Pradeep's KL Gogia Solutions Physics Chapter 10 Motion In Two Dimension Part 2

Download Class 11 Physics Pradeep's KL Gogia Textbook Solutions: Chapter 10 Motion In Two Dimension

Access comprehensive textbook solutions for Chapter 10 Motion In Two Dimension using the Pradeep's KL Gogia reference material for Class 11 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Access Pradeep's KL Gogia Textbook Answers and Solutions

View or download the dedicated Chapter 10 Motion In Two Dimension solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Motion In Two Dimension - Problems 96 to 187

Sample problems based on circular motion (time period)

Question 96. Two particles of mass M and m are moving in a circle of radii R and r. If their time-periods are same, what will be the ratio of their linear velocities? [CBSE PMT 2001] (a) MR : mr (b) M : m (c) R : r (d) 1 : 1

Solution. (c). v1/v2 = r1ω1/r2ω2. Time periods are equal, i.e. ω1 = ω2, so v1/v2 = r1/r2 = R/r.

Teacher's Note: Same period means same ω, so v = rω depends only on radius; mass is irrelevant.

Exam Note: State v = rω and cancel ω; ignore mass.

Sample problems based on angular acceleration

Question 97. A body is revolving with a uniform speed v in a circle of radius r. The angular acceleration of the body is (a) v/r (b) Zero (c) v2/r along the radius and towards the centre (d) v2/r along the radius and away from the centre

Solution. (b). In uniform circular motion ω is constant, so α = dω/dt = 0.

Teacher's Note: Angular acceleration is zero; v2/r is centripetal (linear) acceleration, not angular.

Exam Note: Write α = dω/dt = 0 for constant ω.

Question 98. The linear acceleration of a car is 10 m/s2. If the wheels of the car have a diameter of 1 m, the angular acceleration of the wheels will be (a) 10 rad/sec2 (b) 20 rad/sec2 (c) 1 rad/sec2 (d) 2 rad/sec2

Solution. (b). Angular acceleration = linear acceleration / radius = 10/0.5 = 20 rad/s2.

Teacher's Note: Use a = αr with radius 0.5 m, not the diameter 1 m.

Exam Note: Halve the diameter first; using 1 m gives wrong option (a).

Question 99. The angular speed of a motor increases from 600 rpm to 1200 rpm in 10 s. What is the angular acceleration of the motor? (a) 600 rad sec-2 (b) 60π rad sec-2 (c) 60 rad sec-2 (d) 2π rad sec-2

Solution. (d). α = (ω2 - ω1)/t = 2π(n2 - n1)/t = 2π(1200 - 600)/(10 × 60) = 2π rad/s2.

Teacher's Note: Convert rpm to rev/s (divide by 60) before using ω = 2πn.

Exam Note: Always convert rpm to rad/s; the factor 60 is the usual slip.

3.10 Centripetal Acceleration

Question 100. If a cycle wheel of radius 4 m completes one revolution in two seconds, then acceleration of the cycle will be (a) π2 m/s2 (b) 2π2 m/s2 (c) 4π2 m/s2 (d) 8π m/s2 [Pb. PMT 2001]

Solution. (c). Given r = 4 m and T = 2 s. ac = (4π2/T2)r = (4π2/(2)2) × 4 = 4π2 m/s2.

Teacher's Note: Use a = 4π2r/T2 directly when period is given.

Exam Note: Pick the formula with T; show substitution for full marks.

Question 101. A stone is tied to one end of a spring 50 cm long and is whirled in a horizontal circle with a constant speed. If the stone makes 10 revolutions in 20 s, what is the magnitude of acceleration of the stone? [Pb. PMT 2000] (a) 493 cm/sec2 (b) 720 cm/sec2 (c) 860 cm/sec2 (d) 990 cm/sec2

Solution. (a). Time period = total time / number of revolutions = 20/10 = 2 s. ac = (4π2/T2)·r = (4π2/(2)2) × (1/2) m/s2 = 4.93 m/s2 = 493 cm/s2.

Teacher's Note: Period is time per revolution (2 s), not 20 s; convert 50 cm to 0.5 m.

Exam Note: Convert m/s2 to cm/s2 as options are in cm.

Question 102. A particle moves with a constant speed v along a circular path of radius r and completes the circle in time T. What is the acceleration of the particle? [Orissa JEE 2002] (a) mg (b) 2πv/T (c) πr2/T (d) πv2/T

Solution. (b). ac = v2/r = ω2r = vω = v(2π/T) = 2πv/T.

Teacher's Note: Replace ω by 2π/T in a = vω to eliminate r.

Exam Note: Show a = vω then ω = 2π/T.

Question 103. If the speed of revolution of a particle on the circumference of a circle and the speed gained in falling through a distance equal to half the radius are equal, then the centripetal acceleration will be (a) g/2 (b) g/4 (c) g/3 (d) g

Solution. (d). Speed gained by a body falling through a distance h is v = √(2gh) = √(2g·r/2) [as h = r/2 given]. So v = √(gr), hence v2/r = g.

Teacher's Note: Equate v from free fall (v2 = 2gh) with circular speed, h = r/2.

Exam Note: Use v2 = 2gh then a = v2/r.

Question 104. Two cars going round a curve with speeds, one at 90 km/h and other at 15 km/h. Each car experiences same acceleration. The radii of curves are in the ratio of [EAMCET (Med.) 1998] (a) 4 : 1 (b) 2 : 1 (c) 16 : 1 (d) 36 : 1

Solution. (d). Centripetal acceleration v12/r1 = v22/r2 (given). So r1/r2 = (v1/v2)2 = (90/15)2 = 36/1.

Teacher's Note: Equal acceleration gives r proportional to v2; the ratio is squared.

Exam Note: Do not forget to square the speed ratio 6.

Question 105. A wheel of radius 0.20 m is accelerated from rest with an angular acceleration of 1 rad/s2. After a rotation of 90° the radial acceleration of a particle on its rim will be (a) π m/s2 (b) 0.5π m/s2 (c) 2.0π m/s2 (d) 0.2π m/s2

Solution. (d). From the equation of motion, angular speed acquired by the wheel: ω22 = ω12 + 2αθ = 0 + 2 × 1 × π/2, so ω22 = π. Radial acceleration = ω2r = π × 0.2 = 0.2π m/s2.

Teacher's Note: Convert 90° to π/2 rad, find ω2 from ω2 = 2αθ, then multiply by r.

Exam Note: Angles must be in radians in rotational kinematics.

3.12 Centrifugal Force - Sample problems based on centripetal and centrifugal force

Question 106. A ball of mass 0.1 kg is whirled in a horizontal circle of radius 1 m by means of a string at an initial speed of 10 r.p.m. Keeping the radius constant, the tension in the string is reduced to one quarter of its initial value. The new speed is (a) 5 r.p.m. (b) 10 r.p.m. (c) 20 r.p.m. (d) 14 r.p.m.

Solution. (a). Tension in the string T = mω2r = m4π2n2r. So T ∝ n2 or n ∝ √T [as m and r are constant]. Therefore n2/n1 = √(T2/T1) = √((T/4)/T) = 1/2, so n2 = n1/2 = 10/2 = 5 rpm.

Teacher's Note: T is proportional to n2, so quartering T halves the speed.

Exam Note: Use ratio method; no need to convert rpm.

Question 107. A cylindrical vessel partially filled with water is rotated about its vertical central axis. Its surface will [RPET 2000] (a) Rise equally (b) Rise from the sides (c) Rise from the middle (d) Lowered equally

Solution. (b). Due to the centrifugal force.

Teacher's Note: In the rotating frame, water is pushed outward, so the surface climbs at the walls.

Exam Note: Name centrifugal effect as the reason.

