LA Sena Solutions Physics Chapter 5 Electromagnetism

Step-by-Step LA Sena Solutions for JEE Physics Chapter 05 Electromagnetism

Review structured textbook solutions for JEE Physics Chapter 05 Electromagnetism prepared by LA Sena. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 05 Electromagnetism Textbook Solutions PDF

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 5 Electromagnetism - Problems 5.1 to 5.41

Electromagnetism: Problems 5.1 to 5.41

Question 5.1. Currents I1 and I2 flow in the same direction along two parallel conductors, with I1 > I2. In which of the three regions I, II or III (Fig. 5.1: region I lies above both conductors, II between them, III below both), and at what distance from the conductor carrying current I1 is the magnetic induction equal to zero?

Solution. By the right-hand screw rule, in region I and in region III the magnetic induction vectors of the two currents point the same way, so the resultant can vanish only at infinity. The same rule shows that only in region II do the two induction vectors point in opposite directions, so the resultant vanishes somewhere inside II. If a is the distance between the conductors and x the distance from the conductor carrying I1 to the point where the induction is zero, then
μ0μI1/(2πx) − μ0μI2/(2π(a − x)) = 0.
Hence x = I1a/(I1 + I2).

Teacher's Note: Fields oppose only between same-direction currents; equate magnitudes there. The null point lies nearer the smaller current.

Exam Note: Locate region first, then equate the two fields.

Question 5.2. Two mutually perpendicular conductors carrying currents I1 and I2 lie in one plane. Find the locus of points at which the magnetic induction is zero.

Solution. By the right-hand screw rule, the induction can vanish only in sectors I and III (the first and third quadrants of Fig. 5.2, where the currents are as drawn). Let y be the distance from the point to the conductor carrying I1 and x the distance from the point to the conductor carrying I2. Then
μ0μI1/(2πy) = μ0μI2/(2πx).
Hence the locus of points where the magnetic induction is zero is the straight line that passes through the point of intersection of the conductors and whose equation is y = (I1/I2)x.

Teacher's Note: Equal and opposite fields of two perpendicular wires give a straight line through the crossing point.

Exam Note: State the line equation and which sectors it lies in.

Question 5.3. Equal currents are flowing along three conductors: a ring of radius R (Fig. (a)), an infinitely long straight conductor that also forms a loop of the same radius R (Fig. (b)), and an infinitely long straight conductor that also forms a loop of radius R but is broken at the point where the loop touches the conductor (Fig. (c)). Find the relationships that link the magnetic induction vectors at the center of each circle.

Solution. The magnetic inductions generated by a straight conductor with a current and by a circular conductor are, respectively, B = μ0μI/(2πr) and B = μ0μI/(2r). In case (b) the directions of the two induction vectors coincide, while in case (c) they are opposite. Thus
Ba = μ0μI/(2R), Bb = (μ0μI/(2R))(1 + 1/π), Bc = (μ0μI/(2R))(1 − 1/π),
whence Bb = ((π + 1)/π)Ba = 1.32 Ba, Bc = ((π − 1)/π)Ba = 0.68 Ba.

Teacher's Note: Add or subtract wire field I/(2πR) and loop field I/(2R) depending on direction at the centre.

Exam Note: Show both formulas, then the 1.32 and 0.68 ratios.

Question 5.4. Three conductors carrying currents are perpendicular to the plane of the drawing. They intersect the plane at three points that lie on a single straight line, with the distances from the middle conductor to the other two being equal. The currents in the outer conductors flow away from the reader, while the current in the middle conductor flows toward the reader. How is the magnetic field vector directed at the point on the straight line that is perpendicular to the straight line passing through the three conductors in the plane of the drawing and is separated from the middle conductor by a distance equal to the distances between that conductor and the outer conductors? All three currents are equal in magnitude.

Solution. If the distance from the middle conductor to each of the other two conductors and to the point where we wish to determine the field is a, the magnetic field generated by each outer conductor at this point is H1 = I/(2πa√2). Using the right-hand screw rule, the vectors of the magnetic fields generated by the outer conductors are directed at an angle of 90°, so the resultant magnetic field strength is H1,2 = √2 H1 = I/(2πa), with the vector representing this resultant directed parallel to the line passing through the conductors. By the same rule, the field H3 generated by the middle conductor points in the direction opposite to that of the resultant H1,2, with H3 = I/2πa, that is, |H3| = |H1,2|. Thus the resultant of all three fields is zero.

Teacher's Note: Two outer fields at 90° combine to I/(2πa), exactly cancelling the middle conductor's field.

Exam Note: Answer: resultant field is zero; show the vector sum.

Question 5.5. Along four parallel conductors whose sections with the plane of the drawing lie at the vertices of a square there flow four equal currents (those marked with a cross point away from the reader, while those marked with a dot point to the reader). How is the vector of magnetic induction directed at the center of the square?

Solution. A magnetic induction vector is always directed along a tangent to a line of force (for each of the four conductors the line of force is a circle in the plane of the drawing). As the figure accompanying the answer shows, the magnetic inductions generated by currents I1 and I4 are directed along the diagonal of the square from the conductor carrying I4 to the conductor carrying I1. Reasoning along the same line, we conclude that the magnetic inductions generated by currents I2 and I3 are directed along the diagonal of the square from the conductor carrying I4 to the conductor carrying I1. The resultant induction of the magnetic field generated by all four currents, or the geometric sum of the magnetic induction vectors of the four, lies in the plane of the drawing and points from right to left.

Teacher's Note: B is tangent to circles around each wire; add the four vectors at the centre.

Exam Note: Answer in the plane of drawing, right to left.

Question 5.6. Two infinitely long parallel conductors carrying currents are directed at right angles to the plane of the drawing. The maximum of magnetic induction is at a point M that lies in the middle between the conductors. The direction of the magnetic induction vector B at this point coincides with the positive direction on the x axis. Determine the direction of the currents in the conductors and the relationship that exists between these currents.

Solution. The presence of a maximum in the middle between the conductors suggests that the currents in the conductors are flowing in opposite directions and that the currents are equal in magnitude. Allowing for the direction of the induction vector at point M and employing the right-hand screw rule (see the figure accompanying the answer), we conclude that in the upper conductor the current is directed toward the reader and in the lower, away from the reader.

Teacher's Note: Between opposite equal currents the fields add, giving a maximum at the midpoint.

Exam Note: State both direction and equality of currents.

Question 5.7. Two infinitely long parallel conductors carrying currents are directed at right angles to the plane of the drawing. The magnetic induction at a point M that lies in the middle between the conductors is zero. To the right of this point, the magnetic induction vector points upward, at right angles to the x axis. Find the direction of the currents flowing in the conductors, the direction of the induction vector to the left of point M, the relationship between the currents, and the point on the x axis at which the magnetic induction is maximal. The distance between the conductors is a.

