Download JEE Physics IE Irodov Textbook Solutions: Chapter 21 Electromagnetic Induction Maxwells Equations
Access comprehensive textbook solutions for Chapter 21 Electromagnetic Induction Maxwells Equations using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access IE Irodov Textbook Answers and Solutions
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Electromagnetic Induction. Maxwell's Equations - Questions 331 to 371
Inductance, Magnetic Energy, Displacement Current and Transformation of Fields
Question 331. Two thin concentric wires shaped as circles with radii a and b lie in the same plane. Allowing for a ≪ b, find: (a) their mutual inductance; (b) the magnetic flux through the surface enclosed by the outside wire, when the inside wire carries a current I.
Solution. The direct calculation of the flux Φ2 through the large loop is rather complicated, since the configuration of the field is complicated. The reciprocity theorem simplifies the problem. Let the same current i flow through loop 2 (the outer loop). The magnetic flux it creates through loop 1 (the inner loop) is easily found.
Magnetic induction at the centre of the loop: B = μ0i/(2b).
So the flux through loop 1 is Φ12 = πa²·μ0i/(2b).
From the reciprocity theorem Φ12 = Φ21, so Φ21 = μ0πa²i/(2b).
Hence (a) L12 = Φ21/i = ½ μ0πa²/b, and (b) the flux through the outer wire when the inner carries I is Φ = L12I = μ0πa²I/(2b).
Teacher's Note: Reciprocity: flux of a small loop in a big one equals the reverse, easy to compute.
Exam Note: State L12 = μ0πa²/(2b); then flux = L12I.
Question 332. A small cylindrical magnet M (Fig. 3.95) is placed in the centre of a thin coil of radius a consisting of N turns. The coil is connected to a ballistic galvanometer. The active resistance of the whole circuit is equal to R. Find the magnetic moment of the magnet if its removal from the coil results in a charge q flowing through the galvanometer. (Fig. 3.95 shows a small cylindrical magnet M lying at the centre of a flat circular coil, with the coil leads connected to a galvanometer.)
Solution. Let pm be the magnetic moment of the magnet M. The magnetic field due to this magnet is (μ0/4π) [3(pm·r)r/r5 − pm/r³].
The flux associated with this, when the magnet is along the axis at a distance x from the centre, is Φ = (μ0/4π) ∫ [3(pm·r)r/r5 − pm/r³]·dS = Φ1 − Φ2, where
Φ2 = (μ0/4π) pm ∫0a 2πρ dρ/(x² + ρ²)3/2 = (μ0pm/2)(1/x − 1/√(x² + a²))
and Φ1 = (3μ0pmx²/4π) ∫0a 2πρ dρ/(x² + ρ²)5/2 = (μ0pmx²/2)(1/x³ − 1/(x² + a²)3/2).
So, Φ = μ0pma²/(2(x² + a²)3/2) (the book prints a minus sign; only the magnitude matters here).
When the flux changes, an e.m.f. −N dΦ/dt is induced and a current −(N/R) dΦ/dt flows. The total charge q flowing, as the magnet is removed to infinity from x = 0, is
q = (N/R) Φ(x = 0) = (N/R)·μ0pm/(2a), or pm = 2aqR/(Nμ0).
Teacher's Note: Charge through galvanometer equals N times flux change divided by R.
Exam Note: Final: pm = 2aqR/(Nμ0); state q = NΔΦ/R.
Question 333. Find the approximate formula expressing the mutual inductance of two thin coaxial loops of the same radius a if their centres are separated by a distance l, with l ≫ a.
Solution. If a current I flows in one of the coils, the magnetic field at the centre of the other coil is B = μ0a²I/(2(l² + a²)3/2) ≈ μ0a²I/(2l³), as l ≫ a.
The flux associated with the second coil is then approximately μ0πa⁴I/(2l³). Hence, L12 = μ0πa⁴/(2l³).
Teacher's Note: Far away, the field over the second loop is uniform, so flux = B·πa².
Exam Note: Show the l ≫ a approximation step; answer μ0πa⁴/(2l³).
Question 334. There are two stationary loops with mutual inductance L12. The current in one of the loops starts to be varied as I1 = αt, where α is a constant, t is time. Find the time dependence I2(t) of the current in the other loop whose inductance is L2 and resistance R.
Solution. When the current in one of the loops is I1 = αt, an e.m.f. L12 dI1/dt = L12α is induced in the other loop. Then if the current in the other loop is I2 we must have
L2 dI2/dt + RI2 = L12α.
This familiar equation has the solution I2 = (L12α/R)(1 − e−Rt/L2), which is the required current.
Teacher's Note: Induced e.m.f. L12α drives an L-R circuit, so current grows exponentially.
Exam Note: Write the L-R equation first; marks go for the equation.
Question 335. A coil of inductance L = 2.0 μH and resistance R = 1.0 Ω is connected to a source of constant e.m.f. ℰ = 3.0 V (Fig. 3.96). A resistance R0 = 2.0 Ω is connected in parallel with the coil. Find the amount of heat generated in the coil after the switch Sw is disconnected. The internal resistance of the source is negligible.
