IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 2

Download JEE Physics IE Irodov Textbook Solutions: Chapter 16 Constant Electric Field In Vacuum

Review structured textbook solutions for JEE Physics Chapter 16 Constant Electric Field In Vacuum prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Access IE Irodov Textbook Answers and Solutions

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

16. Constant Electric Field in Vacuum - Problems 24-53

Part 2 (Q. 24-53)

Question 24. The electric field strength depends only on the x and y coordinates according to the law E = a(xi + yj)/(x² + y²), where a is a constant, i and j are the unit vectors of the x and y axes. Find the flux of the vector E through a sphere of radius R with its centre at the origin of coordinates.

Solution. Since the field is axisymmetric (like the field of a uniformly charged filament), the flux through the sphere of radius R equals the flux through the lateral surface of a coaxial cylinder of the same radius R and height 2R that encloses the sphere (the field has no z-component, so the end faces carry no flux).

Φ = ∮E·dS = ErS, where on the surface r = R we have Er = a/R.

Thus Φ = (a/R)(2πR · 2R) = 4πaR.

Teacher's Note: Field has no z-component, so only the cylinder wall (area 2πR·2R) contributes to the flux.

Exam Note: Replace sphere by cylinder; state E=a/R at the wall.

Question 25. A ball of radius R carries a positive charge whose volume density depends only on a separation r from the ball's centre as ρ = ρ0(1 − r/R), where ρ0 is a constant. Assuming the permittivities of the ball and the environment to be equal to unity, find: (a) the magnitude of the electric field strength as a function of the distance r both inside and outside the ball; (b) the maximum intensity Emax and the corresponding distance rm.

Solution. (a) For r < R, the charge enclosed by a sphere of radius r is q = ∫0r 4πr²ρ0(1 − r/R) dr. Gauss' theorem gives

Er·4πr² = q/ε0 = (ρ0/ε0)∫0r 4πr²(1 − r/R) dr,

so Er = (ρ0/3ε0)(r − 3r²/4R) for r ≤ R.

Corrected: the printed solution shows r² in place of r inside the bracket; the integration gives r − 3r²/(4R), which also agrees with the standard answer.

For r > R, the whole charge lies inside: Er·4πr² = (1/ε0)∫0R 4πr²ρ0(1 − r/R) dr, so

Er = (ρ0/ε0r²)(R³/3 − R³/4) = ρ0R³/(12ε0r²) for r ≥ R.

(b) Outside the ball, E decreases with r, so the maximum is inside. Setting d/dr (r − 3r²/4R) = 0 gives 1 − 3r/(2R) = 0, so rm = 2R/3, and

Emax = ρ0R/(9ε0).

Teacher's Note: Apply Gauss separately inside and outside; maximum comes from dE/dr = 0 inside the ball.

Exam Note: Give both regions, then r_m and E_max.

Question 26. A system consists of a ball of radius R carrying a spherically symmetric charge and the surrounding space filled with a charge of volume density ρ = α/r, where α is a constant, r is the distance from the centre of the ball. Find the ball's charge at which the magnitude of the electric field strength vector is independent of r outside the ball. How high is this strength? The permittivities of the ball and the surrounding space are assumed to be equal to unity.

Solution. Let the charge of the ball be q. Applying Gauss' theorem to a spherical surface of radius r > R:

E·4πr² = qenclosed/ε0 = q/ε0 + (1/ε0)∫Rr (α/r)·4πr² dr = (q − 2παR²)/ε0 + 4παr²/(2ε0).

E is independent of r when the first term vanishes, that is when the bracket (q − 2παR²) is zero. Hence

q = 2παR² and E = α/(2ε0).

Teacher's Note: Surrounding charge adds 2πα(r² − R²); the r-independent condition cancels the constant term.

Exam Note: Show enclosed charge integral; set constant term to zero.

Question 27. A space is filled up with a charge with volume density ρ = ρ0e−αr³, where ρ0 and α are positive constants, r is the distance from the centre of this system. Find the magnitude of the electric field strength vector as a function of r. Investigate the obtained expression for the small and large values of r, i.e. at αr³ ≪ 1 and αr³ ≫ 1.

Solution. Consider a spherical surface of radius r centred at the centre of the system. By Gauss' theorem,

Er·4πr² = (1/ε0)∫0r ρ0e−αr³·4πr² dr = (4πρ0/3αε0)[1 − e−αr³].

