Narendra Awasthi Solutions Physical Chemistry Chapter 11 Surface Chemistry

Download JEE Chemistry Narendra Awasthi Textbook Solutions: Chapter 11 Surface Chemistry

Review structured textbook solutions for JEE Chemistry Chapter 11 Surface Chemistry prepared by Narendra Awasthi. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Access Narendra Awasthi Textbook Answers and Solutions

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Narendra Awasthi Physical Chemistry Chapter 11 Surface Chemistry - Problems in Chemistry, Levels 1-3 and Practice Sets

Level 1

Question Level 1, 1. The size of particles in suspension, true solution and colloidal solution varies in the order:

(a) suspension > colloidal > true solution

(b) true solution > suspension > colloidal

(c) suspension > colloidal = true solution

(d) none of these

Solution. Answer: (a) suspension > colloidal > true solution. Suspension particles exceed 1000 nm, colloids lie between 1 nm and 1000 nm, true-solution particles are below 1 nm.

Teacher's Note: Sizes: true solution < 1 nm < colloid < 1000 nm < suspension.

Exam Note: Learn the three size limits.

Question Level 1, 2. A colloidal system has what size of particles?

(a) 10-4 m to 10-10 m

(b) 10-5 m to 10-7 m

(c) 10-9 m to 10-12 m

(d) 10-6 m to 10-9 m

Solution. Answer: (d) 10-6 m to 10-9 m. Colloidal range is 1 nm to 1000 nm, that is 10-9 m to 10-6 m.

Teacher's Note: Convert 1 nm to 1000 nm into metres to pick the range.

Exam Note: Colloid size: 1-1000 nm.

Question Level 1, 3. Which are not purely surface phenomena?

(a) Adsorption, surface tension

(b) Surface tension, viscosity

(c) Adsorption, viscosity

(d) Absorption, viscosity

Solution. Answer: (d) Absorption, viscosity. Absorption (bulk process) and viscosity (bulk property) are not purely surface phenomena.

Teacher's Note: Absorption occurs through the bulk; adsorption stays on the surface.

Exam Note: Contrast absorption with adsorption.

Question Level 1, 4. Adsorbed acetic acid on activated carbon is:

(a) adsorber

(b) absorber

(c) adsorbent

(d) adsorbate

Solution. Answer: (d) adsorbate. The substance accumulating on the surface is the adsorbate; the carbon is the adsorbent.

Teacher's Note: Adsorbate is what sticks; adsorbent is the surface holding it.

Exam Note: Define adsorbate versus adsorbent.

Question Level 1, 5. Adsorption due to strong chemical forces is called:

(a) Chemisorption

(b) Physisorption

(c) Both (a) and (b)

(d) None of these

Solution. Answer: (a) Chemisorption. Strong chemical-bond-like forces give chemisorption.

Teacher's Note: Strong bond-like forces mean chemisorption, van der Waals means physisorption.

Exam Note: Name type by force involved.

Question Level 1, 6. Adsorption of gases on a solid surface is exothermic because:

(a) free energy increases

(b) entropy decreases

(c) entropy increases

(d) interaction developed between gas and solid particles

Solution. Answer: (d) interaction developed between gas and solid particles. Heat is evolved because of the interaction developed between gas and solid particles.

Teacher's Note: Heat is released as gas molecules bind to the surface.

Exam Note: Adsorption is exothermic: ΔH negative.

Question Level 1, 7. The nature of bonding forces in adsorption is:

(a) purely physical such as van der Waals' forces

(b) purely chemical

(c) both chemical and physical are possible

(d) none of these

Solution. Answer: (c) both chemical and physical are possible. Physisorption involves van der Waals forces and chemisorption involves chemical bonds, so both are possible.

Teacher's Note: Both physisorption and chemisorption exist as adsorption types.

Exam Note: Two types, two force natures.

Question Level 1, 8. Which one of the following is not applicable to chemisorption?

(a) Heat of adsorption is negative

(b) It takes place at high temperature

(c) It is reversible

(d) It forms mono-molecular layer

Solution. Answer: (c) It is reversible. Chemisorption is irreversible; the other three statements are true for it.

Teacher's Note: Chemisorption is irreversible and monolayer; physisorption is reversible.

Exam Note: Chemisorption: irreversible, monolayer.

Question Level 1, 9. Which one of the following characteristics is correct for physical adsorption?

(a) It is very specific

(b) Adsorption on solids is irreversible

(c) Adsorption decreases with decrease in temperature

(d) Generally both enthalpy and entropy of adsorption are negative

Solution. Answer: (d) Generally both enthalpy and entropy of adsorption are negative. Physical adsorption is non-specific, reversible and increases as temperature falls; both ΔH and ΔS are negative.

Teacher's Note: Gas loses freedom, so entropy falls; heat is released.

Exam Note: ΔH and ΔS both negative.

Question Level 1, 10. Which of the following statements is not correct?

(a) Physical adsorption is due to van der Waals' forces

(b) Physical adsorption is irreversible

(c) Chemical adsorption increases with increase in temperature up to certain limit then decreases

(d) Enthalpy of adsorption (|ΔH|) for a chemical adsorption is greater than that of physical adsorption

Solution. Answer: (b) Physical adsorption is irreversible. Physical adsorption is reversible, so statement (b) is wrong.

Teacher's Note: Physisorption is reversible; chemisorption is not.

Exam Note: Spot the false statement.

Question Level 1, 11. Which gas will be adsorbed on a solid to greater extent?

(a) Having non-polar molecule

(b) Having highest critical temperature

(c) Having lowest critical temperature

(d) Having lowest critical pressure

Solution. Answer: (b) Having highest critical temperature. Gases with higher critical temperature liquefy more easily and are adsorbed more.

Teacher's Note: Easily liquefiable gases have stronger van der Waals forces.

Exam Note: Higher Tc means more adsorption.

Question Level 1, 12. Which of the following factors affects the adsorption of a gas on solid?

(a) Critical temperature (Tc)

(b) Temperature of gas

(c) Pressure of gas

(d) All of these

Solution. Answer: (d) All of these. Critical temperature, temperature and pressure all affect the extent of adsorption.

Teacher's Note: Nature of gas, temperature and pressure all matter.

Exam Note: List the factors affecting adsorption.

Question Level 1, 13. Which gas is adsorbed to maximum amount by activated carbon?

(a) H2(g)

(b) He(g)

(c) CO(g)

(d) CO2(g)

Solution. Answer: (d) CO2(g). CO2 has the highest critical temperature among these, so it is adsorbed most.

Teacher's Note: Compare critical temperatures: CO2 highest here.

Exam Note: Pick the most easily liquefied gas.

Question Level 1, 14. The volume of gases NH3, CO2 and H2 adsorbed by one gram of charcoal at 300 K is in the order of:

(a) H2 > CO2 > NH3

(b) NH3 > H2 > CO2

(c) NH3 > CO2 > H2

(d) CO2 > NH3 > H2

Solution. Answer: (c) NH3 > CO2 > H2. Ease of liquefaction is NH3 > CO2 > H2, so adsorption follows the same order.

Teacher's Note: Order follows critical temperatures: NH3, CO2, H2.

Exam Note: Rank by ease of liquefaction.

Question Level 1, 15. Which of the following is used to adsorb water?

(a) Silica gel

(b) Calcium acetate

(c) Hair gel

(d) Anhydrous CaCl2

Solution. Answer: (a) Silica gel. Silica gel adsorbs water vapour on its surface; anhydrous CaCl2 absorbs it.

Teacher's Note: Silica gel adsorbs moisture; CaCl2 absorbs it.

Exam Note: Silica gel is the adsorbent for water.

Question Level 1, 16. Absorption and adsorption are respectively:

(a) surface phenomena, bulk phenomena

(b) bulk phenomena, surface phenomena

(c) both are bulk phenomena

(d) both are surface phenomena

Solution. Answer: (b) bulk phenomena, surface phenomena. Absorption occurs throughout the bulk; adsorption occurs only at the surface.

Teacher's Note: Absorption: bulk. Adsorption: surface.

Exam Note: State the difference in one line.

Question Level 1, 17. Adsorption is multilayer in case of:

(a) physical adsorption

(b) chemisorption

(c) both (a) and (b)

(d) none of these

Solution. Answer: (a) physical adsorption. Physical adsorption forms multimolecular layers; chemisorption forms a monolayer.

Teacher's Note: Physisorption can pile up layers; chemisorption stops at one.

Exam Note: Physisorption: multilayer.

Question Level 1, 18. Reversible adsorption is:

(a) chemical adsorption

(b) physical adsorption

(c) both (a) and (b)

(d) none of these

Solution. Answer: (b) physical adsorption. Physical adsorption is reversible; chemical adsorption is irreversible.

Teacher's Note: Weak van der Waals forces allow desorption on heating or lowering pressure.

Exam Note: Physisorption: reversible.

Question Level 1, 19. The effect of pressure on adsorption is high if:

(a) temperature is low

(b) temperature is high

(c) temperature is very high

(d) larger charcoal piece is taken

Solution. Answer: (a) temperature is low. Low temperature favours adsorption, so pressure has its greatest effect there.

Teacher's Note: Adsorption is exothermic, so low temperature helps.

Exam Note: Low T, high P favour adsorption.

Question Level 1, 20. Sorption is the phenomenon:

(a) reverse of adsorption

(b) reverse of absorption

(c) when adsorption and absorption takes place simultaneously

(d) none of these

Solution. Answer: (c) when adsorption and absorption takes place simultaneously. Sorption is simultaneous adsorption and absorption, for example dyeing of fabric.

Teacher's Note: Sorption combines adsorption and absorption.

Exam Note: Define sorption with an example.

Question Level 1, 21. Which of the following adsorption isotherms represents the adsorption of a gas by a solid involving multilayers of layers? (Ps = saturation pressure) [Options are graphs of x/m against P: (a) curve rising to a plateau before Ps; (b) rising curve with a small bump near Ps; (c) rise, a plateau, then a steep rise as P approaches Ps; (d) slow rise then a steep rise near Ps.]

(a) (a)

(b) (b)

(c) (c)

(d) (d)

Solution. Answer: (c) (c). Corrected: the printed key gives (a), but (a) is the Langmuir monolayer isotherm (saturating plateau). Multilayer physisorption gives the S-shaped isotherm of graph (c): a first-layer plateau, then x/m rises steeply near Ps as further layers form.

Teacher's Note: A plateau means monolayer completion; a further rise near Ps signals multilayers.

Exam Note: Multilayer isotherm rises again near Ps.

Question Level 1, 22. A plot of log(x/M) against log P for the adsorption of a gas on a solid gives a straight line with slope equal to:

(a) 1/n

(b) n

(c) log K

(d) K

Solution. Answer: (a) 1/n. Freundlich: log(x/m) = log k + (1/n) log P, so slope = 1/n.

Teacher's Note: Compare with y = c + mx: slope is 1/n, intercept log k.

Exam Note: Slope 1/n, intercept log k.

Question Level 1, 23. The heat evolved in chemisorption lies in the range (in kJ/mol) of:

(a) 80 to 240

(b) 20 to 40

(c) 40 to 80

(d) 20 to 100

Solution. Answer: (a) 80 to 240. Chemisorption enthalpy is large, 80-240 kJ/mol.

Teacher's Note: Chemisorption heat is close to bond energies.

Exam Note: Chemisorption 80-240; physisorption 20-40.

Question Level 1, 24. The heat evolved in physisorption lies in the range (in kJ/mol) of:

(a) 20-40

(b) 40-100

(c) 100-200

(d) 200-400

Solution. Answer: (a) 20-40. Physisorption enthalpy is low, 20-40 kJ/mol.

Teacher's Note: Weak van der Waals forces mean small heat release.

Exam Note: Physisorption 20-40 kJ/mol.

Question Level 1, 25. According to the adsorption theory of catalysis, the speed of the reaction increases because:

(a) in the process of adsorption, the activation energy of the molecules becomes large

(b) adsorption produces heat which increases the speed of the reaction

(c) adsorption lowers the activation energy of the reaction

(d) adsorption increases the activation energy of the reaction

Solution. Answer: (c) adsorption lowers the activation energy of the reaction. Adsorption on the catalyst surface lowers the activation energy and so increases the rate.