Solution. At the point that lies in the middle between the conductors the induction is zero, which means that both currents flow in the same direction. Employing the right-hand screw rule, we can determine the direction of the magnetic induction vector in the region to the right of the conductors for both possible directions of current. As the problem states, the induction vector to the right of the conductors is directed upward. Hence the currents are flowing toward the reader (see the figure accompanying the answer). Zero induction at M also requires the currents to be equal; to the left of M the induction vector points downward (by symmetry of the circles of force). At a distance x from point M the induction is
B = μ0μIx / (π[x2 + (a/2)2]).
The derivative dB/dx = μ0μI[x2 + (a/2)2 − 2x2] / (π[x2 + (a/2)2]2) vanishes at x = a/2. It is at this distance that B is maximal, with Bmax = μ0μI/(πa).

Teacher's Note: Zero at midpoint means equal same-direction currents; maximise B(x) by setting dB/dx = 0.

Exam Note: Differentiate B(x); state x = a/2 and B_max.

Question 5.8. Prove solely by reasoning (without performing any calculations) that the magnetic induction on the axis at an end face of a very long solenoid is half the value in the middle of the solenoid. A "very long solenoid" is one whose length is much greater than the diameter.

Solution. The induction in the middle of a very long solenoid depends only on the number of ampere-turns per unit length of solenoid. Suppose that we have two very long, similar solenoids with equal ampere-turns per unit length and that these solenoids are placed far apart. We denote the induction in the middle of a solenoid by Bm and that at an end face, by Be.f. Let us bring these two solenoids together in such a manner that the directions of their magnetic inductions coincide and that the solenoids form a new long solenoid (the right end face of the left solenoid touches the left end face of the right solenoid). At the point where the two solenoids touch, the two induction vectors Be.f. add up and form the total field with induction 2Be.f. But this point is simply the middle of the new solenoid, where the induction, as we already know, is Bm. Thus, Bm = 2Be.f.

Teacher's Note: Join two identical long solenoids end to end; the junction is a middle point, so 2B_end = B_mid.

Exam Note: Argue by superposition; no calculation is needed.

Question 5.9. A current flows clockwise in a flat square loop. In the plane of the loop there lies an infinitely long straight conductor carrying a current whose direction is designated by the arrow in the figure. How will the loop move in the magnetic field created by the current flowing in the straight conductor and how will the shape of the loop change as a result of the action of this field?

Solution. Employing the left-hand rule, we will find that the force acting on the side of the loop parallel to the conductor and closest to it is directed toward the conductor while the force acting on the opposite side of the loop parallel to the conductor and farthest from it is directed away from the conductor. Since the first force is greater in magnitude, the loop moves toward the conductor. Employing the same rule once more, we will see that the force acting on the upper side of the loop is directed upward while that acting on the lower side is directed downward. Thus, the forces tend to pull the loop apart, that is, to increase the area subtended by the loop. This will actually happen if the material of the loop is elastic.
The answer can be obtained from a more general reasoning. The work done in displacing a loop carrying a current in a magnetic field is A = IΔΨ, where ΔΨ is the increment of the magnetic flux coupled with the loop. The loop tends to move or change its form in such a manner that the magnetic flux coupled with it acquires the greatest possible value. The flux is assumed to be positive if inside the loop it coincides in direction with the flux created by the current in the loop. In the case at hand the direction of the magnetic flux created by the current in the straight conductor and that of the magnetic flux created by the current in the loop coincide, and since the induction of the field created by the current in the straight conductor increases as we move closer to the conductor, this will lead to a certain displacement of the loop. The fact that the square loop transforms into a circle as the loop's area increases also leads to an increase in both the outer and inner magnetic fluxes.

Teacher's Note: Loop moves toward the wire and expands, so the flux linked with it becomes maximum.

Exam Note: Use A = IΔΨ: system moves to maximise flux.

Question 5.10. A conducting loop carrying a current is placed in a nonuniform magnetic field. How will it move as a result of the action of this field?

Solution. Both a torque and a force act on the loop. The direction of the torque is determined by the fact that the positive normal to the plane of the loop must point in the direction of the induction of the external field. The right-hand screw rule is used to determine the direction of this normal, which therefore coincides with the direction of the magnetic field of the loop proper. In accord with the direction of the current in the loop, the positive normal points upward. In the external field the loop turns counterclockwise, with the magnetic field generated by the current flowing in the loop coinciding in direction with the external magnetic field. The direction of the force acting on the loop is determined by the nature of the inhomogeneity of the external field. Since a loop carrying a current and placed in an external magnetic field moves in such a manner that the magnetic flux coupled with it attains the maximal possible value (in the algebraic sense), when the directions of the external and the intrinsic flux coincide, the motion occurs in the direction of the field with the higher induction, which in the case at hand means from left to right.

Teacher's Note: Loop first turns so its moment aligns with B, then moves toward stronger field.

Exam Note: Give both torque and force direction.

Question 5.11. A direct current (constant in magnitude and direction) flows in a contour made from soft wire. What shape does the contour tend to acquire as a result of the action of the magnetic field created by the current?

Solution. A similar question has been considered in Problem 5.9. Although in this case no external magnetic flux is present, the contour may influence the magnitude of self-induction flux coupled with it by changing its shape. Since the area and, hence, the flux through the contour are maximal when the contour is in the form of a circle, the magnetic forces acting on the contour tend to transform the contour in just this manner. We can arrive at the same conclusion by considering the interaction of two elements of the contour. The currents that flow in these elements tend to move the elements apart, since they flow in opposite directions. The collection of all such forces tends to stretch the contour.

Teacher's Note: Opposite-direction current elements repel, so the loop opens up to maximum area: a circle.

Exam Note: Answer: circle; give the maximum-flux argument.

Question 5.12. A small flat contour with a current flowing in it is placed successively at three points on the axis of a solenoid in which a current also flows in the same direction. The points are at the middle of the solenoid (point 1), at an end face (point 2), and outside the solenoid at a distance from an end face equal to one-half the length of the solenoid (point 3). The plane of the contour and the plane of the cross section of the solenoid are parallel. At which of these three points does the contour experience the greatest interaction with the solenoid and at which is the force minimal? Is the force attractive or repulsive at these points? The length of solenoid is considerably larger than the diameter.