Hence Er = (ρ0/3αε0r²)[1 − e−αr³].

For αr³ ≪ 1: 1 − e−αr³ ≈ αr³, so Er ≈ ρ0r/(3ε0) (as for uniform density ρ0).

For αr³ ≫ 1: Er ≈ ρ0/(3αε0r²) (as for a point charge 4πρ0/3α).

Note: the printed solution writes ε in place of ε0 in one line; ε0 is correct.

Teacher's Note: Integrate ρ·4πr²dr using u = r³; expand 1 − e^(−x) ≈ x for small x.

Exam Note: Show the exact result and both limits.

Question 28. Inside a ball charged uniformly with volume density ρ there is a spherical cavity. The centre of the cavity is displaced with respect to the centre of the ball by a distance a. Find the field strength E inside the cavity, assuming the permittivity equal to unity.

Solution. By Gauss' theorem, the field inside a uniformly charged ball is E = (ρ/3ε0)r, where r is measured from the centre of the ball.

The cavity can be treated as the superposition of two balls, one with charge density +ρ (filling the whole ball) and another with density −ρ (filling the cavity).

(Figure in words: a large ball with a smaller spherical cavity inside it; a points from the centre of the ball to the centre of the cavity; P is a point inside the cavity with position vector r+ from the centre of the ball and r− from the centre of the cavity.)

For a point P in the cavity, E = E+ + E− = (ρ/3ε0)(r+ − r−) = (ρ/3ε0)a, since r+ − r− = a.

Note: this result is valid whatever the ratio of the radii, and the field in the cavity is uniform.

Teacher's Note: Superpose a full +ρ ball and a −ρ ball in the cavity; the difference of r vectors is a.

Exam Note: State uniform field ρa/3ε0, directed along a.

Question 29. Inside an infinitely long circular cylinder charged uniformly with volume density ρ there is a circular cylindrical cavity. The distance between the axes of the cylinder and the cavity is equal to a. Find the electric field strength E inside the cavity. The permittivity is assumed to be equal to unity.

Solution. Take a coaxial cylindrical Gaussian surface of radius r and height h inside the long charged cylinder. Gauss' theorem gives Er·2πrh = q/ε0 = ρπr²h/ε0, so Er = ρr/(2ε0), i.e. E = (ρ/2ε0)r, with r measured from the axis.

Using the method of Q. 28 (superposition of a full cylinder of density +ρ and a cylinder of density −ρ filling the cavity), the field at a point P inside the cavity is

E = E+ + E− = (ρ/2ε0)(r+ − r−) = (ρ/2ε0)a.

Teacher's Note: Same superposition trick as the sphere, but a long cylinder gives ρr/2ε0, so factor 2 replaces 3.

Exam Note: Show Gauss step and final uniform field.

Question 30. There are two thin wire rings, each of radius R, whose axes coincide. The charges of the rings are q and −q. Find the potential difference between the centres of the rings separated by a distance a.

Solution. (Figure in words: two coaxial rings of radius R a distance a apart; the ring with +q has its centre at point 1, the ring with −q has its centre at point 2.)

Potential at centre 1 = potential due to ring 1 + potential due to ring 2:

φ1 = q/(4πε0R) − q/(4πε0√(R² + a²)).

Similarly, φ2 = −q/(4πε0R) + q/(4πε0√(R² + a²)) = −φ1.

Hence Δφ = φ1 − φ2 = 2φ1 = (q/2πε0R)[1 − 1/√(1 + (a/R)²)].

Teacher's Note: Add potentials of both rings at each centre; antisymmetry gives φ2 = −φ1, so Δφ = 2φ1.

Exam Note: Write φ1 and φ2 separately, then subtract.

Question 31. There is an infinitely long straight thread carrying a charge with linear density λ = 0.40 μC/m. Calculate the potential difference between points 1 and 2 if point 2 is removed η = 2.0 times farther from the thread than point 1.

Solution. By Gauss' theorem, the field of an infinitely long straight thread at perpendicular distance r is Er = λ/(2πε0r). Then

φ1 − φ2 = ∫12 Er dr = ∫xηx (λ/2πε0r) dr,

where x is the perpendicular distance of point 1 from the thread. Hence

Δφ12 = (λ/2πε0) ln η.

