SB Mathur Solutions for JEE Physics: Chapter 04 Matrix Matching Type Questions
Access comprehensive textbook solutions for Chapter 04 Matrix Matching Type Questions using the SB Mathur reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice JEE Physics Solutions: Chapter 04 Matrix Matching Type Questions
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Matrix-Matching-Type Questions - Questions 4.1.1 to 4.7.4
4.1 General Physics
Question 4.1.1. Some physical quantities are given in Column A and some SI units in which these quantities may be expressed are given in Column B. Match them.
| Column A | Column B |
|---|---|
| (i) GMeMs (G = gravitational constant, Me = mass of earth, Ms = mass of sun) | (a) V C m |
| (ii) 3RT/M (R = gas constant, T = absolute temperature, M = molar mass) | (b) kg m3 s–2 |
| (iii) F2/(q2B2) (F = force, q = charge, B = magnetic flux density) | (c) m2 s–2 |
| (iv) GMe/Re (Re = radius of earth) | (d) F V2 kg–1 |
Solution. (i) → (a), (b): GMeMs = Fr2 = kg m3 s–2; V C m = J m = N m m = kg m3 s–2.
(ii) → (c), (d): 3RT/M = Crms2 → (m s–1)2 = m2 s–2; F V2 kg–1 = C V kg–1 = J kg–1 = kg m2 s–2 kg–1 = m2 s–2.
(iii) → (c), (d): F2/(q2B2) = (IlB)2/(qB)2 = (s–1 m)2 = m2 s–2 = F V2 kg–1.
(iv) → (c), (d): GMe/Re = (force × distance)/mass = N m/kg = kg m s–2 m/kg = m2 s–2.
Teacher's Note: Reduce every quantity to base units; a unit and a quantity match when their dimensions are equal.
Exam Note: Convert to kg, m, s first; compare dimensions.
Question 4.1.2. Column A gives a list of possible set of parameters measured in some experiments. The variations of the parameters in the form of graphs are shown in Column B. (Graphs as drawn: (a) a U-shaped curve with minimum in the middle; (b) a straight line through the origin O; (c) a straight line with positive intercept on the Y-axis; (d) a curve starting at O and rising ever more steeply.)
| Column A | Column B (graph) |
|---|---|
| (i) The potential energy of a simple pendulum (y-axis) as a function of its displacement (x-axis) | (a) |
| (ii) Displacement (y-axis) as a function of time (x-axis) for a one-dimensional motion at zero or constant acceleration when the body is moving along the positive x-direction | (b) |
| (iii) The range of a projectile (y-axis) as a function of its velocity (x-axis) when projected at a fixed angle | (c) |
| (iv) The square of the time period (y-axis) of a simple pendulum as a function of its length (x-axis) | (d) |
Solution. (i) → (a), (d): U = ½kx2 represents a parabola.
(ii) → (b), (d): With zero acceleration, motion is uniform and the slope of the x–t graph is constant, hence (b). With constant acceleration (x = ½at2) the slope increases with time, hence (d).
(iii) → (d): Range R = u2 sin2θ/g, so R ∝ u2, a parabola passing through the origin.
(iv) → (b): T2 = (4π2/g) l = kl, a straight line through the origin.
Teacher's Note: Write each relation (U ∝ x², R ∝ u², T² ∝ l), then pick its graph shape.
Exam Note: Write each relation, then name its curve shape.
Question 4.1.3. Match Column A with Column B and select the correct answer from the codes given below the columns.
| Column A | Column B |
|---|---|
| (i) Boltzmann constant | (a) ML2T–1 |
| (ii) Coefficient of viscosity | (b) ML–1T–1 |
| (iii) Planck constant | (c) MLT–3K–1 |
| (iv) Thermal conductivity | (d) ML2T–2K–1 |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (c) | (a) | (b) | (d) |
| Q → | (c) | (b) | (a) | (d) |
| R → | (d) | (b) | (a) | (c) |
| S → | (d) | (a) | (b) | (c) |
Solution. (i) Energy = (3/2)kT ≡ ML2T–2, so [k] = ML2T–2/Temperature = ML2T–2K–1.
(ii) F = 6πηrv ⇒ η = ML–1T–1.
(iii) Energy = hν ⇒ h = ML2T–1.
(iv) Q = K(Δθ/Δx)At ⇒ [K] = MLT–3K–1.
Thus (i) → (d), (ii) → (b), (iii) → (a), (iv) → (c). Code R is correct.
Teacher's Note: Get each dimension from a defining formula: E ~ kT, F = 6πηrv, E = hν, Q = KA(Δθ/Δx)t.
Exam Note: Quote the formula used; state code R.
Question 4.1.4. A person in a lift is holding a water jar which has a small hole at the lower end of its side. When the lift is at rest, the water jet coming out of the hole hits the floor of the lift at a distance d of 1.2 m from the person. The states of the lift's motion are given in Column A and the distances where the water jet hits the floor are given in Column B. Match the statements in Column A with those in Column B and select the correct code.
| Column A | Column B |
|---|---|
| (i) The lift is accelerating vertically up. | (a) d = 1.2 m |
| (ii) The lift is accelerating vertically down with an acceleration less than the gravitational acceleration. | (b) d > 1.2 m |
| (iii) The lift is moving vertically up with a constant speed. | (c) d < 1.2 m |
| (iv) The lift is falling freely. | (d) No water leaks out of the jar. |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(b) | (ii)–(c) | (iii)–(b) | (iv)–(d) |
| Q → | (i)–(b) | (ii)–(c) | (iii)–(a) | (iv)–(d) |
| R → | (i)–(a) | (ii)–(a) | (iii)–(a) | (iv)–(d) |
| S → | (i)–(b) | (ii)–(c) | (iii)–(a) | (iv)–(a) |
Solution. In column A, in situations (i), (ii) and (iii), no horizontal velocity is imparted to the falling water, so d remains the same. Hence (i) → (a), (ii) → (a), (iii) → (a).
For free fall in situation (iv), the effective value of g is zero, so no water leaks out of the jar: (iv) → (d).
Code R is correct.
Teacher's Note: Pressure and fall time both scale with effective g, so horizontal range is unchanged unless g_eff = 0.
Exam Note: Effective g changes cancel in range; free fall stops leakage.
Question 4.1.5. A block of mass m1 = 1 kg and another one of mass m2 = 2 kg are placed together on an inclined plane with an angle of inclination θ (figure: m1 lies up the slope against m2). Various values of θ are given in Column A. The coefficient of friction between the block m1 and the plane is always zero. The coefficients of static and dynamic frictions between the block m2 and the plane are equal to μ = 0.3. In Column B, the expressions for the friction on the block m2 are given. Match the correct expressions of friction in Column B with the angles in Column A, and choose the correct code. [Useful information: tan 5.5° ≈ 0.1, tan 11.5° ≈ 0.2, tan 16.5° ≈ 0.3]
| Column A | Column B |
|---|---|
| (i) θ = 5° | (a) m2g sin θ |
| (ii) θ = 10° | (b) (m1 + m2)g sin θ |
| (iii) θ = 15° | (c) μm2g cos θ |
| (iv) θ = 20° | (d) μ(m1 + m2)g cos θ |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(a) | (ii)–(a) | (iii)–(a) | (iv)–(c) |
| Q → | (i)–(b) | (ii)–(b) | (iii)–(b) | (iv)–(c) |
| R → | (i)–(b) | (ii)–(b) | (iii)–(b) | (iv)–(d) |
| S → | (i)–(b) | (ii)–(b) | (iii)–(c) | (iv)–(c) |
Solution. Condition for not sliding: fmax > (m1 + m2)g sin θ ⇒ μN > (m1 + m2)g sin θ ⇒ 0.3 m2g cos θ ≥ 3g sin θ. With m2 = 2 kg and g = 10 m s–2 this gives 6 ≥ 30 tan θ ⇒ tan θ ≤ 0.2, θ ≈ 11°.