Question 108. A proton of mass 1.6 × 10-27 kg goes round in a circular orbit of radius 0.10 m under a centripetal force of 4 × 10-13 N. Then the frequency of revolution of the proton is about [Kerala PMT 2002] (a) 0.08 × 108 cycles per sec (b) 4 × 108 cycles per sec (c) 8 × 108 cycles per sec (d) 12 × 108 cycles per sec

Solution. (a). F = 4 × 10-13 N; m = 1.6 × 10-27 kg; r = 0.1 m. Centripetal force F = m4π2n2r, so n = √(F/(4mπ2r)) = 8 × 106 cycles/sec = 0.08 × 108 cycles/sec.

Teacher's Note: Use F = 4π2mn2r and take the square root carefully with powers of ten.

Exam Note: Check powers of ten; 8 × 106 equals option (a).

Question 109. Three identical particles are joined together by a thread as shown in figure. All the three particles are moving in a horizontal plane. If the velocity of the outermost particle is v0, then the ratio of tensions in the three sections of the string is (a) 3 : 5 : 7 (b) 3 : 4 : 5 (c) 7 : 11 : 6 (d) 3 : 5 : 6. (Figure: particles O, A, B, C in a line, with OA = AB = BC = l; the thread rotates about O.)

Solution. (d). Let the angular speed of the thread be ω. For particle C: T3 = mω2·3l. For particle B: T2 - T3 = mω2·2l, so T2 = mω2·5l. For particle A: T1 - T2 = mω2·l, so T1 = mω2·6l. Therefore T3 : T2 : T1 = 3 : 5 : 6. (The printed solution labels the third particle 'C' again; it is particle A.)

Teacher's Note: Each section's tension supplies the net inward force for all particles beyond it.

Exam Note: Apply F = mω2r from the outermost particle inward.

Question 110. A stone of mass 1 kg tied to the end of a string of length 1 m, is whirled in a horizontal circle with a uniform angular velocity of 2 rad/s. The tension of the string is (in N) [KCET 1998] (a) 2 (b) 1/3 (c) 4 (d) 1/4

Solution. (c). T = mω2r = 1 × (2)2 × (1) = 4 Newton.

Teacher's Note: Tension supplies centripetal force mω2r; ω is squared.

Exam Note: Square ω before multiplying.

Question 111. A cord can bear a maximum force of 100 N without breaking. A body of mass 1 kg tied to one end of a cord of length 1 m is revolved in a horizontal plane. What is the maximum linear speed of the body so that the cord does not break? (a) 10 m/s (b) 20 m/s (c) 25 m/s (d) 30 m/s

Solution. (a). Tension in the cord appears due to centrifugal force T = mv2/r, and for the critical condition this tension will be equal to the breaking force (100 N). So mvmax2/r = 100, vmax2 = 100 × 1/1, vmax = 10 m/s.

Teacher's Note: Maximum speed occurs when centripetal requirement equals breaking tension.

Exam Note: Set mv2/r equal to 100 N.

Question 112. A mass is supported on a frictionless horizontal surface. It is attached to a string and rotates about a fixed centre at an angular velocity ω0. If the length of the string and angular velocity are doubled, the tension in the string which was initially T0 is now [AIIMS 1985] (a) T0 (b) T0/2 (c) 4T0 (d) 8T0

Solution. (d). T = mω2l, so T2/T1 = (ω2/ω1)2(l2/l1), i.e. T2/T0 = (2ω/ω)2(2l/l), so T2 = 8T0.

Teacher's Note: T goes as ω2l: doubling both gives 4 × 2 = 8.

Exam Note: Square the ω factor, not the length factor.

Question 113. A stone is rotated steadily in a horizontal circle with a period T by a string of length l. If the tension in the string is kept constant and l increases by 1%, what is the percentage change in T? (a) 1% (b) 0.5% (c) 2% (d) 0.25%

Solution. (b). Tension = m4π2l/T2, so l ∝ T2 or T ∝ √l [tension and mass are constant]. Percentage change in time period = (1/2)(percentage change in length) [if % change is very small] = (1/2)(1%) = 0.5%.

Teacher's Note: T is proportional to √l, so small percentage change in T is half that of l.

Exam Note: Use the half-power rule for small percentage changes.

Question 114. If mass, speed and radius of rotation of a body moving in a circular path are all increased by 50%, the necessary force required to maintain the body moving in the circular path will have to be increased by (a) 225% (b) 125% (c) 150% (d) 100%

Solution. (b). Centripetal force F = mv2/r. If m, v and r are increased by 50%, the new force F' = (m + m/2)(v + v/2)2/(r + r/2) = (9/4)(mv2/r) = (9/4)F. Percentage increase in force = (ΔF/F) × 100 = ((F' - F)/F) × 100 = 500/4 % = 125%.

Teacher's Note: New force is 9/4 of old, an increase of 5/4, not 9/4.

Exam Note: Give increase (125%), not the new value (225%).

Question 115. Two masses m and M are connected by a light string that passes through a smooth hole O at the centre of a table. Mass m lies on the table and M hangs vertically. m is moved round in a horizontal circle with O as the centre. If l is the length of the string from O to m then the frequency with which m should revolve so that M remains stationary is (a) (1/2π)√(Mg/ml) (b) (1/π)√(Mg/ml) (c) (1/2π)√(ml/Mg) (d) (1/π)√(ml/Mg). (Figure: m on a table moving in a circle of radius l about the hole O; M hangs below the hole.)

Solution. (a). Mass m performs uniform circular motion on the table. Let n be the frequency of revolution; then the centrifugal force = m4π2n2l. For equilibrium this force will be equal to the weight Mg: m4π2n2l = Mg, so n = (1/2π)√(Mg/ml).

Teacher's Note: Tension in the string equals Mg and also supplies the centripetal force on m.

Exam Note: Equate tension Mg with m4π2n2l.

Question 116. A particle of mass M moves with constant speed along a circular path of radius r under the action of a force F. Its speed is [MP PMT 2002] (a) √(rF/m) (b) √(F/r) (c) √(Fmr) (d) √(F/mr)

Solution. (a). Centripetal force F = mv2/r, so v = √(rF/m). (The book writes the mass as M in the statement and m in the options and solution.)

Teacher's Note: Solve F = mv2/r for v.

Exam Note: Rearrange F = mv2/r.

Question 117. In an atom for the electron to revolve around the nucleus, the necessary centripetal force is obtained from the following force exerted by the nucleus on the electron (a) Nuclear force (b) Gravitational force (c) Magnetic force (d) Electrostatic force

Solution. (d). (Only the answer is printed.)

Teacher's Note: Coulomb attraction between nucleus and electron supplies the centripetal force.

Exam Note: Name Coulomb (electrostatic) force.

Question 118. A motor cycle driver doubles its velocity when he is having a turn. The force exerted outwardly will be [AFMC 2002] (a) Double (b) Half (c) 4 times (d) 1/4 times

Solution. (c). F = mv2/r, so F ∝ v2 or F2/F1 = (v2/v1)2 = (2v/v)2 = 4, so F2 = 4F1.

Teacher's Note: Force varies as v2, so doubling the speed quadruples it.

Exam Note: State F is proportional to v2.

Question 119. A bottle of soda water is grasped by the neck and swung briskly in a vertical circle. Near which portion of the bottle do the bubbles collect? (a) Near the bottom (b) In the middle of the bottle (c) Near the neck (d) Uniformly distributed in the bottle

Solution. (c). Due to the lightness of the gas bubble they feel less centrifugal force so they collect near the neck of the bottle. They collect near the centre of circular motion i.e. near the neck of the bottle.

Teacher's Note: Heavier water is thrown outward (to the bottom), pushing light bubbles inward toward the neck.

Exam Note: Link bubbles to lower inertia and the inward direction.

Question 120. A body is performing circular motion. An observer O1 is sitting at the centre of the circle and another observer O2 is sitting on the body. The centrifugal force is experienced by the observer (a) O1 only (b) O2 only (c) Both O1 and O2 (d) None of these

Solution. (b). Centrifugal force is a pseudo force, which is experienced only by that observer who is attached with the body performing circular motion.

