Download Class 8 Science Textbook Solutions: Chapter 12 Friction
Access comprehensive textbook solutions for Chapter 12 Friction using the reference material for Class 8 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 12 Friction solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.
Check point 1
Question 1. Friction depends on what factors?
Solution.
Friction depends upon the nature of the surfaces in contact with each other and at the state of motion of the object on the surface. The irregularities on the surface lead to friction. Friction depends upon the surface of both the bodies in contact and not only one. The weight of the object, if the weight of the object is high then friction is also high.
Teacher's Note: Friction depends on the roughness of both surfaces in contact and how hard they are pressed together.
Exam Note: Roughness of surfaces and weight decide friction.
Question 2. State the cause of friction between two surfaces.
Solution.
The smoothness or polished degree of both the surfaces leads to cause of friction between two surfaces, if both the surfaces are well polished or smooth then the friction will be less but the friction can’t be zero practically. Also, the irregularities lead to friction.
Teacher's Note: Friction arises because surfaces are never perfectly smooth; microscopic bumps interlock.
Exam Note: Cause: irregularities of both surfaces.
Question 3. Frictional force always acts in the opposite direction to the direction of motion of body. Why?
Solution.
Friction always acts in the direction opposite to the motion of the body because friction is a force that arises from the irregularities of the surfaces in contact, so it opposes the relative motion between the two surfaces. Static friction acts on a body at rest only when a force is applied to it; if no force is applied, there is no friction.
Teacher's Note: Friction acts opposite to the relative motion between two surfaces, as shown for a sliding book.
Exam Note: Friction always opposes motion.
Check point 2
Question 1. Explain the types of frictions in short.
Solution.
Frictional force is of three types:–
I. Static Friction – It is the frictional force acting on a body when the body has not started moving yet and is at rest, also this friction is equal to the amount of force applied on the body and is variable to a certain limit.
II. Sliding Friction – It is the friction acting on the body when it is in motion and this friction is constant and is always less than the maximum value of static friction.
III. Rolling Friction – It is the constant friction acting on the body through wheels, it is the least amount of friction of all and is only applied when the body is moving.
Teacher's Note: Static friction acts before motion starts, sliding friction during sliding and rolling friction on rolling bodies.
Exam Note: Static > sliding > rolling friction.
Question 2. Differentiate sliding friction and rolling friction.
Solution.
The differences between Sliding and Rolling friction are:–
A. Sliding Friction – a) It is the friction acting on the plane surfaces or straight surfaces.
b) The motion of the body is accompanied by rubbing of surfaces.
c) Large amount of work is done.
B. Rolling friction – a) It is the friction acting on round objects like wheels which then acts on the body.
b) The motion is accompanied by changing the area of contact of the wheels.
c) Small amount of work is done.
Teacher's Note: Rolling friction is far smaller than sliding friction because rolling changes contact points instead of rubbing surfaces.
Exam Note: Rolling friction is less than sliding friction.
Question 3. Explain, how can we walk so much easily on the ground.
Solution.
As we know that nothing is frictionless and so is the ground and our feet, when we walk we push the ground backwards by our foot and the ground in reaction pushes us forward, because of friction present on the ground we are able to push the ground without slipping and hence it is easy to walk on the ground and also pushing it.
Teacher's Note: Friction between shoe and ground lets us push the ground back, and the reaction moves us forward.
Exam Note: Friction makes walking possible.
Question 4. Name three important disadvantages of friction.
Solution.
The three important disadvantages of friction are:–
1. Friction reduces the speed of moving objects by dissipating the energy.
2. Friction produces unnecessary heat and damages wheels and machines.
3. Friction causes injuries, when a person falls its skin gets peeled off due to friction.
Teacher's Note: Friction wastes energy, produces heat, wears out parts and can cause injuries.
Exam Note: Learn three disadvantages: speed loss, heat, wear.
Check point 3
Question 1. Name two methods of increasing friction.
Solution.
The two methods of increasing friction are:–
I. Making both the surfaces rough which is increasing the irregularities.
II. Making use of Sliding friction rather than Rolling friction.
Teacher's Note: Friction increases with rougher surfaces and when sliding replaces rolling.
Exam Note: Rough surfaces and sliding increase friction.
Question 2. Write a short note on term ‘groove’.
Solution.