Numerically (added by us, not printed in the source): Δφ = (0.40×10−6 C/m)(2 × 9×109 N·m²/C²)(ln 2.0) = 7.2×103 × 0.693 ≈ 5.0×103 V = 5 kV.

Teacher's Note: Potential difference depends only on the ratio of distances, not on the absolute positions.

Exam Note: Quote ln η formula and the numerical value 5 kV.

Question 32. Find the electric field potential and strength at the centre of a hemisphere of radius R charged uniformly with the surface density σ.

Solution. (Figure in words: a hemispherical shell with its centre O at the origin and its axis along y; a thin ring element is taken at polar angle θ measured from the y-axis, with angular width dθ.)

Charge of the ring element: dq = (2πR sin θ)·R dθ·σ.

Potential at O due to it: dφ = dq/(4πε0R) = (σR/2ε0) sin θ dθ.

Whole hemisphere: φ = (σR/2ε0)∫0π/2 sin θ dθ = σR/(2ε0).

By symmetry the net field is along the axis (directed away from the hemisphere for σ > 0). The axial component of the field of the element is

dEy = (1/4πε0)(dq cos θ/R²) = (σ/2ε0) sin θ cos θ dθ.

Thus E = (σ/2ε0)∫0π/2 sin θ cos θ dθ = (σ/4ε0)∫0π/2 sin 2θ dθ = σ/(4ε0), directed along the axis (along YO in the figure).

Teacher's Note: Slice into rings: every ring is at distance R, so potential just adds; field needs cos θ.

Exam Note: Give both φ = σR/2ε0 and E = σ/4ε0.

Question 33. A very thin round plate of radius R carrying a uniform surface charge density σ is located in vacuum. Find the electric field potential and strength along the plate's axis as a function of a distance l from its centre. Investigate the obtained expression at l → 0 and l ≫ R.

Solution. (Figure in words: a disc of radius R; an elementary ring of radius y and thickness dy; point P on the axis at distance l from the centre.)

Potential at P due to the ring: dφ = σ·2πy dy/(4πε0(y² + l²)1/2). For the whole disc:

φ = ∫0R σ·2πy dy/(4πε0√(y² + l²)) = (σ/2ε0)(√(R² + l²) − l) = (σl/2ε0)(√(1 + (R/l)²) − 1).

By symmetry E = El = −dφ/dl = −(σ/2ε0)(l/√(R² + l²) − 1), that is

E = (σ/2ε0)[1 − 1/√(1 + (R/l)²)].

When l → 0: φ = σR/(2ε0) and E = σ/(2ε0) (field of an infinite plane).

When l ≫ R: φ ≈ σR²/(4ε0l) and E ≈ σR²/(4ε0l²) (field of a point charge σπR²).

Teacher's Note: Integrate ring potentials, then differentiate for E; limits recover plane and point-charge results.

Exam Note: Show φ, E and both limiting cases.

Question 34. Find the potential φ at the edge of a thin disc of radius R carrying the uniformly distributed charge with surface density σ.

Solution. (Figure in words: a disc of radius R with the point O on its edge; the area element is the part of a ring of radius r about O and width dr that lies inside the disc, seen from O at half-angle θ on each side of the diameter through O.)

By definition φ = (1/4πε0)∫σ dS/r. Choose dS = 2θ·r dr (the arc of the ring inside the disc subtends angle 2θ at O), with r = 2R cos θ and dr = −2R sin θ dθ. When r goes from 0 to 2R, θ goes from π/2 to 0. Substituting:

φ = −(σR/πε0)∫π/20 θ sin θ dθ.

Integrating by parts (u = θ, dv = sin θ dθ): ∫θ sin θ dθ = −θ cos θ + sin θ, which equals 1 between 0 and π/2 (so the integral from π/2 to 0 is −1). Hence

φ = σR/(πε0).

Teacher's Note: Use rings centred on the edge point, with arc angle 2θ and r = 2R cos θ; integrate by parts.

Exam Note: State area element dS = 2θ r dr and final φ.

Question 35. Find the electric field strength vector if the potential of this field has the form φ = a·r, where a is a constant vector, and r is the radius vector of a point of the field.

Solution. Here φ = a·r = axx + ayy + azz. From E = −∇φ,

E = −[∂(axx)/∂x i + ∂(ayy)/∂y j + ∂(azz)/∂z k] = −(axi + ayj + azk) = −a.

