Chemical Equilibrium - Numerical Problems 1-127
Solutions (Numerical Problems)
Question 1. State which one is homogeneous or heterogeneous? (a) SRhombus ⇌ SMonoclinic (b) H2O(l) ⇌ H2O(v) (c) H2O(s) ⇌ H2O(l) (d) CDiamond ⇌ CAmorphous (e) N2(g) + 3H2(g) ⇌ 2NH3(g) (f) CuSO4(s) + 3NH3(l) ⇌ CuSO4·3NH3(l) (g) CaCO3(g) ⇌ CaO(s) + CO2(g)
Solution. A system is said to be homogeneous if the number of phases P = 1; a system with P ≥ 2 is heterogeneous. Rules for counting phases: S + S = number of solids in the mixture (P = number of solids); S + L soluble gives P = 1, insoluble gives P = 2; L + L immiscible gives P = 2, miscible gives P = 1; G + G = 1 (all gases mix, P = 1). Number of phases for (a) to (g): 2, 2, 2, 2, 1, 2, 3. Homogeneous system: (e). Heterogeneous systems: (a), (b), (c), (d), (f), (g).
Teacher's Note: Count distinct phases on both sides together; only one phase (all gases mixed, or one solution) means homogeneous.
Exam Note: State the phase count for each part.
Question 2. Write equilibrium constants for each: (a) KClO3(s) ⇌ KCl(s) + (3/2)O2 (b) H2(g) + 3Fe2O3(s) ⇌ H2O(g) + 2Fe3O4(s) (c) CaC2(s) + 5O2(g) ⇌ 2CaCO3(s) + 2CO2(g) (d) H2(g) + I2(g) ⇌ 2HI(g) (e) N2(g) + 3H2(g) ⇌ 2NH3(g) (f) CH3COOH(l) + CH3OH(l) ⇌ CH3COOCH3(l) + H2O(l)
Solution. Note: (1) Write KP for heterogeneous systems if a gaseous phase is present. (2) Write KC for homogeneous solution phase. (3) Write KP or KC for homogeneous gaseous phase.
(a) KP = (P′O2)3/2
(b) KP = P′H2O/P′H2 = (nH2O/nH2) × [P/Σn]0
(c) KP = (P′CO2)2/(P′O2)5 = [nCO2]2/[nO2]5 × [P/Σn]-3
(d) KP = (P′HI)2/(P′H2 × P′I2) or KC = [HI]2/([H2][I2])
(e) KP = (P′NH3)2/(P′N2(P′H2)3) or KC = [NH3]2/([N2][H2]3)
(f) KC = [CH3COOCH3][H2O]/([CH3COOH][CH3OH])
Teacher's Note: Pure solids and liquids are left out of K for heterogeneous gas systems; in solution phase use concentrations.
Exam Note: Omit pure solids; keep liquids only in solution-phase KC.
Question 3. If a mixture of 3 mole of H2 and one mole of N2 is completely converted into NH3, what would be the ratio of the initial and final volumes at same temperature and pressure?
Solution. N2 + 3H2 ⇌ 2NH3. Initial mole: 1, 3, 0. Final mole: 0, 0, 2 (complete conversion). Ratio of initial and final volumes = initial mole/final mole (V ∝ n if P and T are constant) = 4/2 = 2.
Teacher's Note: At constant P and T, volume is proportional to total moles: 4 mol become 2 mol.
Exam Note: Use V ∝ n; answer 2 : 1.
Question 4. Calculate the equilibrium constant for the reaction H2(g) + CO2(g) ⇌ H2O(g) + CO(g) at 1395 K, if the equilibrium constants at 1395 K for the following are: 2H2O(g) ⇌ 2H2 + O2, K1 = 2.1 × 10-13; 2CO2(g) ⇌ 2CO(g) + O2(g), K2 = 1.4 × 10-12.
Solution. K1 = [H2]2[O2]/[H2O]2 ...(1); K2 = [CO]2[O2]/[CO2]2 ...(2); for CO2 + H2 ⇌ H2O + CO, K = [H2O][CO]/([CO2][H2]) ...(3). By Eqs. (2)/(1): K2/K1 = [CO]2[H2O]2/([CO2]2[H2]2) = K2 (by Eq. 3). So K = √(K2/K1) = √(1.4×10-12/2.1×10-13) = 2.58.
Teacher's Note: Divide the two decomposition constants so O2 cancels; the target reaction's K is the square root.
Exam Note: Show K2/K1 = K2, then root.
Question 5. The equilibrium constant of the reaction SO3(g) ⇌ SO2(g) + ½O2(g) is 0.15 at 900 K. Calculate equilibrium constant for 2SO2(g) + O2(g) ⇌ 2SO3(g).
Solution. For SO3 ⇌ SO2 + ½O2: KC1 = [SO2][O2]1/2/[SO3] = 0.15 ...(1). For 2SO2 + O2 ⇌ 2SO3: KC = [SO3]2/([SO2]2[O2]) ...(2). Reversing Eq. (1): 1/KC1 = [SO3]/([SO2][O2]1/2); squaring gives (1/KC1)2 = KC. So KC = [1/0.15]2 = 44.44 mol-1 litre.
Teacher's Note: Reverse the reaction (take 1/K) and double the equation (square K).
Exam Note: Reverse gives 1/K; doubling squares K.
Question 6. Two equilibria exist together: 2A ⇌ I (K1 forward, K2 reverse) and I ⇌ B + C (K3 forward, K4 reverse). Show that equilibrium constant for overall reaction KC = K1K3/(K2K4).
Solution. For 2A ⇌ I: KC1 = K1/K2 = [I]/[A]2 ...(1). For I ⇌ B + C: KC2 = K3/K4 = [B][C]/[I] ...(2). For 2A ⇌ B + C: KC = [B][C]/[A]2. By Eqs. (1) × (2): KC = KC1 × KC2 = (K1/K2) × (K3/K4) = K1K3/(K2K4).
Teacher's Note: Equilibrium constant of each step is forward over reverse rate constant; overall K is the product of step constants.
Exam Note: Write each K as k(forward)/k(reverse), then multiply.
Question 7. KC for the reaction N2 + 3H2 ⇌ 2NH3 is 0.5 mol-2 litre-2 at 400 K. Find KP. Given R = 0.082 litre atm degree-1 mol-1.
Solution. KP = KC(RT)Δn = 0.5 × (0.082 × 400)-2 = 4.648 × 10-4 (atm)-2.
Teacher's Note: Δn = 2 − 4 = −2; KP = KC(RT)Δn with R in litre atm units.
Exam Note: Get Δn right; include units atm-2.
Question 8. For the reaction A + B ⇌ 3C at 25°C, a 3 litre vessel contains 1, 2, 4 mole of A, B and C respectively. Predict the direction of reaction if: (a) KC for the reaction is 10. (b) KC for the reaction is 15. (c) KC for the reaction is 10.66.
Solution. Before reaction, [A] = 1/3, [B] = 2/3, [C] = 4/3. Thus Q = [C]3/([A][B]) = (43 × 3 × 3)/(33 × 1 × 2) = 64/6 = 10.66. (a) Since KC = 10, Q must decrease to attain KC; thus [C] must decrease or [A] and [B] should increase. Thus, reaction will occur in the backward direction. (b) Since KC = 15, Q must increase to attain KC; thus [C] must increase or [A] and [B] should decrease. Thus, reaction will occur in the forward direction. (c) Q = KC; thus, reaction is in equilibrium.
Teacher's Note: Compare reaction quotient Q with K: Q > K goes backward, Q < K forward, Q = K at equilibrium.
Exam Note: State Q first, then compare with K.
Question 9. At temperature T, a compound AB2(g) dissociates according to the reaction 2AB2(g) ⇌ 2AB(g) + B2(g) with a degree of dissociation 'x' which is small compared to unity. Deduce the expression for 'x' in terms of the equilibrium constant KP and the total pressure P. (IIT 1994)
Solution. Moles before dissociation: AB2 = 1, AB = 0, B2 = 0. After dissociation: (1 − x), x, x/2. Total moles at equilibrium Σn = 1 − x + x + x/2 = 1 + x/2. KP = [nB2 × (nAB)2/(nAB2)2] × [P/Σn]Δn = [(x/2)(x)2/(1 − x)2] × [P/(1 + x/2)]1. Since x is small, 1 − x ≈ 1 and 1 + x/2 ≈ 1, so KP = x3P/2, or x = (2KP/P)1/3.
Teacher's Note: Small-x approximation drops x from (1−x) and (1+x/2), leaving a cube-root dependence on KP/P.
Exam Note: State the approximation 1−x ≈ 1 explicitly.
Question 10. In which case does the reaction go farthest to completion: K = 1; K = 1010; K = 10-10 and why?
Solution. The ratio [Product]/[Reactant] is maximum when K = 1010 and thus reaction goes farthest to completion when K = 1010.
Teacher's Note: K is the product-to-reactant ratio at equilibrium, so the largest K means the most complete conversion.
Exam Note: Larger K means higher product fraction.
Question 11. The equilibrium constant KC for A(g) ⇌ B(g) is 1.1. Which gas has a molar concentration greater than 1?
Solution. For A(g) ⇌ B(g), KC = [B]/[A] = 1.1 ⇒ [B] > [A]. If [B] = 1, [A] = 0.91. Case I: 0.91 < [A] ≤ 1: only [B] > 1. Case II: [A] > 1: both [A] and [B] > 1.
Teacher's Note: Since [B] = 1.1[A], B is always larger than A; A exceeds 1 only in some cases.
Exam Note: Use [B] = 1.1[A] and test cases.
Question 12. The equilibrium constant for the polymerisation of HCHO to C6H12O6 in aqueous solution is 6 × 1022. If 1 M solution of glucose was to reach the equilibrium according to: 6HCHO ⇌ C6H12O6, KC = 6 × 1022, find the concentration of formaldehyde in solution.
Solution. C6H12O6 ⇌ 6HCHO, KC = 1/(6 × 1022). Initial conc.: 1, 0. Conc. at eq.: (1 − α), 6α. KC = (6α)6/(1 − α) = 1/(6×1022) [1 − α ≈ 1 since KC is very small]. (6α)6 = 1.67 × 10-23, or 6 log 6α = −22.78, log 6α = −3.796, 6α = 1.59 × 10-4, α = 2.65 × 10-5 M. Therefore [HCHO] = 6α = 1.59 × 10-4 M.
Teacher's Note: Reverse the polymerisation K, write 6α for HCHO, and neglect α against 1 as K is tiny.
Exam Note: Reverse K first; use 1 − α ≈ 1.
Question 13. In an equilibrium A + B ⇌ C + D; A and B are mixed in a vessel at temperature T. The initial concentration of A was twice the initial concentration of B. After the equilibrium has reached, concentration of C was thrice the equilibrium concentration of B. Calculate KC.
Solution. Let initial [B] = a mol/litre, so [A] = 2a. At equilibrium: A = (2a − x), B = (a − x), C = x, D = x. KC = x·x/((2a − x)(a − x)) ...(1). Given [C] = 3[B]: x = 3(a − x), x = 3a/4 ...(2). By Eqs. (1) and (2): KC = (3a/4 × 3a/4)/((2a − 3a/4)(a − 3a/4)) = 1.8.
Teacher's Note: Assume B's initial concentration as a, use the 3:1 ratio of C to B to get x = 3a/4.
Exam Note: Express everything in terms of a; it cancels.
Question 14. The KC for A2(g) + B2(g) ⇌ 2AB(g) at 100°C is 50. If one litre flask containing one mole of A2 is connected with a two litre flask containing 2 mole of B2, how many mole of AB will be formed at 100°C?
Solution. Initial mole: A2 = 1, B2 = 2, AB = 0. Final mole at equilibrium: (1 − x), (2 − x), 2x. Total volume of both containers on joining becomes 3 litre. [A2] = (1 − x)/3; [B2] = (2 − x)/3; [AB] = 2x/3. KC = [AB]2/([A2][B2]) = 4x2/(2 − 3x + x2) = 50, so 4x2 = 100 − 150x + 50x2, or 46x2 − 150x + 100 = 0; x = 0.93 and 2.326, which is not valid since x ≯ 2. Mole of AB = 2x = 2(0.93) = 1.86.
Teacher's Note: Volumes add to 3 L; Δn = 0 so V cancels, and the quadratic root above 2 is rejected.
Exam Note: Reject the root exceeding the available B2.
Question 15. For a gaseous phase reaction, A + 2B ⇌ AB2, KC = 0.3475 litre2 mol-2 at 200°C. When 2 mole of B are mixed with one mole of A, what total pressure is required to convert 60% of A in AB2?
Solution. Initial mole: A = 1, B = 2, AB2 = 0. At equilibrium: (1 − x), (2 − 2x), x. Total mole at equilibrium = 3 − 2x. Let pressure at equilibrium be P. KP = [nAB2/(nA(nB)2)] × (P/Σn)Δn = x(3 − 2x)2/((1 − x)(2 − 2x)2·P2) ...(1). Given x = 0.6 and Δn = −2: KP = KC(RT)Δn = 0.3475 × (0.0821 × 473)-2 ...(2). By Eqs. (1) and (2): 0.3475 × (0.0821 × 473)-2 = 0.6(3 − 1.2)2/(P2(1 − 0.6)(2 − 1.2)2) = 0.6 × (1.8)2/(P2(0.4)(0.8)2). P = 181.5 atm.
Teacher's Note: Convert KC to KP with Δn = −2, then express KP via mole fractions at 60% conversion.
Exam Note: Use T = 473 K and Δn = −2.
Question 16. For a gaseous phase reaction, 2HI ⇌ H2 + I2, at equilibrium 7.8 g, 203.2 g and 1638.4 g of H2, I2 and HI respectively were found in 5 litre vessel. Calculate KC. If all the reactants and products are transferred to a 2 litre vessel, what will be the amount of reactants and products at equilibrium?
Solution. Mole at equilibrium: HI = 1638.4/128 = 12.8; H2 = 7.8/2 = 3.9; I2 = 203.2/254 = 0.8. Let volume of container be V litre. KC = [H2][I2]/[HI]2 = (3.9 × 0.8)/(V × V × (12.8/V)2) = 0.019. For the given reaction Δn = 0 and thus there will be no effect on equilibrium concentration of reactants and products if the matter is transferred to attain equilibrium in 2 litre vessel (the amounts remain 12.8 mol HI, 3.9 mol H2, 0.8 mol I2).
Teacher's Note: Volume cancels when Δn = 0, so changing the vessel size leaves the mole amounts unchanged.
Exam Note: Δn = 0 means volume change has no effect.
Question 17. 60 mL of H2 and 42 mL of I2 are heated in a closed vessel. At equilibrium the vessel contains 28 mL HI. Calculate degree of dissociation of HI.
Solution. H2 + I2 ⇌ 2HI. Volume at t = 0: 60, 42, 0. Volume at equilibrium: (60 − x), (42 − x), 2x. Given 2x = 28, so x = 14: volumes are 46, 28, 28. Since at constant P and T, mole ∝ volume of gas (PV = nRT), volume of gases can be directly used as concentration; this can be done only for reactions having Δn = 0. KC = (28 × 28)/(46 × 28) = 28/46. For dissociation of HI: 2HI ⇌ H2 + I2, mole at t = 0: 1, 0, 0; at equilibrium (1 − α), α/2, α/2. KC1 = α2/(4(1 − α)2) = 1/KC. So α/(2(1 − α)) = √(46/28), giving α = 0.719 or 71.9%.
Teacher's Note: Because Δn = 0, volumes can replace moles; dissociation K is the reciprocal of formation K.
Exam Note: Dissociation constant = 1/K of formation.
Question 18. In the dissociation of HI, 20% of HI is dissociated at equilibrium. Calculate KP for HI(g) ⇌ ½H2(g) + ½I2(g).
Solution. HI ⇌ ½H2 + ½I2. Initial mole: 1, 0, 0. At equilibrium: (1 − α), α/2, α/2. Where α is degree of dissociation and volume of container is V litre. KP = KC = (α/2V)1/2(α/2V)1/2/((1 − α)/V) = α/(2(1 − α)) = 0.2/(2(1 − 0.2)) (since α = 0.2). KP = KC = 0.125.
Teacher's Note: Δn = 0 so KP = KC, and the volume V cancels in the expression.
Exam Note: Write moles at equilibrium as 1−α, α/2, α/2.
Question 19. The value of KP for dissociation of 2HI ⇌ H2 + I2 is 1.84 × 10-2. If the equilibrium concentration of H2 is 0.4789 mol litre-1, calculate the concentration of HI at equilibrium.
Solution. Given KP = 1.84 × 10-2; since Δn = 0, KP = KC = 1.84 × 10-2. At equilibrium [H2] = [I2] = 0.4789 mol litre-1, [HI] = a. KC = [H2][I2]/[HI]2 = (0.4789 × 0.4789)/a2, so a2 = (0.4789 × 0.4789)/(1.84 × 10-2), a = 3.53. [HI] at equilibrium = 3.53 mole litre-1.
Teacher's Note: H2 and I2 form in equal amounts, so both are 0.4789 M; Δn = 0 gives KP = KC.
Exam Note: State KP = KC because Δn = 0.
Question 20. The KP value for the reaction H2 + I2 ⇌ 2HI, at 460°C is 49. If the initial pressure of H2 and I2 is 0.5 atm respectively, determine the partial pressure of each gas at equilibrium. (Roorkee 1999)
Solution. H2 + I2 ⇌ 2HI. Initial pressure: 0.5, 0.5, 0. At eq.: (0.5 − x), (0.5 − x), 2x. KP = (2x)2/(0.5 − x)2 = 49, or 2x/(0.5 − x) = 7, or 2x = 3.5 − 7x, or 9x = 3.5, x = 3.5/9 = 0.389. At equilibrium: P′H2 = 0.5 − 0.389 = 0.111 atm; P′I2 = 0.5 − 0.389 = 0.111 atm; P′HI = 0.389 × 2 = 0.778 atm.