Grooves mean cuts, grooves are made on a surface so that to increase the friction of the surface by increasing irregularity, for example on a blackboard when we rub the chalk due to friction the chalk gets printed on blackboard, if we increase the cuts the chalk will get more deposited than previous time.
Teacher's Note: Grooves are cuts made on a surface to increase irregularity and therefore friction.
Exam Note: Grooves increase friction, e.g. tyre treads.
Question 3. State the reason for sprinkling of fine powders on the carrom board.
Solution.
Powder is sprinkled on the carrom board because the powder fills the cuts in the wood of the board and hence reduces the irregularity and hence the friction reduces, so the powder is used to reduce the friction on the carrom board.
Teacher's Note: Powder fills the tiny roughness of the board and reduces friction so the striker slides smoothly.
Exam Note: Powder reduces friction on a carrom board.
Check point 4
Question 1. Ball bearings are used in machinery. Explain the reason.
Solution.
Ball bearings are used in machineries because due to friction, ball bearings change the type of friction experienced by the machines which means the sliding friction is replaced by rolling friction and as we know that rolling friction is always less than sliding friction, so ball bearings are used as they behave as wheels to roll and not to slip.
Teacher's Note: Ball bearings replace sliding friction between wheel and axle with smaller rolling friction.
Exam Note: Rolling friction is less than sliding friction.
Question 2. State the dependency of frictional force on the viscosity of fluid.
Solution.
Viscosity means simply the degree of thickness of liquid more the viscosity thicker is the liquid more friction will be offered by the liquid to an object moving through it. Hence more the viscosity more the friction of liquid.
Teacher's Note: Viscosity is a fluid's thickness; more viscous fluids offer more friction to moving objects.
Exam Note: Higher viscosity means more fluid friction.
Question 3. Is the friction exerted by air on moving bus?
Solution.
Friction offered by air is called air friction or air drag and is experienced by every moving object in order to oppose the motion, hence Yes bus experience air friction also.
Teacher's Note: Air resists every moving object; this fluid friction is called air drag.
Exam Note: Moving objects face air friction (drag).
Question 4. Name the factors on which the frictional force exerted by fluid on an object moving through it depends.
Solution.
The factors on which the frictional force exerted by a fluid on an object moving through it depends are:
i. The shape of the object moving through the fluid.
ii. The nature or viscosity of the fluid.
iii. The speed with which the object is moving.
Teacher's Note: Fluid friction depends on the object's shape, the fluid's nature or viscosity and the object's speed.
Exam Note: Fluid friction: shape, viscosity, speed.
Chapter Test
Question 1. Name the force which always opposes motion.
Solution.
Frictional force always opposes the relative motion between two surfaces and always acts opposite to the direction of motion.
Teacher's Note: Friction opposes the relative motion between two surfaces in contact.
Exam Note: Friction opposes motion.
Question 2. Out of static friction, sliding friction and rolling friction:
(a) Which one is the largest?
(b) Which one is the smallest?
Solution.
Static friction, Sliding friction, Rolling friction.
a) Maximum value of Static friction has largest magnitude or value of them all as it is variable.
b) Rolling friction is the smallest because of wheels used in it.
Teacher's Note: Maximum static friction is largest; rolling friction is smallest of the three types.
Exam Note: Static friction largest; rolling friction smallest.
Question 3. The surface of matchbox should be rough. Explain why.
Solution.
The surface of the matchbox should be rough because when we want to burn the matchstick we should rub it only once on that surface in order to increase it’s temperature so that it could burn in order to achieve that temperature the surface should have enough friction to raise the temperature at one rub.
Teacher's Note: Rubbing the match head on a rough surface produces enough friction heat to ignite it.
Exam Note: Rough surface gives friction heat to light the match.
Question 4. Oiling of the axis of a bicycle makes the bicycle moving easily. Comment along with the reason.
Solution.
Oiling or greasing the axle of a bicycle reduces the friction between the wheel and the axle. It makes the surfaces between them slippery because oil is a smooth liquid. When we pedal, the wheel moves freely on the axle and does not experience metal-to-metal rubbing.
Teacher's Note: Oil forms a thin film between the wheel and axle, reducing friction and wear.
Exam Note: Lubrication reduces friction.
Question 5. Write the use of friction.
Solution.
General uses of friction are:– i. Friction is used to apply brakes and move vehicles.
ii. Friction is used to walk.
iii. Friction is used to hold things.
iv. Friction is used to write on paper or blackboard.
Teacher's Note: Friction helps in braking, walking, holding objects and writing.
