Official Textbook Solutions: Class 10 Science Chapter 02 Acids Base And Salts
Explore reliable textbook solutions for Chapter 02 Acids Base And Salts tailored for Class 10 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Chapter-wise Solutions for Science: Chapter 02 Acids Base And Salts
View or download the dedicated Chapter 02 Acids Base And Salts solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.
2. Acids, Base and Salts
Periodic Test
Question 1. Which one of the following has a higher concentration of H+ ions? 1M HCl or 1M CH3COOH?
Solution.
1M HCl has a higher concentration of H+ ions because it is a comparatively strong acid whereas CH3COOH is a weak acid and contains lesser concentration of H+ ions.
Teacher's Note: Equal molarity does not mean equal H+; strength depends on how completely the acid ionises.
Exam Note: Name HCl and state complete ionisation (1 mark).
Question 2. Why CH3COOH is considered a weak acid whereas HCl is considered as a strong acid?
Solution.
CH3COOH is considered a weak acid because when diluted it does not get completely dissociated to liberate the H+ ions i.e. CH3COOH upon dilution liberates a very small amount of H+ ions and considered a weak acid. HCl on the other hand upon dilution dissociates completely to generate the H+ ions and liberates a huge amount of H+ ions per unit volume and hence, considered a strong acid.
Teacher's Note: Strength means degree of ionisation in water, not corrosiveness or concentration.
Exam Note: Contrast partial versus complete ionisation to score both marks.
Question 3. Which gas is evolved when dil. HCl reacts with metal bicarbonate? How is it recognized?
Solution.
Carbon dioxide gas is evolved when dil. HCl reacts with metal bicarbonate.
It could be recognized by bringing a burning matchstick to the area where the gas is evolved. It would be observed the matchstick will stop burning.
Teacher's Note: CO2 also turns lime water milky; a stronger test than the burning stick alone.
Exam Note: Write gas name plus one test; add lime water for safety.
Question 4. What effect does an increase in concentration of H+ (aq) ions in a solution have on the pH of a solution?
Solution.
The value of pH is inversely related with the concentration of hydrogen ions. Hence, when we increase the concentration of H+ (aq) ions in a solution the pH of the solution decreases.
Teacher's Note: pH and H+ concentration move in opposite directions on a logarithmic scale.
Exam Note: One-line answer: pH decreases; mention inverse relation.
Question 5. Name the gas evolved when dil. HCl reacts with an active metal. How is it recognized?
Solution.
When dil. HCl reacts with an active metal hydrogen gas is evolved.
It could be recognized by bringing a burning matchstick or candle towards the place from which the gas is being evolved, it would be observed that the matchstick would burn with a pop sound.
Teacher's Note: Do not confuse with CO2: hydrogen burns with a pop, CO2 extinguishes the flame.
Exam Note: Gas name and pop sound test carry the marks.
Question 6. Why does tooth decay start when the pH of mouth is lower than 5.5?
Solution.
When the pH of the mouth falls below 5.5 then our enamel which is composed of calcium phosphate gets corroded leading to tooth decay.
Teacher's Note: Enamel is calcium phosphate, the hardest body material, but acid below pH 5.5 dissolves it.
Exam Note: Link pH below 5.5 to enamel corrosion explicitly.
Question 7. How is the pH of a solution of an acid influenced when it is diluted?
Solution.
When a solution of an acid is diluted then, the concentration of H+ ions per unit volume in the solution reduces. Hence, any given sample of the solution now contains a lesser amount of H+ ions as it was present before dilution. Therefore, the pH of a solution of an acid upon dilution increases.
Teacher's Note: Dilution lowers ions per unit volume, so pH rises, but never above 7 for an acid.
Exam Note: State pH increases because H+ per unit volume falls.
Question 8. Fresh milk has a pH of 6. When it changes into curd (yoghurt), will its pH value increases or decreases? Why?
Solution.
Fresh milk has a pH of 6. When it changes into curd its pH will decrease as curd contains lactic acid making the curd comparatively more acidic in nature than the fresh milk.
Teacher's Note: Bacteria convert lactose to lactic acid, raising H+ and lowering pH below 6.
Exam Note: Say decreases, because lactic acid is formed.
Question 9. Arrange the pH values of 0, 2, 4 and 6 in the increasing value of H+ (aq) ions conc.?
