Step-by-Step MS Chauhan Solutions for JEE Chemistry Chapter 12 Aromatic Compounds
Review structured textbook solutions for JEE Chemistry Chapter 12 Aromatic Compounds prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 12 Aromatic Compounds Textbook Solutions PDF
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
MS Chauhan Aromatic Compounds Level 1 - Questions 1 to 150
Level 1
Question 1. Identify the position where electrophilic aromatic substitution (EAS) is most favourable in the ring shown: a benzene ring bearing –NHCOCH3 at C1 and –CH3 at the adjacent carbon C2; arrow A points to the ring carbon next to the CH3, arrow B to the carbon para to the NHCOCH3, arrow C to the other ring carbon. (a) A (b) B (c) C (d) A and C
Solution. Answer: (b) B. The acetamido group (–NHCOCH3) is a stronger o/p-director than CH3. Position B is para to –NHCOCH3 and is free of steric crowding, so the electrophile attacks there.
Teacher's Note: Compare activating power of two directors; the stronger one decides, and sterics pick para.
Exam Note: Rank directing groups; pick para over crowded ortho.
Question 2. Four compounds: (a) nitrobenzene, (b) chlorobenzene, (c) toluene, (d) benzene. Correct order of rate of EAS is: (a) c > b > a > d (b) c > d > a > b (c) a > b > c > d (d) c > d > b > a
Solution. Answer: (d). CH3 activates (+I, hyperconjugation), so toluene is fastest; benzene is the reference; Cl deactivates by –I outweighing +M; NO2 strongly deactivates (–I, –M). Order: toluene > benzene > chlorobenzene > nitrobenzene, i.e. c > d > b > a.
Teacher's Note: Activating > benzene > halogen (weakly deactivating) > nitro (strongly deactivating).
Exam Note: Place the halogen between benzene and nitro.
Question 3. In the coupling N,N-dimethylaniline + Ar–N2+Cl– → p-(Me2N)C6H4–N=N–Ar (C–N coupling), the reaction takes place at: (a) low pH (b) intermediate pH (c) high pH (d) any pH
Solution. Answer: (b) intermediate pH. At low pH the amine is protonated (–NMe2H+, no longer activating); at high pH the diazonium ion changes into the unreactive diazotate. Coupling with amines therefore needs mildly acidic to neutral (intermediate) pH.
Teacher's Note: Both partners must stay active: free amine and diazonium cation.
Exam Note: Amines: pH 4–7; phenols: pH 9–10.
Question 4. Which of the following has the lowest heat of combustion? (a) a cycloheptatriene ring carrying a vinyl group (b) a cyclohexadiene ring with an exocyclic double bond to a vinyl group (c) a benzene ring carrying an unsaturated side chain (d) methylcyclooctatetraene
Solution. Answer: (c). Lowest heat of combustion means the most stable (lowest energy) compound. (c) contains a benzene ring (full aromatic stabilisation) conjugated with the side chain, while (a), (b) and (d) are non-aromatic polyenes (cyclooctatetraene is non-planar, non-aromatic).
Teacher's Note: Lower heat of combustion = greater stability; aromatic ring wins.
Exam Note: Link stability to heat of combustion.
Question 5. Product of the reaction p-BrC6H4CH2Cl + NaCN (ethanol): (a) p-BrC6H4CH2CN (b) unchanged p-BrC6H4CH2Cl (c) p-NC–C6H4CH2CN (d) ring-substituted compound with CN ortho to CH2Cl and Br retained
Solution. Answer: (a). The benzylic C–Cl bond undergoes SN2 with CN–. The aryl C–Br bond (sp2 carbon, partial double-bond character) is inert under these conditions.
Teacher's Note: Benzylic halide reacts; aryl halide does not.
Exam Note: Distinguish benzylic from aryl halide reactivity.
Question 6. Benzene + phthalic anhydride → (AlCl3, then H3O+) A → (Zn–Hg, HCl, heat) B → (1. SOCl2; 2. AlCl3; 3. H3O+) C. The end product C is: (a) anthraquinone (b) anthrone (9(10H)-anthracenone) (c) 1,2-dibenzoylbenzene (d) 2-benzoylbenzoic acid
Solution. Answer: (b). A = 2-benzoylbenzoic acid (Friedel–Crafts acylation). B = 2-benzylbenzoic acid (Clemmensen reduction of C=O to CH2). C: SOCl2 makes the acid chloride, AlCl3 brings intramolecular Friedel–Crafts acylation, giving anthrone (ring-closed ketone with a CH2 at C10).
Teacher's Note: Track each step: acylation, Clemmensen, then ring closure.
Exam Note: Name A, B, C stepwise to earn marks.
Question 7. How many benzylic hydrogens are present in the hydrocarbon shown (a benzene ring fused peri-wise to two saturated six-membered rings that share a common sp3 carbon attached to the benzene ring)? (a) 3 (b) 4 (c) 5 (d) 6 (e) 8
Solution. Answer: (c) 5. The ring carbon positions bear two benzylic CH2 groups (2 H each) and one benzylic CH (1 H): 2 + 2 + 1 = 5.
Teacher's Note: Benzylic H = H on sp3 carbons directly attached to the ring.
Exam Note: Count CH2 and CH attached to ring separately.
Question 8. Major product of p-isopropyltoluene (p-cymene) + HNO3/conc. H2SO4: (a) NO2 ortho to isopropyl (b) NO2 ortho to CH3 (meta to isopropyl) (c) NO2 at the ring carbon bearing the CH3 end (d) NO2 on the isopropyl carbon (side chain)
Solution. Answer: (b). Both groups are o/p-directors and sit para to each other, so substitution goes ortho to one of them. The bulky isopropyl group blocks its ortho positions, so the nitro group enters ortho to the smaller CH3 group.
Teacher's Note: Steric hindrance decides between two similar activating groups.
Exam Note: Choose ortho to the smaller alkyl group.
Question 9. Major product of mononitration of phenyl benzoate (C6H5–CO–O–C6H5) with conc. HNO3/conc. H2SO4: (a) NO2 meta on the benzoyl ring (b) NO2 para on the benzoyl ring (c) NO2 ortho on the phenoxy ring (d) NO2 para on the phenoxy ring
Solution. Answer: (d). The ring bonded to the O of the ester is activated by the lone pair on O (+M, though reduced by the C=O), while the benzoyl ring is deactivated by C=O. Nitration occurs on the phenoxy ring, para (less hindered) to O.
Teacher's Note: Decide which ring is more electron-rich first.
Exam Note: Phenoxy ring attacked, para product major.
Question 10. Increasing order of rate of reaction with HNO3/H2SO4 for three benzene-fused bis-lactones: (i) both C=O groups attached to the benzene ring, (ii) one C=O and one ring O attached to the benzene ring, (iii) both ring O atoms attached to the benzene ring. (a) iii < ii < i (b) ii < iii < i (c) i < iii < ii (d) i < ii < iii
Solution. Answer: (d) i < ii < iii. A carbonyl attached to the ring withdraws electrons (deactivating); an O atom attached to the ring donates by +M (activating). (i) has two deactivating C=O groups, (ii) has one of each, (iii) has two donor O atoms, so reactivity is i < ii < iii.
Teacher's Note: Count donor versus acceptor groups on the ring.
Exam Note: Tabulate +M and –M substituents per compound.
Question 11. Increasing order of rate of reaction with Br2/AlCl3 for: (i) 1-tetralol-type compound (OH on saturated ring), (ii) a second tetralol isomer, (iii) tetralone (C=O conjugated with the benzene ring), (iv) a hydroxy-substituted chromane (OH and ring O on the benzene ring). (a) iii < i < ii < iv (b) iv < ii < i < iii (c) ii < iv < iii < i (d) iv < ii < iii < i
Solution. Answer: (a) iii < i < ii < iv. (iii) has a ring-conjugated C=O (deactivating) so it is slowest. (i) and (ii) are only alkyl-substituted (weak activation, OH is not on the ring). (iv) carries a ring OH and a ring alkoxy O, both strong +M donors, so it is fastest.
Teacher's Note: Ranking: ketone-deactivated < alkyl-activated < O-donor-activated.
Exam Note: Rank by +M donors and –M acceptors.
Question 12. Increasing order of equilibrium constant for hydrate formation of four tetralone-type ketones: (i) OCH3-substituted (strongly donating position), (ii) OCH3-substituted at another position, (iii) unsubstituted ketone, (iv) NO2-substituted ketone. (a) i < ii < iii < iv (b) iv < ii < i < iii (c) ii < iv < iii < i (d) iv < ii < iii < i
Solution. Answer: (a) i < ii < iii < iv. Hydration adds water across C=O; the more electrophilic the carbonyl carbon, the larger K. Electron-donating OCH3 reduces electrophilicity (most when conjugated), the plain ketone is intermediate, and electron-withdrawing NO2 increases it.
Teacher's Note: EWG raises, EDG lowers carbonyl electrophilicity and hydrate K.
Exam Note: State EDG/EWG effect on the carbonyl carbon.
Question 13. Rank the reactions A, B and C in order of increasing rate: (A) toluene + SO3/H2SO4 giving meta-toluenesulfonic acid; (B) toluene + SO3/H2SO4 giving ortho-toluenesulfonic acid; (C) nitrobenzene + SO3/H2SO4 giving m-nitrobenzenesulfonic acid. (a) B > A > C (b) B > C > A (c) A > B > C (d) A > C > B
Solution. Answer: (a) B > A > C. CH3 stabilises ortho attack best (and para), so ortho formation (B) is fastest; meta attack on toluene (A) is slower; attack on nitrobenzene (C) is slowest because the ring is strongly deactivated. Hence B > A > C.
Teacher's Note: Rates follow partial rate factors: ortho > meta in toluene; nitrobenzene slowest.
Exam Note: Compare ortho, meta and deactivated cases.
Question 14. Increasing order of rate towards EAS with bromine/FeBr3: (A) chroman-4-one (C=O on ring, O attached to ring), (B) isochroman-3-one type lactone with C=O attached to ring, (C) a dihydrocoumarin lactone (ring O attached to benzene, C=O not on ring). (a) B < A < C (b) B < C < A (c) A < B < C (d) A < C < B
Solution. Answer: (a) B < A < C. In B the ring carries only a deactivating C=O (strongly deactivated). In A a C=O (deactivating) and an O (activating) are both attached to the ring, so net effect is smaller deactivation. In C only the O donor is attached, so it is the most reactive: B < A < C.
Teacher's Note: Net ring activation = donor O minus acceptor C=O attached to the ring.
Exam Note: Count groups attached directly to the ring.
Question 15. In 3-methylcarbazole-type compound (a carbazole with an NH bridge, ring positions numbered 1, 2 on one ring and 3, 4 on the other, CH3 on the ring bearing 1 and 2) identify the position where E.A.S. can take place: (a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer: (a) 1 (from key). The NH lone pair is a strong activator for the positions ortho and para to the carbon bearing N; position 1 lies ortho to that carbon, on the ring that also carries the CH3, so it is the most activated site.
Teacher's Note: Strongest donor (NH) controls the site, ortho/para to N.
Exam Note: Locate N-ortho/para positions first.
Question 16. A polycyclic hydrocarbon (two benzene rings joined by saturated bridging carbons) on treatment with H+/Δ gives (A), which with HNO3/Δ gives (B). Product (B) is: (a)–(d) nitro derivatives of a fused tetracyclic aromatic skeleton with NO2 at different positions.
Solution. Answer: (c) (from key). Acid and heat convert the starting hydrocarbon into a more extended aromatic ring system (A) by cyclisation/aromatisation; nitration of A then places NO2 at the most reactive position of the fused system, as shown in option (c).
Teacher's Note: Aromatise first; then nitrate at the most reactive position.
Exam Note: State A before predicting B.
Question 17. In the acetanilide-type ring shown (–NHCOCH3 on the ring; carbons numbered 1–4 around the ring, 2 being para to the amide N), sulphonation is most favourable at carbon number: (a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer: (b) 2. The –NHCOCH3 group is an o/p-director; the para position (carbon 2) is least hindered, and sulphonation (bulky, reversible electrophile SO3) strongly prefers para.
Teacher's Note: Bulky electrophile plus o/p-director gives para.
Exam Note: Sulphonation: thermodynamic, para-selective.
Question 18. Decreasing order of reactivity towards EAS for (a) toluene C6H5CH3, (b) C6H5CD3, (c) C6H5CT3: (a) a > b > c (b) c > b > a (c) a > c > b (d) c > a > b
Solution. Answer: (a) a > b > c. Activation by the alkyl group is by hyperconjugation. C–H hyperconjugates better than C–D, which is better than C–T (heavier isotope, lower zero-point energy, stronger bond).
Teacher's Note: Hyperconjugation order H > D > T (Baker–Nathan type).
Exam Note: Name hyperconjugation as the cause.
Question 19. Decreasing order of rate of EAS for (a) 1,3,5-trimethylbenzene, (b) p-xylene, (c) m-xylene, (d) toluene: (a) a > b > c > d (b) a > c > b > d (c) b > a > c > d (d) b > c > a > d
Solution. Answer: (b) a > c > b > d. Each CH3 activates; mesitylene has three (all reinforcing, positions o,o,p to methyls) so it is fastest. In m-xylene the two CH3 groups reinforce at the same positions; in p-xylene they do not reinforce. Toluene has only one CH3.
