IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 1

IE Irodov Solutions for JEE Physics: Chapter 16 Constant Electric Field In Vacuum

Review structured textbook solutions for JEE Physics Chapter 16 Constant Electric Field In Vacuum prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Physics Solutions: Chapter 16 Constant Electric Field In Vacuum

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Constant Electric Field In Vacuum - Questions 1 to 23

Problems 1-23

Question 1. Calculate the ratio of the electrostatic to gravitational interaction forces between two electrons, between two protons. At what value of the specific charge q/m of a particle would these forces become equal (in their absolute values) in the case of interaction of identical particles?

Solution.

Fel = q²/(4πε0r²) and Fgr = γm²/r².

Thus for electrons Fel/Fgr = q²/(4πε0γm²) = (1.602×10−19 C)² / [(1/(9×109)) × 6.67×10−11 m³/(kg·s²) × (9.11×10−31 kg)²] = 4×1042.

Similarly for protons Fel/Fgr = (1.602×10−19)² / [(1/(9×109)) × 6.67×10−11 × (1.672×10−27)²] = 1.2×1036. Corrected: the book prints 1×1036; the numbers give 1.2×1036.

For Fel = Fgr: q²/(4πε0r²) = γm²/r², so q/m = √(4πε0γ) = √(6.67×10−11/(9×109)) = 0.86×10−10 C/kg.

Teacher's Note: Both forces fall as 1/r², so the ratio is independent of distance; gravity is negligible for charged particles.

Exam Note: Show the ratio formula, then substitute constants.

Question 2. What would be the interaction force between two copper spheres, each of mass 1 g, separated by the distance 1 m, if the total electronic charge in them differed from the total charge of the nuclei by one per cent?

Solution.

Number of atoms in a sphere of mass 1 g = (1/63.54) × 6.023×1023.

So the total nuclear charge = (6.023×1023/63.54) × 1.6×10−19 × 29 ≈ 4.4×104 C.

Charge on the sphere = total nuclear charge − total electronic charge = (6.023×1023/63.54) × 1.6×10−19 × (29×1/100) = 4.398×102 C.

Hence the force of interaction between the two spheres is F = (1/4πε0) · (4.398×102)²/1² N = 9×109 × 104 × 19.348 N = 1.74×1015 N.

Teacher's Note: Copper has Z = 29; one per cent of its total nuclear charge is still enormous.

Exam Note: Count atoms, multiply by 29e, take 1%, apply Coulomb.

Question 3. Two small equally charged spheres, each of mass m, are suspended from the same point by silk threads of length l. The distance between the spheres x << l. Find the rate dq/dt with which the charge leaks off each sphere if their approach velocity varies as v = a/√x, where a is a constant.

Solution.

Let each thread make angle θ with the vertical when the separation is x. Forces on one sphere: tension T, weight mg and electric repulsion Fe (horizontal).

FemgTθx

Newton's second law: T cos θ = mg (1) and T sin θ = Fe (2). Hence tan θ = Fe/mg (3).

Also tan θ = (x/2)/√(l² − (x/2)²) ≈ x/2l as x << l (4).

From (3) and (4): Fe = mgx/2l, i.e. q²/(4πε0x²) = mgx/2l, so q² = 2πε0mgx³/l (5).

Differentiating (5) with respect to time: 2q dq/dt = (2πε0mg/l) · 3x² (dx/dt).

Here dx/dt = v = a/√x (approach velocity), so (2πε0mgx³/l)1/2 dq/dt = (3πε0mg/l) x² · a/√x.

Hence dq/dt = (3/2) a √(2πε0mg/l) (magnitude; the charge decreases).

Teacher's Note: Eliminate tan θ using x << l to get q² ∝ x³, then differentiate with the given v.

Exam Note: Small-angle step and correct differentiation earn marks.

Question 4. Two positive charges q1 and q2 are located at the points with radius vectors r1 and r2. Find a negative charge q3 and a radius vector r3 of the point at which it has to be placed for the force acting on each of the three charges to be equal to zero.