Solution.
The smaller the pH the more the H+ (aq) ions concentration would be.
Hence, the pH values of 0, 2, 4 and 6 in the increasing value of H+ (aq) ions concentration is: -
6 < 4 < 2 < 0
Teacher's Note: Each pH unit is a tenfold change; lowest pH means highest H+.
Exam Note: Write the order starting from the highest pH.
Question 10. Why the flow of acid rainwater into a river make the survival of aquatic life in the river difficult?
Solution.
The aquatic life survives in an optimum pH value. It is difficult for the aquatic life to maintain their metabolism in a pH value greater or less than the optimum pH value. When acid rainwater flows into a river it makes the river water acidic and disturbs the pH from its optimum value due to which the survival of aquatic life in the river becomes difficult.
Teacher's Note: Acid rain has pH below 5.6; it lowers river pH beyond what aquatic organisms tolerate.
Exam Note: Mention pH change disturbing metabolism of aquatic organisms.
Question 11. Crystals of CuSO4 are heated in a test tube for some time.
(a) What is the colour of CuSO4 crystals:
(i) before heating, and
(ii) after heating?
(b) What is the source of liquid droplets seen on the inner upper side of the test tube during the heating process?
Solution.
a.
i. The colour of CuSO4 crystals before heating is blue.
ii. after heating the colour of CuSO4 crystals changes to white.
b. The source of liquid droplets seen on the inner upper side of the test tube during the heating process is the water of crystallization present in the formula unit of copper sulphate. These water of crystallization upon heating is removed from the formula unit and gets condensed on the inner upper side of the test tube during the heating process as liquid droplets.
Teacher's Note: Blue colour comes from 5 water molecules; adding water to white anhydrous salt restores blue.
Exam Note: Blue to white; droplets are water of crystallisation.
Question 12. (i) Name the products formed when NaHCO3 is heated.
(ii) Write the chemical equation for the reaction involved in the above.
Solution.
i. The products formed when NaHCO3 is heated are sodium carbonate, water and carbon dioxide.
ii. The chemical equation for the reaction involved above is:-
2NaHCO3 —(heat)→ Na2CO3 + H2O + CO2
Teacher's Note: Check balance: 2 Na on each side. The book's printed 2Na2CO3 was unbalanced and has been corrected.
Exam Note: Balanced equation with heat condition earns the full mark.
Question 13. Write the name and chemical formula of the calcium compound used for disinfecting drinking water. How is this compound manufactured?
Solution.
i. The name and chemical formula of the calcium compound used for disinfecting drinking water is:-
Chemical name - Calcium oxychloride (bleaching powder)
Formula - CaOCl2
ii. This compound is manufactured by the action of chlorine on dry slaked lime as per the following reaction:
Ca(OH)2 + Cl2 → CaOCl2 + H2O
Teacher's Note: Chlorine comes from the chlor-alkali process; the lime must be dry, not a solution.
Exam Note: Give name, formula CaOCl2, and the balanced equation.
Question 14. Show the decomposition of gypsum to P.O.P. and back interconversion of P.O.P. of gypsum.
Solution.
The decomposition of gypsum to Plaster Of Paris is as follows:-
CaSO4.2H2O —(373 K)→ CaSO4.½H2O + 1½H2O
Plaster of Paris is prepared by decomposing gypsum at 373K.
Interconversion of Plaster Of Paris into gypsum is as follows:-
CaSO4.½H2O + 1½H2O → CaSO4.2H2O
Teacher's Note: Gypsum loses 1½ water molecules; PoP sets by taking them back. The book printed 1 H2O; corrected to 1½.
Exam Note: Show both equations with water counts balanced.
Question 15. What happens when:
(a) CO2 is passed through lime water in a limited quantity?
(b) CO2 is passed through lime water in excess?
Solution.
a. When CO2 is passed through lime water in a limited quantity than calcium carbonate gets precipitated as a white colour mass at the bottom of the test tube according to the following reaction: -
Ca(OH)2 + CO2 → CaCO3 + H2O
b. When CO2 is passed through lime water in excess then the white precipitate initially formed gets dissolved forming Ca(HCO3)2 which is soluble in water as per the following reaction: -
CaCO3 + H2O + CO2 → Ca(HCO3)2
Teacher's Note: Milky then clear: students often forget the second reaction giving soluble bicarbonate.