Teacher's Note: Reinforcing o/p effects (meta-dimethyl) beat non-reinforcing (para).
Exam Note: Count methyls and check whether they reinforce.
Question 20. Increasing order of rate of nitration of (a) benzene, (b) toluene, (c) hexadeuterobenzene C6D6, (d) nitrobenzene, (e) chlorobenzene: (a) b < c < a < d < e (b) d < e < a = c < b (c) d < a < c < e < b (d) a < c < b < e < d
Solution. Answer: (b) d < e < a = c < b. NO2 deactivates most, Cl deactivates weakly, benzene and C6D6 react at the same rate (no primary kinetic isotope effect, since C–H/C–D bond breaking is not rate-determining), and toluene is activated.
Teacher's Note: No kinetic isotope effect in nitration, so C6H6 = C6D6.
Exam Note: State: no isotope effect in nitration.
Question 21. Rate of nitration of three toluene derivatives with ortho positions: (a) both ortho positions H, (b) one ortho H and one ortho D, (c) both ortho D. The rate of nitration will be: (a) a > b > c (b) a > c > b (c) a = b = c (d) c > a > b
Solution. Answer: (c) a = b = c. In nitration the slow step is attack of NO2+ forming the arenium ion; loss of H or D is fast. There is no primary kinetic isotope effect, so all three react at the same rate.
Teacher's Note: Rate-determining step does not break the C–H/C–D bond.
Exam Note: Name the rate-determining step.
Question 22. Major product of 5-tert-butyl-1,1-dimethylindane (benzene ring fused to a gem-dimethylcyclopentane, t-Bu on the ring) with 1. CH3COCl/AlCl3, 2. H2O: options (a) acetyl on the t-Bu carbon, (b) and (d) acetyl at positions next to the gem-dimethyl/t-Bu, (c) acetyl at the ring position ortho to the CH2-side ring junction, away from t-Bu.
Solution. Answer: (c) (from key). The bulky t-butyl group and the quaternary gem-dimethyl carbon hinder neighbouring positions strongly; Friedel–Crafts acylation with the bulky acylium–AlCl3 complex enters the least hindered activated ring position, as in (c). Acylation does not occur on the t-Bu group.
Teacher's Note: Bulky electrophile avoids positions flanked by t-Bu or quaternary carbon.
Exam Note: Justify with steric hindrance.
Question 23. Decreasing order of rate of EAS for (i) benzene, (ii) biphenyl, (iii) fluorene: (a) i > ii > iii (b) iii > ii > i (c) iii > i > ii (d) i > iii > ii
Solution. Answer: (b) iii > ii > i. The phenyl group in biphenyl stabilises the arenium ion by extended resonance, so biphenyl is more reactive than benzene. In fluorene the two rings are held coplanar by the CH2 bridge, giving better conjugation and added alkyl activation, so it reacts fastest.
Teacher's Note: Planarity enhances conjugation: fluorene > biphenyl > benzene.
Exam Note: Explain via arenium ion stabilisation.
Question 24. 1,2,4,5-Tetrachlorobenzene (2 mol) + HO– (4 mol) → (A) (major). Product (A) is one of four chlorinated dibenzo-p-dioxins: (a), (b) 2,3,7,8-tetrachlorodibenzo-p-dioxin (symmetrical, Cl at two adjacent positions on each outer ring), (c) and (d) other Cl-substitution patterns.
Solution. Answer: (b). HO– displaces one Cl (SNAr) giving 2,4,5-trichlorophenoxide. Two such ions then displace ortho Cl from each other, closing the central dioxin ring. The Cl atoms that remain are at positions 2,3 and 7,8, i.e. 2,3,7,8-TCDD.
Teacher's Note: Two successive SNAr steps; Cl pattern of the ring is preserved.
Exam Note: Track the retained Cl atoms to fix the isomer.
Question 25. In which compound does electrophilic aromatic substitution take place in the phenyl ring on the left-hand side? (a) Ph–CO–O–Ph (left ring on C) (b) Ph–CO–NH–Ph (left ring on C) (c) Ph–CH2–O–Ph (left ring on CH2) (d) Ph–CH2–CO–Ph (left ring on CH2)
Solution. Answer: (d). In (d) the left ring carries CH2 (weakly activating) while the right ring carries C=O (deactivating), so the left ring is attacked. In (a) and (b) the left ring is on C=O (deactivated) while the right ring has O or N donors; in (c) the right ring bears the strongly donating O.
Teacher's Note: Compare the substituent on each ring; the more electron-rich ring reacts.
Exam Note: Identify donor and acceptor attached to each ring.
Question 26. Benzene + A (H2SO4) → 1,1,4,4-tetramethyltetralin. Reactant (A) is: (a) succinic anhydride (b) 2,5-dimethyl... a tetrahydrofuran derivative with fewer methyls (c) 2,2,5,5-tetramethyltetrahydrofuran (d) a diacid HO2C–CH2–CH2–CO2H derivative
Solution. Answer: (c). In acid the cyclic ether protonates and opens at both tertiary C–O positions to give tertiary carbocations (Me2C+–CH2–CH2–C+Me2 equivalents). Two successive Friedel–Crafts alkylations on benzene close the six-membered ring: 1,1,4,4-tetramethyltetralin.
Teacher's Note: Tertiary carbocations from the ether do the double alkylation.
Exam Note: Name the cation and the ring closure.
Question 27. Which compound is slowest to react with nitronium ion (NO2+)? (a) benzene (b) tert-butylbenzene (c) acetophenone (d) anisole
Solution. Answer: (c). The acetyl group is a –M, –I deactivating group, so acetophenone is least reactive. tert-Butylbenzene and anisole are activated; benzene is the reference.
Teacher's Note: Look for the only deactivating substituent.
Exam Note: Name acyl as a –M deactivator.
Question 28. Benzene + (CH3)2CHCOCl/AlCl3, then Clemmensen reduction, then CH3COCl/AlCl3, then NaCN/H2SO4 (and subsequent steps), then red P + HI, H3O+ gives ibuprofen. Ibuprofen is: (a) p-ethylphenyl–CH(CH3)CO2H (b) (CH3)2CH–CH2–C6H4–CH(CH3)–CO2H (para) (c) p-isopropylphenyl derivative (d) p-isopropylphenyl–CH(OH)COOH type
Solution. Answer: (b). Isobutyrophenone from the first acylation is reduced to isobutylbenzene, acetylation goes para, and the acetyl group is converted by the later steps into the CH(CH3)CO2H group. Ibuprofen is 2-(4-isobutylphenyl)propanoic acid.
Teacher's Note: Isobutyl group arises from acylation then Clemmensen, not from alkylation.
Exam Note: Know ibuprofen structure: 4-isobutyl, α-methyl acetic acid.
Question 29. What is the major product of the intramolecular Friedel–Crafts reaction (AlCl3) of benzylsuccinic anhydride (a cyclic anhydride O(C=O)CH2–CH(CH2Ph)–C=O)? (a) tetralone carboxylic acid with CO2H on carbon 2 (b) 4-oxo-tetralin... tetralone with CO2H at carbon 3 (c) indanone with CO2H on carbon 2 (d) indanone with CO2H on carbon 3
Solution. Answer: (b). Attack by the acyl group from the CH2C=O end closes a six-membered ring (ring atoms: two aromatic C, CH2, CH, CH2, C=O) giving 3-carboxy-1-tetralone; the other acylation would give a five-membered indanone, less favourable. The released –CO2H stays on the CH carbon.
Teacher's Note: Prefer 6-membered ring closure to 5-membered here.
Exam Note: Count ring atoms for the cyclisation.
Question 30. What combination of acid chloride or anhydride and arene would you choose to prepare p-CH3–C6H4–CO–CH2CH2–CO2H? (a) p-xylene + ClCO–CH2–CH(CH3)–COCl/AlCl3 (b) toluene + succinic anhydride/AlCl3 (c) m-xylene + succinic anhydride/AlCl3 (d) m-xylene + glutaric-type anhydride/AlCl3
Solution. Answer: (b). Friedel–Crafts acylation of toluene with succinic anhydride opens the anhydride and gives 4-(4-methylphenyl)-4-oxobutanoic acid; acylation goes para to CH3 because of sterics.
Teacher's Note: Anhydride ring opening gives keto-acid; toluene acylates para.
Exam Note: Match arene substituents and chain length.
Question 31. Best yield in the conversion of a polycyclic aromatic ketone (aryl C=O) to the corresponding methyl ketone (CH3C(=O)– on the ring, with the original C=O reduced to CH2) is obtained with: (a) A = CH3COCl, AlCl3; B = Zn(Hg), HCl (b) A = Zn(Hg), HCl; B = CH3COCl, AlCl3 (c) A = CH3CH2Cl, AlCl3; B = Zn(Hg), HCl (d) A = NH2NH2/HO–, Δ; B = CH3CH2Cl, AlCl3
Solution. Answer: (b). The ring-attached C=O deactivates the ring toward Friedel–Crafts acylation, so it must be reduced first (Clemmensen, A), after which the activated alkylated ring is acetylated (B).
Teacher's Note: Reduce the deactivating C=O first, then acylate.
Exam Note: Order of steps matters: deactivating group first removed.
Question 32. Rank in decreasing rate of reaction with CH3CH2O– (nucleophilic aromatic substitution): (1) o-bromonitrobenzene, (2) m-bromonitrobenzene, (3) 2,4-dinitrobromobenzene (NO2 ortho and para to Br), (4) bromobenzene with NO2 groups para and meta to Br. (a) 3 > 4 > 1 > 2 (b) 3 > 4 > 2 > 1 (c) 2 > 1 > 4 > 3 (d) 4 > 3 > 2 > 1
Solution. Answer: (a) 3 > 4 > 1 > 2. SNAr is accelerated by –M groups ortho/para to the leaving group (Meisenheimer complex stabilisation). Compound 3 has two (o and p) and is fastest; 4 has one para plus a meta; 1 has one ortho; 2 has only meta, so it is slowest.
Teacher's Note: Count o/p nitro groups; meta nitro helps little.
Exam Note: Rank by number of ortho/para –M groups.
Question 33. Principal organic product of 4-nitro-1-fluoro-2-bromobenzene (NO2 para to F, Br ortho to F) + NaSCH3: (a) SCH3 replaces Br (b) SCH3 replaces F, Br retained, NO2 retained (c) SCH3 at ring carbon ortho to NO2 (d) SCH3 at carbon adjacent to F
Solution. Answer: (b). SNAr takes place at the carbon para to NO2 that carries F. In SNAr, nucleophilic attack is rate-determining, and F (most electronegative) activates the carbon best, so F is displaced (F is the best leaving group in SNAr), not Br.
Teacher's Note: In SNAr, rate order of leaving groups is F > Cl > Br > I.
Exam Note: Attack step is rate-determining, so F wins.
Question 34. Which position of 4-acetyl-4'-methoxybiphenyl is most rapidly attacked by NO2+ (ring positions A, B on the acetyl ring; C, D on the methoxy ring, D being ortho to OCH3)? (a) A (b) B (c) C (d) D
Solution. Answer: (d) D. The ring with OCH3 (strong +M) is far more reactive than the acetyl ring. Within it, the para position is blocked by the other ring, so nitration occurs ortho to OCH3 (position D).
Teacher's Note: Activated ring first; para blocked, so ortho.
Exam Note: Choose ring, then ortho/para position.
Question 35. Aniline → (conc. H2SO4) (X) → (excess Br2/H2O) (Y). Product (Y) is: (a) 2,6-dibromo-4-sulfoaniline (b) 2,6-dibromo-... 3-sulfo derivative (c) 2,4,6-tribromoaniline (d) 2-sulfo-3,5-dibromo type
Solution. Answer: (c). X is sulfanilic acid (p-aminobenzenesulfonic acid). Excess bromine water brominates at both ortho positions and also replaces the SO3H group at the para position (ipso substitution, desulfonation), giving 2,4,6-tribromoaniline.
Teacher's Note: Sulfonic acid at para is replaced by Br (ipso attack).
Exam Note: SO3H can be displaced by Br+.
Question 36. All the hydrocarbons shown are very weak acids. One, however, is far more acidic than the others. Which is the strongest acid? (a) benzene (b) 1,2-dihydronaphthalene-type (a hydrogenated naphthalene) (c) indene (d) benzocycloheptatriene-type (a fused seven-membered ring)
Solution. Answer: (c) indene. Loss of H+ from the CH2 of indene gives the indenyl anion, which has a cyclopentadienyl anion ring (6 π electrons, aromatic) fused to benzene, hence unusually stable and a stronger acid (pKa about 20). The others lack such stabilised conjugate bases.
Teacher's Note: Acidity follows aromatic stabilisation of the conjugate base.
Exam Note: Name the aromatic anion formed.
Question 37. Benzene + succinic anhydride (1. AlCl3) → (A); (2. SOCl2, 3. NaN3) → (B); (4. MeOH, 5. LiAlH4) → (C); (6. NaH, 7. 4-chlorobenzotrifluoride, 8. Δ) → (D). Product (D) is: (a) Ph–CH(O–C6H4–CF3-p)–CH2CH2–NH–CH3 (b) the same skeleton with a plain pentyl chain (c) Ph–CH(OH)–CH2CH2–N(CH3)–C6H4CF3 (d) Ph–CH(OH)–CH2CH2–NH–C6H4CH3
Solution. Answer: (a) (fluoxetine). A = 3-benzoylpropanoic acid; B = acyl azide, which rearranges (Curtius) to an isocyanate; MeOH gives the methyl carbamate; LiAlH4 reduces the C=O to CH–OH and the carbamate to NH–CH3, giving C = PhCH(OH)CH2CH2NHCH3. NaH forms the alkoxide, which displaces Cl by SNAr (activated by para CF3), giving fluoxetine.
