IE Irodov Solutions Chapter 14 Phase Transformations

Download JEE Physics IE Irodov Textbook Solutions: Chapter 14 Phase Transformations

Access comprehensive textbook solutions for Chapter 14 Phase Transformations using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Access IE Irodov Textbook Answers and Solutions

View or download the dedicated Chapter 14 Phase Transformations solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Chapter 14 Phase Transformations - Questions 185-219

Phase Transformations (Part 1)

Question 185. A saturated water vapour is contained in a cylindrical vessel under a weightless piston at a temperature t = 100°C. As a result of a slow introduction of the piston a small fraction of the vapour Δm = 0.70 g gets condensed. What amount of work was performed over the gas? The vapour is assumed to be ideal, the volume of the liquid is to be neglected.

Solution. The condensation takes place at constant pressure and temperature, so the work done is pΔV, where ΔV is the volume of the condensed vapour in the vapour phase. Using the ideal gas law, pΔV = (Δm/M)RT = (0.70/18) × 8.31 × 373 = 120.6 J, where M = 18 g/mol is the molar mass of water.

Teacher's Note: Condensation at constant p and T: work equals pΔV, and ideal-gas law converts it to (Δm/M)RT.

Exam Note: Write W = pΔV, substitute pΔV = (Δm/M)RT; keep M in g/mol.

Question 186. A vessel of volume V = 6.0 l contains water together with its saturated vapour under a pressure of 40 atm and at a temperature of 250°C. The specific volume of the vapour is equal to V'v = 50 l/kg under these conditions. The total mass of the system water-vapour equals m = 5.0 kg. Find the mass and the volume of the vapour.

Solution. Let V'l be the specific volume of the liquid (about 1 l/kg for water); since V'v ≫ V'l, most of the mass is liquid. Let ml and mv be the masses of liquid and vapour. Then m = ml + mv and V = mlV'l + mvV'v, so V − mV'l = mv(V'v − V'l).
Hence mv = (V − mV'l)/(V'v − V'l) = 20 g, and the volume of the vapour is mvV'v = 1.0 l.

Teacher's Note: Two equations (total mass, total volume) with two unknown masses; liquid volume per kg is small.

Exam Note: Write both conservation equations first; state V'l ≈ 1 l/kg.

Question 187. The saturated water vapour is enclosed in a cylinder under a piston and occupies a volume V0 = 5.0 l at the temperature t = 100°C. Find the mass of the liquid phase formed after the volume under the piston decreased isothermally to V = 1.6 l. The saturated vapour is assumed to be ideal.

Solution. At T = 373 K the vapour pressure stays constant (atmospheric, p) while it condenses. The condensed liquid originally occupied V0 − V as vapour, so p(V0 − V) = (m/M)RT, giving m = Mp(V0 − V)/(RT) = 2 g.

Teacher's Note: Saturated vapour pressure stays fixed during compression, so only the lost volume condenses.

Exam Note: Use p(V0 − V) = (m/M)RT with p = 1 atm.

Question 188. A volume occupied by a saturated vapour is reduced isothermally n-fold. Find what fraction η of the final volume is occupied by the liquid phase if the specific volumes of the saturated vapour and the liquid phase differ by N times (N > n). Solve the same problem under the condition that the final volume of the substance corresponds to the midpoint of a horizontal portion of the isothermal line in the diagram p, V.

Solution. Let V'l be the specific volume of the liquid and V'v = NV'l that of the vapour. Let V be the original volume of the vapour. Then the total mass is Mtot = ml + mv = V/(NV'l), so V/n = (ml + Nmv)V'l for the final volume V/n.
Therefore (N − 1)mlV'l = V(1 − 1/n) = (V/n)(n − 1), and η = mlV'l/(V/n) = (n − 1)/(N − 1).
If the final volume is the midpoint of the horizontal portion of the isotherm, half of the mass is liquid and the volume per unit mass is (1 + N)V'l/2, of which the liquid takes V'l/2. Thus η = 1/(1 + N).

Teacher's Note: Lever-rule type mass balance: liquid volume fraction from total mass and total volume.

