Official Textbook Solutions: Class 10 Science Chapter 04 Carbon And Its Compounds
Review structured textbook solutions for Class 10 Science Chapter 04 Carbon And Its Compounds prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Science: Chapter 04 Carbon And Its Compounds
Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Check Point 01
Question 1. What do you mean by covalent bonding?
Solution.
The bonding in which atoms mutually share the electron pair(s) to form molecules is called covalent bonding.
Example: Hydrogen molecule. In hydrogen molecule, both the electrons are shared to form a covalent bond.
Another very common example is the water molecule:
In water molecule, the two single hydrogen & oxygen bonds are formed.
Teacher's Note: Covalent bonds form when atoms share electron pairs; hydrogen shares one pair and oxygen shares two pairs in water.
Exam Note: Covalent bond: sharing of electron pairs.
Question 2. An element X which has 6 electrons in its outermost shell, require 2 electrons to complete its octet for attaining noble gas configuration. X is an essential element for the survival of all living beings. What is X?
Solution.
The element X is oxygen. The atomic number is 8, and its electronic configuration is 2,6. Oxygen is used for respiration by the living beings.
Teacher's Note: An element with six outer electrons needing two more to complete its octet is oxygen, atomic number 8.
Exam Note: Oxygen: configuration 2,6; needs 2 electrons.
Question 3. (i) The main constituent of marsh gas is ……….
(ii) In case of a water molecule, hydrogen acquires a ………. configuration.
Solution.
(i) Methane
Explanation:
Marsh gas is a mixture of methane (CH4), hydrogen sulfide (H2S) and carbon dioxide (CO2).
(ii) Duplet (helium-like) configuration.
Explanation:
The water molecule is chemically written as:
H—O—H
Each hydrogen atom shares its one electron with oxygen, so hydrogen has two electrons in its shell (the duplet configuration of helium).
Teacher's Note: Marsh gas is mainly methane. Hydrogen in water shares one electron and attains the two-electron duplet.
Exam Note: Hydrogen attains duplet; marsh gas is methane.
Question 4. Write the covalent bonding in nitrogen.
Solution.
Nitrogen has the electronic configuration 2, 5. It shares 3 of the outermost electrons with another nitrogen atom to form a triple-bonded N2 molecule, as shown below:
Teacher's Note: Each nitrogen atom has five outer electrons and shares three pairs, forming the triple bond N≡N.
Exam Note: Nitrogen molecule: triple bond, three shared pairs.
Question 5. Why covalent compound are volatile in nature with low boiling and low melting point?
Solution.
Covalent compounds have strong forces of attraction within the molecule, but the inter-molecular forces are very small due to which they are volatile. This results in the low melting and boiling point of compounds making them volatile.
Teacher's Note: Strong bonds inside covalent molecules, but weak forces between molecules, give low melting and boiling points.
Exam Note: Weak intermolecular forces mean low melting points.
Question 6. Give two differences between ionic and covalent compounds.
Solution.
Two differences between ionic and covalent compounds:
| Ionic compounds | Covalent compounds |
|---|---|
| Formed by complete transfer of electrons from one atom to another | Formed by mutual sharing of electrons between atoms |
| High melting and boiling point | Low melting and boiling point |
| Example, NaCl (Sodium Chloride) | Example, CO₂ (carbon dioxide) |
Teacher's Note: Ionic compounds form by electron transfer and have high melting points; covalent compounds share electrons and melt easily.
Exam Note: Ionic: transfer, high m.p. Covalent: sharing, low m.p.
Check Point 02
Question 1. Write the two examples of the crystalline form of carbon.
Solution.
In the crystalline form of carbon, many atoms are bonded together in a repeating pattern. The arrangement of atoms in the crystal differs for each form of carbon. Two forms are:
i. Diamond.
Each carbon atom is covalently bonded to four other carbon atoms. The arrangement of carbon atoms (cubic unit cell) is shown below:
ii. Fullerene:
Each sphere contains 60 carbon atoms, and each carbon atom is bonded to three others by covalent bonds.
Teacher's Note: Diamond and fullerene are crystalline allotropes of carbon with different arrangements of the same carbon atoms.
Exam Note: Allotropes: diamond, graphite, fullerene (C-60).
Question 2. Draw the structure of diamond.
Solution.
In diamond, each carbon atom is covalently bonded to four other carbon atoms.
The crystal structure (cubic unit cell) is shown below:
Diamond has a 3D structure.
Teacher's Note: In diamond each carbon is bonded to four others, forming a rigid three-dimensional network.
Exam Note: Diamond: each C bonded to four C atoms.
Question 3. Why is graphite smooth?
Solution.
In graphite, each carbon atom is bonded to 3 other carbon atoms in the same plane giving rise to a hexagonal array. The structure of graphite is formed by stacking these hexagonal layers over one another and these layers have weak inter-molecular forces.
This structure results in the smoothness of graphite.
Teacher's Note: Graphite has hexagonal layers held together weakly, so the layers slide over each other easily.
Exam Note: Graphite: layers slide, hence slippery and soft.
Question 4. How do diamond can be prepared artificially?
Solution.
Diamonds can be prepared artificially by subjecting pure carbon to a very high temperature and pressure.
The main steps of the process are shown below:
Teacher's Note: Diamonds can be made artificially by subjecting carbon to extremely high pressure and temperature.
Exam Note: Artificial diamond: very high pressure and temperature.
Question 5. Give two differences between ionic and covalent compounds.
Solution.
Two differences between ionic and covalent compounds:
| Ionic compounds | Covalent compounds |
|---|---|
| High melting and boiling point | Low melting and boiling point |
| Conduct electricity in the aqueous or molten state | Do not conduct electricity in the aqueous or molten state |
Teacher's Note: Ionic compounds conduct electricity when molten or dissolved in water, but covalent compounds do not, having no ions.
Exam Note: Ionic conduct when molten; covalent do not.
Question 6. Diamond is a covalent solid, yet has a high melting point. Why?
Solution.
Diamond has a rigid 3D structure in which each carbon atom is covalently bonded to 4 other carbon atoms. This structure involves a network of strong C-C bonds which requires high energy to break the bonds. Hence, the diamond has a high melting point.
Teacher's Note: Diamond is a network of strong C–C bonds, so a great deal of energy is needed to melt it.
Exam Note: Strong 3D network gives diamond high melting point.
Check Point 03
Question 1. What do you mean by catenation?
Solution.
The ability of an element to form bonds with other atoms of the same element is called catenation.
The different types of bond chains are:
Teacher's Note: Catenation is the self-linking property of carbon, producing straight chains, branched chains and rings.
Exam Note: Catenation: carbon bonding with itself.
Question 2. Why does carbon form a large number of compounds?