Teacher's Note: Pseudo forces appear only in the rotating (non-inertial) frame of the body.

Exam Note: Say pseudo force, non-inertial frame.

3.13 Work done by Centripetal Force - Sample problem based on work done

Question 121. A particle does uniform circular motion in a horizontal plane. The radius of the circle is 20 cm. The centripetal force acting on the particle is 10 N. Its kinetic energy is (a) 0.1 Joule (b) 0.2 Joule (c) 2.0 Joule (d) 1.0 Joule

Solution. (d). mv2/r = 10 N (given), so mv2 = 10 × r = 10 × 0.2 = 2. Kinetic energy = (1/2)mv2 = (1/2)(2) = 1 Joule.

Teacher's Note: Get mv2 from the force, then halve it; convert 20 cm to 0.2 m.

Exam Note: Convert cm to m first.

Question 122. A body of mass 100 g is rotating in a circular path of radius r with constant velocity. The work done in one complete revolution is [AFMC 1998] (a) 100r Joule (b) (r/100) Joule (c) (100/r) Joule (d) Zero

Solution. (d). Because in uniform circular motion work done by the centripetal force is always zero.

Teacher's Note: Force is perpendicular to displacement at every instant, so W = Fs cos 90° = 0.

Exam Note: Quote W = Fs cos 90° = 0.

Question 123. A particle of mass m is describing a circular path of radius r with uniform speed. If L is the angular momentum of the particle about the axis of rotation, the kinetic energy of the particle is given by [CPMT 1995] (a) L2/mr2 (b) L2/2mr2 (c) 2L2/mr2 (d) mr2L

Solution. (b). Rotational kinetic energy E = L2/2I = L2/2mr2 (as for a particle I = mr2).

Teacher's Note: Use E = L2/2I with I = mr2 for a point mass.

Exam Note: Write L = Iω, then E = (1/2)Iω2.

3.14 Skidding of Vehicle on a Level Road - Sample problems

Question 124. Find the maximum velocity for overturn for a car moved on a circular track of radius 100 m. The coefficient of friction between the road and tyre is 0.2. (a) 0.14 m/s (b) 140 m/s (c) 1.4 km/s (d) 14 m/s

Solution. (d). vmax = √(μrg) = √(0.2 × 100 × 10) = 10√2 = 14 m/s.

Teacher's Note: Friction gives the centripetal force: vmax = √(μrg), g = 10 m/s2.

Exam Note: Use g = 10 as in the book.

Question 125. When the road is dry and the coefficient of friction is μ, the maximum speed of a car in a circular path is 10 m/s. If the road becomes wet and μ' = μ/2, what is the maximum speed permitted? (a) 5 m/s (b) 10 m/s (c) 10√2 m/s (d) 5√2 m/s

Solution. (d). v ∝ √μ, so v2/v1 = √(μ2/μ1) = √((μ/2)/μ) = 1/√2, so v2 = v1/√2 = 10/√2 = 5√2 m/s.

Teacher's Note: Speed varies as √μ, so halving μ divides speed by √2, not 2.

Exam Note: Remember the square root in v = √(μrg).

Question 126. The coefficient of friction between the tyres and the road is 0.25. The maximum speed with which a car can be driven round a curve of radius 40 m with skidding is (assume g = 10 m s-2) (a) 40 m s-1 (b) 20 m s-1 (c) 15 m s-1 (d) 10 m s-1

Solution. (d). vmax = √(μrg) = √(0.25 × 40 × 10) = 10 m/s.

Teacher's Note: Maximum safe speed without skidding is √(μrg) = √100.

Exam Note: Substitute directly into v = √(μrg).

3.16 Bending of a Cyclist - Sample problem based on bending of cyclist

Question 127. A boy on a cycle pedals around a circle of 20 metres radius at a speed of 20 metres/sec. The combined mass of the boy and the cycle is 90 kg. The angle that the cycle makes with the vertical so that it may not fall is (g = 9.8 m/sec2) [MP PMT 1995] (a) 60.25° (b) 63.90° (c) 26.12° (d) 30.00°

Solution. (b). r = 20 m, v = 20 m/s, m = 90 kg, g = 9.8 m/s2 (given). θ = tan-1(v2/rg) = tan-1(20 × 20/(20 × 9.8)) = tan-1(2.04) = 63.90°. (The book prints 20 × 10 in the denominator and tan-1(2); with g = 9.8 the correct value is 2.04, giving 63.90°, the printed answer.)

Teacher's Note: Leaning angle from tan θ = v2/rg; mass cancels out.

Exam Note: Use g = 9.8 as given; mass is a distractor.

Question 128. If a cyclist moving with a speed of 4.9 m/s on a level road can take a sharp circular turn of radius 4 m, then coefficient of friction between the cycle tyres and road is (a) 0.41 (b) 0.51 (c) 0.71 (d) 0.61

Solution. (d). v = 4.9 m/s, r = 4 m and g = 9.8 m/s2 (given). μ = v2/rg = (4.9 × 4.9)/(4 × 9.8) = 0.61.

Teacher's Note: Friction supplies the centripetal force, so μ = v2/rg.

Exam Note: Rearrange μ = v2/rg; mass cancels.

Question 129. A cyclist taking turn bends inwards while a car passenger taking same turn is thrown outwards. The reason is [NCERT 1972] (a) Car is heavier than cycle (b) Car has four wheels while cycle has only two (c) Difference in the speed of the two (d) Cyclist has to counteract the centrifugal force while in the case of car only the passenger is thrown by this force

Solution. (d). (Only the answer is printed.)

Teacher's Note: Cyclist leans so that the normal reaction's horizontal component gives centripetal force; passenger lacks this and slides outward.

Exam Note: Mention leaning supplies the inward force.

3.17 Banking of a Road - Sample problems based on banking of a road

Question 130. For traffic moving at 60 km/hr along a circular track of radius 0.1 km, the correct angle of banking is [MNR 1993] (a) (60)2/0.1 (b) tan-1[(50/3)2/(100 × 9.8)] (c) tan-1[(100 × 9.8)/(50/3)2] (d) tan-1√(60 × 0.1 × 9.8)

Solution. (b). v = 60 km/hr = 50/3 m/s, r = 0.1 km = 100 m, g = 9.8 m/s2 (given). Angle of banking tan θ = v2/rg, or θ = tan-1(v2/rg) = tan-1[(50/3)2/(100 × 9.8)].

Teacher's Note: Convert km/h to m/s (multiply by 5/18) and km to m before tan θ = v2/rg.

Exam Note: Unit conversion is the only trap; keep SI units.

Question 131. A vehicle is moving with a velocity v on a curved road of width b and radius of curvature R. For counteracting the centrifugal force on the vehicle, the difference in elevation required in between the outer and inner edges of the road is (a) v2b/Rg (b) rb/Rg (c) vb2/Rg (d) vb/R2g

Solution. (a). For banking of road tan θ = v2/rg and tan θ = h/l. So v2/rg = h/l, giving h = v2l/rg = v2b/Rg [as l = b and r = R given].

Teacher's Note: For small angles tan θ = h/b, so h = bv2/Rg.

Exam Note: Equate tan θ = v2/Rg with h/b.

Question 132. The radius of curvature of a road at a certain turn is 50 m. The width of the road is 10 m and its outer edge is 1.5 m higher than the inner edge. The safe speed for such an inclination will be (a) 6.5 m/s (b) 8.6 m/s (c) 8 m/s (d) 10 m/s

Solution. (b). h = 1.5 m, r = 50 m, l = 10 m, g = 10 m/s2 (given). v2/rg = h/l, so v = √(hrg/l) = √(1.5 × 50 × 10/10) = 8.6 m/s.

Teacher's Note: Banking angle: tan θ = h/l = 0.15; then v = √(rg tan θ).

Exam Note: Use h/l for tan θ, not h/r.

