Pradeep's KL Gogia Solutions Physics Chapter 15 Simple Harmonic Motion

Download Class 11 Physics Pradeep's KL Gogia Textbook Solutions: Chapter 15 Simple Harmonic Motion

Explore reliable textbook solutions for Chapter 15 Simple Harmonic Motion tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Pradeep's KL Gogia Textbook Answers and Solutions

View or download the dedicated Chapter 15 Simple Harmonic Motion solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Simple Harmonic Motion - Sample Problems

Sample problems based on Displacement

Question 1. A simple harmonic oscillator has amplitude A and time period T. The time required by it to travel from x = A to x = A/2 is (a) T/6 (b) T/4 (c) T/3 (d) T/2 [CBSE 1992; SCRA 1996]

Solution. Answer (a). Because the S.H.M. starts from the extreme position, use y = a cos ωt. A/2 = A cos(2πt/T) ⇒ cos(π/3) = cos(2πt/T) ⇒ t = T/6.

Teacher's Note: Starting at an extreme point means a cosine form; solve cos θ = 1/2 for θ = π/3.

Exam Note: Use cos form from extreme; answer T/6.

Question 2. A mass m = 100 gm is attached at the end of a light spring which oscillates on a frictionless horizontal table with amplitude 0.16 m and time period 2 s. Initially the mass is released from rest at t = 0 and displacement x = −0.16 m. The expression for the displacement at any time t is (a) x = 0.16 cos(πt) (b) x = −0.16 cos(πt) (c) x = 0.16 cos(πt + π) (d) x = −0.16 cos(πt + π) [MP PMT 1995]

Solution. Answer (b). Standard equation x = a cos(2πt/T) with a = −0.16 m, T = 2 s gives x = −0.16 cos(πt).

Teacher's Note: Released from rest means an extreme position, so cosine; the sign of a carries the starting side.

Exam Note: Release from rest at negative extreme: x = −a cos ωt.

Question 3. The motion of a particle executing S.H.M. is given by x = 0.01 sin 100π(t + 0.05), where x is in metres and t in seconds. The time period is (a) 0.01 s (b) 0.02 s (c) 0.1 s (d) 0.2 s

Solution. Answer (b). Comparing with y = a sin(ωt + φ), ω = 100π, so T = 2π/ω = 2π/100π = 0.02 s.

Teacher's Note: The factor multiplying t inside the sine is ω; the 0.05 only shifts phase.

Exam Note: Read ω from coefficient of t, then T = 2π/ω.

Question 4. Two equations of two S.H.M. are x = a sin(ωt − α) and y = b cos(ωt − α). The phase difference between the two is (a) 0° (b) α° (c) 90° (d) 180° [MP PMT 1985]

Solution. Answer (c). y = b cos(ωt − α) = b sin(ωt − α + π/2). Phase difference = (ωt − α + π/2) − (ωt − α) = π/2 = 90°.

Teacher's Note: Convert cosine to sine using cos θ = sin(θ + π/2) before comparing phases.

Exam Note: Convert both to the same function first.

Sample problems based on Velocity

Question 5. A body is executing simple harmonic motion with an angular frequency 2 rad/s. The velocity of the body at 20 mm displacement, when the amplitude of motion is 60 mm, is (a) 40 mm/s (b) 60 mm/s (c) 113 mm/s (d) 120 mm/s [AFMC 1998]

Solution. Answer (c). v = ω√(a² − y²) = 2√(60² − 20²) = 2√3200 = 113 mm/s.

Teacher's Note: Use v = ω√(a² − y²); keep units in mm throughout.

Exam Note: Substitute directly into v = ω√(a²−y²).

Question 6. A body executing S.H.M. has equation y = 0.30 sin(220t + 0.64) in metres. Then the frequency and maximum velocity of the body are (a) 35 Hz, 66 m/s (b) 45 Hz, 66 m/s (c) 58 Hz, 113 m/s (d) 35 Hz, 132 m/s [CPMT]

Solution. Answer (a). Comparing with y = a sin(ωt + φ): a = 0.30, ω = 220. So 2πn = 220 ⇒ n = 35 Hz, and vmax = aω = 0.30 × 220 = 66 m/s.