Teacher's Note: Curtius loses one carbon; LiAlH4 also turns carbamate into N-methyl.
Exam Note: Name the Curtius rearrangement and the final SNAr ether formation.
Question 38. The action of excess bromine water on salicylic acid forms: (a) 5-bromosalicylic acid (b) 3,5-dibromosalicylic acid (c) 2,4,6-tribromophenol (d) 2,3,5-tribromo-6-hydroxybenzoic acid type
Solution. Answer: (c). Excess bromine water brominates at positions o/p to OH and displaces the COOH group (decarboxylation, ipso substitution), giving 2,4,6-tribromophenol (a white precipitate).
Teacher's Note: –COOH is lost on bromination of salicylic acid in excess Br2/H2O.
Exam Note: Salicylic acid + Br2/H2O gives tribromophenol.
Question 39. What is the correct order of ortho/para ratio when E+ attacks (A) PhF, (B) PhCl, (C) PhBr, (D) PhI? (a) A < B < C < D (b) A = B = C = D (c) D < C < B < A (d) D < B < A < C
Solution. Answer: (a) A < B < C < D. The strong –I effect of the halogen deactivates the ortho position most; F has the strongest –I, so ortho attack is least favourable and the para product dominates (lowest o/p ratio). The –I effect weakens from F to I, so the o/p ratio rises F < Cl < Br < I.
Teacher's Note: Inductive effect falls off with distance and electronegativity: F strongest.
Exam Note: Order o/p ratio by decreasing –I of the halogen.
Question 40. How many products can be formed from toluene in each reaction: mono-nitration (A, HNO3/H2SO4, 40 °C), di-nitration (B, 80 °C), tri-nitration (C, 110 °C)? (a) A = 3, B = 6, C = 8 (b) A = 3, B = 6, C = 6 (c) A = 3, B = 6, C = 10 (d) A = 3, B = 4, C = 6
Solution. Answer: (b). Mononitrotoluenes: o, m, p = 3. Dinitrotoluenes: 2,3-, 2,4-, 2,5-, 2,6-, 3,4-, 3,5- = 6. Trinitrotoluenes: 2,3,4-, 2,3,5-, 2,3,6-, 2,4,5-, 2,4,6-, 3,4,5- = 6.
Teacher's Note: Count positional isomers of C7H8–n(NO2)n directly.
Exam Note: List isomers by positions to avoid counting errors.
Question 41. Nitration takes place at which position of 1-tert-butyl-3-isopropylbenzene (positions: A ortho to both groups; B para to CMe3 and ortho to CHMe2; C meta to both; D ortho to CMe3 and para to CHMe2)? (a) A (b) B (c) C (d) D
Solution. Answer: (b) B. Both alkyl groups direct o/p. A lies between the two groups (too crowded). D is ortho to the very bulky tert-butyl. C is meta to both. B is para to t-Bu and ortho to the smaller isopropyl, so it is the most accessible activated position.
Teacher's Note: Large t-Bu blocks ortho; para to t-Bu is preferred.
Exam Note: Eliminate crowded positions by steric size.
Question 42. o-Carboxyphenylacetic acid (homophthalic acid, HO2C–C6H4–CH2CO2H) + Ac2O, Δ: identify the product. (a) CH2–CCl2Ac derivative (b) mixed anhydride at the ring CO2H only (c) homophthalic anhydride (six-membered cyclic anhydride containing CH2) (d) phthalic anhydride
Solution. Answer: (c). Acetic anhydride dehydrates the diacid: the two acid groups (separated by the two ring carbons and one CH2) lose water to form the six-membered cyclic anhydride, homophthalic anhydride (isochroman-1,3-dione).
Teacher's Note: Diacids that can close a 5- or 6-ring give cyclic anhydrides with Ac2O.
Exam Note: Cyclic anhydride formation: ring size 5 or 6.
Question 43. 4-Chlorobenzoyl chloride (Cl–C6H4–COCl) + benzene/AlCl3 → (A). The unknown (A) is: (a) 4-chlorocarbonylbiphenyl (b) 3-chlorobenzophenone (c) 4-chlorobenzophenone (d) benzophenone
Solution. Answer: (c). The acid chloride (not the aryl chloride) forms the acylium ion, which acylates benzene (Friedel–Crafts acylation), giving 4-chlorobenzophenone, p-Cl–C6H4–CO–C6H5. The aryl C–Cl bond is unreactive.
Teacher's Note: Only COCl is reactive; aryl chloride stays.
Exam Note: Identify which C–Cl bond reacts.
Question 44. Benzene + cyclohexene (H2SO4, Δ) → (A); (A) + NBS then alc. KOH → (B); (B) + RCO3H → (C). Product (C) is: (a) 1,2-epoxy-4-phenylcyclohexane type (b) 1-phenylcyclohexene oxide (epoxide with Ph on the epoxide carbon) (c) 1-phenylcyclohexane-2,3-diol (d) epoxide of 1,2-dihydronaphthalene
Solution. Answer: (b). A = cyclohexylbenzene (alkylation via cyclohexyl cation). NBS brominates the tertiary benzylic C–H, and alc. KOH eliminates HBr to give B = 1-phenylcyclohexene. A peracid epoxidises the double bond: 1-phenyl-1,2-epoxycyclohexane (C).
Teacher's Note: NBS brominates the weakest (tertiary benzylic) C–H.
Exam Note: State A, B, C in sequence.
Question 45. Toluene + Cl2 in presence of light gives: (a) 2,4,6-trichlorotoluene (b) o-chlorotoluene (c) benzyl chloride, C6H5CH2Cl (d) p-chlorotoluene
Solution. Answer: (c). In light, chlorination is a free-radical reaction at the side chain (benzylic C–H, giving the stable benzyl radical), not an electrophilic ring substitution.
Teacher's Note: Light/heat gives side-chain radical substitution; Lewis acid gives ring substitution.
Exam Note: Distinguish radical (light) from ionic (FeCl3) conditions.
Question 46. Benzene + CH3CH2COCl (AlCl3, H2O) → (A); (A) + NH2NH2/HO–, Δ → (B). (B) is: (a) ethylbenzene (b) n-propylbenzene (c) 2-phenylethanol (d) 1-phenylpropan-2-ol
Solution. Answer: (b). Friedel–Crafts acylation gives propiophenone (A). Wolff–Kishner reduction converts C=O to CH2, giving n-propylbenzene (B). Acylation avoids the rearrangement that alkylation with n-propyl chloride would suffer.
Teacher's Note: Acylation then reduction gives straight-chain alkylbenzene.
Exam Note: Mention no carbocation rearrangement.
Question 47. Benzene + methylenecyclohexane (HF, Δ): suitable product is: (a) 1-methyl-2-phenylcyclohexane type (b) 1-methyl-1-phenylcyclohexane (c) 1-methyl-2-phenyl alternative (d) 1-methyl-3-phenylcyclohexane
Solution. Answer: (b). HF protonates the exocyclic C=CH2 to give the tertiary 1-methylcyclohexyl cation (Markovnikov); it attacks benzene, giving 1-methyl-1-phenylcyclohexane.
Teacher's Note: Markovnikov protonation gives the tertiary cation, then Friedel–Crafts alkylation.
Exam Note: Protonate to the more substituted cation.
Question 48. p-Chlorotoluene + NaSH → A. Product (A) is: (a) p-methylbenzenethiol (b) no reaction (c) 4-chlorobenzyl mercaptan (d) 4-chlorothiophenol
Solution. Answer: (b) no reaction. An aryl chloride with no electron-withdrawing group ortho/para to Cl (here a donating CH3) does not undergo SNAr with NaSH under ordinary conditions.
Teacher's Note: SNAr needs –M groups ortho/para to the leaving group.
Exam Note: Say why SNAr fails: no activating group.
Question 49. Aniline + Br2/H2O → (A); (i) NaNO2/HCl, (ii) H3PO2 → (B). Product (B) is: (a) 1,2,4-tribromobenzene (b) 1,3,5-tribromobenzene (c) 1,2,3-tribromobenzene (d) bromobenzene
Solution. Answer: (b). A = 2,4,6-tribromoaniline. Diazotisation followed by H3PO2 replaces N2+ with H, leaving 1,3,5-tribromobenzene, a meta-substituted pattern not reachable by direct bromination.
Teacher's Note: Use –NH2 as a removable directing group.
Exam Note: Show diazonium reduction by H3PO2.
Question 50. 2 mol of p-chloronitrobenzene (Cl para to NO2) + Na2S → (A). Product (A) is: (a) 4-chlorothiophenol (b) bis(4-nitrophenyl) sulfide (c) 4-nitrothiophenol (d) 3-nitrophenyl 4-nitrophenyl sulfide
Solution. Answer: (b). The nitro group para to Cl activates SNAr. S2– displaces Cl from one ring; the resulting thiolate attacks a second molecule in the same way, giving (O2N–C6H4)2S.
Teacher's Note: Sulfide ion is a double nucleophile; two SNAr steps.
Exam Note: Count two molecules of aryl halide per S2–.
Question 51. p-Toluidine + NaNO2/HCl → (A); (A) + phenol (mild basic medium) → (B) (major). Product (B) is: (a) 4-methylazobenzene (b) 4-hydroxy-4'-methylazobenzene (p-HO–C6H4–N=N–C6H4–CH3) (c) 4-phenylphenol (d) the meta-azo isomer of (b)
Solution. Answer: (b). A is p-methylbenzenediazonium chloride. In mildly basic medium phenol exists as phenoxide, a strongly activated ring, and the diazonium ion (weak electrophile) couples at the para position to give the azo dye.
Teacher's Note: Azo coupling goes para to OH when the para position is free.
Exam Note: Name the diazonium salt and the coupling position.
Question 52. Phenol + HNO3/H2SO4 → (A) (more volatile) + (B) (less volatile). Product (A) is: (a) o-nitrophenol (b) m-nitrophenol (c) p-nitrophenol (d) nitrobenzene
Solution. Answer: (a). Nitration of phenol gives o- and p-nitrophenol. o-Nitrophenol has intramolecular hydrogen bonding, so it is steam volatile and more volatile; p-nitrophenol forms intermolecular H-bonds and is less volatile.
Teacher's Note: Intramolecular H-bond means more volatile.
Exam Note: Explain volatility by H-bonding type.
Question 53. p-Nitroaniline + 2 ICl → (x) + 2 HCl (56–63%). Major product (x) is: (a) 2,5-diiodo-4-nitroaniline type (b) 3,5-diiodo-4-nitroaniline (c) 2,6-diiodo-4-nitroaniline (iodines ortho to NH2) (d) 2,5-diiodo isomer
Solution. Answer: (c). The strongly activating NH2 group directs the electrophile I+ (from ICl, polarised Iδ+–Clδ–) to its two ortho positions, the para position being blocked by NO2. The product is 2,6-diiodo-4-nitroaniline.
Teacher's Note: NH2 beats NO2 in directing; ortho positions available.
Exam Note: Name I+ as the electrophile from ICl.
Question 54. Benzene + HNO3/H2SO4 → nitrobenzene. The van't Hoff factor (i) for the formation of NO2+ in this reaction is: (a) 2 (b) 3 (c) 4 (d) 5
Solution. Answer: (c) 4. HNO3 + 2 H2SO4 → NO2+ + H3O+ + 2 HSO4–. One mole of HNO3 gives four moles of particles (NO2+, H3O+, 2 HSO4–), so i = 4.
Teacher's Note: Write the ionisation equation and count the ions produced.
Exam Note: Show the balanced ionic equation.
Question 55. Aniline → nitrobenzene. The missing reagent is: (a) CF3CO3H (b) H2SO4 (c) LiAlH4 (d) NaBH4
Solution. Answer: (a). Trifluoroperacetic acid is a strong oxidising agent that oxidises the –NH2 group of aniline up to –NO2. The others are not oxidising agents (H2SO4 only protonates) or are reducing agents.
Teacher's Note: Oxidation of NH2 to NO2 needs a strong peracid.
Exam Note: Name peracid oxidation of amine to nitro.
Question 56. In the nucleophilic aromatic substitution p-X–C6H4–NO2 + CH3O– → p-CH3O–C6H4–NO2, which halide (–X) is most readily replaced? (a) –F (b) –Cl (c) –Br (d) –I
Solution. Answer: (a) –F. In SNAr the slow step is nucleophilic attack on the ring, which is accelerated by the strong –I effect of the most electronegative halogen; the C–X bond breaks later. Rate order: F > Cl > Br > I.
Teacher's Note: Leaving group order in SNAr is the reverse of SN2.
Exam Note: Rate-determining step is addition, not C–X cleavage.
Question 57. When comparing the hydrogenation of benzene with that of a hypothetical 1,3,5-cyclohexatriene, benzene ______ than the cyclohexatriene. (a) absorbs 152 kJ/mol more heat (b) gives off 152 kJ/mol more heat (c) absorbs 152 kJ/mol less heat (d) gives off 152 kJ/mol less heat
Solution. Answer: (d). Benzene is more stable than the hypothetical triene by the resonance energy (about 152 kJ/mol), so its hydrogenation to cyclohexane is less exothermic: it gives off 152 kJ/mol less heat.
