Pradeep's KL Gogia Solutions for Class 11 Physics: Chapter 14 Rotational Motion
Review structured textbook solutions for Class 11 Physics Chapter 14 Rotational Motion prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 11 Physics Solutions: Chapter 14 Rotational Motion
View or download the dedicated Chapter 14 Rotational Motion solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Rotational Motion - Pages 1-20
Sample problems based on centre of mass
Question 1. The distance between the carbon atom and the oxygen atom in a carbon monoxide molecule is 1.1 Å. Given, mass of carbon atom is 12 a.m.u. and mass of oxygen atom is 16 a.m.u., calculate the position of the centre of mass of the carbon monoxide molecule. Options: (a) 6.3 Å from the carbon atom (b) 1 Å from the oxygen atom (c) 0.63 Å from the carbon atom (d) 0.12 Å from the oxygen atom.
Solution. Correct option: (c). Let the carbon atom be at the origin and the oxygen atom on the x-axis. m1 = 12, m2 = 16, r1 = 0, r2 = 1.1 î. Then r = (m1r1 + m2r2)/(m1 + m2) = (16 × 1.1 î)/28 = 0.63 î, i.e. 0.63 Å from the carbon atom.
Teacher's Note: Place one atom at the origin; the centre of mass lies nearer the heavier atom (oxygen), as the arithmetic shows.
Exam Note: Write the formula, substitute, state distance from the named atom.
Question 2. The velocities of three particles of masses 20 g, 30 g and 50 g are 10î, 10ĵ and 10k̂ respectively. The velocity of the centre of mass of the three particles is [EAMCET 2001] Options: (a) 2î + 3ĵ + 5k̂ (b) 10(î + ĵ + k̂) (c) 20î + 30ĵ + 5k̂ (d) 2î + 30ĵ + 50k̂.
Solution. Correct option: (a). Velocity of centre of mass vcm = (m1v1 + m2v2 + m3v3)/(m1 + m2 + m3) = (20 × 10î + 30 × 10ĵ + 50 × 10k̂)/100 = 2î + 3ĵ + 5k̂.
Teacher's Note: Mass-weighted average of velocities, component by component; total mass is 100 g.
Exam Note: Divide by total mass; keep vector components separate.
Question 3. Masses 8, 2, 4, 2 kg are placed at the corners A, B, C, D respectively of a square ABCD of diagonal 80 cm. The distance of centre of mass from A will be Options: (a) 20 cm (b) 30 cm (c) 40 cm (d) 60 cm.
Solution. Correct option: (b). Take corner A (mass 8 kg) as origin. The diagonal d = a√2 = 80 cm ⇒ a = 40√2 cm. m1 = 8, m2 = 2, m3 = 4, m4 = 2 kg at r1 = 0, r2 = a î, r3 = a î + a ĵ, r4 = a ĵ. Then r = Σm r/Σm = (2a + 4a)î/16 + (4a + 2a)ĵ/16 = 15√2 î + 15√2 ĵ cm. Centre of mass = (15√2, 15√2); corner A = (0, 0). Distance = √((15√2)2 + (15√2)2) = √900 = 30 cm.
Teacher's Note: Choose A as origin and apply the centre-of-mass formula; then use the distance formula.
Exam Note: Show coordinates of each mass, then distance; units in cm.
Question 4. The coordinates of the positions of particles of mass 7, 4 and 10 gm are (1, 5, −3), (2, 5, 7) and (3, 3, −1) cm respectively. The position of the centre of mass of the system would be Options: (a) (−15/7, −85/21, 1/7) cm (b) (15/7, −85/21, 1/7) cm (c) (15/7, 85/21, −1/7) cm (d) (15/7, 85/21, 1/3) cm.
Solution. Correct option: (c). m1 = 7, m2 = 4, m3 = 10 gm; r1 = (î + 5ĵ − 3k̂), r2 = (2î + 5ĵ + 7k̂), r3 = (3î + 3ĵ − k̂). Position vector of centre of mass r = [7(î + 5ĵ − 3k̂) + 4(2î + 5ĵ + 7k̂) + 10(3î + 3ĵ − k̂)]/(7 + 4 + 10) = (45î + 85ĵ − 3k̂)/21 = (15/7)î + (85/21)ĵ − (1/7)k̂. So the coordinates of the centre of mass are (15/7, 85/21, −1/7).