Teacher's Note: Take the square root of the KP expression to avoid a quadratic when reactant pressures are equal.
Exam Note: Take square root of both sides; check total 1 atm.
Question 21. One mole of H2, two mole of I2 and three mole of HI are injected in one litre flask. What will be the concentration of H2, I2 and HI at equilibrium at 500°C? KC for reaction H2 + I2 ⇌ 2HI is 45.9.
Solution. Initial mole: H2 = 1, I2 = 2, HI = 3. At equilibrium: (1 − x), (2 − x), (3 + 2x). Let volume be V litre. KC = [HI]2/([H2][I2]) = (3 + 2x)2/((1 − x)(2 − x)) = 45.9, i.e. 45.9 = (9 + 4x2 + 12x)/(2 − 3x + x2), so x = 0.684. Hence (V = 1 litre): [H2] = 1 − 0.684 = 0.316 mol litre-1; [I2] = 2 − 0.684 = 1.316 mol litre-1; [HI] = 3 + 2(0.684) = 4.368 mol litre-1.
Teacher's Note: HI is already present initially, so equilibrium HI is 3 + 2x; solve the quadratic, keep root below 1.
Exam Note: Choose the quadratic root with x < 1.
Question 22. 0.96 g of HI were heated to attain equilibrium 2HI ⇌ H2 + I2. The reaction mixture on titration requires 15.7 mL of N/10 hypo solution. Calculate degree of dissociation of HI.
Solution. 2HI ⇌ H2 + I2. Mole at t = 0: 0.96/128 = 7.5 × 10-3, 0, 0. Mole at equilibrium: (7.5 × 10-3 − x), x/2, x/2. Meq. of I2 formed at equilibrium = Meq. of hypo used: (WI2/E) × 1000 = 15.7 × 1/10, so (W/E) of I2 = 1.57 × 10-3. Mole of I2 formed = 1.57 × 10-3/2 = 0.785 × 10-3. x/2 = 0.785 × 10-3, x = 1.57 × 10-3. Degree of dissociation of HI αHI = mole dissociated/mole taken = 1.57 × 10-3/7.5 × 10-3 = 0.209 or 20.9%.
Teacher's Note: Iodine liberated is found by iodometric titration with hypo (equivalents of I2 equal equivalents of hypo).
Exam Note: Meq of I2 = meq of hypo; n-factor 2.
Question 23. The degree of dissociation of HI at a particular temperature is 0.8. Calculate the volume of 2M Na2S2O3 solution required to neutralise the iodine present in an equilibrium mixture of a reaction when 2 mole each of H2 and I2 are heated in a closed vessel of 2 litre capacity.
Solution. Given α for HI = 0.8. 2HI ⇌ H2 + I2: before dissociation 1, 0, 0; after dissociation (1 − α), α/2, α/2. KC = α2/(4(1 − α)2) = (0.8)2/(4(1 − 0.8)2) = 4. Now H2 + I2 ⇌ 2HI: initial mole 2, 2, 0; after reaction (2 − x), (2 − x), 2x. K′C = 1/KC = 4x2/(2 − x)2 = 1/4, so 2x/(2 − x) = 1/2, x = 2/5. Thus I2 left = 2 − 2/5 = 8/5 mole = (8/5) × 2 equivalent. Meq. of Na2S2O3 = Meq. of I2 left: 2 × V = (8/5) × 2 × 1000, so V = 1600 mL = 1.6 litre.
Teacher's Note: Get K from α, find leftover I2 from the new mixture; hypo reacts at 2 equivalents per mole.
Exam Note: 2M hypo is 2 N here; equate milliequivalents.
Question 24. The activation energy of H2(g) + I2(g) ⇌ 2HI in equilibrium for the forward reaction is 167 kJ mol-1 whereas for the reverse reaction is 180 kJ mole-1. The presence of catalyst lowers the activation energy by 80 kJ mol-1. Assuming that the reactions are made at 27°C and the frequency factor for forward and reverse reactions are 4 × 10-4 and 2 × 10-3 respectively, calculate KC.
Solution. The lowering of activation energy by a catalyst occurs for the forward reaction as well as for the backward reaction. In presence of catalyst, energy of activation for forward reaction Ea1 = 167 − 80 = 87 kJ mol-1; for backward reaction Ea2 = 180 − 80 = 100 kJ mol-1. K1 = A1e−Ea1/RT, K2 = A2e−Ea2/RT, where A1, A2 are frequency factors. KC = K1/K2 = (A1/A2)·e[(−Ea1/RT) + (Ea2/RT)] = (4 × 10-4/2 × 10-3) × e(−87 + 100)/(8.314 × 10-3 × 300) = 2 × 10-1 e+13/(8.314 × 300 × 10-3). KC = 36.8.
Teacher's Note: A catalyst lowers both activation energies equally, so KC is fixed by the difference Ea2 − Ea1 = 13 kJ.
Exam Note: Use K = kf/kb with Arrhenius expressions.
Question 25. A reversible reaction H2(g) + I2(g) ⇌ 2HI(g) in equilibrium has [H2] = 0.5, [I2] = 0.5 and [HI] = 1.23 in one litre flask. If suddenly 0.6 mole of HI is removed, find out the new equilibrium concentrations.
Solution. KC = [1.23]2/(0.5 × 0.5) = 6.05. On removing 0.60 mole of HI the reaction will proceed in forward direction: new conc. H2 0.5, I2 0.5, HI 0.63; eq. conc. (0.5 − X), (0.5 − X), (0.63 + 2X). 6.05 = (0.63 + 2X)2/((0.5 − X)(0.5 − X)), or X = 0.134. [I2] = [H2] = 0.5 − 0.134 = 0.366; [HI] = 0.63 + (2 × 0.134) = 0.898.
Teacher's Note: Removing a product disturbs equilibrium: Q < K, so the reaction shifts forward; recompute K first from the original data.
Exam Note: Compute K before the disturbance, then re-equilibrate.
Question 26. At 700 K, hydrogen and bromine react to form hydrogen bromide. The value of equilibrium constant for this reaction is 5 × 108. Calculate the mole of H2, Br2 and HBr at equilibrium if a mixture of 0.6 mole of H2 and 0.2 mole of Br2 is heated to 700 K. (Roorkee 1995)
Solution. The exceptionally high value of KC = 5 × 108 suggests that the reaction goes almost to completion. H2 + Br2 ⇌ 2HBr: before reaction 0.6, 0.2, 0; at equilibrium 0.4, 0, 0.4. Thus HBr = 0.4 mol, H2 = 0.4 mol, Br2 = 0.0. Note: if the concentration of Br2 is needed at equilibrium, it may be calculated as follows ([Br2] is insignificant): 2HBr ⇌ H2 + Br2: 0.4, 0.4, 0 → (0.4 − 2x), (0.4 + x), x. KC = 1/(5 × 108) = (0.4 + x)x/(0.4 + 2x)2 = 0.4 × x/(0.4)2, so x = 8 × 10-10 mol.
Teacher's Note: A huge K means complete conversion of the limiting reagent Br2; back-calculate the tiny leftover from the reverse reaction.
Exam Note: Limiting reagent is consumed; leftover Br2 ≈ 10-9 mol.
Question 27. A sample of air consisting of N2 and O2 was heated to 2500 K until the equilibrium N2(g) + O2(g) ⇌ 2NO(g) was established with an equilibrium constant KC = 2.1 × 10-3. At equilibrium, the mole % of NO was 1.8. Estimate the initial composition of air in mole fraction of N2 and O2. (Roorkee May 1997)
Solution. Let N2 = a and O2 = (100 − a) (per 100 mole) initially. At equilibrium: N2 = (a − x), O2 = (100 − a − x), NO = 2x. Given 2x/100 = 1.8/100, so x = 0.9. KP = KC = [NO]2/([N2][O2]) = (2x)2/((a − x)(100 − a − x)) = 2.1 × 10-3. Therefore a = 79%; 100 − a = 21%. Note: two values of 'a' are obtained, a = 79% and a = 21%. Note that air contains more N2 than O2; thus a = 79%.
Teacher's Note: Solve the quadratic for the N2 percentage; two roots (about 79 and 21) arise, and air has more N2.
Exam Note: Reject root 21% because air is mostly N2.
Question 28. KC for CO(g) + H2O(g) ⇌ CO2(g) + H2(g) at 986°C is 0.63. A mixture of 1 mole H2O(g) and 3 mole CO(g) is allowed to react to come to an equilibrium. The equilibrium pressure is 2.0 atm. (i) How many mole of H2 are present at equilibrium? (ii) Calculate the partial pressure of each gas at equilibrium. (Roorkee 1992)
Solution. (i) CO + H2O ⇌ CO2 + H2. Initial mole: 3, 1, 0, 0. Mole at equilibrium: (3 − x), (1 − x), x, x. Total mole at equilibrium = 3 − x + 1 − x + x + x = 4. KC = x2/((3 − x)(1 − x)) = 0.63, i.e. x2/(3 + x2 − 4x) = 0.63, x = 0.681. Mole of H2 formed = 0.681. (ii) Total pressure = 2 atm, total mole = 4, P′g = PM × mole fraction of that gas. P′CO2 = P′H2 = x·P/4 = 0.681 × 2/4 = 0.34 atm; P′CO = (3 − x)·P/4 = 1.16 atm; P′H2O = (1 − x)·P/4 = 0.16 atm.
Teacher's Note: Δn = 0 so volume cancels; partial pressure equals mole fraction times total pressure of 2 atm.
Exam Note: Use mole fraction × total pressure for each gas.
Question 29. An equilibrium mixture of CO(g) + H2O(g) ⇌ CO2(g) + H2(g) present in a vessel of one litre capacity at 815°C was found by analysis to contain 0.4 mole of CO, 0.3 mole of H2O, 0.2 mole of CO2 and 0.6 mole of H2. (a) Calculate KC. (b) If it is desired to increase the concentration of CO to 0.6 mole by adding CO2 to the vessel, how many mole must be added into equilibrium mixture at constant temperature in order to get this change?
Solution. (a) Mole at equilibrium: CO 0.4, H2O 0.3, CO2 0.2, H2 0.6. KC = [CO2][H2]/([CO][H2O]) = (0.2 × 0.6)/(0.4 × 0.3) = 1 (Δn = 0, so volume terms are not needed). (b) Now it is desired to increase the conc. of CO by 0.2 at equilibrium by forcing CO2 into the equilibrium mixture. Suppose a mole of CO2 are forced in the vessel at equilibrium; by doing so the reaction proceeds in backward direction, i.e., CO2 + H2 ⇌ CO + H2O. Addition at initial equilibrium: (0.2 + a), 0.6, 0.4, 0.3. Mole at new equilibrium: (0.2 + a − 0.2) = a, (0.6 − 0.2) = 0.4, (0.4 + 0.2) = 0.6, (0.3 + 0.2) = 0.5. 1/KC = [CO][H2O]/([CO2][H2]) = (0.6 × 0.5)/(a × 0.4), so a = 0.75 mol.
Teacher's Note: Adding CO2 pushes the reaction backward; every 0.2 mol CO gained consumes 0.2 mol CO2 and H2.
Exam Note: Track changes with a stoichiometry table; K = 1 here.
Question 30. A mixture of one mole of CO2 and one mole of H2 attains equilibrium at a temperature of 0.1 atm pressure for the change CO2(g) + H2(g) ⇌ CO(g) + H2O(g) if the analysis of final reaction mixture shows 0.16 volume per cent of CO. Calculate KP.
Solution. CO2 + H2 ⇌ CO + H2O. Mole at t = 0: 1, 1, 0, 0. Mole at equilibrium: (1 − x), (1 − x), x, x. Given vol. % of CO = 0.16, so mole of CO = x. Total mole at equilibrium = 1 − x + 1 − x + x + x = 2. x/2 = 0.16/100, so x = 0.0032. KC = KP = x2/(1 − x)2 (Δn = 0, volume terms are not needed) = (0.0032)2/(1 − 0.0032)2 = 1.03 × 10-5.
Teacher's Note: Volume per cent equals mole per cent, so x/2 = 0.0016; Δn = 0 makes KP = KC.
Exam Note: Volume % equals mole % for gases.
Question 31. At 700 K, CO2 and H2 react to form CO and H2O. For this purpose KC is 0.11. If a mixture of 0.45 mole of CO2 and 0.45 mole of H2 is heated to 700 K. (a) Find out mole of each gas at equilibrium. (b) When equilibrium has been reached, another 0.34 mole of CO2 and 0.34 mole of H2 are added to the reaction mixture. Find composition of mixture at new equilibrium.
Solution. (a) CO2 + H2 ⇌ CO + H2O (KC = 0.11). Mole at t = 0: 0.45, 0.45, 0, 0. At equilibrium: (0.45 − x), (0.45 − x), x, x. KC = 0.11 = x·x/(0.45 − x)2 (Δn = 0, volume terms are not needed), so x/(0.45 − x) = 0.3317, x = 0.112. Mole of CO2 = mole of H2 = 0.45 − 0.112 = 0.338 mol; mole of CO = mole of H2O = 0.112 mol. (b) Total CO2 and H2 taken (equivalent initial mixture) = 0.45 + 0.34 = 0.79 mole each. At new equilibrium: (0.79 − x), (0.79 − x), x, x. KC = x2/(0.79 − x)2 = 0.11, so x = 0.197. Mole of CO2 = mole of H2 = 0.79 − 0.197 = 0.593 mol; mole of CO = mole of H2O = 0.197 mol.
Teacher's Note: Adding more of both reactants is equivalent to starting afresh with 0.79 mol each; Δn = 0 so volume cancels.
Exam Note: Treat total added reactants as a fresh start.
Question 32. At a certain temperature, KC for SO2(g) + NO2(g) ⇌ SO3(g) + NO(g) is 16. If we take one mole of each of all the four gases in one litre container, what would be the equilibrium concentrations of NO and NO2?
Solution. Mole at t = 0: SO2 1, NO2 1, SO3 1, NO 1. At equilibrium: (1 − x), (1 − x), (1 + x), (1 + x). KC = [(1 + x)/V]2/[(1 − x)/V]2 = (1 + x)2/(1 − x)2 = 16. So (1 + x)/(1 − x) = 4, x = 3/5 = 0.6. Volume = 1 litre, so [SO2] = [NO2] = 1 − x = 1 − 0.6 = 0.4 mol litre-1; [SO3] = [NO] = 1 + x = 1 + 0.6 = 1.6 mol litre-1.
Teacher's Note: Products are present initially, so they grow to 1 + x; the square root of K gives a linear equation.
Exam Note: Take square root of K; no quadratic needed.
Question 33. A mixture of SO3, SO2 and O2 gases is maintained in 10 litre flask at a temperature at which KC for the reaction 2SO2(g) + O2(g) ⇌ 2SO3(g) is 100 mol-1 litre. (a) If no. of mole of SO3 and SO2 in flask are same, how many mole of O2 are present? (b) If no. of mole of SO3 in flask are twice the no. of mole of SO2, how many mole of O2 are present?
Solution. KC = 100 = [SO3]2/([SO2]2[O2]) ...(1). (a) [SO3] = [SO2]: by Eq. (1), 100 = 1/[O2], or [O2] = 1/100, i.e. mole of O2/volume = 1/100 (V = 10 litre). Mole of O2 = (1/100) × 10 = 0.1. (b) [SO3] = 2[SO2]: by Eq. (1), 100 = 4/[O2], or [O2] = 4/100. Mole of O2 = (4/100) × 10 = 0.4.
Teacher's Note: Substitute the given ratio into KC to get [O2], then multiply by the 10 L volume to get moles.
Exam Note: Convert concentration to moles using volume.
Question 34. At 627°C and one atmosphere pressure SO3 is partially dissociated into SO2 and O2 by SO3(g) ⇌ SO2(g) + ½O2(g). The density of the equilibrium mixture is 0.925 g/litre. What is the degree of dissociation?
Solution. For the equilibrium mixture PV = (w/m)RT, so molar mass of mixture = wRT/(VP). With w/V = 0.925 g/L, T = 900 K, P = 1 atm, R = 0.0821: molar mass of mixture = (0.925 × 0.0821 × 900)/1 = 68.35. Experimental molar mass of SO3 = 68.35; normal molar mass of SO3 = 80. SO3 ⇌ SO2 + ½O2: mole before equilibrium 1, 0, 0; at equilibrium (1 − α), α, α/2, where α is degree of dissociation. 1/(normal molar mass) ∝ number of particles before dissociation, i.e. 1; 1/(apparent molar mass) ∝ number of particles after dissociation, i.e. 1 + α/2. Normal molar mass/apparent molar mass = 1 + α/2, so 1 + α/2 = 80/68.35. α = 0.3408 or 34.08%.
Teacher's Note: Density gives apparent molar mass; the ratio of normal to apparent molar mass equals the particle increase 1 + α/2.
Exam Note: Use T = 900 K; compare normal and apparent molar mass.
Question 35. The equilibrium constant KP of the reaction 2SO2 + O2 ⇌ 2SO3 is 900 atm-1 at 800 K. A mixture containing SO3 and O2 having initial pressure of 1 atm and 2 atm respectively is heated at constant volume to equilibriate. Calculate partial pressure of each gas at 800 K at equilibrium.
Solution. Consider the reaction 2SO3 ⇌ 2SO2 + O2; KP = 1/900 atm. Initial pressure: 1, 0, 2. Pressures left at equilibrium: (1 − x), x, (2 + x/2). KP = (P′SO2)2(P′O2)/(P′SO3)2, so 1/900 = x2(2 + x/2)/(1 − x)2. Since KP of this reaction is small, x <<< 1, so x3 is negligible: 1/900 = 2x2/(1 − x)2, i.e. 1/30 = √2·x/(1 − x). Corrected: solving this gives x = 0.0230 (the book's printed x = 0.0236 is slightly off; the unapproximated equation also gives x = 0.0230). At equilibrium: P′SO3 = 1 − x = 0.977 atm; P′SO2 = x = 0.0230 atm; P′O2 = 2 + x/2 = 2.0115 atm. (Book printed: 0.9764, 0.0236, 2.0118 atm.)