Solution.

Take the three charges q1, q2, q3 with position vectors r1, r2, r3 (the figure shows q3 on the line joining q1 and q2, between them).

Equilibrium of q3: q2q3(r2 − r3)/|r2 − r3|³ + q1q3(r1 − r3)/|r1 − r3|³ = 0.

Since the unit vectors are opposite, (r2 − r3)/|r2 − r3| = −(r1 − r3)/|r1 − r3|, which gives q2/|r2 − r3|² = q1/|r1 − r3|².

Or √q2 (r1 − r3) = √q1 (r3 − r2), so

r3 = (√q2 r1 + √q1 r2)/(√q1 + √q2).

Equilibrium of q1: q3(r3 − r1)/|r3 − r1|³ + q2(r2 − r1)/|r2 − r1|³ = 0, so q3 = −q2|r1 − r3|²/|r2 − r1|².

Substituting r3: q3 = −q1q2/(√q1 + √q2)².

Teacher's Note: Zero force on q3 fixes its position; zero force on q1 then fixes the magnitude of q3.

Exam Note: Do both equilibrium conditions; stating q3 negative matters.

Question 5. A thin wire ring of radius r has an electric charge q. What will be the increment of the force stretching the wire if a point charge q0 is placed at the ring's centre?

Solution.

When q0 is placed at the centre, the extra tension produced in the wire balances the electric force on each element of the ring. Let the tension produced be T. Consider an element subtending dθ with charge dq = (q/2πr) r dθ, acted on by dFe radially outward and by tension T at both ends (figure: a ring with the element dq, the force dFe pointing outward from the centre q0, and T along the tangents).

Newton's second law in projection form Fn = mwn, with wn = 0 for the equilibrium of the element:

T dθ − (1/4πε0)(q0/r²)(q/2πr · r dθ) = (dm)·0,

so T = qq0/(8π²ε0r²).

Teacher's Note: Use equilibrium of a small arc; the two tensions give a net inward 2T sin(dθ/2) ≈ T dθ.

Exam Note: Small-angle approximation for the arc is the key step.

Question 6. A positive point charge 50 μC is located in the plane xy at the point with radius vector r0 = 2i + 3j, where i and j are the unit vectors of the x and y axes. Find the vector of the electric field E and its magnitude at the point with radius vector r = 8i − 5j. Here r0 and r are expressed in metres.

Solution.

The sought field strength is E = (1/4πε0) · q(r − r0)/|r − r0|³.

Putting the values, E = 4.5 kV/m. Here r − r0 = 6i − 8j with |r − r0| = 10 m, so the vector is E = (2.7i − 3.6j) kV/m (worked out here from the same formula; the book prints only the magnitude).

Teacher's Note: Field points along r − r0, away from a positive charge; use the 3-4-5 triangle.

Exam Note: Give both the vector and its magnitude.

Question 7. Point charges q and −q are located at the vertices of a square with diagonals 2l as shown in Fig. 3.1. Find the magnitude of the electric field strength at a point located symmetrically with respect to the vertices of the square at a distance x from its centre.

Solution.

Take the point of intersection of the diagonals as the origin, with k directed normally, emerging from the plane of the figure. The four charges lie at distance l from the origin on the x and y axes; the field point is at height x along k, so each charge is at distance √(l² + x²) from it.

Hence the sought field strength, adding the four contributions, each of the form ±q(li + xk)/(4πε0(l² + x²)3/2) with the appropriate directions:

E = [q/(4πε0(l² + x²)3/2)] [2li − 2lj] (the xk components cancel).

Thus E = ql/(√2 πε0(l² + x²)3/2).

Teacher's Note: Components along the axis cancel in pairs; only in-plane parts add.

Exam Note: Use symmetry to cancel components before adding.

Question 8. A thin half-ring of radius R = 20 cm is uniformly charged with a total charge q = 0.70 nC. Find the magnitude of the electric field strength at the curvature centre of this half-ring.

Solution.

