Official OP Tandon Textbook Solutions: JEE Chemistry Chapter 14 Volumetric Analysis
Access comprehensive textbook solutions for Chapter 14 Volumetric Analysis using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Chemistry: Chapter 14 Volumetric Analysis
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 14 Volumetric Analysis - Solved Examples and Objective Illustrations (Examples 1-63)
Some Solved Examples
Question 1. When hydrogen gas was passed over 8.08 g of heated metal oxide, it was completely reduced and 1.8 g of water was formed: (a) What is the weight of oxygen in the metal oxide? (b) What is the equivalent mass of the metal?
Solution. (a) When hot metal oxide is treated with hydrogen, 1.8 g water is formed. 18 g H2O contains 16 g oxygen. Thus, 1.8 g H2O will contain 1.6 g oxygen.
(b) Equivalent mass is the weight of the metal that combines with 8 parts of oxygen to form its oxide. Mass of metal in its oxide = 8.08 − 1.6 = 6.48 g. Since 1.6 g oxygen combines with 6.48 g of metal, 8 g oxygen will combine with (6.48/1.6) × 8 = 32.4 g of metal. Thus, equivalent mass of metal = 32.4.
Teacher's Note: Oxygen in the oxide equals oxygen in the water formed; equivalent mass is metal combining with 8 g oxygen.
Exam Note: Show the 8 g oxygen scaling step for full marks.
Question 2. SO2 is oxidised to SO42− in acid medium. Calculate the equivalent mass of SO2.
Solution. SO2(g) + 2H2O → H2SO4 + 2H+ + 2e−. Oxidation number of S changes from +4 to +6, a change of 2. Equivalent mass of SO2 = molecular mass/2 = 64/2 = 32.
Teacher's Note: Equivalent mass for redox equals molar mass divided by change in oxidation number per molecule.
Exam Note: Write the oxidation numbers before dividing.
Question 3. What is the equivalent mass of: (a) H3PO4 when neutralised to HPO42− (b) HClO4 (c) NaIO3 when reduced to I− (d) NaIO3 when reduced to I2 (e) Al(OH)3?
Solution. (a) Molecular mass of H3PO4 = 3 + 31 + 64 = 98 g. On neutralisation to HPO42−, two H+ ions are replaced. Eq. mass = 98/2 = 49.0 g.
(b) HClO4 contains one replaceable hydrogen atom. Eq. mass = 100.5/1 = 100.5.
(c) NaIO3 → I−: oxidation number changes from +5 to −1, change = 6. Mol. mass of NaIO3 = 23 + 127 + 48 = 198 g. Eq. mass = 198/6 = 33.0.
(d) NaIO3 → I2: oxidation number changes from +5 to 0, change = 5. Eq. mass = 198/5 = 39.6.
(e) The acidity of Al(OH)3 is 3. Eq. mass = 78/3 = 26.0 g.
Teacher's Note: Equivalent mass depends on the reaction: replaceable H+ count or oxidation-number change.
Exam Note: Same compound, different product gives different equivalent mass.
Question 4. Calculate the number of millimoles and milliequivalents of Cr2O72− ions in acid medium when 100 mL of 0.01 M Cr2O72− is reduced to Cr3+ by Fe2+.
Solution. Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O (1 mol takes 6 mol e−). Therefore 0.01 M Cr2O72− ≡ 0.06 N Cr2O72−. Number of millimoles = M × V = 0.01 × 100 = 1. Number of milliequivalents = N × V = 0.06 × 100 = 6.
Teacher's Note: N = M × n-factor; here n-factor is 6.
Exam Note: State the n-factor from the half-reaction.
Question 5. Give the relation between molecular mass (M) and equivalent mass (E) of the underlined species in the following reactions: (a) H3PO4 + Ca(OH)2 → CaHPO4 + 2H2O (b) H2O2 + MnO4− → Mn2+ + O2 + H2O (c) 4H3PO3 → 3H3PO4 + PH3 (d) HC≡CH + 2Na → NaC≡CNa + H2. (Underlined species: H3PO4 in (a), H2O2 in (b), H3PO3 in (c), HC≡CH in (d).)
Solution. (a) Basicity of H3PO4 in this reaction = 2, so E = M/2.
(b) H2O2 → O2: oxygen changes from −1 to 0 per atom; change in oxidation number per molecule = 2, so E = M/2.
(c) In H3PO3 → H3PO4, P changes from +3 to +5: change = 2, so E1 = M/2. In H3PO3 → PH3, P changes from +3 to −3: change = 6, so E2 = M/6. Overall equivalent mass = E1 + E2 = M/2 + M/6 = 4M/6 = 2M/3.
(d) Acetylene loses two hydrogen atoms (basicity = 2), so E = M/2.
Teacher's Note: Disproportionation: equivalent mass combines oxidation and reduction n-factors; (c) gives 2M/3.
Exam Note: In disproportionation, add the reciprocal n-factors: M/2 + M/6.
Question 6. Determine the number of g equivalents of solute in (a) 100 mL of 5 N HCl (b) 250 mL of 0.1 N Na2CO3.
Solution. Number of g equivalents = Normality × Volume of solution (litres). (a) For HCl = 5 × 100/1000 = 0.5. (b) For Na2CO3 = 0.1 × 250/1000 = 0.025.
Teacher's Note: Gram equivalents = N × V in litres; convert mL first.
Exam Note: Convert mL to litres before multiplying.
Question 7. What volumes of 12 N HCl and 3 N HCl must be mixed to form one litre 6 N HCl?
Solution. Let x mL of 12 N HCl and y mL of 3 N HCl be mixed to form one litre 6 N HCl. So, x + y = 1000 ... (i). Applying N1V1 + N2V2 = N3V3: 12x + 3y = 6 × 1000 ... (ii). Putting y = (1000 − x) in (ii): 12x + 3(1000 − x) = 6000, i.e. 9x = 3000, x = 3000/9 = 333.3 mL. y = 1000 − 333.3 = 666.7 mL. i.e., 333.3 mL 12 N HCl and 666.7 mL 3 N HCl are mixed.
Teacher's Note: Mixing without reaction conserves total equivalents: N1V1 + N2V2 = N3V3.
Exam Note: Write both volume and equivalent balance equations.
Question 8. (a) What is the normality of a 96 per cent solution of H2SO4 of specific gravity 1.84? (b) How many mL of 96 per cent sulphuric acid solution is necessary to prepare one litre 0.1 N H2SO4? (c) To what volume should 10 mL of 96 per cent H2SO4 be diluted to prepare 2 N solution?
Solution. Mass of 1 litre of H2SO4 solution = Vol. × Density = 1000 × 1.84 = 1840 g. Mass of H2SO4 present in one litre of 96% solution = (96/100) × 1840 = 1766.4 g. Strength = 1766.4 g/L.
(a) Normality = Strength/Eq. mass = 1766.4/49 = 36.05 N.
(b) Let the volume taken be V1 mL. N1V1 = N2V2: 36.05 × V1 = (1/10) × 1000, so V1 = 100/36.05 = 2.77 mL, i.e. 2.77 mL of H2SO4 is diluted to one litre.
(c) Before dilution NBVB = after dilution NAVA: 10 × 36.05 = VA × 2, VA = 180.25 mL, i.e. 10 mL of the given H2SO4 is diluted to 180.25 mL.
Teacher's Note: Convert % w/w and density to normality: 1840 g/L × 0.96 ÷ 49; dilution uses N1V1 = N2V2.
Exam Note: Final volume in (c) is total volume, not water added.
Question 9. 250 mL of x M solution of a solute A are mixed and diluted with 500 mL of y M solution to produce a final concentration of 1.6 M in 2 litre. If x : y = 5 : 4, calculate x and y.
Solution. M1V1 + M2V2 = MR(V1 + V2) gives x × 250 + y × 500 = 1.6 (2000), i.e. x + 2y = 12.8. Since x/y = 5/4, 5/4 + 2 = 12.8/y, so 13/4 = 12.8/y and y = 12.8 × 4/13 = 3.94. Similarly, x = 4.92.
Teacher's Note: Moles add on mixing; final volume here is 2 L after dilution, not 750 mL.
Exam Note: Use final volume 2000 mL given in the question.
Question 10. 2.68 × 10−3 mol of a solution containing an ion An+ required 1.6 × 10−3 mol of MnO4− for oxidation of An+ to AO3− ion in acid medium. What is the value of n?
Solution. An+ is oxidised to AO3−. Change in oxidation number = 5 (in AO3−) − n (in An+) = 5 − n ... (i). 2.68 × 10−3 mol of An+ reacts with 1.6 × 10−3 mol MnO4−, so 1 mol of An+ reacts with 1.6 × 10−3/2.68 × 10−3 = 0.597 mol of MnO4−. Number of equivalents of MnO4− used in oxidation of An+ to AO3− = 0.597 × 5 = 2.985 ≈ 3. Thus, from (i), 5 − n = 3, so n = 2.
Teacher's Note: Equate electrons: each An+ loses (5 − n) electrons; each MnO4− gains 5.
Exam Note: Round 2.985 to 3 and state n = 2.
Illustrations of Objective Questions
Question Objective 1. An element X having equivalent mass E forms a general oxide XmOn, its atomic mass should be: (a) 2En/m (b) 2mEn (c) E/m (d) ME/2n
Solution. Answer: (a). Hint: Amount of X that combines with 8 g of oxygen is E = (m × atomic mass)/(n × 2). Therefore atomic mass = 2En/m.
Teacher's Note: Equivalent mass equals atomic mass times m divided by 2n, since oxygen valency total is 2n.
Exam Note: Derive from E = atomic mass × m/(2n).
Question Objective 2. In the reaction FeS2 + KMnO4 + H+ → Fe3+ + SO2 + Mn2+ + H2O, the equivalent mass of FeS2 would be equal to: (a) molar mass (b) molar mass/10 (c) molar mass/11 (d) molar mass/13
Solution. Answer: (c). Hint: Fe2+ → Fe3+ + e−; S22− → 2S4+ + 10e−. Therefore FeS2 → 2S4+ + Fe3+ + 11e−. Equivalent mass of FeS2 = molar mass/11.