For (i) and (ii), f = (m1 + m2)g sin θ. For (iii) and (iv), F = fmax = μm2g cos θ.
Thus (i) → (b), (ii) → (b), (iii) → (c), (iv) → (c). Combining all, code S is correct.
Teacher's Note: Compare 0.3×2cosθ with 3sinθ: static friction balances the pair below tanθ = 0.2; above it, kinetic μN.
Exam Note: Find limiting angle tanθ = 0.2 first.
Question 4.1.6. A particle of unit mass is moving along the x-axis under the influence of a force and its total energy is conserved. Four possible forms of the potential energy of the particle are given in Column A (a and U0 are constants). Match the potential energies in Column A with the corresponding statement(s) in Column B.
| Column A | Column B |
|---|---|
| (i) U1(x) = (U0/2)[1 – (x/a)2]2 | (a) The force acting on the particle is zero at x = a. |
| (ii) U2(x) = (U0/2)(x/a)2 | (b) The force acting on the particle is zero at x = 0. |
| (iii) U3(x) = (U0/2)(x/a)2 exp[–(x/a)2] | (c) The force acting on the particle is zero at x = –a. |
| (iv) U4(x) = (U0/2)[x/a – (1/3)(x/a)3] | (d) The particle experiences an attractive force towards x = 0 in the region |x| < a. |
| (e) The particle with total energy U0/4 can oscillate about the point x = –a. |
Solution. (i) Fx = –dU/dx = –(U0/2)·2(1 – x2/a2)(–2x/a2) = (2U0/a4)(x – a)x(x + a). F(x) is zero at x = 0, ±a. The correct options are (a), (b), (c) and (e).
(ii) Fx = –dU/dx = –(U0/a2)x, a straight line of negative slope through the origin. The correct options are (b) and (d).
(iii) Fx = –dU/dx = U0 e–x²/a²·(1/a4)(x + a)x(x – a). The correct options are (a), (b), (c) and (d).
(iv) Fx = –dU/dx = (U0/2a3)(x – a)(x + a). Corrected: the book prints a minus sign in front, but –dU/dx gives the plus sign (F is negative for |x| < a, as in the book's graph). F is zero only at x = ±a. The correct options are (a), (c) and (e).
Answer: (i) → (a), (b), (c), (e); (ii) → (b), (d); (iii) → (a), (b), (c), (d); (iv) → (a), (c), (e).
Teacher's Note: Differentiate: F = –dU/dx. Zeros of F are equilibrium points; compare U at the turning points with total energy.
Exam Note: Find F = –dU/dx, then test each option.
Question 4.1.7. Column A describes some situations where a small object is in motion. Column B describes some characteristics of these motions. Match the situations in Column A with the characteristics in Column B.
| Column A | Column B |
|---|---|
| (i) The object moves along the x-axis under a conservative force in such a way that its speed and position satisfy v = C1√(C2 – x2), where C1 and C2 are positive constants. | (a) The object executes a simple harmonic motion. |
| (ii) The object moves along the x-axis in such a way that its velocity and displacement from the origin satisfy v = –Kx, where K is a positive constant. | (b) The object does not change its direction. |
| (iii) The object is attached to one end of a massless spring of a given spring constant. The other end of the spring is attached to the ceiling of an elevator. Initially everything is at rest. The elevator starts going upwards with a constant acceleration a. The motion of the object is observed from the elevator during the period it maintains the acceleration. | (c) The kinetic energy of the object keeps on decreasing. |
| (iv) The object is projected from the earth's surface vertically upwards with a speed 2√(GMe/Re), where Me is the mass of the earth and Re is the radius of the earth. Neglect forces from objects other than the earth. | (d) The object can change its direction only once. |
Solution. (i) → (a): In SHM, v = ω√(A2 – x2) ≡ C1√(C2 – x2). The object executes SHM.
(ii) → (b), (c): v = –Kx = dx/dt ⇒ x = x0e–Kt, so v = –Kx0e–Kt. The object keeps moving on the x-axis in one direction [option (b)] and its kinetic energy decreases exponentially [option (c)].
(iii) → (a): Corrected: the book prints (b). In the elevator frame the pseudo force ma acts downwards, so the equilibrium position shifts down by ma/k while the object starts at rest at the old position. It therefore oscillates about the new equilibrium with T = 2π√(m/k), i.e. it executes SHM (option a), and it reverses direction every half period, so (b) is false.
(iv) → (b), (c): Since the speed of projection is greater than the escape speed (ve = √(2GMe/Re)), the kinetic energy keeps on decreasing [option (c)], and the object does not change its direction [option (b)].
Teacher's Note: Compare each v–x relation with SHM; judge frame effects only through the shifted equilibrium; compare launch speed with escape speed.
Exam Note: Check SHM form, then escape speed 1.41√(GM/R).
Question 4.1.8. Column B shows five systems in which two objects are labelled as X and Y. Also, in each case a point P is shown. Column A lists some statements about X and/or Y. Match these statements to the appropriate system(s) from Column B.
| Column A |
|---|
| (i) The force exerted by X on Y has a magnitude Mg. |
| (ii) The gravitational potential energy of X is continuously increasing. |
| (iii) Mechanical energy of the system (X + Y) is continuously decreasing. |
| (iv) The torque of the weight of Y about the point P is zero. |
| Column B (systems; in each case a point P is shown) |
|---|
| (a) Block Y of mass M left on a fixed inclined plane X slides down it with a constant velocity. |
| (b) Two ring magnets Y and Z, each of mass M, are kept in a frictionless vertical plastic stand so that they repel each other. Y rests on the base X and Z hangs in the air in equilibrium. P is the topmost point of the stand on the common axis of the two rings. The whole system is in a lift moving up with a constant velocity. |
| (c) A pulley Y of mass m0 is fixed to a table through a clamp X. A block of mass M hangs from a string that goes over the pulley and is fixed at point P of the table. The whole system is kept in a lift moving upward with a constant velocity. |
| (d) A sphere Y of mass M is put in a nonviscous liquid X kept in a container at rest. The sphere is released and it moves down in the liquid. |
| (e) A sphere Y of mass M is falling with its terminal velocity in a viscous liquid X kept in a container. |
Solution. (i) → (a), (e): For uniform motion, Mg sin θ = f = μMg cos θ ⇒ μ = tan θ. Net force on the block Y by the incline X is √(f2 + N2) = √(M2g2sin2θ + M2g2cos2θ) = Mg [option (a)]. Weight (Mg) = Fviscous + Fbuoyancy [option (e)].