Teacher's Note: Compare with the standard form to read a and ω; then n = ω/2π and v_max = aω.

Exam Note: Read a and ω by comparison.

Question 7. A particle starts S.H.M. from the mean position. Its amplitude is A and time period is T. At the time when its speed is half of the maximum speed, its displacement y is (a) A/2 (b) A/√2 (c) A√3/2 (d) 2A/√3

Solution. Answer (c). v = ω√(a² − y²) and v = vmax/2 = aω/2. So aω/2 = ω√(a² − y²) ⇒ a²/4 = a² − y² ⇒ y = √3 A/2.

Teacher's Note: Set v = aω/2 in v = ω√(a²−y²) and solve for y.

Exam Note: Half max speed gives y = (√3/2)A.

Question 8. A particle performs simple harmonic motion. The equation of its motion is x = 5 sin(4t − π/6), where x is its displacement. If the displacement of the particle is 3 units then its velocity is (a) 2π/3 (b) 5π/6 (c) 20 (d) 16 [MP PMT 1994]

Solution. Answer (d). ω = 4, a = 5, y = 3. v = ω√(a² − y²) = 4√(5² − 3²) = 16.

Teacher's Note: The phase π/6 is irrelevant here; only ω, a and y enter v = ω√(a²−y²).

Exam Note: Ignore phase constant; use 3-4-5 triangle.

Question 9. A simple pendulum performs simple harmonic motion about x = 0 with amplitude A and time period T. The speed of the pendulum at x = A/2 will be (a) πA√3/T (b) πA/T (c) πA√3/(2T) (d) 3π²A/T [MP PMT 1987]

Solution. Answer (a). v = ω√(a² − y²) = (2π/T)√(A² − A²/4) = πA√3/T.

Teacher's Note: Replace ω by 2π/T and y by A/2 in v = ω√(a² − y²).

Exam Note: Substitute ω = 2π/T carefully.

Question 10. A particle is executing S.H.M. If its amplitude is 2 m and periodic time 2 s, then the maximum velocity of the particle will be (a) 6π (b) 4π (c) 2π (d) π

Solution. Answer (c). vmax = aω = a(2π/T) = 2 × 2π/2 = 2π m/s.

Teacher's Note: Maximum velocity occurs at the mean position: v_max = aω = 2πa/T.

Exam Note: v_max = 2πa/T.

Question 11. A S.H.M. has amplitude a and time period T. The maximum velocity will be (a) 4a/T (b) 2a/T (c) 2π√(a/T) (d) 2πa/T [MP PMT 1985]

Solution. Answer (d). vmax = aω = a · 2π/T = 2πa/T.

Teacher's Note: Maximum speed at the equilibrium position equals aω.

Exam Note: Quote v_max = aω = 2πa/T.

Question 12. A particle executes S.H.M. with a period of 6 s and amplitude of 3 cm. Its maximum speed in cm/s is (a) π/2 (b) π (c) 2π (d) 3π [AIIMS 1982]

Solution. Answer (b). vmax = aω = a(2π/T) = 3 × 2π/6 = π cm/s.

Teacher's Note: Use v_max = 2πa/T with consistent units.

Exam Note: Keep amplitude in cm to get cm/s.

Question 13. A body of mass 5 gm is executing S.H.M. about a point with amplitude 10 cm. Its maximum velocity is 100 cm/s. Its velocity will be 50 cm/s at a distance (a) 5 (b) 5√2 (c) 5√3 (d) 10√2 [CPMT 1976]

Solution. Answer (c). vmax = aω = 100 cm/s and a = 10 cm, so ω = 10 rad/s. v = ω√(a² − y²) ⇒ 50 = 10√(10² − y²) ⇒ y = 5√3 cm.

Teacher's Note: First find ω from v_max/a, then solve v = ω√(a²−y²); the mass is not needed.