Teacher's Note: Add electrons lost by Fe (1) and both S atoms (10): n-factor 11.
Exam Note: Count electrons from both elements in the compound.
Question Objective 3. The equivalent mass of H3BO3 in its reaction with NaOH to form Na2B4O7 is equal to: (a) molar mass/4 (b) molar mass/3 (c) molar mass/2 (d) molar mass
Solution. Answer: (d). Hint: Boric acid is a monobasic acid. Hence, equivalent mass = molar mass.
Teacher's Note: Boric acid is a Lewis acid, monobasic in water, so n-factor is 1.
Exam Note: Do not count three H atoms as acidic.
Question Objective 4. For the reaction N2(g) + 3H2(g) → 2NH3(g), if molecular masses of NH3 and N2 are M1 and M2, then equivalent masses are E1 and E2, then (E1 − E2) is: (a) (2M1 − M2)/6 (b) M1 − M2 (c) 3M1 − M2 (d) M1 − 3M2
Solution. Answer: (a). Hint: Equivalent mass of N2, i.e. E2 = M2/6; equivalent mass of NH3, i.e. E1 = M1/3. Then E1 − E2 = M1/3 − M2/6 = (2M1 − M2)/6.
Teacher's Note: N2 gains 6 electrons (0 to −3 on two N); NH3 has 3 per molecule.
Exam Note: Use n-factor 6 for N2 and 3 for NH3.
Question Objective 5. X g metal gave Y g of its oxide. Hence, equivalent mass of the metal is: (a) (X/(Y − X)) × 8 (b) ((Y − X)/X) × 8 (c) ((Y + X)/X) × 8 (d) (X/Y) × 8
Solution. Answer: (a). Hint: Mass of oxygen in the oxide = (Y − X). Therefore 8 g oxygen will combine with X/(Y − X) × 8 g metal, so E = (X/(Y − X)) × 8.
Teacher's Note: Oxygen mass is oxide minus metal; scale metal to 8 g oxygen.
Exam Note: Oxygen mass is Y − X, not Y.
Question Objective 6. KMnO4 (m.w. = 158) oxidises oxalic acid in acid medium to CO2 and water as follows: 5C2O42− + 2MnO4− + 16H+ → 10CO2 + 2Mn2+ + 8H2O. What is the equivalent weight of KMnO4? (CET J&K 2006) (a) 158 (b) 31.6 (c) 39.5 (d) 79
Solution. Answer: (b). Hint: MnO4− → Mn2+: oxidation number of Mn changes from +7 to +2, a change of 5. Equivalent mass of KMnO4 = molecular mass/change in oxidation number = 158/5 = 31.6.
Teacher's Note: In acid medium KMnO4 has n-factor 5, so equivalent mass is M/5.
Exam Note: Memorise KMnO4: 31.6 in acid medium.
Question Objective 7. The formula mass of Mohr's salt is 392. The iron present in it is oxidised by KMnO4 in acid medium. The equivalent mass of Mohr's salt is: (a) 392 (b) 31.6 (c) 278 (d) 156
Solution. Answer: (a). Hint: Formula of Mohr's salt: FeSO4·(NH4)2SO4·6H2O. Oxidation of Fe2+ takes place as 5Fe2+ + MnO4− + 8H+ → 5Fe3+ + Mn2+ + 4H2O. Change in oxidation number of Fe = +3 − (+2) = +1. Equivalent mass of Mohr's salt = 392/1 = 392.
Teacher's Note: Mohr's salt has one Fe2+ per formula unit, so n-factor is 1.
Exam Note: Equivalent mass equals formula mass: 392.
Question Objective 8. In a redox reaction, dichromate ion (Cr2O72−) is reduced to Cr3+ ion, the equivalent mass of K2Cr2O7 in this reaction is: (EAMCET 2007) (a) molecular mass/3 (b) molecular mass/6 (c) molecular mass/1 (d) molecular mass/2
Solution. Answer: (b). Hint: Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O. Change in oxidation number = 6. Equivalent mass = molecular mass/6.
Teacher's Note: Two Cr atoms each change by 3, so n-factor is 6 (294/6 = 49).
Exam Note: Count both Cr atoms in the dichromate.
Some Solved Examples (continued)
Question 11. What is the strength in g per litre of a solution of sulphuric acid, 12 mL of which neutralise 15 mL of N/10 sodium hydroxide solution?
Solution. Applying N1V1 = N2V2 (NaOH) (H2SO4): (1/10) × 15 = N2 × 12, so N2 = 15/(10 × 12) = 0.125. Strength = Normality × Eq. mass = 0.125 × 49 = 6.125 g/L.
Teacher's Note: Find normality by N1V1 = N2V2, then multiply by equivalent mass (49).
Exam Note: Use eq. mass 49 for H2SO4, not 98.
Question 12. 4.9 g of H2SO4 is present in 100 mL of the solution. What is the molarity of the solution? Calculate its normality also.
Solution. Strength (g/L) of H2SO4 = (4.9/100) × 1000 = 49. Molarity = Strength/Mol. mass = 49/98 = 0.5 M. Normality = n × Molarity, where n = Mol. mass/Eq. mass = 98/49 = 2. Normality = 2 × 0.5 = 1.0. Hence, the H2SO4 solution is 1 N.
Teacher's Note: Normality = basicity × molarity for acids; H2SO4 has basicity 2.
Exam Note: Convert g per 100 mL to g/L first.
Question 13. 25 mL of N/10 caustic soda solution exactly neutralises 20 mL of an acid solution containing 7.875 g of acid per litre. Calculate the equivalent mass of the acid.
Solution. N1V1 (NaOH) = N2V2 (Acid): (1/10) × 25 = N2 × 20, N2 = 25/(10 × 20) = 0.125. Strength = Normality × Eq. mass, so Eq. mass of the acid = 7.875/0.125 = 63.00.
Teacher's Note: Strength (g/L) divided by normality gives equivalent mass.
Exam Note: Result 63 matches oxalic acid dihydrate.
Question 14. 150 mL of N/10 HCl is required to react completely with 1.0 g of a sample of limestone. Calculate the percentage purity of calcium carbonate.
Solution. 150 mL (N/10) HCl ≡ 150 mL (N/10) CaCO3. CaCO3 + 2HCl → CaCl2 + H2O + CO2. Eq. mass of CaCO3 = (40 + 12 + 48)/2 = 100/2 = 50. Mass of CaCO3 present in 150 mL N/10 solution = N × E × V/1000 = 50 × (1/10) × (150/1000) = 0.75 g. Purity = (0.75/1) × 100 = 75%.
Teacher's Note: Equivalents of HCl equal equivalents of CaCO3; equivalent mass of CaCO3 is 50.
Exam Note: Impurity is assumed not to react with HCl.
Question 15. 0.63 g of dibasic acid was dissolved in water. The volume of the solution was made up to 100 mL. 20 mL of this acid solution required 10 mL of N/5 NaOH solution. What is the equivalent mass and molecular mass of the acid?
Solution. N1V1 (Acid) = N2V2 (NaOH): N1 × 20 = (1/5) × 10, N1 = (1/5) × (10/20) = 1/10. Strength of the acid solution = Eq. mass × Normality = E × (1/10) = E/10 g/L. Mass of acid in 100 mL of the solution = (E/10) × (100/1000) = E/100. Mass of acid in 100 mL of the solution = 0.63 g (given), so E/100 = 0.63, E = 63. Mol. mass = Basicity × Eq. mass = 2 × 63 = 126.
Teacher's Note: Molecular mass equals basicity times equivalent mass; dibasic gives factor 2.
Exam Note: Do not forget the 100 mL volume of the stock solution.
Question 16. 10.875 g of a mixture of NaCl and Na2CO3 was dissolved in water and the volume made up to 250 mL. 20 mL of this solution required 75.5 mL of N/10 H2SO4. Find out the percentage composition of the mixture.
Solution. Only Na2CO3 will react with H2SO4. Applying N1V1 (Na2CO3) = N2V2 (H2SO4): N1 × 20 = 75.5 × (1/10), N1 = 75.5/(20 × 10) = 0.3775. Na2CO3 + H2SO4 → Na2SO4 + H2O + CO2; Eq. mass of Na2CO3 = 106/2 = 53. Mass of Na2CO3 present in 250 mL of 0.3775 N solution = N × E × V/1000 = 0.3775 × 53 × 250/1000 = 5.0018 g. Mass of NaCl = (10.875 − 5.0018) = 5.8732 g. Na2CO3 = (5.0018/10.875) × 100 = 45.99%; NaCl = (5.8732/10.875) × 100 = 54.0%.
Teacher's Note: NaCl does not react; titre gives Na2CO3 only, NaCl by difference.
Exam Note: Scale 20 mL aliquot to the full 250 mL.
Question 17. A quantity of ammonium chloride was heated with 100 mL of 0.8 N NaOH solution till the reaction was complete. The excess of NaOH was neutralised with 12.5 mL of 0.75 N H2SO4. Calculate the quantity of ammonium chloride.
Solution. 12.5 mL of 0.75 N H2SO4 ≡ 12.5 mL of 0.75 N NaOH ≡ 11.72 mL of 0.8 N NaOH. NaOH solution used by NH4Cl = (100 − 11.72) mL of 0.8 N NaOH = 88.28 mL of 0.8 N NaOH ≡ 88.28 mL of 0.8 N NH4Cl. Mass of NH4Cl present in 88.28 mL of 0.8 N solution = N × E × V/1000 = 0.8 × 53.5 × 88.28/1000 = 3.7783 g. [Eq. mass of NH4Cl = 53.5]
Teacher's Note: Back titration: excess NaOH measured; NaOH consumed equals NH4Cl equivalents.
Exam Note: Subtract excess NaOH volume (converted to 0.8 N) first.
Question 18. A sample of Na2CO3·H2O weighing 0.62 g is added to 100 mL of 0.1 N sulphuric acid. Will the resulting solution be acidic, basic or neutral? (At. mass H = 1, C = 12, O = 16, Na = 23, S = 32)
Solution. Mass of Na2CO3·H2O = 0.62 g. No. of g equivalents = Mass/Eq. mass = 0.62/62 = 0.01 [Eq. mass of Na2CO3·H2O = 124/2 = 62]. No. of g equivalents of H2SO4 in 100 mL = (0.1/1000) × 100 = 0.1/10 = 0.01. Both the substances are present in same equivalent; they will completely neutralise each other and hence, the resulting solution will be neutral.