Question 133. Keeping the banking angle same, to increase the maximum speed with which a car can travel on a curved road by 10%, the radius of curvature of road has to be changed from 20 m to [EAMCET 1991] (a) 16 m (b) 18 m (c) 24.25 m (d) 30.5 m

Solution. (c). tan θ = v2/rg, so r ∝ v2 (if θ is constant). r2/r1 = (v2/v1)2 = (1.1v/v)2 = 1.21, so r2 = 1.21 × r1 = 1.21 × 20 = 24.2 m (nearest option 24.25 m).

Teacher's Note: At fixed angle r is proportional to v2, so a 10% speed rise gives 21% rise in r.

Exam Note: Square 1.1 to get 1.21; pick nearest option.

Question 134. The slope of the smooth banked horizontal road is p. If the radius of the curve be r, the maximum velocity with which a car can negotiate the curve is given by (a) prg (b) √(prg) (c) p/rg (d) √(p/rg)

Solution. (b). tan θ = v2/rg, so p = v2/rg, hence v = √(prg).

Teacher's Note: Slope p means tan θ = p; substitute into v2 = rg tan θ.

Exam Note: Slope equals tan θ.

3.18 Overturning of Vehicle - Sample problems based on overturning of vehicle

Question 135. The distance between two rails is 1.5 m. The centre of gravity of the train at a height of 2 m from the ground. The maximum speed of the train on a circular path of radius 120 m can be (a) 10.5 m/s (b) 42 m/s (c) 21 m/s (d) 84 m/s

Solution. (c). Height of centre of gravity from the ground h = 2 m, acceleration due to gravity g = 10 m/s2, distance between two rails 2a = 1.5 m (a = 0.75 m), radius of circular path r = 120 m (given). vmax = √(gra/h) = √(10 × 120 × 0.75/2) = 21.2 m/s.

Teacher's Note: Overturning limit v = √(gra/h), where 2a is the rail gauge, so a = 0.75 m.

Exam Note: Use half the track width a, not 1.5 m.

Question 136. A car sometimes overturns while taking a turn. When it overturns, it is [AFMC 1988] (a) The inner wheel which leaves the ground first (b) The outer wheel which leaves the ground first (c) Both the wheels leave the ground simultaneously (d) Either wheel leaves the ground first

Solution. (a). (Only the answer is printed.)

Teacher's Note: Inner wheel's reaction R1 falls to zero first as speed rises.

Exam Note: State R1 = 0 at overturning.

Question 137. A car is moving on a circular path and takes a turn. If R1 and R2 be the reactions on the inner and outer wheels respectively, then (a) R1 = R2 (b) R1 < R2 (c) R1 > R2 (d) R1 ≥ R2

Solution. (b). Reaction on inner wheel R1 = (M/2)[g - v2h/ra] and reaction on outer wheel R2 = (M/2)[g + v2h/ra]. Therefore R1 < R2.

Teacher's Note: The outer wheel carries extra load, the inner wheel less, because of the torque of the centripetal force.

Exam Note: Quote R1,2 = (M/2)[g ∓ v2h/ra].

Question 138. A train A runs from east to west and another train B of the same mass runs from west to east at the same speed along the equator. A presses the track with a force F1 and B presses the track with a force F2 (a) F1 > F2 (b) F1 < F2 (c) F1 = F2 (d) The information is insufficient to find the relation between F1 and F2

Solution. (a). We know that earth revolves about its own axis from west to east. Let its angular speed be ωe and the angular speed of the train be ωt. For train A: net angular speed = (ωe - ωt) because the sense of rotation of train is opposite to that of earth. So reaction of track R1 = F1 = mg - m(ωe - ωt)2R. For train B: net angular speed = (ωe + ωt) because the sense of rotation of train is same as that of earth. So reaction of track R2 = F2 = mg - m(ωe + ωt)2R. So it is clear that F1 > F2.

Teacher's Note: Train moving with Earth's spin needs more centripetal force, leaving less normal reaction.

Exam Note: Compare net angular speeds (ωe ∓ ωt).

3.20 Reaction of Road on Car - Sample problem based on reaction of road

Question 139. The road way bridge over a canal is in the form of an arc of a circle of radius 20 m. What is the minimum speed with which a car can cross the bridge without leaving contact with the ground at the highest point (g = 9.8 m/s2)? (a) 7 m/s (b) 14 m/s (c) 289 m/s (d) 5 m/s

Solution. (b). At the highest point of the bridge, for the critical condition mg - mv2/r = 0, so mv2/r = mg. Therefore vmax = √(gr) = √(9.8 × 20) = √196 = 14 m/s.

Teacher's Note: At the crest, contact is lost when the normal reaction becomes zero and gravity alone gives mv2/r.

Exam Note: Put N = 0 at the top of the arc.

Question 140. A car moves at a constant speed on a road as shown in the figure. The normal force exerted by the road on the car is NA and NB when it is at the points A and B respectively. (a) NA = NB (b) NA > NB (c) NA < NB (d) All possibilities are there. (Figure: a wavy road; A and B are at the tops of two crests, the crest at A being more sharply curved, i.e. of smaller radius, than the one at B.)

Solution. (c). From the formula N = mg - mv2/r, N ∝ r. As rA < rB, therefore NA < NB.

Teacher's Note: Both points are crests; the smaller radius at A gives larger mv2/r and a smaller normal force.

Exam Note: Compare radii of curvature in N = mg - mv2/r.

Question 141. A car while travelling at a speed of 72 km/hr passes through a curved portion of road in the form of an arc of radius 10 m. If the mass of the car is 500 kg, the reaction of the car at the lowest point P is (a) 25 kN (b) 50 kN (c) 75 kN (d) None of these. (Figure: a car moving at 72 km/hr on a road that dips along a semicircular arc, P being the lowest point.)

Solution. (a). v = 72 km/h = 20 m/s, r = 10 m, m = 500 kg (given). Reaction at the lowest point R = mg + mv2/r = 500 × 10 + 500 × (20)2/10 = 25000 N = 25 kN.

Teacher's Note: At the lowest point the normal force exceeds weight by mv2/r; convert 72 km/h to 20 m/s.

Exam Note: Add mv2/r to mg at a dip.

3.21 Non-Uniform Circular Motion - Sample problems based on non-uniform circular motion

Question 142. The kinetic energy k of a particle moving along a circle of radius R depends on the distance covered. It is given as K.E. = as2 where a is a constant. The force acting on the particle is [MNR 1992; JIPMER 2001, 2002] (a) 2a(s2/R) (b) 2as(1 + s2/R2)1/2 (c) 2as (d) 2a(R2/s)

Solution. (b). In non-uniform circular motion two forces act on a particle, Fc and Ft, so the net force FNet = √(Fc2 + Ft2) ...(i). Centripetal force Fc = mv2/R = 2as2/R ...(ii) [as kinetic energy (1/2)mv2 = as2 given]. Again from (1/2)mv2 = as2: v2 = 2as2/m, so v = s√(2a/m). Tangential acceleration at = dv/dt = (dv/ds)(ds/dt) = √(2a/m)·v = s(2a/m) = 2as/m, and Ft = mat = 2as ...(iii). Substituting Fc and Ft in (i): FNet = √((2as2/R)2 + (2as)2) = 2as[1 + s2/R2]1/2.

Teacher's Note: Net force is the vector sum of the centripetal part (from v) and tangential part (from dv/dt).

Exam Note: Find Fc and Ft separately, then add in quadrature.

Question 143. A particle of mass m is moving in a circular path of constant radius r such that its centripetal acceleration ac is varying with time t as ac = k2rt2, where k is a constant. The power delivered to the particle by the forces acting on it is (a) 2πmk2r2t (b) mk2r2t (c) mk4r2t5/3 (d) Zero

Solution. (b). ac = k2rt2 = v2/r, so v2 = k2r2t2 and v = krt. Tangential acceleration at = dv/dt = kr. As centripetal force does not work in circular motion, power delivered by the tangential force P = Ftv = matv = m(kr)(krt) = mk2r2t.