Solution. The force acting on a contour carrying a current and placed in a nonuniform magnetic field with the directions of the lines of force of this field coinciding with those of the field generated by the current in the contour is F = pm dB/dr. In the case at hand, the force is determined by the values of the derivative dB/dr at different points of the field of the solenoid. The induction of the field of a solenoid of a finite length is given by the formula B = (μ0IN0/2)(sin α1 − sin α2). After simple transformations, the derivative dB/dr can be written as
dB/dr = (μ0IN0/2R){ 1/[1 + ((r + a)/R)2]3/2 − 1/[1 + ((r − a)/R)2]3/2 }.
This shows that dB/dr is nonpositive for r > 0. This means that the force acting on the contour is attractive (in the figure this force points from right to left). At r = 0 we have dB/dr = 0, with the result that at point 1 the force is zero. This also follows from the fact that point 1 in the middle of the solenoid is the equilibrium point of the contour positioned inside the solenoid. At point 2 (r = a),
dB/dr = (μ0IN0/2R)[1/(1 + 4a2/R2)3/2 − 1],
while at point 3 (r = 2a),
dB/dr = (μ0IN0/2R)[1/(1 + 9a2/R2)3/2 − 1/(1 + a2/R2)3/2].
Comparison shows that the numerical value of the derivative is greater at point 2 than at point 3. It can also be verified that at all points outside the solenoid the attractive force (if the direction of the current in the contour is the same as that of the current in the solenoid; if opposite, the force is repulsive) is smaller than at an end face of the solenoid, and decreases as the distance from the solenoid grows.

Teacher's Note: Force is p_m·dB/dr: zero mid-solenoid (B uniform), greatest at the end face, attractive.

Exam Note: Rank forces: end face greatest, middle zero.

Question 5.13. At a small distance from a solenoid carrying a current there is placed a contour with a current in such a manner that the solenoid's axis lies in the plane of the contour. The directions of the currents in solenoid and contour are shown by arrows. How does the contour move? How will it move if the direction of the current in it flows in the direction opposite to the one shown in the figure?

Solution. Initially the external magnetic flux coupled with the contour is zero. In tending to increase this flux, the contour moves in such a manner that (a) the magnetic moment associated with the contour aligns with the induction vector of the external field and (b) contour moves into the region of higher induction after the alignment is completed. Under the given directions of the currents, the induction generated by the solenoid is directed from right to left and the magnetic moment vector of the contour is directed upward. Thus, the contour rotates counterclockwise and moves toward the solenoid. If the direction of current in the contour is opposite to the one shown in the figure the problem, the contour rotates clockwise and also moves toward the solenoid.

Teacher's Note: Contour first rotates to align moment with B, then drifts into the stronger field.

Exam Note: State rotation sense and drift for both current directions.

Question 5.14. Between two fixed contours, 1 and 3, carrying currents that flow in the same direction there is suspended another contour, 2, that also carries a current. Contour 2 is oriented in such a manner that the forces caused by the currents in contours 1 and 3 are opposite in direction, equal in magnitude, and lie along a single straight line; thus, contour 2 is in equilibrium. Is this state of equilibrium stable or unstable? Consider the case where the current in contour 2 has the same direction as the currents in 1 and 3 and the case where the directions are opposite.

Solution. Contour 2 is in a nonuniform magnetic field. If the current in this contour flows in the same direction as the currents in contours 1 and 3, contour 2 is attracted to the other two contours. If it is deflected from the state of equilibrium in some direction, then from this direction there acts on it an attractive force that is greater than the other attractive force (since contour 2 is in a nonuniform magnetic field), and this means that it will move in that direction and will be drawn closer to the corresponding contour. If the current in contour 2 flows in the direction opposite to that of the currents in contours 1 and 3, then it might seem that contour 2 is in a state of stable equilibrium, since repulsive forces act from both directions. But there is another reason for instability. For an arbitrarily small rotation of contour 2 there appears a torque acting on this contour, and this torque tends to rotate the contour into such a position in which the direction of the current in contour 2 coincides with that of the currents in contours 1 and 3. When this process is completed, we again have to deal with the instability considered in the first case.
Analyzing the behavior of contour 2, we see that in both cases the instability manifests itself through a general rule, according to which a contour moves in an external field or changes its form in such a manner that the magnetic flux coupled with the contour acquires maximal value.

Teacher's Note: A displaced contour is pulled to the nearer one; in the opposite case torque flips it first.

Exam Note: Equilibrium unstable in both cases; give both arguments.

Question 5.15. Two contours whose planes are parallel to each other and are separated by a certain distance carry currents that flow in the same direction. One contour is left fixed while the other is positioned in a different manner with respect to the first: in one case its plane is turned by 90°, in the other by 180°, while in the third case it is just moved parallel to itself over a certain distance. In which of these three cases one will have to perform the greatest work and in which, the smallest?

Solution. The work performed in moving a contour carrying a current is equal to A = I(Ψ2 − Ψ1). If the flux coupled with the contour whose position is changed is initially Ψ1, then upon rotating the plane of the contour by 180° this flux becomes −Ψ1, upon rotating the plane by 90° it drops to zero, and upon moving the contour whose position is changed away from the fixed contour the flux decreases but does not become zero. The work of the forces of interaction is therefore: for the 90° turn A = −IΨ1; for the 180° turn A = −2IΨ1; for the parallel shift A = −I(Ψ1 − Ψ2), where Ψ2 is the flux coupled with the contour upon moving the mobile contour away from the fixed contour. The minus that is present in each formula shows that the work must be done against the interaction of the contours.
Corrected: the book lists the first two results in the opposite order to the problem (it calls the 180° result "first"); worked in the order of the problem as above. Conclusion: the greatest work (2IΨ1) is needed for the 180° turn; the smallest, I(Ψ1 − Ψ2), for the parallel displacement.

Teacher's Note: Work against the interaction is I·ΔΨ: 180° turn flips flux to −Ψ₁ (largest); small shift changes least.

Exam Note: Compare flux changes: 180°, then 90°, then shift.

Question 5.16. In a uniform magnetic field there are two charged particles moving with velocities v1 and v2 and carrying equal charges, with |v1| = |v2| = v. The velocity of one particle forms an angle α1 with the direction of the field, while the other velocity forms an angle α2. In what parameters does the motion of one particle differ from that of the other? Determine which of the parameters is greater for which particle.

Solution. The velocity of each particle may be decomposed into two components, one pointing along the induction vector, and the other at right angles to the induction vector. The component directed along the field does not change since the Lorentz force affects only the component that is perpendicular to the field. If we denote this latter component by v⊥ the Lorentz force is F = ev⊥B (5.16.1). This force, which is perpendicular both to the velocity of a charged particle and to the induction vector, imparts a normal acceleration to the particle in question, with the equation of motion of the particle in the direction perpendicular to the field being mv⊥2/R = ev⊥B (5.16.2). Combining (5.16.1) with (5.16.2), we can determine the radius of the circle along which the particle moves and the time it takes the particle to complete one circle (which does not depend on the velocity). In the course of the same time interval, T, the particle also moves along the field by a distance h = v||T, where v|| is the component of the velocity along the field. The result is the motion of the particle along a helical line with radius R and lead h. Since for an initial velocity v and an angle α the longitudinal component of the velocity is v|| = v cos α and the transverse component is v⊥ = v sin α, the trajectory of the particle with the larger angle α has a greater radius and a smaller lead of the helical line.

