Step-by-Step P Bahadur Solutions for JEE Chemistry Chapter 01 Gaseous State
Review structured textbook solutions for JEE Chemistry Chapter 01 Gaseous State prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 01 Gaseous State Textbook Solutions PDF
View or download the dedicated Chapter 01 Gaseous State solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Gaseous State: Solutions and Practice Problems (Part 2)
Subjective Problems: Solutions (continued)
Question 103. (Question statement is not printed in the source book; solution given below.)
Solution. Average kinetic energy per molecule = (K.E./mol)/(Av. No.) = 3RT/(2N) = (3/2)kT.
k = (5.621×10−14 × 2)/(3 × 273) (T = 273 K) = 1.372×10−16 erg molecule−1 K−1.
Avogadro's number N = R/k = (8.314×107)/(1.372×10−16) = 6.059×1023.
Teacher's Note: Per-molecule kinetic energy is (3/2)kT, so k = KE/(1.5T); then N = R/k links macroscopic and molecular constants.
Exam Note: Keep erg and J units consistent.
Question 104. (Question statement is not printed in the source book; solution given below.)
Solution. Given P = 7.57×103 N m−2, V = 1 litre = 10−3 m3, R = 8.314 J, n = (2×1021)/(6.023×1023) mole.
PV = nRT: 7.57×103 × 10−3 = (2×1021/6.023×1023) × 8.314 × T, so T = 274.2 K.
urms = √(3RT/M) = √(3 × 8.314 × 274.2 / (28×10−3)) (M in kg) = 494.22 m s−1.
Now uMP/urms = 0.82, so uMP = 405.26 m s−1.
Teacher's Note: Get T from PV = nRT using moles; then u_rms with M in kg and u_mp/u_rms = 0.82.
Exam Note: Use SI: P in Pa, M in kg mol⁻¹.
Question 105. (Question statement is not printed in the source book; solution given below.)
Solution. Let the urms of He and SO2 be u1 and u2 respectively.
(i) For He: u1 = √(3RT/4); for SO2: u2 = √(3RT/64) (temperature is same). ∴ u1/u2 = 4.
(ii) Given urms of SO2 = ½ urms of He: √(3RT/64) = ½ √(3R×300/4) (T = 300 K for He) ∴ T = 1200 K.
(iii) Since speed is independent of P and V terms, changing volume has no effect on speed.
(iv) Since urms is independent of the number of molecules, changing the number of molecules has no effect on speed.
Teacher's Note: u_rms depends only on T and M, not on P, V or amount of gas; ratio of speeds is √(M₂/M₁).
Exam Note: State clearly that P, V and n do not appear in u_rms.
Question 106. (Question statement is not printed in the source book; solution given below.)
Solution. Let mass of mist particle be m; then K.E. of this particle = ½mu², where u is its rms velocity.
Also K.E. per molecule = 3RT/(2×N). Therefore ½mu² = 3RT/(2×N), so u = √(3RT/(N m)).
m = 10−12 g; R = 8.314×107 erg; T = 300 K:
u = √(3 × 8.314×107 × 300 / (6.023×1023 × 10−12)) = 0.35 cm sec−1.
Teacher's Note: A mist particle has the same average K.E. as a gas molecule at that T; speed follows from mass.
Exam Note: Use g with erg (CGS) consistently.
Question 107. (Question statement is not printed in the source book; solution given below.)
Solution. For H2: uAV = √(8RT/(πM)) = √(8R×300/(π×2)) (T = 300 K, molar mass = 2).
For C2H6: uAV = √(8R×900/(π×30)) (T = 900 K, molar mass = 30).
∴ uAV(H2)/uAV(C2H6) = √((300×30)/(900×2)) = 2.237 : 1.
Teacher's Note: Average speed ∝ √(T/M); take the ratio so R and π cancel.
Exam Note: Ratio problems: cancel constants, substitute T and M.
Question 108. (Question statement is not printed in the source book; solution given below.)
Solution. (a) Volume of 1 molecule = (4/3)πr³ (spherical shape), r = 150 pm = 150×10−10 cm.
∴ V1 = (4/3) × (22/7) × [150×10−10]³ = 1.41×10−23 cm³.
(b) Volume occupied by N molecules = N × V1 = 6.023×1023 × 1.41×10−23 = 8.49 cm³ per mol. Also volume of 1 mole of N2 = 22400 cm³ at STP.
Empty space = 22400 − 8.49 = 22391.51, or % empty space = (22391.51/22400) × 100 = 99.96%.
(c) 99.96% is empty space, which accounts for the fact that most of the space in the container is empty in which a molecule can move. Also it suggests that this accounts for compressibility of gases to higher extent.
Teacher's Note: Compare true molecular volume with molar volume at STP to show gases are almost all empty space.
Exam Note: Convert pm to cm before cubing the radius.
Question 109. (Question statement is not printed in the source book; solution given below.)
Solution. PV = nRT ...(1) for ideal gas; PV² = K ...(2) additional law, or PV = K/V ...(3).
By Eqs. (1) and (3): K/V = nRT. Initially K/V = nRT; finally K/(2V) = nRT1.
∴ 2 = T/T1, or T1 = T/2.
Teacher's Note: With PV² = K, PV = K/V, so doubling volume halves PV and hence the temperature.
Exam Note: Divide the two states; n, K and V cancel.
Question 110. (Question statement is not printed in the source book; solution given below.)
Solution. Let P, V represent pressure and volume at temperature T: PV = nRT ...(1).
At V = V0, P = P°/(1 + (1)²) = P°/2 [since P = P°/(1 + (V/V0)²)].
By Eq. (1), (P°/2) × V0 = nRT, ∴ T = P°V°/(2R) (n = 1).
Teacher's Note: Substitute V = V₀ into the given P(V) relation, then apply PV = nRT for one mole.
Exam Note: Show substitution step before applying PV = nRT.
Question 111. (Question statement is not printed in the source book; solution given below.)
Solution. Pressure correction = n²a/V² = (4.4)²×3.6/(44)²×1×1 = 0.036 atm, where n = 4.4/44.
Volume correction = nb = (4.4/44) × 0.04 = 0.004 litre.
Teacher's Note: Moles first (mass/molar mass), then van der Waals corrections n²a/V² and nb.
Exam Note: Give units: atm and litre.
Question 112. (Question statement is not printed in the source book; solution given below.)
Solution. b = 4N×v [where v is volume of 1 molecule (of steam)].
∴ Volume of 1 mole of steam = b/4 = 0.0305/4 litre = (0.0305/4) × 10³ mL = 7.625 mL.
Also, volume of 1 mole of H2O(l) = 18/0.958 mL. ∴ (Volume of 1 mole steam)/(Volume of 1 mole H2O) = 7.625 × 0.958/18 = 0.4058.
∴ Volume of 1 mole of steam = 40% of volume of 1 mole of H2O.
Teacher's Note: Actual molecular volume is b/4; compare with liquid molar volume from density.
Exam Note: Remember b = 4 × actual volume of N molecules.
Question 113. (Question statement is not printed in the source book; solution given below.)
Solution. For gaseous water, PV = nRT. Volume occupied by 1 mole gaseous water (T = 273 + 100 = 373 K): V = nRT/P = (1 × 0.0821 × 373)/1 = 30.62 litre.
Also volume of 1 mole of liquid water = mass/density = 18/0.958 = 18.79 mL = 18.79×10−3 litre.
Volume percent occupied by water molecules in gaseous state = (18.79×10−3/30.62) × 100 = 0.0614.
Therefore, percentage of free volume = 100 − 0.0614 = 99.9386.
Teacher's Note: Treat liquid volume as the molecular volume and compare it with the gas volume at 373 K.
Exam Note: Use 373 K, not 273 K, for steam at 1 atm.
Question 114. (Question statement is not printed in the source book; solution given below.)
Solution. 6.023×1023 molecules of N2 occupy 22400 cm³, so one molecule occupies 22400/(6.023×1023) cm³, i.e. volume of one molecule of N2 = 3.72×10−20 cm³.
Average distance between two molecules = 2r, and (4/3)πr³ = 3.72×10−20.
∴ r³ = 3.72×10−20 × 3 × 7/(4 × 22), so r = 20.7×10−8 cm.
Thus average distance = 2 × 20.7×10−8 = 41.4×10−8 cm.
Teacher's Note: Volume per molecule at STP is treated as a sphere to estimate the intermolecular distance.
Exam Note: Check the cube-root step carefully.
Question 115. (Question statement is not printed in the source book; solution given below.)
Solution. b = 4 × (volume occupied by the molecules in one mole of gas) = 4 × N × ((4/3)πr³).
With b = 24 cm³ mol−1 (value used in the printed working: 3×24 in the numerator): r = [3×24/(16 × (22/7) × 6.023×1023)]1/3.
Corrected: the bracket equals 2.377×10−24, so r = 1.335×10−8 cm (the book prints 1.355×10−8 cm).
∴ d = 2r = 2 × 1.335×10−8 cm = 2.67 Å (book prints 2.71 Å).
Teacher's Note: Use b = 4N(4/3)πr³ for radius; diameter is twice r.
Exam Note: Compute the cube root carefully; check against Problem 130.
Question 116. (Question statement is not printed in the source book; solution given below.)
Solution. (i) Volume of sphere = (4/3)πr³. Thus volume of one N2 molecule = (4/3) × (22/7) × (2×10−8 cm)³ = 3.35×10−23 cm³ (r = 2×10−10 m = 2×10−8 cm; the book writes the unit loosely).
(ii) Total volume of one mole of gas at STP = 22400 cm³. Also the volume of one mole of gas = N × volume of one molecule = 6.023×1023 × 3.35×10−23 cm³ = 20.2 cm³.
∴ Empty space = 22400 − 20.2 = 22379.8 cm³.
∴ Percentage empty space = (22379.8/22400) × 100 = 99.9%.
[NOTE: This result clearly indicates that particles of gas occupy only a tiny fraction of the total gaseous volume.]
Teacher's Note: Molecular volume times N, subtracted from the 22400 cm³ molar volume, shows gases are mostly empty.
Exam Note: Convert angstrom radius to cm before cubing.
Question 117. (Question statement is not printed in the source book; solution given below.)
Solution. Given n = 5; V = 1 litre; T = 47 + 273 = 320 K; a = 3.592; b = 0.0427.
Van der Waals' equation for n mole: (P + n²a/V²)(V − nb) = nRT.
[P + 25 × 3.592/1][1 − 5 × 0.0427] = 5 × 0.0821 × 320 ∴ P = 77.218 atm.
Also, if gas behaves ideally, then PV = nRT: P × 1 = 5 × 0.0821 × 320 = 131.36 atm.
Teacher's Note: Substitute into the van der Waals equation for 5 mol; real pressure is lower than ideal due to attraction.
Exam Note: Apply n²a and nb, not a and b.
Question 118. (Question statement is not printed in the source book; solution given below.)
Solution. For 1 mole: [P + a/V²][V − b] = RT. If b is negligible, P = RT/V − a/V², or PV² − RTV + a = 0.
The equation is quadratic in V, thus V = [RT ± √(R²T² − 4aP)]/(2P). Since V has one value at given P and T, the discriminant must be zero: R²T² = 4aP.
∴ P = R²T²/(4a) = (0.0821)² × (273)²/(4 × 3.592) = 34.96 atm.
Teacher's Note: One real volume means a zero discriminant of the quadratic in V; that fixes the pressure.
Exam Note: Set discriminant to zero for a single root.
Question 119. (Question statement is not printed in the source book; solution given below.)
Solution. Z = PV/RT = 0.5 ∴ (100 × V)/(0.082 × 273) = 0.5 ∴ V = 0.112 litre.
Now using van der Waals' equation, [P + a/V²][V] = RT (b is negligible): [P + a/V²] = RT/V, so [100 + a/(0.112)²] = (0.082 × 273)/0.112 = 199.88.
∴ a/(0.112)² = 99.88, so a = 1.253 litre² mol−2 atm.
Teacher's Note: Get V from Z = 0.5, then with b neglected solve van der Waals for a.
Exam Note: Neglect b only when the question says so.
Question 120. (Question statement is not printed in the source book; solution given below.)
Solution. Compressibility factor Z = PV/nRT = (40 × 0.4)/(1 × 0.0821 × 300) = 0.65.
Since Z is lesser than 1, and thus nRT > PV. In order to have Z = 1, volume of CO2 must have been more at same P and T, or CO2 is more compressible than ideal gas.
Teacher's Note: Z < 1 means attractive forces dominate, so the gas is more compressible than ideal.
Exam Note: State Z < 1 means attraction dominates.
Question 121. (Question statement is not printed in the source book; solution given below.)
Solution. For real gas PV = Z·nRT = Z·wRT/M. Given compressibility factor Z = 0.927, T = 273 K, P = 100 atm, V = 100 litre (M = 30 used in the printed working).
∴ 100 × 100 = 0.927 × (w/30) × 0.0821 × 273 ∴ w = 14.439×10³ g = 14.439 kg.
Teacher's Note: Use PV = ZnRT with n = w/M to find the mass from the given Z.
Exam Note: Convert g to kg in the final answer.
Question 122. (Question statement is not printed in the source book; solution given below.)
Solution. (a) (i) r(v)/r(O2) = √(M(O2)/M(v)); ∴ 1.33 = √(32/M(v)) ∴ M(v) = 18.1.
(ii) Molar volume at 500 K, V̄ = molar mass/density of 1 mole = (18.1×10−3)/0.36 = 50.3×10−3 m³ (the book prints 50.25×10−3).
(iii) Compression factor Z = PV̄/RT = (101325 × 50.25×10−3)/(8.314 × 500) = 1.225 [P = 101325 N m−2 = 1 atm].
(iv) Repulsive forces operate among molecules since Z > 1.
(b) Average K.E. = (3/2)kT = (3/2) × 1.38×10−23 × 1000 = 2.07×10−20 J/molecule.
Teacher's Note: Graham's law gives M; then Z = PV̄/RT; Z > 1 shows repulsion dominates; average K.E. is 1.5kT.
Exam Note: Rates are inversely proportional to √M.
Question 123. (Question statement is not printed in the source book; solution given below.)
Solution. van der Waals' equation for n mole of gas is [P + n²a/V²][V − nb] = nRT. Given V = 4 litre; P = 11.0 atm; T = 300 K; b = 0.05 litre mol−1; n = 2.
Thus [11 + 2²a/4²][4 − 2 × 0.05] = 2 × 0.082 × 300, so a = 6.46 atm litre² mol−2.
Teacher's Note: Substitute n, V, b, P, T into the van der Waals equation and solve for a.
Exam Note: Use nb and n²a with n = 2.
Question 124. (Question statement is not printed in the source book; solution given below.)
Solution. n = PV/RT = (1 × 5.6)/(0.0821 × 273) = 0.25. Also q = m·S·ΔT = 0.25 × Cv × 10, so 12.5 = 0.25 × Cv × 10 ∴ Cv = 5 calorie.
Also Cp = Cv + R = 5 + 2 = 7 calorie. So γ = Cp/Cv = 7/5 = 1.40. Thus, gas is diatomic.
Teacher's Note: Heat at constant volume gives C_v; add R for C_p; γ = 1.4 identifies a diatomic gas.
Exam Note: R = 2 cal when working in calories.
Question 125. (Question statement is not printed in the source book; solution given below.)
Solution. Given P = 50 atm, V = 25 litre, n = 10, a = 5.46 atm litre² mol−2, b = 0.031 litre mol−1.
[P + n²a/V²][V − nb] = nRT: [50 + 100 × 5.46/625][25 − 10 × 0.031] = 10 × 0.0821 × T ∴ T = 1529.93 K = 1256.93 °C.
Teacher's Note: Apply the van der Waals equation for 10 mol and solve for T; convert K to °C.
Exam Note: Subtract 273 for °C at the end.
Question 126. (Question statement is not printed in the source book; solution given below.)
Solution. We have Z = PV/nRT, ∴ mole of N2 = PV/(ZRT) = (800 × 100)/(1.95 × 0.0821 × 223) = 2240.8.
Teacher's Note: Rearrange Z = PV/nRT for n using the given compressibility factor.
Exam Note: Z multiplies RT in the denominator.
Question 127. (Question statement is not printed in the source book; solution given below.)
Solution. Given Tc = 374 °C = 374 + 273 = 647 K, Pc = 218 atm, Vc = 0.0566 litre mol−1.
b = Vc/3 = 0.0566/3 = 0.0189 litre mol−1.
a = 3PcVc² = 3 × 218 × (0.0566)² = 2.095 litre² atm mol−2.
R = 8PcVc/(3Tc) = (8 × 218 × 0.0566)/(3 × 647) = 0.05086 litre atm K−1 mol−1.
Teacher's Note: Use critical-constant relations: b = Vc/3, a = 3PcVc², R = 8PcVc/3Tc.
Exam Note: Convert Tc to kelvin first.
Question 128. (Question statement is not printed in the source book; solution given below.)
Solution. According to van der Waals' equation [P + a/V²][V − b] = RT, or P = RT/(V − b) − a/V².
Multiply by V: PV = RTV/(V − b) − a/V, or PV = RT[V/(V − b) − a/(VRT)], or PV = RT[(1 − b/V)−1 − a/(VRT)].
Since (1 − b/V)−1 = 1 + b/V + (b/V)² + ...:
PV = RT[1 + b/V + ... − a/(VRT)], so PV = RT[1 + (b − a/RT)(1/V) + ...].
∴ B = b − a/RT.
Teacher's Note: Expand (1 − b/V)⁻¹ binomially and compare with the virial form 1 + B/V.
Exam Note: Keep only terms up to 1/V.
Question 129. (Question statement is not printed in the source book; solution given below.)
Solution. For nA ⇌ [A]n: before association 1, 0; after association 1 − α, α/n.
KC = [An]/[A]n = (α/(nV)) / ((1−α)/V)n = α·Vn−1/(n(1 − α)n).
Since α is small, α/n = KC/Vn−1 ...(1).
Total moles at equilibrium = 1 − α + α/n, so PV = [1 − α + α/n]RT, or PV/RT = 1 − α + α/n = [1 − (n − 1)·α/n].
∴ By Eq. (1), PV/RT = [1 − (n − 1)KC/Vn−1].
Teacher's Note: Association lowers total moles; small α lets α/n be replaced by K_c/V^(n−1).
Exam Note: Use small-α approximation 1 − α ≈ 1.
Question 130. (Question statement is not printed in the source book; solution given below.)
Solution. For real gas [P + a/V²][V − b] = RT, or P[V − b] = RT (neglecting a).
