Official IE Irodov Textbook Solutions: JEE Physics Chapter 15 Transport Phenomena
Access comprehensive textbook solutions for Chapter 15 Transport Phenomena using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Physics: Chapter 15 Transport Phenomena
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Transport Phenomena - Questions 220 to 257
Transport Phenomena (Part 1)
Question 220. Calculate what fraction of gas molecules (a) traverses without collisions the distances exceeding the mean free path λ; (b) has the free path values lying within the interval from λ to 2λ.
Solution.
(a) The fraction of molecules which traverse distances exceeding the mean free path without collision is the probability of traversing the distance s = λ without collision. Thus P = e−1 = 1/e = 0.37.
(b) This probability is P = e−1 − e−2 = 0.23.
Teacher's Note: Survival probability after path s is e^(−s/λ); a range is a difference of two survivals.
Exam Note: Write e^(−s/λ) first, then subtract.
Question 221. A narrow molecular beam makes its way into a vessel filled with gas under low pressure. Find the mean free path of molecules if the beam intensity decreases η-fold over the distance Δl.
Solution.
From the formula 1/η = e−Δl/λ, i.e. λ = Δl / ln η.
Teacher's Note: Beam intensity falls as e^(−l/λ); take logarithms to isolate λ.
Exam Note: State the attenuation law, then solve.
Question 222. Let αdt be the probability of a gas molecule experiencing a collision during the time interval dt; α is a constant. Find: (a) the probability of a molecule experiencing no collisions during the time interval t; (b) the mean time interval between successive collisions.
Solution.
(a) Let P(t) = probability of no collision in the interval (0, t). Then P(t + dt) = P(t)(1 − α dt), or dP/dt = −αP(t), so P(t) = e−αt, where we have used P(0) = 1.
(b) The mean interval between collisions is also the mean interval of no collision. Then
⟨t⟩ = ∫0∞ t e−αt dt / ∫0∞ e−αt dt = (1/α)·Γ(2)/Γ(1) = 1/α.
Teacher's Note: Build a differential equation from the survival probability; the mean time is a weighted average with P(t).
Exam Note: Show dP/dt = −αP and both integrals.
Question 223. Find the mean free path and the mean time interval between successive collisions of gaseous nitrogen molecules (a) under standard conditions; (b) at temperature t = 0°C and pressure p = 1.0 nPa (such a pressure can be reached by means of contemporary vacuum pumps).
Solution.
(a) λ = 1/(√2 π d² n) = kT/(√2 π d² p) = (1.38×10−23 × 273)/(√2 π (0.37×10−9)² × 105) = 6.2×10−8 m.
τ = λ/⟨v⟩ = (6.2×10−8)/454 s = 0.136 ns.
(b) λ = 6.2×106 m and τ = 1.36×104 s = 3.8 hours.
Teacher's Note: λ = kT/(√2πd²p) so λ ∝ 1/p; τ = λ/⟨v⟩ with ⟨v⟩ = 454 m/s for N₂.
Exam Note: Substitute in SI units; convert pressure from nPa.
Question 224. How many times does the mean free path of nitrogen molecules exceed the mean distance between the molecules under standard conditions?
Solution.
The mean distance between molecules is of the order (22.4×10−3/(6.0×1023))1/3 = (224/6)1/3×10−9 m = 3.34×10−9 m.
This is about 18.5 times smaller than the mean free path calculated in Q. 223 (a) above.
Teacher's Note: Mean spacing is the cube root of volume per molecule, V/N_A.
Exam Note: Compare λ with (V_m/N_A)^(1/3).
Question 225. Find the mean free path of gas molecules under standard conditions if the Van der Waals constant of this gas is equal to b = 40 ml/mol.
Solution.
We know that the Van der Waals constant b is four times the molecular volume (per mole). Thus b = 4NA(π/6)d³, or d = (3b/(2πNA))1/3.
Hence λ = (kT0/(√2 π p0)) · (2πNA/(3b))2/3.
Teacher's Note: Van der Waals b = 4N_A × molecular volume gives the molecular diameter d.
Exam Note: Derive d from b, then use λ = kT/(√2πd²p).
