Solutions for Class 10 Mathematics: Chapter 14 Surface Areas And Volumes
Review structured textbook solutions for Class 10 Mathematics Chapter 14 Surface Areas And Volumes prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 10 Mathematics Solutions: Chapter 14 Surface Areas And Volumes
View or download the dedicated Chapter 14 Surface Areas And Volumes solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Mathematics.
KC Sinha Class 10 Maths Chapter 14 Surface Areas And Volumes - Part 2
Exercise 14.2
Question 17. The inner diameter of glass is 7cm, and it has a raise portion in the bottom in the shape of a hemisphere as shown in the figure. If the height of the glass is 16 cm, find the apparent capacity and the actual capacity of the glass. [Take π = 22/7] (Figure: a cylindrical glass with a hemispherical raised portion at the bottom.)
Solution. Radius of the glass r = 7/2 = 3.5 cm, height = 16 cm.
Volume of the cylindrical glass = πr²h = (22/7) × (7/2) × (7/2) × 16 = 616 cm³.
Radius of the hemisphere = r = 3.5 cm, so its volume = (2/3)πr³ = (2/3) × (22/7) × 3.5 × 3.5 × 3.5 = 89.83 cm³.
Apparent capacity of the glass = volume of cylinder = 616 cm³.
Actual capacity = 616 − 89.83 = 526.17 cm³.
Hence, apparent capacity = 616 cm³ and actual capacity = 526.17 cm³.
Teacher's Note: The raised hemisphere takes up space, so actual capacity is less than apparent capacity.
Exam Note: Subtract hemisphere volume; state both capacities with units.
Exercise 14.3
Question 1. Two cylindrical vessels are filled with oil. The radius of one vessel is 15 cm and its height is 25 cm. The radius and height of the other vessel are 10cm and 18 cm respectively. Find the radius of a cylindrical vessel 30 cm in height, which will just contain the oil of two given vessels.
Solution. Volume of 1st vessel = πr²h = π × 15² × 25 = 5625π cm³.
Volume of 2nd vessel = π × 10² × 18 = 1800π cm³.
Let the radius of the third vessel be R; its volume = πR² × 30 = 30πR².
5625π + 1800π = 30πR² ⇒ 7425π = 30πR² ⇒ R² = 7425/30 = 247.5 ⇒ R = 15.73 cm.
Hence, the radius of the required cylinder is 15.73 cm.
Teacher's Note: Oil is conserved: add the two volumes and equate to the new cylinder; π cancels.
Exam Note: Write volume equation first; round the root to two decimals.
Question 2. A metal cube of edge 12 cm is melted and formed into three smaller cubes. If the edges of two smaller cubes are 6 cm and 8 cm, find the edge of the third smaller cube (Assume that there is no loss of metal during melting)
Solution. Let the edge of the third smaller cube be x cm. Volume of the big cube = sum of the volumes of the three small cubes.
(12)³ = (6)³ + (8)³ + x³ ⇒ 1728 = 216 + 512 + x³ ⇒ 1728 = 728 + x³ ⇒ x³ = 1000 ⇒ x = 10 cm.
Therefore, the edge of the third cube is 10 cm.
Teacher's Note: Melting and recasting keeps total volume constant, so volumes add.
Exam Note: Equate volumes, then take the cube root of 1000.
Question 3. A hemisphere of lead of radius 8 cm is cast into a right circular cone of base radius 6 cm. Determine the height of the cone, correct to two places of decimals.
Solution. Radius of hemisphere = 8 cm, radius of cone = 6 cm. Volume of hemisphere = volume of cone.
(2/3)πr³ = (1/3)πR²h ⇒ (2/3) × π × 8 × 8 × 8 = (1/3) × π × 6 × 6 × h ⇒ h = 1024/36 = 28.44 cm.
Teacher's Note: Hemisphere volume is (2/3)πr³, not (4/3); equate to cone volume.
Exam Note: Quote formula, substitute, round to two decimals.
Question 4. A solid sphere of radius 3 cm is melted and then recast into small spherical balls each of diameter 0.6 cm. Find the number of small balls thus obtained.
Solution. Radius of bigger sphere R = 3 cm; diameter of small balls = 0.6 cm, so radius r = 0.3 cm. Let the number of small balls be n.
n × (4/3)πr³ = (4/3)πR³ ⇒ nr³ = R³ ⇒ n = R³/r³ = (R/r)³ = (3/0.3)³ = (10)³ = 1000.
