Step-by-Step IE Irodov Solutions for JEE Physics Chapter 22 Motion Of Charged Particles In Electric And Magne
Explore reliable textbook solutions for Chapter 22 Motion Of Charged Particles In Electric And Magne tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Download Chapter 22 Motion Of Charged Particles In Electric And Magne Textbook Solutions PDF
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Motion Of Charged Particles In Electric And Magnetic Fields - Questions 372 to 407
Motion Of Charged Particles In Electric & Magnetic Fields (Part 1)
Question 372. At the moment t = 0 an electron leaves one plate of a parallel-plate capacitor with a negligible velocity. An accelerating voltage, varying as V = at, where a = 100 V/s, is applied between the plates. The separation between the plates is l = 5.0 cm. What is the velocity of the electron at the moment it reaches the opposite plate?
Solution.
Let the electron leave the negative plate at t = 0. The field between the plates is E = φ/l = at/l.
Acceleration of the electron: w = eE/m = eat/(ml), i.e. dv/dt = eat/(ml).
Integrating, ∫0v dv = (ea/ml) ∫0t t dt, so v = (1/2)(ea/ml) t2 (1)
The distance covered is s = ∫ v dt, so l = (1/2)(ea/ml) ∫0t t2 dt = ea t3/(6ml), giving t = (6ml2/ea)1/3.
Putting t in (1): v = (1/2)(ea/ml)(6ml2/ea)2/3 = (9ale/(2m))1/3 = 16 km/s.
Teacher's Note: Voltage grows linearly, so acceleration grows with t: integrate twice, eliminate t using the gap length l.
Exam Note: Show both integrations and substitute numbers.
Question 373. A proton accelerated by a potential difference V gets into the uniform electric field of a parallel-plate capacitor whose plates extend over a length l in the motion direction. The field strength varies with time as E = at, where a is a constant. Assuming the proton to be non-relativistic, find the angle between the motion directions of the proton before and after its flight through the capacitor; the proton gets in the field at the moment t = 0. The edge effects are to be neglected.
Solution.
The field inside the capacitor is E = at, so the force on the proton is F = eat and its acceleration is w = eat/m.
If t is the time spent between the plates, then t = l/v∥, since no acceleration acts along the plates (v∥ is the velocity along the length of the plate).
Perpendicular to the plates, dv⊥/dt = w, and the initial v⊥ is zero, so v⊥ = ∫0t (eat/m) dt = ea t2/(2m) = (ea/2m)(l2/v∥2).
Hence tan α = v⊥/v∥ = e a l2/(2m v∥3).
From energy conservation v∥ = (2eV/m)1/2, so
tan α = e a l2 / [2m (2eV/m)3/2] = (a l2/4) √(m/(2eV3)).
Teacher's Note: Along the plates speed is constant, so time = l/v; the transverse velocity comes from integrating the time-varying force.
Exam Note: Find v from V first, then tan α.
Question 374. A particle with specific charge q/m moves rectilinearly due to an electric field E = E0 − ax, where a is a positive constant, x is the distance from the point where the particle was initially at rest. Find: (a) the distance covered by the particle till the moment it came to a standstill; (b) the acceleration of the particle at that moment.
Solution.
The equation of motion is dv/dt = v dv/dx = (q/m)(E0 − ax).
Integrating, (1/2)v2 − (q/m)(E0x − (1/2)ax2) = constant. Initially v = 0 at x = 0, so the constant is 0.
Thus v2 = (2q/m)(E0x − (1/2)ax2).
(a) v = 0 again at x = xm = 2E0/a.
(b) The corresponding acceleration is (dv/dt) at xm = (q/m)(E0 − 2E0) = −qE0/m.
Teacher's Note: Write a = v dv/dx and integrate; stops where v² returns to zero. Acceleration there is negative (reverses).
Exam Note: Quote both x = 2E₀/a and the minus sign.
Question 375. An electron starts moving in a uniform electric field of strength E = 10 kV/cm. How soon after the start will the kinetic energy of the electron become equal to its rest energy?
Solution.
From the law of relativistic conservation of energy, m0c2/√(1 − v2/c2) − eEx = m0c2, as the electron is at rest (v = 0 for x = 0) initially. Thus clearly T = eEx.
On the other hand, √(1 − v2/c2) = m0c2/(m0c2 + eEx), or
v/c = √[(m0c2 + eEx)2 − m02c4] / (m0c2 + eEx).
Then ct = ∫ c dt = ∫ (m0c2 + eEx) dx / √[(m0c2 + eEx)2 − m02c4] = (1/eE) √[(m0c2 + eEx)2 − m02c4] + constant.
The constant is 0, since x = 0 at t = 0. So ct = (1/eE) √[(m0c2 + eEx)2 − m02c4].
Finally, using T = eEx: c eE t0 = √(T(T + 2m0c2)), or t0 = √(T(T + 2m0c2)) / (eEc).
For T = m0c2: t0 = √3 m0c/(eE) ≈ 3 ns (E = 106 V/m).
Teacher's Note: Relativistic motion in constant force: T = eEx, then integrate dx/v. Set T = m₀c² at the end.
Exam Note: Substitute T = m₀c² and E in V/m.
Question 376. Determine the acceleration of a relativistic electron moving along a uniform electric field of strength E at the moment when its kinetic energy becomes equal to T.
Solution.
As before, T = eEx. In linear motion,
d/dt [m0v/√(1 − v2/c2)] = m0w/√(1 − v2/c2) + (m0w/(1 − v2/c2)3/2)(v2/c2) = m0w/(1 − v2/c2)3/2 = [(T + m0c2)3/(m02c6)] w = eE.