Exam Note: Define specific volumes, form mass and volume balances, then divide.

Question 189. An amount of water of mass m = 1.00 kg, boiling at standard atmospheric pressure, turns completely into saturated vapour. Assuming the saturated vapour to be an ideal gas find the increment of entropy and internal energy of the system.

Solution. From the first law of thermodynamics, ΔU + A = Q = mq, where q is the specific latent heat of vaporization (q = 2.25 × 106 J/kg). The work done is A = p(V'v − V'l)m ≈ mRT/M. Thus ΔU = m(q − RT/M) ≈ 2.08 × 106 J.
Corrected (entropy part was missing in the book): the entropy increment is ΔS = mq/T = 2.25 × 106/373 ≈ 6.0 × 103 J/K = 6.0 kJ/K.

Teacher's Note: Isothermal phase change: ΔS = Q/T; ΔU is latent heat minus expansion work.

Exam Note: Give both ΔS = mq/T and ΔU = m(q − RT/M).

Question 190. Water of mass m = 20 g is enclosed in a thermally insulated cylinder at the temperature of 0°C under a weightless piston whose area is S = 410 cm2. The outside pressure is equal to standard atmospheric pressure. To what height will the piston rise when the water absorbs Q = 20.0 kJ of heat?

Solution. Part of the heat heats the water to the boiling temperature T = 373 K; the remaining heat is Q − mcΔT (c = specific heat of water, ΔT = 100 K) and is used to create vapour. If the piston rises to height h, the vapour volume is ≈ Sh (neglecting the water). Its mass is (p0Sh/RT)M, so the heat of vaporization is p0ShMq/(RT). To this must be added the work done in creating the saturated vapour, p0Sh. Thus
Q − mcΔT = p0Sh(1 + qM/(RT)), so h = (Q − mcΔT)/[p0S(1 + qM/(RT))] = 20 cm.

Teacher's Note: Split heat into warming to 100°C, latent heat of the vapour formed, and expansion work.

Exam Note: Subtract heating heat first; include both latent heat and p0Sh.

Question 191. One gram of saturated water vapour is enclosed in a thermally insulated cylinder under a weightless piston. The outside pressure being standard, m = 1.0 g of water is introduced into the cylinder at a temperature t0 = 22°C. Neglecting the heat capacity of the cylinder and the friction of the piston against the cylinder's walls, find the work performed by the force of the atmospheric pressure during the lowering of the piston.

Solution. A quantity mc(T − T0)/q of saturated vapour must condense to heat the water to the boiling point T = 373 K (c = specific heat of water, T0 = 295 K is the initial water temperature). The work done per unit mass of the condensed vapour is pV = RT/M, so the work done in lowering the piston is
[mc(T − T0)/q] × RT/M ≈ 25 J.

Teacher's Note: Condensing vapour supplies the heat to warm the water; work equals pV of the condensed part.

Exam Note: Find condensed mass from heat balance, then multiply by RT/M.

Question 192. If an additional pressure Δp of a saturated vapour over a convex spherical surface of a liquid is considerably less than the vapour pressure over a plane surface, then Δp = (ρv/ρl)(2α/r), where ρv and ρl are the densities of the vapour and the liquid, α is the surface tension, and r is the radius of curvature of the surface. Using this formula, find the diameter of water droplets at which the saturated vapour pressure exceeds the vapour pressure over the plane surface by η = 1.0% at a temperature t = 27°C. The vapour is assumed to be an ideal gas.

Solution. Given Δp = (ρv/ρl)(2α/r) = (ρv/ρl)(4α/d) = ηpvap = η(m/M)RT/Vvap = ηρvRT/M. Hence d = 4αM/(ρlRTη). For water α = 73 dyn/cm = 0.073 N/m, M = 18 g/mol, ρl = 1 g/cm3, T = 300 K and η = 0.01, we get d ≈ 0.2 μm.

Teacher's Note: ρv cancels once p = ρvRT/M is used; d depends on α, M, T.

Exam Note: Replace pvap by ρvRT/M; convert dyn/cm to N/m.