Hence, the number of small balls = 1000.
Teacher's Note: Number of pieces equals ratio of volumes; for similar solids it is the cube of the radius ratio.
Exam Note: Convert diameter to radius before forming the ratio.
Question 5. A solid metal cone with radius of base 12 cm and height 24 cm is melted to form solid spherical balls of diameter 6 cm each. Find the number of balls thus formed.
Solution. Radius of cone = 12 cm, height = 24 cm. Volume of cone = (1/3)πR²h = (1/3) × π × 12 × 12 × 24 = 1152π cm³.
Diameter of each ball = 6 cm, so radius = 3 cm. Volume of each ball = (4/3)πr³ = (4/3) × π × 3 × 3 × 3 = 36π cm³.
Total number of balls = volume of cone / volume of a ball = 1152π/36π = 32.
Hence, 32 balls are formed by melting the cone.
Teacher's Note: Divide cone volume by sphere volume; π cancels leaving a whole number.
Exam Note: Find both volumes separately, then divide.
Question 6. A solid metallic sphere of diameter 21 cm is melted and recast into a number of smaller cones, each of diameter 3.5 cm and height 3cm. Find the number of cones so formed.
Solution. Let the number of cones formed be n. Diameter of sphere = 21 cm, so radius = 21/2 cm.
Volume of the sphere = (4/3)πr³ = (4/3) × (22/7) × (21/2)³ = 11 × 21 × 21 = 4851 cm³.
Diameter of cone = 3.5 cm, so radius = 3.5/2 = 7/4 cm, height = 3 cm.
Volume of the cone = (1/3)πr²h = (1/3) × (22/7) × (7/4)² × 3 = (22 × 7)/(4 × 4) cm³.
n × (22 × 7)/(4 × 4) = 4851 ⇒ n = (4851 × 16)/(22 × 7) = 504.
Hence, the number of cones formed = 504.
Teacher's Note: Halve both diameters first; n is sphere volume divided by one cone volume.
Exam Note: Show both volumes with π = 22/7; answer is a whole number.
Question 7. Spherical ball of diameter 21cm is melted and recasted into cubes, each of side 1 cm. Find the number of cubes thus formed. [Use π=22/7]
Solution. Diameter of sphere = 21 cm, so radius = 21/2 cm. Volume of the sphere = (4/3)πr³ = (4/3) × (22/7) × (21/2)³ = 11 × 21 × 21 = 4851 cm³.
Volume of cube = a³ = 1³. Let the number of cubes be n: 4851 = n × 1 ⇒ n = 4851.
Hence, number of cubes is 4851.
Teacher's Note: Unit cubes make the count numerically equal to the sphere volume in cm³.
Exam Note: Use π = 22/7 so the volume comes out exact.
Question 8. The internal and external diameters of a hollow hemispherical shell are 6cm and 10cm respectively. It is melted and recast into a solid cone of base diameter 14cm. Find the height of the cone so formed.
Solution. Internal radius r = 3 cm, external radius R = 5 cm.
Volume of material in the shell = (2/3)π[R³ − r³] = (2/3)π[5³ − 3³] = (2/3) × (22/7) × 98.
Diameter of cone = 14 cm, so radius = 7 cm. Volume of cone = (1/3)π(r′)²h = (1/3) × (22/7) × 7² × h.
Volume of shell = volume of cone ⇒ (2/3) × (22/7) × 98 = (1/3) × (22/7) × 7² × h ⇒ h = (2 × 98)/(7 × 7) = 4 cm.
Teacher's Note: Shell material = outer hemisphere minus inner hemisphere; equate to cone volume.
Exam Note: Use R³ − r³, not (R − r)³.
Question 9. A solid sphere of radius 6cm is melted into a hollow cylinder of uniform thickness. If the external radius of the base of the cylinder is 5cm and its height is 32 cm, find the uniform thickness of the cylinder.
Solution. Let the inner radius of the cylinder be x cm. Volume of the sphere = (4/3)π(6)³ = 4 × π × 2 × 36 cm³ = 288π cm³.
External radius R = 5 cm, height = 32 cm. Volume of hollow cylinder = πh[R² − r²] = π × 32 × [5² − x²] = 32π[25 − x²].
