CBSE Class 10 Mathematics Surface Areas and Volumes Important Questions Set 15

Advanced Study Material for Class 10 Mathematics: Chapter 12 Surface Areas and Volumes

Explore structured advanced study materials through the CBSE Class 10 Mathematics Surface Areas and Volumes Important Questions Set 15. Tailored for Class 10 learners, utilizing these Mathematics resources ensures thorough preparation and strengthens foundational knowledge before final CBSE evaluations.

Practice Class 10 Mathematics Resources: Chapter 12 Surface Areas and Volumes

Access the complete useful resource PDF for Class 10 Mathematics below. Regular practice with these targeted academic notes builds familiarity with complex topics and helps secure higher marks in final school evaluations.

NTSE Problems on Surface Areas and Volumes: Part 2

 

NTSE Question 31 [Chattisgarh NTSE Stage-1 2014]. How many surfaces are there in a solid cylinder :
(A) 1   (B) 2   (C) 3   (D) 4

Answer:
Ans. (C) 3
A solid cylinder has two flat circular faces and one curved surface, so 3 surfaces.

Teacher's Note:
1. Count the flat and the curved faces separately.

 

NTSE Question 32 [Chattisgarh NTSE Stage-1 2014]. The areas of three adjoining faces of a cuboid are A, B and C respectively; then its volume will be :
(A) ABC   (B) √(ABC)   (C) A²B²C²   (D) none of these

Answer:
Ans. (B) √(ABC)
A = ℓb, B = bh, C = hℓ ⇒ ABC = (ℓbh)² ⇒ V = √(ABC).

Teacher's Note:
1. Multiply the three face areas to get V².

 

NTSE Question 33 [Jharkhand NTSE Stage-1 2014]. Water flows at the rate of 10 metres per minute from a cylindrical pipe 5 mm in diameter. The time taken to fill a conical vessel, whose diameter at the base is 40 cm and depth 24 cm, is :
(A) 55 minute   (B) 52 minute 1 sec.   (C) 51 minutes 12 sec.   (D) 48 minutes 15 sec.

Answer:
Ans. (C) 51 minutes 12 sec.
Flow per minute = π(0.25)²(1000) = 62.5π cm³. Cone = \( \dfrac{1}{3}\pi (20)^2 (24) \) = 3200π cm³.
Time = \( \dfrac{3200}{62.5} \) = 51.2 min = 51 min 12 s.

Teacher's Note:
1. 0.2 minute = 12 seconds.

 

NTSE Question 34 [Maharashtra NTSE Stage-1 2014]. One solid hemisphere is melted into a solid sphere. What is the ratio of the radius of the solid sphere to the radius of the solid hemisphere?
(A) ∛2 : 1   (B) 8 : 1   (C) 1 : ∛2   (D) 1 : 8

Answer:
Ans. (C) 1 : ∛2
\( \dfrac{4}{3}\pi R^3 = \dfrac{2}{3}\pi r^3 \Rightarrow R^3 = \dfrac{r^3}{2} \Rightarrow \dfrac{R}{r} = \dfrac{1}{\sqrt[3]{2}} \).
So R : r = 1 : ∛2.

Teacher's Note:
1. The sphere needs only half the volume of a sphere of radius r.

 

NTSE Question 35 [Delhi NTSE Stage-1 2014]. The diameter of a right circular cylinder is decreased by 10%. The volume of the cylinder remains the same; then the percentage increase in height is :
(A) 20%   (B) 23.45%   (C) 5%   (D) 20.5%

Answer:
Ans. (B) 23.45%
(0.9)² h′ = h ⇒ h′ = \( \dfrac{h}{0.81} \) = 1.2346 h.
Increase = 23.45%.

Teacher's Note:
1. Volume depends on the square of the diameter.

 

NTSE Question 36 [Raj. NTSE Stage-1 2014]. The ratio of the volume of a cube to that of a sphere which exactly fits inside the cube is
(A) 6 : π   (B) π : 6   (C) π : 12   (D) 12 : π

Answer:
Ans. (A) 6 : π
Sphere inside the cube has diameter a. Cube : sphere = a³ : \( \dfrac{\pi a^3}{6} \) = 6 : π.

Teacher's Note:
1. The inscribed sphere has diameter equal to the edge.

