Solutions for Class 10 Mathematics: Chapter 12 Constructions
Explore reliable textbook solutions for Chapter 12 Constructions tailored for Class 10 learners using methodologies. Utilizing these Mathematics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice Class 10 Mathematics Solutions: Chapter 12 Constructions
View or download the dedicated Chapter 12 Constructions solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Mathematics.
12. Constructions - Questions 14 to 27
Exercise
Question 14. Construct an isosceles triangle whose base is 8 cm and altitude 4 cm and then another triangle whose sides are 3/2 times the corresponding sides of the isosceles triangle.
Solution.
Step 1: Draw the base AB = 8 cm.
Step 2: Mark the midpoint M of AB and, using a protractor, draw a line perpendicular to AB at M.
Step 3: With M as centre and radius 4 cm, cut an arc on this perpendicular; call the point C. Join AC and BC.
Step 4: Draw a ray AX from A, making an acute angle with AB, below AB.
Scale factor = 3/2 (greater than 1).
Step 5: On AX mark points X1, X2, X3 with AX1 = X1X2 = X2X3 (3 equal parts, the greater of 3 and 2).
Step 6: Join X2 to B (2 is the smaller of 3 and 2).
Step 7: Extend AB and, from X3, draw a line parallel to X2B meeting the extended AB at D.
Step 8: Extend AC and, from D, draw a line parallel to BC meeting the extended AC at E. Triangle ADE has sides 3/2 (that is, 1½) times those of triangle ABC.
Teacher's Note: Enlarging by m/n: mark m equal parts, join the n-th point, draw a parallel from the m-th point.
Exam Note: Mention 3 equal divisions, join X2B, parallels; keep construction arcs.
Question 15. Draw a right triangle in which the sides (other than hypotenuse) are of length 4 cm and 3 cm. Then construct another triangle whose sides are 5/3 times the corresponding sides of the given triangle.
Solution.
Step 1: Draw AB = 4 cm.
Step 2: At A draw AC = 3 cm at 90° to AB. Join B and C to get the right triangle ABC.
Step 3: Draw a ray AX from A, below AB, making an acute angle with AB.
Step 4: On AX mark five equal parts X1, X2, X3, X4, X5 (5 is the greater of 5 and 3).
Step 5: Join X3 to B (3 is the smaller of 5 and 3).
Step 6: Extend AB and, from X5, draw a line parallel to X3B meeting the extended AB at D.
Step 7: Extend AC and, from D, draw a line parallel to BC meeting the extended AC at E. Triangle ADE has sides 5/3 times those of triangle ABC (AD = 20/3 cm, AE = 5 cm).
Teacher's Note: Ratio 5/3 greater than 1: five equal parts on the ray, join the third point.
Exam Note: Show 5 equal arcs, X3B joined, parallel from X5; write ratio.
Question 16. Draw a triangle ABC with side BC = 7 cm, ∠A = 105°. Then construct a triangle whose sides are 4/3 times the corresponding sides of ΔABC.
Solution.
Note: one more angle is needed to fix the triangle, so we take ∠B = 45°.
∠A + ∠B + ∠C = 180° (angle sum of a triangle)
105° + 45° + ∠C = 180°, so ∠C = 30°.
Step 1: Draw BC = 7 cm.
Step 2: With a protractor draw a ray at 45° from B and a ray at 30° from C; their intersection is A.
Step 3: Draw a ray BX from B, below BC, making an acute angle with BC.
Step 4: On BX mark four equal parts X1, X2, X3, X4 (4 is the greater of 4 and 3).
Step 5: Join X3 to C (3 is the smaller of 4 and 3).
Step 6: Extend BC and, from X4, draw a line parallel to X3C meeting the extended BC at D.
Step 7: From D draw a line parallel to AC meeting BA (extended) at E. Triangle EBD has sides 4/3 times those of triangle ABC.
Teacher's Note: Only ∠A is given, so an assumed second angle is needed; the angle sum fixes the third.