Teacher's Note: Compute each coordinate as a mass-weighted average; watch the sign of the z-coordinate.
Exam Note: Do x, y, z separately; check signs.
Sample problems based on angular displacement, velocity and acceleration
Question 5. The angular velocity of seconds hand of a watch will be Options: (a) π/60 rad/s (b) π/30 rad/s (c) 60π rad/s (d) 30π rad/s.
Solution. Correct option: (b). The second's hand completes one revolution (2π) in 60 s, so ω = θ/t = 2π/60 = π/30 rad/s.
Teacher's Note: One full turn is 2π radians; the seconds hand takes 60 s.
Exam Note: Use ω = 2π/T with T = 60 s.
Question 6. The wheel of a car is rotating at the rate of 1200 revolutions per minute. On pressing the accelerator for 10 sec it starts rotating at 4500 revolutions per minute. The angular acceleration of the wheel is [MP PET 2001] Options: (a) 30 radians/sec2 (b) 1880 degrees/sec2 (c) 40 radians/sec2 (d) 1980 degrees/sec2.
Solution. Correct option: (d). Angular acceleration α = rate of change of angular speed = 2π(n2 − n1)/t = 2π(4500 − 1200)/(60 × 10) = 2π × 3300/600 rad/s2. In degrees: (3300/600) × 360 = 1980 degrees/sec2.
Teacher's Note: Convert rev/min to rev/s by dividing by 60; the answer is in degrees/s², not rad/s².
Exam Note: Check the unit requested in the options.
Question 7. Angular displacement (θ) of a flywheel varies with time as θ = at + bt2 + ct3, then angular acceleration is given by Options: (a) a + 2bt − 3ct2 (b) 2b − 6t (c) a + 2b − 6t (d) 2b + 6ct.
Solution. Correct option: (d). Angular acceleration α = d2θ/dt2 = d2/dt2(at + bt2 + ct3) = 2b + 6ct.
Teacher's Note: Differentiate θ twice with respect to time.
Exam Note: Differentiate twice; the constant term a vanishes.
Question 8. A wheel completes 2000 rotations in covering a distance of 9.5 km. The diameter of the wheel is Options: (a) 1.5 m (b) 1.5 cm (c) 7.5 m (d) 7.5 cm.
Solution. Correct option: (a). Distance covered in 1 rotation = 2πr = πD (D = 2r = diameter of the wheel). Distance covered in 2000 rotations = 2000 πD = 9.5 × 103 m (given). ∴ D = 1.5 metre.
Teacher's Note: One rotation covers the circumference πD; divide total distance by 2000π.
Exam Note: Convert km to m first.
Question 9. A wheel is at rest. Its angular velocity increases uniformly and becomes 60 rad/sec after 5 sec. The total angular displacement is Options: (a) 600 rad (b) 75 rad (c) 300 rad (d) 150 rad.
Solution. Correct option: (d). Angular acceleration α = (ω2 − ω1)/t = (60 − 0)/5 = 12 rad/sec2. Now from θ = ω1t + ½αt2 = 0 + ½(12)(5)2 = 150 rad.
Teacher's Note: Find α first, then apply the rotational equation of motion from rest.
Exam Note: State α, then substitute in θ = ½αt².
Question 10. A wheel initially at rest, is rotated with a uniform angular acceleration. The wheel rotates through an angle θ1 in first one second and through an additional angle θ2 in the next one second. The ratio θ2/θ1 is Options: (a) 4 (b) 2 (c) 3 (d) 1.
Solution. Correct option: (c). Angular displacement in the first one second θ1 = ½α(1)2 = α/2 …(i) [from θ = ω0t + ½αt2]. Considering the motion from rest again, total angular displacement in two seconds θ1 + θ2 = ½α(2)2 = 2α …(ii). Solving (i) and (ii): θ1 = α/2 and θ2 = 3α/2, ∴ θ2/θ1 = 3.
