Download JEE Chemistry MS Chauhan Textbook Solutions: Chapter 12 Aromatic Compounds
Explore reliable textbook solutions for Chapter 12 Aromatic Compounds tailored for JEE learners using MS Chauhan methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access MS Chauhan Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Aromatic Compounds - Level 1 Questions 151 to 216, Level 2 and Subjective Problems
Level 1 - Questions 151 to 216 (answers from the book's answer key)
Question 151. What is the product of the following reaction? Anisole (C6H5OCH3) + α-methylstyrene (C6H5C(CH3)=CH2), H2SO4 →
(a) C6H5CH(CH3)CH2–C6H4–OCH3 (para); (b) (CH3)2CH–C6H4 biphenyl with OCH3 on the ortho position of the other ring; (c) C6H5CH(CH3)CH2–C6H4–OCH3 (ortho); (d) (CH3)2CH–C6H4–C6H4–OCH3 (para, para′ biphenyl).
Solution. Book key: (d). Corrected: none of the printed options is chemically sound. H+ adds to the CH2 end of α-methylstyrene to give the stable tertiary benzylic cumyl cation C6H5C+(CH3)2. This attacks anisole at the para position (OCH3 is o/p-directing) to give 4-(2-phenylpropan-2-yl)anisole, C6H5C(CH3)2–C6H4–OCH3. Options (a) and (c) need an anti-Markovnikov primary cation; (b) and (d) contain a biaryl bond that cannot form here.
Teacher's Note: Protonation gives the most stable (tertiary benzylic) cation, which alkylates anisole para.
Exam Note: Name the cation first; check the alkene regiochemistry.
Question 152. Which sequence represents the best synthesis of 4-isopropylbenzonitrile?
(a) 1. Benzene + (CH3)2CHCl, AlCl3; 2. Br2, FeBr3; 3. KCN
(b) 1. Benzene + (CH3)2CHCl, AlCl3; 2. HNO3, H2SO4; 3. Fe, HCl; 4. NaOH; 5. NaNO2, HCl, H2O
(c) 1. Benzene + (CH3)2CHCl, AlCl3; 2. HNO3, H2SO4; 3. Fe, HCl; 4. NaNO2/HCl; 5. KCN
(d) 1. Benzene + HNO3, H2SO4; 2. (CH3)2CHCl, AlCl3; 3. Fe, HCl; 4. NaNO2, HCl, H2O; 5. CuCN
Solution. Answer (from key): (c). Alkylation first gives cumene; nitration puts NO2 mainly para (bulky isopropyl); Fe/HCl gives the amine; diazotisation and cyanide displacement (Sandmeyer type) give the nitrile. (a) cannot replace an aryl bromide by KCN; (b) has no CN step; (d) fails at step 2 because Friedel–Crafts alkylation does not work on strongly deactivated nitrobenzene. (Strictly the cyanide step is done with CuCN; (c) is still the only workable order.)
Teacher's Note: Friedel–Crafts fails on nitrobenzene, so alkylate first, then nitrate, reduce, diazotise, cyanate.
Exam Note: Order of steps decides the marks; justify why (d) fails.
Question 153. o-Bromotoluene → (1. Mg/ether; 2. H3O+; 3. KMnO4/OH–; 4. H+) → A. Product A is:
(a) 2-hydroxybenzoic acid; (b) 2-methylphenol; (c) benzoic acid; (d) benzene.
Solution. Answer (from key): (c). Mg/ether gives the Grignard reagent of toluene; H3O+ protonates it to toluene (Br removed); hot alkaline KMnO4 oxidises the CH3 to COO–; H+ gives benzoic acid, C6H5COOH.
Teacher's Note: Grignard + water removes the halogen; side-chain CH3 is then oxidised to COOH.
Exam Note: Write each intermediate: toluene, then benzoate, then acid.
Question 154. Naphthalene → (1. Air, V2O5, Δ; 2. NH3, Δ; 3. KOBr, Δ) → A. Product A is:
(a) phthalimide; (b) 2-aminobenzoic acid (anthranilic acid); (c) 2-carbamoylbenzoic acid; (d) a naphthalene-fused cyclic imide.
Solution. Answer (from key): (b). V2O5/air oxidises naphthalene to phthalic anhydride; NH3/heat gives phthalimide; KOBr (Hofmann bromamide degradation) converts one C=O–N unit into the amine, giving anthranilic acid, 2-H2N–C6H4–COOH.
Teacher's Note: Naphthalene → phthalic anhydride → phthalimide → Hofmann gives anthranilic acid.
Exam Note: Name all three intermediates; Hofmann loses one carbon.
Question 155. What is the correct order of rate of nitration of: A = C6H5CH3, B = C6H6, C = C6D6, D = C6T6, E = C6H5Br, F = C6H5N+R3, G = C6H5NMe2?
(a) G > A > B > C > D > E > F; (b) G > B > C > D > A > F; (c) G > A > B = C = D > E > F; (d) G > A > B > C = D > E > F
Solution. Answer (from key): (c). NMe2 is a strong activator, CH3 a weak activator, Br deactivates (–I > +M) and N+R3 deactivates strongly. In nitration the C–H (C–D, C–T) bond breaks after the slow step, so there is no primary isotope effect: C6H6, C6D6, C6T6 react at the same rate.
Teacher's Note: Rate-determining step is attack by NO2+; C–H cleavage is fast, so no isotope effect.
Exam Note: State no kinetic isotope effect in nitration; rank substituents.
Question 156. Naphthalene + oxalyl chloride (ClCO–COCl) → (AlCl3) [X] → (excess Na–Hg, HCl) [Y]. Product Y is:
(a) a cyclobutane ring fused linearly to naphthalene (as drawn); (b) a cyclobutane ring fused angularly (as drawn); (c) acenaphthene (five-membered CH2–CH2 ring bridging the peri positions 1 and 8); (d) acenaphthylene (five-membered ring with C=C bridging peri positions).
Solution. Answer (from key): (c). Double Friedel–Crafts acylation at the peri positions (C-1 and C-8) gives acenaphthenequinone X (a five-membered 1,2-diketone ring). Clemmensen-type reduction (Na–Hg/HCl, excess) converts both C=O to CH2, giving acenaphthene Y.
Teacher's Note: Peri positions close a five-membered ring; reduction of both C=O gives acenaphthene.
Exam Note: Know acenaphthenequinone as X; both C=O reduced to CH2.
Question 157. Compound A (C7H8O) is insoluble in water, dilute HCl and aqueous NaHCO3, but dissolves in dilute NaOH. When A is treated with Br2 water it is converted rapidly into a compound C7H5OBr3. The structure of A is:
(a) anisole; (b) o-cresol; (c) m-cresol; (d) p-cresol.
Solution. Answer (from key): (c). Dissolving in NaOH but not NaHCO3 shows a phenol, so anisole is out. Three Br atoms enter positions ortho/para to OH. In m-cresol the three activated positions (2, 4, 6) are all free, giving 2,4,6-tribromo-3-methylphenol, C7H5OBr3. o- and p-Cresol have only two free activated positions and give dibromo products.
Teacher's Note: Tribromination needs three free o/p positions to OH; only m-cresol has them.
Exam Note: Link NaOH solubility to phenol, then count free ortho/para sites.
Question 158. Give the product of the reaction sequence: benzene → 1. HNO3/H2SO4; 2. H2/Pd/C; 3. NaNO2/HCl; 4. CuCN; 5. MeMgBr; 6. H3O+ → Product.
(a) benzoic acid; (b) acetophenone; (c) phenylacetic acid; (d) phenol.
Solution. Answer (from key): (b). Nitrobenzene → aniline → benzenediazonium chloride → benzonitrile (CuCN); CH3MgBr adds to C≡N to give an imine salt, and H3O+ hydrolyses it to acetophenone, C6H5COCH3.
Teacher's Note: Grignard adds once to a nitrile; hydrolysis of the imine gives a ketone.
Exam Note: Show nitrile → imine → ketone; no acid forms.
Question 159. Give the product of the reaction sequence: benzene → 1. HNO3/H2SO4; 2. Br2/FeBr3; 3. H2/Pd-C; 4. Cl2/FeBr3; 5. NaNO2/HCl; 6. KI → Product. Options (a)–(d) are tri-substituted benzenes bearing Br, Cl and I in different relative positions.
Solution. Answer (from key): (c). Nitrobenzene is brominated meta (m-bromonitrobenzene); reduction gives m-bromoaniline; the strongly activating NH2 directs chlorination to the position ortho to NH2 and para to Br (5-bromo-2-chloroaniline); diazotisation and KI replace NH2 by I. Product (c): 4-bromo-1-chloro-2-iodobenzene (I and Cl adjacent, Br para to Cl).
Teacher's Note: NH2 controls the chlorination; the diazonium group is then swapped for iodine.
Exam Note: Track the NH2 position through to the final iodide.
Question 160. Which represents an intermediate formed in the reaction of toluene and chlorine at elevated temperature in sunlight?
(a) a cyclohexadienyl cation with H and Cl on the sp3 carbon (para to CH3); (b) the corresponding cyclohexadienyl radical; (c) C6H5CH2• (benzyl radical); (d) C6H5CH2+ (benzyl cation).
Solution. Answer (from key): (c). Sunlight and heat promote free-radical chlorination of the side chain: Cl• abstracts a benzylic hydrogen to give the resonance-stabilised benzyl radical, which then abstracts Cl from Cl2 to give C6H5CH2Cl.
Teacher's Note: Light and heat give radicals; the benzylic radical is resonance-stabilised.
Exam Note: Light = side chain; Lewis acid, dark = ring substitution.
Question 161. The decreasing order of reactivity of m-nitrobromobenzene (I), 2,4,6-trinitrobromobenzene (II), p-nitrobromobenzene (III) and 2,4-dinitrobromobenzene (IV) towards OH– ions is:
(a) I > II > III > IV; (b) II > IV > III > I; (c) IV > II > III > I; (d) II > IV > I > III
Solution. Answer (from key): (b). This is SNAr (addition–elimination). Reactivity increases with the number of ortho/para NO2 groups that stabilise the Meisenheimer anion: II (three) > IV (two) > III (one) > I (meta NO2 cannot delocalise the charge).
Teacher's Note: Count ortho/para nitro groups; meta nitro gives no resonance stabilisation of the carbanion.
Exam Note: Meisenheimer complex stability decides the order.
Question 162. Which one of the following compounds is most reactive for ArSN2 (SNAr) reaction?