Teacher's Note: Greater stability means less heat evolved on hydrogenation.
Exam Note: Link resonance energy to heat of hydrogenation.
Question 58. In 1-ethyl-4-methylbenzene (CH3–CH2–C6H4–CH3), which hydrogen is most easily abstracted by Br•? (a) a: the CH3 of the ethyl group (b) b: the benzylic CH2 of the ethyl group (c) c: ring hydrogen (d) d: the ring CH3 hydrogens
Solution. Answer: (b). Bromine radical is very selective and abstracts the hydrogen that gives the most stable radical. The secondary benzylic radical from the CH2 group (b) is more stable than the primary benzylic radical from the ring CH3 (d).
Teacher's Note: Stability: 2° benzylic > 1° benzylic > alkyl.
Exam Note: Br• is highly selective for the weakest C–H.
Question 59. The electrophilic aromatic substitution proceeds through a: (a) free radical (b) sigma complex (c) benzyne (d) carbene
Solution. Answer: (b) sigma complex. The electrophile attacks the π system to give a resonance-stabilised carbocation (arenium ion, sigma complex), which then loses H+ to restore aromaticity.
Teacher's Note: EAS mechanism: attack, sigma complex, deprotonation.
Exam Note: Name the arenium ion intermediate.
Question 60. Which substituent of benzene is ortho-para directing in electrophilic substitution and ortho-para directing in nucleophilic substitution? (a) –NO2 (b) –NO (c) –SO3H (d) –SO2Me
Solution. Answer: (b) –NO. The nitroso group has a lone pair on N so it directs ortho/para in EAS despite being deactivating; as an electron-withdrawing group it stabilises the intermediate in SNAr when ortho/para. The others (NO2, SO3H, SO2Me) are meta directors in EAS.
Teacher's Note: –NO is the exception: deactivating yet o/p-directing.
Exam Note: Remember –NO as an o/p deactivator.
Question 61. The number of possible isomers of dichloronitrobenzene is: (a) 3 (b) 4 (c) 6 (d) 8
Solution. Answer: (c) 6. For a benzene ring with three substituents of which two are identical (Cl, Cl, NO2), the isomers are 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-dichloronitrobenzene, numbering NO2 as C1; this is 6 isomers.
Teacher's Note: Formula X2Y on benzene gives 6 isomers.
Exam Note: Use the A2B rule: six isomers.
Question 62. Which of the following is not an aromatic compound? (a) cyclopentadienyl anion (b) cyclopentadienyl cation (c) cyclopropenyl cation (d) cycloheptatrienyl (tropylium) cation
Solution. Answer: (b). The cyclopentadienyl cation has 4 π electrons (4n, planar, cyclic, conjugated), so it is antiaromatic. The anion (6 π e–), the cyclopropenyl cation (2 π e–) and the tropylium cation (6 π e–) obey Hückel's 4n + 2 rule.
Teacher's Note: Count π electrons: 4n means antiaromatic, 4n+2 aromatic.
Exam Note: State π electron count for each ring.
Question 63. 2-Benzylbenzoic acid (HO2C–C6H4–CH2C6H5) → (1. SOCl2; 2. anhydrous AlCl3) → A → (Zn–Hg, conc. HCl) → B. The end product (B) is: (a) anthrone (b) 9,10-dihydroanthracene (c) anthracene (d) 2-benzylbenzaldehyde
Solution. Answer: (b). A: the acid chloride cyclises (intramolecular Friedel–Crafts acylation) to anthrone. Clemmensen reduction converts C=O into CH2, giving B = 9,10-dihydroanthracene.
Teacher's Note: Cyclise first, then reduce C=O to CH2.
Exam Note: Name anthrone as the intermediate A.
Question 64. Nitrobenzene + CH3CH2Cl/AlCl3 → (A). Product (A) is: (a) N-ethylaniline (b) no reaction (c) m-nitroethylbenzene (d) p-nitroethylbenzene
Solution. Answer: (b) no reaction. The NO2 group strongly deactivates the ring, and the ring also complexes with AlCl3. Nitrobenzene does not undergo Friedel–Crafts alkylation or acylation (it is even used as a solvent for them).
Teacher's Note: Strongly deactivated rings fail Friedel–Crafts.
Exam Note: State the rule: FC fails with –NO2.
Question 65. In nitration of benzene by mixed acid, the rate of reaction will be: (a) C6H6 = C6D6 = C6T6 (b) C6H6 > C6D6 > C6T6 (c) C6H6 = C6D6 > C6T6 (d) C6H6 < C6D6 < C6T6
Solution. Answer: (a). The slow step is formation of the arenium ion; the C–H (C–D, C–T) bond is broken only in the fast second step, so there is no primary kinetic isotope effect and the rates are equal.
Teacher's Note: No KIE because C–H cleavage is not rate-determining.
Exam Note: State the rate-determining step to justify equal rates.
Question 66. Aniline → (H2SO5) → (A); (A) + PhCH2CN (EtO–, Δ) → (B). Product (B) is: (a) Ph–N=C(CN)–Ph (b) Ph–N=C–Ph (c) Ph–N=N–Ph (d) Ph–CH=CH–Ph
Solution. Answer: (a). Caro's acid (H2SO5) oxidises aniline to nitrosobenzene (A). Nitrosobenzene condenses with the active methylene compound benzyl cyanide (Ehrlich–Sachs reaction), giving the imine PhN=C(CN)Ph.
Teacher's Note: Nitroso group condenses with active CH2 to form C=N.
Exam Note: Name nitrosobenzene and Ehrlich–Sachs condensation.
Question 67. Which of the following ring compounds obeys Hückel's rule? (a) C4H4–1 (b) C4H4+1 (c) C4H4–2 (d) C4H4
Solution. Answer: (c). Cyclobutadiene has 4 π electrons; the dianion has 6 π electrons (4n + 2, n = 1), planar and cyclic, so it obeys Hückel's rule. The neutral (4 e–), monoanion (5 e–) and monocation (3 e–) do not.
Teacher's Note: Count π electrons: C4H4 has 4, add the charge.
Exam Note: Check 4n+2 after adding electrons.
Question 68. Nitration of which reactant (HNO3/H2SO4) gives the maximum percentage of meta product? (a) toluene (b) aniline (c) benzene (d) isopropylbenzene
Solution. Answer: (b) aniline. In strong acid the –NH2 group is protonated to –NH3+, a meta-directing group, so a large meta fraction (about 47%) forms. Toluene and cumene are o/p-directing and benzene has only one product.
Teacher's Note: Protonated amine is meta-directing.
Exam Note: Explain via anilinium ion in mixed acid.
Question 69. 1,2-Dibromo-1,2,3,4-tetraphenylcyclobutene-type compound (a cyclobutane ring bearing Br at two carbons and four Ph groups) + 2 AgBF4 → (x) + 2 BF4–. Compound (x) will be: (a) tetraphenylcyclobutadiene dication (+2) (b) tetraphenylcyclobutadiene dianion (–2) (c) monocation (+1) (d) monoanion (–1)
Solution. Answer: (a). Ag+ removes both Br as AgBr, giving the tetraphenylcyclobutadiene dication, [C4Ph4]2+, which has 2 π electrons (4n + 2, n = 0) and is aromatic, which is why the double ionisation is easy.
Teacher's Note: Two electrons in the ring π system means aromatic.
Exam Note: Count π electrons in the cyclobutadiene dication: 2.
Question 70. Sodium or potassium phenoxide + (1) CO2, (2) H+ → (A). Which statement about the reaction is true? (a) Ortho isomer is major if PhONa is used (b) Para isomer is major if PhOK is used (c) Product formed is used for preparation of the drug aspirin (d) All of these
Solution. Answer: (d). This is the Kolbe–Schmitt reaction. Sodium phenoxide (small Na+ chelates the incoming CO2) favours the ortho product, salicylic acid; potassium phenoxide gives mainly the para isomer, 4-hydroxybenzoic acid; salicylic acid is acetylated to make aspirin. All three statements are true.
Teacher's Note: Counter-ion size controls ortho/para selectivity in Kolbe–Schmitt.
Exam Note: Name Kolbe–Schmitt; Na gives ortho, K gives para.
Question 71. Two benzyne intermediates are likely to form equally from 14C-labelled chlorobenzene (* marks the labelled carbon, adjacent to the C–Cl carbon). Reaction with amide ion occurs in two different directions with each benzyne, giving three possible products in a 1 : 2 : 1 ratio. NaNH2/NH3 → (A) major. Product (A) is: (a) aniline with NH2 on the labelled carbon (b) aniline with NH2 on the carbon next to the labelled carbon (c) aniline with NH2 meta to the labelled carbon (d) aniline with NH2 para to the label
Solution. Answer: (b) (from key). Elimination of HX gives two benzynes (C1≡C2 and C1≡C6). Amide adds at either carbon of each triple bond. NH2 on the labelled carbon: 25%; on the carbon next to the label (ortho to it): 50% (formed from both benzynes); on the carbon meta to the label: 25%. The 1 : 2 : 1 ratio makes the ortho-to-label product the major one.
Teacher's Note: Cine substitution: attack on either end of the benzyne triple bond.
Exam Note: Count products from both benzynes to get 1:2:1.
Question 72. Which one of the following undergoes nucleophilic aromatic substitution at the fastest rate? (a) 4-chloronitrobenzene (b) 1,4-dichlorobenzene (c) 4-chlorotoluene (d) 4-chloroanisole
Solution. Answer: (a). The para NO2 group (–M, –I) stabilises the Meisenheimer intermediate. The other compounds have no EWG (Cl) or have electron-donating CH3/OCH3 that destabilise it.
Teacher's Note: Only the compound with an o/p electron-withdrawing group reacts quickly.
Exam Note: SNAr needs EWG ortho/para to the leaving group.
Question 73. For the preparation of o-bromonitrobenzene (Br and NO2 ortho), the best combination of reactants is: (a) C6H5Br + HNO3, H2SO4 (b) C6H5Br + H2SO4 (c) C6H5NO2 + Br2, FeBr3 (d) C6H5NO2 + HBr
Solution. Answer: (a). Bromine is an o/p-director, so nitration of bromobenzene gives o- and p-bromonitrobenzene, from which the ortho isomer can be separated. Brominating nitrobenzene would give the meta isomer.
Teacher's Note: Choose the order of introduction by directing effects.
Exam Note: Br first (o/p), then nitrate.
Question 74. The action of AlCl3 in a Friedel–Crafts reaction is: (a) to absorb HCl (b) to release HCl (c) to produce the electrophile (d) to produce the nucleophile
Solution. Answer: (c). AlCl3 is a Lewis acid that removes Cl– from RCl or RCOCl, generating the carbocation R+ or acylium ion RCO+ (the electrophile).
Teacher's Note: Lewis acid generates the carbocation/acylium ion.
Exam Note: Show R–Cl + AlCl3 → R+ + AlCl4–.
Question 75. n-Butylbenzene on oxidation with hot alkaline KMnO4 gives: (a) benzoic acid (b) butanoic acid (c) benzyl alcohol (d) benzaldehyde
Solution. Answer: (a). Any alkyl side chain with at least one benzylic hydrogen is oxidised completely to –COOH, regardless of its length, so n-butylbenzene gives benzoic acid (the rest of the chain is lost as CO2/H2O).
Teacher's Note: Side-chain oxidation needs a benzylic H; whole chain becomes COOH.
Exam Note: State the benzylic-H requirement.
Question 76. Which sequence of steps describes the best synthesis of 2-phenylpropene? (a) Benzene + 2-chloropropene, AlCl3 (b) Benzaldehyde + CH3CH2MgBr, ether; H3O+; H2SO4, heat (c) Bromobenzene + Mg, ether; propanal; H3O+; H2SO4, heat (d) Bromobenzene + Mg, ether; acetone; H3O+; H2SO4, heat
Solution. Answer: (d). PhMgBr + acetone gives 2-phenylpropan-2-ol; acid-catalysed dehydration gives PhC(CH3)=CH2. (b) would give 1-phenylpropene and (c) gives 1-phenylbutene derivatives; (a) gives a Friedel–Crafts product with rearrangement.
Teacher's Note: Count carbons: Ph–C(CH3)2OH dehydrates to 2-phenylpropene.
Exam Note: Build the tertiary alcohol with Grignard + ketone.
Question 77. Products of PhOCH2CH2OH + excess HBr, heat: (a) p-BrC6H4OCH2CH2Br (b) PhBr + BrCH2CH2OH (c) PhOH + BrCH2CH2Br (d) PhBr + BrCH2CH2Br
Solution. Answer: (c). Aryl alkyl ethers cleave with HBr at the alkyl–O bond (Br– attacks the alkyl carbon; the aryl C–O bond is strong). The alkyl alcohol part is also converted to bromide with excess HBr, so the products are phenol and 1,2-dibromoethane.
Teacher's Note: Aryl–O bond never cleaves; alkyl–O does.
Exam Note: Phenol never gives PhBr with HBr.