So w = eE m02c6/(T + m0c2)3 = (eE/m0)(1 + T/(m0c2))−3.
Teacher's Note: Force equals d(momentum)/dt; in linear motion this gives m₀γ³w = eE, so acceleration falls as γ⁻³.
Exam Note: State w = (eE/m₀)γ⁻³ with γ = 1 + T/m₀c².
Question 377. At the moment t = 0 a relativistic proton flies with a velocity v0 into the region where there is a uniform transverse electric field of strength E, with v0 ⊥ E. Find the time dependence of (a) the angle θ between the proton's velocity vector v and the initial direction of its motion; (b) the projection vx of the vector v on the initial direction of motion.
Solution.
Take x along v0 and y along E. The equations are d/dt[m0vx/√(1 − v2/c2)] = 0 and d/dt[m0vy/√(1 − v2/c2)] = eE.
Hence vx/√(1 − v2/c2) = constant = v0/√(1 − v02/c2).
Energy conservation: m0c2/√(1 − v2/c2) = m0c2/√(1 − v02/c2) + eEy.
Dividing, vx = v0ε0/(ε0 + eEy), where ε0 = m0c2/√(1 − v02/c2).
Also m0/√(1 − v2/c2) = (ε0 + eEy)/c2. Thus (ε0 + eEy)vy = c2eEt + constant, and the constant is 0 as vy = 0 at t = 0.
Integrating again, ε0y + (1/2)eEy2 = (1/2)c2eEt2 + constant, with constant = 0 (y = 0 at t = 0). Thus (ceEt)2 = (eEy)2 + 2ε0eEy, i.e. (ceEt)2 = (ε0 + eEy)2 − ε02, or ε0 + eEy = √(ε02 + c2e2E2t2).
Hence (b) vx = v0ε0/√(ε02 + c2e2E2t2), and also vy = c2eEt/√(ε02 + c2e2E2t2).
(a) tan θ = vy/vx = (eEt/(m0v0)) √(1 − v02/c2).
Teacher's Note: Transverse field leaves relativistic x-momentum unchanged; energy gain eEy ties y to time.
Exam Note: Give both v_x(t) and tan θ(t).
Question 378. A proton accelerated by a potential difference V = 500 kV flies through a uniform transverse magnetic field with induction B = 0.51 T. The field occupies a region of space d = 10 cm in thickness (Fig. 3.99). Find the angle α through which the proton deviates from the initial direction of its motion.
Solution.
From the figure, sin α = d/R = dqB/(mv), as the radius of the arc is R = mv/(qB), where v is the velocity of the particle when it enters the field.
From the initial condition, qV = (1/2)mv2, or v = √(2qV/m).
Hence sin α = dqB/(m√(2qV/m)) = dB√(q/(2mV)), and α = sin−1(dB√(q/(2mV))) = 30°, on putting the values.
Teacher's Note: Slab thickness d is a chord projection: sin α = d/R, with R from accelerating voltage.
Exam Note: Write sin α = d/R before substituting.
Question 379. A charged particle moves along a circle of radius r = 100 mm in a uniform magnetic field with induction B = 10.0 mT. Find its velocity and period of revolution if that particle is (a) a non-relativistic proton; (b) a relativistic electron.
Solution.
(a) For motion along a circle, the magnetic force provides the centripetal force: mv2/R = evB, or v = eBR/m.
The period of revolution is T = 2π/ω = 2πR/v = 2πm/(eB).
Numerically, v ≈ 96 km/s and T ≈ 6.6 μs.
(b) Generally dp/dt = F. But dp/dt = d/dt[m0v/√(1 − v2/c2)] = m0(dv/dt)/√(1 − v2/c2) + m0v(v·dv/dt)/[c2(1 − v2/c2)3/2].
For transverse motion v·(dv/dt) = 0, so dp/dt = m0(dv/dt)/√(1 − v2/c2) = [m0/√(1 − v2/c2)](v2/r).
Thus m0v2/(r√(1 − v2/c2)) = Bev, or (v/c)/√(1 − v2/c2) = Ber/(m0c).
Or v/c = Ber/√(B2e2r2 + m02c2).
Finally, T = 2πr/v = 2πm0/(eB√(1 − v2/c2)) = (2π/(cBe))√(B2e2r2 + m02c2).
Numerically for the electron, v ≈ 0.51c ≈ 1.5 × 108 m/s and T ≈ 4.1 ns.
Teacher's Note: Magnetic force gives centripetal force; relativistically use p = qBr, so mass grows and period lengthens.
Exam Note: Give both formulas and numbers, v for proton in km/s.
Question 380. A relativistic particle with charge q and rest mass m0 moves along a circle of radius r in a uniform magnetic field of induction B. Find: (a) the modulus of the particle's momentum vector; (b) the kinetic energy of the particle; (c) the acceleration of the particle.
Solution.
(a) As before, p = Bqr.
(b) Total energy E = √(c2p2 + m02c4) = √(c2B2q2r2 + m02c4). Corrected: the book prints this expression as the kinetic energy, but it is the total energy; the kinetic energy is T = √(c2B2q2r2 + m02c4) − m0c2.
(c) Using the result for v from the previous problem, w = v2/r = c2/(r[1 + (m0c/(Bqr))2]).
Teacher's Note: Kinetic energy is total energy minus rest energy; the printed expression omitted the m₀c² subtraction.
Exam Note: Always subtract m₀c² for T.
Question 381. Up to what values of kinetic energy does the period of revolution of an electron and a proton in a uniform magnetic field exceed that at non-relativistic velocities by η = 1.0 %?