Teacher's Note: Compare equivalents of acid and base; equal equivalents give a neutral solution.
Exam Note: Include water of crystallisation: molar mass 124.
Question 19. A solution containing 4.2 g of KOH and Ca(OH)2 is neutralised by an acid. If it consumes 0.1 g equivalent of the acid, calculate the composition of the sample.
Solution. Let mass of KOH present in mixture = a g and mass of Ca(OH)2 = (4.2 − a) g. Eq. mass of KOH = 56; Eq. mass of Ca(OH)2 = 74/2 = 37. g equivalent of KOH + g equivalent of Ca(OH)2 = g equivalent of the acid: a/56 + (4.2 − a)/37 = 0.1. Or 37a − 56a = 0.1 × 56 × 37 − 4.2 × 56, or 19a = 28, a = 28/19 = 1.47. Mass of KOH in the sample = 1.47 g. Percentage of KOH = 35 and percentage of Ca(OH)2 = 100 − 35 = 65.
Teacher's Note: Total equivalents equal sum of each hydroxide's mass over its equivalent mass.
Exam Note: Ca(OH)2 equivalent mass is 37, not 74.
Question 20. 40 mL of HCl is exactly neutralised by 20 mL of NaOH solution. The resulting neutral solution is evaporated to dryness and the residue is found to have a mass of 0.117 g. Calculate the normality of the HCl and NaOH.
Solution. HCl + NaOH → NaCl + H2O (36.5, 40, 58.5; 1 g eq. each). Mass of NaCl obtained = 0.117 g; Eq. mass of NaCl = 58.5. No. of equivalents of NaCl = 0.117/58.5 = 0.002. Thus, 0.002 g eq. of HCl will react with 0.002 g eq. of NaOH to form 0.002 g eq. NaCl. Normality of HCl = (0.002/40) × 1000 = 0.05 N. Normality of NaOH = (0.002/20) × 1000 = 0.10 N.
Teacher's Note: Equivalents of NaCl formed equal equivalents of each reactant.
Exam Note: Normality = equivalents per litre; convert mL to litres.
Question 21. 1.03 g mixture of sodium carbonate and calcium carbonate require 20 mL N HCl for complete neutralisation. Calculate the percentage of sodium carbonate and calcium carbonate in the given mixture.
Solution. Na2CO3 + 2HCl → 2NaCl + H2O + CO2 (Eq. mass 53); CaCO3 + 2HCl → CaCl2 + H2O + CO2 (Eq. mass 50). Let x g CaCO3 be present in the mixture; mass of Na2CO3 = (1.03 − x) g. No. of g equivalents of CaCO3 = x/50; of Na2CO3 = (1.03 − x)/53. No. of g equivalents in 20 mL N HCl = (1 × 20)/1000 = 1/50. At equivalence point: x/50 + (1.03 − x)/53 = 1/50, or x = 0.50. CaCO3 = 0.50 g, % CaCO3 = (0.50/1.03) × 100 = 48.54. Na2CO3 = 0.53 g, % Na2CO3 = (0.53/1.03) × 100 = 51.46.
Teacher's Note: Set up one equation: equivalents of both carbonates equal equivalents of HCl.
Exam Note: Use equivalent masses 53 and 50 for the two carbonates.
Question 22. 1.325 g of anhydrous sodium carbonate are dissolved in water and the solution made up to 250 mL. On titration 25 mL of this solution neutralise 20 mL of a solution of sulphuric acid. How much water should be added to 450 mL of this acid solution to make it exactly N/12?
Solution. Eq. mass of Na2CO3 = 106/2 = 53. 250 mL of the sodium carbonate solution contains 1.325 g; 1000 mL contains (1.325/250) × 1000 = 5.300 g. Normality of Na2CO3 = Strength/Eq. mass = 5.30/53 = 1/10 N. Applying N1V1 (Na2CO3) = N2V2 (H2SO4): (1/10) × 25 = N2 × 20, N2 = 25/(10 × 20) = 1/8. Applying NBVB (before dilution) = NAVA (after dilution): (1/8) × 450 = (1/12) × VA, VA = 450 × 12/8 = 675 mL. Water to be added for dilution = 675 − 450 = 225 mL.
Teacher's Note: First standardise the acid (N/8), then dilute with N1V1 = N2V2.
Exam Note: Answer is final volume minus 450 mL, not 675 mL.
Question 23. A sample of sodium carbonate contains sodium sulphate also. 1.5 g of the sample is dissolved in water and volume raised to 250 mL. 25 mL of this solution requires 20 mL of N/10 H2SO4 solution for neutralisation. Calculate the percentage of sodium carbonate in the sample.
Solution. Only Na2CO3 will react with H2SO4. N1V1 = N2V2: N1 × 25 = 20 × (1/10), N1 = 20/(25 × 10) = 0.08. Eq. mass of Na2CO3 = 106/2 = 53. Mass of Na2CO3 present in 250 mL of 0.08 N solution = N × E × V/1000 = 0.08 × 53 × 250/1000 = 1.06 g. Percentage of Na2CO3 in the mixture = (1.06/1.50) × 100 = 70.67.
Teacher's Note: Na2SO4 is inert to acid; only carbonate consumes H2SO4.
Exam Note: Scale 25 mL aliquot to 250 mL before the percentage.
Question 24. In a sample of sodium carbonate some sodium sulphate is also mixed. 1.25 g of this sample is dissolved and the volume made up to 250 mL. 25 mL of this solution neutralises 20 mL of N/10 sulphuric acid. Calculate the percentage of sodium carbonate in the sample.
Solution. 25 mL of sample solution neutralises 20 mL N/10 H2SO4. 250 mL of sample solution will neutralise 200 mL N/10 H2SO4; 200 mL N/10 H2SO4 ≡ 200 mL N/10 Na2CO3 solution. Amount of Na2CO3 present = E × N × V/1000 = 53 × 200/(10 × 1000) = 1.06 g. % of Na2CO3 in the sample = (1.06/1.25) × 100 = 84.8.
Teacher's Note: Same method as Example 23: scale the aliquot titre, then compute mass of carbonate.
Exam Note: Report percentage of the original 1.25 g sample.
Question 25. 1.725 g of a metal carbonate is mixed with 300 mL of N/10 HCl. 10 mL of N/2 sodium hydroxide were required to neutralise excess of the acid. Calculate the equivalent mass of the metal carbonate.
Solution. 10 mL of N/2 NaOH solution = 10 mL of N/2 HCl solution ≡ 50 mL of N/10 HCl solution. Volume of N/10 HCl used for neutralisation = 300 − 50 = 250 mL. 250 mL of N/10 HCl ≡ 250 mL of N/10 metal carbonate solution. Let the equivalent mass of metal carbonate be E. Mass of metal carbonate present in solution = N × E × V/1000 = 1.725, so 1 × E × 250/(10 × 1000) = 1.725, E/40 = 1.725, E = 40 × 1.725 = 69.
Teacher's Note: Back titration: acid left over is found with NaOH; subtract to get acid used.
Exam Note: Convert N/2 NaOH volume to N/10 equivalent (×5).
Question 26. 1.575 g of oxalic acid (COOH)2·xH2O are dissolved in water and the volume made up to 250 mL. On titration 16.68 mL of this solution requires 25 mL of N/15 NaOH solution for complete neutralisation. Calculate x.
Solution. 25 mL of N/15 NaOH solution ≡ 25 mL of N/15 oxalic acid solution. Mass of oxalic acid present in 25 mL of N/15 oxalic acid solution = N × E × V/1000 = 1 × (90 + 18x) × 25/(15 × 2 × 1000) = (90 + 18x)/1200 g. Actually (90 + 18x)/1200 g oxalic acid is present in 16.68 mL solution. 250 mL of the solution contains oxalic acid = (90 + 18x) × 250/(1200 × 16.68) = 1.575 (given), or 90 + 18x = 1.575 × 1200 × 16.68/250 = 126, or 18x = 126 − 90 = 36, x = 2.
Teacher's Note: Equivalent mass of hydrated oxalic acid is (90 + 18x)/2; solve for x from the mass data.
Exam Note: Result 126 gives x = 2: (COOH)2·2H2O.
Question 27. 25 mL of a mixture of NaOH and Na2CO3 when titrated with N/10 HCl using phenolphthalein indicator required 25 mL HCl. The same volume of the mixture when titrated with N/10 HCl using methyl orange indicator required 30 mL of HCl. Calculate the amount of Na2CO3 and NaOH in one litre of this mixture.
Solution. When phenolphthalein is the indicator, whole of NaOH has been neutralised and carbonate converted into bicarbonate: NaOH + HCl → NaCl + H2O; Na2CO3 + HCl → NaHCO3 + NaCl. So 25 mL N/10 HCl ≡ NaOH + ½Na2CO3 present in 25 mL of mixture.
When methyl orange is the indicator, whole of NaOH has been neutralised and carbonate converted into carbonic acid: Na2CO3 + 2HCl → 2NaCl + H2CO3. So 30 mL N/10 HCl ≡ NaOH + Na2CO3 present in 25 mL of mixture. Hence (30 − 25) mL N/10 HCl ≡ ½Na2CO3 present in 25 mL of mixture, so 10 mL N/10 HCl ≡ Na2CO3 present in 25 mL of mixture ≡ 10 mL N/10 Na2CO3 solution. Amount of Na2CO3 = 53 × 10/(10 × 1000) = 0.053 g. This amount is present in 25 mL of mixture; in one litre of mixture = (0.053/25) × 1000 = 2.12 g.
(30 − 10) mL N/10 HCl ≡ NaOH present in 25 mL mixture ≡ 20 mL N/10 NaOH. Amount of NaOH in 25 mL of mixture = 40 × 20/(10 × 1000) = 0.08 g. The amount present in one litre of mixture = (0.08/25) × 1000 = 3.20 g.