∴ (10.1325×106/101325)[V1 − b] = 0.0821 × 273 (101325 Pa = 1 atm), or 100[V1 − b] = 0.0821 × 273 = 22.41 ...(i)
(101.325×10³/101325)[V2 − b] = 0.0821 × 273, or [V2 − b] = 22.41 ...(ii)
By Eq. (i), V1 = 0.2241 + b ...(iii); by Eq. (ii), V2 = 22.41 + b ...(iv).
By Eqs. (iii) and (iv): V1/V2 = (0.2241 + b)/(22.41 + b), with V1 = 0.011075 V2 given: 0.011075 = ... ∴ b = 0.024 litre mol−1 = 24 cm³ mol−1.
b = 4N × v = 4 × 6.023×1023 × (4/3) × (22/7) × r³; 24 = 4 × 6.023×1023 × (4/3) × (22/7) × r³ ∴ r = 1.33×10−8 cm.
Teacher's Note: Neglect a, use P(V−b)=RT at both pressures and the volume ratio to get b, then r.
Exam Note: Convert pressure to atm, b to cm³.
Question 131. (Question statement is not printed in the source book; solution given below.)
Solution. (a) Given P(V − b) = nRT: 1(25 − b) = 1 × 0.0821 × 273 (V = 25 dm³ = 25 litre) ∴ b = 2.586 litre.
Diameter of molecule d = 2r. We have b = 4 × N × volume of molecule = 4 × 6.023×1023 × (4/3) × (22/7) × (d/2)³.
Corrected: b = 2.586 litre = 2586 cm³ (the book puts 2.586 straight into the cm³ equation and prints d = 1.270×10−8 cm). Then (d/2)³ = 2586/(1.0096×1025), so d = 1.270×10−7 cm.
(b) Given P(V − b) = nRT, PV − Pb = nRT, so PV/nRT − Pb/nRT = 1, i.e. Z − Pb/(nRT) = 1 (since PV/nRT = Z, the compressibility factor).
Z = 1 + Pb/(nRT) = 1 + (1 × 2.586)/(1 × 0.0821 × 273) = 1.115.
Teacher's Note: b must be in cm³ before relating to diameter; Z = 1 + Pb/RT when a is neglected.
Exam Note: Convert litres to cm³ first.
Question 132. (Question statement is not printed in the source book; solution given below.)
Solution. TC = 8a/(27Rb) and PC = a/(27b²). ∴ TC/PC = 8b/R, or b = RTC/(8PC).
b = (0.0821 × 303)/(8 × 72) = 0.043 litre mol−1.
a = 27PC × b² = 27 × 72 × (0.043)² = 3.59 litre² atm mol−2.
Teacher's Note: Eliminate a between Tc and Pc to get b = RTc/8Pc, then back-substitute for a.
Exam Note: Use Tc in kelvin, Pc in atm.
Question 133. (Question statement is not printed in the source book; solution given below.)
Solution. For O2: Tr1 = T/TC1 = 300/155. For N2: Tr2 = T/TC2 = 300/126.
∴ Tr1/Tr2 = 126/155 = 0.812.
Teacher's Note: Reduced temperature is T/Tc; same T gives the ratio as inverse ratio of Tc.
Exam Note: Reduced ratio = Tc(N₂)/Tc(O₂) here.
Question 134. (Question statement is not printed in the source book; solution given below.)
Solution. According to law of corresponding state [Pr + 3/Vr²][3Vr − 1] = 8Tr:
[Pr + 3/(0.4)²][3 × 0.4 − 1] = 8 × 0.7277 ∴ Pr = 10.35 (more exactly 29.108 − 18.75 = 10.36; the book prints 10.350).
Teacher's Note: Substitute Vr and Tr into the reduced van der Waals equation and solve for Pr.
Exam Note: Reduced equation: (Pr+3/Vr²)(3Vr−1)=8Tr.
Question 135. (Question statement is not printed in the source book; solution given below.)
Solution. Inversion temperature, Ti = 2a/(R·b) = (2 × 0.246)/(0.0821 × 0.0267) = 224.4 K.
Boyle temperature, Tb = a/(R·b) = 0.246/(0.0821 × 0.0267) = 112.2 K.
Teacher's Note: Ti = 2a/Rb and TB = a/Rb; Ti is exactly twice TB.
Exam Note: Quote both formulas before substituting.
Question 136. (Question statement is not printed in the source book; solution given below.)
Solution. Let pressure of gas left in vessel after I operation be P1. Let n1 mole be removed from vessel after I operation. Let n mole be present initially.
Initial state PV = nRT ...(i). ∴ P1V = (n − n1)RT ...(ii), so P1V = nRT − n1RT, P1V = PV − n1RT ...(iii).
The n1 mole taken out has volume v at pressure P1: P1v = n1RT ...(iv).
By Eqs. (iii) and (iv): P1V = PV − P1v, or P1 = P[V/(V + v)] ...(v).
Similarly, for II operation: P2 = P1[V/(V + v)] = P[V/(V + v)]². Thus, for n operations Pn = P[V/(V + v)]n.
Teacher's Note: Each stroke removes a fixed volume v at current pressure, so pressure multiplies by V/(V+v) each time.
Exam Note: Spot the geometric-progression pattern.
Question 137. (Question statement is not printed in the source book; solution given below.)
Solution. For real gases, van der Waals' equation for one mole is [P + a/Vm²][Vm − b] = RT, or PVm − Pb + a/Vm − ab/Vm² = RT ...(1)
For the intercept of PVm vs. P graph at the y-axis, P = 0 and thus Vm → ∞. Thus, neglecting the a/Vm and ab/Vm² terms in Eq. (1): PVm = Pb + RT ...(2)
Thus, a graph between PVm vs. P represents a straight line equation (y = mx + c), with slope b and intercept RT.
Teacher's Note: At vanishing pressure the a-terms vanish, leaving PV_m = RT + Pb, a straight line with intercept RT.
Exam Note: Identify y = mx + c: slope b, intercept RT.
Question 138. (Question statement is not printed in the source book; solution given below.)
Solution. Mole of He = 1/4. Mole of O2 = 4/32 = 1/8. Since urms = √(3RT/M):
For O2: 1000 = √(3 × 8.314 × T/(32×10−3)) [MO2 = 32×10−3 kg], ∴ TO2 = 1283.0 K.
For He: 1000 = √(3 × 8.314 × T/(4×10−3)) [MHe = 4×10−3 kg], THe = 160.37 K.
∴ K.E. per 1/4 mole He = (3/2) × (1/4) × 8.314 × 160.3 = 500 J. K.E. per 1/8 mole O2 = (3/2) × (1/8) × 8.314 × 1283.0 = 2000.036 J.
At thermal equilibrium temperature (T) becomes constant as O2 molecules provide heat energy to He molecules. Heat is expressed as n × cv × ΔT (cv = (3/2)R for He and (5/2)R for O2).
Heat given by O2 = heat taken up by He: (1/8) × (5/2)R × (1283 − T) = (1/4) × (3/2)R × (T − 160.37).
∴ 5(1283 − T) = 2 × 3 (T − 160.37); 6415 − 5T = 6T − 962.22; ∴ T = 670.7 K.
Thus urms for O2 = √(3 × 8.314 × 670.7/(32×10−3)) = 723 m/s and urms for He = √(3 × 8.314 × 670.7/(4×10−3)) = 2045 m/s.
Teacher's Note: Get initial temperatures from u_rms, then equate heat lost by O₂ to heat gained by He.
Exam Note: Energy balance with C_v = 3R/2 and 5R/2.
Question 139. (Question statement is not printed in the source book; solution given below.)
Solution. According to Maxwell's molecular speed distribution: (a) The number of molecules of a given gas having their speed near to uMP increases with temperature. (b) The number of molecules having their speed near to uMP decreases with increase in molar mass for gases at constant temperature. (c) The number of molecules having their speed near to uMP increases with increase in uMP.
Also n ∝ uMP (as printed), ∴ n1 ∝ √(2RT1/M1), n2 ∝ √(2RT2/M2). Since M1 = M2, n1/n2 = √(T1/T2).
T2 = 300, n1 = n2/2 ∴ 1/2 = √(T/300), so T = 75 K.
(The question statement is not printed in the source book; the above is the printed solution. Flagged for human check: physically the fraction of molecules near uMP falls as T rises.)
Teacher's Note: The book takes the number near u_mp proportional to u_mp, giving n₁/n₂ = √(T₁/T₂) and T = 75 K.
Exam Note: Follow the book's proportionality to get 75 K.
Question 140. (Question statement is not printed in the source book; solution given below.)
Solution. According to Maxwell's molecular speed distribution: ng/Σng ∝ 1/urms. ∴ urms ∝ Σng/ng ∝ N/ng (1 mole of both gases).
urms Ar ∝ N/nAr, urms He ∝ N/nHe. ∴ nHe/nAr = urms Ar/urms He = 467/1477 = 0.316.
(The question statement is not printed in the source book; the solution given is as printed.)
Teacher's Note: Number of molecules near a given speed is taken inversely proportional to u_rms, so the ratio is u_Ar/u_He.
Exam Note: Ratio = u_rms(Ar)/u_rms(He) = 467/1477.
Single Integer Answer Problems
Single Integer Question 1. A container having 3 mole of ideal gas occupies 60 litres at pressure P and temperature T. If 0.1 mole of gas is introduced at same P and T in container the change in volume will be ...... litre.
Solution. At constant P and T, V ∝ n: V2 = 60 × 3.1/3 = 62 L, so ΔV = 2 L.
Answer (from key): Two (2 litre).
Teacher's Note: At fixed P and T, volume is proportional to moles, so added 0.1 mol adds 2 L.
Exam Note: Use V ∝ n; subtract to get change.
Single Integer Question 2. An ideal gas on heating from 100 K to 109 K shows an increase by a% in its volume at constant P. The value of a is ....
Solution. At constant P, V ∝ T: increase = (109 − 100)/100 × 100 = 9%.
Answer (from key): Nine (a = 9).
Teacher's Note: Charles' law: percentage rise in volume equals percentage rise in absolute temperature.
Exam Note: Use kelvin; V ∝ T at constant P.
Single Integer Question 3. The ratio of inversion temperature and Boyle's temperature for a real gas is ......
Solution. Ti = 2a/Rb and TB = a/Rb, so Ti/TB = 2.
Answer (from key): Two (2).
Teacher's Note: Inversion temperature 2a/Rb is exactly double Boyle temperature a/Rb for a van der Waals gas.
Exam Note: Quote both formulas, then divide.
Single Integer Question 4. The specific heat of a gas are 0.125 and 0.075 cal/g. The 1/10th value of its molar mass is ......
Solution. Cp − Cv = R/M: 0.125 − 0.075 = 0.05 = 2/M (R = 2 cal), so M = 40 g mol−1; M/10 = 4.
Answer (from key): Four (4).
Teacher's Note: Mayer's relation per gram: cp − cv = R/M with R ≈ 2 cal mol⁻¹ K⁻¹ gives M = 40.
Exam Note: Use R = 2 cal for specific heats in calories.
Single Integer Question 5. A bulb is having ideal gas at 27°C. On heating the bulb to 227°C, 2 litre of gas measured at 227°C is expelled out. The volume of bulb in litre is ......
Solution. Let bulb volume V (constant). At 300 K the gas fills V; at 500 K the same gas would be V × 500/300, so V × 500/300 − V = 2 gives V(2/3) = 2 and V = 3 L.
Answer (from key): Three (3 litre).
Teacher's Note: Gas expelled at the higher temperature equals the extra volume the original gas would occupy.
Exam Note: Apply V₁/T₁ = V₂/T₂ with expelled volume.
Single Integer Question 6. The mass of molecule A is twice the mass of molecule B. The rms speed of A is twice the rms speed of B. If two samples of A and B contain same number of molecule, the ratio of pressure of gas samples of A and B in separate containers of equal volume is ......
Solution. urms = √(3RT/M): uA/uB = √((TA/TB)(MB/MA)) = 2, so 4 = (TA/TB)(1/2), TA/TB = 8. For equal n and V, P ∝ T, so PA/PB = 8.
Answer (from key): Eight (8).
Teacher's Note: Speed ratio fixes the temperature ratio; equal moles and volume make pressure proportional to T.
Exam Note: Square the speed ratio, include mass ratio.
Single Integer Question 7. Molar mass of air is 28.80 g mol−1. The volume of N2 (in mL) in 10 mL of sample of this air is ......
Solution. Let mole fraction of N2 = x (air taken as N2 and O2): 28x + 32(1 − x) = 28.8, so x = 0.8. Volume of N2 = 0.8 × 10 = 8 mL.
Answer (from key): Eight (8 mL).
Teacher's Note: Mean molar mass fixes the N₂ mole fraction, which equals volume fraction for ideal gases.
Exam Note: Volume fraction equals mole fraction.
Single Integer Question 8. A cylinder containing 5 litre of O2 at 25°C was leaking. When the leakage was detected and checked, the pressure inside cylinder was reduced from 8 atm to 2 atm. The ratio of mass of O2 initially present to that left after leakage is equal to ......
Solution. V and T are constant, so mass ∝ P: minitial/mleft = 8/2 = 4.
Answer (from key): Four (4).
Teacher's Note: Fixed V and T make the amount of gas proportional to pressure.
Exam Note: Mass ratio equals pressure ratio here.
Single Integer Question 9. 16 mL of He gas effuses through a pin hole in 4 sec from a container having PHe equal to 1 atm. If same container is filled with CH4 having pressure 2 atm, how much volume (in mL) of CH4 will be leaked through same pin hole in 2 sec?
Solution. Rate ∝ P/√M. Rate of He = 16/4 = 4 mL/s. Rate of CH4 = 4 × (2/1) × √(4/16) = 4 mL/s. In 2 s: 8 mL.
Answer (from key): Eight (8 mL).
Teacher's Note: Effusion rate scales with pressure and inversely with √M; compare against the He benchmark.
Exam Note: Include the pressure factor, then multiply by time.
Single Integer Question 10. Urms of CH4 at T K is 6 times of Ump of SO2 at T1 K. The temperature of CH4 gas is ...... times of SO2.
Solution. √(3RT/16) = 6√(2RT1/64): 3T/16 = 36 × 2T1/64 = 1.125T1, so T = 6T1.
Answer (from key): Six (6).
Teacher's Note: Equate √(3T/16) to 6√(2T₁/64) and square; R cancels.
Exam Note: Remember u_mp = √(2RT/M).
Single Integer Question 11. Root mean square speed of a gas is 5 m s−1. If some molecules out of 10 molecules in all are moving with 7 m s−1 and rest all the molecules moving with 3 m sec−1, then number of molecules moving with higher speed is ......
Solution. urms² = 25 = [n(49) + (10 − n)(9)]/10, so 250 = 40n + 90, giving n = 4.
Answer (from key): Four (4).
Teacher's Note: u_rms is the root of the mean of squared speeds, which gives the count at 7 m/s.
Exam Note: Square speeds before averaging.
Single Integer Question 12. A metallic carbonyl M(CO)x is in gaseous state. The rate of diffusion of CH4 is 3.31 time faster than this gas under identical conditions. If at. mass of metal is 63.29, the closest integer value of X is ......
Solution. rCH4/r = √(M/16) = 3.31, so M = 16 × 3.31² = 175.3. Then 63.29 + 28x = 175.3, x = 4.0.
Answer (from key): Four (4).
Teacher's Note: Graham's law gives molar mass of the carbonyl; subtract the metal and divide by 28 per CO.
Exam Note: Each CO contributes 28 g mol⁻¹.
Single Integer Question 13. The ratio of rate of diffusion of He (at 4 atm) and CH4 (1 atm) through same pin hole at constant temperature is ......
Solution. Rate ∝ P/√M: rHe/rCH4 = (4/1) × √(16/4) = 8.
Answer (from key): Eight (8).
Teacher's Note: Rate depends on pressure and 1/√M, so both factors multiply: 4 × 2.
Exam Note: Include pressure factor in Graham's law.
Single Integer Question 14. 5 mL of a liquid [V.P. = 8 cm at 400 K] having density 0.02 g/mL is placed in a container of 4 litre. It is connected to another empty container of 4 litre at 400 K. The resultant pressure of liquid shown is ......
Solution. Mass of liquid = 5 × 0.02 = 0.1 g. At V.P. = 8 cm Hg (0.105 atm) in 8 L, the vapour needed is 0.0256 mol, far more than 0.1 g of any ordinary liquid supplies, so the liquid does not evaporate completely and the vapour stays saturated. Resultant pressure = vapour pressure = 8 cm (of Hg).
Answer (from key): Eight (8 cm Hg).
Teacher's Note: Liquid remains in equilibrium, so pressure is the saturated vapour pressure, independent of volume.
Exam Note: Unevaporated liquid fixes pressure at V.P.
Single Integer Question 15. A gas having molecular formula On. If its vapour density is 24. The value of n is ......
Solution. Molar mass = 2 × vapour density = 48; 16n = 48, so n = 3 (ozone).
Answer (from key): Three (3).
Teacher's Note: Molar mass is twice vapour density; divide by 16 for atoms per molecule.
Exam Note: M = 2 × V.D.
Single Integer Question 16. The percentage decrease in volume of gas at constant temperature if percentage increase in pressure is 5.26, is ......
Solution. P2 = 1.0526P1; V2 = V1/1.0526 = 0.95V1, i.e. decrease = 5%.
Answer (from key): Five (5%).
Teacher's Note: Boyle's law: a 5.26% rise in P gives V₂ = V₁/1.0526, a 5% fall, not 5.26%.
Exam Note: Percentage changes are not equal; divide by 1.0526.
Single Integer Question 17. An ideal gas on heating shows a rise in temperature by 8% at constant pressure. The % increase in volume of gas is ......
Solution. At constant P, V ∝ T, so volume also rises by 8%.
Answer (from key): Eight (8%).
Teacher's Note: Charles' law: fractional change in volume equals fractional change in absolute temperature.
Exam Note: V ∝ T at constant P.
Single Integer Question 18. The density of vapours of a substance at 1 atm P and 500 K is 0.3 kg m−3. The vapours effuse 0.4216 times faster than O2 through a pin hole under identical conditions. If R = 0.08 litre atm K−1 mol−1. The molar volume of gas is a × 102 litre. The value of a is ....
Solution. r/rO2 = √(32/M) = 0.4216, so M = 32/0.17775 = 180 g mol−1. Molar volume = M/density = 0.180 kg/0.3 kg m−3 = 0.6 m³ = 600 L = 6 × 102 L, so a = 6.