Teacher's Note: The mixture starts with no SO2, so decomposition proceeds; x is tiny, letting you drop x in 2 + x/2.
Exam Note: Reverse the reaction K; neglect x against 1 and 2.
Question 36. The equilibrium mixture for 2SO2(g) + O2(g) ⇌ 2SO3(g) present in 1 litre vessel at 600°C contains 0.50, 0.12 and 5.0 mole of SO2, O2 and SO3 respectively. (a) Calculate KC for the given change at 600°C. (b) Also calculate KP. (c) How many mole of O2 must be forced into the equilibrium vessel at 600°C in order to increase the concentration of SO3 to 5.2 mole?
Solution. Volume = 1 litre. (a) KC = [SO3]2/([SO2]2[O2]) = (5)2/((0.5)2(0.12)) = 833.33 mol-1 litre. (b) KP = KC(RT)Δn = 833.33 × (0.0821 × 873)-1 = 11.62 (atm)-1 (11.63 with unrounded arithmetic). (c) Let a mole of O2 be introduced to increase SO3 to 5.2 mole. Thus 0.2 mole of SO2 and 0.1 mole of O2 will be consumed in the forward reaction. At 1 equilibrium: 0.5, 0.12, 5; new equilibrium: (0.5 − 0.2), (0.12 + a − 0.1), 5.2. 833.33 = (5.2)2/((0.3)2(0.02 + a)) hence a = 0.34 mol.
Teacher's Note: Adding O2 pushes the reaction forward; each 0.2 mol SO3 gained uses 0.2 mol SO2 and 0.1 mol O2.
Exam Note: Δn = −1 for KP; T = 873 K.
Question 37. At 273 K and one atm, 'a' litre of N2O4 decomposes to NO2 according to equation N2O4(g) ⇌ 2NO2(g). To what extent has the decomposition proceeded when the original volume is 25% less than the existing volume?
Solution. N2O4 ⇌ 2NO2. Mole before equilibrium: a, 0. Mole at equilibrium: (a − x), 2x. Given original volume = (75/100) × existing volume at equilibrium. Since mole ∝ volume (at constant P and T), initial mole = (75/100) × mole at equilibrium: a = (75/100)(a + x), so x = (25/75)a = 0.33a. % decomposition (α) = x/a = 0.33a/a = 0.33 or 33%.
Teacher's Note: Moles are proportional to volume at fixed P and T; total moles at equilibrium are a + x.
Exam Note: Use V ∝ n; α = x/a.
Question 38. The KP for the reaction N2O4 ⇌ 2NO2 is 640 mm at 775 K. Calculate the percentage dissociation of N2O4 at equilibrium pressure of 160 mm. At what pressure, the dissociation will be 50%? (Roorkee 1997)
Solution. N2O4 ⇌ 2NO2. Mole before equilibrium 1, 0; at equilibrium (1 − x), 2x. KP = [4x2/(1 − x)] × [P/Σn]Δn, so 640 = [4x2/((1 − x)(1 + x))] × 160, hence 4 = 4x2/(1 − x2), 1 − x2 = x2, 2x2 = 1, x2 = 1/2, x = 0.707 = 70.7%. Also, for x = 0.5: 640 = [4 × (0.5)2/0.5] × P/1.5, hence P = 480 mm.
Teacher's Note: Σn = 1 + x; at lower pressure dissociation rises, so 50% dissociation needs a higher pressure than 160 mm.
Exam Note: Σn = 1 + x; state units mm Hg.
Question 39. 0.1 mole of N2O4(g) was sealed in a tube under atmospheric conditions at 25°C. Calculate the number of mole of NO2(g) present, if the equilibrium N2O4(g) ⇌ 2NO2(g), (KP = 0.14) is reached after sometime.
Solution. N2O4 ⇌ 2NO2: 0.1, 0 → (0.1 − α), 2α. Since P ∝ n (V and T constant), 1 atm ∝ 0.1 and P ∝ 0.1 + α, so P = (0.1 + α)/0.1. KP = [(2α)2/(0.1 − α)] × [P/(0.1 + α)]1 = 40α2/(0.1 − α) = 0.14. Hence α = 0.017 and NO2 = 0.017 × 2 = 0.034 mol.
Teacher's Note: Sealed tube means fixed volume, so pressure scales with total moles.
Exam Note: Fixed volume: pressure scales with total moles.
Question 40. The degree of dissociation of N2O4 into NO2 at one atmosphere and 40°C is 0.310. Calculate its KP at 40°C. Also report the degree of dissociation at 10 atm pressure at same temperature.
Solution. N2O4 ⇌ 2NO2. Initial mole 1, 0. Mole at equilibrium (1 − 0.310) = 0.69 and 2 × 0.310 = 0.62 (given α = 0.31). Total mole at equilibrium = 0.69 + 0.62 = 1.31. KP = [(nNO2)2/nN2O4] × (P/Σn)Δn = (0.62)2/(0.69) × (1/1.31)1 (Δn = 1, P = 1 atm) = 0.425 atm. For dissociation at 10 atm pressure at 40°C: KP = [4α2/(1 − α)] × [10/(1 + α)], so 0.425 = 4α2 × 10/(1 − α2), giving α = 10.25%.
Teacher's Note: Use KP from 1 atm data; at 10 atm higher pressure suppresses dissociation (Le Chatelier).
Exam Note: KP is unchanged by pressure; only α changes.
Question 41. At 340 K and one atmosphere pressure, N2O4 is 66% into NO2. What volume of 10 g N2O4 occupy under these conditions?
Solution. N2O4 ⇌ 2NO2. Mole before equilibrium 1, 0; after equilibrium (1 − α), 2α (α = degree of dissociation). Total mole at equilibrium = 1 + α = 1 + 0.66 = 1.66 (α = 0.66). If 1 mole of N2O4 is taken, mole at equilibrium = 1.66; if 10/92 mole of N2O4 is taken, mole at equilibrium = 1.66 × 10/92 = 0.18. PV = (w/m)RT: 1 × V = 0.18 × 0.0821 × 340, V = 5.02 litre. Thus, volume of 10 g N2O4 under above condition is 5.02 litre (5.04 L using unrounded 0.1804 mol).
Teacher's Note: Dissociation raises total moles to 1.66 per mole of N2O4 taken; apply PV = nRT to that total.
Exam Note: Use total moles after dissociation in PV = nRT.
Question 42. N2O4 dissociates as N2O4 ⇌ 2NO2. At 55°C and one atmosphere, % decomposition of N2O4 is 50.3%. At what P and same temperature will the equilibrium mixture have the ratio of N2O4 : NO2 as 1 : 8?
Solution. N2O4 ⇌ 2NO2: mole before equilibrium 1, 0; at equilibrium 1 − α, 2α, where α = 0.503. KP = [(nNO2)2/nN2O4] × (P/Σn)Δn = (2α)2/(1 − α) × P/(1 + α) = 4α2P/(1 − α2) = 4 × (0.503)2 × 1/(1 − (0.503)2) = 1.355. Now at pressure P: N2O4 (1 − x), NO2 2x. Given N2O4/NO2 = (1 − x)/2x = 1/8, so x = 8/10 = 0.8. Using again at pressure P: KP = 4x2P/(1 − x2), 1.355 = 4 × (0.8)2 × P/(1 − (0.8)2), so P = 0.19 atm.
Teacher's Note: Get KP from the 50.3% data; the 1:8 ratio gives α = 0.8, requiring a much lower pressure.
Exam Note: KP same at same T; higher α needs lower P.
Question 43. An equilibrium mixture at 300 K contains N2O4 and NO2 at 0.28 and 1.1 atmosphere respectively. If the volume of container is doubled, calculate the new equilibrium pressure of two gases. (Roorkee 1991)
Solution. N2O4 ⇌ 2NO2; pressure at equilibrium 0.28, 1.1. KP = (PNO2)2/PN2O4 = (1.1)2/0.28 = 4.32 atm. Now if the volume of container is doubled, i.e., pressure decreases and will become half, the reaction will proceed in the direction where the reaction shows an increase in mole, i.e., decomposition of N2O4 is favoured. New pressure at equilibrium: N2O4 = (0.28/2 − P), NO2 = (1.1/2 + 2P), where reactant N2O4 equivalent to pressure P is used up in doing so. KP = [1.1/2 + 2P]2/[0.28/2 − P] = [0.55 + 2P]2/[0.14 − P] = 4.32, so P = 0.045. Now PN2O4 = 0.14 − 0.045 = 0.095 atm; PNO2 at new eq. = 0.55 + 2 × 0.045 = 0.64 atm.
Teacher's Note: Doubling volume halves each partial pressure first; Q falls below K, so N2O4 dissociates further.
Exam Note: Halve pressures first, then shift forward.
Question 44. At 25°C and 1 atmospheric pressure, the partial pressures in equilibrium mixture of gaseous N2O4 and NO2 are 0.7 and 0.3 atm respectively. Calculate the partial pressures of these gases when they are in equilibrium at 25°C and a total pressure of 10 atm.
Solution. N2O4 ⇌ 2NO2; pressure at equilibrium 0.7, 0.3. KP = (PNO2)2/PN2O4 = (0.3 × 0.3)/0.7 = 0.1286 atm. Now assume decomposition at 10 atm pressure: initial mole 1, 0; at equilibrium (1 − x), 2x. KP = [(nNO2)2/nN2O4] × (P/Σn)Δn = [(2x)2/(1 − x)] × [10/(1 + x)]1, or 0.1286 = 4x2 × 10/(1 − x2), so x = 0.0565. P′NO2 = [2x/(1 + x)] × P = 2 × 0.0565 × 10/(1 + 0.0565) = 1.07 atm; P′N2O4 = [(1 − 0.0565)/(1 + 0.0565)] × 10 = 8.93 atm.
Teacher's Note: Find KP from the first mixture; apply it at total pressure 10 atm using mole fractions (1−x)/(1+x) and 2x/(1+x).
Exam Note: Check partial pressures sum to 10 atm.
Question 45. An equilibrium mixture of N2O4 (0.98 mole) and NO2 (0.06 mole) in a 0.750 litre flask at 27°C is expanded through an evacuated flask of 2.250 litre at 27°C. What are the new concentrations of N2O4 and NO2 in equilibrium?
Solution. N2O4 ⇌ 2NO2. KC = [NO2]2/[N2O4] = (0.06)2/(0.750 × 0.98) = 4.90 × 10-3. If V = 0.750 + 2.250 = 3 litre, i.e. volume increases and the reaction will proceed in forward reaction: N2O4 (0.98 − x), NO2 (0.06 + 2x). 4.90 × 10-3 = (0.06 + 2x)2/(3 × (0.98 − x)), or x = 0.029. [N2O4] = (0.98 − 0.029)/3 = 0.317 mol litre-1; [NO2] = (0.06 + 0.029 × 2)/3 = 0.039 mol litre-1.
Teacher's Note: KC uses moles/volume; expanding to 3 L favours more NO2, so recompute the equilibrium with V = 3 L.
Exam Note: Use total volume 3 L for concentrations.
Question 46. Prove α = √(KP/(P + KP)) for PCl5 ⇌ PCl3 + Cl2; where α is degree of dissociation at temperature when equilibrium constant is KP.
Solution. PCl5 ⇌ PCl3 + Cl2. Initial mole 1, 0, 0; mole at equilibrium 1 − α, α, α, where α is degree of dissociation. P′Cl2 = [α/(1 + α)] × P; P′PCl3 = [α/(1 + α)] × P; P′PCl5 = [(1 − α)/(1 + α)] × P. KP = P′PCl3 × P′Cl2/P′PCl5 = [αP/(1 + α)][αP/(1 + α)]/([(1 − α)/(1 + α)] × P) = α2P/(1 − α2). Rearranging, KP(1 − α2) = α2P gives α2(P + KP) = KP, so α = √(KP/(P + KP)). Hence proved.
Teacher's Note: Express each partial pressure with total moles 1 + α, form KP = α²P/(1−α²), then solve for α.
Exam Note: Write mole fractions with denominator 1 + α.
Question 47. How much PCl5 must be added to a one litre vessel at 250°C in order to obtain a concentration of 0.1 mole of Cl2? KC for PCl5 ⇌ PCl3 + Cl2 is 0.0414 mol/litre.
Solution. PCl5 ⇌ PCl3 + Cl2. Initial mole a, 0, 0; mole at equilibrium (a − 0.1), 0.1, 0.1. KC = (0.1/1 × 0.1/1)/((a − 0.1)/1) (volume is 1 litre), or 0.0414 = 0.01/(a − 0.1). Therefore a = 0.3415 mol.
Teacher's Note: Cl2 = 0.1 M means 0.1 mol PCl5 dissociated; add that to what remains, a − 0.1.
Exam Note: Initial PCl5 = remaining + dissociated.
Question 48. At 540 K, 0.10 mole of PCl5 are heated in a 8 litre flask. The pressure of the equilibrium mixture is found to be 1.0 atm. Calculate KP and KC for the reaction. (Roorkee 1998)
Solution. PCl5 ⇌ PCl3 + Cl2. Mole before dissociation 0.1, 0, 0; after dissociation (0.1 − x), x, x. Volume of container = 8 litre. KC = [PCl3][Cl2]/[PCl5] = (x/8)(x/8)/((0.1 − x)/8) = x2/(8(0.1 − x)) ...(1). Also PV = nRT for the equilibrium mixture at 540 K: 1 × 8 = (0.1 + x) × 0.082 × 540, so x = 0.08 ...(2). From Eqs. (1) and (2): KC = (0.08 × 0.08)/(8(0.1 − 0.08)) = 4 × 10-2 mol litre-1. Also KP = KC(RT)Δn; Δn = +1: = 4 × 10-2 (0.082 × 540) = 1.77 atm.
Teacher's Note: Total pressure and volume give total moles (0.1 + x) through PV = nRT, which yields x.
Exam Note: Find x from PV = nRT, then KC, then KP.
Question 49. At some temperature and under a pressure of 4 atm, PCl5 is 10% dissociated. Calculate the pressure at which PCl5 will be 20% dissociated, temperature remaining same. (Roorkee 1996)
Solution. PCl5 ⇌ PCl3 + Cl2. Mole before dissociation 1, 0, 0; after dissociation 1 − α, α, α. Given α = 0.1 at 4 atm pressure. KP = [nPCl3 × nCl2/nPCl5] × [P/Σn]Δn = α·α/(1 − α) × [P/(1 + α)] = Pα2/(1 − α2) = 4 × (0.1)2/(1 − (0.1)2), KP = 0.040 atm. Again when α is desired at 0.2, KP remains constant, so KP = Pα2/(1 − α2): 0.040 = P × (0.2)2/(1 − (0.2)2), hence P = 0.96 atm.
Teacher's Note: KP depends only on temperature; doubling α needs roughly one quarter the pressure.
Exam Note: KP constant at constant T; reuse α²P/(1−α²).
Question 50. The degree of dissociation of 0.4 at 400 K and 1.0 atm for the gaseous reaction PCl5 ⇌ PCl3 + Cl2. Assuming ideal behaviour of all the gases, calculate the density of equilibrium mixture at 400 K and 1.0 atmosphere. (Atomic mass of P = 31.0 and Cl = 35.5)
Solution. PCl5 ⇌ PCl3 + Cl2. Initial mole 1, 0, 0; at equilibrium (1 − 0.4), 0.4, 0.4. Total mole at equilibrium = 1 − 0.4 + 0.4 + 0.4 = 1.4. Normal mPCl5/observed mPCl5 = 1 + α = 1.4, so observed m = 208.5/1.4. From PV = (w/m)RT at equilibrium: w/V = Pm/RT = (1 × 208.5)/(1.4 × 0.0821 × 400) = 4.53 g/litre.
Teacher's Note: Mean molar mass falls to 208.5/1.4 because moles rise to 1.4; density = PM/RT.
Exam Note: Use apparent molar mass in d = PM/RT.
Question 51. The equilibrium concentration of the reactants and products for the given equilibrium are shown below in a two litre container: PCl3(g) + Cl2(g) ⇌ PCl5(g); 2 M, 1 M, 4 M. (i) If 2 mole of Cl2 are added in the container, find the new equilibrium concentration of each. (ii) If the equilibrium mixture reported initially is transferred into 4 litre vessel, what would be the new concentrations at equilibrium?
Solution. (i) Initially: PCl3 2 M, Cl2 1 M, PCl5 4 M. KC = [PCl5]/([PCl3][Cl2]) = 4/(2 × 1) = 2. Now 2 mole of Cl2 in 2 litre container are added, i.e. [Cl2] is increased by 1 M, which will direct the reaction forward. PCl3: 2 → (2 − a); Cl2: (1 + 1) → (2 − a); PCl5: 4 → (4 + a). KC = (4 + a)/(2 − a)2 = 2, so a = 0.5. Thus new concentrations at equilibrium are [PCl3] = 1.5 M; [Cl2] = 1.5 M; [PCl5] = 4.5 M. (ii) If the initial equilibrium mixture is transferred in 4 litre vessel: concentrations in 2 litre vessel 2, 1, 4; in 4 litre vessel 2/2 = 1, 1/2, 4/2 = 2 (initial volume is doubled). This will cause a decrease in pressure, and thus equilibrium will shift in the backward direction: new equilibrium conc. PCl3 (1 + x), Cl2 (1/2 + x), PCl5 (2 − x). KC = 2 = (2 − x)/((1 + x)(1/2 + x)), or 2(1/2 + x2 + (3/2)x) = 2 − x, or 2x2 + 4x − 1 = 0, x = [−4 ± √(16 − 4 × 2 × (−1))]/(2 × 2), x = 0.225 M. [PCl5] = 2 − 0.225 = 1.775 M; [Cl2] = 0.5 + 0.225 = 0.725 M; [PCl3] = 1 + 0.225 = 1.225 M.
Teacher's Note: Adding Cl2 shifts forward; doubling the volume halves all concentrations and shifts backward (more moles).
