CBSE Class 10 Mathematics Surface Areas and Volumes Worksheets Set 05

Class 10 Mathematics Practice Sheet: CBSE Class 10 Mathematics Surface Areas and Volumes Worksheets Set 05

Access comprehensive chapter-wise worksheets for Chapter 12 Surface Areas and Volumes using the CBSE Class 10 Mathematics Surface Areas and Volumes Worksheets Set 05. Designed to align with the 2026-27 academic syllabus for Class 10 Mathematics, these printable practice sets help students reinforce key concepts and improve their overall exam readiness.

Download Chapter 12 Surface Areas and Volumes Worksheet PDF with Answers

Navigate directly to the solved Mathematics worksheets using the digital viewer below. Each practice set includes detailed step-by-step solutions, allowing students to instantly cross-check their work and identify areas requiring further revision.

Surface Areas and Volumes Worksheet: Mensuration Problems

Question 1. The diameter of a metallic sphere is 6 cm. The sphere is melted and drawn into a wire of uniform cross-section. If the length of the wire is 36 m, find its radius.
Answer:
Volume of the sphere = (4/3)π(3)³ = 36π cm³.
Length of wire = 36 m = 3600 cm. π r² × 3600 = 36π, so r² = 0.01.
r = 0.1 cm = 1 mm.
In simple words: The volume of the wire equals the volume of the sphere.

Teacher's Note:
1. Convert the length to cm.
2. Check: π(0.01)(3600) = 36π.

 

Question 2. The ratio between the curved surface area and the total surface area of a right circular cylinder is 1 : 2. Find the volume of the cylinder if its total surface area is 616 cm². (Use π = 22/7.)
Answer:
2πrh/2πr(h + r) = 1/2 gives h = r.
Total surface area = 2πr(2r) = 4πr² = 616, so r² = 49 and r = 7 cm.
Volume = πr²h = (22/7) × 343 = 1078 cm³.
In simple words: The ratio gives h = r.

Teacher's Note:
1. Check: CSA = 2πrh = 308 and TSA = 616.
2. V = πr³.

 

Question 3. A cylindrical tube open at both ends is made of iron 1 cm thick. If its external diameter is 22 cm and its length is 50 cm, find the volume of iron contained in it. (Use π = 22/7.)
Answer:
R = 11 cm, r = 10 cm.
V = π(R² - r²)h = (22/7) × 21 × 50.
V = 3300 cm³.
In simple words: The volume of the metal is the difference of two cylinders.

Teacher's Note:
1. Internal radius = external radius - thickness.
2. R² - r² = 21.

 

Question 4. A well of diameter 7 m has been dug 22.5 m deep. The earth taken out is used to form a circular embankment around it, 1.5 m high. Find the width of the embankment.
Answer:
Volume dug = π(3.5)²(22.5) = 275.625π m³.
Embankment volume = π[(3.5 + w)² - 3.5²] × 1.5.
(3.5 + w)² - 12.25 = 183.75, so (3.5 + w)² = 196 and 3.5 + w = 14.
Width = 10.5 m.
In simple words: Equate the volume of earth dug to the volume of the ring-shaped embankment.

Teacher's Note:
1. The embankment starts at the edge of the well.
2. Check: π(196 - 12.25)(1.5) = 275.625π.

 

Question 5. Water flows at 7 m/s through a circular pipe whose internal diameter is 2 cm into a cylindrical tank whose base radius is 40 cm. Find the increase in the water level in half an hour.
Answer:
Pipe radius = 1 cm. Length of water in 30 minutes = 700 × 1800 = 1,260,000 cm.
Volume = π × 1² × 1260000 = 1,260,000π cm³.
Rise: π × 40² × h = 1260000π, so h = 1260000/1600.
h = 787.5 cm.
In simple words: Volume through the pipe = base area of the pipe × length of the water column.

Teacher's Note:
1. Convert 7 m/s to 700 cm/s.
2. Half an hour = 1800 seconds.

 

Question 6. The cost of painting the total outside surface of a closed cylindrical oil tank at 60 paise per square decimetre is Rs. 237.60. The height of the tank is 6 times the radius of its base. Find the volume correct to two decimal places. (Use π = 22/7.)
Answer:
Area = 237.60/0.60 = 396 dm².
h = 6r, so the total surface area = 2πr(h + r) = 14πr² = 44r² = 396, so r² = 9 and r = 3 dm.
h = 18 dm.
Volume = πr²h = (22/7) × 9 × 18 = 509.14 dm³.
In simple words: Find the total area from the cost, then r.

Teacher's Note:
1. 60 paise = Rs. 0.60.
2. 14π = 44 when π = 22/7.