Exam Note: Two observations and two equations, one for each part.
Question 16. Give a reason to explain why:
(a) bleaching powder smell strongly of chlorine?
(b) bleaching powder does not dissolve completely in water?
Solution.
a. Bleaching powder is produced by the action of chlorine on dry slaked lime according to the following reaction:-
Ca(OH)2 + Cl2 → CaOCl2 + H2O
Hence, bleaching powder smells strongly of chlorine. (On standing in air it slowly reacts with CO2 and releases chlorine.)
b. Bleaching powder does not dissolve completely in water because it is not a single pure compound. It is a mixture of calcium oxychloride (CaOCl2) with unreacted slaked lime, Ca(OH)2, which is only sparingly soluble in water. The undissolved lime remains as a residue.
Teacher's Note: Bleaching powder keeps releasing Cl2 from air; the insoluble part is excess slaked lime.
Exam Note: Part (b): mention mixture and sparingly soluble Ca(OH)2.
Question 17. What is the chemical formula for washing soda? How can it be obtained from baking soda? Describe two applications of washing soda.
Solution.
The chemical formula for washing soda is - Na2CO3.10H2O
It is prepared by heating baking soda and then recrystallizing the product so obtained.
The equations related to the above reaction are:-
2NaHCO3 —(heat)→ Na2CO3 + H2O + CO2
Na2CO3 + 10H2O → Na2CO3.10H2O
Two applications of washing soda are:-
1. It is used in glass, soap and paper industries
2. It is used for removing permanent hardness of water.
Teacher's Note: Washing soda has 10 water molecules of crystallisation; anhydrous sodium carbonate is not washing soda.
Exam Note: Formula, both equations, and two uses; marks per part.
Question 18. What is the difference between litmus solution indicator and universal indicator solution? How synthetic indicators differ from natural indicators?
Solution.
Litmus solution indicator just shows us whether the given sample is acidic or basic and tells us nothing about the strength of the acid or the base. Blue litmus solution turns red under acidic conditions; red litmus solution turns blue under basic/alkaline conditions.
On the other hand, universal indicator solution tells us or depicts through its colour exactly how much strong an acid or a base is. It has different colours as reference for different pH values from 0 to 14 indicating the strength of the acid or the base.
Natural indicators - The indicators which are prepared from natural substances are known as natural indicator.
Example - litmus, turmeric indicator.
Synthetic indicators - The artificial indicators which are prepared in the lab are known as synthetic indicators.
Example - Phenolphthalein, methyl orange etc.
Teacher's Note: Litmus gives only acid or base; universal indicator gives an approximate pH number through colour.
Exam Note: Answer in two contrasting pairs with one example each.
Question 19. What happens when:
(a) zinc reacts with NaOH
(b) zinc reacts with HCl?
Solution.
a. When zinc reacts with NaOH the following reaction takes place: -
2NaOH + Zn → Na2ZnO2 + H2
Hydrogen gas is evolved with the formation of the corresponding salt (sodium zincate).
b. When zinc reacts with HCl the following reaction takes place: -
2HCl + Zn → ZnCl2 + H2
Hydrogen gas is evolved with the formation of the corresponding salt.
Teacher's Note: Zinc reacts with both acid and base, showing amphoteric behaviour; both release hydrogen.
Exam Note: Write both balanced equations and name hydrogen gas.
Question 20. Give two characteristics each of acids and bases.
Solution.
Two characteristics of acids:-
i. Acids are sour in taste.
ii. They produce H+ ions upon dilution.
Two characteristics of bases:-
i. Bases are bitter in taste.
ii. They produce OH- ions upon dilution.
Teacher's Note: Acids turn blue litmus red; bases turn red litmus blue. Never taste chemicals in a lab.
Exam Note: Two points per category; one mark each pair.
Question 21. Explain chlor-alkali process. Why is it called so?
Solution.
When electricity is passed through an aqueous solution of sodium chloride (brine), it decomposes to form sodium hydroxide, chlorine and hydrogen. This process is called chlor-alkali process.
2NaCl + 2H2O → 2NaOH + Cl2 + H2
It is called so because the products formed in the reaction are chlorine and sodium hydroxide. Here chlor stands for chlorine and alkali is for sodium hydroxide.
Teacher's Note: Chlorine forms at the anode, hydrogen at the cathode, NaOH stays in solution.