Solution. Initially, after a steady current is set up, the currents are i20 = ℰ/R through the coil and i10 = ℰ/R0 through R0.
When the switch is disconnected, the current through R0 changes from i10 (to the right) to i20 (to the left). The current in the inductance cannot change suddenly. We then have the equation L di2/dt + (R + R0)i2 = 0.
This equation has the solution i2 = i20 e−t(R+R0)/L. The heat dissipated in the coil is
Q = ∫0∞ i2² R dt = i20² R ∫0∞ e−2t(R+R0)/L dt = R i20² × L/(2(R + R0)) = Lℰ²/(2R(R + R0)) = 3 μJ.
Teacher's Note: Coil current persists after switch-off and decays through R+R0; only R's share is the heat.
Exam Note: Heat in coil, not total: Q = Lℰ²/(2R(R+R0)).
Question 336. An iron tore supports N = 500 turns. Find the magnetic field energy if a current I = 2.0 A produces a magnetic flux across the tore's cross-section equal to Φ = 1.0 mWb.
Solution. To find the magnetic field energy we recall that the flux varies linearly with current. Thus, when the flux is Φ for current i, we can write Φ = Ai. The total energy enclosed in the field, when the current is I, is
W = ∫ ℰ i dt = ∫ N (dΦ/dt) i dt = ∫ N dΦ i = ∫0I NA i di = ½ NAI² = ½ NΦI.
The characteristic factor ½ appears in this way. Numerically, W = ½ × 500 × 1.0×10−3 × 2.0 = 0.5 J.
Teacher's Note: Linear flux-current relation integrates to the factor one-half.
Exam Note: Numerical value 0.5 J; quote W = ½NΦI.
Question 337. An iron core shaped as a doughnut with round cross-section of radius a = 3.0 cm carries a winding of N = 1000 turns through which a current I = 1.0 A flows. The mean radius of the doughnut is b = 32 cm. Using the plot in Fig. 3.76, find the magnetic energy stored up in the core. A field strength H is supposed to be the same throughout the cross-section and equal to its magnitude in the centre of the cross-section. (Fig. 3.76 is the basic magnetization curve of commercial-purity iron: B in T versus H in kA/m, rising steeply to about 1.0 T near H = 0.1 kA/m and reaching about 1.4 T near H = 0.5 kA/m.)
Solution. We apply the circulation theorem: H·2πb = NI, or H = NI/2πb.
Thus the total energy is W = ½ BH·2πb·πa² = π²a²b BH.
Given N, I, b we know H, and can find B from the B–H curve. Then W can be calculated. Here H = 1000×1.0/(2π×0.32) ≈ 0.5 kA/m, for which the curve gives B ≈ 1.4 T, so W ≈ π²(0.03)²(0.32)(1.4)(500) ≈ 2 J (the value depends on the reading of the graph).
Teacher's Note: Circulation gives H; B read off the magnetization curve; energy is ½BH times volume.
Exam Note: Show H = NI/2πb first, then read B from the graph.
Question 338. A thin ring made of a magnetic has a mean diameter d = 30 cm and supports a winding of N = 800 turns. The cross-sectional area of the ring is equal to S = 5.0 cm². The ring has a cross-cut of width b = 2.0 mm. When the winding carries a certain current, the permeability of the magnetic equals μ = 1400. Neglecting the dissipation of magnetic flux at the gap edges, find: (a) the ratio of magnetic energies in the gap and in the magnetic; (b) the inductance of the system; do it in two ways: using the flux and using the energy of the field.
Solution. From ∮ H·dr = NI: H·πd + (B/μ0)·b = NI (d ≫ b). Also B = μμ0H. Thus H = NI/(πd + μb).
Since B is continuous across the gap, B = μμ0NI/(πd + μb), both in the magnetic and in the gap.
(a) Wgap/Wmagnetic = [(B²/2μ0) S b]/[(B²/2μμ0) S πd] = μb/(πd) ≈ 3.0.
(b) The flux linked is NΦ = N∫B·dS = Nμμ0(NI/(πd + μb))·S = μ0SN²I/(b + πd/μ), so L = μ0SN²/(b + πd/μ) ≈ 0.15 H.
Energy way: total energy = (B²/2μ0)(πd/μ + b)S = ½ (μ0N²S/(b + πd/μ)) I² = ½LI².
The L found in the one way agrees with that found in the other way. Note that, in calculating the flux, we do not consider the field in the gap, since it is not linked to the winding. But the total energy includes that of the gap.
Teacher's Note: Gap and core carry the same B; energy ratio is μb/(πd).
Exam Note: Verify L both ways: flux linkage and ½LI² agree, about 0.15 H.
Question 339. A long cylinder of radius a carrying a uniform surface charge rotates about its axis with an angular velocity ω. Find the magnetic field energy per unit length of the cylinder if the linear charge density equals λ, and μ = 1.
Solution. When the cylinder with a linear charge density λ rotates with circular frequency ω, a surface current density (charge/length × time) of i = λω/2π is set up.
The direction of the surface current is normal to the plane of the paper at a point Q on the surface, and the contribution of this current element to the magnetic field at an interior point P is dB = (μ0/4π) i(e × r)/r³ dS, where e is the direction of the current. In magnitude |e × r| = r, since e is normal to r.