Question 226. An acoustic wave propagates through nitrogen under standard conditions. At what frequency will the wavelength be equal to the mean free path of the gas molecules?
Solution.
The velocity of sound in N2 is √(γp/ρ) = √(γRT/M). The wavelength equals λ, so
λsound = vs/ν = λ, so 1/ν = λ/vs = √(M/(γRT0)) · RT0/(√2 π d² p0 NA)
or ν = π d² p0 NA √(2γ/(M R T0)).
Teacher's Note: Frequency = sound speed / wavelength, with wavelength set equal to λ.
Exam Note: Use v = √(γRT/M) and λ = kT/(√2πd²p).
Question 227. Oxygen is enclosed at the temperature 0°C in a vessel with the characteristic dimension l = 10 mm (this is the linear dimension determining the character of a physical process in question). Find: (a) the gas pressure below which the mean free path of the molecules λ > l; (b) the corresponding molecular concentration and the mean distance between the molecules.
Solution.
(a) λ > l if p < kT/(√2 π d² l). The value of kT/(√2 π d² l) for O2 is 0.7 Pa.
(b) The corresponding n is obtained by dividing by kT and is 1.84×1020 per m³ (= 1.84×1014 per cm³), and the corresponding mean distance is n−1/3 = (1.84×1020)−1/3 m ≈ 1.8×10−7 m = 0.18 μm.
Corrected: the printed working divides l by n1/3; the mean distance is 1/n1/3, which gives the same 0.18 μm.
Teacher's Note: Condition λ > l gives an upper pressure limit; spacing is n^(−1/3), independent of l.
Exam Note: Use n = p/kT, then spacing n^(−1/3).
Question 228. For the case of nitrogen under standard conditions find: (a) the mean number of collisions experienced by each molecule per second; (b) the total number of collisions occurring between the molecules within 1 cm³ of nitrogen per second.
Solution.
(a) ν = 1/τ = 1/(λ/⟨v⟩) = ⟨v⟩/λ = √2 π d² n ⟨v⟩ = 0.74×1010 s−1 (see Q. 223).
(b) The total number of collisions is ½nν ≈ 1.0×1029 s−1 cm−3.
Note the factor ½: when two molecules collide we must not count it twice.
Teacher's Note: Collision rate per molecule is ⟨v⟩/λ; pair collisions total ½nν per unit volume.
Exam Note: Include the factor ½ to avoid double counting.
Question 229. How does the mean free path λ and the number of collisions of each molecule per unit time ν depend on the absolute temperature of an ideal gas undergoing (a) an isochoric process; (b) an isobaric process?
Solution.
(a) λ = 1/(√2 π d² n). d is a constant and n is a constant for an isochoric process, so λ is constant. ν = ⟨v⟩/λ = √(8RT/(Mπ))/λ ∝ √T.
(b) λ = (1/(√2 π d²))·(kT/p) ∝ T for an isobaric process. ν = ⟨v⟩/λ ∝ √T/T = 1/√T for an isobaric process.
Teacher's Note: λ depends only on n and d; ν = ⟨v⟩/λ with ⟨v⟩ ∝ √T.
Exam Note: Express n = p/kT, then read off T-dependence.
Question 230. As a result of some process the pressure of an ideal gas increases n-fold. How many times have the mean free path λ and the number of collisions of each molecule per unit time ν changed and how, if the process is (a) isochoric; (b) isothermal?
Solution.
(a) In an isochoric process λ is constant and ν ∝ √T ∝ √(pV) ∝ √p ∝ √n, so ν increases √n times.
(b) λ = kT/(√2 π d² p) must decrease n times in an isothermal process and ν must increase n times, because ⟨v⟩ is constant in an isothermal process.
Teacher's Note: Isochoric: n fixed so λ fixed. Isothermal: ⟨v⟩ fixed and λ ∝ 1/p.
Exam Note: Use ν = ⟨v⟩/λ in each case.
Question 231. An ideal gas consisting of rigid diatomic molecules goes through an adiabatic process. How do the mean free path λ and the number of collisions of each molecule per second ν depend in this process on (a) the volume V; (b) the pressure p; (c) the temperature T?