Answer (from key): Six (a = 6).
Teacher's Note: Graham's law gives M from the rate ratio; molar volume is M divided by density.
Exam Note: Convert 0.6 m³ to litres (600 L).
Single Integer Question 19. What mass of N2 should be mixed with 11 g of CO to give a mean molar mass of mixture equal to 36 ?
Solution. As printed (CO and N2 both have M = 28) no mixture can reach 36. Corrected: the intended gas is CO2 (M = 44): 11 g CO2 = 0.25 mol. For mean molar mass 36 with N2 (28), mole fractions are equal (36 = (44 + 28)/2), so n(N2) = 0.25 mol = 7 g.
Answer (from key): Seven (7 g), matching the key.
Teacher's Note: Mean molar mass 36 is the midpoint of 28 and 44, so equal moles of N₂ and CO₂ are needed.
Exam Note: Midpoint of 28 and 44 means equal moles.
Single Integer Question 20. A flask of capacity 5 litre containing air is heated from 27°C to 227°C. The volume (in litre) of air left in flask on heating is ....
Solution. The flask volume is fixed; the air that remains in an open flask occupies the full 5 L at the final temperature.
Answer (from key): Five (5 litre).
Teacher's Note: A gas fills its container; the air left after heating occupies the full flask volume.
Exam Note: Remaining gas fills the whole 5 L flask.
Single Integer Question 21. A flask of capacity 10 litre containing air is heated from 27°C to 227°C. The ratio of mole of air present at 27°C to mole present at 227°C is ....
Solution. At constant P and V, n ∝ 1/T: n27/n227 = 500/300 = 1.67, i.e. Two to the nearest integer (the key gives Two).
Answer (from key): Two (≈1.67).
Teacher's Note: Open flask at constant P and V: moles inversely proportional to absolute temperature, 500/300.
Exam Note: Ratio = T₂/T₁ = 500/300.
Single Integer Question 22. w1 g of gas A and w2 g of gas B shows a mixture of molar mass 72. This (w1 + w2) g mixture is placed in a container of volume V litre at 1 atm and 300 K. The density of mixture at these conditions is ..... kg m−3. (R = 0.08 litre-atm K−1 mol−1)
Solution. d = PM/RT = (1 × 72)/(0.08 × 300) = 3 g/L = 3 kg m−3.
Answer (from key): Three (3 kg m⁻³).
Teacher's Note: Density of an ideal gas mixture is PM/RT with the mean molar mass; g/L equals kg/m³.
Exam Note: Mean M of mixture goes into d = PM/RT.
Single Integer Question 23. A certain quantity of gas occupies 960 litre when collected over water at 300 K and 760 mm pressure. However the same quantity of dry gas occupies 608 litre at 2 atm and 400 K. The number of mole of water vapours present in wet gas is (R = 0.08 litre atm K−1 mol−1)....
Solution. ndry = (2 × 608)/(0.08 × 400) = 38 mol. nwet total = (1 × 960)/(0.08 × 300) = 40 mol. Water vapour = 40 − 38 = 2 mol.
Answer (from key): Two (2 mol).
Teacher's Note: Total moles in wet gas minus moles of dry gas gives the water vapour moles.
Exam Note: Subtract dry-gas moles from total moles.
Single Integer Question 24. 0.75 mole of solid A4 and 2 mole of gaseous O2 are heated to react completely in a sealed bottle to produce gaseous compound A3On. After the compound is formed, the vessel is brought to initial temperature, the pressure is found to half of initial pressure. The value of n is ....
Solution. 0.75 mol A4 = 3 mol A, giving 1 mol A3On, which uses n/2 mol O2. Initial gas = 2 mol (solid A4 contributes none); final gas = 1 + (2 − n/2) = 3 − n/2. Pressure halves: 3 − n/2 = 1, so n = 4.
Answer (from key): Four (4).
Teacher's Note: Only gaseous moles count; solid A₄ exerts negligible pressure, so final gas moles = half of 2.
Exam Note: Count only gaseous moles before and after.
Single Integer Question 25. A graph is plotted for a van der Waals' gas between PVm vs P leading to an intercept of 22.16 litre-atm. The temperature of gas at which these observations of P and VM were made is ............°C. (R = 0.08 litre atm K−1 mol−1)
Solution. Intercept of PVm vs P is RT: T = 22.16/0.08 = 277 K = 4°C.
Answer (from key): Four (4°C).
Teacher's Note: As P → 0 the van der Waals PV_m approaches RT, so the intercept gives T.
Exam Note: Convert 277 K to °C by subtracting 273.
Single Integer Question 26. Two boxes A and B having their volume ratio 1 : 4 and filled with Ne are inter connected through a narrow tube of negligible volume. Box A is kept at 300 K and box B at 600 K. The ratio of mole of Ne gas in box B to box A is ....
Solution. Pressure is equal in both: n ∝ V/T. nB/nA = (4/600)/(1/300) = 2.
Answer (from key): Two (2).
Teacher's Note: Connected boxes share one pressure, so moles are proportional to V/T.
Exam Note: n ∝ V/T at equal pressure.
Single Integer Question 27. The density of the vapours of a substance at 1 atm and 500 K is 0.36 kg m−3. If molar mass of gas is 18 g mol−1, the molar volume of gas is 5 × 10a m−3. What is the value of a?
Solution. Molar volume = M/density = 0.018 kg/0.36 kg m−3 = 0.05 m³ = 5 × 10−2 m³. Corrected: a = −2 (magnitude 2); the key prints Three, which does not match the data. Flagged for human check.
Answer: Corrected: a = −2 (key prints Three).
Teacher's Note: Molar volume equals molar mass over density; convert grams to kilograms first.
Exam Note: Convert 18 g to 0.018 kg first.
Single Integer Question 28. The root mean square speed of the molecules of diatomic gas is u at temperature T. On increasing the temperature to 2T, the molecules are dissociated. At this time urms of the atoms is au. The value of a is ....
Solution. Before: u = √(3RT/M). After dissociation atoms have mass M/2 at 2T: u′ = √(3R(2T)/(M/2)) = 2√(3RT/M) = 2u. So a = 2.
Answer (from key): Two (a = 2).
Teacher's Note: Doubling T raises u by √2 and halving the mass raises it by another √2.
Exam Note: Atomic mass is half the molecular mass.
Single Integer Question 29. The urms of the molecules of a gas of density 4 kg m−3 and pressure 1.2×105 N m−2 is 3×10a cm/sec. The value of a is ....
Solution. urms = √(3P/d) = √(3 × 1.2×105/4) = √(9×104) = 300 m/s = 3×104 cm/s, so a = 4.
Answer (from key): Four (a = 4).
Teacher's Note: Use u_rms = √(3P/d) in SI units, then convert m/s to cm/s.
Exam Note: Convert 300 m/s to cm/s: 3×10⁴.
Single Integer Question 30. One litre of N2 and 7/8 litre of O2 under identical conditions of P and T are mixed. The mass ratio of N2 and O2 is ....
Solution. Moles ∝ volume: mass N2 : mass O2 = (1 × 28) : (7/8 × 32) = 28 : 28 = 1.
Answer (from key): One (1).
Teacher's Note: Equal P and T mean volumes are proportional to moles; multiply by molar masses.
Exam Note: Mass = moles × molar mass.
Single Integer Question 31. Density of a gas is found 5.46 g/L at 27°C and 2 atm pressure. What will be its density at STP in g/L ?
Solution. d ∝ P/T: dSTP = 5.46 × (1/2) × (300/273) = 3.0 g/L.
Answer (from key): Three (3 g/L).
Teacher's Note: Density is proportional to P/T, so halve for pressure and scale 300/273 for temperature.
Exam Note: Use d₁/d₂ = (P₁T₂)/(P₂T₁).
Single Integer Question 32. A balloon is filled with 2.4×10−3 mole of He at 27°C and 80 mm pressure. An additional amount of He (1.2×10−3 mole) is added at the same temperature showing a rise in volume by 50%. The final pressure of gas in balloon in cm is ....
Solution. n rises from 2.4×10−3 to 3.6×10−3 (×1.5) and V rises by 50% (×1.5) at the same T, so P is unchanged: 80 mm = 8 cm.
Answer (from key): Eight (8 cm).
Teacher's Note: Moles and volume both rise by 50% at fixed T, so pressure stays at 80 mm = 8 cm.
Exam Note: Convert 80 mm to 8 cm for the answer.
Single Integer Question 33. A given sample of gas occupies 40.5 mL at a certain P and T. If mass of the gas is doubled and absolute temperature is lowered to T/3 but pressure increases to 9P, the volume occupied by gas will be ........ mL.
Solution. V ∝ nT/P: V2 = 40.5 × 2 × (1/3)/9 = 3.0 mL.
Answer (from key): Three (3 mL).
Teacher's Note: Combine n, T and P changes: V₂ = V₁ × 2 × (1/3) ÷ 9.
Exam Note: Multiply the three scale factors.
Single Integer Question 34. The composition of air is 20% O2 and 80% N2 by volume. If 10 litre of air is placed at 24.9584 atm and 304 K, the mole of O2 present to closest integer values are....
Solution. n = PV/RT = (24.9584 × 10)/(0.0821 × 304) = 10 mol (since 0.0821 × 304 = 24.9584). O2 = 20% of 10 mol = 2 mol.
Answer (from key): Two (2 mol).
Teacher's Note: Total moles from PV/RT; volume percent equals mole percent, so 20% is O₂.
Exam Note: 20% by volume = 20% by moles.
Single Integer Question 35. A closed container of volume 0.02 m3 consists 28 g of mixture of neon and argon at temperature 27°C and pressure 1×105 N m−2. If atomic mass of Ne and Ar are 20 and 40 respectively, the mass of Ne in mixture in (g) is ....
Solution. n = PV/RT = (1×105 × 0.02)/(8.314 × 300) = 0.802 mol. If x mol Ne: 20x + 40(0.802 − x) = 28, so 32.08 − 20x = 28, x = 0.204 mol. Mass of Ne = 0.204 × 20 = 4.08 g ≈ 4 g.
Answer (from key): Four (4 g).
Teacher's Note: Total moles from the ideal gas equation, then solve the two-component mass balance.
Exam Note: Pa × m³ gives joules; use R = 8.314.
Single Integer Question 36. If pressure of gases at sun is 1.4×109 atm, density is 1.4 g/mL and average molar mass of gaseous mixture is 2, the temperature of the sun is 2.4×10a K. The value of a is ....
Solution. T = PM/(dR) = (1.4×109 × 2)/(1400 g/L × 0.0821) = 2.4×107 K, so a = 7.
Answer (from key): Seven (a = 7).
Teacher's Note: Use PM = dRT with density in g/L (1.4 g/mL = 1400 g/L).
Exam Note: Convert g/mL to g/L (×1000).
Single Integer Question 37. A flask contains a mixture of N2 and CO2 at 1.5 atm and 27°C. If CO2 is removed the pressure falls to 0.5 atm and the mass of the flask drops by 22 g. The mass of N2 in g in flask is ......
Solution. Partial pressure of CO2 = 1.5 − 0.5 = 1.0 atm, for 22 g = 0.5 mol. So at 1 atm the amount is 0.5 mol; N2 at 0.5 atm = 0.25 mol = 7 g.
Answer (from key): Seven (7 g).
Teacher's Note: Partial pressure is proportional to moles at fixed V and T, so N₂ moles are half of CO₂ moles.
Exam Note: Pressure ratio equals mole ratio in the same flask.
Single Integer Question 38. If TA : TB is 2 : 1, the ratio of urms of two gases A and B is 2√2 : 1 respectively. What would be the ratio of the rate of diffusion of two gases A and B under same P and T?
Solution. uA/uB = √((TA/TB)(MB/MA)) = 2√2, so 2 × MB/MA = 8 and MB/MA = 4. Rate ratio at same P and T = √(MB/MA) = 2.
Answer (from key): Two (2).
Teacher's Note: The speed ratio and temperature ratio give the mass ratio; diffusion ratio is its square root.
Exam Note: Square the speed ratio to isolate masses.
Single Integer Question 39. A mixture of H2 and O2 in 2 : 1 volume ratio is allowed to diffuse through a porous partition. The composition ratio of H2 : O2 coming out initially would be ....
Solution. Ratio coming out = (2/1) × √(32/2) = 2 × 4 = 8.
Answer (from key): Eight (8 : 1).
Teacher's Note: Effusing composition = composition in vessel × √(M₂/M₁): the lighter gas is enriched.
Exam Note: Multiply by the rate ratio √16 = 4.
Single Integer Question 40. A cylinder containing 5.0 litre O2 at 25°C was leaking. When the balloon leakage was detected and stopped, there was a change in the pressure of the gas from 3.0 atm to 2.235 atm. The mass of O2 leaked out is ......
Solution. Δn = (ΔP)V/RT = (0.765 × 5)/(0.0821 × 298) = 0.1563 mol; mass = 0.1563 × 32 = 5.0 g.
Answer (from key): Five (5 g).
Teacher's Note: The pressure drop at constant V and T gives moles lost; multiply by 32.
Exam Note: Use T = 298 K.
Single Integer Question 41. By how many times the absolute temperature of a gas would increase when urms of a gas in a container of fixed volume is increased from 5×104 cm sec−1 to 10×104 cm sec−1?
Solution. u ∝ √T, so T ∝ u²: T2/T1 = (10/5)² = 4.
Answer (from key): Four (4 times).
Teacher's Note: u_rms is proportional to √T, so doubling the speed quadruples the absolute temperature.
Exam Note: T ∝ u².
Single Integer Question 42. The ratio of pressure of a gas when urms of a gas in a container is increased from 5×104 cm sec−1 to 10×104 cm sec−1.
Solution. In a fixed container, P ∝ T ∝ u²: P2/P1 = (10/5)² = 4. Corrected: the key prints One, which does not follow from the data (the printed question is incomplete). Flagged for human check.
Answer: Corrected: 4 (key prints One).
Teacher's Note: In a closed container pressure is proportional to u², so doubling the speed gives 4 times the pressure.
Exam Note: P ∝ T ∝ u² at constant V.
Single Integer Question 43. 11.2 litre of a gas at NTP requires 40 cal heat to raise its temperature from 0°C to 10°C. The specific heat at constant volume of gas in calories is ......
Solution. n = 11.2/22.4 = 0.5 mol. q = nCvΔT: 40 = 0.5 × Cv × 10, so Cv = 8 cal K−1 mol−1 (heating taken at constant volume).
Answer (from key): Eight (8 cal).
Teacher's Note: Moles from 11.2 L at STP, then C_v = q/(nΔT).
Exam Note: Assume heating is at constant volume.
Single Integer Question 44. The ratio of root mean square speed of He and SO2 gases placed in two containers of identical volume at same P and T is ......
Solution. urms ∝ 1/√M: uHe/uSO2 = √(64/4) = 4. Corrected: the key prints One, but the rms speeds differ by a factor of 4 (identical volume, P and T only make the mole numbers equal). Flagged for human check.
Answer: Corrected: 4 (key prints One).
Teacher's Note: At the same T, rms speed varies inversely with √M, so the light He is four times faster.
Exam Note: u_rms ∝ 1/√M, so √(64/4) = 4.
Single Integer Question 45. A vessel having movable piston containers has 6.0 mole of a gas at 8.0 atm pressure and volume 5.0 litre. 1.5 mole of gas are withdrawn as well as piston is pulled isothermally onwards to make volume of vessel 10.0 litre. The final pressure of gas will be ......
Solution. P2 = P1 × (n2/n1) × (V1/V2) = 8 × (4.5/6) × (5/10) = 3.0 atm. Corrected: the key prints Four, which does not match the data. Flagged for human check.
Answer: Corrected: 3 atm (key prints Four).
Teacher's Note: At constant T, P is proportional to n/V: 4.5 mol in 10 L gives 3 atm.
Exam Note: P ∝ n/V at constant T.
Single Integer Question 46. The isothermal compressibility factor 'α' for an ideal gas at 0.25 atm pressure is ......
Solution. For an ideal gas α = −(1/V)(∂V/∂P)T = 1/P = 1/0.25 = 4 atm−1.
Answer (from key): Four (4 atm⁻¹).
Teacher's Note: Differentiating V = nRT/P at constant T gives compressibility 1/P.
Exam Note: Compressibility of ideal gas is 1/P.
Single Integer Question 47. The mixture of one mole of monoatomic gas and one mole diatomic gas has molar specific heat at constant volume (in cal) equal to ....
Solution. Cv of mixture = [(3/2)R + (5/2)R]/2 = 2R = 4 cal (R = 2 cal).
Answer (from key): Four (4 cal).
Teacher's Note: Average the molar C_v values of the two gases over equal moles.
Exam Note: Use R = 2 cal.
Single Integer Question 48. The heat used in calorie in doing work during the heating of 1 mole diatomic gas at constant pressure in order to increase the temperature of gas through 1°C.
Solution. Work done at constant P = PΔV = RΔT = R × 1 = 2 cal.
Answer (from key): Two (2 cal).
Teacher's Note: At constant pressure the work part of the heat is nRΔT.
Exam Note: R ≈ 2 cal mol⁻¹ K⁻¹.
Single Integer Question 49. At 400 K, the root mean square speed of a gas (molar mass = 40) is equal to the most probable speed of gas y at 60 K. The molar mass of the gas y is .... (IIT 2009)
Solution. √(3R × 400/40) = √(2R × 60/M): 30 = 120/M, so M = 4.
Answer (from key): Four (4).
Teacher's Note: Equate u_rms of X to u_mp of Y; R cancels, leaving M = 4.
Exam Note: u_mp = √(2RT/M).
Single Integer Question 50. To an evacuated vessel with movable piston under external pressure of 1 atm., 0.1 mol of He and 1.0 mol of an unknown compound (vapour pressure 0.68 atm. at 0°C) are introduced. Considering the ideal gas behaviour, the total volume (in litre) of the gases at 0°C is close to ...... (IIT 2011)
Solution. The liquid compound persists, so its vapour exerts 0.68 atm (saturated vapours do not obey gas laws except Dalton's law). Total pressure = 1 atm, so He exerts 0.32 atm. V = nRT/P = (0.1 × 0.0821 × 273)/0.32 = 7.0 L.
Answer (from key): Seven (7 L).
Teacher's Note: Saturated vapour fixes its own partial pressure; He occupies the rest at 0.32 atm, so V = nRT/P.
Exam Note: Subtract vapour pressure from total pressure.