Solution.
From Q. 379, T = 2πε/(c2eB) (relativistic) and T0 = 2πm0c2/(c2eB) (non-relativistic), where ε = m0c2/√(1 − v2/c2) is the total energy.
Here δT = 2πTK/(c2eB), where TK is the kinetic energy.
Now δT/T0 = η = TK/(m0c2), so TK = η m0c2.
Numerically: electron ≈ 5 keV (0.01 × 0.511 MeV); proton ≈ 9 MeV (0.01 × 938 MeV).
Teacher's Note: Period ∝ total energy, so fractional increase equals T/m₀c²; the limit is η·m₀c².
Exam Note: Substitute rest energies for electron and proton.
Question 382. An electron accelerated by a potential difference V = 1.0 kV moves in a uniform magnetic field at an angle α = 30° to the vector B whose modulus is B = 29 mT. Find the pitch of the helical trajectory of the electron.
Solution.
T = eV = (1/2)mv2 (the potential difference is not large enough to cause significant deviation from the non-relativistic formula).
Thus v = √(2eV/m). So v∥ = √(2eV/m) cos α and v⊥ = √(2eV/m) sin α.
Now mv⊥2/r = Bev⊥, or r = mv⊥/(Be), and the period T = 2πr/v⊥ = 2πm/(Be).
Pitch p = v∥T = (2πm/(Be))√(2eV/m) cos α = 2π√(2mV/(eB2)) cos α ≈ 2.0 cm.
Teacher's Note: Only the component along B advances the electron; period depends just on m and B.
Exam Note: Pitch = v∥ × period; substitute numbers.
Question 383. A slightly divergent beam of non-relativistic charged particles accelerated by a potential difference V propagates from a point A along the axis of a straight solenoid. The beam is brought into focus at a distance l from the point A at two successive values of magnetic induction B1 and B2. Find the specific charge q/m of the particles.
Solution.
The charged particles traverse helical trajectories and are focussed on the axis after a whole number of turns. Thus
l/v0 = n·2πm/(qB1) = (n + 1)·2πm/(qB2).
So n/B1 = (n + 1)/B2 = 1/(B2 − B1).
Hence l/v0 = 2πm/(q(B2 − B1)).
With v02 = 2qV/m: l2/(2qV/m) = (2π)2/(B2 − B1)2 × 1/(q/m)2.
Hence q/m = 8π2V/(l2(B2 − B1)2).
Teacher's Note: Focus occurs when flight time is a whole number of turns; two consecutive foci differ by exactly one turn.
Exam Note: Subtract the two focus conditions to remove n.
Question 384. A non-relativistic electron originates at a point A lying on the axis of a straight solenoid and moves with velocity v at an angle α to the axis. The magnetic induction of the field is equal to B. Find the distance r from the axis to the point on the screen into which the electron strikes. The screen is oriented at right angles to the axis and is located at a distance l from the point A.
Solution.
Take A as the origin and the axis of the solenoid as the z-axis. Resolve the electron's velocity into v∥ along the axis and v⊥ perpendicular to it. The magnetic force does no work, so |v⊥| stays constant and v⊥ only changes direction in the x-y plane, while v∥ stays constant as it is parallel to B.
At time t: vx = v⊥ cos ωt = v sin α cos ωt, vy = v sin α sin ωt, vz = v cos α, where ω = eB/m.
Starting at x = y = z = 0, the law of motion (a helix) is
z = v cos α · t, x = (v sin α/ω) sin ωt, y = (v sin α/ω)(cos ωt − 1).
On the screen z = l, so t = l/(v cos α). Then
r2 = x2 + y2 = (2v2sin2α/ω2)(1 − cos(ωl/(v cos α))),
r = (2v sin α/ω)|sin(ωl/(2v cos α))| = (2mv/(eB)) sin α |sin(leB/(2mv cos α))|.
Teacher's Note: Screen-plane projection is a circle through the axis; r is its chord.
Exam Note: Fix time with z = l; r is a chord.
Question 385. From the surface of a round wire of radius a carrying a direct current I an electron escapes with a velocity v0 perpendicular to the surface. Find what will be the maximum distance of the electron from the axis of the wire before it turns back due to the action of the magnetic field generated by the current.
Solution.
Choose the wire along the z-axis and the initial direction of the electron along the x-axis. Then the magnetic field in the x-z plane is along the y-axis and outside the wire it is B = By = μ0I/(2πx), with Bx = Bz = 0 if y = 0.
The motion is confined to the x-z plane, with equations of motion d(mvx)/dt = −evzBy and d(mvz)/dt = +evxBy.
Multiplying the first by vx and the second by vz and adding: vx(dvx/dt) + vz(dvz/dt) = 0, so vx2 + vz2 = v02, or vz = √(v02 − vx2).
Then vx(dvx/dx) = −(e/m)√(v02 − vx2) μ0I/(2πx), or −vxdvx/√(v02 − vx2) = (μ0Ie/(2πm)) dx/x.
Integrating, √(v02 − vx2) = (μ0Ie/(2πm)) ln(x/a), using vx = v0 at x = a.
Now vx = 0 when x = xm, so xm = a ev0/b, where b = μ0Ie/(2πm).
Teacher's Note: Speed is constant; turning point is where radial velocity vanishes. The field falls as 1/x, giving a logarithm.
Exam Note: Quote x_m = a·exp(2πmv₀/μ₀Ie).