Exam Note: Note 2 mol in 2 L adds 1 M, not 2 M.
Question 52. At 473 K, partially dissociated vapours of PCl5 are 62 times as heavy as H2. Calculate degree of dissociation of PCl5.
Solution. PCl5 ⇌ PCl3 + Cl2. Mole before dissociation 1, 0, 0; after dissociation 1 − α, α, α. Since 1/(normal molar mass) ∝ particles before dissociation and 1/(exp. molar mass) ∝ particles after dissociation, normal molar mass/exp. molar mass = particles after/particles before = 1 + α. Exp. molar mass = 62 × molar mass of H2 = 62 × 2. 208.5/(62 × 2) = 1 + α, so α = 0.6815 or 68.15%.
Teacher's Note: Vapour density 62 relative to H2 gives mean molar mass 124; compare with 208.5 to find 1 + α.
Exam Note: Experimental M = 62 × 2 = 124.
Question 53. One mole of N2 and 3 mole of PCl5 are placed in 100 litre vessel heated to 227°C. The equilibrium pressure is 2.05 atm. Assuming ideal behaviour, calculate degree of dissociation of PCl5 and KP of the reaction: PCl5 ⇌ PCl3 + Cl2.
Solution. N2 + PCl5 ⇌ PCl3 + Cl2 (N2 is inert). Mole at t = 0: N2 1, PCl5 3, 0, 0. Mole at equilibrium: 1, (3 − x), x, x. Total mole present at equilibrium = 4 + x. Given total pressure at equilibrium = 2.05; PV = nRT: 2.05 × 100 = (4 + x) × 0.0821 × 500, so x = 0.9939. Degree of dissociation for PCl5 = mole dissociated/total mole = 0.9939/3 = 0.3313 or 33.13%. KP = [nPCl3 × nCl2/nPCl5] × [P/Σn]+1 = x2/(3 − x) × [2.05/(4 + x)] = (0.9939)2/(3 − 0.9939) × [2.05/(4 + 0.9939)], KP = 0.20.
Teacher's Note: Inert N2 counts in total moles (4 + x) but not in the reaction; PV = nRT gives x.
Exam Note: Include inert N2 in total moles.
Question 54. One mole of N2 is mixed with three mole of H2 in a 4 litre vessel. If 0.25% N2 is converted into NH3 by the reaction N2(g) + 3H2(g) ⇌ 2NH3(g), calculate KC. Also report KC for ½N2 + (3/2)H2 ⇌ NH3.
Solution. N2 + 3H2 ⇌ 2NH3. Mole at t = 0: 1, 3, 0. Mole at equilibrium: (1 − x), (3 − 3x), 2x. KC = (2x/V)2/([(1 − x)/V][(3 − 3x)/V]3) = 4x2V2/((1 − x)(3 − 3x)3) ...(1). Given x = 0.25/100 and V = 4 litre; by Eq. (1), KC = 1.49 × 10-5 litre2 mol-2. Now for ½N2 + (3/2)H2 ⇌ NH3: KC1 = [NH3]/([N2]1/2[H2]3/2) = √KC = 3.86 × 10-3 litre mol-1 (3.87 × 10-3 with unrounded KC).
Teacher's Note: Halving the equation takes the square root of K; V matters since Δn ≠ 0.
Exam Note: Halved equation: K becomes √K.
Question 55. NH3 is heated at 15 atm from 27°C to 347°C assuming volume constant. The new pressure becomes 50 atm at equilibrium of the reaction 2NH3 ⇌ N2 + 3H2. Calculate % of mole of NH3 actually decomposed.
Solution. 2NH3 ⇌ N2 + 3H2. Initial mole a, 0, 0; at equilibrium (a − 2x), x, 3x. Initial pressure of a mole of NH3 = 15 atm at 27°C. The pressure of a mole of NH3 = P atm at 347°C: 15/300 = P/620, so P = 31 atm. At constant volume and at 347°C mole ∝ pressure: a ∝ 31 (before equilibrium); a + 2x ∝ 50 (after equilibrium). So (a + 2x)/a = 50/31, x = (19/62)a. % of NH3 decomposed = (2x/a) × 100 = (2 × 19a)/(62 × a) × 100 = 61.3%.
Teacher's Note: Correct 15 atm for heating to 347°C first; the remaining rise to 50 atm is from extra moles.
Exam Note: Separate the temperature effect from the mole effect.
Question 56. In a mixture of N2 and H2 in the ratio of 1 : 3 at 30 atm and 300°C, the % of NH3 at equilibrium is 17.8. Calculate KP for N2 + 3H2 ⇌ 2NH3.
Solution. N2 + 3H2 ⇌ 2NH3. Mole before dissociation 1, 3, 0; at equilibrium (1 − x), (3 − 3x), 2x. Total mole at equilibrium = 4 − 2x and mole of NH3 at equilibrium = 2x. % of NH3 in mixture = 17.8: 2x/(4 − 2x) = 17.8/100, so x = 0.302. KP = [(nNH3)2/(nN2 × (nH2)3)] × (P/Σn)Δn = 4x2/((1 − x)(3 − 3x)3) × (P/(4 − 2x))-2 = 4x2(4 − 2x)2/(P2(1 − x)(3 − 3x)3). With P = 30 atm and x = 0.302: KP = 7.29 × 10-4 atm-2 (7.31 × 10-4 with unrounded x).
Teacher's Note: Mole % of NH3 gives x from 2x/(4−2x); then KP uses mole fractions times P with Δn = −2.
Exam Note: Δn = −2; unit atm-2.
Question 57. A reaction carried out by 1 mole of N2 and 3 mole of H2 shows at equilibrium, the mole fraction of NH3 as 0.012 at 500°C and 10 atm pressure. Calculate KP. Also report the pressure at which mole % of NH3 in equilibrium mixture is increased to 10.4.
Solution. N2 + 3H2 ⇌ 2NH3. Mole before reaction 1, 3, 0; at equilibrium 1 − x, (3 − 3x), 2x. Given mole fraction of NH3 = 0.012 at P = 10 atm: 2x/(4 − 2x) = 0.012, so x = 0.0237. KP = (P′NH3)2/(P′N2 × (P′H2)3) = 4x2(4 − 2x)2/((1 − x)(3 − 3x)3P2) ...(1) = 4(0.0237)2[4 − 2(0.0237)]2/([1 − 0.0237][3 − 3(0.0237)]3 × 100), KP = 1.431 × 10-5 atm-2. Let mole % of NH3 in equilibrium mixture be increased to 10.4 at pressure P: 2x/(4 − 2x) = 10.4/100, so x = 0.1884. Using Eq. (1) again: 1.431 × 10-5 = [4 × (0.1884)2][4 − 2(0.1884)]2/([1 − 0.1884][3 − 3(0.1884)]3 × P2), P = 105.41 atm (105.4 atm).
Teacher's Note: KP is fixed at 500°C; higher NH3 yield needs higher pressure because Δn = −2.
Exam Note: Same KP at same T; solve for P.
Question 58. At 450°C, the equilibrium constant KP for the reaction N2 + 3H2 ⇌ 2NH3 was found to be 1.6 × 10-5 at a pressure of 200 atm. If N2 and H2 are taken in 1 : 3 ratio, what is the % of NH3 formed at this temperature?
Solution. N2 + 3H2 ⇌ 2NH3. Mole before equilibrium 1, 3, 0; after equilibrium (1 − x), 3(1 − x), 2x. KP = (2x)2(4 − 2x)2/((1 − x)[3(1 − x)]3 × P2) = 16x2(2 − x)2/(27(1 − x)4 × P2). So 1.6 × 10-5 = 16x2(2 − x)2/(27(1 − x)4 × (200)2), giving x(2 − x)/(1 − x)2 = 200 × 10-3 × √27 = 1.039. The book printed x = 0.301, NH3 formed 0.602 mol, total 3.398 mol, 17.76%. Corrected: solving 2.039x2 − 4.078x + 1.039 = 0 gives x = 0.2997. Mole of NH3 formed = 2x = 0.599; total mole at equilibrium = 4 − 2x = 3.401; % of NH3 at equilibrium = 0.599/3.401 × 100 = 17.6% (17.63%).
Teacher's Note: Take the square root of the KP expression to avoid a quartic, then solve the resulting quadratic for x.
Exam Note: Mole % = 2x/(4 − 2x) × 100.
Question 59. Calculate KC for the reaction: 2H2(g) + S2(g) ⇌ 2H2S(g). If 1.58 mole of H2S, 1.27 mole of H2 and 2.78 × 10-6 mole of S2 are in a flask of capacity 180 litre at 750°C.
Solution. Mole at equilibrium: H2 1.27, S2 2.78 × 10-6, H2S 1.58. Volume of container = 180 litre. KC = [H2S]2/([H2]2[S2]) = (1.58/180)2/((1.27/180)2(2.78 × 10-6/180)) = (1.58)2 × 180/((1.27)2 × (2.78 × 10-6)). KC = 1.002 × 108 litre mol-1.
Teacher's Note: Δn = −1, so volume appears in KC: moles must be divided by 180 L before substituting.
Exam Note: Convert moles to concentrations with V = 180 L.
Question 60. What is the % dissociation of H2S, if 1 mole of H2S is introduced into a 1.10 litre vessel at 1000 K? KC for the reaction 2H2S(g) ⇌ 2H2(g) + S2(g) is 1 × 10-6.
Solution. 2H2S ⇌ 2H2 + S2. Mole before dissociation 1, 0, 0; after dissociation (1 − α), α, α/2, where α is degree of dissociation of H2S. Volume of container = 1.10 litre. KC = [H2]2[S2]/[H2S]2 = [α/1.1]2[α/(2 × 1.1)]/[(1 − α)/1.1]2 = 1 × 10-6. Assuming 1 − α ≈ 1 since α is small because KC ≈ 10-6: α3/(2(1.1)) = 10-6, α = 1.3 × 10-2 = 1.3%.
Teacher's Note: A tiny K means α is small, so 1 − α ≈ 1 and α comes from a cube root.
Exam Note: State the approximation 1 − α ≈ 1.
Question 61. At 90°C, the equilibrium, H2(g) + S(s) ⇌ H2S(g) was established having K = 6.8 × 10-2. If 0.20 mole of hydrogen and 1.0 mole of sulphur are heated to 90°C in one litre vessel, what will be the partial pressure of H2S at equilibrium?
Solution. H2 + S(s) ⇌ H2S. Mole before reaction 0.2, 1.0, 0; at equilibrium (0.2 − x), (1 − x), x. K = [H2S]/[H2] (solid S omitted), so 6.8 × 10-2 = x/(0.2 − x). The book rounds x to 0.013 and gets P = 0.387 atm. Corrected: solving exactly, x = 0.0136/1.068 = 0.01273 mol. PH2S = xRT/V = 0.01273 × 0.0821 × 363/1 = 0.379 atm.
Teacher's Note: Solid sulphur is left out of K; the pressure follows from P = nRT/V with T = 363 K.
Exam Note: Omit solid S; use T = 363 K.
Question 62. Calculate the percent dissociation of H2S(g), if 0.1 mole of H2S is kept in 0.4 litre vessel at 1000 K. For the reaction 2H2S(g) ⇌ 2H2(g) + S2(g) the value of KC is 1.0 × 10-6. (Roorkee 1994)
Solution. Answer (printed): 2%. Working to confirm: [H2S] initially = 0.1/0.4 = 0.25 M; KC = α3c/(2(1 − α)2) with 1 − α ≈ 1, so α3 × 0.25/2 = 10-6, α3 = 8 × 10-6, α = 0.02 = 2%.
Teacher's Note: Same as problem 60 with concentration 0.25 M; cube root of 8 × 10-6 gives 0.02.
Exam Note: Use initial concentration 0.25 M, not moles.
Question 63. KP for the reaction 2O3(g) ⇌ 3O2(g); is 1.3 × 1057 atm. How many O3 molecules are present in equilibrium in 10 million cubic metres of air at 25°C and 720 mm Hg pressure?
Solution. Volume of air = 10 × 106 m3 = 10 × 106 × 103 litre = 1010 litre. Volume of O2 = 20% air = 20 × 1010/100 = 20 × 108 litre. nO2 = PV/RT = (720/760) × (20 × 108)/(0.0821 × 298) = 7.74 × 107. KP = (nO2)3/(nO3)2 × P/Σn. Since nO2 ≫ nO3, Σn = nO2: KP = 1.3 × 1057 = (nO2)3 × 720/((nO3)2 × 760 × nO2). Therefore (nO3)2 = (nO2)2 × 720/(760 × KP) = (7.74 × 107)2 × 720/(760 × 1.3 × 1057), nO3 = 2.09 × 10-21 mol. Molecules of O3 = 2.09 × 10-21 × 6.023 × 1023 = 12.58 × 102 (about 1.26 × 103).
Teacher's Note: Air is 20% O2 by volume; since O3 is negligible, total moles ≈ moles of O2 in KP.
Exam Note: Convert 107 m³ to litres: 1 m³ = 1000 L.
Question 64. At 1000 K, the pressure of iodine gas is found to be 0.112 atm due to partial dissociation. Had there been no dissociation the pressure would have been 0.074 atm? Calculate KP for the reaction, I2(g) ⇌ 2I(g).
Solution. I2 ⇌ 2I. Initial pressure 0.074, 0; final pressure (0.074 − P), 2P, where I2 equivalent to pressure P dissociates. 0.074 − P + 2P = 0.112, or P = 0.112 − 0.074 = 0.038. KP = (P′I)2/P′I2 = (2 × 0.038)2/(0.074 − 0.038) = 0.160 atm.
Teacher's Note: The excess of observed over undissociated pressure equals the pressure of I2 that dissociated.
Exam Note: Excess pressure = P dissociated, since each I2 gives 2 I.
Question 65. When S in the form of S8 is heated at 900 K, the initial pressure of 1 atmosphere falls by 29%. This is because of conversion of some S8 to S2. Find the KP for reaction. (Roorkee 1990)
Solution. S8(g) ⇌ 4S2(g). Initial pressure 1, 0; pressure at equilibrium (1 − 0.29) = 0.71, (4 × 0.29). Pressure of S8 reduces by 0.29 atm. KP = [P′S2]4/[P′S8] = [4 × 0.29]4/0.71 = 2.55 (atm)3. Note: it would have been better if the physical state of S2 had also been reported as gaseous state.
Teacher's Note: The 29% refers to S8 converted; each S8 gives 4 S2, and Δn = +3 gives atm3.
Exam Note: Δn = 3; give unit atm3.
Question 66. For the reaction, CO(g) + 2H2(g) ⇌ CH3OH(g); H2 is introduced into a five litre flask at 327°C, containing 0.2 mole of CO(g) and a catalyst till the pressure is 4.92 atmosphere. At this point 0.1 mole of CH3OH(g) is formed. Calculate KC and KP. (IIT 1990)
Solution. CO + 2H2 ⇌ CH3OH. Initial mole 0.2, a, 0. Mole at equilibrium (0.2 − 0.1), (a − 0.2), 0.1. Total mole at equilibrium = 0.1 + a − 0.2 + 0.1 = a. Also mole (n) = PV/RT = (4.92 × 5)/(0.0821 × 600) = 0.499. So a = 0.499. [CH3OH] = 0.1/5; [CO] = (0.2 − 0.1)/5 = 0.1/5; [H2] = (0.499 − 0.20)/5 = 0.299/5. KC = [CH3OH]/([CO][H2]2) = (0.1/5)/((0.1/5)(0.299/5)2) = 279.64 litre2 mol-2. KP = KC(RT)Δn = 279.64 × (0.0821 × 600)-2 = 0.115 atm-2.
Teacher's Note: Total moles at equilibrium come from PV = nRT and equal a, which gives the H2 originally added.
Exam Note: T = 600 K; Δn = −2.
Question 67. 0.15 mole of CO taken in a 2.5 litre flask is maintained at 750 K alongwith a catalyst so that the following reaction can take place. CO(g) + 2H2(g) ⇌ CH3OH(g). Hydrogen is introduced until the total pressure of the system is 8.5 atm at equilibrium and 0.08 mole of methanol is formed. Calculate: (i) KP and KC (ii) The final pressure, if the same mole of CO and H2 as before are used but without catalyst so that the reaction does not take place. (IIT 1993)
Solution. (i) CO + 2H2 ⇌ CH3OH. Mole before reaction 0.15, a, 0; after reaction (0.15 − x), (a − 2x), x, with x = 0.08. Total mole at equilibrium = 0.15 − x + a − 2x + x = 0.15 + a − 2x = 0.15 + a − 0.16 = a − 0.01. Also total mole at equilibrium n = PV/RT = (8.5 × 2.5)/(0.0821 × 750) = 0.345 (P = 8.5 atm, V = 2.5 lit., T = 750 K). So a − 0.01 = 0.345, a = 0.355. At equilibrium: mole of CO = 0.15 − 0.08 = 0.07; mole of H2 = 0.355 − 0.16 = 0.195; mole of CH3OH = 0.08. KC = [CH3OH]/([H2]2[CO]) = (0.08/2.5)/((0.07/2.5)(0.195/2.5)2) = 187.85 mol-2 litre2. KP = KC(RT)Δn = 187.85 × (0.0821 × 750)-2 = 0.05 atm-2. (ii) If the reaction does not take place: mole of CO = 0.15, mole of H2 = 0.355; total mole = 0.505. P × 2.5 = 0.505 × 0.0821 × 750, P = 12.438 atm.
Teacher's Note: PV = nRT gives total moles and hence H2 added; without reaction, pressure stays higher.
Exam Note: Reaction lowers moles; no reaction gives higher pressure.