Solution.
Carbon forms a large number of compounds because (a) Carbon exhibits catenation to a very large extent. It can form long chains, branched chains or ring structures.
(b) Carbon has a valency of 4. It is satisfied by forming single, double or triple bonds with carbon or other elements such as oxygen, hydrogen, nitrogen etc. The bonds formed are strong and hence the compounds formed are stable.
Teacher's Note: Carbon forms many compounds through catenation and tetravalency, giving stable single, double and triple bonds.
Exam Note: Catenation and tetravalency explain many carbon compounds.
Question 3. Differentiate between saturated and unsaturated hydrocarbons.
Solution.
Differences between saturated and unsaturated hydrocarbons:
| Saturated hydrocarbons | Unsaturated hydrocarbons |
|---|---|
| Compounds in which all the carbon-carbon bonds are single bonds | Compounds in which at least one carbon-carbon bond is a double or triple bond |
| Generally not very reactive. Shows substitution reaction(s) | More reactive than saturated hydrocarbons. Responds to addition reaction(s) |
| Burns with clean flame in sufficient amounts of oxygen | Burns with sooty flame in sufficient amounts of oxygen. |
Teacher's Note: Saturated hydrocarbons have only single bonds; unsaturated ones have a double or triple bond and are more reactive.
Exam Note: Saturated: single bonds. Unsaturated: double or triple bond.
Question 4. Write the electron dot structure of C3H8.
Solution.
C3H8 contains 3 carbon atoms and 8 hydrogen atoms.
Now, each carbon atom has 4 electron and each hydrogen atom has 1 electron each. So, in total 3×4 + 1×8 = 12 + 8 = 20 electrons.
And, 1 single bond = 2 electrons.
∴ 10 single bonds.
There now plot the electrons on the atoms as shown, and then join the single bonds.
This is the final structure of propane i.e. C3H8
Teacher's Note: Propane has 20 valence electrons, giving 10 shared pairs: 2 C–C bonds and 8 C–H bonds.
Exam Note: C3H8: 10 single bonds, 20 electrons.
Check Point 04
Question 1. Write the structural formulae of all the isomers of an alkane with seven C- atoms (C7H16)
Solution.
There are 9 isomers for heptane (C7H16):
a. 2-methyl hexane (isoheptane)
CH₃–CH(CH₃)–CH₂–CH₂–CH₂–CH₃
b. n-heptane
CH₃–CH₂–CH₂–CH₂–CH₂–CH₂–CH₃
c. 3-methylhexane
CH₃–CH₂–CH(CH₃)–CH₂–CH₂–CH₃
d. 2,2-dimethylpentane
CH₃–C(CH₃)₂–CH₂–CH₂–CH₃
e. 2,3-dimethylpentane
CH₃–CH(CH₃)–CH(CH₃)–CH₂–CH₃
f. 2,4-dimethylpentane
CH₃–CH(CH₃)–CH₂–CH(CH₃)–CH₃
g. 3,3-dimethylpentane
CH₃–CH₂–C(CH₃)₂–CH₂–CH₃
h. 2,2,3-trimethylbutane
CH₃–C(CH₃)₂–CH(CH₃)–CH₃
i. 3-ethylpentane
CH₃–CH₂–CH(CH₂CH₃)–CH₂–CH₃
Teacher's Note: Heptane has nine structural isomers, which have the same formula C7H16 but different carbon skeletons.
Exam Note: Heptane: nine isomers.
Question 2. What is meant by homologous series?
Solution.
A series of compounds in which the same functional group substitutes for the hydrogen in a carbon chain is called homologous series.
Example: Methane (CH4) and ethane (C2H6).
These are a part of homologous series & the difference among these molecules is that they have different numbers of CH2 groups.
Teacher's Note: A homologous series is a family of compounds with the same functional group, successive members differing by CH2.
Exam Note: Homologous series: successive members differ by CH2.
Question 3. (i) The gradual change in the physical properties occurs with increase in the ……..
(ii) IUPAC stands for…..
Solution.
(i) Molecular mass
(ii) International Union of Pure and Applied Chemistry
Teacher's Note: Properties change gradually with molecular mass in a homologous series; IUPAC is the body that names compounds.
Exam Note: IUPAC: International Union of Pure and Applied Chemistry.
Question 4. What are primary and secondary suffixes as applied to IUPAC nomenclature?
Solution.
In IUPAC nomenclature, the following subdivision is followed for naming the compounds.
| Part of the name | Meaning |
|---|---|
| Root word | Number of carbon atoms in the main chain |
| Suffix: Primary suffix | Nature of the carbon chain |
| Suffix: Secondary suffix | Functional group |
| Prefix | Substituents attached to the chain |
Primary suffixes are used to indicate the degree of unsaturation (i.e., presence of double or triple bonds) in a carbon compound.
e.g.: -ane (for alkanes), -ene (for alkenes), -yne (for alkynes)
Secondary suffixes are those suffixes which describe the main functional group of the compound. They are added after the primary suffix.
e.g.: -one (for ketones), -oic acid (for carboxylic acids)
Example:
Pentan-2-ol, CH₃–CH(OH)–CH₂–CH₂–CH₃
| Root word | Primary suffix | Secondary suffix | Position of functional group |
|---|---|---|---|
| Pent | an(e) | ol | 2 |
Teacher's Note: IUPAC names use a root word, prefix and suffixes: the primary suffix shows saturation, the secondary the functional group.
Exam Note: Primary suffix: bond type. Secondary suffix: functional group.
Check Point 05
Question 1. Which type of hydrocarbon gives sooty flame after burning?
Solution.
Unsaturated hydrocarbons give sooty flame after burning even in sufficient amount of oxygen. Saturated hydrocarbons may give sooty flame upon burning if there is limited supply of oxygen.
Teacher's Note: Unsaturated hydrocarbons burn with a sooty yellow flame because their carbon content is high and combustion is incomplete.
Exam Note: Unsaturated hydrocarbons give a sooty flame.
Question 2. (i) Alcohols are converted into carboxylic acid only under ……….
(ii) In partial oxidation; alcohols are converted into …………..
Solution.
(i) complete oxidation (in the presence of strong oxidizing agents like acidified potassium dichromate)
(ii) aldehydes
Teacher's Note: Strong oxidising agents oxidise alcohols fully to carboxylic acids, while partial oxidation gives aldehydes.
Exam Note: Alcohol: partial oxidation gives aldehyde.
Question 3. Give an example for the test of unsaturation.
Solution.
Bromine water can be used for the test of unsaturation. If bromine water which is brown in colour is added to unsaturated compounds, then bromine water gets decolourised as a result of addition reaction.
Saturated compounds do not decolourise bromine water.
