current is along I, the surface current opposite to it).

Teacher's Note: Magnetisation J = χH; its circulation gives the volume current, with an opposite surface current.

Exam Note: Find H, then J = χH; check I's + I'v = 0.

Question 276. Half of an infinitely long straight current-carrying solenoid is filled with magnetic substance as shown in Fig. 3.75. Draw the approximate plots of magnetic induction B, strength H, and magnetization J on the axis as functions of x.

Solution. (Fig. 3.75: a long solenoid with its left half (x < 0) empty and its right half (x > 0) filled with magnetic of permeability μ; O is the junction.)

We can obtain the form of the curves, required here, by qualitative arguments.

From ∮ H·dl = I, we get H(x ≫ 0) = H(x ≪ 0) = nI.

Then B(x ≫ 0) = μμ0nI and B(x ≪ 0) = μ0nI.

Also, B(x < 0) = μ0H(x < 0) and J(x < 0) = 0.

B is continuous at x = 0, H is not. These give the required curves, as shown in the book's answer sheet (the plots themselves are not printed in this source): B rises from μ0nI far left to μμ0nI far right, continuous at x = 0; H is nI far on both sides with a change near x = 0; J = 0 for x < 0 and tends to (μ − 1)nI far inside the magnetic.

Teacher's Note: Circulation fixes H = nI far away on both sides; B is continuous at the junction.

Exam Note: Sketch B continuous; J = 0 for x<0.

Question 277. An infinitely long wire with a current I flowing in it is located in the boundary plane between two non-conducting media with permeabilities μ1 and μ2. Find the modulus of the magnetic induction vector throughout the space as a function of the distance r from the wire. It should be borne in mind that the lines of the vector B are circles whose centres lie on the axis of the wire.

Solution. The lines of the B as well as H field are circles around the wire. Thus, applying the circulation theorem over a circle of radius r (half in each medium),

H1πr + H2πr = I, or H1 + H2 = I/(πr).

Also μ0μ1H1 = μ2H2μ0 = B1 = B2 = B.

Thus H1 = (μ2/(μ1 + μ2)) I/(πr), H2 = (μ1/(μ1 + μ2)) I/(πr), and

B = μ0 (μ1μ2/(μ1 + μ2)) I/(πr).

Teacher's Note: B is circular, so tangential to the boundary: it must be continuous, whereas H differs in each medium.

Exam Note: Apply circulation over πr in each medium and B1 = B2.

Question 278. A round current-carrying loop lies in the plane boundary between magnetic and vacuum. The permeability of the magnetic is equal to μ. Find the magnetic induction B at an arbitrary point on the axis of the loop if in the absence of the magnetic the magnetic induction at the same point becomes equal to B0. Generalize the obtained result to all points of the field.

Solution. The medium I is vacuum and contains a circular current carrying coil with current I. The medium II is a magnetic with permeability μ. The boundary is the plane z = 0 and the coil is in the plane z = l. To find the magnetic induction, we note that the effect of the magnetic medium can be written as due to an image coil in II as far as the medium I is concerned. On the other hand, the induction in II can be written as due to the coil in I, carrying a different current. It is sufficient to consider the far away fields and ensure that the boundary conditions are satisfied there. Now for the actual coil in medium I,

Br = −(2pm cos θ'/r3)(μ0/4π), Bθ = (pm sin θ'/r3)(μ0/4π).

So, Bz = (μ0pm/4π)(2 cos2 θ' − sin2 θ') and Bx = (μ0pm/4π)(−3 sin θ' cos θ'), where pm = I(πa2), a = radius of the coil.

Similarly due to the image coil, Bz = (μ0p'm/4π)(2 cos2 θ' − sin2 θ'), Bx = (μ0p'm/4π)(3 sin θ' cos θ'), p'm = I'(πa2).

As far as the medium II is concerned, we write similarly Bz = (μ0p''m/4π)(2 cos2 θ' − sin2 θ'), Bx = (μ0p''m/4π)(−3 sin θ' cos θ'), p''m = I''(πa2).

The boundary conditions are pm + p'm = p''m (from B1n = B2n) and −pm + p'm = −(1/μ)p''m (from H1t = H2t).

Thus, I'' = (2μ/(μ + 1)) I, I' = ((μ − 1)/(μ + 1)) I.

In the limit, when the coil is on the boundary, the magnetic field everywhere can be obtained by taking the current to be (2μ/(μ + 1)) I. Thus, B = (2μ/(μ + 1)) B0.

Teacher's Note: Replace the magnetic by an image current I' = (μ−1)I/(μ+1); the boundary conditions fix both currents.