(a) 4-chloronitrobenzene; (b) 3-chloronitrobenzene; (c) 1-chloro-2,4-dinitrobenzene; (d) 2-chloronitrobenzene.
Solution. Answer (from key): (c). Two NO2 groups, ortho and para to Cl, give the best stabilisation of the intermediate anion, so 2,4-dinitrochlorobenzene reacts fastest.
Teacher's Note: Two ortho/para nitro groups stabilise the anionic intermediate best.
Exam Note: Choose the substrate with most o/p electron-withdrawing groups.
Question 163. Which one amongst the following carbocations is most stable?
(a) (C6H5)2CH+; (b) a six-membered ring dienyl cation as drawn (ring with two double bonds and a positive carbon); (c) (CH3)3C+; (d) tricyclopropylmethyl cation.
Solution. Answer (from key): (d). Cyclopropyl groups stabilise an adjacent positive carbon strongly through conjugation of their bent (‘banana’) C–C bonds with the empty p orbital; three of them make the tricyclopropylmethyl cation more stable than the diphenylmethyl or t-butyl cations.
Teacher's Note: Cyclopropyl is a better cation stabiliser than phenyl through bent-bond conjugation.
Exam Note: Know the order: cyclopropyl > phenyl in stabilising a cation.
Question 164. Cyclopentadiene is much more acidic than cyclopentane. The reason is that:
(a) cyclopentadiene has conjugated double bonds; (b) cyclopentadiene has both sp2 and sp3 hybridised carbon atoms; (c) cyclopentadiene is a strain-free cyclic system; (d) cyclopentadienide ion, the conjugate base of cyclopentadiene, is an aromatic species and hence has higher stability.
Solution. Answer (from key): (d). Loss of H+ from the CH2 carbon gives the cyclopentadienyl anion, planar, cyclic, fully conjugated with 6 π electrons (4n + 2, n = 1), hence aromatic and unusually stable (pKa about 16).
Teacher's Note: Anion has 6 π electrons in a planar ring, so it is aromatic.
Exam Note: Quote 4n + 2 rule with n = 1.
Question 165. Friedel–Crafts acylation can be used to obtain which of the compounds: (I) 4-methoxyacetophenone, (II) 4-methylacetophenone, (III) 4-nitroacetophenone, (IV) 4-(dimethylamino)acetophenone?
(a) II, III and IV; (b) I, III and IV; (c) I and II; (d) II and III
Solution. Answer (from key): (c). Anisole and toluene are activated and acylate para. Nitrobenzene is too deactivated for Friedel–Crafts, and N,N-dimethylaniline complexes with AlCl3 through nitrogen, which deactivates the ring. So only I and II can be made.
Teacher's Note: Strongly deactivated rings and amines (which bind AlCl3) fail Friedel–Crafts.
Exam Note: Two reasons for failure: deactivation and amine–AlCl3 complex.
Question 166. The major product of the reaction of p-terphenyl (three benzene rings joined in a line) with Br2/FeBr3 is:
(a) Br at the para position of a terminal ring (far end); (b) Br ortho on a terminal ring; (c) Br on the central ring (ortho to a link); (d) Br meta on a terminal ring.
Solution. Book key: (c). Corrected: (a). Phenyl is an o/p director. In the σ-complex for attack at the para position of a terminal ring, the positive charge is delocalised through the central ring into the second terminal ring (three rings). Attack on the central ring (position ortho to one phenyl) delocalises charge into only one adjacent ring and is also more hindered. Hence 4-bromo-p-terphenyl (a) is the major product.
Teacher's Note: Choose the site whose cation is delocalised over the most rings; para is also unhindered.
Exam Note: Draw resonance forms; para on terminal ring gives longest conjugation.
Question 167. The decreasing order of reactivity of the given compounds towards nucleophilic substitution with aqueous NaOH is: (I) m-nitrobromobenzene, (II) 2,4,6-trinitrobromobenzene, (III) p-nitrobromobenzene, (IV) 2,4-dinitrobromobenzene.
(a) I > II > III > IV; (b) II > IV > III > I; (c) IV > II > III > I; (d) II > IV > I > III
Solution. Answer (from key): (b). In SNAr the rate depends on stabilisation of the negative charge by ortho/para NO2 groups: three (II) > two (IV) > one (III) > meta only (I).
Teacher's Note: More ortho/para nitro groups give a more stable Meisenheimer anion.
Exam Note: Count o/p NO2 groups; meta counts for little.
Question 168. Identify the end product (B): phenol → (conc. H2SO4, 100 °C) A → (Br2/H2O, excess) B.
(a) 2,6-dibromo-4-sulfophenol; (b) tribromophenol with Br at positions 2, 3 and 6; (c) 2-bromo-?-sulfophenol (SO3H ortho, Br para); (d) 2,4,6-tribromophenol.
Solution. Answer (from key): (d). At 100 °C sulfonation gives the thermodynamic product, p-hydroxybenzenesulfonic acid (A). With excess bromine water the highly activated ring is brominated at both ortho positions and the SO3H group at the para position is replaced by Br (ipso substitution, loss of SO3/H2SO4). B = 2,4,6-tribromophenol.
Teacher's Note: High-temperature sulfonation is para; excess Br2 water displaces SO3H by ipso attack.
Exam Note: Mention ipso substitution of the sulfonic acid group.
Question 169. Consider the sequence: 2-benzylbenzoic acid → SOCl2 → A → (1. AlCl3; 2. H3O+) → B → (Zn–Hg, conc. HCl, heat) → C. The end product (C) is:
(a) a five-membered lactone with phenyl (3-phenylphthalide); (b) a 1-phenyl-1,3-dihydroisobenzofuran; (c) anthrone (anthracen-9(10H)-one); (d) 9,10-dihydroanthracene.
Solution. Answer (from key): (d). SOCl2 gives the acid chloride A. AlCl3 causes intramolecular Friedel–Crafts acylation onto the other ring, closing a six-membered ring: anthrone (B, C=O at C-9, CH2 at C-10). Clemmensen reduction converts C=O to CH2, giving 9,10-dihydroanthracene (C).
Teacher's Note: Intramolecular acylation closes a six-membered ketone ring; Clemmensen removes the C=O.
Exam Note: Name B as anthrone; reduction gives CH2–CH2 bridge.
Question 170. For the diazonium ions, the order of reactivity towards diazo-coupling with phenol in the presence of dilute NaOH is: (I) Me2N–C6H4–N2+, (II) O2N–C6H4–N2+, (III) CH3O–C6H4–N2+, (IV) CH3–C6H4–N2+ (all para).
(a) I < IV < II < III; (b) I < III < IV < II; (c) III < I < II < IV; (d) III < I < IV < II
Solution. Answer (from key): (b). The diazonium ion is the electrophile; electron-withdrawing groups increase its electrophilicity and electron-donating groups reduce it. Donor strength: NMe2 > OCH3 > CH3; NO2 withdraws. Reactivity: I < III < IV < II.
Teacher's Note: Diazonium is the electrophile; EWG raises reactivity, strong donors lower it.
Exam Note: Rank donors by +M strength; nitro is most reactive.
Question 171. Major product obtained when benzene reacts with cyclohexene (2 mol) in H2SO4 is:
(a) an ortho-substituted cyclohexyl-biphenyl type structure (as drawn); (b) 1,4-dicyclohexylbenzene (cyclohexane–benzene–cyclohexane); (c) Ph–C6H10–C6H11 (as drawn); (d) Ph–C6H4–C6H11 (para, as drawn).
Solution. Answer (from key): (b). H+ adds to cyclohexene to give the cyclohexyl cation, which alkylates benzene to cyclohexylbenzene. With 2 mol of alkene a second cyclohexyl group enters the activated ring at the para position (the bulky group avoids ortho), giving 1,4-dicyclohexylbenzene.
Teacher's Note: Alkene plus acid gives a carbocation that alkylates; second group goes para.
Exam Note: Two moles alkene means disubstitution; para for steric reasons.
Question 172. Dewar benzene (A) → (H+ or AlCl3) (B); A and B are isomers. Product (B) (major) is:
(a) benzene; (b) bicyclopropylidene (two three-membered rings joined by C=C, as drawn); (c) a six-membered ring with two exocyclic C=C (as drawn); (d) a prism-type cage (as drawn).
Solution. Answer (from key): (a). Dewar benzene is a strained, high-energy isomer of C6H6. Acid or Lewis acid opens the strained central bond and it isomerises to the far more stable aromatic isomer, benzene.
Teacher's Note: Strain release drives isomerisation to the aromatic isomer.
Exam Note: Aromatic stabilisation makes benzene the sink among C6H6 isomers.
Question 173. The step shown is a recent synthesis of corannulene: a partially hydrogenated C20 precursor → (Pd/C) (A) C20H10 (corannulene). Product (A) is:
(a) corannulene: a central five-membered ring fused to five six-membered rings, drawn fully aromatic; (b), (c), (d) structures with fewer rings or a different ring-fusion pattern.
Solution. Answer (from key): (a). Pd/C dehydrogenates the hydrogenated rings, giving the fully conjugated bowl-shaped hydrocarbon corannulene, C20H10, a central cyclopentane-type ring surrounded by five fused benzene rings.
Teacher's Note: Pd/C removes hydrogen to aromatise the rings, giving corannulene.
Exam Note: Check formula C20H10 against the structure.
Question 174. Identify the position where electrophilic aromatic substitution (E.A.S.) will take place in the benzene ring of a ring bearing a tert-butyl group (upper left), fused to a five-membered ring on the right (gem-dimethyl on its upper carbon), with positions marked a (top, between t-Bu and the ring fusion), b (bottom), c (lower left, next to t-Bu) and d (on the five-membered ring).
(a) a; (b) b; (c) c; (d) all positions are identical.
Solution. Answer (from key): (b). Position a is flanked by the t-butyl group and the fused ring (very hindered); c is ortho to t-butyl (hindered); d is not on the aromatic ring. Position b is ortho to the ring-fusion alkyl carbon and para to the other ring-fusion alkyl carbon, activated by alkyl groups and sterically free.
Teacher's Note: Pick the open position activated by alkyl groups and not flanked by t-butyl.
Exam Note: Steric hindrance by t-butyl blocks adjacent positions.
Question 175. Phenylacetic acid with 14C at the carboxyl carbon, C6H5CH2–14CO2H, is treated with (1) KMnO4, HO–, Δ; (2) H3O+. The labelled carbon goes with:
(a) C6H5–14CO2H; (b) 14CO2; (c) C6H5CH2–14CO2H; (d) 14CH4.