Teacher's Note: E = −∇φ; the gradient of a·r is just the constant vector a, so the field is uniform.

Exam Note: Write φ in components, differentiate, state E = −a.

Question 36. Determine the electric field strength vector if the potential of this field depends on x, y coordinates as (a) φ = a(x² − y²); (b) φ = axy, where a is a constant. Draw the approximate shape of these fields' lines of force (in the x, y plane).

Solution. (a) φ = a(x² − y²), so E = −∇φ = −2a(xi − yj). The field lines (for a > 0) satisfy dy/dx = Ey/Ex = −y/x, i.e. xy = const (rectangular hyperbolas): lines come in along the x-axis towards O and leave along the y-axis.

Figure (a), a > 0:

xy

(b) φ = axy, so E = −∇φ = −a(yi + xj). The field lines satisfy dy/dx = x/y, i.e. x² − y² = const (hyperbolas with asymptotes y = ±x, the lines of case (a) turned through 45°).

Figure (b), a > 0:

xy

Teacher's Note: E = −∇φ; field lines solve dy/dx = Ey/Ex, giving xy = const and x² − y² = const.

Exam Note: Give E vector and equation of lines of force.

Question 37. The potential of a certain electrostatic field has the form φ = a(x² + y²) + bz², where a and b are constants. Find the magnitude and direction of the electric field strength vector. What shape have the equipotential surfaces in the following cases: (a) a > 0, b > 0; (b) a > 0, b < 0?

Solution. E = −∇φ = −(2axi + 2ayj + 2bzk), so |E| = 2√(a²(x² + y²) + b²z²), directed opposite to the vector (ax, ay, bz) (at every point towards decreasing φ).

Put ρ² = x² + y². An equipotential surface is aρ² + bz² = φ = constant.

(a) a > 0, b > 0: then φ > 0 and ρ²/(φ/a) + z²/(φ/b) = 1, an ellipse in the (ρ, z) coordinates. In three dimensions the surface is an ellipsoid of revolution with semi-axes √(φ/a), √(φ/a), √(φ/b).

(b) a > 0, b < 0: φ can have either sign.

  • If φ > 0: ρ²/(φ/a) − z²/(φ/|b|) = 1, a one-sheet hyperboloid of revolution about the z-axis.
  • If φ = 0: aρ² − |b|z² = 0, i.e. z = ±√(a/|b|)·ρ, a right circular cone.
  • If φ < 0: |b|z² − aρ² = |φ|, i.e. z²/(|φ|/|b|) − ρ²/(|φ|/a) = 1, a two-sheet hyperboloid of revolution about the z-axis.

Teacher's Note: Write φ as aρ² + bz²; signs of a, b and φ decide ellipsoid, hyperboloid or cone.

Exam Note: Give |E| and each surface by sign of φ.

Question 38. A charge q is uniformly distributed over the volume of a sphere of radius R. Assuming the permittivity to be equal to unity throughout, find the potential (a) at the centre of the sphere; (b) inside the sphere as a function of the distance r from its centre.

Solution. From Gauss' theorem, the field at distance r inside the sphere is Er = ρr/(3ε0), and outside it is Er = q/(4πε0r²), where ρ = 3q/(4πR³).

(a) φ0 = ∫0∞ E·dr = ∫0R (ρr/3ε0) dr + ∫R∞ (q/4πε0r²) dr = ρR²/(6ε0) + q/(4πε0R) = q/(8πε0R) + q/(4πε0R) = 3q/(8πε0R).

(b) φ(r) = ∫rR (ρr/3ε0) dr + ∫R∞ (q/4πε0r²) dr, which on integration gives

φ(r) = (3q/8πε0R)[1 − r²/(3R²)] = φ0[1 − r²/(3R²)].

Note: the printed (b) writes the second integral with lower limit r; the correct lower limit is R (as used above), and the printed final result agrees with this.

Teacher's Note: Take potential zero at infinity: add the inside integral to the outside integral from R to ∞.

Exam Note: Use ρ = 3q/4πR³; quote both results.

Question 39. Demonstrate that the potential of the field generated by a dipole with the electric moment p (Fig. 3.4) may be represented as φ = p·r/(4πε0r³), where r is the radius vector. Using this expression, find the magnitude of the electric field strength vector as a function of r and θ.