Teacher's Note: Both move on helices with equal period; R = mv sinα/(eB) and lead h = v cosα·T differ.

Exam Note: Larger angle: larger radius, smaller pitch; period same.

Question 5.17. The device shown in Figure (a) is commonly used to measure the charge-to-mass ratio of the electron. The electrons that leave the cathode C are accelerated by an electric field that exists in the space between the cathode and the anode A. A fraction of electrons fly through the hole in the anode. These electrons, leaving region I of the device, fly into the region where there is no electric field. In this region the electrons are deflected from a straight line via a magnetic field directed perpendicularly to the plane of the drawing. This field is generated by two solenoids. The region II where the trajectory of the electrons is bent lies between these two solenoids. By increasing the current flowing through the two solenoids connected in series we can direct the electrons into a Faraday cylinder F, with a galvanometer G registering the resultant current. Any further increase in the solenoid current results in a drop in the current flowing through G, since the electrons begin to move along a circle of a smaller radius. The dependence of the galvanometer current on the solenoid current is illustrated by the curve in Figure (b). The following quantities are known in measurements: the potential difference U between anode and cathode, the curvature radius R of the axial line of region II (assuming that the majority of electrons deflected by the magnetic field travel along this line), the number of turns N0 per unit length of solenoid, and the current I at which the galvanometer current is maximal. How to determine the charge-to-mass ratio of the electron knowing the values of these quantities?

Solution. An electron accelerated by a potential difference U acquires kinetic energy mv2/2 = eU (5.17.1). The force acting on the electron in a magnetic field is the Lorentz force F = evB, which makes the electron move along a circular arc whose radius is R, so that, according to Newton's second law, mv2/R = evB (5.17.2). The induction of the magnetic field generated by the current in the solenoid is B = μ0IN0 (5.17.3). Excluding velocity v from Eqs. (5.17.1) and (5.17.2) and substituting the value of B from (5.17.3), we find the sought-for charge-to-mass ratio:
e/m = 2U / (μ02I2N02R2).

Teacher's Note: Combine eU = mv²/2 with mv²/R = evB and B = μ₀N₀I; eliminate v.

Exam Note: Final: e/m = 2U/(μ₀²I²N₀²R²); show elimination.

Question 5.18. A charged particle of mass m and charge Q has acquired a certain velocity by passing through a potential difference U0. With this velocity it flies into the field of a parallel-plate capacitor, with the distance between the plates being l, the potential difference being U. The velocity of the particle is directed parallel to the plates. Where should the magnetic field that makes the particle move along a straight line in the capacitor be directed and what should its value be (the induction B)?

Solution. The electric field vector inside the capacitor is directed at right angles to the capacitor plates. The force Fe = QE = QU/l with which the electric field acts on the particle is directed in the same manner. A force equal in magnitude to Fe but pointing in the opposite direction acts on the particle from the magnetic field. According to the Lorentz formula, this force is Fm = QvB and is directed at right angles to the velocity of the particle and the magnetic induction vector. This means that the induction vector must be perpendicular to the electric field (and to the velocity, i.e. perpendicular to the plane containing E and v). As we have said earlier, the two forces must be equal: QU/l = QvB, or B = U/(vl) (5.18.1). The velocity the particle acquired in an electric field can be found by employing the energy conservation law: mv2/2 = QU0. Solving this for v and substituting the result into (5.18.1), we finally obtain
B = (U/l)·√(m/(2QU0)).

Teacher's Note: Straight path needs QE = QvB, with B perpendicular to both E and v; v from QU₀ = mv²/2.

Exam Note: Equate electric and magnetic forces, then substitute v.

Question 5.19. A direct current I is flowing through a plane in the direction designated by an arrow. The plate is placed in a transverse magnetic field B. As a result of the Hall effect there appears a transverse potential difference. What is the sign of the potential at point a if the plate is made of metal and what is the sign if the plate is an n-type or p-type semiconductor?

Solution. According to the Lorentz formula, charges moving in a magnetic field are subjected to a force whose direction is determined via the left-hand rule, where the positive direction of a current is defined in the "electrical-engineering" sense, that is, the direction in which the positive charges move in the conductor. Therefore, irrespective of the sign of the charge carriers, the forces acting on these carriers point in the same direction. In the case illustrated in the figure accompanying the problem, the charges move downward. In a metal or an n-type semiconductor, where electrons are the charge carriers, this will result in a depletion of charge carriers in the region about point a; the region will acquire a positive potential. In the case of a p-type semiconductor the sign of the charge is obviously minus.

Teacher's Note: Force direction is independent of carrier sign; electrons leave point a, so a is positive in metal or n-type.

Exam Note: Metal and n-type: a positive; p-type: a negative.

Question 5.20. Two contours are positioned in such a manner that their planes are parallel to each other. Contour 1 carries a current whose direction is designated by an arrow. The contours move in relation to one another, but their planes remain parallel in the process. What is the direction of the current induced in contour 2 when the contours are moved toward or away from each other?

Solution. According to Lenz's law, the induced current is in such a direction as to oppose the change in the magnetic field that produces it (that is, oppose the change in magnetic flux coupled with the contour). When the two contours approach each other, the flux coupled with the second contour increases, which means that the direction of the induction current in that contour is opposite to the current in the contour. On the other hand, when the contours are moved away from each other, the decrease in the flux in contour 2 leads to an induction current in that contour that is directed in same sense as in contour 1.

Teacher's Note: Lenz's law: approaching raises flux, so induced current opposes I₁; receding gives same sense as I₁.

Exam Note: Name both cases: approach opposite, recede same direction.

Question 5.21. A spiral made from elastic wire is connected to a DC source. The spiral is stretched. Will the current flowing in the spiral become greater or smaller in the stretching process than the initial current or will it remain unchanged?

Solution. The induction emf is εi = −d(LI)/dt = −L dI/dt − I dL/dt. In the case at hand the variable quantity is the inductance. When the spiral is stretched, the inductance falls, so that dL/dt < 0 and εi > 0. The generated induction emf leads to an increase in the current in the circuit. For an exact calculation one is forced to solve the equation I = (ε0 − L dI/dt − I dL/dt)/R, which requires knowing the time dependence of the inductance, L = L(t).

Teacher's Note: Stretching lowers L, so −I·dL/dt is positive and adds to the source emf; current rises.

