IE Irodov Solutions for JEE Physics: Chapter 05 Dynamics Of A Solid Body
Review structured textbook solutions for JEE Physics Chapter 05 Dynamics Of A Solid Body prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice JEE Physics Solutions: Chapter 05 Dynamics Of A Solid Body
View or download the dedicated Chapter 05 Dynamics Of A Solid Body solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Dynamics Of A Solid Body - Questions 234 to 259
Dynamics Of A Solid Body (Part - 1)
Question 234. A thin uniform rod AB of mass m = 1.0 kg moves translationally with acceleration w = 2.0 m/s2 due to two antiparallel forces F1 and F2 (Fig. 1.52). The distance between the points at which these forces are applied is equal to a = 20 cm. Besides, it is known that F2 = 5.0 N. Find the length of the rod.
Solution. Since the motion of the rod is purely translational, the net torque about the C.M. of the rod must be zero.
Thus F1(l/2) = F2(l/2 − a), or F1/F2 = 1 − a/(l/2) (1)
For the translational motion of the rod, F2 − F1 = mwc, or 1 − F1/F2 = mwc/F2 (2)
From (1) and (2): a/(l/2) = mwc/F2, or l = 2aF2/(mwc) = 1 m.
Teacher's Note: Pure translation means zero net torque about the centre of mass; combine that with F = ma.
Exam Note: Write both equations, then divide; answer 1 m.
Question 235. A force F = Ai + Bj is applied to a point whose radius vector relative to the origin of coordinates O is equal to r = ai + bj, where a, b, A, B are constants, and i, j are the unit vectors of the x and y axes. Find the moment N and the arm l of the force F relative to the point O.
Solution. Sought moment N = r × F = (ai + bj) × (Ai + Bj) = aBk + bA(−k) = (aB − bA)k.
The arm of the force is l = N/F = (aB − bA)/√(A2 + B2) (taken in magnitude).
Teacher's Note: Torque is r × F; arm is torque magnitude divided by force magnitude.
Exam Note: Use i×j = k, j×i = −k; note sign of cross terms.
Question 236. A force F1 = Aj is applied to a point whose radius vector r1 = ai, while a force F2 = Bi is applied to the point whose radius vector r2 = bj. Both radius vectors are determined relative to the origin of coordinates O, i and j are the unit vectors of the x and y axes, a, b, A, B are constants. Find the arm l of the resultant force relative to the point O.
Solution. Corrected: the printed solution has misprints in the moment (it shows ab−AB instead of aA−bB).
Net moment about O: N = r1 × F1 + r2 × F2 = (ai × Aj) + (bj × Bi) = aAk + bB(−k) = (aA − bB)k (1)
Resultant force: F = F1 + F2 = Bi + Aj (2)
As N · F = 0 (N ⊥ F), the sought arm is l = N/F = (aA − bB)/√(A2 + B2) (in magnitude).
Teacher's Note: Sum the torques of both forces about O, then divide by the resultant's magnitude.
Exam Note: Cross products carefully; unit vectors give ±k.
Question 237. Three forces are applied to a square plate as shown in Fig. 1.53. Find the modulus, direction, and the point of application of the resultant force, if this point is taken on the side BC. (Forces: F at A directed up along the plane of the plate, F at B directed to the right, F√2 at D directed down and to the right at 45°; the diagonal AC is horizontal.)
Solution. For coplanar forces, about any point in the same plane Σri × Fi = r × Fnet, where Fnet = ΣFi is the resultant force; i.e. Nnet = r × Fnet. The length of the arm is l = Nnet/Fnet.
Here |Fnet| = 2F and it is directed towards the right along AC. Take the origin at C. Then about C, N = (√2 aF + (a/√2)F − √2 aF) = F a/√2, directed normally into the plane of the figure (a = side of the square).
Hence l = F(a/√2)/(2F) = a/(2√2) = (a/2) sin 45°.
Thus the point of application of the resultant force is at the mid-point of the side BC.