Question 68. The value of KP is 1 × 10-3 atm-1 at 25°C for the reaction: 2NO(g) + Cl2(g) ⇌ 2NOCl(g). A flask contains NO at 0.02 atm and at 25°C. Calculate the mol of Cl2 that must be added, if 1% of the NO is to be converted to NOCl at equilibrium. The volume of the flask is such that 0.2 mol of gas produce 1 atm pressure at 25°C. (Ignore probable association of NO to N2O2) (Roorkee 2001)
Solution. 2NO + Cl2 ⇌ 2NOCl. Pressure at t = 0: NO 0.02 atm. Pressure at equilibrium: NO = 0.02 × 99/100, Cl2 = P, NOCl = 0.02 × 1/100. KP = (PNOCl)2/((PNO)2PCl2) = (0.02 × 0.01)2/((0.99 × 0.02)2 × P) = 1 × 10-3, so P = 0.102 atm. For Cl2 in the vessel, PV = nRT: 0.102 × V = n × R × T ...(i). For a gas in the vessel: 1 × V = 0.2 × R × T ...(ii). By Eqs. (i) and (ii), mole of Cl2 at equilibrium = 0.0204. 2 atm of NO reacts with 1 atm of Cl2 (if V, T are constant): 0.02 × 1/100 atm NO reacts with (0.02 × 1)/(2 × 100) = 0.0001 atm Cl2. Thus 0.0001 × V = nCl2 used × RT ...(iii). By Eqs. (ii) and (iii), nCl2 which has reacted = 2 × 10-5 mol. Total Cl2 added = 0.0204 + 2 × 10-5 = 0.02042 mol.
Teacher's Note: Added Cl2 is Cl2 left at equilibrium plus Cl2 consumed; 0.2 mol per atm converts pressure to moles.
Exam Note: Add equilibrium Cl2 and Cl2 consumed.
Question 69. A graph plotted between log10 KC and 1/T is straight line with intercept 10 and slope equal to 0.5. Calculate: (i) pre-exponential factor A. (ii) heat of reaction at 298 K. (iii) equilibrium constant at 298 K. (iv) equilibrium constant at 800 K assuming ΔH remains constant in between 298 K and 800 K.
Solution. van't Hoff isochore: log10 K = log10 A − ΔH/(2.303RT). (i) Intercept = log10 A = 10, so A = 1010. (ii) Slope = tan θ = 0.5 = −ΔH/(2.303R), so ΔH = −2.303 cal mol-1 (R = 2 cal). (iii) log10 K = 10 + 2.303/(2.303 × 2 × 298), so K = 1.004 × 1010. (iv) log10 K = 10 + 2.303/(2.303 × 2 × 800), so K = 1.001 × 1010.
Teacher's Note: Intercept gives log A and slope gives −ΔH/2.303R; the same line then gives K at any T.
Exam Note: Slope = −ΔH/2.303R; intercept = log A.
Question 70. KP for the reaction, N2 + 3H2 ⇌ 2NH3 is 1.6 × 10-4 atm-2 at 400°C. What will be KP at 500°C? Heat of reaction in this temperature range is −25.14 kcal.
Solution. van't Hoff equation: 2.303 log10(KP2/KP1) = ΔH(T2 − T1)/(R × T1T2). KP1 = 1.6 × 10-4, T1 = 673 K, T2 = 773 K, ΔH = −25.14 × 103 cal. 2.303 log10(KP2/1.6 × 10-4) = (−25.14 × 103/2)[(773 − 673)/(773 × 673)]. The book printed KP2 = 1.462 × 10-5 atm-2. Corrected: the right side is −2.416, so log10(KP2/KP1) = −1.049 and KP2 = 1.43 × 10-5 atm-2.
Teacher's Note: Exothermic reaction: K falls on heating; substitute T in kelvin (673 K, 773 K) in van't Hoff's equation.
Exam Note: Convert °C to K; K must decrease.
Question 71. KC for (3/2)H2 + (1/2)N2 ⇌ NH3 are 0.0266 and 0.0129 atm-1 respectively at 350°C and 400°C. Calculate heat of formation of NH3.
Solution. 2.303 log10(KP2/KP1) = (ΔH/R)[(T2 − T1)/(T1T2)]. 2.303 log10(0.0129/0.0266) = (ΔH/2)[(673 − 623)/(673 × 623)]. Hence ΔH = −12140 cal = −12.140 kcal.
Teacher's Note: K falls with T, so formation is exothermic; use T1 = 623 K and T2 = 673 K.
Exam Note: Negative ΔH because K decreases on heating.
Question 72. Equilibrium constant KP for 2H2S(g) ⇌ 2H2(g) + S2(g) is 0.0118 atm at 1065°C and heat of dissociation is 42.4 kcal. Find equilibrium constant at 1132°C.
Solution. 2.303 log10(KP2/KP1) = (ΔH/R)[(T2 − T1)/(T1T2)] = (42.4 × 103/2)[(1405 − 1338)/(1405 × 1338)]. So KP2/KP1 = 2.129 and KP2 = 2.129 × 0.0118 = 0.025 atm.
Teacher's Note: Endothermic dissociation: K rises with temperature; T1 = 1338 K, T2 = 1405 K.
Exam Note: Endothermic: K increases; use kelvin.
Question 73. KP for the reaction, N2 + 3H2 ⇌ 2NH3 at 400°C is 1.64 × 10-4. Find KC. Also find ΔG° using KP and KC values and interpret the difference.
Solution. Δn = Σn products − Σn reactants = 2 − 4 = −2. KP = KC(RT)Δn: 1.64 × 10-4 = KC(0.0821 × 673)-2, so KC = 0.5006 mol2 litre-2. Now ΔG° = −2.303RT log10 K. If K = KP: ΔG° = −2.303 × 2 × 673 log10(1.64 × 10-4) = +11.733 kcal. If K = KC: ΔG° = −2.303 × 2 × 673 log10(0.5006) = +931 cal. Here ΔG° is the Gibbs energy change when all the reactants and products are in the standard state. For ΔG° = −2.303RT log10 KP, standard state means the partial pressure of each as 1 atm. When ΔG° = −2.303RT log10 KC, standard state means that concentration of each is 1 mol litre-1. So the values are different.
Teacher's Note: KP and KC refer to different standard states (1 atm versus 1 mol/L), so ΔG° differs.
Exam Note: ΔG° depends on the standard state chosen.
Question 74. Calculate the value of log KP for the reactions, N2(g) + 3H2(g) ⇌ 2NH3(g) at 25°C. The standard enthalpy of formation of NH3(g) is −46 kJ and standard entropies of N2(g), H2(g) and NH3(g) are 191, 130 and 192 JK-1 mol-1 respectively. (R = 8.3 JK-1mol-1) (Roorkee 1999)
Solution. −ΔG° = 2.303RT log10 KP ...(1). ΔG° = ΔH° − TΔS° (given ΔH° for NH3 = −46 kJ). ΔS°reaction = 2 × S°NH3 − S°N2 − 3 × S°H2 = 2 × 192 − 191 − 3 × 130 = −197 J. T = 273 + 25 = 298 K. ΔG° = −92 × 103 − 298 × (−197) = −92000 + 58706 (ΔH° for reaction = −46 × 2 kJ), so ΔG° = −33294 J. From Eq. (1): +33294 = 2.303 × 298 × 8.3 log10 KP, so log10 KP = 5.845.
Teacher's Note: ΔH° and ΔS° must be doubled for 2 mol NH3; then ΔG° = ΔH° − TΔS° gives log K.
Exam Note: Use 2 mol NH3; convert kJ to J.
Question 75. ΔG° for ½N2 + (3/2)H2 ⇌ NH3 is −16.5 kJ mol-1. Find out KP for the reaction. Also report KP and ΔG° for N2 + 3H2 ⇌ 2NH3 at 25°C.
Solution. −ΔG° = 2.303RT log10 KP: −(−16.5 × 103) = 2.303 × 8.314 × 298 log10 KP, so log10 KP = 16500/(2.303 × 8.314 × 298) and KP = 779.41 atm-1. Also KP1 for N2 + 3H2 ⇌ 2NH3 = (KP)2 = (779.41)2 = 6.07 × 105 atm-2. Also −ΔG°1 = 2.303 × 8.314 × 298 log10(6.07 × 105) J = 32.998 kJ, so ΔG°1 = −32.998 kJ.
Teacher's Note: Doubling the equation squares K and doubles ΔG° (−33 kJ); ΔG° = −2.303RT log K links them.
Exam Note: Doubling equation: square K, double ΔG°.
Question 76. The plot of log10 KP against 1/T for the reaction SO2(g) + ½O2(g) ⇌ SO3(g) is a straight line with slope = 4.95 × 103. Calculate KP at 25°C if standard entropies for SO2(g), O2(g) and SO3(g) are 248.2, 205.1 and 256.8 JK-1 mol-1 at 25°C respectively.
Solution. d ln KP = ΔH°/(RT2) dT. On integration ln KP = −ΔH/RT + C, or log10 KP = −ΔH°/(2.303RT) + C. Thus slope = −ΔH°/(2.303R) = 4.95 × 103, so ΔH° = −2.303 × 8.314 × 4.95 × 103 = −9.48 × 104 J. Also ΔS° = S°SO3 − S°SO2 − ½ × S°O2 = 256.8 − 248.2 − ½ × 205.1 = −93.95 JK-1 mol-1. ΔG° = ΔH° − TΔS° = −9.48 × 104 − 298 × (−93.95) = −6.68 × 104 J. Now ΔG° = −2.303RT log KP: −6.68 × 104 = −2.303 × 8.314 × 298 log KP, so KP = 5.1 × 1011.
Teacher's Note: The slope of log K versus 1/T gives ΔH°; ΔS° from tables gives ΔG° at 298 K, hence K.
Exam Note: Slope = −ΔH°/2.303R; then ΔG° = ΔH° − TΔS°.
Question 77. Show that 2.303 log10 K = −ΔH°/RT + ΔS°/R; where K is equilibrium constant and ΔH° and ΔS° are standard enthalpy and standard entropy change at temperature T.
Solution. −ΔG° = 2.303RT log10 K, also ΔG° = ΔH° − TΔS°. Thus −(ΔH° − TΔS°) = 2.303RT log10 K, or 2.303 log10 K = −ΔH°/RT + ΔS°/R.
Teacher's Note: Combine ΔG° = −2.303RT log K with ΔG° = ΔH° − TΔS° and divide by RT.
Exam Note: Equate the two ΔG° expressions, then divide by RT.
Question 78. The heat enthalpy and standard free energy change for the equilibrium: Zn(s) + H2O(g) ⇌ ZnO(s) + H2(g) are 224 kJ mol-1 and 33 kJ mol-1 respectively at the temperature 920 K. Calculate the temperature at which equilibrium constant becomes greater than 1. Assume ΔG° and ΔH remains constant.
Solution. ΔG° = −2.303RT log K: 33 = −2.303 × 8.314 × 10-3 × 920 log K, so K at 920 K = 1.34 × 10-2. Using 2.303 log(K2/K1) = (ΔH/R)[(T2 − T1)/(T1T2)], with K1 = 1.34 × 10-2, K2 = 1, T1 = 920 K: 2.303 log(1/(1.34 × 10-2)) = (ΔH/R)[(T2 − 920)/(T2 × 920)], giving T2 = 1078.5 K. Thus, at any temperature above this temperature K will be greater than 1.
Teacher's Note: Endothermic: K rises with T; use van't Hoff from K at 920 K to find where K = 1.
Exam Note: Endothermic: K > 1 above this temperature.
Question 79. Calculate the composition of A and B in an equilibrium mixture following the reaction A ⇌ B (100 mole of equilibrium mixture is present at 300 K). Data: ΔH° (in kJ): A 24.27, B 25.44; ΔS° (in J): A 246.4, B 253.3.
Solution. ΔG° = ΔH° − TΔS° and G° = H° − TS. ΔG° = ΔG°B − ΔG°A = [25.44 × 103 − (300 × 253.3)] − [24.27 × 103 − (300 × 246.4)] = −50550 + 49650 = −900 J. ΔG° = −2.303RT log KP: −900 = −2.303 × 300 × 8.314 log KP, so KP = 1.434. Also KP = [B]/[A] = 1.434. Therefore [B] = 1.434 and total of [A] and [B] = 1 + 1.434 = 2.434. Mole % of B in mixture = 1.434/2.434 × 100 = 58.92; mole % of A in mixture = 41.08 (with 100 mole mixture: 58.92 mol B and 41.08 mol A).
Teacher's Note: Compute ΔG° from the enthalpy and entropy data at 300 K; K = [B]/[A] sets the composition.
Exam Note: Δn = 0, so KP equals the mole ratio.
Question 80. When 1-pentyne (A) is treated with 4N alcoholic KOH at 175°C, it is converted slowly into an equilibrium mixture of 1.3% 1-pentyne (A), 95.2% 2-pentyne (B) and 3.5% 1,2-pentadiene (C). The equilibrium was maintained at 175°C. Calculate ΔG° for the following equilibria: B = A, ΔG°1 = ?; B = C, ΔG°2 = ?. From the calculated value of ΔG°1 and ΔG°2 indicate the order of stability of (A), (B) and (C). Write a reasonable reaction mechanism showing all intermediates leading to (A), (B) and (C).
Solution. Pentyne-1 (A) ⇌ Pentyne-2 (B) + Pentadiene-1,2 (C) (alc. KOH); at equilibrium 1.3, 95.2, 3.5. The book writes Keq = [B][C]/[A] = (95.2 × 3.5)/1.3 = 256.31 ...(i). For B ⇌ A, K1 = [A]/[B] ...(ii). Then K1 = [C]/Keq = 3.5/256.31 = 0.013. T = 175 + 273 = 448 K. ΔG° = −2.303RT log10 K = −2.303 × 8.314 × 448 log 0.013 = 16178 J = 16.178 kJ. Stability order for A and B: B > A. Similarly for B ⇌ C: K2 = [C]/[B] = Keq[A]/[B]2 = (256.31 × 1.3)/(95.2 × 95.2) = 0.037. ΔG° = −2.303 × 8.314 × 448 log 0.037 = 12282 J = 12.282 kJ. Thus, stability order for B and C is B > C. The total stability order is B > C > A. Corrected note: with unrounded K1 = 1.3/95.2 = 0.01366 and K2 = 3.5/95.2 = 0.03676, ΔG°1 ≈ +15.99 kJ and ΔG°2 ≈ +12.31 kJ; the stability order is unchanged. Mechanism as printed: CH3CH2CH2C≡CH (1-pentyne) with alc. KOH → [CH3CH2CH=C=CH2] (1,2-pentadiene, via removal of a propargylic proton and reprotonation) → [CH3CH2C≡C–CH3] (2-pentyne, by the same base-catalysed proton shift on the allene).
Teacher's Note: Both ΔG° values come from K = ratio of equilibrium amounts; positive values mean 2-pentyne is most stable.
Exam Note: Use T = 448 K; positive ΔG° means disfavoured.
Question 81. For the equilibrium N2O4 ⇌ 2NO2 (G°N2O4)298K = 100 kJ mol-1 and (G°NO2)298 = 50 kJ mol-1. (i) When 5 mole/litre of each is taken, the value of ΔG for the reaction at 298 K. (ii) Find the direction of reaction and concentration at equilibrium. (IIT 2004)
Solution. (i) ΔG° for reaction = 2 × G°NO2 − G°N2O4 = 2 × 50 − 100 = 0. Concentration at t = 0: 5 and 5. ΔG = ΔG° + 2.303RT log Q = 0 + 2.303 × 8.314 × 10-3 × 298 log(52/5) = +3.99 kJ. (ii) Since ΔG is +ve, the reaction will not proceed in forward direction. For the reverse reaction 2NO2 ⇌ N2O4: mole at t = 0: 5, 5; mole at eq.: (5 − 2x), (5 + x). ΔG° = −2.303RT log KC; ΔG° = 0, so KC = 1 or 1 = (5 + x)/(5 − 2x)2, so x = 1.25. Thus [NO2] at eq. = 5 − 2.5 = 2.5 M; [N2O4] at eq. = 5 + 1.25 = 6.25 M.
Teacher's Note: ΔG° = 0 means K = 1; Q = 5 exceeds 1, so the system moves backward.
Exam Note: Compare Q with K = 1 to fix direction.
Question 82. Consider the reaction A ⇌ B. The ΔH0f for A and B are −24.27 and −25.44 kJ/mol respectively. S° for A and B are 246.4 and 252.3 JK-1 mol-1 respectively. What is the composition of equilibrium mixture at 298 K?
Solution. ΔG° = ΔH° − TΔS° ...(1). ΔH° for reaction = ΔH°B − ΔH°A = −25.44 − (−24.27) = −1.17 kJ (the book's printed line omits the minus sign on 25.44, but its result −1.17 kJ is the same). ΔS° for reaction = S°B − S°A = 252.3 − 246.4 = 5.9 J = 5.9 × 10-3 kJ. ΔG°reaction = −1.17 − (298 × 5.9 × 10-3) = −1.17 − 1.76 = −2.93 kJ. At equilibrium: ΔG° = −2.303RT log KC: −2.93 = −2.303 × 8.314 × 10-3 × 298 log KC, so KC = 3.26. Thus [B]/[A] = KC = 3.26, i.e. the mixture contains [B] and [A] in the ratio 3.26 : 1.
Teacher's Note: ΔG° from ΔH° and ΔS° gives K; for A ⇌ B the equilibrium mole ratio B : A equals K.
Exam Note: Keep kJ and J consistent when computing TΔS°.
Question 83. The density of an equilibrium mixture of N2O4 and NO2 at 1 atm is 3.62 g/litre at 288 K and 1.84 g/litre at 348 K. Calculate the enthalpy of reaction N2O4 ⇌ 2NO2. Also calculate the entropy change during the reaction at 348 K.