Teacher's Note: Catalyst surface provides a lower-energy path via adsorbed intermediates.

Exam Note: Catalysis lowers activation energy.

Question Level 1, 26. 3.6 gram of oxygen is adsorbed on 1.2 g of metal powder. What volume of oxygen adsorbed per gram of the adsorbent at 1 atm and 273 K?

(a) 0.19 L g-1

(b) 1 L g-1

(c) 2.1 L g-1

(d) None of these

Solution. Answer: (c) 2.1 L g-1. Mass of O2 per gram of adsorbent = 3.6/1.2 = 3 g. Moles = 3/32. Volume = (3/32) × 0.0821 × 273 / 1 = 2.10 L. Hence 2.1 L g-1.

Teacher's Note: Convert grams per gram of adsorbent to moles, then to volume with PV = nRT.

Exam Note: Show mass, moles, then volume.

Question Level 1, 27. A catalytic poison renders the catalyst ineffective because:

(a) It is preferentially adsorbed on the catalyst

(b) It adsorbs the molecules of the reactants

(c) It combines chemically with the catalyst

(d) It combines chemically with one of the reactants

Solution. Answer: (a) It is preferentially adsorbed on the catalyst. The poison is preferentially adsorbed on the catalyst surface, blocking sites for the reactants.

Teacher's Note: Poison occupies active sites so reactants cannot adsorb.

Exam Note: Poison blocks active sites.

Question Level 1, 28. The catalyst used in the hydrogenation of oils is:

(a) Fe

(b) Ni

(c) Pt

(d) V2O5

Solution. Answer: (b) Ni. Finely divided nickel catalyses hydrogenation of vegetable oils.

Teacher's Note: Ni for oils, Fe for Haber, V2O5 for contact process.

Exam Note: Match catalyst to process.

Question Level 1, 29. The function of zymase is to:

(a) Change starch into sugar

(b) Ferment glucose to alcohol and CO2

(c) Change malt sugar into glucose

(d) Change starch into malt sugar and dextrin

Solution. Answer: (b) Ferment glucose to alcohol and CO2. Zymase converts glucose into ethanol and CO2: C6H12O6 → 2C2H5OH + 2CO2.

Teacher's Note: Zymase works in fermentation of glucose.

Exam Note: Know each enzyme and its substrate.

Question Level 1, 30. The conversion of maltose to glucose is possible by the enzyme:

(a) Zymase

(b) Lactase

(c) Maltase

(d) Diastase

Solution. Answer: (c) Maltase. Maltase hydrolyses maltose into two glucose molecules.

Teacher's Note: Enzyme names follow the sugar: maltase acts on maltose.

Exam Note: Maltose to glucose: maltase.

Question Level 1, 31. Shape selective catalysis is a reaction catalysed by:

(a) Enzymes

(b) Ziegler-Natta Catalyst

(c) Zeolites

(d) Platinum

Solution. Answer: (c) Zeolites. Zeolites, with pores of fixed size, give shape-selective catalysis.

Teacher's Note: Zeolite pore size selects which molecules react.

Exam Note: Shape-selective: zeolites.

Question Level 1, 32. The process which is catalysed by one of the product is called:

(a) acid-base catalysis

(b) autocatalysis

(c) negative catalysis

(d) homogeneous catalysis

Solution. Answer: (b) autocatalysis. A reaction catalysed by one of its own products is autocatalysis (for example Mn2+ in permanganate-oxalate titration).

Teacher's Note: Autocatalyst: the product that speeds up its own reaction.

Exam Note: Mn2+ is the classic autocatalyst.

Question Level 1, 33. An inhibitor is essentially:

(a) a negative catalyst

(b) a heterogeneous catalyst

(c) an auto catalyst

(d) a homogeneous catalyst

Solution. Answer: (a) a negative catalyst. An inhibitor decreases the reaction rate, so it acts as a negative catalyst.

Teacher's Note: Inhibitors slow reactions; they are negative catalysts.

Exam Note: Define negative catalyst.

Question Level 1, 34. A catalyst in the finely divided form is most effective because:

(a) less surface area is available

(b) more active sites are formed

(c) more energy gets stored in the catalyst

(d) none of these

Solution. Answer: (b) more active sites are formed. Fine division increases the surface area and gives more active sites for adsorption of reactants.

Teacher's Note: Greater surface area means more active sites.

Exam Note: Link surface area to active sites.

Question Level 1, 35. Identify the correct statement regarding enzymes:

(a) Enzymes are specific biological catalysts that normally works at high temperature

(b) Enzymes are normally heterogeneous catalysts decreases reaction rate

(c) Enzymes are specific biological catalysts with low molar masses

(d) Enzymes are specific biological catalysts that are very specific in nature

Solution. Answer: (d) Enzymes are specific biological catalysts that are very specific in nature. Enzymes are biological catalysts that are highly specific; they work at moderate temperature and have large molar masses.

Teacher's Note: Enzymes: specific, mild temperature, large protein molecules.

Exam Note: State enzyme specificity.

Question Level 1, 36. A liquid leaves no residue when passed through the ultra-filter paper. The liquid is:

(a) a suspension

(b) oil

(c) a colloidal sol

(d) a true solution

Solution. Answer: (d) a true solution. Ultra-filter paper retains colloidal particles, so only a true solution passes without residue.

Teacher's Note: Only true-solution particles pass through ultrafilter paper.

Exam Note: Ultrafilter separates sols from solutions.

Question Level 1, 37. Crystalloids differ from colloids mainly in respect of:

(a) Electrical behaviour

(b) Particle nature

(c) Particle size

(d) Solubility

Solution. Answer: (c) Particle size. Crystalloid particles are smaller than 1 nm while colloidal particles are 1-1000 nm, so they differ mainly in particle size.

Teacher's Note: Size separates crystalloids from colloids.

Exam Note: Mention the 1 nm limit.

Question Level 1, 38. Surface tension of lyophilic sols is:

(a) lower than water

(b) more than water

(c) equal to water

(d) none of these

Solution. Answer: (a) lower than water. Lyophilic sols have surface tension lower than that of water.

Teacher's Note: Lyophilic sols: lower surface tension, higher viscosity.

Exam Note: Compare lyophilic and lyophobic properties.

Question Level 1, 39. Which one of the following is not used for preparing lyophilic sols?

(a) Starch

(b) Gum

(c) Gelatin

(d) Metal sulphide

Solution. Answer: (d) Metal sulphide. Starch, gum and gelatin give lyophilic sols directly; metal sulphide sols are lyophobic.

Teacher's Note: Organic substances are lyophilic; metal sulphides are lyophobic.

Exam Note: Lyophobic: metal sols and sulphides.

Question Level 1, 40. Which one of the sols acts as protective colloid?

(a) As2S3

(b) Gelatin

(c) Au

(d) Fe(OH)3

Solution. Answer: (b) Gelatin. Lyophilic sols such as gelatin protect lyophobic sols from coagulation.

Teacher's Note: Lyophilic colloids protect lyophobic ones.

Exam Note: Protective colloids are lyophilic.

Question Level 1, 41. Which one of the following is lyophilic colloid?

(a) Pt

(b) Gum

(c) Fog

(d) Blood

Solution. Answer: (b) Gum. Gum is lyophilic; Pt is a lyophobic metal sol and fog is an aerosol.

Teacher's Note: Natural gums disperse readily in water.

Exam Note: Gum, gelatin, starch are lyophilic.

Question Level 1, 42. Small liquid droplets dispersed in another liquid is called:

(a) suspension

(b) emulsion

(c) gel

(d) true solution

Solution. Answer: (b) emulsion. A liquid dispersed in another immiscible liquid is an emulsion.

Teacher's Note: Liquid in liquid defines an emulsion.

Exam Note: Define emulsion.

Question Level 1, 43. Which of the following is an example of associated colloid?

(a) Protein in water

(b) Soap in water

(c) Rubber in benzene

(d) FeCl3 in H2O

Solution. Answer: (b) Soap in water. Soap forms micelles above the CMC and Kraft temperature, so it is an associated colloid.

Teacher's Note: Soaps aggregate into micelles above the CMC.

Exam Note: Associated colloids form micelles.

Question Level 1, 44. Select the properties which are for lyophilic colloidal sols:

(a) viscosity same as that of the medium

(b) extensive hydration takes place

(c) particles migrate either towards cathode or anode in an electric field

(d) particle cannot be detected even under ultramicroscope

Solution. Answer: (b) extensive hydration takes place. Lyophilic particles are heavily solvated (hydrated); viscosity is higher than the medium and migration is not always seen.

Teacher's Note: Lyophilic particles are strongly solvated.

Exam Note: Hydration is the lyophilic hallmark.

Question Level 1, 45. Fog is an example of colloidal system of:

(a) liquid in a gas

(b) gas in a liquid

(c) gas in a solid

(d) solid in a liquid

Solution. Answer: (a) liquid in a gas. Fog has liquid droplets dispersed in a gas (aerosol).

Teacher's Note: Fog: liquid dispersed in gas.

Exam Note: Identify the dispersed phase first.

Question Level 1, 46. Colloidal solutions are not classified on the basis of:

(a) molecular size

(b) nature of the particles

(c) surface tension value

(d) interaction between disperse phase and dispersion medium

Solution. Answer: (c) surface tension value. Colloids are classified by size, nature of particles and interaction between phases, not by surface tension.

Teacher's Note: Classification uses size, type and affinity, not surface tension.

Exam Note: Know the classification bases.

Question Level 1, 47. All colloids:

(a) are suspensions of one phase in another

(b) are two-phase systems

(c) contain only water-soluble particles

(d) are true solutions

Solution. Answer: (b) are two-phase systems. A colloid has a dispersed phase and a dispersion medium, so it is a two-phase system.

Teacher's Note: Colloid = dispersed phase plus medium.

Exam Note: Colloids are heterogeneous.

Question Level 1, 48. Which of the following is a lyophobic colloid?

(a) Gelatin

(b) Sulphur

(c) Starch

(d) Gum arabic

Solution. Answer: (b) Sulphur. Sulphur sol is lyophobic; gelatin, starch and gum arabic are lyophilic.

Teacher's Note: Inorganic sols like sulphur are lyophobic.

Exam Note: Lyophobic: sulphur, metals, sulphides.

Question Level 1, 49. Which of the following is not a gel?

(a) Cheese

(b) Jellies

(c) Curd

(d) Milk

Solution. Answer: (d) Milk. Milk is an emulsion (liquid in liquid), not a gel.

Teacher's Note: Gels have liquid dispersed in solid; milk is an emulsion.

Exam Note: Milk: O/W emulsion.

Question Level 1, 50. Cleaning action of soap occurs because:

(a) non-polar tails of soap molecules dissolve in grease

(b) oil and grease dissolved into hydrophilic centres of soap micelles and washed away

(c) hydrophilic head dissolve in grease

(d) grease dissolve in soap solution

Solution. Answer: (a) non-polar tails of soap molecules dissolve in grease. The non-polar hydrocarbon tails dissolve in grease while the polar heads stay in water, forming micelles that are washed away.

Teacher's Note: Tails bind grease; heads face water.

Exam Note: Describe micelle formation.

Question Level 1, 51. Arsenous sulphide sol is prepared by passing H2S through arsenous oxide solution. The charge developed on the particles is due to adsorption of:

(a) H+

(b) S2-

(c) OH-

(d) O2-

Solution. Answer: (b) S2-. As2S3 particles adsorb the common ion S2- (from excess H2S), so the sol is negatively charged.

Teacher's Note: Sol adsorbs its own common ion in excess.

Exam Note: As2S3 sol is negative.

Question Level 1, 52. Bredig's arc method cannot be used for the preparation of colloidal sol of:

(a) copper

(b) gold

(c) silver

(d) sodium

Solution. Answer: (d) sodium. Sodium reacts with water, so it cannot be dispersed by the arc under water; Cu, Au and Ag can.

Teacher's Note: Reactive metals react with the dispersion medium.

Exam Note: Bredig arc: unreactive metals only.