Teacher's Note: Resultant force plus equal torque about a point fixes its line of action.
Exam Note: Find F first, then torque about C.
Question 238. Find the moment of inertia (a) of a thin uniform rod relative to the axis which is perpendicular to the rod and passes through its end, if the mass of the rod is m and its length l; (b) of a thin uniform rectangular plate relative to the axis passing perpendicular to the plane of the plate through one of its vertices, if the sides of the plate are equal to a and b, and its mass is m.
Solution. (a) Consider a strip of length dx at a perpendicular distance x from the axis. Its mass is dm = (m/l)dx and its moment of inertia is dI = dm x2 = (m/l)x2dx.
I = ∫0l (m/l)x2dx = ml2/3.
(b) Take the plane of the plate as the xy plane with the origin at the vertex. Ix = ∫dm y2 = ∫0a (m/(ab)) b dy y2 = ma2/3. Similarly Iy = mb2/3.
By the perpendicular axis theorem, Iz = Ix + Iy = (m/3)(a2 + b2).
Teacher's Note: Integrate dm·x2 over strips; use the perpendicular axis theorem for a plate.
Exam Note: Show dm, integral and limits; quote both results.
Question 239. Calculate the moment of inertia (a) of a copper uniform disc relative to the symmetry axis perpendicular to the plane of the disc, if its thickness is equal to b = 2.0 mm and its radius to R = 100 mm; (b) of a uniform solid cone relative to its symmetry axis, if the mass of the cone is equal to m and the radius of its base to R.
Solution. (a) Consider an elementary disc of thickness dx. Its moment of inertia about the z-axis through its C.M. is dIz = (dm)R2/2 = ρS dx R2/2, where ρ is the density and S = πR2.
Iz = (ρSR2/2)∫0bdx = (R2/2)ρSb = (π/2)ρbR4.
Corrected: the printed numerical value is incomplete (“2.”). With ρ(copper) = 8.9 g/cm3, Iz = 0.5 × π × 8900 × 0.002 × (0.1)4 = 2.8 × 10−3 kg·m2 = 2.8 g·m2.
(b) Consider an element disc of radius r and thickness dx at a distance x from the apex O. Then r = x tan α and its volume is πx2tan2α dx, so dm = πx2tan2α dx ρ (where ρ = m/(⅓πR2h) = 3m/(πR2h)).
dI = dm r2/2 = (πρ/2)x4tan4α dx.
I = (πρ/2)tan4α ∫0hx4dx = πρR4h/10 (as tan α = R/h).
Hence I = 3mR2/10.
Teacher's Note: Slice into thin discs of I = dm r²/2 and integrate; copper density needed in (a).
Exam Note: Keep units: mm to m; state density used.
Question 240. Demonstrate that in the case of a thin plate of arbitrary shape there is the following relationship between the moments of inertia: I1 + I2 = I3, where subindices 1, 2, and 3 define three mutually perpendicular axes passing through one point, with axes 1 and 2 lying in the plane of the plate. Using this relationship, find the moment of inertia of a thin uniform round disc of radius R and mass m relative to the axis coinciding with one of its diameters.
Solution. (a) Consider a lamina of arbitrary shape and let 1, 2, 3 coincide with the x, y and z axes, the plane of the lamina being the x-y plane. For a point mass dm at (x, y), the moment of inertia about the x-axis is dIx = dm y2. Thus for the lamina Ix = ∫dm y2, similarly Iy = ∫dm x2, and Iz = ∫dm r2 = ∫dm (x2 + y2) as r = √(x2 + y2).
Thus Iz = Ix + Iy, or I3 = I1 + I2.
(b) Take the plane of the disc as the x-y plane with the origin at the centre. From symmetry Ix = Iy. For a ring element of radius r and thickness dr: dIz = dm r2 = (m/πR2)(2πr dr)r2.
Iz = (2m/R2)∫0Rr3dr = mR2/2.
But Iz = Ix + Iy = 2Ix, thus Ix = Iz/2 = mR2/4.