Solution.
(a) λ ∝ 1/n = 1/(N/V) = V/N. Thus λ ∝ V and ν ∝ T1/2/V. But in an adiabatic process (γ = 7/5 here) TVγ−1 = constant, so TV2/5 = constant, or T1/2 ∝ V−1/5. Thus ν ∝ V−6/5.
(b) λ ∝ T/p. But p(T/p)γ = constant, or T/p ∝ p−1/γ, or T ∝ p1−1/γ. Thus λ ∝ p−1/γ = p−5/7, and ν = ⟨v⟩/λ ∝ p/√T ∝ p1/2 + 1/(2γ) = p(γ+1)/(2γ) = p6/7.
(c) λ ∝ V, but TV2/5 = constant, or V ∝ T−5/2. Thus λ ∝ T−5/2 and ν ∝ T1/2/V ∝ T3.
Teacher's Note: Combine λ ∝ V/N, ν ∝ √T/λ with the adiabatic relations, γ = 7/5 (rigid diatomic).
Exam Note: Write adiabatic relation in the needed variable first.
Question 232. An ideal gas goes through a polytropic process with exponent n. Find the mean free path and the number of collisions of each molecule per second ν as a function of (a) the volume V; (b) the pressure p; (c) the temperature T.
Solution.
In the polytropic process of index n: pVn = constant, TVn−1 = constant and p1−nTn = constant.
(a) λ ∝ V. ν ∝ T1/2/V ∝ V(1−n)/2V−1 = V−(n+1)/2.
(b) λ ∝ T/p, Tn ∝ pn−1, i.e. T ∝ p1−1/n, so λ ∝ p−1/n. ν = ⟨v⟩/λ ∝ p/√T ∝ p1−1/2+1/(2n) = p(n+1)/(2n).
(c) λ ∝ T/p, p ∝ Tn/(n−1), so λ ∝ T1−n/(n−1) = T−1/(n−1) = T1/(1−n). ν ∝ p/√T ∝ Tn/(n−1)−1/2 = T(n+1)/(2(n−1)).
Corrected: in part (a) the printed final exponent of V for ν is (1−n)/2 (the factor V−1 was not combined); the correct exponent is −(n+1)/2, as written above.
Teacher's Note: Same method as the adiabatic case with γ replaced by n; check n = 7/5 reproduces Q.231.
Exam Note: Verify against the adiabatic special case n = γ.
Question 233. Determine the molar heat capacity of a polytropic process through which an ideal gas consisting of rigid diatomic molecules goes and in which the number of collisions between the molecules remains constant (a) in a unit volume; (b) in the total volume of the gas.
Solution.
(a) The number of collisions between the molecules in a unit volume is ½nν = (1/√2) π d² n² ⟨v⟩ ∝ √T/V². This remains constant in the polytropic process pV−3 = constant.
Using Q. 122, the molar heat capacity for the polytropic process pVα = constant is C = R(1/(γ−1) − 1/(α−1)). Thus with α = −3: C = R(1/(γ−1) + 1/4) = R(5/2 + 1/4) = 11R/4. It can also be written as ¼R(1 + 2i), where i = 5.
(b) In this case √T/V = constant and so pV−1 = constant, so C = R(1/(γ−1) + 1/2) = R(5/2 + 1/2) = 3R. It can also be written as (R/2)(i + 1).
Teacher's Note: Constant collision count fixes T ∝ V^k, giving polytropic index α; then use C = R/(γ−1) − R/(α−1).
Exam Note: Find α first, then substitute in the C formula.
Question 234. An ideal gas of molar mass M is enclosed in a vessel of volume V whose thin walls are kept at a constant temperature T. At a moment t = 0 a small hole of area S is opened, and the gas starts escaping into vacuum. Find the gas concentration n as a function of time t if at the initial moment n(0) = n0.
Solution.
We can assume that all molecules incident on the hole leak out. Then −dN = −d(nV) = ¼ n⟨v⟩S dt, or dn = −n dt/(4V/(S⟨v⟩)) = −n dt/τ, where τ = 4V/(S⟨v⟩).