Example:
Alkene: >C=C< + Br₂ (orange) → –CBr–CBr– (colourless)
Alkyne: –C≡C– + 2Br₂ (orange) → –CBr₂–CBr₂– (colourless)
Teacher's Note: Bromine water is decolourised by unsaturated compounds through an addition reaction, but not by saturated ones.
Exam Note: Bromine water decolourised: unsaturation.
Question 4. Why compounds like petrol, coal, etc generate heat or light or both on combustion?
Solution.
Combustion is the process of burning of a substance in the presence of oxygen. The fuel (coal or petroleum) gets oxidized. As a result, the bonds present in the molecules of fuel break, releasing energy. Sometimes, the energy released falls in the visible range of the electromagnetic spectrum (which means the energy released is visible to human eye) which we call as light. Sometimes the energy released falls under infrared region, which we commonly call as heat. Basically, the compounds generate heat or light or both due to the release of energy from the breaking of molecular bonds.
Teacher's Note: Burning fuels break bonds and release energy as heat and light, because new products are more stable.
Exam Note: Combustion releases heat and light.
Check Point 06
Question 1. What happens when ethyl alcohol reacts with sodium metal?
Solution.
When ethyl alcohol reacts with sodium metal, hydrogen gas is liberated along with the formation of sodium ethoxide.
2CH₃CH₂OH + 2Na → 2CH₃CH₂O⁻Na⁺ + H₂↑ (sodium ethoxide)
Teacher's Note: Ethanol reacts with sodium to give sodium ethoxide and hydrogen gas, showing alcohols are slightly acidic.
Exam Note: Ethanol + sodium gives sodium ethoxide + hydrogen.
Question 2. Give any two examples of chemicals that are added to denature the alcohol.
Solution.
Methanol and acetone are added to denature the alcohol to prevent the misuse of alcohol.
Teacher's Note: Denaturing makes industrial alcohol unfit to drink by adding poisonous or unpleasant substances like methanol.
Exam Note: Denatured alcohol is unfit for drinking.
Question 3. Mention two uses of ethanoic acid.
Solution.
Ethanoic acid is used as a preservative in pickles.
It is also used in the production of esters which are used in making perfumes and as flavouring agents.
Teacher's Note: Ethanoic acid is used as a food preservative in pickles and to make esters for perfumes and flavours.
Exam Note: Ethanoic acid: preservative; esters for perfumes.
Question 4. Why soap solution appears cloudy?
Solution.
When soap is added to water, it forms clusters of molecules called micelles. These soap micelles are large enough to scatter light and therefore makes the soap solution cloudy.
Teacher's Note: Soap molecules form micelles in water; these clusters are large enough to scatter light and look cloudy.
Exam Note: Micelles scatter light; soap solution looks cloudy.
Chapter Exercise
Question 1. Which allotrope of carbon is soft, greasy and is used as solid lubricant for heavy machinery operating at a high temperature?
Solution.
Graphite is the allotrope of carbon used for lubrication purposes.
Teacher's Note: Graphite is soft, slippery and withstands high temperatures, so it is used as a solid lubricant.
Exam Note: Graphite: solid lubricant.
Question 2. Which property of diamond allows it to be used in knives for cutting marble?
Solution.
Diamond is the hardest naturally occurring substance in the world. Its hardness is made use of in making knives to cut marbles.
Teacher's Note: Diamond is the hardest natural substance, so it can cut hard materials like marble.
Exam Note: Diamond: hardest natural substance.
Question 3. Which of the following are alkenes?
CH4, C2H6, C2H4, C3H6 and C3H8
Solution.
The general formula of alkenes is CnH2n, where ‘n’ is the number of carbon atoms.
Here, C2H4 and C3H6 are alkenes (put n=2, 3)
Teacher's Note: Alkenes have the general formula CnH2n, so C2H4 and C3H6 are alkenes.
Exam Note: Alkene formula: CnH2n.
Question 4. In order to form a branched organic compound, what should be the minimum number of carbon atoms?
Solution.
The minimum number of carbon atoms to form a branched compound should be 4; 3 in the parent chain and 1 in the branched chain. The compound is 2-methylpropane (isobutane).
CH₃–CH(CH₃)–CH₃
Teacher's Note: A branched compound needs at least four carbons: a three-carbon chain with one carbon branch, as in isobutane.
Exam Note: Minimum four carbons for branching.
Question 5. Which of the following two organic compounds belong to the same homologous series?
C2H6, C2H6O, C2H6O2, CH4O
Solution.
CH4O, C2H6O belong to the same homologous series as they differ only by a –CH2 unit.
Teacher's Note: Members of one homologous series differ by CH2; CH4O and C2H6O are both alcohols and differ by CH2.
Exam Note: Same series: differ by CH2 and same group.
Question 6. How two successive members of a homologous series differ from each other?
Solution.
The successive members of a homologous series differ by a –CH2 unit.
Teacher's Note: Successive members of a homologous series differ by a CH2 unit, which is 14 mass units.
Exam Note: Successive members differ by CH2.
Question 7. What is the common name of this compound
CH₃–CH₂–CH₂–Cl (C₃H₇Cl)
Solution.
Propyl chloride
Teacher's Note: CH3CH2CH2Cl is a chloro-derivative of propane, commonly called propyl chloride, with IUPAC name 1-chloropropane.
Exam Note: Propyl chloride = 1-chloropropane.
Question 8. Draw the structural formula of ethyl ethanoate.
Solution.
CH₃–C(=O)–O–CH₂–CH₃
The molecular formula is C4H8O2.
Teacher's Note: Ethyl ethanoate is an ester formed from ethanoic acid and ethanol, with the formula C4H8O2.
Exam Note: Ethyl ethanoate: CH3COOC2H5, C4H8O2.
Question 9. Complete the following reaction,
CH₂=CH₂ + Cl₂ →
Solution.
This is an example of addition reaction.
CH₂=CH₂ + Cl₂ → CH₂Cl–CH₂Cl (1,2-dichloroethane)
Teacher's Note: Ethene adds chlorine across its double bond to form 1,2-dichloroethane; this is an addition reaction.
Exam Note: Alkenes undergo addition reactions.
Question 10. Which functional group can be detected by using sodium hydrogen carbonate test?
Solution.
Carboxylic acid (-COOH) can be detected by using sodium hydrogen carbonate (NaHCO3) test. Treating a carboxylic acid with NaHCO3 causes effervescence due to the liberation of carbon dioxide (CO2). The reaction is as follows: R-COOH + NaHCO3→ R-COONa + CO2 + H2O
Teacher's Note: Carboxylic acids react with sodium hydrogen carbonate to release carbon dioxide, seen as brisk effervescence.