Teacher's Note: From rest, displacements in successive equal intervals are in the ratio 1 : 3 : 5.
Exam Note: Compute θ in 1 s and 2 s; subtract.
Question 11. As a part of a maintenance inspection the compressor of a jet engine is made to spin according to the graph shown. The number of revolutions made by the compressor during the test is Options: (a) 9000 (b) 16570 (c) 12750 (d) 11250. (Graph: speed in rev per min, rising from 0 to 3000 rev/min, kept constant for a while, then falling back to zero at t = 5 min; the figure is described here in words and is not redrawn.)
Solution. Correct option: (d). Number of revolutions = area between the graph and the time axis = area of the trapezium = ½ × (2.5 + 5) × 3000 = 11250 revolutions.
Teacher's Note: Area under a speed-time graph gives total revolutions; the shape is a trapezium (parallel sides 2.5 and 5 min).
Exam Note: Use trapezium area; units rev/min × min = rev.
Question 12. Figure shows a small wheel fixed coaxially on a bigger one of double the radius. The system rotates about the common axis. The strings supporting A and B do not slip on the wheels. If x and y be the distances travelled by A and B in the same time interval, then Options: (a) x = 2y (b) x = y (c) y = 2x (d) None of these. (Figure: mass A hangs from the small wheel, mass B from the big wheel of double radius.)
Solution. Correct option: (c). Linear displacement (s) = radius (r) × angular displacement (θ), so s ∝ r (θ constant). Distance travelled by A (x)/distance travelled by B (y) = radius of pulley for A (r)/radius of pulley for B (2r) = 1/2 ⇒ y = 2x.
Teacher's Note: Both wheels turn through the same angle, so string length unwound is proportional to radius.
Exam Note: Same θ for coaxial wheels; s = rθ.
Question 13. If the position vector of a particle is r = (3î + 4ĵ) metre and its angular velocity is ω = (ĵ + 2k̂) rad/sec then its linear velocity is (in m/s) Options: (a) (8î − 6ĵ + 3k̂) (b) (3î + 6ĵ + 8k̂) (c) −(3î + 6ĵ + 6k̂) (d) (6î + 8ĵ + 3k̂).
Solution. The book gives option (a), computing the determinant with rows (3, 4, 0) and (0, 1, 2): 8î − 6ĵ + 3k̂. Corrected: this determinant is r × ω, but the linear velocity is v = ω × r. With ω = (0, 1, 2) and r = (3, 4, 0): v = ω × r = (1·0 − 2·4)î − (0·0 − 2·3)ĵ + (0·4 − 1·3)k̂ = −8î + 6ĵ − 3k̂ m/s. This is the negative of option (a), and none of the printed options equals it; option (a) is the book's intended key (it has the right magnitude, wrong sign).
Teacher's Note: v = ω × r, not r × ω; swapping the order reverses the sign.
Exam Note: Order of cross product decides the sign.
Sample problem based on moment of inertia
Question 14. Five particles of mass = 2 kg are attached to the rim of a circular disc of radius 0.1 m and negligible mass. Moment of inertia of the system about the axis passing through the centre of the disc and perpendicular to its plane is Options: (a) 1 kg m2 (b) 0.1 kg m2 (c) 2 kg m2 (d) 0.2 kg m2.
Solution. Correct option: (b). We do not consider the moment of inertia of the disc because it does not have any mass, so the moment of inertia of the system is that of the five particles: I = 5 mr2 = 5 × 2 × (0.1)2 = 0.1 kg-m2.
Teacher's Note: Massless disc contributes nothing; add m r² for each particle on the rim.
Exam Note: I = Σmr²; ignore massless frame.
Question 15. A circular disc X of radius R is made from an iron plate of thickness t, and another disc Y of radius 4R is made from an iron plate of thickness t/4. Then the relation between the moment of inertia IX and IY is [AIEEE 2003] Options: (a) IY = 64 IX (b) IY = 32 IX (c) IY = 16 IX (d) IY = IX.