Solution. Answer (from key): (b). Hot alkaline KMnO4 oxidises the benzylic CH2. The side chain is degraded to benzoic acid and the original carboxyl carbon is lost as CO2, so the label leaves as 14CO2.
Teacher's Note: The whole side chain is oxidised down to the ring-attached carbon; the other carbon leaves as CO2.
Exam Note: Trace the labelled carbon through side-chain oxidation.
Question 176. What is the expected order of reactivity of the following in electrophilic chlorination (Cl2 + FeCl3)? (I) C6H5CH2CO2H, (II) C6H5N(CH3)2, (III) C6H5OCOCH3, (IV) C6H5CCl3 (more reactive > less reactive).
(a) I > II > III > IV; (b) IV > III > II > I; (c) III > I > IV > II; (d) II > III > I > IV
Solution. Answer (from key): (d). NMe2 is a very strong activator (II). OCOCH3 activates through oxygen lone pair, less than NMe2 because the lone pair is also drawn into the C=O (III). CH2CO2H is nearly neutral (I). CCl3 is strongly electron-withdrawing and deactivating (IV). Order: II > III > I > IV.
Teacher's Note: Rank by lone-pair donation: NMe2 > OCOR > CH2R > CCl3.
Exam Note: Compare +M donors first, then inductive groups.
Question 177. Which of the following is the major product from sulfonation of α-tetralone (H2SO4, heat)?
(a) sulfonic acid at C-8 (next to C=O); (b) sulfonic acid at C-7; (c) sulfonic acid at C-6; (d) sulfonic acid at C-5.
Solution. Answer (from key): (b). The acyl C=O is meta-directing (towards C-5 and C-7) and the ring-fusion alkyl carbon C-4a is para-directing (towards C-7). C-7 is meta to the carbonyl-bearing carbon and para to the alkyl-bearing carbon, and it is unhindered, so 7-sulfonic acid forms.
Teacher's Note: C=O directs meta, alkyl directs para; both point to C-7.
Exam Note: Combine directing effects of the acyl and alkyl groups.
Question 178. Which of the following procedures would be best for the preparation of phenyl benzyl ether, C6H5OCH2C6H5?
(a) C6H5Cl + C6H5CH2O–Na+; (b) C6H5O–Na+ + C6H5CH2Cl; (c) 2C6H5Cl + Na2O; (d) 2C6H5MgBr + CH2O
Solution. Answer (from key): (b). This is a Williamson ether synthesis: sodium phenoxide attacks the reactive benzylic chloride by SN2. Aryl chlorides (a, c) are inert to SN2; (d) gives an alcohol, not an ether.
Teacher's Note: Williamson needs an SN2-active alkyl halide; aryl halides do not react.
Exam Note: Choose the benzylic halide partner; justify why aryl Cl fails.
Question 179. Which procedure would be best for the reaction 4-bromotoluene → 4-BrC6H4–CH2–C≡C–CH3?
(a) (i) KOH, heat (ii) CH3C≡C–Br; (b) (i) KMnO4, heat (ii) CH3C≡C–Na+ (iii) excess H2O; (c) (i) NBS in CCl4, heat (ii) CH3C≡C–Na+; (d) (i) Mg in ether (ii) CH3C≡CBr (iii) excess H3PO4
Solution. Answer (from key): (c). NBS/CCl4/heat brominates the benzylic CH3 to give 4-BrC6H4CH2Br (the aryl Br is untouched); the propynide ion then displaces the benzylic bromide by SN2, forming the C–C bond.
Teacher's Note: NBS brominates the benzylic position; the acetylide then does SN2.
Exam Note: Radical benzylic bromination first, then acetylide substitution.
Question 180. Which procedure would be best for converting 4-chlorotoluene into 4-chloro-?-bromo-?-nitrobenzoic acid (a benzoic acid bearing Cl, Br and NO2, as drawn)?
(a) (i) Br2 + FeBr3 (ii) KMnO4, heat (iii) HNO3 and H2SO4; (b) (i) KMnO4, heat (ii) Br2 + FeBr3 (iii) HNO3 and H2SO4; (c) (i) NBS in CCl4, heat (ii) KMnO4, heat (iii) HNO3 and H2SO4; (d) (i) NBS in CCl4, heat (ii) NaNO2 and heat
Solution. Answer (from key): (a). Ring bromination must be done while CH3 (an activating o/p director) is still present; KMnO4 then converts CH3 to COOH; the final nitration is directed meta to COOH. NBS (c, d) brominates the side chain, not the ring, and (b) brominates a ring already deactivated by COOH with conflicting directing effects.
Teacher's Note: Introduce ring Br while CH3 activates; oxidise before the final nitration.
Exam Note: Sequence matters: directing groups change after oxidation.
Question 181. Phenol reacts with acetone in the presence of conc. sulphuric acid to form a C15H16O2 product. Which of the following is this product?
(a) a ketal of acetone with two phenoxy groups; (b) HO–C6H4–C(CH3)2–C6H4–OH (bisphenol-A); (c), (d) cyclohexadienone-type products.
Solution. Answer (from key): (b). Acetone is protonated and attacks the para position of phenol; the resulting alcohol ionises to a tertiary cation that attacks a second phenol para. 2C6H5OH + (CH3)2CO – H2O = C15H16O2, 4,4′-isopropylidenediphenol (bisphenol A).
Teacher's Note: Two phenols condense with acetone, losing water, to give bisphenol A.
Exam Note: Verify the formula C15H16O2 by atom count.
Question 182. Heating benzene in a large excess of 80% D2SO4 in D2O results in what product?
(a) C6H5SO3D; (b) C6H5OD; (c) C6H5D; (d) C6D6
Solution. Answer (from key): (d). D+ is the electrophile; reversible electrophilic substitution (H/D exchange) repeats at every ring position. With a large excess of D2SO4 all six H atoms are replaced, giving C6D6.
Teacher's Note: Reversible ArSE exchange; excess D+ drives full deuteration.
Exam Note: Excess reagent gives complete exchange, not monodeuteration.
Question 183. A solution of cyclohexene in benzene is stirred at 0 °C while concentrated sulphuric acid is added. After washing away the acid and removing the excess benzene, what product is isolated?
(a) cyclohexylbenzene; (b) 1-cyclohexylcyclohexene; (c) trans-1,2-diphenylcyclohexane; (d) 1,1-diphenylcyclohexane
Solution. Answer (from key): (a). H+ protonates cyclohexene to the cyclohexyl cation, which alkylates the benzene present in excess to give cyclohexylbenzene.
Teacher's Note: Alkene plus H+ gives the cation that alkylates benzene (excess benzene limits poly-alkylation).
Exam Note: Excess benzene stops poly-alkylation; name the cation.
Question 184. Identify reagents S and μ in the scheme in which R is converted to the nitrile V via the benzylic halide T: R → (S) → 4-(bromomethyl)benzophenone T → (μ) → 4-(cyanomethyl)benzophenone V. R, S and μ respectively are:
(a) chlorobenzene, 4-(bromomethyl)benzaldehyde (AlCl3), HCN; (b) benzene, 4-(bromomethyl)benzoyl chloride (AlCl3), HCN; (c) benzene, 4-(bromomethyl)benzoyl chloride (AlCl3), KCN; (d) 4-chlorocarbonyl... benzoyl chloride, benzyl bromide (AlCl3), KCN
Solution. Answer (from key): (c). Friedel–Crafts acylation of benzene with 4-(bromomethyl)benzoyl chloride/AlCl3 gives the benzylic bromide T (a diaryl ketone). KCN then displaces the benzylic Br by SN2 to give the nitrile. HCN (a, b) is a poor nucleophile source, and an aldehyde (a) cannot acylate benzene.
Teacher's Note: Acylate benzene first; KCN does SN2 at the benzylic bromide.
Exam Note: KCN, not HCN, for SN2 cyanation of benzylic halides.
Question 185. Two aromatic compounds P and Q give product R = 4-methylbenzophenone. Reactants P, Q and reagent are:
(a) benzoyl chloride, toluene, AlCl3; (b) benzaldehyde, 4-chlorotoluene, AlCl3; (c) benzene, 4-methylbenzoyl chloride, AlCl3; (d) benzene, 4-methylbenzoyl chloride, ZnCl2
Solution. Answer (from key): (c). Friedel–Crafts acylation of benzene with p-toluoyl chloride/AlCl3 gives 4-methylbenzophenone. (Note: benzoyl chloride + toluene/AlCl3, option (a), would also give the same para product; the book key lists only (c). ZnCl2 in (d) is too weak a catalyst, and (b) is not an acylation.)
Teacher's Note: Acyl chloride plus AlCl3 acylates the arene; check the ketone carbons.
Exam Note: Name acylium ion as the electrophile.
Question 186. Which of the following C6H6 compounds has a single set of structurally equivalent hydrogen atoms? I = benzene; II = a tricyclic C6H6 (two fused four-membered rings as drawn); hexa-1,5-diyne (H–C≡C–CH2CH2–C≡C–H); III = benzvalene-type bicyclic; IV = [3]radialene (three-membered ring with three exocyclic CH2); V = fulvene.
(a) I and II; (b) I and IV; (c) I and V; (d) I, II and III
Solution. Answer (from key): (b). Benzene has six identical H atoms (D6h). [3]Radialene (IV) has three equivalent =CH2 groups, so all six H are equivalent. Fulvene (V), hexadiyne and the bicyclic isomers each have at least two kinds of H.
Teacher's Note: Symmetry equivalence: benzene and [3]radialene have one H environment.
Exam Note: Count distinct H environments for each isomer.
Question 187. Which of the following compounds would not be considered aromatic in its behaviour?
(a) pyridine; (b) barrelene (bicyclo[2.2.2]octa-2,5,7-triene); (c) pyrrole; (d) naphthalene
Solution. Answer (from key): (b). Barrelene is a non-planar bicyclic triene whose three C=C bonds cannot form a cyclic conjugated π system. Pyridine, pyrrole and naphthalene are planar, cyclic and obey Hückel's rule.
Teacher's Note: Aromaticity needs a planar, cyclic, fully conjugated ring with 4n + 2 π electrons.
Exam Note: Barrelene: non-planar, no cyclic conjugation, so non-aromatic.
Question 188. A C8H10 hydrocarbon is nitrated by HNO3 and sulphuric acid. Two, and only two, C8H9NO2 isomers are obtained. Which fits this evidence?