Volume of sphere = volume of hollow cylinder ⇒ 4 × π × 2 × 36 = 32π[25 − x²] ⇒ (8 × 36)/32 = 25 − x² ⇒ 9 − 25 = −x² ⇒ x² = 16 ⇒ x = ±4 ⇒ x = 4 cm.
Hence, the inner radius of the cylinder is 4 cm. Thickness = external radius − inner radius = 5 − 4 = 1 cm.
Teacher's Note: Hollow cylinder volume is πh(R² − r²); thickness is R − r, not r.
Exam Note: Reject x = −4 and finish with R − r.
Question 10. The diameter of a copper sphere is 6cm. The sphere is melted and is drawn into a long wire of uniform circular cross-section. If the length of the wire is 36cm, find its radius [Take π=2.14]
Solution. Radius of copper sphere = 3 cm. Volume of the sphere = (4/3)πr³ = (4/3) × π × 3³ = 36π cm³.
Length of wire = 36 cm. Let the radius of the wire be R cm. Volume of wire = πR²h = πR² × 36.
Volume of wire = volume of sphere ⇒ 36πR² = 36π ⇒ R² = 1 ⇒ R = 1 cm [taking positive root, because radius can't be negative].
Hence, the radius of wire is 1 cm.
Teacher's Note: Wire is a thin cylinder; π cancels, so the value of π given is not needed.
Exam Note: Reject the negative root; state radius with units.
Question 11. A cylindrical container is filled with ice-cream. Its diameter is 12cm and height is 15cm. The whole ice-cream is distributed among 10 children in equal cones having hemispherical tops. If the height of the conical portion is twice the diameter of its base, find the diameter of the ice-cream cone.
Solution. Let the radius of the base of conical ice cream = x cm. Then height of the conical ice cream = 2 × diameter = 2 × (2x) = 4x cm.
Volume of ice-cream cone = volume of conical portion + volume of hemispherical portion = (1/3)πr²h + (2/3)πr³ = (1/3)πx²(4x) + (2/3)πx³ = (4πx³ + 2πx³)/3 = 2πx³ cm³.
Cylindrical container: radius = 6 cm, height = 15 cm; volume = πr²h = π × 6² × 15 = 540π cm³.
Number of children = volume of cylindrical container / volume of one ice-cream cone ⇒ 10 = (540 × π)/(2 × π × x³) ⇒ x³ = 540/(2 × 10) = 27 ⇒ x = 3.
So, the radius of the base of conical ice cream is 3 cm. Hence, the diameter of the base of conical ice-cream = 2 × 3 = 6 cm.
Teacher's Note: Cone plus hemisphere of the same radius simplifies to 2πx³; the question asks for diameter, not radius.
Exam Note: Double the radius 3 cm at the end.
Exercise 14.4
Question 1. The radii of the ends of a frustum of a cone 45 cm high are 28cm and 7cm. Find its volume, the curved surface area. [Take π=22/7]
Solution.
Frustum = difference of two right circular cones OAB and OCD. Let the height of cone OAB be h1 and its slant height l1, i.e. OA = OB = l1 and OP = h1. Let h2 be the height of cone OCD and l2 its slant height, i.e. OC = OD = l2 and OQ = h2.
We have r1 = 28 cm and r2 = 7 cm and height of frustum (h) = 45 cm. Also, h1 = 45 + h2 …(i)
Since ΔOPB and OQD are similar, h1/h2 = 28/7 = 4/1 ⇒ h1 = 4h2 …(ii)
From (i) and (ii): 4h2 = 45 + h2 ⇒ 3h2 = 45 ⇒ h2 = 15 cm, and h1 = 4 × 15 = 60 cm.
Volume of frustum = vol. of cone OAB − vol. of cone OCD = (1/3)πr1²h1 − (1/3)πr2²h2 = (1/3) × (22/7)[28² × 60 − 7² × 15] = (1/3) × (22/7) × 15[28² × 4 − 7²] = 5 × (22/7)[3136 − 49] = 5 × (22/7) × 3087 = 5 × 22 × 441 = 48510 cm³.
Slant heights: l1 = √{(28)² + (60)²} = √{(4 × 7)² + (4 × 15)²} = 4√{7² + 15²} = 4√274 = 4 × 16.55 = 66.20 cm, and l2 = √{7² + 15²} = √274 = 16.55 cm.