The component dB∥ cancels out by cylindrical symmetry. The component that survives is
|B⊥| = (μ0/4π) ∫ i dS cos θ/r² = (μ0i/4π) ∫ dΩ = μ0i,
where we have used dS cos θ/r² = dΩ and ∫dΩ = 4π, the total solid angle around any point. The magnetic field vanishes outside the cylinder by a similar argument.
The total energy per unit length of the cylinder is
W1 = ½ μ0² (λω/2π)² × πa²/μ0 = (μ0/8π) a²λ²ω².
Teacher's Note: Rotating charged shell acts as a solenoid: B = μ0i inside, zero outside.
Exam Note: Energy per length = (B²/2μ0)πa²; field only inside.
Question 340. At what magnitude of the electric field strength in vacuum the volume energy density of this field is the same as that of the magnetic field with induction B = 1.0 T (also in vacuum).
Solution. wE = ½ε0E² for the electric field, wB = B²/(2μ0) for the magnetic field. Thus B²/(2μ0) = ½ε0E², so E = B/√(ε0μ0) = 3×108 V/m when B = 1.0 T.
Teacher's Note: Equate energy densities; E = cB.
Exam Note: Answer 3×108 V/m, i.e. E = cB.
Question 341. A thin uniformly charged ring of radius a = 10 cm rotates about its axis with an angular velocity ω = 100 rad/s. Find the ratio of volume energy densities of magnetic and electric fields on the axis of the ring at a point removed from its centre by a distance l = a.
Solution. The electric field at P is EP = ql/(4πε0(a² + l²)3/2).
To get the magnetic field, note that the rotating ring constitutes a current i = qω/2π, and the corresponding magnetic field at P is BP = μ0a²i/(2(a² + l²)3/2).
Thus wE/wM = ε0μ0E²/B² = ε0μ0(ql × 2/(4πε0μ0a²i))² = (1/ε0μ0)(l/(a²ω))²,
or wM/wE = ε0μ0ω²a⁴/l². For l = a this is ε0μ0ω²a² = (ωa/c)² = (10/3×108)² ≈ 1.1×10−15.
Teacher's Note: Ring gives E from charge and B from equivalent current qω/2π; compare energy densities.
Exam Note: Ratio = (ωa²/cl)², tiny because ωa ≪ c; give numeric.
Question 342. Using the expression for volume density of magnetic energy, demonstrate that the amount of work contributed to magnetization of a unit volume of para- or diamagnetic, is equal to A = −JB/2.
Solution. The total energy of the magnetic field is
½ ∫ (B·H) dV = ½ ∫ B·(B/μ0 − J) dV = (1/2μ0) ∫ B·B dV − ½ ∫ J·B dV.
The second term can be interpreted as the energy of magnetization, and has the density −½ J·B.
Teacher's Note: Use H = B/μ0 − J; the J-term is the magnetization energy.
Exam Note: Start from w = ½B·H and split H; interpret second term.
Question 343. Two identical coils, each of inductance L, are interconnected (a) in series, (b) in parallel. Assuming the mutual inductance of the coils to be negligible, find the inductance of the system in both cases.
Solution. (a) In series, the current I flows through both coils, and the total e.m.f. induced, when the current changes, is −2L dI/dt = −L′ dI/dt, or L′ = 2L.
(b) In parallel, the current flowing through either coil is I/2 and the e.m.f. induced is −L(½ dI/dt). Equating this to −L′ dI/dt, we find L′ = ½L.
Teacher's Note: Series: e.m.f.s add; parallel: current splits equally, same e.m.f.
Exam Note: Answers 2L and L/2; state M = 0 assumption.
Question 344. Two solenoids of equal length and almost equal cross-sectional area are fully inserted into one another. Find their mutual inductance if their inductances are equal to L1 and L2.
Solution. We use L1 = μ0n1²V, L2 = μ0n2²V. So, L12 = μ0n1n2V = √(L1L2).
Teacher's Note: Complete flux linkage (k = 1) gives mutual inductance as geometric mean.
Exam Note: Quote L12 = √(L1L2) with the coupling condition.
Question 345. Demonstrate that the magnetic energy of interaction of two current-carrying loops located in vacuum can be represented as Wint = (1/μ0) ∫ B1B2 dV, where B1 and B2 are the magnetic inductions within a volume element dV, produced individually by the currents of the first and the second loop respectively.
Solution. The interaction energy is the total energy minus the self-energies:
(1/2μ0) ∫ |B1 + B2|² dV − (1/2μ0) ∫ |B1|² dV − (1/2μ0) ∫ |B2|² dV = (1/μ0) ∫ B1·B2 dV.
Here B1 is the magnetic field produced by the first current-carrying loop and B2 that of the second one, so the field due to both loops is B1 + B2.
Teacher's Note: Expand |B1+B2|² and subtract the two self-energies; the cross term remains.
Exam Note: Show the subtraction explicitly; the factor 2 cancels with the cross term.
