Download JEE Chemistry P Bahadur Textbook Solutions: Chapter 01 Gaseous State
Review structured textbook solutions for JEE Chemistry Chapter 01 Gaseous State prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Access P Bahadur Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Gaseous State - Numerical Problems 1-102
Numerical Problems
Question 1. A gas occupies 300 mL at 27°C and 730 mm pressure. What would be its volume at STP?
Solution. Initially V2 = 300/1000 L, P2 = 730/760 atm, T2 = 300 K. At STP: V1 = ?, P1 = 1 atm, T1 = 273 K. Using P2V2/T2 = P1V1/T1: V1 = 0.2622 L. Volume at STP = 262.2 mL.
Teacher's Note: Combined gas law; temperatures must be in kelvin and pressure converted to atm.
Exam Note: Convert °C to K first; state STP values.
Question 2. A gas at 0°C and 1 atm pressure occupies 2.5 litre. What change in temperature would be necessary if the pressure is to be adjusted to 1.5 atm and the gas has been transferred to a 2.0 litre container?
Solution. P1 = 1 atm, V1 = 2.5 L, T1 = 273 K; P2 = 1.5 atm, V2 = 2.0 L, T2 = ?. Using P1V1/T1 = P2V2/T2: T2 = 327.6 K or 54.6°C. (Temperature must be raised by 54.6°C.)
Teacher's Note: Combined gas law gives the final temperature; the change is T2 − T1.
Exam Note: Give the change (rise of 54.6°C), not only T2.
Question 3. Calculate the volume occupied by 7 g N2 at 27°C and 750 mm of Hg.
Solution. w = 7 g, T = 300 K, P = 750/760 atm, M = 28 g mol−1. PV = (w/M)RT (R = 0.0821 L atm K−1 mol−1) gives V = 6.239 litre.
Teacher's Note: Ideal gas equation PV = (w/M)RT with R in L atm units, so pressure goes in atm.
Exam Note: Write moles = 7/28 before substituting.
Question 4. A container having 3 mole of gas occupies 60 litre at pressure P and T. If 0.01 mole of gas are introduced at same P and T, what will be the change in volume?
Solution. V ∝ n, so V = kn: 60 = k × 3, k = 20.0. ΔV = k·Δn = 20 × 0.01 = 0.2 litre. Corrected: the book prints ΔV = 20 × 0.1 = 2 litre, which is an arithmetic slip; with Δn = 0.01 mol the change is 0.2 litre.
Teacher's Note: Avogadro's law at constant P and T: volume is proportional to moles.
Exam Note: Use Δn = 0.01 exactly; watch the decimal place.
Question 5. Calculate the mass of CH4 in a 9 litre cylinder at 16 atm and 27°C. (R = 0.08 L atm K−1)
Solution. P = 16 atm, V = 9 L, T = 300 K, M = 16. From PV = (w/M)RT: w = PVM/RT = (16 × 9 × 16)/(0.08 × 300) = 96 g.
Teacher's Note: Ideal gas equation solved for mass; use the R value the question supplies (0.08).
Exam Note: Use R = 0.08 as given, not 0.0821.
Question 6. 3.7 g of a gas at 25°C occupy the same volume as 0.184 g H2 at 17°C at same pressure. What is the molar mass of gas?
Solution. For H2: w = 0.184 g, T = 290 K, pressure P, volume V: PV = (0.184/2) × R × 290 ...(1). For the gas: w = 3.7 g, T = 298 K: PV = (3.7/M) × R × 298 ...(2). From (1) and (2): M = 41.326 g mol−1.
Teacher's Note: Same P and V means equal PV; equate the two gas equations to eliminate P and V.
Exam Note: Equate PV for both gases and cancel R.
Question 7. 5 g of ethane are confined in a bulb of 1 litre capacity. The bulb is so weak that it will burst if the pressure exceeds 10 atm. At what temperature will the pressure of gas reach the bursting value?
Solution. w = 5 g, M = 30 (C2H6), V = 1 L. Let the bulb burst at T K when P = 10 atm: 10 × 1 = (5/30) × 0.0821 × T, so T = 730.81 K = 457.81°C.
Teacher's Note: Constant volume: pressure rises with T, so find T when P reaches the bursting value.
Exam Note: Molar mass of ethane is 30; report kelvin and °C.
Question 8. In Victor Meyer's experiment, 0.23 g of a volatile solute displaced air which measures 112 mL at NTP. Calculate the vapour density and molar mass of substance.
Solution. Volume of air displaced at NTP = volume occupied by the solute vapour at NTP = 112 mL. For the volatile solute PV = (w/M)RT with P = 1 atm, T = 273 K: 1 × 112/1000 = (0.23/M) × 0.0821 × 273, so M = 46.02 g mol−1 and V.D. = M/2 = 23.01.
Teacher's Note: Victor Meyer method: volume of air displaced equals volume of vapour; vapour density is M/2.
Exam Note: Give both M and V.D.; V.D. = M/2.
Question 9. What should be the percentage increase in pressure for a 5% decrease in volume of a gas at constant temperature?
Solution. P1 = P, V1 = V, T1 = T; P2 = ?, V2 = V − 5V/100 = 0.95V, T2 = T. Boyle's law: P × V = P2 × 0.95V, so P2 = (100/95)P = 1.0526P. Increase in pressure = 0.0526P, i.e. 5.26%.
Teacher's Note: Boyle's law: a 5% volume drop raises pressure by more than 5% (1/0.95).
Exam Note: Answer is 5.26%, relative to original P.
Question 10. O2 is present in one litre flask at a pressure of 7.6 × 10−10 mm of Hg. Calculate no. of O2 molecules at 0°C.
Solution. P = 7.6 × 10−10 mm = 7.6 × 10−10/760 atm = 10−12 atm, V = 1 L, T = 273 K. PV = nRT gives n = 4.46 × 10−14 mol. Number of O2 molecules = 4.46 × 10−14 × 6.023 × 1023 = 2.68 × 1010.
Teacher's Note: Find moles from PV = nRT, then multiply by Avogadro's number.
Exam Note: Convert mm Hg to atm before using R = 0.0821.
Question 11. The pressure of the atmosphere is 2 × 10−6 mm at about 100 mile above the earth and temperature is −180°C. How many mole are there in 1 mL gas at this altitude?
Solution. P = 2 × 10−6/760 atm, T = −180 + 273 = 93 K, V = 1 mL = 1/1000 L. PV = nRT: (2 × 10−6/760) × 10−3 = n × 0.0821 × 93, so n = 3.45 × 10−13 mol.
Teacher's Note: Ideal gas equation at very low pressure; convert mL to L and °C to K.
Exam Note: Show unit conversions: mm to atm, mL to L, °C to K.
Question 12. A 1.5 litre sample of a gas having density 1.25 kg/m3 at 1.0 atm and 0°C was compressed to 575 atm resulting in a gas volume of 3.92 cm3 in violation of Boyle's law. What is the final density of this gas?
Solution. Mass of gas in 1.5 L = 1.25 kg m−3 × 1.5 × 10−3 m3 = 1.875 × 10−3 kg. New density = mass/new volume = (1.25 × 1.5 × 10−3 kg)/(3.92 × 10−6 m3) = 478.3 kg m−3.
Teacher's Note: Mass is conserved on compression; density is mass over the new volume.
Exam Note: Convert cm3 and L to m3 consistently.
Question 13. The pressure exerted by 12 g of an ideal gas at temperature t°C in a vessel of volume V litre is one atm. When the temperature is increased by 10 degree at same volume, the pressure increases by 10%. Calculate the temperature t and volume V. (Molar mass of gas = 120) (IIT 1999)
Solution. Case I: P = 1 atm, w = 12 g, T = (t + 273) K, V = V L. Case II: T = (t + 283), P = 1 + 10/100 = 1.1 atm, same w and V. Gas equation: 1 × V = (12/M)R(t + 273) ...(1); 1.1 × V = (12/M)R(t + 283) ...(2). Dividing: 1.1/1 = (t + 283)/(t + 273), so 1.1t + 300.3 = t + 283, 0.1t = −17.3, t = −173°C = 100 K. From Case I: 1 × V = (12/120) × 0.082 × 100, so V = 0.82 litre and t = −173°C.
Teacher's Note: Constant V: P2/P1 = T2/T1 fixes t; then PV = nRT gives V.
Exam Note: Use T = t + 273, t + 283; 1.1 atm.
Question 14. An iron cylinder contains helium at a pressure of 250 kPa at 300 K. The cylinder can withstand a pressure of 1 × 106 Pa. The room in which cylinder is placed catches fire. Predict whether the cylinder will blow up before it melts or not; melting point of cylinder = 1800 K.
Solution. P1 = 250 kPa, T1 = 300 K; P2 = 1 × 106 Pa, T2 = ?. Volume of cylinder is constant, so P1/T1 = P2/T2: 250 × 103/300 = 1 × 106/T2, T2 = 1200 K. The cylinder will blow up at 1200 K, before its melting point (1800 K).
Teacher's Note: Constant volume (Gay-Lussac): find T at which pressure reaches the limit and compare with melting point.
Exam Note: State the conclusion: bursts at 1200 K < 1800 K.
Question 15. A volume of 95 mL N2O at 27°C is collected over mercury, the level of Hg inside the tube being 60 mm above the outside mercury level when barometer reads 750 mm. (a) Calculate the volume of the same mass at STP. (b) What volume would the same mass of gas occupy at 40°C when the barometric pressure is 745 mm and the level of Hg inside the tube is 25 mm below the outside level?
Solution. (a) V1 = 95 mL = 95/1000 L, T1 = 300 K, P1 = 750 − 60 = 690 mm = 690/760 atm. At STP: V2 = ?, T2 = 273 K, P2 = 760/760 = 1 atm. From P1V1/T1 = P2V2/T2: V2 = 0.07848 L = 78.48 mL. (b) V2 = ?, T2 = 313 K, P2 = 745 + 25 = 770 mm = 770/760 atm. (690 × 95)/(760 × 300 × 1000) = (770 × V2)/(760 × 313), so V2 = 0.0888 L = 88.8 mL.
Teacher's Note: Gas over mercury: if Hg inside is higher, subtract the difference from barometer; if lower, add it.
Exam Note: Check the sign of the mercury-level correction.
Question 16. An LPG (liquified petroleum gas) cylinder weighs 14.8 kg when empty, when full, it masses 29.0 kg and shows a pressure of 2.5 atm. In the course of use at 27°C, the mass of full cylinder is reduced to 23.2 kg. Find out the volume of the gas in cubic metres used up at the normal usage conditions and the final pressure inside the cylinder. Assume LPG to be n-butane with normal boiling point of 0°C. (IIT 1994)
Solution. Mass of butane in the full cylinder = 29.0 − 14.8 = 14.2 kg = 14.2 × 103 g; P = 2.5 atm, T = 300 K, M = 58. PV = (w/M)RT: 2.5 × V = (14.2 × 103/58) × 0.0821 × 300, so V = 2.4 × 103 litre (volume of the cylinder). Mass left after use = 23.2 − 14.8 = 8.4 kg: P × 2.412 × 103 = (8.4 × 103/58) × 0.0821 × 300, so final pressure = 1.48 atm. Gas used = 29.0 − 23.2 = 5.8 kg: under normal conditions (1 atm, 300 K) 1 × V = (5.8 × 103/58) × 0.0821 × 300, so V = 2.46 × 103 L = 2.46 m3. Corrected: the book prints 1.50 atm and 2.4 m3 (rounded); the calculation gives 1.48 atm and 2.46 m3.
Teacher's Note: Cylinder volume is fixed; mass left gives final pressure, mass used gives volume at 1 atm.
Exam Note: Weigh masses by difference; use 1 atm for 'normal' usage.
Question 17. A balloon blown up with 1 mole of gas has a volume of 480 mL at 5°C. The balloon is filled to (7/8)th of its maximum capacity. Suggest, (a) Will the balloon burst at 30°C? (b) The minimum temperature at which it will burst. (c) The pressure of gas inside the balloon at 5°C. (d) The pressure of gas when balloon bursts.
Solution. Maximum volume of balloon = (8/7) × 480 = 548.57 mL; V1 = 480 mL, T1 = 278 K, n = 1 mol. (a) Charles' law: 480/278 = 548.57/T2, T2 = 317.71 K = 44.71°C. Thus the balloon will not burst at 30°C. (b) Minimum temperature at which the balloon bursts = 44.71°C. (c) At 5°C with 1 mole and V = 480 mL: P × 480/1000 = 1 × 0.0821 × 278, P = 47.5 atm. (d) Volume increases with temperature up to 44.71°C, where the balloon bursts, while pressure stays constant; the pressure when it bursts is 47.5 atm.