Question 193. Find the mass of all molecules leaving one square centimetre of water surface per second into a saturated water vapour above it at a temperature t = 100°C. It is assumed that η = 3.6% of all water vapour molecules falling on the water surface are retained in the liquid phase.

Solution. In equilibrium the number of molecules evaporating equals the number of vapour molecules condensing. By kinetic theory, the number of vapour molecules hitting unit area per second is (1/4)n⟨v⟩, and the number retained is η(1/4)n⟨v⟩ = η(1/4)n√(8kT/(πm)). The mass leaving per unit area per second is therefore μ = mηn√(kT/(2πm)) = ηp0√(M/(2πRT)) ≈ 0.35 g/(cm2·s), where p0 = nkT is atmospheric pressure (saturated vapour at 100°C), T = 373 K and M = 18 g/mol.

Teacher's Note: Evaporation rate equals the condensation rate; use molecular flux (1/4)n⟨v⟩ times η.

Exam Note: Quote flux (1/4)n⟨v⟩ and note p = nkT; check units g/(cm2·s).

Question 194. Find the pressure of saturated tungsten vapour at a temperature T = 2000 K if a tungsten filament is known to lose a mass μ = 1.2 × 10−13 g/(s·cm2) from a unit area per unit time when evaporating into high vacuum at this temperature.

Solution. Here we must assume that μ is also the rate at which the tungsten filament loses mass when in an atmosphere of its own vapour at this temperature, and that η (of the previous problem) ≈ 1. Then p = μ√(2πRT/M) ≈ 0.9 nPa, where p is the pressure of the saturated vapour (from the result of the previous problem).

Teacher's Note: Reverse of the previous problem: with η ≈ 1, evaporation rate fixes vapour pressure.

Exam Note: Take η = 1, invert μ = p√(M/2πRT); convert g/(s·cm2) to SI.

Question 195. By what magnitude would the pressure exerted by water on the walls of the vessel have increased if the intermolecular attraction forces had vanished?

Solution. From the Van der Waals equation, p = RT/(V − b) − a/V2, where V is the volume of one mole of the substance. For water V = 18 cm3/mol = 1.8 × 10−2 l/mol and a = 5.47 atm·l2/mol2. If molecular attraction vanished the equation would be p' = RT/(V − b) for the same specific volume. Thus Δp = a/V2 = 5.47/(1.8 × 10−2)2 ≈ 1.7 × 104 atm.

Teacher's Note: Removing the attraction term −a/V2 raises pressure by exactly a/V2.

Exam Note: Convert molar volume to litres; answer in atm is acceptable.

Question 196. Find the internal pressure pi of a liquid if its density ρ and specific latent heat of vaporization q are known. The heat q is assumed to be equal to the work performed against the forces of the internal pressure, and the liquid obeys the Van der Waals equation. Calculate pi in water.

Solution. The internal pressure is a/V2, so the work done in vaporization (reverse of condensation) per mole is ∫VlVg (a/V2) dV = a/Vl − a/Vg ≈ a/Vl. By assumption this equals Mq, M being the molar mass and Vl, Vg the molar volumes of the liquid and gas. Thus pi = a/Vl2 = Mq/Vl = ρq, where ρ is the density of the liquid.
Corrected: for water the book prints 3.3 × 1013 atm, which is wrong. With ρ = 1.0 × 103 kg/m3 and q = 2.25 × 106 J/kg, pi = ρq ≈ 2.25 × 109 Pa ≈ 2.2 × 104 atm (about 2 GPa, consistent with the result of Q195).

Teacher's Note: Vaporization heat per mole equals a/Vl; dividing by Vl gives pi = ρq.

Exam Note: Show the integral, final pi = ρq, then substitute SI values.

Question 197. Demonstrate that Eqs. (2.6a) and (2.6b) (Vcr = 3b, pcr = a/(27b2), Tcr = 8a/(27Rb)) are valid for a substance obeying the Van der Waals equation, in critical state. Instruction. Make use of the fact that the critical state corresponds to the point of inflection in the isothermal curve p(V).