 

NTSE Question 37 [Raj. NTSE Stage-1 2015]. If the heights and radii of a cone and a hemisphere are the same then the ratio of their volumes is
(A) 1 : 2   (B) 2 : 3   (C) 1 : 3   (D) 1 : 1

Answer:
Ans. (A) 1 : 2
For a hemisphere h = r. Cone : hemisphere = \( \dfrac{1}{3}\pi r^3 : \dfrac{2}{3}\pi r^3 \) = 1 : 2.

Teacher's Note:
1. Height of a hemisphere = its radius.

 

NTSE Question 38 [Raj. NTSE Stage-1 2015]. If a cylinder of radius 3 cm and height 10 cm is melted and recast into the shapes of small spheres of diameter 1 cm, then the number of spheres so formed is
(A) 135   (B) 270   (C) 540   (D) 1080

Answer:
Ans. (C) 540
Volume of cylinder = π(9)(10) = 90π. Volume of sphere = \( \dfrac{4}{3}\pi (0.5)^3 = \dfrac{\pi}{6} \).
Number = 90 × 6 = 540.

Teacher's Note:
1. Divide the cylinder volume by one sphere's volume.

 

NTSE Question 39 [Jharkhand NTSE Stage-1 2015]. A metallic spherical shell of internal and external diameters 4 cm and 8 cm respectively is melted and recast into the form of a cone of base diameter 8 cm. The height of the cone is
(A) 12 cm   (B) 14 cm   (C) 15 cm   (D) 18 cm

Answer:
Ans. (B) 14 cm
Shell volume = \( \dfrac{4}{3}\pi (4^3 - 2^3) = \dfrac{224\pi}{3} \). Cone: \( \dfrac{1}{3}\pi (4)^2 h = \dfrac{16\pi h}{3} \).
h = 14 cm.

Teacher's Note:
1. Work with radii (2 cm and 4 cm), not diameters.

 

NTSE Question 40 [MP NTSE Stage-1 2015]. A rectangular sheet of dimensions 1.57 m × 4.16 m was brought to form ice-cream cones of radius 2.5 cm and height 6 cm. How many ice-cream cones can be prepared from it? (Take π = 3.14)
(A) 320   (B) 1280   (C) 640   (D) 512

Answer:
Ans. (B) 1280
Slant height of a cone = \( \sqrt{2.5^2 + 6^2} \) = 6.5 cm. C.S.A. = 3.14 × 2.5 × 6.5 = 51.025 cm².
Area of sheet = 157 × 416 = 65312 cm². Number = \( \dfrac{65312}{51.025} \) = 1280.

Teacher's Note:
1. An ice-cream cone needs only the curved surface.

 

NTSE Question 41 [Raj. NTSE Stage-1 2016]. If the areas of three adjoining faces of a cuboid are a², b² and c² respectively, then the volume of the cuboid is
(A) a²b²c²   (B) abc   (C) a³b³c³   (D) √(abc)

Answer:
Ans. (B) abc
V² = a² × b² × c² ⇒ V = abc.

Teacher's Note:
1. V² is the product of the three adjoining face areas.

 

NTSE Question 42 [Delhi NTSE Stage-1 2016]. An empty pool being filled with water at a constant rate takes 8 hours to fill \( \dfrac{3}{5} \)th of its capacity. How much more time will it take to finish filling the pool?
(A) 5 hours 30 minutes   (B) 5 hours 20 minutes   (C) 4 hours 48 minutes   (D) 4 hours 50 minutes

Answer:
Ans. (B) 5 hours 20 minutes
3/5 of the pool takes 8 h, so 1/5 takes \( \dfrac{8}{3} \) h. The remaining 2/5 takes \( \dfrac{16}{3} \) h.
\( \dfrac{16}{3} \) h = 5 hours 20 minutes.

Teacher's Note:
1. Use the unitary method on the fraction filled.

 

NTSE Question 43 [Bihar NTSE Stage-1 2016]. If the volumes of two cubes are in the ratio 27 : 64, then the ratio of their total surface areas is
(A) 27 : 64   (B) 3 : 4   (C) 9 : 16   (D) 3 : 8

Answer:
Ans. (C) 9 : 16
Edges are in the ratio 3 : 4, so surface areas are in the ratio 9 : 16 = 9 : 16.