Question Level 1, 53. As2S3 sol is:

(a) positive colloid

(b) negative colloid

(c) neutral colloid

(d) none of the above

Solution. Answer: (b) negative colloid. As2S3 is a negatively charged sol.

Teacher's Note: Metal sulphides give negative sols.

Exam Note: As2S3: negative; Fe(OH)3: positive.

Question Level 1, 54. Which of the following electrolyte will be most effective in coagulation of negative sol?

(a) KNO3

(b) K4[Fe(CN)6]

(c) Na3PO4

(d) MgCl2

Solution. Answer: (d) MgCl2. A negative sol is coagulated by cations; Mg2+ (divalent) beats K+ and Na+.

Teacher's Note: Look at the cation, since the sol is negative.

Exam Note: Hardy-Schulze: higher cation charge wins.

Question Level 1, 55. The minimum amount of an electrolyte required to cause coagulation of a sol is called:

(a) Coagulation value

(b) Gold number

(c) Protective value

(d) None of these

Solution. Answer: (a) Coagulation value. The minimum concentration of electrolyte that causes coagulation is the coagulation (flocculation) value.

Teacher's Note: Coagulation value is in millimoles per litre.

Exam Note: Define coagulation value.

Question Level 1, 56. The electrical charge on a colloidal particle is indicated by:

(a) Brownian movement

(b) electrophoresis

(c) ultramicroscope

(d) molecular sieves

Solution. Answer: (b) electrophoresis. Electrophoresis shows which electrode the particles move towards, hence their charge.

Teacher's Note: Direction of migration shows the sign.

Exam Note: Electrophoresis reveals charge.

Question Level 1, 57. Colloidal particles in a sol can be coagulated by:

(a) heating

(b) adding an electrolyte

(c) adding oppositely charged sol

(d) any of the above methods

Solution. Answer: (d) any of the above methods. Heating, adding electrolyte and mixing oppositely charged sols all cause coagulation.

Teacher's Note: Any method that neutralises particle charge coagulates.

Exam Note: List coagulation methods.

Question Level 1, 58. Peptization involves:

(a) precipitation of colloidal particles

(b) disintegration of colloidal aggregates

(c) purification of colloids

(d) impact of molecules of the dispersion medium on the colloidal particles

Solution. Answer: (b) disintegration of colloidal aggregates. Peptization converts a fresh precipitate into a sol by breaking the aggregates into colloidal particles.

Teacher's Note: Peptization is the reverse of coagulation.

Exam Note: Precipitate to sol by a peptizing agent.

Question Level 1, 59. Hardy-Schulze law states that:

(a) solution must have higher gold number

(b) disperse phase and dispersion medium must be of the same sign

(c) micelles coagulate in presence of surfactants

(d) the ions carrying more opposite charge to that of sol particle are effective in coagulation

Solution. Answer: (d) the ions carrying more opposite charge to that of sol particle are effective in coagulation. Coagulating power increases with the charge of the ion opposite in sign to the sol.

Teacher's Note: Higher valency of the oppositely charged ion coagulates better.

Exam Note: State the rule with an example.

Question Level 1, 60. Given below are a few electrolytes, indicate which one among them will bring about the coagulation of a gold sol quickest and in the least of concentration?

(a) NaCl

(b) MgSO4

(c) Al2(SO4)3

(d) K4[Fe(CN)6]

Solution. Answer: (c) Al2(SO4)3. Gold sol is negative, so the cation matters; Al3+ has the highest charge and is most effective.

Teacher's Note: Gold sol is negative; trivalent Al3+ is best.

Exam Note: Pick the highest-charge cation.

Question Level 1, 61. The ability of an ion to bring about coagulation of a given colloid depends upon:

(a) its size

(b) the magnitude of its charge only

(c) the sign of its charge alone

(d) both magnitude and sign of its charge

Solution. Answer: (d) both magnitude and sign of its charge. The ion must carry charge opposite to the sol (sign) and a greater charge coagulates better (magnitude).

Teacher's Note: Sign must oppose the sol; larger magnitude is better.

Exam Note: Both sign and magnitude count.

Question Level 1, 62. An emulsifying agent is a substance which?

(a) Stabilizes the emulsion

(b) De-stabilizes the emulsion

(c) Coagulates the emulsion

(d) Break the interfacial film between suspended particle and medium

Solution. Answer: (a) Stabilizes the emulsion. An emulsifier stabilises an emulsion by lowering interfacial tension between the liquids.

Teacher's Note: Emulsifier forms a protective film around droplets.

Exam Note: Soap is a common emulsifier.

Question Level 1, 63. Colloidal solution of gold is prepared by:

(a) colloidal mill

(b) double decomposition method

(c) Bredig's method

(d) peptization

Solution. Answer: (c) Bredig's method. Bredig's arc method prepares gold sol by sparking gold electrodes under water.

Teacher's Note: Metal sols come from Bredig's arc.

Exam Note: Bredig arc: Au, Pt, Ag, Cu.

Question Level 1, 64. The formation of colloid from suspension is:

(a) peptisation

(b) condensation

(c) sedimentation

(d) fragmentation

Solution. Answer: (a) peptisation. Breaking suspended aggregates into colloidal particles with a peptizing agent is peptization.

Teacher's Note: Suspension or precipitate to colloid is peptization.

Exam Note: Peptization needs a peptizing agent.

Question Level 1, 65. The method usually employed for the destruction of a colloidal solution is:

(a) dialysis

(b) addition of electrolytes

(c) diffusion through animal membrane

(d) condensation

Solution. Answer: (b) addition of electrolytes. Adding an electrolyte neutralises the charge and coagulates (destroys) the sol.

Teacher's Note: Neutralise the charge to destroy a sol.

Exam Note: Coagulation destroys a sol.

Question Level 1, 66. Which of the following has minimum flocculation value for positively charged sol?

(a) Cl-

(b) SO42-

(c) PO43-

(d) [Fe(CN)6]4-

Solution. Answer: (d) [Fe(CN)6]4-. For a positive sol the anion of highest charge, [Fe(CN)6]4-, has the lowest flocculation value.

Teacher's Note: Highest negative charge gives lowest flocculation value.

Exam Note: Greater charge, smaller coagulation value.

Question Level 1, 67. Which of the following will have the highest coagulating power for Fe(OH)3 colloid?

(a) PO43-

(b) SO42-

(c) Ca2+

(d) Al3+

Solution. Answer: (a) PO43-. Fe(OH)3 is a positive sol, so anions coagulate it; PO43- carries the greatest negative charge.

Teacher's Note: Positive sol needs the highest-charge anion.

Exam Note: Cations cannot coagulate a positive sol.

Question Level 1, 68. Artificial rain is caused by spraying:

(a) Opposite charged collidal dust over a cloud

(b) Same charged collidal dust over a cloud

(c) Both

(d) None of these

Solution. Answer: (a) Opposite charged collidal dust over a cloud. Oppositely charged dust neutralises the charge on cloud droplets, coagulating them into rain.

Teacher's Note: Opposite charge coagulates cloud droplets.

Exam Note: Cloud seeding uses charged dust.

Question Level 1, 69. Colloids can be purified by:

(a) condensation

(b) peptization

(c) coagulation

(d) dialysis

Solution. Answer: (d) dialysis. Dialysis removes dissolved electrolytes through a membrane that colloidal particles cannot cross.

Teacher's Note: Parchment lets ions pass but holds colloid particles.

Exam Note: Dialysis purifies sols.

Question Level 1, 70. Dialysis can seperate, which of the following in addition to the glucose from the human blood?

(a) Sucrose

(b) Fructose

(c) Alcohol

(d) Proteins

Solution. Answer: (a) Sucrose. Answer as printed in the key (small crystalloid molecules pass through the dialysis membrane, whereas proteins, being colloidal, are retained).

Teacher's Note: Small molecules cross the membrane; proteins do not.

Exam Note: Dialysis separates crystalloids from colloids.

Question Level 1, 71. Protective sols are:

(a) lyophilic

(b) lyophobic

(c) both (a) and (b)

(d) none of these

Solution. Answer: (a) lyophilic. Lyophilic sols act as protective colloids because they form a protective layer around lyophobic particles.

Teacher's Note: Protective colloids are lyophilic.

Exam Note: Link gold number to protection.

Question Level 1, 72. Electro-osmosis is observed when:

(a) dispersion medium particles begins to move in an electric field

(b) dispersed phase begins to move in an electric field

(c) both (a) and (b)

(d) none of the above

Solution. Answer: (a) dispersion medium particles begins to move in an electric field. In electro-osmosis the dispersion medium moves in the electric field while the dispersed phase is held fixed.

Teacher's Note: Medium moves, particles are held back.

Exam Note: Contrast with electrophoresis.

Question Level 1, 73. On adding AgNO3 solution into KI solution, a negatively charged colloidal sol is obtained when they are in:

(a) 50 mL of 0.1 M AgNO3 + 50 mL of 0.1 M KI

(b) 50 mL of 0.1 M AgNO3 + 50 mL of 0.2 M KI

(c) 50 mL of 0.2 M AgNO3 + 50 mL of 0.1 M KI

(d) None of these

Solution. Answer: (b) 50 mL of 0.1 M AgNO3 + 50 mL of 0.2 M KI. In (b) 5 mmol AgNO3 reacts with 10 mmol KI leaving 5 mmol excess I-, adsorbed on AgI to give a negative sol. In (a) there is no excess and in (c) excess Ag+ gives a positive sol.

Teacher's Note: Negative sol needs excess iodide after precipitation.

Exam Note: Compare moles of Ag+ and I-.

Question Level 1, 74. A sol is prepared by addition of excess of AgNO3 solution in KI solution. The charge likely to develop on colloidal particles is:

(a) positive

(b) negative

(c) no charge

(d) both charges

Solution. Answer: (a) positive. Excess AgNO3 leaves Ag+, adsorbed on AgI, so the sol is positively charged.

Teacher's Note: Sol adsorbs the ion present in excess.

Exam Note: Excess Ag+ gives positive AgI sol.

Question Level 1, 75. The gold numbers of protective colloids A, B, C and D are 0.04, 0.004, 10 and 40 respectively. The protective powers of A, B, C and D are in the order:

(a) A > B > C > D

(b) B > A > C > D

(c) D > C > A > B

(d) D > C > B > A

Solution. Answer: (b) B > A > C > D. Smaller gold number means greater protective power: B (0.004) > A (0.04) > C (10) > D (40).

Teacher's Note: Protective power varies inversely with gold number.

Exam Note: Smaller gold number, stronger protection.

Question Level 1, 76. In Brownian motion, the paths of the particles are:

(a) linear

(b) curved

(c) zig-zag

(d) uncertain

Solution. Answer: (c) zig-zag. Colloidal particles move in random zig-zag paths due to collisions with medium molecules.

Teacher's Note: Random collisions produce zig-zag motion.

Exam Note: Brownian motion is zig-zag.

Question Level 1, 77. Which one of the following is not represented by sols?

(a) Adsorption

(b) Tyndall effect

(c) Flocculation

(d) Paramagnetism

Solution. Answer: (d) Paramagnetism. Sols show adsorption, Tyndall effect and flocculation; paramagnetism is not a sol property.

Teacher's Note: Paramagnetism concerns unpaired electrons, not colloids.

Exam Note: Sol properties: Tyndall, Brownian, adsorption.

Question Level 1, 78. The Tyndall effect associated with colloidal particles is due to:

(a) presence of electrical charges

(b) scattering of light

(c) absorption of light

(d) reflection of light

Solution. Answer: (b) scattering of light. Colloidal particles scatter light, making the beam path visible.

Teacher's Note: Scattering makes the light path visible.

Exam Note: Tyndall effect is scattering.

Question Level 1, 79. Blue colour of the sky is due to:

(a) absorption of light by dust particles

(b) reflection of light by dust particles

(c) scattering of light by dust particles

(d) presence of clouds

Solution. Answer: (c) scattering of light by dust particles. Dust particles scatter shorter (blue) wavelengths more strongly.

Teacher's Note: Short wavelengths scatter most.

Exam Note: Blue sky: scattering.

