Official Class 10 Chemistry Worksheets: Everyday Chemistry Questions
Access comprehensive chapter-wise worksheets for Everyday Chemistry Questions using the Everyday Chemistry Questions CBSE Class 10 Chemistry Worksheets Set 13. Designed to align with the 2026-27 academic syllabus for Class 10 Chemistry, these printable practice sets help students reinforce key concepts and improve their overall exam readiness.
Solved Practice Worksheets for Chemistry
Access the complete worksheet PDF for Class 10 Chemistry below. Regular practice with these targeted academic tasks builds familiarity with standard question patterns and helps secure higher marks in final school examinations.
Questions with Answers
Question 1. How will you distinguish between a saturated and an unsaturated solution?
Answer:
Add a small crystal of the solute to the solution at the same temperature and stir. In an unsaturated solution the crystal dissolves. In a saturated solution the crystal does not dissolve and remains unchanged. In a supersaturated solution it makes extra solute crystallise out.
In simple words: An unsaturated solution dissolves more solute; a saturated one does not.
Teacher's Note:
1. A saturated solution holds the maximum amount of solute at that temperature.
2. Warming the solution usually makes it unsaturated.
Question 2. Give an example of a solution of a gas in a gas.
Answer:
Air is a solution of oxygen, carbon dioxide and other gases in nitrogen. All gases mix completely in all proportions, so every mixture of gases that do not react is a solution.
In simple words: Air (oxygen and other gases dissolved in nitrogen).
Teacher's Note:
1. The solvent is the component present in the larger amount.
2. Gases are miscible in all proportions.
Question 3. What is the gas that we breathe in, in far greater proportion than oxygen?
Answer:
Nitrogen. Air contains about 78 per cent nitrogen and about 21 per cent oxygen by volume. We breathe in nitrogen but our bodies do not use it, so it is breathed out unchanged.
In simple words: Nitrogen (about 78 per cent of air).
Teacher's Note:
1. Argon is the third most abundant gas, about 0.9 per cent.
2. Carbon dioxide is about 0.04 per cent.
Question 4. How does the solubility of a gas change with pressure?
Answer:
The solubility of a gas in a liquid increases with an increase of pressure and decreases when the pressure falls (Henry's law). In soda water, carbon dioxide is dissolved under high pressure, and when the bottle is opened the pressure drops and bubbles of gas escape.
In simple words: It increases as the pressure increases.
Teacher's Note:
1. Solubility of gases decreases when the temperature rises.
2. Henry's law: solubility is proportional to the pressure of the gas.
Question 5. Give an example of a solution of a solid in a solid.
Answer:
An alloy such as brass (zinc dissolved in copper) or bronze (tin in copper). In such an alloy, the atoms of one metal are spread evenly through the other in a single uniform solid.
In simple words: Brass, an alloy of copper and zinc.
Teacher's Note:
1. Alloys are solid solutions.
2. Gold ornaments contain copper or silver dissolved in gold.
Question 6. What would you do to make the solute separate from a supersaturated solution?
Answer:
A supersaturated solution holds more solute than it normally can at that temperature. Adding a tiny crystal of the solute (a seed crystal), scratching the inside of the vessel with a glass rod, or shaking or cooling the solution makes the extra solute crystallise out quickly until the solution is just saturated.
In simple words: Add a seed crystal or scratch the container.
Teacher's Note:
1. Sodium acetate hand warmers use this idea.
2. The crystals provide a surface on which solute can deposit.
Question 7. Who stated the principle that if a system in equilibrium is subject to a change, the reaction will occur so as to counteract the change?
Answer:
This is Le Chatelier's principle, put forward by the French chemist Henry Louis Le Chatelier in 1884. It predicts the effect of changes of concentration, pressure and temperature on a system in chemical equilibrium.
In simple words: Henry Louis Le Chatelier.
Teacher's Note:
1. A catalyst does not shift the equilibrium.
2. The principle is used to choose conditions in industrial processes.
Question 8. The solubility curve of calcium hydroxide slopes downwards. Why?
Answer:
Calcium hydroxide dissolves with the release of heat (the dissolving is exothermic). By Le Chatelier's principle, raising the temperature favours the reverse process, in which the solid separates out, so the solubility decreases with rising temperature.
In simple words: Its dissolving gives out heat, so more heat reduces the solubility.
Teacher's Note:
1. Most solids absorb heat while dissolving and become more soluble when heated.
2. Lime water turns turbid on warming.
Question 9. Give examples of weak and strong electrolytes.