Question 346. Find the interaction energy of two loops carrying currents I1 and I2 if both loops are shaped as circles of radii a and b, with a ≪ b. The loops' centres are located at the same point and their planes form an angle θ between them.
Solution. We can think of the smaller coil as a magnet of dipole moment pm = πa²I1. Its direction is normal to the loop and makes an angle θ with the direction of the magnetic field due to the bigger loop. This field is B2 = μ0I2/(2b).
The interaction energy has the magnitude |W| = (μ0I1I2/2b) πa² cos θ. Its sign depends on the sense of the currents.
Teacher's Note: Treat the small loop as a dipole in the field at the big loop's centre.
Exam Note: Write W = −pm·B form; angle is between normals.
Question 347. The space between two concentric metallic spheres is filled up with a uniform poorly conducting medium of resistivity ρ and permittivity ε. At the moment t = 0 the inside sphere obtains a certain charge. Find: (a) the relation between the vectors of displacement current density and conduction current density at an arbitrary point of the medium at the same moment of time; (b) the displacement current across an arbitrary closed surface wholly located in the medium and enclosing the internal sphere, if at the given moment of time the charge of that sphere is equal to q.
Solution. (a) There is a radial outward conduction current. Let Q be the instantaneous charge on the inner sphere; then
j × 4πr² = −dQ/dt, or j = −(1/4πr²)(dQ/dt) r̂.
On the other hand, jd = ∂D/∂t = (d/dt)(Q/4πr² r̂) = (1/4πr²)(dQ/dt) r̂ = −j.
(b) At the given moment, E = q/(4πε0εr²) r̂, and by Ohm's law j = E/ρ = q/(4πε0ερr²) r̂.
Then jd = −q/(4πε0ερr²) r̂, and
∮ jd·dS = −(q/4πε0ερ) ∫ dS cos θ / r² = −q/(ε0ερ).
The surface integral is negative because jd, being opposite to j, is inward.
Teacher's Note: Charge leaks out as conduction current; displacement current exactly cancels it.
Exam Note: Answer (b): Id = −q/(ε0ερ), inward; state sign.
Question 348. A parallel-plate capacitor is formed by two discs with a uniform poorly conducting medium between them. The capacitor was initially charged and then disconnected from a voltage source. Neglecting the edge effects, show that there is no magnetic field between capacitor plates.
Solution. Here also, neglecting edge effects, jd = −j. Thus Maxwell's equations reduce to div B = 0, curl H = 0, B = μH.
A general solution of these equations is B = constant = B0, where B0 can be thought of as an extraneous magnetic field. If it is zero, B = 0.
Teacher's Note: Total current (conduction + displacement) vanishes, so curl H = 0 and H = 0.
Exam Note: Link jd = −j to curl H = 0 explicitly.
Question 349. A parallel-plate air condenser whose each plate has an area S = 100 cm² is connected in series to an ac circuit. Find the electric field strength amplitude in the capacitor if the sinusoidal current amplitude in lead wires is equal to Im = 1.0 mA and the current frequency equals ω = 1.6·107 s−1.
Solution. Given I = Im sin ωt. We see that
j = (Im/S) sin ωt = −jd = −∂D/∂t, or D = (Im/ωS) cos ωt, so Em = Im/(ε0ωS)
is the amplitude of the electric field and is 7 V/cm.
Teacher's Note: Displacement current density in the gap equals lead-wire conduction current density.
Exam Note: Check: 10−3/(8.85×10−12×1.6×107×10−2) ≈ 706 V/m = 7 V/cm.
Question 350. The space between the electrodes of a parallel-plate capacitor is filled with a uniform poorly conducting medium of conductivity σ and permittivity ε. The capacitor plates shaped as round discs are separated by a distance d. Neglecting the edge effects, find the magnetic field strength between the plates at a distance r from their axis if an ac voltage V = Vm cos ωt is applied to the capacitor.
Solution. The electric field between the plates can be written as E = Re (Vm/d) eiωt, instead of (Vm/d) cos ωt.
This gives rise to a conduction current jc = σE = Re (σ/d) Vm eiωt, and a displacement current jd = ∂D/∂t = Re ε0ε iω (Vm/d) eiωt.
The total current is jT = (Vm/d) √(σ² + (ε0εω)²) cos (ωt + α), where tan α = σ/(ε0εω), on taking the real part of the resultant.
The corresponding magnetic field is obtained by using the circulation theorem, H·2πr = πr²jT, or H = Hm cos (ωt + α), where
Hm = (rVm/2d) √(σ² + (ε0εω)²).
Teacher's Note: Conduction and displacement currents are 90° apart; add in quadrature, then apply circulation.
Exam Note: Give Hm and phase α with tan α = σ/(ε0εω).
Question 351. A long straight solenoid has n turns per unit length. An alternating current I = Im sin ωt flows through it. Find the displacement current density as a function of the distance r from the solenoid axis. The cross-sectional radius of the solenoid equals R.
Solution. Inside the solenoid there is a magnetic field B = μ0nIm sin ωt. Since this varies in time there is an associated electric field, obtained by using ∮C E·dr = −(d/dt) ∫S B·dS.