Exam Note: NaHCO3 test: effervescence shows -COOH.
Question 11. Graphite is a covalent molecule but a good conductor of electricity. Why?
Solution.
In graphite, each carbon is covalently bonded to 3 other carbon atoms in a hexagonal arrangement. That is 3 out of 4 valence electrons are used for covalent bonding. The remaining 1 electron from each carbon atom is free (or delocalized). This free electron helps in the conduction of electricity.
Teacher's Note: Graphite has one free electron per carbon in its layers, which moves and conducts electricity.
Exam Note: Free electrons let graphite conduct.
Question 12. If water contains dissolved calcium hydrogen carbonate then out of soaps and synthetic detergents, which one will you use for cleaning the dirt of clothes?
Solution.
The given sample of water contains calcium ions and hence is hard water. Soaps are not effective in hard water as they produce scum (insoluble precipitate) with calcium ions. Therefore, synthetic detergents must be used to clean the dirt of clothes in hard water.
Teacher's Note: Soaps form scum with calcium ions in hard water, while synthetic detergents stay effective and lather.
Exam Note: Hard water: use detergents, not soap.
Question 13. Write the names of the next homologues of CH3CH2OH and HCOOH.
Solution.
Homologues of CH3CH2OH: CH3CH2CH2OH (propanol), CH3CH2CH2CH2OH (butanol),...
Homologues of HCOOH: CH3COOH (ethanoic acid), CH3CH2COOH (propanoic acid),...
Teacher's Note: Homologues differ by CH2: the next alcohols are propanol and butanol, and the next acids ethanoic and propanoic acid.
Exam Note: Add CH2 to get next homologue.
Question 14. Write the names of the following compounds.
(i) CH₃–C(=O)–CH₃
(ii) HC≡CH
Solution.
(i) Propanone (ii) ethyne
Teacher's Note: Naming follows the functional group: CH3COCH3 is a ketone, propanone, and HC≡CH is ethyne.
Exam Note: Ketone: -one. Alkyne: -yne.
Question 15. Identify the functional groups in the following compounds and name them.
(i) C₂H₅COO⁻Na⁺
(ii) C₂H₅–C(=O)–OC₂H₅
(iii) CH₃CH₂CH₂OH
(iv) HCHO
Solution.
(i) –COO⁻ group (carboxylate; the compound is the sodium salt of a carboxylic acid)
(ii) –COO– group (ester group): R–C(=O)–O–R′
(iii) –OH group – alcohol
(iv) –CHO group – aldehyde
Teacher's Note: A functional group decides the properties of a compound: carboxylate, ester, alcohol and aldehyde groups are identified here.
Exam Note: Know –COOH, –COO–, –OH and –CHO groups.
Question 16. Mention the number of double bonds between carbon and oxygen in methanoic acid. Write its general formula.
Solution.
Methanoic acid contains 1 C=O bond and 1 C-O bond.
H–C(=O)–O–H
The general molecular formula of a carboxylic acid is CₙH₂ₙO₂.
Teacher's Note: Methanoic acid has one C=O bond and one C–O bond; carboxylic acids have the general formula CnH2nO2.
Exam Note: Carboxylic acid: CnH2nO2.
Question 17. Why vegetable oils are considered healthy as compared to vegetable ghee? How are they converted into ghee? What name is given to the reaction?
Solution.
Vegetable oils contain unsaturated fatty acids which are good for the health, whereas vegetable ghee contains saturated fatty acids which are harmful to our health. Vegetable oils are converted into ghee by the process of hydrogenation. Hydrogen is added to unsaturated compounds in the presence of a catalyst (such as nickel) to produce saturated compounds. The reaction is illustrated as:
R₂C=CR₂ + H₂ → R₂CH–CHR₂ (hydrogenation, Ni catalyst; alkene → alkane)
Teacher's Note: Hydrogenation adds hydrogen to unsaturated vegetable oils using a nickel catalyst, giving saturated fats.
Exam Note: Hydrogenation: oil to ghee with nickel.
Question 18. How is glacial acetic acid different from acetic acid provided to you in laboratory? Write its one characteristic which resembles its name.
Solution.
The water content present in acetic acid provided in the laboratory is higher than that of glacial acetic acid.
Pure ethanoic acid is often called glacial acetic acid because it freezes to form ice-like crystals when kept in cold surroundings (the melting point is 290K).
Teacher's Note: Pure ethanoic acid freezes into ice-like crystals at about 290 K, hence the name glacial acetic acid.
Exam Note: Glacial acetic acid: pure; freezes at 290 K.
Question 19. The gas/kerosene stoves used at home have inlets for air. What is the purpose of these inlets? What will happen, if these inlets are not provided?
Solution.
Inlets are provided to supply air to ensure that the fuel burns completely and give a clean flame. If the inlets are absent, then the fuel may not burn completely and produce sooty flame. This will also result in wastage of fuel.
Teacher's Note: Air inlets give enough oxygen for complete combustion, producing a clean blue flame and saving fuel.
Exam Note: Sufficient air gives complete combustion.
Question 20. How would you predict whether a given water sample is of hard water or soft water? Give chemical equation.
Solution.
To determine whether a given water sample is of hard water or soft water, one can use soap.
Soap produces lather in soft water whereas soap does not produce lather in hard water due to the formation of scum (insoluble precipitate). Scum is a result of reaction of soap with calcium and magnesium ions present in the hard water.
2RCOONa + Ca²⁺ → (RCOO)₂Ca↓ + 2Na⁺ (scum)
Teacher's Note: Soap lathers readily in soft water but forms insoluble scum with calcium and magnesium ions in hard water.
Exam Note: Test hardness with soap: scum means hard.
Question 21. Soaps are prepared by treating the esters of fatty acid with alkali.
Sometimes common salt is also added to it. Why is common salt added during this process?
Solution.
In the reaction of esters with alkali to prepare soap (saponification reaction), the product (soap) is obtained in a suspension form. To precipitate the soap out of the suspension form, common salt (NaCl) is added to it. This process is often referred to as “salting out” of soap.
Teacher's Note: Adding common salt makes soap less soluble in water so it separates out, a process called salting out.
Exam Note: Salt precipitates soap: salting out.
Question 22. Scientists detect the presence of sodium bicarbonate in a water sample. Can this water be used for washing clothes with soap? Justify your answer.
Solution.
Yes, soap can be used for washing clothes in water containing sodium bicarbonate, as sodium ion will not contribute to the hardness of water.
Teacher's Note: Sodium ions do not form scum with soap, so water containing sodium bicarbonate is not hard.
Exam Note: Sodium salts do not cause hardness.
Question 23. Compound A has three carbon atoms, which burns with non-sooty flame. Predict what is A? Write its electron dot structure.