Objective Problems (One Answer Correct)
Objective Question 1. If XM, XP and XV are mole fraction, pressure fraction and volume fraction respectively of a gaseous mixture, then:
(a) XM = 1/XP = 1/XV (b) 1/XM = XP = 1/XV (c) XM = XP = XV (d) 1/XM = 1/XP = 1/XV
Solution. Correct option: (c). P′ = PT·XM and V′ = VT·XM, where XM is the mole fraction. Also P′/PT = pressure fraction XP and V′/VT = volume fraction XV. ∴ XM = XP = XV.
Teacher's Note: For ideal gases partial pressure and partial volume are proportional to moles, so all three fractions are equal.
Exam Note: Equal fractions hold only for ideal gas mixtures.
Objective Question 2. Virial equation is: PVM = RT[A + B/VM + C/VM2 + ...] where A, B, C are first, second, third ...... virial coefficient respectively. For an ideal gas:
(a) A = unity and B, C are zero (b) A, B, C are all equal to unity (c) A is dependent of temperature (d) All A, B, C depend on temperature
Solution. Correct option: (a). PV = RT for ideal gases.
Teacher's Note: For an ideal gas PV/RT = 1, so only the first coefficient survives.
Exam Note: Ideal gas: A = 1, B = C = 0.
Objective Question 3. Which of the following is intensive property?
(a) P (b) V (c) Mole (d) T
Solution. Correct option: (d). Temperature is mass independent.
Teacher's Note: Intensive properties do not depend on the amount of matter; T is one.
Exam Note: Volume and moles are extensive; T is intensive.
Objective Question 4. Which one is not correct for gaseous state obeying van der Waals' equation?
(a) Compressibility factor at critical temperature ≈ 0.375 (b) For a gas if van der Waals' constant a = 0, TC = 0 (c) Ideal gases do not have critical temperature (d) Gaseous molecules showing H-bonding show minimum deviations from Z ≈ 0.375
Solution. Correct option: (d). Z = PCVC/RTC. Also, gaseous molecules showing H-bonding show maximum deviations in Z due to increase in molecular attractions (e.g., Z for NH3, H2O, CH3OH = 0.22 to 0.24).
Teacher's Note: Hydrogen-bonded gases deviate most from Z = 0.375, not least, so (d) is the false statement.
Exam Note: Read the stem: 'not correct' selects the false option.
Objective Question 5. One mole of a gas is present in a vessel at STP. The volume of container in which neither of the gas molecule is present is:
(a) 22.4 litre (b) 2.24 litre (c) 2.24×10−1 litre (d) 22.3776 litre
Solution. Correct option: (d). Volume of molecules is negligible in comparison to total volume occupied by gas. About 99.9% volume of vessel is not occupied by gas molecules, in which neither of the gas molecules is present = (99.9 × 22.4)/100 = 22.3776 litre.
Teacher's Note: About 99.9% of a gas's volume is empty space, so empty volume = 0.999 × 22.4 L.
Exam Note: Multiply 22.4 L by 0.999.
Objective Question 6. The compressibility factor for definite mass of a van der Waals' gas at 0°C and 100 atmosphere is found to be 0.5. Assuming the volume of gas molecules negligible, the van der Waals' constant 'a' for a gas is:
(a) 1.256 litre2 mol−2 atm (b) 0.256 litre2 mol−2 atm (c) 2.256 litre2 mol−2 atm (d) 0.0256 litre2 mol−2 atm
Solution. Correct option: (a). Z = PV/nRT = 0.5. [P + n²a/V²][V − nb] = nRT; with b negligible [P + n²a/V²][V] = nRT, i.e. PV² − nRTV + n²a = 0, ∴ V = [nRT ± √(n²R²T² − 4n²aP)]/(2P). Since V is constant at given P and T, the discriminant is zero: n²R²T² = 4n²aP, so a = R²T²/(4P) = (0.0821)² × (273)²/(4 × 100) = 1.256 litre² mol−2 atm.
Teacher's Note: With b neglected, a single real volume means the quadratic's discriminant is zero, giving a = R²T²/4P.
Exam Note: State discriminant = 0 reasoning for full marks.
Objective Question 7. The pressure exerted by 1 mole of CO2 at 273 K, is 34.98 atm. Assuming that volume occupied by CO2 molecules is negligible, the value of van der Waals' constant for attraction of CO2 gas is:
(a) 3.59 dm6 atm mol−2 (b) 2.59 dm6 atm mol−2 (c) 1.25 dm6 atm mol−2 (d) 1.59 dm6 atm mol−2
Solution. Correct option: (a). [P + a/V²][V − b] = RT, so [P + a/V²]V = RT (b is negligible), or V²P − RTV + a = 0, V = [RT ± √(R²T² − 4Pa)]/(2P). Since V can have only one value at given P and T, discriminant = 0 ∴ R²T² = 4Pa, or a = R²T²/(4P) = (0.0821)² × (273)²/(4 × 34.98) = 3.59 dm6 atm mol−2.
Teacher's Note: Same discriminant-zero trick as the previous question, here with P = 34.98 atm for 1 mol.
Exam Note: dm⁶ atm mol⁻² equals litre² atm mol⁻².
Objective Question 8. Relative humidity of air is 60% and the saturation vapour pressure of water vapour in air is 3.6 kPa. The mass of water vapours present in 2 litre air at 300 K is:
(a) 52 g (b) 31.2 g (c) 26 g (d) 5.2 g
Solution. Correct option: (b). PV = (w/M)RT (for vapours of H2O); P = 3.6×10³ Pa; V = 2×10−3 m³; T = 300 K. ∴ wH2O = (3.6×10³ × 18 × 2×10−3)/(8.314 × 300) = 0.052 kg, or w = 52 g. Since relative humidity = 60%, therefore amount of H2O = 52 × 0.6 = 31.2 g.
Teacher's Note: Compute vapour mass at saturation using SI units, then scale by 60% relative humidity.
Exam Note: Kilopascals must become pascals; then multiply by 0.6.
Objective Question 9. A 3 : 2 molar mixture of N2 and CO is present in a vessel at 500 K and 500 bar pressure. Due to hole in the vessel, the gas mixture leaks out. The composition of mixture effusing out initially is:
(a) nN2 : nCO :: 1 : 2 (b) nN2 : nCO :: 6 : 1 (c) nCO : nN2 :: 1 : 2 (d) nCO : nN2 :: 2 : 3
Solution. Correct option: (d). Molar ratio of N2 and CO is 3 : 2, i.e. partial pressures are in the ratio 3 : 2 (the book writes 300 bar and 200 bar respectively). nN2/nCO = √(MCO/MN2) × PN2/PCO = 300/200 = 3/2. So nCO : nN2 = 2 : 3.
Teacher's Note: CO and N₂ both have M = 28, so effusion ratio equals the partial-pressure ratio 3:2.
Exam Note: Equal molar masses: the effusing mixture keeps the original ratio.
Objective Question 10. Number of N2 molecules present in 1 litre vessel at NTP when compressibility factor is 1.2 is:
(a) 2.23×1024 (b) 2.23×1022 (c) 2.7×1022 (d) 2.7×1024
Solution. Correct option: (b). Z = PV/nRT, ∴ n = PV/(ZRT) = (1 × 1)/(1.2 × 0.0821 × 273) = 0.037. Number of molecules = 0.037 × 6.023×1023 = 2.23×1022.
Teacher's Note: Use n = PV/(ZRT), then multiply by Avogadro's number.
Exam Note: Z sits in the denominator for n.
Objective Question 11. Select the correct statement:
(a) A mixture of ideal gases is cooled up to liquid the temperature (4.22 K) to form ideal solution.
(b) Ideal gas can be liquefied on applying pressure and lowering temperature.
(c) Kinetic energy of a gas is zero at 0°C.
(d) Ideal gas on subjecting to Joule-Thomson effect do not show cooling on account of absence of molecular forces of attraction.
Solution. Correct option: (d). Ideal gas does not show cooling or heating.
Teacher's Note: Joule-Thomson cooling needs intermolecular attraction, absent in an ideal gas.
Exam Note: Link J-T effect to intermolecular forces.
Objective Question 12. Select the incorrect statement:
(a) Compressibility factor for an ideal gas is unity.
(b) A real gas approaches ideal gas nature at high temperature and low pressure.
(c) The compressibility factor Z > 1, then for a gas when repulsive forces predominate.
(d) van der Waals' constant 'a' for NH3 is smaller than N2.
Solution. Correct option: (d). Due to H-bonding in NH3, its 'a' is larger than that of N2.
Teacher's Note: Hydrogen bonding makes NH₃ strongly attractive, so its constant a is large.
Exam Note: 'Incorrect statement': pick the false claim.
Objective Question 13. 0.44 g dry ice is placed in an evacuated chamber of 5 litre at 27°C. The pressure inside the vessel when whole dry ice has been evaporated to gaseous state is:
(a) 0.49 atm (b) 0.049 atm (c) 4.9×10−3 atm (d) 4.9 atm
Solution. Correct option: (b). Dry ice is solid CO2. ∴ P × 5 = (0.44/44) × 0.0821 × 300, so P = 0.049 atm.
Teacher's Note: Dry ice is solid CO₂ (M = 44): 0.01 mol in 5 L at 300 K.
Exam Note: Convert 27°C to 300 K.
Objective Question 14. An oxide of nitrogen has density 1.33 g/litre at 764 mm Hg and 150°C. The oxide of nitrogen is:
(a) N2O5 (b) NO2 (c) N2O (d) NO
Solution. Correct option: (b). PV = (w/M)RT, ∴ M = (w/V·P)RT = (1.33 × 0.0821 × 423 × 760)/764 = 46. Molar mass of NO2 is 46 g mol−1.
Teacher's Note: Use M = dRT/P with T = 423 K and P in atm; 46 identifies NO₂.
Exam Note: Pressure 764 mm Hg must be in atm.
Objective Question 15. If Pg and Pv are partial pressure of H2Ov and saturated vapour pressure of H2Ov respectively, then % relative humidity is given by:
(a) (Pv/Pg) × 100 (b) (Pg/Pv) × 100 (c) ((Pg + Pv)/P) × 100 (d) ((Pg − Pv)/Pg) × 100
Solution. Correct option: (b). R.H. = (partial pressure of H2Ov/saturated V.P. of H2O) × 100.
Teacher's Note: Relative humidity is actual partial pressure over saturated vapour pressure.
Exam Note: Identify which symbol is partial, which saturated.
Objective Question 16. A graph plotted between Pd vs. P where P is pressure of C2H6 gas (assume ideal gas) and d is its density in g/L at particular temperature [d(Pd)/dP] = 20 when P = 8.21 atm, the temperature of gas will be:
(a) 400 K (b) 1200 K (c) 300 K (d) 600 K
Solution. Correct option: (c). PV = (w/M)RT, ∴ PM = dRT, or d = PM/RT, Pd = P²M/RT. ∴ d(Pd)/dP = 2PM/RT = 20, ∴ T = (2 × 8.21 × 30)/(0.0821 × 20) = 300 K.
Teacher's Note: Write d = PM/RT, differentiate Pd = P²M/RT, then substitute M = 30 for C₂H₆.
Exam Note: Differentiate before substituting values.
Objective Question 17. At low pressure when b is negligible for a van der Waals' gas RT = 2√(aP), then volume occupied by gas is:
(a) RT/2P (b) 2RT/P (c) 2P/RT (d) P/RT
Solution. Correct option: (a). [P + a/V²][V − b] = RT, ∴ PV + a/V = RT, or PV² + a − RTV = 0. ∴ V = [RT ± √(R²T² − 4aP)]/(2P) = RT/(2P) (as given P and T, only one value of volume, thus discriminant is zero).
Teacher's Note: RT = 2√(aP) makes the discriminant zero, leaving V = RT/2P.
Exam Note: Zero discriminant leaves V = RT/2P.
Objective Question 18. The pressure exerted by sodium vapours in a 2 litre container is 50 bar at 1000°C. The number of atoms of sodium in the container is:
(a) 5.76×1016 (b) 5.76×1023 (c) 5.76×1017 (d) 5.76×1019
Solution. Correct option: (b). PV = nRT, nNa = PV/RT = (50 × 2)/(0.0821 × 1273) = 0.9568. ∴ Number of atoms = 0.9568 × 6.023×1023 = 5.76×1023.
Teacher's Note: The book takes 50 bar ≈ 50 atm; n = PV/RT, then multiply by N_A.
Exam Note: Use 1273 K and monatomic Na vapour.
Objective Question 19. The quantity PV/kT, where k represents Boltzmann's constant represents:
(a) Number of mole of gas (b) Number of molecules of gas (c) Mass of gas (d) K.E./molecule of gas
Solution. Correct option: (b). n = PV/RT = PV/(kN·T) (R/N = k). ∴ n × N = PV/kT = number of molecules.
Teacher's Note: Since R = Nk, PV/kT = nN, the number of molecules.
Exam Note: k = R/N_A converts moles to molecules.
Objective Question 20. A mixture containing Ne and Ar in a vessel at 250 K has a total translational kinetic energy = 3 kJ. The total mass of mixture is 30 g. What is the mass % of Ar in mixture?
(a) 28.3 (b) 71.7 (c) 50.3 (d) 30.2
Solution. Correct option: (b). Let a g of Ne and b g of Ar be present respectively: a + b = 30 ...(1). K.E. of mixture = (3/2)[a/20 + b/40]RT = 3×10³, so a/20 + b/40 = (3×10³ × 2)/(3 × 8.314 × 250) = 0.96, ∴ 2a + b = 38.48 ...(2). ∴ a = 8.48 and b = 21.52. % Ar = (21.52/30) × 100 = 71.7%.
Teacher's Note: Total translational K.E. = (3/2)nRT over both gases gives a second equation with the mass sum.
Exam Note: Set up two equations in the two masses.
Objective Question 21. An electric lamp is filled with an ideal gas having density 0.75 kg/m³ and pressure 4×104 Pa. On switching on the lamp, the temperature of gas molecules increases so that new pressure becomes 9×104 Pa. The increase in urms of gas molecules in m/sec is:
(a) 200 (b) 300 (c) 100 (d) 400
Solution. Correct option: (a). urms = √(3P/d), ∴ Δu = √(3/d) × (√P2 − √P1) = √(3/0.75) × [√(9×10⁴) − √(4×10⁴)] = √(3/0.75) × 100 = 200 m sec−1.
Teacher's Note: Constant volume keeps d fixed, so u_rms = √(3P/d) changes only through P.
Exam Note: Density is constant in a closed lamp.
Objective Question 22. One mole of a monoatomic gas (γ = 5/3) and one mole of a diatomic gas (γ = 7/5) are mixed in a vessel. The value of γ for the mixture is:
(a) 1.5 (b) 3.06 (c) 1.53 (d) 1.43
Solution. Correct option: (a). Monoatomic gas: γ = 5/3, Cv = (3/2)R and Cp = (5/2)R. Diatomic gas: γ = 7/5, Cv = (5/2)R and Cp = (7/2)R. For mixture of 1 mole each: Cv = ((3/2 + 5/2)R)/2 = 2R and Cp = ((5/2 + 7/2)R)/2 = 3R. ∴ γ = Cp/Cv = 3R/2R = 1.5.
Teacher's Note: Average C_p and C_v over equal moles, then take the ratio; do not average γ.
Exam Note: Average C_v and C_p, not γ.
Objective Question 23. At 10°C the density of a fixed mass of an ideal gas divided by its pressure is X. At 110°C, this ratio would be:
(a) 10X/110 (b) 283X/383 (c) X (d) 383X/283
Solution. Correct option: (b). P = (d/M)RT, ∴ d/P ∝ 1/T. d1/P1 × P2/d2 = 383/283, so d2/P2 = (d1/P1) × 283/383 = 283X/383.
Teacher's Note: d/P = M/RT, so the ratio falls inversely with absolute temperature.
Exam Note: Use kelvin: 283 K and 383 K.
Objective Question 24. The no. of atoms of a triatomic gas in 0.1 mol is:
(a) 1.8×1022 (b) 6.02×1023 (c) 1.8×1023 (d) 3.6×1023
Solution. Correct option: (c). 0.1 mole has 0.3 N atom of gas, i.e. 0.3 × 6.023×1023 ≈ 1.8×1023.
Teacher's Note: Atoms = moles × atomicity × N_A: 0.1 × 3 × N_A.
Exam Note: Multiply by 3 atoms per molecule.
Objective Question 25. Equal masses of methane and oxygen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by oxygen is:
(a) 1/3 (b) 1/2 (c) 2/3 (d) (1/3) × (273/298)
Solution. Correct option: (a). P′O2 = PM × mole fraction of O2. ∴ P′/PM = mole fraction of O2 = (w/32)/(w/16 + w/32) = 1/3.
Teacher's Note: Equal masses give mole ratio CH₄:O₂ = 2:1, so O₂ has mole fraction 1/3.
Exam Note: Pressure fraction equals mole fraction.
Objective Question 26. The temperature at which a real gas obeys the ideal gas laws over a wide range of pressure is:
(a) Critical temperature (b) Boyle's temperature (c) Inversion temperature (d) Reduced temperature
Solution. Correct option: (b). It is definition of Boyle's temperature.
Teacher's Note: At Boyle's temperature the second virial coefficient vanishes, so PV ≈ nRT over a wide pressure range.
Exam Note: Boyle temperature: B = 0, ideal over wide P.
Objective Question 27. The ratio of root mean square speed to average speed of a gas molecule at a particular temperature is:
(a) 1.886 (b) 1.086 (c) 0.9213 (d) 1.426
Solution. Correct option: (b). Urms = √(3RT/M); Uav = √(8RT/πM). ∴ Urms/Uav = √(3π/8) = 1.086.
Teacher's Note: Divide √(3RT/M) by √(8RT/πM); the ratio is √(3π/8) independent of T and M.
Exam Note: Ratio is fixed: √(3π/8) = 1.086.
Objective Question 28. Helium atom is two times heavier than a hydrogen molecule. At 298 K, the average kinetic energy of a helium atom is:
(a) Two times of a H2 molecule (b) Same as of H2 molecule (c) Four times of a H2 molecule (d) 1/2 of H2 molecule
Solution. Correct option: (b). Average K.E. = (3/2)(RT/N) = (3/2)kT, independent of the mass of the gas.
Teacher's Note: Average K.E. = (3/2)kT depends only on temperature, not on mass.
Exam Note: Mass is irrelevant to average K.E. at fixed T.