Teacher's Note: Perpendicular axis theorem for plane laminae; symmetry makes the two diameter moments equal.
Exam Note: Quote theorem, use symmetry, answer mR²/4.
Question 241. A uniform disc of radius R = 20 cm has a round cut as shown in Fig. 1.54 (a circular hole of radius R/2 touching the rim, on the left of the centre O). The mass of the remaining (shaded) portion of the disc equals m = 7.3 kg. Find the moment of inertia of such a disc relative to the axis passing through its centre of inertia and perpendicular to the plane of the disc.
Solution. Use a mathematical trick: treat the shaded portion as the superposition of two complete discs, one of positive density and radius R, and the other of negative density (same magnitude) and radius R/2. As mass ∝ area, their masses are 4m/3 and −m/3, imagined at their respective centres.
Take O as origin and the x-axis to the right. The C.M. (C) of the shaded portion lies on the x-axis: xc = [(−m/3)(−R/2) + (4m/3)(0)]/[(−m/3) + 4m/3] = R/6, i.e. at a distance R/6 from O.
Using the parallel axis theorem, with I = ½m0r02 for a complete disc:
I2C = ½(−m/3)(R/2)2 + (−m/3)(R/2 + R/6)2 = −mR2/24 − (4/27)mR2
I1C = ½(4m/3)R2 + (4m/3)(R/6)2 = (2/3)mR2 + mR2/27
IC = I1C + I2C = (15/24)mR2 − (3/27)mR2 = (37/72)mR2.
Numerically, IC = (37/72)(7.3)(0.20)2 ≈ 0.15 kg·m2.
Teacher's Note: Treat the hole as negative mass; find the C.M. first, then use the parallel axis theorem.
Exam Note: Locate C.M. at R/6, then subtract hole's contribution.
Question 242. Using the formula for the moment of inertia of a uniform sphere, find the moment of inertia of a thin spherical layer of mass m and radius R relative to the axis passing through its centre.
Solution. Moment of inertia of the shaded portion (a thick shell between radii r and R) about the axis through its centre:
I = (2/5)((4/3)πR3ρ)R2 − (2/5)((4/3)πr3ρ)r2 = (2/5)(4/3)πρ(R5 − r5).
Now if R = r + dr, the shaded portion becomes a thin shell, the required shape: dI = (2/5)(4/3)πρ{(r + dr)5 − r5} = (2/5)(4/3)πρ(5r4dr + …).
Neglecting higher-order terms, dI = (2/3)(4πr2dr ρ)r2 = (2/3)mr2, i.e. for the layer of radius R, I = (2/3)mR2.
Teacher's Note: Subtract two solid spheres, then let the thickness tend to zero; keep only first-order terms.
Exam Note: State result 2mR²/3; show the binomial expansion step.
Question 243. A light thread with a body of mass m tied to its end is wound on a uniform solid cylinder of mass M and radius R (Fig. 1.55). At a moment t = 0 the system is set in motion. Assuming the friction in the axle of the cylinder to be negligible, find the time dependence of (a) the angular velocity of the cylinder; (b) the kinetic energy of the whole system.
Solution. (a) The net force effective on the system (cylinder M + body m) is the weight of the body m in a uniform gravitational field, a constant, so the acceleration of the body m is constant.
From conservation of mechanical energy, ΔT + ΔU = 0: ½mv2 + ½(MR2/2)ω2 − mgΔh = 0, or ¼(2m + M)v2 − mgΔh = 0 [as v = ωR at all times]. (1)
But v2 = 2wΔh. Using it in (1): ¼(2m + M)2wΔh − mgΔh = 0, or w = 2mg/(2m + M).
From the kinematical relationship, β = w/R = 2mg/((2m + M)R), so ω(t) = βt = 2mg t/((2m + M)R) = g t/((1 + M/2m)R).
(b) The sought kinetic energy: T(t) = ½mv2 + ½(MR2/2)ω2 = ¼(2m + M)R2ω2, with ω(t) from (a).