Question 78. Heating the allylic ether of phenol, phenyl cinnamyl ether (PhO–CH2–CH=CH–C6H5), gives: (a) o-HO–C6H4–CH2CH=CHPh (b) o-HO–C6H4–CH(Ph)–CH=CH2 (c) o-PhO–C6H4–CH2CH=CH2 (d) p-HO–C6H4–CH(C2H5)–CH=CH2
Solution. Answer: (b). This is the Claisen rearrangement, a concerted [3,3]-sigmatropic shift through a six-membered cyclic transition state. The terminal alkene carbon bearing Ph bonds to the ortho carbon, so the allyl group is inverted (the carbon attached to the ring is the CH(Ph)).
Teacher's Note: [3,3] shift inverts the allyl group; ortho product.
Exam Note: Mark the allylic inversion (γ-carbon attaches).
Question 79. Aspirin passes through the acidic stomach and then the basic intestine. Give the structure form that exists in the intestine. (a) the free acid (2-acetoxybenzoic acid) (b) the methyl ester (c) the carboxylate anion of 2-acetoxybenzoic acid (d) salicylate anion or phenoxide form
Solution. Answer: (c). In the basic intestine (pH about 8) the –COOH group of aspirin (pKa about 3.5) is deprotonated to the carboxylate (–COO–), while the acetyl ester remains intact.
Teacher's Note: pH above pKa means the acid exists as its anion.
Exam Note: Compare pH with pKa to choose form.
Question 80. Which set of reagents, used in the order shown, would prepare p-chlorophenol from p-chloronitrobenzene? (a) 1. Fe, HCl; 2. NaOH; 3. NaNO2, H2SO4; 4. H3PO2 (b) 1. Fe, HCl; 2. NaOH; 3. NaNO2, H2SO4; 4. H2O, heat (c) 1. Fe, HCl; 2. NaOH; 3. NaNO2, H2SO4; 4. ethanol (d) 1. NaOH, heat; 2. HCl
Solution. Answer: (b). Fe/HCl reduces NO2 to NH2 (p-chloroaniline after NaOH liberates the free base). NaNO2/H2SO4 gives the diazonium salt, and warming with water replaces N2+ by OH. H3PO2 or ethanol would replace N2+ by H, and NaOH alone cannot displace the unactivated Cl.
Teacher's Note: Diazonium + H2O/heat gives phenol; H3PO2 gives Ar–H.
Exam Note: State what each last step does to N2+.
Question 81. Which compound undergoes bromination of its aromatic ring at the fastest rate? (a) tetralin (1,2,3,4-tetrahydronaphthalene) (b) 1,2,3,4-tetrahydroquinoline (N–H attached to the ring) (c) 1,2,3,4-tetrahydroisoquinoline (NH not on ring) (d) 3,4-dihydroisoquinolin-1(2H)-one (lactam, C=O on ring)
Solution. Answer: (b). In tetrahydroquinoline the NH lone pair is conjugated with the benzene ring (strong +M activator), making it far more reactive than tetralin (alkyl groups only), tetrahydroisoquinoline (N is separated from the ring by CH2) or the lactam (ring-attached C=O deactivates).
Teacher's Note: N attached directly to the ring is the strongest activator.
Exam Note: Check which heteroatom is conjugated with the ring.
Question 82. Phenol + CH3COCl → (P); (P) + anhydrous AlCl3, Δ → (Q). Product (Q) is: (a) anisole-type aryl methyl ether (b) phenyl acetate (c) p-hydroxyacetophenone (d) p-methoxyphenol
Solution. Answer: (c) (from key). P is phenyl acetate. With AlCl3 the Fries rearrangement moves the acetyl group from O to the ring, giving a hydroxyacetophenone; among the options the para isomer, 4-hydroxyacetophenone, is the one listed.
Teacher's Note: Fries rearrangement: aryl ester to hydroxy aryl ketone.
Exam Note: Name Fries rearrangement; note ortho/para choice depends on temperature.
Question 83. 3,4-Dichloronitrobenzene (NO2 at C1, Cl at C3 and at C4, i.e. one Cl meta and one Cl para to NO2) + CH3O–/CH3OH, Δ → (P) (major). The product (P) will be: (a) 3-chloro-4-methoxynitrobenzene (b) Cl replaced at the meta position by OCH3 (c) 4-chloro isomer of (b) pattern (d) both Cl replaced
Solution. Answer: (a). SNAr occurs at the chlorine para to NO2, because the –M effect of NO2 stabilises the negative charge in the Meisenheimer complex only for ortho/para positions. The meta Cl is not activated.
Teacher's Note: SNAr: only o/p leaving group to NO2 is replaced.
Exam Note: State that meta halogen is not activated.
Question 84. Tribenzylamine, (PhCH2)3N + NaNO2, HCl, 90 °C → (A). Product (A) is: (a) PhCH2–N(N=O)–CH2Ph (b) PhCH2–N(Ph)–N=O (c) (PhCH2)3N+–N=O (d) PhN=O
Solution. Corrected: the printed key gives (c). With nitrous acid a tertiary aliphatic amine first forms an N-nitrosoammonium ion, (PhCH2)3N+–N=O, but at 90 °C this loses a benzyl group (as benzaldehyde, nitrosative dealkylation), giving the stable N-nitroso secondary amine, N-nitrosodibenzylamine, option (a).
Teacher's Note: Warm HNO2 dealkylates 3° amines, ending as an N-nitrosamine.
Exam Note: Give nitrosamine as the stable end product.
Question 85. o-Phenylenediamine + NaNO2 + HCl → benzotriazole. This reaction is an example of: (a) intermolecular C–N coupling (b) intramolecular C–N coupling (c) intermolecular N–N coupling (d) intramolecular N–N coupling
Solution. Answer: (d). One NH2 is diazotised; the diazonium group is attacked by the neighbouring free NH2 within the same molecule, forming an N–N bond and closing a five-membered triazole ring, so it is an intramolecular N–N coupling.
Teacher's Note: Both nitrogen partners sit in the same molecule.
Exam Note: Say intramolecular N–N bond formation closes the ring.
Question 86. The total number of isomeric trimethylbenzenes is: (a) 2 (b) 3 (c) 4 (d) 6
Solution. Answer: (b) 3. They are 1,2,3-trimethylbenzene (hemimellitene), 1,2,4-trimethylbenzene (pseudocumene) and 1,3,5-trimethylbenzene (mesitylene).
Teacher's Note: List by substitution pattern: vicinal, unsymmetrical, symmetrical.
Exam Note: Name the three positional isomers.
Question 87. Calicene (triafulvalene–pentafulvene), C8H6 (a cyclopropene ring joined by a double bond to a cyclopentadiene ring), is expected to be a fairly polar aromatic molecule. Which resonance form contributes most to the real structure? (a) neutral structure (b) form with charges inside the five-membered ring only (c) cation on the five-ring and anion on the three-ring (d) anion on the five-membered ring and cation on the three-membered ring
Solution. Answer: (d). Charge separation giving a cyclopentadienyl anion (6 π electrons, aromatic) and a cyclopropenyl cation (2 π electrons, aromatic) makes both rings aromatic, so this dipolar form is the most stabilised.
Teacher's Note: Choose the form in which both rings satisfy Hückel's rule.
Exam Note: Count π electrons in each ring for the dipolar form.
Question 88. Which of the following molecules is expected to have the greatest resonance stabilization? (a) cycloheptatriene=cyclopropene (b) cycloheptatriene=cyclopentadiene (sesquifulvalene) (c) cyclopentadiene=cyclopentadiene (fulvalene) (d) bicyclopropylidene
Solution. Answer: (b). In (b) the dipolar form places a cation on the seven-membered ring (tropylium, 6 π e–) and an anion on the five-membered ring (cyclopentadienyl, 6 π e–); both rings become aromatic, and the π systems are large, giving the greatest stabilisation.
Teacher's Note: Look for the dipolar form with two aromatic rings and large rings.
Exam Note: Compare charge-separated aromatic forms.
Question 89. N-Phenylisoindolin-1-one (a benzene ring fused to a five-membered lactam whose N carries a phenyl group) + Br2 (1 mole)/Fe → major product: (a) Br on the fused benzene ring, para to the CH2 side (b) Br on the fused ring next to C=O side (c) Br on the fused ring next to the CH2 (d) Br para on the N-phenyl ring
Solution. Answer: (d). The fused benzene ring carries an electron-withdrawing C=O and is deactivated, while the N-phenyl ring is activated by the nitrogen lone pair (an amide N, weaker than an amine but still o/p-directing). Bromination goes on the N-phenyl ring at the para position.
Teacher's Note: Pick the ring bearing the donor N, not the ring bearing C=O.
Exam Note: Compare the two rings; para beats ortho by sterics.
Question 90. p-Aminophenol reacts with one equivalent of acetyl chloride in the presence of pyridine to give mainly: (a) p-aminophenyl acetate (b) 2-acetyl-4-aminophenol (c) 3-acetyl-4-aminophenol type C-acylated product (d) N-(4-hydroxyphenyl)acetamide (paracetamol)
Solution. Answer: (d). The –NH2 group is the better nucleophile (more nucleophilic than –OH), so N-acylation is faster than O-acylation; pyridine only neutralises the HCl formed. Ring acylation does not occur under these conditions.
Teacher's Note: N is more nucleophilic than O toward acid chlorides.
Exam Note: Name paracetamol and chemoselective N-acylation.
Question 91. Which of the following reactions can be used to prepare acetophenone? (a) C6H6 + CH3COCl, AlCl3; H2O (b) (C6H5COO)2Ca + (CH3COO)2Ca, heat (c) C6H5CN + CH3MgI, then H3O+ (d) all of these
Solution. Answer: (d). (a) is Friedel–Crafts acylation. (b) is dry distillation of mixed calcium salts, giving PhCOCH3 (with some by-products). (c) Grignard addition to the nitrile gives the imine salt, hydrolysed to the methyl ketone.
Teacher's Note: Three standard acetophenone preparations: FC, Ca-salt pyrolysis, nitrile + RMgX.
Exam Note: Name each method to earn the marks.
Question 92. C6H6 + CH3CH=CH2 (H3PO4, heat) → A; A → (1. O2, heat; 2. H3O+, heat) B + C. The products B and C are: (a) benzaldehyde and acetaldehyde (b) benzoic acid and acetic acid (c) phenol and propionaldehyde (d) phenol and acetone
Solution. Answer: (d). A is cumene (isopropylbenzene). Air oxidation gives cumene hydroperoxide, which on acid treatment rearranges (Hock rearrangement, phenyl shift to O) into phenol and acetone (the cumene process).
Teacher's Note: Cumene process: one reaction makes two industrial chemicals.
Exam Note: Name cumene hydroperoxide rearrangement.
Question 93. An organic compound of molecular formula C8H10O gives a yellow precipitate on heating with I2 and dilute NaOH. The expected compound is: (a) C6H5CH2CH2OH (b) p-CH3–C6H4–CH2OH (c) 2,3-dimethylphenol-type compound (d) C6H5CH(OH)CH3
Solution. Answer: (d). The yellow precipitate is iodoform (CHI3), given by compounds containing the CH3CH(OH)– or CH3CO– group. Of the options only 1-phenylethanol has CH3CH(OH)– attached to the ring.
Teacher's Note: Iodoform test: CH3CH(OH)–R or CH3C=O.
Exam Note: Name the group that gives the iodoform test.
Question 94. p-Cl–C6H4–CH2Br → (Mg, Et2O) A → (1. CH3CHO; 2. H3O+) B. The product (B) is: (a) CH3CH(OH)–C6H4–CH2Br (b) p-Cl–C6H4–CH2–CH(OH)CH3 (c) a diol, p-HOCH(CH3)–C6H4–CH2CH(OH)CH3 (d) a vinyl-substituted benzyl bromide
Solution. Answer: (b). Magnesium inserts into the more reactive benzylic C–Br bond (not the aryl C–Cl) to give p-ClC6H4CH2MgBr. It adds to acetaldehyde to give the secondary alcohol p-ClC6H4CH2CH(OH)CH3.
Teacher's Note: Benzylic C–Br is far more reactive than aryl C–Cl toward Mg.
Exam Note: Choose the halogen that forms the Grignard.
Question 95. 3-Methylindene (indene with CH3 on the double bond) → (OsO4, NaHSO3) A → (1. HIO4; 2. NaOH, heat) B. The final product (B) is: (a) 2-acetylbenzoic acid (b) 2-(2-oxoethyl)acetophenone, o-CH2CHO–C6H4–COCH3 (c) a bicyclic enone, a naphthalenone (benzene fused to a six-membered ring with C=C and C=O) (d) phthalic acid
Solution. Answer: (c) (from key). OsO4 gives the cis-diol. HIO4 cleaves it to the keto-aldehyde o-(OHC–CH2)C6H4COCH3 (option b is this intermediate). NaOH and heat then cause an intramolecular aldol condensation (the CH3 of the ketone attacks the CHO), closing a six-membered ring and losing water to give the cyclic enone, a naphthalenone.
Teacher's Note: Cleave, then intramolecular aldol; six-membered ring forms.
Exam Note: Show the keto-aldehyde intermediate before the aldol.
Question 96. Phthalic anhydride + 1. CH3MgBr (2 mole); 2. H3O+ → product: (a) cyclic diol (3,3-dimethyl... a ring with two Me and two OH) (b) lactol with Me and OH (c) 3,3-dimethylphthalide (lactone) (d) o-HOC(CH3)2–C6H4–COOH
Solution. Answer: (d) (from key). The first MeMgBr opens the anhydride by attack at C=O to give a keto-carboxylate; the second adds to the ketone, giving a tertiary alkoxide. Acid work-up gives 2-(2-hydroxypropan-2-yl)benzoic acid. (This hydroxy acid can cyclise to 3,3-dimethylphthalide on standing or heating; the key lists the open-chain acid.)