Objective Question 29. Equal masses of methane and hydrogen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by hydrogen is:
(a) 1/2 (b) 8/9 (c) 1/9 (d) 16/17
Solution. Correct option: (b). P′H2/PM = mole fraction of H2 = (w/2)/(w/2 + w/16) = 8/9.
Teacher's Note: Equal masses: moles H₂ : CH₄ = 8:1, so H₂ fraction is 8/9.
Exam Note: Convert masses to moles before pressure fractions.
Objective Question 30. The value of van der Waals' constant 'a' for the gases O2, N2, NH3 and CH4 are 1.360, 1.390, 4.170 and 2.253 L² atm mol−2 respectively. The gas which can most easily be liquefied is:
(a) O2 (b) N2 (c) NH3 (d) CH4
Solution. Correct option: (c). Greater the value of 'a', i.e. intermolecular forces of attraction for a gas, the more easily the gas will be liquefied.
Teacher's Note: Largest a means strongest attractions and highest critical temperature, so NH₃ liquefies most easily.
Exam Note: Largest 'a' means easiest liquefaction.
Objective Question 31. A liquid is in equilibrium with its vapours at its boiling point. On the average, the molecules in the two phases have equal:
(a) inter-molecular forces (b) potential energy (c) kinetic energy (d) total energy
Solution. Correct option: (c). At a given temperature (see equilibrium exist) kinetic energy of gas/liquid = (3/2)RT.
Teacher's Note: Average kinetic energy depends only on temperature, which is equal in both phases.
Exam Note: Equal temperature gives equal average K.E.
Objective Question 32. Rate of diffusion of a gas is:
(a) directly proportional to its density (b) directly proportional to its molar mass (c) directly proportional to the square root of its molar mass (d) inversely proportional to the square root of its molar mass
Solution. Correct option: (d). Graham's law of diffusion: r ∝ √(1/M).
Teacher's Note: Graham's law: rate ∝ 1/√M at fixed pressure and temperature.
Exam Note: State Graham's law with the root.
Objective Question 33. The average speed of an ideal gas molecule at 27°C is 0.3 m/s. The average speed at 927°C will be:
(a) 0.6 m/s (b) 0.3 m/s (c) 0.9 m/s (d) 3.0 m/s
Solution. Correct option: (a). uAV = √(8RT/πM); u1/u2 = √(T1/T2). ∴ 0.3/u2 = √(300/1200), or u2 = √(1200/300) × 0.3 = 0.6 m s−1.
Teacher's Note: Average speed ∝ √T; 300 K to 1200 K doubles it.
Exam Note: Convert 927°C to 1200 K.
Objective Question 34. In van der Waals' equation of state for a non-ideal gas, the term that accounts for intermolecular forces is:
(a) (V − b) (b) RT (c) (P + a/V²) (d) (RT)−1
Solution. Correct option: (c). Pressure correction in gas equation by van der Waals' is a/V² for 1 mole. Thus Pgas = [P + a/V²].
Teacher's Note: The a/V² term corrects pressure for intermolecular attraction.
Exam Note: a corrects pressure, b corrects volume.
Objective Question 35. A bottle of dry ammonia and a bottle of dry hydrogen chloride connected through a long tube are opened simultaneously at both ends. The white ammonium chloride ring first formed will be:
(a) at the centre of the tube (b) near the hydrogen chloride bottle (c) near the ammonia bottle (d) throughout the length of the tube
Solution. Correct option: (b). HCl diffuses at a slower rate because of its higher molar mass.
Teacher's Note: NH₃ (M = 17) diffuses faster than HCl (36.5), so the ring forms nearer the HCl end.
Exam Note: Lighter gas travels farther before meeting.
Objective Question 36. The density of neon will be highest at:
(a) STP (b) 0°C, 2 atm (c) 273°C, 1 atm (d) 273°C, 2 atm
Solution. Correct option: (b). Density of a gas d = PM/RT; d ∝ P and d ∝ 1/T.
Teacher's Note: d = PM/RT is largest at high P and low T: 2 atm and 273 K.
Exam Note: High pressure and low temperature maximise density.
Objective Question 37. The rate of diffusion of methane at a given temperature is twice that of a gas X. The molar mass of X is:
(a) 64.0 (b) 32.0 (c) 4.0 (d) 8.0
Solution. Correct option: (a). rCH4/rX = √(MX/MCH4). Thus 2/1 = √(MX/16), ∴ MX = 4 × 16 = 64.
Teacher's Note: Graham's law: doubling the rate means the molar mass is four times that of CH₄.
Exam Note: Rate ratio squared gives mass ratio.
Objective Question 38. According to the kinetic theory of gases for a diatomic molecule:
(a) the pressure exerted by the gas is proportional to the root mean square speed of the molecule
(b) the pressure exerted by the gas is proportional to the mean speed of the molecule
(c) the root mean square speed of the molecule is inversely proportional to the temperature
(d) the mean translational kinetic energy of the molecule is proportional to the absolute temperature
Solution. Correct option: (d). K.E. = (3/2)(RT/N).
Teacher's Note: Mean translational K.E. is (3/2)kT for every ideal gas, so it is proportional to T.
Exam Note: Pressure ∝ u², not u; u_rms ∝ √T.
Objective Question 39. At constant volume, for a fixed number of mole of a gas, the pressure of the gas increases with rise of temperature due to:
(a) increase in average molecular speed (b) increase rate of collisions amongst molecules (c) increase in molecular attraction (d) decrease in mean free path
Solution. Correct option: (a). PV = (1/3)mnu²; for one mole, PV = (1/3)Mu², ∴ P ∝ u².
Teacher's Note: Pressure is proportional to u², so faster molecules at higher T raise pressure.
Exam Note: P ∝ u² links pressure to molecular speed.
Objective Question 40. Equal masses of ethane and hydrogen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by hydrogen is:
(a) 1 : 1 (b) 1 : 2 (c) 1 : 16 (d) 15 : 16
Solution. Correct option: (d). P′H2/PM = mole fraction of H2 = (w/2)/(w/2 + w/30) = 15/16.
Teacher's Note: Equal masses of H₂ (2) and C₂H₆ (30) give mole ratio 15:1, so H₂ fraction is 15/16.
Exam Note: Mole fraction equals pressure fraction.
| List A | List B |
|---|---|
| (1) C6H6(g) | (a) 0.217 |
| (2) C6H5CH3(g) | (b) 5.464 |
| (3) Ne(g) | (c) 18.00 |
| (4) H2O(g) | (d) 24.060 |
(a) 1-a, 2-d, 3-c, 4-b (b) 1-d, 2-a, 3-b, 4-c (c) 1-c, 2-d, 3-a, 4-b (d) 1-b, 2-c, 3-a, 4-d
Solution. Correct option: (c). Due to higher molar mass of C6H5·CH3, its 'a' is largest (24.060); so benzene 18.00, toluene 24.060, Ne 0.217, water vapour 5.464.
Teacher's Note: Larger, more polarisable molecules have larger a; Ne smallest, toluene largest.
Exam Note: Rank by molecular size and polarity.
Objective Question 42. Which of the following gas molecules has the largest mean free path?
(a) H2 (b) N2 (c) O2 (d) Cl2
Solution. Correct option: (a). The book's reason (“due to higher repulsive forces”) is unclear. Corrected reasoning: mean free path λ = RT/(√2 π σ² NA P) ∝ 1/σ², and H2 has the smallest molecular diameter σ, so it has the largest mean free path.
Teacher's Note: Mean free path varies inversely with the square of molecular diameter; H₂ is smallest.
Exam Note: λ ∝ 1/σ²: smallest molecule wins.
Objective Question 43. The ratio between the root mean square speed of H2 at 50 K and that of O2 at 800 K is:
(a) 4 (b) 2 (c) 1 (d) 1/4
Solution. Correct option: (c). Urms = √(3RT/M). (Urms)H2 = √(3 × R × 50/2) at 50 K ...(1); (Urms)O2 = √(3 × R × 800/32) at 800 K ...(2). So (Urms)H2/(Urms)O2 = √(50 × 32/(2 × 800)) = 1.
Teacher's Note: Compare T/M for each gas: 50/2 = 25 and 800/32 = 25, so the speeds are equal.
Exam Note: Compare T/M, not T and M separately.
Objective Question 44. X mL of H2 gas effuses through a hole in container in 5 seconds. The time taken for effusion of the same volume of the gas specified below under identical conditions is:
(a) 10 s : He (b) 20 s : O2 (c) 25 s : CO (d) 55 s : CO2
Solution. Correct option: (b). Use r0 = V/t ∝ √(1/M) (P, T). rH2/rO2 = √(MO2/MH2), (X/5)/(X/t) = √(32/2) ∴ t = 20 sec.
Teacher's Note: Same volume effuses in time ∝ √M, so O₂ takes 4 times as long as H₂.
Exam Note: Time scales as √M: √16 = 4.
Objective Question 45. The compressibility factor for an ideal gas is:
(a) 1.5 (b) 1.0 (c) 2.0 (d) ∞
Solution. Correct option: (b). PV/nRT = Z (compressibility factor) for an ideal gas Z = 1.
Teacher's Note: For an ideal gas PV = nRT exactly, so Z = 1.
Exam Note: Z = 1 for an ideal gas.
Objective Question 46. The critical temperature of H2O is higher than O2 because the H2O molecule has:
(a) A fewer electron than O2 (b) Two covalent bond (c) V shape (d) Dipole moment
Solution. Correct option: (d). Dipole moment gives rise to higher value of a for H2O in spite of low molar mass.
Teacher's Note: Polar H₂O has strong dipole attractions (large a), raising T_c = 8a/27Rb.
Exam Note: T_c grows with a: strong attractions raise it.
Objective Question 47. According to Graham's law, at a given temperature the ratio of the rates of diffusion rA/rB of gases A and B are given by (where P and M are pressures and molar masses of gases A and B respectively):
(a) (PA/PB)(MA/MB)1/2 (b) (MA/MB)(PA/PB)1/2 (c) (PA/PB)(MB/MA)1/2 (d) (MA/MB)(PB/PA)1/2
Solution. Correct option: (c). According to Graham's law of diffusion r ∝ P√(1/M) at constant temperature. ∴ rA/rB = (PA/PB)√(MB/MA) = (PA/PB)(MB/MA)1/2.
Teacher's Note: Rate is proportional to pressure and inversely to √M.
Exam Note: Pressure enters linearly, molar mass as √ inverse.
Objective Question 48. A gas will approach ideal behaviour at:
(a) low temperature and low pressure (b) low temperature and high pressure (c) high temperature and low pressure (d) high temperature and high pressure
Solution. Correct option: (c). A gas will approach ideal behaviour at high temperature and low pressure.
Teacher's Note: High T beats attractions and low P makes molecular volume negligible.
Exam Note: Ideal at high T and low P.
Objective Question 49. Which of these gases exhibits behaviour that deviates most significantly from that expected for an ideal gas?
Four graphs are given (a) Gas A: volume (L) vs temperature (K), a straight line rising from near the origin (p, n constant); (b) Gas B: pressure × volume vs pressure (atm), a horizontal line (n, T constant); (c) Gas C: pressure (atm) vs temperature (K), a straight line rising from near the origin (n, V constant); (d) Gas D: pressure/temperature vs volume (L), a falling straight line (n, T constant).
Solution. Correct option: (d). Fig. (a) represents Charles' law; Fig. (b) represents Boyle's law; Fig. (c) represents P-T law; Fig. (d) does not obey ideal gas laws as P/T = K/V. An increase in V will show a decrease in P/T like a hyperbola (P/T falling steeply at small V and flattening at large V), as in the P–V curve of Boyle's law.
Teacher's Note: P/T = nR/V should plot as a hyperbola against V, not as a straight line.
Exam Note: Check each graph against its gas law.
Objective Question 50. Which of the following graph is in accordance to the Maxwell distribution of molecular speeds and its dependence on temperature?
Four graphs of fraction of molecules vs speed are given: (a) a single curve labelled High temperature (P const.); (b) a narrow tall peak labelled Low temperature; (c) a broad lower peak labelled High temperature with ump marked on the speed axis; (d) a peak labelled Low temperature.
Solution. Correct option: (c). Follow text: as temperature increases the peak shifts to higher speed (ump) and becomes lower and broader.
Teacher's Note: Raising T moves the most probable speed up and flattens and widens the curve.
Exam Note: Higher T: lower, broader peak at higher speed.
Objective Question 51. Which of the following graphs represents 1/V² vs P curve for an ideal gas at constant T and n?
Four curves, each with P on the horizontal axis and 1/V² on the vertical axis: (a) a straight line rising from the origin; (b) a rising concave curve; (c) a rising curve which is convex (upward-curving, parabola-like); (d) a falling curve.
Solution. Correct option: (c). Let Y = 1/V² and X = P = K/V. ∴ V = 1/√Y. Also X = K√Y, so Y = K′·X², i.e. curve (c).
Teacher's Note: P ∝ 1/V gives 1/V² ∝ P², an upward-opening parabola through the origin.
Exam Note: Square the Boyle relation: 1/V² ∝ P².
Objective Question 52. Which of the following graph represents V vs 1/P² for ideal gas at constant T and n?
Four curves, each with 1/P² on the horizontal axis and V on the vertical axis: (a) a straight line rising from the origin; (b) a rising concave curve; (c) a rising convex curve; (d) a falling curve.
Solution. Correct option: (b). Let 1/P² = Y, ∴ P = 1/√Y; if X = V = K/P, or X = K√Y, i.e. X² = K′Y, curve (b).
Teacher's Note: V ∝ 1/P gives V² ∝ 1/P², so V against 1/P² is a square-root curve.
Exam Note: V ∝ √(1/P²): a concave rising curve.
Objective Question 53. The ratio of rates of diffusion of SO2 and CH4 placed in a container in the mass ratio of 8 : 1 at the same temperature is:
(a) 1 (b) 2 (c) 3 (d) 4
Solution. Correct option: (a). Moles are in the ratio (8/64) : (1/16) = 2 : 1, so pressures are in the ratio 2 : 1. rSO2/rCH4 = (P ratio) × √(MCH4/MSO2) = 2 × √(16/64) = 1.
Teacher's Note: Mass ratio 8:1 means mole ratio 2:1; rate ∝ P/√M then cancels to 1.
Exam Note: Convert mass ratio to mole (pressure) ratio.
Objective Question 54. The inversion temperature Ti (K) of hydrogen is ... (Given van der Waals' constants a and b are 0.244 atm litre2 mol−2 and 0.027 litre mol−1 respectively): (IIT 2000)
(a) 440 (b) 220 (c) 110 (d) 330
Solution. Correct option: (b). Ti = 2a/(Rb) = (2 × 0.244)/(0.027 × 0.0821) = 220.14.
Teacher's Note: Inversion temperature = 2a/Rb with a and b from the van der Waals equation.
Exam Note: Ti = 2a/Rb; double the Boyle temperature.
Objective Question 55. The compressibility of gas is less than unity at STP. Therefore: (IIT 2000)
(a) Vm > 22.4 litre (b) Vm < 22.4 litre (c) Vm = 22.4 litre (d) Vm > 44.8 litre
Solution. Correct option: (b). Z < 1 or PV/nRT < 1. Thus, Vm < 22.4 litre.
Teacher's Note: Z < 1 at STP means molar volume is below the ideal 22.4 L.
Exam Note: At STP: Z < 1 means V_m < 22.4 L.
Objective Question 56. The rms speed of hydrogen is √7 times the rms speed of nitrogen. If T is the temperature of the gas, then: (IIT 2000)
(a) T(H2) = T(N2) (b) T(H2) > T(N2) (c) T(H2) < T(N2) (d) T(H2) = √7 T(N2)
Solution. Correct option: (c). urmsH2 = √(3RT1/2) and urmsN2 = √(3RT2/28). urmsH2 = √7 × urmsN2, i.e. √(3RT1/2) = √7 × √(3RT2/28), so T1/2 = T2/4, or T2 = 2T1, i.e. TN2 > TH2.
Teacher's Note: At equal temperature H₂ would be √14 times faster, so H₂ must be at the lower temperature.
Exam Note: Equate u_rms expressions; square both sides.
Objective Question 57. At 100°C and 1 atm, if the density of liquid water is 1.0 g cm−3 and that of water vapour is 0.0006 g cm−3, then the volume occupied by water molecules in 1 litre of steam at that temperature is: (IIT 2000)
(a) 6 cm3 (b) 60 cm3 (c) 0.6 cm3 (d) 0.06 cm3
Solution. Correct option: (c). Mass of 1000 mL steam = 1000 × 0.0006 = 0.6 g. ∴ Volume of liquid water = 0.6/1 = 0.6 cm³.
Teacher's Note: Mass of the steam times the liquid's specific volume gives the molecules' own volume.
Exam Note: Mass of steam ÷ liquid density.
Objective Question 58. The root mean square speed of an ideal gas at constant pressure varies with density d as: (IIT 2001)
(a) d² (b) d (c) √d (d) 1/√d
Solution. Correct option: (d). urms = √(3PV/M) = √(3P/d).
Teacher's Note: With u = √(3P/d) and P fixed, u ∝ 1/√d.
Exam Note: Use u = √(3P/d).
Objective Question 59. Which of the following volume (V) vs. temperature (T) plots represents the behaviour of one mole of an ideal gas at one atmospheric pressure: (IIT 2002)
Four V (L) against T (K) plots, each a straight line starting at (22.4 L at 273 K) and ending at 373 K at: (a) 36.8 L; (b) 28.6 L; (c) 30.6 L; (d) 14.2 L (a falling line).
Solution. Correct option: (c). Use V1/T1 = V2/T2: V at 373 K = 22.4 × 373/273 = 30.6 L.
Teacher's Note: Charles' law: V ∝ absolute T, so 22.4 L at 273 K becomes 30.6 L at 373 K.
Exam Note: Use kelvin: V₂ = 22.4 × 373/273.
Objective Question 60. When the temperature is increased surface tension of water: (IIT 2002)
(a) increases (b) decreases (c) remains constant (d) show irregular behaviour
Solution. Correct option: (b). Forces of attractions are weakened as the temperature increases.
Teacher's Note: Higher temperature weakens surface attractions, lowering surface tension.
Exam Note: Surface tension falls as T rises.
Objective Question 61. Positive deviations from ideal gas behaviour takes place because of: (IIT 2003)
(a) molecular interaction between atoms and PV/nRT > 1
(b) molecular interaction between atoms and PV/nRT < 1
(c) finite size of atoms and PV/nRT > 1
(d) finite size of atoms and PV/nRT < 1
Solution. Correct option: (c). For positive deviations Z > 1, i.e. the condition when repulsive forces predominate. Also, at high P, V is small and b cannot be ignored, but the factor a/V² can be neglected in comparison to P. Thus, Z = 1 + Pb/RT.