Teacher's Note: Only the tangential force does work, so P = Ftv with v = krt.

Exam Note: Ignore centripetal force in power calculations.

Question 144. A simple pendulum is oscillating without damping. When the displacement of the bob is less than maximum, its acceleration vector a is correctly shown in (Figure: four sketches (a), (b), (c), (d) of a pendulum bob on its circular arc, each with an acceleration arrow. In (a) the arrow points along the string towards the pivot; in (b) it points away from the pivot, down and to the left; in (c) it points up and to the left, between the direction towards the pivot and the tangent to the path; in (d) it points vertically downward.)

Solution. (c). ac = centripetal acceleration (along the string towards the pivot), at = tangential acceleration, aN = net acceleration = resultant of ac and at, aN = √(ac2 + at2). So the net acceleration points between the string direction and the tangent.

Teacher's Note: Away from extremes the bob has both radial (v2/L) and tangential (g sin θ) acceleration.

Exam Note: Draw ac and at and add them as vectors.

Question 145. The speed of a particle moving in a circle of radius 0.1 m is v = 1.0t where t is time in second. The resultant acceleration of the particle at t = 5 s will be (a) 10 m/s2 (b) 100 m/s2 (c) 250 m/s2 (d) 500 m/s2

Solution. (c). v = 1.0t, so at = dv/dt = 1 m/s2. ac = v2/r = (5)2/0.1 = 250 m/s2 [at t = 5 s, v = 5 m/s]. aN = √(ac2 + at2) = √((250)2 + 12) ⇒ aN = 250 m/s2 (approx.).

Teacher's Note: Tangential part 1 m/s2 is negligible next to centripetal 250 m/s2.

Exam Note: Add components in quadrature, then approximate.

Question 146. A particle moving along the circular path with a speed v and its speed increases by 'g' in one second. If the radius of the circular path be r, then the net acceleration of the particle is (a) v2/r + g (b) v2/r2 + g2 (c) [v4/r2 + g2]1/2 (d) [v2/r + g]1/2

Solution. (c). at = g (given) and ac = v2/r, so aN = √(at2 + ac2) = √((v2/r)2 + g2) = √(v4/r2 + g2).

Teacher's Note: Speed rising by g each second means at = g; combine with ac at right angles.

Exam Note: Add perpendicular components in quadrature, not directly.

Question 147. A car is moving with speed 30 m/sec on a circular path of radius 500 m. Its speed is increasing at the rate of 2 m/sec2. What is the acceleration of the car? [Roorkee 1982; RPET 1996; MH CET 2002; MP PMT 2003] (a) 2 m/s2 (b) 2.7 m/s2 (c) 1.8 m/s2 (d) 9.8 m/s2

Solution. (b). at = 2 m/s2 and ac = v2/r = (30 × 30)/500 = 1.8 m/s2. Therefore a = √(at2 + ac2) = √(22 + (1.8)2) = 2.7 m/s2.

Teacher's Note: Total acceleration combines tangential (speeding up) and centripetal (turning) parts.

Exam Note: Quote a = √(at2 + ac2).

Question 148. For a particle in circular motion the centripetal acceleration is [CPMT 1998] (a) Less than its tangential acceleration (b) Equal to its tangential acceleration (c) More than its tangential acceleration (d) May be more or less than its tangential acceleration

Solution. (d). (Only the answer is printed.)

Teacher's Note: The two components are independent: ac = v2/r depends on speed, at on rate of change of speed.

Exam Note: State that ac and at are independent.

Question 149. A particle is moving along a circular path of radius 3 metre in such a way that the distance travelled measured along the circumference is given by s = t2/2 + t3/3. The acceleration of the particle when t = 2 sec is (a) 1.3 m/s2 (b) 13 m/s2 (c) 3 m/s2 (d) 10 m/s2

Solution. (b). s = t2/2 + t3/3, so v = ds/dt = t + t2 and at = dv/dt = d(t + t2)/dt = 1 + 2t. At t = 2 s, v = 6 m/s and at = 5 m/s2, ac = v2/r = 36/3 = 12 m/s2. aN = √(ac2 + at2) = √(122 + 52) = 13 m/s2.

Teacher's Note: Differentiate s twice for at; use v2/r for ac (a 5-12-13 triangle).

Exam Note: Differentiate before substituting t = 2.

3.22 Equations of Circular Motion - Sample problems based on equation of circular motion

Question 150. The angular velocity of a particle is given by ω = 1.5t - 3t2 + 2, the time when its angular acceleration ceases to be zero will be (a) 25 sec (b) 0.25 sec (c) 12 sec (d) 1.2 sec

Solution. (b). ω = 1.5t - 3t2 + 2 and α = dω/dt = 1.5 - 6t. Setting 0 = 1.5 - 6t gives t = 1.5/6 = 0.25 sec. (As printed in the book, the question says 'ceases to be zero'; the solution finds the time when the angular acceleration becomes zero.)

Teacher's Note: Differentiate ω to get α and set it to zero.

Exam Note: Take dω/dt first; then solve the linear equation.

Question 151. A wheel is subjected to uniform angular acceleration about its axis. Initially its angular velocity is zero. In the first 2 sec, it rotates through an angle θ1. In the next 2 sec, it rotates through an additional angle θ2. The ratio of θ1/θ2 is [AIIMS 1982] (a) 1 (b) 2 (c) 3 (d) 5

Solution. (c). Corrected: from θ = ω1t + (1/2)αt2: θ1 = 0 + (1/2)α(2)2 = 2α ...(i) [ω1 = 0, t = 2 s]. For the second condition θ1 + θ2 = 0 + (1/2)α(4)2 = 8α ...(ii) [t = 2 + 2 = 4 s]. From (i) and (ii), θ1 = 2α and θ2 = 6α, so θ2/θ1 = 3. Note: the printed question asks θ1/θ2, which would be 1/3 (not among the options); the book's answer (c) 3 is for the ratio θ2/θ1, which is the intended question.

Teacher's Note: Distances in equal successive intervals from rest are in the ratio 1 : 3, so θ2/θ1 = 3.

Exam Note: Use total angle over 4 s minus angle over 2 s.

Question 152. If the equation for the displacement of a particle moving on a circular path is given by θ = 2t3 + 0.5, where θ is in radians and t in seconds, then the angular velocity of the particle after 2 sec from its start is [AIIMS 1998] (a) 8 rad/sec (b) 12 rad/sec (c) 24 rad/sec (d) 36 rad/sec

Solution. (c). θ = 2t3 + 0.5 and ω = dθ/dt = 6t2. At t = 2 s, ω = 6(2)2 = 24 rad/s.

Teacher's Note: Angular velocity is the time derivative of θ; the constant 0.5 drops out.

Exam Note: Differentiate first, then substitute t = 2.

Question 153. A grinding wheel attained a velocity of 20 rad/sec in 5 sec starting from rest. Find the number of revolutions made by the wheel (a) π/25 rev/sec (b) 1/π rev/sec (c) 25/π rev/sec (d) None of these

Solution. (c). ω1 = 0, ω2 = 20 rad/s, t = 5 s. α = (ω2 - ω1)/t = (20 - 0)/5 = 4 rad/s2. θ = ω1t + (1/2)αt2 = 0 + (1/2)(4)(5)2 = 50 rad. 2π rad means 1 revolution, so 50 rad means 50/2π = 25/π rev.

Teacher's Note: Find angle in radians (50), then divide by 2π for revolutions.

Exam Note: Divide radians by 2π to get revolutions.

Question 154. A grind stone starts from rest and has a constant angular acceleration of 4.0 rad/sec2. The angular displacement and angular velocity, after 4 sec. will respectively be (a) 32 rad, 16 rad/sec (b) 16 rad, 32 rad/sec (c) 64 rad, 32 rad/sec (d) 32 rad, 64 rad/sec

Solution. (a). ω1 = 0, α = 4 rad/s2, t = 4 s. Angular displacement θ = ω1t + (1/2)αt2 = 0 + (1/2)·4·(4)2 = 32 rad. Final angular velocity ω2 = ω1 + αt = 0 + 4 × 4 = 16 rad/s.