Question Level 1, 80. The apparatus used to coagulate carbon particles from smoke is called:

(a) cottrel smoker

(b) cottrell precipitator

(c) cottrell absorber

(d) none of these

Solution. Answer: (b) cottrell precipitator. The Cottrell precipitator removes charged smoke particles by electrical precipitation.

Teacher's Note: Charged plates neutralise smoke particles.

Exam Note: Cottrell precipitator: smoke removal.

Level 2

Question Level 2, 1. Select correct adsorption isobars for chemisorption and physisorption respectively (where x/m = extent of adsorption, T = temperature). [Each option is a pair of graphs of x/m against T: (a) both curves fall steeply then flatten with rising T; (b) both curves rise to a maximum then fall; (c) first graph rises to a maximum then falls, second graph falls steadily; (d) both curves rise and level off.]

(a) (a)

(b) (b)

(c) (c)

(d) (d)

Solution. Answer: (c) (c). Physisorption is exothermic and reversible, so x/m falls steadily as T rises. Chemisorption needs activation energy, so x/m first rises with T and then falls (bell-shaped isobar). This is pair (c).

Teacher's Note: Chemisorption isobar has a peak; physisorption falls steadily with T.

Exam Note: Sketch both isobars.

Question Level 2, 2. Which among the following statements is false?

(a) Increase of pressure increases the amount of adsorption

(b) Increase of temperature may decrease the amount of adsorption

(c) Adsorption may be monolayered or multilayered

(d) Particle size of the adsorbent will not affect the amount of adsorption

Solution. Answer: (d) Particle size of the adsorbent will not affect the amount of adsorption. Smaller particle size gives larger surface area and so more adsorption; hence (d) is false.

Teacher's Note: Smaller particles give larger surface area and more adsorption.

Exam Note: Surface area controls adsorption extent.

Question Level 2, 3. Select incorrect statement:

(a) Lyophilic sols are reversible

(b) Lyophobic sols are self stabilized

(c) Lyophobic sols are obtained from inorganic materials

(d) Lyophobic sols particles are hydrated

Solution. Answer: (d) Lyophobic sols particles are hydrated. Lyophobic particles have little affinity for the medium and are not solvated, so (d) is incorrect.

Teacher's Note: Lyophilic particles are solvated; lyophobic are not.

Exam Note: Contrast solvation in the two types.

Question Level 2, 4. Which one of the following statements is not correct in respect of lyophilic sols?

(a) There is a considerable interaction between the dispersed phase and dispersion medium

(b) These are quite stable and are not easily coagulated

(c) They carry charge

(d) The particles are hydrated

Solution. Answer: (c) They carry charge. Lyophilic particles carry no or very little charge; their stability comes from solvation, so (c) is not correct.

Teacher's Note: Lyophilic stability is from solvation, not charge.

Exam Note: Lyophilic: little charge, much solvation.

Question Level 2, 5. Alums purify muddy water by:

(a) dialysis

(b) absorption

(c) coagulation

(d) ultrafiltration

Solution. Answer: (c) coagulation. Al3+ from alum coagulates the negatively charged clay particles, which settle down.

Teacher's Note: Al3+ neutralises charged clay particles and coagulates them.

Exam Note: Alum: coagulation of clay sol.

Question Level 2, 6. Lyophilic sols are more stable than lyophobic sols because:

(a) the colloidal particles have positive charge

(b) the colloidal particles have negative charge

(c) the colloidal particles are solvated

(d) there is strong electrostatic repulsion between the colloidal particles

Solution. Answer: (c) the colloidal particles are solvated. Lyophilic particles are strongly solvated, and this solvation sheath gives them stability.

Teacher's Note: Solvation gives lyophilic stability.

Exam Note: Link stability to solvation.

Question Level 2, 7. Arrange the following electrolytes in the increasing order of coagulation power for the coagulation of As2S3 sol: K2SO4 (I), CaCl2 (II), Na3PO4 (III), AlCl3 (IV)

(a) I < II < III < IV

(b) I = III < II < IV

(c) II < IV < I < II

(d) II < III < IV < I

Solution. Answer: (b) I = III < II < IV. As2S3 is a negative sol, so the cation decides: K+ (I) and Na+ (III) are both monovalent and equal, Ca2+ (II) is divalent, Al3+ (IV) is trivalent. Order: I = III < II < IV.

Teacher's Note: Negative sol: compare cation charges only.

Exam Note: Count cation charge, ignore anions.

Question Level 2, 8. Equal volume each of two sols of AgI, one obtained by adding AgNO3 to slight excess of KI and another obtained by adding KI to slight excess of AgNO3, are mixed together. Then:

(a) the two sols will stabilize each other

(b) the sol particles will acquire more electric charge

(c) the sols will coagulate each other mutually

(d) a true solution will be obtained

Solution. Answer: (c) the sols will coagulate each other mutually. The sols carry opposite charges (negative with excess I-, positive with excess Ag+), so they neutralise each other and coagulate mutually.

Teacher's Note: Oppositely charged sols neutralise and precipitate.

Exam Note: Mutual coagulation needs opposite charges.

Question Level 2, 9. Which of the following statements is not true about the oil-in-water type emulsion?

(a) Addition of small amount of water, no separate layer of water is formed

(b) Addition of small amount of oil soluble dye renders the entire emulsion coloured

(c) Addition of oil results in the formation of two layers

(d) Addition of a small amount of an electrolyte increases the conductivity of the emulsion

Solution. Answer: (b) Addition of small amount of oil soluble dye renders the entire emulsion coloured. In an O/W emulsion the dye dissolves only in the oil droplets, so the entire emulsion is not coloured; statement (b) is not true.

Teacher's Note: Oil-soluble dye colours only the dispersed oil droplets.

Exam Note: Dye test identifies emulsion type.

Question Level 2, 10. Under the influence of an electric field, the particles in a sol migrate towards cathode. The coagulation of the same sol is studied using NaCl, Na2SO4 and Na3PO4 solutions. Their coagulating values will be in maximum for:

(a) NaCl

(b) Na2SO4

(c) Na3PO4

(d) same for all

Solution. Answer: (a) NaCl. Particles migrate to the cathode, so the sol is positive and anions are effective in coagulation. The greater the valence of the effective ion, the smaller its coagulation value, so NaCl (Cl-) has the maximum coagulation value.

Teacher's Note: Positive sol: anion valency decides; Cl- weakest.

Exam Note: Smaller valency, larger coagulation value.

Question Level 2, 11. Select incorrect statement:

(a) Micelles are macromolecular colloids

(b) The electrical charge on a colloid particle is indicated by electrophoresis

(c) Formation of micelles takes place above kraft temperature

(d) Formation of micelles takes place below CMC

Solution. Answer: (d) Formation of micelles takes place below CMC. Micelles form only above the CMC (and above the Kraft temperature), so (d) is incorrect. Answer as printed in the key; note that (a) is also doubtful because micelles are associated colloids, not macromolecular colloids.

Teacher's Note: Micelles form above both Kraft temperature and CMC.

Exam Note: Know CMC and Kraft temperature meaning.

Question Level 2, 12. Bredig's arc method involves:

(a) dispersion of metal

(b) condensation of metal

(c) dispersion as well as condensation

(d) neither dispersion nor condensation

Solution. Answer: (c) dispersion as well as condensation. In Bredig's arc method the metal is first vaporised (dispersion) and the vapour then condenses to colloidal particles, so it involves both.

Teacher's Note: Arc vaporises metal; vapour condenses into colloid.

Exam Note: Bredig arc: dispersion plus condensation.

Question Level 2, 13. A freshly prepared Fe(OH)3 precipitate is peptized by adding FeCl3 solution. The charge on the colloidal particle is due to preferential adsorption of:

(a) Cl- ions

(b) Fe3+ ions

(c) OH- ions

(d) none of these

Solution. Answer: (b) Fe3+ ions. The precipitate adsorbs the common ion Fe3+ from FeCl3, making the sol positively charged.

Teacher's Note: Peptizing agent supplies the common ion that is adsorbed.

Exam Note: Fe(OH)3 sol is positive.

Question Level 2, 14. Select incorrect statement:

(a) Gold sol is multimolecular colloid

(b) Large number of atoms of a substance aggregate together and formed multimolecular colloids

(c) Metal sulphides are lyophobic colloids

(d) Sulphur sol is multimolecular colloid and hydrophilic in nature

Solution. Answer: (d) Sulphur sol is multimolecular colloid and hydrophilic in nature. Sulphur sol is a multimolecular colloid but it is hydrophobic (lyophobic), so (d) is incorrect.

Teacher's Note: Sulphur sol is multimolecular and lyophobic.

Exam Note: Do not confuse sulphur sol with lyophilic sols.

Question Level 2, 15. Associated colloids:

(a) raise both the surface tension and viscosity of water

(b) lower both the surface tension and viscosity of water

(c) lower the surface tension and raise the viscosity of water

(d) have greater concentration at the surface layer than the bulk of the solution

Solution. Answer: (c) lower the surface tension and raise the viscosity of water. Associated colloids (surfactants) lower the surface tension and raise the viscosity of water.

Teacher's Note: Surfactants lower surface tension; micelles raise viscosity.

Exam Note: Soap effect on water properties.

Question Level 2, 16. Below critical micelle concentration (CMC):

(a) the surfactant molecules of ions undergo association to form clusters

(b) the viscosity of solution increases abruptly

(c) substances like grease, fat, etc. dissolve colloidally

(d) salt behave as normal, strong electrolyte

Solution. Answer: (d) salt behave as normal, strong electrolyte. Below the CMC no micelles form, so the surfactant behaves as a normal strong electrolyte.

Teacher's Note: No micelles below CMC.

Exam Note: Micelles appear only at or above CMC.

Question Level 2, 17. During electro-osmosis of Fe(OH)3 sol:

(a) sol particles move towards anode

(b) sol particles move towards cathode

(c) the dispersion medium moves towards anode

(d) the dispersion medium moves towards cathode

Solution. Answer: (c) the dispersion medium moves towards anode. In electro-osmosis the particles are held fixed; the medium moves opposite to the particle charge. Fe(OH)3 particles are positive, so the medium (negative) moves towards the anode.

Teacher's Note: Medium carries charge opposite to the sol particles.

Exam Note: Fe(OH)3 sol positive, medium to anode.

Question Level 2, 18. Select incorrect statement:

(a) Soap and detergent lower the interfacial surface tension between oil and water

(b) Basic principle of peptization is reverse of coagulation

(c) Soap and detergent used as emulsifiers

(d) Lyophilic sols need stabilizing agent

Solution. Answer: (d) Lyophilic sols need stabilizing agent. Lyophilic sols are already stable through solvation and need no stabilising agent, so (d) is incorrect.

Teacher's Note: Lyophilic sols are self-stabilised by solvation.

Exam Note: Lyophobic sols need stabilisers.

Question Level 2, 19. Smoke precipitator works on the principle of:

(a) centrifugation

(b) neutralization of charge on colloids

(c) absorption

(d) addition of electrolytes

Solution. Answer: (b) neutralization of charge on colloids. The Cottrell precipitator neutralises the charge on smoke particles, which then settle.

Teacher's Note: Charged electrodes neutralise smoke particle charge.

Exam Note: Cottrell: neutralisation of charge.

Question Level 2, 20. What is the correct sequence of the increasing coagulation value of the following electrolyte for the coagulation of ferric hydroxide solution? (I) Na3PO4 (II) KCl (III) K2SO4 (IV) K4[Fe(CN)6]

(a) IV > I > III > II

(b) II > III > I > IV

(c) I > II > III > IV

(d) IV > III > II > I

Solution. Answer: (b) II > III > I > IV. Fe(OH)3 is positive, so anions coagulate it; higher anion charge gives a lower coagulation value. Coagulation value therefore falls as II (Cl-) > III (SO42-) > I (PO43-) > IV ([Fe(CN)6]4-), matching option (b).

Teacher's Note: Positive sol: coagulation value falls as anion charge rises.

Exam Note: Rank anions by charge.

Question Level 2, 21. Which of the following is true in respect of chemical adsorption?