Teacher's Note: Constant weight gives constant acceleration; energy conservation links v, ω = v/R and the cylinder's I = MR²/2.
Exam Note: Use v = ωR; give ω(t) and T(t).
Question 244. The ends of thin threads tightly wound on the axle of radius r of the Maxwell disc are attached to a horizontal bar. When the disc unwinds, the bar is raised to keep the disc at the same height. The mass of the disc with the axle is equal to m, the moment of inertia of the arrangement relative to its axis is I. Find the tension of each thread and the acceleration of the bar.
Solution. For equilibrium of the disc and axle (the centre stays at rest): 2T = mg, or T = mg/2.
As the disc unwinds, it has an angular acceleration β given by Iβ = 2Tr, or β = 2Tr/I = mgr/I.
The corresponding linear acceleration is rβ = w = mgr2/I.
Since the disc remains stationary under the combined action of this acceleration and the acceleration (−w) of the bar, which is transmitted to the axle, the bar must have the acceleration w = mgr2/I (directed upward).
Teacher's Note: Disc centre stays at rest, so 2T = mg; torque gives β; bar acceleration is rβ.
Exam Note: Equilibrium of centre first; then torque equation.
Question 245. A thin horizontal uniform rod AB of mass m and length l can rotate freely about a vertical axis passing through its end A. At a certain moment the end B starts experiencing a constant force F which is always perpendicular to the original position of the stationary rod and directed in a horizontal plane. Find the angular velocity of the rod as a function of its rotation angle φ counted relative to the initial position.
Solution. Let the rod be deviated through an angle φ from its initial position at an arbitrary instant, measured relative to the initial position in the positive direction. From the equation of the increment of mechanical energy, ΔT = Aext:
½Iω2 = ∫Nzdφ, or ½(ml2/3)ω2 = ∫0φFl cosφ dφ = Fl sinφ.
Thus ω = √(6F sinφ/(ml)).
Teacher's Note: Torque of a fixed-direction force is Fl cosφ; work-energy theorem integrates it.
Exam Note: Torque = Fl cosφ; I = ml²/3 about the end.
Question 246. In the arrangement shown in Fig. 1.56 the mass of the uniform solid cylinder of radius R is equal to m and the masses of two bodies are equal to m1 and m2. The thread slipping and the friction in the axle of the cylinder are supposed to be absent. Find the angular acceleration of the cylinder and the ratio of tensions T1/T2 of the vertical sections of the thread in the process of motion.
Solution. Since the cylinder is rotating and massive, the tensions differ in the two sections of the thread. Newton's law for the bodies m1 and m2, noting w1 = w2 = βR (no thread slipping), and taking m1 > m2:
m1g − T1 = m1w = m1βR and T2 − m2g = m2w (1)
For the cylinder, Nz = Iβz: (T1 − T2)R = Iβ = mR2β/2 (2)
Simultaneous solution gives: β = (m1 − m2)g / [R(m1 + m2 + m/2)] and T1/T2 = m1(m + 4m2) / [m2(m + 4m1)].
Teacher's Note: A massive pulley makes the two tensions unequal; their difference supplies the torque.
Exam Note: Three equations: two for bodies, one for pulley.
Question 247. In the system shown in Fig. 1.57 the masses of the bodies are known to be m1 and m2, the coefficient of friction between the body m1 and the horizontal plane is equal to k, and a pulley of mass m is assumed to be a uniform disc. The thread does not slip over the pulley. At the moment t = 0 the body m2 starts descending. Assuming the mass of the thread and the friction in the axle of the pulley to be negligible, find the work performed by the friction forces acting on the body m1 over the first t seconds after the beginning of motion.
Solution. Corrected: the printed final expression has m1 − km1 where m2 − km1 is required.