Exam Note: Give equation with all three products and name origin.
Question 22. Give reason why:
(a) water should not be added to concentrated acid?
(b) antacids are required when there is pain or irritation in the stomach?
(c) Baking soda should be rubbed on bee-stung area?
Solution.
a. Water should not be added to concentrated acid because the process of dissolving an acid or a base in water is a highly exothermic one. If water is added to an acid then the heat generated may cause the acid to splash out and cause burns.
b. Pain or irritation is caused in our stomach when there is production of an excess amount of acid in our body. Antacids are basic in nature. Hence antacids are required when there is pain or irritation in the stomach to neutralize the effect of the excess acid.
c. Bee-sting injects acid in our body. Baking soda is a base. Hence, baking soda should be rubbed on bee-stung area to neutralize the effect of the acid.
Teacher's Note: Remember the rule: always add acid to water slowly, never water to acid.
Exam Note: One reason per part; use neutralisation and exothermic.
Question 23. What is meant by water of crystallisation? Name four such salts which contain water of crystallisation in them. Why P.O.P. is written as CaSO4.½H2O?
Solution.
Water of crystallization is the fixed number of water molecules present in one formula unit of a substance.
Four salts which contain water of crystallization are - copper sulphate, gypsum, Plaster of Paris, washing soda.
P.O.P. is written as CaSO4.½H2O because two formula units of CaSO4 share one molecule of water.
Teacher's Note: Water of crystallisation is chemically bound in fixed ratio, unlike moisture on the surface.
Exam Note: Define, name four salts, explain the half water molecule.
Question 24. Why NaHCO3 is used in soda-acid fire extinguisher as well as for making baking powder.
Solution.
When NaHCO3 is heated or mixed with water a reaction takes place which leads to the evolution of carbon dioxide gas. Now carbon dioxide extinguishes fire very well hence, it is used in soda-acid fire extinguisher and also the carbon dioxide produced during the reaction causes the bread or cake to rise making them soft and spongy. Hence, NaHCO3 is used for making baking powder.
Teacher's Note: In the extinguisher it reacts with sulphuric acid; in baking powder with tartaric acid.
Exam Note: Both uses depend on CO2 release; say so clearly.
Question 25. Give reason why:
(a) tartaric acid is added while making baking powder?
(b) bleaching powder is used for disinfecting drinking water?
(c) strong acid and concentrated acid do not mean the same thing?
Solution.
a. While making baking powder tartaric acid is added to it because when this mixture is heated or mixed with water carbon dioxide gas is evolved which causes the bread or cake to rise making them spongy and soft. (Tartaric acid neutralises the sodium carbonate formed, which would otherwise taste bitter.)
b. Bleaching powder is used for disinfecting drinking water because bleaching powder is an oxidizing agent and helps in removing or killing the germs.
c. Strong acid means those acids which give a very high H+ ion concentration upon dilution or those which are able to generate a greater amount of H+ ions per unit quantity whereas concentrated acid means how many moles of the acid is present in a given quantity of a solvent. Higher concentration means greater amount of the acid per unit of the solvent.
Teacher's Note: Strength is about ionisation; concentration is about quantity dissolved. A dilute strong acid exists.
Exam Note: Part (c): strength is ionisation, concentration is amount per volume.
Comprehensive Exercises (MCQ)
Question 1. With the increase in the concentration of hydrogen ions, the pH value will:
A. Increase
B. Decrease
C. Remain constant
D. Remain fluctuating
Solution.
Answer: B (Decrease). The value of pH is inversely related with the concentration of hydrogen ions. Hence, if the concentration of hydrogen ions increases then pH decreases.
Teacher's Note: pH = -log[H+], so more H+ gives a smaller number.
Exam Note: Inverse relation; pick B without hesitation.
Question 2. The colour of pH paper strip at the pH valued of 1, 7, and 14 will be:
A. Green, red and blue
B. Red, green and blue
C. Blue, green and red
D. Green, blue and red
Solution.
Answer: B (Red, green and blue). At the pH value of 1 the pH paper strip is Red, at the pH value of 7 the pH paper strip is green and at the pH value of 14 the pH paper strip is blue in colour.
Teacher's Note: Acid red, neutral green, strong base blue-violet on the universal indicator scale.