(ii) → (b), (d), (e): The lift moves up, so the gravitational potential energy of X goes on increasing [option (b)]. Similarly for options (d) and (e).
(iii) → (a), (c), (e): Block Y moves down, so the gravitational potential energy of the system (X + Y) goes on decreasing [option (a)]. The same is true for (c) and (e).
(iv) → (b): The weight of Y passes through P, so its torque about P is zero [option (b)].
Teacher's Note: Check contact force, rising or falling centre of mass, and weight line through P.
Exam Note: Say which forces balance; name which energy changes.
Question 4.2.1. One mole of a monatomic gas is taken through a cycle ABCDA as shown in the p–V diagram (A = (3V, 3p), B = (V, 3p), C = (V, p), D = (9V, p); AB isobaric, BC isochoric, CD isobaric, DA a curve with TA = TD). Column B gives the characteristics involved in the cycle. Match them with each of the processes given in Column A.
| Column A | Column B |
|---|---|
| (i) Process A → B | (a) Internal energy decreases |
| (ii) Process B → C | (b) Internal energy increases |
| (iii) Process C → D | (c) Heat is lost |
| (iv) Process D → A | (d) Heat is gained |
| (e) Work is done on the gas |
Solution. (i) Process A → B: isobaric compression [options (a), (c), (e)].
(ii) Process B → C: isochoric decrease in pressure [options (a), (c)].
(iii) Process C → D: isobaric expansion [options (b), (d)].
(iv) Process D → A: polytropic compression with TA = TD [options (c), (e)].
Teacher's Note: Isobaric compression cools the gas, loses heat and has work done on it; isochoric pressure drop has no work.
Exam Note: Name each process type, then read U, Q, W signs.
Question 4.2.2. One mole of a monatomic ideal gas is taken along two cyclic processes E → F → G → E and E → F → H → E, as shown in the p–V diagram (E = (V0, p0), F = (V0, 32p0); G and H lie on the line p = p0 with G farther right; not to scale). The processes involved are purely isochoric, isobaric, isothermal or adiabatic. Match the paths given in Column A with the magnitudes of work done given in Column B and select the correct option (only one), using the codes given below the columns.
| Column A | Column B |
|---|---|
| (i) G → E | (a) 160p0V0 ln 2 |
| (ii) G → H | (b) 36p0V0 |
| (iii) F → H | (c) 24p0V0 |
| (iv) F → G | (d) 31p0V0 |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(d) | (ii)–(c) | (iii)–(b) | (iv)–(a) |
| Q → | (i)–(d) | (ii)–(c) | (iii)–(a) | (iv)–(b) |
| R → | (i)–(c) | (ii)–(a) | (iii)–(b) | (iv)–(d) |
| S → | (i)–(a) | (ii)–(c) | (iii)–(b) | (iv)–(d) |
Solution. Let the temperature at E be T0. Process E → F is isochoric, so the temperature at F is 32T0. Process F → G is isothermal, so the temperature at G is also 32T0. Process F → H is adiabatic, so (32p0)V05/3 = p0(VH)5/3, since γ = 5/3 for a monatomic gas. Hence VH = 8V0. Since the work done is given by the area under the p–V graph, the magnitudes of work done during the processes are:
(i) G → E: p0(VG – VE) = p0(32V0 – V0) = 31p0V0.
(ii) G → H: p0(VG – VH) = p0(32V0 – 8V0) = 24p0V0.
(iii) F → H: (1/(γ – 1))(pFVF – pHVH) = (3/2)(32p0V0 – 8p0V0) = 36p0V0.
(iv) F → G: RT ln(VG/VF) = pFVF ln(pF/pG) = 32p0V0 ln 32 = 32p0V0(5 ln 2) = 160p0V0 ln 2.
Hence code P is correct.
Teacher's Note: Find VH = 8V0 from pV5/3 = const, then use area under each path.
Exam Note: Use pV^γ for adiabat; isothermal W = nRT ln.
Question 4.2.3. If the heat given to a process is considered to be positive, match the following options of Column A with their corresponding options of Column B. (Cycle in the p–V diagram: A (10 m3, 30 atm) → B (10, 10) → C (20, 10) → D (20, 20) → A, with D → A a straight line.)
| Column A | Column B |
|---|---|
| (i) A → B | (a) ΔW > 0 |
| (ii) B → C | (b) ΔQ < 0 |
| (iii) C → D | (c) ΔW < 0 |
| (iv) D → A | (d) ΔQ > 0 |
Solution. (i) → (b): AB is an isochoric process, ΔW = 0 and heat is expelled.
(ii) → (a), (d): BC is an isobaric expansion, work is done by the gas (ΔW > 0). Heat is absorbed (ΔQ > 0).
(iii) → (d): CD is an isochoric process with increase in pressure (p ∝ T); temperature increases, heat is absorbed, so ΔQ > 0.
(iv) → (b), (c): DA represents compression, so ΔW < 0. TD = pDVD/nR = (20)(20)/nR = 400/nR; TA = pAVA/nR = (30)(10)/nR = 300/nR. Since TA < TD, heat is expelled, ΔQ < 0.
Teacher's Note: Vertical lines have W = 0; sign of ΔQ follows ΔU + W, with ΔU from pV ∝ T.
Exam Note: Compute pV at end points to get ΔU sign.
Question 4.2.4A. An ideal gas is undergoing a cyclic thermodynamic process in different ways as shown in the corresponding p–V diagrams in Column C of the table. Consider only the path from state 1 to state 2. W denotes the corresponding work done on the system. The equations and plots in the table have standard notations as used in thermodynamic processes. Here γ is the ratio of the heat capacities at constant pressure and constant volume. The number of moles in the gas is n. (Column C diagrams: (a) horizontal line from 1 to 2, constant pressure; (b) steep curve falling from 1 to 2, adiabatic; (c) gently falling curve from 1 to 2, isothermal; (d) vertical line between 1 and 2, constant volume.)
| Column A | Column B | Column C |
|---|---|---|
| (i) W1→2 = (1/(γ–1))(p2V2 – p1V1) | (i) Isothermal | (a) |
| (ii) W1→2 = –pV2 + pV1 | (ii) Isochoric | (b) |
| (iii) W1→2 = 0 | (iii) Isobaric | (c) |
| (iv) W1→2 = –nRT ln(V2/V1) | (iv) Adiabatic | (d) |
4A. Which of the following options is the only correct representation of a process, where ΔU = ΔQ – pΔV? [P] → (ii) (iv) (c); [Q] → (ii) (iii) (a); [R] → (ii) (iii) (d); [S] → (iii) (iii) (a).
Solution. In the isobaric process (iii), W1→2 = pV1 – pV2 ...(ii). Pressure remains constant, (a). Hence code Q.
Teacher's Note: Match the work formula –p(V₂–V₁) to the isobaric process and its horizontal p–V line.
Exam Note: Constant p gives W = –pΔV; answer Q.