Exam Note: Answer: greater; justify with −I dL/dt term.

Question 5.22. A solenoid carrying a current supplied by a DC source with a constant emf contains an iron core inside it. How will the current change when the core is pulled out of the solenoid: will it increase, decrease, or remain the same?

Solution. Since removal of the iron core results in a decrease in the induction and the magnetic field flux of the solenoid, during removal there emerges a self-induction emf, which opposes the reduction in the flux and, hence, increases the current flowing in the solenoid (the direction of the external emf, which supplies DC power to the solenoid, and that of the self-induction emf are the same).

Teacher's Note: Removing the core cuts flux; Lenz's law makes the induced emf aid the source, raising current.

Exam Note: Answer: current increases temporarily; cite Lenz's law.

Question 5.23. Two identical inductances carry currents that vary with time according to linear laws (Fig. 5.23, lines 1 and 2). In which of the two inductances is the self-induction emf greater? Will the values or signs of the self-induction emf's change if the currents begin to increase in the opposite direction after they pass through zero (with the linear laws retained in the process)?

Solution. The self-induction emf defined by the formula εs.i. = −L(dI/dt) is proportional to the derivative dI/dt (for equal inductances), which is the greater the steeper the straight line. Hence, the self-induction emf is higher for the inductance for which the time dependence of the current is depicted by straight line 1. Since the slopes of the straight lines do not change when the currents pass through zero, both the numerical values and the directions of the self-induction emf's are retained.

Teacher's Note: EMF depends on slope dI/dt, not on current value, so passing through zero changes nothing.

Exam Note: Steeper line gives larger emf; emf unchanged after zero.

Question 5.24. A current that varies with time according to a law depicted graphically in the figure passes through an induction coil. In which of the moments denoted in the figure will the self-induction emf be maximal (the inductance of the coil remains unchanged in the process)?

Solution. The self-induction emf defined by the formula εs.i. = −L dI/dt has its maximal value, obviously, at the point where the rate of decrease of current is greatest, that is, at point 3.

Teacher's Note: Maximum |emf| is at the steepest slope of I(t); here the fastest decrease, at point 3.

Exam Note: Read the steepest slope on the graph, not the peak.

Question 5.25. Various circuits are used to observe the phenomenon of self-induction. Among these are the circuits shown in Figures (a) and (b). In Figure (a), key K is initially opened and the current flows through the induction coil L and resistor R connected in series. In Figure (b), key K is initially closed and the current branches off to R and L. In both circuits the resistance of the coil L is much lower than R. Can an induction emf be generated in either one of these circuits that is higher than the emf of the DC source?

Solution. In Figure (a), after key K is closed, the current flowing through the circuit that consists of L and R connected in series is initially the same as the current that was flowing before K was closed. For this circuit we can write Kirchhoff's law in the form −L dI/dt = RI. Separation of variables and subsequent integration yield I = I0 exp(−Rt/L). The current falls off according to an exponential law, with the self-induction emf being initially εs.i. = −L dI/dt = I0R, which means that the self-induction emf is equal to the emf of the DC source.
In Figure (b), after key K is opened, the current initially is the same as the one that was flowing in the circuit before K was opened. In this case, however, the resistor R closes the circuit. Since prior to opening the key the current flowing in the resistor was much weaker than that flowing in the induction coil, the voltage across the resistor after K is opened may initially become considerably higher than that prior to opening the key, which is possible only if R is considerably higher than the resistance of the DC source. One must bear in mind also that after opening the key the current in the resistor will reverse its direction.

Teacher's Note: Circuit (a) limits emf to the source value; in (b) the stored coil current flows through large R.

Exam Note: Only circuit (b) can exceed the source emf.

Question 5.26. When a certain circuit consisting of a constant emf, an inductance, and a resistance is closed, the current in it increases with time according to curve 1 (see the figure accompanying the problem). After one parameter (ε, L, or R) is changed, the increase in current follows curve 2 when the circuit is closed a second time. Which parameter was changed and in what direction?

Solution. The increase in current in the circuit with a resistance and an inductance occurs according to the law I = (ε/R)[1 − e−(R/L)t] (5.26.1). Since by hypothesis only one parameter can vary, the parameter may be only the inductance because conservation of the limiting current is possible only when two parameters, ε and R, are varied simultaneously. Formula (5.26.1) implies that the increase in current is the slower the higher the inductance in the circuit. Hence, curve 2 corresponds to a higher inductance.

Teacher's Note: Same final current ε/R means ε and R unchanged; only the time constant L/R changed.

Exam Note: Inductance was increased; slower rise, same limit.

Question 5.27. A current is flowing in a circular contour 1 whose radius is R. A second contour, 2, whose radius is much smaller than that of the first, is moving with a constant velocity v along the r axis in such a manner that the planes of the contours remain parallel to each other in the course of the motion. At what distance from contour 1 will the emf induced in contour 2 be maximal?

Solution. The magnetic flux coupled with contour 2 is Ψ = BS, where S is the area of the contour, and B is the magnetic induction at the point where the contour has been placed. Accordingly, the induction emf generated in the contour is ε1 = −S dB/dt = −S (dB/dr)(dr/dt) = −Sv dB/dr. The induction of the magnetic field generated by the current flowing in a circular contour and measured at a certain distance from the contour on the contour's axis is given by the formula B = μ0pm / (2π(R2 + r2)3/2), where pm is the magnetic moment of the contour. Therefore, the induction emf in contour 2 is ε1 = (3μ0pmSv/2π)·r/(R2 + r2)5/2 = C r/(R2 + r2)5/2, with C = 3μ0pmSv/2π. The sign of r determines the sign of the induced emf; when contour 2 is moved closer to contour 1, r is negative and so is the induced emf, so that the direction of the current in contour 2 is opposite to that of the current in contour 1. When contour 2 passes through contour 1, the induced emf changes sign. The maximal value of this emf can be obtained by nullifying the derivative,
dε1/dr = C [(R2 + r2)5/2 − (5/2)(R2 + r2)3/2·2r2] / (R2 + r2)5 = 0.
Thus an emf is maximal at r = R/2. An emf of equal magnitude but of opposite sign is generated at the same distance but on the other side when the contours are brought together.

Teacher's Note: Emf ∝ r/(R²+r²)^(5/2); setting its derivative to zero gives R² = 4r².

Exam Note: Answer r = R/2; show the derivative condition.

Question 5.28. A certain circuit consists of a DC source with emf ε, an induction coil L1, and a key K1. No resistance is present in the circuit. Another coil, L2, which is connected electrically to a resistor R through a key K2, is fastened to L1. At some moment in time key K1 is closed. After a certain time interval K2 is closed. How do the current in the primary circuit (the one containing ε), the induction emf in the secondary circuit (the one with L2 and R), and the current in the secondary circuit vary with time?