(a) ethylbenzene; (b) ortho-xylene; (c) meta-xylene; (d) para-xylene
Solution. Answer (from key): (b). o-Xylene has two types of free ring position (3- and 4-), giving 3-nitro- and 4-nitro-o-xylene. Ethylbenzene gives o-, m- and p-products, m-xylene gives 2-, 4- and 5-nitro isomers, and p-xylene has only one type of position (one product).
Teacher's Note: Count the distinct ring positions of each isomer: o-xylene has two.
Exam Note: Use symmetry to count non-equivalent ring positions.
Question 189. Which of the following benzene ring substituents is deactivating but ortho-para directing?
(a) –N=O; (b) –OCH3; (c) –COCH3; (d) –NO2
Solution. Answer (from key): (a). The nitroso group withdraws electrons inductively (deactivating) but its nitrogen lone pair can stabilise the ortho/para σ-complexes, so it directs o/p, like the halogens. OCH3 activates; COCH3 and NO2 deactivate and direct meta.
Teacher's Note: –N=O behaves like a halogen: deactivating by induction, o/p by lone pair.
Exam Note: Other classes: –OCH3 activating; –COCH3, –NO2 meta.
Question 190. Which of the following compounds forms ortho-benzenedicarboxylic acid when oxidised by hot aqueous potassium permanganate?
(a) a benzene ring with a tert-butyl group and an adjacent alkyl group (as drawn); (b) 1,2,3,4-tetrahydronaphthalene (tetralin); (c) and (d) alkylbenzenes with side chains that are not ortho to each other or do not both carry benzylic H (as drawn).
Solution. Answer (from key): (b). Hot KMnO4 oxidises every benzylic carbon that carries at least one H. In tetralin the two benzylic CH2 groups are on adjacent ring carbons, so the saturated ring is cleaved to two COOH groups ortho to each other: phthalic acid. A t-butyl group has no benzylic H and is not oxidised.
Teacher's Note: Each benzylic C–H side chain becomes COOH; ortho-fused chains give phthalic acid.
Exam Note: Benzylic H is required; t-butyl is not oxidised.
Question 191. Which of the following organic chlorides will not give a Friedel–Crafts alkylation product when heated with benzene and AlCl3?
(a) (CH3)3CCl; (b) CH2=CHCH2Cl; (c) CH3CH2Cl; (d) CH2=CHCl
Solution. Answer (from key): (d). Vinyl chloride is a vinylic halide: its C–Cl bond is strong (partial double bond character) and the vinyl cation is too unstable to form with AlCl3. The other chlorides give 3°, allyl and 1°/ethyl electrophiles.
Teacher's Note: Vinylic and aryl halides cannot ionise to carbocations.
Exam Note: Vinyl and aryl halides fail in Friedel–Crafts alkylation.
Question 192. Which of the following is aromatic?
(a) cycloheptatrienyl anion; (b) cycloheptatrienylidene (carbene); (c) cyclopentadienyl cation; (d) cyclopentadienylidene (carbene)
Solution. Answer (from key): (b). The cycloheptatrienylidene carbene has a vacant p orbital on the carbene carbon (tropylium-like, 6 π electrons in a seven-membered ring) with the lone pair in an sp2 orbital in the plane, so it is aromatic. The cycloheptatrienyl anion (8 π) and cyclopentadienyl cation (4 π) are anti-aromatic; the cyclopentadienylidene carbene has 4 π electrons.
Teacher's Note: Hückel count: 6 π electrons in a planar ring comes from the empty p orbital.
Exam Note: Count π electrons per ring, remembering the carbene lone pair is in-plane.
Question 193. Which substance will increase the acidity of phenol?
(a) dil. H2SO4; (b) dil. HCl; (c) conc. H2SO4; (d) conc. CH3COOH
Solution. Answer (from key): (c). Conc. H2SO4 sulfonates phenol, introducing an electron-withdrawing SO3H group that stabilises the phenoxide ion, so the resulting hydroxybenzenesulfonic acid is more acidic than phenol. Dilute acids and acetic acid do not change the phenol.
Teacher's Note: Sulfonation adds an electron-withdrawing group, stabilising the phenoxide.
Exam Note: Substituent effect: –SO3H raises acidity of phenol.
Question 194. Pyrrole + PhMgBr → E + F; E + MeCl → G + H; F + MeCl → no reaction without a catalyst. Structures: 1 = N-phenylpyrrolium-type cation; 2 = benzene; 3 = pyrrolyl magnesium bromide; 4 = 2-phenylpyrrole; 5 = 3-phenylpyrrole; 6 = 2-methylpyrrole; 7 = 3-methylpyrrole. The structures of products E–H, respectively, are:
(a) 3, 2, 6, 7; (b) 4, 5, 6, 1; (c) 3, 4, 5, 2; (d) 3, 2, 4, 5
Solution. Answer (from key): (a). The acidic N–H of pyrrole reacts with PhMgBr to give the pyrrolyl Grignard E (3) and benzene F (2, which does not react with MeCl without AlCl3). E reacts with MeCl at carbon to give 2-methylpyrrole (G, 6) and 3-methylpyrrole (H, 7).
Teacher's Note: Grignard acts as a base towards N–H; pyrrolyl-MgBr then alkylates at carbon.
Exam Note: N–H is acidic; benzene is only a by-product.
Question 195. Cyclohexenyl phenyl ketone (cyclohex-1-enyl phenyl ketone) → (H+) (A); product A is:
(a) an isomeric cyclohexene ketone; (b) the enol form; (c) a tricyclic ketone with cyclopentanone ring fused to the benzene ring and the cyclohexane ring (hexahydrofluorenone); (d) none of these
Solution. Answer (from key): (c). Protonation of the carbonyl gives a pentadienyl-type cation, which undergoes 4π electrocyclisation (Nazarov-type cyclisation) involving the aromatic ring and the C=C. A new five-membered ring forms between the benzene ring and the cyclohexane ring, giving a fused cyclopentanone.
Teacher's Note: Aryl vinyl ketone plus acid gives Nazarov cyclisation to a fused cyclopentanone.
Exam Note: Recognise Nazarov: conjugated ketone, acid, five-membered ring closure.
Question 196. A divinyl ketone, R–CH=CH–CO–CH=CH–R, ⇌ (H+). Identify the product of the above rearrangement reaction.
(a) cyclopentenone with R groups at the 3,4-positions; (b) cyclopentenone with the C=C in the ring and R at C-4 and C-5; (c) cyclopentadienone; (d) a cyclopentanol.
Solution. Answer (from key): (b). Acid protonates the C=O to give a pentadienyl cation; conrotatory 4π electrocyclisation forms the C–C bond between the two β carbons, and loss of H+ gives the cyclopentenone (Nazarov cyclisation).
Teacher's Note: Nazarov: divinyl ketone plus acid closes to a cyclopentenone.
Exam Note: Name the Nazarov cyclisation and the 4π conrotatory step.
Question 197. The product obtained in the transformation of 1-cyclohexenyl styryl ketone (cyclohexenyl–CO–CH=CH–Ph) with polyphosphoric acid (PPA) is:
(a) a cyclopentadiene-fused system without C=O; (b) a cyclopentenone fused to cyclohexane bearing a phenyl group; (c) a seven-membered ring benzo-fused ketone; (d) a saturated aryl ketone.
Solution. Answer (from key): (b). PPA promotes Nazarov cyclisation of the divinyl ketone: the two β carbons bond, giving a bicyclic cyclopentenone fused to the cyclohexane ring, with the phenyl on the cyclopentenone C=C.
Teacher's Note: PPA catalyses Nazarov cyclisation of divinyl ketones.
Exam Note: Draw the ring closure between the two β carbons.
Question 198. The compound X in the reaction benzene + ICl (anhydrous AlCl3) → X is:
(a) chlorobenzene; (b) iodobenzene; (c) 1-chloro-4-iodobenzene; (d) 1-chloro-3-iodobenzene
Solution. Answer (from key): (b). In I–Cl the more electropositive iodine carries the partial positive charge (Cl is more electronegative), so AlCl3 generates I+ (as Iδ+–Cl···AlCl3) and benzene is iodinated: C6H5I.
Teacher's Note: Iodine is the positive end of ICl, so it is the electrophile.
Exam Note: Polarity of ICl decides the product: iodobenzene.
Question 199. The reaction phenol + 3Br2 → 2,4,6-tribromophenol + 3HBr is:
(a) nucleophilic addition; (b) nucleophilic substitution; (c) electrophilic addition; (d) electrophilic substitution; (e) free radical substitution
Solution. Answer (from key): (d). The electron-rich phenol ring attacks Brδ+ of the polarised Br2; H+ is lost and the ring is restored, which is electrophilic aromatic substitution.
Teacher's Note: Electron-rich ring attacks Br+; H replaced, aromaticity kept.
Exam Note: Name the mechanism: electrophilic aromatic substitution.
Question 200. The reaction toluene + Br2 → benzyl bromide + HBr is:
(a) nucleophilic addition; (b) nucleophilic substitution; (c) electrophilic addition; (d) electrophilic substitution; (e) free radical substitution
Solution. Answer (from key): (e). The conditions (light or heat, no Lewis acid) generate Br•, which abstracts a benzylic H; the benzyl radical reacts with Br2 to give C6H5CH2Br and Br•, a radical chain substitution at the side chain.
Teacher's Note: Side-chain halogenation under light proceeds via a radical chain.
Exam Note: Initiation, propagation, termination for the radical chain.
Question 201. p-Cymene (4-isopropyltoluene) is treated with Cl2/hν giving (P) and with Cl2/AlCl3 giving (Q). Identify the major product of both, respectively.
(a) side-chain CH2Cl (from CH3); ring-Cl ortho to isopropyl; (b) tertiary side-chain chloride; ring-Cl ortho to isopropyl (as drawn); (c) tertiary benzylic chloride (4-CH3–C6H4–C(CH3)2Cl); ring-Cl ortho to CH3; (d) tertiary chloride on the side chain; two chlorines (side chain and ring).
Solution. Answer (from key): (c). Under light, Cl• abstracts the weakest C–H, the tertiary benzylic H of the isopropyl group, giving 4-CH3C6H4C(CH3)2Cl (P). With AlCl3 the reaction is electrophilic ring chlorination ortho to the smaller CH3 group (ortho to the bulky isopropyl is hindered), giving 2-chloro-4-isopropyltoluene (Q).
Teacher's Note: Radicals pick the tertiary benzylic H; ring substitution avoids the bulky isopropyl.
Exam Note: Condition decides site: light = side chain, AlCl3 = ring.