Teacher's Note: Elastic balloon at constant pressure: Charles' law gives the bursting temperature at maximum volume.
Exam Note: Say pressure is constant, so (d) equals (c).
Question 18. 0.553 g of boron-hydrogen compound created a pressure of 0.658 atm in a bulb of 407 mL at 100°C. Analysis showed it to be 85.7% boron. Calculate its molecular formula.
Solution. P = 0.658 atm, V = 407/1000 L, T = 373 K, w = 0.553 g. PV = (w/M)RT: 0.658 × 407/1000 = (0.553/M) × 0.0821 × 373, so M = 63.23 g mol−1. 63.23 g of compound contains (85.7 × 63.23)/100 = 54.19 g B = 54.19/10.8 = 5 g-atoms of B. Formula is B5Hx: 5 × 10.8 + x = 63.25, x = 9.25 ≈ 9. The formula of the compound is B5H9.
Teacher's Note: Molar mass from the gas equation, then atoms of B from % composition; the remainder is hydrogen.
Exam Note: Round H to a whole number: 9.25 gives 9.
Question 19. 1.47 litre of a gas is collected over water at 30°C and 744 mm of Hg. If the gas weighs 1.98 g and vapour pressure of water at 30°C is 32 mm, what is the molar mass of gas?
Solution. w = 1.98 g, V = 1.47 L, T = 303 K. Pressure of dry gas = 744 − 32 = 712 mm = 712/760 atm. For the dry gas PV = (w/M)RT: (712/760) × 1.47 = (1.98/M) × 0.0821 × 303, so M = 35.76 g mol−1.
Teacher's Note: Gas collected over water: subtract aqueous tension from total pressure (Dalton's law).
Exam Note: Subtract the vapour pressure of water first.
Question 20. Calculate the density of CO2 at 100°C and 800 mm Hg pressure.
Solution. P = 800/760 atm, T = 273 + 100 = 373 K. Let the density of CO2 be d. PV = (w/M)RT gives P = (d/M)RT, so 800/760 = (d/44) × 0.0821 × 373, d = 1.5124 g litre−1.
Teacher's Note: Density form of the gas law: d = PM/RT, with M = 44 for CO2.
Exam Note: Use d = PM/RT directly; pressure in atm.
Question 21. A mixture of CO and CO2 is found to have a density of 1.50 g/litre at 30°C and 730 mm. What is composition of mixture?
Solution. d = 1.50 g litre−1, P = 730/760 atm, T = 303 K. From P = (d/M)RT: 730/760 = (1.50/M) × 0.0821 × 303, so M = 38.85 g mol−1, i.e. molar mass of the mixture of CO and CO2 = 38.85. Let mole % of CO be a. Average molar mass = [a × 28 + (100 − a) × 44]/100 = 38.85, so a = 32.19. Mole % of CO = 32.19; mole % of CO2 = 67.81.
Teacher's Note: Average molar mass from density, then mole fractions by weighted average of 28 and 44.
Exam Note: Average molar mass weighted by mole fractions, not by mass.
Question 22. A spherical balloon of 21 cm diameter is to be filled up with H2 at NTP from a cylinder containing the gas at 20 atm at 27°C. The cylinder can hold 2.82 litre of water at NTP. Calculate the number of balloons that can be filled up.
Solution. Volume of one balloon = (4/3)π(21/2)3 = 4851 mL = 4.851 L. Let n balloons be filled. Volume of H2 occupied by balloons = 4.851n L; the cylinder is not empty and will still occupy 2.82 L of H2 (at 1 atm). So total volume of H2 at NTP = (4.851n + 2.82) L. Gas available at STP: P1 = 1 atm, V1 = 4.851n + 2.82, T1 = 273 K; initial: P2 = 20 atm, V2 = 2.82 L, T2 = 300 K. From P1V1/T1 = P2V2/T2: (4.851n + 2.82)/273 = (20 × 2.82)/300, so n = 10 balloons.
Teacher's Note: The cylinder keeps 2.82 L of gas at 1 atm, so it cannot all go into balloons.
Exam Note: Subtract residual gas in the cylinder at 1 atm.
Question 23. A balloon of diameter 20 metre weighs 100 kg. Calculate its payload, if it is filled with He at 1.0 atm and 27°C. Density of air is 1.2 kg m−3. [R = 0.082 dm3 atm K−1 mol−1] (Roorkee 1994)
Solution. Mass of balloon = 100 kg = 10 × 104 g. Volume of balloon = (4/3)πr3 = (4/3)(22/7)(20 × 100/2)3 cm3 = 4190 × 106 cm3 = 4190 × 103 litre. Mass of He = PVM/RT = (1 × 4190 × 103 × 4)/(0.082 × 300) = 68.13 × 104 g. Total mass of gas and balloon = 68.13 × 104 + 10 × 104 = 78.13 × 104 g. Mass of air displaced = 1.2 × 4190 × 106/103 = 502.8 × 104 g. Payload = mass of air displaced − (mass of balloon + mass of gas) = 502.8 × 104 − 78.13 × 104 = 424.67 × 104 g (≈ 4247 kg).
Teacher's Note: Payload = weight of displaced air minus balloon and helium (buoyancy).
Exam Note: Subtract both balloon and gas mass from air displaced.
Question 24. The mass of 350 mL of a diatomic gas at 0°C and 2 atm is 1 g. Calculate the mass in g of one atom.
Solution. V = 350 mL, P = 2 atm, T = 273 K, w = 1 g. PV = (w/m)RT: 2 × 350/1000 = (1/m) × 0.0821 × 273, so molar mass of the gas = 32.02. Atomic mass = 32.02/2 = 16.01 (diatomic gas). Mass of 1 atom = 16.01/(6.023 × 1023) = 2.66 × 10−23 g.
Teacher's Note: Diatomic gas: atomic mass is half the molar mass; divide by Avogadro's number for one atom.
Exam Note: Halve the molar mass for a diatomic gas.
Question 25. A flask is of a capacity of one litre. What volume of air will escape from the flask if it is heated from 27°C to 37°C? Assume pressure is constant.
Solution. T = 27°C = 300 K, T1 = 37°C = 310 K, V = 1 litre, V1 = ?. At constant pressure V/T = V1/T1: 1/300 = V1/310, V1 = 310/300 = 1.0333 litre. Since the capacity of the flask is 1 litre, volume of air escaped = 1.0333 − 1 = 0.0333 litre = 33.3 mL.
Teacher's Note: Charles' law: the extra volume at the higher temperature is what escapes from the open flask.
Exam Note: Escaped volume is the excess over the flask capacity.
Question 26. A student forgot to add the reaction mixture to the round bottomed flask at 27°C but put it on the flame. After a lapse of time, he realised his mistake. Using a pyrometer he found that the temperature of the flask was 477°C. What fraction of air would have been expelled out? (Roorkee 1996)
Solution. At T1 = 300 K, mole of air = n1; at T2 = 750 K, mole of air = n2. At constant P, V: n1T1 = n2T2, so n1 × 300 = n2 × 750, n2 = (300/750)n1 = 0.4n1. Mole of air escaped = n1 − n2 = n1 − 0.4n1 = 0.6n1. Fraction of air escaped = 0.6.
Teacher's Note: Open flask at fixed P and V: n ∝ 1/T, so moles left fall as T rises.
Exam Note: Convert 477°C to 750 K before taking the ratio.
Question 27. An open flask contains air at 27°C. Calculate the temperature at which (a) 1/3 rd of air measured at 27°C escapes out. (b) 1/3 rd of air measured at final temperature escapes out.
Solution. (a) Initial temperature = 300 K. Let number of mole at 300 K = n. Mole coming out at T K = n/3, so mole left at T K = n − n/3 = 2n/3. Under constant P and V, n1T1 = n2T2: n × 300 = (2/3)n × T, so T = 450 K = 177°C. (b) Initial temperature = 300 K; new temperature T K. Let number of mole present at T K = n. Mole coming out at T K = n/3, so number of mole at 300 K should be n + n/3 = 4n/3. Then (4n/3) × 300 = n × T, T = 400 K = 127°C.
Teacher's Note: The two cases differ in the temperature at which the escaped fraction is measured.
Exam Note: Part (b) measures the escaped fraction at the final temperature.
Question 28. 20% N2O4 molecules are dissociated in a sample of gas at 27°C and 760 torr. Calculate the density of the equilibrium mixture. [Roorkee 1996]
Solution. N2O4 ⇌ 2NO2. Mole present initially: 1 and 0; at equilibrium: (1 − 0.2) = 0.8 and 0.4. Molar mass of mixture = (0.8 × 92 + 0.4 × 46)/1.2 = 76.66. Now PV = (w/M)RT gives w/V = PM/RT = (76.66 × 1)/(0.082 × 300) = 3.116 g litre−1.
Teacher's Note: Dissociation: total moles become 1.2; density = PMavg/RT with average molar mass.
Exam Note: Average molar mass uses total moles 1.2, not 1.
Question 29. Two flasks of equal volume connected by a narrow tube (of negligible volume) are at 27°C and contain 0.70 mole of H2 at 0.5 atm. One of the flask is then immersed into a bath kept at 127°C, while the other remains at 27°C. Calculate the final pressure and the number of mole of H2 in each flask.
Solution. The two flasks initially at 27°C have the same volume and 0.7 mole; thus each flask has 0.35 mol. Let n mole of gas be diffused from flask II to flask I on heating II to 127°C. Mole in flask I = (0.35 + n); mole in flask II = (0.35 − n). If the new pressure is P, then for I: Pnew × V = (0.35 + n) × R × 300; for II: Pnew × V = (0.35 − n) × R × 400. Hence n = 0.05. Mole in flask I = 0.35 + 0.05 = 0.40; mole in flask II = 0.35 − 0.05 = 0.30. Also, 0.5 × 2V = 0.7 × 0.0821 × 300 (initial condition) gives V = 17.241 litre. Thus Pnew × 17.241 = 0.30 × 0.0821 × 400, so P = 0.5714 atm.
Teacher's Note: Pressure equalises between flasks, so the hotter flask holds fewer moles.
Exam Note: Equal final P and V gives n1T1 = n2T2.
Question 30. A vessel contains 7.1 g chlorine gas at pressure P and temperature T K. On heating the temperature to 30° higher temperature, 246 mL of chlorine at 1 atm and 27°C is taken out to maintain same pressure in vessel. Calculate: (a) the original temperature, (b) if the gas is not allowed to escape out, the pressure increases by 0.11 atm. Calculate the volume of vessel and initial pressure.
Solution. (a) Mole of gas coming out on heating n = PV/RT = (1 × 0.246)/(0.0821 × 300) = 0.009987. Mole of gas left = 7.1/71 − 0.009987 = 0.1 − 0.009987 = 0.09. For 0.1 mole of gas: PV = 0.1RT ...(1); for 0.09 mole of gas: PV = 0.09R(T + 30) ...(2). By Eqs. (1) and (2): T = 270 K. (b) If the gas is not allowed to escape, then for 0.1 mole: P × V = 0.10 × R × 270 ...(3); (P + 0.11)V = 0.10 × R × 300 ...(4). By Eqs. (3) and (4): P = 0.99 atm. From Eq. (3): 0.99 × V = 0.10 × R × 270, V = 2.239 litre. Corrected: the book prints 303 in Eq. (4); the final temperature is 270 + 30 = 300 K. The printed answers (0.99 atm, 2.239 L) agree with 300 K.
Teacher's Note: Equate PV before and after heating (same P, V) to get the original temperature.
Exam Note: Final temperature is T + 30, so 300 K here.
Question 31. A car tyre has a volume of 10 litre when inflated. The tyre is inflated to a pressure of 3 atm at 17°C with air. Due to driving the temperature of tyre increases to 47°C. (a) What would be the pressure at this temperature? (b) How many litre of air measured at 47°C and pressure of 1 atm should be let out to restore the tyre to 3 atm at 47°C?
Solution. Given V = 10 litre, P = 3 atm, T = 290 K. (a) After driving V = 10 litre, P = ?, T = 320 K. At constant volume of tyre P1/P2 = T1/T2: 3/P = 290/320, P = 3.31 atm. (b) At 47°C the volume to be taken out is such that the tyre is left at a pressure of 3 atm, i.e. decrease in pressure = 3.31 − 3.0 = 0.31 atm. At 0.31 atm the volume of air is 10 litre; therefore at 1 atm this air will occupy V litre: P1V1 = P2V2 (temperature is 47°C), 0.31 × 10 = 1 × V2, V2 = 3.1 litre.
Teacher's Note: Constant-volume heating raises P; the excess, converted to 1 atm, is the volume let out.
