CBSE Class 10 Mathematics Surface Areas and Volumes Important Questions Set 07

Advanced Study Material for Class 10 Mathematics: Chapter 12 Surface Areas and Volumes

Review targeted academic resources with the CBSE Class 10 Mathematics Surface Areas and Volumes Important Questions Set 07. Built according to official CBSE standards for the 2026-27 term, these downloadable Class 10 Mathematics study materials support effective daily practice and deeper conceptual understanding for Chapter 12 Surface Areas and Volumes.

Practice Class 10 Mathematics Resources: Chapter 12 Surface Areas and Volumes

View or download the dedicated CBSE Class 10 Mathematics Surface Areas and Volumes Important Questions Set 07 resource below. Engaging with these advanced study guides under focused conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Chapter 12 Surface Areas and Volumes.

Surface Areas and Volumes: Conversion of Solids and Flow of Water

Question 1. A solid metallic cuboid of dimensions 9 m × 8 m × 2 m is melted and recast into solid cubes of edge 2 m. Find the number of cubes so formed.
Answer:
Volume of the cuboid = 9 × 8 × 2 = 144 m³. Volume of one cube = 2 × 2 × 2 = 8 m³.
Number of cubes = \( \dfrac{144}{8} \) = 18.
In simple words: When a solid is melted and recast, the total volume stays the same.

Teacher's Note:
1. Number of pieces = volume of the large solid ÷ volume of one piece.
2. Melting does not change volume.

 

Question 2. A cone of height 20 cm and radius of base 5 cm is made up of modelling clay. A child reshapes it in the form of a sphere. Find the diameter of the sphere.
Answer:
Volume of the cone = \( \dfrac{1}{3}\pi (5)^2 (20) \) = \( \dfrac{500}{3}\pi \) cm³.
Volume of the sphere = \( \dfrac{4}{3}\pi R^3 \). Equating: \( \dfrac{4}{3}\pi R^3 = \dfrac{500}{3}\pi \), so R³ = 125 and R = 5 cm.
Diameter of the sphere = 2R = 10 cm.
In simple words: Equate the volume of the cone to that of the sphere.

Teacher's Note:
1. The factor π/3 cancels on both sides.
2. Diameter = 2 × radius.

 

Question 3. Metallic spheres of radii 6 cm, 8 cm and 10 cm respectively are melted to form a single solid sphere. Find the radius of the resulting sphere.
Answer:
Total volume = \( \dfrac{4}{3}\pi (6^3 + 8^3 + 10^3) \) = \( \dfrac{4}{3}\pi (216 + 512 + 1000) \) = \( \dfrac{4}{3}\pi \times 1728 \).
If the new radius is R: \( \dfrac{4}{3}\pi R^3 = \dfrac{4}{3}\pi \times 1728 \), so R³ = 1728 and R = 12 cm.
In simple words: Sum the cubes of the radii and take the cube root.

Teacher's Note:
1. 12³ = 1728.
2. The common factor 4π/3 cancels.

 

Question 4. A solid metal cone with radius of base 12 cm and height 24 cm is melted to form solid spherical balls of diameter 6 cm each. Find the number of balls thus formed.
Answer:
Volume of the cone = \( \dfrac{1}{3}\pi (12)^2 (24) = 1152\pi \) cm³.
Radius of each ball = 3 cm, so the volume of one ball = \( \dfrac{4}{3}\pi (3)^3 = 36\pi \) cm³.
Number of balls = \( \dfrac{1152\pi}{36\pi} \) = 32.
In simple words: Number of balls = volume of the cone ÷ volume of one ball.

Teacher's Note:
1. Convert diameter to radius first.
2. 1152 ÷ 36 = 32.

 

Question 5. The radii of the internal and external surfaces of a hollow spherical shell are 3 cm and 5 cm respectively. It is melted and recast into a solid cylinder of diameter 14 cm. Find the height of the cylinder.
Answer:
Volume of the shell = \( \dfrac{4}{3}\pi (5^3 - 3^3) = \dfrac{4}{3}\pi \times 98 \) cm³.
Radius of the cylinder = 7 cm. Volume = \( \pi (7)^2 h = 49\pi h \).
So \( 49\pi h = \dfrac{4}{3}\pi \times 98 \), giving \( h = \dfrac{8}{3} \).
Height of the cylinder = \( 2\dfrac{2}{3} \) cm.
In simple words: Volume of a hollow shell = outer sphere volume minus inner sphere volume.