Solution. (Fig. 3.4 in words: a dipole of moment p at the origin pointing along the z-axis; S is a field point at radius vector r making angle θ with the z-axis.)

Let charges +q and −q be separated by l. At a point at distance r ≫ l, with r+ and r− the distances to the charges:

φ(r) = q/(4πε0r+) − q/(4πε0r−) = (q/4πε0)(r− − r+)/(r+r−).

But r− − r+ ≈ l cos θ and r+r− ≈ r². Hence

φ = ql cos θ/(4πε0r²) = p cos θ/(4πε0r²) = p·r/(4πε0r³), where p = ql.

Field components: Er = −∂φ/∂r = 2p cos θ/(4πε0r³) and Eθ = −(1/r)∂φ/∂θ = p sin θ/(4πε0r³).

So E = √(Er² + Eθ²) = (p/4πε0r³)√(4cos²θ + sin²θ) = (p/4πε0r³)√(1 + 3cos²θ).

Teacher's Note: Use r− − r+ ≈ l cos θ for far points; E from −∂φ/∂r and −(1/r)∂φ/∂θ.

Exam Note: Show potential derivation and combine E_r and E_θ.

Question 40. A point dipole with an electric moment p oriented in the positive direction of the z axis is located at the origin of coordinates. Find the projections Ez and E⊥ of the electric field strength vector (on the plane perpendicular to the z axis at the point S (see Fig. 3.4)). At which points is E perpendicular to p?

Solution. From Q. 39: Er = 2p cos θ/(4πε0r³) and Eθ = p sin θ/(4πε0r³).

Resolving along the z-axis and perpendicular to it (Eθ points towards increasing θ):

Ez = Er cos θ − Eθ sin θ = (p/4πε0r³)(3cos²θ − 1),

E⊥ = Er sin θ + Eθ cos θ = 3p sin θ cos θ/(4πε0r³).

E ⊥ p when Ez = 0, i.e. 3cos²θ = 1, cos θ = 1/√3. So E ⊥ p at the points on the lateral surface of a cone whose axis is the z-axis and whose semi-vertex angle is θ = cos−1(1/√3) ≈ 54.7°.

Teacher's Note: Project E_r and E_θ on z and on the perpendicular; E_z = 0 gives cos θ = 1/√3.

Exam Note: Give both projections and the cone angle.

Question 41. A point electric dipole with a moment p is placed in the external uniform electric field whose strength equals E0, with p ↑↑ E0. In this case one of the equipotential surfaces enclosing the dipole forms a sphere. Find the radius of this sphere.

Solution. Let the dipole be at the centre of the spherical equipotential surface. On an equipotential surface the net field along the tangent is zero. At a point of the sphere at polar angle θ (measured from p), the tangential component of the uniform field is −E0 sin θ and that of the dipole field is Eθ = p sin θ/(4πε0r³), so

−E0 sin θ + p sin θ/(4πε0r³) = 0, hence r = (p/4πε0E0)1/3.

Alternative: potential near the dipole φ = p·r/(4πε0r³) − E0·r + const = (p/(4πε0r²) − E0r) cos θ + const. φ is constant over the sphere for all θ if p/(4πε0r²) − E0r = 0, which gives the same r.

Note: the first equation printed in the source (before the equals sign) is garbled in the scan; the form above is the one consistent with the rest of the solution and with the final answer.

Teacher's Note: On a spherical equipotential, tangential field vanishes: uniform-field part cancels the dipole part.

Exam Note: State r = (p/4πε0E0)^(1/3) with the condition used.

Question 42. Two thin parallel threads carry a uniform charge with linear densities λ and −λ. The distance between the threads is equal to l. Find the potential of the electric field and the magnitude of its strength vector at the distance r ≫ l at the angle θ to the vector l (Fig. 3.5).

Solution. (Fig. 3.5 in words: the two threads are perpendicular to the plane of the page; l joins the −λ thread to the +λ thread, and P is a point at distance r from the midpoint O of the threads, with r making angle θ with l.)

The distances from P to the +λ and −λ threads are |r − l/2| and |r + l/2|, with |r ∓ l/2|² = r² + l²/4 ∓ rl cos θ. The potential of a long thread is −(λ/2πε0) ln(distance) + const, so

φ = (λ/2πε0)[ln|r + l/2| − ln|r − l/2|] = (λ/4πε0) ln[(r² + rl cos θ + l²/4)/(r² − rl cos θ + l²/4)] ≈ λl cos θ/(2πε0r) for r ≫ l.