Exam Note: Mass is a distractor; find ω first.

Sample problems based on Energy

Question 14. A particle is executing simple harmonic motion with frequency f. The frequency at which its kinetic energy changes into potential energy is (a) f/2 (b) f (c) 2f (d) 4f

Solution. Answer (c). Kinetic and potential energies vary as cos²ωt and sin²ωt, i.e. with angular frequency 2ω, so they oscillate at frequency 2f (time period T/2).

Teacher's Note: K and U go through two full cycles in one S.H.M. cycle, so their frequency is doubled.

Exam Note: Energy frequency = 2 × displacement frequency.

Question 15. When the potential energy of a particle executing simple harmonic motion is one-fourth of the maximum value during the oscillation, its displacement from the equilibrium position in terms of amplitude a is (a) a/4 (b) a/3 (c) a/2 (d) 2a/3 [CBSE 1993; MP PMT 1994; MP PET 1995, 96; MP PMT 2000]

Solution. Answer (c). Potential energy = (1/4) maximum energy ⇒ ½mω²y² = ¼(½mω²a²) ⇒ y² = a²/4 ⇒ y = a/2.

Teacher's Note: U ∝ y², so a quarter of the maximum U means y is half of a.

Exam Note: U ∝ y²; quarter energy gives half displacement.

Question 16. A particle of mass 10 gram is executing S.H.M. with an amplitude of 0.5 m and circular frequency of 10 rad/s. The maximum value of the force acting on the particle during the oscillation is (a) 25 N (b) 5 N (c) 2.5 N (d) 0.5 N [MP PMT 2000]

Solution. Answer (d). Maximum force = mass × maximum acceleration = mω²a = 10 × 10−3 × (10)² × 0.5 = 0.5 N.

Teacher's Note: Convert grams to kilograms before using F_max = mω²a.

Exam Note: Convert 10 g to 0.01 kg first.

Question 17. A body is moving in a room with a velocity of 20 m/s perpendicular to the two walls separated by 5 m. There is no friction and the collisions with the walls are elastic. The motion of the body is (a) Not periodic (b) Periodic but not simple harmonic (c) Periodic and simple harmonic (d) Periodic with variable time period

Solution. Answer (b). Since there is no friction and the collisions are elastic, no energy is lost and the body strikes the two walls again and again, so the motion is periodic. But there is no restoring force, so the characteristics of S.H.M. are not satisfied.

Teacher's Note: Periodic motion is S.H.M. only if a restoring force proportional to displacement exists.

Exam Note: Periodic does not imply simple harmonic.

Question 18. Two particles execute S.H.M. of the same amplitude and frequency along the same straight line. They pass one another when going in opposite directions. Each time their displacement is half of their amplitude. The phase difference between them is (a) 30° (b) 60° (c) 90° (d) 120°

Solution. Answer (d). Let the motions be y = a sin ωt and y = a sin(ωt + φ). When they meet, a/2 = a sin ωt, so sin ωt = 1/2 and cos ωt = √3/2 (first particle moving upward). For the second, 1/2 = sin ωt cos φ + cos ωt sin φ = (1/2)cos φ + (√3/2) sin φ. So 1 − cos φ = √3 sin φ; squaring, (1 − cos φ)² = 3(1 − cos²φ), giving cos φ = +1 or cos φ = −1/2, i.e. φ = 0 or φ = 120°. Since they move in opposite directions, φ = 120°.

Teacher's Note: Same position and opposite velocities means phases θ and π − θ; with θ = 30° the gap is 120°.

Exam Note: Phases 30° and 150° give 120°.

Question 19. The acceleration of a particle performing S.H.M. is 12 cm/s² at a distance of 3 cm from the mean position. Its time period is (a) 0.5 s (b) 1.0 s (c) 2.0 s (d) 3.14 s

Solution. Answer (d). A = ω²y ⇒ ω = √(A/y) = √(12/3) = 2 rad/s. T = 2π/ω = 2π/2 = π = 3.14 s.