Solution. Correct option: (a). Moment of inertia of a disc I = ½MR2 = ½(πR2tρ)R2 = ½πρtR4 [as M = V × ρ = πR2tρ, t = thickness, ρ = density]. ∴ IY/IX = (tY/tX)(RY/RX)4 [ρ constant] = (1/4)(4)4 = 64 [given RY = 4RX, tY = t/4]. ⇒ IY = 64 IX.
Teacher's Note: Same material: I is proportional to thickness times R⁴.
Exam Note: Express M through density and thickness first.
Question 16. Moment of inertia of a uniform circular disc about a diameter is I. Its moment of inertia about an axis perpendicular to its plane and passing through a point on its rim will be [UPSEAT 2002] Options: (a) 5I (b) 6I (c) 3I (d) 4I.
Solution. Correct option: (b). Moment of inertia of disc about a diameter = ¼MR2 = I (given) ∴ MR2 = 4I. Now moment of inertia of disc about an axis perpendicular to its plane and passing through a point on its rim = (3/2)MR2 = (3/2)(4I) = 6I.
Teacher's Note: Use ¼MR² for diameter, then ½MR² + MR² = 3/2 MR² for a rim axis (parallel axis theorem).
Exam Note: Apply parallel axis theorem; link MR² to I.
Question 17. Four thin rods of same mass M and same length l, form a square as shown in figure. Moment of inertia of this system about an axis through centre O and perpendicular to its plane is Options: (a) 4Ml2/3 (b) Ml2/3 (c) Ml2/6 (d) 2Ml2/3. (Figure: square ABCD of side l, centre O.)
Solution. Correct option: (a). Moment of inertia of rod AB about point P (its midpoint) = Ml2/12. M.I. of rod AB about point O = Ml2/12 + M(l/2)2 = Ml2/3 [by the theorem of parallel axis]. The system consists of 4 rods of similar type, so by symmetry Isystem = 4Ml2/3.
Teacher's Note: Parallel axis from rod midpoint to O is l/2; four identical rods multiply by 4.
Exam Note: Rod about centre plus Md²; multiply by four.
Question 18. Three rings each of mass M and radius R are arranged as shown in the figure. The moment of the system about YY′ will be Options: (a) 3MR2 (b) (3/2)MR2 (c) 5MR2 (d) (7/2)MR2. (Figure: three rings touching each other, ring 1 on top with YY′ passing through its diameter and touching rings 2 and 3 as tangents.)
Solution. Correct option: (d). M.I. of system about YY′: I = I1 + I2 + I3, where I1 = moment of inertia of ring about a diameter, I2 = I3 = M.I. of ring about a tangent in its plane. ∴ I = ½MR2 + (3/2)MR2 + (3/2)MR2 = (7/2)MR2.
Teacher's Note: Ring about diameter is ½MR²; about a tangent in its plane it is 3/2 MR².
Exam Note: Identify diameter versus tangent axis for each ring.
Question 19. Let I be the moment of inertia of a uniform square plate about an axis AB that passes through its centre and is parallel to two of its sides. CD is a line in the plane of the plate that passes through the centre of the plate and makes an angle θ with AB. The moment of inertia of the plate about the axis CD is then equal to [IIT-JEE 1998] Options: (a) I (b) I sin2θ (c) I cos2θ (d) I cos2(θ/2).
Solution. Correct option: (a). Let IZ be the moment of inertia of the square plate about the axis through the centre perpendicular to the plane. By the theorem of perpendicular axes, IZ = IAB + IA′B′ = ICD + IC′D′, so IZ = 2IAB = 2ICD [as AB, A′B′ and CD, C′D′ are symmetric axes]. Hence ICD = IAB = I.
Teacher's Note: For a square, every in-plane axis through the centre has the same moment of inertia.
Exam Note: Perpendicular axes theorem plus symmetry.
Question 20. Three rods each of length L and mass M are placed along X, Y and Z-axes in such a way that one end of each of the rod is at the origin. The moment of inertia of this system about Z axis is Options: (a) 2ML2/3 (b) 4ML2/3 (c) 5ML2/3 (d) ML2/3.