Answer:
Strong electrolytes ionise almost completely in water: hydrochloric acid, sodium hydroxide, sodium chloride and potassium nitrate. Weak electrolytes ionise only slightly: acetic acid, carbonic acid, ammonium hydroxide and water.
In simple words: Strong: HCl, NaOH, NaCl. Weak: CH\( _3 \)COOH, NH\( _4 \)OH.
Teacher's Note:
1. Strong electrolytes conduct electricity well in solution.
2. Weak electrolytes establish an equilibrium between ions and molecules.
Question 10. What is the negatively charged ion in an electrolyte called?
Answer:
An anion. During electrolysis anions move to the positive electrode, the anode. Examples are Cl\( ^- \), OH\( ^- \) and SO\( _4^{2-} \). Positive ions are called cations and move to the cathode.
In simple words: Anion.
Teacher's Note:
1. Anions are attracted to the anode.
2. Atoms become anions by gaining electrons.
Question 11. What is a molar solution of a substance?
Answer:
A molar solution contains one mole (the gram molecular mass) of the solute dissolved in enough solvent to make one litre of solution. Its concentration is 1 M. For sodium hydroxide, 40 g in one litre makes a 1 M solution.
In simple words: A solution containing one mole of solute per litre of solution.
Teacher's Note:
1. Molarity = moles of solute / litres of solution.
2. A 0.1 M solution is called a decimolar solution.
Question 12. If sodium sulphide is an electrolyte, what is carbon disulphide?
Answer:
Carbon disulphide is a non-electrolyte. Sodium sulphide is ionic and gives ions in the molten state or in solution, so it conducts. Carbon disulphide is a covalent molecular liquid that does not form ions, so it does not conduct.
In simple words: A non-electrolyte, because it is covalent.
Teacher's Note:
1. Ionic compounds are electrolytes.
2. Sugar, alcohol and benzene are also non-electrolytes.
Question 13. Why do metals conduct electricity well?
Answer:
In a metal, each atom gives up its outer electrons, which move freely through the whole metal as a sea of electrons. When a potential difference is applied, these free electrons drift in one direction and constitute the current.
In simple words: Metals have free electrons that carry the current.
Teacher's Note:
1. Resistance of a metal increases with temperature.
2. Conduction in electrolytes is by ions, not electrons.
Question 14. How is the equilibrium constant of a reaction defined?
Answer:
For a reaction aA + bB \( \rightleftharpoons \) cC + dD at equilibrium, the equilibrium constant is K = [C]\( ^c \)[D]\( ^d \) / [A]\( ^a \)[B]\( ^b \). It is the product of the concentrations of the products divided by that of the reactants, each raised to the power of its coefficient in the balanced equation. It depends only on temperature.
In simple words: Concentrations of products over reactants, each raised to its coefficient, at equilibrium.
Teacher's Note:
1. A large K means the products are favoured.
2. K does not change with concentration or catalyst.
Question 15. What is acid rain?
Answer:
Burning of coal and petrol releases sulphur dioxide and nitrogen oxides. These dissolve in rain water forming sulphuric acid and nitric acid, so the rain has a pH below 5.6. Acid rain damages buildings, marble monuments, crops and aquatic life.
In simple words: Rain water containing sulphuric and nitric acids from air pollution.
Teacher's Note:
1. Normal rain is slightly acidic because of dissolved carbon dioxide.
2. Acid rain corrodes the marble of the Taj Mahal.
Question 16. What is the catalyst used in the manufacture of sulphuric acid by the contact process?
Answer:
Vanadium pentoxide (V\( _2 \)O\( _5 \)) is used as the catalyst for the oxidation of sulphur dioxide to sulphur trioxide at about 450 \( ^\circ \)C. Platinum was used earlier but it is expensive and gets poisoned easily.
In simple words: Vanadium pentoxide.
Teacher's Note:
1. 2SO\( _2 \) + O\( _2 \) \( \rightleftharpoons \) 2SO\( _3 \).
2. The SO\( _3 \) is absorbed in concentrated sulphuric acid to make oleum.
Question 17. How many phases are present in a system containing three solids?
Answer:
Three. Each distinct solid is a separate phase, with its own uniform composition and a boundary separating it from the others. Even if the solids are ground into powders and mixed, the system has three phases unless they dissolve in each other.
In simple words: Three phases.
Teacher's Note:
1. A phase is a physically distinct, homogeneous part of a system.
2. Gases mix completely and form only one phase.
Question 18. Naphthalene has a low melting point whereas common salt has a high melting point. Why?