Teacher's Note: Acceleration/displacement gives ω²; then T = 2π/ω.

Exam Note: Find ω² = A/y first.

Question 20. A particle of mass 10 gm is describing S.H.M. along a straight line with period of 2 s and amplitude of 10 cm. Its kinetic energy when it is at 5 cm from its equilibrium position is (a) 37.5π² erg (b) 3.75π² erg (c) 375π² erg (d) 0.375π² erg

Solution. Answer (c). ω = 2π/T = π rad/s. Kinetic energy = ½mω²(a² − y²) = ½ × 10 × π² × (10² − 5²) = 375π² erg.

Teacher's Note: Work in CGS (g, cm) to get ergs; K = ½mω²(a²−y²).

Exam Note: Use CGS units for energy in erg.

Question 21. The total energy of the body executing S.H.M. is E. Then the kinetic energy when the displacement is half of the amplitude is (a) E/2 (b) E/4 (c) 3E/4 (d) √3E/4 [RPET 1996]

Solution. Answer (c). K = ½mω²(a² − y²) with y = a/2 gives ½mω²(3a²/4) = (3/4)(½mω²a²) = 3E/4.

Teacher's Note: Total E = ½mω²a²; at y = a/2, U = E/4, so K = 3E/4.

Exam Note: K = E − U with U = E/4.

Question 22. A body executing simple harmonic motion has a maximum acceleration equal to 24 m/s² and maximum velocity equal to 16 m/s. The amplitude of simple harmonic motion is (a) 32/3 m (b) 3/32 m (c) 1024/9 m (d) 64/9 m [MP PMT 1995]

Solution. Answer (a). Maximum acceleration ω²a = 24 ...(i); maximum velocity aω = 16 ...(ii). Dividing (i) by (ii): ω = 3/2 rad/s. Substituting in (ii): a = 32/3 m.

Teacher's Note: Divide a_max by v_max to get ω, then a = v_max/ω.

Exam Note: a_max/v_max = ω.

Question 23. The displacement of an oscillating particle varies with time (in seconds) according to the equation y (cm) = sin[(π/2)(t/2 + 1/3)]. The maximum acceleration of the particle is approximately (a) 5.21 cm/s² (b) 3.62 cm/s² (c) 1.81 cm/s² (d) 0.62 cm/s²

Solution. Answer (d). Comparing with y = a sin(ωt + φ): a = 1 cm and ω = π/4 rad/s. Maximum acceleration = ω²a = (π/4)² × 1 = (3.14/4)² = 0.62 cm/s².

Teacher's Note: Expand the bracket first: the coefficient of t is π/4, not π/2.

Exam Note: Distribute π/2 over the bracket to find ω.

Question 24. The potential energy of a particle executing S.H.M. at a distance x from the mean position is proportional to (a) √x (b) x (c) x² (d) x³ [Roorkee 1992]

Solution. Answer (c). Potential energy U = ½mω²x², so U ∝ x².

Teacher's Note: Restoring force is linear in x, so the work stored goes as x².

Exam Note: U = ½kx² ∝ x².

Question 25. The kinetic energy and potential energy of a particle executing S.H.M. will be equal when the displacement is (amplitude = a) (a) a/2 (b) a√2 (c) a/√2 (d) a√2/3 [MP PMT 1987; CPMT 1990]

Solution. Answer (c). K = U ⇒ ½mω²(a² − y²) = ½mω²y² ⇒ a² − y² = y² ⇒ y = a/√2.

Teacher's Note: Equal K and U means each is half the total energy, hence y² = a²/2.

Exam Note: Set K = U and solve for y.

Question 26. The phase of a particle executing S.H.M. is π/2 when it has (a) Maximum velocity (b) Maximum acceleration (c) Maximum energy (d) Maximum displacement

Solution. Answer (b, d). Phase π/2 means the extreme position. At the extreme position, acceleration and displacement are maximum.

Teacher's Note: At phase π/2, y = a sin(π/2) = a; velocity is zero and total energy is constant.

Exam Note: Phase π/2 is the extreme position.