Integrating, n = n0 e−t/τ, with ⟨v⟩ = √(8RT/(πM)).
Teacher's Note: Molecular flux through a hole is ¼n⟨v⟩ per area; leads to exponential decay.
Exam Note: Quote flux ¼n⟨v⟩S, then integrate.
Question 235. A vessel filled with gas is divided into two equal parts 1 and 2 by a thin heat-insulating partition with two holes. One hole has a small diameter, and the other has a very large diameter (in comparison with the mean free path of molecules). In part 2 the gas is kept at a temperature η times higher than that of part 1. How will the concentration of molecules in part 2 change and how many times after the large hole is closed?
Solution.
If the temperature of compartment 2 is η times more than that of compartment 1, it must contain 1/η times the number of molecules, since pressure must be the same when the big hole is open. If M is the mass of the gas in 1, the mass of the gas in 2 must be M/η. So immediately before the big hole is closed, n10 = M/(mV), n20 = M/(mVη), where m is the mass of each molecule.
After the big hole is closed the pressures will differ and the concentrations become n1 and n2 where n1 + n2 = (M/(mVη))(1 + η). On the other hand n1⟨v1⟩ = n2⟨v2⟩, i.e. n1 = √η n2.
Thus n2(1 + √η) = (M/(mVη))(1 + η) = n20(1 + η), so n2 = n20 (1 + η)/(1 + √η).
The concentration in part 2 therefore changes by the factor (1 + η)/(1 + √η).
Teacher's Note: Open large hole equalises pressure; closed, only the small hole's effusion balance n⟨v⟩ holds.
Exam Note: Use equal pressure first, then n₁⟨v₁⟩ = n₂⟨v₂⟩.
Question 236. As a result of a certain process the viscosity coefficient of an ideal gas increases α = 2.0 times and its diffusion coefficient β = 4.0 times. How does the gas pressure change and how many times?
Solution.
We know η = (1/3)⟨v⟩λρ = (1/3)⟨v⟩ · (1/(√2 π d² n)) · mn ∝ √T. Thus η changing α times implies T changing α² times.
On the other hand D = (1/3)⟨v⟩λ = (1/3)√(8kT/(πm)) · kT/(√2 π d² p) ∝ T3/2/p. Thus D changing β times means T3/2/p changing β times.
So p must change α³/β times, i.e. 2.03/4.0 = 2.0 times (pressure increases 2-fold).
Teacher's Note: η ∝ √T fixes the temperature ratio; D ∝ T^(3/2)/p then fixes pressure.
Exam Note: Find T ratio from η, then p from D.
Question 237. How will a diffusion coefficient D and the viscosity coefficient η of an ideal gas change if its volume increases n times: (a) isothermally; (b) isobarically?
Solution.
D ∝ √T/n ∝ V√T, η ∝ √T.
(a) D will increase n times. η will remain constant if T is constant.
(b) D ∝ T3/2/p ∝ (pV)3/2/p = p1/2V3/2, η ∝ √(pV). Thus D will increase n3/2 times, η will increase n1/2 times, if p is constant.
Teacher's Note: D ∝ √T/n and η ∝ √T; isobaric expansion raises T ∝ V.
Exam Note: Use T ∝ V for isobaric case.
Question 238. An ideal gas consists of rigid diatomic molecules. How will a diffusion coefficient D and viscosity coefficient η change and how many times if the gas volume is decreased adiabatically n = 10 times?
Solution.
D ∝ V√T, η ∝ √T. In an adiabatic process TVγ−1 = constant, or T ∝ V1−γ. Now V is decreased to 1/n times. Thus D ∝ V(3−γ)/2 = (1/n)4/5 and η ∝ V(1−γ)/2 = (1/n)−1/5 = n1/5.
So D decreases n4/5 times (≈ 6.3 times) and η increases n1/5 times (≈ 1.6 times).
Teacher's Note: Use γ = 7/5 for rigid diatomic gas; T ∝ V^(1−γ) feeds D and η.
Exam Note: Substitute γ = 7/5, then n = 10.