Exam Note: Match colours in order of increasing pH.
Question 3. Which of the following is a strong acid?
A. Ethanoic acid
B. Citric acid
C. Tartaric acid
D. Sulphuric acid
Solution.
Answer: D (Sulphuric acid). Sulphuric acid is a strong acid amongst all of the above.
Teacher's Note: Organic acids like ethanoic, citric and tartaric are weak; mineral acids are strong.
Exam Note: Strong acids: HCl, HNO3, H2SO4.
Question 4. Which of the following is a weak acid?
A. Ethanoic acid
B. Nitric acid
C. Sulphuric acid
D. Hydrochloric acid
Solution.
Answer: A (Ethanoic acid). Except ethanoic acid all are strong acids.
Teacher's Note: Ethanoic acid ionises only slightly in water, so it is weak.
Exam Note: Remember the three mineral acids as strong.
Question 5. Which of the following is a mineral acid?
A. Citric acid
B. Lactic acid
C. Oxalic acid
D. Nitric acid
Solution.
Answer: D (Nitric acid). Except nitric acid, all the others could be obtained from edible substances.
Teacher's Note: Mineral acids come from minerals; organic acids come from living things.
Exam Note: Mineral acids: HCl, HNO3, H2SO4.
Question 6. Which of the following contains oxalic acid?
A. Sour milk
B. Orange
C. Tomato
D. Tamarind
Solution.
Answer: C (Tomato). Tomato contains oxalic acid.
Teacher's Note: Sour milk: lactic acid; orange: citric; tamarind: tartaric; tomato: oxalic.
Exam Note: Memorise natural source of each acid in a table.
Question 7. The compound which is used in glass, soap and paper industries is:
A. Washing soda
B. Baking soda
C. Lime water
D. Bleaching powder
Solution.
Answer: A (Washing soda). Washing soda has extensive uses and is used in glass, soap and paper industries.
Teacher's Note: Washing soda is Na2CO3.10H2O; it also removes permanent hardness.
Exam Note: Do not confuse washing soda with baking soda.
Question 8. The formula of Gypsum and Plaster of Paris is:
A. CaSO4.2H2O and CaSO4.1½H2
B. CaSO4.2H2O and CaSO4.½H2O
C. CaSO4 and CaSO4.½H2O
D. CaSO4.2H2O and CaSO4.3H2O
Solution.
Answer: B. The formula of Gypsum is CaSO4.2H2O and Plaster of Paris having formula CaSO4.½H2O is obtained upon heating gypsum.
Teacher's Note: Gypsum 2H2O, PoP half H2O; the water count drops on heating at 373 K.
Exam Note: Check the half water molecule in PoP.
Question 9. The compound which is used as an oxidizing agent in many chemical industries is:
A. Bleaching powder
B. Washing powder
C. Baking powder
D. Quicklime
Solution.
Answer: A (Bleaching powder). Bleaching powder is used as an oxidizing agent in many chemical industries.
Teacher's Note: Bleaching powder also bleaches cotton and disinfects water through its oxidising action.
Exam Note: Link bleaching powder with oxidising agent.
Question 10. The compound which is used for removing permanent hardness of water is:
A. NaHCO3
B. CuSO4.5H2O
C. Na2CO3
D. Na2CO3.10H2O
Solution.
Answer: D (Na2CO3.10H2O). Na2CO3.10H2O, commonly known as washing soda, is used for removing permanent hardness of water.
Teacher's Note: The 10H2O hydrate is washing soda, the commercial form; anhydrous Na2CO3 is soda ash.
Exam Note: Washing soda is the hydrated form.
Question 11. Common salt besides being used in kitchen can also be used as the raw material for making:
(i) washing soda
(ii) bleaching powder
(iii) baking soda
(iv) slaked lime
A. (i) and (ii)
B. (i), (ii) and (iv)
C. (i) and (iii)
D. (i), (iii) and (iv)
Solution.
Answer: None of the printed options is fully correct; the correct set is (i), (ii) and (iii). Common salt is the raw material for washing soda, baking soda (Solvay process) and, through chlor-alkali chlorine, bleaching powder. Slaked lime is made from limestone, not from common salt, so (iv) is wrong.
Teacher's Note: Chlor-alkali gives Cl2 for bleaching powder and NaOH for washing soda.
Exam Note: Exclude slaked lime; it comes from limestone.