Solution. The Van der Waals equation for one mole is p(V) = RT/(V − b) − a/V2. At the critical point (∂p/∂V)T and (∂2p/∂V2)T vanish. Thus
0 = −RT/(V − b)2 + 2a/V3, i.e. RT/(V − b)2 = 2a/V3,
0 = 2RT/(V − b)3 − 6a/V4, i.e. RT/(V − b)3 = 3a/V4.
Dividing, V − b = (2/3)V, so V = 3b = VM,cr, the critical molar volume. Putting this back, RTcr/(4b2) = 2a/(27b3), so Tcr = 8a/(27bR). Finally pcr = RTcr/(VM,cr − b) − a/VM,cr2 = 4a/(27b2) − a/(9b2) = a/(27b2). From these, pcrVM,cr/(RTcr) = (a/9b)/(8a/27b) = 3/8.

Teacher's Note: Critical point is an inflection with zero slope: set first and second derivatives to zero.

Exam Note: Set both derivatives to zero, divide the equations, back-substitute.

Question 198. Calculate the Van der Waals constants for carbon dioxide if its critical temperature Tcr = 304 K and critical pressure pcr = 73 atm.

Solution. From the previous problem, pcr/(RTcr) = [a/(27b2)]/[8a/(27b)] = 1/(8b). Thus b = RTcr/(8pcr) = 0.082 × 304/(73 × 8) ≈ 0.043 l/mol. And (RTcr)2/pcr = 64a/27, so a = (27/64)(RTcr)2/pcr ≈ 3.59 atm·l2/mol2.

Teacher's Note: Two critical-point relations give b and a directly from Tcr and pcr.

Exam Note: Use R = 0.082 l·atm/(mol·K) with p in atm.

Question 199. Find the specific volume of benzene (C6H6) in critical state if its critical temperature Tcr = 562 K and critical pressure pcr = 47 atm.

Solution. Specific volume is molar volume divided by molar mass. Thus V'cr = VM,cr/M = 3RTcr/(8Mpcr) = 3 × 0.082 × 562/(8 × 78 × 47) l/g ≈ 4.71 cm3/g.

Teacher's Note: Use Vcr = 3RTcr/(8pcr) per mole, then divide by M = 78 g/mol.

Exam Note: Compute M of C6H6 = 78; convert l/g to cm3/g.

Question 200. Write the Van der Waals equation via the reduced parameters π, v, and τ, having taken the corresponding critical values for the units of pressure, volume, and temperature. Using the equation obtained, find how many times the gas temperature exceeds its critical temperature if the gas pressure is 12 times as high as critical pressure, and the volume of gas is equal to half the critical volume.

Solution. (p + a/Vm2)(Vm − b) = RT. Dividing by pcrVM,cr and using pcrVM,cr = (3/8)RTcr: (π + a/(pcrVm2))(v − b/VM,cr) = (8/3)τ, where π = p/pcr, v = Vm/VM,cr, τ = T/Tcr. Since a/(pcrVM,cr2) = 3 and b/VM,cr = 1/3:
(π + 3/v2)(v − 1/3) = (8/3)τ.
When π = 12 and v = 1/2: τ = (3/8)(12 + 12)(1/2 − 1/3) = (3/8) × 24 × (1/6) = 3/2. The gas temperature is 1.5 times the critical temperature.

Teacher's Note: Reduced variables remove a and b; law of corresponding states.

Exam Note: Quote (π + 3/v2)(v − 1/3) = 8τ/3 and substitute carefully.

Question 201. Knowing the Van der Waals constants, find: (a) the maximum volume which water of mass m = 1.00 kg can occupy in liquid state; (b) the maximum pressure of the saturated water vapour.

Solution. (a) The critical volume VM,cr is the maximum volume in the liquid phase and the minimum in the gaseous phase. With b = 0.030 l/mol for water, Vmax = (1000/18) × 3 × 0.030 l ≈ 5 l.
(b) The critical pressure is the maximum possible pressure of the vapour in equilibrium with the liquid phase. With a = 5.47 atm·l2/mol2: pmax = a/(27b2) = 5.47/(27 × 0.030 × 0.030) ≈ 225 atm.