Question 4.2.4B. Using the table of Question 4.2.4A: 4B. Which one of the following options is the correct combination? [P] → (iii) (ii) (d); [Q] → (ii) (iv) (c); [R] → (ii) (iv) (a); [S] → (iv) (ii) (d).
Solution. W1→2 = 0, (iii), is applicable for an isochoric process [(ii) and (d)]: hence code P.
Teacher's Note: Zero work means constant volume: a vertical line on the p–V diagram.
Exam Note: W = 0 implies isochoric; answer P.
Question 4.2.4C. Using the table of Question 4.2.4A: 4C. Which one of the following options correctly represents a thermodynamic process that is used as a correction in the determination of the speed of sound in an ideal gas? [P] → (iii) (iv) (c); [Q] → (i) (ii) (b); [R] → (iv) (ii) (c); [S] → (i) (iv) (b).
Solution. Expression for the work done during adiabatic expansion, W1→2 = (1/(γ – 1))(p2V2 – p1V1), corresponds to options (i) and (iv) respectively and is also represented by (b). Thus code S.
Teacher's Note: Sound in a gas is adiabatic (Laplace correction), so use the pV^γ work formula and steep curve.
Exam Note: Laplace: sound is adiabatic; answer S.
Question 4.2.5. Column A contains a list of processes involving expansion of an ideal gas. Match these with the thermodynamic changes during the processes as described in Column B.
| Column A | Column B |
|---|---|
| (i) An insulated container has two chambers separated by a valve. Chamber I contains an ideal gas and chamber II has vacuum. The valve is opened. | (a) The temperature of the gas decreases. |
| (ii) An ideal monatomic gas expands to twice its original volume such that its pressure p ∝ 1/V2, where V is the volume of the gas. | (b) The temperature of the gas increases or remains constant. |
| (iii) An ideal monatomic gas expands to twice its original volume such that its pressure p ∝ 1/V4/3, where V is its volume. | (c) The gas loses heat. |
| (iv) An ideal monatomic gas expands such that its pressure p and volume V follow the behaviour shown in the graph (p rises as a convex curve as V goes from V1 to 2V1). | (d) The gas gains heat. |
Solution. (i) → (b): Opening the valve causes free expansion under adiabatic condition, for which ΔQ = 0, ΔW = 0, ΔU = 0, so the temperature of the gas remains constant.
(ii) → (a), (c): Given p = k/V2 and pV = nRT ⇒ V = k/(nRT) ⇒ VT = constant. When V → 2V, T → T/2. Change in internal energy ΔU = nCVΔT = n(3R/2)(–T/2) = –(3/4)nRT = –(3/4)(k/V). Work done by the gas ΔW = ∫V2V (k/V2) dV = k/(2V). From the first law, ΔQ = ΔU + ΔW = –k/(4V). Corrected: the book prints –k/4 (the factor 1/V is missing). Heat is expelled.
(iii) → (a), (d): Given p = k/V4/3 and p = nRT/V ⇒ k/V1/3 = nRT. During expansion V → 2V, T → T/21/3 < T, so T decreases [option (a)]. ΔU = n(3R/2)T(1/21/3 – 1) = (3k/(2V1/3))(1/21/3 – 1). Work done ΔW = k∫V2V dV/V4/3 = (3k/V1/3)(1 – 1/21/3). Then ΔQ = ΔU + ΔW = (3k/(2V1/3))(1 – 1/21/3). Corrected: the book prints the last factor as (1 – 1/22/3); working it out gives (1 – 1/21/3). Either way ΔQ > 0 [option (d)].
(iv) → (b), (d): p1V1 = nRT1; p2(2V1) = nRT2. ∴ T2/T1 = 2p2/p1 ⇒ T2 > T1. ΔU = nCV(T2 – T1) > 0; ΔW = area under the p–V diagram is positive during expansion, so heat ΔQ > 0 (absorption).
Teacher's Note: Use pV = nRT with the given p–V law to track T, then add ΔU and W for Q.
Exam Note: Free expansion keeps T; others need ΔU + W.
4.3 Sound Waves
Question 4.3.1. Column A shows four systems, each with the same length L, for producing standing waves. The lowest possible natural frequency is called its fundamental frequency, whose wavelength is denoted as λf. Match each system in Column A with statements given in Column B describing the nature and wavelength of the standing waves. (Systems: (i) pipe closed at one end; (ii) pipe open at both ends; (iii) stretched wire clamped at both ends; (iv) stretched wire clamped at both ends and at the midpoint L/2.)
| Column A | Column B |
|---|---|
| (i) Pipe closed at one end | (a) Longitudinal waves |
| (ii) Pipe open at both ends | (b) Transverse waves |
| (iii) Stretched wire clamped at both ends | (c) λf = L |
| (iv) Stretched wire clamped at both ends and at midpoint | (d) λf = 2L |
| (e) λf = 4L |
Solution. (i) → (a), (e): Closed organ pipe: longitudinal wave; λf = 4L.
(ii) → (a), (d): Open organ pipe: longitudinal wave; λf = 2L.
(iii) → (b), (d): Stretched string clamped at both ends: transverse wave; λf = 2L.
(iv) → (b), (c): String clamped at both ends and at midpoint: transverse wave; λf = L.
Teacher's Note: Fundamental: closed pipe L = λ/4, open pipe and string L = λ/2; the midpoint node makes L = λ.
Exam Note: Pipes are longitudinal; strings transverse.
4.4 Electrostatics
Question 4.4.1. Four charges Q1, Q2, Q3 and Q4 of the same magnitude are fixed along the x-axis at x = –2a, –a, +a and +2a respectively. A positive charge q is placed on the positive y-axis at a distance b > 0. Four options of the signs of these charges are given in Column A. The direction of the forces on the charge q is given in Column B. Match Column A with Column B and select the correct answer using the codes given below the columns.
| Column A | Column B |
|---|---|
| (i) Q1, Q2, Q3, Q4 all positive | (a) +x |
| (ii) Q1, Q2 positive; Q3, Q4 negative | (b) –x |
| (iii) Q1, Q4 positive; Q2, Q3 negative | (c) +y |
| (iv) Q1, Q3 positive; Q2, Q4 negative | (d) –y |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(c) | (ii)–(a) | (iii)–(d) | (iv)–(b) |
| Q → | (i)–(d) | (ii)–(b) | (iii)–(c) | (iv)–(a) |
| R → | (i)–(c) | (ii)–(a) | (iii)–(b) | (iv)–(d) |
| S → | (i)–(d) | (ii)–(b) | (iii)–(a) | (iv)–(c) |
Solution. (i) → (c): The x-components of the forces will cancel out and the net force will act along the +y-axis.
(ii) → (a): The y-components of the forces will cancel out and the net force will act along the +x-axis.
(iii) → (d): The x-components of the forces cancel out and the net force will act along the –y-axis.
(iv) → (b): The y-components of the forces will cancel out and the net force will be along the –x-axis.
Combining all, code P is correct.
Teacher's Note: Use symmetry: equal-distance charge pairs cancel one component; nearer charges dominate the other.
Exam Note: Resolve components; cancel symmetric pairs; answer P.
