LA Sena Solutions for JEE Physics: Chapter 07 Alternating Current
Access comprehensive textbook solutions for Chapter 07 Alternating Current using the LA Sena reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice JEE Physics Solutions: Chapter 07 Alternating Current
View or download the dedicated Chapter 07 Alternating Current solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Chapter 7 Alternating Current - Problems 7.1 to 7.14
Alternating Current
Question 7.1. Using a Rogowski loop (see Problem 5.30), one can measure the effective value Ieff of an alternating current flowing in a conductor. The loop has a rectangular cross section with N turns, inner radius R1, outer radius R2 and height h, placed around the conductor as in the figure. Determine the effective emf generated in the loop by the alternating current.
Solution. The segment of the loop cross-section of width dr and height h is penetrated by flux dΦ = Bh dr, where B = μ0I/2πr. Hence Φ = (μ0hI/2π) ∫R1R2 dr/r = (μ0hI/2π) ln(R2/R1). The flux linkage with the loop is Ψ = (μ0hIN/2π) ln(R2/R1). With I = I0 cos ωt, the induced emf is ℰi = −dΨ/dt = (μ0hI0Nω/2π) ln(R2/R1) sin ωt. Finally, the effective value is ℰi eff = (μ0hNωIeff/2π) ln(R2/R1).
Teacher's Note: Flux of a straight wire integrated over the rectangular section; emf is the derivative of linkage.
Exam Note: Show dΦ = Bh dr integral, then differentiate.
Question 7.2. The figure shows the vector diagram of reactances and resistances in an AC circuit (Lω, R, 1/Cω and the impedance Z = ℰ0/I0; in the figure 1/Cω is four times Lω). Construct a similar diagram for a circuit in which the current frequency is doubled and the emf amplitude is the same, and determine how the current will change as a result of this.
Solution. The figure shows that the capacitive reactance is four times the inductive reactance. If the frequency is doubled, the first quantity will decrease by a half and the second will double, which means they will become equal. In the new diagram the ratio ℰ0/I0 (the impedance) decreases, and since ℰ0 must remain unchanged, the current grows. The same follows analytically. The amplitude of the current is I0 = ℰ0/√(R2 + (1/Cω − Lω)2). Before the change 1/Cω > Lω, hence (1/Cω − Lω)2 > 0. After the frequency is doubled, 1/Cω = Lω, and I0 = ℰ0/R (the current increases; resonance).
Teacher's Note: Reactances 4:1 become 2:2 on doubling ω, giving resonance, Z = R.
Exam Note: State the new reactances, then the result I0 = ℰ0/R.
Question 7.3. What is the frequency dependence of the current, of the phase shift between voltage and current, and of the consumed power for a circuit consisting of a resistance and an inductance connected in series provided that the emf amplitude remains constant?
Solution. The current in the circuit is I = I0 sin(ωt + φ), where the amplitude is I0 = ℰ0/(R cos φ − Lω sin φ), or I0 = ℰ0/√(R2 + L2ω2), and the tangent of the phase of the current with respect to the voltage is tan φ = −Lω/R. From these expressions it follows that as the frequency grows, the lag of the current phase in relation to the voltage phase increases, which results in a decrease in the current. The average power in the circuit is defined thus: P = ½ ℰ0I0 cos φ. As the frequency grows, the amplitude of the current decreases and so does the power factor, which is the cosine of the phase shift between voltage and current. The power will also decrease as a result.
Teacher's Note: Rising ω raises Z and the lag, so I, cos φ and P all fall.
Exam Note: Quote I0, tan φ and P formulas with the trend.
Question 7.4. What is the frequency dependence of the current, of the phase shift between current and voltage, and of the consumed power for a circuit consisting of a resistance and a capacitance connected in series provided that the emf amplitude remains constant?