By symmetry only the component along the axis of symmetry (x-axis) survives, so E = ∫dEx. An element dl = R dθ carries charge dq = (q/πR) R dθ = q dθ/π, and its field component along x is

dEx = dq cos θ/(4πε0R²) = qR cos θ dθ/(4π²ε0R³).

Hence E = [q/(4π²ε0R²)] ∫−π/2π/2 cos θ dθ = q/(2π²ε0R²).

Numerically (worked out here): E = 0.70×10−9/(2π² × 8.854×10−12 × 0.04) ≈ 100 V/m.

Teacher's Note: Perpendicular components cancel; integrate cos θ from −π/2 to π/2 to get 2.

Exam Note: Show the integral limits and put in numbers.

Question 9. A thin wire ring of radius R carries a charge q. Find the magnitude of the electric field strength on the axis of the ring as a function of distance l from its centre. Investigate the obtained function at l >> R. Find the maximum strength magnitude and the corresponding distance l. Draw the approximate plot of the function E(l).

Solution.

From symmetry the field normal to the axis is zero, i.e. En = 0 and E = El. For an element dq = (q/2πR) dx of the ring, dEl = [dq/(4πε0(R² + l²))] cos θ with cos θ = l/(R² + l²)1/2.

Hence E = ∫dEl = ∫02πR (ql/2πR) · dx/(4πε0(R² + l²)3/2), or

E = (1/4πε0) · ql/(l² + R²)3/2.

For l >> R the ring behaves like a point charge: E = (1/4πε0) q/l².

For Emax, dE/dl = 0: (l² + R²)3/2 − (3/2) l (l² + R²)1/2 · 2l = 0, or l² + R² − 3l² = 0.

Thus l = R/√2 and Emax = q/(6√3 πε0R²).

R/√2lEEmax

The plot (as shown): E = 0 at l = 0, rises almost linearly for small l, peaks at l = R/√2, then falls as 1/l².

Teacher's Note: E vanishes at the centre and at infinity, so it has a maximum in between at R/√2.

Exam Note: Differentiate, set zero, and substitute back for Emax.

Question 10. A point charge q is located at the centre of a thin ring of radius R with uniformly distributed charge −q. Find the magnitude of the electric field strength vector at the point lying on the axis of the ring at a distance x from its centre, if x >> R.

Solution.

The electric potential at distance x on the axis is φ(x) = q/(4πε0x) − q/(4πε0(R² + x²)1/2).

Hence the field strength along the x-axis (which is the net field strength in our case):

Ex = −dφ/dx = (q/4πε0)(1/x²) − qx/(4πε0(R² + x²)3/2) = (q/4πε0) · x³[(1 + R²/x²)3/2 − 1]/(x²(R² + x²)3/2) = (q/4πε0) · x³[3R²/2x² + 3R⁴/8x⁴ + …]/(x²(R² + x²)3/2).

Neglecting higher powers of R/x as x >> R: E = 3qR²/(8πε0x⁴).

Teacher's Note: The point charge and ring form a charge-neutral pair, so the field falls as 1/x⁴.

Exam Note: Expand (1 + R²/x²)3/2 binomially and keep the first term.

Question 11. A system consists of a thin charged wire ring of radius R and a very long uniformly charged thread oriented along the axis of the ring, with one of its ends coinciding with the centre of the ring. The total charge of the ring is equal to q. The charge of the thread (per unit length) is equal to λ. Find the interaction force between the ring and the thread.

Solution.

From the solution of problem 9, the field due to the ring at a point on its axis (x-axis) at distance x from its centre is E(x) = qx/(4πε0(R² + x²)3/2), directed along the x-axis by symmetry.

An element dx of the thread carries charge λ dx. The force on it in the field of the ring is dF = (λ dx)E(x) = λqx dx/(4πε0(R² + x²)3/2).

Thus the sought interaction F = ∫0∞ λqx dx/(4πε0(R² + x²)3/2); on integrating we get F = λq/(4πε0R).