4.5 Current Electricity and Magnetism
Question 4.5.1. You are given many resistors, capacitors and inductors. These are connected to a variable DC voltage source (the first two circuits) or an AC voltage source of 50 Hz frequency (the next three circuits) in different ways as shown in Column B. When a current I (steady state for DC or rms for AC) flows through the circuit, the corresponding voltages V1 and V2 (indicated in circuits) are related as shown in Column A. Match the two.
| Column A |
|---|
| (i) I ≠ 0, V1 is proportional to I |
| (ii) I ≠ 0, V2 > V1 |
| (iii) V1 = 0, V2 = V |
| (iv) I ≠ 0, V2 is proportional to I |
| Column B circuit | Elements (V1 across the first element, V2 across the second) |
|---|---|
| (a) | 6 mH inductor in series with a 3 μF capacitor, connected to a variable DC source V |
| (b) | 6 mH inductor in series with a 2 Ω resistor, variable DC source V |
| (c) | 6 mH inductor in series with a 2 Ω resistor, AC source V (50 Hz) |
| (d) | 6 mH inductor in series with a 3 μF capacitor, AC source V (50 Hz) |
| (e) | 1 kΩ resistor in series with a 3 μF capacitor, AC source V (50 Hz) |
Solution. (i) → (c), (d), (e): Current I is zero in case (a) in steady state but I ≠ 0 for cases (b) to (e). In case (b), across the inductor V1 is not proportional to I, so (c), (d) and (e) are correct options.
(ii) → (b), (c), (d), (e): In case (b), V1 = 0 and V2 = V, so V2 > V1. In case (c), XL = ωL ≈ 1.88 Ω < R = 2 Ω ⇒ V2 > V1. In case (d), XC = 1/(ωC) = 1/(100π × 3 × 10–6 F) = 1061 Ω > XL ⇒ V2 > V1. In case (e), XC = 1061 Ω > 1 kΩ ⇒ V2 > V1.
(iii) → (a), (b): In DC, L acts as a short circuit in steady state (V1 = 0) and V2 = V.
(iv) → (b), (c), (d), (e): As explained above, I ≠ 0 and the voltage drop across the circuit elements is proportional to I.
Teacher's Note: In DC steady state L is a short; in AC compare X_L and X_C with R.
Exam Note: Compute X_L and X_C at 50 Hz.
Question 4.5.2. Match Column A with Column B.
| Column A | Column B |
|---|---|
| (i) A uniformly charged dielectric ring | (a) A time-independent electrostatic field directed out of the system |
| (ii) A uniformly charged dielectric ring rotating with an angular velocity ω | (b) A magnetic field |
| (iii) A ring carrying a constant current i0 | (c) An induced electric field |
| (iv) i = i0 cos ωt | (d) A magnetic moment |
Solution. (i) → (a): E = (1/4πε0) Qx/(R2 + x2)3/2, a time-independent electrostatic field at an axial point.
(ii) → (b), (d): A charged ring rotating uniformly is equivalent to a current I = Q/T = Qω/2π, which produces a magnetic field B = μ0IR2/(2(R2 + x2)3/2). Its magnetic moment is m = IA.
(iii) → (b), (d): Constant current i0 in the ring is the same case as in (ii), hence (b) and (d) are correct options.
(iv) → (b), (c), (d): A time-varying magnetic field is produced by time-varying current [option (b)]. The time-varying magnetic flux creates induced emf, hence an induced electric field [option (c)]; finally, m = IA [option (d)].
Teacher's Note: Static charge gives E only; moving charge is a current giving B and moment; changing current adds induced E.
Exam Note: Rotating charge = current; changing current induces E.
Question 4.5.3. Column A gives certain situations in which a straight metallic wire of resistance R is used and Column B gives some resulting effects. Match the statements in Column A with the statements in Column B.
| Column A | Column B |
|---|---|
| (i) A charged capacitor is connected to the ends of the wire. | (a) A constant current flows through the wire. |
| (ii) The wire is moved perpendicular to its length with a constant velocity in a uniform magnetic field perpendicular to the plane of its motion. | (b) Thermal energy is generated in the wire. |
| (iii) The wire is placed in a constant electric field that has its direction along the length of the wire. | (c) A constant potential difference develops between the ends of the wire. |
| (iv) A battery of constant emf is connected to the ends of the wire. | (d) Charges of constant magnitude appear at the ends of the wire. |
Solution. (i) → (b): Energy of the charged capacitor (U = Q2/2C) appears as heat in the connecting wire.
(ii) → (c), (d): Motional emf (ε = Blv) is induced in the wire. Charges of constant magnitude, ±Q, appear at the ends of the wire.
(iii) → (c), (d): Free electrons in the conducting wire experience electric force F = eE, thus charges with opposite sign accumulate at the ends. This in turn develops a potential difference across the wire.
(iv) → (a), (b), (c): Connecting a wire of resistance R across a battery causes a constant current I (= ε/R) through the wire. Heat (I2Rt) is developed. The terminal voltage V (= ε – Ir) is developed between the ends of the wire.
Teacher's Note: Decide whether the current is transient, zero or steady; charge separation gives end charges and a constant p.d.
Exam Note: Capacitor discharge is transient; battery gives steady I.
Question 4.5.4. Two wires, each carrying a steady current I, are shown in four configurations in Column A. Some of the resulting effects are described in Column B. Match the statements in the two columns. (Figures: (i) two parallel straight wires with currents in the same direction, P between them; (ii) two coaxial circular wires of equal radii with currents as drawn, P at the midpoint of the line joining their centres; (iii) the same two circular wires with currents as drawn, P at the midpoint; (iv) two concentric circular wires with currents in opposite senses, P at the common centre.)
| Column A | Column B |
|---|---|
| (i) P is situated between the wires. | (a) The magnetic field (B) at P due to the currents in the wires are in the same directions. |
| (ii) P is situated at the midpoint of the line joining the centres of the circular wires, which have the same radii. | (b) The magnetic fields at P due to the currents in the wires are in opposite directions. |
| (iii) P is situated at the midpoint of the line joining the centres of the circular wires, which have the same radii. | (c) There is no magnetic field at P. |
| (iv) P is situated at the common centre of the wires. | (d) The wires repel each other. |
Solution. (i) → (b), (c): Magnetic field at P due to two straight currents which are in opposite directions [option (b)]; if P is at the midpoint, B = 0 [option (c)].
(ii) → (a): Magnetic moment (m = IA) due to both the coils is towards the right, so the magnetic field at P is in the same direction.
(iii) → (b), (c): Magnetic fields at P are due to two coils which are in opposite directions [option (b)]. For symmetrical position of P, B = 0 [option (c)].
(iv) → (b): Magnetic fields at P are due to two concentric circular coils which are in opposite directions and unequal in magnitude.
Teacher's Note: Apply the right-hand rule to each wire at P; equal opposite fields at the midpoint cancel.
Exam Note: Direction of each field first, then magnitude.