Teacher's Note: Phenolphthalein sees NaOH plus half the carbonate; methyl orange sees all of both.
Exam Note: Methyl orange minus phenolphthalein volume equals half-carbonate titre.
Question 28. 25 mL of a mixture of NaOH + Na2CO3, when titrated with N/10 HCl using phenolphthalein indicator required 25 mL HCl to decolourise the pink. At this stage methyl orange was added and addition of acid was continued. The second end point was reached after further addition of 5 mL of the acid. Calculate the amount of Na2CO3 and NaOH in one litre of the solution.
Solution. Between first and second end points, NaHCO3 + HCl → NaCl + H2CO3. So 5 mL N/10 HCl ≡ ½Na2CO3 present in 25 mL of a mixture, or 10 mL N/10 HCl ≡ Na2CO3 present in 25 mL of a mixture ≡ 10 mL N/10 Na2CO3 = 0.053 g Na2CO3. Amount of Na2CO3 in one litre of mixture = (0.053/25) × 1000 = 2.12 g.
(25 − 5) mL N/10 HCl ≡ NaOH present in 25 mL of mixture ≡ 20 mL N/10 NaOH ≡ 0.08 g NaOH. Amount of NaOH in one litre of mixture = (0.08/25) × 1000 = 3.2 g.
Corrected: the book prints the intermediate step as 25 mL N/10 NaOH; it should be 20 mL, which is what gives the printed 0.08 g and 3.2 g/L.
Teacher's Note: Second-stage titre gives half the carbonate; the rest of the first-stage titre belongs to NaOH.
Exam Note: Subtract 5 mL from 25 mL, not from 30 mL.
Question 29. A solution contains Na2CO3 and NaHCO3. 10 mL of the solution required 2.5 mL of 0.1 M H2SO4 for neutralisation using phenolphthalein as indicator. Methyl orange is then added when a further 2.5 mL of 0.2 M H2SO4 was required. Calculate the amount of Na2CO3 and NaHCO3 in one litre of the solution.
Solution. 2.5 mL of 0.1 M H2SO4 = 2.5 mL of 0.2 N H2SO4 ≡ ½Na2CO3 present in 10 mL of mixture. So 5 mL of 0.2 N H2SO4 ≡ Na2CO3 present in 10 mL of mixture ≡ 5 mL of 0.2 N Na2CO3 = 0.2 × 53 × 5/1000 = 0.053 g. Amount of Na2CO3 = (0.053/10) × 1000 = 5.3 g/L of mixture.
Between first and second end points, 2.5 mL of 0.2 M H2SO4 = 2.5 mL of 0.4 N H2SO4 = 5 mL of 0.2 N H2SO4 ≡ ½Na2CO3 + NaHCO3 present in 10 mL of mixture. (5 − 2.5) mL 0.2 N H2SO4 ≡ NaHCO3 present in 10 mL of mixture ≡ 2.5 mL 0.2 N NaHCO3 = 0.2 × 84 × 2.5/1000 = 0.042 g. Amount of NaHCO3 = (0.042/10) × 1000 = 4.20 g/L of mixture.
Teacher's Note: Phenolphthalein stage gives half the carbonate; second stage includes that half plus bicarbonate.
Exam Note: Convert molarity to normality (×2) before comparing volumes.
Question 30. Calculate the normality of a solution obtained by mixing 100 mL N/10 H2SO4, 50 mL N/2 HNO3 and 25 mL N/5 HCl solutions.
Solution. Let the final normality be N. Total volume = 100 + 50 + 25 = 175 mL. So 175 × N = N1V1 + N2V2 + N3V3 = (100 × 1/10) + (50 × 1/2) + (25 × 1/5) = 10 + 25 + 5 = 40. N = 40/175 = 0.2286. Hence, normality of solution = 0.2286 N.
Teacher's Note: Acids mix without reaction: total milliequivalents divided by total volume.
Exam Note: Divide by total volume 175 mL.
Question 31. 0.5 g of fuming H2SO4 (oleum) is diluted with water. This solution is completely neutralised by 26.7 mL of 0.4 N NaOH. Find the percentage of free SO3 in the sample solution.
Solution. Oleum consists of SO3 and H2SO4. Let the mass of SO3 in the given sample of oleum be x g. Mass of H2SO4 = (0.5 − x) g. Eq. mass of SO3 = 80/2 = 40, so g equivalents of SO3 = x/40 [2NaOH + SO3 → Na2SO4 + H2O; 2NaOH + H2SO4 → Na2SO4 + 2H2O]. Eq. mass of H2SO4 = 98/2 = 49, so g equivalents of H2SO4 = (0.5 − x)/49. Total no. of g equivalents = x/40 + (0.5 − x)/49. 26.7 mL of 0.4 N NaOH contains (0.4/1000) × 26.7 equivalents of NaOH. At equivalence point: (0.4 × 26.7)/1000 = x/40 + (0.5 − x)/49 = (49x + 40 × 0.5 − 40x)/(40 × 49). So x = 0.9328/9 = 0.1036. Hence, % of free SO3 = (0.1036/0.5) × 100 = 20.72.
Teacher's Note: SO3 forms H2SO4 in water; both have n-factor 2 with different masses.
Exam Note: Use equivalent masses 40 and 49 in one balance.
Question 32. 0.789 g of crystalline barium hydroxide is dissolved in water. For the neutralisation of this solution, 20 mL of N/4 HNO3 is required. How many molecules of water are present in one g mole of this base? (Ba = 137.4, O = 16, N = 14, H = 1)
Solution. Let the molecular formula be Ba(OH)2·xH2O. Mol. mass = 137.4 + (2 × 16) + 2 × 1 + 18x = 171.4 + 18x. Eq. mass = (171.4 + 18x)/2. 20 mL N/4 HNO3 ≡ 20 mL N/4 Ba(OH)2·xH2O. Amount of Ba(OH)2·xH2O = ((171.4 + 18x)/2) × (1/4) × (20/1000) = (171.4 + 18x)/400 g. This amount = 0.789 g, hence (171.4 + 18x)/400 = 0.789, or 171.4 + 18x = 0.789 × 400, x = 144.2/18 = 8.01 ≈ 8. Thus, 8 g moles of water molecules are present in one g mole of the base.
Teacher's Note: Write the hydrate formula with x, express equivalent mass, and solve for x.
Exam Note: Question asks moles of water per mole of base: 8.
Question 33. A piece of aluminium weighing 2.7 g is heated with 75 mL of H2SO4 (sp. gr. 1.18, containing 24.7% H2SO4 by mass). After the metal is carefully dissolved, the solution is diluted to 400 mL. Calculate the molarity of the free H2SO4 in the resulting solution.
Solution. Mass of H2SO4 = (24.7/100) × 75 × 1.18 = 21.8595 g. Reaction: 2Al + 3H2SO4 → Al2(SO4)3 + 3H2 (2 × 27; 3 × 98). H2SO4 required for dissolving 2.7 g Al = (3 × 98)/(2 × 27) × 2.7 = 14.7 g. H2SO4 left unreacted = (21.895 − 14.7) g = 7.1595 g. 7.1595 g H2SO4 is present in 400 mL. Amount of H2SO4 present in one litre = (7.1595/400) × 1000 = 17.898 g. No. of g moles of H2SO4 = 17.898/98 = 0.1826. Hence, molarity of H2SO4 = 0.1826 M.
Teacher's Note: Subtract acid consumed by aluminium (3 mol per 2 mol Al) from acid supplied.
Exam Note: Use density and % to get mass of acid first.
Question 34. 0.50 g of a mixture of K2CO3 and Li2CO3 requires 30 mL of a 0.25 N HCl solution for neutralisation. What is the percentage composition of the mixture?
Solution. K2CO3 + 2HCl → 2KCl + H2O + CO2 (Eq. mass 138/2 = 69); Li2CO3 + 2HCl → 2LiCl + H2O + CO2 (Eq. mass 74/2 = 37). Let x g of K2CO3 be present in the mixture; mass of Li2CO3 = (0.50 − x). No. of g equivalents of K2CO3 = x/69; of Li2CO3 = (0.50 − x)/37. No. of g equivalents in 30 mL of 0.25 N HCl = (0.25 × 30)/1000 = 3/400. At equivalence point: x/69 + (0.50 − x)/37 = 3/400, so x = 0.48. K2CO3 = 0.48 g, or 96%; Li2CO3 = 0.02 g, or 4%.
Teacher's Note: Two-component mixture: one equation from equivalents with x and (0.50 − x).
Exam Note: Check: 96% K2CO3, 4% Li2CO3 sums to 100.
Question 35. 5 mL of 8 N nitric acid, 4.8 mL of 5 N hydrochloric acid and a certain volume of 17 M sulphuric acid are mixed together and made up to 2 litre. Thirty mL of this acid mixture exactly neutralise 42.9 mL of sodium carbonate solution containing one gram of Na2CO3·10H2O in 100 mL of water. Calculate the amount in grams of the sulphate ion in solution.
Solution. Molecular mass of Na2CO3·10H2O = 286; equivalent mass = 286/2 = 143. 100 mL solution of sodium carbonate contains 1 g; 1000 mL contains 10 g. Normality of the solution = 10/143. Normality of acid solution × its volume = normality of sodium carbonate solution × its volume, so normality of the acid solution = (10 × 42.9)/(143 × 30) = 0.1. Let V mL be the volume of H2SO4 taken (17 M = 34 N): 8 × 5 + 4.8 × 5 + 34 × V = 0.1 × 2000, so V = 4 mL. Amount of SO42− = Normality × Eq. mass × Volume/1000 = 34 × 48 × 4/1000 = 6.528 g.
Teacher's Note: Find mixture normality by neutralising carbonate; then solve for H2SO4 volume (17 M = 34 N).
Exam Note: Convert 17 M H2SO4 to 34 N; sulphate equivalent mass is 48.
Question 36. 2.26 g of an ammonium salt were treated with 100 mL of normal NaOH solution and boiled till no more of ammonia gas was given off. The excess of NaOH solution left over required 60 mL normal sulphuric acid. Calculate the percentage of ammonia in the salt.
