Xam Idea Solutions Class 10 Geography Chapter 4 Minerals And Energy Resources Long Answer Questions

Solutions for Class 10 Social Science: Chapter 04 Minerals And Energy Resources

Review structured textbook solutions for Class 10 Social Science Chapter 04 Minerals And Energy Resources prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 10 Social Science Solutions: Chapter 04 Minerals And Energy Resources

Navigate directly to the solved Social Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Long Answer Questions

Question 1. How are bauxite deposits formed? In which regions is bauxite found?

Solution.

Bauxite deposits are formed by the decomposition of a wide variety of rocks, rich in aluminium silicates.

It is an important metal because it combines the strength of metals such as iron with extreme lightness, with good conductivity.

They are mainly found in Amarkantak plateau, Maikal hills and the plateau region of Bilaspur.

Odisha is the largest bauxite producing state. Panchpatmali deposits in Koraput district (Odisha) are the most important bauxite deposits in the state.

Teacher's Note: Bauxite forms from decomposition of aluminium-rich rocks and is found in several Indian regions.

Exam Note: Include the formation process and regions like Amarkantak and Odisha.

Question 2. How is tidal energy produced?

Solution.

Oceanic tides can be used to generate electricity.

Floodgate dams are built across inlets.

During high tide, water flows into the inlet and gets trapped when the gate is closed.

After the tide falls outside the floodgate, the water retained by the floodgate flows back to sea via a pipe that carries it through a power-generating turbine.

Teacher's Note: Tidal energy uses floodgate dams across inlets to trap water at high tide and drive turbines as it flows out.

Exam Note: Mention tides, floodgate dams and turbine generation of electricity.

Question 3. Why should we use renewable energy resources? Explain with arguments. [CBSE (F) 2017]

Solution.

We should use renewable energy resources because of the:

(i) Exhaustibility of nonrenewable resources.

(ii) Long years of geological formation of nonrenewable resources.

(iii) Causes less pollution.

(iv) Available in abundance.

(v) Environmental friendly.

(vi) Strong dependence on fossil fuels such as coal, oil and gas is a threat to our environment.

(vii) Rising prices of oil and gas and their potential shortages.

(viii) Uncertainties about the security of energy supply in future.

(ix) There is a pressing need to use renewable energy sources like solar energy, wind, tide, biomass and energy from waste material.

Teacher's Note: Renewable resources are better because fossil fuels run out and cause pollution.

Exam Note: Give arguments like exhaustibility, pollution, import dependence and being freely available.

Question 4. In what forms do minerals occur?

Solution.

Minerals generally occur in these forms:

(i) Igneous and metamorphic rocks: Minerals may occur in the cracks, crevices, faults or joints. The smaller occurrences are called veins or lodes. In most cases, they are formed when minerals in liquid, molten and gaseous forms are forced upward through cavities towards the earth’s surface. They cool and solidify as they rise.

Example: Metallic minerals like tin, copper, zinc and lead, etc., are obtained from the veins and lodes.

(ii) In sedimentary rocks: A number of minerals occur in beds or layers. They have been formed as a result of deposition, accumulation and concentration in horizontal strata. Coal and some forms of iron ore and sedimentary minerals include gypsum, potash salt and sodium salt.

(iii) Another mode of formation involves the decomposition of surface rocks, and the removal of soluble constituents, leaving a residual mass of weathered material containing ores. Bauxite is formed in this way.

(iv) Certain minerals may occur as alluvial deposits in the sands of valley floors and the base of hills. These deposits are called ‘placer deposits’ and generally contain minerals which are not corroded by water.

Example: Gold, silver, tin and platinum are most important among such minerals.

(v) The ocean waters contain vast quantities of minerals, but most of these are too widely diffused to be of economic significance.

Example: Common salt, magnesium and bromine are largely derived from the ocean waters. The ocean beds, too, are rich in manganese nodules.

Teacher's Note: Minerals are found in rocks, as layers, and in other forms of deposit.

Exam Note: List each form of occurrence with an example, starting with igneous rocks.

Question 5. What are the major iron ore belts in India?

Solution.

(i) Odisha–Jharkhand Belt: In Odisha, high grade haematite ore is found in Badampahar mines in the Mayurbhanj and Kendujhar districts. In the adjoining Singhbhum district of Jharkhand, haematite iron ore is mined in Gua and Noamundi.

(ii) Durg–Bastar–Chandrapur Belt: It lies in Chhattisgarh and Maharashtra. Very high grade haematite are found in the famous Bailadila range of hills in the Bastar district of Chhattisgarh. It has the best physical properties needed for steel making; iron ore from these mines is exported to Japan, South Korea via the Vishakhapatnam port.