Teacher's Note: Integrate the ring's axial field over the thread; the integral of x/(R²+x²)3/2 from 0 to ∞ is 1/R.

Exam Note: Reuse the ring-axis field from Q9.

Question 12. A thin non conducting ring of radius R has a linear charge density λ = λ0 cos φ, where λ0 is a constant, φ is the azimuthal angle. Find the magnitude of the electric field strength (a) at the centre of the ring; (b) on the axis of the ring as a function of the distance x from its centre. Investigate the obtained function at x >> R.

Solution.

(a) The charge distribution is positive on one half of the ring and negative on the other (figure). By symmetry the vector E at the centre O is directed along the axis φ = 0 (to the right in the figure), and its magnitude is the sum of the projections onto this direction of the fields dE of the elementary charges dq. The projection is dE cos φ = (1/4πε0)(dq/R²) cos φ, where dq = λR dφ = λ0R cos φ dφ.

Integrating over φ between 0 and 2π: E = [λ0/(4πε0R)] ∫02π cos²φ dφ = λ0/(4ε0R). (The integral is simplest using ⟨cos²φ⟩ = 1/2, so ∫cos²φ dφ = π.)

(b) Take an element S at azimuthal angle φ subtending dφ at the centre. Its field at the axial point P (distance x from O) is λ0 cos φ dφ R/(4πε0(x² + R²)) along SP, with components × {cos θ along OP, sin θ along OS}, where cos θ = x/(x² + R²)1/2.

The component along OP vanishes on integration since ∫02π cos φ dφ = 0.

The component along OS (radial direction of the element) splits into parts along OX and OY: λ0R² cos φ dφ/(4πε0(x² + R²)3/2) × {cos φ along OX, sin φ along OY}. On integration the part along OY vanishes. Finally

E = Ex = λ0R²/(4ε0(x² + R²)3/2), directed perpendicular to the ring's axis, along OX.

For x >> R, Ex = p/(4πε0x³), where p = λ0πR² (the ring behaves like a dipole).

Teacher's Note: Charge density cos φ gives a dipole-like ring; only the cos²φ term survives integration.

Exam Note: Show why OP and OY components vanish before integrating.

Question 13. A thin straight rod of length 2a carrying a uniformly distributed charge q is located in vacuum. Find the magnitude of the electric field strength as a function of the distance r from the rod's centre along the straight line (a) perpendicular to the rod and passing through its centre; (b) coinciding with the rod's direction (at the points lying outside the rod). Investigate the obtained expressions at r >> a.

Solution.

(a) By symmetry the vector E is directed along the perpendicular bisector of the rod. We find the component dEr of the field created by the element dl of the rod (charge dq) and integrate over all elements. Here dEr = dE cos α = (1/4πε0)(λ dl/r0²) cos α, where λ = q/2a is the linear charge density. Since dl cos α = r0 dα and r0 = r/cos α,

dEr = (1/4πε0)(λ r0 dα/r0²) = (λ/4πε0r) cos α dα.

Integrating: E = [λ/(4πε0r)] · 2∫0α0 cos α dα = [λ/(4πε0r)] · 2 sin α0, with sin α0 = a/√(a² + r²).

Thus E = (q/2a)/(4πε0r) · 2a/√(a² + r²) = q/(4πε0r√(a² + r²)). For r >> a, E = q/(4πε0r²), the field of a point charge.

(b) Take an element dl at distance l from the centre of the rod. The field at P (on the rod's line, at distance r from the centre) due to it is dE = λ dl/(4πε0(r − l)²) if the element lies on the near side, and dE = λ dl/(4πε0(r + l)²) if it lies on the other side.

Hence E = ∫dE = ∫0a λ dl/(4πε0(r − l)²) + ∫0a λ dl/(4πε0(r + l)²). On integrating and putting λ = q/2a, E = (q/4πε0) · 1/(r² − a²). For r >> a, E ≈ q/(4πε0r²).

Teacher's Note: Use the angle α as the integration variable in (a); pair elements on both sides of the centre in (b).