Teacher's Note:
1. Use external radius 5 and internal radius 3.
2. 8/3 = 2 2/3.

 

Question 6. The internal and external diameters of a hollow hemispherical shell are 6 cm and 10 cm respectively. It is melted and recast into a solid cone of base diameter 14 cm. Find the height of the cone so formed.
Answer:
Radii: internal r = 3 cm and external R = 5 cm.
Volume of the shell = \( \dfrac{2}{3}\pi (R^3 - r^3) = \dfrac{2}{3}\pi (125 - 27) = \dfrac{196}{3}\pi \) cm³.
Cone: radius 7 cm, volume = \( \dfrac{1}{3}\pi (7)^2 h = \dfrac{49}{3}\pi h \).
Equating: \( \dfrac{49}{3}h = \dfrac{196}{3} \), so h = 4 cm.
In simple words: A hemispherical shell has two-thirds (not four-thirds) of π in its volume formula.

Teacher's Note:
1. Volume of a hemisphere = (2/3)πr³.
2. Convert diameters to radii first.

 

Question 7. A copper rod of diameter 2 cm and length 10 cm is drawn into a wire of uniform thickness and length 10 m. Find the thickness of the wire.
Answer:
Volume of the rod = π(1)²(10) = 10π cm³.
Length of the wire = 10 m = 1000 cm. Let its radius be r: πr²(1000) = 10π, so r² = 0.01 and r = 0.1 cm.
Thickness (diameter) = 2 × 0.1 = 0.2 cm = 2 mm.
In simple words: A wire is a very long thin cylinder; keep the volume the same.

Teacher's Note:
1. Convert 10 m to 1000 cm.
2. Thickness means diameter.

 

Question 8. A hemispherical bowl of internal diameter 30 cm contains some liquid. This liquid is to be filled into cylindrical-shaped bottles each of diameter 5 cm and height 6 cm. Find the number of bottles necessary to empty the bowl.
Answer:
Volume of the liquid (hemisphere, r = 15 cm) = \( \dfrac{2}{3}\pi (15)^3 = 2250\pi \) cm³.
Volume of one bottle (r = 2.5 cm, h = 6 cm) = \( \pi (2.5)^2 (6) = 37.5\pi \) cm³.
Number of bottles = \( \dfrac{2250\pi}{37.5\pi} \) = 60.
In simple words: Divide the volume of the liquid by the volume of one bottle.

Teacher's Note:
1. Use radius 15 for the bowl (diameter 30).
2. 2250 ÷ 37.5 = 60.

 

Question 9. A solid metallic sphere of diameter 21 cm is melted and recast into a number of smaller cones, each of diameter 3.5 cm and height 3 cm. Find the number of cones so formed.
Answer:
Volume of the sphere (r = 10.5) = \( \dfrac{4}{3}\pi (10.5)^3 \).
Volume of one cone (r = 1.75, h = 3) = \( \dfrac{1}{3}\pi (1.75)^2 (3) = \pi (1.75)^2 \).
Number of cones = \( \dfrac{\frac{4}{3}(10.5)^3}{(1.75)^2} = \dfrac{4}{3} \times \dfrac{1157.625}{3.0625} \) = 504.
In simple words: Divide the volume of the sphere by the volume of one cone.

Teacher's Note:
1. 10.5 = 6 × 1.75, so the ratio simplifies: (4/3) × 6³ × 1.75 = 504.
2. The π terms cancel.

 

Question 10. A spherical cannon ball 28 cm in diameter is melted and recast into a right circular conical mould, the base of which is 35 cm in diameter. Find the height of the cone.
Answer:
Volume of the ball (r = 14) = \( \dfrac{4}{3}\pi (14)^3 \).
Volume of the cone (r = 17.5) = \( \dfrac{1}{3}\pi (17.5)^2 h \).
Equating: \( h = \dfrac{4 \times 14^3}{17.5^2} = \dfrac{4 \times 2744}{306.25} \) = 35.84 cm.
In simple words: Equate the volume of the ball and the cone.

Teacher's Note:
1. The π/3 factor cancels.
2. Check with fractions: 17.5 = 35/2.