(a) ΔH < 0, ΔS > 0, ΔG > 0

(b) ΔH < 0, ΔS < 0, ΔG < 0

(c) ΔH > 0, ΔS > 0, ΔG < 0

(d) ΔH > 0, ΔS < 0, ΔG > 0

Solution. Answer: (b) ΔH < 0, ΔS < 0, ΔG < 0. Adsorption is exothermic (ΔH < 0), the gas loses freedom (ΔS < 0) and the process is spontaneous (ΔG < 0).

Teacher's Note: Exothermic, entropy falls, yet spontaneous.

Exam Note: Adsorption: ΔH, ΔS, ΔG all negative.

Question Level 2, 22. For the graph below, select correct order of temperature? [Graph: three adsorption isotherms of extent of adsorption (x/M) against pressure P, all rising towards a saturation pressure Ps; the top curve is labelled T3, the middle T2, the bottom T1.]

(a) T1 > T2 > T3

(b) T2 > T3 > T1

(c) T3 > T2 > T1

(d) T1 = T2 = T3

Solution. Answer: (a) T1 > T2 > T3. Adsorption is exothermic, so the extent of adsorption falls as temperature rises. The lowest curve is T1 (highest temperature), so T1 > T2 > T3.

Teacher's Note: Higher temperature gives lower isotherm for physisorption.

Exam Note: Lower curve means higher temperature.

Question Level 2, 23. Although nitrogen does not adsorb on a surface at room temperature, it adsorbs on the surface at 83 K. Which one of the following statements is correct?

(a) At 83 K, there is formation of monolayer

(b) At 83 K, nitrogen is adsorbed as atoms

(c) At 83 K, nitrogen molecules are held by chemical bonds

(d) At 83 K, there is formation of multimolecular layers

Solution. Answer: (d) At 83 K, there is formation of multimolecular layers. At 83 K nitrogen adsorbs by physisorption, which at low temperature forms multimolecular layers.

Teacher's Note: Low temperature favours physisorption in multilayers.

Exam Note: Physisorption: multilayer at low T.

Question Level 2, 24. For the coagulation of 50 ml of ferric hydroxide sol, 10 ml of 0.5 M KCl is required. What is the coagulation value of KCl?

(a) 5

(b) 10

(c) 100

(d) None of these

Solution. Answer: (c) 100. Coagulation value = millimoles of electrolyte per litre of sol = (10 × 0.5 / 50) × 1000 = 100.

Teacher's Note: Coagulation value is millimoles of electrolyte per litre of sol.

Exam Note: Convert mL and molarity to mmol per litre.

Question Level 2, 25. 100 mL of 0.6 M acetic acid is shaken with 2 g activated carbon. The final concentration of the solution after adsorption is 0.5 M. What is the amount of acetic acid adsorbed per gram of carbon?

(a) 0.6 g

(b) 0.3 g

(c) 1.2 g

(d) None of these

Solution. Answer: (b) 0.3 g. Moles adsorbed = 0.100 × (0.6 − 0.5) = 0.01 mol; mass = 0.01 × 60 = 0.6 g on 2 g carbon, so x/m = 0.6/2 = 0.3 g per gram.

Teacher's Note: Find moles lost from solution, convert to grams, divide by carbon mass.

Exam Note: Do not forget to divide by 2 g.

Question Level 2, 26. A detergent (C12H25SO4-Na+) solution becomes a colloidal sol at a concentration of 10-3 M. On an average 1013 colloidal particles are present in 1 mm3. What is the average number of ions are contain in one colloidal particle (micelle)? [Given: NA = 6 × 1023]

(a) 6 × 107

(b) 10

(c) 60

(d) None of these

Solution. Answer: (c) 60. Number of detergent ions in 1 L = 10-3 × 6 × 1023 = 6 × 1020. Since 1 L = 106 mm3, ions per mm3 = 6 × 1014. Ions per colloidal particle = 6 × 1014 / 1013 = 60.

Teacher's Note: Convert litre to mm3 (106) before dividing by particles per mm3.

Exam Note: Unit conversion is the trap.

Question Level 2, 27. One gram of activated carbon has a surface area of 1000 m2. Considering complete coverage as well as monomolecular adsorption, how much ammonia at 1 atm and 273 K would be adsorbed on the surface of 44/7 g carbon if radius of ammonia molecules is 10-8 cm. [Given: NA = 6 × 1023]

(a) 7.46 L

(b) 0.33 L

(c) 44.8 L

(d) 23.5 L

Solution. Answer: (a) 7.46 L. Total surface area = (44/7) × 107 cm2. Area of one NH3 molecule = πr2 = (22/7) × 10-16 cm2. Number of molecules = [(44/7) × 107] / [(22/7) × 10-16] = 2 × 1023. Volume at STP = (2 × 1023 / 6 × 1023) × 22.4 = 7.46 L.

Teacher's Note: Cross-section of a molecule is πr2; convert 1000 m2 to cm2.

Exam Note: Convert m2 to cm2 correctly.

Question Level 2, 28. At 1 atm and 273 K the volume of nitrogen gas required to cover a sample of silica gel, assuming Langmuir monolayer adsorption, is found to be 1.30 cm3 g-1 of the gel. The area occupied by a nitrogen molecule is 0.16 nm2. What is the surface area per gram of silica gel? [Given: NA = 6 × 1023]

(a) 5.568 m2 g-1

(b) 3.48 m2 g-1

(c) 1.6 m2 g-1

(d) None of these

Solution. Answer: (a) 5.568 m2 g-1. Molecules per gram = (6 × 1023 / 22400) × 1.30 = 3.48 × 1019. Area of one molecule = 0.16 nm2 = 1.6 × 10-19 m2. Surface area = 3.48 × 1019 × 1.6 × 10-19 = 5.568 m2 g-1.

Teacher's Note: Moles from volume at STP, then molecules, then times molecular area.

Exam Note: 1 nm2 = 10-18 m2.

Question Level 2, 29. 10% sites of catalyst bed have adsorbed H2. On heating H2 gas is evolved from sites and collected at 0.03 atm and 300 K in a small vessel of 2.46 cm3. No. of sites available is 5.4 × 1016 per cm2 and surface area is 1000 cm2. Find out the no. of surface sites occupied per molecule of H2. (Given NA = 6 × 1023)

(a) 1

(b) 2

(c) 3

(d) None of these

Solution. Answer: (c) 3. Moles of H2 = (0.03 × 2.46 × 10-3) / (0.0821 × 300) = 3 × 10-6, so molecules = 3 × 10-6 × 6 × 1023 = 18 × 1017. Total sites = 5.4 × 1016 × 1000 = 5.4 × 1019; occupied sites = 10% of this = 5.4 × 1018. Sites per molecule = 5.4 × 1018 / 18 × 1017 = 3.

Teacher's Note: Find molecules from PV = nRT, then divide occupied sites by molecules.

Exam Note: Use litres: 2.46 cm3 = 2.46 × 10-3 L.

Question Level 2, 30. A sample of 16 g charcoal was brought into contact with CH4 gas contained in a vessel of 1 litre at 27°C. The pressure of gas was found to fall from 760 to 608 torr. The density of charcoal sample is 1.6 g/cm3. What is the volume of the CH4 gas adsorbed per gram of the adsorbent at 608 torr and 27°C?

(a) 125 mL/g

(b) 16.25 mL/g

(c) 26 mL/g

(d) None of these

Solution. Answer: (b) 16.25 mL/g. Volume the initial gas would occupy at 608 torr: V2 = P1V1/P2 = 760 × 1/608 = 1.25 L = 1250 mL. Volume occupied by gas = 1000 − (16/1.6) = 990 mL. Volume adsorbed = 1250 − 990 = 260 mL, which per gram of charcoal = 260/16 = 16.25 mL/g at 608 torr and 27°C.

Teacher's Note: Charcoal itself occupies volume: subtract 16/1.6 mL from the vessel.

Exam Note: Do not forget the volume of charcoal.

Level 3 - Passage 1

A graph between x/m and the pressure P of the gas at a constant temperature is called adsorption isotherm, where x is the number of moles of the adsorbate and m is the mass of the adsorbent. Adsorption isotherms of different shapes have been experimentally observed. According to Freundlich adsorption isotherm, x/m = kP1/n, where k and n are constant parameters depending upon the nature of the solid and gas.

Question Level 3, Passage 1, 1. In the given isotherm select the incorrect statement: [Graph: x/m against P rising from O through points A and B and levelling off at C near the saturation pressure Ps.]

(a) x/m ∝ P1/n along OA

(b) x/m ∝ P0 when point B is reached

(c) x/m does not increase as rapidly with pressure along BC due to less surface area available for adsorption

(d) nature of isotherm is different for two gases for same adsorbent

Solution. Answer: (b) x/m ∝ P0 when point B is reached. x/m becomes independent of pressure (∝ P0) only at saturation, which is point C and not B; hence (b) is incorrect.

Teacher's Note: Pressure independence begins at saturation (C), not at B.

Exam Note: Freundlich: x/m ∝ P1/n, P0 at saturation.

Question Level 3, Passage 1, 2. Adsorption isotherm of log(x/m) and log P was found of the type shown [Graph: a horizontal straight line, log(x/m) constant for all log P]. This is true when:

(a) P = 0

(b) P = 1

(c) 1/n = 1

(d) 1/n = ∞

Solution. Answer: (c) 1/n = 1. Printed key gives (c). Corrected: a horizontal line of log(x/m) against log P has slope 1/n = 0, that is x/m = k, independent of P (n = ∞). Neither 1/n = 1 nor 1/n = ∞ gives zero slope, so none of the printed options is strictly right; (c) is the book's printed answer. Needs a human check.

Teacher's Note: Slope of log(x/m) vs log P is 1/n; horizontal means zero.

Exam Note: Read slope from the graph.

Question Level 3, Passage 1, 3. Graph between log(x/m) and log P is a straight line at angle 45° with intercept OA as shown [OA = log 2 on the log(x/m) axis]. Hence, (x/m) at a pressure of 2 atm is:

(a) 2

(b) 4

(c) 8

(d) 1

Solution. Answer: (b) 4. Slope = tan 45° = 1 = 1/n, and intercept log k = log 2. So log(x/m) = log 2 + log P. At P = 2: log(x/m) = log 2 + log 2 = log 4, so x/m = 4.

Teacher's Note: Slope 1 gives 1/n = 1; intercept OA = log k = log 2.

Exam Note: Use log(x/m) = log k + (1/n) log P.

Level 3 - Passage 2

The protective power of the lyophilic colloids is expressed in terms of gold number, a term introduced by Zsigmondy. Gold number is the number of milligrams of the lyophilic colloid which prevent the coagulation of 10 mL of red gold sol when 1 mL of a 10 per cent solution of sodium chloride is added to it. Thus, smaller the gold number of lyophilic colloid, the greater is the protective power.

Question Level 3, Passage 2, 1. On addition of one mL of solution of 10% NaCl to 10 mL of red gold sol in presence of 0.025 g of starch, the coagulation is just prevented. The gold number of starch is:

(a) 0.025

(b) 0.25

(c) 2.5

(d) 25

Solution. Answer: (d) 25. Gold number is the mass of protective colloid in milligrams that just prevents coagulation of 10 mL gold sol on adding 1 mL of 10% NaCl. 0.025 g = 25 mg, so the gold number is 25.

Teacher's Note: Convert grams to milligrams: gold number is in mg.

Exam Note: Gold number is in milligrams.

Question Level 3, Passage 2, 2. Which of the following statement(s) is/are correct?

(a) Higher the gold number, more protective power of colloid

(b) Lower the gold number, more the protective power

(c) Higher the coagulation value, more the coagulation power

(d) Lower the coagulation value, higher the coagulation power

Solution. Answer: (b), (d) . Protective power varies inversely with gold number, and coagulating power varies inversely with coagulation value. So (b) and (d) are correct.

Teacher's Note: Both gold number and coagulation value are inverse measures.

Exam Note: Lower value means stronger effect.

Question Level 3, Passage 2, 3. Gold number gives an indication of:

(a) protective nature of colloids

(b) purity of gold in suspension

(c) the charge on a colloidal solution of gold

(d) gram of gold per litre of solution

Solution. Answer: (a) protective nature of colloids. Gold number measures the protective power of a lyophilic colloid.

Teacher's Note: Gold number is a protective-power index, unrelated to gold content.