Exam Note: Excess 0.31 atm at 10 L becomes 3.1 L at 1 atm.
Question 32. A gas filled freely collapsible balloon is pushed from the surface level of lake to a depth of 100 meter. Calculate what per cent of its original volume, the balloon finally has. Assume ideal gas nature.
Solution. Pressure at 100 metre depth = atmospheric pressure + pressure of water = 76 × 13.6 × 981 + 100 × 100 × 1 × 981 = 1013961.6 + 9810000 = 10823961.6 dyne cm−2. Let the volume of the balloon at the surface be Vi cm3 and at the depth of 100 m be Vf. PiVi = PfVf: Vf = (76 × 13.6 × 981/10823961.6) × Vi = 0.0937Vi, so Vf = 9.37% of Vi.
Teacher's Note: Boyle's law with total pressure = atmosphere + water column (ρgh) in the same units.
Exam Note: Add atmospheric pressure to the water column pressure.
Question 33. Two glass bulbs of equal volumes are connected by a narrow tube and filled with a gas at 0°C and pressure of 76 cm of Hg. One of the bulb is then placed in a water bath maintained at 62°C. What is the new value of the pressure inside the bulbs? The volume of the connecting tube is negligible.
Solution. Initially when both bulbs are at 273 K, the mole in each bulb = (total mole)/2 = P·2V/(2RT) = PV/RT = 76V/(R × 273) ...(1). On heating bulb II, some mole of gas are transferred to bulb I till the pressure in the two bulbs becomes the same. For bulb I: n1 = P1V/(R × 273); for bulb II: n2 = P2V/(R × 335). Since n = n1 + n2: (76V/(R × 273)) × 2 = P1V/(R × 273) + P2V/(R × 335), and P1 = P2, so P1 = 83.75 cm of Hg.
Teacher's Note: Total moles are conserved while pressure equalises across bulbs at different temperatures.
Exam Note: Write n = n1 + n2 with a common P.
Question 34. Two glass bulbs of internal volumes 0.5 and 0.2 litre are connected by a narrow tube of negligible volume. The pressure of air in the vessel is 75 cm at 17°C. The smaller bulb is immersed in melting ice and the larger bulb in boiling water. Calculate final pressure in the bulbs neglecting the expansion of glass.
Solution. Initial mole of air present = PV/RT = (75 × 0.7)/(76 × 0.0821 × 290) = 0.029 (V = 0.2 + 0.5 = 0.7 litre). Now let n2 mole be present in the boiling water vessel (0.5 L, 373 K) and n1 mole in the melting ice vessel (0.2 L, 273 K): n = 0.029 = n1 + n2 = P × 0.2/(0.0821 × 273) + P × 0.5/(0.0821 × 373) (P remains the same at equilibrium). So P = 0.029/(8.92 × 10−3 + 16.33 × 10−3) = 1.15 atm = 87.4 cm of Hg (rounding; the unrounded value is 87.3 cm).
Teacher's Note: Total moles conserved; pressure equalises while the two bulbs sit at different temperatures.
Exam Note: Smaller bulb at 273 K, larger at 373 K.
Question 35. The volume of the average adult lung when expanded is about 6 litre at 98.4°F, if the pressure of oxygen in inhaled air is 168 mm of Hg, calculate the mass of O2 required to occupy the lung at 98.4°F.
Solution. 98.4°F in °C: (F − 32)/9 = C/5, (98.4 − 32)/9 = C/5, so C = 36.88°C or 309.88 K. Using PV = (w/M)RT: (168/760) × 6 = (w/32) × 0.0821 × 309.88, so w = 1.67 g.
Teacher's Note: Convert °F to K, mm Hg to atm, then use PV = (w/M)RT with M = 32 for O2.
Exam Note: Convert °F through °C to kelvin first.
Question 36. Two gas containers with volumes 0.1 L and 1 L respectively are connected by a tube of negligible volume and contains air at a pressure of 1000 mm of Hg at 0°C. If the temperature of smaller container is raised to 100°C, what volume of air measured at 0°C and 760 mm of Hg will pass from it to a larger container.
Solution. Mole present initially in 1 L container: n1 = PV/RT = (1000 × 1)/(760 × 0.0821 × 273) = 5.87 × 10−2. Mole present initially in 0.1 L container: n2 = (1000 × 0.1)/(760 × 0.0821 × 273) = 5.87 × 10−3. So total n1 + n2 = 5.87 × 10−2 + 5.87 × 10−3 = 6.46 × 10−2. Also, on heating the vessel of 0.1 L to 373 K, let n mole remain in it; since the pressure will remain the same, nRT/V is constant in both: (n × 373)/0.1 = ((6.46 × 10−2 − n) × 273)/1, so n = 4.40 × 10−3, i.e. mole left in the 0.1 litre container after heating = 4.40 × 10−3. Mole moved from 0.1 L to the 1 L vessel = 5.87 × 10−3 − 4.40 × 10−3 = 1.47 × 10−3. Volume of air moved at 0°C and 760 mm: V = nRT/P = (1.47 × 10−3 × 0.0821 × 273)/1 = 32.9 mL.
Teacher's Note: Equal final pressure in both vessels, so n/(V/T)-type balance fixes the moles left in the hot vessel.
Exam Note: Compare moles moved, then convert to volume at STP.
Question 37. A 2 litre flask of N2 at 20°C and 70 cm P is connected with a 3 litre of another flask of O2 at the same temperature and 100 cm P. What will be the final pressure after the gases have thoroughly mixed at same temperature as before? Also calculate the mole % of each gas in the resulting mixture. The volume of stop cock may be neglected.
Solution. I flask: V = 2 litre, PN2 = 70 cm, T = 293 K. II flask: V = 3 litre, PO2 = 100 cm, T = 293 K. Before mixing: mole of N2 = PV/RT = (70 × 2)/(76 × 0.0821 × 293) = 7.658 × 10−2; mole of O2 = (100 × 3)/(76 × 0.0821 × 293) = 16.41 × 10−2. After mixing total volume becomes 5 litre. P′N2 = nRT/V = (7.658 × 10−2 × 0.0821 × 293)/5 = 0.368 atm; P′O2 = (16.41 × 10−2 × 0.0821 × 293)/5 = 0.79 atm. PM = 0.368 + 0.79 = 1.158 atm. Mole % of N2 = 7.658 × 10−2/(7.658 + 16.41) × 10−2 × 100 = 31.8%; mole % of O2 = 68.2%.
Teacher's Note: Each gas expands into the combined volume independently; total pressure is the sum of partial pressures.
Exam Note: Use the 5 L total volume for each partial pressure.
Question 38. Calculate the total pressure in a 10 litre cylinder which contains 0.4 g of helium, 1.6 g of oxygen and 1.4 g of nitrogen at 27°C. Also calculate the partial pressure of helium gas in the cylinder. Assume ideal behaviour of gases. Given, R = 0.082 litre-atm K−1 mol−1. (Roorkee 1997)
Solution. V = 10 litre, T = 27 + 273 = 300 K. Mole of He = 0.4/4 = 0.10; mole of O2 = 1.6/32 = 0.05; mole of N2 = 1.4/28 = 0.05. Total mole = 0.10 + 0.05 + 0.05 = 0.20. PM = nRT/V = (0.20 × 0.082 × 300)/10 = 0.492 atm. P′He = PM × mole fraction of He = 0.492 × 0.10/0.20 = 0.246 atm. (Also P′O2 = 0.123 atm, P′N2 = 0.123 atm.)
Teacher's Note: Dalton's law: total moles give total pressure; partial pressure equals mole fraction times total.
Exam Note: Convert each mass to moles using its own molar mass.
Question 39. Equal masses of CH4 and O2 are mixed in an empty container of one litre at 27°C. Calculate the: (a) fraction of total pressure exerted by O2. (b) total pressure if the masses of gases are 32 g each.
Solution. Mass of CH4 = mass of O2 = w g, V = 1 litre, T = 300 K. (a) Mole fraction of CH4 = (w/16)/(w/16 + w/32) = 2/3; mole fraction of O2 = (w/32)/(w/16 + w/32) = 1/3. P′O2 = PM × mole fraction of O2 (Dalton's law), so P′O2/PM = 1/3. (b) P′CH4 × 1 = (32/16) × 0.0821 × 300 = 49.26 atm; P′O2 × 1 = (32/32) × 0.0821 × 300 = 24.63 atm. PM = 49.26 + 24.63 = 73.89 atm.
Teacher's Note: Equal masses give unequal moles: CH4 has twice the moles of O2.
Exam Note: Equal mass is not equal moles; use mole fractions.
Question 40. Two gases A and B having molar mass 60 and 45 respectively are enclosed in a vessel. The mass of A is 0.50 g and that of B is 0.2 g. The total pressure of the mixture is 750 mm. Calculate partial pressure of the two gases.
Solution. Mass of gas A = 0.50 g, molar mass of A = 60; mass of gas B = 0.2 g, molar mass of B = 45; PM = 750 mm. From Dalton's law of partial pressure: P′A = PM × mole fraction of A = 750 × (0.5/60)/((0.5/60) + (0.2/45)) = 489.23 mm. P′B = PM − P′A = 750 − 489.23 = 260.77 mm.
Teacher's Note: Partial pressure equals mole fraction times total pressure; moles come from mass/molar mass.
Exam Note: Convert masses to moles before taking the fraction.
Question 41. A 20 g chunk of dry ice is placed in an empty 0.75 litre wine bottle tightly closed. What would be the final pressure in the bottle after all CO2 has been evaporated and temperature reaches to 25°C?
Solution. w = 20 g dry CO2 which will evaporate to develop P. M = 44 g mol−1, V = 0.75 litre, P = ?, T = 298 K. PV = (w/M)RT: P × 0.75 = (20/44) × 0.0821 × 298, so P = 14.828 atm. NOTE (book): pressure inside the bottle = P + atm. pressure = 14.828 + 1 = 15.828 atm (if the bottle already held air at 1 atm).
Teacher's Note: Solid CO2 sublimes completely; the gas equation gives the pressure it alone exerts.
Exam Note: Mention the extra 1 atm if air is already present.
Question 42. A gaseous mixture of O2 and N2 are in the ratio of 1 : 4 by mass. Calculate their ratio of molecules.
Solution. Let mass of O2 = w1 and mass of N2 = w2. Given w1/w2 = 1/4. Mole of O2 = w1/32; mole of N2 = w2/28. Mole of O2/mole of N2 = (w1/32) × (28/w2) = (28/32) × (1/4) = 7/32. Ratio of molecules O2 : N2 = 7 : 32.
Teacher's Note: Number of molecules is proportional to moles, i.e. mass divided by molar mass.
Exam Note: Ratio by mass is not ratio by molecules; divide by molar mass.
Question 43. 50 litre of dry N2 is passed through 36 g H2O at 27°C. After passage of the gas, there is a loss of 1.20 g in water. Calculate vapour pressure of water.
Solution. The water vapours occupy the volume of N2 gas, i.e. 50 litre. For H2O vapour: V = 50 litre, w = 1.20 g, T = 300 K, m = 18. PV = (w/M)RT: P × 50 = (1.2/18) × 0.0821 × 300, P = 0.03284 atm = 24.95 mm.
Teacher's Note: Dry gas becomes saturated; the water lost fills the gas volume as vapour, giving its vapour pressure.
Exam Note: Vapour occupies the 50 L gas volume, not the liquid volume.
Question 44. O2 is collected over water at 20°C. The pressure inside shown by the gas is 740 mm of Hg. What is the pressure due to O2 alone if V.P. of H2O is 18 mm at 20°C?
Solution. According to Dalton's law of partial pressure, PM = 740 mm and PH2O = 18 mm. PM or Pwet O2 = PO2 + PH2O: 740 = PO2 + 18, so PO2 = 722 mm.
Teacher's Note: Gas collected over water: total pressure equals dry gas plus aqueous tension.
Exam Note: Subtract aqueous tension from total pressure.
Question 45. The density of a mixture of O2 and N2 at NTP is 1.3 g litre−1. Calculate partial pressure of O2.
Solution. Partial pressure of O2: P′O2 = Pm × mole fraction. Since Pm = 1 atm (NTP condition), P′O2 = 1 × mole fraction ...(1). For the mixture PV = (w/M)RT, so M = (w/VP)RT = (1.3 × 0.0821 × 273)/1 = 29.137 g mol−1 (w/V = 1.3 g L−1). If n1 and n2 are mole of O2 and N2 respectively: (32n1 + 28n2)/(n1 + n2) = 29.137, i.e. 28 + 4n1/(n1 + n2) = 29.137, so n1/(n1 + n2) = (29.137 − 28)/4 = 0.28. Mole fraction of O2 = 0.28. By Eq. (1): P′O2 = 0.28 atm.