 

Question 11. A spherical shell of lead whose external and internal diameters are respectively 24 cm and 18 cm is melted and recast into a right circular cylinder 37 cm high. Find the diameter of the base of the cylinder.
Answer:
R = 12 cm and r = 9 cm. Volume of the shell = \( \dfrac{4}{3}\pi (12^3 - 9^3) = \dfrac{4}{3}\pi (1728 - 729) = 1332\pi \) cm³.
Cylinder: \( \pi x^2 (37) = 1332\pi \), so x² = 36 and x = 6 cm.
Diameter of the base = 2 × 6 = 12 cm.
In simple words: Equate the volume of the shell and the cylinder, then double the radius.

Teacher's Note:
1. 1332 ÷ 37 = 36.
2. The answer asks for the diameter, not the radius.

 

Question 12. A hemisphere of lead of radius 9 cm is cast into a right circular cone of height 72 cm. Find the radius of the base of the cone.
Answer:
Volume of the hemisphere = \( \dfrac{2}{3}\pi (9)^3 = 486\pi \) cm³.
Volume of the cone = \( \dfrac{1}{3}\pi r^2 (72) = 24\pi r^2 \).
24r² = 486, so r² = 20.25 and r = 4.5 cm.
In simple words: Equate the volumes and solve for r².

Teacher's Note:
1. √20.25 = 4.5.
2. (2/3)π(729) = 486π.

 

Question 13. The diameter of a sphere is 42 cm. It is melted and drawn into a cylindrical wire of diameter 2.8 cm. Find the length of the wire.
Answer:
Radius of the sphere = 21 cm; volume = \( \dfrac{4}{3}\pi (21)^3 = 12348\pi \) cm³.
Radius of the wire = 1.4 cm. If its length is L: \( \pi (1.4)^2 L = 12348\pi \).
L = \( \dfrac{12348}{1.96} \) = 6300 cm = 63 m.
In simple words: A wire is a long cylinder; equate the volumes.

Teacher's Note:
1. Convert cm to m at the end: 6300 cm = 63 m.
2. 12348 ÷ 1.96 = 6300.

 

Question 14. The diameter of a copper sphere is 18 cm. It is melted and drawn into a long wire of uniform cross-section. If the length of the wire is 108 m, find its diameter.
Answer:
Radius of the sphere = 9 cm; volume = \( \dfrac{4}{3}\pi (9)^3 = 972\pi \) cm³.
Length of the wire = 108 m = 10800 cm. Let its radius be r: \( \pi r^2 (10800) = 972\pi \), so r² = 0.09 and r = 0.3 cm.
Diameter of the wire = 0.6 cm.
In simple words: Wire: volume = πr² × length.

Teacher's Note:
1. Convert metres to centimetres before calculating.
2. Answer is the diameter, not the radius.

 

Question 15. A hemispherical bowl of internal radius 9 cm is full of water. Its contents are emptied into a cylindrical vessel of internal radius 6 cm. Find the height of water in the cylindrical vessel.
Answer:
Volume of water = \( \dfrac{2}{3}\pi (9)^3 = 486\pi \) cm³.
Cylindrical vessel: \( \pi (6)^2 h = 36\pi h \).
36h = 486, so h = 13.5 cm.
In simple words: Water volume stays the same when poured into another container.

Teacher's Note:
1. 486 ÷ 36 = 13.5.
2. No water is lost.

 

Question 16. A hemispherical tank, full of water, is emptied by a pipe at the rate of \( \dfrac{25}{7} \) litres per second. How much time will it take to empty half the tank if the diameter of the base of the tank is 3 m?
Answer:
Radius of the tank = 1.5 m. Volume = \( \dfrac{2}{3}\pi r^3 = \dfrac{2}{3} \times \dfrac{22}{7} \times (1.5)^3 = \dfrac{99}{14} \) m³.
1 m³ = 1000 litres, so the volume = \( \dfrac{99000}{14} \) litres, and half the tank = \( \dfrac{99000}{28} \) litres.
Time = \( \dfrac{99000}{28} \div \dfrac{25}{7} = \dfrac{99000 \times 7}{28 \times 25} \) = 990 seconds = 16 minutes 30 seconds.
In simple words: Volume of half the tank divided by the rate gives the time.