Question 4.5.5. Six point charges, each of the same magnitude q, are arranged in different manners as shown in Column B. Let E be the electric field and V be the electric potential at M (potential at infinity is zero) due to the given charge distribution when it is at rest. The whole system is set into rotation with a constant angular velocity about the line PQ. Let B be the magnetic field at M and μ be the magnetic moment of the system in this condition. Assume each rotating charge to be equivalent to a steady current. Column B arrangements: (a) charges at the corners of a regular hexagon with alternating signs, M at the centre, PQ perpendicular to the plane of the hexagon; (b) charges on a line perpendicular to PQ at equal intervals with alternating signs (– + – | + – +), M the midpoint between the two innermost charges; (c) charges on two coplanar insulating concentric rings at equal intervals, M the common centre, PQ perpendicular to the plane of the rings; (d) charges at the corners of a rectangle of sides a and 2a (– at corners) and + at the midpoints of the long sides, M at the centre, PQ parallel to the longer sides; (e) charges on two coplanar identical insulating rings at equal intervals (+ on one, – on the other), M the midpoint between the centres, PQ perpendicular to the line joining the centres and coplanar with the rings.
| Column A |
|---|
| (i) E = 0 |
| (ii) V ≠ 0 |
| (iii) B = 0 |
| (iv) μ ≠ 0 |
Solution. (i) → (a), (c), (d): Field E = 0 for the charge distribution.
(ii) → (c), (d): Potential is nonzero.
(iii) → (a), (b), (e): Magnetic field is produced by a current loop. Net current during rotation in each of (a), (b) and (e) is zero, so B = 0.
(iv) → (c), (d): Magnetic moment m = IA will be nonzero if m ≠ 0, so I ≠ 0, which is true for (c) and (d) only.
Teacher's Note: E and V come from the static arrangement; B and μ need net rotating charge, i.e. a nonzero net current.
Exam Note: Static E, V versus rotating net current.
Question 4.5.6A. A charged particle (electron or proton) is introduced at the origin (x = 0, y = 0, z = 0) with a given initial velocity v. A uniform electric field E and a uniform magnetic field B exist everywhere. The velocity v, electric field E and magnetic field B are given in Columns A, B and C respectively. The quantities E0 and B0 are positive in magnitude.
| Column A (velocity) | Column B (electric field) | Column C (magnetic field) |
|---|---|---|
| (i) Electron with v = (2E0/B0) x̂ | (i) E = E0 ẑ | (a) B = –B0 x̂ |
| (ii) Electron with v = (E0/B0) ŷ | (ii) E = –E0 ŷ | (b) B = B0 x̂ |
| (iii) Proton with v = 0 | (iii) E = –E0 x̂ | (c) B = B0 ŷ |
| (iv) Proton with v = (2E0/B0) x̂ | (iv) E = E0 x̂ | (d) B = B0 ẑ |
6A. In which case will the particle move in a straight line with a constant velocity? [P] → (ii) (iii) (d); [Q] → (iv) (i) (d); [R] → (iii) (ii) (c); [S] → (iii) (iii) (a).
Solution. For a constant velocity the net force must be zero: F = FE + FB = q[E + (v × B)] = 0, so E = –(v × B).
Check option P: v = (E0/B0) ŷ and B = B0 ẑ give v × B = E0(ŷ × ẑ) = E0 x̂, which cancels E = –E0 x̂. The net force is zero.
Option R fails: a particle at rest (v = 0) with E = –E0 ŷ feels a force qE ≠ 0. Option Q: v × B = (2E0/B0)B0(x̂ × ẑ) = –2E0 ŷ, and E0 ẑ does not cancel it. Option S: v = 0 and E ≠ 0.
Corrected: the book gives code R; the correct answer is code P.
Teacher's Note: Zero net force needs E = –(v×B); test each code by evaluating v×B directly.
Exam Note: Evaluate v×B; a rest particle needs E = 0.
Question 4.5.6B. Using the table of Question 4.5.6A: 6B. In which case will the particle describe a helical path with axis along the positive z-direction? [P] → (ii) (iii) (c); [Q] → (iv) (ii) (c); [R] → (iv) (i) (d); [S] → (iii) (iii) (a).
Solution. v = (2E0/B0) x̂, E = E0 ẑ, B = B0 ẑ. Since the velocity is along the x-direction, the magnetic field will rotate it about the z-axis and the electric field will provide the helical path. Hence code R.
Teacher's Note: A helix about z needs B along z (circular motion in the xy-plane) and E along z (drift).
Exam Note: B ∥ z circles; E ∥ z drifts; answer R.
Question 4.5.6C. Using the table of Question 4.5.6A: 6C. In which case would the particle move in a straight line along the negative direction of the y-axis (i.e., move along –ŷ)? [P] → (iv) (ii) (d); [Q] → (iii) (ii) (a); [R] → (ii) (iii) (b); [S] → (iii) (ii) (c).
Solution. Magnetic force is always zero (the proton starts at rest and then moves parallel to B = B0 ŷ) and the electric field E = –E0 ŷ will move it along the –ŷ direction. Hence code S.
Teacher's Note: Magnetic force vanishes when v is parallel to B, so E along –y gives straight-line motion.
Exam Note: Need v ∥ B and E along –y; answer S.
4.6 Ray Optics and Wave Optics
Question 4.6.1. An optical component and an object S placed along its optic axis are given in Column A. The distance between the object and the component can be varied. The properties (nature) of images are given in Column B. Match all the properties of the images from Column B with the appropriate components given in Column A.
| Column A | Column B |
|---|---|
| (i) Concave mirror (S on its axis) | (a) Real image |
| (ii) Convex mirror (S on its axis) | (b) Virtual image |
| (iii) Convex lens (S on its axis) | (c) Magnified image |
| (iv) Concavo-convex lens (S on its axis) | (d) Image at infinity |
Solution. (i) → (a), (b), (c), (d): For a concave mirror, with f ≤ u ≤ ∞, the image is real; magnified for f ≤ u ≤ 2f; virtual for u < f; at infinity for u = f.
(ii) → (b): Image formed by a convex mirror is always virtual and diminished.
(iii) → (a), (b), (c), (d): Image formed by a convex lens is real for u > f; virtual for u < f; magnified for f < u < 2f and formed at infinity for u = f.
(iv) → (a), (b), (c), (d): Image formed by a concavo-convex lens may be real, virtual, magnified and at infinity.
Teacher's Note: Vary the object distance: a converging element gives every image type; a convex mirror gives only virtual, diminished.
Exam Note: List u-ranges for each image type.
Question 4.6.2. Two transparent media of refractive indices μ1 and μ3 have a solid lens-shaped transparent material of refractive index μ2 between them as shown in the figures in Column B (μ1 on the right, μ3 on the left; a ray travels from right to left through the lens-shaped medium; shapes: (a) biconvex, (b) plano-convex, (c) concave on both sides with flat top and bottom, (d) rectangular block with a convex right face, (e) biconcave). A ray traversing these media is also shown in the figures. In Column A different relationships between μ1, μ2 and μ3 are given. Match them to the ray diagrams shown in Column B.
| Column A | Column B (ray diagram) |
|---|---|
| (i) μ1 < μ2 | (a) |
| (ii) μ1 > μ2 | (b) |
| (iii) μ2 = μ3 | (c) |
| (iv) μ2 > μ3 | (d) |
| (e) |
Solution. (i) → (a), (c): The ray bends towards the normal while passing from optically rarer to denser (μ1 < μ2) medium.