Teacher's Note: Liquid is largest and vapour pressure highest exactly at the critical state.

Exam Note: Use Vcr = 3b per mole; pcr = a/27b2.

Question 202. Calculate the temperature and density of carbon dioxide in critical state, assuming the gas to be a Van der Waals one.

Solution. With a = 3.62 atm·l2/mol2, b = 0.043 l/mol and R = 0.082 l·atm/(mol·K): Tcr = (8/27)(a/(bR)) = (8/27) × 3.62/(0.043 × 0.082) ≈ 304 K. ρcr = M/(3b) = 44/(3 × 43) g/cm3 ≈ 0.34 g/cm3.

Teacher's Note: Critical density is molar mass over critical molar volume 3b.

Exam Note: Keep units of b consistent (l/mol → 43 cm3/mol).

Phase Transformations (Part 2)

Question 203. What fraction of the volume of a vessel must liquid ether occupy at room temperature in order to pass into critical state when critical temperature is reached? Ether has Tcr = 467 K, pcr = 35.5 atm, M = 74 g/mol.

Solution. The vessel is such that either vapour or liquid of mass m occupies it at the critical point. Then its volume is Vcr = (m/M)VM,cr = (3/8)(RTcr/pcr)(m/M). The corresponding volume in liquid phase at room temperature is V = m/ρ, where ρ = 720 g/l is the density of liquid ether at room temperature. Thus η = V/Vcr = 8Mpcr/(3RTcrρ) ≈ 0.254.

Teacher's Note: Liquid mass must fill exactly the critical volume of the vessel.

Exam Note: Equate m/ρ ratio to critical volume; use consistent SI units.

Question 204. Demonstrate that the straight line 1-5 corresponding to the isothermal-isobaric phase transition cuts the Van der Waals isotherm so that areas I and II are equal (Fig. 2.5).

Solution.

pV13245IIIFig. 2.5
We apply the relation (T = constant) T∮dS = ∮dU + ∮p dV to the cycle 1234531. Here ∮dS = ∮dU = 0 (S and U are functions of state), so ∮p dV = 0. This implies that the areas I and II are equal.
This reasoning is inapplicable to the cycle 1231, for example. This cycle is irreversible because it involves the irreversible transition from a single phase to a two-phase state at the point 3.

Teacher's Note: Cycle 1-2-3-4-5-3-1 is reversible and isothermal, so net work is zero: Maxwell construction.

Exam Note: State why the cycle is reversible; cycle 1231 is not.

Question 205. What fraction of water supercooled down to the temperature t = −20°C under standard pressure turns into ice when the system passes into the equilibrium state? At what temperature of the supercooled water does it turn into ice completely?

Solution. When a portion of supercooled water turns into ice some heat is liberated, which should heat the mixture up to the ice point (0°C). Neglecting the variation of specific heat of water, the fraction of water turning into ice is f = c|t|/q ≈ 0.25, where c = 4.18 J/(g·K) is the specific heat of water and q ≈ 333 J/g is the latent heat of fusion of ice. Clearly f = 1 at t = −80°C.

Teacher's Note: Freezing heat q·f only warms the whole mass back to 0°C.

Exam Note: Equate latent heat released to c|t| of the whole mass.

Question 206. Find the increment of the ice melting temperature in the vicinity of 0°C when the pressure is increased by Δp = 1.00 atm. The specific volume of ice exceeds that of water by ΔV' = 0.091 cm3/g.

Solution. From the Clausius–Clapeyron equation dT/dp = T(V'2 − V'1)/q12, where q12 is the specific latent heat absorbed in the transition 1 → 2 (1 = solid, 2 = liquid), ΔT = T(V'w − V'ice)Δp/q12 = −(273 × 0.091/333) × 1 atm·cm3·K/J. Since 1 atm·cm3 ≈ 0.1 J, ΔT ≈ −0.0075 K.

Teacher's Note: Water is denser than ice, so more pressure lowers the melting point.

Exam Note: Sign matters: V'water < V'ice gives negative ΔT.