Solution.
Non-sooty flame can be interpreted as clean flame. Clean flame is given out by burning of saturated compounds. Hence, A is propane (C3H8).
Teacher's Note: A three-carbon compound burning with a clean flame must be saturated, so it is propane, C3H8.
Exam Note: Saturated compounds burn with clean flame.
Question 24. Two non-metals A and B combine with each other by sharing of electron to form compound C.
(i) What is the nature of compound C?
(ii) Will it dissolve in water or organic solvents? Give reason for your answer.
Solution.
(i) C is a covalent compound, as the combining atoms form a bond by sharing of electrons.
(ii) Using “like dissolves like” rule, polar molecules dissolve in polar solvents, whereas non-polar molecules dissolve in non-polar solvents. C and organic solvents are both covalent (non-polar) in nature, but water is a polar solvent. Hence C will dissolve in organic solvents.
Teacher's Note: Two non-metals sharing electrons form a covalent compound, which dissolves in organic solvents but not in water.
Exam Note: Like dissolves like: covalent in organic solvents.
Question 25. Account for the following.
(i) Sunlight is necessary for the substitution reactions of saturated hydrocarbons.
(ii) Ethyne burns with a yellow flame and lots of black smoke.
Solution.
(i) Saturated hydrocarbons undergo substitution reaction through a mechanism called “free radical mechanism”, where the initial step of reaction is the formation of free radicals. Generation of free radicals requires sunlight, without which the reaction does not get initiated. So, sunlight is necessary for the substitution reactions of saturated hydrocarbons.
(ii) Ethyne (HC≡CH) is an unsaturated compound, and unsaturated compounds produce yellow sooty flame with lots of black smokes. This is due to incomplete combustion of ethyne in air.
Teacher's Note: Sunlight starts the free-radical substitution of alkanes; ethyne burns incompletely, giving soot.
Exam Note: Light initiates substitution; ethyne is sooty.
Question 26. Give reasons for the following.
(i) Ethanoic acid is used in the preservation of pickles.
(ii) CO2 is released on burning diamond as well as graphite.
Solution.
(i) Ethanoic acid provides an acidic environment where bacteria cannot survive, preserving the pickles for a longer time.
(ii) Both diamond and graphite are allotropes of the same element carbon. The only difference is in their physical properties due to the difference in their structure. The chemical properties remain the same. Carbon when burnt in the presence of oxygen gives carbon dioxide (CO2). Since, diamond and graphite are chemically carbon, both release CO2 upon burning.
Teacher's Note: Acidic ethanoic acid prevents bacterial growth in pickles; diamond and graphite are both carbon and give CO2.
Exam Note: Allotropes have the same chemical properties.
Question 27. An organic compound X of molecular formula C2H4O2 turns blue litmus to red and gives brisk effervescence with Na2CO3 and NaHCO3. Identify X and name of the gas responsible for effervescence.
Solution.
X is ethanoic acid (CH3COOH). It is acidic and hence turns blue litmus red. It releases carbon dioxide (CO2) when treated with Na2CO3 and NaHCO3 which is responsible for effervescence.
2CH3COOH + Na2CO3→ 2CH3COONa + CO2↑ + H2O
CH3COOH + NaHCO3→ CH3COONa + CO2↑ + H2O
Teacher's Note: A compound C2H4O2 that turns blue litmus red and releases CO2 with carbonates is ethanoic acid.
Exam Note: Acid plus carbonate gives CO2.
Question 28. (i) Why does carbon form largest number of compounds? Give two reasons.
(ii) Why are some of these called saturated and the other unsaturated compounds?
(iii) Which one of these two is more reactive and why?
Solution.
(i) Carbon has the ability to form long, branched chains or ring structures with other carbon atoms. This self-linking capacity is referred to as catenation.
Also carbon has a valency of 4 and combines with 4 other monovalent atoms or shares its outermost electrons with different elements through single, double or triple bonds. The bonds formed are highly strong and stable. Hence carbon forms a large variety of compounds.
(ii) Compounds of carbon which are linked by only single bonds between the carbon atoms are called saturated compounds.
Compounds of carbon having double or triple bonds between the carbon atoms are called unsaturated compounds.
(iii) Unsaturated compounds are more reactive than saturated compounds because of the presence of double or triple bonds present in them. These bonds tend to break in the presence of some reacting species to become saturated compounds which are highly stable. The relative stability of hydrocarbons in the decreasing order is given by: alkanes > alkenes > alkynes
Teacher's Note: Carbon forms many compounds by catenation and tetravalency; unsaturated compounds are more reactive than saturated ones.
Exam Note: Catenation, tetravalency; unsaturated more reactive.
Question 29. Write the molecular formula of ethene and also give three succeeding members with their names.
Solution.
The molecular formula of ethene is C2H4. The three succeeding members in this homologous series are:
Propene (C3H6), Butene (C4H8), Pentene (C5H10)
Teacher's Note: Alkenes follow CnH2n: after ethene come propene, butene and pentene.
Exam Note: Alkene series: C2H4, C3H6, C4H8, C5H10.
Question 30. Give reasons for the following.
(i) Unsaturated hydrocarbons show addition reaction.
(ii) Alcohol supplied for industrial purpose is mixed with copper sulphate.
Solution.
(i) A + B → C
The above reaction occurs because the stability of C is higher than the stability of A and
B. Molecules always tend to attain the most stable configuration in a reaction.
Here saturated compounds are more stable than unsaturated compounds. The double/triple bonds present in the unsaturated compound break to form single bonds by combining with the reactant to attain a highly stable product. Therefore, unsaturated hydrocarbons show addition reaction.
(ii) Alcohol supplied for industrial purpose is mixed with chemicals like methanol to prevent the misuse of it. It is a common practice to overuse this alcohol for recreational purposes, and addition of these chemicals would help prevent the misuse to an extent. To identify such mixtures of alcohols, dyes or coloured substances are added to colour the alcohol blue. In this case, the coloured substance added is copper sulphate.
Teacher's Note: Unsaturated compounds add reagents to form more stable saturated ones; copper sulphate and methanol denature alcohol.
Exam Note: Unsaturated compounds undergo addition.
Question 31. Name the following compounds.
(i) CH₃–CH₂–CH(CH₃)–CH₂–CH₃
(ii) CH₃–CH₂–CH₂–CH₂–COOH
Solution.
(i) 3-methylpentane
(ii) Pentanoic acid
Teacher's Note: Names come from chain length, branches and functional group: 3-methylpentane is a branched alkane; pentanoic acid has five carbons.
Exam Note: Name by longest chain and functional group.
Question 32. (i) What is black gold and how is it formed? (ii) Why coal and petroleum are considered as air pollutants?