(ii) → (b), (d), (e): The ray bends away from the normal while passing from optically denser to rarer (μ1 > μ2) medium.
(iii) → (a), (c), (e): Path of the ray remains unchanged when refractive indices of the two media are same (μ2 = μ3).
(iv) → (b), (d): The ray bends away from the normal while passing from denser to rarer (μ2 > μ3) medium.
Teacher's Note: Towards the normal means entering a denser medium; away means entering a rarer one; no bend means equal indices.
Exam Note: Read each bend at each surface separately.
Question 4.6.3. Four combinations of two thin lenses are given in Column A. The radius of curvature of each curved surface is r and the refractive index of each lens is 1.5. Match the lens combination in Column A with the focal length in Column B. Select the correct answer using the codes given below the columns. (Combinations as drawn: (i) two biconvex lenses; (ii) two plano-convex lenses; (iii) two plano-concave lenses; (iv) a biconvex lens with a plano-concave lens.)
| Column A | Column B |
|---|---|
| (i) two biconvex lenses | (a) 2r |
| (ii) two plano-convex lenses | (b) r/2 |
| (iii) two plano-concave lenses | (c) –r |
| (iv) a biconvex and a plano-concave lens | (d) r |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(a) | (ii)–(b) | (iii)–(c) | (iv)–(d) |
| Q → | (i)–(b) | (ii)–(d) | (iii)–(c) | (iv)–(a) |
| R → | (i)–(d) | (ii)–(a) | (iii)–(b) | (iv)–(c) |
| S → | (i)–(b) | (ii)–(a) | (iii)–(c) | (iv)–(d) |
Solution. From 1/f = (μ – 1)(1/R1 – 1/R2), the focal lengths of the three component lenses are: biconvex f = r, plano-convex f = 2r, plano-concave f = –2r. For a lens combination, 1/f = 1/f1 + 1/f2.
(i): 1/feq = 1/r + 1/r = 2/r, feq = r/2 → (b).
(ii): 1/feq = 1/2r + 1/2r = 1/r, feq = r → (d).
(iii): 1/feq = –1/2r – 1/2r = –1/r, feq = –r → (c).
(iv): 1/feq = 1/r – 1/2r = 1/2r, feq = 2r → (a).
Code Q is correct.
Teacher's Note: Lens-maker's formula for each element, then add powers: 1/f = 1/f₁ + 1/f₂.
Exam Note: Powers add; check sign for concave faces.
Question 4.6.4. A right-angled prism of refractive index μ1 is placed in a rectangular block of refractive index μ2, which is surrounded by a medium of refractive index μ3, as shown in the figure. A ray of light e enters the rectangular block at normal incidence. Depending upon the relationships between μ1, μ2 and μ3, it takes one of the four possible paths ef, eh, eg or ei. (In the figure the prism's 45° face meets the ray; path ef leaves upward, eg is straight on, eh leaves downward, ei returns back along the incoming line.) Match the paths in Column A with the conditions of refractive indices in Column B and select the correct answer using the codes given below the columns.
| Column A | Column B |
|---|---|
| (i) e → f | (a) μ1 > √2 μ2 |
| (ii) e → g | (b) μ2 > μ1 and μ2 > μ3 |
| (iii) e → h | (c) μ1 = μ2 |
| (iv) e → i | (d) μ2 < μ1 < √2 μ2 and μ2 > μ3 |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (i)–(b) | (ii)–(c) | (iii)–(a) | (iv)–(d) |
| Q → | (i)–(a) | (ii)–(b) | (iii)–(d) | (iv)–(c) |
| R → | (i)–(d) | (ii)–(a) | (iii)–(b) | (iv)–(c) |
| S → | (i)–(b) | (ii)–(c) | (iii)–(d) | (iv)–(a) |
Solution. (i) → (b): μ2 > μ1 ... (towards the normal); μ2 > μ3 ... (away from the normal).
(ii) → (c): μ1 = μ2 ... (no change in path).
(iii) → (d): μ1 > μ2 ... (away from the normal); μ2 > μ3 ... (away from the normal); μ1 × (1/√2) = μ2 sin r ⇒ sin r = μ1/(√2 μ2). Since sin r < 1, μ1 < √2 μ2.
(iv) → (a): For total reflection, 45° > θc, so sin 45° > sin θc ⇒ 1/√2 > μ2/μ1 ⇒ μ1 > √2 μ2.
Hence code S is the correct answer.
Teacher's Note: At the 45° face apply Snell and the critical-angle condition: total reflection needs μ₁ > √2 μ₂.
Exam Note: Use Snell at 45° and sinθc = μ₂/μ₁.
Question 4.6.5. A simple telescope used to view distant objects has eyepiece and objective lens of focal lengths fe and fo respectively. Match the columns A and B.
| Column A | Column B |
|---|---|
| (i) Intensity of light received by the lens | (a) Radius of aperture (R) |
| (ii) Angular magnification | (b) Dispersion of lens |
| (iii) Length of telescope | (c) Focal length fo, fe |
| (iv) Sharpness of image | (d) Spherical aberration |
Solution. (i) → (a): Intensity ∝ aperture (R).
(ii) → (c): Angular magnification = fo/fe.
(iii) → (c): Length of telescope = fo ± fe.
(iv) → (a), (b), (d): Sharpness of image depends on aperture [option (a)], dispersion [option (b)] and spherical aberration [option (d)].
Teacher's Note: Light grasp grows with aperture; M = fo/fe; image quality is hit by aberrations and aperture (diffraction).
Exam Note: Aperture gives brightness; focal lengths give M and length.
Question 4.6.6. The figures in Column A relate to Young's double-slit arrangement with the screen placed far away from the slits S1 and S2. In each of these cases, S1P0 = S2P0, S1P1 – S2P1 = λ/4 and S1P2 – S2P2 = λ/3, where λ is the wavelength of the light used. In (ii), (iii) and (iv), a transparent sheet of refractive index n and thickness t is pasted on the slit S2. The thickness of the sheets are different in different cases (figures: slits S1 and S2 on the left, screen on the right with P0, P1, P2 in that order upward; the sheet is drawn at S2 in (ii)–(iv)). The phase difference between the light waves reaching a point P on the screen from the two slits is denoted by δ(P) and the intensity by I(P). Match the columns A and B.
| Column A | Column B |
|---|---|
| (i) No sheet | (a) δ(P0) = 0 |
| (ii) (n – 1)t = λ/4 | (b) δ(P1) = 0 |
| (iii) (n – 1)t = λ/2 | (c) I(P1) = 0 |
| (iv) (n – 1)t = 3λ/4 | (d) I(P0) > I(P1) |
| (e) I(P2) > I(P1) |
Solution. (i) → (a), (d): Path difference Δ = S1P0 – S2P0 = 0, so phase difference δ(P0) = (2π/λ)·Δ = 0. I(P0) = 4I0, where I0 = intensity due to each source. I(P1) = 2I0(1 + cos φ) = 4I0cos2(φ/2) = 2I0 ⇒ I(P0) > I(P1).