Solution. The current in the circuit is I = I0 sin(ωt + φ), where the amplitude is I0 = ℰ0/(R cos φ + (1/Cω) sin φ), or I0 = ℰ0/√(R2 + 1/C2ω2), and the tangent of the phase shift of the current with respect to the voltage is tan φ = 1/RCω. From these expressions it follows that as the frequency grows, the phase shift by which the current leads the voltage decreases and tends to zero, while the current grows. The average power in the circuit, defined as P = ½ ℰ0I0 cos φ, increases with frequency, since cos φ tends to unity and so does the amplitude value of the current.
Teacher's Note: Opposite of RL: capacitive reactance falls with ω, so current and power rise.
Exam Note: Contrast with the RL circuit; state tan φ = 1/RCω.
Question 7.5. A circuit (Figure (a)) contains an alternating emf, a resistance, and a reactive element (only a capacitance or only an inductance). What is this element if the time dependences of the current in the circuit and the emf of the source are those as shown in Figure (b)?
Solution. The figure accompanying the problem shows that the current leads the voltage in phase by 0 < φ < π/2. This happens if a capacitance is connected in series with the resistance.
Teacher's Note: Current leading emf by less than π/2 indicates a capacitor with series resistance.
Exam Note: Remember: capacitor, current leads; inductor, current lags.
Question 7.6. Are the readings of the ammeter A3 equal to the sum of the readings of the ammeters A1 and A2 for the cases depicted in Figures (a) and (b)? (In (a) a resistance R is in parallel with an inductance L; in (b) R is in parallel with a capacitance C; A1 is in the resistance branch, A2 in the other branch and A3 in the main line.)
Solution. For case (a), ignoring the resistances of the ammeters: I1 = (U0/R) sin ωt = I01 sin ωt, I2 = (U0/Lω) sin(ωt − π/2) = −I02 cos ωt, where U0 is the amplitude of the voltage between points 1 and 2. The current I3 through ammeter A3 is the sum of currents I1 and I2: I3 = I03 sin(ωt + φ). The amplitude is I03 = √(I012 + I022), and the phase shift of the current in relation to the voltage is tan φ = −I02/I01. Since the ammeters measure the effective value of the current, Ieff = I0/√2, we have I3 eff = √(I1 eff2 + I2 eff2).
In case (b), the currents through the resistance and the capacitance differ in phase by π/2, the only difference being that the current through the capacitor leads the applied voltage, while the current through the inductance lags behind it. I1 = (U0/R) sin ωt = I01 sin ωt, I2 = U0Cω sin(ωt + π/2) = I02 cos ωt. The amplitude of the current at A3 is I03 = √(I012 + I022), while tan φ = I02/I01, and I3 eff = √(I1 eff2 + I2 eff2) < I1 eff + I2 eff. Answer: no, in both cases A3 reads less than the sum of the readings of A1 and A2.
Teacher's Note: Branch currents are 90° out of phase, so effective values add in quadrature, not arithmetically.
Exam Note: State 'no' and give the quadrature relation.
Question 7.7. Are the readings of the voltmeter V3 equal to the sum of the readings of the voltmeters V1 and V2 for the cases depicted in Figures (a) and (b)? (In (a) a resistance R is in series with a capacitance C; in (b) R is in series with an inductance L; V1 is across R, V2 across the reactive element, V3 across both.)
Solution. For case (a), the voltage between points 1 and 2 is U1 = I0R sin ωt = U01 sin ωt, while that between points 2 and 3 is U2 = (I0/Cω) sin(ωt − π/2) = −(I0/Cω) cos ωt = −U02 cos ωt. The voltage between points 1 and 3 is the sum of U1 and U2: U3 = U1 + U2 = U03 sin(ωt + φ). Its amplitude is U03 = √(U012 + U022), while the phase shift with respect to the applied voltage is given by tan φ = −U02/U01. Since the voltmeters measure Ueff = U0/√2, we have U3 eff = √(U1 eff2 + U2 eff2) < U1 eff + U2 eff.