Exam Note: Define gold number.

Level 3 - Passage 3

Coagulation is the process by which the dispersed phase of a colloid is made to aggregate and thereby separate from the continuous phase. The minimum concentration of an electrolyte in milli-moles per litre of the electrolyte solution which is required to cause coagulation of colloidal sol is called coagulation value. Therefore higher is the coagulating power of effective ion, smaller will be the coagulation value of the electrolyte. Coagulation value is proportional to 1/(coagulating power). The coagulation values of different electrolytes are different. This behaviour can be easily understood by Hardy-Schulze rule which states: "The greater is the valency of the effective ion greater is its precipitating power."

Question Level 3, Passage 3, 1. Which one has the highest coagulating power?

(a) K+

(b) Ca2+

(c) Al3+

(d) Sn4+

Solution. Answer: (d) Sn4+. By the Hardy-Schulze rule coagulating power rises with the valency of the effective ion, so Sn4+ is highest.

Teacher's Note: Higher valency means higher coagulating power.

Exam Note: Rank ions by charge.

Question Level 3, Passage 3, 2. As2S3 sol is negatively charged, capacity to precipitate it is highest in:

(a) K2SO4

(b) Na3PO4

(c) AlCl3

(d) CaCl3

Solution. Answer: (c) AlCl3. The sol is negative, so the cation decides: Al3+ (trivalent) in AlCl3 has the highest coagulating power.

Teacher's Note: Compare cation valency: Al3+ is highest.

Exam Note: Negative sol: look at cation charge.

Question Level 3, Passage 3, 3. The ability of an ion to bring coagulation of a given colloid depends upon:

(a) the sign of its charge

(b) the magnitude of its charge

(c) both magnitude and sign

(d) none of these

Solution. Answer: (c) both magnitude and sign. The ion must carry charge opposite to the sol (sign), and a larger charge coagulates better (magnitude).

Teacher's Note: Both sign and magnitude matter.

Exam Note: State both factors.

Question Level 3, Passage 3, 4. The coagulation of colloidal particles of the sol can be caused by:

(a) heating

(b) adding electrolyte

(c) adding oppositely charged sol

(d) all of these

Solution. Answer: (d) all of these. Heating, adding an electrolyte and mixing with an oppositely charged sol all cause coagulation.

Teacher's Note: Each method removes or neutralises the stabilising charge.

Exam Note: List coagulation methods.

Level 3 - Passage 4

Emulsions are normally prepared by shaking the two components together vigorously although some kind of emulsifying agent usually has to be added to stabilize the product. This emulsifying agent may be a soap or other surfactant (surface active) species or a lyophilic sol that forms a protective film around the dispersed phase. Emulsions broadly classified into two types: (i) Oil in water emulsions (O/W): oil acts as dispersed phase and water acts as dispersion medium. (ii) Water in oil emulsions (W/O): water acts as dispersed phase and oil acts as dispersion medium. Dye test, dilution test may be employed for identification of emulsions.

Question Level 3, Passage 4, 1. Read two statements: (1) Milk is an example of oil in water (O/W) type emulsion. (2) Cold cream is an example of water in oil (W/O) type emulsion.

(a) Only statement 1 is correct

(b) Only statement 2 is correct

(c) Both are correct

(d) None of these

Solution. Answer: (c) Both are correct. Milk is oil dispersed in water (O/W) and cold cream is water dispersed in oil (W/O), so both statements are correct.

Teacher's Note: Milk is O/W; butter and cold cream are W/O.

Exam Note: Give one example of each emulsion type.

Question Level 3, Passage 4, 2. Select correct statement:

(a) Water in oil emulsions are more viscous than the aqueous emulsions

(b) Electrical conductance of aqueous emulsions is less than that of oil emulsions

(c) Deemulsification can be done by soap or detergent

(d) An emulsion can be diluted with H2O then it is oil in water (O/W) type

Solution. Answer: (d) An emulsion can be diluted with H2O then it is oil in water (O/W) type. An emulsion that can be diluted with water has water as the continuous phase, so it is O/W. Soap stabilises (not breaks) emulsions.

Teacher's Note: Dilution test: miscibility with water means O/W.

Exam Note: Use the dilution test.

One or More Answers is/are Correct

Question One or More Correct, 1. Select the correct statement(s):

(a) Physical adsorption is specific in nature

(b) Chemical adsorption highly specific in nature

(c) Physical adsorption is due to free valence of atoms

(d) Chemical adsorption is due to stronger interaction or bond formation

Solution. Answer: (b), (d) . Chemisorption is highly specific and involves bond formation; physisorption is non-specific and due to van der Waals forces, not free valence.

Teacher's Note: Specificity belongs to chemisorption; physisorption is due to van der Waals forces.

Exam Note: Contrast physisorption and chemisorption.

Question One or More Correct, 2. Select the correct statement(s):

(a) Adsorption is a non-spontaneous process

(b) Surface energy decreases during the process of adsorption

(c) Adsorption takes place with decrease of entropy

(d) In general adsorption is exothermic process

Solution. Answer: (b), (c), (d) . Adsorption is spontaneous (ΔG < 0), exothermic, lowers surface energy and decreases entropy. So (b), (c), (d) are correct.

Teacher's Note: ΔG < 0, ΔH < 0, ΔS < 0 for adsorption.

Exam Note: Adsorption is spontaneous.

Question One or More Correct, 3. Select the correct statement(s):

(a) Physisorption is favoured by low temperature

(b) Chemisorption is favoured by very high temperature because the process is endothermic

(c) Chemisorption increases with increase in temperature owing to high activation energy

(d) Oxygen adsorbed by charcoal can be desorbed by lowering pressure and temperature

Solution. Answer: (a), (c) . Physisorption (exothermic) is favoured at low temperature. Chemisorption is exothermic but needs activation energy, so it rises with temperature at first. (b) is wrong because the process is not endothermic, and (d) is wrong because desorption needs raised temperature.

Teacher's Note: Chemisorption rises with T because of activation energy, though exothermic.

Exam Note: Do not call chemisorption endothermic.

Question One or More Correct, 4. If adsorption of a gas on a solid is limited to monolayer formation, then which of the following statements are true?

(a) At low pressures, x/m varies proportionately with p

(b) At moderate pressures, x/m varies less than proportionately with p

(c) At high pressures, x/m becomes independent of p

(d) At high pressures, x/m varies more than proportionately with p

Solution. Answer: (a), (b), (c) . Langmuir: x/m = ap/(1 + bp). At low p it is proportional to p, at moderate p it varies less than proportionally, and at high p it becomes constant. So (a), (b), (c).

Teacher's Note: Use x/m = ap/(1+bp) at low and high p.

Exam Note: Monolayer saturates at high pressure.

Question One or More Correct, 5. Which of the following are multimolecular colloids?

(a) Sulphur sol

(b) Starch

(c) Gold sol

(d) Soap solution

Solution. Answer: (a), (c) . Sulphur and gold sols consist of aggregates of many atoms or small molecules (multimolecular). Starch is macromolecular and soap is an associated colloid.

Teacher's Note: Multimolecular: aggregates of atoms like S8 or Au.

Exam Note: Match type: multimolecular, macromolecular, associated.

Question One or More Correct, 6. Which of the following is not lyophilic?

(a) Gelatin sol

(b) Silver sol

(c) Sulphur sol

(d) As2S3 sol

Solution. Answer: (b), (c), (d) . Gelatin is lyophilic; silver, sulphur and As2S3 sols are lyophobic, so (b), (c), (d) are not lyophilic.

Teacher's Note: Metal, sulphur and sulphide sols are lyophobic.

Exam Note: Gelatin, starch, gum are lyophilic.

Question One or More Correct, 7. Which of the following is/are correct for lyophilic sols?

(a) Its surface tension is lower than that of water

(b) Its viscosity is higher than that of water

(c) Its surface tension is higher than that of water

(d) Its viscosity is equal to that of water

Solution. Answer: (a), (b) . Lyophilic sols have lower surface tension and higher viscosity than water.

Teacher's Note: Lyophilic: lower surface tension, higher viscosity.

Exam Note: Compare with water.

Question One or More Correct, 8. Select the correct statement(s):

(a) Benzene is dispersed phase in benzosols

(b) Lyophobic sols are irreversible and not so stable

(c) Lyophobic sol can be produce by double decomposition

(d) When a solution of sulphur in alcohol is added in excess of water a sol of alcohol is formed

Solution. Answer: (b), (c) . In benzosols benzene is the dispersion medium; sulphur sol (not alcohol sol) forms in the last case. Lyophobic sols are irreversible, less stable and can be made by double decomposition.

Teacher's Note: Benzosol: benzene is the medium.

Exam Note: Identify the dispersed phase carefully.

Question One or More Correct, 9. When negatively charged colloid like As2S3 sol is added to positively charged Fe(OH)3 sol in stoichiometric amounts?

(a) Both the sols are precipitated simultaneously

(b) This process is called mutual coagulation

(c) They becomes positively charged colloid

(d) They become negatively charged colloid

Solution. Answer: (a), (b) . Oppositely charged sols in equivalent amounts neutralise each other and precipitate together (mutual coagulation).

Teacher's Note: Equal and opposite charges cancel, so both precipitate.

Exam Note: Mutual coagulation needs stoichiometric amounts.

Question One or More Correct, 10. Colloidal gold can be prepared by:

(a) Bredig's arc method

(b) reduction of AuCl3

(c) hydrolysis

(d) peptization

Solution. Answer: (a), (b) . Gold sol is made electrically by Bredig's arc or chemically by reducing AuCl3.

Teacher's Note: Both dispersion and reduction methods give gold sol.

Exam Note: Name two methods for gold sol.

Question One or More Correct, 11. The coagulation of sol particles may be brought about by:

(a) boiling

(b) persistent dialysis

(c) adding electrolyte

(d) adding oppositely charged sol

Solution. Answer: (a), (b), (c), (d) . Boiling, persistent dialysis, electrolytes and oppositely charged sols all remove or neutralise the stabilising charge, so all four coagulate a sol.

Teacher's Note: Each method removes or neutralises the stabilising charge.

Exam Note: List all coagulation methods.

Question One or More Correct, 12. Select the correct statement(s):

(a) A solution is prepared by addition of excess of AgNO3 solution in KI solution. The charge likely to develop on colloidal particle is positive

(b) The effects of pressure on physical adsorption is high if temperature is low

(c) Ultra centrifugation process is used for preparation of lyophobic colloids

(d) Gold number is the index for extent of gold plating done

Solution. Answer: (a), (b) . Excess Ag+ is adsorbed on AgI giving a positive sol, and pressure affects physisorption strongly at low temperature. Ultracentrifugation is for separation, and gold number measures protective power, so (c) and (d) are wrong.

Teacher's Note: Excess Ag+ means positive AgI sol.

Exam Note: Gold number is a protective-power index.

Question One or More Correct, 13. Colloidal solution can be purified by:

(a) dialysis

(b) electrodialysis

(c) electrophoresis

(d) ultrafiltration

Solution. Answer: (a), (b), (d) . Dialysis, electrodialysis and ultrafiltration remove dissolved ions from sols. Electrophoresis is a charge-detection method.

Teacher's Note: Purification removes electrolytes; electrophoresis does not.

Exam Note: Name three purification methods.

Question One or More Correct, 14. Coagulation of colloids can be achieved by:

(a) centrifugation

(b) adding electrolyte

(c) change in pH

(d) adding water

Solution. Answer: (a), (b), (c) . Centrifugation, electrolytes and change in pH can coagulate a sol; adding water only dilutes it.

Teacher's Note: pH change alters the charge on particles.

Exam Note: Dilution does not coagulate.

Question One or More Correct, 15. Which are the properties of sols?

(a) Adsorption

(b) Tyndall effect

(c) Flocculation

(d) Depression of freezing point

Solution. Answer: (a), (b), (c), (d) . Sols adsorb ions, scatter light (Tyndall effect), flocculate with electrolytes and show a (small) depression of freezing point as a colligative property.

Teacher's Note: Sols show all colligative and surface effects, though small.

Exam Note: List sol properties.