Teacher's Note: Two RMgX add: one opens the anhydride, one converts the ketone to a tertiary alcohol.
Exam Note: State both Grignard additions.
Question 97. Hydrogenation of naphthalene (P) with excess H2 over Pd–C stops cleanly at 1,2,3,4-tetrahydronaphthalene (Q). What conclusion can be drawn? (a) the hydrogenation of P is exothermic (b) one aromatic ring of P is more reactive than the aromatic ring of Q (c) one aromatic ring of P is less reactive than the other ring of Q (d) reduction of the first C=C of P is faster than reduction of the second or third C=C
Solution. Answer: (b). Naphthalene has less resonance energy per ring than benzene (about 255 kJ/mol for two rings, less than twice benzene), so one of its rings is more easily hydrogenated than the benzene ring left in tetralin, and the reaction stops at Q.
Teacher's Note: Resonance energy per ring: benzene > naphthalene ring.
Exam Note: Link selectivity to lower aromatic stabilisation per ring.
Question 98. Best reaction conditions for the synthesis of m-bromonitrobenzene from benzene: (a) (1) HNO3, H2SO4; then (2) Br2 (b) (1) Br2; then (2) HNO3, H2SO4 (c) (1) CH3Br, AlBr3; then (2) HNO3, H2SO4 (d) (1) HNO3, H2SO4; then (2) Br2, FeBr3
Solution. Answer: (d). NO2 must be introduced first because it is a meta-director; then Br2/FeBr3 brominates the deactivated ring at the meta position. Brominating first would give o/p isomers. Option (a) lacks the Lewis-acid catalyst needed for brominating nitrobenzene.
Teacher's Note: Meta director first, with a catalyst for the deactivated ring.
Exam Note: Order of steps and need for FeBr3.
Question 99. Tris(cyclopropyl)cyclopropenyl chloride (a cyclopropene ring with Cl on the sp3 carbon and a cyclopropyl group on each ring carbon). In this compound Cl will be liberated easily in the form of: (a) Cl+ (b) Cl– (c) Cl• (d) Cl2+
Solution. Answer: (b) Cl–. Ionisation gives the tris(cyclopropyl)cyclopropenyl cation, which is aromatic (2 π electrons) and further stabilised by the three cyclopropyl groups (conjugation of the Walsh orbitals), so the halide leaves as chloride ion.
Teacher's Note: The carbocation formed is aromatic, so ionisation is easy.
Exam Note: Show the cyclopropenyl cation is aromatic.
Question 100. PhCO2H → (1. PCl5; 2. NH3) A → (1. P4O10, heat; 2. H2/Ni) B. The final product (B) is: (a) benzonitrile (b) benzylamine (c) aniline (d) benzamide
Solution. Answer: (b). A is benzamide. P4O10 dehydrates the amide to benzonitrile; catalytic hydrogenation reduces C≡N to CH2NH2, giving benzylamine (B).
Teacher's Note: Dehydrate then hydrogenate: the carbon count is retained.
Exam Note: Name A and the nitrile intermediate.
Question 101. The major product of the acetylation of salicylic acid with Ac2O/H+ followed by heating with anhydrous AlCl3 is: (a) acetyl group ortho to COOH on the ring (b) 5-acetylsalicylic acid (acetyl para to OH, meta to COOH) (c) acetyl group para to COOH (d) acetyl group at the ortho position next to OH
Solution. Answer: (b). Acetylation gives aspirin (aryl acetate). AlCl3 then brings about the Fries rearrangement, moving the acetyl group from O to the ring; the ring position para to the OH group (position 5, free and unhindered) is attacked.
Teacher's Note: Fries rearrangement: O-acyl to ring-acyl, para to O.
Exam Note: Name aspirin as the intermediate.
Question 102. Compounds: (1) 6,6-dimethylfulvene (a cyclopentadiene ring with an exocyclic =C(CH3)2); (2) 8,8-dimethylheptafulvene (cycloheptatriene ring with exocyclic =C(CH3)2). Which statement is true? (a) PhLi adds to both compounds with equal ease (b) PhLi adds to neither (c) PhLi reacts readily with 1 but does not add to 2 (d) PhLi reacts readily with 2 but does not add to 1
Solution. Answer: (c). PhLi adds to the exocyclic carbon of fulvene (1), giving a cyclopentadienyl anion (aromatic, 6 π e–), which is a stabilised intermediate. Addition to heptafulvene (2) would give a cycloheptatrienyl anion (8 π e–, antiaromatic), so it does not occur readily.
Teacher's Note: Nucleophilic addition is favoured when the new ring becomes aromatic.
Exam Note: Count π electrons of the ring anion formed.
Question 103. Major product expected from mono-bromination of phenyl benzoate (PhCOOPh): (a) Br ortho on the benzoyl ring (b) Br meta on the benzoyl ring (c) Br para on the benzoyl ring (d) Br para on the phenoxy ring
Solution. Answer: (d). The ring attached to the ester oxygen is activated by O lone pair (o/p-directing), while the benzoyl ring is deactivated by C=O. Bromine enters the phenoxy ring at the para position (less hindered than ortho).
Teacher's Note: Phenoxy ring reacts; para preferred.
Exam Note: Ring selection first, then para over ortho.
Question 104. The Birch reduction of benzoic acid gives: (a) cyclohexa-2,5-diene-1-carboxylic acid (COOH on an sp3 carbon) (b) cyclohexanecarboxylic acid (c) a 1,4-diene with COOH on a double-bonded carbon (d) cyclohexene carboxylic acid
Solution. Answer: (a). In Birch reduction (Na, liq. NH3, ROH) an electron-withdrawing group such as COOH stays on the sp3 carbon: reduction occurs at the ipso and para positions, giving 1,4-dihydrobenzoic acid (cyclohexa-2,5-dienecarboxylic acid).
Teacher's Note: EWG ends on sp3 carbon; EDG stays on sp2 carbon.
Exam Note: State the EWG/EDG rule for Birch reduction.
Question 105. Decreasing order of reactivity of m-nitrobromobenzene (I), 2,4,6-trinitrobromobenzene (II), p-nitrobromobenzene (III) and 2,4-dinitrobromobenzene (IV) towards HO–: (a) I > II > III > IV (b) II > IV > III > I (c) IV > II > III > I (d) II > IV > I > III
Solution. Answer: (b) II > IV > III > I. SNAr rate increases with the number of o/p nitro groups: II has three, IV has two, III has one (para), and I has only a meta NO2, which is not conjugated and gives little activation.
Teacher's Note: Count nitro groups ortho/para to Br.
Exam Note: Rank by number of o/p –NO2 groups.
Question 106. Which of the following tetracarboxylic acids form a di-anhydride? (a) benzene-1,2,3,4-tetracarboxylic acid (b) benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid) (c) neither (a) nor (b) (d) both (a) and (b)
Solution. Answer: (d). A dianhydride requires two pairs of ortho (adjacent) COOH groups. In (a) the pairs 1,2 and 3,4 can each dehydrate to a five-membered cyclic anhydride; in (b) the pairs 1,2 and 4,5 do the same (pyromellitic dianhydride).
Teacher's Note: Each anhydride ring needs two adjacent COOH groups.
Exam Note: Identify two separate ortho pairs.
Question 107. Salicylic acid + 2 ICl → (A). Unknown (A) is: (a) acid iodide with ring I (b) 3,5-dichlorosalicylic acid (c) 3,5-diiodosalicylic acid (d) 3,6-diiodosalicylic acid
Solution. Answer: (c). OH is a strong o/p-director. The two free positions ortho and para to OH (positions 3 and 5) are iodinated by the electrophile I+ from ICl (Iδ+–Clδ–), giving 3,5-diiodosalicylic acid. The ring is not chlorinated because I is the positive end.
Teacher's Note: ICl delivers I+; OH directs to 3 and 5.
Exam Note: Identify which atom of ICl is electrophilic.
Question 108. Aniline + Ph3COH (H+/D) → P (major; not an N-derivative). Product (P) is: (a) o-tritylaniline (b) p-tritylaniline (c) m-tritylaniline (d) triphenylbenzene
Solution. Answer: (b). Acid ionises triphenylmethanol to the very stable trityl cation, which attacks the activated aniline ring in a Friedel–Crafts-type reaction at the para position (the ortho position is blocked by the bulk of the trityl group), giving p-tritylaniline.
Teacher's Note: Huge electrophile attacks para only.
Exam Note: Trityl cation: stable, bulky, para-selective.
Question 109. Deduce structure of (A): (A) C8H10 → (KMnO4) (B) C8H6O4 → (Br2, Fe) C8H5BrO4 (C) (one product only). (a) ethylbenzene (b) p-xylene (c) m-xylene (d) o-xylene
Solution. Answer: (b). B, C8H6O4, is a benzenedicarboxylic acid. Terephthalic acid (from p-xylene) has four equivalent ring hydrogens, so monobromination gives only one product; phthalic and isophthalic acid give two and three isomers respectively.
Teacher's Note: Equivalent ring hydrogens mean a single monobromo product.
Exam Note: Check symmetry: one product means para.
Question 110. Deamination of Ph2C(OH)CH2NH2 with NaNO2–HCl gives a product (P), which on oxidation gives benzoic acid only. Identify (P). (a) PhCH2CH2Ph (b) PhCOCH2Ph (c) PhCOCOPh (d) PhCH2NHPh
Solution. Answer: (b). The diazonium ion loses N2 and a phenyl group migrates from the carbinol carbon (semipinacol / Tiffeneau–Demjanov-type rearrangement), forming Ph–CO–CH2–Ph (deoxybenzoin). Oxidative cleavage gives only benzoic acid because both fragments are phenyl-bearing carbons.
Teacher's Note: Semipinacol rearrangement: aryl shift with loss of N2.
Exam Note: Show aryl migration to the CH2 carbon.
Question 111. PhCO2H → (SOCl2) A → (Me2NH) B → (C) PhCHO. The unknown reagent (C) is: (a) LiAlH4 (b) NaBH4 (c) LiAlH4(t-BuO)3 (d) PCC/CH2Cl2
Solution. Answer: (c) (from key). A is benzoyl chloride and B is N,N-dimethylbenzamide. A hindered, less reactive hydride reagent stops the reduction at the aldehyde stage (via the tetrahedral intermediate that collapses only on work-up); NaBH4 does not reduce amides, LiAlH4 would give the amine, and PCC is an oxidant.
Teacher's Note: Mild hindered hydride reduces the amide to the aldehyde.
Exam Note: Pick a reagent that does not over-reduce.
Question 112. 1,2,4-Triethylbenzene + CH3COCl/AlCl3 → (A) (80%); (A) + NH2NH2, NaOH, triethylene glycol, heat → (B) (73%). Product (B) is: (a) 1,2,3,4-tetraethylbenzene (b) 1,2,4,5-tetraethylbenzene (c) 1,2,3,5-tetraethylbenzene (d) 1,3,5-triethyl-2-methyl-type isomer
Solution. Answer: (b). Acetylation enters position 5 (ortho to the ethyl at C4, para to the ethyl at C2), the least hindered free position. Wolff–Kishner reduction converts COCH3 into CH2CH3, giving 1,2,4,5-tetraethylbenzene.
Teacher's Note: Pick the least hindered, doubly activated ring position.
Exam Note: Acylation then Wolff–Kishner adds an ethyl group.
Question 113. C6H5(CH2)5COCl + AlCl3/CS2 → (A) C12H14O; (A) + KMnO4, Δ; H3O+ → (B). Compound (B) is: (a) PhCO(CH2)4CO2H (b) benzoic acid (c) phthalic acid (benzene-1,2-dicarboxylic acid) (d) phthalic anhydride
Solution. Answer: (c). Intramolecular Friedel–Crafts acylation at the ortho position closes a ring, giving a benzo-fused cyclic ketone, C12H14O (A). Vigorous oxidation by KMnO4 cleaves all the ring carbons attached to the benzene ring down to COOH, giving phthalic acid (the two ortho substituents each become –COOH).
Teacher's Note: Ortho-fused ring oxidises to the ortho-dicarboxylic acid.
Exam Note: Show ring closure first, then side-chain oxidation.
Question 114. Nitration of C6H5R gives the ortho and para nitro products. The o/p ratio will be highest when: (a) R = –CH3 (b) R = –CH2CH3 (c) R = –CH(CH3)2 (d) R = –C(CH3)3
Solution. Answer: (a). Steric hindrance to ortho attack increases with the size of R (CH3 < Et < i-Pr < t-Bu), so the o/p ratio falls in that order. CH3 is smallest, so toluene gives the highest o/p ratio (about 1.5 : 1 to 2 : 1 ortho : para).
Teacher's Note: Bigger R means more para; smaller R means higher o/p ratio.
Exam Note: Link o/p ratio to steric size of R.