For case (b), just like in the previous case, the voltages across the resistance and the inductance differ in phase by π/2, the only difference being that here the current lags behind the voltage, while in the previous case the current flowing through the capacitor leads the voltage (and, hence, the phase shift between the voltages across the resistance and across the capacitance is −π/2). The respective voltages are U1 = I0R sin ωt = U01 sin ωt, U2 = I0Lω sin(ωt + π/2) = U02 cos ωt and U3 = U3 sin(ωt + φ). The amplitude is U03 = √(U012 + U022), the readings satisfy U3 eff = √(U1 eff2 + U2 eff2) < U1 eff + U2 eff, and the tangent of the phase of the voltages is tan φ = U02/U01. Answer: no, in both cases V3 reads less than the sum of V1 and V2.
Teacher's Note: Series voltages across R and a reactance are 90° apart; add them as a vector sum.
Exam Note: Answer 'no' with quadrature sum, not algebraic.
Question 7.8. The current flowing through the resistance in an AC circuit shown in Figure (a), where a resistance R, a capacitance C, and an inductance L are connected in series, is I = ℰ/R. What will be the current in the AC circuit when the inductance and the capacitance connected in parallel are connected in series with the resistance (Figure (b))?
Solution. In the first case we have resonance, at which the voltages across the capacitor and the inductance, UC = (I0/Cω) sin(ωt − π/2) and UL = I0Lω sin(ωt + π/2) (7.8.1), are equal in magnitude and opposite in phase. From Eq. (7.8.1) and the fact that a capacitor and an inductance connected in series do not change the current it follows that 1/Cω = Lω. For the case where a capacitance and an inductance are connected in parallel, in each of these elements there flows a current IC = U0Cω sin(ωt − π/2) and IL = (U0/ωL) sin(ωt + π/2). The total current is I = U0(Cω − 1/Lω) cos ωt, and, since Cω = 1/Lω, I = IC + IL = 0.
Teacher's Note: At resonance 1/Cω = Lω, so the parallel LC branch currents cancel and the line current is zero.
Exam Note: Equate Cω and 1/Lω; the currents cancel exactly.
Question 7.9. The power in an AC circuit varies with time according to the curve in the figure. How, knowing the maximal and minimal values of the power, to determine the numerical value of the phase shift between voltage and current? What is the period of variation of the power?
Solution. If the voltage varies according to the law U = U0 sin ωt and there is a definite phase shift between voltage and current, so that I = I0 sin(ωt + φ) (where the phase difference φ may be either positive or negative), then the instantaneous value of the power is P = U0I0 sin(ωt + φ) sin ωt. If we write sin(ωt + φ) sin ωt = sin2ωt cos φ + sin ωt cos ωt sin φ = ½[(1 − cos 2ωt) cos φ + sin 2ωt sin φ], we get P = ½[cos φ − cos(2ωt + φ)] U0I0 (7.9.1). The maximal value of the power is Pmax = ½U0I0(cos φ + 1), while the minimal value is Pmin = ½U0I0(cos φ − 1). Whence the power factor is cos φ = (Pmax + Pmin)/(Pmax − Pmin) (bear in mind that Pmin is negative). Formula (7.9.1) shows that the frequency of power variation is twice the frequency of the applied voltage, so the period of variation of the power is half the period of the voltage, T = π/ω. During one period of voltage variation the power passes twice through the maximum and the minimum. Particular cases: (1) φ = 0. The load is a purely active resistance. In this case (Figure (a) accompanying the answer) Pmin = 0 and Pmax = U0I0. (2) φ = ±π/2. The circuit contains only a reactive element, that is, a capacitor or an inductance. Since in this case cos φ = 0, we have (Figure (b) accompanying the answer) Pmax = −Pmin. The work performed by the AC source over one period of variation of the power is zero. This means that during one half of the period the energy flows from the AC source to the reactive element in the form of the electrostatic energy of the capacitor or the magnetic energy of the inductance, while during the other half the energy is returned to the AC source.