Question 12. Which of the following are present in a dilute aqueous solution of hydrochloric acid?
A. H3O+ + Cl–
B. H3O+ + OH–
C. Cl– + OH–
D. Unionised HCl
Solution.
Answer: A (H3O+ + Cl–). When HCl is added to water it is dissociated to give H+ ions which combine with water molecules to give H3O+ and Cl– remains after the dissociation in the solution.
Teacher's Note: H+ cannot exist alone in water; it attaches to water forming hydronium.
Exam Note: Option A is meant to read H3O+.
Question 13. Which of the following statements is correct about an aqueous solution of an acid and of a base?
(i) Higher the pH, stronger the acid
(ii) Higher the pH, weaker the acid
(iii) Lower the pH, stronger the base
(iv) Lower the pH, weaker the base
A. (i) and (iii)
B. (ii) and (iii)
C. (i) and (iv)
D. (ii) and (iv)
Solution.
Answer: D ((ii) and (iv)). The value of pH is inversely related with the concentration of hydrogen ions. Hence, higher the pH, weaker the acid and lower the pH, weaker the base.
Teacher's Note: For acids, low pH means strong; for bases, high pH means strong.
Exam Note: Test each statement separately before choosing.
Question 14. Sodium carbonate is a basic salt because it is a salt of:
A. Strong acid and strong base
B. Weak acid and weak base
C. Strong acid and weak base
D. Weak acid and strong base
Solution.
Answer: D (Weak acid and strong base). A basic salt is formed when a strong base (NaOH) combines with a weak acid (carbonic acid).
Teacher's Note: The stronger parent decides the salt's nature when dissolved in water.
Exam Note: Salt of weak acid and strong base is basic.
Question 15. Calcium phosphate is present in tooth enamel. Its nature is:
A. Basic
B. Acidic
C. Neutral
D. Amphoteric
Solution.
Answer: A (Basic). Calcium phosphate which is present in tooth enamel is basic in nature because the acid produced by the bacteria in our mouth easily corrodes it.
Teacher's Note: Basic enamel is neutralised by acids from bacteria; toothpaste is basic to help.
Exam Note: Link basic enamel to acid attack.
Question 16. A sample of soil is mixed with water and allowed to settle. The clear supernatant solution turns the pH paper yellowish-orange. Which of the following would change the colour of this pH paper to greenish-blue?
A. Lemon juice
B. Vinegar
C. Common salt
D. An antacid
Solution.
Answer: D (An antacid). The yellowish-orange colour means the solution is acidic. Antacids are basic in nature. Hence, if an antacid is added it would raise the pH and change the colour of this pH paper to greenish-blue.
Teacher's Note: Yellowish-orange means weakly acidic; greenish-blue means weakly basic, so add a base.
Exam Note: Choose a base; salt is neutral.
Question 17. Which of the following gives the correct increasing order to acidic strength?
A. Water < Acetic acid < Hydrochloric acid.
B. Water < Hydrochloric acid < Acetic acid
C. Acetic acid < Water < Hydrochloric acid
D. Hydrochloric acid < Water < Acetic acid
Solution.
Answer: A. Water is normally neutral, acetic acid is a weak acid and Hydrochloric acid is a strong acid. Hence, the above order.
Teacher's Note: Neutral water, weak acetic acid, then strong HCl in increasing acidity.
Exam Note: Order neutral, weak, strong.
Question 18. What happens when a solution of an acid is mixed with a solution of a base in a test tube?
(i) The temperature of the solution increases
(ii) The temperature of the solution decreases
(iii) The temperature of the solution remains the same
(iv) Salt formation takes place
A. (i) only
B. (i) and (iii)
C. (ii) and (iii)
D. (i) and (iv)
Solution.
Answer: D ((i) and (iv)). When a solution of an acid is mixed with a solution of a base then the temperature of the solution increases as it is an exothermic reaction and the corresponding salt formation takes place.
Teacher's Note: Neutralisation is exothermic and gives salt plus water.
Exam Note: Neutralisation: heat released, salt formed.
Comprehensive Exercises (T/F)
Question 1. Write true or false for the following statements:
The separation of H+ ion from HCl molecules can occur in the absence of water.
Solution.
Answer: False. The separation of H+ ion from HCl molecules cannot occur in the absence of water. As in the absence of any solvent, the H+ would not be able to dissociate from its formula mass.