Transport Phenomena (Part 2)
Question 239. An ideal gas goes through a polytropic process. Find the polytropic exponent n if in this process the coefficient (a) of diffusion; (b) of viscosity; (c) of heat conductivity remains constant.
Solution.
(a) D ∝ V√T ∝ √(pV³). Thus D remains constant in the process pV3 = constant, so the polytropic index n = 3.
(b) η ∝ √T ∝ √(pV). So η remains constant in the isothermal process pV = constant, n = 1.
(c) Heat conductivity κ = ηcv and cv is a constant for an ideal gas. Thus n = 1 here also.
Teacher's Note: Write each coefficient in terms of p and V; constancy gives pV^n.
Exam Note: Express in p, V and match to pV^n.
Question 240. Knowing the viscosity coefficient of helium under standard conditions, calculate the effective diameter of the helium atom.
Solution.
η = (1/3)√(8kT/(πm)) · m/(√2 π d²) = (2/3)√(mkT/π³) · 1/d², or d = (2/(3η))1/2 (mkT/π³)1/4.
With η = 18.9 μPa·s, m = 4×10−3/(6×1023) kg, T = 273 K, d ≈ 0.178 nm.
Teacher's Note: η is independent of pressure; solve η = (1/3)⟨v⟩λρ for d using η(He) = 18.9 μPa·s.
Exam Note: Quote η(He) used; keep SI units.
Question 241. The heat conductivity of helium is 8.7 times that of argon (under standard conditions). Find the ratio of effective diameters of argon and helium atoms.
Solution.
κ = (1/3)⟨v⟩λρcv = (1/3)√(8kT/(πm)) · (1/(√2 π d² n)) · mn · Cv/M, where Cv/M is the specific heat capacity. Now Cv is the same for all monoatomic gases such as He and Ar. Thus κ ∝ 1/(√M d²).
κHe/κAr = 8.7 = (√MAr dAr²)/(√MHe dHe²) = √10 dAr²/dHe², so dAr/dHe = √(8.7/√10) = 1.658 ≈ 1.7.
Teacher's Note: For monatomic gases κ ∝ 1/(√M d²); mass ratio √(40/4) = √10.
Exam Note: Write κ ∝ 1/(√M d²) before forming ratios.
Question 242. Under standard conditions helium fills up the space between two long coaxial cylinders. The mean radius of the cylinders is equal to R, the gap between them is equal to ΔR, with ΔR ≪ R. The outer cylinder rotates with a fairly low angular velocity ω about the stationary inner cylinder. Find the moment of friction forces acting on a unit length of the inner cylinder. Down to what magnitude should the helium pressure be lowered (keeping the temperature constant) to decrease the sought moment of friction forces η = 10 times if ΔR = 6 mm?
Solution.
In this case N1(r2² − r1²)/(r1²r2²) = 4πηω, with r2 − r1 = ΔR and r1 ≈ r2 ≈ R: N1·2RΔR/R4 = 4πηω, or N1 = 2πηωR³/ΔR.
To decrease N1 n times, the viscosity η must be decreased n times. Now η does not depend on pressure until the pressure is so low that the mean free path equals, say, ½ΔR. Then the mean free path is fixed and η decreases with pressure.
The mean free path equals ½ΔR when kT/(√2 π d² p0) = ½ΔR. The corresponding pressure is p0 = √2 kT/(π d² ΔR). The sought pressure is n times less: p = √2 kT/(π d² n ΔR) ≈ 0.71 Pa.
The answer is qualitative and depends on the choice ½ΔR for the mean free path.
Corrected: the printed text writes the mean free path condition as λ = ΔR in one line while the working uses ½ΔR; the consistent condition λ = ½ΔR is used above.
Teacher's Note: η is pressure-independent until λ ~ gap; below that η ∝ p, so torque ∝ p.
Exam Note: State the assumed λ = ½ΔR threshold.
Question 243. A gas fills up the space between two long coaxial cylinders of radii R1 and R2, with R1 < R2. The outer cylinder rotates with a fairly low angular velocity ω about the stationary inner cylinder. The moment of friction forces acting on a unit length of the inner cylinder is equal to N1. Find the viscosity coefficient η of the gas taking into account that the friction force acting on a unit area of the cylindrical surface of radius r is determined by the formula σ = ηr(∂ω/∂r).