Answer:
Naphthalene is a covalent molecular solid, whose molecules are held together only by weak van der Waals forces, which are easily overcome by a little heat (melting point about 80 \( ^\circ \)C). Common salt is an ionic solid in which each ion is held by strong electrostatic forces of attraction in a crystal lattice (melting point about 801 \( ^\circ \)C).
In simple words: Weak forces between molecules in naphthalene, strong ionic bonds in salt.
Teacher's Note:
1. Ionic compounds usually have high melting and boiling points.
2. Naphthalene also sublimes on heating.
Question 19. A mixture of mercury and water is a two-phase system. Why?
Answer:
Mercury and water do not mix. They form two separate liquid layers, each uniform throughout, with a clear boundary between them. Each layer is a phase, so there are two phases (a third, a vapour phase, may also be present).
In simple words: Because the two liquids stay in separate layers.
Teacher's Note:
1. Miscible liquids such as alcohol and water form one phase.
2. Mercury is much denser than water and lies at the bottom.
Question 20. What is the pH scale?
Answer:
The pH scale measures how acidic or basic a solution is. pH = \( - \)log\( _{10} \)[H\( ^+ \)], where the concentration is in mol per litre. The scale usually runs from 0 to 14: pH below 7 is acidic, pH 7 is neutral and pH above 7 is basic. A change of one unit means a ten-fold change in H\( ^+ \) concentration.
In simple words: A scale from 0 to 14 that shows how acidic or basic a solution is.
Teacher's Note:
1. Pure water has pH 7 at 25 \( ^\circ \)C.
2. Universal indicator shows pH by colour.
Question 21. On adding concentrated sulphuric acid to blue crystals of copper sulphate, the crystals become white. Give reasons.
Answer:
Concentrated sulphuric acid is a powerful dehydrating agent. It takes away the water of crystallisation from the blue hydrated copper sulphate (CuSO\( _4 \).5H\( _2 \)O) and leaves white anhydrous copper sulphate. The blue colour is due to the hydrated ion.
In simple words: The acid removes the water of crystallisation, leaving white anhydrous copper sulphate.
Teacher's Note:
1. CuSO\( _4 \).5H\( _2 \)O \( \rightarrow \) CuSO\( _4 \) + 5H\( _2 \)O.
2. Adding water to the white solid brings back the blue colour.
Question 22. Why is water a neutral compound?
Answer:
Pure water ionises very slightly: H\( _2 \)O \( \rightleftharpoons \) H\( ^+ \) + OH\( ^- \). The two ions are always produced in equal numbers, so at 25 \( ^\circ \)C [H\( ^+ \)] = [OH\( ^- \)] = 10\( ^{-7} \) mol/L. Because neither ion is in excess, water is neutral and its pH is 7.
In simple words: Water gives equal numbers of H\( ^+ \) and OH\( ^- \) ions.
Teacher's Note:
1. Acids have more H\( ^+ \) than OH\( ^- \); bases have more OH\( ^- \).
2. The product [H\( ^+ \)][OH\( ^- \)] is 10\( ^{-14} \) at 25 \( ^\circ \)C.
Question 23. How does temperature affect the yield of ammonia in the Haber process?
Answer:
The reaction N\( _2 \) + 3H\( _2 \) \( \rightleftharpoons \) 2NH\( _3 \) is exothermic. By Le Chatelier's principle, a lower temperature increases the yield of ammonia. However, a very low temperature makes the reaction too slow, so a compromise temperature of about 450 \( ^\circ \)C is used with an iron catalyst and a high pressure of about 200 atm.
In simple words: Lower temperature gives more ammonia, but too low a temperature makes the reaction slow.
Teacher's Note:
1. High pressure also raises the yield, because four molecules become two.
2. The catalyst only speeds up the attainment of equilibrium.
Question 24. What do you call a salt that loses its water of crystallisation on exposure to air and turns into an amorphous powder?
Answer:
Such a salt is called efflorescent, and the process is efflorescence. Washing soda (Na\( _2 \)CO\( _3 \).10H\( _2 \)O) is an example: crystals of it crumble to a white powder in dry air.
In simple words: An efflorescent salt, for example washing soda.
Teacher's Note:
1. Deliquescent substances, such as sodium hydroxide, absorb moisture and become wet.
2. Hygroscopic substances absorb moisture without dissolving.
Question 25. How would you make a copper spoon look like a silver spoon?
Answer:
By electroplating it with silver. The spoon is cleaned and made the cathode in an electrolytic bath of silver nitrate (or sodium argentocyanide) solution, and a silver plate is the anode. When a current passes, silver ions are deposited as a thin bright layer of silver on the spoon.