Question 202. Phenol + Ph–N2+Cl– (pH 10–11) → 4-hydroxyazobenzene (HO–C6H4–N=N–Ph). Characteristics of the above reaction are:
(a) C–N coupling reaction; carbocation is intermediate; (b) N–N coupling reaction; carbocation is intermediate; (c) C–N coupling reaction; carbanion is intermediate; (d) N–N coupling reaction; carbanion is intermediate
Solution. Answer (from key): (c). In basic solution phenol is present as phenoxide; the ring carbon para to O– attacks the terminal N of the diazonium ion, forming a new C–N bond (C-coupling, not N-coupling as with amines). The key describes the intermediate as anionic (carbanion-type, phenoxide-stabilised); loss of H+ then gives the azo compound.
Teacher's Note: Phenoxide carbon (para) attacks diazonium nitrogen; C–N bond forms.
Exam Note: Coupling occurs at para carbon; basic pH needed for phenoxide.
Question 203. The compound formed on heating chlorobenzene with chloral in the presence of concentrated sulphuric acid is:
(a) Freon; (b) DDT; (c) Gammexene; (d) Hexachloroethane
Solution. Answer (from key): (b). Two molecules of chlorobenzene condense with chloral (CCl3CHO) in conc. H2SO4, para to Cl, to give 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane, i.e. DDT.
Teacher's Note: Chloral carbonyl is the electrophile; two chlorobenzenes attack para.
Exam Note: Name product DDT with its full formula.
Question 204. Predict the product: benzene → 1. butanoyl chloride, AlCl3; 2. Zn(Hg), HCl; 3. Br2, FeBr3.
(a) 1-(3-bromophenyl)butan-1-one; (b) 1-(4-bromophenyl)butan-1-one with an acetic-anhydride-derived side group; (c) 1-bromo-4-butylbenzene; (d) 1-(2-bromophenyl)butan-1-one
Solution. Answer (from key): (c). Friedel–Crafts acylation gives butyrophenone; Clemmensen reduction converts C=O to CH2 to give butylbenzene (this avoids the rearrangement seen in direct alkylation); bromination then occurs para to the alkyl group (an o/p director): 1-bromo-4-butylbenzene.
Teacher's Note: Acylate–reduce route gives a straight chain; the alkyl group then directs bromine para.
Exam Note: Acylation then Clemmensen avoids carbocation rearrangement.
Question 205. Predict the major product of the reaction sequence: 4-nitrotoluene → Cl2/AlCl3 → A → (1. Fe, HCl; 2. NaOH) → B → Br2/FeBr3 → D → NaOH → E; D → (H2SO4, NaNO2, H2O) → F → (H3PO2, H2O) → G.
(a) 5-bromo-2-chlorotoluene (CH3 at top; Cl ortho to CH3, Br meta to CH3 and para to Cl); (b) Br and Cl interchanged; (c) and (d) the same skeleton bearing an additional acetyl group.
Solution. Answer (from key): (a). Chlorination goes ortho to CH3 (and meta to NO2) to give 2-chloro-4-nitrotoluene (A). Reduction gives 3-chloro-4-methylaniline (B), with NH2 at the old NO2 position. Bromine enters ortho to the strongly activating NH2 at the less hindered site (D). Diazotisation (F) and H3PO2 remove the amino group (G), leaving CH3, Cl and Br in a 1,2,5 pattern: 5-bromo-2-chlorotoluene.
Teacher's Note: NH2 directs Br; diazotisation then H3PO2 removes it, leaving a pattern otherwise hard to make.
Exam Note: Amino group is a removable directing group via H3PO2.
Question 206. Give the major product of the reaction: N-phenylbenzamide (PhCONHPh) + CH3Cl, AlCl3 →
(a) benzoyl ring methylated para (4-methyl-N-phenylbenzamide); (b) benzoyl ring methylated meta; (c) N-(4-methylphenyl)benzamide (methyl para on the N-phenyl ring); (d) N-(3-methylphenyl)benzamide
Solution. Answer (from key): (c). The benzoyl ring is deactivated by C=O (meta director, poor Friedel–Crafts substrate). The N-aryl ring carries –NHCOPh, an activating o/p director (N lone pair), so CH3+ attacks this ring, para to N (less hindered): PhCONH–C6H4–CH3-4.
Teacher's Note: Alkylate the ring bearing the N donor, not the ring bearing C=O.
Exam Note: Compare the two rings: amide N activates, C=O deactivates.
Question 207. 4-Nitrotoluene → (Br2/Fe) (A) → (Sn/HCl) (B) → (NaNO2 + HCl) (C) → (H3PO2) (D) → (KMnO4/HO–) (E). Product (E) is:
(a) 4-bromobenzoic acid; (b) 3-bromobenzoic acid; (c) 2-bromobenzoic acid; (d) terephthalic acid.
Solution. Answer (from key): (c). Bromine enters ortho to CH3 (meta to NO2): 2-bromo-4-nitrotoluene (A). Sn/HCl gives the amine (B), diazotisation (C), and H3PO2 removes the N2+ group to give 2-bromotoluene (D). Oxidation of CH3 gives 2-bromobenzoic acid (E).
Teacher's Note: NO2 is used as a temporary director, then removed via diazonium and H3PO2.
Exam Note: Both groups direct Br to the same ortho position.
Question 208. 1-Fluoro-2,4-dinitrobenzene → (NH2NH2) A → (butan-2-one, H+, Δ) B; products. Incorrect statement regarding the above reaction is:
(a) Product A is 2,4-DNP; (b) A to B is a dehydration reaction; (c) A to B, geometrical isomers will be obtained as a product; (d) B is known as oxime
Solution. Answer (from key): (d). Hydrazine displaces F by SNAr to give 2,4-dinitrophenylhydrazine (A). A condenses with the ketone, losing H2O, to give a 2,4-dinitrophenylhydrazone (B); butan-2-one is unsymmetrical, so E/Z isomers form. B is a hydrazone, not an oxime (an oxime comes from NH2OH), so (d) is the incorrect statement.
Teacher's Note: Hydrazine plus carbonyl gives hydrazone; hydroxylamine plus carbonyl gives oxime.
Exam Note: Do not confuse hydrazone and oxime derivatives.
Question 209. (i) Chlorobenzene is mono-nitrated to M; (ii) nitrobenzene is mono-chlorinated to N; (iii) anisole is mono-nitrated to P; (iv) 2-nitrochlorobenzene is mono-nitrated to Q. Out of M, N, P and Q the compound that undergoes reaction with aq. NaOH fastest is:
(a) M; (b) N; (c) P; (d) Q
Solution. Answer (from key): (d). Q = 1-chloro-2,4-dinitrobenzene, with two NO2 groups ortho and para to Cl, which activates SNAr by OH– most strongly. M (4-chloronitrobenzene mainly) has one o/p nitro; N (3-chloronitrobenzene) has a meta nitro; P (4-nitroanisole) has no leaving group.
Teacher's Note: Two o/p nitro groups ortho/para to Cl give fastest SNAr.
Exam Note: Identify each product first, then rank their SNAr reactivity.
Question 210. For the transformation 3-bromobenzenediazonium chloride → bromobenzene the reagent used is:
(a) LiAlH4; (b) H3PO2; (c) H3O+; (d) H2/Pt
Solution. Book key: (a). Corrected: (b). Replacement of the diazonium group by hydrogen (hydro-de-diazoniation) is done with hypophosphorous acid, H3PO2 (or ethanol). H3O+ would give a phenol, and H2/Pt or LiAlH4 are not used for this step (H2/Pt would also attack the C–Br bond and the ring).
Teacher's Note: H3PO2 reduces ArN2+ to ArH, keeping Br intact.
Exam Note: Remember H3PO2 (or EtOH) for deamination.
Question 211. The reaction phenol + CHCl3 → (NaOH/heat; H+) salicylaldehyde is known as:
(a) Perkin reaction; (b) Sandmeyer reaction; (c) Reimer–Tiemann reaction; (d) Cannizzaro reaction
Solution. Answer (from key): (c). Phenol with CHCl3 and aqueous NaOH introduces CHO ortho to OH through dichlorocarbene (:CCl2) attack on the phenoxide, followed by hydrolysis and acidification: Reimer–Tiemann reaction.
Teacher's Note: Dichlorocarbene is the electrophile attacking phenoxide ortho.
Exam Note: Name the intermediate :CCl2 to score the mechanism marks.
Question 212. A compound X formed after heating coke with lime reacts with water to give Y, which on passing over red-hot iron at 873 K produces Z. The compound Z is:
(a) benzene; (b) hexa-1,3,5-triene (open chain); (c) a butadiene-type diene; (d) cyclohexane
Solution. Answer (from key): (a). Coke + CaO (heat) → CaC2 (X); CaC2 + 2H2O → C2H2 + Ca(OH)2 (Y = ethyne); 3C2H2 over red-hot iron tube at 873 K cyclotrimerises to benzene (Z).
Teacher's Note: CaC2 gives ethyne; three ethyne molecules trimerise to benzene.
Exam Note: Write the three equations in order.
Question 213. The reaction of 50% aq. KOH on an equimolar mixture of 4-methylbenzaldehyde and formaldehyde, followed by acidification, gives:
(a) 4-methylbenzyl alcohol-derived diol; (b) 4-methylbenzyl alcohol + HCOOH; (c) 4-methylbenzoic acid + CH3OH; (d) 4-hydroxy-substituted benzaldehyde
Solution. Answer (from key): (b). Neither aldehyde has α-H, so a crossed Cannizzaro reaction occurs. Formaldehyde, the better hydride donor, is oxidised to formate (HCOOH after acidification) and 4-methylbenzaldehyde is reduced to 4-methylbenzyl alcohol.
Teacher's Note: Crossed Cannizzaro: HCHO is oxidised, the aromatic aldehyde is reduced.
Exam Note: Name the reaction and which aldehyde is oxidised.
Question 214. Which isomer of xylene can give three different monochloro derivatives (on ring substitution)?
(a) o-xylene; (b) m-xylene; (c) p-xylene; (d) xylene cannot give a monochloro derivative
Solution. Answer (from key): (b). m-Xylene has three types of ring H (positions 2, 4(6) and 5), giving three monochloro isomers. o-Xylene gives two (3- and 4-), and p-xylene only one (2-).
Teacher's Note: Count distinct ring hydrogens by symmetry: m-xylene has three.
Exam Note: Use symmetry to count ring positions.