Teacher's Note: Positive deviation (Z > 1) comes from finite molecular size: Z = 1 + Pb/RT.
Exam Note: Z>1 from size b; Z<1 from attraction.
Objective Question 62. The root mean square speed of one mole of a monoatomic gas having molar mass M is urms. The relation between the average kinetic energy (E) of the gas and urms is: (IIT 2004)
(a) urms = √(3E/2M) (b) urms = √(2E/3M) (c) urms = √(2E/M) (d) urms = √(E/3M)
Solution. Correct option: (c). urms = √(3RT/M) and K.E. = (3/2)RT. ∴ urms = √(2E/M).
Teacher's Note: Substitute E = (3/2)RT per mole into u = √(3RT/M) to get √(2E/M).
Exam Note: Eliminate RT using E = 3RT/2.
Objective Question 63. The ratio of the rate of diffusion of helium and methane under identical conditions of pressure and temperature is: (IIT 2005)
(a) 4 (b) 2 (c) 1 (d) 0.5
Solution. Correct option: (b). rHe/rCH4 = √(MCH4/MHe) = √(16/4) = 2.
Teacher's Note: Graham's law: rate ratio is √(16/4) = 2.
Exam Note: Lighter gas diffuses faster by √(M ratio).
Objective Question 64. A monoatomic ideal gas undergoes a process in which the ratio of P to V at any instant is constant and equal to unity. The molar heat capacity of gas is: (IIT 2006)
(a) 2.0 R (b) 1.5 R (c) 2.5 R (d) 0
Solution. Correct option: (a). P/V = 1, so P = V and PV = RT gives V² = RT. Heat capacity C = Cv + P(dV/dT). Differentiating V² = RT: 2V(dV/dT) = R, so P(dV/dT) = V·R/(2V) = R/2. ∴ C = (3/2)R + R/2 = 2R.
Teacher's Note: For P = V, P dV/dT = R/2, so C = Cv + R/2 = 2R.
Exam Note: Use C = Cv + P dV/dT along the process.
Objective Question 65. The term that accounts for the attractive forces present in a real gas in the van der Waals' equation is: (IIT 2009)
(a) nb (b) n²a/V² (c) −an²/V² (d) −nb
Solution. Correct option: (b). van der Waals' equation has pressure correction term [P + n²a/V²] due to attraction forces.
Teacher's Note: The n²a/V² term added to P compensates for the reduction in pressure caused by attractions.
Exam Note: Pressure correction is n²a/V²; volume correction is nb.
Objective Question 66. At 400 K, the root mean square (rms) speed of a gas X (molar mass 40) is equal to the most probable speed of gas Y at 60 K. The molar mass of gas Y is: (IIT 2009)
(a) 2 (b) 4 (c) 6 (d) 8
Solution. Correct option: (b). urms X = √(3R × 400/40); uMPY = √(2R × 60/M). Equating, 1200/40 = 120/M, so M = 4.
Teacher's Note: Set √(3R·400/40) = √(2R·60/M); R cancels and M = 4.
Exam Note: Equate speeds; R cancels.
Objective Question 67. For one mole of a van der Waals' gas when b = 0 and T = 300 K, the PV vs. 1/V plot is shown below. The value of the van der Waals' constant a (atm.litre2 mol−2) is: (IIT 2012)
Graph (not to scale): PV (litre-atm mol−1) on the vertical axis (marked 24.6, 23.1, 21.6, 20.1), 1/V (mol litre−1) on the horizontal axis (marked 2.0 and 3.0); a falling straight line starting from 24.6 on the PV axis and passing through (1/V = 2.0, PV = 21.6) and (1/V = 3.0, PV = 20.1).
(a) 1.0 (b) 4.5 (c) 1.5 (d) 3.0
Solution. Correct option: (c). van der Waals' equation for 1 mol of real gas is [P + a/V²][V − b] = RT. Given b = 0: (P + a/V²)V = RT, so PV = RT − a/V ...(i). Following y = mx + c for the curve PV vs 1/V, slope = −a. Slope = (21.6 − 20.1)/(2 − 3) = −1.5, ∴ a = 1.5.
Teacher's Note: With b = 0, PV = RT − a/V, so the slope of PV against 1/V is −a.
Exam Note: Read slope from two points on the line.
Objective Question 68. For gaseous state, if most probable speed is denoted by C*, average speed by C̄ and mean square speed by C, then for a large number of molecules the ratios of these speeds are: [JEE (Main) 2013]
(a) C* : C̄ : C = 1 : 1.128 : 1.225 (b) C* : C̄ : C = 1 : 1.225 : 1.128 (c) C* : C̄ : C = 1.225 : 1.128 : 1 (d) C* : C̄ : C = 1.128 : 1.225 : 1
Solution. Correct option: (a). um.p. : uAv : urms :: √(2RT/M) : √(8RT/πM) : √(3RT/M) :: 1 : 1.128 : 1.225. Thus C* : C̄ : C :: 1 : 1.128 : 1.225.
Teacher's Note: Divide √(2RT/M), √(8RT/πM), √(3RT/M) by √(2RT/M) to get 1 : 1.128 : 1.225.
Exam Note: Order: most probable < average < rms.
Objective Problems (More Than One Answer Correct)
Fig. (a): P vs T, lines through the origin labelled V1, V2, V3 from steepest to least steep. Fig. (b): P vs 1/V, lines through the origin labelled T1, T2, T3 from steepest to least steep. Fig. (c): V vs T, lines through the origin labelled P1, P2, P3 from steepest to least steep. Fig. (d): log P vs log V, three parallel falling lines labelled T1 (top), T2, T3 (bottom).
Solution. Correct options: (b), (d). PV = nRT if P1 > P2, V1 < V2. Also log P = −log V + log RT. In (a) the slope nR/V should be largest for the smallest volume; in (c) the slope nR/P should be largest for the smallest pressure, so (a) and (c) are wrongly labelled.
Teacher's Note: Slopes: P–T nR/V; P–1/V nRT; V–T nR/P; log P–log V slope −1.
Exam Note: Check each slope against its variable ordering.
Multiple-Correct Question 2. A mixture of SO2 and O2 in the molar ratio 16 : 1 is diffused through a pin hole for successive effusions three times to give a molar ratio 1 : 1 of diffused mixture. Which one are correct if diffusion is made at same P and T in each operation?
(a) Eight operations are needed to get 1 : 1 molar ratio
(b) Rate of diffusion for SO2 : O2 after 8 operations is 0.707
(c) Six operations are needed to get 2 : 1 molar ratio for SO2 and O2 in diffusion mixture
(d) Rate of diffusion for SO2 and O2 after 6 operations is 2.41
Solution. Correct options: (a), (b), (c). (f1)X = (n′SO2/n′O2) × (nO2/nSO2), where nSO2 and nO2 are moles present initially. X log √(MO2/MSO2) = log[(n′SO2/n′O2) × (nO2/nSO2)], X log √(32/64) = log(1/1 × 1/16), ∴ X = 8. Also n1/n2 = r1/r2 = √(M2/M1) = √(32/64) = 0.707 in each operation. If X = 6 then 6 log √(32/64) = log[(n′SO2/n′O2) × 1/16], so n′SO2/n′O2 = 2 : 1. Rate of diffusion is r1/r2 = √(M2/M1), i.e. 0.707 in each operation.
Teacher's Note: Each effusion multiplies the SO₂:O₂ ratio by 0.707, so reaching 1:16 to 1:1 takes 8 stages (0.707⁸ = 1/16).
Exam Note: Per-stage factor √(32/64) = 0.707.
Multiple-Correct Question 3. A graph plotted between log V and log T for 2 mole of gas at constant pressure of 0.0821 atm. V and T are in litre and K respectively. Which of the following statements are correct?
(a) The curve is straight line with slope −1
(b) The curve is straight line with slope +1
(c) The intercept on Y-axis is equal to 2
(d) The intercept on Y-axis is equal to 0.3010
Solution. Correct options: (b), (d). PV = nRT, or log V = log T + log(nR/P). Slope = tan θ = tan 45° = 1. Intercept = log(nR/P) = log[2 × 0.0821/0.0821] = 0.3010.
Teacher's Note: Take logs of V = nRT/P: slope is 1 and intercept is log(nR/P) = log 2.
Exam Note: Intercept is log 2 = 0.3010, not 2.
Multiple-Correct Question 4. A gas obeys P(V − b) = RT. Which of the following are correct about this gas?
(a) Isochoric curves have slope = R/(V − b)
(b) Isobaric curves have slope R/P and intercept b
(c) For the gas compressibility factor = 1 + Pb/RT
(d) The attraction forces are overcome by repulsive forces
Solution. Correct options: (a), (b), (c), (d). P(V − b) = RT, ∴ P = [R/(V − b)]·T, slope = R/(V − b). PV − Pb = RT, V = RT/P + b, slope = R/P and intercept b. Z = PV/RT = 1 + Pb/RT; Z > 1, i.e. repulsive forces predominate.
Teacher's Note: Write P = RT/(V−b) and V = RT/P + b; Z > 1 means repulsion dominates.
Exam Note: Write P vs T and V vs T forms.
Multiple-Correct Question 5. Which are correct for an ideal gas:
(a) (∂P/∂VM)Tc = 0
(b) (∂E/∂V)T = 0
(c) (∂E/∂P)T ≠ 0
(d) (∂n/∂V)P,T ≠ 0
Solution. Correct options: (a), (b), (d). (∂E/∂P)T = zero, since internal energy of an ideal gas depends only on temperature.
Teacher's Note: Ideal-gas internal energy depends only on T, so its derivatives at constant T are zero.
Exam Note: (∂E/∂V)_T = (∂E/∂P)_T = 0 for ideal gas.
Multiple-Correct Question 6. Which are correct for an ideal gas:
(a) (∂P/∂V)T · (∂V/∂T)P · (∂T/∂P)V = 0
(b) (∂P/∂V)T · (∂V/∂T)P · (∂T/∂P)V = −1
(c) (∂P/∂T)V · (∂T/∂V)P · (∂V/∂P)T = −1
(d) (Thermal expansion coefficient of gas)/(Isothermal compressibility constant) = P/T
Solution. Correct options: (b), (c), (d). Thermal expansion coefficient α = (1/V)(∂V/∂T)P = 1/T (use PV = RT). Isothermal compressibility constant = −(1/V)(∂V/∂P)T = 1/P. So α/K = P/T.
Teacher's Note: The cyclic triple-product rule gives −1; α = 1/T and K = 1/P give α/K = P/T.
Exam Note: Cyclic rule: the product equals −1, not 0.
Multiple-Correct Question 7. Select the correct statements:
(a) A gas cannot be compressed below its critical temperature
(b) Critical temperature is the highest temperature at which liquid and gaseous phase can coexist
(c) The fraction of molecules having their most probable speed increases with rise in temperature
(d) Ideal gas can be liquified at high pressure
Solution. Correct option: (b). Corrected: the book's key gives (b), (c), but (c) is false: the fraction of molecules at the most probable speed decreases as temperature rises (the Maxwell curve flattens). (a) is false (a gas can be compressed below Tc, and it liquefies), and (d) is false: an ideal gas has no forces of attraction and cannot be liquefied.
Teacher's Note: Heating flattens the Maxwell curve; T_c is the highest temperature for liquid–gas coexistence.
Exam Note: Maxwell peak falls and widens with T.
Multiple-Correct Question 8. Select the incorrect statements:
(a) Compressibility factor for 1 mole of gas at critical conditions is 8/3
(b) All molecules of gas move with same speed
(c) The diameter of gaseous molecules are much smaller than the average distance travelled between collision
(d) Saturated vapours do not obey gas laws except Dalton's law
Solution. Incorrect statements: (a), (b). Z = PcVc/(RTc) = 3/8 (not 8/3); each molecule moves with altogether different speed.
Teacher's Note: Z at the critical point is 3/8, and molecular speeds follow a distribution, not a single value.
Exam Note: Z_c = 3/8, so (a) is wrong.
Multiple-Correct Question 9. Select the correct statements:
(a) Greater is humidity, lesser will be rate of evaporation of water
(b) Greater is the humidity, lesser will be density of air
(c) If room temperature = dew point; relative humidity = 100%
(d) Dew point is the temperature at which the gas at given atmospheric condition becomes saturated with H2O(v)
Solution. Correct options: (a), (b), (c), (d). All are facts.
Teacher's Note: Humid air is lighter (H₂O replaces N₂/O₂); evaporation slows near saturation.
Exam Note: At dew point, relative humidity is 100%.
Multiple-Correct Question 10. When an ideal gas undergoes unrestrained expansion, no cooling occurs because the molecules:
(a) are above the inversion temperature
(b) exert no attractive forces on each other
(c) do work equal to loss in kinetic energy
(d) collide without loss of energy
Solution. Correct options: (b), (d). No work is required to tear apart molecules due to the absence of attractive forces in an ideal gas. Also collision are perfectly elastic.
Teacher's Note: Free expansion cools a real gas only by overcoming attractions; an ideal gas has none and collisions are elastic.
Exam Note: No attraction means no J-T cooling.
Multiple-Correct Question 11. If a gas is expanded at constant temperature:
(a) the pressure decreases
(b) the kinetic energy of the molecules remains the same
(c) the kinetic energy of the molecules decreases
(d) the number of molecules of the gas increases
Solution. Correct options: (a), (b). When a gas is expanded at constant temperature, then the kinetic energy of the molecules remain the same, but the pressure decreases because V ∝ 1/P.
Teacher's Note: Average kinetic energy depends only on temperature; at fixed T, expansion lowers pressure by Boyle's law.
Exam Note: K.E. depends on T only.
Graph: Z against p (atm). A straight line rises from Z = 1 above the ideal-gas line (horizontal at Z = 1); B is a straight line falling below the ideal-gas line; C starts at Z = 1, dips below the ideal line to a minimum, then rises steeply above it.
(a) For the gas A, a = 0 and its dependence on P is linear at all pressure
(b) For the gas B, b = 0 and its dependence on P is linear at all pressure
(c) For the gas C, which is typical real gas for which a ≠ 1, b ≠ 0. By knowing the minima and the point of intersection with Z ≠ 1, a and b can be calculated
(d) At high pressure, the slope is positive for all real gases
Solution. Correct options: (a), (c), (d). Follow Concepts of Physical Chemistry by Dr. P. Bahadur, G.R. Bathla Publications, Meerut. (Reasoning: Z = 1 + Pb/RT − a/(RTV); for A, a = 0 gives Z = 1 + bP/RT, linear and rising; for B, b = 0 gives a falling curve; the real-gas curve C has a minimum and then rises as b dominates at high P.)
Teacher's Note: With a = 0, Z rises linearly; with b = 0 it falls; real gas dips then rises.
Exam Note: Rising line means b only; falling means a only.
Multiple-Correct Question 13. A gas described by van der Waals' equation: (IIT 2008)
(a) behaves similar to an ideal gas in the limit of large molar volumes
(b) behaves similar to an ideal gas in the limit of large pressure
(c) is characterised by van der Waals' coefficients that are dependent on the identity of gas but are independent of the temperature
(d) has the pressure that is lower than the pressure exerted by the same gas behaves ideally
Solution. Correct options: (a), (c), (d). [P + a/V²][V − b] = RT. If V is large PV = RT (a/V² and b are negligible).
Teacher's Note: At large V, a/V² and b are negligible, so PV = RT; a and b depend on gas, not T.
Exam Note: Large volume, not large pressure, gives ideal behaviour.
Multiple-Correct Question 14. According to kinetic theory of gases: (IIT 2011)
(a) Collisions are always elastic
(b) Heavier molecules transfer more momentum to the wall of the container
(c) Only a small number of molecules have very high velocity
(d) Between collisions the molecules move in straight lines with constant velocities
Solution. Correct options: (a), (b), (c), (d). All are assumptions of kinetic theory of gases and Maxwell probable distribution of molecular speeds.
Teacher's Note: Elastic collisions, straight-line motion between collisions and the Maxwell tail are all part of the model.
Exam Note: Heavier molecules carry more momentum per hit.
Multiple-Correct Question 15. Which of the following are correct statements:
(a) Higher is TC/PC, larger is excluded volume
(b) Higher is VC, larger is excluded volume
(c) Higher is TC/VC, more is van der Waals' constant for attraction
(d) Smaller is size of molecule, lesser will be excluded volume
Solution. Correct options: (a), (b), (c), (d). TC = 8a/(27Rb); VC = 3b; PC = a/(27b²); and excluded volume b = 4 × N × v.
Teacher's Note: T_c/P_c = 8b/R and V_c = 3b both scale with b; b = 4Nv scales with molecular size.
Exam Note: Link T_c/P_c and V_c to b.
Multiple-Correct Question 16. Select the correct statements for ideal gas:
(a) Joule Thomson coefficient for ideal gas is zero
(b) Ideal gas does not have intermolecular attractions among their molecules
(c) Ideal gas can never be liquefied
(d) Gaseous phase can not exist at zero kelvin
Solution. Correct options: (a), (b), (c), (d). All are facts.
Teacher's Note: No intermolecular attraction means no J-T effect and no liquefaction; all motion stops at 0 K.
Exam Note: Ideal gas: no attraction, no volume, no liquefaction.
Multiple-Correct Question 17. Select the correct statement:
(a) Temperature does not change during phase transition equilibria
(b) Kinetic energy of liquid molecules is directly proportional to temperature
(c) Liquid phase does not exist above critical temperature
(d) The density of gas and liquid phase is equal at critical condition
Solution. Correct options: (a), (b), (c), (d). All are facts.
Teacher's Note: During a phase change T stays fixed; above T_c no liquid forms; densities merge at T_c.
Exam Note: Densities of both phases are equal at the critical point.
Multiple-Correct Question 18. Select the correct statements:
(a) Random molecular motion by gaseous molecules is confirmed by diffusion
(b) The boiling point of liquid N2 is −196°C
(c) He is the only noble gas which does not behave ideally at any condition.
(d) Pressure of gas calculated by using van der Waals' equation is smaller than the pressure calculated by using ideal gas equation.
Solution. Correct options: (a), (b), (c), (d), as given in the book's key (printed as —do— referring to Question 16). Flagged for human check: statement (c) is as printed in the book.
Teacher's Note: Diffusion shows random motion, N₂ boils at −196°C, and attractions make van der Waals pressure smaller than ideal pressure.