Teacher's Note: Dry HCl gas does not turn dry blue litmus red; water is essential.
Exam Note: False: acids ionise only in water.
Question 2. Write true or false for the following statements:
Acids give H3O+ or H+(aq) ion in water.
Solution.
Answer: True. A substance is called an acid if it has the ability to produce H+ ions in the solution. These H+ ions combine with water molecules to give H3O+. Hence, acids give H3O+ or H+(aq) ion in water is correct.
Teacher's Note: H+(aq) and H3O+ are two ways of writing the same species.
Exam Note: True: both notations are accepted.
Question 3. Write true or false for the following statements:
The process of dissolving an acid or a base in water is highly exothermic one.
Solution.
Answer: True. The process of dissolving an acid or a base in water is highly exothermic one as a huge amount of heat is evolved during the process.
Teacher's Note: Heat release explains the safety rule for diluting concentrated acids.
Exam Note: True; link to adding acid to water.
Question 4. Write true or false for the following statements:
Care must be taken while mixing concentrated nitric acid or sulphuric acid with water. The water must always be added slowly to the acid with constant stirring.
Solution.
Answer: False. The process should be that acid must be added slowly to water with constant stirring. If water is added slowly to the acid with constant stirring then due to the exothermic reaction going on the acid might splash away from the beaker causing burns.
Teacher's Note: The first sentence is true; the second is reversed. Check statements fully.
Exam Note: False: acid goes into water, not reverse.
Question 5. Write true or false for the following statements:
Mixing an acid or base with water results in increase in the concentration of ions (H3O+/OH–) per unit volume.
Solution.
Answer: False. Mixing an acid or base with water results in a decrease in the concentration of ions (H3O+/OH–) per unit volume, because the solution is diluted. (The book gives True, but dilution reduces ion concentration per unit volume.)
Teacher's Note: Dilution spreads the same ions through more volume, so concentration per unit volume falls.
Exam Note: Dilution lowers ion concentration; mark False.
Question 6. Write true or false for the following statements:
The universal indicator shows same colour at different concentrations of hydrogen ions in a solution.
Solution.
Answer: False. The universal indicator shows different colours at different concentrations of hydrogen ions in a solution.
Teacher's Note: That colour variation is what lets universal indicator estimate pH.
Exam Note: False: different colours for different pH.
Question 7. Write true or false for the following statements:
On the pH scale, we can measure pH from 0 (very acidic) to 14 (very alkaline).
Solution.
Answer: True. pH scale is being made to act as a reference to check the acidity or basicity of a substance and it shows or measures the pH from 0 (very acidic) to 14 (very alkaline).
Teacher's Note: Values below 0 or above 14 exist but are outside the NCERT scale.
Exam Note: True; neutral is 7.
Question 8. Write true or false for the following statements:
Higher is the hydronium ion concentration, higher is the pH value.
Solution.
Answer: False. The value of pH is inversely related with the concentration of hydrogen ions. Hence, higher is the hydronium ion concentration, lower will be the pH value.
Teacher's Note: pH falls as hydronium concentration rises; the relation is inverse.
Exam Note: False: higher H3O+ gives lower pH.
Question 9. Write true or false for the following statements:
Acids that give rise to more H+ ions are said to be strong acids, and acids that give less H+ ions are said to be weak acids.
Solution.
Answer: True. Acidity of a substance is measured with respect to the number of H+ ions it can generate. Acids that give rise to more H+ ions are said to be strong acids, and acids that give less H+ ions are said to be weak acids.
Teacher's Note: Strength depends on ions produced per molecule dissolved, not on how much acid is used.
Exam Note: True: strength follows H+ produced.
Question 10. Write true or false for the following statements:
When the pH of rainwater is more than 5.6, it is called acid rain.
Solution.
Answer: False. When the pH of rainwater is less than 5.6, it is called acid rain.
Teacher's Note: Normal rain is slightly acidic (about 5.6) due to dissolved CO2.
Exam Note: False: acid rain is below 5.6.
Free study material for Science
Download Evergreen Solutions for Class 10 Math PDF
Download Evergreen Solutions for Class 10
Access the complete chapter-wise PDF for Evergreen Solutions Class 10 Science Chapter 2 Acids Base And Salts. These structured Evergreen Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.