Exam Note: Show far-field limit reducing to a point charge.

Question 14. A very long straight uniformly charged thread carries a charge λ per unit length. Find the magnitude and direction of the electric field strength at a point which is at a distance y from the thread and lies on the perpendicular passing through one of the thread's ends.

Solution.

The problem reduces to finding the projections Ex (along the thread) and Ey (perpendicular to it), assuming λ > 0.

The contribution to Ex from the charge element of the segment dx is dEx = (1/4πε0)(λ dx/r²) sin α (1). In our case dx = r dα/cos α and r = y/cos α, so dEx = [λ/(4πε0y)] sin α dα. Integrating over α between 0 and π/2: Ex = λ/(4πε0y).

Ey differs from dEx only in that sin α in (1) is replaced by cos α: dEy = λ cos α dα/(4πε0y), and Ey = λ/(4πε0y).

An interesting result: Ex = Ey independently of y, i.e. E is oriented at an angle of 45° to the thread. Its modulus is E = √(Ex² + Ey²) = √2 λ/(4πε0y).

Teacher's Note: Equal x and y components for a semi-infinite thread give a fixed 45° direction.

Exam Note: State magnitude and the 45° direction both.

Question 15. A thread carrying a uniform charge λ per unit length has the configurations shown in Fig. 3.2 a and b (a: a straight vertical part bending through a quarter circle of radius R into a straight horizontal part; b: two straight parallel parts joined by a semicircle of radius R). Assuming a curvature radius R to be considerably less than the length of the thread, find the magnitude of the electric field strength at the point O (the centre of the arc).

Solution.

(a) Using the solution of Q.14, the net field at O due to the two straight parts of the thread is zero (equal magnitudes at 45°, cancelling). For the curved part (arc) derive a general expression: the field at the centre of an arc of radius R and linear charge density λ which subtends angle θ0 at the centre. By symmetry the field is along the bisector of the angle θ0:

E = ∫−θ0/2+θ0/2 [λ(R dθ)/(4πε0R²)] cos θ = [λ/(2πε0R)] sin(θ0/2).

In our problem θ0 = π/2, so the field due to the curved part at O is E0 = √2 λ/(4πε0R), which is also the sought result.

(b) Using the solution of Q.14, the net field at O due to the straight parts equals √2(√2 λ/(4πε0R)) = λ/(2πε0R), directed vertically down. By the result of (a) with θ0 = π, the field due to the semicircle at O is λ/(2πε0R), directed vertically upward. Hence the sought net field strength is zero.

Teacher's Note: Straight parts are semi-infinite threads (Q14); the arc gives (λ/2πε0R) sin(θ0/2).

Exam Note: Reuse Q14 and the arc formula; opposite fields cancel in (b).

Question 16. A sphere of radius R carries a surface charge of density σ = a·r, where a is a constant vector, and r is the radius vector of a point of the sphere relative to its centre. Find the electric field strength vector at the centre of the sphere.

Solution.

The charge distribution σ = a·r = aR cos θ (θ measured from a) is positive on the side of a and negative on the opposite side. By symmetry the sought field E at the centre O is opposite to a. Take a ring at polar angle θ (R is the sphere radius, written r in the book):

dq = σ(2πr sin θ) r dθ = (a·r) 2πr² sin θ dθ = 2πa r³ sin θ cos θ dθ.

Using the result of Q.9 (field on the axis of a ring), the field due to the ring at O is opposite to a:

dE = [dq r cos θ/(4πε0(r² sin²θ + r² cos²θ)3/2)] (−a/a) = −(a r/2ε0) sin θ cos²θ dθ.

Thus E = ∫dE = −(a r/2ε0) ∫0π sin θ cos²θ dθ = −(a r/2ε0)(2/3), so E = −ar/(3ε0), with r the radius of the sphere (field directed opposite to a).

Teacher's Note: Treat the sphere as rings; the ring-axis field from Q9 plus ∫sin θ cos²θ dθ = 2/3.

Exam Note: Check units: a is charge per volume, so aR/ε0 is a field.