The system is under constant forces, so the accelerations of m1 and m2 are constant and equal in magnitude (v and w) because the thread length is constant. From ΔT + ΔU = Afr, at time t when block m2 has descended h:
½(m1 + m2)v2 + ½(mR2/2)(v2/R2) − m2gh = −km1gh (1) (ω = v/R, no slipping)
But v2 = 2wh. Using it in (1): w = 2(m2 − km1)g / [m + 2(m1 + m2)] (2)
Work done by friction on m1: Afr = −km1gh = −km1g(½wt2) = −k m1(m2 − km1) g2t2 / [m + 2(m1 + m2)] (using (2)).
Teacher's Note: Constant acceleration from energy balance including the pulley's rotational energy; friction work is −km₁g times distance.
Exam Note: Friction work is negative; distance = ½wt².
Question 248. A uniform cylinder of radius R is spinned about its axis to the angular velocity ω0 and then placed into a corner (Fig. 1.58). The coefficient of friction between the corner walls and the cylinder is equal to k. How many turns will the cylinder accomplish before it stops?
Solution. The centre of the cylinder is in translational equilibrium but there is an angular retardation. The friction forces acting on the cylinder are kinetic. N1 is the normal reaction of the floor, N2 that of the wall. From translational equilibrium: mg = N1 + kN2; N2 = kN1.
Hence N1 = mg/(1 + k2); N2 = k mg/(1 + k2).
For pure rotation about its axis, Nz = Iβz: −kN1R − kN2R = (mR2/2)βz, i.e. −kmgR(1 + k)/(1 + k2) = (mR2/2)βz, or βz = −2k(1 + k)g/((1 + k2)R).
From ω2 = ω02 + 2βzΔφ with ω = 0: Δ&phi = ω02(1 + k2)R / (4k(1 + k)g).
Hence the sought number of turns n = Δφ/2π = ω02(1 + k2)R / (8πk(1 + k)g).
Teacher's Note: Both contacts exert kinetic friction; the wall's normal force is kN1, which changes the floor's normal force.
Exam Note: Two normal forces, then torque, then ω² = 2βΔφ.
Question 249. A uniform disc of radius R is spinned to the angular velocity ω and then carefully placed on a horizontal surface. How long will the disc be rotating on the surface if the friction coefficient is equal to k? The pressure exerted by the disc on the surface can be regarded as uniform.
Solution. It is the moment of the friction force which brings the disc to rest. The friction is applied to each section of the disc and, since these sections lie at different distances from the axis, the moments differ. To find Nz (z the axis of rotation), partition the disc into thin rings. The friction on the ring element is dfr = k(2πr dr σ)g (where σ is the mass per unit area of the disc).
dNz = −r dfr = −2πkσg r2dr. Integrating from 0 to R: Nz = −2πkσg∫0Rr2dr = −(2/3)πkσgR3.
From Nz = Iβz: −(2/3)πkσgR3 = ((πR2σ)R2/2)βz, or βz = −4kg/(3R).
From ωz = ω0z + βzt: 0 = ω − (4kg/3R)t, so t = 3Rω/(4kg).
Teacher's Note: Friction torque must be integrated over rings (uniform pressure): N = (2/3)kmgR, not kmgR.
Exam Note: Integrate ring torque r²dr; I = mR²/2.
Question 250. A flywheel with the initial angular velocity ω0 decelerates due to the forces whose moment relative to the axis is proportional to the square root of its angular velocity. Find the mean angular velocity of the flywheel averaged over the total deceleration time.
Solution. According to the question, I dω/dt = −k√ω, or I dω/√ω = −k dt.
Integrating, √ω = √ω0 − kt/(2I), or ω = k2t2/(4I2) − √ω0 kt/I + ω0 (noting that at t = 0, ω = ω0). (1)
Let the flywheel stop at t = t0; then from (1), t0 = 2I√ω0/k.
Hence the sought average angular velocity <ω> = ∫0t0ω dt / ∫0t0dt = ω0/3.
Teacher's Note: Integrate I dω/dt = −k√ω for ω(t), find stopping time, then average over time.
Exam Note: Find t0 first; time-average, not ½ω0.