Teacher's Note: Density gives average molar mass; mole fraction from the weighted average gives partial pressure.
Exam Note: Use NTP total pressure 1 atm.
Question 46. An evacuated glass vessel weighs 50.0 g when empty, 148.0 g when filled with a liquid of density 0.98 g mL−1 and 50.5 g when filled with an ideal gas at 760 mm Hg at 300 K. Determine the molar mass of the gas. (IIT 1998)
Solution. Mass of liquid = 148 − 50 = 98 g. Volume of liquid = 98/0.98 = 100 mL = volume of vessel. Thus a vessel of 100 mL contains ideal gas at 760 mm of Hg at 300 K. Mass of gas = 50.5 − 50 = 0.5 g. Using PV = nRT: (760/760) × (100/1000) = (0.5/m) × 0.0821 × 300, so molar mass of gas m = 123 g mol−1.
Teacher's Note: The liquid fills the vessel, so its mass and density give the vessel volume; then the gas law gives M.
Exam Note: Vessel volume from liquid mass ÷ density.
Question 47. A jar contains a gas and a few drops of water at T K. The pressure in the jar is 830 mm of Hg. The temperature of the jar is reduced by 1%. The vapour pressures of water at two temperatures are 30 and 25 mm of Hg. Calculate the new pressure in the jar.
Solution. At T K, Pgas = Pdry gas + Pmoisture, so Pdry gas = 830 − 30 = 800 mm. New temperature T1 = T − T/100 = 0.99T. Since V is constant, P/T = constant: Pdry gas = (800 × 0.99T)/T = 792 mm. Pgas = Pdry gas + Pmoisture = 792 + 25 = 817 mm of Hg.
Teacher's Note: Only the dry gas follows the P/T law; water vapour pressure changes with its own value at the new T.
Exam Note: Apply the T ratio to dry-gas pressure only.
Question 48. 2 g of a gas A are introduced into an evacuated flask kept at 25°C. The pressure is found to be 1 atm. If 3 g of another gas B are added to the same flask, the total pressure becomes 1.5 atm. Assuming ideal gas behaviour, calculate: (a) the ratio of molar masses of MA and MB. (b) the volume of the vessel, if A is O2.
Solution. Mass of gas A = 2 g, pressure of A = 1 atm, T = 298 K. Another gas B, mass 3 g, is introduced; pressure of mixture = 1.5 atm. From Dalton's law: PM = P′A + P′B, 1.5 = 1.0 + P′B, P′B = 0.5 atm. (a) For gas A: P′A × V = (2/MA)RT; for gas B: P′B × V = (3/MB)RT. So P′A/P′B = (2/3)(MB/MA), MA/MB = (2/3)(P′B/P′A) = (2/3)(0.5/1.0) = 1/3. (b) If A is O2, molar mass = 32: P′A × V = (2/32) × 0.0821 × 298, 1 × V = (2/32) × 0.0821 × 298, V = 1.529 litre.
Teacher's Note: At fixed V and T, the pressure each gas adds is proportional to its moles (w/M).
Exam Note: Added pressure from B is 0.5 atm, not 1.5.
Question 49. A long rectangular box is filled with Cl2 (at. mass 35.45) which is known to contain only Cl35 and Cl37. If the box could be divided by a partition and the two types of chlorine molecules put into the two compartments respectively, calculate, where should the partition be made if the pressure on both sides is to be equal. Is this pressure the same as the original pressure?
Solution. Average molar mass = (35n1 + 37n2)/(n1 + n2) = 35.45, where n1 and n2 are mole of Cl35 and Cl37 isotopes. Therefore n1/n2 = 3.44. Since PV1 = n1RT and PV2 = n2RT, V1/V2 = n1/n2. Volume ∝ mole, when other things are equal, and thus the partition should be made at the point where the ratio of lengths is 3.44 : 1. The pressure at this condition is the same as the original pressure (V, T, n per compartment keep P constant).
Teacher's Note: Isotope ratio from average atomic mass; equal P and T means volumes are in the mole ratio.
Exam Note: Weighted average gives n1/n2; volume ratio equals mole ratio.
Question 50. A narrow tube of uniform bore, closed at one end has some air entrapped by a small quantity of water. If the pressure of the atmosphere is 760 mm of Hg and vapour pressure of H2O at 12°C and 35°C are 10.5 mm Hg and 42 mm Hg respectively and the length of the air column is 10 cm at 12°C, what will be its length at 35°C?
Solution. At 285 K, Pwet air = 760 mm, so Pair = 760 − 10.5 = 749.5 mm Hg. At 308 K, Pwet air = 760 mm, so Pair = 760 − 42 = 718 mm Hg. Length of the air = 10 cm at 285 K; volume of the air = 10 × a (a = area of tube). Let h be the length of the air column at 308 K. Same moles of air: 718 × h × a = n × R × 308 and 749.5 × 10 × a = n × R × 285, so h = (308/285) × (749.5 × 10/718) = 11.28 cm.
Teacher's Note: Trapped dry air obeys P1V1/T1 = P2V2/T2 after subtracting water's vapour pressure.
Exam Note: Subtract vapour pressure at each temperature separately.
Question 51. Mercury diffusion pumps may be used in the laboratory to produce a high vacuum. Cold traps are generally placed between the pump and the system to be evacuated. These cause condensation of mercury vapours and prevent mercury from diffusing back into the system. The minimum pressure of mercury that can exist in the system is the vapour pressure of mercury at the temperature of cold trap. Calculate the number of mercury atom per unit volume in a cold trap at −120°C. The vapour pressure of mercury at this temperature is 10−16 torr.
Solution. Given P = 10−16 mm, V = 1 litre, T = 273 − 120 = 153 K. PV = nRT: n = PV/RT = (10−16 × 1)/(760 × 0.0821 × 153) = 1.05 × 10−20. Number of Hg atoms = 6.023 × 1023 × 1.05 × 10−20 = 6324 atoms per litre (using n = 1.047 × 10−20 gives ≈ 6.3 × 103).
Teacher's Note: Mercury vapour behaves ideally at tiny pressure; find moles per litre then count atoms.
Exam Note: Convert torr to atm and °C to K first.
Question 52. Helium is contained at 30.2°C in the system as shown in the figure. The levelling bulb (L) can be raised so as to fill the lower bulb with mercury and force the gas into the upper part of the device. The volume of bulb (A) to the mark 'a' is 100.5 cm3 and the volume of bulb (B) between the marks 'a' and 'b' is 110 cm3. The pressure exerted by the He is measured by the difference between the mercury levels in the device and in the evacuated arm of the manometer when mercury level is at 'b', the pressure is 20.14 mm of Hg. What is the mass of the helium in container? [Figure not reproduced here.]
Solution. Figure (not redrawn): a bulb A (100.5 cm3 up to mark a) above a bulb B (110 cm3 between marks a and b), joined by a U-tube manometer to an evacuated arm and a levelling bulb L of mercury. Pressure of He = 20.14 mm; temperature of He = 273 + 30.2 = 303.2 K; volume of He = 110 + 100.5 = 210.5 cm3. PV = nRT = (w/M)RT: w = PVM/RT = (20.14 × 210.5 × 4)/(760 × 0.0821 × 303.2 × 1000), so wHe = 8.96 × 10−4 g.
Teacher's Note: Gas fills both bulbs when mercury is at mark b, so volume is 210.5 cm3; MHe = 4.
Exam Note: Add volumes of A and B; convert cm3 to litre.
Question 53. A glass capillary tube sealed at both ends is 100 cm long. It lies horizontally with the middle 10 cm containing Hg. The two ends of the tube which are equal in length contain air at 27°C and pressure of 76 cm of Hg. The tube is kept in a horizontal position such that the air column at one end is at 0°C, the other end is maintained at 127°C. Calculate the length of the air column and its pressure which is at 0°C. Neglect the change in volume of Hg and glass.
Solution. Figure (not redrawn): a horizontal sealed tube with a 10 cm mercury thread in the middle; the left air column is at 273 K, the right at 400 K. According to the problem, initially 2L + 10 = 100, so L = 45 cm. Let the initial pressure be P0 on each side. When one end is cooled and the other heated, expansion of gas occurs at the hotter end till the pressure on two sides becomes the same. Let the Hg column be displaced by x cm to the cooler end. For end A: P0 × 45 × a/300 = P1(45 − x)a/273 ...(1). For end B: P0 × 45 × a/300 = P2(45 + x)a/400 ...(2) (moles are the same at 273 K and 300 K; a is the area of cross-section). With P1 = P2: 273 × 45 × P0/(300(45 − x)) = 400 × 45 × P0/(300(45 + x)), so x = 8.49 cm. Length of air column at 0°C = 45 − 8.49 = 36.51 cm; length at 127°C = 45 + 8.49 = 53.49 cm. Pressure P = P1 = (273 × 45 × 76)/(300 × 36.51) = 85.25 cm of Hg.
Teacher's Note: Mercury thread moves until pressures balance; moles on each side stay fixed.
Exam Note: Equal pressure both sides fixes the thread displacement x.
Question 54. A column of Hg of 10 cm in length is contained in the middle of a narrow tube 1 m long which is closed at both ends. Both the halves of the tube contained air at a pressure 76 cm of Hg. By what distance will the column of Hg be displaced if the tube is held vertically? (Roorkee Phy. 1989)
Solution. Figure (not redrawn): a horizontal sealed tube with a 10 cm mercury thread in the middle, then held vertically with A above the mercury and B below it. Let initially the length of air column on each side be L: 2L + 10 = 100, so L = 45 cm. If the tube is held vertically, let the Hg column be displaced downwards by y to attain the same pressure above and below the column of Hg: PB + 10 = PA ...(1) (pressures in cm of Hg). For end A: P0 × L × a/RT = PA(L − y)a/RT, so PA = LP0/(L − y) ...(3). For end B: P0 × L × a/RT = PB(L + y)a/RT, so PB = LP0/(L + y) ...(5). By Eqs. (1), (3) and (5): LP0/(L + y) + 10 = LP0/(L − y). Putting L = 45 cm and P0 = 76 cm: y2 + 684y − (45)2 = 0, so y = 3 cm (exactly 2.95 cm).
Teacher's Note: Vertical tube: lower gas must support the upper gas plus the 10 cm mercury; Boyle's law on each side.
Exam Note: Use PB + 10 = PA; solve the quadratic.
Question 55. A vertical cylinder closed at both ends, is divided into two parts by a frictionless piston, each part containing one mole of air. At temperature 300 K, the volume of upper part is 4 times than that of the lower part. At what temperature will the volume of upper part be three times than that of lower part?
Solution. Case I, at 300 K: let pressure in the upper half be P1 and in the lower half P2; P0 is the pressure due to the piston. At equilibrium P2 = P0 + P1 ...(1). Let the volume of the cylinder be V litre: volume of upper half = 4V/5 and of lower half = V/5. Each part contains 1 mole at 300 K, so P1 × 4V/5 = P2 × V/5, P2/P1 = 4 ...(2). By Eqs. (1) and (2), P1 = P0/3 ...(3). Case II, at T K: volume of upper half is 3V/4 and lower half is V/4. P′1 × 3V/4 = P′2 × V/4, so P′2/P′1 = 3 ...(4), and by Eqs. (1) and (4), P′1 = P0/2 ...(5). Using PV = nRT for the upper part: at 300 K, P1 × 4V/5 = 1 × R × 300; at T K, P′1 × 3V/4 = 1 × R × T. Dividing: (P1/P′1) × 16/15 = 300/T ...(6). Using (3) and (5) in (6): (2/3) × (16/15) = 300/T, so T = 300 × 3 × 15/(2 × 16) = 421.875 K.
Teacher's Note: Piston adds fixed pressure P0 to the gas below; each volume ratio fixes P1 in terms of P0.
Exam Note: Express P1 via P0 in both states.
Question 56. A thin tube of uniform cross-section is sealed at both ends. It lies horizontally. The middle 5 cm containing Hg and the two equal ends containing air at the same pressure P0. When the tube is held at an angle 60° with the vertical, the length of the air column above and below the mercury are 46 and 44.5 cm respectively. Calculate the pressure P0 in cm of Hg. (The temperature of the system is kept at 30°C) [IIT Phy. 1986]
Solution. Let initially the length of air column in the tube be L cm: 2L + 5 = 46 + 5 + 44.5, so L = 45.25 cm. Figure (not redrawn): tube inclined at 60° to the vertical with the 5 cm Hg thread, upper air column 46 cm (end B) and lower air column 44.5 cm (end A). When the tube is held vertically at 60°, the Hg is displaced to the lower end, so PB + 5 cos 60° = PA, or PA − PB = 5 × 1/2 = 2.5 cm of Hg ...(1). For end A: P0 × a × 45.25/RT = PA × 44.5 × a/RT, so PA = (45.25/44.5)P0 ...(2). For end B: P0 × a × 45.25/RT = PB × 46 × a/RT, so PB = (45.25/46)P0 ...(3). By Eqs. (1), (2) and (3): P0 = 75.4 cm of Hg.