Question 17. Suppose the surface charge density over a sphere of radius R depends on a polar angle θ as σ = σ0 cos θ, where σ0 is a positive constant. Show that such a charge distribution can be represented as a result of a small relative shift of two uniformly charged balls of radius R whose charges are equal in magnitude and opposite in sign. Resorting to this representation, find the electric field strength vector inside the given sphere.

Solution.

Start from two charged spherical balls of radius R with equal and opposite volume charge densities +ρ and −ρ. Their centres are at +a/2 and −a/2 respectively, so the equations of their surfaces are |r − a/2| = R and |r + a/2| = R, i.e. r − (a/2)cos θ = R and r + (a/2)cos θ = R, considering a to be small. The distance between the two surfaces in the radial direction at angle θ is a cos θ and does not depend on the azimuthal angle. Hence the surface has in effect a surface density σ = σ0 cos θ with σ0 = ρa.

Inside a uniformly charged ball the field is radial and by Gauss's theorem 4πr²E = (4π/3)r³ρ/ε0, or E = ρr/(3ε0), i.e. in vector form E = ρr/(3ε0) with r measured from the ball's centre.

For the present case (positive ball centred at +a/2, negative at −a/2):

E = (ρ/3ε0)(r − a/2) − (ρ/3ε0)(r + a/2) = −ρa/(3ε0) = −(σ0/3ε0) k,

where k is the unit vector along the polar axis from which θ is measured. The field inside is uniform.

Teacher's Note: A shifted pair of opposite uniform balls makes σ = ρa cos θ; superpose their interior fields.

Exam Note: Show uniform interior field −σ0/3ε0 along −k.

Question 18. Find the electric field strength vector at the centre of a ball of radius R with volume charge density ρ = a·r, where a is a constant vector, and r is a radius vector drawn from the ball's centre.

Solution.

Consider an elemental spherical shell of thickness dr. Its surface charge density is σ = ρ dr = (a·r) dr.

Using the solution of Q.16, the field strength due to this shell is dE = −(ar/3ε0) dr.

Hence the sought field strength E = −(a/3ε0) ∫0R r dr = −aR²/(6ε0).

Teacher's Note: Split the ball into thin shells and reuse Q16 for each shell.

Exam Note: Integrate shell contributions from 0 to R.

Question 19. A very long uniformly charged thread oriented along the axis of a circle of radius R rests on its centre with one of the ends. The charge of the thread per unit length is equal to λ. Find the flux of the vector E across the circle area.

Solution.

From the solution of Q.14, the field at a perpendicular distance r < R from the end of the thread (left end) is

E(r) = [λ/(4πε0r)](−i) + [λ/(4πε0r)](er),

where er is the unit vector along the radial direction in the plane of the circle and i is along the thread (normal to the circle).

Take an elemental area dS = dr (r dθ) i on the circle. The flux over it: dΦ = E·dS = −[λ/(4πε0)] dr dθ (as er ⊥ i).

The sought flux Φ = −[λ/(4πε0)] ∫0R dr ∫02π dθ = −λR/(2ε0). If dS had been taken along (−i), Φ would be +λR/(2ε0). Hence |Φ| = λR/(2ε0).

Teacher's Note: Only the axial component of E (λ/4πε0r) contributes; the radial one is parallel to the circle.

Exam Note: State the magnitude; sign depends on the chosen normal.

Question 20. Two point charges q and −q are separated by the distance 2l (Fig. 3.3). Find the flux of the electric field strength vector across a circle of radius R (the circle lies in the plane midway between the charges, perpendicular to the line joining them).

Solution.

Consider an elemental area dS on the circle at distance r from its centre. By symmetry the net field there is normal to the plane (both charges contribute equally along the axis), so the flux through the element is

dΦ = E·dS = E dS = 2E0 cos φ dS = [2q/(4πε0(l² + r²))] · [l/(l² + r²)1/2] (r dθ) dr = 2ql r dr dθ/(4πε0(r² + l²)3/2),

where E0 = q/(4πε0(l² + r²)) is the magnitude of the field due to either point charge at the element, and cos φ = l/(l² + r²)1/2.