Dynamics Of A Solid Body (Part - 2)
Question 251. A uniform cylinder of radius R and mass M can rotate freely about a stationary horizontal axis O (Fig. 1.59). A thin cord of length l and mass m is wound on the cylinder in a single layer. Find the angular acceleration of the cylinder as a function of the length x of the hanging part of the cord. The wound part of the cord is supposed to have its centre of gravity on the cylinder axis.
Solution. Use dMz/dt = Nz relative to the axis through O. (1)
The angular momentum of the system about the axis is Mz = Iω + mvR = (M/2 + m)R2ω [where I = (M/2)R2 and v = ωR (no cord slipping)].
So dMz/dt = (MR2/2 + mR2)βz. (2)
The downward pull of gravity on the overhanging part is the only external force exerting a torque about the z-axis through O: Nz = (m/l)xgR.
Hence (MR2/2 + mR2)βz = (m/l)xgR, giving βz = 2mgx / (lR(M + 2m)) > 0.
Note: the problem may also be solved using conservation of mechanical energy of the system (cylinder + cord) in the uniform field of gravity.
Teacher's Note: Only the hanging part's weight gives torque; its mass is (m/l)x, so β grows linearly with x.
Exam Note: Angular momentum includes the cord moving at v = ωR.
Question 252. A uniform sphere of mass m and radius R rolls without slipping down an inclined plane set at an angle α to the horizontal. Find: (a) the magnitudes of the friction coefficient at which slipping is absent; (b) the kinetic energy of the sphere t seconds after the beginning of motion.
Solution. (a) Choose the positive direction of x and φ (rotation angle) along the incline in the downward direction and in the sense of ω (unidirectional rotation). From the equations of dynamics of a rigid body, Fx = mwcx and Ncz = Icβz:
mg sinα − fr = mw (1); frR = (2/5)mR2β (2); but fr ≤ kmg cosα (3)
The absence of slipping gives w = βR (4).
The simultaneous solution of all four equations yields k cosα ≥ (2/7)sinα, i.e. k ≥ (2/7)tanα.
(b) Solving (1) and (2): wc = (5/7)g sinα. As the sphere starts at t = 0 along the positive x-axis, for pure rolling vc(t) = wct = (5/7)g sinα t. (5)
Hence the sought kinetic energy T = ½mvc2 + ½(2/5)mR2ω2 = (7/10)mvc2 (as ω = vc/R) = (7/10)m((5/7)g sinα t)2 = (5/14)mg2sin2α t2.
Teacher's Note: Static friction needed is (2/7)mg sinα; it must not exceed kmg cosα.
Exam Note: Condition k ≥ (2/7)tanα; T = (7/10)mv².
Question 253. A uniform cylinder of mass m = 8.0 kg and radius R = 1.3 cm (Fig. 1.60) starts descending at a moment t = 0 due to gravity. Neglecting the mass of the thread, find: (a) the tension of each thread and the angular acceleration of the cylinder; (b) the time dependence of the instantaneous power developed by the gravitational force.
Solution. Corrected: the printed first value of β reads 2g/5R; the correct value, as in the later line and the numerical result, is 2g/(3R).
(a) Choose the positive directions of x and φ as in the figure. The equation of motion of the cylinder axis and the equation of moments in the C.M. frame, Fx = mwc and Nz = Icβz, give: mg − 2T = mwc; 2TR = (mR2/2)β. No slipping of thread on the cylinder: wc = βR.
From these three equations: T = mg/6 = 13 N, β = 2g/(3R) = 5 × 102 rad/s2.
(b) wc = (2/3)g > 0, i.e. in vector form wc = (2/3)g. P = F · v = F · (wct) = mg · ((2/3)gt) = (2/3)mg2t.
Teacher's Note: Two threads share the weight with rotation: mg − 2T = mw and 2TR = Iβ, giving a = 2g/3.
Exam Note: Use w = βR; power = force × velocity.