Teacher's Note:
1. Area ratio is the square of the edge ratio.

 

NTSE Question 44 [Delhi NTSE Stage-1 2016]. The volume and whole surface area of a cylindrical solid of radius ‘r’ units are v and s respectively. If the height of the cylinder is 1 unit then v/s is equal to
(A) (1/2)(1 − 1/(r + 1))   (B) (1/2)(1 + 1/(r + 1))   (C) (1/2)(1 − 1/r)   (D) (1/2)(1 + 1/r)

Answer:
Ans. (A) (1/2)(1 − 1/(r + 1))
v = πr², s = 2πr(1 + r). \( \dfrac{v}{s} = \dfrac{r}{2(r + 1)} = \dfrac{1}{2}\left( 1 - \dfrac{1}{r + 1} \right) \).

Teacher's Note:
1. Write r/(r + 1) as 1 − 1/(r + 1).

 

NTSE Question 45 [Delhi NTSE Stage-1 2016]. If the height of a right circular cylinder is increased by 10% while the radius of base is decreased by 10%, then the curved surface area of the cylinder
(A) Remains same   (B) Decreases by 1%   (C) Increases by 1%   (D) Increases by 0.1%

Answer:
Ans. (B) Decreases by 1%
C.S.A. ∝ r h. New value = 0.9 × 1.1 = 0.99 of the original.
So it decreases by 1%.

Teacher's Note:
1. C.S.A. changes by the product of the two factors.

 

NTSE Question 46 [Maharashtra NTSE Stage-1 2016]. A roller of diameter 1.4 m and length 1.4 m is used to press the ground having area 3080 sq. m. Find the number of revolutions that the roller will make to press the ground.
(A) 7000   (B) 500   (C) 1000   (D) 800

Answer:
Ans. (B) 500
Area covered in one revolution = C.S.A. = 2 × \( \dfrac{22}{7} \) × 0.7 × 1.4 = 6.16 m².
Revolutions = \( \dfrac{3080}{6.16} \) = 500.

Teacher's Note:
1. One revolution presses an area equal to the curved surface of the roller.

 

NTSE Question 47 [MP NTSE Stage-1 2016]. The volume of a cube is 2744 cm³, its surface area is :
(A) 196 cm²   (B) 1176 cm²   (C) 784 cm²   (D) 588 cm²

Answer:
Ans. (B) 1176 cm²
a³ = 2744 ⇒ a = 14. Surface area = 6 × 14² = 1176 cm².

Teacher's Note:
1. 2744 = 14³.

 

NTSE Question 48 [MP NTSE Stage-1 2016]. If r is the radius of the base of a cylinder and h is the height of the cylinder, then total surface area will be :
(A) 2πrh   (B) 2πrh + 2πr²   (C) πr²h   (D) None of these

Answer:
Ans. (B) 2πrh + 2πr²
T.S.A. = C.S.A. + two bases = 2πrh + 2πr² = 2πr(h + r).

Teacher's Note:
1. Do not forget the two circular ends.

 

NTSE Question 49 [Maharashtra NTSE Stage-1 2017]. The side of a cube is increased by 50%. What per cent increase will be in the area of the vertical faces of the cube?
(A) 125%   (B) 150%   (C) 100%   (D) 50%

Answer:
Ans. (A) 125%
Vertical faces = 4a². New area = 4(1.5a)² = 2.25 × 4a².
Increase = 125%.

Teacher's Note:
1. Area scales as the square of the side.

 

NTSE Question 50 [Maharashtra NTSE Stage-1 2017]. The radius of a cylindrical vessel is 7 cm and its height is 12 cm. \( \dfrac{2}{3} \) of the vessel is filled with water. A sphere having radius 6 cm is dropped into the water. Find the volume of the water that will come out of the vessel.
(A) 196π cm³   (B) 92π cm³   (C) 288π cm³   (D) 588π cm³

Answer:
Ans. (B) 92π cm³
Capacity = π(49)(12) = 588π. Water = \( \dfrac{2}{3} \) × 588π = 392π. Sphere = \( \dfrac{4}{3}\pi (216) \) = 288π.
Total = 680π > 588π, so water coming out = 680π − 588π = 92π cm³.

Teacher's Note:
1. Only the volume above the capacity overflows.