Question 386. A non-relativistic charged particle flies through the electric field of a cylindrical capacitor and gets into a uniform transverse magnetic field with induction B (Fig. 3.100). In the capacitor the particle moves along the arc of a circle, in the magnetic field, along a semi-circle of radius r. The potential difference applied to the capacitor is equal to V, the radii of the electrodes are equal to a and b, with a < b. Find the velocity of the particle and its specific charge q/m.
Solution.
Inside the capacitor the electric field follows a 1/r law, so the potential can be written as φ = V ln(r/a)/ln(b/a), E = −(V/ln(b/a))(1/r), where r is the distance from the axis of the capacitor.
Also mv2/r = (qV/ln(b/a))(1/r), or mv2 = qV/ln(b/a).
On the other hand, mv = qBr in the magnetic field.
Thus v = V/(Br ln(b/a)) and q/m = v/(Br) = V/(B2r2 ln(b/a)).
Teacher's Note: Field of cylindrical capacitor is ∝ 1/r, so mv² is independent of radius; combine with mv = qBr.
Exam Note: Use two conditions: electric (mv²) and magnetic (mv).
Question 387. Uniform electric and magnetic fields with strength E and induction B respectively are directed along the y axis (Fig. 3.101). A particle with specific charge q/m leaves the origin O in the direction of the x axis with an initial non-relativistic velocity v0. Find: (a) the coordinate yn of the particle when it crosses the y axis for the nth time; (b) the angle α between the particle's velocity vector and the y axis at that moment.
Solution.
The equations of motion are m dvx/dt = −qBvz, m dvy/dt = qE and m dvz/dt = qvxB.
First, vy = qEt/m and y = qEt2/(2m). Then vx2 + vz2 = constant = v02. In fact vx = v0 cos ωt and vz = v0 sin ωt, as one can check, with ω = qB/m.
Integrating again with x = z = 0 at t = 0: x = (v0/ω) sin ωt, z = (v0/ω)(1 − cos ωt).
Thus x = z = 0 for t = tn = n·2π/ω.
(a) At that instant yn = (qE/2m)(2π/(qB/m))2 n2 = 2π2mEn2/(qB2).
(b) tan αn = vx/vy (vz = 0 at this moment) = mv0/(qEtn) = Bv0/(2πEn).
Teacher's Note: Along B the motion is uniformly accelerated; perpendicular to B it is circular. Crossings occur at whole periods.
Exam Note: Treat the two motions independently, with t = 2πn/ω.
Question 388. A narrow beam of identical ions with specific charge q/m, possessing different velocities, enters the region of space where there are uniform parallel electric and magnetic fields with strength E and induction B, at the point O (see Fig. 3.101). The beam direction coincides with the x axis at the point O. A plane screen oriented at right angles to the x axis is located at a distance l from the point O. Find the equation of the trace that the ions leave on the screen. Demonstrate that at z ≪ l it is the equation of a parabola.
Solution.
The trajectory is x = (v0/ω) sin ωt, z = (v0/ω)(1 − cos ωt), y = qEt2/(2m), as before (see Q. 387), with ω = qB/m.
On the screen x = l, so sin ωt = ωl/v0, or ωt = sin−1(ωl/v0).
At that moment y = (qE/(2mω2))(sin−1(ωl/v0))2, so ωl/v0 = sin√(2mω2y/(qE)) = sin√(2qB2y/(Em)).
And z = (v0/ω)·2 sin2(ωt/2) = l tan(ωt/2), so
z = l tan(½ sin−1(ωl/v0)) = l tan√(qB2y/(2mE)).
For small z: √(qB2y/(2mE)) = tan−1(z/l) ≈ z/l, so qB2y/(2mE) ≈ z2/l2, or y = (2mE/(qB2l2)) z2, which is a parabola.
Teacher's Note: Use x = l to eliminate v₀ and t; y and z follow from one angle.
Exam Note: Final small-z form y ∝ z² must be shown.
Motion Of Charged Particles In Electric & Magnetic Fields (Part 2)
Question 389. A non-relativistic proton beam passes without deviation through the region of space where there are uniform transverse mutually perpendicular electric and magnetic fields with E = 120 kV/m and B = 50 mT. Then the beam strikes a grounded target. Find the force with which the beam acts on the target if the beam current is equal to I = 0.80 mA.
Solution.
In crossed fields eE = evB, so v = E/B.
The beam delivers momentum mv to the target for each proton; the number of protons arriving per second is I/e. Hence the force exerted on the target is
F = (I/e) m v = (I/e) m (E/B) = mIE/(eB) ≈ 20 μN.
Teacher's Note: Undeflected beam means v = E/B; force on target = rate of proton arrival × momentum of each.
Exam Note: Compute v = E/B first, then F = (I/e)mv.
Question 390. Non-relativistic protons move rectilinearly in the region of space where there are uniform mutually perpendicular electric and magnetic fields with E = 4.0 kV/m and B = 50 mT. The trajectory of the protons lies in the plane xz (Fig. 3.102) and forms an angle φ = 30° with the x axis. Find the pitch of the helical trajectory along which the protons will move after the electric field is switched off.
Solution.
When the electric field is switched off, the path is a helix with pitch Δl = v∥T, where v∥ is the velocity component parallel to B (along z) and T is the period of revolution.
Δl = v cos(90° − φ) T = v sin φ · T = v sin φ · 2πm/(qB), as T = 2πm/(qB). (1)
When both fields were present no net force acted, so qE = qvB sin(90° − φ) = qvB cos φ, or v = E/(B cos φ). (2)
From (1) and (2): Δl = (E/B)(2πm/(qB)) tan φ ≈ 6 cm.
Teacher's Note: Balance qE = qvB cosφ gives v; only the component along B advances the proton after E is off.
Exam Note: Use v from the force balance in the pitch formula.