Question 254. Thin threads are tightly wound on the ends of a uniform solid cylinder of mass m. The free ends of the threads are attached to the ceiling of an elevator car. The car starts going up with an acceleration w0. Find the acceleration w' of the cylinder relative to the car and the force F exerted by the cylinder on the ceiling (through the threads).
Solution. Depict the forces on the cylinder in the frame of the elevator. Newton's second law for a solid in vector form in the (non-inertial) elevator frame gives:
2T + mg + m(−w0) = mw' (1)
The equation of moments in the C.M. frame relative to the cylinder axis, Nz = Icβz: 2TR = (mR2/2)β = (mR2/2)(w'/R) [as the thread does not slip on the cylinder, w' = βR], or T = mw'/4.
As T is directed opposite to w', in vector form T = −mw'/4. (2)
Solving (1) and (2): w' = (2/3)(g − w0) and F = 2T = (1/3)m(g − w0).
In magnitude, since w0 points upward (opposite to g): w' = (2/3)(g + w0) (downward relative to the car) and F = (m/3)(g + w0).
Teacher's Note: In the lift frame add the pseudo-force −mw0, which acts like g becoming g + w0.
Exam Note: Replace g by (g + w0) in the fixed-ceiling result.
Question 255. A spool with a thread wound on it is placed on an inclined smooth plane set at an angle α = 30° to the horizontal. The free end of the thread is attached to the wall as shown in Fig. 1.61. The mass of the spool is m = 200 g, its moment of inertia relative to its own axis I = 0.45 g·m2, the radius of the wound thread layer r = 3.0 cm. Find the acceleration of the spool axis.
Solution. Corrected: the printed numerical value 1.6 m/s2 is wrong; the formula gives 1.4 m/s2.
Choose the positive directions of x and φ as shown in the figure and apply Fx = mwcx and Ncz = Icβz:
mg sinα − T = mw; Tr = Iβ.
If a point of a solid in plane motion is connected with a thread, the projection of the velocity of the solid's point of contact along the thread equals the velocity of the other end of the thread (if not slack). Thus here vP = v0 but v0 = 0, hence the point P (where the thread leaves the spool) is the instantaneous centre of rotation, of zero velocity. Therefore vc = ωr and wc = βr.
Solving: w = g sinα / (1 + I/(mr2)). With I = 0.45 × 10−3 kg·m2, mr2 = 0.2 × (0.03)2 = 1.8 × 10−4 kg·m2: w = 9.8 × 0.5/(1 + 2.5) = 1.4 m/s2.
Teacher's Note: The thread's contact point is the instantaneous axis, so w = βr; convert g·m² to kg·m².
Exam Note: Convert units carefully; I/(mr²) = 2.5.
Question 256. A uniform solid cylinder of mass m rests on two horizontal planks. A thread is wound on the cylinder. The hanging end of the thread is pulled vertically down with a constant force F (Fig. 1.62). Find the maximum magnitude of the force F which still does not bring about any sliding of the cylinder, if the coefficient of friction between the cylinder and the planks is equal to k. What is the acceleration wmax of the axis of the cylinder in that case?
Solution. Sketch the force diagram for the solid cylinder (normal reactions N1, N2 and friction forces fr1, fr2 from the planks) and apply Newton's second law along the x and y axes:
fr1 + fr2 = mwc (1); N1 + N2 − mg − F = 0, or N1 + N2 = mg + F (2)
Using Ncz = Icβz: FR − (fr1 + fr2)R = (mR2/2)β = (mR2/2)(wc/R) (3) [for pure rolling wc = βR]. In addition, fr1 + fr2 ≤ k(N1 + N2) (4)
Solving: F ≤ 3kmg/(2 − 3k), i.e. Fmax = 3kmg/(2 − 3k), and
wc(max) = k(N1 + N2)/m = (k/m)[mg + Fmax] = (k/m)[mg + 3kmg/(2 − 3k)] = 2kg/(2 − 3k).