Teacher's Note: Power oscillates at 2ω; cos φ from (Pmax+Pmin)/(Pmax−Pmin), with Pmin negative.
Exam Note: Use sign of Pmin carefully; power period is T/2.
Question 7.10. To demagnetize watches that have been accidentally magnetized, they are placed inside a solenoid connected to an AC source. The watches are then slowly removed from the solenoid. Explain why the watches become demagnetized as a result of such manipulations.
Solution. When a watch is inside the solenoid, the magnetic field generated by the solenoid forces the steel parts of the watch to change periodically their magnetization, following the hysteresis loop. When the watch is slowly removed from the solenoid, the magnetic field acting on the watch gradually decreases, and as the periods pass, the hysteresis loop shrinks. Each second 50 hysteresis loops are traversed, each being smaller than the previous one (the number 50 appears because the frequency of the AC source is usually 50 Hz). This process is roughly sketched in the figure. When the watch is completely removed from the magnetic field, it proves to be completely demagnetized.
Teacher's Note: Slowly decreasing alternating field shrinks the hysteresis loop to the origin, leaving zero remanence.
Exam Note: Mention shrinking hysteresis loops, 50 Hz cycles.
Question 7.11. A full-wave rectifier (the circuit is shown in the figure: four diodes 1-4 in a bridge between terminals a and b of the AC source, with load R) rectifies the current that flows continuously in one winding. Sketch the time dependence of the current, ignoring all losses, and, assuming that the load of the rectifier constitutes a resistance, calculate the average value of the current. If the rectifier is loaded to a primary winding of a transformer, is a constant emf generated in the secondary winding?
Solution. At the moment when the "plus" of the voltage is at terminal a, the current passes through diode 2, resistor R, diode 3, and returns to the AC source through terminal b, which has the "minus" of the voltage at that moment. After the applied voltage changes sign, the current from terminal b passes through diode 4, resistor R, diode 1, and returns to the AC source via the negative terminal a. Thus, the current that passes through R consists of a series of alternating halves of sinusoids (Figure (a)). The average value of the current over one or any integral number of half-periods is Iav = (2I0/Tω) ∫0T/2 sin ωt dt·ω = 4I0/Tω = 2I0/π ≈ 0.637I0. In carrying out this calculation it was assumed that the voltage drop across the diodes is negligible and that the rectification process does not alter the sinusoidal nature of the emf. As for the emf that is generated in the secondary winding of a transformer whose primary winding is the load resistance R, it must have two opposite symmetrical sections, since each half-period of the pulsating current has an ascending section and a descending section. An idealized curve of the voltage in the secondary winding of a transformer is shown in Figure (b). Actually, the curve is much smoother because of the transformer, which plays the role of a choke coil, the interturn capacitance, and other factors. The approximate shape of the voltage curve on the transient sections is depicted by a dashed curve. So the emf in the secondary winding is not constant: it alternates between positive and negative sections.
Teacher's Note: Average of |sin| over a half-period is 2/π; a transformer responds only to changes in current.
Exam Note: Average = 2I0/π; do not use I0/2.
Question 7.12. In the circuit shown in the Figure (the output of a full-wave rectifier is connected in parallel to a capacitor of capacitance C and a resistor R), a capacitor of capacitance C is connected in parallel with a resistor R. How will this influence the time dependence of the current?
Solution. After the rectifier the current branches out (see the arrows in the figure accompanying the problem). A fraction of the current flows through resistor R and a fraction is used to charge the capacitor. If the internal resistance of the source (together with the diodes) is low, then the voltage across the capacitor is equal to the voltage at the "out" terminals. This occurs as long as the voltage is lower than the maximum of the pulsating voltage. After the voltage passes the maximum, it falls off and becomes lower than the voltage across the capacitor. Because of this the capacitor will begin to discharge through the resistor, with the voltage across the capacitor decaying according to the law U = U0 exp(−t/RC) (the discharge current is designated by arrows in the figure accompanying the answer). The greater the capacitance, the slower the decay, which continues until the voltage across the capacitor becomes equal to the growing voltage in the following half-wave. Then the capacitor is charged to the maximum of the voltage anew. The process continues in this manner. Thus, a capacitor in the circuit makes the "out" voltage smoother, and the higher the capacitance the stronger the effect. The curve representing the time variation of the current flowing through the resistor follows the voltage curve in parallel.