Solution.
(i) Petroleum or crude oil is called black gold and it is formed from the remains of plants and animals that lived in the sea millions of years ago. The dead remains along with the silt which settled in the sea bed are attacked by bacteria and got converted to crude oil and gas under high pressure conditions. Slowly the silt compressed into rocks and the oil seeped into the porous parts of the rocks.
(ii) Fossil fuels such as coal and petroleum contain some amount of nitrogen and sulphur in them. The combustion of these fuels in air results in the formation of oxides of nitrogen and sulphur which are major pollutants of the environment. Therefore, coal and petroleum are considered to be pollutants of air.
Teacher's Note: Petroleum is called black gold; burning coal and petroleum releases oxides of sulphur and nitrogen that pollute air.
Exam Note: Petroleum: black gold; fuels give polluting oxides.
Question 33. A substance (X) be oxidised to acetic acid (CH3COOH)? Name substance
(X) and write two tests to demonstrate acidic nature of acetic acid.
Solution.
The substance X is ethanol (C2H5OH).
The acidic nature of acetic acid can be shown using:
(a) Litmus test – Chemicals which are acidic in nature turn blue litmus red
(b) Sodium carbonate test – Acids when treated with sodium carbonate gives effervescence due to the liberation of carbon dioxide. Acetic acid also produces CO2 in this reaction.
2CH3COOH + Na2CO3→ 2CH3COONa + CO2↑ + H2O
Teacher's Note: Ethanol is oxidised to ethanoic acid, which turns blue litmus red and reacts with sodium carbonate giving CO2.
Exam Note: Acidic nature: litmus and carbonate tests.
Question 34. Explain giving chemical equation, how are esters prepared? Specify any one property and one use of esters.
Solution.
Esters are prepared by the reaction of an acid and an alcohol in the presence of an acid catalyst. The reaction is called esterification reaction.
R–OH + R′–COOH → R′COO–R + H₂O (alcohol + carboxylic acid → ester, acid catalyst)
Esters are sweet smelling substances and hence are used in making perfumes and as flavouring agents.
Teacher's Note: Esterification: an acid reacts with an alcohol, with acid catalyst, forming a sweet-smelling ester.
Exam Note: Acid + alcohol gives ester + water.
Question 35. An organic compound X which is sometimes used as an antifreeze has the molecular formula C2H6O. X on oxidation gives a compound Y which gives effervescence with a baking soda solution. Identify X and Y. Write the chemical equation of reaction.
Solution.
X is ethanol (C2H5OH) and Y is ethanoic acid (C2H4O2)
C₂H₅OH (X) → CH₃COOH (Y) (oxidation)
CH₃COOH + NaHCO₃ → CH₃COONa + CO₂↑ + H₂O (baking soda)
Teacher's Note: Oxidation of ethanol gives ethanoic acid, which reacts with baking soda to release carbon dioxide.
Exam Note: Ethanol to ethanoic acid; effervescence with NaHCO3.
Question 36. A. Give a detailed explanation on the following.
Properties of acetic acid
Solution.
Acetic acid (CH3COOH) is a weak acid and belongs to the family of carboxylic acids.
Physical Properties:
Acetic acid exists in liquid state at room temperature. Pure acetic acid has a melting point of 290K and often freezes when kept in cold climates.
Chemical Properties:
(a) Reaction with alcohol:
Acetic acids react with alcohols in the presence of an acidic medium to form esters. Esters are sweet smelling substances and are often used in perfumes and as flavouring agents.
CH₃COOH + R–OH → CH₃COOR + H₂O (acid catalyst)
(b) Reaction with base:
Like other acids, acetic acid reacts with base to form salt and water. The reaction is called neutralization reaction.
CH₃COOH + NaOH → CH₃COONa + H₂O (base → salt)
(c) Reaction with carbonates and bicarbonates:
Acetic acid reacts with carbonates and bicarbonates to form salt, carbon dioxide and water.
2CH3COOH + Na2CO3→ 2CH3COONa + CO2↑ + H2O
CH3COOH + NaHCO3→ CH3COONa + CO2↑ + H2O
Teacher's Note: Ethanoic acid reacts with alcohols, bases and carbonates; it is a weak acid.
Exam Note: Ethanoic acid: esters, salts, CO2.
Question 36. B. Give a detailed explanation on the following.
Versatile nature of carbon
Solution.
The versatility of carbon can be explained in the following ways:
(a) Catenation:
The self-linking capacity of an element is referred to as catenation. Carbon can form long straight chains, branched chains, or ring structures by bonding with other carbon atoms. No other element exhibits catenation up to this extent. Carbon can link with other carbon atoms using single, double or triple bonds.
(b) Tetravalency:
Carbon has a valency of 4. It is satisfied by forming bonds with 4 other monovalent atoms. Carbon can also form multiple bonds (double or triple bonds) with atoms like oxygen and nitrogen. The bonds formed are highly stable and thus forms stable compounds.
Teacher's Note: Carbon is versatile because of catenation and tetravalency, forming stable compounds with many elements.
Exam Note: Catenation and tetravalency: versatility of carbon.
Question 37. How are the following pairs related?
(i) 2, 2-dimethylpropane and 2-methylbutane
(ii) Ethane and propane
(iii) C2H5Cl and C3H7Cl
(iv) C3H4 and C2H4
Solution.
(i) The structural formula of the two compounds are shown below.
CH₃–C(CH₃)₂–CH₃
2,2-dimethylpropane
CH₃–CH(CH₃)–CH₂–CH₃
2-methylbutane
Note that both compounds have the same molecular formula C5H12. Since they have same molecular formula but different structural formula, they are isomers.
(ii) Ethane (C2H6) and propane (C3H8) can be represented by the general formula CnH2n+2 where ‘n’ is the number of carbon atoms. Also they differ by a –CH2 unit. Hence they are homologues.
(iii) C2H5Cl and C3H7Cl differ by a –CH2 unit. Also these 2 can be represented by the formula CnH2n+1Cl. Therefore they are homologues.
(iv) C3H4 is an alkyne and C2H4 is an alkene. Both the compounds contain double or triple bonds. Therefore, they belong to the family of unsaturated compounds.
Teacher's Note: Isomers share a molecular formula but differ in structure; homologues differ by CH2; unsaturated compounds contain multiple bonds.
Exam Note: Isomers: same formula. Homologues: differ by CH2.
Question 38. Draw the structures of
(i) chlorohexane (ii) butanol
(iii) propanone (iv) sodium ethanoate
(v) butanoic acid (vi) butyraldehyde
(vii) sodium ethoxide (viii) sodium stearate
(ix) glycerol (x) sodium acetate
Solution.