CSA of frustum = CSA of cone OAB − CSA of cone OCD = πr1l1 − πr2l2 = (22/7)[28 × 66.20 − 7 × 16.55] = 22[4 × 66.20 − 16.55] = 22 × 248.25 = 5461.5 cm².
Teacher's Note: Complete the cone with similar triangles to get h₁ and h₂; frustum is big cone minus small cone.
Exam Note: Find h₁, h₂ by similarity before volume and CSA.
Question 2. A drinking glass is in the shape of a frustum of a cone of height 14cm. The diameters of its two circular ends are 4cm and 2cm. Find the capacity of the glass.
Solution. Height of frustum = 14 cm. Diameter of 1st circular end = 4 cm, so radius R = 2 cm. Diameter of 2nd circular end = 2 cm, so radius r = 1 cm.
Capacity of the glass = volume of frustum = (1/3)πh(R² + r² + Rr) = (1/3) × (22/7) × 14[(2)² + (1)² + 2 × 1] = (44/3)[4 + 1 + 2] = (44 × 7)/3 = 102.66 cm³.
Hence, the volume of glass = 102.66 cm³.
Teacher's Note: Convert diameters to radii, then use the frustum volume formula (1/3)πh(R² + r² + Rr).
Exam Note: Substitute R = 2, r = 1; cubic units in answer.
Question 3. The radii of the circular ends of a solid frustum of a cone are 33 cm and 27cm, and its slant height is 10cm. Find its capacity and total surface area. [Take π=22/7]
Solution. Greater radius R = 33 cm, smaller radius r = 27 cm, slant height l = 10 cm.
Total surface area of the frustum = πR² + πr² + πl(R + r) = π[(33)² + (27)² + 10 × (33 + 27)] = π[1089 + 729 + 600] = (22/7) × 2418 = 7599.428 cm² = 7599.43 cm².
Height: l² = (R − r)² + h² ⇒ (10)² = (33 − 27)² + h² ⇒ 100 = 36 + h² ⇒ h² = 64 ⇒ h = ±8 ⇒ h = 8 cm.
Capacity of the solid frustum = (1/3)πh(R² + r² + Rr) = (1/3) × (22/7) × 8[(33)² + (27)² + 33 × 27] = (22 × 8)/21 × [1089 + 729 + 891] = (22 × 8 × 2709)/21 = 22704 cm³.
Teacher's Note: Get h from l² = (R − r)² + h²; total surface area includes both circular ends.
Exam Note: Include both end areas in total surface area.
Question 4. The perimeters of the ends of the frustum of a cone are 96 cm and 68 cm. If the height of the frustum be 20 cm, find its radii, slant height, volume and total surface. [Take π=22/7]
Solution. Let the radii of the circular ends of the frustum be R and r respectively.
Perimeter of one end = 96 cm ⇒ 2πR = 96 ⇒ R = 96/2π = (96 × 7)/(2 × 22) ⇒ R = 15.27 cm.
Perimeter of other end = 68 cm ⇒ 2πr = 68 ⇒ r = (68 × 7)/(2 × 22) ⇒ r = 10.82 cm.
Height of the frustum = 20 cm. Slant height l = √{h² + (R − r)²} = √{(20)² + (15.27 − 10.82)²} = √{400 + (4.45)²} = √(400 + 19.80) = √419.80 = 20.49 cm.
Volume of the frustum = (1/3)πh(R² + r² + Rr) = (1/3) × (22/7) × 20[(15.27)² + (10.82)² + 15.27 × 10.82] = (22 × 20)/21 [233.1729 + 117.0724 + 165.2214] = (22 × 20 × 515.4667)/21 = 10800.25 cm³.
Total surface area = πR² + πr² + πl(R + r) = π[(15.27)² + (10.82)² + 20.49 × (15.27 + 10.82)] = π[233.1729 + 117.0724 + 534.5841] = (22/7) × 884.83 = 2780.89 cm².
Teacher's Note: Perimeter 2πR gives each radius; then slant height needs the radius difference and height.
Exam Note: Keep two decimals in radii; answers are approximate.
Question 5. A friction clutch in the form of the frustum of a cone, the diameters of the ends being 8cm, and 10 cm and length 8 cm. Find its bearing surface and its volume. [Take π=3.14]
Solution. Diameter of one end = 10 cm, so radius R = 5 cm. Diameter of other end = 8 cm, so radius r = 4 cm. Slant height l = 8 cm.