Teacher's Note: Use θ = (1/2)αt2 and ω = αt from rest.

Exam Note: Do not swap displacement and velocity formulas.

Question 155. An electric fan is rotating at a speed of 600 rev/minute. When the power supply is stopped, it stops after 60 revolutions. The time taken to stop is (a) 12 s (b) 30 s (c) 45 s (d) 60 s

Solution. (a). ω1 = 600 rev/min = 10 rev/s, ω2 = 0 and θ = 60 rev. From ω22 = ω12 - 2αθ: 0 = (10)2 - 2α(60), so α = 100/120 = 5/6 rev/s2. Again ω2 = ω1 - αt: 0 = ω1 - αt, so t = ω1/α = 10 × 6/5 = 12 s.

Teacher's Note: Keep rev and seconds throughout; find retardation from ω2 = ω02 - 2αθ, then time.

Exam Note: Convert rpm to rev/s; revolutions as the angle unit are fine.

3.23 Motion in Vertical Circle

Sample problems based on vertical looping

Question 156. A small block is shot into each of the four tracks as shown below. Each of the tracks rises to the same height. The speed with which the block enters the track is the same in all cases. At the highest point of the track, the normal reaction is maximum in (a) (b) (c) (d). (Figure: four tracks (a) to (d), each a horizontal run that curves up into a loop-like arc reaching the same height; the radius of curvature at the top is smallest in (a) and increases through (b) and (c) to (d).)

Solution. (a). The book prints no option letter; it states: at the highest point R = mv2/r - mg. For maximum R, the value of the radius of curvature (r) should be minimum and it is minimum in the first condition, i.e. track (a). (Answer letter taken from 'first condition'; please check against the figure.)

Teacher's Note: Same height means same speed at the top, so N = mv2/r - mg is largest for the smallest radius.

Exam Note: Link larger curvature (smaller r) to larger normal force.

Question 157. A stone tied to string is rotated in a vertical circle. The minimum speed with which the string has to be rotated [EAMCET (Engg.) 1998; CBSE PMT 1999] (a) Decreases with increasing mass of the stone (b) Is independent of the mass of the stone (c) Decreases with increasing in length of the string (d) Is independent of the length of the string

Solution. (b). v = √(5gr) for the lowest point of the vertical loop, so v ∝ m0, i.e. it does not depend on the mass of the body.

Teacher's Note: Minimum speed √(5gl) at the bottom has no mass term but grows with length.

Exam Note: Mass cancels in the critical-speed condition.

Question 158. A mass m is revolving in a vertical circle at the end of a string of length 20 cms. By how much does the tension of the string at the lowest point exceed the tension at the topmost point? (a) 2 mg (b) 4 mg (c) 6 mg (d) 8 mg

Solution. (c). Tlowest point - Thighest point = 6mg (always).

Teacher's Note: The difference is 6mg whatever the speed or length; use energy conservation plus radial equations.

Exam Note: Quote Tbottom - Ttop = 6mg as standard result.

Question 159. In a simple pendulum, the breaking strength of the string is double the weight of the bob. The bob is released from rest when the string is horizontal. The string breaks when it makes an angle θ with the vertical (a) θ = cos-1(1/3) (b) θ = 60° (c) θ = cos-1(2/3) (d) θ = 0°

Solution. (c). Let the string break at point B. Tension = mg cos θ + mvB2/r = breaking strength = 2mg ...(i). If the bob is released from rest (from point A) then the velocity acquired by it at point B is vB = √(2gh) = √(2gr cos θ) ...(ii) [as h = r cos θ]. Substituting in (i): mg cos θ + (m/r)(2gr cos θ) = 2mg, or 3mg cos θ = 2mg, so cos θ = 2/3 and θ = cos-1(2/3).

Teacher's Note: Tension = mg cos θ + mv2/r with v2 = 2gr cos θ gives T = 3mg cos θ.

Exam Note: Set 3mg cos θ equal to breaking tension 2mg.

Question 160. A toy car rolls down the inclined plane as shown in the fig. It goes around the loop at the bottom. What is the relation between H and h? (a) H/h = 2 (b) H/h = 3 (c) H/h = 4 (d) H/h = 5. (Figure: a car at height H on a curved ramp leading into a vertical loop of radius r at the bottom; h is the height of the top of the loop.)

Solution. (d). When the car rolls down the inclined plane from height H, the velocity acquired at the lowest point is v = √(2gH) ...(i). For looping the loop, velocity at the lowest point should be v = √(5gr) ...(ii). From (i) and (ii), √(2gH) = √(5gr), so H = 5r/2 ...(iii). From the figure H = h + 2r, so r = (H - h)/2. Substituting in (iii): H = (5/2)[(H - h)/2], so H/h = 5.

Teacher's Note: Combine energy conservation (v = √(2gH)) with critical loop speed √(5gr).

Exam Note: Use h = 2r as loop-top height.

Question 161. The mass of the bob of a simple pendulum of length L is m. If the bob is left from its horizontal position then the speed of the bob and the tension in the thread in the lowest position of the bob will be respectively (a) √(2gL) and 3mg (b) 3mg and √(2gL) (c) 2mg and √(2gl) (d) 2gl and 3mg

Solution. (a). By conservation of energy: potential energy at point A = kinetic energy at point B, so mgl = (1/2)mv2 and v = √(2gl). Tension = mg + mv2/l = mg + (m/l)(2gl), so T = 3mg.

Teacher's Note: Energy gives v = √(2gL); at the bottom T = mg + mv2/L = 3mg.

Exam Note: Both results are standard: v = √(2gL), T = 3mg.

Question 162. A stone of mass m is tied to a string and is moved in a vertical circle of radius r making n revolutions per minute. The total tension in the string when the stone is at its lowest point is [Kerala (Engg.) 2001] (a) m{g + (π2n2r)/900} (b) m(g + πnr2) (c) m(g + πnr) (d) m(g + n2r2)

Solution. (a). Tension at the lowest point T = mg + mω2r = mg + m4π2n2r. If n is revolutions per minute then T = mg + m4π2(n2/3600)r = mg + mπ2n2r/900 = m[g + π2n2r/900].

Teacher's Note: Convert n rev/min to rev/s by dividing by 60 before using ω = 2πn.

Exam Note: The 3600 from (60)2 reduces 4π2 to π2/900.

Question 163. A particle is kept at rest at the top of a sphere of diameter 42 m. When disturbed slightly, it slides down. At what height h from the bottom, the particle will leave the sphere? [IMS-BHU 2003] (a) 14 m (b) 28 m (c) 35 m (d) 7 m

Solution. (c). Let the particle leave the sphere at height h from the bottom. We know for the given condition x = (2/3)r, and h = r + x = r + (2/3)r = (5/3)r = (5/3) × 21 = 35 m [as r = 21 m].

Teacher's Note: Contact is lost when the block is 2r/3 above the centre, i.e. at height 5r/3 from the bottom.

Exam Note: Use radius 21 m (half of 42 m), not the diameter.

Question 164. A bucket tied at the end of a 1.6 m long string is whirled in a vertical circle with constant speed. What should be the minimum speed so that the water from the bucket does not spill, when the bucket is at the highest position? (Take g = 10 m/sec2) (a) 4 m/sec (b) 6.25 m/sec (c) 16 m/sec (d) None of these

Solution. (a). v = √(gr) = √(10 × 1.6) = √16 = 4 m/s.

Teacher's Note: At the top, water stays if gravity alone gives the centripetal force: vmin = √(gr).

Exam Note: Use √(gr) at the top, not √(5gr).