Question 391. A beam of non-relativistic charged particles moves without deviation through the region of space A (Fig. 3.103) where there are transverse mutually perpendicular electric and induction fields with strength E and induction B. When the magnetic field is switched off, the trace of the beam on the screen S shifts by Δx. Knowing the distances a and b, find the specific charge q/m of the particles.
Solution.
With no deviation, qE = qvB (as v ⊥ B), so v = E/B. (1)
Now, when only the electric force acts in region A, let the deviation inside the field be x. Then x = (1/2)(qE/m)t2 = (1/2)(qvB/m)t2, where t = a/v is the time to pass through this region. Thus
x = (1/2)(qvB/m)(a/v)2 = (1/2)(q/m)(a2B2/E). (2)
In the region where the field is absent, the transverse velocity is (qvB/m)t = (q/m)aB. (3)
The further shift is (q/m)aB·t′, with t′ = b/v = bB/E, so it equals (q/m)(aB2b/E). (4)
From (2) and (4), Δx = (1/2)(q/m)(a2B2/E) + (q/m)(aB2b/E), or
q/m = 2EΔx/(aB2(a + 2b)).
Teacher's Note: Zero deflection gives v = E/B; with B off, deflection in A plus drift to screen.
Exam Note: Add the shift inside A and the drift shift b.
Question 392. A particle with specific charge q/m moves in the region of space where there are uniform mutually perpendicular electric and magnetic fields with strength E and induction B (Fig. 3.104). At the moment t = 0 the particle was located at the point O and had zero velocity. For the non-relativistic case find: (a) the law of motion x(t) and y(t) of the particle; the shape of the trajectory; (b) the length of the segment of the trajectory between two nearest points at which the velocity of the particle turns into zero; (c) the mean value of the particle's velocity vector projection on the x axis (the drift velocity).
Solution.
(a) The equation of motion is m d2r/dt2 = q(E + v × B). With B along z, v × B = i B ẏ − j B ẋ, so the equations become
dvx/dt = (qB/m)vy, dvy/dt = qE/m − (qB/m)vx, dvz/dt = 0.
Here vx = ẋ, vy = ẏ, vz = ż. Since vz = 0 initially, vz = 0 and z = 0, so the motion is confined to the x-y plane.
Multiply the second equation by i and add it to the first, with ξ = vx + ivy and ω = qB/m: dξ/dt = iωE/B − iωξ. Multiplying by eiωt gives d(ξeiωt)/dt = iωeiωtE/B, which integrates to ξ = E/B + Ce−iωt−iα, where C and α are real constants. Taking real and imaginary parts: vx = E/B + C cos(ωt + α), vy = −C sin(ωt + α).
Since vy = 0 at t = 0, take α = 0; then vx = 0 at t = 0 gives C = −E/B, and
vx = (E/B)(1 − cos ωt), vy = (E/B) sin ωt.
Integrating again with x = y = 0 at t = 0:
x(t) = (E/B)(t − sin ωt/ω), y(t) = (E/(ωB))(1 − cos ωt).
This is the equation of a cycloid.
(b) The velocity is zero when ωt = 2nπ. We see that v2 = vx2 + vy2 = (E/B)2(2 − 2 cos ωt), or v = ds/dt = (2E/B)|sin(ωt/2)|. The quantity inside the modulus is positive for 0 < ωt < 2π, so we can drop it and write the distance between two successive zeroes of velocity as S = (4E/(ωB))(1 − cos(ωt/2)). Putting ωt = 2π:
S = 8E/(ωB) = 8mE/(qB2).
(c) The drift velocity is in the x-direction with magnitude ⟨vx⟩ = ⟨(E/B)(1 − cos ωt)⟩ = E/B.
Teacher's Note: Crossed E and B give cycloid motion: circular rotation plus uniform drift E/B perpendicular to both fields.
Exam Note: Quote x(t), y(t), arc length 8mE/qB², and drift E/B.
Question 393. A system consists of a long cylindrical anode of radius a and a coaxial cylindrical cathode of radius b (b < a). A filament located along the axis of the system carries a heating current I producing a magnetic field in the surrounding space. Find the least potential difference between the cathode and anode at which the thermal electrons leaving the cathode without initial velocity start reaching the anode.
Solution.
When a current I flows along the axis, a magnetic field Bφ = μ0I/(2πρ) is set up, where ρ2 = x2 + y2. In components, Bx = −μ0Iy/(2πρ2), By = μ0Ix/(2πρ2), Bz = 0.
Let a potential difference V be set up between the inner cathode and the outer anode, so the potential is φ = V ln(ρ/b)/ln(a/b), b < ρ < a (as one can check from Laplace's equation). The electric field is Ex = −Vx/(ρ2ln(a/b)), Ey = −Vy/(ρ2ln(a/b)), Ez = 0.
With the electron charge −|e|, the equation of motion along z is d(mvz)/dt = −|e|(μ0I/(2πρ2))(xẋ + yẏ) = −|e|(μ0I/2π) d(ln ρ)/dt.
Integrating, with vz = 0 where the electron starts (ρ = b): mvz = −|e|(μ0I/2π) ln(ρ/b). (The book takes the constant with ρ = a; the electron actually starts at ρ = b, so the constant is fixed there.)
Energy conservation (magnetic forces do no work): (1/2)m(vx2 + vy2) + (1/2)mvz2 = |e|V ln(ρ/b)/ln(a/b), so
(1/2)m(vx2 + vy2) = |e|V ln(ρ/b)/ln(a/b) − (|e|2/2m)(μ0I/2π)2 ln2(ρ/b).