In simple words: Electroplate it with silver, making the spoon the cathode.
Teacher's Note:
1. The object to be plated is always the cathode.
2. The anode is made of the plating metal, so the electrolyte stays at constant strength.
Question 26. Who enunciated the periodic law?
Answer:
Dmitri Mendeleev, the Russian chemist, stated the periodic law in 1869: the properties of elements are a periodic function of their atomic masses. Henry Moseley later showed in 1913 that the properties are periodic functions of atomic numbers, which is the modern periodic law.
In simple words: Mendeleev (modern form by Moseley).
Teacher's Note:
1. Mendeleev left gaps for undiscovered elements and predicted their properties.
2. Moseley used X-ray spectra to find atomic numbers.
Question 27. What is the effect of pressure on a gaseous reaction in which one molecule of the reactant dissociates into two molecules of the product?
Answer:
For A \( \rightleftharpoons \) 2B the forward reaction increases the number of gas molecules. By Le Chatelier's principle, an increase in pressure shifts the equilibrium to the side with fewer molecules, so dissociation is reduced. A decrease in pressure increases the dissociation.
In simple words: Higher pressure reduces the dissociation; lower pressure increases it.
Teacher's Note:
1. Pressure has no effect when the number of gas molecules is the same on both sides.
2. N\( _2 \)O\( _4 \) \( \rightleftharpoons \) 2NO\( _2 \) is an example.
Question 28. Which element serves as the standard by which the atomic masses of all other elements are measured?
Answer:
Carbon-12 is the standard. One atomic mass unit (u) is exactly one twelfth of the mass of a carbon-12 atom. Oxygen-16 was used earlier, and before that hydrogen.
In simple words: Carbon-12.
Teacher's Note:
1. 1 u = 1.66 \( \times \) 10\( ^{-27} \) kg.
2. Relative atomic mass is a ratio, so it has no unit.
Question 29. Is benzene an electrolyte or a non-electrolyte?
Answer:
Benzene is a non-electrolyte. It is a covalent compound, which does not give ions in the liquid state or when dissolved in non-polar solvents, so it does not conduct electricity.
In simple words: A non-electrolyte.
Teacher's Note:
1. Only substances that give free ions can conduct as liquids or solutions.
2. Most organic compounds are non-electrolytes.
Question 30. What do you understand by the statement that the equilibrium attained in a reversible reaction is dynamic?
Answer:
At equilibrium the forward and backward reactions have not stopped; both continue at exactly the same rate. Reactants form products and products form reactants at the same speed, so the concentrations remain constant and no net change is seen, although molecules are still reacting.
In simple words: Both reactions keep going at equal rates, so nothing changes overall.
Teacher's Note:
1. Equilibrium can be approached from either side.
2. Isotope labelling shows that the exchange continues.
Question 31. Why are pickles not stored in copper or aluminium vessels?
Answer:
Pickles contain acids (acetic acid, citric acid) and common salt. These attack copper and aluminium, forming copper salts such as copper acetate, which are poisonous, and aluminium salts. The food would be spoilt and could cause food poisoning, so glass or ceramic containers are used.
In simple words: The acids in pickles react with the metals and form poisonous salts.
Teacher's Note:
1. Never cook sour foods in copper vessels unless they are tin-lined.
2. Plastic and glass are unreactive containers.
Free study material for Science
Download Class 10 Chemistry Everyday Chemistry Questions Practice Worksheets
Mastering Everyday Chemistry Questions with Printable Worksheets
Explore reliable practice questions for Everyday Chemistry Questions tailored for Class 10 Chemistry learners. Use these structured worksheets to evaluate exam preparedness and strengthen problem-solving skills throughout the 2026 academic session.
Verified Solutions and NCERT Alignment
Designed around the official curriculum for Class 10 Chemistry, these practice sheets guarantee standard compliance. Reviewing step-by-step solutions after completion sharpens your accuracy and clarifies complex sub-topics within Everyday Chemistry Questions.
Additional Study Resources for Class 10 Chemistry
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of free, up-to-date printable assignments to maximize your academic results in upcoming CBSE evaluations.
FAQs
You can download the latest chapter-wise printable worksheets for Class 10 Chemistry Everyday Chemistry Questions for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.
Yes, Class 10 Chemistry worksheets for Everyday Chemistry Questions focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.
Yes, we have provided solved worksheets for Class 10 Chemistry Everyday Chemistry Questions to help students verify their answers instantly.
Yes, our Class 10 Chemistry test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.
For Everyday Chemistry Questions, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.