Exam Note: State the assumed ∠B = 45° and ∠C = 30° clearly.
Question 17. Draw a circle with radius 4 cm. Mark a point P on it. Draw a tangent at P to the circle.
Solution.
Step 1: With radius 4 cm draw a circle with centre O.
Step 2: Take a point P on the circle and draw the line OP extended beyond P, passing through P.
Step 3: With P as centre and any radius, cut arcs on this line on both sides of P at J and K.
Step 4: With J as centre and radius greater than JP, draw arcs above and below the line.
Step 5: With K as centre and the same radius, draw arcs cutting the previous arcs at R and T. Draw the line RT through P; it is the tangent to the circle at P.
Teacher's Note: Tangent is perpendicular to the radius at the point of contact; build a perpendicular at P.
Exam Note: Draw radius OP, perpendicular at P; give reason.
Question 18. Draw a circle of radius 3 cm. Draw any diameter of the circle. At the end points of the diameter of the circle, draw tangents to the circle. Are they parallel?
Solution.
Step 1: With radius 3 cm draw a circle with centre O.
Step 2: Draw a diameter AB. Radius is perpendicular to the tangent, so with a protractor draw lines at 90° to AB at A and at B. These are the tangents. Take points C and D on them (on opposite sides of AB).
∠BAC = ∠ABD = 90° (radius is perpendicular to tangent)
∠BAC and ∠ABD are alternate angles for the two tangents with transversal AB.
As alternate angles are equal, the tangents are parallel.
Teacher's Note: Tangents at the ends of a diameter make equal alternate angles of 90°, hence parallel.
Exam Note: Give reason: alternate angles equal, so parallel.
Question 19. Draw a circle of radius 5 cm. Take a point P on the circle. Draw the tangent to the circle at point P without using the centre of the circle.
Solution.
Step 1: With radius 5 cm draw a circle and take a point P on it.
Step 2: Draw a chord PQ and take a point R on the major arc; join PR and QR to form ∠PRQ.
Using the alternate segment theorem, we draw ∠QPT equal to ∠PRQ, so that PT is tangent to the circle at P.
Step 3: With R as centre and any radius, cut arcs on RP and RQ at J and K respectively.
Step 4: With the same radius and P as centre, draw an arc cutting PQ at S.
Step 5: Measure the distance JK in the compass; with S as centre cut the arc of step 4 at T. Draw the line PT; it is the required tangent.
Teacher's Note: Alternate segment theorem: angle between tangent and chord equals the angle in the alternate segment.
Exam Note: Name the alternate segment theorem; copy the angle accurately.
Question 20. Draw a circle of radius 6 cm. From a point 10 cm away from its centre, construct the pair of tangents to the circle and measure their lengths.
Solution.
Step 1: Draw a circle of radius 6 cm with centre O.
Step 2: Mark a point P with OP = 10 cm.
Step 3: Using a scale, mark the midpoint M of OP.
Step 4: With M as centre and radius MP (= MO), draw arcs cutting the circle at T and Q.
Step 5: Join PT and PQ; these are the required tangents. Measure PT and PQ with a scale.
Corrected: the book only asks to measure. By calculation (OT ⊥ PT): PT = √(OP2 − OT2) = √(100 − 36) = √64 = 8 cm, so PT = PQ = 8 cm.
Teacher's Note: Circle on OP as diameter gives right angle at the contact point, so PT is tangent.
Exam Note: Measured length 8 cm; support with Pythagoras.
Question 21. Draw two concentric circles with centre O and radii 2 cm and 4 cm. From a point on the outer circle draw a tangent to the inner circle.
Solution.
Step 1: With radius 2 cm and centre O draw the inner circle.
Step 2: With radius 4 cm and centre O draw the outer circle. Take any point P on the outer circle.
Now we have to draw a tangent from P to the inner circle; this is the same as drawing tangents from an external point.