Exam Note: Friction is useful in brakes, walking, gripping.
Question 6. Write the condition under which the rolling friction increases.
Solution.
We can increase Rolling friction by making the surface, on which the wheel moves, rough and also we can use rubber wheels because rubber experiences more friction than other materials.
Teacher's Note: Rolling friction rises on rough surfaces and with rubber wheels, which grip more.
Exam Note: Rough surface and rubber wheels increase rolling friction.
Question 7. Give the name of material which reduces the force of friction.
Solution.
Lubricant is the name of the material which is used to decrease the amount of friction between two surfaces in contact. It is a liquid or type of oil actually.
Teacher's Note: A lubricant such as oil or grease forms a film that lowers friction between surfaces.
Exam Note: Lubricants reduce friction.
Question 8. Give one use of spring balance.
Solution.
A spring balance is a device that has a spring inside it. The stretch of the spring shows the force applied to it. Its main use is to measure force, such as the weight of an object, and it can also be used to measure friction.
Teacher's Note: A spring balance measures force by the stretch of its spring, for example weight or friction.
Exam Note: Spring balance measures force.
Question 9. Why is it difficult to walk on a smooth floor?
Solution.
It is difficult to move on a smooth floor because when we push the floor back there is no frictional force to stop our foot from going back and our foot keeps on going back by slipping on the surface and hence we do not get any reaction force from the ground to move forward, so it is difficult to walk on a smooth floor.
Teacher's Note: On a smooth floor friction is small, so the foot slips and the reaction needed to move forward is weak.
Exam Note: Less friction means slipping while walking.
Question 10. We always apply powder to a carom board. Why?
Solution.
We apply powder to carom board because the wood has a frictional surface and to reduce the friction powder is sprinkled on the board as the powder fills the gaps on board, so the striker moves smoothly and at large distance with even lower force.
Teacher's Note: Powder fills the gaps in the board surface, reducing friction so the striker slides easily.
Exam Note: Powder reduces friction on the board.
Question 11. Mention a reason which makes the steps of foot-over-bridges at railways stations to wear out slowly.
Solution.
The steps of foot over bridges at railway station gets wear out by time because when we walk the sole of our shoes gets plain and thin by time because it gets worn out and also the stairs or road also gets worn out due to friction there is rubbing between these surfaces and as a result there is worn out of both the surfaces by time but the material of shoes is softer than the stairs, so it gets worn out easily than that of stairs.
Teacher's Note: Steps wear down due to rubbing against shoes; friction wears both surfaces.
Exam Note: Friction causes wear and tear.
Question 12. Explain why does a man slip when he steps on a banana peel thrown on the road.
Solution.
The banana peel has a smooth, slippery surface. When we place our foot on it, the smooth surface in contact with the ground reduces the friction, and the peel slides forward even with a low force and takes our foot with it, so we slip.
Teacher's Note: A smooth, slippery peel reduces friction, so the foot slides.
Exam Note: Less friction causes slipping.
Question 13. Write in brief, how does a bicycle stop when its brakes are applied.
Solution.
When we pull the brake lever, the rubber brake pads attached to the frame grip the rim of the wheel (or the disc, in disc brakes). The motion of the wheel is opposed by friction between the rim and the rubber brake pads, so the wheel slows down and finally stops.
Teacher's Note: Brake pads press on the rim, and friction between them slows the wheel.
Exam Note: Brakes work by friction.
Question 14. Explain why car wheels often spin on icy road.
Solution.
Car tyre spins on icy road because of less friction on icy road and due to less friction the force exerted backward by the wheels does not get suitable forward reaction force by the floor and the car does not move forward properly and thus the car tyre slips rather than move along with the car and hence the tyre keeps on exerting force on the floor by spinning and slipping.
Teacher's Note: Ice is slippery so friction is low; wheels cannot get a forward reaction and spin.
Exam Note: Less friction on ice causes wheel spin.
Question 15. Some machines use streamlined shape to reduce friction. Name them.
Solution.
Streamline shape is used to reduce the friction by the objects moving in fluids(air and water). The general machines using Streamline shapes are:–
I. Airplanes.
II. Ships.
III. Bullet Trains.
IV. F 1 Cars.
All those objects which are pointed from forward to cut the air every time and get inside it and throw it backward like a bullet.
Teacher's Note: A pointed, smooth streamlined shape lets fluids flow past easily, reducing fluid friction.