(i) Chlorohexane: CH₃–CH₂–CH₂–CH₂–CH₂–CH₂–Cl
(ii) Butanol: CH₃–CH₂–CH₂–CH₂–OH
(iii) Propanone: CH₃–C(=O)–CH₃
(iv) Sodium ethanoate: CH₃–C(=O)–O⁻Na⁺
(v) Butanoic acid: CH₃–CH₂–CH₂–C(=O)–OH
(vi) Butyraldehyde: CH₃–CH₂–CH₂–CHO
(vii) Sodium ethoxide: CH₃–CH₂–O⁻Na⁺
(viii) Sodium stearate: CH₃–(CH₂)₁₆–C(=O)–O⁻Na⁺
(ix) Glycerol (propane-1,2,3-triol): CH₂(OH)–CH(OH)–CH₂(OH)
(x) Sodium acetate: CH₃–C(=O)–O⁻Na⁺
Teacher's Note: Structures show how atoms are joined; each name tells chain length and functional group.
Exam Note: Learn functional groups and formulae.
Question 39. Give the reaction for the hydrogenation of unsaturated carbon compounds. Define the term catalyst and name the catalyst used in this reaction. Which oil should be chosen for cooking and why?
Solution.
Hydrogenation is the process of addition of hydrogen to compounds containing double/triple bonds to form saturated compounds.
The hydrogenation of unsaturated carbon compounds is given by the reaction:
R₂C=CR₂ + H₂ → R₂CH–CHR₂ (hydrogenation, Ni catalyst; alkene → alkane)
Catalyst is a substance which alters the rate of a chemical reaction, without undergoing any change to itself. Nickel, palladium can be used as the catalyst for hydrogenation. Vegetable oil must be chosen for cooking as it contains unsaturated fatty acids which are good for health.
Teacher's Note: Hydrogenation adds hydrogen across double or triple bonds using a nickel or palladium catalyst; unsaturated oils are healthier.
Exam Note: Hydrogenation: Ni catalyst; use vegetable oil.
Question 40. Give account of chemical properties?
(i) combustion of ethanol
(ii) oxidation of ethanol
(iii) reaction of C2H5OH with sodium metal
(iv) dehydration of C2H5OH
(v) reaction of C2H5OH with ethanoic acid
Solution.
(i) Ethanol upon combustion gives carbon dioxide and water.
C2H5OH + 3O2→ 2CO2 + 3H2O
(ii) Ethanol is oxidized to ethanoic acid when treated with oxidizing agents like acidified potassium dichromate
CH₃CH₂OH → CH₃COOH (alkaline KMnO₄ + heat, or acidified K₂Cr₂O₇ + heat)
(iii) Ethanol reacts with sodium metal to liberate hydrogen gas.
2C2H5OH + 2Na → 2C2H5O-Na+ + H2
(iv) Ethanol when dehydrated using conc. H2SO4 forms ethene.
CH₃CH₂OH → CH₂=CH₂ + H₂O (443 K, conc. H₂SO₄)
(v) Ethanol (C2H5OH) reacts with ethanoic acid (CH3COOH) in the presence of acidic medium to produce ethyl ethanoate which is an ester.
CH₃COOH + CH₃CH₂OH → CH₃COOCH₂CH₃ + H₂O (acid catalyst)
Teacher's Note: Ethanol burns, oxidises to ethanoic acid, reacts with sodium, dehydrates to ethene and forms esters with acids.
Exam Note: Ethanol: five reactions with balanced equations.
Question 41. An organic compound A with molecular form C4H8O2 on alkaline hydrolysis gives two compound B and C. C on acidification with dil. HCl gives D. Oxidation of B with K2Cr2O7/H2SO4 also gives D. Identify A, B, C and D and explain all the reactions involved.
Solution.
A – ethyl ethanoate
B – ethanol
C – sodium ethanoate
D – ethanoic acid
Esters upon alkaline hydrolysis gives back the carboxylic acid and the alcohol. The acid is initially obtained in its salt form. The reaction is called saponification.
CH₃COOCH₂CH₃ (A) + NaOH → CH₃COONa (C) + CH₃CH₂OH (B)
The salt (sodium ethanoate) is treated with dil HCl to obtain the carboxylic acid.
CH₃COONa (C) + HCl → CH₃COOH (D) + NaCl
Ethanol is oxidized to ethanoic acid in the presence of acidified potassium dichromate. Here, the acid used for acidification is H2SO4.
CH₃CH₂OH (B) → CH₃COOH (D) (acidified K₂Cr₂O₇ + heat)
Teacher's Note: Alkaline hydrolysis of ethyl ethanoate gives ethanol and sodium ethanoate; oxidising ethanol and acidifying the salt give ethanoic acid.
Exam Note: Ester hydrolysis (saponification) gives alcohol and salt.
Question 42. Have you ever observed while cleaning cloth that foam is formed with difficulty and an insoluble substance (scum) remains after washing with water? This is caused by the reaction of soap with the calcium and magnesium salts, which cause the hardness of water. Hence, you need to use a larger amount of soap. This problem is overcome by using another class of compounds called detergents as cleansing agents. Detergents are generally ammonium or sulphonate salts of long chain carboxylic acids. The charged ends of these compounds do not form insoluble precipitates with the calcium and magnesium ions in hard water. Thus, they remain effective in hard water. Detergents are usually used to make shampoos and products for cleaning clothes.
(i) How will you test the hardness of water?
(ii) Why soap forms scum (insoluble substance) with hard water?
(iii) How one can overcome the problem of scum formation? What values do you identify in this context?
Solution.
(i) The hardness of water can be determined using soap.
If the given amount of soap has difficulty in producing foam (lather) and produces an insoluble precipitate (scum) instead, in the water then the water is hard.
If the soap produces foam easily in the water, then the water is soft.
(ii) Hard water contains calcium and magnesium ions. Scum is formed as a result of reaction between calcium or magnesium ions with soap.
2RCOONa + Mg²⁺ → (RCOO)₂Mg↓ + 2Na⁺ (scum)
(iii) The problem of scum formation can be avoided by using detergents. The charged ends of these compounds do not form insoluble precipitates with calcium or magnesium ions in hard water which makes detergents effective in hard water.
From this, one can learn that soaps are ineffective in hard water (water containing calcium and magnesium ions) as they do not produce foam in hard water. This is rectified by the usage of another class of compounds called detergents. Thus one must not use soaps in hard water, as it will be a waste of time and money. At the same time one must also realize that detergents are non-biodegradable. These compounds cannot be degraded by bacteria and therefore can potentially harm the environment.
Teacher's Note: Scum forms when soap meets calcium or magnesium ions in hard water; detergents avoid this problem.
Exam Note: Detergents work in hard water.