Solution. When key K1 is closed, a closed circuit consisting of a DC source and the induction coil L1 is formed. Since there is no resistance in this circuit, the sum of the emf's is zero: ε − L1 dI1/dt = 0. The fact that ε and L1 are constant requires that dI1/dt be constant, too. Thus, a current linearly increasing with time will flow in the circuit (the solid line in Fig. (a)). The magnetic flux generated by this current is coupled with both coils and also linearly increases with time: Ψ = L1I1. In the second coil there appears a constant emf (Fig. (b)) whose direction is opposite to that of the current in L1: ε2 = −dΨ/dt = −L1 dI1/dt = −L2 dI1/dt (as printed). The current in the first coil increases with a constant time-rate as long as K2 is open. When K2 is closed, a current flows in L2, with the magnetic field generated by this current opposing the field generated by the current in L1. The fact that the instantaneous value of the flux coupled with both coils must be preserved requires that there be a jump in the current in L1, after which the current will continue to grow according to the same linear law (the dashed broken line in Figure (a)). The current in L2 will remain constant during the entire process (Figure (c) accompanying the answer).

Teacher's Note: With no resistance, ε = L₁dI₁/dt gives linear I₁; the secondary sees constant emf −M·dI₁/dt.

Exam Note: I₁ rises linearly with a jump at K2; emf constant.

Question 5.29. An infinitely long straight conductor and a flat rectangular contour with sides a and b and with N turns lie in a single plane. The distance between the straight conductor and the side of the contour closest to the straight conductor is c. Determine the following quantities: (1) the mutual inductance of the conductor and the contour; (2) the quantity of electricity induced in the contour if the contour is rotated through 90° about the AB axis provided that a current I is flowing in the contour and the resistance of the contour is R; (3) the work that must be done to rotate the contour through 180° about the AB axis provided that there is current I both in the long conductor and in the contour and that the sense of the current in the contour is clockwise (in the plane of the drawing).

Solution. (1) To find the mutual inductance we determine the magnetic flux coupled with the contour and generated by current I flowing in the straight conductor. In this case the mutual inductance is determined from the equation M = Ψ/I. The induction at a distance x from the straight conductor is B = μ0μI/2πx. The flux through a part of the contour dx wide and b high is dΦ = (μ0μ/2π)(I/x) b dx, and through the entire contour Φ = (μ0μ/2π) Ib ∫cc+a dx/x = (μ0μ/2π) Ib ln((c + a)/c). When there are N turns in the contour, the flux coupled with the contour is Ψ = NΦ = (μ0μ/2π) INb ln((c + a)/c), which implies that the mutual inductance is
M = (μ0μ/2π) bN ln((c + a)/c).
(2) Since the rotation of the contour through 90° makes the flux coupled with the contour vanish, the amount of electricity induced in the contour as a result of such a rotation is determined by the formula
Q = Ψ/R = (μ0μb NI/(2πR)) ln((c + a)/c).
(3) The rotation of the contour through 180° requires the following work to be done: A = −2ΨI = −(μ0μI2Nb/π) ln((c + a)/c).
Corrected: the minus sign in the printed A = −2ΨI is the work done by the field forces (flux changes from Ψ to −Ψ). The external work that must be done is positive: A = 2ΨI = (μ0μI2Nb/π) ln((c + a)/c).

Teacher's Note: Flux through a strip dx is (μ₀μI/2πx)b dx; integrate from c to c+a, multiply by N.

Exam Note: Flux integral gives ln((c+a)/c); Q=Ψ/R; 180° work is 2ΨI.

Question 5.30. A common device used in electrical measurements is the so-called Rogowski loop. It constitutes a flexible solenoid that can be transformed into a torus if the two ends are brought together (Figure (a)). The leads can be connected to an AC ammeter, a ballistic galvanometer, or an oscillograph. By circling a conductor with a Rogowski loop one can measure an alternating current flowing constantly in the conductor or even isolated changes in the current, such as those that occur when the current is switched on or off or when pulses pass through the circuit. Suppose the Rogowski loop forms a toroid that encircles a conductor carrying a direct current I (Figure (b)). The parameters of the loop are as follows: the cross-sectional area is S, the number of turns is N, the resistance of the winding is R, and the radius of the toroid is r. It is assumed that the width d of the loop proper is very small compared to r. At a certain moment the current is switched off; the current becomes zero in a very short interval. The ballistic galvanometer in the circuit of the loop measures the quantity of electricity Q that has passed through the loop (and the galvanometer). How can one find the current I that was flowing in the conductor prior to switch-off knowing the values of the above-mentioned parameters?

Solution. When a current flows in a conductor, the induction of the magnetic field generated by this current at a distance r from the conductor is B = μ0I/2πr. The magnetic flux coupled with the contour formed by the winding of the loop is Ψ = BSN, or Ψ = μ0ISN/2πr. When the current drops to zero, the flux follows it, and the amount of electricity flowing in the contour is determined by the formula Q = ΔΨ/R. Hence, the current that had been flowing in the conductor prior to switch-off is
I = 2πrRQ/(μ0SN).

Teacher's Note: Flux linkage Ψ = μ₀ISN/(2πr) falls to zero; charge Q = ΔΨ/R gives I.

Exam Note: Use Q = ΔΨ/R; state I = 2πrRQ/(μ₀SN).

Question 5.31. A flat coil with a cross-sectional area S and with N turns is placed in a magnetic field. The leads of the coil are connected to an oscillograph. When the coil is moved out of the field, an induction emf is generated in it, and the oscillogram of this emf is shown in the figure. How do the maximal value of the emf, εi m, and the area under the curve depend on the rate with which the coil is moved out of the field?

Solution. The following emf is induced in the coil: εi = −dΨ/dt (5.31.1). We see that the maximal possible value of εi is the higher the greater the rate with which the coil is moved out of the field. The area under the curve is given by the integral ∫0t εi dt = −∫Ψ1Ψ2 dΨ = Ψ1 − Ψ2 = Ψ1 = BSN and, hence, is independent of the rate of coil removal from the region with the field.

Teacher's Note: Peak emf grows with speed, but ∫ε dt equals total flux change BSN regardless of speed.

Exam Note: Peak depends on rate; area under curve does not.