Exam Note: Attraction lowers real pressure below ideal.
Comprehension Based Problems
Comprehension 1: Gases show ideal gas behaviour in Boyle temperature range. Assume for the air this temperature range between 300 K to 900 K. An open vessel at 27°C is heated until 3/5th of the air in it has been expelled. Assuming that the volume of the vessel remains constant,
Comprehension 1, Question 1. The temperature at which vessel was heated.
(a) 750 K
(b) 600 K
(c) 500 K
(d) 400 K
Solution. Correct option: (a). Let initial mole of gas at 27°C be n. On heating 3/5 mole of air escaped out at temperature T. Thus, mole of air left at temperature T = n − (3/5)n = 2n/5. Under similar conditions of P and V: n1T1 = n2T2, n × 300 = (2n/5) × T, ∴ T = 750 K.
Teacher's Note: In an open vessel at constant P and V, n·T stays constant; 2/5 of the moles remain.
Exam Note: nT = constant for an open vessel.
Comprehension 1, Question 2. The air escaped out if vessel is heated to 900 K.
(a) n
(b) n/3
(c) 2n/3
(d) n/2
Solution. Correct option: (c). At T1 = 300 K, no. of mole = n; T2 = 900 K, no. of mole = n1. ∴ 300 × n = 900 × n1, ∴ n1 = n/3. ∴ No. of mole escaped out = n − n/3 = 2n/3 mol.
Teacher's Note: Moles left are inversely proportional to T, so one third remain at 900 K.
Exam Note: Left = n × 300/900 = n/3.
Comprehension 1, Question 3. The temperature at which half of the air escapes out at.
(a) 750 K
(b) 600 K
(c) 500 K
(d) 400 K
Solution. Correct option: (b). When half of the air escaped out at temperature T, then n2 = n/2: n × 300 = (n/2) × T, ∴ T = 600 K = 327°C.
Teacher's Note: Half left means doubling the absolute temperature from 300 K.
Exam Note: n₁T₁ = n₂T₂ with n₂ = n/2.
Comprehension 2: Gaseous pressure is measured by barometer. The barometric tube must be exactly vertical, otherwise the pressure reading will not be accurate. A 10 cm column of air is trapped by a column of Hg of 8 cm long. The capillary tube is horizontally fixed at 1 atm pressure. Calculate the length of air column when the tube is fixed at same temperature:
Comprehension 2, Question 1. The pressure of air measured when tube is held vertically with open end up is:
(a) 11.61 cm
(b) 9.05 cm
(c) 11.18 cm
(d) 10.18 cm
Solution. Correct option: (b). P1V1 = P2V2, or P1l1a = P2l2a (a = tube cross-section; air column 10 cm, Hg column 8 cm). P2 = 76 + 8 = 84 cm; ∴ l2 = P1l1/P2 = (76 × 10)/84 = 9.05 cm. (The printed question calls this quantity 'pressure of air' but the options are the air-column lengths.)
Teacher's Note: Mercury on top adds 8 cm to the 76 cm pressure, so the air column shortens by Boyle's law.
Exam Note: Boyle's law with P₂ = 76 + 8.
Comprehension 2, Question 2. The pressure of air (in cm) when tube is held vertically with open end down.
(a) 11.61
(b) 9.6
(c) 11.18
(d) 10.3
Solution. Correct option: (c). P1l1a = P2l2a, P2 = 76 − 8 = 68 cm. ∴ l2 = P1l1/P2 = (76 × 10)/68 = 11.18 cm.
Teacher's Note: Open end down: gas pressure is 76 − 8 = 68 cm, so the column lengthens.
Exam Note: Boyle's law with P₂ = 76 − 8.
Comprehension 2, Question 3. The pressure of air (in cm) when tube is held at 45° from horizontal with open end up.
(a) 9.3
(b) 10.3
(c) 11.3
(d) 11.61
Solution. Correct option: (a). When the tube is held at 45° with open end up, the mass of Hg is borne partially by the gas and partially by the Hg, i.e. a measure of additional pressure on gas; the vertical height of Hg is l = 8/√2. Also P2l2a = P1l1a, ∴ l2 = P1l1/P2 = (76 × 10)/(76 + 8/√2) = 9.3 cm.
Teacher's Note: Only the vertical height of mercury (8 cos 45° = 5.66 cm) adds to the pressure at 45°.
Exam Note: Use vertical height 8/√2.
Comprehension 3: An open glass bulb containing air was heated from 27°C to 227°C.
Comprehension 3, Question 1. If 200 mL of air measured at 227°C was expelled during heating, the volume of bulb must be .....
(a) 500
(b) 400
(c) 300
(d) 200
Solution. Correct option: (c). Let volume of bulb be V mL. Volume of air at 300 K = V mL. After heating, volume of air at 500 K = V + 200 mL. V1/T1 = V2/T2 (at constant P): V/300 = (V + 200)/500, ∴ V = 300 mL.
Teacher's Note: The air at 300 K expands to V + 200 mL at 500 K (Charles' law).
Exam Note: Use V/300 = (V + 200)/500.
Comprehension 3, Question 2. If 200 mL of air measured at 27°C was expelled during heating, the volume of bulb must be:
(a) 200
(b) 300
(c) 400
(d) 500
Solution. Correct option: (d). Let volume of bulb be V mL. Volume of air at 300 K given out = 200 mL, or 200/300 = V2/500, ∴ V2 = 100000/300 mL. ∴ Volume of air at 500 K = V + 100000/300. Therefore V/300 = (V + 100000/300)/500; ∴ V = 500 mL.
Teacher's Note: Convert expelled 200 mL at 300 K to its volume at 500 K, then use Charles' law.
Exam Note: Convert expelled volume to 500 K first.
Comprehension 4: Ideal gas equation is represented as PV = nRT. Gases present in universe were found ideal in the Boyle's temperature range only and deviated more from ideal gas behaviour at high pressure and low temperature. The deviations are explained in terms of compressibility factor Z. For ideal behaviour Z = PV/nRT = 1. The main cause to show deviations were due to wrong assumptions made about forces of attractions (which becomes significant at high pressure) and volume occupied by molecules V in PV = nRT is supposed to be volume of container in which gas is placed by assuming that gaseous molecules do not have appreciable volume. Actually volume of the gas is that volume in which each molecule of a gas can move freely. If volume occupied by gaseous molecule is not negligible, then the term V should be replaced by the ideal volume which is available for free motion of each molecules of gas in 1 mole gas: Vactual = volume of container − volume occupied by molecules = V − b, where b represents the effective volume of co-volume or excluded volume occupied by molecules present in one mole of gas. Similarly for n mole gas Vactual = V − nb. The excluded volume can be calculated by considering bimolecular collisions. The excluded volume is the volume occupied by the sphere of 2r for each pair of molecule. Thus, excluded volume for one pair of molecules = (4/3)π(2r)³ = 4 × 8πr³/3 ...(i) [figure: two touching spheres of radius r with a sphere of radius 2r drawn around the pair, marked 'Excluded volume']. ∴ excluded volume for 1 molecule = (2/3) × 8πr³ ...(ii) = 4 × ((4/3)πr³) = 4 × volume of one molecule = 4v. ∴ excluded volume for N molecules = 4Nv = b (b = 4Nv, where N is Avogadro's No.)
Comprehension 4, Question 1. Which of the following statements are correct?
I. Larger is the value of Tc/Pc for a gas larger would be its excluded volume.
II. Larger is the excluded volume of gas, more will be its critical volume.
III. The slope for an isochore obtained for a gas showing P(V − b) = RT is R/(V − b).
IV. The excluded volume for He is more than H2.
(a) I, II, III
(b) I, II, IV
(c) II, III, IV
(d) III, IV
Solution. Correct option: (a). Vc = 3b, Tc = 8a/(27Rb), Pc = a/(27b²), so Tc/Pc = 8b/R (I true) and Vc = 3b (II true); III is true since P = [R/(V − b)]T. Also, b for He = 0.1142 litre mol−1 and b for H2 is 0.1460 litre mol−1 (as printed in the book), so IV is false.
Teacher's Note: T_c/P_c = 8b/R and V_c = 3b both grow with b; He has the smaller excluded volume of the pair.
Exam Note: Express T_c/P_c and V_c through b.
Comprehension 4, Question 2. As the pressure approaching zero i.e., at very low pressure, the curves plotted between compressibility factor Z and P for n mole of gases can be seen with the following characteristics:
I. The intercept on y-axis leads to a value of unity
II. The intercept on y-axis leads to a value of 'n'
III. The curves possess same slope for different gases at same temperature
IV. The curves possess different slopes for different gases at same temperature
V. The curves possess same slope for a gas at different temperatures
(a) I, IV, V
(b) II, III
(c) II, III, IV
(d) II, III, V
Solution. Correct option: (a). PV/nRT = Z. At very low P or P → 0, Z = 1 since ideal gases. Also, as the temperature increases Z approaches unity. (Flagged: statement V as listed in the book's option (a) does not follow from Z = 1 + (b − a/RT)P/RT; the book's key is (a).)
Teacher's Note: As P → 0, Z → 1 for every gas; the initial slope (b − a/RT)/RT differs between gases.
Exam Note: Intercept is 1; slopes differ gas to gas.
Comprehension 4, Question 3. Assuming the molecules of gas have hard sphere of radius 2.0×10−10 m the fraction of volume occupied by the molecules to the total volume of a given mass of gas at 27°C and at 1 bar pressure and 10 bar pressure respectively, are:
(a) 99.9%, 99%
(b) 0.082%, 0.82%
(c) 99%, 90%
(d) 1%, 10%
Solution. Correct option: (b). At P = 1 bar: volume of gas = nRT/P = (n × 0.0821 × 300)/1 = 24.63 × n L. Volume of molecules = n × NA × (4/3)πr³ = n × 6.023×1023 × (4/3) × 3.14 × (2.0×10−8 cm)³ = 20.17 × n cm³ = 0.0202 × n L. Vm/Vg = 0.0202n/(24.63n) = 8.2×10−4 = 8.2×10−2% = 0.082%. At P = 10 bar: volume of gas = (n × 0.0821 × 300)/10 = 2.463 × n L, so Vm/Vg = 0.0202/2.463 = 8.2×10−3 = 0.82%.
Teacher's Note: Fraction occupied = molecular volume ÷ nRT/P; it grows tenfold when pressure rises tenfold.
Exam Note: Volume fraction ∝ P at fixed T.
Comprehension 4, Question 4. The compressibility factor for N2 at −50°C and 800 atm pressure is 1.95. The mole of N2 required to fill up a balloon of 100 L capacity are:
(a) 2.24×103 L
(b) 2.24×102 L
(c) 2.24 L
(d) 22.4 L
Solution. Correct option: (a) (value 2.24×103, in mole). Z = PV/nRT, ∴ n = (800 × 100)/(1.95 × 0.0821 × 223) = 2.24×103.
Teacher's Note: Rearrange Z = PV/nRT; T = 223 K for −50°C.
Exam Note: Z multiplies RT in the denominator.
Comprehension 4, Question 5. Which of the following statements are correct?
I. Rise in compressibility factor Z with increase in pressure is due to 'a'
II. Rise in compressibility factor Z with increase in pressure is due to 'b'
III. Ideal gas do not exist but is a useful concept
IV. For 1 mole of a van der Waals' gas, Z = 1 + bP/RT − a/RTV + ab/RTV².
(a) I, II, III, IV
(b) II, III, IV
(c) I, III, IV
(d) I, IV
Solution. Correct option: (b). These are facts: the rise of Z with pressure is due to b (excluded volume), not a.
Teacher's Note: Z rises because of the excluded volume b; a lowers Z.
Exam Note: Rise in Z means b, fall in Z means a.
Comprehension 4, Question 6. The ratio of coefficient of thermal expansion α = (1/V)(∂V/∂T)P and the isothermal compressibility K = −(1/V)(∂V/∂P)T for an ideal gas is:
(a) −P/T
(b) P/T
(c) T/P
(d) −T/P
Solution. Correct option: (b). PV = RT, ∴ P∂V = R·∂T, or (∂V/∂T)P = R/P = V/T, so α = (1/V)(∂V/∂T)P = 1/T. Also P·∂V + V·∂P = 0, ∴ (∂V/∂P)T = −V/P, or K = −(1/V)(∂V/∂P)T = 1/P. So α/K = P/T.
Teacher's Note: Differentiate PV = RT at constant P and at constant T to get α = 1/T and K = 1/P.
Exam Note: α = 1/T, K = 1/P, ratio P/T.
Statement Explanation Problems
Codes: (a) S is correct but E is wrong. (b) S is wrong but E is correct. (c) Both S and E are correct and E is correct explanation of S. (d) Both S and E are correct but E is not correct explanation of S.
Statement Explanation Question 1. S: The product of pressure and volume of a fixed mass of gas is independent of temperature.
E: The product of P and V depends upon temperature.
Solution. Answer (b): S is wrong but E is correct. PV = nRT: the product depends on T, so S is wrong and E is correct.
Teacher's Note: PV = nRT, so for fixed n the product PV is proportional to T.
Exam Note: Statement false, reason true.
Statement Explanation Question 2. S: The increase in compressibility factor with increasing pressure is due to a.
E: Z = 1 + bP/RT for real gases can be obtained by neglecting a/V² term in van der Waals' equation.
Solution. Answer (b): S is wrong but E is correct. At high pressure Z = 1 + bP/RT, so the rise in Z is due to b, not a; E is correct.
Teacher's Note: Z rises with P because of the excluded volume b; a/V² terms lower Z.
Exam Note: a lowers Z; b raises Z.
Statement Explanation Question 3. S: A gas can be liquefied at T = Tc and P < Pc.
E: A gas can be liquefied when T < Tc and P < Pc.
Solution. Answer (b): S is wrong but E is correct. At T = Tc, liquefaction is possible only at P = Pc; so S is wrong and E is correct.
Teacher's Note: At T_c a gas liquefies only at P_c; below T_c liquefaction occurs at the vapour pressure.
Exam Note: T_c: liquefaction needs P ≥ P_c.
Statement Explanation Question 4. S: The gas is heated, if its temperature is less than inversion temperature in Joule-Thomson effect.
E: Heating effect in gas is noticed during Joule-Thomson effect when T > Ti.
Solution. Answer (b): S is wrong but E is correct. Above the inversion temperature, J-T gives negative μ (heating); below it, cooling. So S is wrong and E correct.
Teacher's Note: Below T_i the J-T effect cools the gas; above T_i it heats.
Exam Note: Cooling below T_i, heating above.
Statement Explanation Question 5. S: It is not possible to liquefy an ideal gas.
E: There exist no forces of attraction among the molecule of ideal gas.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is the correct reason for S.
Teacher's Note: With no intermolecular attractions there is nothing to hold molecules together as a liquid.
Exam Note: No attraction, hence no liquefaction.
Statement Explanation Question 6. S: All molecules in a gas are moving with same speed.
E: Speed of molecules in a gas follows Maxwell's distribution law.
Solution. Answer (b): S is wrong but E is correct. It is a fact that speeds follow the Maxwell distribution law, so S is wrong and E is correct.
Teacher's Note: Molecular speeds are spread by the Maxwell distribution; one speed for all is false.
Exam Note: Maxwell distribution means many speeds.
Statement Explanation Question 7. S: Average speed of molecules, if a gas in a container moving only in one dimension, will be zero.
E: The molecules of gas are not collected in one direction.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E explains S: molecular motion is random, not along one direction, so average velocity vanishes.
Teacher's Note: Random motion in both directions cancels, so the mean velocity is zero.
Exam Note: Average velocity zero, average speed not.
Statement Explanation Question 8. S: The fraction of molecules having speed in the range u and (u + du) of a gas of molar mass M at temperature T is the same as that of gas of molar mass 2M and temperature T/2.
E: The fraction of molecules having their speed within the range u to (u + du) ∝ M/T.
Solution. Answer (b): S is wrong but E is correct. Follow Maxwell distribution law: the fraction depends on M/T, which differs here (M/T versus 4M/T), so S is wrong and E is correct.
Teacher's Note: The Maxwell fraction depends on M/T; doubling M and halving T makes it four times larger.
Exam Note: Compare M/T for the two cases.
Statement Explanation Question 9. S: Energy can be transferred between gaseous molecules during collisions but urms remains constant.
E: The average kinetic energy of gaseous molecules remains constant as long as temperature is constant and therefore, urms remains unchanged during collision.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Both correct and E explains S.
Teacher's Note: Collisions exchange energy but the average stays fixed at fixed T, so u_rms is constant.
Exam Note: Average K.E. fixed by T alone.
Statement Explanation Question 10. S: The compressibility factor for H2 and He is [1 + Pb/RT].
E: The compressibility factor for H2 and He can be derived from van der Waals' equation.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. [P + a/V²][V − b] = RT; for H2 and He, a is very small because of low molar mass. Thus, PV = RT + Pb. Now Z = PV/RT = [1 + Pb/RT]. E explains S.
Teacher's Note: a is negligible for H₂ and He, so van der Waals reduces to PV = RT + Pb.
Exam Note: Neglect a for H₂ and He.
Statement Explanation Question 11. S: The numerical values of Pc, Vc, Tc are a/(27b²), 3b and 8a/(27Rb) respectively.
E: The compressibility factor Z at critical conditions is 3/8.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. RTc/(PcVc) = R × 8a × 27b²/(27Rb × a × 3b) = 8/3, so Zc = 3/8. Both are facts, but E does not explain S.
Teacher's Note: Both critical constants and Z_c = 3/8 follow from van der Waals, but one does not explain the other.
Exam Note: Z_c = P_cV_c/RT_c = 3/8.
Statement Explanation Question 12. S: The numerical value of a for H2O is higher than C6H6.
E: H2O shows H-bonding.
Solution. Answer (b): S is wrong but E is correct. a is more for C6H6 due to high molar mass of C6H6. So S is wrong and E is correct.
Teacher's Note: Benzene's large molar mass gives it a larger a than water despite hydrogen bonding.
Exam Note: Data: a(C₆H₆) is larger than a(H₂O).
Statement Explanation Question 13. S: At low pressure van der Waals' equation is reduced to [P + a/V²]V = RT.
E: The compressibility factor corresponding to low pressure is given by: 1 − RTV/a.
Solution. Answer (a): S is correct but E is wrong. PV + a/V = RT, ∴ PV = RT − a/V; thus Z = PV/RT = [1 − a/(RTV)]. S is correct, but E as printed (1 − RTV/a) is wrong.
Teacher's Note: At low P, b is negligible and Z = 1 − a/RTV; E inverts the fraction.