Solution. 60 mL normal H2SO4 ≡ 60 mL normal NaOH. Thus, (100 − 60) mL normal NaOH were consumed by ammonium salt. So, 40 mL normal NaOH ≡ 40 mL normal NH3. Amount of NH3 in 40 mL normal NH3 = (Eq. mass of NH3 × 40)/1000 = 17 × 40/1000 = 0.68 g. So, % of ammonia in the ammonium salt = (0.68/2.26) × 100 = 30.09.
Teacher's Note: Back titration: NaOH consumed by the salt equals NH3 equivalents liberated.
Exam Note: Subtract excess NaOH (60 mL) from 100 mL first.
Question 37. 10 mL of a solution containing sulphuric acid and hydrochloric acid required 16 mL of N/8 caustic soda solution for neutralisation. On adding excess of barium chloride to 20 mL of the same solution of the mixture of the two acids it gives 0.3501 g barium sulphate. What is the amount of hydrochloric acid per litre in the mixture of acids? (Ba = 137.4, S = 32, O = 16, Cl = 35.5)
Solution. Mol. mass of BaSO4 = 137.4 + 32 + 64 = 233.4. H2SO4 + BaCl2 → BaSO4 + 2HCl. 233.4 g of BaSO4 is obtained from 98 g of H2SO4; 0.3501 g of BaSO4 is obtained from (98/233.4) × 0.3501 = 0.147 g of H2SO4. 20 mL of acid mixture contains 0.147 g H2SO4, so 10 mL of acid mixture contains 0.0735 g H2SO4. Amount of NaOH in 16 mL N/8 NaOH solution = (E × N × V)/1000 = 40 × 16/(8 × 1000) = 0.08 g. H2SO4 + 2NaOH → Na2SO4 + 2H2O (98 g; 2 × 40 = 80 g). Thus, 98 g of H2SO4 require 80 g of NaOH, so 0.0735 g of H2SO4 will require (80/98) × 0.0735 = 0.06 g of NaOH. Let the amount of HCl in 10 mL acid mixture be x g. HCl + NaOH → NaCl + H2O (36.5 g; 40 g). x g HCl will require (40/36.5)x = 1.0958x g of NaOH. 1.0958x + 0.06 = 0.08, x = (0.08 − 0.06)/1.0958 = 0.01825 g. Amount of HCl present in one litre of the acid solution = (0.01825 × 1000)/10 = 1.825 g.
Teacher's Note: Gravimetric BaSO4 gives H2SO4; the NaOH titre then gives HCl by difference.
Exam Note: Use the same 10 mL basis for both measurements.
Question 38. A small amount of CaCO3 completely neutralises 525 mL of 0.1 N HCl and no acid is left in the end. After converting all calcium chloride to CaSO4, how much plaster of Paris can be obtained? (Dhanbad 1991)
Solution. 525 mL of 0.1 N HCl ≡ 525 mL of 0.1 N CaCl2 ≡ 525 mL of 0.1 N plaster of Paris. Molecular mass of plaster of Paris = CaSO4·½H2O = 145; equivalent mass of plaster of Paris = 145/2 = 72.5. Mass of plaster of Paris in 525 mL of 0.1 N solution = N × E × V/1000 = 0.1 × 72.5 × 525/1000 = 3.806 g.
Teacher's Note: Equivalents are conserved through HCl, CaCl2 and CaSO4·½H2O; n-factor of Ca is 2.
Exam Note: Plaster of Paris is CaSO4·½H2O, mass 145.
Question 39. 25 mL of 0.107 M H3PO4 was titrated with 0.115 M solution of NaOH to the endpoint identified by indicator bromocresol green. This required 23.1 mL. The titration was repeated using phenolphthalein as indicator. This time 25 mL of the 0.107 M H3PO4 required 46.2 mL of the 0.115 M NaOH. What is the coefficient 'n' in the following reaction? H3PO4 + nOH− → [H3−nPO4]n− + nH2O
Solution. Number of milliequivalents of H3PO4 = 25 × 0.107 × n = 2.675 × n. In first titration: number of milliequivalents of OH− used = 23.1 × 0.115 × 1 = 2.66 (acidity of NaOH = 1). In second titration: number of milliequivalents of OH− used = 46.2 × 0.115 × 1 = 5.313. In first titration: 2.675 × n = 2.66, i.e., n = 1. In second titration: 2.675 × n = 5.313, n = 2.
Teacher's Note: Milliequivalents of acid (M × V × n) equal those of base; solve for n at each end point.
Exam Note: Bromocresol green gives n = 1; phenolphthalein gives n = 2.
Question 40. 11.2 g carbon reacts completely with 19.63 litre O2 at NTP. The cooled gases were passed through 2 litre of 2.5 N NaOH solution. Calculate concentration of remaining NaOH and Na2CO3 in solution. (CO does not react with NaOH under these conditions.)
Solution. Let x moles of carbon be converted into CO and y moles of carbon be converted into CO2. C + ½O2 → CO (x, x/2); C + O2 → CO2 (y, y). Total volume of oxygen used = (x/2) × 22.4 + y × 22.4 = 19.63, so 11.2x + 22.4y = 19.63 ... (i). x + y = 11.2/12, i.e. 12x + 12y = 11.2 ... (ii). Solving (i) and (ii): x = 0.11, y = 0.82. Number of moles of CO2 formed = 0.82. Number of milliequivalents of NaOH solution through which CO2 is passed = N × V = 2.5 × 2000 = 5000. Number of milliequivalents of CO2 passed = 0.82 × 2 × 1000 = 1640. 2NaOH + CO2 → Na2CO3 + H2O. Number of milliequivalents of Na2CO3 = 1640, so N(Na2CO3) = 1640/2000 = 0.82. Number of milliequivalents of remaining NaOH = 5000 − 1640 = 3360. Normality of remaining NaOH = 3360/2000 = 1.68.
Teacher's Note: Two simultaneous equations (carbon balance, oxygen volume) split carbon between CO and CO2.
Exam Note: Only CO2 reacts; 1 mol CO2 consumes 2 equivalents NaOH.
Illustrations of Objective Questions (continued)
Question Objective 9. How many grams of NaHCO3 are required to neutralise 1 mL of 0.0902 N vinegar? (a) 8.4 × 10−3 g (b) 1.5 × 10−3 g (c) 0.758 × 10−3 g (d) 1.07 × 10−3 g
Solution. Printed answer: (c). Hint: Number of equivalents of NaHCO3 = number of equivalents of acid = NV/1000 = 0.0902 × 1/1000. Mass of NaHCO3 = 0.0902 × 1 × 84/1000.
Corrected: 0.0902 × 84/1000 = 7.58 × 10−3 g, not 0.758 × 10−3 g as printed. None of the four printed options equals this value; option (c) has the same digits (758) and is evidently the intended choice.
Teacher's Note: Equivalents of base equal equivalents of acid: 9.02 × 10−5 eq × 84 g/eq.
Exam Note: Watch the power of ten when options share digits.
Question Objective 10. 0.7 g of Na2CO3·xH2O was dissolved in water and the volume made up to 100 mL. 20 mL of it required 19.8 mL of N/10 HCl for complete neutralisation. The value of x is: (a) 7 (b) 3 (c) 2 (d) 5
Solution. Answer: (c). Hint: Number of milliequivalents of Na2CO3·xH2O in 20 mL = 19.8 × 1/10 = 1.98. Number of milliequivalents in 100 mL = 1.98 × 5 = 9.9. (Mass/Equivalent mass) × 1000 = 9.9, so (0.7/(M/2)) × 1000 = 9.9, M = 141.40 (molar mass of Na2CO3·xH2O). 106 + 18x = 141.40, x = 2.
Teacher's Note: Scale the 20 mL aliquot to 100 mL, then find molar mass and subtract 106.
Exam Note: Equivalent mass is M/2 for the carbonate.
Question Objective 11. Calculate the equivalent mass of Na2CO3 when it is titrated against HCl in presence of phenolphthalein. (a) 106 (b) 53 (c) 26.5 (d) 212
Solution. Answer: (a). Hint: The reaction involved is Na2CO3 + HCl → NaCl + NaHCO3. Equivalent mass of Na2CO3 = 106/1 = 106.
Teacher's Note: With phenolphthalein only one H+ is added (to bicarbonate), so n-factor is 1.
Exam Note: Phenolphthalein: M/1; methyl orange: M/2.
Question Objective 12. 1 mol H2SO4 will exactly neutralise: (a) 2 mol of ammonia (b) 1 mol of Ba(OH)2 (c) 0.5 mol of Ba(OH)2 (d) 2 mol of KOH
Solution. Answer: (a), (b), (d). Hint: 2NH3 + H2SO4 → (NH4)2SO4; Ba(OH)2 + H2SO4 → BaSO4 + 2H2O; 2KOH + H2SO4 → K2SO4 + 2H2O.
Teacher's Note: Dibasic acid neutralises 2 equivalents of base: 2 mol NH3, 1 mol Ba(OH)2, 2 mol KOH.
Exam Note: Compare equivalents, not moles.
Question Objective 13. Which of the following gives equivalent mass of Na2CO3 when titrated against HCl in the presence of methyl orange? (a) 5.3 (b) 53 (c) 10.6 (d) 106
Solution. Answer: (b). Hint: Na2CO3 + 2HCl → 2NaCl + H2O + CO2 (methyl orange). Equivalent mass = molecular mass/2 = 106/2 = 53.
Teacher's Note: Methyl orange turns at complete neutralisation, so two H+ react per carbonate.
Exam Note: Contrast with phenolphthalein (n-factor 1).
Some Solved Examples (continued)
Question 41. 0.5 g of an oxalate was dissolved in water and the solution made up to 100 mL. On titration 10 mL of this solution required 15 mL of N/20 KMnO4. Calculate the percentage of oxalate in the sample.
Solution. 15 mL N/20 KMnO4 = 10 × normality of oxalate solution. Normality of oxalate solution = (15/10) × (1/20) = 3/40. Strength of oxalate solution = Normality × Eq. mass of oxalate = (3/40) × 44 = 3.3 g/L [Eq. mass of C2O42− = 88/2 = 44]. Amount of oxalate in 100 mL solution = (3.3/1000) × 100 = 0.33 g. % of oxalate = (0.33/0.5) × 100 = 66.0.