Teacher's Note: Inclined tube: mercury's pressure head is 5 cos 60° cm; Boyle's law on each air column.
Exam Note: Vertical height of Hg thread is 5 cos 60°, not 5.
Question 57. An under water bubble with a radius of 0.5 cm at the bottom of tank, where the temperature is 5°C and pressure is 3 atm rises to the surface, where temperature is 25°C and pressure is 1 atm. What will be the radius of bubble when it reaches to surface?
Solution. The mole of air contained in the bubble at the bottom of the tank as well as at the surface remains the same. Thus n = P1V1/RT1 (at bottom of the tank) = P2V2/RT2 (at the surface): (3 × (4/3)π(0.5)3)/(R × 278) = (1 × (4/3)πr3)/(R × 298), so r = 0.74 cm.
Teacher's Note: Combined gas law on a spherical bubble: volume scales as r3, so take a cube root.
Exam Note: Take the cube root: volume ratio gives r3.
Question 58. A mixture of N2 and water vapours is admitted to a flask which contains a solid drying agent. Immediately after admission, the pressure of the flask is 760 mm. After standing some hours, the pressure reached a steady value of 745 mm. (a) Calculate the composition in mole % of original mixture. (b) If the experiment is done at 20°C and the drying agent increases in mass by 0.15 g, what is the volume of flask? (neglect volume occupied by drying agent)
Solution. Given PN2 + PH2O = 760 mm. H2O is dried by the drying agent and the left pressure stands for N2: PN2 = 745 mm, PH2O = 760 − 745 = 15 mm. (a) PN2 = PM × mole fraction of N2, so mole fraction of N2 = 745/760 = 0.9803, i.e. % mole of N2 = 98.03% and % mole of H2O = 1.97%. (b) The mass of H2O in the mixture = increase in mass of drying agent = 0.15 g, so mole of H2O = 0.15/18. Using PV = nRT for water vapour in a flask of volume V: (15/760) × V = (0.15/18) × 0.0821 × 293 (T = 273 + 20 = 293 K), so V = 10.16 litre.
Teacher's Note: The pressure drop after drying equals water vapour's partial pressure; its moles come from the mass gain.
Exam Note: Pressure drop = partial pressure of water vapour.
Question 59. A vessel of volume 5 litre contains 1.4 g of nitrogen at a temperature of 1800 K. Find the pressure of the gas if 30% of its molecules are dissociated into atom at this temperature.
Solution. N2 ⇌ 2N. Initial mole 1.4/28, 0. Mole after dissociation: (1.4/28) × 70/100 and (1.4/28) × 2 × 30/100. Total mole = (1.4/28) × (70/100) + (1.4 × 60)/(100 × 28) = (1.4/28) × (130/100). P × 5 = (1.4 × 130)/(28 × 100) × 0.0821 × 1800, so P = 1.92 atm.
Teacher's Note: Each dissociated N2 gives two atoms, so total moles become 1 + α times the initial.
Exam Note: Total moles = 0.05 × 1.3, not 0.05.
Question 60. A vertical hollow cylinder of height 1.52 m is fitted with a movable piston of negligible mass and thickness. The lower half of the cylinder contains an ideal gas and the upper half is filled with mercury. The cylinder is initially at 300 K. When the temperature is raised half of the mercury comes out of the cylinder. Find the temperature assuming the thermal expansion of mercury to be negligible. (Roorkee Phy. 1993)
Solution. Initially at the lower end: P = 76 cm of Hg + 76 cm of air = 152 cm, T = 300 K, V = V1/2, where V1 is the volume of the cylinder. Finally at the lower end: P = 76 cm of air + 38 cm of Hg = 114 cm, T = ?, V = 3V1/4. Figure (not redrawn): cylinder 152 cm high, lower half gas, upper half mercury 76 cm, then 38 cm of mercury left above 114 cm of gas space. P1V1/T1 = P2V2/T2: (152 × V1/2)/300 = (114 × 3V1/4)/T, so T = 114 × 3 × 2 × 300/(152 × 4) = 337.5 K.
Teacher's Note: Gas pressure = atmosphere plus mercury column above the piston, which falls as mercury spills out.
Exam Note: Pressure = 76 cm atmosphere + remaining Hg height.
Question 61. Two closed vessels of equal volumes contain air at 105 kPa and 300 K are connected through a narrow tube of negligible volume. If one of the vessel is maintained at 300 K and other at 400 K, what will be the new pressure in vessel? Also calculate the ratio of number of mole in each vessel.
Solution. Each vessel contains n mole initially since both are at the same conditions: P′ × V = nR × 300 ...(1); P × V = nR × 300 ...(2); with P′ + P = PT = 105 × 103 Pa. On putting one vessel at 400 K, mole from this vessel will move to the vessel at 300 K. Let n1 mole move from II to I. The pressure in the two vessels will be the same: P1 × V = (n + n1) × R × 300 (vessel I, n > n1) ...(4); P1 × V = (n − n1) × R × 400 (vessel II) ...(5). Dividing: (n + n1)/(n − n1) = 400/300, so 300n + 300n1 = 400n − 400n1, n1 = n/7. Vessel I has n + n/7 = 8n/7 mole; vessel II has n − n/7 = 6n/7 mole. Ratio of mole in vessel I and II = 8/6 = 4/3. New pressure: P1 = (8n/7)R × 300/V = (8/7) × 105 × 103 Pa = 120 kPa. (Corrected working: the book's Eq. (3) and the step giving P1 = 60000 Pa and total = 2P1 are muddled; since nR × 300/V = 105 kPa the pressure in each vessel is 120 kPa, which is the book's final answer.)
Teacher's Note: Total moles conserved; equal pressure with T ratio 3:4 gives mole ratio 4:3 between the vessels.
Exam Note: Equal P and V: moles inversely proportional to T.
Question 62. One litre flask contains air, water vapour and a small amount of liquid water at a pressure of 200 mm Hg. If this is connected to another one litre evacuated flask, what will be the final pressure of the gas mixture at equilibrium? Assume the temperature to be 50°C. Aqueous tension at 50°C = 93 mm Hg.
Solution. The aqueous tension remains same in both the flasks, and the flasks are at the same temperature. Initial pressure of gas (air) P1 = 200 − 93 = 107 mm. Final pressure of gas = P: P1V1 = P2V2 gives 107 × 1 = P × 2, so P = 107/2 = 53.5 mm. Since aqueous tension or P′H2O is also present in the flasks, equivalent to 93 mm, pressure of gaseous mixture = 93 + 53.5 = 146.5 mm.
Teacher's Note: Air expands into double volume (Boyle's law) but liquid water keeps vapour pressure fixed at 93 mm.
Exam Note: Do not halve the water vapour pressure.
Question 63. A closed vessel contains, saturated water vapours and excess of water. The total pressure in the vessel is 760 mm Hg at 25°C. The temperature is raised to 100°C. Calculate the total pressure in vessel. Aqueous tension of H2O at 25°C and 100°C are 24 mm and 760 mm Hg.
Solution. Pwet air = 760 mm at 298 K, so Pdry air = 760 − 24 = 736 mm at 298 K. When the temperature is raised to 100°C: P1/P2 = T1/T2, 736/P2 = 298/373, so P2 = 921.23 mm Hg. Pwet air at 100°C = P2 + PH2O at 373 K = 921.23 + 760 = 1681.23 mm Hg.
Teacher's Note: Dry air obeys the P/T law at constant volume; water vapour pressure is added at its new value.
Exam Note: Add aqueous tension at 100°C (760 mm), not 24 mm.
Question 64. Find out the mass of water vapour per litre of air at 300 K when relative humidity is 50%. The saturation vapour pressure at 300 K is 3.6 kPa.
Solution. Using PV = (w/M)RT [saturation vapour pressure of water = 3.6 × 103 Pa, V = 1 litre = 1 × 10−3 m3]: 3.6 × 103 × 10−3 = (wH2O/18) × 8.314 × 300, so wH2O = 0.026 g at saturation. Since relative humidity is 50%, mass of water vapour = 0.026 × 0.5 = 0.013 g (13 mg per litre). Corrected: the book prints '0.026 kg = 26 g' and '13 g'; the calculation gives 0.026 g and 0.013 g (units slip by 1000).
Teacher's Note: Partial pressure of water = RH × saturation pressure; the gas law then gives its mass in 1 L.
Exam Note: Half of saturation pressure means half the mass.
Question 65. Assume that dry air contains 79% N2 and 21% O2 by volume. Calculate the density of dry air and moist air at 25°C and 1 atmospheric pressure when relative humidity is 60%. The vapour pressure of water at 25°C is 23.76 mm. [Relative humidity is given by percentage relative humidity = 100 × partial pressure of water / vapour pressure of water at that temperature]
Solution. For dry air: P(N2 + O2) = 760 mm, so PN2 = 760 × 79/100 = 600.40 mm and PO2 = 760 × 21/100 = 159.60 mm. Let the volume be 1 litre. Mole of N2 = PV/RT = (600.4 × 1)/(760 × 0.0821 × 298) = 3.23 × 10−2; mole of O2 = (159.6 × 1)/(760 × 0.0821 × 298) = 8.58 × 10−3. Density of dry air = mass of dry air in one litre = 3.23 × 10−2 × 28 + 8.58 × 10−3 × 32 = 90.44 × 10−2 + 27.46 × 10−2 = 1.179 g/litre. For moist air: partial pressure of water = (60/100) × 23.76 = 14.3 mm; partial pressure of (N2 + O2) = 760 − 14.3 = 745.7 mm, so PN2 = 745.7 × 79/100 = 589.1 mm and PO2 = 745.7 × 21/100 = 156.6 mm. For 1 litre: mole of water vapour = (14.3 × 1)/(760 × 0.0821 × 298) = 7.7 × 10−4; mole of N2 = 589.1/(760 × 0.0821 × 298) = 3.17 × 10−2; mole of O2 = 156.6/(760 × 0.0821 × 298) = 8.43 × 10−3. Total mass in one litre = 7.7 × 10−4 × 18 + 3.17 × 10−2 × 28 + 8.43 × 10−3 × 32 = 1.171 g. Density of moist air at 25°C = 1.171 g litre−1.
Teacher's Note: Moist air is less dense: water vapour (18) replaces some N2/O2 (about 29) at the same total pressure.
Exam Note: Water vapour displaces heavier air, so density falls.
Question 66. A mixture of H2O(v), CO2 and N2 was trapped in a glass apparatus with a volume of 0.731 mL. The pressure of total mixture was 1.74 mm of Hg at 23°C. The sample was transferred to a bulb in contact with dry ice (−75°C) so that H2O(v) are frozen out. When the sample returned to normal value of temperature, pressure was 1.32 mm of Hg. The sample was then transferred to a bulb in contact with liquid N2 (−95°C) to freeze out CO2. In the measured volume, pressure was 0.53 mm of Hg at original temperature. How many mole of each constituent are in mixture?
Solution. Given volume of container = 0.731 mL, temperature = 23 + 273 = 296 K. PH2Ov + PCO2 + PN2 = 1.74 mm ...(1). When H2Ov is frozen out, the pressure exists for CO2 and N2: PCO2 + PN2 = 1.32 mm ...(2). When CO2 is frozen out, the pressure exists for N2 only: PN2 = 0.53 mm ...(3). By Eqs. (1), (2) and (3): PCO2 = 0.79 mm, PH2Ov = 0.42 mm. Now for N2: PV = nRT, n = PV/RT = (0.53 × 0.731)/(760 × 1000 × 0.0821 × 296) = 2.1 × 10−8. Similarly for CO2 n = 3.1 × 10−8 and H2O n = 1.7 × 10−8 (mole).
Teacher's Note: Successive freezing removes one component each time; pressure differences give partial pressures at the same V and T.
Exam Note: Partial pressures come from differences between readings.
Question 67. What would be the final pressure of O2 in following experiment? A collapsed polyethylene bag of 30 litre capacity is partially blown up by the addition of 10 litre of N2 at 0.965 atm at 298 K. Subsequently enough O2 is pumped into bag so that at 298 K and external pressure of 0.990 atm, the bag contains full 30 litre.