Question 165. The ratio of velocities at points A, B and C in vertical circular motion is (a) 1 : 9 : 25 (b) 1 : 2 : 3 (c) 1 : 3 : 5 (d) 1 : √3 : √5. (Figure: a vertical circle with centre O; A is the top, B the point level with the centre, C the bottom.)

Solution. (d). vA : vB : vC = √(gr) : √(3gr) : √(5gr) = 1 : √3 : √5.

Teacher's Note: These are the critical-loop speeds at top, side and bottom: √(gr), √(3gr), √(5gr).

Exam Note: Recall the critical speeds; ratio is of square roots.

Question 166. The minimum speed for a particle at the lowest point of a vertical circle of radius R, to describe the circle is 'v'. If the radius of the circle is reduced to one-fourth its value, the corresponding minimum speed will be [EAMCET (Engg.) 1999] (a) v/4 (b) v/2 (c) 2v (d) 4v

Solution. (b). v = √(5gr), so v ∝ √r. Therefore v2/v1 = √(r2/r1) = √((r/4)/r) = 1/2, so v2 = v/2.

Teacher's Note: Minimum speed varies as √r, so one-fourth radius gives half the speed.

Exam Note: Take the square root of the ratio 1/4.

Question 167. A body slides down a frictionless track which ends in a circular loop of diameter D, then the minimum height h of the body in terms of D so that it may just complete the loop, is [AIIMS 2000] (a) h = 5D/2 (b) h = 5D/4 (c) h = 3D/4 (d) h = D/4

Solution. (b). We know h = (5/2)r = (5/2)(D/2) = 5D/4 [for critical condition of vertical looping].

Teacher's Note: Energy gives mgh = (1/2)m(5gr) when it just completes the loop; h = 5r/2.

Exam Note: Convert r = D/2 at the end.

Question 168. A can filled with water is revolved in a vertical circle of radius 4 m and the water just does not fall down. The time period of revolution will be [CPMT 1985; RPET 1999] (a) 1 sec (b) 10 sec (c) 8 sec (d) 4 sec

Solution. (d). At the highest point mg = mω2r, so g = (4π2/T2)r, i.e. 10 = 4π2·4/T2, so T2 = 16 (taking π2 ≈ 10) and T = 4 sec.

Teacher's Note: At the top, gravity alone supplies centripetal force: g = ω2r with ω = 2π/T.

Exam Note: Use π2 ≈ 10; T = 2π√(r/g).

Question 169. A particle is moving in a vertical circle. The tensions in the string when passing through two positions at angles 30° and 60° from vertical (lowest position) are T1 and T2 respectively. Then (a) T1 = T2 (b) T1 > T2 (c) T1 < T2 (d) T1 ≥ T2

Solution. (b). T = mg cos θ + mv2/r. As θ increases T decreases. So T1 > T2.

Teacher's Note: Higher up the circle, speed and cos θ both fall, so tension decreases.

Exam Note: Tension is greatest at the bottom and decreases with angle.

Question 170. A mass of 2 kg is tied to the end of a string of length 1 m. It is, then, whirled in a vertical circle with a constant speed of 5 ms-1. Given that g = 10 ms-2. At which of the following locations tension in the string will be 70 N? (a) At the top (b) At the bottom (c) When the string is horizontal (d) At none of the above locations

Solution. (b). Centrifugal force F = mv2/r = 2 × (5)2/1 = 50 N. Weight = mg = 2 × 10 = 20 N. Tension = 70 N (sum of the above two forces), i.e. the mass is at the bottom of the vertical circular path.

Teacher's Note: T = mv2/r + mg = 70 N occurs only at the bottom, where both act against the tension.

Exam Note: Add mg at the bottom, subtract at the top.

Question 171. With what angular velocity should a 20 m long cord be rotated such that tension in it, while reaching the highest point, is zero (a) 0.5 rad/sec (b) 0.2 rad/sec (c) 7.5 rad/sec (d) 0.7 rad/sec

Solution. (d). ω = √(g/r) = √(10/20) = √0.5 = 0.7 rad/sec.

Teacher's Note: Zero tension at the top means mg = mω2r, so ω = √(g/r).

Exam Note: Set T = 0 at the top.

Question 172. A body of mass 100 g is attached to a 1 m long string and it is revolving in a vertical circle. When the string makes an angle of 60° with the vertical then its speed is 2 m/s. The tension in the string at θ = 60° will be (a) 89 N (b) 0.89 N (c) 8.9 N (d) 0.089 N

Solution. (b). T = mg cos θ + mv2/r = 0.1 × 9.8 × cos 60° + 0.1 × (2)2/1 = 0.49 + 0.4 = 0.89 Newton.

Teacher's Note: Convert 100 g to 0.1 kg; tension is the radial component of weight plus mv2/r.

Exam Note: Convert mass to kg before substituting.

Question 173. A body of mass 2 kg is moving in a vertical circle of radius 2 m. The work done when it moves from the lowest point to the highest point is (a) 80 J (b) 40 J (c) 20 J (d) 0

Solution. (a). Work done = change in potential energy = 2mgr = 2 × 2 × 10 × 2 = 80 J.

Teacher's Note: Work equals gain in PE over height 2r; the centripetal force does no work.

Exam Note: Use ΔPE = mg(2r) with g = 10.

Question 174. A body of mass m is tied to one end of a string of length l and revolves vertically in a circular path. At the lowest point of circle, what must be the K.E. of the body so as to complete the circle [RPMT 1996] (a) 5 mgl (b) 4 mgl (c) 2.5 mgl (d) 2 mgl

Solution. (c). Minimum velocity at the lowest point to complete the vertical loop = √(5gl). So minimum kinetic energy = (1/2)m(v2) = (1/2)m(√(5gl))2 = (5/2)mgl = 2.5 mgl.

Teacher's Note: Critical speed √(5gl) at the bottom gives KE = 2.5mgl.

Exam Note: Substitute v2 = 5gl into (1/2)mv2.

3.24 Conical Pendulum - Sample problems based on conical pendulum

Question 175. A point mass m is suspended from a light thread of length l, fixed at O, is whirled in a horizontal circle at constant speed as shown. From your point of view, stationary with respect to the mass, the forces on the mass are (a), (b), (c), (d). (Figures: free-body sketches, each showing tension T along the thread towards O, weight W downward and, in some, a horizontal force F. In (c), T acts along the thread up and to the left, F acts horizontally outward (to the right) and W acts downward; the other sketches have F inward, or F on both sides, or no horizontal force.)

Solution. (c). Centrifugal force (F) works radially outward, weight (W) works downward, tension (T) works along the string and towards the point of suspension.

Teacher's Note: In the mass's own rotating frame there is an outward centrifugal force balancing the horizontal part of T.

Exam Note: Draw T, W and outward centrifugal F.

Question 176. A string of length L is fixed at one end and carries a mass M at the other end. The string makes 2/π revolutions per second around the vertical axis through the fixed end as shown in the figure, then tension in the string is [BHU 2002] (a) ML (b) 2ML (c) 4ML (d) 16ML

Solution. (d). T sin θ = Mω2R ...(i) and R = L sin θ ...(ii). From (i) and (ii): T = Mω2L = M4π2n2L = M4π2(2/π)2L = 16ML.

Teacher's Note: Along the string T sin θ = Mω2L sin θ, so T = Mω2L, independent of the angle.

Exam Note: Note ω = 2πn = 4 rad/s, so ω2 = 16.

Question 177. A string of length 1 m is fixed at one end and a mass of 100 gm is attached at the other end. The string makes 2/π rev/sec around a vertical axis through the fixed point. The angle of inclination of the string with the vertical is (g = 10 m/sec2) (a) tan-1(5/8) (b) tan-1(8/5) (c) cos-1(8/5) (d) cos-1(5/8)

Solution. (d). Corrected working: T sin θ = mω2r with r = L sin θ, so T = mω2L, and T cos θ = mg. Hence cos θ = g/(ω2L) = 10/(16 × 1) = 5/8, so θ = cos-1(5/8) (ω = 2πn = 4 rad/s). The book's printed working uses r = 1 m and gets tan θ = 8/5, which does not give its marked answer (d); the answer (d) is correct.