Teacher's Note: Oxalate ion has n-factor 2 with KMnO4, so equivalent mass is 44.
Exam Note: Scale from 10 mL aliquot to the 100 mL flask.
Question 42. How many mL of a 0.05 M KMnO4 solution are required to oxidise 2.0 g of FeSO4 in a dilute solution (acidic)?
Solution. 10FeSO4 + 2KMnO4 + 8H2SO4 → K2SO4 + 2MnSO4 + 5Fe2(SO4)3 + 8H2O. 10 × 151.8 g of FeSO4 require KMnO4 = 2 × 158 g, so 2 g of FeSO4 will require KMnO4 = (2 × 158 × 2)/(10 × 151.8) g. Suppose V mL of KMnO4 solution (0.05 M) is required. Amount of KMnO4 in this solution = (158 × 0.05/1000) × V. Thus, (158 × 0.05 × V)/1000 = (2 × 158 × 2)/(10 × 151.8), V = 52.7 mL.
Teacher's Note: Use the mole ratio 5 FeSO4 : 1 KMnO4 from the balanced equation.
Exam Note: Balance the equation first; ratio is 5:1.
Question 43. 5.5 g of a mixture of FeSO4·7H2O and Fe2(SO4)3·9H2O required 5.4 mL of 0.1 N KMnO4 solution for complete oxidation. Calculate the gram mole of hydrated ferric sulphate in the mixture. (At. mass H = 1, O = 16, S = 32, Fe = 56)
Solution. Only FeSO4·7H2O will be oxidised by KMnO4. Mol. mass of FeSO4·7H2O = 278. As the conversion involves one electron, Fe2+ → Fe3+ + e−, the eq. mass of FeSO4·7H2O = 278/1 = 278. 5.4 mL of 0.1 N KMnO4 ≡ 5.4 mL of 0.1 N FeSO4·7H2O solution. Amount of FeSO4·7H2O = (0.1 × 278/1000) × 5.4 = 0.15 g. Amount of Fe2(SO4)3·9H2O = (5.5 − 0.15) = 5.35 g. Mol. mass of Fe2(SO4)3·9H2O = 562. No. of g moles = 5.35/562 = 0.00952 = 9.52 × 10−3.
Teacher's Note: Ferric salt is already oxidised; KMnO4 titrates only the ferrous salt, ferric by difference.
Exam Note: Ferric sulphate is found by subtracting from 5.5 g.
Question 44. 0.5 g mixture of K2Cr2O7 and KMnO4 was treated with excess of KI in acidic medium. Iodine liberated required 100 cm3 of 0.15 N sodium thiosulphate solution for titration. Find the per cent amount of each in the mixture. (IIT 1995)
Solution. Let 'a' g of K2Cr2O7 be present in the mixture. Mass of KMnO4 = (0.5 − a) g. Eq. mass of K2Cr2O7 = 294/6 = 49.0; Eq. mass of KMnO4 = 158/5 = 31.6. No. of equivalents of K2Cr2O7 = a/49.0; of KMnO4 = (0.5 − a)/31.6. No. of equivalents of Na2S2O3 in 100 cm3 of 0.15 N solution = 100 × 0.15/1000 = 0.015. Equivalents of K2Cr2O7 + equivalents of KMnO4 ≡ equivalents of iodine ≡ equivalents of Na2S2O3: a/49.0 + (0.5 − a)/31.6 = 0.015, 17.4a = 1.274, a = 0.0732. % of K2Cr2O7 = (0.0732 × 100)/0.5 = 14.64; % of KMnO4 = 85.36.
Teacher's Note: Both oxidants liberate iodine; total equivalents equal thiosulphate equivalents.
Exam Note: Use equivalent masses 49 and 31.6 in one equation.
Question 45. Calculate the percentage of available chlorine in a given sample of bleaching powder from the following data: 3.55 g of bleaching powder when treated with acetic acid and excess of KI liberated iodine which required 60 mL of 0.5 N sodium thiosulphate solution.
Solution. 60 mL 0.5 N Na2S2O3 ≡ 60 mL 0.5 N I2 ≡ 60 mL 0.5 N Cl2. Amount of chlorine = (35.5 × 0.5/1000) × 60 = 1.065 g. % available chlorine = (1.065/3.55) × 100 = 30.0.
Teacher's Note: Thiosulphate equivalents equal iodine equivalents equal chlorine equivalents (E = 35.5).
Exam Note: Available chlorine is expressed as mass of Cl2.
Question 46. 0.261 g of a sample of pyrolusite was heated with excess of HCl and the chlorine evolved was passed in a solution of KI. The liberated iodine required 90 mL of N/30 Na2S2O3. Calculate the percentage of MnO2 in the sample.
Solution. MnO2 + 4HCl → MnCl2 + 2H2O + Cl2; 2KI + Cl2 → 2KCl + I2; 2Na2S2O3 + I2 → Na2S4O6 + 2NaI. 90 mL N/30 Na2S2O3 ≡ 90 mL N/30 I2 ≡ 90 mL N/30 Cl2 ≡ 90 mL N/30 MnO2. Eq. mass of MnO2 = Mol. mass/2 = 87/2 [since change in O.N. is from 4 to 2]. Amount of MnO2 = (87/(2 × 30)) × (90/1000) = 0.1305 g. % of MnO2 = (0.1305/0.261) × 100 = 50.
Teacher's Note: Chain of equivalents: thiosulphate = I2 = Cl2 = MnO2; MnO2 n-factor is 2.
Exam Note: Write the equivalence chain explicitly.
Question 47. (i) What is the mass of sodium bromate and molarity of the solution necessary to prepare 85.4 mL of 0.672 N solution when the half reaction is, BrO3− + 6H+ + 6e− → Br− + 3H2O? (ii) What would be the mass as well as molarity if the half cell reaction is, 2BrO3− + 12H+ + 10e− → Br2 + 6H2O?
Solution. (i) Molecular mass of NaBrO3 = 23 + 80 + (3 × 16) = 151. Each bromate ion takes up 6 electrons; therefore, Eq. mass of NaBrO3 = 151/6. Amount of NaBrO3 in 85.5 mL 0.672 N solution = (0.672/1000) × (151/6) × 85.5 = 1.446 g. Molarity = Normality/n = 0.672/6 = 0.112 M.
(ii) Each bromate ion takes up 5 electrons; therefore, Eq. mass of NaBrO3 = 151/5. Amount of NaBrO3 in 85.5 mL 0.672 N solution = (151/5) × (0.672/1000) × 85.5 = 1.7352 g. Molarity = Normality/n = 0.672/5 = 0.1344 M.
Note: the book's statement says 85.4 mL but its working uses 85.5 mL. With 85.4 mL the masses would be 1.444 g and 1.733 g; molarities are unchanged.
Teacher's Note: Equivalent mass depends on electrons taken: 6 for Br−, 5 for Br2; molarity = N/n.
Exam Note: State the n-factor from the half-reaction.
Question 48. 50 mL of an aqueous solution of H2O2 was treated with an excess of KI solution and dilute H2SO4. The liberated iodine required 20 mL 0.1 N Na2S2O3 solution for complete interaction. Calculate the concentration of H2O2 in g/L.
Solution. H2O2 + 2KI + H2SO4 → K2SO4 + 2H2O + I2; 2Na2S2O3 + I2 → Na2S4O6 + 2NaI. Eq. mass of H2O2 = 34/2 = 17. 20 mL 0.1 N Na2S2O3 = 20 mL 0.1 N I2 ≡ 20 mL 0.1 N H2O2 solution. Amount of H2O2 in 50 mL aq. solution = (0.1 × 17/1000) × 20 = 0.034 g. Concentration in g/L = (0.034/50) × 1000 = 0.68.
Teacher's Note: Iodometry: thiosulphate equivalents equal H2O2 equivalents; E = 17.
Exam Note: Scale 50 mL to 1 L for g/L.
Question 49. 0.124 g of iron wire was dissolved in dilute H2SO4 in oxygen free atmosphere and the resultant solution was titrated against 0.09672 N solution of KMnO4. The titre value was 22.90 mL. Calculate the percentage purity of iron wire.
Solution. 22.90 mL 0.09672 N KMnO4 ≡ 22.90 mL 0.09672 N FeSO4. Amount of FeSO4 in the solution = (0.09672 × 152 × 22.90)/1000 = 0.3366 g. Amount of iron in 0.3366 g of FeSO4 = (56/152) × 0.3366 = 0.124 g. Thus, percentage = (0.124/0.124) × 100 = 100. The iron wire is 100% pure.
Teacher's Note: Oxygen-free atmosphere prevents Fe2+ oxidation; E(FeSO4) = 152.
Exam Note: Convert FeSO4 mass back to iron mass (56/152).
Question 50. A sample of hydrazine sulphate (N2H6SO4) was dissolved in 100 mL of water. 10 mL of this solution was reacted with excess of FeCl3 solution and warmed to complete the reaction. Ferrous ion formed was estimated and it required 20 mL of M/50 KMnO4. Estimate the amount of hydrazine sulphate in one litre of solution. Reactions: 4Fe3+ + N2H4 → N2 + 4Fe2+ + 4H+; MnO4− + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O
Solution. 20 mL M/50 KMnO4 = 20 mL N/10 KMnO4 [equivalent mass of KMnO4 = molecular mass/5] ≡ 20 mL N/10 ferrous ion ≡ 20 mL N/10 FeCl3 ≡ 20 mL N/10 N2H6SO4. Eq. mass N2H6SO4 = Mol. mass/4 = 130/4 = 32.5 [since change in O.N. (N2H4 → N2) per molecule = 4]. Amount of hydrazine sulphate in 10 mL of solution = (1/10) × (32.5/1000) × 20 = 0.065 g. Amount of hydrazine sulphate in one litre of solution = (0.065/10) × 1000 = 6.50 g.
Teacher's Note: Chain of equivalents: KMnO4 = Fe2+ = hydrazine sulphate with n-factor 4.