Question 207. Find the specific volume of saturated water vapour under standard pressure if a decrease of pressure by Δp = 3.2 kPa is known to decrease the water boiling temperature by ΔT = 0.9 K.

Solution. Here 1 = liquid, 2 = steam. From Clausius–Clapeyron, ΔT = T(V's − V'liq)Δp/q12 ≈ TV'sΔp/q12, or V's ≈ (q12/T)(ΔT/Δp) = (2250/373) × (0.9/3.2) × 10−3 m3/g ≈ 1.7 m3/kg.

Teacher's Note: Rearranged Clapeyron equation gives vapour specific volume from measured dT/dp.

Exam Note: Neglect V'liq; convert kPa and J/g carefully.

Question 208. Assuming the saturated water vapour to be ideal, find its pressure at the temperature 101.1°C.

Solution. From the Clausius–Clapeyron equation, dp/dT = q12/(T(V'2 − V'1)) ≈ q12/(TV'2). For an ideal gas 1/V'2 = Mp/(RT), so Δp = (Mq/(RT2))pΔT, and p = p0(1 + MqΔT/(RT2)) ≈ 1.04 atm.

Teacher's Note: Small ΔT: linearise Clapeyron with ideal-gas vapour density.

Exam Note: Take ΔT = 1.1 K, T = 373 K.

Question 209. A small amount of water and its saturated vapour are enclosed in a vessel at a temperature t = 100°C. How much (in per cent) will the mass of the saturated vapour increase if the temperature of the system goes up by ΔT = 1.5 K? Assume that the vapour is an ideal gas and the specific volume of water is negligible as compared to that of vapour.

Solution. From the Clausius–Clapeyron equation, neglecting the volume of the liquid, dp/dT = q/(TV'2) = Mq p/(RT2), or dp/p = (Mq/(RT))(dT/T). For a perfect gas pV = (m/M)RT, so m = MpV/(RT), and with V constant dm/m = dp/p − dT/T = (Mq/(RT) − 1)dT/T = (18 × 2250/(8.3 × 373) − 1) × (1.5/373) ≈ 4.85 %.

Teacher's Note: Vessel volume is fixed: mass change follows from both p and T rising.

Exam Note: Combine dp/p from Clapeyron with dm/m = dp/p − dT/T.

Question 210. Find the pressure of saturated vapour as a function of temperature p(T) if at a temperature T0 its pressure equals p0. Assume that: the specific latent heat of vaporization q is independent of T, the specific volume of liquid is negligible as compared to that of vapour, saturated vapour obeys the equation of state for an ideal gas. Investigate under what conditions these assumptions are permissible.

Solution. From the Clausius–Clapeyron equation, dp/dT = q/(TV'2) ≈ Mqp/(RT2). Integrating, ln p = constant − Mq/(RT). So p = p0 exp[(Mq/R)(1/T0 − 1/T)]. This is reasonable for |T − T0| ≪ T0 and far below the critical temperature.

Teacher's Note: Integrate dp/p = (Mq/R)dT/T2: exponential vapour-pressure law.

Exam Note: Mention validity: small temperature range, far from critical point.

Question 211. An ice which was initially under standard conditions was compressed up to the pressure p = 640 atm. Assuming the lowering of the ice melting temperature to be a linear function of pressure under the given conditions, find what fraction of the ice melted. The specific volume of water is less than that of ice by ΔV' = 0.09 cm3/g.

Solution. As before (Q206) the lowering of the melting point is given by ΔT = −TΔV'p/q (≈ −4.8 K at 640 atm). The ice, still at 0°C, is then superheated relative to its new melting point, so it melts in part until the heat absorbed cools it to the new melting point. The fraction that melts is η = cΔT/q = cTΔV'p/q2 ≈ 0.03, where c ≈ 2.09 J/(g·K) is the specific heat of ice.

Teacher's Note: Ice at 0°C sits above its lowered melting point and melts to cool itself.

Exam Note: Use c of ice, not of water; fraction is about 3%.