The field is the sum of the two thread fields, E = (λ/2πε0)[(r − l/2)/|r − l/2|² − (r + l/2)/|r + l/2|²], which for r ≫ l reduces to (λ/2πε0)[2(l·r)r/r4 − l/r²]. Its magnitude is that of a vector l reflected in the direction of r, so

E = λl/(2πε0r²), independent of θ. (Check with components: Er = λl cos θ/(2πε0r²), Eθ = λl sin θ/(2πε0r²).)

Note: the vector expressions printed in the source are garbled in the scan and use the opposite orientation of l in the intermediate steps; the final results above agree with the printed ones.

Teacher's Note: Two opposite line charges form a 2D dipole: φ ∝ cos θ/r and E ∝ 1/r², not 1/r³.

Exam Note: Give φ and E; note E independent of θ.

Question 43. Two coaxial rings, each of radius R, made of thin wire are separated by a small distance l (l ≪ R) and carry the charges q and −q. Find the electric field potential and strength at the axis of the system as a function of the x coordinate (Fig. 3.6). Show in the same drawing the approximate plots of the functions obtained. Investigate these functions at |x| ≫ R.

Solution. (Fig. 3.6 in words: two coaxial rings; the x-axis is the common axis with origin O midway between the rings; ring +q is at x = l/2 and ring −q at x = −l/2.)

By superposition:

φ = q/(4πε0[R² + (x − l/2)²]1/2) − q/(4πε0[R² + (x + l/2)²]1/2).

Since l ≪ R, expand to first order in l: [R² + x² ∓ lx]−1/2 ≈ (R² + x²)−1/2(1 ± lx/(2(R² + x²))). Hence

φ = qlx/(4πε0(R² + x²)3/2).

E = −∂φ/∂x = −(ql/4πε0)[1/(R² + x²)3/2 − 3x²/(R² + x²)5/2], that is

E = ql(2x² − R²)/(4πε0(R² + x²)5/2).

For |x| ≫ R: φ ≈ ql x/(4πε0|x|³) (that is, ql/(4πε0x²) for x > 0, and the opposite sign for x < 0), and E ≈ ql/(2πε0|x|³) (dipole field with p = ql).

Corrected: the printed expression for φ at |x| ≫ R omits ε0 and the sign change for x < 0; both are restored here.

Plots (x in units of R; φ in units of ql/(4πε0R²); E in units of ql/(4πε0R³)): φ is an odd function of x with extrema at x = ±R/√2; E is an even function, equal to −ql/(4πε0R³) at x = 0 and changing sign at |x| = R/√2.

x/Rφ (relative)E (relative)-4-3-2-11234

Teacher's Note: First-order expansion in l/R turns the two-ring potential into a dipole-type term x/(R²+x²)^(3/2).

Exam Note: Give φ, E, and the far-field limits.

Question 44. Two infinite planes separated by a distance l carry a uniform surface charge of densities σ and −σ (Fig. 3.7). The planes have round coaxial holes of radius R, with l ≪ R. Taking the origin O and the x coordinate axis as shown in the figure, find the potential of the electric field and the projection of its strength vector Ex on the axes of the system as functions of the x coordinate. Draw the approximate plot φ(x).

Solution. (Fig. 3.7 in words: two parallel planes with +σ and −σ a distance l apart, both with a round hole of radius R; the x-axis runs along the common axis of the holes with origin O midway between the planes.)

The field of the pair of planes with holes is, by superposition, that of two complete uniform oppositely charged planes plus two discs (filling the holes) with the opposite charges. The complete planes produce no field outside the gap (and the gap is only l wide), so on the axis only the pair of discs matters: a dipole layer of dipole moment per unit area −σl along the x-axis. Using the result of the previous problem,

φ = ∫0R (−σ)l·2πr dr·x/(4πε0(r² + x²)3/2) = −(σxl/4ε0)∫x²R²+x² dy/y3/2 = −(σl/2ε0)(x/|x| − x/√(R² + x²)),

that is φ = (σl/2ε0)[x/√(R² + x²) − x/|x|] (taking φ = 0 at infinity; it jumps by σl/ε0 across the plane gap at x = 0).