Exam Note: Convert 10 mL aliquot to 1 L for the final answer.
Question 51. 0.1 M KMnO4 is used for the following titration. What volume of the solution in mL will be required to react with 0.158 g of Na2S2O3? S2O32− + MnO4− + H2O → MnO2(s) + SO42− + OH− (not balanced) (MLNR 1992)
Solution. S2O32− → 2SO42−. Change in oxidation number of sulphur per molecule of S2O32− = 2 × (6 − 2) = 8. Change in oxidation number of Mn per molecule of MnO4− = 7 − 4 = 3. No. of moles of 0.158 g of Na2S2O3 = 0.158/158 = 1 × 10−3. No. of equivalents = 8 × 10−3. Normality of 0.1 M KMnO4 solution = 0.1 × 3 = 0.3. Let V mL of volume of KMnO4 be required; then (V/1000) × 0.3 = 8 × 10−3, V = (8/0.3) × 10−3 × 103 = 26.7 mL.
Teacher's Note: Here thiosulphate goes to sulphate (n = 8) and KMnO4 to MnO2 (n = 3).
Exam Note: Use n = 8 for thiosulphate here, not 1.
Question 52. 25 mL of H2O2 solution were added to excess of acidified solution of KI. The iodine so liberated required 20 mL of 0.1 N Na2S2O3 for titration. Calculate the strength of H2O2 in terms of normality, percentage and volume. (MLNR 1990)
Solution. 20 mL of 0.1 N Na2S2O3 ≡ 20 mL of 0.1 N I2 solution ≡ 20 mL of 0.1 N H2O2 solution ≡ 25 mL of 0.08 N H2O2 solution. Mass of H2O2 in 100 mL solution = (0.08 × 17 × 100)/1000 = 0.136 g, so % = 0.136. 68 g H2O2 evolve oxygen at NTP = 22400 mL; 0.00136 g H2O2 evolve oxygen at NTP = (22400/68) × 0.00136 = 0.448. The solution is of 0.448 volume.
Teacher's Note: Normality 0.08 N; volume strength is mL O2 per mL solution (2H2O2 gives 22400 mL per 68 g).
Exam Note: Normality, percentage and volume strength are three separate answers.
Question 53. 0.804 g sample of iron ore was dissolved in acid. Iron was reduced to +2 state and it required 47.2 mL of 0.112 N KMnO4 solution for titration. Calculate the percentage of iron and Fe3O4 in the ore.
Solution. The titration involves the conversion of ferrous into ferric: 5Fe2+ + MnO4− + 8H+ → 5Fe3+ + Mn2+ + 4H2O. 47.2 mL of 0.112 N KMnO4 ≡ 47.2 mL of 0.112 N Fe2+ ions = (47.2 × 0.112 × 55.5)/1000 = 0.2934. Mass of iron = 0.2934 g. % of iron in the ore = (0.2934/0.804) × 100 = 36.49. 3Fe → Fe3O4 (3 × 55.5 = 166.5; 3 × 55.5 + 64 = 230.5). 3 × 55.5 g of iron form 230.5 g Fe3O4; 0.2934 g of iron will form (230.5/166.5) × 0.2934 = 0.406 g. % of Fe3O4 in the ore = (0.406/0.804) × 100 = 50.5.
Teacher's Note: Fe2+ n-factor is 1; convert iron mass to Fe3O4 by 3Fe : Fe3O4.
Exam Note: Use Fe = 55.5 as the book does.
Question 54. An equal volume of a reducing agent is treated separately with 1 M KMnO4 in acid, neutral and alkaline media. The volume of KMnO4 required are 20 mL in acid, 33.4 mL in neutral and 100 mL in alkaline media. Find out the oxidation state of manganese in each reaction product. Give the balanced equations for all the three half reactions. Find out the volume of 1 M K2Cr2O7 consumed, if the same volume of the reducing agent is treated in acid medium.
Solution. Let N1, N2 and N3 be the normalities of 1 M KMnO4 solution in acid, neutral and alkaline mediums, respectively. 20 mL N1 ≡ 33.4 mL N2 ≡ 100 mL N3. In acidic medium the half reaction is MnO4− + 8H+ + 5e− ⇌ Mn2+ + 4H2O, so 1 M KMnO4 = 5 N KMnO4. Thus N2 = (20/33.4) × N1 = (20/33.4) × 5 N = 3 N and N3 = (20/100) × N1 = (20/100) × 5 N = 1 N. The equations in the three media: acid, MnO4− + 5e− → Mn2+; neutral, MnO4− + 3e− → Mn4+; alkaline, MnO4− + e− → Mn6+. Oxidation states of Mn in the products: +2 (acid), +4 (neutral, as MnO2), +6 (alkaline, as MnO42−). The balanced equations are: Acid: MnO4− + 8H+ + 5e− → Mn2+ + 4H2O. Neutral: MnO4− + 2H2O + 3e− → MnO2 + 4OH−. Alkaline: MnO4− + e− → MnO42−. For acidified K2Cr2O7: Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O (printed as 3Cr3+; see correction), so 1 M K2Cr2O7 = 6 N. Volume required: 20 mL × 5 N = V × 6 N, V = (20 × 5)/6 = 16.66 mL.
Corrected: the Cr2O72− half reaction gives 2Cr3+ (the book prints 3Cr3+, which does not balance); the volume 16.66 mL is unaffected.
Teacher's Note: Same reductant means equal equivalents: M × n-factor × V is constant across media.
Exam Note: Neutral n = 3, alkaline n = 1, acid n = 5.
Question 55. 1.6 g of pyrolusite ore was treated with 50 cm3 of 1.0 N oxalic acid and some sulphuric acid. The oxalic acid left undecomposed was raised to 250 cm3 in a flask. 25 cm3 of this solution when titrated with 0.1 N KMnO4 required 32 cm3 of the solution. Find the percentage of pure MnO2 in the sample and also the percentage of available oxygen. (IIT 1996)
Solution. 25 cm3 of undecomposed oxalic acid required = 32 cm3 0.1 N KMnO4 solution. Thus, 250 cm3 of undecomposed oxalic acid required = 320 cm3 0.1 N KMnO4 solution ≡ 32 cm3 1 N KMnO4 solution ≡ 32 cm3 1 N oxalic acid solution. Oxalic acid used by pyrolusite = (50 − 32) cm3 1 N solution = 18 cm3 1 N solution ≡ 18 cm3 1 N MnO2 solution. Mass of MnO2 = (N × E × V)/1000 = (1 × 18 × 87)/(1000 × 2) = 0.783 g. Percentage of MnO2 = (0.783/1.6) × 100 = 48.9. MnO2 → MnO + O (87 g; 16 g). Oxygen given by 0.783 g MnO2 = (16/87) × 0.783 = 0.144 g. % of available oxygen = (0.144/1.6) × 100 = 9.0.
Teacher's Note: Back titration: oxalic acid left over is found with KMnO4; the rest reacted with MnO2.
Exam Note: Scale the 25 cm3 aliquot to 250 cm3.
Question 56. A mixture of H2C2O4 and NaHC2O4 weighing 2.02 g was dissolved in water and the solution made up to one litre. 10 mL of this solution required 3.0 mL of 0.1 N NaOH solution for complete neutralisation. In another experiment 10 mL of same solution in hot dilute H2SO4 medium required 4 mL of 0.1 N KMnO4 for complete neutralisation. Calculate the amount of H2C2O4 and NaHC2O4 in the mixture. (IIT 1990)
Solution. Let mass of H2C2O4 present in the mixture be a g in 1 litre and mass of NaHC2O4 be b g in 1 litre.
For acid-base reaction: H2C2O4 + 2NaOH → Na2C2O4 + 2H2O, eq. mass = 90/2 = 45; NaHC2O4 + NaOH → Na2C2O4 + H2O, eq. mass = 112/1 = 112. Equivalents of H2C2O4 + equivalents of NaHC2O4 in 10 mL solution = 3 × 0.1/1000: (a × 10)/(45 × 1000) + (b × 10)/(112 × 1000) = 3 × 0.1/1000, or 112a + 45b = (3 × 0.1 × 45 × 112)/10 = 151.2 ... (i)
For redox reaction: eq. mass of H2C2O4 = 90/2 = 45; eq. mass of NaHC2O4 = 112/2 = 56 (change in oxidation number of carbon per molecule = 2; C23+ → 2C4+). (a × 10)/(45 × 1000) + (b × 10)/(56 × 1000) = 4 × 0.1/1000, or 56a + 45b = 100.8 ... (ii). Solving equations (i) and (ii): a = 0.9 g and b = 1.12 g.
Teacher's Note: Two titrations give two equations: NaOH sees acid strength, KMnO4 sees oxidation capacity.
Exam Note: Equivalent mass of NaHC2O4 is 112 vs NaOH, 56 vs KMnO4.
Question 57. A 3.0 g sample containing Fe3O4, Fe2O3 and an inert impure substance is treated with excess of KI solution in presence of dilute H2SO4. The entire iron is converted to Fe2+ along with the liberation of iodine. The resulting solution is diluted to 100 mL. A 20 mL of the dilute solution requires 11.0 mL of 0.5 M Na2S2O3 solution to reduce the iodine present. A 50 mL of the diluted solution after complete extraction of iodine requires 12.8 mL of 0.25 M KMnO4 solution in dilute H2SO4 medium for oxidation of Fe2+. Calculate the percentage of Fe2O3 and Fe3O4 in the original sample. (IIT 1996)
Solution. Fe3O4 is an equimolar mixture of Fe2O3 and FeO. Thus, the sample contains Fe2O3, FeO and impurities. The amount of iodine liberated depends on the amount of Fe2O3 and the entire iron is converted into Fe2+. Fe3O4 + 2KI + H2SO4 → 3FeO + H2O + K2SO4 + I2; Fe2O3 + KI + H2SO4 → 2FeO + H2O + K2SO4 + I2.
5 × 11.0 mL of 0.5 M Na2S2O3 = 55.0 mL of 0.5 N Na2S2O3 ≡ 55.0 mL of 0.5 N I2 ≡ 55.0 mL of 0.5 N Fe2O3 = 27.5 × 10−3 equivalent Fe2O3 = 13.75 × 10−3 moles Fe2O3.