Question 212. In the vicinity of the triple point the saturated vapour pressure p of carbon dioxide depends on temperature T as log p = a − b/T, where a and b are constants. If p is expressed in atmospheres, then for the sublimation process a = 9.05 and b = 1.80 kK, and for the vaporization process a = 6.78 and b = 1.31 kK. Find: (a) temperature and pressure at the triple point; (b) the values of the specific latent heats of sublimation, vaporization, and melting in the vicinity of the triple point.

Solution. (a) The transition lines are log p = 9.05 − 1800/T (solid–gas) and log p = 6.78 − 1310/T (liquid–gas). At the triple point they intersect: 2.27 = 490/Ttr, so Ttr = 490/2.27 ≈ 216 K. The corresponding pressure is ptr ≈ 5.14 atm.
(b) In the formula log p = a − b/T compare b with the corresponding term in the equation of Q210: ln p = 2.303a − 2.303b/T, so 2.303b = Mq/R. Then qsublimation = 2.303 × 1800 × 8.31/44 ≈ 783 J/g and qliquid–gas = 2.303 × 1310 × 8.31/44 ≈ 570 J/g. Finally qsolid–liquid = 783 − 570 = 213 J/g on subtraction.

Teacher's Note: Triple point is where the two vapour-pressure lines meet; slopes give latent heats.

Exam Note: Convert log10 to ln (factor 2.303); qmelt = qsub − qvap.

Question 213. Water of mass m = 1.00 kg is heated from the temperature t1 = 10°C up to t2 = 100°C at which it evaporates completely. Find the entropy increment of the system.

Solution. ΔS = ∫T1T2 mc dT/T + mq/T2 = m(c ln(T2/T1) + q/T2) = 103(4.18 ln(373/283) + 2250/373) ≈ 7.2 kJ/K.

Teacher's Note: Entropy adds heating term c ln(T2/T1) and isothermal latent term q/T2.

Exam Note: Use absolute temperatures; add heating and vaporization terms.

Question 214. The ice with the initial temperature t1 = 0°C was first melted, then heated to the temperature t2 = 100°C and evaporated. Find the increment of the system's specific entropy.

Solution. Δs = qm/T1 + c ln(T2/T1) + qv/T2 = 333/273 + 4.18 ln(373/273) + 2250/373 ≈ 8.56 J/(g·K).

Teacher's Note: Three steps: melting at 273 K, heating 273 K to 373 K, boiling at 373 K.

Exam Note: Here T1 = 273 K (not 283 K); unit is J/(g·K).

Question 215. A piece of copper of mass m = 90 g at a temperature t1 = 90°C was placed in a calorimeter in which ice of mass 50 g was at a temperature −3°C. Find the entropy increment of the piece of copper by the moment the thermal equilibrium is reached.

Solution. c = specific heat of copper ≈ 0.39 J/(g·K). Suppose all ice does not melt. Then the heat rejected by copper (cooling to 0°C) = 90 × 0.39 × (90 − 0) = 3159 J, and the heat gained by ice = 50 × 2.09 × 3 + x × 333, where x is the mass of ice melted. Thus x ≈ 8.5 g. The hypothesis is correct and the final temperature will be T = 273 K. Hence the change in entropy of the copper piece is mc ln(273/363) ≈ −10 J/K.

Teacher's Note: Test whether all ice melts first; the final temperature is then 0°C.

Exam Note: Check x < 50 g, then ΔS = mc ln(Tf/Ti).

Question 216. A chunk of ice of mass m1 = 100 g at a temperature t1 = 0°C was placed in a calorimeter in which water of mass m2 = 100 g was at a temperature t2. Assuming the heat capacity of the calorimeter to be negligible, find the entropy increment of the system by the moment the thermal equilibrium is reached. Consider two cases: (a) t2 = 60°C; (b) t2 = 94°C.