Ex = −∂φ/∂x = −(σl/2ε0)·R²/(R² + x²)3/2, i.e. Ex = −σlR²/(2ε0(R² + x²)3/2).

Corrected: the printed potential is σxl/(2ε0√(R² + x²)) only, which drops the term −(σl/2ε0)·x/|x| (the lower limit of the integral); that term is a different constant on each side of the planes. The field Ex is unaffected.

Plot of φ(x) (R = 1, φ in units of σl/2ε0):

x/Rφ·2ε₀/(σl)-4-3-2-11234

Teacher's Note: Holes act as oppositely charged discs, i.e. a dipole layer; the lower integration limit gives x/|x|.

Exam Note: Give φ with the jump at x=0, and E_x.

Question 45. An electric capacitor consists of thin round parallel plates, each of radius R, separated by a distance l (l ≪ R) and uniformly charged with surface densities σ and −σ. Find the potential of the electric field and the magnitude of its strength vector at the axes of the capacitor as functions of a distance x from the plates if x ≫ l. Investigate the obtained expressions at x ≫ R.

Solution. For x > 0 we can use the result of the previous problem with σ → −σ (discs instead of holes), taking φ = 0 at infinity:

φ = ±(σl/2ε0)(1 − |x|/√(R² + x²)), the upper sign for x > 0 and the lower sign for x < 0 (there is a discontinuity of potential across the plates, at x = 0, equal to the potential difference σl/ε0 between them).

Ignoring the jump, E = −∂φ/∂x gives

E = σlR²/(2ε0(R² + x²)3/2).

For |x| ≫ R: φ ≈ ±p/(4πε0x²) and E ≈ p/(2πε0|x|³), where p = πR²σl (a dipole field).

Teacher's Note: A thin capacitor is a dipole layer; far away it reduces to a dipole with p = πR²σl.

Exam Note: Give φ, E and the far-field dipole forms.

Question 46. A dipole with an electric moment p is located at a distance r from a long thread charged uniformly with a linear density λ. Find the force F acting on the dipole if the vector p is oriented (a) along the thread; (b) along the radius vector r; (c) at right angles to the thread and the radius vector r.

Solution. Here Er = λ/(2πε0r), Eθ = Ez = 0, and the force on a dipole is F = (p·∇)E = p ∂E/∂l, where ∂/∂l is the derivative along the direction of p.

(a) p along the thread: E does not change as the point of observation moves along the thread, so F = 0.

(b) p along r: F = p(∂Er/∂r)er = −(λp/2πε0r²)er (using ∂er/∂r = 0), i.e. F = −λp/(2πε0r²): magnitude λp/(2πε0r²), directed opposite to p (towards the thread for λ > 0 and p pointing away from it).

(c) p along eθ (perpendicular to the thread and to r): F = p(1/r)(∂/∂θ)[λ/(2πε0r)]er = (pλ/2πε0r²)(∂er/∂θ) = (pλ/2πε0r²)eθ, i.e. F = λp/(2πε0r²): magnitude λp/(2πε0r²), directed along p.

Teacher's Note: Force is p times the field derivative along p; the field of a thread depends only on r.

Exam Note: Three cases: zero, −λp/2πε0r², +λp/2πε0r².

Question 47. Find the interaction force between two water molecules separated by a distance l = 10 nm if their electric moments are oriented along the same straight line. The moment of each molecule equals p = 0.62×10−29 C·m.

Solution. The force on a dipole of moment p in a non-uniform field is F = |p ∂E/∂l|. The field of one dipole at a distance l on its axis is E = p/(2πε0l³), so ∂E/∂l = −3p/(2πε0l⁴). Hence the interaction force is

F = 3p²/(2πε0l⁴) ≈ 2.1×10−16 N.

(Check: 3(0.62×10−29)² = 1.153×10−58; 2πε0 = 5.56×10−11; l⁴ = (10−8)⁴ = 10−32; F = 1.153×10−58/(5.56×10−43) = 2.07×10−16 N.)

Teacher's Note: On-axis dipole field falls as 1/l³, so its gradient gives force ∝ 1/l⁴.

Exam Note: Convert 10 nm to metres; answer 2.1×10⁻¹⁶ N.

Question 48. Find the potential φ(x, y) of an electrostatic field E = a(yi + xj), where a is a constant, i and j are the unit vectors of the x and y axes.