 

Question 7. Find the volume of the largest right circular cone that can be cut out of a cube whose edge is 9 cm. (Use π = 22/7.)
Answer:
The largest cone has base diameter 9 cm and height 9 cm: r = 4.5 cm.
V = ⅓πr²h = ⅓ × (22/7) × 20.25 × 9.
V ≈ 190.93 cm³ (about 191 cm³).
In simple words: The base of the cone is the inscribed circle of a face.

Teacher's Note:
1. r = 4.5 cm.
2. Height = edge of the cube.

 

Question 8. The internal and external diameters of a hollow spherical shell are 6 cm and 10 cm. If it is melted and recast into a solid cylinder of diameter 14 cm, find the height of the cylinder.
Answer:
Volume of the shell = (4/3)π(5³ - 3³) = (4/3)π(98).
Cylinder: π × 7² × h = 49πh.
49h = 392/3.
h = 8/3 cm.
In simple words: Equate the volumes.

Teacher's Note:
1. Radii: 3 cm and 5 cm.
2. Check: 49 × 8/3 = 130.67 = 392/3.

 

Question 9. A cylindrical tub of radius 12 cm contains water to a depth of 20 cm. A spherical ball of radius 9 cm is dropped into the tub. Find the rise h in the level of the water.
Answer:
Volume of the ball = (4/3)π(9)³ = 972π.
π(12)²h = 972π.
h = 972/144 = 6.75 cm.
In simple words: Volume displaced = volume of the ball.

Teacher's Note:
1. Rise = volume ÷ base area.
2. The ball is fully immersed.

 

Question 10. How many coins 1.75 cm in diameter and 2 mm thick must be melted to form a cuboid 11 cm × 10 cm × 7 cm? (Use π = 22/7.)
Answer:
Volume of one coin = π(0.875)²(0.2) = (22/7)(0.765625)(0.2) = 0.48125 cm³.
Volume of the cuboid = 11 × 10 × 7 = 770 cm³.
Number of coins = 770/0.48125.
1600 coins.
In simple words: Divide the volume of the cuboid by the volume of one coin.

Teacher's Note:
1. 2 mm = 0.2 cm.
2. The radius is 0.875 cm.

 

Question 11. A tent of height 77 dm is in the form of a right circular cylinder of diameter 36 m and height 44 dm, surmounted by a right circular cone. Find the cost of the canvas at Rs. 3.50 per m². (Use π = 22/7.)
Answer:
Radius = 18 m. Height of the cylinder = 4.4 m. Height of the cone = 7.7 - 4.4 = 3.3 m.
Slant height of the cone = √(18² + 3.3²) = √334.89 = 18.3 m.
Canvas = 2πrh + πrl = (22/7)(18)(8.8 + 18.3) = (22/7)(18)(27.1) = 1533.09 m².
Cost = 1533.09 × 3.50 = Rs. 5365.80.
In simple words: Add the curved surface areas of the cylinder and the cone.

Teacher's Note:
1. The cylinder has no top because the cone covers it.
2. 77 dm = 7.7 m.

 

Question 12. The interior of a building is in the form of a cylinder of diameter 4.3 m and height 3.8 m, surmounted by a cone whose vertical angle is 90°. Find the surface area of the interior of the building. (Use π = 22/7.)
Answer:
r = 2.15 m. Vertical angle 90° means the semi-vertical angle is 45°, so the height of the cone = r and the slant height l = r√2 = 3.04 m.
Curved surface of the cylinder = 2πrh = 2 × (22/7) × 2.15 × 3.8 = 51.36 m².
Curved surface of the cone = πrl = (22/7) × 2.15 × 3.04 = 20.54 m².
Total interior surface ≈ 71.9 m².
In simple words: Add the curved areas of the cylinder and the cone.

Teacher's Note:
1. The floor is not included.
2. With π = 3.14 the answer is about 71.8 m².

 

Question 13. A solid consists of a cylinder with a cone at one end and a hemisphere at the other. The total length of the solid is 20 cm, the common diameter is 7 cm and the height of the cylindrical portion is 4.5 cm. Find the total surface area of the solid. (Use π = 22/7.)
Answer:
r = 3.5 cm. Height of the cone = 20 - 4.5 - 3.5 = 12 cm. Slant height l = √(144 + 12.25) = 12.5 cm.
Hemisphere: 2πr² = 2π(12.25) = 24.5π. Cylinder: 2πrh = 2π(3.5)(4.5) = 31.5π. Cone: πrl = π(3.5)(12.5) = 43.75π.
Total = (24.5 + 31.5 + 43.75)π = 99.75π.
= 99.75 × 22/7 = 313.5 cm².
In simple words: Add the curved surface areas of the three parts.

Teacher's Note:
1. No flat faces remain.
2. Find the height of the cone from the total length.