For r < R: 2πrE = −Ḃ·πr², or E = −Ḃr/2.
For r > R: E = −ḂR²/(2r).
The associated displacement current density is jd = ε0 ∂E/∂t, that is
jd = −ε0B̈ r/2 for r < R, and jd = −ε0B̈ R²/(2r) for r > R,
where B̈ = −ω²μ0nIm sin ωt. The answer given in the book is dimensionally incorrect without the factor ε0.
Teacher's Note: Changing B induces E; displacement current is ε0 times dE/dt, nonzero even outside.
Exam Note: Do not omit ε0; give both regions r<R and r>R.
Question 352. A point charge q moves with a non-relativistic velocity v = const. Find the displacement current density jd at a point located at a distance r from the charge on a straight line (a) coinciding with the charge path; (b) perpendicular to the path and passing through the charge.
Solution. In the non-relativistic limit, E = qr/(4πε0r³).
(a) On a straight line coinciding with the charge path,
jd = ε0 ∂E/∂t = (q/4π) [−v/r³ − 3rṙ/r⁴] (using dr/dt = −v).
But in this case ṙ = −v and vr/r = v, so jd = 2qv/(4πr³).
(b) In this case ṙ = 0, as r ⊥ v. Thus jd = −qv/(4πr³).
Teacher's Note: Differentiate Coulomb field with moving source; radial rate ṙ differs along and across path.
Exam Note: Answers 2qv/(4πr³) along path, −qv/(4πr³) perpendicular.
Question 353. A thin wire ring of radius a carrying a charge q approaches the observation point P so that its centre moves rectilinearly with a constant velocity v. The plane of the ring remains perpendicular to the motion direction. At what distance xm from the point P will the ring be located at the moment when the displacement current density at the point P becomes maximum? What is the magnitude of this maximum density?
Solution. We have EP = qx/(4πε0(a² + x²)3/2). Then
jd = ∂D/∂t = ε0 ∂E/∂t = (qv/(4π(a² + x²)5/2)) (a² − 2x²) in magnitude.
This is maximum when x = xm = 0, and has a smaller extremum at some other value. The maximum density is jd,max = qv/(4πa³).
To check this we calculate ∂jd/∂x = (qv/4π)[−4x(a² + x²) − 5x(a² − 2x²)]/(a² + x²)7/2. This vanishes for x = 0 and for x = √(3/2) a. The latter is easily shown to be a smaller local extremum (negative maximum).
Teacher's Note: Differentiate E on axis with respect to x; x = 0 gives the largest magnitude.
Exam Note: Maximum at x = 0; other extremum is smaller.
Question 354. A point charge q moves with a non-relativistic velocity v = const. Applying the theorem for the circulation of the vector H around the dotted circle shown in Fig. 3.97, find H at the point A as a function of a radius vector r and velocity v of the charge. (Fig. 3.97: the charge q moves with velocity v along the axis of a dotted circle; A is a point on the circle, r is the radius vector from q to A, and θ is the angle between r and v.)
Solution. We use Maxwell's equations in the form ∮ B·dr = ε0μ0 (∂/∂t) ∫ E·dS, since the conduction current vanishes at the site.
We know that ∫ E·dS = (q/4πε0) ∫ dS·r̂/r² = (q/4πε0) ∫ dΩ = (q/4πε0) 2π(1 − cos θ), where 2π(1 − cos θ) is the solid angle formed by the disc-like surface at the charge.
Thus ∮ B·dr = 2πaB = ½ μ0q sin θ · θ̇.
On the other hand x = a cot θ. Differentiating and using dx/dt = −v, v = a cosec²θ θ̇.
Thus B = μ0qv sin θ/(4πr²), which can be written as B = μ0q(v × r)/(4πr³), and H = (q/4π)(v × r)/r³. (The sense has to be checked independently.)
Teacher's Note: Circulation of B equals rate of change of electric flux through the disc (solid angle).
Exam Note: Final: H = q(v×r)/(4πr³), Biot–Savart form for a moving charge.
Question 355. Using Maxwell's equations, show that (a) a time-dependent magnetic field cannot exist without an electric field; (b) a uniform electric field cannot exist in the presence of a time dependent magnetic field; (c) inside an empty cavity a uniform electric (or magnetic) field can be time-dependent.
Solution. (a) If B = B(t), then curl E = −∂B/∂t ≠ 0. So E cannot vanish.
(b) Here also curl E ≠ 0, so E cannot be uniform.
(c) Suppose for instance E = af(t), where a is a spatially and temporally fixed vector. Then −∂B/∂t = curl E = 0. Generally speaking this contradicts the other equation curl H = ∂D/∂t ≠ 0, for in this case the left hand side is time independent but the right hand side depends on time. The only exception is when f(t) is a linear function. Then a uniform field E can be time dependent.
Teacher's Note: Faraday's law forces curl E ≠ 0 whenever B changes; use curl of both equations.
Exam Note: Quote both curl equations for each part.
Question 356. Demonstrate that the law of electric charge conservation, i.e. ∇·j = −∂ρ/∂t, follows from Maxwell's equations.