Teacher's Note: Since r = L sin θ, the angle follows from cos θ = g/ω2L.

Exam Note: Circle radius is L sin θ, not L.

Sample problems (Miscellaneous)

Question 178. If the frequency of the rotating platform is f and the distance of a boy from the centre is r, which is the area swept out per second by the line connecting the boy to the centre (a) πrf (b) 2πrf (c) πr2f (d) 2πr2f

Solution. (c). Area swept by the line in a complete revolution = πr2. If the frequency of the rotating platform is f per second, then the area swept per second will be πr2f.

Teacher's Note: One revolution sweeps the full circle area πr2; multiply by revolutions per second.

Exam Note: Area of circle times frequency.

Question 179. The figure shows a body of mass M moving with uniform speed v along a circle of radius R. What is the change in speed in going from P1 to P2? (a) Zero (b) √2 v (c) v/√2 (d) 2v. (Figure: circle with points P1 (right), P2 (top), P3 (left), P4 (bottom); motion is anticlockwise.)

Solution. (a). In uniform circular motion speed remains constant, therefore the change in speed is zero.

Teacher's Note: Speed is a scalar and stays constant; only velocity direction changes.

Exam Note: Do not confuse change in speed with change in velocity.

Question 180. In the above problem, what is the change in velocity in going from P1 to P2? (a) Zero (b) √2 v (c) v/√2 (d) 2v

Solution. (b). Change in velocity = 2v sin(θ/2) = 2v sin(90°/2) = 2v sin 45° = 2v/√2 = √2 v.

Teacher's Note: P1 to P2 is 90°; |Δv| = 2v sin(θ/2) for angle θ.

Exam Note: Velocity is a vector: use 2v sin(θ/2).

Question 181. In the above problem, what is the change in angular velocity in going from P1 to P2? (a) Zero (b) √2 v/R (c) v/√2R (d) 2v/R

Solution. (a). Angular velocity remains constant, so the change in angular velocity = zero.

Teacher's Note: Uniform circular motion has constant ω in magnitude and direction.

Exam Note: Constant ω means zero change.

Question 182. A particle of mass m is fixed to one end of a light spring of force constant k and unstretched length l. The system is rotated about the other end of the spring with an angular velocity ω, in gravity free space. The increase in length of the spring will be (a) mω2l/k (b) mω2l/(k - mω2) (c) mω2l/(k + mω2) (d) None of these

Solution. (b). In the given condition the elastic force provides the required centripetal force: kx = mω2r. kx = mω2(l + x), so kx = mω2l + mω2x, x(k - mω2) = mω2l. Therefore x = mω2l/(k - mω2).

Teacher's Note: The circle radius is l + x (stretched length), not l.

Exam Note: Use r = l + x in kx = mω2r.

Question 183. A uniform rod of mass m and length l rotates in a horizontal plane with an angular velocity ω about a vertical axis passing through one end. The tension in the rod at a distance x from the axis is (a) (1/2)mω2x (b) (1/2)mω2x2/l (c) (1/2)mω2l(1 - x/l) (d) (1/2)(mω2/l)[l2 - x2]

Solution. (d). Let rod AB perform uniform circular motion about point A. Consider the small segment at distance x of mass dm = (m/l)dx. So dT = dm·ω2x = (m/l)dx·ω2x = (mω2/l)x dx. Integrating from x to l: ∫xl dT = (mω2/l)∫xl x dx, so T = (mω2/l)[x2/2]xl = (mω2/2l)[l2 - x2].

Teacher's Note: Tension at x supplies centripetal force for the rod portion beyond x; integrate dm·ω2x.

Exam Note: Integrate from x to l, not 0 to x.

Question 184. A long horizontal rod has a bead which can slide along its length, and initially placed at a distance L from one end A of the rod. The rod is set in angular motion about A with constant angular acceleration α. If the coefficient of friction between the rod and the bead is μ, and gravity is neglected, then the time after which the bead starts slipping is (a) √(μ/α) (b) μ/√α (c) 1/√(μα) (d) Infinitesimal

Solution. (a). Let the bead start slipping after time t. For the critical condition, the frictional force provides the centripetal force: mω2L = μR = μm × at = μmLα. With ω = αt: m(αt)2L = μmLα, so t = √(μ/α).

Teacher's Note: Normal force from the rod supplies tangential acceleration mLα; friction limit μmLα equals mω2L.

Exam Note: Use ω = αt and equate limiting friction to centripetal force.

Question 185. A smooth table is placed horizontally and an ideal spring of spring constant k = 1000 N/m and unextended length of 0.5 m has one end fixed to its centre. The other end is attached to a mass of 5 kg which is moving in a circle with constant speed 20 m/s. Then the tension in the spring and the extension of this spring beyond its normal length are (a) 500 N, 0.5 m (b) 600 N, 0.6 m (c) 700 N, 0.7 m (d) 800 N, 0.8 m

Solution. Corrected: the printed answer (a) 500 N, 0.5 m does not satisfy the equation. Restoring force kx = mv2/r = mv2/(l + x): 1000x = 5(20)2/(0.5 + x), i.e. x(0.5 + x) = 2, or x2 + 0.5x - 2 = 0, giving x = (-0.5 + √8.25)/2 ≈ 1.19 m and tension = kx ≈ 1186 N. (Check: with x = 0.5 m the left side is 500 N while mv2/r = 2000/1 = 2000 N.) None of the given options matches; the book marks (a) with x = 0.5 m, T = 500 N.

Teacher's Note: Circle radius is l + x; solving the quadratic gives x ≈ 1.19 m, so no option fits.

Exam Note: Solve the quadratic; do not guess x.

Question 186. A particle describes a horizontal circle at the mouth of a funnel type vessel as shown in figure. The surface of the funnel is frictionless. The velocity v of the particle in terms of r and θ will be (a) v = √(rg/tan θ) (b) v = √(rg tan θ) (c) v = √(rg cot θ) (d) v = √(rg/cot θ). (Figure: a conical funnel with its axis vertical; θ is the semi-vertical angle of the cone, r the radius of the circle.)

Solution. (c). For uniform circular motion of a particle mv2/r = R cos θ ...(i) and mg = R sin θ ...(ii). Dividing (i) by (ii): v2/rg = cot θ, so v = √(rg cot θ).

Teacher's Note: Normal reaction R on the cone surface: its horizontal part gives centripetal force, vertical part balances weight.

Exam Note: Divide the two equations so R and m cancel.

Question 187. Figure shows a smooth track, a part of which is a circle of radius R. A block of mass m is pushed against a spring of spring constant k fixed at the left end and is then released. Find the initial compression of the spring so that the block presses the track with a force mg when it reaches the point P [see Fig], where the radius of the track is horizontal. (a) √(mgR/3k) (b) √(3gR/mk) (c) √(3mgR/k) (d) √(3mg/kR). (Figure: a spring attached to a wall on a horizontal smooth track; the block m lies against the spring and the track then curves up into a circle of radius R, with P at the point level with the centre.)

Solution. (c). For the given condition, the centripetal force at P should be equal to mg, i.e. mvP2/R = mg, so vP = √(Rg). The velocity at the lowest point L of the circular track: vP2 = vL2 - 2gR, so vL = √(vP2 + 2gR) = √(Rg + 2gR) = √(3gR). The block should possess kinetic energy (1/2)mvL2 = (1/2)m × 3gR. By conservation of energy (1/2)kx2 = (1/2)(3m × gR), so x = √(3mgR/k).

Teacher's Note: At P the normal force is the only radial force, so N = mv2/R = mg; then use energy conservation.

Exam Note: Spring energy equals KE at the bottom; P is R above it.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Access Class 11 Mathematics Solutions

Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Physics Chapter 10 Motion In Two Dimension Part 2 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 11 Math

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Physics?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.