Xam Idea Solutions Class 6 Science Chapter 11 Electricity And Circuits Short Answer Questions

Official Textbook Solutions: Class 6 Science Chapter 11 Electricity And Circuits

Explore reliable textbook solutions for Chapter 11 Electricity And Circuits tailored for Class 6 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Science: Chapter 11 Electricity And Circuits

Access the complete solution PDF for Class 6 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions

Question 1. When the chemicals in the electric cell are used up, the electric cell stops producing electricity. The electric cell is then replaced with a new one. In case of rechargeable batteries (such as the type used in mobile phones, camera and inverters), they are used again and again. How? [NCERT Exemplar]

Solution.

Rechargeable batteries can be recharged by providing them appropriate current.

Teacher's Note: Rechargeable cells reverse their chemical changes when current is passed through them.

Exam Note: Mention recharging with suitable current.

Question 2. Why do bulbs have two terminals? [NCERT Exemplar]

Solution.

Bulbs have two terminals to connect the filament with the circuit so that the current can pass through it and complete the circuit.

Teacher's Note: Two terminals let current enter and leave the filament, completing the circuit.

Exam Note: Say terminals connect filament to the circuit.

Question 3. A fused bulb does not glow. Why? [NCERT Exemplar]

Solution.

In a fused bulb the filament is broken and the circuit is incomplete. The current will not flow and the bulb will not glow.

Teacher's Note: A fused bulb has a broken filament, so the circuit is open and no current flows.

Exam Note: Mention broken filament, open circuit.

Question 4. Paheli wanted to glow a torch bulb using a cell. She could not get connecting wires, instead, she got two strips of aluminium foil. Will she succeed? Explain, how. [NCERT Exemplar]

Solution.

Yes. Aluminium foils can act as connecting wires as it is a good conductor of electricity.

Teacher's Note: Aluminium is a good conductor, so foil strips can complete the circuit.

Exam Note: Answer yes; aluminium conducts.

Question 5. What are the essential components of an electric circuit?

Solution.

Connecting wires, bulb, switch and cell are the essential components of an electric circuit.

Teacher's Note: An electric circuit needs a cell, wires, bulb and switch.

Exam Note: List the four components.

Question 6. Why should you not touch electric appliances and switches with wet hands?

Solution.

Water is a good conductor of electricity and current passes very quickly through wet hands. Therefore, it can give us an electric shock.

Teacher's Note: Water conducts electricity, so wet hands can pass current and cause a shock.

Exam Note: Mention water conducts; keep hands dry.

Question 7. Write two precautions that you must follow while handling electricity.

Solution.

I. Wear rubber gloves or slippers. II. Never touch switches with wet hands.

Teacher's Note: Safe handling means insulating yourself and avoiding moisture near electrical devices.

Exam Note: Write two separate precautions.

Question 8. When a bulb is fused, it does not light up. Explain why?

Solution.

When a bulb is fused its filament breaks, which in turn breaks the electric circuit. Thus, current does not pass through it.

Teacher's Note: Fusing breaks the filament, opening the circuit so no current passes.

Exam Note: Mention broken filament, open circuit.

Question 9. Why does a cell stop producing electricity after sometime?

Solution.

When the chemicals in the electric cell are used up, the electric cell stops producing electricity. Since all the chemicals are used, no chemical reaction takes place which will produce energy.

Teacher's Note: A cell works by chemical reaction, which stops once its chemicals are used up.

Exam Note: Mention chemicals exhausted, no reaction.

Question 10. Write any two uses of electricity?

Solution.

Two uses of electricity are:

I. To operate pumps that left water from wells or from ground level to the roof top tank. II. Electricity makes it possible to light our homes, that makes our tasks easier.

Teacher's Note: Electricity powers lighting, pumps and many other daily needs.

Exam Note: Give two uses as points.

Question 11. You are provided with a bulb, a cell, a switch and some connecting wires. Draw a diagram to show the connections between them to make the bulb glow. [NCERT Exemplar]

Solution.

The cell, switch and bulb are joined one after another by connecting wires in a closed loop, with the switch closed (ON).

BulbCellSwitch

Teacher's Note: A complete closed loop of cell, switch and bulb lets current flow.

Exam Note: Draw a closed loop with switch ON.

Question 12. Will the bulb glow in the circuit shown below? Explain. [NCERT Exemplar]

Solution.

No. The bulb will not glow in this circuit because the switch is open and the circuit is incomplete. Due to this there will be no current flow.

Teacher's Note: An open switch leaves a gap, so the circuit is incomplete.

Exam Note: Open switch means no current, no glow.

Question 13. An electric bulb is connected to a cell through a switch as shown in figure below. When the switch is brought in ‘ON’ position, the bulb does not glow. What could be the possible reason/s for it? Mention any two of them.

Solution.

The reasons could be

I. the bulb is fused.

II. the cell is a used one.

III. break in connecting wire.

IV. loose connections. (Any two)

Teacher's Note: Any fault that breaks the circuit or drains the cell stops the bulb glowing.

Exam Note: Name any two faults from the list.

Question 14. A torch requires 3 cells. Show the arrangement of the cells, with a diagram, inside the torch so that the bulb glows. [NCERT Exemplar]

Solution.

The cells are placed one after another in a row, with the positive terminal of each cell touching the negative terminal of the next cell.

-+

Teacher's Note: Cells in a torch are joined end to end, positive to negative.

Exam Note: Place cells end to end, positive to negative.

Question 15. Paheli connected two bulbs to a cell as shown in the figure given below. She found that filament of bulb B is broken. Will the bulb A glow in this circuit? Give reason. [NCERT Exemplar]

AB

Solution.

No, bulb A will not glow as the circuit is not complete.

Teacher's Note: The bulbs are in one loop, so a broken filament breaks the whole circuit.

Exam Note: Broken filament breaks the circuit, so A will not glow.

Question 16. Which of the following arrangements A, B, C and D given below should not be set up? Explain, why. [NCERT Exemplar]

ABCD

Solution.

Arrangement A is not desirable and should not be set up. This will exhaust the cell very quickly.

Teacher's Note: In A a wire joins the cell terminals directly, draining the cell quickly.

Exam Note: A should not be set up: cell drains quickly.

Class 6 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 6 Science Chapter 11 Electricity And Circuits Short Answer Questions

Complete Math Solutions for Xam Idea Solutions Class 6 Science Chapter 11 Electricity And Circuits Short Answer Questions

Review detailed solutions for Class 6 Mathematics. The Xam Idea Solutions Class 6 Science Chapter 11 Electricity And Circuits Short Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Detailed Calculation Guides for Class 6

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 6 Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 6 Science?

They are chapter-wise solved questions from the book for Class 6 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 6 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 6 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 6 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 6 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.