Solution. From the equation curl H − ∂D/∂t = j, we get on taking divergence of both sides −(∂/∂t) div D = div j (since div curl H = 0).
But div D = ρ and hence div j + ∂ρ/∂t = 0.
Teacher's Note: Divergence of a curl is zero; Gauss's law replaces div D by charge density.
Exam Note: Use div(curl H) = 0, then div D = ρ.
Question 357. Demonstrate that Maxwell's equations ∇×E = −∂B/∂t and ∇·B = 0 are compatible, i.e. the first one does not contradict the second one.
Solution. From ∇×E = −∂B/∂t we get on taking divergence 0 = −(∂/∂t) div B. This is compatible with div B = 0.
Teacher's Note: Divergence of a curl vanishes, so div B stays constant in time.
Exam Note: State div(curl E) = 0 gives ∂(div B)/∂t = 0.
Question 358. In a certain region of the inertial reference frame there is magnetic field with induction B rotating with angular velocity ω. Find ∇×E in this region as a function of vectors ω and B.
Solution. A rotating magnetic field can be represented by Bx = B0 cos ωt, By = B0 sin ωt and Bz = Bz0. Then curl E = −∂B/∂t. So
−(curl E)x = −ωB0 sin ωt = −ωBy, −(curl E)y = ωB0 cos ωt = ωBx and (curl E)z = 0.
Hence curl E = −ω × B, where ω = e3ω.
Teacher's Note: Rotating B has ∂B/∂t = ω×B; Faraday's law then gives curl E.
Exam Note: Answer curl E = −ω×B; show components for the rotating field.
Question 359. In the inertial reference frame K there is a uniform magnetic field with induction B. Find the electric field strength in the frame K′ which moves relative to the frame K with a non-relativistic velocity v, with v ⊥ B. To solve this problem, consider the forces acting on an imaginary charge in both reference frames at the moment when the velocity of the charge in the frame K′ is equal to zero.
Solution. Consider a particle with charge e moving with velocity v in frame K. It experiences a force F = ev × B.
In the frame K′, moving with velocity v relative to K, the particle is at rest. This means that there must be an electric field E′ in K′, so that the particle experiences a force F′ = eE′ = F = ev × B.
Thus E′ = v × B.
Teacher's Note: Charge at rest in K′ feels the same force, so E′ must equal v×B.
Exam Note: Force is frame-independent at low speed: E′ = v×B.
Question 360. A large plate of non-ferromagnetic material moves with a constant velocity v = 90 cm/s in a uniform magnetic field with induction B = 50 mT as shown in Fig. 3.98. Find the surface density of electric charges appearing on the plate as a result of its motion. (Fig. 3.98: the plate moves to the right with velocity v while B points upward, in the plane of the plate.)
Solution. Within the plate, there will appear a (v × B) force, which will cause charges inside the plate to drift, until a countervailing electric field is set up. This electric field is related by E = vB, since v and B are mutually perpendicular, and E is perpendicular to both. The charge density ±σ, on the faces of the plate, producing this electric field, is given by
E = σ/ε0, or σ = ε0vB = 0.40 pC/m².
Teacher's Note: Charges separate until the electric force cancels the magnetic force; field of two faces gives σ.
Exam Note: σ = ε0vB ≈ 0.40 pC/m²; check: 8.85×10−12×0.9×0.05.
Question 361. A long solid aluminum cylinder of radius a = 5.0 cm rotates about its axis in a uniform magnetic field with induction B = 10 mT. The angular velocity of rotation equals ω = 45 rad/s, with ω ↑↑ B. Neglecting the magnetic field of appearing charges, find their space and surface densities.
Solution. Choose ω ↑↑ B along the z-axis, and choose r as the cylindrical polar radius vector of a reference point (perpendicular distance from the axis). This point has the velocity v = ω × r, and experiences a (v × B) force, which must be counterbalanced by an electric field,
E = −(ω × r) × B = −(ω·B)r.
There must appear a space charge density ρ = ε0 div E = −2ε0 ω·B = −8 pC/m³.
Since the cylinder as a whole is electrically neutral, the surface of the cylinder must acquire a positive charge of surface density σ = +2ε0(ω·B)πa²/(2πa) = ε0a ω·B = +0.2 pC/m².
Teacher's Note: Electric field cancels v×B inside metal; div E gives bulk charge, neutrality gives surface charge.
Exam Note: Check numbers: ρ = −2ε0ωB, σ = ε0aωB; signs opposite.
Question 362. A non-relativistic point charge q moves with a constant velocity v. Using the field transformation formulas, find the magnetic induction B produced by this charge at the point whose position relative to the charge is determined by the radius vector r.
Solution. In the reference frame K′, moving with the particle,
E′ = E + v0 × B = qr/(4πε0r³), B′ = B − v0 × E/c² = 0.
Here v0 is the velocity of K′ relative to the K frame, in which the particle has velocity v. Clearly, v0 = v. From the second equation,
B = v × E/c² = ε0μ0 × (q/4πε0)(v × r)/r³ = (μ0/4π) q(v × r)/r³.
Teacher's Note: In the charge's rest frame B′ = 0; transforming back gives B = v×E/c².