Solution. (a) Here m1qm = 33300 J exceeds m2c(60 K) = 25080 J, so the final temperature is 0°C and only some ice melts: 100 × 4.18 × 60 = m'1 × 333, so m'1 ≈ 75.3 g is the amount of ice that melts. Then ΔS = m'1qm/T1 + m2c ln(T1/T2) = m2c[(T2 − T1)/T1 − ln(T2/T1)] ≈ 8.8 J/K (8.75 J/K without rounding).
(b) Now m2ct2 > m1qm, so all the ice melts and the final temperature follows from m2c(T2 − T) = m1qm + m1c(T − T1): T = (m2T2 + m1T1 − m1qm/c)/(m1 + m2) ≈ 280 K. Then ΔS = m1qm/T1 + c(m1 ln(T/T1) − m2 ln(T2/T)).
Corrected: evaluating this gives 121.98 + 10.88 − 112.82 ≈ 20 J/K (the book prints 19 J/K).

Teacher's Note: First decide whether all ice melts by comparing m2c·ΔT with m1q; then add entropy of each part.

Exam Note: Decide the case first; use kelvin in logarithms.

Question 217. Molten lead of mass m = 5.0 g at a temperature t2 = 327°C (the melting temperature of lead) was poured into a calorimeter packed with a large amount of ice at a temperature t1 = 0°C. Find the entropy increment of the system lead-ice by the moment the thermal equilibrium is reached. The specific latent heat of melting of lead is equal to q = 22.5 J/g and its specific heat capacity is equal to c = 0.125 J/(g·K).

Solution. ΔS = −mq/T2 − mc ln(T2/T1) + Qice/T1, where the heat absorbed by the (large amount of) ice at T1 is Qice = m(q + c(T2 − T1)). Hence ΔS = mq(1/T1 − 1/T2) + mc(T2/T1 − 1 − ln(T2/T1)) = 0.2245 + 0.2564 ≈ 0.48 J/K.

Teacher's Note: Lead solidifies and cools to 273 K; the large ice bath stays at 273 K.

Exam Note: Ice bath absorbs all heat at constant T1; combine entropy terms.

Question 218. A water vapour filling the space under the piston of a cylinder, is compressed (or expanded) so that it remains saturated all the time, being just on the verge of condensation. Find the molar heat capacity C of the vapour in this process as a function of temperature T, assuming the vapour to be an ideal gas and neglecting the specific volume of water in comparison with that of vapour. Calculate C at a temperature t = 100°C.

Solution. When heat dQ is given to the vapour its temperature changes by dT, pressure by dp and volume by dV', it being assumed that the vapour remains saturated. By the Clausius–Clapeyron equation dp/dT = q/(TV') (V'vapour ≫ V'liq), or dp = (q/(TV'))dT. Also pV' = RT/M, so p dV' + V'dp = (R/M)dT, hence p dV' = (R/M − q/T)dT. Finally dQ = C dT = dU + p dV' = CVdT + (R/M − q/T)dT = CpdT − (q/T)dT (Cp, CV per unit mass here). Thus C = Cp − q/T. For water vapour Cp = (Rγ/(γ − 1))(1/M) with γ = 1.32 and M = 18, so Cp ≈ 1.90 J/(g·K) and C ≈ −4.13 J/(g·K) ≈ −74 J/(mol·K).

Teacher's Note: Saturated vapour must lose heat when heated: C = Cp − q/T is negative.

Exam Note: Quote C = Cp − q/T; negative sign is physical.

Question 219. One mole of water being in equilibrium with a negligible amount of its saturated vapour at a temperature T1 was completely converted into saturated vapour at a temperature T2. Find the entropy increment of the system. The vapour is assumed to be an ideal gas, the specific volume of the liquid is assumed to be negligible in comparison with that of the vapour.

Solution. The required entropy change can be calculated along a process in which the water is heated from T1 to T2 and then allowed to evaporate at T2. The entropy change for this is ΔS = Cp ln(T2/T1) + qM/T2, where Cp is the molar heat capacity of the liquid water and q is the specific latent heat of vaporization (at T2).

Teacher's Note: Entropy is a state function: heat the liquid, then vaporize at T2.

Exam Note: Choose a convenient reversible path; add heating and vaporization terms.

IE Irodov Solutions for JEE Mathematics: IE Irodov Solutions Chapter 14 Phase Transformations

Complete Math Solutions for IE Irodov Solutions Chapter 14 Phase Transformations

Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 14 Phase Transformations PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for JEE Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.