Question 27. The displacement of a particle moving in S.H.M. at any instant is given by y = a sin ωt. The acceleration after time t = T/4 is (where T is the time period) (a) aω (b) −aω (c) aω² (d) −aω² [MP PET 1984]

Solution. Answer (d). Acceleration A = −ω²y = −aω² sin ωt. At t = T/4, ωt = π/2, so A = −aω².

Teacher's Note: T/4 is the extreme position, where acceleration has maximum magnitude and points to the mean.

Exam Note: At T/4: y = a, acceleration −ω²a.

Question 28. A particle of mass m is hanging vertically by an ideal spring of force constant k. If the mass is made to oscillate vertically, its total energy is (a) Maximum at extreme position (b) Maximum at mean position (c) Minimum at mean position (d) Same at all positions

Solution. Answer (d). In S.H.M. the total energy (kinetic + potential) remains constant at every position.

Teacher's Note: Kinetic and potential energies exchange, but their sum stays constant without friction.

Exam Note: Total energy is constant in S.H.M.

Sample problems based on Differential equation of S.H.M.

Question 29. A particle moves such that its acceleration a is given by a = −bx, where x is the displacement from the equilibrium position and b is a constant. The period of oscillation is (a) 2π√b (b) 2π/√b (c) 2π/b (d) 2√(π/b) [NCERT 1984; CPMT 1991; MP PMT 1994; MNR 1995]

Solution. Answer (b). Acceleration = −ω² (displacement) and a = −bx. Comparing, ω² = b ⇒ ω = √b. Time period T = 2π/ω = 2π/√b.

Teacher's Note: Match a = −bx with a = −ω²x, so ω² = b.

Exam Note: Match with a = −ω²x.

Question 30. The equation of motion of a particle is d²y/dt² + ky = 0, where k is a positive constant. The time period of the motion is given by (a) 2π/k (b) 2πk (c) 2π/√k (d) 2π√k

Solution. Answer (c). Standard equation m d²y/dt² + ky = 0; in the given equation m = 1 and spring factor = k. So T = 2π√(m/k) = 2π/√k.

Teacher's Note: Compare with d²y/dt² + ω²y = 0: here ω² = k.

Exam Note: Coefficient of y is ω².

Sample problems based on Simple pendulum

Question 31. A clock which keeps correct time at 20°C is subjected to 40°C. If the coefficient of linear expansion of the pendulum is 12 × 10−6 /°C, how much will it gain or lose in time? (a) 10.3 s/day (b) 20.6 s/day (c) 5 s/day (d) 20 min/day [BHU 1998]

Solution. Answer (a). ΔT/T = ½αΔθ = ½ × 12 × 10−6 × (40 − 20) = 12 × 10−5. So ΔT = 12 × 10−5 × 86400 s/day ≈ 10.3 s/day (the pendulum lengthens, so the clock loses time).

Teacher's Note: Heating lengthens the pendulum, so the period rises by αΔθ/2 and the clock runs slow.

Exam Note: Fractional change in T is half that of length.

Question 32. The metallic bob of a simple pendulum has relative density ρ. The time period of this pendulum is T. If the metallic bob is immersed in water, the new time period is given by (a) T(ρ − 1)/ρ (b) Tρ/(ρ − 1) (c) T√((ρ − 1)/ρ) (d) T√(ρ/(ρ − 1)) [SCRA 1998]

Solution. Answer (d). Formula: T′/T = √(ρ/(ρ − σ)). Here σ = 1 for water, so T′ = T√(ρ/(ρ − 1)).

Teacher's Note: Buoyancy reduces effective g to g(1 − σ/ρ), so the period increases.

Exam Note: Effective g falls by factor (ρ−1)/ρ.

Question 33. The period of a simple pendulum is doubled when (a) its length is doubled (b) the mass of the bob is doubled (c) its length is made four times (d) the mass of the bob and the length of the pendulum are doubled [CPMT 1974; MNR 1980; AFMC 1995]

Solution. Answer (c). T = 2π√(l/g), so T ∝ √l; T doubles when l becomes four times. The period does not depend on the mass.