Exam Note: Result is the Biot–Savart law for a moving point charge.
Question 363. Using Eqs. (3.6h), demonstrate that if in the inertial reference frame K there is only electric or only magnetic field, in any other inertial frame K′ both electric and magnetic fields will coexist simultaneously, with E′ ⊥ B′.
Solution. Suppose there is only an electric field E in K. Then in K′, considering non-relativistic velocity v, E′ = E, B′ = −v × E/c². So E′·B′ = 0.
In the relativistic case, E′∥ = E∥, E′⊥ = E⊥/√(1 − v²/c²), B′∥ = B∥ = 0, B′⊥ = (−v × E/c²)/√(1 − v²/c²).
Now E′·B′ = E′∥·B′∥ + E′⊥·B′⊥ = 0, since E′⊥·B′⊥ = −E⊥·(v × E)/(1 − v²/c²) = −E⊥·(v × E⊥)/(1 − v²/c²) = 0.
Teacher's Note: B′ = −v×E/c² is perpendicular to E′ because a cross product is perpendicular to its factors.
Exam Note: Show both fields appear and E′·B′ = 0.
Question 364. In an inertial reference frame K there is only magnetic field with induction B = b(yi − xj)/(x² + y²), where b is a constant, i and j are the unit vectors of the x and y axes. Find the electric field strength E′ in the frame K′ moving relative to the frame K with a constant non-relativistic velocity v = vk; k is the unit vector of the z axis. The z′ axis is assumed to coincide with the z axis. What is the shape of the field E′?
Solution. In K, B = b(yi − xj)/(x² + y²), b = constant. In K′, E′ = v × B = bv(xi + yj)/(x² + y²) = bvr/r².
The electric field is radial (r = xi + yj).
Teacher's Note: Use E′ = v×B with k×i = j and k×j = −i.
Exam Note: Answer: radial field bv r/r², directed from the z-axis.
Question 365. In an inertial reference frame K there is only electric field of strength E = a(xi + yj)/(x² + y²), where a is a constant, i and j are the unit vectors of the x and y axes. Find the magnetic induction B′ in the frame K′ moving relative to the frame K with a constant non-relativistic velocity v = vk; k is the unit vector of the z axis. The z′ axis is assumed to coincide with the z axis. What is the shape of the magnetic induction B′?
Solution. In K, E = ar/r², r = xi + yj. In K′, B′ = −v × E/c² = ar × v/(c²r²).
The magnetic lines are circular.
Teacher's Note: B′ = −v×E/c² is perpendicular to both r and z, hence azimuthal.
Exam Note: Lines of B′ are circles about the z-axis.
Question 366. Demonstrate that the transformation formulas (3.6h) follow from the formulas (3.6i) at v0 ≪ c.
Solution. In the non-relativistic limit, we neglect v²/c² and write
E′∥ = E∥, E′⊥ = E⊥ + v × B, B′∥ = B∥, B′⊥ = B⊥ − v × E/c².
These equations can be combined to give E′ = E + v × B, B′ = B − v × E/c².
Teacher's Note: Set √(1−v²/c²) = 1 and note v×B is purely perpendicular.
Exam Note: Combine parallel and perpendicular parts into vector form.
Question 367. In an inertial reference frame K there is only a uniform electric field E = 8 kV/m in strength. Find the modulus and direction (a) of the vector E′, (b) of the vector B′ in the inertial reference frame K′ moving with a constant velocity v relative to the frame K at an angle α = 45° to the vector E. The velocity of the frame K′ is equal to a β = 0.60 fraction of the velocity of light.
Solution. Choose E in the direction of the z-axis, E = (0, 0, E). The frame K′ is moving with velocity v = (v sin α, 0, v cos α) in the x–z plane. Then in the frame K′, E′∥ = E∥, B′∥ = 0, E′⊥ = E⊥/√(1 − v²/c²), B′⊥ = (−v × E/c²)/√(1 − v²/c²).
The vector along v is e = (sin α, 0, cos α) and the perpendicular vector in the x–z plane is f = (−cos α, 0, sin α).
(a) Thus using E = E cos α e + E sin α f: E′∥ = E cos α and E′⊥ = E sin α/√(1 − v²/c²). So
E′ = E √((1 − β²cos²α)/(1 − β²)) and tan α′ = tan α/√(1 − β²).
(b) B′∥ = 0, B′⊥ = (v × E/c²)/√(1 − v²/c²) in magnitude, i.e. B′ = βE sin α/(c√(1 − β²)).
Numerically, E′ ≈ 9.1 kV/m with α′ ≈ 51°, and B′ ≈ 14 μT.
Teacher's Note: Split E into components along and across v; only the perpendicular part is boosted.
Exam Note: Give E′ ≈ 9.1 kV/m, α′ ≈ 51°, B′ ≈ 14 μT.
Question 368. Solve a problem differing from the foregoing one by a magnetic field with induction B = 0.8 T replacing the electric field.
Solution. Choose B in the z direction, and the velocity v = (v sin α, 0, v cos α) in the x–z plane. Then in the K′ frame, E′∥ = E∥ = 0, E′⊥ = (v × B)/√(1 − v²/c²), B′∥ = B∥, B′⊥ = B⊥/√(1 − v²/c²).