Exam Note: Match Bn and Ht at the boundary; result B = 2μB0/(μ+1).

Question 279. When a ball made of uniform magnetic is introduced into an external uniform magnetic field with induction B0, it gets uniformly magnetized. Find the magnetic induction B inside the ball with permeability μ; recall that the magnetic field inside a uniformly magnetized ball is uniform and its strength is equal to H' = −J/3, where J is the magnetization.

Solution. We use the fact that within an isolated uniformly magnetized ball, H' = −J/3, B' = 2μ0J/3, where J is the magnetization vector. Then in a uniform magnetic field with induction B0 we have by superposition,

Bin = B0 + 2μ0J/3, Hin = B0/μ0 − J/3,

or, Bin + 2μ0Hin = 3B0. Also, Bin = μμ0Hin.

Thus, Hin = 3B0/(μ0(μ + 2)) and Bin = 3μB0/(μ + 2).

Teacher's Note: Superpose the ball's own demagnetising field (H = −J/3) on the applied field; combine with B = μμ0H.

Exam Note: Eliminate J from the superposition equations; B = 3μB0/(μ+2).

Question 280. N = 300 turns of thin wire are uniformly wound on a permanent magnet shaped as a cylinder whose length is equal to l = 15 cm. When a current I = 3.0 A was passed through the wiring the field outside the magnet disappeared. Find the coercive force Hc of the material from which the magnet was manufactured.

Solution. The coercive force Hc is just the magnetic field within the cylinder. This is, by the circulation theorem, Hc = NI/l = 300 × 3.0/0.15 = 6 kA/m (from ∮ H·dr = I, total current, considering a rectangular contour).

Teacher's Note: When the outside field vanishes, the winding's H cancels the magnet's residual H; hence Hc = nI.

Exam Note: Use H = NI/l with l in metres.

Question 281. A permanent magnet is shaped as a ring with a narrow gap between the poles. The mean diameter of the ring equals d = 20 cm. The width of the gap is equal to b = 2.0 mm and the magnetic induction in the gap is equal to B = 40 mT. Assuming that the scattering of the magnetic flux at the gap edges is negligible, find the modulus of the magnetic field strength vector inside the magnet.

Solution. We use ∮ H·dl = 0. (Figure: a ring magnet with a narrow gap; H inside the magnet runs round the ring, B in the gap points across it.)

Neglecting the fringing of the lines of force, we write this as

H(πd − b) + (B/μ0) b = 0, or H = −Bb/(μ0πd) = 101 A/m (taking πd − b ≈ πd).

The sense of H is opposite to B.

Teacher's Note: No free current, so ∮H·dl = 0; H in the magnet must oppose B and balance B/μ0 across the gap.

Exam Note: Set ∮H·dl = 0 with H = B/μ0 in the gap.

Question 282. An iron core shaped as a tore with mean radius R = 250 mm supports a winding with the total number of turns N = 1000. The core has a cross-cut of width b = 1.00 mm. With a current I = 0.85 A flowing through the winding, the magnetic induction in the gap is equal to B = 0.75 T. Assuming the scattering of the magnetic flux at the gap edges to be negligible, find the permeability of iron under these conditions.

Solution. Here, ∮ H·dl = NI, or H(2πR) + Bb/μ0 = NI, so H = (NIμ0 − Bb)/(2πRμ0).

Hence, μ = B/(μ0H) = 2πRB/(μ0NI − Bb) = 3700.

Teacher's Note: B is the same in iron and gap (flux continuity); the gap uses part of NI.

Exam Note: Apply ∮H·dl = NI; then μ = B/μ0H.

Question 283. Fig. 3.76 illustrates a basic magnetization curve of iron (commercial purity grade). Using this plot, draw the permeability μ as a function of the magnetic field strength H. At what value of H is the permeability the greatest? What is μmax equal to?

Solution. (Fig. 3.76: B (in T, up to 1.5) against H (in kA/m, 0 to 0.6) for commercial iron; the curve rises almost vertically near H ≈ 0.05 kA/m to about 1 T and then flattens towards 1.5 T.)

One has to draw the graph of μ = B/(μ0H) versus H from the given graph.

The μ–H graph starts out horizontally, and then rises steeply at about H = 0.04 kA/m before falling again. μmax ≈ 10,000.

Teacher's Note: Take B/H at several points on the curve and divide by μ0; the steepest chord from origin gives μmax.

Exam Note: Read B at several H, compute μ = B/μ0H, locate the peak.