Question 215. The rate of o-nitration of (I) toluene, (II) 2-D-toluene and (III) 2,6-D2-toluene is in the following order:
(a) I > II > III; (b) II > I > III; (c) III > I > II; (d) The rate is the same for all the three compounds
Solution. Answer (from key): (d). Cleavage of the C–H (C–D) bond happens after the rate-determining attack of NO2+, so there is no primary kinetic isotope effect and deuterium substitution does not change the rate.
Teacher's Note: Slow step is attack by the electrophile; C–H cleavage is fast.
Exam Note: No isotope effect (kH/kD ≈ 1) in nitration.
Question 216. Cyclooctatetraene is expected to have:
(a) a planar structure; (b) a tub-shaped structure; (c) open chain isomeric structure; (d) tautomeric bicyclic structure
Solution. Answer (from key): (b). A planar cyclooctatetraene would be anti-aromatic (8 π electrons), so the molecule puckers into a non-planar tub shape with localised alternating C=C bonds and behaves as a non-aromatic polyene.
Teacher's Note: Planarity would make it anti-aromatic, so it puckers into a tub.
Exam Note: Link tub shape to avoiding anti-aromatic 4n π system.
Level 2
Level 2, Question 1. Each of the six compounds has two different benzene rings labelled A and B. In each case, if an electrophilic substitution such as nitration or bromination is carried out, identify which ring (A or B) will be preferentially attacked, and the orientation of the substitution (ortho/para, meta or all sites). Compounds: (1) PhA–CO–CH2–PhB; (2) PhA–N(CH3)–SO2–PhB; (3) PhA–CO–O–PhB; (4) an eight-membered ring: ring A bears N(CH3) and ring B bears C=O, with N(CH3)–C(=O) links on both sides (N,N′-dimethyl dibenzo-diazocine-dione); (5) PhA–CO–CH2–N(CH3)–CO–PhB; (6) a benzo-fused seven-membered ketone: ring A attached to C=O, ring B attached to C(CH3)2 and CH2.
| Compound | Ring attacked | Substitution |
|---|---|---|
| 1 | B | ortho/para |
| 2 | A | ortho/para |
| 3 | B | ortho/para |
| 4 | A | ortho/para |
| 5 | B | meta |
| 6 | B | ortho/para |
Reason: the ring carrying an electron-withdrawing C=O or SO2 group is deactivated (meta director); the ring carrying an alkyl group, an ester oxygen or an amide/sulfonamide nitrogen lone pair is activated (ortho/para). In (5) both rings carry acyl groups; the ring on the amide C=O is less deactivated than the ring on the ketone C=O, so B reacts, at meta.
Teacher's Note: Attack the ring with the donor (alkyl, O, N); acyl and sulfonyl rings are deactivated.
Exam Note: Compare the group on each ring; state o/p or meta.
Level 2, Question 2. When given substituents on a benzene ring, classify each as activating or de-activating and as ortho-para or meta directing for electrophilic aromatic substitution: fill the table with ✓ (right) or ✗ (wrong). Substituents 1–22 are listed in the answer table.
| No. | Substituent | Activating | De-activating | Ortho/para | Meta |
|---|---|---|---|---|---|
| 1 | –OCH3 | ✓ | ✗ | ✓ | ✗ |
| 2 | –COOCH3 (ester, carbonyl attached to ring) | ✗ | ✓ | ✗ | ✓ |
| 3 | –OCOCH3 (ester, oxygen attached to ring) | ✓ | ✗ | ✓ | ✗ |
| 4 | –CH3 | ✓ | ✗ | ✓ | ✗ |
| 5 | –F | ✗ | ✓ | ✓ | ✗ |
| 6 | –Ph | ✓ | ✗ | ✓ | ✗ |
| 7 | –NHCOCH3 | ✓ | ✗ | ✓ | ✗ |
| 8 | –CONHCH3 | ✗ | ✓ | ✗ | ✓ |
| 9 | –Br | ✗ | ✓ | ✓ | ✗ |
| 10 | –CN | ✗ | ✓ | ✗ | ✓ |
| 11 | –CF3 | ✗ | ✓ | ✗ | ✓ |
| 12 | –CONH2 | ✗ | ✓ | ✗ | ✓ |
| 13 | –COOH | ✗ | ✓ | ✗ | ✓ |
| 14 | –CH=CH2 | ✓ | ✗ | ✓ | ✗ |
| 15 | –CH=CH–COOH | ✗ | ✓ | ✓ | ✗ |
| 16 | –CH=CH–CHO | ✗ | ✓ | ✓ | ✗ |
| 17 | –S–Et | ✓ | ✗ | ✓ | ✗ |
| 18 | –S(=O)–Et | ✗ | ✓ | ✓ | ✗ |
| 19 | –SO2–Et | ✗ | ✓ | ✗ | ✓ |
| 20 | –N=O | ✗ | ✓ | ✓ | ✗ |
| 21 | –CH2X | ✗ | ✓ | ✗ | ✓ |
| 22 | –CHX2 | ✗ | ✓ | ✗ | ✓ |
Rule: groups with a lone pair on the atom attached to the ring (O, N, S in thioethers, halogens) are o/p directors; halogens, sulfoxide, nitroso and conjugated acyl-vinyl groups are o/p but deactivating; groups with a δ+ atom on the ring (C=O, CN, CF3, SO2R) are deactivating and meta directing. (As printed in the book key, –CH2X and –CHX2 are listed as meta; in practice benzyl halides give mainly o/p products and benzal halides a mixture.)
Teacher's Note: Lone pair on the attached atom gives o/p; a δ+ atom attached gives meta.
Exam Note: Halogens: deactivating but ortho/para directing.
Level 2, Question 3. Devise a series of reactions to convert benzene into meta-chlorobromobenzene. Select reagents from the table, listing them in the order of use: 1 = conc. H2SO4, heat; 2 = Cl2 + FeCl3, heat; 3 = NaNO2 + H3O+, 0 °C; 4 = H2, Pt catalyst; 5 = Mg in ether; 6 = PBr3; 7 = H3PO2; 8 = HNO3 (conc.) + H2SO4 (conc.), heat; 9 = Cu2Br2 + HBr; 10 = (CH3CO)2O + pyridine.
(a) 1 then 2 then 6; (b) 2 then 8 then 4 then 3 then 9; (c) 8 then 4 then 10 then 2 then 3 then 9; (d) 8 then 2 then 4 then 3 then 9
Solution. Answer (from key): (d). Nitration (8) gives nitrobenzene; chlorination (2) goes meta to NO2 giving m-chloronitrobenzene; H2/Pt (4) reduces NO2 to NH2; diazotisation (3) and the Sandmeyer reaction with Cu2Br2/HBr (9) replace N2+ by Br, giving m-bromochlorobenzene. In (b) Cl enters first and directs the nitro group o/p; (c) acetylation is unnecessary and its chlorination would go ortho/para.
Teacher's Note: Use nitro as a meta director, then convert it to Br via a Sandmeyer reaction.
Exam Note: Order matters: NO2 first so Cl goes meta.
Level 2, Question 4. Match Column (I) and Column (II) (matrix). Column (I): (a) 2,4,6-trichloro-1,3,5-triazine (cyanuric chloride); (b) borazine, B3N3H6; (c) ferrocene, Fe(C5H5)2; (d) dibenzenechromium, Cr(C6H6)2. Column (II): (p) aromatic; (q) (4n + 2)π electrons in a single ring; (r) 4nπ electrons in a single ring; (s) effective atomic number of metal = 36.
Cyanuric chloride and borazine are planar six-membered rings with 6 π electrons. In ferrocene each C5H5– ring has 6 π electrons; EAN of Fe = 26 – 2 + 12 = 36. In Cr(C6H6)2 each benzene has 6 π electrons; EAN of Cr = 24 – 0 + 12 = 36.
Teacher's Note: Count 6 π electrons per ring; EAN = Z – oxidation state + 2 × ligand electron pairs.
Exam Note: Show the EAN calculation for 36.
Level 2, Question 5. Match Column (I) and Column (II). Column (I), monocyclic compounds: (a) C4H42–; (b) C4H42+; (c) C9H9+; (d) C9H9–. Column (II), number of π electrons: (p) 2π; (q) 6π; (r) 8π; (s) 10π.
(a) cyclobutadiene has 4 π electrons; the dianion adds 2, giving 6. (b) the dication loses 2, giving 2. (c) cyclononatetraenyl cation: 4 C=C = 8 π electrons, the empty p orbital adds none. (d) the anion adds 2 electrons to 8, giving 10.
Teacher's Note: Neutral parent π count, then add or remove the charge electrons.
Exam Note: Count π electrons: neutral ring + electrons from charge.
Level 2, Question 6. Match Column (I), Column (II) and Column (III) (matrix). Column I: (a) cyclobutadiene dication C4H42+; (b) cyclobutadiene dianion C4H42–; (c) cyclooctatetraene; (d) a bicyclic ten-membered cyclic polyene (as drawn). Column II: (p) aromatic; (q) non-aromatic; (r) anti-aromatic; (s) planar compound. Column III: (w) (4n + 2)π electrons, n = 0, 1, 2, 3; (x) 4nπ electrons, n = 1, 2, 3; (y) non-planar compound; (z) readily reacts with active metal.
(a) 2 π electrons and (b) 6 π electrons are planar, cyclic, (4n + 2): aromatic. (c) cyclooctatetraene has 8 π (4n) but is tub-shaped, so non-aromatic and non-planar; it accepts electrons from active metals to form the aromatic dianion. (d) the ten-membered polyene has 10 π (4n + 2) but is non-planar because of H–H clash, hence non-aromatic.
Teacher's Note: Planarity plus 4n + 2 gives aromatic; non-planar rings escape anti-aromaticity.
Exam Note: COT reacts with K to give an aromatic 10π dianion.
Level 2, Question 7. Match Column (I), Column (II) and Column (III) (matrix). Column I: (a) cyclobutadiene; (b) cyclooctatetraene; (c) C4H42–; (d) C4H42+. Column II: (p) readily reacts with active metal; (q) readily undergoes dimerisation at room temperature; (r) (4n + 2)π electrons, n = 0, 1, 2, 3; (s) 4nπ electrons. Column III: (w) aromatic; (x) anti-aromatic; (y) non-aromatic; (z) high dipole.
Cyclobutadiene (4 π) is anti-aromatic, so it dimerises and accepts electrons from active metals. Cyclooctatetraene (8 π, non-planar) is non-aromatic. The dianion (6 π) and dication (2 π) obey 4n + 2, are aromatic and, being charged, have large dipole character.
Teacher's Note: Charged cyclobutadiene species are aromatic; the neutral compound is anti-aromatic.