(iii) Bellary–Chitradurga-Belt Chikkamagaluru: Tumakuru belt in Karnataka has large reserves of iron ore. The Kudermukh mines located in the western ghats of Karnataka are a 100 per cent export unit. Kudermukh deposits are known to be one of the largest in the world.

(iv) Maharashtra–Goa belt: It includes the state of Goa and Ratnagiri district of Maharashtra. Though the ores are not of very high quality, yet they are efficiently exploited. Iron ore is exported through the Marmagao port.

Teacher's Note: India's iron ore is found in belts in the eastern and central states.

Exam Note: Name the belts with their states and mines, starting with Odisha-Jharkhand.

Question 6. What are the four main types of coal found in India?

Solution.

(i) Anthracite: It is the highest quality hard coal. It is found in parts of Jammu and Kashmir.

(ii) Bituminous: This coal has been buried deep and subjected to increased temperatures. It is the most popular coal in commercial use. Metallurgical coal is high grade bituminous coal which has a special value for smelting iron in blast furnaces.

(iii) Lignite: It is a low grade brown coal, which is soft with high moisture content. The lignite reserves are in Neyveli in Tamil Nadu. It is used for the generation of electricity.

(iv) Peat: Decaying plants in swamps produce peat, which has low carbon content and high moisture content resulting in low heating capacity.

Teacher's Note: Coal in India is classed by carbon content into anthracite, bituminous, lignite and peat, with anthracite the best.

Exam Note: Remember four coal types, ranked by carbon content.

Question 7. Differentiate between hydel power and thermal power.

Solution.

Hydel power:

(i) It is generated by fast flowing water.

(ii) It uses renewable resources.

(iii) Initially, its cost was high but later it became cheaper.

(iv) It does not cause any pollution.

Example: Bhakra Nangal project.

Thermal power:

(i) It is generated by using coal, petroleum and natural gas.

(ii) It uses all non-renewable resources.

(iii) Its cost is very high and its production is expensive.

(iv) It does cause pollution.

Example: Badarpur thermal plant of Delhi.

Teacher's Note: Hydel power uses flowing water and is clean and renewable, while thermal power burns fossil fuels and pollutes.

Exam Note: Compare source, renewability and pollution in two columns.

Question 8. How are minerals formed in sedimentary rocks?

Solution.

In sedimentary rocks, a number of minerals occur in beds or layers.

They have been formed as a result of deposition, accumulation and concentration in horizontal strata. Coal and some forms of iron ore have been concentrated as a result of long periods under great heat and pressure.

Another group of sedimentary minerals includes gypsum, potash salt and sodium salt. These are formed as a result of evaporation especially in arid regions.

Teacher's Note: Sedimentary minerals form when material settles and concentrates in horizontal layers over very long periods.

Exam Note: Mention deposition, accumulation and concentration in strata.

Question 9. “India is fortunate to have fairly rich and varied mineral resources. However, these are unevenly distributed.” Comment. OR ‘‘Minerals are unevenly distributed in India.’’ Support the statement with examples. [CBSE (AI) 2017]

Solution.

Minerals are unevenly distributed in various regions of India.

Peninsular rocks contain most of the reserves of coal, metallic minerals, mica and many other non-metallic minerals.

Sedimentary rocks on the western and eastern flanks of the peninsula, in Gujarat and Assam have most of the petroleum deposits.

Rajasthan with the rock systems of the peninsula, has reserves of many non-ferrous minerals.

The vast alluvial plains of North India are almost devoid of economic minerals.

Teacher's Note: Minerals are unevenly spread because they depend on geology, with peninsular rocks holding most coal and metallic ores.

Exam Note: Give regional examples to support the uneven distribution claim.

Question 10. What are the uses of copper? Give distribution of copper in India.

Solution.

(i) India is critically deficient in the reserve and production of copper.

(ii) Being malleable, ductile and a good conductor, copper is mainly used in electrical cables, electronics and chemical industries.

(iii) The Balaghat mines in Madhya Pradesh produce 52 per cent of India’s copper.

(iv) The Singhbhum district of Jharkhand is also a leading producer of copper.

(v) The Khetri mines in Rajasthan are also famous for copper reserves.

Teacher's Note: Copper is malleable, ductile and conducts electricity well, yet India has a shortage of reserves.

Exam Note: Link copper uses with its deposit locations.

Question 11. In which regions does petroleum occur in India?

Solution.

Most of the petroleum occurrences in India are associated with anticlines and fault traps in the rock formations of the tertiary age.

In regions of folding, anticlines or domes, it occurs where oil is trapped in the crest of the upfold.

The oil bearing layer is porous limestone or sandstone through which oil may flow.