Question 5.32. Suppose that we have two solenoids of the same length. Their diameters differ only to the extent to which one can be fitted onto the other. The inductances of the two solenoids can be considered the same and equal to L. Here are the ways in which the solenoids can be connected: (1) the solenoids are connected in series and are separated by a large distance; (2) the solenoids are connected in parallel and are separated by a large distance; (3) the solenoids are connected in series, one is fitted onto the other, and the senses of the turns coincide; (4) the solenoids are connected in parallel, one is fitted onto the other, and the senses of the turns coincide; (5) the solenoids are connected in series, one is fitted onto the other, and the senses of the turns are opposite; (6) the solenoids are connected in parallel, one is fitted onto the other, and the senses are opposite. Determine the total inductance for each of the above cases.

Solution. (1) The system can be considered as being a new solenoid whose length is twice as large as that of one solenoid, with a density of turns the same as that in one solenoid and with the same cross-sectional area. Since the inductance of one solenoid is L = μ0N0V, where N0 is the number of turns per unit length, and V is the solenoid volume, which in this case is twice the volume of one solenoid, we have L1 = 2L0. The same result can be achieved by considering the self-induction emf that is generated in the two solenoids connected in series. The total emf is equal to the sum of the emf's generated in each solenoid; hence, ε1 = −2L0 dI/dt, which yields L1 = 2L0.
(2) When the solenoids are connected in parallel, the self-induction emf in each solenoid is ε1 = −L0 d(I/2)/dt = −(1/2)L0 dI/dt. Because the solenoids are connected in parallel, the total emf has the same value. Thus, with a current I in a circuit that is external with respect to the solenoid, the induced emf is one-half the value for the inductance L0. Hence, L2 = (1/2)L0.
(3) In this case, the number of turns per unit length is twice as large as that of one solenoid, and since the inductance is proportional to N02, we have (provided that the current remains unchanged) L3 = 4L0.
(4) If one solenoid is fitted onto the other and the senses of the turns coincide and the solenoids are connected in parallel, the current through each solenoid is I/2 if the current in the circuit is I, while the flux associated with current I/2 is Φ/2. The total flux is Φ and the flux coupled with each solenoid is Ψ = ΦN0. In each solenoid there is generated a self-induction emf equal to the one induced in a separate solenoid when current I varies. Since the solenoids are connected in parallel, this emf is the common emf of both solenoids. Hence, L4 = L0.
(5, 6) In both cases the induction flux in the solenoids is zero, so that L5 = L6 = 0.

Teacher's Note: Aiding windings share flux (series 4L, parallel L); opposing windings cancel flux, giving zero.

Exam Note: Answers: 2L, L/2, 4L, L, 0, 0.

Question 5.33. The current flowing in a certain inductance coil varies in time according to the curve shown schematically in the figure (Fig. 5.33). Draw the curve representing the induced emf as a function of time (also schematically).

Solution. The induced emf is εi = −L dI/dt. Hence, the value of the emf is determined by the rate with which the current decreases (the sign of this rate is opposite to dI/dt). The slope of the straight line on the 0-1 section is twice as large as that of the straight line on the 1-2 section and coincides (numerically) with the slopes of the straight lines on sections 3-4-5 and 5-6. Hence, in the time interval between points 1 and 2 the induced emf is one-half of the emf's in the other intervals except the interval from point 2 to point 3 where εi = 0 (I = const). The resulting curve is drawn below (schematic, in units of the emf on section 0-1; the emf is negative where the current rises and positive where it falls).

εᵢt123456

Teacher's Note: Emf = −L·dI/dt: constant on each straight section, so a staircase; half-size on 1–2, zero on 2–3.

Exam Note: Plot −L dI/dt section by section; mark zero on 2–3.

Question 5.34. Two similar parallel electron beams point in the same direction. The linear dimensions of the cross section of each beam are small compared to the distance between the beams. Suppose that v is the electron velocity and n is the electron concentration in either beam. In a coordinate system with respect to which the electrons are in motion there are two types of interactions, the electrostatic and the magnetic. Which of the two is greater in magnitude?

Solution. In each beam we isolate an element of length l. On the one hand, the element can be thought of as a charge Q = enSl, or, on the other, as an element of current I = envS. An electrostatic repulsive force Fe = EQ acts on each charge element, where E can be assumed to be the electric field generated by an infinitely long straight conductor carrying a charge whose linear density is τ = enS. This field, which acts on the charges in the second beam, can be written in the form E = enS/(2πε0r), so that Fe = e2n2S2l/(2πε0r). The isolated element, if considered as an element of current, is under a force Fm = BIl, where B is the induction generated by the other current: B = μ0 envS/(2πr). Thus Fm = μ0 e2n2v2S2l/(2πr). The ratio of these two forces is Fm/Fe = v2ε0μ0. Since ε0μ0 = 1/c2, where c is the speed of light in vacuo, we obtain
Fm/Fe = v2/c2.
Since v < c, the electrostatic interaction is the greater.

Teacher's Note: Electric repulsion ∝ 1/ε₀, magnetic attraction ∝ μ₀v²; ratio v²/c² is always below 1.

Exam Note: Answer: electrostatic larger; ratio F_m/F_e = v²/c².

Question 5.35. Electric charges do not generate magnetic field in a system of coordinates (better to say, frame of reference) where they are at rest. The magnetic field that surrounds a conductor carrying a current is generated by the charges that are moving in the conductor. Since the electron concentration in a conductor is of the order of 1022 cm−3, the directional velocity of the electrons in the conductor is of the order of one millimeter per second (if the current density is estimated at 100 A/cm2). We position the conductor carrying the current in such a manner that it follows the magnetic meridian at the point where the conductor is present. Just as in Oersted's experiment, a magnetic compass needle placed under the conductor will be deflected. If the needle is moved along the conductor with a speed equal to the directional velocity of the electrons in the conductor (i.e. of the order of several millimeters per second), the electron will be at rest in relation to the needle and, since the magnetic field in the system connected with the needle must be nil, the needle will not be deflected. More than that, if the needle is moved along the conductor with a speed greater than that of the electrons, the needle will be deflected in the opposite direction. Are these assertions correct?

Solution. The reasoning is all wrong. Even if the electrons in the conductors are at rest in relation to the needle, the positive ions that are moving in this case in the opposite direction create, obviously, a magnetic field equal to the one generated by the moving electrons when the needle was at rest. If the electrons are moving in a vacuum, then the electrodes and the electric field move in the opposite direction (when the needle is at rest in relation to the electrons).

Teacher's Note: In the needle's frame the positive ions move backwards and give the same magnetic field.

Exam Note: Answer: assertions wrong; ions carry the current.

Question 5.36. How are the magnetic induction vector and the magnetic field vector directed inside and outside a bar magnet?