Teacher's Note: Capacitor charges at peaks and discharges via R with time constant RC, smoothing the ripple.
Exam Note: Mention exp(−t/RC); larger C gives smoother output.
Question 7.13. Two semiconductor diodes in opposition to each other in series are connected to the primary winding of a transformer. Draw the oscillograms of the current in the primary winding and of the emf generated in the secondary winding.
Solution. For both directions of the emf applied to the transformer, the current limited by the diode introduced into the circuit in the blocking direction. This current is caused by the motion of the minority (intrinsic) charge carriers and reaches a plateau very rapidly as the voltage is increased. The diode introduced in the conducting direction does not limit the current. For this reason, the oscillogram of the current in the primary circuit has the form shown in Figure (a): a nearly flat plateau in each direction, with rapid changes of current near the reversals. Accordingly, the greater fraction of time in each half-period (in each direction) the emf induced in the secondary winding is zero. Only over small time intervals when the current passes through zero does an emf emerge, first in one direction and then in the other (Figure (b)): narrow pulses of one sign, then of the opposite sign. Note that the oscillograms here are, of course, only rough sketches, since they do not take into account the inductances in transformer circuits. Note that in modern semiconductor diodes the reverse current is negligible, with the result that the problem is of purely academic interest.
Teacher's Note: Reverse saturation current is constant, so secondary emf (proportional to dI/dt) appears only at current reversals.
Exam Note: Secondary emf is proportional to dI/dt, not I.
Question 7.14. Two vacuum diodes in opposition to each other in parallel are connected to the primary winding of a transformer. The amplitude of the emf applied to the primary winding exceeds considerably the voltage at which the diodes go into the saturation mode. Draw the oscillograms of the current in the primary winding and of the emf generated in the secondary winding.
Solution. In some respects this problem resembles the previous one. Here, too, the current in the primary circuit is limited to the saturation current in one of the diodes, introduced into the circuit in the conducting direction rather than in the blocking. In contrast to Problem 7.13, the present one possesses a special feature that manifests itself in the initial section near the zero of the current in the circuit. While in a semiconductor diode the current increases with voltage almost linearly in the initial section, in a vacuum diode the voltage dependence of the current is described with sufficient accuracy by the three-halves power law I = KU03/2. The constant K incorporates universal constants and the distance between the electrodes in the diode. Since the voltage varies with time according to the sinusoidal law, the current flowing through the initial section of the voltage increase must be written in the form I = KU03/2 sin3/2 ωt (the function f(α) = sin3/2 α is depicted in Figure (a)). Allowing for this dependence we obtain the oscillograms of current in the primary circuit (Figure (b)) and of the emf in the secondary circuit (Figure (c)): the current rises as sin3/2 to a flat saturation plateau in each direction, and the secondary emf appears as two pulses (on the rise and on the fall of the current) in each half-period. Just as in the previous problem, we have not allowed for the effects associated with the presence of inductances in the transformer circuits.
Teacher's Note: Child-Langmuir 3/2 power law rises, then saturates; secondary emf follows dI/dt, giving paired pulses.
Exam Note: Cite I = KU3/2 and saturation plateau.
LA Sena Solutions for JEE Mathematics: LA Sena Solutions Physics Chapter 7 Alternating Current
Access JEE Mathematics Solutions
Explore reliable mathematical solutions for LA Sena Solutions Physics Chapter 7 Alternating Current tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your JEE Exam Preparation
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the LA Sena book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.