Solution. Case I (288 K): PV = (w/m)RT, so mmix = (w/V)RT/P = dRT/P = 3.62 × 0.0821 × 288 = 85.6 (w/V = g/litre). Let a mole of N2O4 and (1 − a) mole of NO2 exist at equilibrium: a × 92 + (1 − a) × 46 = 85.6, so a = 0.86. [nN2O4] = 0.86 mole and [nNO2] = 0.14 mole. KP = (0.14 × 0.14/0.86) × [1/1]1 = 0.0228 atm at 288 K (the book prints 0.028 here, but uses 0.0228 below, which is the correct value). Case II (348 K): mmix = 1.84 × 0.0821 × 348 = 52.57. With a′ mole N2O4 and (1 − a′) mole NO2: a′ × 92 + (1 − a′) × 46 = 52.57, so a′ = 0.14. [nN2O4] = 0.14, [nNO2] = 0.86. KP = (0.86 × 0.86/0.14) × [1/1]1 = 5.283 atm at 348 K. Now 2.303 log(KP2/KP1) = (ΔH/R)[(T2 − T1)/(T1T2)]: 2.303 log(5.283/0.0228) = (ΔH/2)[(348 − 288)/(348 × 288)], so ΔH = 18196 cal = 18.196 kcal. Also −ΔG = 2.303RT log KP, so ΔG = −2.303 × 2 × 348 × log 5.283 = −1158.7 cal. ΔS = (ΔH − ΔG)/T = (18196 + 1158.7)/348 = 55.62 cal (per K).
Teacher's Note: Density gives mean molar mass, hence composition and K at each T; van't Hoff gives ΔH.
Exam Note: Density gives molar mass d RT/P; use R = 2 cal.
Question 84. Calculate the equilibrium concentration ratio of C to A, if 2.0 mol each of A and B were allowed to come to equilibrium at 300 K for A + B ⇌ C + D. The ΔG° change is 460 cal.
Solution. A + B ⇌ C + D. At t = 0: 2, 2, 0, 0. At equilibrium: (2 − x), (2 − x), x, x. KC = [C][D]/([A][B]) = [C]2/[A]2 [since [C] = [D] and [A] = [B]]. Also ΔG° = −2.303RT log KC: 460 = −2.303 × 2 × 300 log([C]2/[A]2), so log([C]2/[A]2) = −0.3329, [C]2/[A]2 = 0.464, and [C]/[A] = 0.68.
Teacher's Note: Equal amounts of A and B (and of C and D) make K a perfect square, so ratio = √K.
Exam Note: ΔG° positive means K < 1; ratio = √K.
Question 85. ΔG° = 77.77 kJ mol-1 at 1000 K for the reaction ½N2(g) + ½O2(g) ⇌ NO(g). What is the partial pressure of NO under equilibrium at 1000 K for air at 1 atm pressure containing 80% N2 and 20% O2 by volume?
Solution. ΔG° = −2.303RT log10 KC: 77.77 × 103 = −2.303 × 8.314 × 1000 log10 KC, so KC = 8.67 × 10-5. ½N2 + ½O2 ⇌ NO: initial pressure 0.8, 0.2, 0; final pressure (0.8 − x/2), (0.2 − x/2), x. 8.67 × 10-5 = x/((0.8 − x/2)1/2(0.2 − x/2)1/2), so x = 3.47 × 10-5 atm.
Teacher's Note: Δn = 0 so KP = KC; K is tiny, so x is negligible against 0.8 and 0.2.
Exam Note: Δn = 0, KP = KC; ignore x/2 beside 0.2.
Question 86. 88 g chunk of dry ice and 30 g graphite were placed in a 5 litre container and the mixture was heated to achieve the equilibrium: CO2(g) + C(s) ⇌ 2CO(g). Calculate the value of KP at 1000 K if the density of gas mixture is 18.3 g/litre. What is the value of KP at 1100 K if density of gas mixture is 18.9 g/litre. Also calculate the enthalpy of reaction.
Solution. At 1000 K: CO2 + C(s) ⇌ 2CO. Mole at t = 0: 88/44 = 2, 30/12 = 2.5, 0. Mole at equilibrium: (2 − a), (2.5 − a), 2a. Mass of gaseous mixture = [(2 − a) × 44] + (2a × 28) = 88 − 44a + 56a = (88 + 12a) g. Density of mixture = (88 + 12a)/5 = 18.3 g/litre, so 88 + 12a = 5 × 18.3, a = 0.29. Mole at eq.: CO2 = 2 − 0.29 = 1.71; C = 2.5 − 0.29 = 1.71; CO = 2 × 0.29 = 0.58. KC = [CO]2/[CO2] = (0.58 × 0.58)/(5 × 1.71) = 3.93 × 10-2. KP = KC(RT)Δn = 3.93 × 10-2 × (0.0821 × 1000) = 3.23 atm (Δn = 2 − 1 = 1). At 1100 K: (88 + 12a′)/5 = 18.9, so a′ = 0.54. Mole at eq.: CO2 = 2 − 0.54 = 1.46; C = 2.5 − 0.54; CO = 1.08. KC = (1.08 × 1.08)/(5 × 1.46) = 0.16. KP = 0.16 × 0.0821 × 1100 = 14.43 atm. Also 2.303 log(KP2/KP1) = (ΔH/R)(T2 − T1)/(T1T2): 2.303 log(14.43/3.23) = (ΔH/2)[(1100 − 1000)/(1100 × 1000)], so ΔH = 32936 cal = 32.936 kcal.
Teacher's Note: Density fixes the gas mass (88 + 12a), giving the extent a; solid carbon is omitted from K.
Exam Note: Gas mass = 88 + 12a; leave out solid C.
Question 87. Following data are given for the reaction: H2(g) + ½S2(g) ⇌ H2S(g). T(K): 1023, 1218, 1362, 1473, 1667; log10 KP: 2.025, 1.305, 0.902, 0.643, 0.257. Assuming ΔH° and ΔS° constant for the given range, calculate ΔH° for the reaction in the range 1000 to 1218 K. Calculate ΔG° and ΔS° at 1023 K.
Solution. 2.303 log(KP2/KP1) = (ΔH°/R)[(T2 − T1)/(T1T2)], or 2.303[log KP2 − log KP1] = (ΔH°/2)[(1218 − 1023)/(1218 × 1023)]: 2.303[1.305 − 2.025] = (ΔH°/2)[195/(1218 × 1023)]. The book prints ΔH° = 21190.67 cal = 21.19 kcal, but the left side is negative (K falls with T), so Corrected: ΔH° = −21190.67 cal = −21.19 kcal (the book itself uses −21190.67 in the next line). ΔG° = −2.303RT log10 KP = −2.303 × 2 × 1023 × 2.025 = −9541.6 cal = −9.5416 kcal. Also ΔG° = ΔH° − TΔS°: −9541.6 = −21190.67 − 1023 × ΔS°. The book prints ΔS° = +11.38 cal; Corrected: 1023ΔS° = −21190.67 + 9541.6 = −11649, so ΔS° = −11.38 cal K-1 (the formation of H2S from gases lowers entropy).
Teacher's Note: A falling K with rising T means exothermic (ΔH negative); ΔS then follows from ΔG° = ΔH° − TΔS°.
Exam Note: Check signs: log K falls with T, so ΔH is negative.
Question 88. Consider the equilibrium A(g) ⇌ 2B(g) + 3C(g) at 25°C. When A is loaded into a cylinder at 10.0 atm and the system is allowed to come to an equilibrium, the final pressure is found to be 15.76 atm. What is standard Gibb's energy change for the reaction?
Solution. A ⇌ 2B + 3C. Initial pressure 10, 0, 0; final pressure (10 − P), 2P, 3P. Since 10 − P + 2P + 3P = 15.76, P = 1.44. P′A = 10 − 1.44 = 8.56 atm; P′B = 2 × 1.44 = 2.88 atm; P′C = 3 × 1.44 = 4.32 atm. KP = (4.32)3 × (2.88)2/8.56 = 78.12. ΔG° = −2.303RT log KP = −2.303 × 8.314 × 298 × log 78.12 = −10799.8 J. Corrected: this is −1.08 × 104 J = −10.8 kJ (the book prints the unit as kJ, which should be J).
Teacher's Note: Total pressure rise 10 → 15.76 atm equals 4P, giving P; ΔG° follows from KP at 298 K.
Exam Note: Result is about −10.8 kJ, not 104 kJ.
Question 89. Given below are the values of ΔH° and ΔS° for 27°C: SO2(g) + ½O2(g) → SO3(g); ΔH° = −98.32 kJ mol-1 and ΔS° = −95 JK-1 mol-1. Find KP for the reaction.
Solution. 2.303 log10 KP = −ΔH°/RT + ΔS°/R = 98320/(8.314 × 300) − 95/8.314 (put ΔH° and R in J). Therefore KP = 1.44 × 1012 atm-1/2.
Teacher's Note: Use 2.303 log K = −ΔH°/RT + ΔS°/R with both in joules; Δn = −½ gives atm-1/2.
Exam Note: Convert kJ to J; T = 300 K.
Question 90. For NH4HS(s) ⇌ NH3(g) + H2S(g), the observed pressure for reaction mixture in equilibrium is 1.12 atm at 106°C. What is the value of KP for the reaction?
Solution. Pressure at equilibrium: NH3 = P, H2S = P. Total pressure at equilibrium = 2P = 1.12 atm, so P = 1.12/2 atm. KP = P′NH3 × P′H2S = (1.12/2) × (1.12/2) = 0.3136 atm2.
Teacher's Note: The two gases form in equal amounts, so each has half the total pressure; solid omitted.
Exam Note: Each gas contributes half the total pressure.
Question 91. Some solid NH4HS is placed in flask containing 0.5 atm of NH3. What would be pressures of NH3 and H2S when equilibrium is reached? NH4HS(s) ⇌ NH3(g) + H2S(g); KP = 0.11.
Solution. Pressure before dissociation: NH3 0.5, H2S 0. Pressure after dissociation: (0.5 + P), P. Let pressure equivalent to P atm be developed by NH3 and H2S on dissociation of NH4HS, when 0.5 atm of NH3 is already present. KP = P′NH3 × P′H2S = (0.5 + P)P, or 0.11 = (0.5 + P)P, so P = 0.1653. P′NH3 = 0.5 + 0.1653 = 0.6653 atm; P′H2S = 0.1653 atm.
Teacher's Note: Extra NH3 is a common-ion-type effect: H2S pressure falls below its value in the pure system.
Exam Note: Add the pre-existing 0.5 atm to NH3.
Question 92. The equilibrium pressure of NH4CN(s) ⇌ NH3(g) + HCN(g) is 0.298 atm. Calculate KP. If NH4CN(s) is allowed to decompose in presence of NH3 at 0.25 atm, calculate partial pressure of HCN at equilibrium.
Solution. Partial pressure at equilibrium: NH3 = P, HCN = P. Total pressure at equilibrium = 2P = 0.298 atm, so P = 0.149 atm. KP = P′NH3 × P′HCN = 0.149 × 0.149 = 0.0222 atm2. Now dissociation is made when PNH3 = 0.25 atm: initial pressure 0.25, 0; pressure at equilibrium (0.25 + P′), P′. KP = P′(P′ + 0.25), 0.0222 = (P′)2 + 0.25P′, so P′ = 0.0694 atm (0.0695 atm unrounded), the partial pressure of HCN.
Teacher's Note: Pre-existing NH3 suppresses dissociation, so HCN pressure drops from 0.149 to about 0.07 atm.
Exam Note: Solve the quadratic and take the positive root.
Question 93. When 3.06 g of solid NH4HS is introduced into a two-litre evacuated flask at 27°C, 30% of the solid decomposes into gaseous ammonia and hydrogen sulphide. (i) Calculate KC and KP for the reaction at 27°C. (ii) What would happen to the equilibrium when more solid NH4HS is introduced into the flask? (IIT 1999)
Solution. NH4HS(s) ⇌ NH3(g) + H2S(g). Initial mole 3.06/51 (= 0.06). Mole at eq.: (3.06/51) × (70/100) of solid; NH3 = (3.06/51) × (30/100); H2S = (3.06/51) × (30/100). Given V = 2 litre; T = 27°C; Δn = 2 − 0 = 2. KC = [NH3][H2S] = [3.06 × 30/(51 × 100 × 2)]2 = 8.1 × 10-5 mol2 litre-2. KP = KC(RT)Δn = 8.1 × 10-5 × (0.082 × 300)2 = 4.90 × 10-2 atm2. Addition of more NH4HS on this equilibrium will cause no effect because the concentration of NH4HS is not involved in the formulae of KP or KC.
Teacher's Note: Each gas is 0.018 mol in 2 L, so 0.009 M; adding more pure solid does not shift the equilibrium.
Exam Note: Pure solids do not appear in K; no shift.
Question 94. Ammonium carbonate dissociates as NH2COONH4(s) ⇌ 2NH3(g) + CO2(g). In a closed vessel containing ammonium carbamate in equilibrium, ammonia is added such that partial pressure of NH3 now equals to the original total pressure. Calculate the ratio of total pressure now to the original pressure.
Solution. Let pressure at equilibrium of CO2 be P, then PNH3 = 2P and total pressure at equilibrium = 3P. KP = (2P)2 × P = 4P3 ...(1). If NH3 is added and the pressure of NH3 after addition at equilibrium is 3P, i.e., equal to initial total pressure: KP = 4P3 = (P′NH3)2 × P′CO2 = (3P)2 × P′CO2, so P′CO2 = (4/9)P. Thus, total pressure in II equilibrium = 3P + (4/9)P = (31/9)P. Total pressure in II equilibrium/total pressure in I equilibrium = (31P/9)/(3P) = 31/27.
Teacher's Note: KP = 4P³ is fixed; raising NH3 to 3P forces CO2 down to 4P/9.
Exam Note: Keep KP fixed; solve for new PCO2.
Question 95. What concentration of CO2 be in equilibrium with 2.5 × 10-2 mol litre-1 of CO at 100°C for the reaction FeO(s) + CO(g) ⇌ Fe(s) + CO2(g); KC = 5.0.
Solution. KC = [CO2]/[CO], so 5 = [CO2]/(2.5 × 10-2). [CO2] at equilibrium = 2.5 × 10-2 × 5 = 12.5 × 10-2 mol litre-1.
Teacher's Note: Solids FeO and Fe are omitted, so KC is just the ratio [CO2]/[CO].
Exam Note: Leave out solids FeO and Fe.
Question 96. In the reaction, C(s) + CO2(g) ⇌ 2CO(g), the equilibrium pressure is 12 atm. If 50% of CO2 reacts, calculate KP.
Solution. Gaseous mole before dissociation: CO2 1, CO 0. Gaseous mole after dissociation: CO2 (1 − 50/100) = 0.5, CO 2 × 50/100 = 1. Total mole = 1.5 and Δn = 1. Total pressure at equilibrium = 12 atm. KP = (nCO)2/(nCO2) × [P/Σn]Δn = (1)2/0.5 × (12/1.5)1 = 12/(1.5 × 0.5) = 16 atm.
Teacher's Note: Solid carbon is omitted; 50% conversion of CO2 gives 0.5 mol CO2 and 1 mol CO, total 1.5 mol.
Exam Note: Count only gaseous moles in Σn.
Question 97. The amount of CO2 in a gaseous mixture of CO2 and CO is determined by passing the gas through an aqueous solution that contains excess of Ba(OH)2. The CO2 reacts yielding a precipitate of BaCO3 but CO does not react. This method is used to analyse the equilibrium composition of gas when 1.77 g CO2 reacted with 2.0 g graphite in a 1.0 litre container at 1100 K. The analysis yielded 3.41 g of BaCO3. Use this data to calculate KP at 1100 K for the reaction CO2(g) + C(s) ⇌ 2CO(g).
Solution. CO2 + C(s) ⇌ 2CO. Initial mole: CO2 = 1.77/44 = 0.040; C = 2/12 = 0.167; CO = 0. Mole of CO2 left = mole of BaCO3 (CO2 + Ba(OH)2 → BaCO3 + H2O) = 3.41/197 = 0.017. The book then takes CO = 0.034 and gets KC = (0.034)2/0.017 = 0.068 and KP = 6.14 atm. Corrected: CO2 reacted = 0.0402 − 0.0173 = 0.0229 mol, so CO formed = 2 × 0.0229 = 0.0458 mol (the book's 0.034 does not follow from the stoichiometry). KC = [CO]2/[CO2] = (0.0458)2/0.0173 = 0.121 mol litre-1 (V = 1 litre). KP = KC(RT)Δn = 0.121 × (0.0821 × 1100)1 = 10.96 atm (about 11 atm).
Teacher's Note: BaCO3 gives unreacted CO2; reacted CO2 is the difference from initial, and CO formed is twice that.
Exam Note: CO formed = 2 × CO2 reacted.
Question 98. A vessel at 1000 K contains CO2 with a pressure of 0.5 atm. Some of the CO2 is converted into CO on addition of graphite. Calculate the value of K, if total pressure at equilibrium is 0.8 atm. (Roorkee 1993)
Solution. CO2(g) + C(s) ⇌ 2CO(g). Initial pressure 0.5, 0. Final pressure (0.5 − P), 2P. So 0.5 − P + 2P = 0.8, P = 0.3 atm. Final partial pressures at equilibrium: P′CO2 = 0.5 − 0.3 = 0.2 atm; P′CO = 2P = 2(0.3) = 0.6 atm. KP = (P′CO)2/P′CO2 = (0.6)2/0.2 = 1.8 atm.
Teacher's Note: Total pressure rises by P (since 1 CO2 gives 2 CO), so 0.8 − 0.5 = P = 0.3 atm.
Exam Note: Rise in total pressure equals P.