Solution.
We neglect the moment of inertia of the gas in a shell. Then the moment of friction forces on a unit length of the cylinder must be a constant as a function of r. So 2πr³η dω/dr = N1, or ω(r) = (N1/(4πη))(1/R1² − 1/r²), using ω = 0 at r = R1.
At r = R2, ω is the angular velocity of the outer cylinder, so η = (N1/(4πω))(1/R1² − 1/R2²).
Teacher's Note: Steady state means torque per unit length is the same at every radius.
Exam Note: Integrate dω/dr ∝ 1/r³ with ω(R₁)=0.
Question 244. Two identical parallel discs have a common axis and are located at a distance h from each other. The radius of each disc is equal to a, with a ≫ h. One disc is rotated with a low angular velocity ω relative to the other, stationary, disc. Find the moment of friction forces acting on the stationary disc if the viscosity coefficient of the gas between the discs is equal to η.
Solution.
We consider two adjoining layers. The velocity gradient is ωr/h, so the friction force per unit area at radius r is ηωr/h. The moment of the frictional force is
N = ∫0a r · 2πr dr · η r ω/h = πηa⁴ω/(2h).
Teacher's Note: Shear stress η·(velocity gradient) at radius r, times lever arm r and ring area 2πr dr.
Exam Note: Integrate ring torques from 0 to a.
Question 245. Solve the foregoing problem, assuming that the discs are located in an ultra-rarefied gas of molar mass M, at temperature T and under pressure p.
Solution.
In the ultra-rarefied gas we must determine η by taking λ = ½h. Then η = (1/3)√(8kT/(πm)) · ½h · mp/(kT) = (1/3)√(2M/(πRT)) hp, so N = (1/3) ω a⁴ p √(πM/(2RT)).
Teacher's Note: When λ ≫ h, collisions occur only with the discs, so effective λ is about h/2.
Exam Note: Replace λ by h/2, then reuse the previous result.
Question 246. Making use of Poiseuille's equation (1.7d), find the mass μ of gas flowing per unit time through the pipe of length l and radius a if constant pressures p1 and p2 are maintained at its ends.
Solution.
Take an infinitesimal section of length dx and apply Poiseuille's equation to this. Then dV/dt = −(πa⁴/(8η)) ∂p/∂x.
From pV = RT·m/M, p dV = (RT/M) dm, or dm/dt = μ = −(πa⁴M/(8ηRT)) p dp/dx.
This equation implies that if the flow is isothermal then p dp/dx must be a constant and so equals |p2² − p1²|/(2l) in magnitude. Thus
μ = (πa⁴M/(16ηRT)) · |p2² − p1²|/l.
Teacher's Note: Mass flow is steady, so p·dp/dx is constant; integrate to get p² linear.
Exam Note: Apply Poiseuille locally, then integrate p dp along pipe.
Question 247. One end of a rod, enclosed in a thermally insulating sheath, is kept at a temperature T1 while the other, at T2. The rod is composed of two sections whose lengths are l1 and l2 and heat conductivity coefficients κ1 and κ2. Find the temperature of the interface.
Solution.
Let T = temperature of the interface. Then the heat flowing from the left equals the heat flowing into the right in equilibrium. Thus κ1(T1 − T)/l1 = κ2(T − T2)/l2, or
T = (κ1T1/l1 + κ2T2/l2) / (κ1/l1 + κ2/l2).
Teacher's Note: Steady state: same heat current through both sections, like series resistances.
Exam Note: Equate heat flow in the two sections.
Question 248. Two rods whose lengths are l1 and l2 and heat conductivity coefficients κ1 and κ2 are placed end to end. Find the heat conductivity coefficient of a uniform rod of length l1 + l2 whose conductivity is the same as that of the system of these two rods. The lateral surfaces of the rods are assumed to be thermally insulated.
Solution.