Exam Note: Streamlined shape reduces drag.
Question 16. Explain the types of friction with examples.
Solution.
The three types of friction are:
A. Static Friction – It is the friction acting on a body when the body is at rest or has not started moving yet; it is variable in nature and is always equal to the force exerted by the person on it. It has the maximum value of all.
For example – A man pushing a heavy block on a rough surface, but the block has not started moving.
B. Sliding Friction – It is the friction acting on a body when it is in motion; it is constant and is always less than the maximum value of static friction.
For example – A man pushing a block when it is moving.
C. Rolling Friction – It is the friction acting on a wheeled body; the friction first acts on the wheels and then on the body. It is the least of all and is also constant.
For example – A person pushing a trolley at a shopping mall.
Teacher's Note: Static friction acts at rest, sliding friction during sliding and rolling friction is least.
Exam Note: Know three types with one example each.
Question 17. Write a short note on term ‘drag’. Explain why objects moving in fluids should have streamlined shape.
Solution.
Drag is also called air friction or fluid friction. It is experienced by all the objects moving. Fluid friction is experienced by all the objects moving in a medium generally liquid(water) is the medium, higher the viscosity higher is the drag offered by the medium. Drag forces depend upon velocity of the object moving through medium. Objects moving in fluids have streamline shape because this shape reduces the amount of friction experienced by the objects because this shape enables the object to cut and pass through the medium whether it is air or water, the streamline shape is like the shape of bullet it is pointed from forward so that it can cut the medium in front of it and can get pass through it.
Examples – Ship in water, Airplane in air, F1 cars on road these all have streamline shapes.
Teacher's Note: Drag is fluid friction on objects moving in air or liquid; streamlined shapes reduce it.
Exam Note: Drag depends on speed, shape, viscosity.
Question 18. In which ways friction between the two surfaces can be minimized?
Solution.
Friction between two surfaces can be minimized in the following ways:
I. Smoothening both the surfaces, which means reducing irregularity.
II. Lubricating the surfaces with oil or grease.
III. Using rolling friction rather than sliding friction.
IV. Making the body streamlined in fluids.
V. Making use of a less viscous medium or fluid.
Teacher's Note: Friction is reduced by smoothing, lubricating, using rolling, streamlining and less viscous fluids.
Exam Note: Smooth, lubricate, roll, streamline to cut friction.
Question 19. Explain with four examples that sometimes, force of friction is desirable.
Solution.
Force of friction is desirable in many cases for example:–
I. Stopping of vehicles – If there were no friction then we cannot stop our vehicles and the vehicles keeps on going and never stop but there is friction which helps us to stop our vehicles because it opposes motion always.
II. Writing – When we write on paper or blackboard then the pencil lead gets dragged on the paper due to friction and gets deposited on the site where we move it, if there were no friction then there would be no writing on paper with pencil.
III. Walking on ground – When we walk on the ground it is due to friction which gives us forward reaction force due to which we are able to walk and if there were no friction then we were not able to walk.
IV. Picking of objects – When we pick objects this is only due to force of friction because gravity is always acting on objects and if we pick an object it’s net force should be zero in order it to not to move.
Teacher's Note: Friction is desirable in stopping vehicles, writing, walking and holding objects.
Exam Note: Four useful friction examples with reasons.
Question 20. Write some disadvantages of force of friction.
Solution.
The disadvantages of force of friction are as follows:– i. As we know that friction acts always in opposite direction of motion, so friction slows down any moving object.
ii. Friction causes unnecessary heat when surfaces are rubbed against each other.
iii. Friction can cause damage to machines having moving parts because of wear and tear.
iv. Friction causes injuries when a person falls its skin gets peeled off due to friction only.
v. Friction makes it difficult to push objects according to mass when we slide them. More the mass more the friction.
vi. Friction cannot be finished completely but can be diminished to great extent.
Teacher's Note: Friction wastes energy, creates heat, wears machines and makes pushing harder.
Exam Note: Learn the disadvantages: heat, wear, energy loss.
Free study material for Science
Class 8 Mathematics: All In One Solutions for All In One Solutions Class 8 Science Chapter 12 Friction
Download All In One Solutions for Class 8
Access the complete chapter-wise PDF for All In One Solutions Class 8 Science Chapter 12 Friction. These structured All In One Solutions solutions for Class 8 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Detailed Calculation Guides for Class 8
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for Class 8 Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 8 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.