Thus Φ = (2ql/4πε0) ∫0R r dr/(r² + l²)3/2 ∫02π dθ = (2ql × 2π/4πε0) [1/l − 1/√(l² + R²)], i.e.

Φ = (q/ε0)[1 − l/√(l² + R²)]. (It can also be solved with a ring element or the solid-angle method.)

Teacher's Note: The two charges' fields add along the normal; ∫r dr/(r²+l²)3/2 = 1/l − 1/√(l²+R²).

Exam Note: Use symmetry: both charges give the same normal component.

Question 21. A ball of radius R is uniformly charged with the volume density ρ. Find the flux of the electric field strength vector across the ball's section formed by the plane located at a distance r0 < R from the centre of the ball.

Solution.

Consider a ring element of radius x and thickness dx on the section (figure: a disc of the ball cut by a plane at distance r0 from the centre; the field E at the ring is radial, with angle θ between E and the plane's normal dS). The flux over the element is dΦ = E·dS = Er dS cos θ.

From Gauss's theorem Er = ρr/(3ε0), with dS = 2πx dx and cos θ = r0/r. Thus dΦ = (ρr/3ε0) 2πx dx (r0/r) = (ρr0/3ε0) 2πx dx.

Hence the sought flux Φ = (2πρr0/3ε0) ∫0√(R²−r0²) x dx = (2πρr0/3ε0)(R² − r0²)/2 = πρr0(R² − r0²)/(3ε0).

Teacher's Note: Inside the ball E = ρr/3ε0, so the r cancels with cos θ = r0/r.

Exam Note: Limits of x run to √(R² − r0²).

Question 22. Each of the two long parallel threads carries a uniform charge λ per unit length. The threads are separated by a distance l. Find the maximum magnitude of the electric field strength in the symmetry plane of this system located between the threads.

Solution.

Let the threads be at A and B, and P a point of the symmetry plane at distance x from the midpoint O of AB. The field at P due to each thread is λ/(2πε0√(x² + l²/4)), directed along AP and BP respectively (away from the thread). The resultant is along OP (perpendicular to AB) with

E = 2λ cos θ/(2πε0√(x² + l²/4)) = λx/(πε0(x² + l²/4)), where cos θ = x/√(x² + l²/4).

= λ/(πε0[x + l²/4x]) = λ/(πε0[(√x − l/(2√x))² + l]).

This is maximum when √x = l/(2√x), i.e. x = l/2, and then Emax = λ/(πε0l).

Teacher's Note: Write E(x) = λ/(πε0[x + l²/4x]); the bracket is least at x = l/2.

Exam Note: Perfect-square or calculus method both earn marks.

Question 23. An infinitely long cylindrical surface of circular cross-section is uniformly charged lengthwise with the surface density σ = σ0 cos φ, where φ is the polar angle of the cylindrical coordinate system whose z axis coincides with the axis of the given surface. Find the magnitude and direction of the electric field strength vector on the z axis.

Solution.

Take a section of the cylinder perpendicular to its axis through the point where the field is to be calculated (all points on the axis are equivalent). Consider an element S with azimuthal angle φ; its length is R dφ, R being the radius of the cross-section. The element itself is a section of an infinite strip, so the field at O due to it is

σ0 cos φ (R dφ)/(2πε0R) along SO.

This resolves into [σ0 cos φ dφ/(2πε0)] {cos φ along OX towards O; sin φ along YO}. On integration the component along YO vanishes. What remains is

∫02π σ0 cos²φ dφ/(2πε0) = σ0/(2ε0) along XO, i.e. directed opposite to the x axis (the axis from which φ is measured), towards the negatively charged side.

Teacher's Note: An infinite strip behaves like a line charge; only the cos²φ component survives integration.

Exam Note: Give magnitude σ0/2ε0 and the direction.

JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 1

Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 1

Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 1. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your JEE Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.