Question 115. 4-Hydroxybenzoic acid + HNO3 → (1); base, n-PrCl → (2); SOCl2 → (3); (1) Et2NH, (2) H2/Pd → (4). Product (4) is: (a) 3-nitro-4-propoxy-N,N-diethylbenzamide (b) 3-amino-4-propoxy-N,N-diethylbenzamide (c) 3-amino-4-propoxy-N-ethylbenzamide (d) 2-nitro-4-propoxy-N,N-diethylbenzamide
Solution. Answer: (b). (1) = 4-hydroxy-3-nitrobenzoic acid (nitration ortho to OH). (2) = 4-propoxy-3-nitrobenzoic acid (Williamson ether). (3) = acid chloride. Et2NH gives the N,N-diethylamide and H2/Pd reduces NO2 to NH2, so (4) = 3-amino-4-propoxy-N,N-diethylbenzamide.
Teacher's Note: Follow the sequence one reagent at a time.
Exam Note: Name intermediates (1) to (3).
Question 116. Bromobenzene + 2,5-dichloro-2,5-dimethylhexane/AlCl3 → (A). Product (A) is: (a) 5-bromo-1,1,4,4-tetramethyltetralin with Br adjacent to the ring junction (b) 6-bromo-1,1,4,4-tetramethyltetralin (c) the unbrominated tetramethyltetralin (d) a tetralin with Br on the saturated ring
Solution. Answer: (b). The dichloride forms tertiary cations that alkylate twice on the ring, closing the six-membered ring. Bromine is an o/p-director and the second alkylation is directed away from the bulky t-alkyl group already attached, so the Br ends up at position 6 of the tetralin, not next to the quaternary carbon.
Teacher's Note: Two tertiary cations make the ring; sterics decide the position.
Exam Note: Show double Friedel–Crafts ring closure.
Question 117. PhCHO + 2 C6H6 (H2SO4) → major product: (a) Ph3CH (b) Ph3COH (c) p-(Ph2CH)–C6H4–R type ring-substituted compound (d) Ph2CH2
Solution. Answer: (a). Acid protonates PhCHO; the cation attacks benzene (Friedel–Crafts) to give Ph2CHOH, which ionises to Ph2CH+; this attacks a second benzene molecule, giving triphenylmethane, Ph3CH, and water.
Teacher's Note: Aldehyde carbon bonds to two benzene rings, loses O as water.
Exam Note: Two successive Friedel–Crafts alkylations.
Question 118. Aniline + Br–CH2CH2CH2–Cl → (A). Product (A) is: (a) 1,2,3,4-tetrahydroisoquinoline (b) 1,2,3,4-tetrahydroquinoline (c) indoline (d) Ph–CH2CH2CH2Cl
Solution. Answer: (b) (from key). The nucleophilic N of aniline displaces the more reactive Br; the three-carbon chain then closes onto the ring ortho carbon, giving the six-membered N-containing ring of 1,2,3,4-tetrahydroquinoline (N–H attached to the aromatic ring).
Teacher's Note: Better leaving group (Br) reacts first; ring closure gives a 6-ring.
Exam Note: Br is more reactive than Cl in substitution.
Question 119. m-Dinitrobenzene + HNO3/H2SO4 (five days to complete) → (X). Compound (X) is: (a) 1,2,4-trinitrobenzene (b) 1,3,5-trinitrobenzene (c) 1,2,3-trinitrobenzene (d) trinitrotoluene (TNT)
Solution. Answer: (b). Both NO2 groups direct the new NO2 to the position meta to each, i.e. C5. The ring is strongly deactivated, so the reaction is very slow (five days), giving 1,3,5-trinitrobenzene.
Teacher's Note: Two meta directors reinforce at C5.
Exam Note: Note the strongly deactivated ring is very slow.
Question 120. γ-Butyrolactone → (i) HCl, (ii) SOCl2 → (A); (A) + PhH/AlCl3 → (B); (B) + KOH/MeOH → (C). Compound (C) is: (a) PhCH2–CO–cyclopropyl (b) PhCH=CH–CO–CH3 (c) Ph–CO–cyclopropyl (cyclopropyl phenyl ketone) (d) Ph–CO–CH=CH–CH3
Solution. Answer: (c). HCl opens the lactone to 4-chlorobutanoic acid and SOCl2 gives 4-chlorobutanoyl chloride (A). Friedel–Crafts acylation of benzene gives 4-chloro-1-phenylbutan-1-one (B). With KOH the α-carbon enolate displaces the terminal Cl (intramolecular 3-exo-tet alkylation), closing a cyclopropane ring: cyclopropyl phenyl ketone (C).
Teacher's Note: γ-Halo ketone + base gives cyclopropane by intramolecular alkylation.
Exam Note: Name A, B and the 3-membered ring closure.
Question 121. Phthalic anhydride + C6H6/AlCl3 → (A); (i) PCl5, (ii) H2/Pd–BaSO4 → (B); NH2NH2 → (C). Compound (C) is: (a) phthalazine (unsubstituted) (b) 1-phenylphthalazine (c) 5-phenylphthalazine (d) stilbene PhCH=CHPh
Solution. Answer: (b). A = 2-benzoylbenzoic acid. PCl5 converts COOH to COCl and Rosenmund reduction (H2/Pd–BaSO4) converts it to CHO, giving 2-benzoylbenzaldehyde (B). Hydrazine condenses with both C=O groups to form the fused diazine ring, 1-phenylphthalazine (C).
Teacher's Note: Acid, then acid chloride, then aldehyde; hydrazine closes the ring.
Exam Note: Rosenmund stops at the aldehyde.
Question 122. Resorcinol (1,3-dihydroxybenzene) + (i) aq. NaHCO3, boil; H3O+ → (A) (major). Product (A) is: (a) 2,4-dihydroxybenzaldehyde (b) 2,4-dihydroxybenzoic acid (β-resorcylic acid) (c) 1,2,4-trihydroxybenzene (d) no reaction
Solution. Answer: (b). Boiling resorcinol with aqueous bicarbonate carboxylates the ring (a Kolbe-type carboxylation using HCO3–/CO2), at the position ortho to one OH and para to the other, giving 2,4-dihydroxybenzoic acid on acidification.
Teacher's Note: Highly activated ring carboxylates even with bicarbonate.
Exam Note: Position: ortho/para to both OH groups.
Question 123. In the diaryl-iodonium ion shown (a 4-nitrophenyl group and a phenyl group both bonded to I+; positions i, ii, iii marked on the nitro-substituted ring and iv on the other ring), identify the position where attack of ArO– is favourable. (a) i (b) ii (c) iii (d) iv
Solution. Answer: (c) iii (from key). The nucleophile attacks the ring carbon that bears I+ (ipso substitution, the iodonium group leaves as ArI). The ring carrying the electron-withdrawing NO2 group (para to I) is more electron-poor, so ipso attack occurs on that ring, at the carbon marked iii.
Teacher's Note: Iodonium is a super-leaving group; attack ipso on the more electron-poor ring.
Exam Note: Attack ipso on nitro-substituted ring.
Question 124. Bis(2-nitrophenyl) disulfide + Cl2 → (A). Product (A) is: (a) 2-nitrothiophenol (b) 2-nitrobenzenesulfenyl chloride (ArS–Cl) (c) 4-nitrothiophenol (d) 3-nitro-substituted thiophenol
Solution. Answer: (b). Chlorine cleaves the S–S bond: ArS–SAr + Cl2 → 2 ArSCl. Here Ar = 2-nitrophenyl, giving 2-nitrobenzenesulfenyl chloride.
Teacher's Note: Halogens cleave disulfides to sulfenyl halides.
Exam Note: Show S–S cleavage; position of NO2 unchanged.
Question 125. Acetophenone + HNO3/H2SO4 → (A); (A) + Zn(Hg)/HCl → (B). Product (B) is: (a) 1-ethyl-3-nitrobenzene (b) 3-ethylaniline (c) 4-nitroacetophenone (d) 1-ethyl-2-nitrobenzene
Solution. Answer: (b). Acetyl is a meta-director, so (A) = 3-nitroacetophenone. Zn(Hg)/HCl (Clemmensen conditions) reduces the C=O to CH2 and also reduces the nitro group (metal/HCl) to NH2, giving 3-ethylaniline.
Teacher's Note: Zn(Hg)/HCl reduces both C=O and NO2.
Exam Note: Both functional groups are reduced.
Question 126. Toluene + HN=CH–Cl (HCl and HCN, AlCl3) → (A); H3O+ → (B). Product (B) is: (a) m-tolualdehyde (b) p-tolualdehyde (4-methylbenzaldehyde) (c) no reaction (d) acetophenone
Solution. Answer: (b). This is the Gattermann reaction (formylation); the electrophile is the iminium species HC+=NH, which attacks para to CH3, giving the aldimine; hydrolysis gives p-tolualdehyde.
Teacher's Note: Gattermann formylation; para to the alkyl group.
Exam Note: Name Gattermann; iminium then hydrolysed.
Question 127. 1-Naphthylacetic acid → (EtOH, H+) → (i) NaH; (ii) MeI → (i) NaOH; (ii) H+ → (i) SOCl2; (ii) AlCl3 → end product: (a) a cyclopenta-fused naphthalene ketone, ring closed at C2 (b) acenaphthene derivative without C=O (c) 2-methylacenaphthen-1-one (five-membered ring bridging C1 and the peri position C8, C=O on the ring side) (d) acenaphthenequinone
Solution. Answer: (c) (from key). Esterification, then NaH/MeI methylates the α-carbon: ester of 2-(1-naphthyl)propanoic acid; hydrolysis gives the acid. The acid chloride then undergoes intramolecular Friedel–Crafts acylation at the peri position (C8), forming a five-membered ring: 2-methylacenaphthen-1-one.
Teacher's Note: Peri position closes a five-membered ring.
Exam Note: Methylation, hydrolysis, then peri cyclisation.
Question 128. Ph–NH2 + CH3Cl (2 mole) → (A); (A) + PhN2+Cl– → (B) (major), butter yellow. Product (B) is: (a) o-(Me2N)C6H4–N=N–Ph (b) m-isomer (c) p-(Me2N)C6H4–N=N–Ph (d) a quaternary N-azo salt
Solution. Answer: (c). Two moles of CH3Cl give N,N-dimethylaniline (A). Azo coupling with the benzenediazonium ion occurs at the para position of the strongly activated ring, giving 4-(dimethylamino)azobenzene, the dye 'butter yellow'.
Teacher's Note: Tertiary aromatic amines couple para to NMe2.
Exam Note: Dimethylation first; then C-coupling para.
Question 129. p-Toluidine reacts with benzenediazonium chloride to form a compound (Ph–N=N–NH–C6H4CH3), which on boiling with aq. H2SO4 gives ......... products: (a) 3 (b) 2 (c) 4 (d) 5
Solution. Answer: (c) 4 (from key). The diazoamino compound (a triazene) is cleaved by acid in both directions. One way gives PhN2+ (→ phenol + N2) and p-toluidine; the other way gives p-CH3C6H4N2+ (→ p-cresol + N2) and aniline. The organic products are phenol, p-cresol, aniline and p-toluidine (four), with N2 as gas.
Teacher's Note: Triazene splits both ways in acid.
Exam Note: Count organic products from both cleavage modes.
Question 130. p-Chloronitrobenzene → (aq NH3) (A) → (Br2/H2O) (B) → (i) NaNO2/HCl, (ii) H3PO2 (C). Product (C) is: (a) 3,4-dibromonitrobenzene (b) 3,5-dibromonitrobenzene (c) 2,3-dibromonitrobenzene (d) 2,4-dibromonitrobenzene
Solution. Answer: (b). SNAr with NH3 replaces Cl: (A) = p-nitroaniline. Bromination goes ortho to the strongly activating NH2: (B) = 2,6-dibromo-4-nitroaniline. Diazotisation and H3PO2 remove the NH2, giving 3,5-dibromonitrobenzene (C).
Teacher's Note: Use NH2 as a temporary director, then remove it with H3PO2.
Exam Note: Track A, B and C stepwise.
Question 131. Benzene + Fe2+/H2O2 (Fenton's reagent) → (A); (A) + Br2/H2O (≈100%) → (B). Major product (B) is: (a) o-bromophenol (b) m-bromophenol (c) p-bromo-substituted benzene (d) 2,4,6-tribromophenol
Solution. Answer: (d). Fenton's reagent generates HO• radicals, which hydroxylate benzene to phenol (A). Bromine water brominates the very reactive phenol at all three o/p positions, giving 2,4,6-tribromophenol (white precipitate) in about 100% yield.
Teacher's Note: Phenol with Br2/H2O is not stopped at mono-substitution.
Exam Note: Name Fenton hydroxylation then tribromination.
Question 132. 1,4-Dibromo-2-nitrobenzene (Br ortho and Br meta to NO2) + HO– → (A). Product (A) is: (a) 4-bromo... OH replacing the meta Br (b) 2-hydroxy... OH replacing the ortho Br, with the other Br retained (c) a tribrominated hydroxy compound (d) isomer with OH meta to NO2
Solution. Answer: (b). SNAr is possible only at the halogen ortho or para to NO2. Here the Br ortho to NO2 is replaced by OH (via the Meisenheimer complex stabilised by NO2), while the Br meta to NO2 stays.
Teacher's Note: Only the o/p halogen to NO2 is displaced.
Exam Note: Locate each Br relative to NO2.
Question 133. Aniline → (Ac2O) (A) → (HNO3/H2SO4) (B) → (H+/H2O) (C). Product (C) is: (a) m-nitroaniline (b) p-nitroaniline (c) m-dinitrobenzene (d) p-dinitrobenzene
Solution. Answer: (b). Acetylation (A = acetanilide) protects the NH2 from oxidation/protonation and keeps it o/p-directing. Nitration gives mainly p-nitroacetanilide (B), and acid hydrolysis of the amide gives p-nitroaniline (C).