2 × 12.8 mL of 0.25 M KMnO4 ≡ 25.6 mL of 1.25 N KMnO4 ≡ 25.6 mL of 1.25 N FeO soln. = 32.0 × 10−3 equivalent FeO = 32.0 × 10−3 moles FeO. Moles of FeO in Fe3O4 = 0.032 − 0.0275 = 0.0045. Mass of Fe3O4 = 0.0045 × 232 = 1.044 g. Moles of Fe2O3 existing separately = 0.01375 − 0.0045 = 0.00925. Mass of Fe2O3 = 0.00925 × 160 = 1.48 g. % Fe3O4 = (1.044/3) × 100 = 34.8; % Fe2O3 = (1.48/3) × 100 = 49.33.
Check: with n(Fe3O4) = a and n(Fe2O3) = b: a + b = 13.75 mmol (iodine) and 3a + 2b = 32 mmol (Fe2+), giving a = 4.5 mmol, b = 9.25 mmol, the same result.
Teacher's Note: Iodine count gives total oxide moles; Fe2+ count gives FeO; solve two equations.
Exam Note: Both oxides give 1 mol I2 per mole; use both titrations.
Question 58. Hydroxylamine reduces iron (III) according to the equation, 2NH2OH + 4Fe3+ → N2O(g)↑ + H2O + 4Fe2+ + 4H+. Iron (II) thus produced is estimated by titration with a standard permanganate solution. The reaction is: MnO4− + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O. A 10 mL sample of hydroxylamine solution was diluted to one litre. 50 mL of this diluted solution was boiled with excess of iron (III) solution. The resulting solution required 12 mL of 0.02 M KMnO4 solution for complete oxidation of iron (II). Calculate the mass of hydroxylamine in one litre of the original solution.
Solution. 12 mL of 0.02 M KMnO4 ≡ 12 mL of 0.1 N KMnO4 ≡ 12 mL of 0.1 N Fe2+ ≡ 12 mL of 0.1 N NH2OH. Eq. mass of NH2OH = Mol. mass/2 = 33/2 = 16.5. Mass of NH2OH in 12 mL of 0.1 N NH2OH soln. = (N × E × V)/1000 = (0.1 × 16.5 × 12)/1000 = 0.0198 g. 50 mL of diluted solution contains NH2OH = 0.0198 g; 1000 mL of diluted solution contains NH2OH = (0.0198/50) × 1000 = 0.396 g. 10 mL of original solution contains NH2OH = 0.396 g; 1000 mL of original solution contains NH2OH = 100 × 0.396 = 39.6 g.
Teacher's Note: Two dilution steps: 50 mL to 1 L, then 10 mL original to 1 L (factor 100).
Exam Note: Do not forget the 100-fold factor from 10 mL original.
Question 59. 0.56 g of limestone was treated with oxalic acid to give CaC2O4. The precipitate decolourised 45 mL of 0.2 N KMnO4 in acid solution. Calculate the % of CaO in limestone.
Solution. 45 mL of 0.2 N KMnO4 = 45 mL of 0.2 N CaC2O4 = 45 mL of 0.2 N CaCO3 = 45 mL of 0.2 N CaO. Mass of CaO = (N × E × V)/1000 = (0.2 × 28 × 45)/1000 = 0.252 g. % of CaO in limestone = (0.252/0.56) × 100 = 45.
Teacher's Note: Equivalents conserved through Ca: CaC2O4 = CaCO3 = CaO, with E = 28.
Exam Note: Equivalent mass of CaO is 28.
Question 60. A solution of 0.2 g of a compound containing Cu2+ and C2O42− ions on titration with 0.02 M KMnO4 in presence of H2SO4 consumes 22.6 mL oxidant. The resulting solution is neutralised by Na2CO3, acidified with dilute acetic acid and titrated with excess of KI. The liberated iodine required 11.3 mL of 0.05 M Na2S2O3 for complete reduction. Find out the mole ratio of Cu2+ and C2O42− in the compound. (IIT 1991)
Solution. 1st case: Only C2O42− ions are oxidised by KMnO4 solution. Normality of KMnO4 solution = 0.02 × 5 = 0.1 N. 22.6 mL of 0.1 N KMnO4 ≡ 22.6 mL of 0.1 N C2O42− soln. Mass of C2O42− ions = (N × E × V)/1000 = (N × M × V)/(1000 × 2). No. of moles of C2O42− ions = (N × V)/2000 = (0.1 × 22.6)/2000 = 11.3 × 10−4.
2nd case: Only Cu2+ ions are reduced by KI and iodine liberated is neutralised by Na2S2O3 solution. 11.3 mL of 0.05 M Na2S2O3 ≡ 11.3 mL of 0.05 N Na2S2O3 ≡ 11.3 mL of 0.05 N I2 ≡ 11.3 mL of 0.05 N Cu2+. No. of moles of Cu2+ ions = (N × V)/1000 = (0.05 × 11.3)/1000 = 5.65 × 10−4. Molar ratio of Cu2+/C2O42− = (5.65 × 10−4)/(11.3 × 10−4) = 1/2.
Teacher's Note: Oxalate is titrated by KMnO4 (n = 2); Cu2+ by iodometry (n = 1).
Exam Note: Cu2+ to Cu+ has n = 1; oxalate n = 2.
Question 61. 12 g of an impure sample of arsenious oxide was dissolved in water containing 7.5 g of sodium bicarbonate and the resulting solution was diluted to 250 mL. 25 mL of this solution were completely oxidized by 22.4 mL of a solution of iodine. 25 mL of this iodine solution reacted with same volume of a solution containing 24.8 g of sodium thiosulphate (Na2S2O3·5H2O) in one litre. Calculate the percentage of arsenious oxide in the sample. (Atomic mass of As = 75) (IIT 1999)
Solution. Normality of Na2S2O3 soln. = 24.8/248 = 0.1 N. Applying N1V1 = N2V2: volume of iodine soln. × normality of iodine soln. = volume of thiosulphate × its normality, so 25 × N1 = 22.4 × 0.1, N1 = (22.4 × 0.1)/25. Amount of As2O3 present in 250 mL of the solution = N1 × (Equivalent mass of As2O3/1000) × 250 = (22.4 × 0.1/25) × (198/4) × (250/1000) = 1.1088 g. Percentage of As2O3 = (1.1088/12) × 100 = 9.24.
Teacher's Note: Iodine is standardised against thiosulphate first, then used to titrate As2O3 (E = 198/4).
Exam Note: As2O3 equivalent mass is 49.5 (n = 4).
Question 62. Hydrogen peroxide solution (20 mL) reacts quantitatively with a solution of KMnO4 (20 mL) acidified with dilute H2SO4. The same volume of the KMnO4 solution is just decolourised by 10 mL of MnSO4 in neutral medium simultaneously forming a dark brown precipitate of hydrated MnO2. The brown precipitate is dissolved in 10 mL of 0.2 M sodium oxalate under boiling condition in the presence of dilute H2SO4. Write the balanced equations involved in the reactions and calculate the molarity of H2O2. (IIT 2001)
Solution. (i) MnO2 + Na2C2O4 + 2H2SO4 → MnSO4 + Na2SO4 + 2CO2 + 2H2O (1 mole MnO2 : 1 mole oxalate). mM of MnO2 = mM of Na2C2O4 = 10 × 0.2 = 2.
(ii) 2KMnO4 + 3MnSO4 + 2H2O → 5MnO2 + K2SO4 + 2H2SO4 (2 mole : 5 mole). mM of KMnO4 = mM of MnO2 × 2/5 = 2 × 2/5 = 4/5.
(iii) 2KMnO4 + 3H2SO4 + 5H2O2 → K2SO4 + 2MnSO4 + 8H2O + 5O2 (2 mole : 5 mole). mM of H2O2 = mM of KMnO4 × 5/2 = (4/5) × (5/2) = 2. Therefore M × 20 = 2, or M(H2O2) = 2/20 = 0.1 M.
Teacher's Note: Chain of three balanced equations; track millimoles backwards from oxalate to H2O2.
Exam Note: Use mole ratios 1:1, 2:5, 5:2 in sequence.
Question 63. The Mn3O4 formed on strong heating of a sample of MnSO4·4H2O was dissolved in 100 cm3 of 0.1 N FeSO4 containing dilute H2SO4. The resulting solution reacted completely with 50 cm3 of KMnO4 solution. 25 cm3 of this KMnO4 solution requires 30 cm3 of 0.1 N FeSO4 solution for complete reaction. Calculate the amount of MnSO4·4H2O in the sample. (IIT 2001)
Solution. MnSO4·4H2O → (heat) Mn3O4. Mn3O4 is dissolved in ferrous sulphate solution and is reduced from Mn(8/3)+ to Mn2+. The excess of FeSO4 is estimated by titration with KMnO4 solution. For normality of KMnO4 solution: 25 × N = 30 × 0.1, N = 30 × 0.1/25 = 3/25. Let the volume of unreacted FeSO4 solution be V mL: V mL of 0.1 N FeSO4 = 50 mL of (3/25) N KMnO4, or V = (50 × 3)/(0.1 × 25) = 60 mL. Volume of FeSO4 used for Mn3O4 = (100 − 60) mL = 40 mL. 40 mL of 0.1 N FeSO4 ≡ 40 mL of 0.1 N Mn3O4 ≡ 40 mL of 0.1 N MnSO4·4H2O. Mass of MnSO4·4H2O = (E × 0.1 × 40)/1000 = E/250 g. Equivalent mass of MnSO4·4H2O = M/((8/3) − 2) = 3M/2 = 3 × 223/2. Mass of MnSO4·4H2O = (3 × 223)/(2 × 250) = 1.338 g.
Teacher's Note: Mn in Mn3O4 averages +8/3, so n-factor per Mn is 2/3 and E = 3M/2.
Exam Note: Back titration with KMnO4 gives unreacted FeSO4.
JEE Mathematics: OP Tandon Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 14 Volumetric Analysis Part 1
Access JEE Mathematics Solutions
Explore reliable mathematical solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 14 Volumetric Analysis Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.