Question One or More Correct, 16. In the aqueous solution of soaps above CMC:

(a) the cations associate to form the aggregates

(b) the anions associate to form the clusters of colloidal dimension

(c) the polar ends of the ions forming the clusters are directed towards water

(d) the non-polar (hydrocarbon) ends are directed towards water

Solution. Answer: (b), (c) . Above CMC the soap anions aggregate to micelles, with polar (carboxylate) heads towards water and hydrocarbon tails inside.

Teacher's Note: Heads face water; tails cluster inward.

Exam Note: Describe micelle structure.

Question One or More Correct, 17. Amongst the following which is/are correct statement about the metal sulphide sols?

(a) The sol particles are positively charged due to preferential adsorption of metal ions

(b) The sol particles are negatively charged due to preferential adsorption of sulphide ions

(c) The cations of added electrolytes are effective in causing the coagulation of the sol

(d) The sol is unstabilized due to both the electric charge and hydration of the particles

Solution. Answer: (b), (c) . Metal sulphide sols are negative (adsorb S2-), so cations coagulate them. They are lyophobic and not stabilised by hydration.

Teacher's Note: Negative sulphide sol is coagulated by cations.

Exam Note: Metal sulphide sols are negative.

Question One or More Correct, 18. Emulsion can be destroyed by:

(a) the addition of an emulsifier

(b) electrophoresis with a high potential

(c) freezing

(d) all of these

Solution. Answer: (b), (c) . Adding an emulsifier stabilises an emulsion; electrophoresis at high potential and freezing break it.

Teacher's Note: Emulsifiers stabilise; freezing and high potential destroy.

Exam Note: Know demulsification methods.

Question One or More Correct, 19. Which of the following statement is/are correct for electrophoresis?

(a) Colloids are uncharged particles and do not migrate towards the electrodes when electric field is applied

(b) In electrophoresis, solution migrates either to the anode or to the cathode depending on the positively or negatively charged solution

(c) Electrophoresis is useful for finding the charge on a sol

(d) All of these

Solution. Answer: (c) Electrophoresis is useful for finding the charge on a sol. Colloidal particles are charged and migrate to an electrode; the dispersed particles (not the solution) migrate. Electrophoresis therefore shows the charge on a sol.

Teacher's Note: Particles, not the medium, migrate in electrophoresis.

Exam Note: Electrophoresis gives sign of charge.

Question One or More Correct, 20. Select the false statement(s):

(a) Brownian motion and Tyndall effect are shown by true solutions

(b) Sorption process is combinations of adsorption and absorption process

(c) Hardy-Schulze law is related with coagulation of a sol

(d) Higher is the gold number greater will be the protective power of a lyophilic colloid

Solution. Answer: (a), (d) . True solutions do not show Brownian motion or Tyndall effect, and a higher gold number means lower protective power. So (a) and (d) are false.

Teacher's Note: Gold number and protective power are inverse.

Exam Note: Tyndall effect needs colloidal particles.

Question One or More Correct, 21. Select correct statement(s)

(a) Lyophobic colloids are used to protect lyophilic colloids

(b) Dehydrating agent is used to coagulate lyophilic sols

(c) Rubber is obtained by coagulation of latex

(d) Sometimes, the rainfall occurs when two oppositely charged clouds meet

Solution. Answer: (b), (c), (d) . Lyophilic colloids protect lyophobic ones (not the reverse). Dehydrating agents coagulate lyophilic sols, rubber comes from coagulated latex and rain can fall when oppositely charged clouds meet.

Teacher's Note: Protection goes lyophilic to lyophobic.

Exam Note: Coagulation applications.

Question One or More Correct, 22. In which of the followings, Tyndall effect is/are not observed?

(a) Sugar solution

(b) Emulsions

(c) Urea solution

(d) Solution of proteins

Solution. Answer: (a), (c) . Sugar and urea form true solutions, so there is no Tyndall effect; emulsions and protein solutions are colloids.

Teacher's Note: True solutions do not scatter light.

Exam Note: Tyndall effect needs colloids.

Question One or More Correct, 23. Which of the following reactions are examples for heterogeneous catalysis?

(a) 2H2O2(l) → 2H2O(l) + O2(g) (catalyst MnO2(s))

(b) 2SO2(g) + O2(g) → 2SO3(g) (catalyst NO(g))

(c) H2(g) + C2H4(g) → CH3COOH(aq) + C2H5OH(aq) (catalyst Ni(s))

(d) CH3COOC2H5(aq) + H2O(l) → CH3COOH(aq) + C2H5OH(aq) (catalyst HCl(aq))

Solution. Answer: (a), (c) . Heterogeneous catalysis has the catalyst in a different phase: MnO2(s) with liquid H2O2, and Ni(s) with gases. NO(g) with gases and HCl(aq) with aqueous ester are homogeneous.

Teacher's Note: Compare phase of catalyst with phase of reactants.

Exam Note: Same phase means homogeneous.

Question One or More Correct, 24. Select correct statement(s)

(a) The role of a catalyst in a reversible reaction is to allow the equilibrium to be achieved quickly

(b) Diffusion process is involved in mechanism of heterogeneous catalysis process

(c) Hydrolysis of cane sugar is catalysed by H+

(d) Promotors enhance the activity of a catalyst

Solution. Answer: (a), (b), (c), (d) . All four are correct: a catalyst only speeds up reaching equilibrium; diffusion of reactants and products is a step in heterogeneous catalysis; H+ catalyses inversion of cane sugar; promoters raise catalyst activity.

Teacher's Note: Catalyst changes rate, not equilibrium position.

Exam Note: A catalyst does not shift equilibrium.

Question One or More Correct, 25. Select correct statement(s)

(a) Blood is a colloidal solution

(b) Alum is used in water purification

(c) River water is a colloidal solution of clay

(d) Colloidal medicines are more effective due to large surface area

Solution. Answer: (a), (b), (c), (d) . Blood is a colloidal solution; alum coagulates clay in water purification; river water carries colloidal clay; colloidal medicines have large surface area. All four are correct.

Teacher's Note: Large surface area makes colloidal medicines effective.

Exam Note: Know everyday colloids.

Match the Column

Match Column-I with Column-II; one or more entries of Column-I may match the same entries of Column-II.

Question Match the Column, 1. Match Column-I with Column-II (one or more entries of Column-I may match the same entries of Column-II). Column-I: (A) Chemisorption, (B) Physical adsorption, (C) Desorption, (D) Activation of adsorbent. Column-II: (P) Exothermic, (Q) Endothermic, (R) Removal of adsorbed material, (S) Highly specific in nature.

Solution. Answer (from key): A → P,S; B → P; C → Q,R; D → Q. Chemisorption is exothermic and highly specific; physical adsorption is exothermic; desorption is endothermic and removes the adsorbed material; activation of the adsorbent (answer as printed) is matched with endothermic.

Teacher's Note: Desorption needs heat, so endothermic.

Exam Note: Reverse of an exothermic process.

Question Match the Column, 2. Match: Column-I: (A) Chemisorption, (B) Physisorption, (C) Desorption of a solute on liquid surface, (D) Adsorption of a solute on a liquid surface. Column-II: (P) Not very specific and decreases with temperature, (Q) Specific and increases with temperature, (R) Increases the surface tension of the liquid, (S) Decreases the surface tension of the liquid.

Solution. Answer (from key): A → Q; B → P; C → R; D → S. Chemisorption is specific and rises with temperature (activation energy); physisorption is non-specific and falls with temperature. Adsorption of solute on a liquid surface lowers surface tension and desorption raises it.

Teacher's Note: Adsorbed solute lowers surface tension; desorption reverses it.

Exam Note: Link adsorption to surface tension.

Question Match the Column, 3. Match: Column-I: (A) Milk, (B) Dust, (C) Cheese, (D) Froth. Column-II: (P) Aerosol, (Q) Emulsion, (R) Gel, (S) Foam.

Solution. Answer (from key): A → Q; B → P; C → R; D → S. Milk is an emulsion, dust in air is an aerosol, cheese is a gel and froth is a foam.

Teacher's Note: Classify by dispersed phase and medium.

Exam Note: Know a colloid example for each type.

Question Match the Column, 4. Match: Column-I: (A) Liquid dispersed in gas, (B) Gas dispersed in liquid, (C) Liquid dispersed in solid, (D) Liquid dispersed in liquid. Column-II: (P) Foam, (Q) Emulsion, (R) Aerosol, (S) Gel.

Solution. Answer (from key): A → R; B → P; C → S; D → Q. Liquid in gas is an aerosol, gas in liquid is a foam, liquid in solid is a gel and liquid in liquid is an emulsion.

Teacher's Note: Name = (dispersed phase, medium) pair.

Exam Note: Memorise the eight colloid types.

Question Match the Column, 5. Match: Column-I: (A) As2S3 sol, (B) Sulphur sol, (C) Starch, (D) Soap. Column-II: (P) Lyophobic colloid, (Q) Macromolecular colloid, (R) Multimolecular colloid, (S) Associated colloid.

Solution. Answer (from key): A → P,R; B → P,R; C → Q; D → S. As2S3 and sulphur sols are lyophobic and multimolecular; starch is macromolecular; soap forms micelles and is an associated colloid.

Teacher's Note: Classify each by size and affinity.

Exam Note: Two classifications can apply together.

Question Match the Column, 6. Match: Column-I: (A) Coagulation, (B) Electrophoresis, (C) Tyndall effect, (D) Brownian movement. Column-II: (P) Due to presence of charge, (Q) Due to scattering of light, (R) Due to neutralization of charge, (S) Due to impact of the molecules of the dispersion medium with colloidal particles.

Solution. Answer (from key): A → R; B → P; C → Q; D → S. Coagulation follows neutralisation of charge, electrophoresis is due to charge, the Tyndall effect is due to scattering and Brownian motion is due to impacts of medium molecules.

Teacher's Note: Match each effect with its physical cause.

Exam Note: Cause of each colloid property.

Question Match the Column, 7. Match: Column-I: (A) Peptization, (B) Ultra centrifugation, (C) Electrodialysis, (D) Bredig's arc method. Column-II: (P) Preparation of sols, (Q) Purification of sols, (R) Preparation of metal sols, (S) Movement of ions across the membrane in presence of electric field.

Solution. Answer (from key): A → P; B → Q; C → Q,S; D → P,R. Peptization prepares a sol; ultracentrifugation purifies; electrodialysis purifies by moving ions across a membrane in an electric field; Bredig's arc prepares metal sols (also a method of preparing sols).

Teacher's Note: Separate preparation methods from purification methods.

Exam Note: Bredig arc: preparation of metal sols.

Assertion-Reason Type Questions

Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark (A) if both statements are true and Statement-2 is the correct explanation of Statement-1; (B) if both are true and Statement-2 is not the correct explanation; (C) if Statement-1 is true and Statement-2 is false; (D) if Statement-1 is false and Statement-2 is true.

Question Assertion-Reason, 1. Statement-1: For adsorption ΔG, ΔH, ΔS all have -ve values. Statement-2: Adsorption is a exothermic process in which randomness decreases due to force of attraction between adsorbent and adsorbate.

Solution. Answer (from key): (A). Both are true: adsorption is spontaneous (ΔG < 0), exothermic (ΔH < 0) and randomness decreases (ΔS < 0); Statement-2 explains the signs.

Teacher's Note: Adsorption: ΔG, ΔH, ΔS all negative.

Exam Note: Give the sign of each term.

Question Assertion-Reason, 2. Statement-1: The extent of adsorption of CO2 is much more higher than of H2. Statement-2: CO2(g) has higher critical temperature and more van der Waals' force of attraction as compare to H2(g).

Solution. Answer (from key): (A). Both are true; the higher critical temperature and stronger van der Waals forces of CO2 explain its greater adsorption.

Teacher's Note: Easily liquefiable gas is adsorbed more.

Exam Note: Link Tc to adsorption.

Question Assertion-Reason, 3. Statement-1: In absorption, the molecules of a substance are uniformly distributed throughout the body of other substance. Statement-2: In some cases, both absorption and adsorption takes place simultaneously.

Solution. Answer (from key): (B). Both are true, but simultaneous adsorption and absorption (sorption) does not explain uniform distribution in absorption.