Solution. Given pressure of N2 = 0.965 atm, volume of N2 = 10 litre, temperature of N2 = 298 K. For N2 when the bag is fully expanded, volume of N2 (alone) = 30 litre at 298 K: P1V1 = P2V2, 0.965 × 10 = P2 × 30, so PN2 (alone) in the 30 litre bag = 0.322 atm. Now PM = PO2 + PN2: 0.990 = PO2 + 0.322, so PO2 = 0.668 atm.
Teacher's Note: Total pressure inside the bag equals the external pressure; N2 alone follows Boyle's law on expansion.
Exam Note: Total pressure is 0.990 atm; subtract N2 partial pressure.
Question 68. A mixture of N2, NO and NO2 in a closed container was analysed by selective absorption of the oxides of nitrogen. The initial pressure was 3.0 cm. After treatment with water, which absorbs NO2, the pressure left was 2.42 cm. A ferrous sulphate solution was then shaken with residual gas mixture to absorb NO after which the pressure was 1.24 cm. If vapour pressure of H2O, in gaseous mixture after shaking with H2O and in FeSO4 solution were 0.2 cm and 0.18 cm respectively calculate the mole % of gases in initial mixture. Assume all measurements are made at same P and T.
Solution. PN2 + PNO + PNO2 = 3.0 cm ...(1). After water (absorbs NO2, and H2O vapour exists in the gases): PN2 + PNO + P′H2O = 2.42 cm ...(2). After FeSO4 (absorbs NO, and H2O vapour exists): PN2 + P″H2O = 1.24 cm ...(3). Given P′H2O = 0.2 cm and P″H2O = 0.18 cm. By Eq. (3): PN2 = 1.24 − 0.18 = 1.06 cm ...(4). By Eqs. (2) and (4): PNO = 2.42 − 1.06 − 0.2 = 1.16 cm; PNO2 = 3.0 − 1.06 − 1.16 = 0.78 cm. Mole % of N2 = (1.06/3) × 100 = 35.33; mole % of NO = (1.16/3) × 100 = 38.67; mole % of NO2 = (0.78/3) × 100 = 26.00.
Teacher's Note: Same V and T: each absorption removes one gas, so pressure drops are partial pressures; subtract water vapour.
Exam Note: Correct for water vapour pressure after each wet absorption.
Question 69. Calculate the change in pressure when 1.04 mole of NO and 20.0 g O2 in a 20 litre vessel originally at 27°C react to produce the maximum quantity of NO2 possible according to the equation. 2NO(g) + O2(g) → 2NO2(g)
Solution. 2NO(g) + O2(g) → 2NO2(g). Before reaction: NO 1.04 mol, O2 20/32 = 0.625 mol. After reaction: NO 0, O2 (20/32 − 1.04/2) = 0.105 mol, NO2 1.04 mol. Total mole before reaction = 1.04 + 20/32 = 1.665; total mole after reaction = 20/32 − 1.04/2 + 1.04 = 1.145. Change in number of mole during reaction = 1.665 − 1.145 = 0.520. Change in pressure = ΔnRT/V = (0.52 × 0.0821 × 300)/20 = 0.64 atm (decrease).
Teacher's Note: NO is the limiting reagent; three moles of gas become two, so pressure falls.
Exam Note: Identify limiting reagent before counting moles after.
Question 70. A 40 mL of a mixture of H2 and O2 was placed in a gas burette at 18°C and 1 atm P. A spark was applied so that the formation of water was complete. The remaining pure gas had a volume of 10 mL at 18°C and 1 atm P. If the remaining gas was H2, what was the initial mole % of H2 in mixture?
Solution. Given reaction: 2H2 + O2 → 2H2O(l). Volume before reaction: a (H2) and b (O2); volume after reaction: (a − 2b) and 0. Since at constant P and T gases react in their volume ratio: a + b = 40 and a − 2b = 10, so a = 30 mL, b = 10 mL. Mole % of H2 = volume % of H2 = (30/40) × 100 = 75%.
Teacher's Note: At constant P and T, volume ratio equals mole ratio; liquid water occupies negligible volume.
Exam Note: Water is liquid, so it takes no gas volume.
Question 71. A flask of capacity one litre containing NH3 at 1 atm and 25°C. A spark is passed through until all the NH3 is decomposed into N2 and H2. Calculate: (a) the pressure of gases left at 25°C. (b) the mole of N2 and H2 formed.
Solution. 2NH3 → N2 + 3H2. (a) Since the number of mole after reaction (n2) = 2 × the number of mole before reaction (n1) at the same T and V, P ∝ n: P1/P2 = n1/n2 = 1/2. Pressure after reaction = 2 atm. (b) For NH3: P = 1 atm, V = 1 litre, T = 298 K: mole of NH3 = PV/RT = (1 × 1)/(0.0821 × 298) = 4.087 × 10−2. Mole of N2 formed = 4.087 × 10−2 × 1/2 = 2.0435 × 10−2. Mole of H2 formed = 4.087 × 10−2 × 3/2 = 6.1305 × 10−2.
Teacher's Note: Two moles of NH3 give four moles of gas, doubling moles and hence pressure at fixed V and T.
Exam Note: Moles double: 2 NH3 gives 4 mol of N2 + H2.
Question 72. At room temperature following reaction goes to completion: 2NO + O2 → 2NO2 → N2O4. Dimer N2O4 at 262 K is solid. A 250 mL flask and a 100 mL flask are separated by a stop cock. At 300 K, the nitric oxide in the larger flask exerts a pressure of 1.053 atm and the smaller one contains O2 at 0.789 atm. The gases are mixed by opening the stop cock and after the end of the reaction, the flasks are cooled to 220 K. Neglecting the vapour pressure of dimer, find out the pressure and composition of gas remaining at 220 K. (Assume gases behave ideally) (IIT 1992)
Solution. For NO: V = 250 mL, T = 300 K, P = 1.053 atm; nNO = PV/RT = (1.053 × 250)/(0.0821 × 300 × 1000) = 1.069 × 10−2. For O2: V = 100 mL, T = 300 K, P = 0.789 atm; nO2 = (0.789 × 100)/(0.0821 × 300 × 1000) = 0.32 × 10−2. Reaction 2NO + O2 → N2O4: mole before reaction NO 1.069 × 10−2, O2 0.32 × 10−2, N2O4 0; mole after reaction NO (1.069 × 10−2 − 2 × 0.32 × 10−2) = 0.429 × 10−2, O2 0, N2O4 0.32 × 10−2 (solid at 220 K). So mole of NO left = 4.29 × 10−3. PNO × V = nRT with V = (250 + 100)/1000 = 350/1000 litre and T = 220 K: PNO × 350/1000 = 4.29 × 10−3 × 0.0821 × 220, so PNO left = 0.221 atm. The gas remaining at 220 K is NO only (O2 fully used; N2O4 is solid).
Teacher's Note: O2 is limiting, NO in excess; solid dimer exerts no pressure at 220 K.
Exam Note: Total volume after opening stop cock is 350 mL.
Question 73. A compound exists in the gaseous phase both as monomer (A) and dimer (A2). The molar mass of A is 48. In an experiment 96 g of the compound was confined in a vessel of volume 33.6 litre and heated to 273°C. Calculate the pressure developed if the compound exists as dimer to the extent of 50% by mass under these conditions.
Solution. Since A and A2 are two states in the gaseous phase having their mass ratio 50%, i.e. 1 : 1. Mole of A = (96/2) × (1/48) = 1 (n = w/m); mole of A2 = (96/2) × (1/96) = 1/2. Total mole of A and A2 = 1 + 1/2 = 3/2. Thus PV = nRT: P × 33.6 = (3/2) × 0.0821 × 546, so P = 2 atm.
Teacher's Note: Equal mass halves: 1 mol monomer plus 0.5 mol dimer (molar mass 96), 1.5 mol total.
Exam Note: Dimer molar mass is 2 × 48 = 96.
Question 74. 60 mL of a mixture of equal volumes of Cl2 and an oxide of chlorine was heated and then cooled back to the original temperature. The resulting gas mixture was found to have volume of 75 mL. On treatment with caustic soda solution, the volume contracted to 15 mL. Assume that all measurements are made at the same T and P. Deduce the simplest formula for oxide of Cl2. The oxide of Cl2 on heating decomposes quantitatively to O2 and Cl2.
Solution. Cl2 + Cl2On → Cl2 + Cl2 + (n/2)O2 (only the oxide decomposes). Before reaction: 30 mL Cl2, 30 mL Cl2On. After reaction: oxide 0, Cl2 total 60 mL, O2 15n mL. The volume of O2 = volume left after passing the mixture through caustic soda (which absorbs Cl2) = 75 − 60 = 15 mL, so 15n = 15 and n = 1. Formula of the oxide = Cl2O.
Teacher's Note: Caustic soda absorbs Cl2; the leftover 15 mL is O2, fixing n in Cl2On from volume ratios.
Exam Note: Use gas volumes directly (Gay-Lussac) to find n.
Question 75. One litre of O2 and one litre of H2 are taken in a vessel of 2 litre capacity at NTP. The gases are made to combine to form water. Calculate: (a) the mole and mass of water formed. (b) the amount of gas left in vessel. (c) the total pressure if the vessel is heated to 100°C. (d) mole of O2 used for formation of water.
Solution. 2H2 + O2 → 2H2O(g). Volume before reaction in litre: H2 1, O2 1, H2O 0; after reaction: 0, 0.5, 1. (a) Mole of H2O formed = PV/RT = (1 × 1)/(0.0821 × 273) = 4.46 × 10−2; mass of H2O formed = 4.46 × 10−2 × 18 = 8.03 × 10−1 g. (b) Gas left is O2 = 0.5 litre at STP = 2.23 × 10−2 mole; mass of O2 left = 32 × 0.5/22.4 g = 0.7143 g. (c) At 100°C H2O also exists as vapour: total mole present at 100°C = mole of H2O formed + mole of O2 left = 4.46 × 10−2 + 2.23 × 10−2 = 6.69 × 10−2; volume of vessel = 2 litre, so P = nRT/V = (6.69 × 10−2 × 0.0821 × 373)/2 = 1.02 atm. (d) Volume of O2 used for formation of H2O = 0.5 litre, so mole of O2 used = 0.5/22.4 = 2.23 × 10−2.
Teacher's Note: H2 is limiting (2 : 1 stoichiometry); at 100°C water is vapour and adds to the pressure.
Exam Note: Find the limiting reagent first.
Question 76. A space capsule is filled with neon at 1 atm and 290 K. The gas effuses through a pin hole into outer space at the rate that pressure drops by 0.3 torr/sec. If the capsule is filled with 30 mole % of He, 20 mole % of O2 and 50 mole % of N2. What is the pressure drop under same condition?
Solution. Molar mass of mixture = (30 × 4 + 20 × 32 + 50 × 28)/100 = 21.60. Rate of diffusion in terms of change of P per second for Ne = 0.3 torr/sec. Let the rate of diffusion in terms of change of P/sec for the mixture be r2 torr/sec: 0.3/r2 = √(21.60/20), so r2 = 0.289 torr/sec.
Teacher's Note: Graham's law: rate ∝ 1/√M, with the mixture's average molar mass 21.6 against neon's 20.
Exam Note: Average molar mass of the mixture, then Graham's law.
Question 77. 20 dm3 of SO2 diffuses through a porous partition in 60 second. What volume of O2 will diffuse under similar conditions in 30 second? (Roorkee 1996)
Solution. r1/r2 = (V1/V2) × (t2/t1) = √(M2/M1): (20/V) × (30/60) = √(32/64), so V = 14.14 dm3.
Teacher's Note: Graham's law with volumes and times: rate = volume/time, inversely proportional to √M.
Exam Note: Rate is volume per time, not volume alone.
Question 78. Pure O2 diffuses through an aperture in 224 second, whereas mixture of O2 and another gas containing 80% O2 diffuses from the same in 234 sec. What is molar mass of gas?
Solution. For the gaseous mixture, 80% O2, 20% gas: average molar mass of mixture (Mm) = (32 × 80 + 20 × m)/100 ...(1). For diffusion of the gaseous mixture and pure O2: rO2/rm = √(Mm/MO2), or (VO2/tO2) × (tm/Vm) = √(Mm/32) (same volume diffuses): (1/224) × (234/1) = √(Mm/32), so Mm = 34.92 ...(2). By Eqs. (1) and (2), molar mass of gas m = 46.6.
Teacher's Note: Equal volumes: time is inversely proportional to rate, so tm/tO2 = √(Mm/32).
Exam Note: Time ratio equals √(M ratio) for equal volumes.