Teacher's Note: T goes as the square root of length and is independent of bob mass.

Exam Note: T ∝ √l, so 4l doubles T.

Question 34. A simple pendulum is executing S.H.M. with a time period T. If the length of the pendulum is increased by 21%, the percentage increase in the time period of the pendulum is (a) 10% (b) 21% (c) 30% (d) 50% [BHU 1994]

Solution. Answer (a). As T ∝ √l, T2/T1 = √(l2/l1) = √1.21 = 1.1, so T2 = 1.1T = T + 10% of T.

Teacher's Note: Take the square root of 1.21 exactly, since 21% is too large for the half-percentage shortcut.

Exam Note: Use √1.21 = 1.1 exactly.

Question 35. The length of a simple pendulum is increased by 1%. Its time period will (a) increase by 1% (b) increase by 0.5% (c) decrease by 0.5% (d) increase by 2% [MP PET 1994]

Solution. Answer (b). T = 2π√(l/g), hence T ∝ √l. Percentage increment in T = ½(percentage increment in l) = 0.5%.

Teacher's Note: For small changes, percentage change in T is half that in l.

Exam Note: Half the percentage change in length.

Question 36. The bob of a simple pendulum of mass m and total energy E will have maximum linear momentum equal to (a) √(2E/m) (b) √(2mE) (c) 2mE (d) mE² [MP PMT 1986]

Solution. Answer (b). At the mean position the whole energy is kinetic: E = P²/(2m), where P is momentum and m is mass. So P = √(2mE).

Teacher's Note: Momentum is maximum where kinetic energy equals total energy, at the mean position.

Exam Note: Use E = p²/2m at the mean position.

Question 37. The mass and diameter of a planet are twice those of the earth. The period of oscillation of a pendulum on this planet will be (if it is a second's pendulum on earth) (a) 1/√2 s (b) 2√2 s (c) 2 s (d) ½ s [IIT 1973]

Solution. Answer (b). g ∝ M/R², so g′ = g/2. T′/T = √(g/g′), with T = 2 s for a second's pendulum, giving T′ = 2√2 s.

Teacher's Note: Doubling diameter doubles R, so g′ = 2/4 · g = g/2; then T scales by √2.

Exam Note: g ∝ M/R²: mass ×2, radius ×2 gives g/2.

Sample problems based on Spring pendulum

Question 38. A spring of force constant k is cut into two pieces such that one piece is double the length of the other. Then the long piece will have a force constant of (a) 2k/3 (b) 3k/2 (c) 3k (d) 6k [IIT-JEE 1999]

Solution. Answer (b). If l1 = nl2, then k1 = (n + 1)k/n = (3/2)k [as n = 2].

Teacher's Note: Spring constant is inversely proportional to length; the long piece (2/3 of l) has 3k/2.

Exam Note: k ∝ 1/length; longer piece, smaller k.

Question 39. Two bodies M and N of equal masses are suspended from two separate massless springs of force constants k1 and k2 respectively. If the two bodies oscillate vertically such that their maximum velocities are equal, the ratio of the amplitude of M to that of N is (a) k1/k2 (b) √(k1/k2) (c) k2/k1 (d) √(k2/k1)

Solution. Answer (d). Maximum velocities are equal: a1ω1 = a2ω2 ⇒ a1√(k1/m) = a2√(k2/m) ⇒ a1/a2 = √(k2/k1).

Teacher's Note: Equal v_max means amplitude is inversely proportional to ω, hence to √k.

Exam Note: Equal v_max: a ∝ 1/ω.

Question 40. Two identical springs of constant k are connected in series and parallel as shown in the figure (series: two springs one below the other with the mass m at the bottom; parallel: two springs side by side with the mass m hanging from both). A mass m is suspended from them. The ratio of their frequencies of vertical oscillation will be (a) 2 : 1 (b) 1 : 1 (c) 1 : 2 (d) 4 : 1

Solution. Answer (c). Series combination: keff = k/2, so n1 ∝ √(k/2). Parallel combination: keff = 2k, so n2 ∝ √(2k). So n1/n2 = √((k/2)/(2k)) = 1/2.