The right side must be non-negative for all b < ρ < a, i.e. V ≥ (|e|/2m)(μ0I/2π)2 ln(ρ/b) ln(a/b) for all ρ. The most severe case is ρ = a. Corrected: the book prints the final condition with ln(a/b) to the first power; working it through gives
Vmin = (|e|/2m)(μ0I/2π)2 ln2(a/b).
Teacher's Note: Axial momentum ties to ln ρ; the radial energy must stay non-negative everywhere, the critical point being the anode.
Exam Note: State the condition at ρ = a with ln squared.
Question 394. Magnetron is a device consisting of a filament of radius a and a coaxial cylindrical anode of radius b which are located in a uniform magnetic field parallel to the filament. An accelerating potential difference V is applied between the filament and the anode. Find the value of magnetic induction at which the electrons leaving the filament with zero velocity reach the anode.
Solution.
This differs from the previous problem in a ↔ b, and the magnetic field is along the z-direction: Bx = By = 0, Bz = B. Taking the electron charge as −|e|, the equations of motion are
d(mvx)/dt = |e|Vx/(ρ2ln(b/a)) − |e|Bẏ, d(mvy)/dt = |e|Vy/(ρ2ln(b/a)) + |e|Bẋ, and d(mvz)/dt = 0, so z = 0.
The motion is confined to the plane z = 0. Eliminating B from the first two equations, d((1/2)mv2)/dt = |e|V(xẋ + yẏ)/(ρ2ln(b/a)), or (1/2)mv2 = |e|V ln(ρ/a)/ln(b/a). So, as expected since magnetic forces do no work, v = √(2|e|V/m) at ρ = b.
Eliminating V instead, d[m(xvy − yvx)]/dt = |e|B(xẋ + yẏ), i.e. m(xvy − yvx) = |e|Bρ2/2 + constant. The constant follows from v = 0 at ρ = a. Thus m(xvy − yvx) = (|e|B/2)(ρ2 − a2) > 0.
At ρ = b, m(xvy − yvx) ≤ mvb. Thus mvb ≥ (|e|B/2)(b2 − a2), so
B ≤ (2mb/(|e|(b2 − a2)))√(2|e|V/m) = (2b/(b2 − a2))√(2mV/|e|).
(The book's last line prints B under the root where V is meant; corrected here.)
Teacher's Note: Angular momentum about the axis grows with ρ²; it cannot exceed mvb at the anode, which bounds B from above.
Exam Note: Electrons reach anode only if B ≤ B_max, not above.
Question 395. A charged particle with specific charge q/m starts moving in the region of space where there are uniform mutually perpendicular electric and magnetic fields. The magnetic field is constant and has an induction B while the strength of the electric field varies with time as E = Em cos ωt, where ω = qB/m. For the non-relativistic case find the law of motion x(t) and y(t) of the particle if at the moment t = 0 it was located at the point O (see Fig. 3.104). What is the approximate shape of the trajectory of the particle?
Solution.
The equations are as in Q. 392: dvx/dt = (qB/m)vy, dvy/dt = (qEm/m) cos ωt − (qB/m)vx, and dvz/dt = 0.
With ω = qB/m and ξ = vx + ivy we get dξ/dt = i(Em/B)ω cos ωt − iωξ.
Multiplying by eiωt: d(ξeiωt)/dt = i(Em/2B)ω(e2iωt + 1).
Integrating, ξeiωt = (Em/4B)e2iωt + (Em/2B)iωt + C, so ξ = (Em/4B)eiωt + i(Em/2B)ωte−iωt + Ce−iωt.
Since ξ = 0 at t = 0, C = −Em/(4B). Thus ξ = i(Em/2B) sin ωt + i(Em/2B)ωte−iωt, and taking real and imaginary parts
vx = (Em/2B)ωt sin ωt, vy = (Em/2B) sin ωt + (Em/2B)ωt cos ωt.
Integrating again, with x = y = 0 at t = 0:
x = (a/(2ω2))(sin ωt − ωt cos ωt), y = (a/(2ω)) t sin ωt, where a = qEm/m.
The trajectory is an unwinding spiral.
Teacher's Note: Field resonates with cyclotron frequency, so the radius grows linearly in time: an unwinding spiral.
Exam Note: Use complex velocity ξ = vx + i vy.
Question 396. The cyclotron's oscillator frequency is equal to ν = 10 MHz. Find the effective accelerating voltage applied across the dees of that cyclotron if the distance between the neighbouring trajectories of protons is not less than Δr = 1.0 cm, with the trajectory radius being equal to r = 0.5 m.
Solution.
For a charged particle (proton) in a magnetic field, mv2/r = Bev, or mv = Ber. But ω = eB/m.
Thus the energy is E = (1/2)mv2 = (1/2)mω2r2.
So ΔE = mω2rΔr = 4π2ν2mrΔr.
On the other hand ΔE = 2eV, where V is the effective accelerating voltage across the dees, there being two crossings per revolution. So
V ≥ 2π2ν2mrΔr/e ≈ 0.10 MV (about 103 kV).
Teacher's Note: Energy per turn depends on radius step: ΔE = mω²rΔr, and two gap crossings give 2eV per turn.
Exam Note: Do not forget the factor 2 for two crossings.
Question 397. Protons are accelerated in a cyclotron so that the maximum curvature radius of their trajectory is equal to r = 50 cm. Find: (a) the kinetic energy of the protons when the acceleration is completed if the magnetic induction in the cyclotron is B = 1.0 T; (b) the minimum frequency of the cyclotron's oscillator at which the kinetic energy of the protons amounts to T = 20 MeV by the end of acceleration.