Solution. −dφ = E·dr = a(y dx + x dy) = a d(xy). On integrating, φ = −axy + C.

Note: the statement in the source is garbled ("a(yi xj)"); the form a(yi + xj) is what the printed solution uses.

Teacher's Note: Use dφ = −E·dr; y dx + x dy is the exact differential d(xy).

Exam Note: Add the integration constant C.

Question 49. Find the potential φ(x, y) of an electrostatic field E = 2axyi + a(x² − y²)j, where a is a constant, i and j are the unit vectors of the x and y axes.

Solution. −dφ = E·dr = 2axy dx + a(x² − y²) dy = a d(x²y) − ay² dy.

On integrating, φ = ay(y²/3 − x²) + C.

Note: the printed dot product writes the j-component as 2(x² − y²); it should be (x² − y²) as in the statement, and the printed result agrees with this.

Teacher's Note: Check exactness first; 2xy dx + x² dy = d(x²y), then integrate the leftover −y² dy.

Exam Note: Verify by differentiating: −∇φ must give E.

Question 50. Determine the potential φ(x, y, z) of an electrostatic field E = ayi + (ax + bz)j + byk, where a and b are constants, i, j, k are the unit vectors of the axes x, y, z.

Solution. −dφ = E·dr = ay dx + (ax + bz) dy + by dz = a(y dx + x dy) + b(z dy + y dz) = a d(xy) + b d(yz).

On integrating, φ = −(axy + byz) + C.

Teacher's Note: Group terms into exact differentials d(xy) and d(yz) before integrating.

Exam Note: Always include constant C in the potential.

Question 51. The field potential in a certain region of space depends only on the x coordinate as φ = −ax³ + b, where a and b are constants. Find the distribution of the space charge ρ(x).

Solution. Ex = −∂φ/∂x = 3ax². Using Gauss' theorem in differential form, ∂Ex/∂x = ρ(x)/ε0, so ρ(x) = 6aε0x.

Teacher's Note: Differentiate φ twice: ρ = −ε0 d²φ/dx² (Poisson), so ρ is linear in x.

Exam Note: State ρ(x) = 6aε0x; b does not appear.

Question 52. A uniformly distributed space charge fills up the space between two large parallel plates separated by a distance d. The potential difference between the plates is equal to Δφ. At what value of charge density ρ is the field strength in the vicinity of one of the plates equal to zero? What will then be the field strength near the other plate?

Solution. Between the plates the Poisson equation holds: ∂²φ/∂x² = −ρ0/ε0, where ρ0 is the constant space charge density. Hence φ = −ρ0x²/(2ε0) + Ax + B.

Choose φ(0) = 0 (plate at x = 0), so B = 0. Then φ(d) = Δφ = Ad − ρ0d²/(2ε0), which gives A = Δφ/d + ρ0d/(2ε0).

E = −∂φ/∂x = ρ0x/ε0 − A. The field vanishes near the plate at x = 0 if A = 0, i.e. Δφ/d + ρ0d/(2ε0) = 0, so

ρ0 = −2ε0Δφ/d².

Then the field near the other plate is E(d) = ρ0d/ε0 = −2Δφ/d (magnitude 2Δφ/d).

Teacher's Note: Solve Poisson for φ(x); the zero-field condition at x = 0 fixes the constant A and hence ρ.

Exam Note: Magnitude 2Δφ/d near the other plate.

Question 53. The field potential inside a charged ball depends only on the distance from its centre as φ = ar² + b, where a and b are constants. Find the space charge distribution ρ(r) inside the ball.

Solution. The field is radial: Er = −∂φ/∂r = −2ar. From Gauss' theorem, 4πr²Er = (1/ε0)∫dq, where dq is the charge between spheres of radii r and r + dr:

4πr²(−2ar) = (4π/ε0)∫0r r'²ρ(r') dr'.

Differentiating with respect to r gives ρ = −6ε0a (a constant, i.e. uniformly distributed).

Teacher's Note: Gauss for a sphere of radius r, then differentiate; constant ρ confirms ∇²φ = 6a.

Exam Note: Result is uniform density ρ = −6ε0a.

Download IE Irodov Solutions for JEE Math PDF

Access JEE Mathematics Solutions

Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 16 Constant Electric Field In Vacuum Part 2. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for JEE Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.