Question 79. One mole of nitrogen gas at 0.8 atm takes 38 second to diffuse through a pinhole, whereas one mole of an unknown compound of xenon with fluorine at 1.6 atm takes 57 second to diffuse through the same hole. Calculate the molecular formula of the compound. (IIT 1999)
Solution. r1/r2 = √(M2/M1) × (P1/P2), i.e. (n1/t1) × (t2/n2) = √(M2/M1) × (P1/P2): (1/38) × (57/1) = √(Mg/28) × (0.8/1.6), so Mg = [(57/38) × (1.6/0.8)]2 × 28 = 252. Thus the compound is XeF6 because it can have only one xenon atom (for two xenon atoms, 2 × atomic mass of Xe = 2 × 131 = 262, i.e. greater than 252).
Teacher's Note: Effusion rate also depends on pressure: rate ∝ P/√M; solve M, then fit XeFn.
Exam Note: Include the pressure factor 0.8/1.6 in the rate ratio.
Question 80. For 10 minute each, at 27°C, from two identical holes nitrogen and an unknown gas are leaked into a common vessel of 3 litre capacity. The resulting pressure is 4.18 bar and the mixture contains 0.4 mole of nitrogen. What is the molar mass of unknown gas?
Solution. P = 4.18 bar, V = 3 L, T = 300 K, R = 0.083 bar litre K−1 mol−1. Total mole nT = PV/RT = (4.18 × 3)/(0.083 × 300) = 0.50. Total mole of gases diffused = 0.50. Mole of unknown gas ng diffused = nT − nN2 = 0.50 − 0.40 = 0.10. Now (ng/nN2) × (tN2/tg) = √(MN2/Mg) (tN2 = tg = 10 min): 0.1/0.4 = √(28/Mg), so Mg = 448 g mol−1. (Using the unrounded nT = 0.5036 gives about 417; the book uses 0.50.)
Teacher's Note: Equal times through identical holes: moles effused are inversely proportional to √M.
Exam Note: Moles of unknown = total minus nitrogen.
Question 81. The rates of diffusion of two gases A and B are in the ratio 1 : 4. If the ratio of their masses present in the mixture is 2 : 3, calculate the ratio of their mole fraction.
Solution. Given r1/r2 = 1/4 and w1/w2 = 2/3. We have r1/r2 = √(M2/M1), so 1/4 = √(M2/M1), M2/M1 = 1/16. Also mole ratio n1/n2 = (w1/M1)/(w2/M2) = (w1/w2) × (M2/M1) = (2/3) × (1/16) = 1/24. (Mole fraction ratio xA : xB = 1 : 24.)
Teacher's Note: Graham's law gives the molar mass ratio; mass ratio divided by molar mass ratio gives the mole ratio.
Exam Note: Mole ratio = mass ratio × inverse molar-mass ratio.
Question 82. The composition of the equilibrium mixture (Cl2 ⇌ 2Cl), which is attained at 1200°C, is determined by measuring the rate of effusion through a pinhole. It is observed that at 1.80 mm Hg pressure, the mixture effuses 1.16 times as fast as krypton effuses under the same conditions. Calculate the fraction of chlorine molecules dissociated into atoms. (Atomic mass of Kr = 84) (IIT 1995)
Solution. γmix/γKr = √(MKr/MMix), or 1.16 = √(84/M), so M = 62.425. For Cl2 ⇌ 2Cl: initial 1, 0; at equilibrium (1 − α), 2α. Normal molar mass/experimental molar mass = 1 + α: 71/62.425 = 1 + α, so α = 0.137 or 13.7%.
Teacher's Note: Effusion rate gives the mixture's average molar mass; the molar-mass ratio equals 1 + α.
Exam Note: Use Graham's law, then Mnormal/Mexp = 1 + α.
Question 83. A mixture containing 1.12 litre D2 and 2.24 litre of H2 at NTP is taken inside a bulb connected to another bulb through a stop cock with a small opening. The second bulb is fully evacuated. The stop cock is opened for a certain time and then closed. The first bulb is now found to contain 0.10 g of D2. Determine the % by mass of the gases in second bulb. (Roorkee 1998)
Solution. At STP, before diffusion: D2 = 1.12 L at STP = 0.2 g = 0.05 mole; H2 = 2.24 L at STP = 0.2 g = 0.1 mole, in bulb I. When these moles are placed in the bulb, the partial pressures are different because V and T are constant and P ∝ n: PD2/PH2 = 0.05/0.10 = 1/2. After diffusion D2 left in bulb I = 0.1 g, so D2 diffused from I into II = 0.2 − 0.1 = 0.1 g. Now for diffusion of D2 and H2: rD2/rH2 = √(MH2/MD2) × PD2/PH2, i.e. (wD2/tD2) × (tH2/wH2) = √(MD2/MH2) × (PD2/PH2): (0.1/t) × (t/wH2) = √(4/2) × 1/2, so wH2 = 0.14 g. Mass of gases in II bulb = 0.10 g + 0.14 g = 0.24 g. % D2 by mass = (0.10/0.24) × 100 = 41.66%; % H2 in bulb II = 58.33%.
Teacher's Note: Effusion rate depends on both partial pressure and molar mass; same time for both gases.
Exam Note: Include partial-pressure ratio 1:2 in the rate ratio.
Question 84. Calculate the relative rates of diffusion for 235UF6 and 238UF6 in gaseous form. Also if naturally occurring uranium ore having U235 and U238 in the ratio 0.72 and 99.28%, and if it is desired to enrich the U235 to 10% of the sample, making use of relative rates of diffusion of UF6 having U235 and U238 isotopes, how many diffusion stages are required?
Solution. Molar mass of 235UF6 = 235 + 19 × 6 = 349; molar mass of 238UF6 = 238 + 19 × 6 = 352. From Graham's law at same P and T: r1/r2 = √(M2/M1): r(235UF6)/r(238UF6) = √(352/349) = 1.0043. Also x = 2 log[(n′A/n′B)/(nA/nB)]/log(MB/MA). Here nA = 235U in UF6 = 0.72 and nB = 238U = 99.28, MB = M238UF6, MA = M235UF6; n′A = 10 and n′B = 90. So x = 2 log[(10/90)/(0.72/99.28)]/log(352/349), x = 638 steps.
Teacher's Note: Each stage multiplies the isotope ratio by √(352/349) ≈ 1.0043, so thousands of stages are needed.
Exam Note: Stages x = 2 log(ratio gain)/log(M ratio).
Question 85. Naturally occurring hydrogen gas has abundance of 1H2 (molar mass 2) and 1H2H (molar mass 3). The % of 1H1H = 90.0%. In how much operations during diffusion of natural hydrogen gas will be enriched to 99.8% 1H1H.
Solution. H2 present has 1H2 (1H1H) and 1H2H in the ratio 90% and 10%; the outcoming sample has to be enriched to 99.8% 1H1H, i.e. 99.8 : 0.2. n2H = 90, n3H = 10, so nA/nB = 90/10; n′2H = 99.8, n′3H = 0.2, so n′A/n′B = 99.8/0.2. Separation factor = (99.8 × 10)/(0.2 × 90) = 55.44. For one operation f = n2H/n3H = √(M3H/M2H) = √(3/2). Now (f′)x = (n′A/n′B)/(nA/nB): [√(3/2)]x = 55.44, (x/2) log(3/2) = log 55.44, so x = 19.8 ≈ 20 steps.
Teacher's Note: Each diffusion step multiplies the abundance ratio by √(3/2) ≈ 1.2247; total gain needed is 55.44.
Exam Note: Take logarithms: x = log(factor)/log(√1.5).
Question 86. At 20°C, two balloons of equal volume and porosity are filled to a pressure of 2 atm, one with 14 kg N2 and other with 1 kg of H2. The N2 balloon leaks to a pressure of 1/2 atm in 1 hr. How long will it take for H2 balloon to reach a pressure of 1/2 atm?
Solution. At constant V and T for a gas P ∝ w. For N2: P1 = 2 atm, P2 = 1/2 atm at t = 1 hr, w1 = 14 kg, w2 = ?: P1/P2 = w1/w2, 2/(1/2) = 14/w2, w2 = 14/4 kg. Mass of N2 diffused = 14 − 14/4 = 42/4 = 21/2 kg. Similarly for H2: P1 = 2 atm, P2 = 1/2 atm at t = t hr, w1 = 1 kg: 2/(1/2) = 1/w2, w2 = 1/4 kg, so mass of H2 diffused = 1 − 1/4 = 3/4 kg. Now rN2/rH2 = √(MH2/MN2), or (wH2/wN2) × (tN2/tH2) = √(MH2/MN2): ((3/4)/(21/2)) × (60/t) = √(2/28) (tN2 = 1 hour = 60 minute), so t = 16 minute.
Teacher's Note: Pressure is proportional to mass left (same V and T); equal moles effuse, so time scales as √M ratio.
Exam Note: Mass effused follows from the pressure drop 2 to 1/2 atm.
Question 87. At 27°C, H2 is leaked through a tiny hole into a vessel for 20 minute. Another unknown gas at the same T and P as that of H2 is leaked through the same hole for 20 minute. After the effusion of the gases, the mixture exerts a pressure of 6 atm. The H2 content of the mixture is 0.7 mole. If volume of the container is 3 litre, what is molar mass of unknown gas? (IIT 1992)
Solution. Mole of H2 diffused = 0.7 in 20 minute. Mole of gas diffused = n1 in 20 minute. For the gaseous mixture after diffusion PV = nRT: n = (6 × 3)/(0.0821 × 300) = 0.731. The mixture contains mole of H2 + mole of gas diffused = n: 0.7 + n1 = 0.731, so n1 = 0.031. Now nH2/rg = √(Mg/MH2): (0.7/20) × (20/0.031) = √(Mg/2), so Mg = (0.7 × 0.7 × 2)/(0.031 × 0.031) = 1019.77 g mol−1.
Teacher's Note: Moles of unknown gas = total in vessel minus H2; equal times mean mole ratio equals rate ratio.
Exam Note: Subtract H2 moles from total to get the unknown.
Question 88. A mixture of 0.5 mole of CO and 0.5 mole of CO2 is taken in a vessel and allowed to effuse out through a pinhole into another vessel which has vacuum. If a total of 1 mole of A has effused out in time t, show that M1A + M2(1 − A) = 36, where M1 and M2 are mean molar masses of the mixture that has effused out and the mixture still remaining in vessel respectively.
Solution. Before diffusion: mole of CO = 0.5, mole of CO2 = 0.5. Total mole diffused out = A. Let mole of CO diffused = a and mole of CO2 diffused = b; then a + b = A ...(1). M1 = mean molar mass of diffused portion = (a × 28 + 44 × b)/(a + b) = (28a + 44b)/A ...(2). Also M2 = mean molar mass of left portion = [(0.5 − a) × 28 + (0.5 − b) × 44]/[(0.5 − a) + (0.5 − b)] = (14 − 28a + 22 − 44b)/(1 − (a + b)) = (36 − 28a − 44b)/(1 − A). Using Eq. (1): M2 = 36/(1 − A) − (28a + 44b)/(1 − A). Using Eq. (2): M2 = 36/(1 − A) − M1A/(1 − A), so M2(1 − A) = 36 − M1A, or M1A + M2(1 − A) = 36 (proved).
Teacher's Note: Mass is conserved: effused plus remaining mass equals original 36 g.
Exam Note: Show total mass 36 g splits between effused and remaining parts.
Question 89. A straight glass tube has two inlets X and Y at the two ends of 200 cm long tube. HCl gas through inlet X and NH3 gas through inlet Y are allowed to enter in the tube at the same time and same pressure. White fumes first appears at a point P inside the tube. Calculate distance of P from X.
Solution. Gas tube 200 cm: NH3 enters at Y, HCl at X. Let the distance of P from X end be a cm. For diffusion of NH3 and HCl at the same P (time is the same): dNH3/dHCl = √(MHCl/MNH3), i.e. ((200 − a)/a) = √(36.5/17), so a = 81.1 cm.
Teacher's Note: Distance covered in equal time is proportional to rate, hence inversely to √M; lighter NH3 travels farther.
Exam Note: HCl is heavier, so the ring forms nearer its inlet.
Question 90. At room temperature, NH3 gas at 1 atm and HCl gas at P atm are allowed to effuse through identical pinholes from opposite ends of a glass tube of 1 metre length and of uniform cross-section. NH4Cl is first formed at a distance of 60 cm from the end through which HCl gas is sent in. What is the value of P?