Height h = √{l² − (R − r)²} = √{(8)² − (5 − 4)²} = √(64 − 1) = √63 = 7.937 cm.
Bearing surface of the clutch = CSA of the frustum = πl(R + r) = 3.14 × 8 × (5 + 4) = 25.12 × 9 = 226.08 cm².
Volume of the frustum = (1/3)πh(R² + r² + Rr) = (1/3) × 3.14 × 7.93[(5)² + (4)² + 5 × 4] = (3.14 × 7.93)/3 [25 + 16 + 20] = (3.14 × 7.937 × 61)/3 = 506.75 cm³.
Hence, volume of frustum = 506.75 cm³.
Teacher's Note: Length 8 cm is the slant length here, so height must be derived; bearing surface means CSA.
Exam Note: Treat 'length' as slant height; bearing surface is CSA only.
Question 6. A bucket is in the form of a frustum of a cone. Its depth is 15cm and the diameters of the top and the bottom are 56 cm and 42 cm respectively. Find how many litres of water can the bucket hold. [Take π=22/7]
Solution. Greater diameter = 56 cm, so R = 28 cm. Smaller diameter = 42 cm, so r = 21 cm. Height h = 15 cm.
Capacity of the frustum = (1/3)πh(R² + r² + Rr) = (1/3) × (22/7) × 15 × [28² + 21² + 28 × 21] = (22 × 15)/21 [784 + 441 + 588] = 22 × (5/7) × 1813 = 28490 cm³ = 28.49 litres.
Teacher's Note: Capacity means frustum volume; convert cm³ to litres by dividing by 1000.
Exam Note: Convert units at the end: 1000 cm³ = 1 litre.
Question 7. An open metal bucket is in the shape of a frustum of a cone, mounted on a hollow cylindrical base made of the same metallic sheet (see Fig.) The diameters of the two circular ends of the bucket are 45 cm and 25cm, the total vertical height of the bucket is 40cm and that of the cylindrical base is 6cm. Find the area of the metallic sheet used to make the bucket, where we do not take into account the handle of the bucket. Also, find the volume of water the bucket can hold. [Take π=22/7]
Solution. Diameter of bigger circular end = 45 cm, so R = 45/2 cm. Diameter of smaller circular end = 25 cm, so r = 25/2 cm.
Height of frustum = total height of bucket − height of cylinder = 40 − 6 = 34 cm.
Slant height of the frustum l = √{h² + (R − r)²} = √{34² + (45/2 − 25/2)²} = √{1156 + (20/2)²} = √(1156 + 100) = √1256 = 35.44 cm.
Curved surface area of frustum = πl(R + r) = (22/7) × 35.44 × (45/2 + 25/2) = (22/7) × 35.44 × (70/2) = 22 × 35.44 × 5 = 3898.4 cm².
Curved surface area of cylinder = 2πrh = 2 × (22/7) × (25/2) × 6 = 471.428 cm².
Area of circular base = πr² = (22/7) × (25/2) × (25/2) = 491.07 cm².
Area of metallic sheet used = CSA of frustum + area of circular base + CSA of cylinder = 3898.4 + 471.428 + 491.07 = 4860.89 = 4860.9 cm².
Volume of water that bucket can hold = (1/3)πh(R² + r² + Rr) = (1/3) × (22/7) × 34[(22.5)² + (12.5)² + 22.5 × 12.5] = (22 × 34)/21 [506.25 + 156.25 + 281.25] = (22 × 34 × 943.75)/21 = 33615.47 cm³.
We know that 1 cm³ = 0.001 litre. ∴ Volume of water that bucket can hold = 33.62 litres (approx.)
Teacher's Note: Only the frustum height (34 cm) counts for volume; sheet area has three parts including the base.
Exam Note: Do not use the open top; add frustum CSA, cylinder CSA, base.
Question 8. A bucket made up of a metal sheet is in the form of frustum of a cone. Its depth is 24 cm and the diameters of the top and bottom are 30 cm and 10 cm respectively. Find the cost of milk which can completely fill the bucket at the rate of Rs. 20 per litre and the cost of metal sheet used if it costs Rs. 10 per 100cm². [Use π=3.14]
Solution. Greater diameter = 30 cm, so R = 15 cm. Smaller diameter = 10 cm, so r = 5 cm. Height = 24 cm.