Solution.
(a) From mv2/r = Bev, or mv = Ber, the kinetic energy is T = (Ber)2/(2m) = (1/2)mv2 ≈ 12 MeV.
(b) From 2π/ω = 2πr/v we get fmin = v/(2πr) = (1/(πr))√(T/(2m)).
Corrected: the book prints 15 MHz. With T = 20 MeV, v = √(2T/m) ≈ 6.19 × 107 m/s, so fmin ≈ 19.7 MHz ≈ 20 MHz.
Teacher's Note: Maximum radius fixes final speed: T = (Ber)²/2m. Orbit frequency is v/(2πr) for the required energy.
Exam Note: Substitute carefully; unit MeV to joules.
Question 398. Singly charged ions He+ are accelerated in a cyclotron so that their maximum orbital radius is r = 60 cm. The frequency of a cyclotron's oscillator is equal to ν = 10.0 MHz, the effective accelerating voltage across the dees is V = 50 kV. Neglecting the gap between the dees, find: (a) the total time of acceleration of the ion; (b) the approximate distance covered by the ion in the process of its acceleration.
Solution.
(a) The total time of acceleration is t = n/(2ν), where n is the number of passages across the dees gap.
But T = neV = B2e2r2/(2m), or n = B2er2/(2mV).
So t = (π/(eB/m)) × B2er2/(2mV) = πBr2/(2V) = π2mνr2/(eV) ≈ 30 μs.
(b) The distance covered is s = Σ vn·(1/(2ν)). But vn = √(2eV/m)·√n, so
s = √(eV/(2mν2)) Σ√n ≈ √(eV/(2mν2)) ∫√n dn = √(eV/(2mν2))·(2/3)n3/2.
With n = B2e2r2/(2eVm) = 2π2mν2r2/(eV), we get
s ≈ 4π3ν2mr2/(3eV) ≈ 1.24 km.
Teacher's Note: Each crossing adds eV and takes half a period; replace the sum by an integral.
Exam Note: Count crossings n from final energy first.
Question 399. Since the period of revolution of electrons in a uniform magnetic field rapidly increases with the growth of energy, a cyclotron is unsuitable for their acceleration. This drawback is rectified in a microtone (Fig. 3.105) in which a change ΔT in the period of revolution of an electron is made multiple with the period of accelerating field T0. How many times has an electron to cross the accelerating gap of a microtone to acquire an energy W = 4.6 MeV if ΔT = T0, the magnetic induction is equal to B = 107 mT, and the frequency of accelerating field to ν = 3000 MHz?
Solution.
(Fig. 3.105 shows the microtron: a set of circular orbits of increasing radius, all touching at the accelerating gap on one side, with an a.c. source connected across the gap. It is described here in words.)
In the nth orbit, 2πrn/vn = nT0 = n/ν. We ignore the rest mass of the electron and write vn ≈ c. Also W = cp = cBern.
Thus 2πW/(Bec2) = n/ν, or n = 2πWν/(Bec2) = 9.
Teacher's Note: Orbit period must grow by one field period per turn; since v ≈ c, orbit radius is proportional to energy.
Exam Note: Equate orbit period nT₀ with 2πr/c.
Question 400. The ill effects associated with the variation of the period of revolution of the particle in a cyclotron due to the increase of its energy are eliminated by slow monitoring (modulating) the frequency of accelerating field. According to what law ω(t) should this frequency be monitored if the magnetic induction is equal to B and the particle acquires an energy ΔW per revolution? The charge of the particle is q and its mass is m.
Solution.
The basic condition is the relativistic equation mv2/r = Bqv, or mv = m0v/√(1 − v2/c2) = Bqr. Calling ω = Bq/m and ω0 = Bq/m0, we get
ω = ω0/√(1 + ω02r2/c2), where r is the radius of the instantaneous orbit.
The time of acceleration is t = Σn=1N 1/(2νn) = Σ π/ωn = Σ πWn/(qBc2), where N is the number of crossings of either dee.
But Wn = m0c2 + nΔW/2, there being two crossings of the dees per revolution. So
t = Σ πm0c2/(qBc2) + Σ πnΔW/(2qBc2) = Nπ/ω0 + [N(N + 1)/4] πΔW/(qBc2) ≈ N2πΔW/(4qBc2) (N ≫ 1).
Also r = rN ≈ vN/ωN ≈ (c/π)(∂t/∂N) ≈ ΔW N/(2qBc).
Hence finally ω = ω0/√(1 + (q2B2/(m02c2))·(ΔW2/(4q2B2c2))N2) = ω0/√(1 + (ΔW)2/(4m02c4) · (4qBc2/(πΔW)) t), i.e.
ω(t) = ω0/√(1 + αt), where ω0 = qB/m0 and α = qBΔW/(πm02c2).
Teacher's Note: Frequency must follow ω = qBc²/W as energy grows linearly with time, giving ω₀/√(1 + αt).
Exam Note: State ω(t) with α = qBΔW/(πm₀²c²).
Question 401. A particle with specific charge q/m is located inside a round solenoid at a distance r from its axis. With the current switched into the winding, the magnetic induction of the field generated by the solenoid amounts to B. Find the velocity of the particle and the curvature radius of its trajectory, assuming that during the increase of current flowing in the solenoid the particle shifts by a negligible distance.
Solution.
When the magnetic field is being set up in the solenoid, an electric field is induced in it, which accelerates the charged particle. If Ḃ is the rate at which the magnetic field is increasing, then πr2Ḃ = 2πrE, or E = (1/2)rḂ.
Thus m dv/dt = (1/2)rḂq, or v = qBr/(2m).