Solution. Correct option: (a). Moment of inertia of the system about the z-axis is found by calculating the moment of inertia of individual rods about the z-axis. I1 = I2 = ML2/3 because the z-axis is the edge of rods 1 and 2 (axis perpendicular to the rod through its end), and I3 = 0 because rod 3 is lying on the z-axis. ∴ Isystem = ML2/3 + ML2/3 + 0 = 2ML2/3.
Teacher's Note: Rod along the axis contributes zero; the other two use ML²/3 about an end.
Exam Note: Add contributions rod by rod; one is zero.
Question 21. Three point masses each of mass m are placed at the corners of an equilateral triangle of side a. Then the moment of inertia of this system about an axis passing along one side of the triangle is [AIIMS 1995] Options: (a) ma2 (b) 3ma2 (c) (3/4)ma2 (d) (2/3)ma2.
Solution. Correct option: (c). Moment of inertia of the system about side AB: I = IA + IB + IC = 0 + 0 + mx2 = m(a√3/2)2 = (3/4)ma2, where x is the height of the triangle.
Teacher's Note: Masses on the axis contribute zero; only the apex mass at the triangle's height counts.
Exam Note: Height of equilateral triangle is a√3/2.
Question 22. Two identical rods each of mass M and length l are joined in crossed position as shown in figure. The moment of inertia of this system about a bisector would be Options: (a) Ml2/6 (b) Ml2/12 (c) Ml2/3 (d) Ml2/4. (Figure: two rods crossing at their centres at right angles; B1B2 is a bisector in the plane.)
Solution. Correct option: (b). Moment of inertia of the system about the axis perpendicular to the plane of the rods and passing through their common centre: Iz = Ml2/12 + Ml2/12 = Ml2/6. Again from the perpendicular axes theorem, Iz = IB1 + IB2 = 2IB1 = Ml2/6 [as IB1 = IB2]. ∴ IB1 = IB2 = Ml2/12.
Teacher's Note: Find I about the perpendicular axis first, then halve it using perpendicular axes and symmetry.
Exam Note: Use perpendicular-axes theorem with symmetry.
Question 23. The moment of inertia of a rod of length l about an axis passing through its centre of mass and perpendicular to rod is I. The moment of inertia of hexagonal shape formed by six such rods, about an axis passing through its centre of mass and perpendicular to its plane will be Options: (a) 16I (b) 40I (c) 60I (d) 80I.
Solution. Correct option: (c). Moment of inertia of rod AB about its centre and perpendicular to the length = ml2/12 = I, ∴ ml2 = 12I. Moment of inertia of the rod about the axis passing through O perpendicular to the plane of the hexagon: Irod = ml2/12 + mx2 = ml2/12 + m(√3 l/2)2 = 5ml2/6 [theorem of parallel axes]. Now moment of inertia of system Isystem = 6 × Irod = 6 × 5ml2/6 = 5ml2 = 5(12I) = 60I.
Teacher's Note: Each rod's centre is √3 l/2 from the hexagon centre; apply parallel axis, multiply by six.
Exam Note: Distance of rod centre is apothem √3l/2.
Question 24. The moment of inertia of HCl molecule about an axis passing through its centre of mass and perpendicular to the line joining the H+ and Cl− ions will be, if the interatomic distance is 1 Å Options: (a) 0.61 × 10−47 kg·m2 (b) 1.61 × 10−47 kg·m2 (c) 0.061 × 10−47 kg·m2 (d) 0.
Solution. Correct option: (b). If r1 and r2 are the respective distances of particles m1 and m2 from the centre of mass then m1r1 = m2r2 ⇒ 1 × x = 35.5 × (L − x) ⇒ x = 35.5(1 − x) ⇒ x = 0.973 Å and L − x = 0.027 Å. Moment of inertia of the system about the centre of mass I = m1x2 + m2(L − x)2 = 1 amu × (0.973 Å)2 + 35.5 amu × (0.027 Å)2. Substituting 1 a.m.u. = 1.67 × 10−27 kg and 1 Å = 10−10 m, I = 1.62 × 10−47 kg·m2 (nearest option: 1.61 × 10−47).