Teacher's Note: Rolling without sliding needs total friction ≤ k(mg + F); (3) links friction and F through w = βR.
Exam Note: Substitute fr = 2F/3 into the friction limit.
Question 257. A spool with thread wound on it, of mass m, rests on a rough horizontal surface. Its moment of inertia relative to its own axis is equal to I = γmR2, where γ is a numerical factor, and R is the outside radius of the spool. The radius of the wound thread layer is equal to r. The spool is pulled without sliding by the thread with a constant force F directed at an angle α to the horizontal (Fig. 1.63). Find: (a) the projection of the acceleration vector of the spool axis on the x-axis; (b) the work performed by the force F during the first t seconds after the beginning of motion.
Solution. (a) Choose the positive direction of the rotation angle φ such that wcx and βz have identical signs. The equations of motion Fx = mwcx and Ncz = Icβz give:
F cosα − fr = mwcx; frR − Fr = Icβz = γmR2βz.
In the absence of slipping, wcx = βzR. From the three equations: wcx = wc = F[cosα − r/R] / (m(1 + γ)), where cosα > r/R. (1)
(b) As the static friction fr does not work on the spool, Aext = ΔT:
Aext = ½mvc2 + ½γmR2(vc2/R2) = ½m(1 + γ)vc2 = ½m(1 + γ)2wcx = ½m(1 + γ)2wc(½wct2) = F2(cosα − r/R)2t2 / (2m(1 + γ)).
Note that at cosα = r/R there is no rolling, and for cosα < r/R, wc < 0, i.e. the spool moves towards the negative x-axis and rotates in the anticlockwise sense.
Teacher's Note: Static friction does no work, so the work of F equals the kinetic energy gained, translational plus rotational.
Exam Note: Friction does no work; A = ½m(1+γ)v².
Question 258. The arrangement shown in Fig. 1.64 consists of two identical uniform solid cylinders, each of mass m, on which two light threads are wound symmetrically. Find the tension of each thread in the process of motion. The friction in the axle of the upper cylinder is assumed to be absent.
Solution. For the upper cylinder, from Nz = Iβz about its stationary axis of rotation: 2Tr = (mr2/2)β, or β = 4T/(mr). (1)
For the rotation of the lower cylinder, Ncz = Icβz: 2Tr = (mr2/2)β', or β' = 4T/(mr) = β.
For the translational motion of the lower cylinder, Fx = mwcx: mg − 2T = mwc. (2)
As there is no slipping of the threads on the cylinders: wc = β'r + βr = 2βr. (3)
Simultaneous solution of (1), (2) and (3) yields T = mg/10.
Teacher's Note: Lower cylinder falls by unwinding from the upper one: its acceleration is the sum of both rotations, 2βr.
Exam Note: w = 2βr with β = 4T/(mr); solve to mg/10.
Question 259. In the arrangement shown in Fig. 1.65 a weight A possesses mass m, a pulley B possesses mass M. Also known are the moment of inertia I of the pulley relative to its axis and the radii of the pulley R and 2R. The mass of the threads is negligible. Find the acceleration of the weight A after the system is set free.
Solution. Depict the forces on the pulley and the weight A, and indicate the positive directions of x and φ as in the figure. For the pulley, Fx = Mwcx and Ncz = Icβz give:
Mg + TA − 2T = Mwc (1); 2TR + TA(2R) = Iβ = Iwc/R (2)
For the weight A, Fx = mwx: mg − TA = mwA (3)
As there is no slipping of the threads on the pulley: wA = wc + 2βR = wc + 2wc = 3wc (4)
Simultaneous solution of the four equations gives wA = 3(M + 3m)g / (M + 9m + I/R2).
Teacher's Note: The pulley rolls down the two threads: wA = wc + 2βR = 3wc; combine force and torque equations.
Exam Note: Write four equations; eliminate T and TA.
JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 5 Dynamics Of A Solid Body Part 1
Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 5 Dynamics Of A Solid Body Part 1
Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 5 Dynamics Of A Solid Body Part 1. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.