Step 3: Join OP and, using a scale, mark its midpoint M (it lies on the inner circle, since OM = 2 cm).
Step 4: With M as centre and radius MO, cut arcs on the inner circle at Q and T.
Step 5: Join PQ and PT; these are the required tangents. (Each has length √(42 − 22) = 2√3 ≈ 3.46 cm.)
Teacher's Note: Same as tangent from an external point: use the circle on OP as diameter.
Exam Note: Mention midpoint M of OP; right angle in semicircle.
Question 22. Draw a circle of radius 4 cm. From a point on the concentric circle of radius 6 cm, draw a tangent to the inner circle and measure its length. Also, verify the measurement by actual calculation.
Solution.
Step 1: With radius 4 cm and centre O draw the inner circle.
Step 2: With radius 6 cm and centre O draw the outer circle. Take any point P on the outer circle.
Now we have to draw a tangent from P to the inner circle; this is the same as drawing tangents from an external point.
Step 3: Join OP and mark its midpoint M using a scale.
Step 4: With M as centre and radius MO, cut arcs on the inner circle at Q and T.
Step 5: Join PQ and PT; these are the required tangents. Measure PQ and PT with a scale.
Verification: join OQ.
∠OQP = 90° (radius OQ is perpendicular to tangent PQ at the point of contact Q)
In ΔOQP: OQ = 4 cm (radius of inner circle), OP = 6 cm (radius of outer circle).
By Pythagoras: OP2 = OQ2 + PQ2
62 = 42 + PQ2, so 36 = 16 + PQ2, PQ2 = 20
PQ = √20 = 2√5 ≈ 4.5 cm
Hence verified.
Teacher's Note: Radius meets tangent at 90°, so Pythagoras in ΔOQP gives PQ = 2√5.
Exam Note: Quote 4.5 cm measured and 2√5 calculated.
Question 23. Draw a circle of radius 3 cm. Take two points P and Q on one of its extended diameter each at a distance of 7 cm from its centre. Draw tangents to the circle from these two points P and Q.
Solution.
Step 1: With radius 3 cm draw a circle with centre O.
Step 2: Draw a straight line through O and mark points P and Q on its two sides, OP = OQ = 7 cm.
Step 3: Using a scale, mark the midpoint M of OP. With M as centre and radius MO cut arcs on the circle at two points (T and T′).
Step 4: Join P to these two points; they are the required tangents from P.
Step 5: Similarly, take the midpoint N of OQ, with N as centre and radius NO cut arcs on the circle at K and L. QK and QL are the required tangents from Q.
Teacher's Note: Two external points on a diameter: repeat the midpoint-circle construction for each.
Exam Note: Show both pairs of tangents; each of length √40.
Question 24. Draw a circle of radius 5 cm. Take a point P outside the circle. Construct a pair of tangents from P to the circle without using its centre.
Solution.
Step 1: Draw a circle of radius 5 cm. Take a point P outside it and draw a line through P cutting the circle at A and B (chord AB).
Step 2: With P as centre and radius PA, cut the line at C on the side of A, so PC = PA.
Step 3: Draw the perpendicular bisector of CB: with C as centre and a radius more than half of CB, draw arcs above and below CB.
Step 4: With B as centre and the same radius, draw arcs cutting the earlier arcs; join the intersection points to get the perpendicular bisector, meeting CB at M.
Step 5: With M as centre and radius MB, draw a semicircle on CB.
Step 6: At P draw a perpendicular to CB meeting the semicircle at L.
Step 7: With P as centre and radius PL, cut arcs on the circle at Q and T. Join PT and PQ; these are the required tangents.
(Reason: PL2 = PC·PB = PA·PB = PT2, tangent-secant relation.)
Teacher's Note: Tangent length² = PA·PB; the semicircle on CB gives PL² = PC·PB.
Exam Note: Explain PL equals tangent length by PA·PB.
Question 25. Draw a circle of radius 4 cm. Draw two tangents to the circle such that they include an angle of 135°.