We find similarly E′ = cβB sin α/√(1 − β²), B′ = B √((1 − β²cos²α)/(1 − β²)), tan α′ = tan α/√(1 − β²).
Numerically, E′ ≈ 1.3×108 V/m, B′ ≈ 0.91 T, α′ ≈ 51°.
Teacher's Note: Same transformation with roles swapped: now E′ is generated by v×B.
Exam Note: Numerical: E′ ≈ 1.3×108 V/m; B′ ≈ 0.91 T.
Question 369. Electromagnetic field has two invariant quantities. Using the transformation formulas (3.6i), demonstrate that these quantities are (a) EB; (b) E² − c²B².
Solution. (a) We see that E′·B′ = E′∥·B′∥ + E′⊥·B′⊥
= E∥·B∥ + [(E⊥ + v × B)·(B⊥ − v × E/c²)]/(1 − v²/c²)
= E∥·B∥ + [E⊥·B⊥ − (v × B⊥)·(v × E⊥)/c²]/(1 − v²/c²)
(the cross terms vanish, since E⊥·(v × E) = 0 and (v × B)·B⊥ = 0). But (A × B)·(C × D) = (A·C)(B·D) − (A·D)(B·C), so (v × B⊥)·(v × E⊥) = v² E⊥·B⊥. Hence
E′·B′ = E∥·B∥ + E⊥·B⊥(1 − v²/c²)/(1 − v²/c²) = E·B.
(b) E′² − c²B′² = E′∥² − c²B′∥² + E′⊥² − c²B′⊥²
= E∥² − c²B∥² + [(E⊥ + v × B)² − c²(B⊥ − v × E/c²)²]/(1 − v²/c²)
= E∥² − c²B∥² + [E⊥² − c²B⊥² + (v × B⊥)² − (v × E⊥)²/c²]/(1 − v²/c²)
= E∥² − c²B∥² + (1/(1 − v²/c²)) [E⊥² − c²B⊥²](1 − v²/c²) = E² − c²B²,
since (v × A⊥)² = v²A⊥².
Teacher's Note: Substitute the transformation laws; cross terms cancel and v² factors cancel the Lorentz factor.
Exam Note: Key identity: (v×A⊥)² = v²A⊥²; show both invariants.
Question 370. In an inertial reference frame K there are two uniform mutually perpendicular fields: an electric field of strength E = 40 kV/m and a magnetic field induction B = 0.20 mT. Find the electric strength E′ (or the magnetic induction B′) in the reference frame K′ where only one field, electric or magnetic, is observed. Instruction. Make use of the field invariants cited in the foregoing problem.
Solution. In this case, E·B = 0, as the fields are mutually perpendicular. Also, E² − c²B² = −20×108 (V/m)², which is negative.
Thus, we can find a frame in which E′ = 0, and
B′ = (1/c)√(c²B² − E²) = B √(1 − E²/(c²B²)) = 0.20 √(1 − (4×104/(3×108 × 2×10−4))²) = 0.15 mT.
Teacher's Note: Both invariants fix the surviving field: E·B = 0 and E² − c²B² < 0 leave only B′.
Exam Note: Negative E² − c²B² leaves only B′ ≈ 0.15 mT.
Question 371. A point charge q moves uniformly and rectilinearly with a relativistic velocity equal to a β fraction of the velocity of light (β = v/c). Find the electric field strength E produced by the charge at the point whose radius vector relative to the charge is equal to r and forms an angle θ with its velocity vector.
Solution. Suppose the charge q moves in the positive direction of the x-axis of the frame K. Let us go over to the moving frame K′, at whose origin the charge is at rest. We take the x and x′ axes of the two frames to be coincident, and the y and y′ axes to be parallel.
In the K′ frame, E′ = (1/4πε0) qr′/r′³, and this has the components E′x = (1/4πε0) qx′/r′³, E′y = (1/4πε0) qy′/r′³.
Now let us go back to the frame K. At the moment when the origins of the two frames coincide, we take t = 0. Then x = r cos θ = x′√(1 − v²/c²), y = r sin θ = y′. Also Ex = E′x, Ey = E′y/√(1 − v²/c²).
From these equations r′² = r²(1 − β² sin²θ)/(1 − β²), and
E = (q/4πε0) (1/(r³(1 − β² sin²θ)3/2)) [(1 − β²)3/2 (x′i + (y′/√(1 − β²)) j)] = qr(1 − β²)/(4πε0r³(1 − β² sin²θ)3/2).
Teacher's Note: Go to the charge's rest frame (Coulomb field), then transform; Lorentz contraction brings the sin²θ term.
Exam Note: Final: E = q r(1−β²)/[4πε0r³(1−β²sin²θ)3/2], radial.
Download IE Irodov Solutions for JEE Math PDF
Complete Math Solutions for IE Irodov Solutions Chapter 21 Electromagnetic Induction Maxwells Equations Part 2
Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 21 Electromagnetic Induction Maxwells Equations Part 2. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Mastering Core Concepts with IE Irodov Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for JEE Math
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.