Solution. The permeability of air is practically unity and at any point the magnetic field vector coincides in direction with the magnetic induction vector. In the emu system of units both vectors coincide in magnitude as well, while in the SI system they are related thus: H = B/μ0. Since the lines of force of induction are continuous, inside a bar magnet they are directed from the south pole to the north pole and are continued outside the magnet by lines directed from the north pole to the south pole. To determine the direction of the magnetic field inside the magnet, one must bear in mind that the circulation integral of the magnetic field vector along a closed contour must be equal to the algebraic sum of the currents encompassed by the contour. Since in the case at hand there are no currents, the circulation integral along any contour lying inside the magnet must be zero. If the contour passes partially through the air surrounding the magnet and partially in the magnet, the circulation integral may be equal to zero only if inside the magnet the magnetic field vector is directed from the north pole to the south pole. Formally this means that inside the magnet the permeability is negative.

Teacher's Note: B lines are closed (S→N inside); H must integrate to zero around any contour, so H points N→S inside.

Exam Note: B: S to N inside; H: N to S inside.

Question 5.37. Two types of steel are characterized by the hysteresis loops shown in Figure (a) and (b). The loops are obtained in the processes of magnetization and demagnetization of the steels. Which of the two types is best suited for using as the core of a transformer and which, for using as a permanent magnet?

Solution. Alternating magnetization results in liberation of heat in the steels, with the amount of heat proportional to the area bounded by the hysteresis loop. Since a transformer operates on alternating currents, the amount of heat liberated in the core of a transformer will be the greater the bigger the area bounded by the loop. From this fact one can conclude that the steel whose hysteresis loop is depicted in Figure (b) accompanying the problem is more desirable. On the other hand, it is desirable that a permanent magnet have as high a residual magnetic induction and a coercive force as possible. This implies that the steel more suitable for manufacturing a permanent magnet is the one whose hysteresis loop is depicted in Figure (a).

Teacher's Note: Hysteresis loss per cycle is proportional to loop area; magnets need large remanence and coercivity.

Exam Note: Transformer: narrow loop (b); permanent magnet: wide loop (a).

Question 5.38. How can one use the B vs. H graph (the magnetization curve) to determine the work that a source of current must perform to magnetize a ferromagnetic core of a solenoid whose length is l and whose cross-sectional area is S? The magnetization curve is shown in the figure accompanying the problem.

Solution. The elementary work involved in changing the magnetic flux coupled with a contour carrying a current I is dA = I dΨ, or dA = ISN dB. If we use the relationship that exists between the current in a solenoid and the magnetic field generated by this current, H = IN/l, we obtain dA = H Sl dB = VH dB, where V is the volume of the core. The entire work is
A = V ∫0B H dB.
The integral on the right-hand side is the area bounded by the B vs. H curve, the ordinate, and the segment of a straight line parallel to the H axis (see the figure accompanying the answer).

Teacher's Note: dA = V·H·dB, so the work is core volume times the area between the B–H curve and the B axis.

Exam Note: Work = V × area left of curve; V = Sl.

Question 5.39. Does a hysteresis loop possess sections in which we can formally assign to permeability a value that is zero or infinite or negative?

Solution. As shown in the answer to Problem 5.36, the magnetic field inside a permanent magnet is directed from the north pole to the south pole, while the induction is directed from the south pole to the north pole, with the result that these quantities have opposite signs. On the hysteresis loop, this condition is met on sections 2-3 and 5-6 (see the figure accompanying the problem). Formally, to the permeability on these sections we can assign a negative value. Correspondingly, to point 0 we may assign a permeability equal to ±∞, while points 3 and 6 correspond to zero values of the permeability.

Teacher's Note: μ = B/(μ₀H): opposite signs of B and H give μ<0; B=0 gives 0; H=0 gives ∞.

Exam Note: Yes: μ negative, zero, infinite at those points.

Question 5.40. A straight conductor passes through a ferromagnetic toroid, as shown in the figure accompanying the problem. The conductor carries a current that first grows to a certain maximal value and then falls off to zero, as a result of this the toroid becomes magnetized. Indicate the directions of the lines of force for magnetic induction in the toroid and find the sections or points on the hysteresis loop corresponding to the state of the toroid after the current has ceased to flow (see the figure accompanying Problem 5.39).

Solution. After the current in the conductor has ceased, the circulation integral of the magnetic field strength along any closed contour is zero (this is true even for a closed contour that passes in the toroid). Since all points of a contour that is a circle concentric with the section of the conductor are identical, the magnetic field strength at all points inside the toroid is zero, too. At the same time, the toroid carries a residual magnetic induction whose lines of force are circles directed in the manner shown by the arrow in the figure accompanying the answer. This magnetic state of the toroid corresponds to point 2 or 5 on the hysteresis loop (the choice of the point depends on which of the two directions is assumed to be positive). If the positive direction of the magnetic field vector is the one the toroid acquires during magnetization, this state of the toroid is depicted by point 2.

Teacher's Note: No current gives H = 0 by the circulation theorem, yet remanent B persists: a point on the B axis.

Exam Note: State H = 0, B residual; points 2 or 5.

Question 5.41. Suppose we wish to calculate the circulation integrals of the magnetic field strength and magnetic induction along various contours, some of which lie entirely in a vacuum while the other partially overlap a medium with a permeability μ. The "x" inside a small circle marks the section of a conductor carrying a current by the plane of the drawing. Are all the circulation integrals of the magnetic induction equal to each other? Is this also true of the circulation integrals of the magnetic field strength?

Solution. The circulation integral of the magnetic field is uniquely determined by the current flowing inside the contour. Because of this, the circulation integrals along contours 1, 4 and 5 (see the figure accompanying the problem) are the same and equal to the current I, while the circulation integrals along contours 2 and 3 are zero. However, the situation with the circulation integrals of the magnetic induction along these contours is quite different. When the circulation integrals are evaluated along contours that pass through a homogeneous medium (in the case at hand, in a vacuum), they do not depend on the shape and size of the contours, with the result that the circulation integrals along contours 4 and 5 are equal. Reasoning in the same manner, we conclude that the circulation integral along contour 3 is zero. But in evaluating the circulation integrals along contours 1 and 2 that include sections of a medium with a permeability greater than unity, the circulation elements in this medium are μ times greater than in the vacuum (if μ is greater than unity). For this reason the circulation integral along contour 1 is greater than that along contours 4 and 5, while the circulation integral along contour 2 is nonzero.

Teacher's Note: ∮H·dl = enclosed current regardless of medium, but B = μμ₀H, so B circulation differs in the medium.

Exam Note: H circulations follow enclosed current; B circulations do not.

Download LA Sena Solutions for JEE Math PDF

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The LA Sena Solutions Physics Chapter 5 Electromagnetism PDF provides comprehensive answers mapped to standard LA Sena Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these LA Sena Solutions for JEE Physics?

They are chapter-wise solved questions from the LA Sena book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the LA Sena JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these LA Sena solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising LA Sena JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.