Teacher's Note: Locate the centre of mass first: it lies very near Cl; then sum m r² for both ions.
Exam Note: Find CM position, then I = Σmr²; convert units.
Question 25. Four masses are joined to a light circular frame as shown in the figure. The radius of gyration of this system about an axis passing through the centre of the circular frame and perpendicular to its plane would be Options: (a) a/√2 (b) a/2 (c) a (d) 2a. (Figure: masses 2m, 3m, 2m and m on the frame of radius a.)
Solution. Correct option: (c). Since the circular frame is massless we consider the moment of inertia of the four masses only: I = ma2 + 2ma2 + 3ma2 + 2ma2 = 8ma2 …(i). From the definition of radius of gyration I = 8mk2 …(ii). Comparing (i) and (ii), radius of gyration k = a.
Teacher's Note: Total mass 8m at distance a gives I = 8ma², so k equals a.
Exam Note: Equate I = (total mass) k².
Question 26. Four spheres, each of mass M and radius r are situated at the four corners of a square of side R. The moment of inertia of the system about an axis perpendicular to the plane of square and passing through its centre will be Options: (a) (5/2)M(4r2 + 5R2) (b) (2/5)M(4r2 + 5R2) (c) (2/5)M(4r2 + 5r2) (d) (5/2)M(4r2 + 5r2).
Solution. Correct option: (b). M.I. of sphere A about its diameter IO′ = (2/5)Mr2. M.I. of sphere A about an axis perpendicular to the plane of the square and passing through its centre, by the parallel axis theorem: IO = IO′ + M(R/√2)2 = (2/5)Mr2 + MR2/2. Moment of inertia of the system (four spheres) = 4[(2/5)Mr2 + MR2/2] = (2/5)M[4r2 + 5R2].
Teacher's Note: Each sphere is R/√2 from the centre; parallel axis theorem with I = 2/5 Mr² for each.
Exam Note: Sphere about diameter plus Md²; times four.
Question 27. The moment of inertia of a solid sphere of density ρ and radius R about its diameter is Options: (a) (105/176)R5ρ (b) (105/176)R2ρ (c) (176/105)R5ρ (d) (176/105)R2ρ.
Solution. Correct option: (c). Moment of inertia of sphere about its diameter I = (2/5)MR2 = (2/5)(4/3 πR3ρ)R2 [as M = Vρ = (4/3)πR3ρ]. I = (8π/15)R5ρ = (8 × 22)/(15 × 7) R5ρ = (176/105)R5ρ.
Teacher's Note: Replace M by density times volume, then use 2/5 MR² with π = 22/7.
Exam Note: Substitute M = (4/3)πR³ρ; use π = 22/7.
Question 28. Two circular discs A and B are of equal masses and thickness but made of metals with densities dA and dB (dA > dB). If their moments of inertia about an axis passing through centres and normal to the circular faces be IA and IB, then Options: (a) IA = IB (b) IA > IB (c) IA < IB (d) IA ≥ or ≤ IB (undecided).
Solution. Correct option: (c). Moment of inertia of a circular disc about an axis passing through its centre and normal to its circular face: I = ½MR2 = ½M(M/πtρ) [as M = Vρ = πR2tρ ∴ R2 = M/πtρ] ⇒ I = M2/(2πtρ), or I ∝ 1/ρ if mass and thickness are constant. So in the problem IA/IB = dB/dA, ∴ IA < IB [as dA > dB].
Teacher's Note: Equal mass and thickness: denser disc has smaller radius, hence smaller I.
Exam Note: Express R² through density; I ∝ 1/ρ.
Free study material for Physics
Class 11 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Physics Chapter 14 Rotational Motion Part 1
Complete Math Solutions for Pradeep's KL Gogia Solutions Physics Chapter 14 Rotational Motion Part 1
Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Physics Chapter 14 Rotational Motion Part 1 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with Pradeep's KL Gogia Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for Class 11 Math
In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.