Solution. Figure (not redrawn): a 1 m tube with HCl entering at one end and NH3 at the other; the ring forms 60 cm from the HCl end and 40 cm from the NH3 end. For diffusion of NH3 and HCl, let the pressure of HCl = P atm and the pressure of NH3 = 1 atm: rNH3/rHCl = √(MHCl/MNH3) × (PNH3/PHCl), i.e. (dNH3/tNH3) × (tHCl/dHCl) = √(MHCl/MNH3) × (PNH3/PHCl): (40/t) × (t/60) = √(36.5/17) × (1/P) (time is same), so P = 2.198 atm.
Teacher's Note: Diffusion rate depends on pressure as well as molar mass: rate ∝ P/√M.
Exam Note: Include the pressure ratio, not only the molar masses.
Question 91. The pressure in bulb dropped from 2000 to 1500 mm of Hg in 47 minute when the contained O2 leaked through a small hole. The bulb was then completely evacuated. A mixture of O2 and another gas of molar mass 79 in the molar ratio 1 : 1 at a total pressure of 4000 mm of Hg was introduced. Find the mole ratio of two gases remaining in the bulb after a period of 74 minute.
Solution. 2000 mm pressure of O2 falls to 1500 mm in 47 min; the mixture at 4000 mm (1 : 1, O2 + gas) is allowed to effuse for 74 min. For pure O2, P1/P2 = n1/n2. When n1 and n2 are the original number of mole of O2 and mole of O2 after 47 minute: n1/n2 = 2000/1500, n2 = (3/4)n1. Mole of O2 diffused in 47 min = n1 − 3n1/4 = n1/4; mole of O2 diffused in 74 min = (n1 × 74)/(47 × 4) = 0.3936 (if n1 = 1). In the mixture O2 also effuses at its partial pressure of 2000 mm (ratio of gas and O2 being 1 : 1); the gas and O2 both diffuse through the same orifice at partial pressure 2000 mm each: (nO2/74) × (74/ng) = √(79/32), so ng = nO2 × √(32/79) = (74/188) × √(32/79) = 0.2505. Mole of O2 left after 74 minute = 1 − 0.3936 = 0.6064; mole of gas left after 74 minute = 1 − 0.2505 = 0.7495. O2 : gas = 0.6064 : 0.7495 = 1 : 1.236. Corrected: the book prints ng = 0.249 and gas left 0.7510; the arithmetic gives 0.2505 and 0.7495, which still yields the book's final ratio 1 : 1.236.
Teacher's Note: Pure-O2 run gives the effusion constant; in the mixture each gas effuses at 2000 mm partial pressure.
Exam Note: Both gases effuse at equal partial pressures; rates ∝ 1/√M.
Question 92. A 4 : 1 molar mixture of He and CH4 is contained in a vessel at 20 bar pressure. Due to a hole in the vessel, the gas mixture leaks out. What is the composition of the mixture effusing out initially? (IIT 1994)
Solution. Molar ratio of He and CH4 is 4 : 1, so the partial pressure ratio of He and CH4 is 16 : 4 (total pressure = 20 bar). nHe/nCH4 = √(MCH4/MHe) × (PHe/PCH4) (time of diffusion for both is the same) = √(16/4) × (16/4) = 8 : 1. The composition of the mixture initially going out for He and CH4 is 8 : 1.
Teacher's Note: Initial effusion rate ∝ partial pressure/√M, so light He is enriched in the escaping gas.
Exam Note: Use partial pressures 16 and 4 bar, then Graham's law.
Question 93. Calculate the root mean square speed and average speed for a sample of gas having 5, 10 and 15 molecules each one in a set is moving with a speed of 15 × 102, 5 × 102 and 10 × 102 m s−1 respectively.
Solution. urms = √[(n1u12 + n2u22 + n3u32)/(n1 + n2 + n3)] = √[(5 × (15 × 102)2 + 10 × (5 × 102)2 + 15 × (10 × 102)2)/(5 + 10 + 15)] = 9.79 × 102 m sec−1. Also uAV = (n1u1 + n2u2 + n3u3)/(n1 + n2 + n3) = (5 × 15 × 102 + 10 × 5 × 102 + 15 × 10 × 102)/(5 + 10 + 15) = 9.17 × 102 m sec−1.
Teacher's Note: rms speed is the root of the mean of squares; average speed is the plain weighted mean.
Exam Note: Square speeds before averaging for rms.
Question 94. Calculate root mean square speed, average speed and most probable speed of: (a) O2 at STP. (b) Ethane at 27°C and 720 mm of Hg. (c) O2 at 17°C. (d) O2 if its density is 0.0081 g mL−1 at 1 atm. (e) O2 if 6.431 g of it occupies 5 litre at 750 mm. (f) O3 at 20°C and 82 cm Hg. (IIT 1985)
Solution. If T is given always use urms = √(3RT/M). (a) At STP, T = 273 K: urms for O2 = √(3 × 8.314 × 107 × 273/32) = 4.61 × 104 cm sec−1. Now uMP = urms × 0.816 ...(1) and uAV = urms × 0.9213 ...(2); so uMP = 3.76 × 104 cm sec−1 and uAV = 4.25 × 104 cm sec−1. (b) urms of C2H6 (M = 30, T = 27 + 273 = 300 K) = √(3 × 8.314 × 107 × 300/30) = 4.99 × 104 cm sec−1; by Eq. (1) uMP = 4.07 × 104 cm sec−1; by Eq. (2) uAV = 4.60 × 104 cm sec−1. (c) urms of O2 at T = 17 + 273 = 290 K = √(3 × 8.314 × 107 × 290/32) = 4.75 × 104 cm sec−1; uMP = 3.88 × 104 cm sec−1; uAV = 4.38 × 104 cm sec−1. (d) Density of O2 = 0.0081 g mL−1 = 0.0081 g cm−3 and P = 1 atm = 1 × 76 × 13.6 × 981 dyne cm−2: urms = √(3P/d) = √(3 × 1 × 76 × 13.6 × 981/0.0081) = 1.94 × 104 cm sec−1; uMP = 1.58 × 104 cm sec−1; uAV = 1.78 × 104 cm sec−1. (e) For O2: w = 6.431 g, V = 5 litre, P = 750 mm = 75 cm = 75/76 atm. PV = (w/M)RT: (75/76) × 5 = (6.431/32) × 0.0821 × T, so T = 299.05 K. urms = √(3 × 8.314 × 107 × 299.05/32) = 4.83 × 104 cm sec−1; uMP = 3.94 × 104 cm sec−1; uAV = 4.45 × 104 cm sec−1. (f) For O3: T = 20 + 273 = 293 K: urms = √(3 × 8.314 × 107 × 293/48) = 3.9 × 104 cm sec−1; uMP = 3.18 × 104 cm sec−1; uAV = 3.59 × 104 cm sec−1.
Teacher's Note: Use urms = √(3RT/M); uMP, uAV are fixed multiples; with density use √(3P/d).
Exam Note: Use R = 8.314 × 107 erg for speeds in cm/s.
Question 95. The average speed at T1 K and the most probable speed at T2 K of CO2 gas is 9 × 104 cm sec−1. Calculate the value of T1 and T2. (IIT 1990)
Solution. uAV = √(8RT/πM), uMP = √(2RT/M). Average speed at T1 K = most probable speed at T2 K for CO2: √(8RT1/πM) = √(2RT2/M), so T1/T2 = π/4 ...(1). Also for CO2 uMP = √(2RT2/M) = 9 × 104: √(2 × 8.314 × 107 × T2/44) = 9 × 104, so T2 = 2143.37 K. By Eq. (1), T1 = 1683.4 K (the book prints 1684.0 K, a rounding difference).
Teacher's Note: Equate the two speed formulas to get T1/T2 = π/4, then find T2 from the given speed.
Exam Note: Use M = 44 and R in erg units for cm/s.
Question 96. The average speed of an ideal gas molecule at 27°C is 0.3 m sec−1. Calculate average speed at 927°C.
Solution. uAV = √(8RT/πM). Given uAV = 0.3 m sec−1 at 300 K: u1 = 0.3 = √(8R × 300/πM) ...(1). At T = 273 + 927 = 1200 K: u2 = √(8R × 1200/πM) ...(2). Dividing: u2/0.3 = √(1200/300), so u2 = 0.6 m sec−1.
Teacher's Note: Average speed varies as √T; quadrupling T doubles the speed.
Exam Note: Convert 927°C to 1200 K; speed ∝ √T.
Question 97. Relate the three speeds with each other, i.e., urms, uMP and uAV.
Solution. urms = √(3RT/M), uAV = √(8RT/πM), uMP = √(2RT/M). Therefore urms : uAV : uMP = 1 : √(8/3π) : √(2/3) = 1 : 0.9213 : 0.816. Also uMP : uAV : urms = 1 : √(4/π) : √(3/2) = 1 : 1.128 : 1.224.
Teacher's Note: All three speeds scale as √(RT/M); only the numerical constants (2, 8/π, 3) differ.
Exam Note: Memorise: uMP < uAV < urms.
Question 98. The average velocity of gas molecules is 400 m/sec. Calculate its rms velocity at the same temperature. (IIT 2003)
Solution. uAV = √(8RT/πM) ...(1); urms = √(3RT/M) ...(2). By Eqs. (1) and (2): urms = uAV × √(3π/8) = 400 × √(3 × 3.14/8) = 434 m/sec.
Teacher's Note: Ratio urms/uAV = √(3π/8) ≈ 1.085, independent of gas and temperature.
Exam Note: Multiply 400 by √(3π/8) = 1.085.
Question 99. The mass of molecule A is twice the mass of molecule B. The rms speed of A is twice the rms speed of B. If two samples of A and B contain same no. of molecules, what will be the ratio of P of two samples in separate containers of equal volume?
Solution. Given mA = 2mB, so molar mass of A = 2 × molar mass of B ...(1). Given urms of A = 2 × urms of B ...(2). The number of molecules of A = number of molecules of B ...(3). For gas A: PAVA = (1/3)MAurms,A2; for gas B: PBVB = (1/3)MBurms,B2. So PAVA/PBVB = (MA/MB) × (uA2/uB2) ...(4). Given VA = VB ...(5). By Eqs. (1), (2), (4) and (5): PA/PB = 2 × (2)2 = 8, so PA : PB = 8 : 1 (PA = 8PB).
Teacher's Note: Kinetic equation: P ∝ (mass)(speed)2 for equal molecules in equal volume.
Exam Note: Speed ratio enters squared: 2 × 4 = 8.
Question 100. Under 3 atm, 12.5 litre of a certain gas weigh 15 g, calculate the average speed of gaseous molecules.
Solution. For the gas PV = (w/M)RT: 3 × 12.5 = (15/M) × 0.0821 × T, so T/M = 30.45. Now uAV = √(8RT/πM) = √(8 × 8.314 × 107 × 30.4 × 7/22) = 8.028 × 104 cm sec−1.
Teacher's Note: Only the ratio T/M is needed: it comes from the gas equation and feeds the speed formula.
Exam Note: Only T/M is needed, not T and M separately.
Question 101. Calculate the pressure exerted by 1023 gas molecules, each of mass 10−22 g in a container of volume one litre. The rms speed is 105 cm sec−1.
Solution. Given n = 1023, m = 10−22 g, V = 1 litre = 103 cm3, urms = 105 cm sec−1. PV = (1/3)mnurms2: P × 103 = (1/3) × 10−22 × 1023 × (105)2, so P = 3.3 × 107 dyne cm−2.
Teacher's Note: Kinetic gas equation PV = (1/3)mnu2 in CGS units gives pressure in dyne cm−2.
Exam Note: Keep CGS units throughout: g, cm, dyne.
Question 102. Calculate the root mean square speed, total and average translational kinetic energy in joule of the molecules in 8 g methane at 27°C.
Solution. T = 27 + 273 = 300 K, R = 8.314 × 107 erg. urms for CH4 = √(3RT/M) = √(3 × 8.314 × 107 × 300/16) = 6.84 × 104 cm sec−1. Now, K.E./mol CH4 = (1/2)Mu2 = (1/2) × 16 × (6.84 × 104)2 = 374.28 × 108 erg mol−1. K.E. for 1/2 mole CH4 (8 g) = 374.28 × 108/2 erg = 374.28 × 108/(2 × 107) joule = 1871.42 joule. Average kinetic energy = (K.E./mol)/Av. No. = 374.28 × 108/(6.023 × 1023) = 62.14 × 10−15 erg = 62.14 × 10−22 joule.
Teacher's Note: Total translational energy of n mol is (3/2)nRT; per molecule it is (3/2)kT.
Exam Note: 8 g of CH4 is 0.5 mol, so halve the molar KE.
JEE Mathematics: P Bahadur Solutions for P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 1
Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 1
Access the complete chapter-wise PDF for P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 1. These structured P Bahadur Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Mastering Core Concepts with P Bahadur Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your JEE Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.