Question 284. A thin iron ring with mean diameter d = 50 cm supports a winding consisting of N = 800 turns carrying current I = 3.0 A. The ring has a cross-cut of width b = 2.0 mm, and using the plot shown in Fig. 3.76, find the permeability of iron under these conditions.

Solution. From the theorem on circulation of vector H, Hπd + Bb/μ0 = NI, or

B = μ0NI/b − (μ0πd/b)H = (1.51 − 0.987H),

where B is in tesla and H in kA/m. Besides, B and H are interrelated as in Fig. 3.76. Thus we have to solve for B, H graphically by simultaneously drawing the two curves (the magnetization curve and the straight line given above) and finding the point of intersection. It is at H = 0.26 kA/m, B = 1.25 T.

Then, μ = B/(μ0H) ≈ 4000.

Teacher's Note: Gap equation gives a straight load line B = 1.51 − 0.987H; intersect it with the magnetisation curve.

Exam Note: Draw the load line on the B–H graph; read the intersection.

Question 285. A long thin cylindrical rod made of paramagnetic with magnetic susceptibility χ and having a cross-sectional area S is located along the axis of a current-carrying coil. One end of the rod is located at the coil centre where the magnetic induction is equal to B whereas the other end is located in the region where the magnetic field is practically absent. What is the force that the coil exerts on the rod?

Solution. From the formula F = (pm·∇)B → F = ∫ (J·∇)B dV, thus F = (χ/μμ0) ∫ (B·∇)B dV.

Or since B is predominantly along the x-axis,

Fx = (χ/μμ0) ∫ Bx (∂Bx/∂x) S dx = (χS/2μμ0) ∫x=0x=L dBx2 = −χSB2/(2μμ0) ≈ χSB2/(2μ0) in magnitude (μ ≈ 1 for a paramagnetic); the force pulls the rod into the coil.

Teacher's Note: Force on magnetised matter is (J·∇)B; integrating B dB along the rod depends only on end-field values.

Exam Note: Integrate B dB/dx along the rod; take μ ≈ 1.

Question 286. In the arrangement shown in Fig. 3.77 it is possible to measure (by means of a balance) the force with which a paramagnetic ball of volume V = 41 mm3 is attracted to a pole of the electromagnet M. The magnetic induction at the axis of the pole shoe depends on the height x as B = B0 exp(−ax2), where B0 = 1.50 T, a = 100 m-2. Find: (a) at what height xm the ball experiences the maximum attraction; (b) the magnetic susceptibility of the paramagnetic if the maximum attraction force equals Fmax = 160 μN.

Solution. (Fig. 3.77: the ball hangs from one arm of a balance above the pole shoe of the electromagnet M.)

The force in question is F = (pm·∇)B = (χBV/μμ0) dB/dx.

Since B is essentially in the x-direction, Fx = (χV/2μ0) dB2/dx = (χB02V/2μ0) d/dx(e−2ax2) = −4ax e−2ax2 χB02V/(2μ0).

This is maximum when its derivative vanishes, i.e. 16a2x2 − 4a = 0, or xm = 1/√(4a) = 5 cm.

The maximum force is Fmax = 4a (1/√(4a)) e−1/2 χB02V/(2μ0) = (χB02V/μ0)√(a/e).

So, χ = (μ0Fmax√(e/a))/(VB02) = 3.6×10-4.

Teacher's Note: F ∝ x e−2ax² has a single maximum where 4ax² = 1; then solve for χ from Fmax.

Exam Note: Differentiate F(x), set to zero, substitute SI units (mm³ = 10-9 m³).

Question 287. A small ball of volume V made of paramagnetic with susceptibility χ was slowly displaced along the axis of a current-carrying coil from the point where the magnetic induction equals B out to the region where the magnetic field is practically absent. What amount of work was performed during this process?

Solution. Fx = (pm·∇)Bx = (χBV/μμ0) dB/dx ≈ (χV/2μ0) dB2/dx.

This force is attractive and an equal force must be applied for balance. The work done by applied forces is

A = ∫x=0x=L (−Fx) dx = (χV/2μ0)(−B2)|x=0x=L ≈ χVB2/(2μ0).

Teacher's Note: Moving slowly against an attractive force needs external work equal to the energy χVB²/2μ0 of the induced moment.

Exam Note: Integrate −F dx; field is zero at the far end.

Step-by-Step IE Irodov Solutions for JEE Math

Access JEE Mathematics Solutions

Explore reliable mathematical solutions for IE Irodov Solutions Chapter 20 Constant Magnetic Field Magnetics Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.