 

Question 14. If a cone of radius 10 cm is divided into two parts by a plane through the midpoint of its axis parallel to the base, compare the volumes of the two parts.
Answer:
The small cone cut off is similar to the whole cone with ratio 1/2, so its volume is 1/8 of the whole.
Volume of the frustum = 1 - 1/8 = 7/8 of the whole.
Volume of small cone : volume of frustum = 1 : 7.
In simple words: Volumes of similar cones are in the ratio of the cubes of their heights.

Teacher's Note:
1. The radius 10 cm does not affect the ratio.
2. 1/8 : 7/8 = 1 : 7.

 

Question 15. By melting a solid cylindrical metal, a few conical pieces are made. If three times the radius of a cone equals twice the radius of the cylinder and the ratio of the height of the cylinder to that of the cone is 4 : 3, find the number of cones.
Answer:
Cylinder: radius R, height 4k. Cone: radius 2R/3, height 3k.
Cylinder = 4πR²k; cone = ⅓π(4R²/9)(3k) = (4/9)πR²k.
Number of cones = 4/(4/9) = 9.
In simple words: Divide the volume of the cylinder by that of one cone.

Teacher's Note:
1. Use R and k as common factors.
2. Check: 9 cones × 4/9 = 4.

 

Question 16. A cylindrical boiler 2 m high has diameter 3.5 m and a hemispherical lid. Find the volume of its interior, including the part covered by the lid. (Use π = 22/7.)
Answer:
r = 1.75 m. Cylinder: πr²h = (22/7)(3.0625)(2) = 19.25 m³.
Hemisphere: ⅔πr³ = ⅔ × (22/7) × 5.359 = 11.23 m³.
Total = 30.48 m³.
In simple words: Add the volumes of the cylinder and the hemisphere.

Teacher's Note:
1. Interior volume has no thickness.
2. 1.75³ = 5.359.

 

Question 17. An ice-cream cone is a right circular cone of height 14 cm and top diameter 5 cm with a hemispherical scoop of the same diameter on top. Find the volume of ice cream. (Use π = 22/7.)
Answer:
Cone: ⅓πr²h = ⅓ × (22/7) × 6.25 × 14 = 91.67 cm³.
Hemisphere: ⅔πr³ = ⅔ × (22/7) × 15.625 = 32.74 cm³.
Total = 124.4 cm³.
In simple words: Add the volumes of the cone and the hemispherical scoop.

Teacher's Note:
1. r = 2.5 cm.
2. The scoop sits on top of the cone.

 

Question 18. A godown is in the form of a cuboid 10 m long, 7 m wide and 3 m high (inner measurements), surmounted along its length by half of a cylinder of radius 3.5 m. Find (i) the volume of the godown and (ii) the total internal surface area excluding the floor.
Answer:
(i) Cuboid: 10 × 7 × 3 = 210 m³. Half cylinder: ½π(3.5)²(10) = 192.5 m³. Total = 402.5 m³.
(ii) Two long walls: 2 × 10 × 3 = 60 m². Curved roof: π(3.5)(10) = 110 m². Two end walls: each is a 7 × 3 rectangle plus a semicircle: 2(21 + ½π(3.5)²) = 2(21 + 19.25) = 80.5 m².
Total = 60 + 110 + 80.5 = 250.5 m².
(i) 402.5 m³; (ii) 250.5 m².
In simple words: Split the godown into a cuboid and a half cylinder.

Teacher's Note:
1. The roof is half of the curved surface of a cylinder: πrl.
2. Do not include the floor.

 

Question 19. The diameter of a copper sphere is 18 cm. The sphere is melted and drawn into a long wire of uniform circular cross-section. If the length of the wire is 108 m, find its diameter.
Answer:
Volume of the sphere = (4/3)π(9)³ = 972π cm³. Length of wire = 10800 cm.
πr² × 10800 = 972π, so r² = 0.09 and r = 0.3 cm.
Diameter = 0.6 cm.
In simple words: Equate the volume of the sphere with that of the wire.

Teacher's Note:
1. Convert 108 m to cm.
2. Diameter = 2r.

 

Question 20. The height of a cone is 30 cm. A small cone is cut off at the top by a plane parallel to the base. If its volume is 1/27 of the volume of the given cone, at what height above the base is the section made?
Answer:
(h/30)³ = 1/27, so h/30 = 1/3 and h = 10 cm.
Height above the base = 30 - 10 = 20 cm.
The section is made 20 cm above the base.
In simple words: Use the ratio of volumes of similar cones.

Teacher's Note:
1. The small cone's height is measured from the apex.
2. Cube root of 1/27 is 1/3.