The oil is prevented from rising or sinking by intervening non-porous layers. Petroleum is also found in fault traps between porous and non-porous rocks.

Teacher's Note: Petroleum in India is trapped in anticlines and fault traps of tertiary rocks, beneath impermeable layers.

Exam Note: Mention anticlines, fault traps and tertiary rocks.

Question 12. Which regions are known for petroleum production in India?

Solution.

(i) About 63 per cent of India’s petroleum production is from Mumbai High.

(ii) 18 per cent from Gujarat and 16 per cent from Assam.

(iii) There are three major offshore fields of western India, where oil is produced.

(iv) Ankleshwar is the most important oil field of Gujarat.

(v) Assam is the oldest oil producing state of India. Digboi, Naharkatiya and Moran- Hugrijan are the important oilfields in the state.

Teacher's Note: Petroleum output comes from a few offshore and onshore fields, with Mumbai High supplying most.

Exam Note: List major oil fields with their rough shares.

Question 13. India now ranks as a ‘wind superpower of the world.’ Is it true?

Solution.

India is one of the world’s wind superpowers at present.

The largest wind farm cluster is located in Tamil Nadu from Nagercoil to Madurai.

Apart from these, Andhra Pradesh, Karnataka, Gujarat, Kerala, Maharashtra and Lakshadweep have important wind farms.

Nagercoil and Jaisalmer are well known for effective use of wind energy in the country.

Since India has a long coastline, the coasts can easily be used for setting up effective windmills.

Teacher's Note: India has large wind farm clusters in the south and west, so the claim holds true.

Exam Note: Name Tamil Nadu's Nagercoil-Madurai wind cluster as evidence.

Question 14. What is geothermal energy? In which regions have experimental projects been set up in India?

Solution.

Geothermal energy refers to the heat and electricity produced by using the heat from the interior of the earth.

It exists because the earth grows progressively hotter with increasing depth.

Where the geothermal gradient is high, high temperatures are found at shallow depths.

Groundwater in such areas absorbs heat from the rocks and becomes hot.

It is so hot that when it rises to the earth’s surface, it turns into steam. This steam is used to drive turbines and generate electricity.

Two experimental projects: One is located in the Parvati valley near Manikaran in Himachal Pradesh and the other is located in the puga valley, Ladakh.

Teacher's Note: Geothermal energy comes from the earth's internal heat, and India's only trial projects are in a few places.

Exam Note: Define geothermal energy, then name the trial project sites.

Question 15. Highlight the importance of petroleum. Explain the occurrence of petroleum in India. [CBSE Delhi 2016]

Solution.

Importance of Petroleum:

(i) Petroleum is the major energy source in India.

(ii) Provides fuel for heat and lighting.

(iii) Provides lubricant for machinery.

(iv) Provides raw material for a number of manufacturing industries.

(v) Petroleum refineries act as nodal industry for synthetic, textile, fertilizer and chemical industries.

Its occurrence:

(i) Most of the petroleum occurrences in India are associated with anticlines and fault traps.

(ii) In regions of folding, anticline or domes, it occurs where oil is trapped in the crest of the upfold.

(iii) Petroleum is also found in fault traps between porous and non-porous rocks.

Teacher's Note: Petroleum serves as fuel, lubricant and industrial raw material, and occurs mainly in folded rock structures.

Exam Note: Cover both importance and occurrence, since both parts carry marks.

Question 16. Explain the importance of conservation of minerals. Highlight any three measures to conserve them. [CBSE (AI) 2016]

Solution.

Importance of conservation of Minerals:

(i) Mineral resources are being rapidly consumed which takes millions of years to be created and concentrated.

(ii) Mineral resources are finite and non-renewable

(iii) Continued extraction of ores leads to increasing costs as mineral extraction comes from greater depths along with decreasing quality.

The three measures to conserve minerals are:

(i) It should be used in a planned a sustainable manner.

(ii) Improved technology needs to be constantly evolved to allow use of low grade ores at low costs.

(iii) Some of the metals are recyclables.

(iv) Scrap of metal can be used and some other substitute can be found.

Teacher's Note: Minerals form over millions of years but are consumed fast, which makes their conservation necessary.

Exam Note: Give three measures along with the importance points.

Class 10 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 10 Geography Chapter 4 Minerals And Energy Resources Long Answer Questions

Complete Math Solutions for Xam Idea Solutions Class 10 Geography Chapter 4 Minerals And Energy Resources Long Answer Questions

Review detailed solutions for Class 10 Mathematics. The Xam Idea Solutions Class 10 Geography Chapter 4 Minerals And Energy Resources Long Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 10 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Social Science?

They are chapter-wise solved questions from the book for Class 10 Social Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Social Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Social Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Social Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Social Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.