Exam Note: Z = 1 − a/(RTV), not RTV/a.
Statement Explanation Question 14. S: Molar specific heat at constant volume of an ideal diatomic gas is [(3/2)R + R].
E: On heating one mole of an ideal diatomic gas at constant pressure by 1°C rise in temperature, the increase in internal energy of gas is (7/2)R.
Solution. Answer (a): S is correct but E is wrong. Corrected: S is correct (Cv = (5/2)R for an ideal diatomic gas, without vibration). E is wrong: ΔU = CvΔT = (5/2)R, not (7/2)R (that is Cp). The book prints (d); flagged for human check.
Teacher's Note: ΔU depends on C_v only: 5R/2 per kelvin; 7R/2 is the heat absorbed at constant pressure.
Exam Note: ΔU = nC_vΔT, even at constant P.
Statement Explanation Question 15. S: A vacuum is a space from which almost all gas has been removed.
E: A vacuum is produced by pumping out all the air and other gases.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is the correct reason for S.
Teacher's Note: Pumping out air and gases is how a vacuum is produced.
Exam Note: Vacuum: almost all gas removed.
Statement Explanation Question 16. S: Gaseous molecules are assumed to be 'point masses' occupying no volume.
E: Gaseous molecules suffer no energy loss due to friction.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. Both are facts, but E does not explain S.
Teacher's Note: Point-mass assumption and perfectly elastic collisions are separate postulates of the kinetic theory.
Exam Note: Two independent kinetic-theory postulates.
Statement Explanation Question 17. S: Compressibility factor Z according to van der Waals' equation may be written as Z = 1/(1 − nb/V) − an/(RTV).
E: For real gases Z ≷ 1.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. Both are facts, but E does not explain S.
Teacher's Note: Z from van der Waals equals 1/(1−nb/V) − an/RTV; Z above or below 1 is a general fact.
Exam Note: Both true, no causal link.
Statement Explanation Question 18. S: P(V − b) = RTe−a/RTV is called Dieterici equation of state.
E: Dieterici equation and van der Waals' equation both reduce to same expression of pressure at low densities.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. Both are facts, but E does not explain S.
Teacher's Note: The Dieterici equation is a named equation of state; both equations agree at low density.
Exam Note: Name versus low-density limit: unrelated facts.
Statement Explanation Question 19. S: At low temperature (say 0°C) the effect of attractive forces dominates for CO2, CH4 and N2, whereas the molecular size effect dominates for H2 and He to explain deviations.
E: Z > 1 for H2 and He, whereas Z < 1 for CO2, CH4 and N2.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is the correct reason for S.
Teacher's Note: Z < 1 reflects attraction (CO₂, CH₄, N₂); Z > 1 reflects molecular size (H₂, He).
Exam Note: Z < 1: attraction; Z > 1: size.
Statement Explanation Question 20. S: An ideal gas is not expected to show any cooling on free expansion.
E: Ideal gas does not exist but is useful concept.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. Both are facts, but E does not explain S.
Teacher's Note: Absence of attractions, not non-existence, explains no cooling on free expansion.
Exam Note: Both facts, but unrelated as reason.
Statement Explanation Question 21. S: CO and N2 have the same speed distribution at the same temperature.
E: Both have same molar mass.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is the correct reason for S.
Teacher's Note: Maxwell speed distribution depends only on M and T; CO and N₂ both have M = 28.
Exam Note: Same M and T: same distribution.
Statement Explanation Question 22. S: Speed distribution of O2 at T K is same as for SO2 at 2T K.
E: u ∝ √(T/M).
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is the correct reason for S (T/M is equal for O2 at T and SO2 at 2T).
Teacher's Note: Speed distribution depends on T/M; O₂ at T and SO₂ at 2T give the same ratio.
Exam Note: Same T/M gives same distribution.
Statement Explanation Question 23. S: Density of argon at STP is 1.7857 g/L.
E: Specific gravity of argon at STP is 1.3842.
Solution. Answer (d): Both S and E are correct but E is not correct explanation of S. Density at STP = mass/V = 40/22.4 = 1.7857 g L−1. Specific gravity at STP = density of Ar/density of air = 1.7857/1.29 = 1.3842. Both are facts but E does not explain S.
Teacher's Note: Density is M/22.4; specific gravity divides by air density 1.29 g/L.
Exam Note: Specific gravity = d(gas)/d(air).
Statement Explanation Question 24. S: If the temperature of a sample of gas is increased from 25°C to 50°C, the volume of gas will increase by 100 per cent.
E: The volume of the given mass of a gas is directly proportional to absolute temperature.
Solution. Answer (b): S is wrong but E is correct. V ∝ T (Kelvin): volume rises by 25/298 ≈ 8.4%, not 100%. S wrong, E correct.
Teacher's Note: Charles' law needs kelvin: 298 K to 323 K is only about 8% increase.
Exam Note: Always convert to kelvin.
Statement Explanation Question 25. S: The pressure of wet gas is reduced to half, if its volume is doubled.
E: Aqueous tension remains constant at constant pressure.
Solution. Answer (b): S is wrong but E is correct. Saturated vapours do not obey gas laws, so S is wrong and E is correct.
Teacher's Note: Water vapour pressure is fixed by T, so the wet-gas pressure does not simply halve.
Exam Note: Aqueous tension is fixed by temperature.
Statement Explanation Question 26. S: The value of van der Waals' constant a is larger for NH3 than for N2.
E: NH3 shows H-bonding.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. E is correct reason for statement.
Teacher's Note: Hydrogen bonding strengthens NH₃ attractions, raising a.
Exam Note: H-bonding raises a.
Statement Explanation Question 27. S: The pressure of fixed amount of an ideal gas is proportional to its temperature.
E: Frequency of collisions and their impact both increase in proportion to square root of temperature.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Corrected: both statements are correct and E explains S (collision frequency ∝ √T and momentum per collision ∝ √T, so P ∝ T). The book prints (d); flagged for human check.
Teacher's Note: Pressure = collision rate × momentum per collision, each ∝ √T, so P ∝ T.
Exam Note: Both factors scale as √T.
Statement Explanation Question 28. S: For H2 and He, Z vs. P plots are linear throughout with positive slope.
E: van der Waals' constant 'a' is minimum for these gases.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Explanation is correct reason for statement.
Teacher's Note: With a negligible, Z = 1 + bP/RT is linear in P with positive slope.
Exam Note: Small a: Z rises linearly with P.
Statement Explanation Question 29. S: Compressibility factor 'Z' for van der Waals' gases at critical conditions shows more deviations than normal conditions, i.e. Z = 3/8.
E: At critical conditions van der Waals' equation is not accurate.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Explanation is correct reason for statement.
Teacher's Note: At the critical point Z = 3/8 shows large deviation because van der Waals is only approximate there.
Exam Note: Z_c = 3/8, far from 1.
Statement Explanation Question 30. S: Rise in compressibility factor with increasing pressure is due to a.
E: Z = 1 + Pb/RT, when Z > 1.
Solution. Answer (b): S is wrong but E is correct. The rise in compressibility factor with increase in pressure is due to b. S wrong, E correct.
Teacher's Note: Z > 1 arises from b as in Z = 1 + Pb/RT; a lowers Z.
Exam Note: Rise in Z is due to b.
Statement Explanation Question 31. S: The gas on subjecting to Joule-Thomson effect gets heated if its temperature is less than its inversion temperature.
E: Heating effect has Joule-Thomson coefficient −ve.
Solution. Answer (b): S is wrong but E is correct. If T < Ti then cooling effect μ = +ve; if T > Ti then heating effect μ = −ve. S wrong, E correct.
Teacher's Note: Below T_i, μ is positive and the gas cools; heating goes with negative μ above T_i.
Exam Note: Negative μ means heating.
Statement Explanation Question 32. S: Liquefaction of a gas is a continuous process with increase in pressure below Tc.
E: Liquefaction of a gas is a discontinuous process with increase in pressure below Tc.
Solution. Answer (b): S is wrong but E is correct. Corrected: following Andrews' studies on CO2, below Tc liquefaction is discontinuous (a sudden change at the vapour pressure), so S is wrong and E is correct. The book prints (a); flagged for human check.
Teacher's Note: Below T_c, compression gives an abrupt gas-to-liquid change at the vapour pressure.
Exam Note: Andrews: discontinuous below T_c.
Statement Explanation Question 33. S: At STP or any identical temperature and pressure, the volume occupied by a definite mass of any gas are identical.
E: Equal mole of any monoatomic gas at same temperature have same average kinetic energy.
Solution. Answer (b): S is wrong but E is correct. Definite mole and not definite mass. S wrong, E correct.
Teacher's Note: Equal moles, not equal masses, occupy equal volumes at the same T and P.
Exam Note: Avogadro's law concerns moles.
Statement Explanation Question 34. S: On heating a sample of gas collision frequency increases.
E: Heat is produced by the collision of gas molecules against each other.
Solution. Answer (a): S is correct but E is wrong. Collisions are perfectly elastic, however kinetic energy of molecule changes but average kinetic energy remains unchanged. S correct, E wrong.
Teacher's Note: Heating raises speeds and collision frequency; collisions themselves do not produce heat.
Exam Note: Elastic collisions generate no heat.
Statement Explanation Question 35. S: The coefficient of isothermal expansion at critical point is zero.
E: (∂Vc/∂Tc)P,n = 0.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. α = (1/Vc)(∂Vc/∂Tc)P,n; Vc, Tc, Pc are constant at critical conditions (book's key; flagged for human check).
Teacher's Note: As given in the book, the critical constants are treated as fixed numbers so the derivative is zero.
Exam Note: Follow the book's key.
Statement Explanation Question 36. S: Compressibility factor 'Z' for H2 is lower than CO2.
E: CO2 has higher molar mass than H2.
Solution. Answer (b): S is wrong but E is correct. Z for H2 > Z for CO2. S wrong, E correct.
Teacher's Note: H₂ has Z > 1 (size effect) while CO₂ has Z < 1 (attraction) at ordinary conditions.
Exam Note: H₂: Z > 1; CO₂: Z < 1.
Statement Explanation Question 37. S: If two gases have same values of 'b' but different 'a', then the gas having a larger value of 'a' will occupy lesser volume.
E: The gas with a larger value of 'a' have higher force of attraction.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Explanation is correct explanation for statement.
Teacher's Note: Stronger attraction (larger a) pulls molecules closer, giving a smaller volume at the same P and T.
Exam Note: Larger a means smaller volume.
Statement Explanation Question 38. S: If two gases have same values of 'a' but different values of 'b' then the gas having lesser value of 'b' will show higher compressibility.
E: The gas with smaller value of b will occupy lesser volume.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Explanation is correct explanation for statement.
Teacher's Note: Smaller b means a smaller excluded volume, so the gas can be compressed more.
Exam Note: Smaller b: more compressible.
Statement Explanation Question 39. S: Poisson's ratio of atmospheric gases is approximately equal to 1.4.
E: Gases present in atmosphere are mainly diatomic.
Solution. Answer (c): Both S and E are correct and E is correct explanation of S. Explanation is correct for statement. γ = Cp/Cv = 1.4 for diatomic gases. Atmosphere mainly contains N2 and O2.
Teacher's Note: Air is mostly diatomic N₂ and O₂, whose γ = 7/5 = 1.4.
Exam Note: Diatomic gas: γ = 1.4.
Statement Explanation Question 40. S: The heat absorbed during the isothermal expansion of an ideal gas against vacuum is zero. (IIT 2000)
E: The volume occupied by the molecules of an ideal gas is zero.
Solution. Answer (a): S is correct but E is wrong. ΔU = q − w. For isothermal expansion, ΔU = 0 and w = 0 because w = PΔV (at P = 0). S correct. The volume occupied by the molecules of an ideal gas is not zero but negligible, so E is wrong.
Teacher's Note: Against vacuum w = 0 and ΔU = 0, so q = 0; molecular volume is negligible, not zero.
Exam Note: Free expansion: w = 0, q = 0.
Matching Type Problems
| List-A | List-B |
|---|---|
| A. Kinetic energy of 1 mole gas | 1. √(2KE/M) |
| B. Root mean square speed | 2. 3PV/2 |
| C. Average speed | 3. √(8P/πd) |
| D. Most probable speed | 4. √(4KE/3M) |
Solution. Answer (from key): A–2; B–1; C–3; D–4.
K.E. of 1 mole = (3/2)RT = 3PV/2 (A–2). urms = √(3RT/M) = √(2KE/M) (B–1). uav = √(8RT/πM) = √(8P/πd) (C–3). ump = √(2RT/M) = √(4KE/3M) (D–4).
Teacher's Note: Express each speed through KE = 3RT/2 or PV = RT to match the forms.
Exam Note: Know u_mp : u_av : u_rms formulas.
| List-A | List-B |
|---|---|
| A. Boyle's temperature | 1. 8a/(27Rb) |
| B. Reduced temperature | 2. a/Rb |
| C. Inversion temperature | 3. 2a/Rb |
| D. Critical temperature | 4. T/Tc |
Solution. Answer (from key): A–2; B–4; C–3; D–1.
TB = a/Rb (A–2); reduced temperature = T/Tc (B–4); Ti = 2a/Rb (C–3); Tc = 8a/(27Rb) (D–1).
Teacher's Note: Boyle a/Rb, inversion 2a/Rb, critical 8a/27Rb: memorise the trio.
Exam Note: Inversion is twice Boyle temperature.
| List-A | List-B (curve shapes, drawn in the book) |
|---|---|
| A. PT vs T² plot for ideal gas at constant n and V (in K) | 1. Rising curve that is convex, steepening (like a parabola) |
| B. V vs 1/P² graph for ideal gas at constant n and T | 2. Straight line rising through the origin (dotted extension to the axis) |
| C. VT vs T² graph for ideal gas at constant n and P | 3. Falling curve, hyperbola-like |
| D. V vs 1/T graph for ideal gas at constant P and n | 4. Rising curve that is concave, flattening (like a square root) |
| E. V vs P graph for ideal gas at constant T and n | |
| F. 1/V² vs P graph for ideal gas at constant T and n |
Solution. Answer (from key): A–2; B–4; C–2; D–3; E–3; F–1.
A: PT = (nR/V)T², a straight line (2). B: V = K/P so V ∝ √(1/P²), concave rising curve (4). C: VT = (nR/P)T², straight line (2). D: V vs 1/T at constant P is V ∝ T but plotted against 1/T gives a falling hyperbola (3). E: Boyle's law, falling hyperbola (3). F: 1/V² ∝ P², convex rising parabola (1).
Teacher's Note: Rewrite each relation as y against x: straight line, √ curve, parabola or hyperbola.
Exam Note: Identify the power of x in each plot.
| List-A | List-B |
|---|---|
| A. Vacuum technology | 1. Television tube |
| B. Critical temperature | 2. Semiconductor |
| C. Andrew's studies on CO2 | 3. Liquefaction of gases |
| D. Dalton's law | 4. Tc = 8a/(27Rb) |
| E. Graham's law | 5. Moist gases |
| F. Vacuum | 6. Aqueous tension |
| 7. Effusion of gases | |
| 8. Diffusion of gases |
Solution. Answer (from key): A–1, 2; B–3, 4; C–3; D–5, 6; E–7, 8; F–1, 2, 7.
(The book prints the List-B item 4 as Tc = 8a/…Rb; taken here as 8a/(27Rb).) Vacuum technology is used in television tubes and semiconductors; critical temperature relates to liquefaction and Tc = 8a/27Rb; Andrews' CO2 isotherms relate to liquefaction; Dalton's law applies to moist gases and aqueous tension; Graham's law covers effusion and diffusion; vacuum is relevant to television tubes, semiconductors and effusion.
Teacher's Note: Link each law or concept to its use: Dalton to moist gases, Graham to effusion and diffusion.
Exam Note: Match by application, one-to-many allowed.
| List-A | List-B |
|---|---|
| A. (∂T/∂P)H | 1. Cv |
| B. (∂V/∂P)T | 2. Cp |
| C. (∂H/∂T)P | 3. μJ.T. |
| D. (∂U/∂V)T | 4. Zero for ideal gas |
| E. (∂U/∂T)V | 5. −V/P |
Solution. Answer (from key): A–3, 4; B–5; C–2; D–4; E–1.
(∂T/∂P)H = μJ.T., which is zero for an ideal gas (A–3, 4). (∂V/∂P)T = −V/P for an ideal gas (B–5). (∂H/∂T)P = Cp (C–2). (∂U/∂V)T = 0 for an ideal gas (D–4). (∂U/∂T)V = Cv (E–1).
Teacher's Note: Recognise each partial derivative: μ_JT, C_p, C_v, internal pressure, and the Boyle derivative.
Exam Note: Know each derivative's thermodynamic name.
| List-A | List-B |
|---|---|
| A. H2 (gas) at P = 200 atm, T = 273 K | 1. Z ≠ 1 |
| B. H2 (gas) at P → 0, T = 273 K | 2. Attractive forces predominate |
| C. CO2 gas at P = 1 atm, T = 273 K | 3. PV = nRT |
| D. Real gas with large molar volume | 4. P(V − nb) = nRT |
Solution. Answer (from key): A–1, 4; B–3; C–1, 2; D–3.
H2 at high pressure has Z > 1 and follows P(V − nb) = nRT (A). At P → 0 it follows PV = nRT (B). CO2 at 1 atm, 273 K has Z < 1 (≠ 1) because attractive forces predominate (C). A real gas with large molar volume behaves ideally, PV = nRT (D).
Teacher's Note: High P: repulsion and Z > 1 for H₂; low P or large V: ideal; CO₂: attractions dominate.
Exam Note: Large V or low P gives PV = nRT.
| List-A | List-B |
|---|---|
| A. H2 and He | 1. Z > 1 |
| B. CO2 | 2. Z < 1 |
| C. For a gas other than H2 and He at TB | 3. Z = 1 |
| D. For a gas when only repulsive forces predominates |
Solution. Answer (from key): A–1; B–1, 3; C–2; D–1.
Key as printed in the book. H2 and He have Z > 1 (A); a gas with only repulsive forces predominating has Z > 1 (D). The entries B–1, 3 and C–2 are printed in the key; they are flagged for human check because they cannot be verified from the list text alone.
Teacher's Note: H₂, He and repulsion-dominated gases show Z > 1; Boyle temperature marks Z → 1 at low pressure.
Exam Note: Z > 1 means repulsion dominates.
P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 2
Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 2
Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 1 Gaseous State Part 2 PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Detailed Calculation Guides for JEE
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.