 

NTSE Question 51 [MP NTSE Stage-1 2017]. The length of the longest pole that can be kept in a room of size 12 m × 9 m × 8 m is :
(A) 29 m   (B) 17 m   (C) 21 m   (D) 19 m

Answer:
Ans. (B) 17 m
Longest pole = diagonal = \( \sqrt{144 + 81 + 64} = \sqrt{289} \) = 17 m.

Teacher's Note:
1. The longest pole lies along the space diagonal.

 

NTSE Question 52 [MP NTSE Stage-1 2017]. The height of a cylinder is 14 cm and its curved surface area is 264 cm², the volume of the cylinder is :
(A) 308 cm³   (B) 396 cm³   (C) 1232 cm³   (D) 1848 cm³

Answer:
Ans. (B) 396 cm³
2πr(14) = 264 ⇒ r = 3 cm. V = \( \dfrac{22}{7} \times 9 \times 14 \) = 396 cm³.

Teacher's Note:
1. Find r from the curved surface area first.

 

NTSE Question 53 [Rajasthan NTSE Stage-I 2018]. A cube of edge 1 cm is cut from a corner of a solid cube of edge 5 cm. What is the total surface area of the solid remained?
(A) 150 cm²   (B) 149 cm²   (C) 151 cm²   (D) 147 cm²

Answer:
Ans. (A) 150 cm²
Removing a corner cube takes away 3 unit faces from the surface but exposes 3 new unit faces.
Surface area stays 6 × 25 = 150 cm².

Teacher's Note:
1. A corner cut does not change the surface area.

 

NTSE Question 54 [MP NTSE Stage-I 2018]. If the side of each cube is 3 cm, then the volume of the given figure is :
(A) 3 cm³   (B) 27 cm³   (C) 15 cm³   (D) 405 cm³
Answer:
Ans. (D) 405 cm³
The figure is a staircase of 5 + 4 + 3 + 2 + 1 = 15 cubes.
Volume of one cube = 27 cm³, so V = 15 × 27 = 405 cm³.

Teacher's Note:
1. Count the cubes column by column.

 

NTSE Question 55 [MP NTSE Stage-I 2018]. The length of the minute hand of a clock is 14 cm. The area formed by this hand in 5 minutes is :
(A) 154/3   (B) 154   (C) 215/3   (D) 205/3

Answer:
Ans. (A) 154/3
In 5 minutes the hand turns through 30°, so the area swept = \( \dfrac{30}{360} \times \dfrac{22}{7} \times 14^2 \) = 154/3 cm².

Teacher's Note:
1. 5 minutes is one twelfth of a full turn.

Mathematics Class 10 Exam Resources: Chapter 12 Surface Areas and Volumes

Essential Notes for Class 10 Mathematics

Explore essential learning tools for Class 10 Mathematics Chapter 12 Surface Areas and Volumes. This curated collection features in-depth notes and targeted practice questions built around the active 2026 curriculum to streamline your daily revision.

Verified Solutions for Class 10 Mathematics

Built using official NCERT guidelines for Class 10 Mathematics, these materials provide reliable academic support. Integrating past examination questions and step-by-step solutions helps students understand official CBSE grading criteria.

Enhance Accuracy with Online Tests

Maximize your grade potential by utilizing Class 10 Mathematics practice papers in tandem with these structured notes. All printable assignments and interactive mock tests on our platform are updated for the 2026 session and available free of charge.

FAQs

Where can I find the most advanced study material for CBSE Class 10 Mathematics for 2026-27?

The latest 2026-27 advanced study resources for Class 10 Mathematics are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.

What does the 2026-27 Mathematics study package for Class 10 include?

Our exhaustive Class 10 Mathematics package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.

Is this study material enough for both CBSE exams and competitive tests?

Yes. For Class 10, our resources have been developed to help you get better marks in CBSE school exams and also build fundamental strength needed for entrance tests including Competency Based learning.

How should Class 10 students use this Mathematics material for maximum marks?

in Class 10, students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.

Can I download Class 10 Mathematics study notes in PDF for offline use?

All CBSE Mathematics study materials are provided in mobile-friendly PDF. You can download and save them on your device.

Are the Class 10 Mathematics resources updated for the latest NEP guidelines?

Yes, our team has ensured that all Mathematics materials for Class 10 are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 CBSE syllabus.