Solution.
Consider a rough figure: DB and DC are tangents and the centre of the circle is A.
In quadrilateral ABDC: ∠BDC = 135° (given); ∠DBA = 90° and ∠DCA = 90° (radius is perpendicular to tangent at the point of contact).
Sum of angles of a quadrilateral is 360°:
135° + 90° + 90° + ∠BAC = 360°, so 315° + ∠BAC = 360°, so ∠BAC = 45°.
Now let us construct.
Step 1: Draw a circle of radius 4 cm, mark the centre A and draw radius AB.
Step 2: Using a protractor draw a line at 45° to AB from A and mark its intersection with the circle as C. Join AC.
Step 3: At B draw a line perpendicular to AB (tangent at B).
Step 4: At C draw a line perpendicular to AC and mark its intersection with the line of step 3 as D.
Hence tangents DB and DC are ready at an angle of 135°.
Teacher's Note: Angle between tangents + angle between radii = 180°; so radii are 45° apart.
Exam Note: Show rough figure and quadrilateral angle sum 360°.
Question 26. Draw a circle of radius 5 cm. Draw any line through the centre of the circle. Draw a tangent to the circle making an angle of 45° with the line. What is the length of the tangent?
Solution.
Consider a rough figure: CB is the tangent, A is the centre and CA is a line through the centre.
∠BCA = 45° (given); ∠CBA = 90° (radius is perpendicular to tangent).
In ΔABC: ∠ABC + ∠ACB + ∠BAC = 180°, so 90° + 45° + ∠BAC = 180°, so ∠BAC = 45°.
Now let us construct.
Step 1: Draw a circle of radius 5 cm with centre A and draw a line through A.
Step 2: Using a protractor draw a line at 45° to this line from A, meeting the circle at B.
Step 3: At B draw a line perpendicular to AB; its intersection with the line through the centre is C. CB is the required tangent at 45°.
Measure CB with a scale: this is the length of the tangent.
Since ∠BAC = ∠BCA = 45°, CB = AB = 5 cm. The length of the tangent is 5 cm.
Teacher's Note: Isosceles right triangle ABC: equal angles of 45° give tangent length equal to the radius.
Exam Note: Answer 5 cm with the equal-angles reason.
Question 27. Draw a pair of tangents to a circle of radius 2.3 cm which are inclined to each other at an angle of 60°.
Solution.
Consider a rough figure: DB and DC are tangents and the centre of the circle is A.
In quadrilateral ABDC: ∠BDC = 60° (given); ∠DBA = 90° and ∠DCA = 90° (radius is perpendicular to tangent at the point of contact).
Sum of angles of a quadrilateral is 360°:
60° + 90° + 90° + ∠BAC = 360°, so 240° + ∠BAC = 360°, so ∠BAC = 120°.
Now let us construct.
Step 1: Draw a circle of radius 2.3 cm, mark the centre A and draw radius AB.
Step 2: Using a protractor draw a line at 120° to AB from A and mark its intersection with the circle as C. Join AC.
Step 3: At B draw a line perpendicular to AB (tangent at B).
Step 4: At C draw a line perpendicular to AC and mark its intersection with the line of step 3 as D.
Hence tangents DB and DC are ready at an angle of 60°.
Teacher's Note: Radii angle = 180° − tangent angle = 120°; draw perpendiculars at their ends.
Exam Note: Show the quadrilateral angle-sum working to get 120°.
Free study material for Mathematics
Class 10 Mathematics: KC Sinha Solutions for KC Sinha Solutions Class 10 Maths Chapter 12 Constructions Part 2
Complete Math Solutions for KC Sinha Solutions Class 10 Maths Chapter 12 Constructions Part 2
Access the complete chapter-wise PDF for KC Sinha Solutions Class 10 Maths Chapter 12 Constructions Part 2. These structured KC Sinha Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your Class 10 Exam Preparation
In addition to these KC Sinha Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 10 Mathematics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.