Teacher's Note: Series halves k, parallel doubles it; frequency goes as √k so the ratio is √(1/4).

Exam Note: Series k/2, parallel 2k, ratio √(1/4).

Question 41. A block of mass m attached to a spring of spring constant k oscillates on a smooth horizontal table. The other end of the spring is fixed to a wall. The block has a speed v when the spring is at its natural length. Before coming to an instantaneous rest, if the block moves a distance x from the mean position, then (a) x = √(m/k) (b) x = (1/v)√(m/k) (c) x = v√(m/k) (d) x = √(mv/k)

Solution. Answer (c). Kinetic energy of block (½mv²) = elastic potential energy of spring (½kx²). Solving, x = v√(m/k).

Teacher's Note: At natural length all energy is kinetic; equate it to ½kx² at the turning point.

Exam Note: Equate ½mv² to ½kx².

Question 42. A block is placed on a frictionless horizontal table. The mass of the block is m and springs of force constants k1 and k2 are attached on either side of it. If the block is displaced a little and left to oscillate, then the angular frequency of oscillation will be (a) ((k1 + k2)/m)1/2 (b) (k1k2/(m(k1 + k2)))1/2 (c) (k1k2/((k1 − k2)m))1/2 (d) ((k1² + k2²)/((k1 + k2)m))1/2

Solution. Answer (a). The given arrangement is equivalent to a parallel combination, so keff = k1 + k2 and ω = √(keff/m) = √((k1 + k2)/m).

Teacher's Note: Springs on both sides of the block both push back in the same direction, so stiffnesses add.

Exam Note: Springs on opposite sides act in parallel.

Question 43. A particle of mass 200 gm executes S.H.M. The restoring force is provided by a spring of force constant 80 N/m. The time period of oscillations is (a) 0.31 s (b) 0.15 s (c) 0.05 s (d) 0.02 s

Solution. Answer (a). T = 2π√(m/k) = 2π√(0.2/80) = 2π/20 = 0.31 s.

Teacher's Note: Convert 200 g to 0.2 kg before using T = 2π√(m/k).

Exam Note: Convert grams to kilograms.

Question 44. The length of a spring is l and its force constant is k when a weight W is suspended from it. Its length increases by x. If the spring is cut into two equal parts and put in parallel and the same weight W is suspended from them, then the extension will be (a) 2x (b) x (c) x/2 (d) x/4

Solution. Answer (d). As F = kx, x ∝ 1/k (F constant). If the spring of constant k is divided into two equal parts, each part has force constant 2k. If these two parts are put in parallel, the force constant of the combination becomes 4k. So x2/x1 = k1/k2 = k/4k ⇒ x2 = x/4.

Teacher's Note: Halving doubles k per piece; parallel doubles again, so k becomes 4k and extension a quarter.

Exam Note: Cut in half: 2k each; parallel: 4k.

Question 45. A mass m is suspended from a spring of length l and force constant k. The frequency of vibration of the mass is f1. The spring is cut into two equal parts and the same mass is suspended from one of the parts. The new frequency of vibration of the mass is f2. Which of the following relations between the frequencies is correct? (a) f1 = √2 f2 (b) f1 = f2 (c) f1 = 2f2 (d) f2 = √2 f1 [NCERT 1983; CPMT 1986; MP PMT 1991]

Solution. Answer (d). f ∝ √k. If the spring is divided into two equal parts, the force constant of each part becomes double. f2/f1 = √(k2/k1) = √2 ⇒ f2 = √2 f1.

Teacher's Note: A half-length spring is twice as stiff, so frequency rises by √2 for the same mass.

Exam Note: f ∝ √k; half spring has 2k.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Download Pradeep's KL Gogia Solutions for Class 11

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 15 Simple Harmonic Motion tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Physics?

They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.