Challengers
Question 1. Consider the following statements related to diamond and graphite.
I. Both diamond and graphite are used as abrasives.
II. Diamond and graphite have different arrangements of carbon atoms.
III. The carbon atoms in graphite have a different number of neutrons from those in diamond.
IV. The carbon atoms in both graphite and diamond have four single covalent bonds. The incorrect statement(s) is/are
A. I and III
B. II and IV
C. I, III and IV
D. All of these
Solution.
Statement I is incorrect: graphite is soft and is used as a lubricant, while diamond (being very hard) is the one used as an abrasive; both are not abrasives.
Statement II is correct: diamond and graphite have different arrangements of carbon atoms.
Statement III is incorrect: the number of neutrons in the carbon atoms of graphite and diamond is the same, since both are allotropes of the same element carbon.
Statement IV is incorrect: in diamond, each carbon is covalently bonded to 4 other carbon atoms by single bonds, whereas in graphite each carbon is covalently bonded to 3 other carbon atoms.
Hence the incorrect statements are I, III and IV (option C).
Teacher's Note: Diamond and graphite are allotropes with identical atoms but different structures and properties.
Exam Note: Allotropes differ in structure, not atoms.
Question 2. What would happen if graphene is heated in sufficient supply of air?
A. It aggregates to form graphite
B. It gets converted into diamond
C. Carbon dioxide gas is released
D. It becomes a non-conductor
Solution.
Graphene is an allotrope of carbon. Like diamond, and graphite, when subjected to sufficient supply of air, it burns to release carbon dioxide.
Hence option C is correct.
Teacher's Note: All carbon allotropes, including graphene, burn in sufficient air to give carbon dioxide.
Exam Note: Burning carbon in air gives CO2.
Question 3. C4+ does not exist but Pb4+ exists although both belong to the same group. This is because
I. size of carbon is much smaller than Pb.
II. large amount of energy is needed in case of carbon.
III. of inert pair effect.
IV. nucleus cannot hold such a large number of electrons.
The correct statement(s) is/are
A. Only I
B. I and II
C. Only III
D. II, III and IV
Solution.
As you go down a group, the size of the atom increases and the ionization enthalpy decreases due to the shielding of outermost electrons by the inner electrons.
Carbon is very small and 4 electrons would have to be removed against a very large energy, so C⁴⁺ does not exist (statements I and II). Hence option B.
Teacher's Note: Carbon is small and removing four electrons needs huge energy, so C4+ does not form unlike Pb4+.
Exam Note: Small size and high ionisation energy of carbon.
Question 4. The structures of three hydrocarbons are given below
(1) CH₃–CH₂–CH₃
(2) CH₃–CH(CH₃)–CH₃
(3) CH₃–CH₂–CH₂–CH₃
Which statement is correct for all the above three compounds?
A. They are isomers of each other
B. They have the same general formula
C. They have the same physical properties
D. They react with aqueous bromine
Solution.
All the three compounds are alkanes and can be generally represented by CnH2n+2, where ‘n’ is the number of carbon atoms.
Hence option B is correct.
Teacher's Note: Alkanes follow the general formula CnH2n+2; propane, isobutane and butane are all alkanes.
Exam Note: Alkane formula: CnH2n+2.
Question 5. The diagram shows the molecule, ethyl propanoate.
CH₃–CH₂–C(=O)–O–CH₂–CH₃
How many bonding pairs of electrons are there in the molecule?
A. 13
B. 16
C. 17
D. 20
Solution.
Number of C-H bonds = 10 = 10 bond pairs (bp) of electrons
Number of C-C bonds = 3 = 3 bp of electrons
Number of C-O bonds = 2 = 2 bp of electrons
Number of C=O bonds = 1 = 2 bp of electrons
Total number of bp = 10+3+2+2 = 17
Hence option C is correct.
Teacher's Note: Count bonding pairs: a single bond has one pair, a double bond two pairs; ethyl propanoate has 17.
Exam Note: Single bond 1 pair; double bond 2 pairs.
Question 6. Which compound has an addition reaction with - chlorine?
A. C2H4
B. C2H5OH
C. C2H6
D. CH3CO2H
Solution.
C2H4 is an alkene which is an unsaturated compound. It gives addition reaction.
Hence option A is correct.
Teacher's Note: Alkenes like ethene undergo addition reaction with chlorine; saturated compounds undergo substitution.
Exam Note: Addition: unsaturated compounds.
Question 7. One mole of a hydrocarbon X reacted completely with one mole of hydrogen gas in the presence of a heated catalyst. What could be the formula of X?
A. C2H6
B. C5H10
C. C3H8
D. C7H16
Solution.
C5H10 is an alkene which is an unsaturated hydrocarbon. Only unsaturated hydrocarbons react with hydrogen to form saturated hydrocarbons.
Hence option B is correct.
Teacher's Note: A hydrocarbon adding exactly one mole of hydrogen has one double bond, so it is an alkene.
Exam Note: One mole H2 added: one double bond.
Question 8. Compound X is a six carbon compound. When it is burnt, light is generated. Here, the colour of the flame is yellow because of the presence of carbon particles. Compound X cannot be
A. C6H12
B. C6H14
C. C6H6
D. C6H10
Solution.
Only unsaturated carbon compounds produce yellow (and sooty) flame. C6H14 is a saturated compound (hexane) and it will always produce clean blue flame (not yellow) when burnt in sufficient amount of oxygen.
Hence compound X cannot be C6H14 (option B).
Teacher's Note: Saturated hydrocarbons burn with a clean flame, so hexane cannot give a yellow sooty flame.
Exam Note: Saturated: clean flame.
Question 9. A reaction scheme is shown below:
Ethene + Steam → (catalyst) X → (acidified potassium dichromate(VI)) Y → (x) Z
What is the final product Z?
A. A carboxylic acid
B. An alcohol
C. An alkene
D. An ester
Solution.
Ethene + Steam → (catalyst) Ethanol (X) → (acidified K₂Cr₂O₇) Ethanoic acid (Y) → (ethanol, x) Ethyl ethanoate, an ester (Z)
Hence option D is correct.
Teacher's Note: Ethene with steam gives ethanol, oxidised to ethanoic acid, which with ethanol gives the ester ethyl ethanoate.
Exam Note: Ethene to ethanol to ethanoic acid to ester.
Free study material for Science
Class 10 Mathematics: All In One Solutions for All In One Solutions Class 10 Science Chapter 4 Carbon And Its Compounds
Complete Math Solutions for All In One Solutions Class 10 Science Chapter 4 Carbon And Its Compounds
Explore reliable mathematical solutions for All In One Solutions Class 10 Science Chapter 4 Carbon And Its Compounds tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
In addition to these All In One Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.