We have κ1(T1 − T)/l1 = κ2(T − T2)/l2 = κ(T1 − T2)/(l1 + l2). Using the previous result for T, this gives
κ = (l1 + l2) / (l1/κ1 + l2/κ2).
Teacher's Note: Thermal resistances l/κ add in series; equivalent κ = total length / total resistance.
Exam Note: Add l/κ terms; check equal-κ case.
Question 249. A rod of length l with thermally insulated lateral surface consists of material whose heat conductivity coefficient varies with temperature as κ = α/T, where α is a constant. The ends of the rod are kept at temperatures T1 and T2. Find the function T(x), where x is the distance from the end whose temperature is T1, and the heat flow density.
Solution.
By definition the heat flux (per unit area) is q = −κ dT/dx = −α d(ln T)/dx = constant = α ln(T1/T2)/l.
Integrating, ln T = (x/l) ln(T2/T1) + ln T1, where T1 = temperature at the end x = 0. So
T = T1(T2/T1)x/l and q = α ln(T1/T2)/l.
Teacher's Note: With κ = α/T, flux becomes −α d(ln T)/dx, so ln T is linear in x.
Exam Note: State q constant, integrate d(ln T).
Question 250. Two chunks of metal with heat capacities C1 and C2 are interconnected by a rod of length l and cross-sectional area S and fairly low heat conductivity κ. The whole system is thermally insulated from the environment. At a moment t = 0 the temperature difference between the two chunks of metal equals (ΔT)0. Assuming the heat capacity of the rod to be negligible, find the temperature difference between the chunks as a function of time.
Solution.
Suppose the chunks have temperatures T1, T2 at time t and T1 − dT1, T2 + dT2 at time t + dt. Then C1dT1 = C2dT2 = (κS/l)(T1 − T2)dt.
Thus dΔT = −(κS/l)(1/C1 + 1/C2) ΔT dt, where ΔT = T1 − T2. Hence
ΔT = (ΔT)0 e−t/τ, where 1/τ = (κS/l)(1/C1 + 1/C2).
Teacher's Note: Heat leaving one chunk enters the other; difference decays exponentially like Newton cooling.
Exam Note: Write dΔT = dT₁ + dT₂ magnitudes, then integrate.
Question 251. Find the temperature distribution in a substance placed between two parallel plates kept at temperatures T1 and T2. The plate separation is equal to l, the heat conductivity coefficient of the substance κ ∝ √T.
Solution.
q = −κ ∂T/∂x = −A√T ∂T/∂x = −(2/3)A ∂T3/2/∂x (A = constant) = (2/3)A (T13/2 − T23/2)/l.
Thus T3/2 = constant − (x/l)(T13/2 − T23/2). Using T = T1 at x = 0: T3/2 = T13/2 + (x/l)(T23/2 − T13/2), so
T = T1[1 + (x/l)((T2/T1)3/2 − 1)]2/3.
Teacher's Note: Constant flux with κ ∝ √T makes T^(3/2) linear in x.
Exam Note: Integrate √T dT to T^(3/2).
Question 252. The space between two large horizontal plates is filled with helium. The plate separation equals l = 50 mm. The lower plate is kept at a temperature T1 = 290 K, the upper, at T2 = 330 K. Find the heat flow density if the gas pressure is close to standard.
Solution.
κ = (1/3)√(8RT/(πM)) · (1/(√2 π d² n)) · mn · (R i/2)/M = R3/2 i T1/2/(3π3/2 d² √M NA).
Then from the previous problem (κ ∝ √T),
q = 2i R3/2(T23/2 − T13/2)/(9π3/2 d² √M NA l), with i = 3 here.
Teacher's Note: Gas κ ∝ √T and independent of pressure; reuse Q.251 flux formula with i = 3.
Exam Note: Give formula; i = 3 for monatomic helium.
Question 253. The space between two large parallel plates separated by a distance l = 5.0 mm is filled with helium under a pressure p = 1.0 Pa. One plate is kept at a temperature t1 = 17°C and the other, at a temperature t2 = 37°C. Find the mean free path of helium atoms and the heat flow density.
Solution.