Teacher's Note: Protect NH2 as the amide; nitrate; deprotect.
Exam Note: Say why direct nitration of aniline is avoided.
Question 134. Nitrobenzene + Br2 (2 mole)/Fe → (A) (major). Product (A) will be: (a) 3,4-dibromonitrobenzene (b) 3,5-dibromonitrobenzene (c) 2,4-dibromonitrobenzene (d) 2,3-dibromonitrobenzene
Solution. Corrected: the printed key gives (a), but the correct answer is (b). NO2 is a meta-director, so the first Br goes to C3 (m-bromonitrobenzene). The positions the Br at C3 would favour (2, 4, 6) are all ortho/para to the strongly deactivating NO2, so the second Br goes meta to NO2 at C5, giving 3,5-dibromonitrobenzene (1,3-dibromo-5-nitrobenzene).
Teacher's Note: NO2 outweighs Br: both Br atoms end up meta to NO2.
Exam Note: Compare directing power: strong deactivator wins.
Question 135. Ethylbenzene → (i) HNO3, (ii) H2SO4 → (A) (dinitro product) → KMnO4/Δ (B) → SOCl2 (C). Product (C) is: (a) 2,5-dinitrobenzoyl chloride type (b) 2,4-dinitrobenzoyl chloride (c) 2,4-dinitroethylbenzene (d) 2,3-dinitroethylbenzene
Solution. Answer: (b). Dinitration of ethylbenzene puts the NO2 groups ortho and para to the ethyl group: (A) = 2,4-dinitroethylbenzene. KMnO4 oxidises the ethyl side chain to COOH: (B) = 2,4-dinitrobenzoic acid. SOCl2 converts it to the acid chloride (C), 2,4-dinitrobenzoyl chloride.
Teacher's Note: Ethyl is o/p-directing; oxidation then converts it to COOH.
Exam Note: Name A, B, C in order.
Question 136. p-Chloronitrobenzene + (CH3)2NH → (A); Fe/HCl → (B). Product (B) is: (a) N,N-dimethyl-p-phenylenediamine (4-amino-N,N-dimethylaniline) (b) the meta isomer (c) the ortho isomer (d) none of these
Solution. Answer: (a). Dimethylamine displaces Cl by SNAr (activated by the para NO2), giving N,N-dimethyl-4-nitroaniline (A). Fe/HCl reduces NO2 to NH2, giving 4-(dimethylamino)aniline (B).
Teacher's Note: SNAr first, then reduce nitro to amine; the positions stay para.
Exam Note: Para NO2 makes Cl replaceable.
Question 137. (A) → (i) SOCl2, (ii) NH3 → (B) → Br2 + KOH → o-aminophenol. Which of the following compounds gives reactant (A) on hydrolysis? (a) an ester of 2-nitrobenzoic acid with 2-hydroxy... (b) 2-nitrophenyl salicylate (salicylic acid ester of 2-nitrophenol) (c) 4-nitrophenyl benzoate (d) 3-nitrobenzoate ester of 3-hydroxyphenol
Solution. Answer: (b). o-Aminophenol comes from Hofmann degradation of salicylamide (B), so (A) is salicylic acid (2-hydroxybenzoic acid; acid chloride then NH3 gives the amide). Hydrolysis of 2-nitrophenyl salicylate gives salicylic acid and 2-nitrophenol.
Teacher's Note: Work backwards: Hofmann loses one C, so the acid is salicylic acid.
Exam Note: Retrosynthesis: amine from amide with one more carbon.
Question 138. 6-Methoxy-1,2,3,4-tetrahydronaphthalene + HNO3/H2SO4 → (A). Product (A) is: (a) nitro at the carbon between OMe and the ring fusion (b) nitro on a naphthalene ring (aromatised) (c) nitro ortho to OCH3, on the carbon away from the saturated ring (position 7) (d) nitro on the saturated ring
Solution. Answer: (c). OCH3 is the strongest director, activating its ortho and para positions. The para position is blocked by the fused ring system, so nitration occurs ortho to OCH3; of the two ortho carbons the one away from the saturated ring (position 7) is less hindered.
Teacher's Note: Strong donor directs; pick the less hindered ortho site.
Exam Note: Para blocked, choose the less crowded ortho position.
Question 139. N-(4-Methylphenyl)acetamide (p-methylacetanilide) + Br2/CS2 → product: (a) Br ortho to CH3 (b) side-chain bromination of COCH3 (c) benzylic bromination of ring CH3 (d) Br ortho to NHCOCH3 (meta to CH3)
Solution. Answer: (d). The acetamido group is a stronger activator than CH3, so it controls the position of substitution. Its para position is blocked by CH3, so bromine enters ortho to NHCOCH3. CS2 is a non-polar solvent without light, so no radical side-chain bromination occurs.
Teacher's Note: Stronger director controls; para blocked, so ortho.
Exam Note: Compare NHAc versus CH3 for directing power.
Question 140. p-Nitrophenol + H2/Pd → (A); (A) + acetic anhydride → (B) paracetamol. Product (B) is: (a) 4-aminophenyl acetate (b) N-(4-hydroxyphenyl)acetamide (c) 2-acetyl-4-aminophenol (d) 4-aminophenol
Solution. Answer: (b). H2/Pd reduces NO2 to NH2: (A) = p-aminophenol. The more nucleophilic NH2 is acetylated by acetic anhydride in preference to OH, giving paracetamol, 4-HO–C6H4–NHCOCH3.
Teacher's Note: N-acylation beats O-acylation with aminophenols.
Exam Note: Name A and chemoselective N-acetylation.
Question 141. Benzene + succinic anhydride (AlCl3, 2.2 equivalents) → (A); (A) + Zn(Hg)/HCl → (B); (B) + H3PO4 → (C). Product (C) is: (a) 2-tetralone (b) 1-tetralone (c) 1-tetralol (d) 2-tetralol
Solution. Answer: (b). A = 3-benzoylpropanoic acid (the extra AlCl3 is needed because both C=O groups complex it). Clemmensen reduction gives B = 4-phenylbutanoic acid. H3PO4 causes intramolecular Friedel–Crafts acylation, closing a six-membered ring: 1-tetralone (C).
Teacher's Note: Acylate, reduce, cyclise: the classic route to 1-tetralone.
Exam Note: Haworth synthesis steps.
Question 142. Benzene + (CH3)2C=CH–CO2H (3-methylbut-2-enoic acid), AlCl3 → product (82% yield). Product of this Friedel–Crafts reaction is: (a) 2-methyl-... aryl on the CH carbon with isopropyl (b) the acyl compound PhCO–CH=C(CH3)2 (c) 3-methyl-3-phenylbutanoic acid, PhC(CH3)2CH2CO2H (d) tert-butylbenzene
Solution. Answer: (c). The acid is protonated at the β-carbon (the alkene carbon not bearing CO2H) to form the tertiary carbocation (CH3)2C+–CH2CO2H (Markovnikov), which alkylates benzene: PhC(CH3)2CH2CO2H.
Teacher's Note: Alkene protonation gives the tertiary cation; alkylation beats acylation here.
Exam Note: Name the tertiary carbocation intermediate.
Question 143. Which of the 2-halonitrobenzenes is most reactive towards nucleophilic aromatic substitution? (a) 2-fluoronitrobenzene (b) 2-chloronitrobenzene (c) 2-bromonitrobenzene (d) 2-iodonitrobenzene
Solution. Answer: (a). In SNAr the rate-determining step is nucleophilic attack to form the Meisenheimer complex; the highly electronegative F makes the attacked carbon most electron-poor and stabilises the complex, so reactivity is F > Cl > Br > I.
Teacher's Note: SNAr rate order is reverse of leaving ability in SN1/SN2.
Exam Note: Attack, not C–X breaking, is the slow step.
Question 144. Choose the best method to prepare p-tert-butylnitrobenzene, p-(CH3)3C–C6H4–NO2: (a) (1) HNO3 + H2SO4; (2) Me3CCl/AlCl3 (b) (1) Me3CCl/AlCl3; (2) HNO3/H2SO4 (c) (1) (CH3)2CH–CH2Cl/AlCl3; (2) HNO3/H2SO4 (d) (1) HNO3/H2SO4; (2) isobutyl chloride/AlCl3
Solution. Answer: (b). Alkylate first: tert-butyl chloride gives tert-butylbenzene, then nitration goes mainly para (the bulky t-Bu blocks ortho). (a) and (d) fail because Friedel–Crafts does not work on nitrobenzene. (c) would give tert-butylbenzene by rearrangement anyway but starting from isobutyl chloride is inferior.
Teacher's Note: Friedel–Crafts must precede nitration; t-Bu blocks ortho.
Exam Note: Order of steps: alkylation before nitration.
Question 145. Toluene → (HNO3/H2SO4) (A) (para isomer) → (H2/Pd–C) (B) → (KMnO4) (C) → (EtOH/H+) (D). Benzocaine has been used as a component of appetite suppressants, burn and sunburn remedies. Benzocaine is: (a) ethyl 3-aminobenzoate (b) ethyl 4-aminobenzoate (c) a phthalimide-type compound (d) 4-ethoxyaniline
Solution. Answer: (b). A = p-nitrotoluene; B = p-toluidine; C = p-aminobenzoic acid (side-chain oxidation); D = its ethyl ester by Fischer esterification: ethyl 4-aminobenzoate, benzocaine.
Teacher's Note: Para sequence is kept throughout; final step is esterification.
Exam Note: Name the final Fischer esterification.
Question 146. 2-Methoxyphenol (guaiacol) + HBr, Δ → (A) (86%). Product (A) is: (a) 4-bromo... a bromophenol (b) 2-bromoanisole (c) catechol (1,2-dihydroxybenzene) (d) a bromomethyl ether
Solution. Answer: (c). HBr cleaves the aryl alkyl ether at the CH3–O bond (Br– attacks the methyl carbon, SN2), giving CH3Br and the phenol. The aryl C–O bond does not cleave, so the product is catechol.
Teacher's Note: Aryl alkyl ethers cleave at the alkyl–O bond.
Exam Note: Name CH3Br as co-product.
Question 147. 1,2,3-Trimethoxybenzene + HI (excess), Δ → product. Predict the major product: (a) pyrogallol (1,2,3-trihydroxybenzene) (b) 1,2,3-triiodobenzene (c) 3-methylphenol-type compound (d) a hypoiodite O–I derivative
Solution. Answer: (a). Excess HI cleaves each aryl methyl ether (I– attacks CH3 in an SN2 step) to give CH3I and the phenol; the aryl C–O bonds are not broken, so all three OCH3 groups become OH, giving pyrogallol.
Teacher's Note: HI cleaves the O–CH3 bond only.
Exam Note: Aryl–O bond stays intact.
Question 148. Phenol + HNO2/HNO3 → (A) (major). Product (A) is: (a) p-nitrosophenol (b) o-nitrophenol (c) p-nitrophenol (d) m-nitrophenol
Solution. Answer: (c). Nitrous acid (present with, or formed from, HNO3) nitrosates phenol at the para position to give p-nitrosophenol; HNO3 then oxidises the NO group to NO2, so the major isolated product is p-nitrophenol.
Teacher's Note: Nitrosation para, then oxidation of NO to NO2.
Exam Note: Give two-step nitrosation–oxidation route.
Question 149. Arrange in decreasing order of rate in SNAr: (i) 4-chloronitrobenzene, (ii) 3-chloronitrobenzene, (iii) 2,4-dinitrochlorobenzene, (iv) chlorobenzene, (v) 2,4,6-trinitrochlorobenzene (picryl chloride). (a) i > ii > iv > iii > v (b) ii > i > iii > v > iv (c) v > iii > i > ii > iv (d) v > iii > ii > i > iv
Solution. Answer: (c) v > iii > i > ii > iv. Each NO2 ortho/para to Cl stabilises the Meisenheimer complex: v has three, iii has two, i has one (para), ii has only a meta NO2 (weak inductive effect), and chlorobenzene has none.
Teacher's Note: Count o/p nitro groups; meta nitro only helps inductively.
Exam Note: Rank by number of o/p NO2 groups.
Question 150. Which one of the following compounds undergoes bromination of its aromatic ring (electrophilic aromatic substitution) at the fastest rate? (a) tetralin (b) 1,2,3,4-tetrahydroquinoline (N–H on the ring) (c) 1,2,3,4-tetrahydroisoquinoline (d) 3,4-dihydroisoquinolin-1(2H)-one (lactam)
Solution. Answer: (b). The NH lone pair of tetrahydroquinoline is conjugated with the benzene ring (strong +M), so its ring is the most activated. Tetralin has only alkyl activation, tetrahydroisoquinoline has N insulated from the ring by CH2, and the lactam has a deactivating C=O on the ring.
Teacher's Note: Directly attached N lone pair is the strongest activator.
Exam Note: Check which atom is conjugated with the ring.
Download MS Chauhan Solutions for JEE Math PDF
Complete Math Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 12 Aromatic Compounds Part 1
Review detailed solutions for JEE Mathematics. The MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 12 Aromatic Compounds Part 1 PDF provides comprehensive answers mapped to standard MS Chauhan Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Complete Your JEE Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.