Exam Note: Count π electrons and decide aromatic, anti or non.
Level 2, Question 8. Among the following compounds: (a) naphthalene; (b) cyclobutadiene; (c) 1,3,5-triazine; (d) azacyclobutadiene (azete); (e) cyclobutadiene dication; (f) cyclooctatetraene; (g) C8H82–; (h) C3H3+; (i) hydroxycyclopropenyl cation (protonated cyclopropenone); (j) a dihydro-diazine ring with an sp3 carbon (as drawn); (k) pyridine; (l) a substituted azacyclobutadiene (as drawn). (a) number aromatic = P; (b) number anti-aromatic = Q; (c) number non-aromatic = R; (d) number that readily undergo dimerisation at room temperature = S; (e) number that react with active metal = T. Sum P + Q + R + S + T = ?
Aromatic: a, c, e, g, h, i, k = 7. Anti-aromatic: b, d, l = 3. Non-aromatic: f, j = 2. Readily dimerise: the three anti-aromatic ones, 3. React with active metal: the anti-aromatic ones and cyclooctatetraene = 4. Sum 7 + 3 + 2 + 3 + 4 = 19.
Teacher's Note: Classify each ring by planarity and π count, then add the five counts.
Exam Note: State each count P, Q, R, S, T before the sum.
Level 2, Question 9. Of the following compounds, which will react with Br2 at room temperature in the dark? (a) benzene; (b) cyclohexene; (c) cyclohexane; (d) propanoic acid; (e) phenol; (f) nitrobenzene; (g) hexyne; (h) 2,2-dichloropropane.
Cyclohexene and hexyne add Br2 across the multiple bond (electrophilic addition); phenol is so activated that it is brominated without a catalyst. Benzene and nitrobenzene need FeBr3; cyclohexane, propanoic acid and 2,2-dichloropropane need light or heat (radical) or do not react.
Teacher's Note: Alkenes, alkynes and phenol react with Br2 without a catalyst or light.
Exam Note: Benzene needs FeBr3; alkanes need light.
Level 2, Question 10. Among the following compounds: (a) naphthalene; (b) C8H82–; (c) cyclobutadiene; (d) cyclooctatetraene; (e) imidazole; (f) benzene; (g) cyclohexa-1,3-diene; (h) 1,3,5-triazine (lone pairs shown on N); (i) C3H3+; (j) hydroxycyclopropenyl cation; (k) azacyclobutadiene; (l) a bridged ten-membered ring (as drawn). (a) number aromatic = w; (b) number non-aromatic = x; (c) number anti-aromatic = y; (d) number that readily dimerise at room temperature = z. Sum w + x + y + z = ?
Aromatic w = 7 (a, b, e, f, h, i, j); non-aromatic x = 3 (d, g, l); anti-aromatic y = 2 (c, k); readily dimerising z = 2 (c, k). Sum 7 + 3 + 2 + 2 = 14.
Teacher's Note: Classify every ring first; the sum is just the four counts.
Exam Note: Show each category list before adding.
Level 2, Question 11. Complete the following table. (a) Toluene → reagent (A) → benzyl chloride. (b) 4-Nitroaniline → 1. NaNO2 in dilute H2SO4/0–5 °C; 2. heat or boiling → (B). (c) Toluene → SO3/conc. H2SO4 → (C). (d) Reactant (D) → 1. NaOH heated at 330 °C; 2. dilute H3O+ → m-cresol and p-cresol. (e) 1-Chloro-2,4-dinitrobenzene → 1. aqueous NaOH heated at 60 °C; 2. dilute H3O+ → (E).
Solution. Answer (from key): (A) = Cl2/hν or SO2Cl2/hν; (B) = 4-nitrophenol (HO–C6H4–NO2-4); (C) = 4-methylbenzenesulfonic acid (p-toluenesulfonic acid); (D) = 4-chlorotoluene (p-chlorotoluene, which reacts through a benzyne intermediate to give a mixture of m- and p-cresol); (E) = 2,4-dinitrophenol.
Teacher's Note: Radical chlorination for side chain; diazonium hydrolysis gives phenol; aryl halide plus NaOH at 330 °C goes via benzyne.
Exam Note: Benzyne gives both meta and para cresol from p-chlorotoluene.
Level 2, Question 12 A. Comprehension. The energy profile diagram for nitration of benzene with mixed acid (HNO3 + H2SO4) shows reactants C6H6 + NO2+, a first transition state T.S.1 (higher), an intermediate (x), a second transition state T.S.2 (lower), and the product Ph–NO2. A. Identify (x). Options: (a) the σ-complex (arenium ion): sp3 carbon bearing H and NO2, positive charge delocalised over the ring; (b) a structure with NO2 partially bonded (δ+) with a dotted ring; (c) a structure with H partially bonded (δ+); (d) none.
Solution. Answer (from key): (a). The intermediate (x) is the fully formed arenium ion (Wheland σ-complex), a real intermediate lying in the energy valley between the two transition states.
Teacher's Note: The intermediate sits in the energy minimum: the full σ-complex.
Exam Note: Intermediate is a minimum; transition states are maxima.
Level 2, Question 12 B. Identify T.S.1 in the above reaction (options as for A: (a) full σ-complex; (b) structure with NO2 partially bonded to ring carbon, dotted delocalised ring with δ+; (c) structure with the C–H bond partially broken (δ+ on H); (d) none).
Solution. Answer (from key): (b). T.S.1 is the transition state for formation of the σ-complex, in which the C–NO2 bond is only partially formed (this is the rate-determining step).
Teacher's Note: T.S.1: C–N bond partly formed, rate-determining step.
Exam Note: T.S.1 is the higher barrier; electrophile addition is slow.
Level 2, Question 12 C. Identify T.S.2 in the above reaction (options as in A and B).
Solution. Answer (from key): (c). T.S.2 is the transition state for loss of H+ from the σ-complex, so the C–H bond is partly broken (H carries δ+) as aromaticity is restored.
Teacher's Note: T.S.2: C–H bond partly broken as H+ leaves.
Exam Note: Second barrier is lower; proton loss is fast.
Level 2, Question 13 A. Ten structures are shown: a = toluene; b = N,N-dimethylaniline; c = benzenesulfonic acid; d = nitrobenzene; e = anisole; f = acetanilide (PhNHCOCH3); g = phenyltrimethylammonium bromide; h = tert-butylbenzene; i = propiophenone (PhCOEt); j = bromobenzene. Enter one or more letters for each condition. A. Which compounds undergo electrophilic nitration more rapidly than benzene?
Solution. Answer (from key): a, b, e, f, h. Alkyl groups (a, h) and groups with a donor lone pair on the ring atom (NMe2, OCH3, NHCOCH3) activate the ring.
Teacher's Note: Activators: alkyl and groups donating a lone pair.
Exam Note: Bromobenzene is slower than benzene, so excluded.
Level 2, Question 13 B. Using the same ten structures (a–j), which compounds give meta substitution under electrophilic bromination conditions?
Solution. Answer (from key): c, d, g, i. SO3H, NO2, N+(CH3)3 and the acyl group (COEt) withdraw electrons by induction/resonance with no lone pair on the attached atom, so they are meta directing. (Key note: bromobenzene is less reactive than benzene yet o/p directing.)
Teacher's Note: Groups with δ+ or full + on the attached atom are meta directing.
Exam Note: Bromobenzene is o/p directing despite deactivation.
Level 2, Question 14 v. Nitrobenzene is converted to substituted benzenes by reagents chosen from: A = H2, Ni; B = KBr and Cu2Br2; C = KCN and Cu2(CN)2; D = HNO2, 0 °C; E = CH3I and pyridine; F = Cl2 and FeCl3; G = NaOH 10% solution; H = (CH3CO)2O, pyridine; I = HNO3/H2SO4. Give the reagents, in order, for (v): nitrobenzene → 1-bromo-3-chlorobenzene.
Solution. Answer (from key): F, A, D, B. Chlorination goes meta to NO2 (F); H2/Ni reduces NO2 to NH2 (A); HNO2 at 0 °C gives the diazonium salt (D); KBr/Cu2Br2 replaces N2+ by Br (B).
Teacher's Note: Chlorinate meta first, then convert NO2 to Br via diazonium.
Exam Note: Meta product arises only if the nitro group directs first.
Level 2, Question 14 w. Using the reagent list of Question 14 (v): (w) nitrobenzene → 4-nitrobenzonitrile.
Solution. Answer (from key): A, H, I, G, D, C. Reduce to aniline (A); protect as acetanilide (H); nitrate para (I); hydrolyse the amide with NaOH (G); diazotise (D); Sandmeyer with CuCN (C) to put CN in place of the NH2, para to NO2.
Teacher's Note: Protect NH2 as the amide so nitration goes para, then convert NH2 to CN.
Exam Note: Protection avoids oxidation of the amine during nitration.
Level 2, Question 14 x. Using the reagent list of Question 14 (v): (x) nitrobenzene → 4-nitroso-N,N-dimethylaniline.
Solution. Answer (from key): A, E, D. Reduce to aniline (A); methylate nitrogen with CH3I/pyridine to N,N-dimethylaniline (E); HNO2 at 0 °C nitrosates the activated ring para to the NMe2 group (D).
Teacher's Note: Exhaustive N-methylation gives a ring activated enough for nitrosation.
Exam Note: Nitrous acid with a tertiary arylamine gives the p-nitroso compound.
Level 2, Question 14 y. Using the reagent list of Question 14 (v): (y) nitrobenzene → 3,5-diaminochlorobenzene (1-chloro-3,5-diaminobenzene).
Solution. Answer (from key): F, I, A or I, F, A. Both nitro-based routes place Cl and the second NO2 (and so the two NH2 groups after reduction) meta to each other; the final reduction (A) converts both NO2 groups to NH2.
Teacher's Note: Nitro groups direct each other meta; reduce both at the end.
Exam Note: Final reduction gives both NH2 groups together.
Level 2, Question 14 z. Using the reagent list of Question 14 (v): (z) nitrobenzene → a dichloro-diaminobenzene (a ring bearing two NH2 and two Cl, as drawn).
Solution. Answer (from key): A, H, I, F, G, A or A, H, I, F, A, G. Reduce to aniline (A); acetylate (H); nitrate para (I); chlorinate with Cl2/FeCl3 ortho to the NHCOCH3 group, excess allowed (F); hydrolyse the amide (G); reduce the NO2 to NH2 (A). The last two steps may be exchanged.
Teacher's Note: The amide directs chlorine ortho, with nitro already para to it.