Question 99. At 817°C, KP for the reaction between CO2(g) and excess hot graphite(s) is 10 atm. (a) What are the equilibrium concentration of the gases at 817°C and a total pressure of 5 atm? (b) At what total pressure, the gas contains 5% CO2 by volume? (Roorkee 2000)
Solution. (a) CO2(g) + C(s) ⇌ 2CO(g). Initial mole 1, 0. Final mole (1 − α), 2α. KP = (nCO)2/nCO2 × [P/Σn]1 = (2α)2/(1 − α) × [5/(1 + α)], so 10 = 20α2/(1 − α2), or 10 − 10α2 = 2α2·… giving α2 = 10/30 and α = √(1/3) = 0.577. Mole of CO2 at equilibrium = 1 − α = 0.423; mole of CO = 2α = 1.154; total mole = 1.577. PV = nRT with P = 5 atm, n = 1.577, T = 817 + 273 = 1090 K: 5 × V = 1.577 × 0.0821 × 1090, V = 28.22 litre. [CO] at equilibrium = 1.154/28.22 = 0.041 mol litre-1; [CO2] at equilibrium = 0.423/28.22 = 0.015 mol litre-1. (b) The book sets (1 − a)/(1 + a) = 5/100 and then substitutes the CO amount as 2 × 95/100, obtaining P = 0.145 atm. Corrected: 5% CO2 by volume means mole fractions 0.05 (CO2) and 0.95 (CO), so KP = (0.95P)2/(0.05P) = 18.05P = 10, giving P = 0.554 atm.
Teacher's Note: Part (a) finds α from K and total pressure; part (b) uses mole fractions 0.05 and 0.95 directly.
Exam Note: For % by volume, use mole fractions times P.
Question 100. The equilibrium attained in a closed container is H2O(l) ⇌ H2O(v) at 40°C. The aqueous tension of water in container at 40°C is 23 mm. What is its KP?
Solution. KP = (PH2O) = 23 mm.
Teacher's Note: Only the vapour appears in KP; the aqueous tension is the equilibrium vapour pressure itself.
Exam Note: KP equals the vapour pressure of water.
Question 101. When 20 g of CaCO3 were put into 10 litre flask and heated to 800°C, 35% of CaCO3 remained unreacted at equilibrium. Calculate KP for decomposition of CaCO3.
Solution. CaCO3(s) ⇌ CaO(s) + CO2(g). Mole before dissociation: 20/100 (= 0.2). Mole after dissociation: CaCO3 [20/100 × 35/100]; CaO [20/100 × 65/100]; CO2 [20/100 × 65/100]. Mole of CO2 formed = 20 × 65/104 = 1.3 × 10-1. PV = nRT: PCO2 = (1.3 × 10-1/10) × 0.0821 × 1073 = 1.145 atm. Now KP = P′CO2 = 1.145 atm.
Teacher's Note: 65% of 0.2 mol decomposed gives 0.13 mol CO2 in 10 L; for solids-plus-one-gas, KP is simply PCO2.
Exam Note: KP = PCO2; T = 1073 K.
Question 102. At a certain temperature, KP for dissociation of CaCO3 is 4 × 10-2 atm and for the reaction, C(s) + CO2 ⇌ 2CO is 2.0 atm respectively. Calculate the pressure of CO at this temperature when solid C, CaO, CaCO3 are mixed and allowed to attain equilibrium.
Solution. Eq. I: CaCO3(s) ⇌ CaO(s) + CO2(g), KP = 4 × 10-2 = P′CO2. Eq. II: C(s) + CO2(g) ⇌ 2CO(g), KP = (P′CO)2/P′CO2 = 2.0. Now both are at equilibrium and thus P′CO2 = 4 × 10-2 which should remain constant, so 2.0 = (P′CO)2/(4 × 10-2) or P′CO = √(4 × 10-2 × 2) = 0.28 atm.
Teacher's Note: CaCO3 fixes PCO2 = 0.04 atm; that same CO2 pressure then fixes PCO through the second equilibrium.
Exam Note: Both equilibria share the same PCO2.
Question 103. Would 1% CO2 in air be sufficient to prevent any loss in weight when M2CO3 is heated at 120°C? M2CO3(s) ⇌ M2O(s) + CO2(g); KP = 0.0095 atm at 120°C. How low would the partial pressure of CO2 have to be to promote this reaction at 120°C?
Solution. Since CO2 is 1% in air, P′CO2 = (1/100) × Pair = (1/100) × 1 atm = 0.01 atm. Also for equilibrium KP = P′CO2 = 0.0095 atm. Given P′CO2 = 0.01 atm. Since decomposition is carried out in presence of P′CO2 of 0.01 atm and KP = 0.0095 atm, practically no decomposition of M2CO3. Thus, 1% CO2 is sufficient to prevent any loss in mass. If at all reaction is desired the P′CO2 must be lesser than 0.0095 atm, as P′CO2 at equilibrium cannot be more than 0.0095 atm. Alternate solution: KP = 1/100 + P (CO2 already present 1/100 atm; decomposition produces CO2 of pressure P), or 0.0095 = P + 0.01, P = −0.0005. The value of pressure comes negative and thus M2CO3 will not dissociate in presence of CO2 at 0.01 atm.
Teacher's Note: Decomposition proceeds only if the actual PCO2 is below KP (Q < K); 0.01 atm exceeds 0.0095 atm.
Exam Note: Compare ambient PCO2 with KP to decide.
Question 104. In the preparation of quick lime from limestone, the reaction is, CaCO3 ⇌ CaO(s) + CO2(g). Experiments carried out between 850°C and 950°C led to set of KP values fitting in empirical equation ln KP = 7.282 − 8500/T where T is absolute temperature. If the reaction is carried out in quiet air, what minimum temperature would be predicted from this equation for almost complete decomposition of lime?
Solution. ln KP = 7.282 − 8500/T. At T = 1123 K: ln KP = 7.282 − 7.569 = −0.287, KP = 0.751. At T = 1223 K: ln KP = 7.282 − 6.950 = 0.332, KP = 1.394. Quiet air means the state when the decomposition of CaCO3 occurs in a way that the air surrounding it becomes saturated with a pressure of CO2 equal to 1 atm (to push back the air) needed to attain equilibrium. Thus, when KP ≥ 1, the reaction is spontaneous in the forward direction, i.e. at 950°C the reaction occurs predominantly in the forward direction. For minimum temperature, put KP = 1 in the given equation: log KP = 7.282 − 8500/T, or log 1 = 7.282 − 8500/T, so T = 1167.26 K or 894.26°C (using the equation as printed with ln, 8500/7.282 = 1167.26 K).
Teacher's Note: Decomposition in open air needs PCO2 = KP ≥ 1 atm; setting KP = 1 gives the threshold temperature.
Exam Note: Set KP = 1 atm, then T = 8500/7.282.
Question 105. Under what pressure conditions CuSO4·5H2O be efflorescent at 25°C? How good a drying agent is CuSO4·3H2O at the same temperature? Given: CuSO4·5H2O(s) ⇌ CuSO4·3H2O(s) + 2H2O(v); KP = 1.086 × 10-4 atm2 at 25°C. Vapour pressure of water at 25°C is 23.8 mm of Hg.
Solution. An efflorescent salt is one that loses H2O to atmosphere. For the reaction CuSO4·5H2O(s) ⇌ CuSO4·3H2O(s) + 2H2O(v): KP = (P′H2O)2 = 1.086 × 10-4, so P′H2O = 1.042 × 10-2 atm = 7.92 mm. Given P′H2O at 25°C (i.e., 23.8) > 7.92 mm, the reaction will proceed in the backward direction, i.e. CuSO4·3H2O + 2H2O(v) ⇌ CuSO4·5H2O. Thus CuSO4·5H2O will not act as efflorescent but on the contrary CuSO4·3H2O will absorb moisture from the atmosphere under given conditions. The salt CuSO4·5H2O will effloresce only on a dry day when the aqueous tension or partial pressure of moisture in the air is lesser than 7.92 mm, or if relative humidity of air at 25°C = 7.92/23.8 = 0.333 or 33.3%.
Teacher's Note: Efflorescence needs ambient water-vapour pressure below the salt's equilibrium vapour pressure (7.92 mm); relative humidity must be under 33%.
Exam Note: Compare ambient vapour pressure with 7.92 mm.
Question 106. From the data given below derive which of the following reactant is most effective drying agent at 0°C. Given P°H2O = 4.58 mm at 0°C. (i) SrCl2·6H2O(s) ⇌ SrCl2·2H2O(s) + 4H2O(g); KP = 6.9 × 10-12 atm4. (ii) Na2SO4·10H2O(s) ⇌ Na2SO4(s) + 10H2O(g); KP = 4.08 × 10-25 atm10. (iii) Na2HPO4·12H2O(s) ⇌ Na2HPO4·7H2O(s) + 5H2O(g); KP = 5.25 × 10-13 atm5.
Solution. For (i) KP = (PH2O)4, so PH2O = (KP)1/4 = (6.9 × 10-12)1/4 = 1.62 × 10-3 atm. For (ii) KP = (PH2O)10, so PH2O = (4.08 × 10-25)1/10 = 3.64 × 10-3 atm. For (iii) KP = (PH2O)5, so PH2O = (5.25 × 10-13)1/5 = 3.50 × 10-3 atm. All these reactants can be used as drying agent since their PH2O is lesser than V.P. of H2O in atmosphere, i.e., 4.58 mm or 6.02 × 10-3 atm. The efficiency order is SrCl2·6H2O > Na2HPO4·12H2O > Na2SO4·10H2O.
Teacher's Note: The hydrate with the lowest equilibrium water-vapour pressure holds water most strongly, so it dries best.
Exam Note: Take the n-th root of KP and rank lowest first.
Question 107. For the reaction, SnO2(s) + 2H2(g) ⇌ Sn(l) + 2H2O(g), the equilibrium mixture of steam and hydrogen contained 45% and 24% H2 at 900 K and 1100 K respectively. Calculate KP at both the temperatures. Generally should it be higher or lower temperatures for better reduction of SnO2?
Solution. Case I: 900 K. Mixture: H2 45, H2O 55 (percent). KC1 = (55)2/(45)2 = 1.494 (Δn = 0, so KP = KC). Case II: 1100 K. Mixture: H2 24, H2O 76. KC2 = (76)2/(24)2 = 10.03. KC increases with temperature and thus the reaction should be endothermic. Thus, high temperature is preferred for reduction of SnO2.
Teacher's Note: With Δn = 0, KP is just (H2O/H2)2; K rising with T shows the reduction is endothermic.
Exam Note: K increases with T: endothermic, so high temperature.
Question 108. For the equilibrium: LiCl·3NH3(s) ⇌ LiCl·NH3(s) + 2NH3(g), KP = 9 atm2 at 40°C. A 5 litre vessel contains 0.1 mole of LiCl·NH3. How many mole of NH3 should be added to the flask at this temperature to derive the backward reaction for completion?
Solution. LiCl·3NH3 ⇌ LiCl·NH3 + 2NH3, KP = 9 atm2. Reverse: LiCl·NH3(s) + 2NH3(g) ⇌ LiCl·3NH3(s), KP = 1/9 (atm)-2. Initial mole: LiCl·NH3 0.1, NH3 a, product 0. Final mole at equilibrium: 0, (a − 0.2), 0.1. Let initial mole of NH3 be a to bring in completion of reaction. At equilibrium KP1 = 1/(P′NH3)2, or 1/9 = 1/(P′NH3)2, so P′NH3 = 3 atm. PV = nRT: 3 × 5 = n × 0.0821 × 313, n = 0.5837, i.e. (a − 0.2) = 0.5837. Initial mole of NH3 = a = 0.5837 + 0.2 = 0.7837 mol.
Teacher's Note: At completion NH3 pressure must equal 3 atm (from K = 1/P²); add the 0.2 mol consumed.
Exam Note: Add 0.2 mol consumed to equilibrium NH3; T = 313 K.
Question 109. The equilibrium: 2Na(g) ⇌ Na2(g) was attained at 1.013 M Pa and 1500 K. The mass % of Na(g) at equilibrium was found to be 71.0. Calculate KP of reaction.
Solution. 2Na(g) ⇌ Na2(g). Mass at eq.: Na 71, Na2 29. Mole at eq.: Na = 71/23 = 3.087; Na2 = 29/46 = 0.630. KP = [nNa2/(nNa)2] × [P/Σn]-1 = (0.630/(3.087)2) × [1.013/3.717]-1 = 0.242 MPa-1.
Teacher's Note: Convert mass % to moles (Na 23, Na2 46), then use K with Δn = −1 and P in MPa.
Exam Note: Δn = −1; unit is MPa-1.
Question 110. A small thermometer is broken in a closed room of dimensions 6 × 5 × 3 m3 and the mercury shows the equilibrium: Hg(l) ⇌ Hg(v) at 27°C. The atomic mass of Hg is 200.5 and vapour pressure of Hg at 27°C is 0.002 mm. Is it dangerous to enter the room if safety limit to Hg(v) is 0.05 mg/m3?
Solution. Volume of room = 6 × 5 × 3 = 90 m3 = 90 × 103 litre. Hg(l) ⇌ Hg(v): KP = P′Hg = 0.002/760 = 2.63 × 10-6 atm. nHg(v) = PV/RT = (2.63 × 10-6 × 90 × 103)/(0.0821 × 300) = 9.62 × 10-3 mol. WHg(v) = 9.62 × 10-3 × 200.5 = 1.928 g = 1.928/(90 × 103) = 2.14 × 10-5 g/litre = (2.14 × 10-5 × 103)/10-3 mg/m3 = 21.4 mg/m3. The value is higher than the safety limit (0.05 mg/m3) and thus dangerous to enter the room.
Teacher's Note: Convert vapour pressure to moles in the whole room, then to mg per m³ and compare with 0.05 mg/m³.
Exam Note: Convert mm Hg to atm and m³ to litres.
Question 111. In an experiment starting with 1 mole C2H5OH, 1 mole CH3COOH and 1 mole of water, the equilibrium mixture on analysis shows that 54.3% of the acid is esterified. Calculate KC.
Solution. C2H5OH + CH3COOH ⇌ CH3COOC2H5 + H2O. Mole before reaction: 1, 1, 0, 1. Mole at equilibrium: (1 − x), (1 − x), x, (1 + x). KC = [CH3COOC2H5][H2O]/([CH3COOH][C2H5OH]) = (x/V)((1 + x)/V)/(((1 − x)/V)((1 − x)/V)) = x(1 + x)/(1 − x)2. Given that x = 0.543 since 54.3% of acid is used up, KC = 4.012.
Teacher's Note: Initial water must be added: water at equilibrium is 1 + x; volume cancels as Δn = 0.
Exam Note: Include initial water in the expression.
Question 112. When C2H5OH and CH3COOH are mixed in equivalent proportion, equilibrium is reached when 2/3 of acid and alcohol are used. How much ester will be present when 2 g molecule of acid were to react with 2 g molecule of alcohol?
Solution. Case I: C2H5OH + CH3COOH ⇌ CH3COOC2H5 + H2O. Mole before reaction: 1, 1, 0, 0. Mole at equilibrium: 1 − x, 1 − x, x, x, with x = 2/3. So moles at equilibrium: (1 − 2/3), (1 − 2/3), 2/3, 2/3. KC = ((2/3) × (2/3))/((1/3) × (1/3)) = 4. Note: volume terms are eliminated as in problem 105. Case II: mole before reaction 2, 2, 0, 0; at equilibrium (2 − x), (2 − x), x, x. KC = 4 = x2/(2 − x)2, or x/(2 − x) = 2, x = 1.33 (mol of ester).
Teacher's Note: Get K = 4 from the first case; then x/(2−x) = √4 = 2 gives ester from 2 mol each.
Exam Note: Δn = 0, so volume cancels; take square root.
Question 113. When α-D glucose is dissolved in water, it undergoes a partial conversion to β-D glucose to exhibit mutarotation. This conversion stops when 63.6% of glucose is in β form. Assuming that the equilibrium has been attained, calculate KC for mutarotation.
Solution. α-D glucose ⇌ β-D glucose. At equilibrium: 36.4, 63.6. KC = 63.6/36.4 = 1.747.
Teacher's Note: Both forms are in the same solution, so KC is the ratio of percentages (β : α) at equilibrium.
Exam Note: Percentages can be used directly for 1 : 1 equilibria.
Question 114. Calculate KC for the reaction, KI + I2 ⇌ KI3. Given that initial mass of KI is 1.326 g. Mass of KI3 is 0.105 g and no. of mole of free I2 is 0.0025 at equilibrium and the volume of solution is one litre. The solubility of I2 in water is 0.0013 M.
Solution. KI(aq) + I2(aq) ⇌ KI3(aq). Molar mass KI = 166, molar mass KI3 = 420. Mole at t = 0: KI = 1.326/166. Mole at equilibrium: KI = (1.326/166 − 0.105/420) = 7.738 × 10-3; I2 (in solution) 0.0013; KI3 = 0.105/420 = 2.5 × 10-4. KC = [KI3]/([KI][I2]) = 2.5 × 10-4/(7.738 × 10-3 × 0.0013) (volume of solution = 1 litre). The book prints KC = 24.62; Corrected: the arithmetic gives KC = 24.85 (about 24.9 litre mol-1). The free iodine should be in solid and solution state: I2 in solution state, i.e. I2(aq) = 0.0013 M. Thus, I2 in solid state = 0.0025 − 0.0013 = 0.0012 mol.
Teacher's Note: Only dissolved I2 (limited by solubility, 0.0013 M) enters KC; the rest of the free iodine is undissolved solid.
Exam Note: Use dissolved I2 only, not total free I2.
Question 115. Sulphide ions in alkaline solution react with solid sulphur to form polyvalent sulphide ions. The equilibrium constant for the formation of S22− and S32− from S and S2− ions are 1.7 and 5.3 respectively. Calculate equilibrium constant for the formation of S32− from S22− and S.
Solution. Given S(s) + S2− ⇌ S22−, KC1 = [S22−]/[S2−] = 1.7 ...(1); 2S(s) + S2− ⇌ S32−, KC2 = [S32−]/[S2−] = 5.3 ...(2). Now for S22− + S(s) ⇌ S32−: KC = [S32−]/[S22−]. By Eqs. (2) and (1): KC2/KC1 = [S32−]/[S22−] = KC, so KC = 5.3/1.7 = 3.11 (3.12 to three significant figures).
Teacher's Note: Subtracting equilibria means dividing constants: KC = KC2/KC1.
Exam Note: Dividing K values corresponds to subtracting reactions.