After the field is set up, the particle executes circular motion of radius ρ, where mv = Bqρ, or ρ = r/2.
Teacher's Note: Changing flux induces a circulating E field: E = rḂ/2 accelerates the charge before it circles.
Exam Note: Use Faraday's law for E, then mv = qBρ.
Question 402. In a betatron the magnetic flux across an equilibrium orbit of radius r = 25 cm grows during the acceleration time at practically constant rate Φ̇ = 5.0 Wb/s. In the process, the electrons acquire an energy W = 25 MeV. Find the number of revolutions made by the electron during the acceleration time and the corresponding distance covered by it.
Solution.
The increment in energy per revolution is eΦ̇, so the number of revolutions is N = W/(eΦ̇) = 25 × 106 eV/(5.0 eV) = 5 × 106.
The distance traversed is s = 2πrN ≈ 7.9 × 103 km.
Teacher's Note: EMF per turn equals Φ̇, so each revolution adds eΦ̇ of energy; divide total energy by it.
Exam Note: Give N and s = 2πrN with units.
Question 403. Demonstrate that electrons move in a betatron along a round orbit of constant radius provided the magnetic induction on the orbit is equal to half the mean value of that inside the orbit (the betatron condition).
Solution.
On the one hand, dp/dt = eE = (e/(2πr)) dΦ/dt = (e/(2πr)) d/dt ∫0r 2πr′B(r′)dr′.
On the other hand p = B(r)er with r = constant, so dp/dt = er dB(r)/dt = er Ḃ(r).
Hence erḂ(r) = (e/(2πr)) πr2 d⟨B⟩/dt, so Ḃ(r) = (1/2) d⟨B⟩/dt.
This equation is most easily satisfied by taking B(r0) = (1/2)⟨B⟩.
Teacher's Note: Two expressions for dp/dt, tangential eE and p = eBr at fixed r, force B(r₀) = ½⟨B⟩.
Exam Note: Equate dp/dt from induced field and from p = eBr.
Question 404. Using the betatron condition, find the radius of a round orbit of an electron if the magnetic induction is known as a function of distance r from the axis of the field. Examine this problem for the specific case B = B0 − ar2, where B0 and a are positive constants.
Solution.
The condition is B(r0) = (1/2)⟨B⟩ = (1/2)∫0r0 B·2πr dr/(πr02), or B(r0) = (1/r02)∫0r0 Br dr. This gives r0.
In the present case, B0 − ar02 = (1/r02)∫0r0(B0 − ar2)r dr = (1/2)(B0 − (1/2)ar02).
Or (3/4)ar02 = (1/2)B0, i.e. r0 = √(2B0/(3a)).
Teacher's Note: Solve B(r₀) = (1/r₀²)∫B r dr; for B₀ − ar² the integral is elementary.
Exam Note: Show the integral before simplifying.
Question 405. Using the betatron condition, demonstrate that the strength of the eddy-current field has the extremum magnitude on an equilibrium orbit.
Solution.
The induced electric field (eddy-current field) is E(r) = (1/(2πr)) d/dt ∫0r 2πr′B(r′)dr′.
Hence dE/dr = −(1/(2πr2)) d/dt ∫0r 2πr′B(r′)dr′ + dB(r)/dt = −(1/2) d⟨B⟩/dt + dB(r)/dt.
This vanishes for r = r0 by the betatron condition, where r0 is the radius of the equilibrium orbit. So E has an extremum there.
Teacher's Note: Differentiate E(r): dE/dr = Ḃ(r) − ½d⟨B⟩/dt, which is zero by the betatron condition.
Exam Note: Show dE/dr = 0 at r₀.
Question 406. In a betatron the magnetic induction on an equilibrium orbit with radius r = 20 cm varies during a time interval Δt = 1.0 ms at practically constant rate from zero to B = 0.40 T. Find the energy acquired by the electron per revolution.
Solution.
From the betatron condition, (1/2) d⟨B⟩/dt = Ḃ(r0) = B/Δt. Thus d⟨B⟩/dt = 2B/Δt.
And dΦ/dt = πr2 d⟨B⟩/dt = 2πr2B/Δt.
So the energy increment per revolution is e dΦ/dt = 2πr2eB/Δt ≈ 0.10 keV (about 100 eV).
Teacher's Note: Flux rate through the orbit is twice πr² times orbit-field rate; energy per turn = e × flux rate.
Exam Note: Quote 2πr²eB/Δt and the value ≈ 100 eV.
Question 407. The magnetic induction in a betatron on an equilibrium orbit of radius r varies during the acceleration time at practically constant rate from zero to B. Assuming the initial velocity of the electron to be equal to zero, find: (a) the energy acquired by the electron during the acceleration time; (b) the corresponding distance covered by the electron if the acceleration time is equal to Δt.
Solution.
(a) Even in the relativistic case, p = Ber. Thus
W = √(c2p2 + m02c4) − m0c2 = m0c2(√(1 + (Ber/(m0c))2) − 1).
(b) The distance traversed is 2πr·W/(eΦ̇) = 2πr·W/(2πr2eB/Δt) = WΔt/(Ber), using the result of the previous problem.
Teacher's Note: Orbit radius fixed means p = eBr at all times; energy follows from relativistic E–p relation.
Exam Note: Use W = √(c²p² + m₀²c⁴) − m₀c².
JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 22 Motion Of Charged Particles In Electric And Magne
Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 22 Motion Of Charged Particles In Electric And Magne
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 22 Motion Of Charged Particles In Electric And Magne PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with IE Irodov Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your JEE Exam Preparation
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.