Teacher's Note:
1. Convert m³ to litres by multiplying by 1000.
2. 990 s = 16 min 30 s.

 

Question 17. The rain water from a roof of 44 m × 20 m drains into a cylindrical tank having a diameter of base 4 m and height 3.5 m. If the tank is just full, find the rainfall in cm.
Answer:
Volume of the tank = \( \pi r^2 h = \dfrac{22}{7} \times 2 \times 2 \times 3.5 \) = 44 m³.
Rain water on the roof forms a cuboid of base 44 × 20 and height h (the rainfall): 44 × 20 × h = 44.
h = \( \dfrac{44}{880} \) = 0.05 m = 5 cm.
In simple words: Rainfall depth = volume of water collected ÷ area of the roof.

Teacher's Note:
1. Treat the water on the roof as a thin cuboid.
2. Convert metres to cm at the end.

 

Question 18. The rain water from a 22 m × 20 m roof drains into a cylindrical vessel of diameter 2 m and height 3.5 m. If the rain water collected from the roof fills \( \dfrac{4}{5} \) of the cylindrical vessel, find the rainfall in centimetres.
Answer:
Volume of the vessel = \( \dfrac{22}{7} \times 1 \times 1 \times 3.5 \) = 11 m³.
Water collected = \( \dfrac{4}{5} \times 11 \) = 8.8 m³.
Rainfall h: 22 × 20 × h = 8.8, so h = 0.02 m = 2 cm.
In simple words: Collected water = 4/5 of the vessel; divide by the roof area.

Teacher's Note:
1. Roof area = 22 × 20 = 440 m².
2. 0.02 m = 2 cm.

 

Question 19. A solid right circular cone of height 60 cm and radius 30 cm is dropped in a right circular cylinder full of water, of height 180 cm and radius 60 cm. Find the volume of water left in the cylinder, in cubic metres.
Answer:
Volume of the cylinder = \( \pi (60)^2 (180) = 648000\pi \) cm³.
Volume of the cone = \( \dfrac{1}{3}\pi (30)^2 (60) = 18000\pi \) cm³.
Water left = (648000 − 18000)π = \( 630000 \times \dfrac{22}{7} \) = 1,980,000 cm³.
Since 1 m³ = 1,000,000 cm³, water left = 1.98 m³.
In simple words: The cone displaces its own volume of water.

Teacher's Note:
1. Convert cm³ to m³ by dividing by 10⁶.
2. Water left = cylinder − cone.

 

Question 20. Water is flowing through a cylindrical pipe of internal diameter 2 cm into a cylindrical tank of base radius 40 cm at the rate of 0.4 m per second. Determine the rise in the level of water in the tank in half an hour.
Answer:
Pipe radius = 1 cm. Speed = 0.4 m/s = 40 cm/s. In half an hour (1800 s) the length of water that flows = 40 × 1800 = 72,000 cm.
Volume of water = \( \pi (1)^2 \times 72000 = 72000\pi \) cm³.
In the tank: \( \pi (40)^2 h = 72000\pi \), so h = \( \dfrac{72000}{1600} \) = 45 cm.
In simple words: Water flowing out of a pipe forms a cylinder of length = speed × time.

Teacher's Note:
1. The pipe diameter is 2 cm, so its radius is 1 cm.
2. Keep all lengths in cm.

 

Question 21. Water is flowing at the rate of 6 km/h through a pipe of diameter 14 cm into a rectangular tank which is 60 m long and 22 m wide. Determine the time in which the level of water in the tank will rise by 7 cm.
Answer:
Pipe radius = 7 cm = 0.07 m. Speed = 6 km/h = 6000 m per hour.
Volume of water flowing per hour = \( \pi (0.07)^2 \times 6000 = \dfrac{22}{7} \times 0.0049 \times 6000 \) = 92.4 m³.
Volume needed for a 7 cm rise in the tank = 60 × 22 × 0.07 = 92.4 m³.
Time = 92.4 ÷ 92.4 = 1 hour.
In simple words: Compare the volume needed in the tank with the volume delivered per hour.

Teacher's Note:
1. Express everything in metres.
2. 7 cm = 0.07 m.