Question 116. To 500 mL of 0.150 M AgNO3 solution were added 500 mL of 1.09 M Fe2+ solution and the reaction is allowed to reach an equilibrium at 25°C. Ag+(aq.) + Fe2+(aq.) ⇌ Fe3+(aq.) + Ag(s). For 25 mL of the solution, 30 mL of 0.0832 M KMnO4 were required for oxidation. Calculate equilibrium constant for the reaction at 25°C.
Solution. Millimole before reaction: Ag+ = 500 × 0.150 = 75; Fe2+ = 500 × 1.09 = 545. Millimole after reaction: (75 − x), (545 − x), x. Since mM = Meq. (both Ag+/Ag and Fe2+/Fe3+ have valency factor unity), KC = [Fe3+]/([Ag+][Fe2+]) = (x/1000)/(((75 − x)/1000)((545 − x)/1000)) ...(1) (conc. = millimole/total volume 1000 mL). Now 25 mL of mixture requires 30 mL of 0.0832 M or 0.0832 × 5 N KMnO4. Fe2+ is oxidised by KMnO4. Milliequivalent of Fe2+ left at equilibrium in 1000 mL = milliequivalent of KMnO4 for 1000 mL = (30 × 0.0832 × 5 × 1000)/25 = 499.2. So 545 − x = 499.2, x = 545 − 499.2 = 45.8. By Eq. (1): KC = (45.8/1000)/((29.2/1000) × (499.2/1000)) = (45.8 × 1000)/(29.2 × 499.2) = 3.142.
Teacher's Note: KMnO4 titration gives Fe2+ left (n-factor 5); the difference from 545 mmol is Fe3+ formed, x.
Exam Note: KMnO4 n-factor is 5 in acid; scale 25 mL to 1000 mL.
Question 117. For the reaction, 2Fe3+(aq.) + (Hg2)2+(aq.) ⇌ 2Fe2+(aq.) + 2Hg2+(aq.), KC = 9.14 × 10-6 at 25°C. If the initial concentration of the ions are Fe3+ = 0.5 M, (Hg2)2+ = 0.5 M, Fe2+ = 0.03 M and Hg2+ = 0.03 M. What will be the concentrations of ions at equilibrium?
Solution. Concentration before reaction: Fe3+ 0.5, (Hg2)2+ 0.5, Fe2+ 0.03, Hg2+ 0.03. Concentration after reaction at equilibrium: (0.5 − a), (0.5 − a/2), (0.03 + a), (0.03 + a). KC = 9.14 × 10-6 = [Fe2+]2[Hg2+]2/([Fe3+]2[(Hg2)2+]) = (0.03 + a)2(0.03 + a)2/((0.5 − a)2(0.5 − a/2)). So a = 0.0027 (solving exactly gives a = 0.00259; the concentrations below agree to three significant figures). [Fe3+] = 0.5 − 0.0027 = 0.4973 M; [Hg22+] = 0.5 − 0.0027/2 = 0.4987 M; [Fe2+] = 0.03 + 0.0027 = 0.0327 M; [Hg2+] = 0.03 + 0.0027 = 0.0327 M.
Teacher's Note: K is tiny, so little reaction occurs; Fe3+ and Hg22+ fall by 2 : 1 as products rise.
Exam Note: Stoichiometry: Fe3+ loses a, Hg22+ loses a/2.
Question 118. 0.1 mole each of ethyl alcohol and acetic acid were allowed to react and at equilibrium, the acid was exactly neutralised by 100 mL of 0.85 N NaOH. If no hydrolysis of ester is supposed to have undergone, find KC.
Solution. CH3COOH + C2H5OH ⇌ CH3COOC2H5 + H2O. Before reaction: 0.1, 0.1, 0, 0. At equilibrium: (0.1 − x), (0.1 − x), x, x. Meq. of acetic acid left = Meq. of NaOH used = 100 × 0.85 = 85. Millimole of acetic acid left = 85 (monobasic). Mole of acetic acid left = 0.085, or (0.1 − x) = 0.085, x = 0.015. KC = x2/(0.1 − x)2 = (0.015)2/(0.085)2 = 0.031.
Teacher's Note: NaOH titration gives acetic acid left (0.085 mol); the 0.015 mol consumed equals ester and water formed.
Exam Note: Acetic acid is monobasic: meq equals mmol.
Question 119. The rate of formation of the complex [Fe(dipy)3]2+ at 25°C following the reaction Fe2+ + 3dipy → [Fe(dipy)3]2+ is given as: rate = 1.45 × 1013[Fe2+][dipy]3. The rate of disappearance of complex is given as: rate = 1.22 × 10-4[Fe(dipy)3]2+. Calculate the stability constant of complex. dipy is abbreviated for a chelating agent dipyridyl.
Solution. For the reaction Fe2+ + 3dipy ⇌ [Fe(dipy)3]2+: rforward = Kf × [Fe2+][dipy]3 = 1.45 × 1013[Fe2+][dipy]3; rbackward = Kb × [Fe(dipy)3]2+ = 1.22 × 10-4[Fe(dipy)3]2+. At equilibrium rf = rb and KC = Kf/Kb = [Fe(dipy)3]2+/([Fe2+][dipy]3). Also, stability constant of complex = equilibrium constant of reaction = Kf/Kb = 1.45 × 1013/(1.22 × 10-4) = 1.188 × 1017.
Teacher's Note: At equilibrium forward and backward rates are equal, so K = k(forward)/k(backward), which is the stability constant.
Exam Note: Stability constant = kf/kb.
Question 120. For the reaction Ag(CN)2− ⇌ Ag+ + 2CN−, the KC at 25°C is 4 × 10-19. Calculate [Ag+] in solution which was originally 0.1 M in KCN and 0.03 M in AgNO3. (IIT 1994)
Solution. 2KCN + AgNO3 → Ag(CN)2− + KNO3 + K+: 0.1, 0.03 → (0.1 − 0.06), 0 → 0.03, 0.03, 0.03. So [Ag(CN)2−] = 0.03 M, leaving 0.04 M CN−. Now use Ag(CN)2− ⇌ Ag+ + 2CN−: 0.03 → (0.03 − a), a, (0.04 + 2a). Since KC is too small and dissociation of Ag(CN)2− is very less: 0.04 + 2a ≈ 0.04 and 0.03 − a ≈ 0.03. So [Ag(CN)2−] = 0.03; [Ag+] = a; [CN−] = 0.04. KC = [Ag+][CN−]2/[Ag(CN)2−] = a × (0.04)2/0.03, so a = 7.5 × 10-18 M.
Teacher's Note: First form the complex completely (uses 0.06 M CN−, leaving 0.04 M), then treat its tiny dissociation.
Exam Note: Complex forms first; neglect a against 0.03 and 0.04.
Question 121. The equilibrium constant for the reaction: H3BO3 + glycerine ⇌ (H3BO3·glycerine) complex is 0.90. How much glycerine should be added to one litre of 0.10 M H3BO3 solution, so that 60% of the H3BO3 is converted to boric acid-glycerine complex?
Solution. H3BO3 + glycerine ⇌ complex; K = [Complex]/([H3BO3][glycerine]) = 0.9. Initial: 0.10, a, 0. At equilibrium: (0.1 − x), (a − x), x, where x = 60 × 0.1/100 = 0.06. If 60% of H3BO3 gives complex, [H3BO3] left = 40%. Given [Complex]/[H3BO3] = 60/40. Thus, 0.9 = 60/(40[glycerine]), or [glycerine] (= a − x) = 60/(40 × 0.9) = 1.67 M. Therefore a = 1.67 + x = 1.67 + 0.06 = 1.73 M.
Teacher's Note: Free glycerine needed is (60/40)/0.9 = 1.67 M; add the 0.06 M consumed in forming the complex.
Exam Note: Added = free glycerine + glycerine bound in complex.
Question 122. For gaseous reaction A + B ⇌ C, the equilibrium concentration of A and B at a temperature are 15 mol litre-1. When volume is doubled the reaction had equilibrium concentration of A as 10 mol litre-1. Calculate: (a) KC (b) concentration of C in original equilibrium.
Solution. A + B ⇌ C. Conc. at I equilibrium: 15, 15, a (volume is V litre). Conc. when V is doubled: 15/2, 15/2, a/2 (volume is 2V litre). Since on increasing volume, pressure decreases and the reaction proceeds in the direction where it shows an increase in mole, i.e. backward reaction. Conc. at II equilibrium: (15/2 + x), (15/2 + x), (a/2 − x). 15/2 + x = 10, so x = 5/2. KC = [C]/([A][B]) = [(a − 5)/2]/(10 × 10) ...(1) for II equilibrium. KC = a/(15 × 15) ...(2) for I equilibrium. KC are the same: ((a − 5)/2)/(10 × 10) = a/(15 × 15), so a = 45 M (concentration of C in the original equilibrium). KC = 45/(15 × 15) = 0.2 mol-1 litre.
Teacher's Note: Doubling volume halves concentrations and shifts backward; A rising 7.5 to 10 gives x = 2.5, then equate K.
Exam Note: Same KC at both equilibria; solve for [C].
Question 123. When NO and NO2 are mixed, the following equilibria are readily obtained; 2NO2 ⇌ N2O4, KP = 6.8 atm-1 and NO + NO2 ⇌ N2O3. In an experiment when NO and NO2 are mixed in the ratio of 1 : 2, the final total pressure was 5.05 atm and the partial pressure of N2O4 was 1.7 atm. Calculate: (a) the equilibrium partial pressure of NO (b) KP for NO + NO2 ⇌ N2O3.
Solution. For I equilibrium 2NO2 ⇌ N2O4: KP = P′N2O4/(P′NO2)2 = 6.8 ...(1). Since P′N2O4 = 1.7 atm, by Eq. (1) P′NO2 = 0.5 atm. The equilibria are maintained using NO and NO2 in the ratio 1 : 2. For II equilibrium NO + NO2 ⇌ N2O3: initial pressure P, 2P, 0; pressures at equilibrium (P − x), (2P − x − 3.4), x. 3.4 atm of NO2 are used for I equilibrium to have P′N2O4 = 1.7 atm. At equilibrium: (P − x), 0.5, x (P′NO2 is same for both the equilibria since both reactions are at equilibrium at a time). Total pressure at equilibrium (given 5.05 atm) = P′NO + P′NO2 + P′N2O3 + P′N2O4 = P − x + 0.5 + x + 1.7, so 5.05 = P + 2.20, P = 2.85 atm. Since 2P − x − 3.4 = 0.5: 2 × 2.85 − x − 3.4 = 0.5, x = 5.70 − 3.90, x = 1.80 atm. (a) P′NO = 2.85 − 1.80 = 1.05 atm. (b) KP for NO + NO2 ⇌ N2O3 = P′N2O3/(P′NO × P′NO2) = 1.80/(1.05 × 0.5) = 3.43 atm-1.
Teacher's Note: NO2 pressure is common to both equilibria; the first K fixes it at 0.5 atm.
Exam Note: Both equilibria share one PNO2 value.
Question 124. Following two equilibria are established on mixing two gases A2 and C: (i) 3A2(g) ⇌ A6(g), KP = 1.6 atm-2; (ii) A2(g) + C(g) ⇌ A2C(g). If A2 and C are mixed in 2 : 1 molar ratio, calculate the equilibrium partial pressure of A2, C, A2C and KP for the reaction (ii). Given that the total pressure to be 1.4 atm and partial pressure of A6 to be 0.2 atm.
Solution. 3A2 ⇌ A6: KP = 1.6 = P′A6/(PA2)3, so PA2 = (0.2/1.6)1/3 = 0.5 atm. Also, pressure of A2 used for the formation of A6 = 0.6 atm. For A2(g) + C(g) ⇌ A2C(g): at t = 0: 2P, P, 0; at eq.: 2P − P′ − 0.6, P − P′, P′. For 3A2 ⇌ A6: at t = 0: 2P, 0; at eq.: 2P − P′ − 0.6, 0.2. So 2P − P′ − 0.6 = 0.5 (since PA2 at eq. is 0.5 for simultaneous equilibria). Pressure of A2 + C + A2C + A6 = (2P − P′ − 0.6) + (P − P′) + P′ + 0.2 = 1.4, i.e. 0.5 + P + 0.2 = 1.4, so P = 0.7 atm. Then P′ = 2 × 0.7 − 0.6 − 0.5 = 0.3 atm. PA2 = 0.5 atm, PC = 0.7 − 0.3 = 0.4 atm, PA2C = 0.3 atm. KP for A2(g) + C(g) ⇌ A2C(g) = PA2C/(PA2 × PC) = 0.3/(0.5 × 0.4) = 1.5 atm-1.
Teacher's Note: A2 is shared by both equilibria, so the first K fixes P(A2) = 0.5 atm; total pressure fixes the rest.
Exam Note: Use the common species A2 to link the equilibria.
Question 125. 1 mole of A in 1 litre vessel maintained at constant T shows the equilibria: A(g) ⇌ B(g) + 2C(g), KC1; C(g) ⇌ 2D(g) + 3B(g), KC2. If the equilibrium pressure is (13/6) times of initial pressure and [C]eq. = (4/9)[A]eq., calculate KC1 and KC2.
Solution. Let a mole of A react in the first equilibrium and b mole of C react in the second. Moles at equilibrium: A = 1 − a; B = a + 3b; C = 2a − b; D = 2b. Σ mole at eq. = 1 − a + a + 3b + 2a − b + 2b = 2a + 4b + 1. Now Pinitial ∝ 1 and Peq. ∝ 2a + 4b + 1, so 2a + 4b + 1 = 13/6, or 2a + 4b = 7/6 ...(1). Also [C]eq. = (4/9)[A]eq.: 2a − b = (4/9)(1 − a), so 22a − 9b = 4 ...(2). By Eqs. (1) and (2): a = 0.25, b = 0.167. KC1 = [B][C]2/[A] = (a + 3b)(2a − b)2/(1 − a) = [0.25 + (3 × 0.167)][0.5 − 0.167]2/(1 − 0.25) = 0.11. KC2 = [D]2[B]3/[C] = (2b)2(a + 3b)3/(2a − b) = [2 × 0.167]2[0.25 + (3 × 0.167)]3/[0.5 − 0.167] = 0.141 (the book prints 0.142; with b = 1/6 exactly the value is 0.1406).
Teacher's Note: Track two extents a and b; the pressure ratio and the [C]:[A] ratio give two equations for a and b.
Exam Note: Two unknowns need two relations: pressure and concentration ratio.
Question 126. Solid NH4I on rapid heating in a closed vessel at 357°C develops a constant pressure of 275 mm Hg owing to partial decomposition of NH4I into NH3 and HI, but the pressure gradually increases further (when the excess solid residue remains in the vessel) owing to dissociation of HI. Calculate the final pressure developed at equilibrium. KP for dissociation of HI is 0.015 at 357°C.
Solution. NH4I ⇌ NH3 + HI ...(1) (P, P). For this equilibrium 2P = 275, so P = 137.5. Thus KP for Eq. (1) = PNH3 × PHI = 137.5 × 137.5 ...(2). For 2HI ⇌ H2 + I2: 1, 0, 0 → (1 − x), x/2, x/2; KP = KC = x2/(4(1 − x)2) = 0.015, so x/(2(1 − x)) = √0.015 and x ≈ 0.2, i.e. the degree of dissociation of HI is about 0.2. Since HI decomposes, reaction (1) proceeds in the forward direction. The book then writes KP = (P + A)(P − a) = (P + A)(0.8P) = 137.5 × 137.5, P + A = 171.875, A = 34.375, and total pressure = 2P + A = 2 × 137.5 + 34.375 = 309.75 (printed with unit atm). Corrected: the HI pressure should be (P + A − a), not (P − a). Solving exactly: let PHI = h, PH2 = PI2 = y, PNH3 = p. Then y/h = √0.015 = 0.1225 and p = h + 2y = 1.245h. From p × h = (137.5)2: h = 123.2, p = 153.4, y = 15.1 mm Hg. Total pressure = p + h + 2y = 153.4 + 123.2 + 30.2 ≈ 307 mm Hg (not 309.75 atm; the unit is mm Hg).
Teacher's Note: Two coupled equilibria: HI is lost to H2 and I2, so NH3 pressure ends above HI pressure.
Exam Note: NH3 pressure equals HI + 2 × H2 pressure.
Question 127. N2 and O2 combine at a given temperature to produce NO. At equilibrium the yield of NO is 'x' per cent by volume. If x = √(K·a·b) − K(a + b)/4 where K is the equilibrium constant of the given reaction at the given temperature and a and b the volume percentage of N2 and O2 respectively in the initial pure mixture, what should be the initial composition of the reacting mixture in order that maximum yield of NO is ensured? Also report the maximum value of K at which 'x' is maximum.
Solution. N2 + O2 ⇌ 2NO: initial vol. % a, b, 0; final vol. % ..., x. Given x = √(K·a·b) − K(a + b)/4 ...(1). The 'x' is maximum only when the conditions of maximum are fulfilled, i.e. ∂x/∂a = 0 and ∂x/∂b = 0. By partial differentiation of x w.r.t. a keeping b constant: ∂x/∂a = K·b/(2√(K·a·b)) − K/4 = √(K·b)/(2√a) − K/4 = 0 ...(2). By partial differentiation of x w.r.t. b keeping a constant: ∂x/∂b = K·a/(2√(K·a·b)) − K/4 = √(K·a)/(2√b) − K/4 = 0 ...(3). By Eq. (2): K·a·b = 4b2; by Eq. (3): K·a·b = 4a2. Therefore a = b, i.e. the initial mixture should contain N2 and O2 in equal volume proportion (1 : 1). Note: this is valid only when K < 4, because if a = b, Eq. (1) yields x = √(K·a2) − K·a/2 = a(√K − K/2). If x is positive, √K > K/2, or 4K > K2, or K(4 − K) > 0, or 0 < K < 4 (so the limiting value of K is 4).
Teacher's Note: Both partial derivatives zero give a = b (1:1 mixture); x stays positive only for K below 4.
Exam Note: Maximum yield needs equal N2 and O2.