 

Question 21. A bucket of height 8 cm is made of copper sheet in the form of a frustum of a right circular cone with radii of its lower and upper ends 3 cm and 9 cm. Find (i) the height of the cone of which the bucket is a part, (ii) the volume of water which can be filled in the bucket, (iii) the area of copper sheet required to make the bucket (in terms of π; the bucket is open at the top).
Answer:
(i) The cone has height H with (H - 8)/H = 3/9, so H = 12 cm.
(ii) V = ⅓π(8)(81 + 27 + 9) = ⅓π(8)(117) = 312π cm³.
(iii) Slant height l = √(8² + 6²) = 10 cm. Curved area = π(9 + 3)(10) = 120π. Base = π(3)² = 9π. Total = 129π cm².
(i) 12 cm; (ii) 312π cm³; (iii) 129π cm².
In simple words: Use similar triangles for the height and the frustum formulas for the rest.

Teacher's Note:
1. The bucket has a base but no lid.
2. The slant height is from the right triangle with legs 8 and 6.

 

Question 22. A cylindrical tub of radius 5 cm and length 9.8 cm is full of water. A solid in the form of a right circular cone mounted on a hemisphere is immersed in the tub. The radius of the hemisphere is 3.5 cm and the height of the cone outside the hemisphere is 5 cm. Find the volume of water left in the tub. (Use π = 22/7.)
Answer:
Volume of the tub = π(25)(9.8) = 245π = 770 cm³.
Volume of the solid = ⅔π(3.5)³ + ⅓π(3.5)²(5) = π(28.583 + 20.417) = 49π = 154 cm³.
Water left = 770 - 154 = 616 cm³.
In simple words: Water left = volume of tub minus volume of the solid.

Teacher's Note:
1. The solid is completely immersed.
2. Volume of the solid = hemisphere + cone.

 

Question 23. A sector of a circle of radius 15 cm has the angle 120°. It is rolled up so that the two bounding radii are joined together to form a cone. Find the volume of the cone. (Use π = 22/7.)
Answer:
Slant height = 15 cm. The arc length of the sector = (120/360) × 2π × 15 = 10π = circumference of the base, so r = 5 cm.
Height h = √(15² - 5²) = √200 = 14.14 cm.
V = ⅓πr²h = ⅓ × (22/7) × 25 × 14.14 ≈ 370.33 cm³.
In simple words: The arc of the sector becomes the circumference of the base.

Teacher's Note:
1. Radius of the sector = slant height of the cone.
2. √200 = 14.14.

 

Question 24. The internal and external radii of a hollow sphere are 3 cm and 5 cm. The sphere is melted to form a solid cylinder of height 2 2/3 cm. Find the diameter and the curved surface area of the cylinder. (Use π = 22/7.)
Answer:
Volume of the shell = (4/3)π(125 - 27) = 392π/3. πr²(8/3) = 392π/3 gives r² = 49 and r = 7 cm.
Diameter = 14 cm. CSA = 2πrh = 2 × (22/7) × 7 × 8/3 = 352/3 = 117.33 cm².
Diameter = 14 cm; CSA = 117.33 cm².
In simple words: Equate the volumes to find r.

Teacher's Note:
1. Convert 2 2/3 to 8/3.
2. Check: 49 × 8/3 = 392/3.

Chapter 12 Surface Areas and Volumes Printable Worksheets and Exercises for Class 10 Mathematics

Mastering Chapter 12 Surface Areas and Volumes with Printable Worksheets

Access structured practice worksheets for Chapter 12 Surface Areas and Volumes aligned with the 2026 CBSE curriculum. These downloadable exercises for Class 10 Mathematics help students build accuracy and reinforce core concepts for upcoming school tests.

Verified Solutions and NCERT Alignment

Built using official NCERT guidelines for Class 10 Mathematics, these practice sheets provide reliable academic support. Cross-reference your completed work with our detailed solutions to learn standard answer-writing formats for CBSE exams.

Additional Study Resources for Class 10 Mathematics

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of free, up-to-date printable assignments to maximize your academic results in upcoming CBSE evaluations.

FAQs

Where can I download the 2026-27 CBSE printable worksheets for Class 10 Mathematics Chapter 12 Surface Areas and Volumes?

You can download the latest chapter-wise printable worksheets for Class 10 Mathematics Chapter 12 Surface Areas and Volumes for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.

Are these Chapter 12 Surface Areas and Volumes Mathematics worksheets based on the new competency-based education (CBE) model?

Yes, Class 10 Mathematics worksheets for Chapter 12 Surface Areas and Volumes focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.

Do the Class 10 Mathematics Chapter 12 Surface Areas and Volumes worksheets have answers?

Yes, we have provided solved worksheets for Class 10 Mathematics Chapter 12 Surface Areas and Volumes to help students verify their answers instantly.

Can I print these Chapter 12 Surface Areas and Volumes Mathematics test sheets?

Yes, our Class 10 Mathematics test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.

What is the benefit of solving chapter-wise worksheets for Mathematics Class 10 Chapter 12 Surface Areas and Volumes?

For Chapter 12 Surface Areas and Volumes, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.