 

Question 22. Water in a canal, 5.4 m wide and 1.8 m deep, is flowing with a speed of 25 km/h. How much area can it irrigate in 40 minutes if 10 cm of standing water is required for irrigation?
Answer:
Speed = 25 km/h = 25000 m/h, so in 40 minutes the water flows \( 25000 \times \dfrac{40}{60} = \dfrac{50000}{3} \) m.
Volume of water in that length = 5.4 × 1.8 × \( \dfrac{50000}{3} \) = 162,000 m³.
Area irrigated × 0.1 m = 162,000 m³, so the area = 1,620,000 m².
In simple words: The canal water over 40 minutes forms a cuboid; spread it 10 cm deep.

Teacher's Note:
1. Convert 10 cm to 0.1 m.
2. Area = volume ÷ depth.

 

Question 23. A farmer connects a pipe of internal diameter 25 cm from a canal into a cylindrical tank in his field, which is 12 m in diameter and 2.5 m deep. If water flows through the pipe at the rate of 3.6 km/h, in how much time will the tank be filled? Also find the cost of water if the canal department charges at the rate of Rs. 0.07 per m³.
Answer:
Tank volume = \( \pi (6)^2 (2.5) = 90\pi \) m³.
Pipe radius = 0.125 m. Speed = 3.6 km/h = 3600 m/h. Volume flowing per hour = \( \pi (0.125)^2 \times 3600 = 56.25\pi \) m³.
Time = \( \dfrac{90\pi}{56.25\pi} \) = 1.6 hours = 1 hour 36 minutes.
Cost = 90π × 0.07 = \( 90 \times \dfrac{22}{7} \times 0.07 \) = 19.8, i.e. Rs. 19.80.
In simple words: Time = tank volume ÷ volume delivered per hour.

Teacher's Note:
1. 0.6 hour = 36 minutes.
2. Cost = volume (in m³) × rate.

 

Question 24. Water running in a cylindrical pipe of inner diameter 7 cm is collected in a container at the rate of 192.5 litres per minute. Find the rate of flow of water in the pipe in km/h.
Answer:
Volume per minute = 192.5 litres = 192,500 cm³.
Cross-section of the pipe = \( \pi r^2 = \dfrac{22}{7} \times 3.5 \times 3.5 \) = 38.5 cm².
Length of water per minute = \( \dfrac{192500}{38.5} \) = 5000 cm = 50 m.
Speed = 50 m/min = 50 × 60 = 3000 m/h = 3 km/h.
In simple words: Speed = volume per minute ÷ cross-sectional area.

Teacher's Note:
1. 1 litre = 1000 cm³.
2. Convert m/min to km/h by multiplying by 60 and dividing by 1000.

Free CBSE Study Guides: Class 10 Mathematics Chapter 12 Surface Areas and Volumes

Comprehensive Study Resources for Chapter 12 Surface Areas and Volumes

Access comprehensive study material for Chapter 12 Surface Areas and Volumes, including revision notes, concept maps, and high-probability questions. These resources are designed in alignment with the latest 2026 CBSE syllabus for Class 10 Mathematics to support effective exam preparation.

Understanding Marking Schemes

Built using official NCERT guidelines for Class 10 Mathematics, these materials provide reliable academic support. Integrating past examination questions and step-by-step solutions helps students understand official CBSE grading criteria.

Complete Revision for Mathematics

Maximize your grade potential by utilizing Class 10 Mathematics practice papers in tandem with these structured notes. All printable assignments and interactive mock tests on our platform are updated for the 2026 session and available free of charge.

FAQs

Where can I find the most advanced study material for CBSE Class 10 Mathematics for 2026-27?

The latest 2026-27 advanced study resources for Class 10 Mathematics are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.

What does the 2026-27 Mathematics study package for Class 10 include?

Our exhaustive Class 10 Mathematics package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.

Is this study material enough for both CBSE exams and competitive tests?

Yes. For Class 10, our resources have been developed to help you get better marks in CBSE school exams and also build fundamental strength needed for entrance tests including Competency Based learning.

How should Class 10 students use this Mathematics material for maximum marks?

in Class 10, students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.

Can I download Class 10 Mathematics study notes in PDF for offline use?

All CBSE Mathematics study materials are provided in mobile-friendly PDF. You can download and save them on your device.

Are the Class 10 Mathematics resources updated for the latest NEP guidelines?

Yes, our team has ensured that all Mathematics materials for Class 10 are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 CBSE syllabus.