At this pressure and average temperature T = (T1 + T2)/2 = 27°C = 300 K, λ = kT/(√2 π d² p) = 2330×10−5 m = 23.3 mm ≫ 5.0 mm = l.
The gas is ultra-thin and we write λ = ½l here. Then q = κ dT/dx = κ(T2 − T1)/l, where κ = (1/3)⟨v⟩ · ½l · (Mp/(RT)) · R/((γ−1)M) = p⟨v⟩l/(6T(γ−1)).
And q = p⟨v⟩(T2 − T1)/(6T(γ−1)), where ⟨v⟩ = √(8RT/(Mπ)). We have used T2 − T1 ≪ (T2 + T1)/2 here.
With γ = 5/3, ⟨v⟩ ≈ 1.26×103 m/s this gives q ≈ 21 W/m² (numerical value computed here).
Teacher's Note: λ (23 mm) exceeds the gap, so atoms cross plate to plate; take λ ≈ l/2.
Exam Note: Compare λ with l first to choose regime.
Question 254. Find the temperature distribution in the space between two coaxial cylinders of radii R1 and R2 filled with a uniform heat conducting substance if the temperatures of the cylinders are constant and are equal to T1 and T2 respectively.
Solution.
In equilibrium 2πrκ dT/dr = −A = constant. So T = B − (A/(2πκ)) ln r. But T = T1 when r = R1 and T = T2 when r = R2. From this we find
T = T1 + (T2 − T1) ln(r/R1) / ln(R2/R1).
Teacher's Note: Total heat flow per length is constant across cylindrical shells, giving T linear in ln r.
Exam Note: Use constant flux 2πrκ dT/dr, two boundary conditions.
Question 255. Solve the foregoing problem for the case of two concentric spheres of radii R1 and R2 and temperatures T1 and T2.
Solution.
In equilibrium 4πr²κ dT/dr = −A = constant, so T = B + A/(4πκ r). Using T = T1 when r = R1 and T = T2 when r = R2,
T = T1 + (T2 − T1)/(1/R2 − 1/R1) · (1/r − 1/R1).
Teacher's Note: Constant total heat flow through spherical shells makes T linear in 1/r.
Exam Note: Mirror the cylinder case with 4πr² area.
Question 256. A constant electric current flows along a uniform wire with cross-sectional radius R and heat conductivity coefficient κ. A unit volume of the wire generates a thermal power w. Find the temperature distribution across the wire provided the steady-state temperature at the wire surface is equal to T0.
Solution.
The heat flux vector is −κ grad T and its divergence equals w. Thus ∇²T = −w/κ, or (1/r) d/dr(r dT/dr) = −w/κ in cylindrical coordinates. Integrating, T = B + A ln r − w r²/(4κ).
Since T is finite at r = 0, A = 0. Also T = T0 at r = R, so B = T0 + wR²/(4κ). Thus
T = T0 + (w/(4κ))(R² − r²),
where r is the distance from the axis of the wire.
Corrected: the printed intermediate step shows the r² term as w r²/(2κ); the correct coefficient is w/(4κ), consistent with the final answer.
Teacher's Note: Heat generated per volume balances conduction; finiteness at axis kills the ln r term.
Exam Note: Reject ln r term; apply T(R) = T₀.
Question 257. The thermal power of density w is generated uniformly inside a uniform sphere of radius R and heat conductivity coefficient κ. Find the temperature distribution in the sphere provided the steady-state temperature at its surface is equal to T0.
Solution.
Here again ∇²T = −w/κ. So in spherical polar coordinates (1/r²) d/dr(r² dT/dr) = −w/κ, or r² dT/dr = −(w/(3κ)) r³ + A. Thus T = B − A/r − (w/(6κ)) r².
Again A = 0 (finite T at r = 0) and B = T0 + wR²/(6κ). So finally
T = T0 + (w/(6κ))(R² − r²).
Teacher's Note: Same method as the wire, but spherical Laplacian gives factor 1/6 instead of 1/4.
Exam Note: Use spherical ∇²; discard 1/r term.
JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 15 Transport Phenomena
Download IE Irodov Solutions for JEE
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 15 Transport Phenomena PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.