Teacher's Note: Absorption is bulk uniform distribution; sorption is a different idea.

Exam Note: Absorption vs sorption.

Question Assertion-Reason, 4. Statement-1: More heat evolved in physisorption than in chemisorption. Statement-2: Molecules of adsorbate and adsorbent are held by van der Waals' forces in physisorption and by chemical bonds in chemisorption.

Solution. Answer (from key): (D). Statement-1 is false (chemisorption evolves more heat, 80-240 kJ/mol against 20-40 kJ/mol); Statement-2 is true.

Teacher's Note: Chemisorption has stronger forces and larger heat.

Exam Note: Compare enthalpies.

Question Assertion-Reason, 5. Statement-1: Colloidal solution is electrically neutral. Statement-2: Due to similar nature of the charge carried by the particles, they repel each other and do not combine to form bigger particles.

Solution. Answer (from key): (B). Both are true; a sol as a whole is neutral because the medium carries the opposite charge, but Statement-2 explains stability, not neutrality.

Teacher's Note: Particles are charged, medium has opposite charge.

Exam Note: Sol is neutral overall.

Question Assertion-Reason, 6. Statement-1: Soap and detergent are macro-molecular colloids. Statement-2: Soap and detergent are molecules of large size.

Solution. Answer (from key): (D). Answer as printed in the key: soaps and detergents are associated colloids (not macromolecular), so Statement-1 is false.

Teacher's Note: Soaps are associated colloids that form micelles.

Exam Note: Do not call soap macromolecular.

Question Assertion-Reason, 7. Statement-1: Micelles are formed by surfactant molecules above the critical micelle concentration (CMC). Statement-2: The conductivity of a solution having surfactant molecules decrease sharply at the CMC.

Solution. Answer (from key): (A). Answer as printed in the key: micelles form above the CMC and the sharp change in solution properties at CMC (conductivity change) reflects micelle formation.

Teacher's Note: CMC marks the start of micelle formation.

Exam Note: Define CMC.

Question Assertion-Reason, 8. Statement-1: The micelle formed by sodium stearate in water has -COO- groups at the surface. Statement-2: Surface tension of water is reduced by the addition of stearate.

Solution. Answer (from key): (B). Both are true: the polar -COO- heads face water on the micelle surface; reduction of surface tension is a separate effect and does not explain it.

Teacher's Note: Polar heads outward, hydrocarbon tails inward.

Exam Note: Describe the stearate micelle.

Question Assertion-Reason, 9. Statement-1: Protein, starch are lyophilic colloids. Statement-2: They have strong interaction with the dispersion medium.

Solution. Answer (from key): (A). Both are true; strong interaction with the medium is exactly why they are lyophilic.

Teacher's Note: Lyophilic means solvent-loving.

Exam Note: Define lyophilic.

Question Assertion-Reason, 10. Statement-1: Colloidal AgI is prepared by adding KI in slight excess to AgNO3 solution, the sol particles migrate toward cathode under electric field. Statement-2: Colloidal particles adsorb ions and thus becomes electrically neutral.

Solution. Answer (from key): (C). Answer as printed in the key (Statement-1 true, Statement-2 false). Particles adsorbing excess Ag+ (positive sol) move towards the cathode, and adsorption of ions makes particles charged, not neutral. The wording of Statement-1 is ambiguous; needs a human check.

Teacher's Note: Excess Ag+ gives a positive AgI sol: cathode.

Exam Note: Colloid particles become charged on adsorption.

Question Assertion-Reason, 11. Statement-1: When SnO2 is reacted with NaOH, then its sol particles are attracted towards cathode. Statement-2: When SnO2 is reacted with NaOH, then it gives SnO32- which is adsorbed by SnO2, so it is negatively charged sol.

Solution. Answer (from key): (D). Statement-2 is true: the sol is negatively charged by adsorbing SnO32-, so the particles go towards the anode. Statement-1 is therefore false.

Teacher's Note: Negative sol migrates to the anode.

Exam Note: Sign of charge fixes direction.

Question Assertion-Reason, 12. Statement-1: For coagulation of positively charged sols, [Fe(CN)6]4- ion has higher coagulating power than that of PO43-, SO42-, Cl-. Statement-2: Because according to Hardy-Schulze rule, higher is the valency of ions for the oppositely charged sol particles, better will be the precipitation.

Solution. Answer (from key): (A). Both are true; the Hardy-Schulze rule explains the higher coagulating power of the tetravalent anion.

Teacher's Note: Positive sol: highest-charge anion coagulates best.

Exam Note: State the Hardy-Schulze rule.

Question Assertion-Reason, 13. Statement-1: Dispersed phase particles of colloidal solution cannot pass through ultra-filter paper. Statement-2: The size of colloidal particles are larger than the size of true solution particles.

Solution. Answer (from key): (A). Both are true; colloidal particles are larger than the pores of ultra-filter paper because they are larger than true-solution particles.

Teacher's Note: Ultrafilter holds back colloid-sized particles.

Exam Note: Size explains filtration behaviour.

Question Assertion-Reason, 14. Statement-1: When a finely divided active carbon is stirred into a dilute solution of a dye, the intensity of colour in the solution is decreased. Statement-2: The dye is adsorbed on the solid surface.

Solution. Answer (from key): (A). Both are true; adsorption of the dye on the carbon surface lowers the colour of the solution.

Teacher's Note: Colour fades because dye sticks to carbon.

Exam Note: Adsorption removes the dye.

Question Assertion-Reason, 15. Statement-1: Silica gel is used for drying air. Statement-2: Silica gel adsorbs moisture from air.

Solution. Answer (from key): (A). Both are true; silica gel dries air precisely because it adsorbs moisture on its surface.

Teacher's Note: Silica gel adsorbs water vapour.

Exam Note: Drying agent action.

Question Assertion-Reason, 16. Statement-1: ZSM-5 is a type of zeolites used as a catalyst in petrochemical industries. Statement-2: Zeolites are microporous aluminosilicates three dimensional network silicates in which some silicon atoms are replaced by aluminium atoms.

Solution. Answer (from key): (B). Both are true, but the structure of zeolites does not by itself explain the use of ZSM-5 as a petrochemical catalyst (shape selectivity does).

Teacher's Note: Zeolite pores give shape-selective catalysis.

Exam Note: Zeolites: Si replaced by Al.

Question Assertion-Reason, 17. Statement-1: Lyophilic colloids are called as reversible sols. Statement-2: Lyophilic sols are extensively hydrated.

Solution. Answer (from key): (B). Both are true; lyophilic sols are reversible because they can be re-formed on adding the medium, and hydration alone is not the direct explanation.

Teacher's Note: Lyophilic sols re-form after evaporation.

Exam Note: Reversible means re-dispersible.

Question Assertion-Reason, 18. Statement-1: A catalyst is more effective in finely divided form. Statement-2: Finely divided form has more surface area.

Solution. Answer (from key): (A). Both are true; larger surface area gives more active sites and hence greater effectiveness.

Teacher's Note: More surface area means more active sites.

Exam Note: Link catalyst form to area.

Question Assertion-Reason, 19. Statement-1: Sky appears blue in colour. Statement-2: Colloidal particles of dust along with water suspended in air scatter blue light.

Solution. Answer (from key): (A). Both are true; scattering of blue light by suspended colloidal particles makes the sky look blue.

Teacher's Note: Scattering of short wavelengths.

Exam Note: Blue sky: scattering.

Question Assertion-Reason, 20. Statement-1: The conversion of fresh precipitate to colloidal state is called peptization. Statement-2: It is caused by addition of common ions.

Solution. Answer (from key): (B). Both are true; peptization is caused by a peptizing agent, usually an electrolyte supplying a common ion, but this does not define peptization.

Teacher's Note: Peptizing agent supplies adsorbed ions.

Exam Note: Define peptization.

Question Assertion-Reason, 21. Statement-1: Colloidal solutions are stable but colloidal particles do not settle down. Statement-2: Brownian movement counters the force of gravity act on colloidal particles.

Solution. Answer (from key): (A). Both are true; Brownian motion opposes gravity, so particles remain suspended and the sol is stable.

Teacher's Note: Brownian motion prevents settling.

Exam Note: Brownian motion gives stability.

Question Assertion-Reason, 22. Statement-1: A colloid gets coagulated by addition of an electrolyte. Statement-2: Coagulation depends on the valance and sign of the charge of the coagulant ion.

Solution. Answer (from key): (B). Answer as printed in the key: both statements are true, and Statement-2 describes Hardy-Schulze dependence rather than directly explaining why an electrolyte coagulates.

Teacher's Note: Electrolyte neutralises charge on colloid.

Exam Note: Valency and sign of coagulant ion.

Question Assertion-Reason, 23. Statement-1: Suspensions are visible to naked eye. Statement-2 (printed as Statement-1): Size of suspension particles are smaller than colloidal particles.

Solution. Answer (from key): (C). Statement-1 is true (suspension particles exceed 1000 nm), whereas the second statement is false because suspension particles are larger than colloidal particles.

Teacher's Note: Suspension particles are larger than 1000 nm.

Exam Note: Compare sizes of suspension and colloid.

Question Assertion-Reason, 24. Statement-1: At pH of isoelectric point, the sol particles of amino acids neither move towards anode nor cathode. Statement-2: Because at the isoelectric point, the concentration of conjugate base and conjugate acid of the Zwitter ions becomes equal and so one's charge is counterbalanced by other.

Solution. Answer (from key): (A). Both are true; the equal concentrations of the conjugate acid and base forms of the zwitterion make the net charge zero, so there is no migration.

Teacher's Note: Net charge is zero at the isoelectric point.

Exam Note: Define isoelectric point.

Question Assertion-Reason, 25. Statement-1: Gold sol is multimolecular and hydrophobic in nature. Statement-2: Gold sol is prepared by Bredig's arc method.

Solution. Answer (from key): (B). Both are true, but the method of preparation does not explain its multimolecular and hydrophobic nature.

Teacher's Note: Preparation method does not explain nature.

Exam Note: Gold sol: multimolecular, lyophobic.

Subjective Problems

Question Subjective Problems, 1. How many colloidal systems exist in nature?

Solution. Answer (from key): 8. There are eight types of colloidal systems (all combinations of gas, liquid and solid as dispersed phase and medium, except gas in gas, which forms a true solution).

Teacher's Note: Combine three states, drop gas-in-gas: 3 × 3 − 1 = 8.

Exam Note: Gas-in-gas is not colloidal.

Question Subjective Problems, 2. How many colloidal systems exist in nature in which liquid is dispersed phase?

Solution. Answer (from key): 3. Liquid dispersed in gas (aerosol), in liquid (emulsion) and in solid (gel): three systems.

Teacher's Note: Liquid as dispersed phase: gas, liquid or solid medium.

Exam Note: Count three media.

Question Subjective Problems, 3. How many colloidal systems exist in nature in which gas is dispersed phase?

Solution. Answer (from key): 2. Gas in liquid (foam) and gas in solid (solid foam): two systems, since gas in gas is a true solution.

Teacher's Note: Gas in gas is a mixture, not colloid.

Exam Note: Exclude gas in gas.

Question Subjective Problems, 4. What is the minimum diameter (in nm) of colloidal particles?

Solution. Answer (from key): 1. Colloidal particles range from 1 nm to 1000 nm, so the minimum diameter is 1 nm.

Teacher's Note: Colloid range is 1 to 1000 nm.

Exam Note: State the colloid size range.

Question Subjective Problems, 5. For soaps critical micelle concentration (CMC) is 10-x (min.) to 10-y (max.) mol/L. What is the value of x ?

Solution. Answer (from key): 4. For soaps the CMC lies between 10-4 M and 10-3 M, so the minimum is 10-4, giving x = 4 (and y = 3).

Teacher's Note: CMC for soaps is 10-4 to 10-3 M.

Exam Note: Recall the CMC range.

Download Narendra Awasthi Solutions for JEE Math PDF

Download Narendra Awasthi Solutions for JEE

Access the complete chapter-wise PDF for Narendra Awasthi Solutions Physical Chemistry Chapter 11 Surface Chemistry. These structured Narendra Awasthi Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.