Slant height l = √{h² + (R − r)²} = √{(24)² + (15 − 5)²} = √(576 + 100) = √676 = 26 cm.
Volume of the frustum = (1/3)πh(R² + r² + Rr) = (1/3) × 3.14 × 24[(15)² + (5)² + 15 × 5] = 3.14 × 8 [225 + 25 + 75] = 3.14 × 8 × 325 = 8164 cm³ = 8.164 litres.
A litre of milk costs Rs 20, so total cost of filling the bucket with milk = Rs 20 × 8.164 = Rs 163.28.
Surface area of the bucket = CSA of the frustum + area of circular base = πl(R + r) + πr² = π[{26 × (15 + 5)} + (5)²] = π[520 + 25] = 3.14 × 545 = 1711.3 cm².
Cost of 100 cm² of metal sheet = Rs 10, so cost of 1 cm² = 10/100. Cost of 1711.3 cm² of metal sheet = (1711.3 × 10)/100 = Rs 171.13.
Teacher's Note: Bucket is open at top: sheet = frustum CSA + bottom base; milk cost uses volume in litres.
Exam Note: Divide cm³ by 1000 for litres; sheet cost per cm².
Question 9. A tent is made in the form of a conic frustum, surmounted by a cone. The diameters of the base and top of the frustum are 14m and 7 m and its height is 8 m. The height of the tent is 12m. Find the quantity of canvas required. [Take π=22/7]
Solution. For the lower portion of the tent: diameter of the base = 14 m, so radius R = 7 m. Diameter of the top end of the frustum = 7 m, so r = 7/2 m = 3.5 m. Height of the frustum h = 8 m.
Slant height l = √{h² + (R − r)²} = √{(8)² + (7 − 3.5)²} = √(64 + (3.5)²) = √(64 + 12.25) = √76.25 = 8.73 m.
For the conical part: radius of the cone base r = 3.5 m. Height of the cone = height of the tent − height of frustum = 12 − 8 = 4 m. Slant height of cone L = √{(4)² + (3.5)²} = √(16 + 12.25) = √28.25 = 5.3 m.
Total quantity of canvas = CSA of frustum + CSA of conical top = πl(R + r) + πrL = π[8.73(7 + 3.5) + 3.5 × 5.3] = (22/7)[91.66 + 18.6] = (22/7)[110.26] = 346.5 m².
Teacher's Note: Canvas = frustum CSA + cone CSA only; the cone's height is tent height minus frustum height.
Exam Note: Use no base area; tent has no floor.
Question 10. An oil funnel of tin sheet consists of a cylindrical portion 8 cm along attached to a frustum of a cone. If the total height be 15cm, the diameter of the cylindrical portion 1 cm and diameter of the top of the funnel 10cm, find the area of the tin required. [Take π=22/7]
Solution. Diameter of top of funnel = 10 cm, so R = 5 cm. Diameter of cylindrical portion = 1 cm, so r = 1/2 = 0.5 cm.
Height of frustum = total height − height of cylindrical part = 15 − 8 = 7 cm.
Slant height l = √{h² + (R − r)²} = √{(7)² + (5 − 0.5)²} = √(49 + (4.5)²) = √(49 + 20.25) = √69.25 = 8.32 cm.
CSA of frustum = πl(R + r) = (22/7) × 8.32 × (5 + 0.5) = (22/7) × 8.32 × (5.5) = 143.81 cm².
Height of cylinder H = 8 cm. CSA of cylinder = 2πrH = 2 × (22/7) × 0.5 × 8 = 25.14 cm².
Area of tin required = CSA of frustum + CSA of cylinder = 143.81 + 25.14 = 168.95 cm².
Teacher's Note: Funnel is open at both ends: tin area is frustum CSA plus cylinder CSA only.
Exam Note: Frustum height is 15 − 8 = 7 cm, not 15.
Free study material for Mathematics
Download KC Sinha Solutions for Class 10 Math PDF
Download KC Sinha Solutions for Class 10
Access the complete chapter-wise PDF for KC Sinha Solutions Class 10 Maths Chapter 14 Surface Areas And Volumes Part 2. These structured KC Sinha Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Detailed Calculation Guides for Class 10
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 10 Mathematics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.