(ii) → (b): Path difference at P1 is Δ = S1P1 – [S2P1 + (n – 1)t] = (S1P1 – S2P1) – λ/4 = λ/4 – λ/4 = 0. ∴ δ(P1) = 0.
(iii) → (e): Path difference at P1 is λ/4 – λ/2 = –λ/4, so φ = –π/2. ∴ I(P1) = 2I0. For point P2, Δ = S1P2 – [S2P2 + (n – 1)t] = λ/3 – λ/2 = –λ/6, so φ = –π/3. ∴ I(P2) = I0 + I0 + 2I0cos(–π/3) = 3I0. Corrected: the book concludes "3I0 < 2I0 ⇒ I(P2) < I(P1)", which is wrong; 3I0 > 2I0, so I(P2) > I(P1), giving option (e).
(iv) → (c), (d), (e): Path difference at P1 = λ/4 – 3λ/4 = –λ/2, so φ = –π. ∴ I(P1) = 2I0(1 + cos φ) = 0 [option (c)]. For P0, Δ = S2P0 + (n – 1)t – S1P0 = 3λ/4, so φ = 3π/2 and I(P0) = 2I0(1 + cos 3π/2) = 2I0 ⇒ I(P0) > I(P1) [option (d)]. At P2, Δ = λ/3 – 3λ/4 = –5λ/12, φ = –5π/6, cos φ = –√3/2; I(P2) = 2I0(1 – √3/2) ⇒ I(P2) > I(P1) [option (e)].
Teacher's Note: Net path difference = geometric difference minus (n–1)t; then I = 2I0(1 + cos φ).
Exam Note: Compute φ at each point, then I = 2I0(1+cosφ).
4.7 Modern Physics
Question 4.7.1. Match Column A showing the nuclear processes with Column B containing the parent nucleus and one of the end products of each process, and then select the correct answer using the codes given below the columns.
| Column A | Column B |
|---|---|
| (i) Alpha decay | (a) 158O → 157N + ... |
| (ii) β+ decay | (b) 23892U → 23490Th + ... |
| (iii) Fission | (c) 18583Bi → 18482Pb + ... |
| (iv) Proton emission | (d) 23994Pu → 14057La + ... |
| Code | (i) | (ii) | (iii) | (iv) |
|---|---|---|---|---|
| P → | (d) | (b) | (a) | (c) |
| Q → | (a) | (c) | (b) | (d) |
| R → | (b) | (a) | (d) | (c) |
| S → | (d) | (c) | (b) | (a) |
Solution. (i) → (b): In α-decay, AZX → A–4Z–2Y + ...
(ii) → (a): In β+-decay, charge number reduces by 1 and mass number remains unchanged.
(iii) → (d): In a fission reaction, the heavy nucleus splits into two lighter nuclei as in 23994Pu → 14057La + ... (the book's hint prints the parent as U; Column B shows Pu, which has Z = 94).
(iv) → (c): In proton (11H) emission, charge number and mass number both reduce by 1 as in 18583Bi → 18482Pb + ... (the hint prints Po, but Z = 82 is lead, as in Column B).
Hence code R is correct.
Teacher's Note: Check A and Z conservation: α removes 4 and 2, β⁺ lowers Z by 1.
Exam Note: Balance A and Z for each reaction.
Question 4.7.2. Match the nuclear processes given in Column A with the appropriate option(s) in Column B.
| Column A | Column B |
|---|---|
| (i) Nuclear fusion | (a) Absorption of thermal neutrons by 23592U |
| (ii) Fission in a nuclear reactor | (b) 6027Co nucleus |
| (iii) β-Decay | (c) Energy production starts via the conversion of hydrogen into helium |
| (iv) γ-Ray emission | (d) Heavy water |
| (e) Neutrino emission |
Solution. (i) → (c), (e): In a fusion reaction, the lighter nuclei fuse to form heavier nuclei with neutrino emission.
(ii) → (a), (d): Absorption of thermal neutrons (10n) by 23592U produces fission. Heavy water is used to slow down the fast-moving neutrons.
(iii) → (b), (e): Unstable 6027Co nucleus disintegrates with emission of β-particle and neutrino.
(iv) → (c): During a fusion reaction, γ-rays are emitted.
Teacher's Note: Link each process to its reactor or stellar context: moderator for fission, hydrogen-to-helium for fusion, neutrino with β.
Exam Note: Match process to its standard example.
Question 4.7.3. Match the following.
| Column A | Column B |
|---|---|
| (i) The transition of a hydrogen atom from one energy level to another | (a) Characteristic X-rays |
| (ii) Electron emission from a material | (b) Photoelectric effect |
| (iii) Moseley's law | (c) Hydrogen spectrum |
| (iv) Change of photon energy into the kinetic energy of electrons | (d) β-Decay |
Solution. (i) → (a), (c): Transition between two energy levels occurs in the hydrogen spectrum and when characteristic X-rays are produced.
(ii) → (b), (d): β-decay is electron emission; photoelectric effect also occurs with electron emission.
(iii) → (a): Moseley's law relates the wavelength of characteristic X-rays.
(iv) → (b): From Einstein's equation hν = φ0 + ½mvmax2.
Teacher's Note: Level-to-level transitions explain spectra and characteristic X-rays; electron emission includes β and photoelectrons.
Exam Note: Match each phenomenon to its governing law.
Question 4.7.4. Column B gives certain systems, each undergoing a process. Column A suggests changes in some of the parameters related to the systems. Match the statements in Column A with the appropriate process(es) in Column B.
| Column A | Column B |
|---|---|
| (i) The energy of the system is increased. | (a) System: a capacitor initially uncharged. Process: connected to a battery. |
| (ii) Mechanical energy provided to the system is converted into energy of random motion of its parts. | (b) System: a gas in an adiabatic container fitted with an adiabatic piston. Process: the gas is compressed by pushing the piston. |
| (iii) Internal energy of the system is converted into mechanical energy. | (c) System: a gas in a rigid container. Process: the gas getting cooled due to colder atmosphere surrounding it. |
| (iv) Mass of the system is decreased. | (d) System: a heavy nucleus, initially at rest. Process: nuclear fission, two fragments of nearly equal masses and some neutrons emitted. |
| (e) System: a resistance-wire loop. Process: the loop placed in a time-varying magnetic field perpendicular to its plane. |
Solution. (i) → (a), (b), (e): Energy of a charged capacitor = Q2/2C. Adiabatic compression increases the internal energy. Time-varying magnetic field induces an electric field and the induced current dissipates heat.
(ii) → (b): Same as in case (i).
(iii) → (d): During fission, energy is released due to loss in mass.
(iv) → (d): Same as in case (iii).
Teacher's Note: Identify energy flow in each system: stored field energy, work into heat, or mass-energy released in fission.
Exam Note: Trace energy form changes in each system.
JEE Mathematics: SB Mathur Solutions for SB Mathur Physics Solutions Chapter 4 Matrix Matching Type Questions
Access JEE Mathematics Solutions
Explore reliable mathematical solutions for SB Mathur Physics Solutions Chapter 4 Matrix Matching Type Questions tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for JEE
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.