Exam Note: Amide hydrolysis and nitro reduction can swap places.
Level 2, Question 15. Match Column I with Column II. Column I (group): (a) –CH=CH–CO2H; (b) –O–S(=O)–CH3; (c) –NH–CO–CH3; (d) –S(=O)–CH3. Column II (effect on the phenyl ring): (p) o/p-directors; (q) meta-directors; (r) activating group; (s) de-activating group.
(a) the conjugated acid withdraws electrons but the vinyl π bond directs o/p. (b) and (c) have O or N attached to the ring whose lone pair activates o/p. (d) sulfoxide is deactivating but o/p directing.
Teacher's Note: Lone pair on the ring-attached atom activates; sulfoxide and cinnamyl acids deactivate but are o/p.
Exam Note: Ring-attached atom lone pair decides activation.
Level 2, Question 16. Match Column I with Column II. Column I: (a) N-phenylpiperidin-2-one (ring attached to the lactam N); (b) cyclohexylbenzene; (c) phenyl vinyl ether (–O–CH=CH2); (d) phenyl ethyl sulfide (–S–Et). Column II: (p) activating group; (q) de-activating group; (r) o/p-director; (s) meta-director.
In all four the atom attached to the ring is N, C(sp3), O or S with a lone pair or alkyl hyperconjugation, so each group activates and directs ortho/para.
Teacher's Note: Lactam N, alkyl, ether O and thioether S all donate to the ring.
Exam Note: All four groups activate; none is meta-directing.
Level 2, Question 17 A. Comprehension: nucleophilic aromatic substitution (SNAr). p-Chloronitrobenzene + CH3ONa (CH3OH, 85 °C) gives p-nitroanisole (92%). A. Match Column I and II for X–C6H4–NO2-4 + CH3ONa. Column I (X = halogen): (a) –F; (b) –Cl; (c) –Br; (d) –I. Column II, relative reactivity towards SNAr: (p) 312; (q) 1; (r) 0.8; (s) 0.6.
Solution. Answer (from key): (a) – p; (b) – q; (c) – r; (d) – s. In SNAr the rate-determining step is nucleophilic attack to form the Meisenheimer complex; the more electronegative halogen (F) makes the ipso carbon more δ+ and stabilises the anion, so F > Cl > Br > I, opposite to SN2.
Teacher's Note: Attack on the ring is the slow step, so electronegativity of X speeds the reaction.
Exam Note: Order F > Cl > Br > I, the reverse of SN2.
Level 2, Question 17 B. If step 2 (loss of halide) were the rate-determining step, which halogen of the aryl halide would be most reactive towards SNAr? (a) Fluoride; (b) Chloride; (c) Bromide; (d) Iodide.
Solution. Answer (from key): (d). If the C–X bond breaks in the slow step, the best leaving group (I–, weakest C–X bond) reacts fastest, giving the order I > Br > Cl > F.
Teacher's Note: If C–X cleavage is rate-determining, the best leaving group wins.
Exam Note: Contrast with part A where attack is slow.
Level 2, Question 17 C. Which of the following is most reactive toward SNAr? (a) 4-chloronitrobenzene; (b) 1-chloro-2,4-dinitrobenzene; (c) 3-chloronitrobenzene; (d) 1-chloro-2,4,6-trinitrobenzene (picryl chloride).
Solution. Answer (from key): (d). Three NO2 groups (two ortho and one para) stabilise the Meisenheimer anion best, so picryl chloride is the most reactive.
Teacher's Note: Most o/p nitro groups give the most stable Meisenheimer complex.
Exam Note: Count o/p NO2 groups relative to Cl.
Level 2, Question 17 D. 1,4-Dichlorobenzene → (HNO3) (A) → (CH3ONa) (B) (major). Product (B) is: four chloro-methoxy-nitrobenzene isomers are drawn; (a) is the isomer with Cl para to OCH3 and NO2 ortho to OCH3, (b), (c) and (d) have the OCH3 and NO2 in other relative positions (as drawn).
Solution. Answer (from key): (a). Nitration gives 2-nitro-1,4-dichlorobenzene (A). Only the Cl ortho to NO2 is activated for SNAr (the other Cl is meta to NO2), so CH3O– replaces that Cl, giving 4-chloro-1-methoxy-2-nitrobenzene (B).
Teacher's Note: Only the chlorine ortho or para to NO2 is displaced.
Exam Note: Pick the halogen activated by the nitro group.
Level 2, Question 17 E. A benzene ring with NO2 at position 1, I at position 3 and Br at position 4 → (1. NaOH, Δ; 2. H3O+) (A). Product (A) is one of four phenols (as drawn): (a), (c) and (d) have OH and the remaining halogen in other positions; (b) has NO2 at the top, I retained and OH at the former Br position.
Solution. Answer (from key): (b). Br is para to NO2 (activated) and I is meta (not activated), so OH– displaces Br only. Acidification gives the phenol: a nitro-iodophenol with the OH at the former Br position and I retained.
Teacher's Note: Only the halide ortho/para to NO2 is substituted.
Exam Note: Meta halide is untouched in SNAr.
Level 2, Question 17 F. Cumulative effect of fluorine activates penta- and hexafluorobenzene towards SNAr. What is compound X in: C6F6 → (HOCH2CH2OH, NaOH, Δ) (A) → (K2CO3, Δ) (X) (C8H4F4O2)? (a) C6F4(OH)(O–CH=CH2); (b) C6F4H–O–CH2CHO; (c) 5,6,7,8-tetrafluoro-2,3-dihydro-1,4-benzodioxine (dioxane ring fused to C6F4); (d) C6F4 with a methyl-1,3-dioxole ring.
Solution. Answer (from key): (c). Ethylene glycol alkoxide displaces F to give C6F5–O–CH2CH2OH (A). K2CO3 then forms the alkoxide, which displaces the adjacent ortho F intramolecularly, closing a six-membered ring: C8H4F4O2 (X), tetrafluorobenzodioxane.
Teacher's Note: Intermolecular SNAr first, then intramolecular ring closure at the neighbouring C–F.
Exam Note: Check formula C8H4F4O2 for the cyclic product.
Level 2, Question 17 G. Which is the best route for the synthesis of 2,4-dinitroanisole (1-methoxy-2,4-dinitrobenzene) starting from benzene? (a) Br2/FeBr3; HNO3/H2SO4; HNO3/H2SO4; NaOCH3/CH3OH. (b) HNO3/H2SO4; HNO3/H2SO4; Br2/FeBr3; NaOCH3/CH3OH. (c) HNO3/H2SO4; Br2/FeBr3; HNO3/H2SO4; NaOCH3/CH3OH. (d) HNO3/H2SO4; Br2/FeBr3; NaOCH3/CH3OH; HNO3/H2SO4.
Solution. Answer (from key): (a). Brominate benzene first; nitrate twice (o/p directing Br puts NO2 para, then ortho) to give 1-bromo-2,4-dinitrobenzene; finally NaOCH3 displaces Br by SNAr (activated by o/p nitro groups). Nitrating first (b–d) puts Br meta to NO2, giving the wrong isomer.
Teacher's Note: Halogen first so nitro groups end up ortho/para to it, then SNAr.
Exam Note: Good order: halogenate, nitrate twice, then substitute with methoxide.
Level 2, Question 18. Identify product (A) and write its structure: triphenylmethane (Ph3CH) → (H+, AlCl3) (A).
Solution. Answer (from key): (A) = 9-phenylfluorene: a fluorene skeleton (two benzene rings joined by a direct bond between two ortho carbons and by a single sp3 carbon C-9) with a phenyl group on C-9.
Teacher's Note: Two rings join through an ortho bond, closing a five-membered ring at the carbon bearing the third phenyl.
Exam Note: Describe the fluorene skeleton, phenyl at C-9.
Subjective Problems
Subjective Problem 1. Phenol → (dil. HNO3) A + B (A more volatile, B less volatile); A or B → (1. Sn/HCl; 2. NaNO2/HCl) C; C + phenol (mild basic condition) → D. Double bond equivalent of D is:
Solution. Answer (from key): 9. Dilute nitric acid gives o-nitrophenol (A, steam volatile, intramolecular H-bond) and p-nitrophenol (B). The nitro compound is reduced and diazotised to the hydroxybenzenediazonium salt C, which couples with phenol (para) to give a hydroxy-azo compound D, HO–C6H4–N=N–C6H4–OH, C12H10N2O2. DBE = (2 × 12 + 2 + 2 – 10)/2 = 9 (two rings = 2, six ring C=C = 6, N=N = 1).
Teacher's Note: Two rings (8 DBE, including their 3 C=C each) plus N=N gives 9.
Exam Note: Show formula and DBE calculation.
Subjective Problem 2. How many isomers x of C8H10 when reacted with hot alkaline KMnO4 give only an aromatic dicarboxylic acid? How many isomers y of C4H8 when reacted with hot alkaline KMnO4 give carbon dioxide? Sum x + y = ?
Solution. Answer (from key): 5. x = 3 (o-, m- and p-xylene give phthalic, isophthalic and terephthalic acids; ethylbenzene gives only benzoic acid). y = 2 (but-1-ene gives CO2 from the =CH2 end, and 2-methylpropene gives CO2 and acetone; 2-butenes give acetic acid, cycloalkanes do not react). x + y = 5.
Teacher's Note: Terminal =CH2 is oxidised to CO2; xylenes give dicarboxylic acids.
Exam Note: Count alkene isomers with a terminal =CH2.
Subjective Problem 3. How many groups are o/p directors in electrophilic aromatic substitution? (i) –NH2; (ii) –CHO; (iii) –N=O; (iv) –COOH; (v) –OMe; (vi) –O–CO–Me; (vii) –Et; (viii) –CO–NH–Me; (ix) –N=NH2; (x) –SO3H.
Solution. Answer (from key): 6. The o/p directors are (i) NH2, (iii) N=O, (v) OMe, (vi) OCOMe, (vii) Et and (ix) the azo-type group –N=NH2. CHO, COOH, CONHMe and SO3H are meta directors.
Teacher's Note: Lone pair or alkyl on the attached atom gives o/p; carbonyl and sulfonyl give meta.
Exam Note: List each group and its directing class; count six.
JEE Mathematics: MS Chauhan Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 12 Aromatic Compounds Part 2
Complete Math Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 12 Aromatic Compounds Part 2
Review detailed solutions for JEE Mathematics. The MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 12 Aromatic Compounds Part 2 PDF provides comprehensive answers mapped to standard MS Chauhan Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Detailed Calculation Guides for JEE
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.